Re: GTA04A3 test progress
On Sat, 18 Jun 2011 03:25:43 +0200 Christoph Mair m...@chonyota.net wrote: Hi, finally here is a status update on the GTA04A3 board. That's what I've done until now to test it: - attach power, serial console works - boot from sd card (works) - revert I2C-fix from u-boot and kernel - works without: the hardware is ok, the power supply issues are gone. - test switches and LEDs (seems ok) - turn GPS on and off (works, didn't wait for a fix yet) - attach an external GPS antenna (was not recognized, maybe my antenna is broken) - boot debian and lxde (works) - test touch screen (works) - attach an USB cable (gives errors in dmesg, GTA04 is not recognized as USB device, usb host not tested yet) - add driver and firmware for WLAN (chip is recognized, driver seems to be buggy, does not execute commands) - enable bluetooth (without success yet) Enough for today, I will continue tomorrow. Good night, Christoph ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community So many good news, I hope you will sleep a bit now, 3:25 am is a good time to go to bed! Do you have the GSM chip enabled ? -- Thomas HOCEDEZ thomas.hoce...@free.fr ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: GTA04A3 test progress
Am 18.06.2011 um 09:40 schrieb Thomas HOCEDEZ: On Sat, 18 Jun 2011 03:25:43 +0200 Christoph Mair m...@chonyota.net wrote: Hi, finally here is a status update on the GTA04A3 board. That's what I've done until now to test it: - attach power, serial console works - boot from sd card (works) - revert I2C-fix from u-boot and kernel - works without: the hardware is ok, the power supply issues are gone. - test switches and LEDs (seems ok) - turn GPS on and off (works, didn't wait for a fix yet) - attach an external GPS antenna (was not recognized, maybe my antenna is broken) - boot debian and lxde (works) - test touch screen (works) - attach an USB cable (gives errors in dmesg, GTA04 is not recognized as USB device, usb host not tested yet) - add driver and firmware for WLAN (chip is recognized, driver seems to be buggy, does not execute commands) - enable bluetooth (without success yet) Enough for today, I will continue tomorrow. Good night, Christoph ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community So many good news, I hope you will sleep a bit now, 3:25 am is a good time to go to bed! Do you have the GSM chip enabled ? Well, the UMTS modem module is not yet soldered on those two boards we have so far. The reason is that it is a littele easier to test the internal USB port on which the module is hooked up if the module is not connected. And we wanted to reduce the amount of money we would scrap, if the board did fail. But so far it looks good and we finally can add one of those (expensive) UMTS modules. BR, Nikolaus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
GTA04A3 test progress
Hi, finally here is a status update on the GTA04A3 board. That's what I've done until now to test it: - attach power, serial console works - boot from sd card (works) - revert I2C-fix from u-boot and kernel - works without: the hardware is ok, the power supply issues are gone. - test switches and LEDs (seems ok) - turn GPS on and off (works, didn't wait for a fix yet) - attach an external GPS antenna (was not recognized, maybe my antenna is broken) - boot debian and lxde (works) - test touch screen (works) - attach an USB cable (gives errors in dmesg, GTA04 is not recognized as USB device, usb host not tested yet) - add driver and firmware for WLAN (chip is recognized, driver seems to be buggy, does not execute commands) - enable bluetooth (without success yet) Enough for today, I will continue tomorrow. Good night, Christoph ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
