Re: [SHR] latest unstable does really work???
Same here, but a least I don't have more echo on the phone. To set IPv4 from the openmoko terminal: ifconfig usb0 192.168.0.202 netmask 255.255.255.0 broadcast 192.168.0.255 I can ssh but can't ping google.com from the OM, any idea? I've tried to set the ip of my gateway machine (192.168.0.200) in /etc/ Resolv.conf, with no success. Alex On 30/01/2009, at 14:51, Tony Berth wrote: just installed the latest unstable and when booting, networking was fine but after re-start I can't ssh to FR any more. IPv4 is not set any more! Any ideas? Thanks Tony ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [SHR] latest unstable does really work???
I've tried, maybe it comes fron the internet share on my mac side? r...@om-gta02 ~ $ echo nameserver 208.67.222.222 /etc/resolv.conf r...@om-gta02 ~ $ ping google.com ping: bad address 'google.com' On 30/01/2009, at 15:46, kimaidou wrote: You can try this : echo nameserver 208.67.222.222 /etc/resolv.conf And then a ping www.google.com should work (it does for me) 2009/1/30 Alexandre Girard alx.gir...@gmail.com Same here, but a least I don't have more echo on the phone. To set IPv4 from the openmoko terminal: ifconfig usb0 192.168.0.202 netmask 255.255.255.0 broadcast 192.168.0.255 I can ssh but can't ping google.com from the OM, any idea? I've tried to set the ip of my gateway machine (192.168.0.200) in /etc/ Resolv.conf, with no success. Alex On 30/01/2009, at 14:51, Tony Berth wrote: just installed the latest unstable and when booting, networking was fine but after re-start I can't ssh to FR any more. IPv4 is not set any more! Any ideas? Thanks Tony ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [SHR] latest unstable does really work???
same result: r...@om-gta02 ~ $ ping www.google.com ping: bad address 'www.google.com' On 30/01/2009, at 17:22, kimaidou wrote: I think you should try to add the 3 w : ping www.google.com 2009/1/30 Alexandre Girard alx.gir...@gmail.com I've tried, maybe it comes fron the internet share on my mac side? r...@om-gta02 ~ $ echo nameserver 208.67.222.222 /etc/resolv.conf r...@om-gta02 ~ $ ping google.com ping: bad address 'google.com' ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: WSOD
Hi Ole, For the WSOD, I recommand you to use the SHR distribution. I had the same problem for a few month, killing any usuability of the phone, but since SHR have resolved it, it's far more enjoyable to use the phone. You can download it here: http://shr.bearstech.com/shr-testing/images/neo1973/ shr-image-om-gta02.jffs2 at the end of the list. Alex On 17/12/2008, at 13:10, Ole Kliemann wrote: Hi everyone! I have not been reading the lists lately, so I don't know if this is an old one. I have been suffering badly from WSOD. This means, often when I resumed from suspend the screen showed all white while other things still worked. Sometimes it recovered after some minutes and screen worked again, sometimes I waited for maybe 10 minutes then switched off the device. I had this problem since I got the device in July and I always thought this was a kernel problem. I tried about every kernel version so far but it was always the same. Now, GPS was not working on my device, so last week I finally returned it to my distributor and he sent me a new one. I am using the exact same kernel and distribution[1] that was giving my WSOD all the time on the old device (just like every kernel and distribution was given WSOD). But suspend/resume is now working flawlessly. No white screen ever! So this bug is highly hardware related after all? Replacing the hardware fixed it for me. Ole [1] http://qtextended.org/modules/mydownloads/visit.php?lid=98 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [testing] WSOD gone
Hi Andreas, That's a great news I was looking for :) Where to get and download this image? Cheers, Alex El 06/12/2008, a las 19:40, Andreas Cyberfrag Fischer escribió: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi All, Wohoo, after today's kernel upgrade the infamous WSOD seems to be gone for me. I rebooted the phone and am now running for several hours without encoutering WSOD. The phone seems to reliably wake up from suspend at incoming calls (tested only once, though) and performs quite fine after manual resume. I didn't test incoming SMS, yet. Anyway - good job guys. Now I only need a fix for the annoying echo to have a (in my point of view) fully functional phone. Regards, Andreas -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkk6xxAACgkQ5Fl7TYZQYwHOjACfSVAencuriygF19EAo7rspiNQ XbsAoK+OQb3/58JfNy8cdDBza5TsZokz =DtTE -END PGP SIGNATURE- ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Receiving empty sms after registration
Hi, I receive an empty sms each time I register with my phone provider (Bouygues in France, Simio in Spain), with an origin address like _@. Has anybody got the same behavior? Is it coming from the phone or from the provider? Also, sms duplicate in the message box each time the phone switch on, I suppose it's a bug, but I'm not sure where to report it. Have a nice day, Alex ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[FOM 20081023] Receiving empty sms after registration
Using FDOM 20081023, but I think I remember this behavior with older image, can't confirm it. Is there a way to get the debug log of the Message app? El 31/10/2008, a las 13:24, Alastair Johnson escribió: Alexandre Girard wrote: Hi, I receive an empty sms each time I register with my phone provider (Bouygues in France, Simio in Spain), with an origin address like _@. Has anybody got the same behavior? Is it coming from the phone or from the provider? Also, sms duplicate in the message box each time the phone switch on, I suppose it's a bug, but I'm not sure where to report it. Please say which image you are using when reporting things. It is difficult for people to reproduce or to help you if you don't. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Mac USB Networking
Hi, It's nt our router address you need to put ine the USB network config, it's the openmoko IP (described here as a router), because it's configure as 192.168.0.202 in its conf. No crashes yet with opkg on usb networking, a bit slow but internet sharing works nice :) Alex El 12/09/2008, a las 8:05, Christ van Willegen escribió: Hi, On Fri, Sep 12, 2008 at 1:46 AM, Alexandre Girard [EMAIL PROTECTED] wrote: Router: 192.168.0.202 (not actually needed, OS X can figure this out for itself, unless you have other conflicting configurations) Are you sure this is the correct address? I 'had' to put in 192.168.62.1 (my router's address) to get it to work. * Some crash on the mac if you boot/shutdown with the usb plugged Also, lots of crashes if you do opkg upgrade (at least, I've had lots of problems with that). Christ van Willegen -- 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Mac USB Networking
Hi Lally, Here are some notes I took when configuring the USB networking, it's not really different from the wiki page. It's working great on my macbook ( and with image 2008.8), it might help you: * Install AJZaurusUSB driver on mac: http://www.dsitri.de/wiki.php?page=AJZaurusUSB * After reboot, configure USB networking in Network pref panel: IP-V4: manual IP-Addr: 192.168.0.200 (you can use anything in 192.168.0.* but OM is configured by default to use 192.168.0.200 as the external gateway) Subnet: 255.255.255.0 (should be the default - see tip below if have issue with these settings) Router: 192.168.0.202 (not actually needed, OS X can figure this out for itself, unless you have other conflicting configurations) * Connect openmoko and: ssh [EMAIL PROTECTED] * hotplug problem, disconnected network - change usb port, reboot computer * Some crash on the mac if you boot/shutdown with the usb plugged Alex El 12/09/2008, a las 0:25, Lally Singh escribió: Hey all, Just got the FR yesterday (nice physical design). I installed the patched network driver listed under Apple CDC Ethernet driver 10.5.x, and the Networking pane shows a USB serial connection, but no ethernet. It also does not show up as enXX in ifconfig. This is OS X 10.5.4. I can use dfu-util fine. But, I haven't found a way to get the wifi working yet, so the device is networkless. Anyone else have a mac with a working usb networking setup? What'd you do? I'll happily update the wiki with the result. Here's my ifconfig when the device is plugged in (this was right before I did the dfu-util reflash): lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff00 inet6 ::1 prefixlen 128 inet6 fd5d:a24b:2849:fed7:217:f2ff:fece:65ba prefixlen 128 gif0: flags=8010POINTOPOINT,MULTICAST mtu 1280 stf0: flags=0 mtu 1280 en0: flags=8863UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST mtu 1500 ether 00:17:f2:ce:65:ba media: autoselect status: inactive supported media: autoselect 10baseT/UTP half-duplex 10baseT/UTP full-duplex 10baseT/UTP full-duplex,hw-loopback 10baseT/UTP full-duplex,flow-control 100baseTX half-duplex 100baseTX full-duplex 100baseTX full-duplex,hw-loopback 100baseTX full-duplex,flow-control 1000baseT full-duplex 1000baseT full-duplex,hw-loopback 1000baseT full-duplex,flow-control none fw0: flags=8822BROADCAST,SMART,SIMPLEX,MULTICAST mtu 2030 lladdr 00:19:e3:ff:fe:22:6b:5c media: autoselect full-duplex status: inactive supported media: autoselect full-duplex en1: flags=8863UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet6 fe80::219:e3ff:fe04:85c2%en1 prefixlen 64 scopeid 0x6 inet 10.0.1.2 netmask 0xff00 broadcast 10.0.1.255 ether 00:19:e3:04:85:c2 media: autoselect status: active supported media: autoselect vmnet8: flags=8863UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 172.16.1.1 netmask 0xff00 broadcast 172.16.1.255 ether 00:50:56:c0:00:08 vmnet1: flags=8863UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 172.16.74.1 netmask 0xff00 broadcast 172.16.74.255 ether 00:50:56:c0:00:01 Thanks in advance! -ls -- H. Lally Singh Ph.D. Candidate, Computer Science Virginia Tech ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: illume-config-illume on 2008.8-updates
Thanks for the hint, it works great to get back the illume keyboard! Only problem: my openmoko is going suspend after 30 sec, even with the suspend off in Settings. If it might help you to get the source of the problem, I'm seeing a giant X befre it goes suspend. Hope it´s not a big issue... Alex El 01/09/2008, a las 15:25, yves mahe escribió: yves mahe wrote: yves mahe wrote: I need to do : opkg -force-overwrite install http://downloads.openmoko.org/repository/testing/all/illume-config-illume_0.0+svnr35693-r13_all.ipk After a reboot and even with export QTOPIA_NO_VIRTUAL_KEYBOARD=1 in /etc/X11/Xsession.d/89qtopia , I get no illume's keyboard nor tools icon in the upper left corner. After rm -rf ~/.e/e/config/illume as said by Rasterman [1], the tools icon (wrench) appears and is functional but always no illume's keyboard. [1]: http://lists.openmoko.org/pipermail/community/2008-September/028949.html Yves Mahé I spoke too quickly : I did'nt see that illume-config has now a new option : Keyboard which default is None. Choosing Default activate the illume's keyboard. Thanks Raster To resume on 2008-8 update : 1. opkg install -force-overwrite install http://downloads.openmoko.org/repository/testing/all/illume-config-illume_0.0+svnr35693-r13_all.ipk 2. opkg install illume-config (get qwery button) 3. echo 'E_PROFILE=-profile illume' /etc/enlightenment/ default_profile (switch to the illume profile from asu) 4. rm -rf ~/.e/e/config/illume 5. add export QTOPIA_NO_VIRTUAL_KEYBOARD=1 in /etc/X11/Xsession.d/89qtopia 6. Reboot It should work Yves Mahe ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: 2008.8 / Suspend and Illume [Was: illume-config-illume on 2008.8-updates]
I've solved the problem going into Illume Settings, then Power, and setting to OFF the 2 parameters. I still got the screensaver, but can reactivate easily just by touching Alex El 01/09/2008, a las 19:45, François TOURDE escribió: Le 14123ième jour après Epoch, yves mahe écrivait: Alexandre Girard wrote: Thanks for the hint, it works great to get back the illume keyboard! Only problem: my openmoko is going suspend after 30 sec, even with the suspend off in Settings. If it might help you to get the source of the problem, I'm seeing a giant X befre it goes suspend. Hope it´s not a big issue... Alex Already discussed in thread Om2008.8 - latest update - FR suspends after 30 secs - unconditionally Yes, even using a non-zero return code from a apm proxy shell (/etc/apm/event.d/xxx). I've tested it and... it fails :'( -- Le mariage est la seule aventure ouverte aux lâches. -+- Voltaire -+- ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community