Re: USB Networking disabled
I now have it working. I changed the USB networking related features including cdc-ether as built-in, as opposed to modules, which was the original configuration. On Thu, Sep 10, 2009 at 4:31 AM, arne anka wrote: > - is cdc-ether built-in or a module? > - how do you make sure it is not recognized? syslog? > - das the log say anything at all about usb? > - what exactly are you seeing when pluggin in the fr on the host side? > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
USB Networking disabled
Hi List, I recently compile the latest andy-tracking branch of the kernel (GTA02_mystable-a3587e4ed77974ad), however the usb networking feature is no longer operational. Prior to installing the new kernel, my Linux system would recognize the Neo Freerunner as a CDC Ethernet device, now it no longer recognizes the device once it is attached. I used the gta02_moredrivers_defconfig in the build process. Does anyone know what might be causing this issue? Thanks in advance for you help. Regards, Neil Stewart ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Bad CRC
Paul, Thanks for the help. I reflashed the device with the Qi bootloader and it is now booting. Regards, Neil Stewart On Fri, Sep 4, 2009 at 9:18 AM, Paul Fertser wrote: > "Neil M. Stewart" writes: >> I am using a Neo Freerunner GTA02 v6 device and I am having an issue >> with booting a new kernel. The Qi bootloader is being used. I >> recently > > If you had used Qi you wouldn't see any messages on screen. The > message you pasted is from u-boot telling it can't load kernel because > it read only first 2M of it from NAND, not the full image. > > -- > Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! > mailto:fercer...@gmail.com > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Bad CRC
Hello List, I am using a Neo Freerunner GTA02 v6 device and I am having an issue with booting a new kernel. The Qi bootloader is being used. I recently compiled the andy-tracking branch of kernel (uImage-moredrivers-GTA02_mystable-a3587e4ed77974ad), however, when I boot receive the following error message: NAND read: device 0 offset 0x8, size 0x20 2097152 bytes read: OK ## Booting image at 3200 ... Image Name: OM GTA02 mystable_a3587e4ed77974 Created: 2009-09-03 20:56:30 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size:2342800 Bytes = 2.2 MB Load Address: 30008000 Entry Point: 30008000 Verifying Checksum ... Bad Data CRC The device does not go pass the openmoko splack image. Does anyone have any ideas about what might be causing this issue. Your assistance is appreciated. Regards, Neil Stewart ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
