Re: Freerunner won't charge
01.07.2011 17:13, Ronald Tallent пишет: So, there's no way to fix this thing? If I need to take it to an electronics repair shop to get it fixed I can, just need to know what part(s) will need to be repaired/replaced. Anyone know were I can get hold of schematics for the mainboard? If it's a simple repair proceedure I might be able to do it myself even. --Ron ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community It can be software bug. I had that on fresh shr about 3 month ago. Rolling back cured ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Have I fried my freerunner?
04.03.2011 06:27, John O'Hagan пишет: On Tue, 1 Mar 2011, Thomas HOCEDEZ wrote: On Tue, 1 Mar 2011 13:16:54 + John O'Hagan resea...@johnohagan.com wrote: Hi, After a couple of years of fairly trouble-free qtmoko-FR use, I used a cheap in-car charger on a recent trip. The charger died, and the FR itself began exhibiting a number of odd behaviours such as not coming back from suspend, indicating charging status when it was not charging, crashing, and after a couple of days, not booting into qtmoko at all. Instead, I get an error like debugfs dir creation failed -19, then a Debian login prompt. Unfortunately, I haven't been able to ssh into the FR to investigate, as it doesn't show up on my debian laptop as usbX or ethX, only as /dev/ACM0, so I'm stuck as to how to get the USB networking going. [...] Woo, don't smells good. But I would try to reflash it with QtMoko once again. or with a totally different distro such as Android. The secodn one has an installer that verbose the output of the flashing progress. This way, you can see if it fails to write on some clusters on the flash. Let us know the results ! Thanks for your reply. I'm a little confused about what is going on in my FR. The fact that I'm getting a Debian login prompt means it is actually booting, right? So the problem must be in subsequent stages of initialising Qtopia? Because it's not showing up as /dev/ethX or /devusbX as I mentioned, I haven't been able to re-flash it or even back it up with neotool, which doesn't find the device. To be honest it's been a long time since I flashed it because I've been updating qtmoko using apt-get, so I may be doing it wrong. Any advice how to ssh into the freerunner in theses circumstances? Regards, John ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Use another sd card with different distro if possible ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
slow upgrades in shr
anybody knows why upgrades became veeery slw in shr? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Always Innovating
01.11.2010 16:41, Ed Kapitein пишет: Hi All, A while ago there was intrest in the MID of always inovating. They seem to be shipping the devices as of today. [1] So get them while they'r fresh ;-) Kind regards, Ed [1] https://www.alwaysinnovating.com/store/home.php ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Did they add GSM/3G ? or something other features? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [GTA04] When is the next and more powerful openmoko releasing
for the light of our leds we could make grids and holes... or we could also do an all transparent case (I'd love to see trough to view the electronic inside) sounds cool ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
shr: Can't open display
booting shr-u from nand: it freezes on shr logo. If boot from nand loader I see: Can't open display message... why my fr stops working ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: New Phone Project (MiniMoko) : Which functionalities ?
09.10.2010 16:56, Alfa21 пишет: 2010-10...@10:52 Timo Jyrinki 2010/10/6 giacomo 'giotti' mariani: Looks like it miss USB connectivity and I need SSH strongly! Well SSH over Bluetooth personal area network works just fine, but indeed I'd also like USB port for charging and connecting other devices (host mode) please keep in mind that there is an European directive about that: http://phandroid.com/2009/06/30/microusb-becomes-european-standard-in-2010/ http://www.gizmodo.com.au/2009/02/european_commission_pushing_microusb_standard_for_mobile_phone_chargers-2/ I intended we _MUST_ include the microusb for any new mobile phone if it has to be sold in EU. and if we do not strictly must, it's a clever solution because: - you do not have to sell also the ad-hoc charger with the new hardware. - an user can easily find a compatible charging source when not at home (eg. friends, colleagues, any computer, car's usb socket...) btw microusb is quite thin, so maybe we can put it side by side to the 40pin connector using both sides of the MID's pcb. Dudes, what you think about normal usb instead microusb? many devices can be easily plugged into the phone. Not for long usage of course. flash drives, tv tuners, keyboard, gamepad, etc... ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: We can have Help from Always Innovating !
05.10.2010 15:56, Thomas HOCEDEZ пишет: On 20/09/2010 17:22, Thomas HOCEDEZ wrote: Le 20/09/2010 16:26, Maksim 'max_posedon' Melnikau a écrit : Adding GSM to MID-device definitely will make this device extra-cool. Does somebody have idea how GSM could be added there? Voice is most important feature for me. 3G and so on, could be connected to touchbook part. May be its possible attach some gsm board? (FR's or others). Maksim In fact, I think I will try to reach them. I'll give you the answer asap. Hang on dudes, please sit cumfortably, and read this message slowly ! This is the answer of a message I sent A.I. to try to find a way to work with them. - Hello Thomas, Thank you for your interest in our products. This can definitely be an interesting opportunity. As an early-stage startup, we don't have that much money and time to give upfront, but the idea remains seducing, and we may share what's already done to help things to go on. We obviously know Openmoko's Freerunner, but didn't play with it really much, nor know the team behind this device. How do you imagine things from your point of view: what do you have to bring into such a shared project, and how do you see the working-together process? Best, Alexandre - Always Innovating Team --- Tada ! Everythnig is now open to find a way to mix Openmoko V4 project with the base of the A.I.'s MID. As I said earlier, their specs are online, and the GTA04 project is progressing fast, nut with a litlle help on hardware it could be faster ! I want to answer Alexandre (I think he is the one from the videos), this week, to give a first clue on how we wanted to work. So, Let's get imaginative : it's a brainstorm session ! Asthro, so happy ! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community I think to have 5 or 7 mpx back camera will be very nice feature. As for me, this is very important feature. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: New Phone Project (MiniMoko) : Which functionalities ?
06.10.2010 19:41, Thomas HOCEDEZ ?: Hi, As you might have read, Always Innovating (A.I.), is opened to think about a collaboration between them and us (Openmoko community) to build a phone based on their MiniBook. This device is a MID, without phone capabilities (except VoIP). So the idea is to build something together on that basis. I don't want AT ALL to shortcut GTA04 project, which is vital for everyone, so the main idea would be to improve a bit the MiniBook, generating a lite version of the GTA04. By lite, I suggest not to overload the bill motherboard with extra features that GTA04 will bring. More, The MiniBook have to stay an A.I. product, this mean, it must be linkable to the others as it does today. For information, MiniBook has already impressive specs : * TI http://www.ti.com cortex-A8 with 3D and video acceleration * 512MB (RAM) + 256MB (NAND) Memory * Main storage: 8GB microSD card * 480x320 3.5 capacitive touchscreen * 30fps VGA front webcam * Wifi 802.11 b/g/n, Bluetooth class 2.1 * Video output HDMI HD * Two high-quality stereo speakers * Internal microphone * Headphone jack * 3-dimensional accelerometer * One 1500 mAh battery * Bi-color silver/black case * 64mm x 106mm x 9.3mm * Secured attachment of the MID into a Touch Book Table There's nothing much to improve, nothing to remove, just adding GSM/3G chip. Nikolaus Schaller pointed the OPTION GTM501, which is a brilliant little chip ! And if we use the same one, the porting of distros/software will be easier from one machine to another. So, the first question is : What to add for this project being interresting ? Those will be minimal functions (forget Wimax, 4G, coffe machines or color printer ...). Second question : Debian is able to run on such a device, but does developpers of other distributions can tell if it would be possible to port their on it ? Third question : On the basis we have a 'paper' version of the phone, is there anyone able to give a hand to AI for the integration of new components on the board or do we let AI do the major part of the job ? (this way, we only would be 'consultants' for them). Thanks for your interest. Thomas. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community GPS(I highly use it outdoors), 3G, 5-7 mpx camera(It would be nice if you always have camera with you) on back, buttons for increase/decrease volume. Better screen resolution is less important, but I think 800x480 now is standard for such device. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Help from Always Innovating ?
04.10.2010 17:08, Thomas HOCEDEZ пишет: On 04/10/2010 05:20, Chuck Norris wrote: 03.10.2010 21:05, Joshua Judson Rosen пишет: Alfa21 freerun...@my.is.it writes: 2010-09...@00:16 Chuck Norris I've asked them about missing this feature. Here are answer: We do not have a 3G or GSM option because we do not want to force a subscription on customers. Instead we want to focus on using wifi and free Skype calls. force subscription?! LOL... maybe they do not know what actually the word option means? fool or fail? ;) Well, `not wanting to force subscriptions' is actually the right answer if it would have been an `either/or' choice. More probably, it's because it's just not viable to include it in a device that size at that price-range--there have been in-depths discussions about this as it pertained to the FreeRunner, previously; they're probably still applicable. As far as the full-sized tablet goes, you could look into getting a UMTS/HSDPA/whatever USB stick to connect to one of those internal USB ports. I've seen ones that may be small enough for as low as $50 US, though it's not obvious how well they'd work from inside the tablet. last answer from Always Innovating to me was: Thank you for your feedback. We are aware that many customers wish to have a GSM option available, and we do our best to satisfy as many customers as possible. Unfortunately, we currently do not have any plans to release a version of the Mini Book with GSM capabilities. If that possibility opens up to us in the future, we will be sure to make note of it on our website. Argh, So sad Though, I'd like to know if the minibook is also Opensource hardware, so we can investigate on the way to insert a canibalized usb stick... Asthro, Always inventive ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community It would be very cool... ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Help from Always Innovating ?
03.10.2010 21:05, Joshua Judson Rosen пишет: Alfa21 freerun...@my.is.it writes: 2010-09...@00:16 Chuck Norris I've asked them about missing this feature. Here are answer: We do not have a 3G or GSM option because we do not want to force a subscription on customers. Instead we want to focus on using wifi and free Skype calls. force subscription?! LOL... maybe they do not know what actually the word option means? fool or fail? ;) Well, `not wanting to force subscriptions' is actually the right answer if it would have been an `either/or' choice. More probably, it's because it's just not viable to include it in a device that size at that price-range--there have been in-depths discussions about this as it pertained to the FreeRunner, previously; they're probably still applicable. As far as the full-sized tablet goes, you could look into getting a UMTS/HSDPA/whatever USB stick to connect to one of those internal USB ports. I've seen ones that may be small enough for as low as $50 US, though it's not obvious how well they'd work from inside the tablet. last answer from Always Innovating to me was: Thank you for your feedback. We are aware that many customers wish to have a GSM option available, and we do our best to satisfy as many customers as possible. Unfortunately, we currently do not have any plans to release a version of the Mini Book with GSM capabilities. If that possibility opens up to us in the future, we will be sure to make note of it on our website. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Help from Always Innovative ?
21.09.2010 19:35, Thomas HOCEDEZ пишет: Le 21/09/2010 12:54, Chuck Norris a écrit : 20.09.2010 21:26, Maksim 'max_posedon' Melnikau пишет: Adding GSM to MID-device definitely will make this device extra-cool. Does somebody have idea how GSM could be added there? Voice is most important feature for me. 3G and so on, could be connected to touchbook part. May be its possible attach some gsm board? (FR's or others). Maksim ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Yeah, 3G will be killer feature! I really like their concept of mid inside tablet inside netbook. But why without GSM? That's a question ! They have a killer MID, but without any 'mobile' connectivity... They may have forgotten, that's the only thing I see. I've asked them about missing this feature. Here are answer: We do not have a 3G or GSM option because we do not want to force a subscription on customers. Instead we want to focus on using wifi and free Skype calls. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Help from Always Innovative ?
20.09.2010 21:26, Maksim 'max_posedon' Melnikau пишет: Adding GSM to MID-device definitely will make this device extra-cool. Does somebody have idea how GSM could be added there? Voice is most important feature for me. 3G and so on, could be connected to touchbook part. May be its possible attach some gsm board? (FR's or others). Maksim ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Yeah, 3G will be killer feature! I really like their concept of mid inside tablet inside netbook. But why without GSM? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Happy Programmers' Day!
Thank you, Patryk! And you too! :) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
shr in qemu
I want to test netsukuku on my neo. So I need stackless python. I cannot compile it with OpenEmbedded for shr. And I have new idea - compile it in shr in qemu. Does anybody know how to run shr in qemu? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: shr in qemu
22.06.2010 17:40, Martin Jansa пишет: On Tue, Jun 22, 2010 at 05:34:21PM +0700, Chuck Norris wrote: I want to test netsukuku on my neo. So I need stackless python. I cannot compile it with OpenEmbedded for shr. And I have new idea - compile it in shr in qemu. Does anybody know how to run shr in qemu? Hi, you can try to build DISTRO=shr MACHINE=qemuarm image with OpenEmbedded and then run it in qemu or try normal image with patched qemu http://wiki.openmoko.org/wiki/Qemu Regards, Hi! I have patched qemu. So how can I get mtdblock image? Do I need concatenate contents of /dev/mtdblock0 + /dev/mtdblock1 ... + /dev/mtdblock6 of my neo? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
libmokoui2
Hi, all! I'm writing transparent fullscreen keyboard in gtk. So I need finger scroll control for some windows. I googled moko-finger-scroll widget but I cannot find something like official site of libmokoui2... Maybe anybody here know where I can get last sources of libmokoui2? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: libmokoui2
17.06.2010 05:07, Michael 'Mickey' Lauer пишет: Am Mittwoch, den 16.06.2010, 23:56 +0700 schrieb Chuck Norris: Hi, all! I'm writing transparent fullscreen keyboard in gtk. So I need finger scroll control for some windows. I googled moko-finger-scroll widget but I cannot find something like official site of libmokoui2... Maybe anybody here know where I can get last sources of libmokoui2? http://svn.openmoko.org/trunk/src/target/OM-2007.2/libraries/libmokoui2/ Is kinetic scrolling _still_ missing in Gtk+? It seems to me it is so... ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
palm pre
Does anybody know if it is possible buy locked palm pre and install linux into? Will gsm or palm itself work or not? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
FR as wifi access point
Is it possible make FR act as wifi access point? Which utils can help? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
cellhunter problem after upgrade in shr-u
Now my cellhunter cannot check cellid. On pressing button check cellid I have in console: Traceback (most recent call last): File /usr/bin/cellhunter.py, line 225, in check_cellid while len(self.cell_la) 4: TypeError: object of type 'dbus.Int32' has no len() ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
MeeGo and oFono
People, what are you think about MeeGo/oFono on FreeRunner? Maybe someone compiled it for FreeRunner? Or just is it interesting idea to have meego/ofono for FR? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: bluetooth
07.05.2010 16:42, Paul Fertser пишет: Hi, Is there any particular reason you write off-list? On Fri, May 07, 2010 at 03:40:38PM +0700, Chuck Norris wrote: 27.04.2010 10:59, Paul Fertser пишет: Chuck Norris norris.ch...@mail.ru writes: Is it only possible configure bluetooth on linux (bluez4) through dbus? Here's the definitive and working guide, i've tested all that steps myself. http://wiki.openmoko.org/wiki/Manually_using_Bluetooth#Networking Is it applicable to bluez3 only? bluez3 and bluez4 are mixed in this page... so it quite difficult to understand which version they mean... :( Really? I thought i'd written everything crystal clear :/ so, I make script on FreeRunner ... but I successfully paired desktop with FR sing emtooth and kbluetooth and now I don't know what should I do to get bnep0 or somehow create network What about the trust? I wonder what else could have gone wrong, it all seemed so easy after i figured i need to not release the bus... sorry for off-listing. I haven't noticed that messanger change from field :) about crystal clearness: here is quote Information about bluez4 networking ... Bluetooth networking concepts -This HOW-TO- is directly applicable -only to bluez3- but still worth reading to understand PANU/GN/NAP roles So, finally I've configured bluetooth network through blueman and /etc/network/interfaces file on FreeRunner... but it need to be logined on desktop to work - no automatic connection... :( about python script - I told him wrong hw address, and now problem have changed. Now script writes Networking established, exit the shell to end this session and in half of second prints Networking released I think line os.spawnl(os.P_WAIT, os.environ['SHELL']) is root of evil on my FR. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: GameRunner distribution
30.04.2010 01:05, Rafael Ignacio Zurita пишет: Hello, GameRunner is an Openmoko Linux distribution. It aims convert the Freerunner open mobile phone in a Linux-based handheld game console. It is simple, and contains cool and suitable open source games for Linux mobile devices. http://gamerunner.sourceforge.net/ We have been working in this idea for a couple of months (in 2009), improving current openmoko games, and writting a game control useful for any game. Our first idea is always to have with us a SD full of games to play. Because the last two months we did not do much, I am announcing it, so other gamers can try it. All the games which use the new gamecontrol does not work well the first time you run these. After, all go okey. Moreover, we need to improve that general game control that we are writting, because it is not so cool yet. But well, you can play if you know well it :) For other games we have worked improving speed as well. If we get some free time to continue we will add super nintendo emulator (which we already have tested) and new versions of the new game control. After, we'll add more games specifically built for this game distro. The web site has some docs as well about our work. Cheers -- Rafael Ignacio Zurita ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Good idea! I have another one: turn freerunner to to something like gamepad, it has accelerometers - so it can emulate sword or tennis racquet for games ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
bluetooth
Can someone point me in docs or show configs how to configure bluetooth network with FreeRunner and my linux box(I have gentoo). I tried read wiki.bluez.org but without success... :( Is it only possible configure bluetooth on linux (bluez4) through dbus? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
player
since intone says $ intone db ver 63 FATAL: Module snd_pcm_oss not found. ERR:elementary elm_widget.c:1121 _elm_widget_type_check() Passing Object: 0x1700a0, of type: 'genlist' when expecting type: '(unknown)' ERR:elementary elm_widget.c:1121 _elm_widget_type_check() Passing Object: 0x1700a0, of type: 'genlist' when expecting type: '(unknown)' Segmentation fault I want to ask: what player do you use? I want listen music too :) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: MC Navi
01.04.2010 15:31, Mike Crash пишет: Hello, I'm going to release new version of MC Navi and I want to make maps available for direct download. So I want to ask, what country do you need? Second question - what do you prefer, car navigation or outdoor navigation? Just to know, what to do next... Thanks Mike Hi, Mike! Country - russia prefer - outdoor ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
fullscreen transparent keyboard
I think it would be nice to have fullscreen transparent keyboard instead of small keyboard in the bottom that eats screen space. So anybody know application that fit my needs? I googled... but found nothing interesting. I've begun developing my own virtual keyboard. I've created sample gtk application - transparent window with one button that sends a to X. Will my keyboard be useful for anybody if I'll continue creating it? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: fullscreen transparent keyboard
ri...@happyleptic.org пишет: Here is, I think, exactly what you ask for : http://gitorious.org/kbosd Easy to use, easy to hack. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Thanx :) But it's not exactly what I need. Keys of that keyboard are not transparent as I saw. Also keyboard must determine portrait/landscape and resize to whole screen(but it can be coded). ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: fullscreen transparent keyboard
Timo Juhani Lindfors пишет: Chuck Norris norris.ch...@mail.ru writes: application that fit my needs? I googled... but found nothing With xcompmgr and transset you can make any window transparent. This works for example with the xvkbd keyboard. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community xvkbd is nice. I'll try to make it transparent with transset. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: fullscreen transparent keyboard
Chuck Norris пишет: Timo Juhani Lindfors пишет: Chuck Norris norris.ch...@mail.ru writes: application that fit my needs? I googled... but found nothing With xcompmgr and transset you can make any window transparent. This works for example with the xvkbd keyboard. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community xvkbd is nice. I'll try to make it transparent with transset. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community cannot force bitbake to compile xvkbd. This keyboard uses xmkmf for creation Makefile. So I don't know how to run xmkmf properly in bb recipe... ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
How to import notes into new opimd database?
I used notes a lot... Does anybody know how can I get my notes back? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
shr-u sound problem
After yesterday update in my shr-u I can't hear anything during calls and peer don't hear me, only if switch speaker to 'on' on call screen it becomes possible to talk. Please help fix this issue ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: cannot run phonelog.
sam tygier пишет: On 14/03/10 10:09, Chuck Norris wrote: $ phonelog sounds similar to http://shr-project.org/trac/ticket/1004 but in #1004 there was an int that should have been a float, and you have something that should have been an int. sam ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Problem was in PISI. When I converted contacts from sim to opimd through Settings-Other-Sim-Manager my phonelog starts works. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Debian,QtMoko] X server and rotation
Radek Polak пишет: Hi, i have been struggling for some time to get X server working in landscape mode. I was trying: - Xglamo with xrandr - screen always goes white, reboot needed - Xglamo -screen 480x...@90 - does not work either, screen is somehow shifted - Xorg with fbdev driver and CCW option in xorg.conf - seems to have no effect - Xfbdev - does not support tslib in debian Yesterday i recompiled Xfbdev package with tslib support and now it seems to be working. For running the X server i do: Xfbdev -retro -screen 480x...@90 -mouse tslib,,device=/dev/input/event1 But still it's not perfect. I am trying to run scummvm on this Xserver: export DISPLAY=:0 scummvm but the Xserver segfaults. But I have found out that if start matchbox window manager before scummvm it works. So i have now this script: neo:~# cat /bin/scummvm.sh #!/bin/sh matchbox-window-manager sleep 5 scummvm I am doing this on debian testing. My Xfbdev with tslib support is here [1]. I build it with: apt-get build-dep xserver-xfbdev apt-get source xserver-xfbdev edited debina/rules and replaced disable-tslib with enable-tslib dpkg-buildpackage -b Hope this helps someone. Anyone has better way how to do this? Regards Radek [1] http://activationrecord.net/radekp/pub/xserver-xfbdev_1.7.5-1_armel.deb ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community with this kernel from http://lists.openmoko.org/nabble.html#nabble-td4274107|a4274107 http://lists.openmoko.org/nabble.html#nabble-td4274107%7Ca4274107 shr and hackable:1 begin toggle rotation with xrandr(shr) and swap rotation option under hackable:1. Also graphics became faster. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
where is russian illume keyboard
I've installed it via opkg install illume-keyboard-russian illume-keyboard-russian-terminal but now I cannot find it. Why? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
transparency in gtk
I need transparency in gtk under freerunner. So I compiled this code #include gtk/gtk.h gint main(gint argc, gchar **argv) { GtkWidget *window; gtk_init(argc, argv); window = gtk_window_new(GTK_WINDOW_TOPLEVEL); gtk_window_set_opacity(GTK_WINDOW(window), 0.1); gtk_widget_show_all(window); gtk_main(); } under my desktop and it shows transparent window. Then I compiled it for shr-u with crosscompiler from tmp/cross folder of shr-u sources. And on freerunner it shows not transparent window. So Is it possible to create transparent gtk apps in shr or other distribs for freerunner? And how if it possible? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: sim card detection
Kai-Martin пишет: My freerunner seems to have an issue with my sim card after boot. More often than not the phone seems to be ignorant to the sim card. Consequently, it doesn't attach to the GSM net, SMS messages on the card are not readable and it can't receive calls. But sometimes, the card is detected fine about three minutes after boot. If so, it the sim card stays known to the system after wake-up from suspend. I looked very closely on the way I attach the card into is socket. But this seems ok with no margin of error. I also made sure, the pins are clean and shiny. So electrical contact should not be flaky. Is the freerunner particularly fussy on the type of sim card? I read about problems with 3G cards. But mine is a pretty old O2 card -- bought in 2005. There is a suspicion, though. If I remember correctly, all the successful boots were done with a cable attached -- either USB from my desktop, or the connection to the charger. Could this be a hint? Maybe the system power is raised above some critical value to make the communication work? Is this a known issue? BTW, if there is no sim card detected, the application Settings-Phone hangs indefinitely on start-up. I'd consider this a bug where would I report on it? ---)kaimartin(--- I have pretty same issue. And with switching to shr-u from shr-t issue becomes stronger. But hackable:1 installed on sd turns on GSM very quickly. So, to get GSM working under shr I do /etc/init.d/frameworkd restart and if it doesn't help I try boot hackable - wait GSM - boot shr often it helps. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Problem with Messages Dialer and Contacts app
After this morning update Messages and Contacts shows white screen. Dialer shows white screen and bottom half of Contactlist string in left upper corner. Before checking phone apps I tried to delete /etc/freesmartphone/opim/pim.db to empty contacts and resync. Later I've restored pim.db. It doesn't help. Why is it so? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
How to manually delete sms from sim using dbus2 or something else?
Please tell me How to manually delete sms from sim using dbus2 or something else. my sim is full of messages ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: pisi cannot fetch contacts from sim in shr. please help
Robin Paulson пишет: On 13 March 2010 18:24, Chuck Norris norris.ch...@mail.ru wrote: ok. that does the trick. Now pisi have another problem: snip raise UnknownMethodException('%s is not a valid method of interface %s' % (method_name, dbus_interface)) UnknownMethodException: org.freedesktop.DBus.Error.UnknownMethod: Unknown method: GetUsedBackends is not a valid method of interface org.freesmartphone.PIM.Contact this problem with opimd I suppose. It converts contacts from sim to local vcf succesfully. So is it possible to tell opimd use vcf? i got this error, and mistakenly hit yes when it asked to continue processing. my contacts are all visible now, so i guess it worked ok.at your risk, though ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community I used console app pisi - it doesn't asks, just breaks. But through gui it synced my contacts successfully. thanx. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
cannot run phonelog.
$ phonelog Phonelog Initialized global vars Initializing gtk interface Showing main window Upright Started caching contacts Done caching contacts Started populating list Started getting missed Traceback (most recent call last): File /usr/bin/phonelog, line 775, in module populateListByPageNum(incoming, outgoing, missed, general, startup_page) File /usr/bin/phonelog, line 672, in populateListByPageNum missed.populateList() File /usr/bin/phonelog, line 192, in populateList calls = self.__getCalls() File /usr/bin/phonelog, line 171, in __getCalls calls = phone_data.getCalls(type) File /usr/bin/phonelog, line 584, in getCalls calls = query.GetMultipleResults(query.GetResultCount()) File /usr/lib/python2.6/site-packages/dbus/proxies.py, line 68, in __call__ return self._proxy_method(*args, **keywords) File /usr/lib/python2.6/site-packages/dbus/proxies.py, line 140, in __call__ **keywords) File /usr/lib/python2.6/site-packages/dbus/connection.py, line 622, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.DBus.Python.TypeError: Traceback (most recent call last): File /usr/lib/python2.6/site-packages/dbus/service.py, line 745, in _message_cb _method_reply_return(connection, message, method_name, signature, *retval) File /usr/lib/python2.6/site-packages/dbus/service.py, line 252, in _method_reply_return reply.append(signature=signature, *retval) TypeError: an integer is required ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
cannot run russian terminal keyboard
I've installed $ opkg list-installed | grep russian illume-keyboard-russian-terminal - 1:0.0+gitr1+7bcdd55dc0cf6f3b50fd0226345592f538301b8a-r2.4 but it not available in keyboard chooser in upper right corner of keyboard. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
pisi cannot fetch contacts from sim in shr. please help
pisi says: r...@neo ~/.pisi $ pisi -s -m5 shrsim vcf1 ERROR:dbus.connection:Unable to set arguments ('contacts',) according to signature u'sii': type 'exceptions.TypeError': More items found in D-Bus signature than in Python arguments Traceback (most recent call last): File /bin/pisi, line 156, in module pisicli.startCLI() File /opt/pisi/pisicli.py, line 232, in startCLI source[0].load() File /opt/pisi/modules/contacts_dbussim.py, line 98, in load dbusContacts = sim.RetrievePhonebook(DBUS_CONTACTS) File /usr/lib/python2.6/site-packages/dbus/proxies.py, line 68, in __call__ return self._proxy_method(*args, **keywords) File /usr/lib/python2.6/site-packages/dbus/proxies.py, line 140, in __call__ **keywords) File /usr/lib/python2.6/site-packages/dbus/connection.py, line 612, in call_blocking message.append(signature=signature, *args) TypeError: More items found in D-Bus signature than in Python arguments with config: r...@neo ~ $ cat ~/.pisi/conf [shrsim] description=SHR SIM Card Contacts module=contacts_dbussim ## ## 2.8) ## Configuration for OPIMD ## - optional parameter indicating whether to prefix each phone number (home, work, cell) automatically with 'tel:' (default is TRUE) ## ## - field support is work in progress for OPIMD, if you have a version of opimd supporting types already, put true here. Ones, this will ## have been widely deployed, the option will default; now default is FALSE! ## [opimd] description=OPIMD Contacts module=contacts_opimd field_support=FALSE #field_support=TRUE [vcf1] description=Local VCF file module=contacts_vcf vcfpath=/home/root/contacts.vcf default_phonetype=mobile with last shr-unstable: r...@neo ~ $ cat /etc/shr-version Tag Name: shr/testing2009-1rc1 VERSION: 7d09251222459df125e9d327aed57fc2daf7b439 Branch: shr/unstable Build Host: opmbuild Time Stamp: Sat, 06 Mar 2010 13:51:17 +0100 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: pisi cannot fetch contacts from sim in shr. please help
ra...@online.de пишет: Chuck Norris schrieb: pisi says: r...@neo ~/.pisi $ pisi -s -m5 shrsim vcf1 ERROR:dbus.connection:Unable to set arguments ('contacts',) according to signature u'sii': type 'exceptions.TypeError': More items found in D-Bus signature than in Python arguments Traceback (most recent call last): File /bin/pisi, line 156, in module pisicli.startCLI() File /opt/pisi/pisicli.py, line 232, in startCLI source[0].load() File /opt/pisi/modules/contacts_dbussim.py, line 98, in load dbusContacts = sim.RetrievePhonebook(DBUS_CONTACTS) File /usr/lib/python2.6/site-packages/dbus/proxies.py, line 68, in __call__ return self._proxy_method(*args, **keywords) File /usr/lib/python2.6/site-packages/dbus/proxies.py, line 140, in __call__ **keywords) File /usr/lib/python2.6/site-packages/dbus/connection.py, line 612, in call_blocking message.append(signature=signature, *args) TypeError: More items found in D-Bus signature than in Python arguments with config: r...@neo ~ $ cat ~/.pisi/conf [shrsim] description=SHR SIM Card Contacts module=contacts_dbussim ## ## 2.8) ## Configuration for OPIMD ## - optional parameter indicating whether to prefix each phone number (home, work, cell) automatically with 'tel:' (default is TRUE) ## ## - field support is work in progress for OPIMD, if you have a version of opimd supporting types already, put true here. Ones, this will ## have been widely deployed, the option will default; now default is FALSE! ## [opimd] description=OPIMD Contacts module=contacts_opimd field_support=FALSE #field_support=TRUE [vcf1] description=Local VCF file module=contacts_vcf vcfpath=/home/root/contacts.vcf default_phonetype=mobile with last shr-unstable:Traceback (most recent call last):] Loading from sourceses File /bin/pisi, line 156, in module pisicli.startCLI() File /opt/pisi/pisicli.py, line 236, in startCLI source[1].load() File /opt/pisi/modules/contacts_opimd.py, line 131, in load if contactObject.GetUsedBackends()[0]!= BACKEND_TYPE_SQLITE: File /usr/lib/python2.6/site-packages/dbus/proxies.py, line 68, in __call__ return self._proxy_method(*args, **keywords) File /usr/lib/python2.6/site-packages/dbus/proxies.py, line 140, in __call__ **keywords) File /usr/lib/python2.6/site-packages/dbus/connection.py, line 622, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.DBus.Error.UnknownMethod: Traceback (most recent call last): File /usr/lib/python2.6/site-packages/dbus/service.py, line 649, in _message_cb (candidate_method, parent_method) = _method_lookup(self, method_name, interface_name) File /usr/lib/python2.6/site-packages/dbus/service.py, line 244, in _method_lookup raise UnknownMethodException('%s is not a valid method of interface %s' % (method_name, dbus_interface)) UnknownMethodException: org.freedesktop.DBus.Error.UnknownMethod: Unknown method: GetUsedBackends is not a valid method of interface org.freesmartphone.PIM.Contact r...@neo ~ $ cat /etc/shr-version Tag Name: shr/testing2009-1rc1 VERSION: 7d09251222459df125e9d327aed57fc2daf7b439 Branch: shr/unstable Build Host: opmbuild Time Stamp: Sat, 06 Mar 2010 13:51:17 +0100 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community you have to fix /opt/pisi/modules/contacts_dbussim.py: in line 98 you have to change dbusContacts = sim.RetrievePhonebook(DBUS_CONTACTS) to dbusContacts = sim.RetrievePhonebook(DBUS_CONTACTS,1,self._max_simentries) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ok. that does the trick. Now pisi have another problem: $ pisi -s -m5 shrsim opimd Traceback (most recent call last):] Loading from sourceses File /bin/pisi, line 156, in module pisicli.startCLI() File /opt/pisi/pisicli.py, line 236, in startCLI source[1].load() File /opt/pisi/modules/contacts_opimd.py, line 131, in load if contactObject.GetUsedBackends()[0]!= BACKEND_TYPE_SQLITE: File /usr/lib/python2.6/site-packages/dbus/proxies.py, line 68, in __call__ return self._proxy_method(*args, **keywords) File /usr/lib/python2.6/site-packages/dbus/proxies.py, line 140, in __call__ **keywords) File /usr/lib/python2.6/site-packages/dbus/connection.py, line 622, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.DBus.Error.UnknownMethod: Traceback (most recent call last): File /usr/lib/python2.6/site-packages/dbus/service.py, line 649, in _message_cb (candidate_method, parent_method) = _method_lookup
Re: pisi cannot fetch contacts from sim in shr. please help
Andres Paglayan пишет: On Fri, 2010-03-12 at 15:36 +0600, Chuck Norris wrote: Is it true that you boot the Openmoko without batteries? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community yep :) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community