Re: About the BRLCAD files I have created some time ago ...

2009-01-21 Thread Timo Juhani Lindfors 
Pander  writes:
> Which is the file for the GTA02 back cover? And in that open source
> application can I open ProE, IGES or STEP files. I know IGES can be
> converted and opened in BRLCAD. Anyone yet successful in this and have
> some insctruction how to do this?

Pro/E files can not be opened without proprietary software afaik.

http://sourceforge.net/forum/message.php?msg_id=5534033



___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

Re: About the BRLCAD files I have created some time ago ...

2009-01-21 Thread Pander 
Timo Juhani Lindfors wrote:
> Claus Christmann  writes:
>> I am the guy "hosting" the CAD files at the fore-mentioned address.
>> All I did in the beginning was to take the ProE files and transform them 
>> into 
>> IGES and STEP files.
> 
> Any chance to get a PDF rendering of these? I fetched BRLCAD source
> code and created a debian package but could not quite figure out how
> to actually use it to view the CAD files :-)

Which is the file for the GTA02 back cover? And in that open source
application can I open ProE, IGES or STEP files. I know IGES can be
converted and opened in BRLCAD. Anyone yet successful in this and have
some insctruction how to do this?

> 
> ___
> Openmoko community mailing list
> community@lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

Re: About the BRLCAD files I have created some time ago ...

2009-01-21 Thread Claus Christmann 
On Friday 16 January 2009 08:42:30 Claus Christmann wrote:
> Please see inline and below...
>
> On Friday 16 January 2009 04:54:41 Pander wrote:
> > Hi all,
> >
> > The download with the CAD file is a bit messy, I've a cleaned up
> > version. To who can I send this for review and subsequent hosting on the
> > downloads?
> >
> > Regards,
> >
> > Pander
> >
> > Lothar Behrens wrote:
> > > Hi,
> > >
> > > I wondered why there is no link to the BRLCAD files I have created and
> > > then located at the following
> > > page: http://controls.ae.gatech.edu/claus/web/openmoko.html
> > >
> > > I only found the page by searching the mailinglist about BRLCAD, but
> > > this is because I KNOW about
> > > the existence of these files.
> > >
> > > Wouldn't it be better to add a page with information more than only a
> > > list of files generated by the browser ?
> > >
> > > http://downloads.openmoko.org/CAD/
> > >
> > > Then there could added more stuff like editing the files to create more
> > > stuff. Should I, am I allowed to do so ?
> > >
> > > Thanks
> > >
> > > Lothar
> > >
> > > -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de
> > > 
> > > Lothar Behrens
> > > Heinrich-Scheufelen-Platz 2
> > > 73252 Lenningen
> > > ---
> > >-
>
> Hi,
>
> I am the guy "hosting" the CAD files at the fore-mentioned address.
> All I did in the beginning was to take the ProE files and transform them
> into IGES and STEP files.
>
> I asked on the email list how to proceed and was then contacted by Michael
> Shiloh . I then made the files publicly available on
> my site (at http://controls.ae.gatech.edu/claus/web/openmoko.html) and
> Michael moved the files from there to the
> http://downloads.openmoko.org/CAD/ site.
>
> I guess there is no need for me to be the "man in the middle", but I have
> the online space and can host the files there. If somebody has some more
> CAD files and wants to get them to me, just let me know in private. I could
> create a wiki page the points to my site, but I guess we should try to get
> Michael to transfer all the new files to http://downloads.openmoko.org/CAD/
> as well
>
> Comments?
>
> Thanks,
>
> Claus

Pander has send me the new files for BRLCAD (total of 131MB, .tar.bz2). I have 
put them on my CAD page:

https://controls.ae.gatech.edu/claus/web/openmoko.html

Please feel free to download the new files from there...

Claus

-- 
Claus Christmann
Graduate Research Assistant

Georgia Institute of Technology
270 Ferst Drive
Atlanta, GA 30332-0150, USA

http://uav.ae.gatech.edu

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

Re: About the BRLCAD files I have created some time ago ...

2009-01-16 Thread Timo Juhani Lindfors 
Claus Christmann  writes:
> I am the guy "hosting" the CAD files at the fore-mentioned address.
> All I did in the beginning was to take the ProE files and transform them into 
> IGES and STEP files.

Any chance to get a PDF rendering of these? I fetched BRLCAD source
code and created a debian package but could not quite figure out how
to actually use it to view the CAD files :-)

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

Re: About the BRLCAD files I have created some time ago ...

2009-01-16 Thread Claus Christmann 
Please see inline and below...

On Friday 16 January 2009 04:54:41 Pander wrote:
> Hi all,
>
> The download with the CAD file is a bit messy, I've a cleaned up
> version. To who can I send this for review and subsequent hosting on the
> downloads?
>
> Regards,
>
> Pander
>
> Lothar Behrens wrote:
> > Hi,
> >
> > I wondered why there is no link to the BRLCAD files I have created and
> > then located at the following
> > page: http://controls.ae.gatech.edu/claus/web/openmoko.html
> >
> > I only found the page by searching the mailinglist about BRLCAD, but
> > this is because I KNOW about
> > the existence of these files.
> >
> > Wouldn't it be better to add a page with information more than only a
> > list of files generated by the browser ?
> >
> > http://downloads.openmoko.org/CAD/
> >
> > Then there could added more stuff like editing the files to create more
> > stuff. Should I, am I allowed to do so ?
> >
> > Thanks
> >
> > Lothar
> >
> > -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de
> > 
> > Lothar Behrens
> > Heinrich-Scheufelen-Platz 2
> > 73252 Lenningen
> > 
>

Hi,

I am the guy "hosting" the CAD files at the fore-mentioned address.
All I did in the beginning was to take the ProE files and transform them into 
IGES and STEP files.

I asked on the email list how to proceed and was then contacted by Michael 
Shiloh . I then made the files publicly available on my 
site (at http://controls.ae.gatech.edu/claus/web/openmoko.html) and Michael 
moved the files from there to the http://downloads.openmoko.org/CAD/ site.

I guess there is no need for me to be the "man in the middle", but I have the 
online space and can host the files there. If somebody has some more CAD files 
and wants to get them to me, just let me know in private. I could create a 
wiki page the points to my site, but I guess we should try to get Michael to 
transfer all the new files to http://downloads.openmoko.org/CAD/ as well

Comments?

Thanks,

Claus

-- 
Claus Christmann
Graduate Research Assistant

Georgia Institute of Technology
270 Ferst Drive
Atlanta, GA 30332-0150, USA

http://uav.ae.gatech.edu

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

Re: About the BRLCAD files I have created some time ago ...

2009-01-16 Thread Pander 
Hi all,

The download with the CAD file is a bit messy, I've a cleaned up
version. To who can I send this for review and subsequent hosting on the
downloads?

Regards,

Pander

Lothar Behrens wrote:
> Hi,
> 
> I wondered why there is no link to the BRLCAD files I have created and
> then located at the following
> page: http://controls.ae.gatech.edu/claus/web/openmoko.html
> 
> I only found the page by searching the mailinglist about BRLCAD, but
> this is because I KNOW about
> the existence of these files.
> 
> Wouldn't it be better to add a page with information more than only a
> list of files generated by the browser ?
> 
> http://downloads.openmoko.org/CAD/
> 
> Then there could added more stuff like editing the files to create more
> stuff. Should I, am I allowed to do so ?
> 
> Thanks
> 
> Lothar
> 
> -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de
> 
> Lothar Behrens
> Heinrich-Scheufelen-Platz 2
> 73252 Lenningen
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> ___
> Openmoko community mailing list
> community@lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

About the BRLCAD files I have created some time ago ...

2009-01-16 Thread Lothar Behrens 

Hi,

I wondered why there is no link to the BRLCAD files I have created and  
then located at the following

page: http://controls.ae.gatech.edu/claus/web/openmoko.html

I only found the page by searching the mailinglist about BRLCAD, but  
this is because I KNOW about

the existence of these files.

Wouldn't it be better to add a page with information more than only a  
list of files generated by the browser ?


http://downloads.openmoko.org/CAD/

Then there could added more stuff like editing the files to create  
more stuff. Should I, am I allowed to do so ?


Thanks

Lothar

-- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de
Lothar Behrens
Heinrich-Scheufelen-Platz 2
73252 Lenningen








___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community