RE: Cygwin Connection Tool for Windows -- new release
Hi Mario, It seems working now. But clicking www.thelinuxbeat.com brought me to http://thelinuxbeat.nu-sec.de/; a German website. Only Service kostenlos has a link there, nothing else. Thanks Stephen Liu At 06:17 AM 11/14/2002 +0100, you wrote: nope, it worked for me ;) -Original Message- From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Sent: Thursday, November 14, 2002 3:31 AM To: Mario Ohnewald; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: Cygwin Connection Tool for Windows -- new release Hi Mario, At 07:36 PM 11/13/2002 +0100, Mario Ohnewald wrote: Hi! You can find the new release at www.thelinuxbeat.com -- projects -- cygwin tool Is the website down. I could not connect it. Thanks Stephen Liu The Setup error is fixed and the binary setup file shrank to 2,4MB (from ~8MB). Check it out!!
RE: Cygwin Connection Tool for Windows -- new release
--- Stephen Liu [EMAIL PROTECTED] a écrit : Hi Mario, It seems working now. But clicking www.thelinuxbeat.com brought me to http://thelinuxbeat.nu-sec.de/; a German website. Only Service kostenlos has a link there, nothing else. This is the right site, reread Mario's instructions : You can find the new release at www.thelinuxbeat.com -- projects -- cygwin tool ___ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com
RE: Cygwin Connection Tool for Windows -- new release
Hi, Hi Mario, It seems working now. But clicking www.thelinuxbeat.com brought me to http://thelinuxbeat.nu-sec.de/; a German website. Only Service kostenlos has a link there, nothing else. Hehe, yes, this was the correct page, on the left there should appear a menu, where you can select the Project link (english). I might have to think about a redesign again ;P Thanks Stephen Liu Mario -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!
Virus Warning (RE: Cygwin Connection Tool for Windows -- new release)
Hi Mario, The file got infected with worm W32.Bugbearmm and it spread to the whole WinXP machine immediately. Fortunately I was able to fix it removing the worm. Another strange thing is your mentioned menu on the left of the website disappeared on IE but can be seen on Mozilla. Stephen Liu At 12:55 PM 11/14/2002 +0100, Mario Ohnewald wrote: Hi, Hi Mario, It seems working now. But clicking www.thelinuxbeat.com brought me to http://thelinuxbeat.nu-sec.de/; a German website. Only Service kostenlos has a link there, nothing else. Hehe, yes, this was the correct page, on the left there should appear a menu, where you can select the Project link (english). I might have to think about a redesign again ;P Thanks Stephen Liu Mario -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!
RE: Virus Warning (RE: Cygwin Connection Tool for Windows -- new release)
hi! I took it from the net imeediately!!! I have just checked the file and it seems to be ok, but i will check it another time with different Programms, too. Thank you! MArio From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Sent: Thursday, November 14, 2002 5:52 PM To: [EMAIL PROTECTED] Subject: Virus Warning (RE: Cygwin Connection Tool for Windows -- new release) Hi Mario, The file got infected with worm W32.Bugbear@mm and it spread to the whole WinXP machine immediately. Fortunately I was able to fix it removing the worm. Another strange thing is your mentioned menu on the left of the website disappeared on IE but can be seen on Mozilla. Stephen Liu At 12:55 PM 11/14/2002 +0100, Mario Ohnewald wrote: Hi, Hi Mario, It seems working now. But clicking www.thelinuxbeat.com brought me to http://thelinuxbeat.nu-sec.de/; a German website. Only Service kostenlos has a link there, nothing else. Hehe, yes, this was the correct page, on the left there should appear a menu, where you can select the Project link (english). I might have to think about a redesign again ;P Thanks Stephen Liu Mario -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!
RE: Virus Warning (RE: Cygwin Connection Tool for Windows -- new release)
Hi! I have checked my System and the setup file with AntiVir/XP and Norton Antivirus 2002 (both uptodate). I could not find any viruses. Please check your system, it might have infected the setup file. Please keep me up to date ;) Regards, Mario p.s. Anyone else with same problem? By the way, how to i get the for reply messages, i cant find it anymore! :/ -Original Message- From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Sent: Thursday, November 14, 2002 5:52 PM To: [EMAIL PROTECTED] Subject: Virus Warning (RE: Cygwin Connection Tool for Windows -- new release) Hi Mario, The file got infected with worm W32.Bugbear@mm and it spread to the whole WinXP machine immediately. Fortunately I was able to fix it removing the worm. Another strange thing is your mentioned menu on the left of the website disappeared on IE but can be seen on Mozilla. Stephen Liu At 12:55 PM 11/14/2002 +0100, Mario Ohnewald wrote: Hi, Hi Mario, It seems working now. But clicking www.thelinuxbeat.com brought me to http://thelinuxbeat.nu-sec.de/; a German website. Only Service kostenlos has a link there, nothing else. Hehe, yes, this was the correct page, on the left there should appear a menu, where you can select the Project link (english). I might have to think about a redesign again ;P Thanks Stephen Liu Mario -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!
RE: NO VIRUS (Virus Warning (RE: Cygwin Connection Tool for Windows -- new release))
Hi Darko, From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Palic, Darko Sent: Thursday, November 14, 2002 10:51 PM To: [EMAIL PROTECTED] Subject: RE: Virus Warning (RE: Cygwin Connection Tool for Windows -- new release) Hi Mario! do you spread viruses, ba tell your admin to fix it immediately :-) muhahaah ;P Seems to be a typical windows/outlook user :-) I admit, i am s sorry, but i would blame it on Battlefield! hehe Under Outlook you could find it under options/settings/email options Muchas Gracias!! p.s. I gave this setup.exe file to 4different users, with different virus scanners, all uptodate! Noone found a Virus. If you are not sure weather to use it or not, use the Sourcecode and compile it yourself! cu Darko -Original Message- From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Mario Ohnewald Sent: Thursday, November 14, 2002 6:44 PM To: [EMAIL PROTECTED] Subject: RE: Virus Warning (RE: Cygwin Connection Tool for Windows -- new release) Hi! I have checked my System and the setup file with AntiVir/XP and Norton Antivirus 2002 (both uptodate). I could not find any viruses. Please check your system, it might have infected the setup file. Please keep me up to date ;) Regards, Mario p.s. Anyone else with same problem? By the way, how to i get the for reply messages, i cant find it anymore! :/ -Original Message- From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Sent: Thursday, November 14, 2002 5:52 PM To: [EMAIL PROTECTED] Subject: Virus Warning (RE: Cygwin Connection Tool for Windows -- new release) Hi Mario, The file got infected with worm W32.Bugbear@mm and it spread to the whole WinXP machine immediately. Fortunately I was able to fix it removing the worm. Another strange thing is your mentioned menu on the left of the website disappeared on IE but can be seen on Mozilla. Stephen Liu At 12:55 PM 11/14/2002 +0100, Mario Ohnewald wrote: Hi, Hi Mario, It seems working now. But clicking www.thelinuxbeat.com brought me to http://thelinuxbeat.nu-sec.de/; a German website. Only Service kostenlos has a link there, nothing else. Hehe, yes, this was the correct page, on the left there should appear a menu, where you can select the Project link (english). I might have to think about a redesign again ;P Thanks Stephen Liu Mario
RE: Cygwin Connection Tool for Windows
Oh, Cygwin running X-Server on Vmware. What a ...= don't know how to say that :) UPS, havent tested it on XP Yet ;( I will try to fix this as soon as i have installed XP on VMWare ;P Did you get it running on Win2k? ___ Do You Yahoo!? -- Une adresse yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com
RE: Cygwin Connection Tool for Windows
On Wed, 13 Nov 2002, Sylvain Petreolle wrote: Oh, Cygwin running X-Server on Vmware. What a ...= don't know how to say that :) UPS, havent tested it on XP Yet ;( I will try to fix this as soon as i have installed XP on VMWare ;P Did you get it running on Win2k? Guess what I'm doing all the time. I have a cross-compiler running on linux and test all cygwin/Cygwin XFree changes in a VmWare. This was the only way to fix some bugs in the cygwin network handling on _very_ old win95. This was _much_ better than breaking my workstation. bye ago
Re: Cygwin Connection Tool for Windows
--- Rasjid Wilcox [EMAIL PROTECTED] a écrit : On Wed, 13 Nov 2002 9:16 pm, Sylvain Petreolle wrote: Oh, Cygwin running X-Server on Vmware. What a ...= don't know how to say that :) Excuse if I made you misunderstand me. Is because of my bad english. But I was really surprised to see someone using VmWare for that. (I'm currently trying to run Cygwin under Wine ;)) And what is wrong with that?? How else do you test Cygwin when you run Linux at home?? (Or, Why dual boot when you can VMWare? ;-) Rasjid. ___ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com
RE: Cygwin Connection Tool for Windows -- new release
Hi Mario, At 07:36 PM 11/13/2002 +0100, Mario Ohnewald wrote: Hi! You can find the new release at www.thelinuxbeat.com -- projects -- cygwin tool Is the website down. I could not connect it. Thanks Stephen Liu The Setup error is fixed and the binary setup file shrank to 2,4MB (from ~8MB). Check it out!!
RE: Cygwin Connection Tool for Windows -- new release
nope, it worked for me ;) -Original Message- From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Sent: Thursday, November 14, 2002 3:31 AM To: Mario Ohnewald; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: Cygwin Connection Tool for Windows -- new release Hi Mario, At 07:36 PM 11/13/2002 +0100, Mario Ohnewald wrote: Hi! You can find the new release at www.thelinuxbeat.com -- projects -- cygwin tool Is the website down. I could not connect it. Thanks Stephen Liu The Setup error is fixed and the binary setup file shrank to 2,4MB (from ~8MB). Check it out!!
RE: Cygwin Connection Tool for Windows
Hi Mario, I encountered problem in installing the connection tool OS = WinXP Start - Run - setup.exeFollowing warning pop-up at time of installation Cygwin Connection Tool Setup C:\Windows\Setup.LTS Invalid line in Setup information file Section: Setup 1 File . I could not proceed further. Kindly advise. Thanks in advance. Stephen Liu At 06:52 PM 2002/11/9 +0100, you wrote: Hi Stephen, you need to set: - XWin.exe file location - Resolution - IP you want to connect to optional: - Network (e.g. 192.169.10.0 -- must end with an 0 !) Plese let me know if it worked for you! Regards, Mario From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Hi Mario, Re your tool for Windows. I have it downloaded. Is it just unzip it and install it on Windows then it will work. Any configuration needed? Thanks Stephen At 11:38 PM 2002/11/8 +0100, you wrote: Hello! I wrote a little tool and called it Cygwin Connection Tool. You can find infos about it on http://thelinuxbeat.nu-sec.de/cygwin_tool/ I its under the GPL license, and written in Visual Basic. My Aim is to write it in C++ some time. I was wondering if i do/did something illegal by using its Icon, Name, whatever. I do not want something wich the Cygewin Team/Developer do not want. I wrote it as a little helpful tool, and why should i not share it with others? It´s my very first Project, so please forgive and tell me if i did something wrong. Cheers, Mario
RE: Cygwin Connection Tool for Windows
Hi Liu, -Original Message- From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Hi Mario, I encountered problem in installing the connection tool OS = WinXP Start - Run - setup.exeFollowing warning pop-up at time of installation Cygwin Connection Tool Setup C:\Windows\Setup.LTS Invalid line in Setup information file Section: Setup 1 File . UPS, havent tested it on XP Yet ;( I will try to fix this as soon as i have installed XP on VMWare ;P Did you get it running on Win2k? Changelog: --- 08.11.2002 --- - BUg discovert, it wont load XWin.exe. -- Copy cygwin1.dll and cygz.dll into the system32 directory. This Bug will be fixed soon. I could not proceed further. Kindly advise. Thanks in advance. Stephen Liu At 06:52 PM 2002/11/9 +0100, you wrote: Hi Stephen, you need to set: - XWin.exe file location - Resolution - IP you want to connect to optional: - Network (e.g. 192.169.10.0 -- must end with an 0 !) Plese let me know if it worked for you! Regards, Mario From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Hi Mario, Re your tool for Windows. I have it downloaded. Is it just unzip it and install it on Windows then it will work. Any configuration needed? Thanks Stephen At 11:38 PM 2002/11/8 +0100, you wrote: Hello! I wrote a little tool and called it Cygwin Connection Tool. You can find infos about it on http://thelinuxbeat.nu-sec.de/cygwin_tool/ I its under the GPL license, and written in Visual Basic. My Aim is to write it in C++ some time. I was wondering if i do/did something illegal by using its Icon, Name, whatever. I do not want something wich the Cygewin Team/Developer do not want. I wrote it as a little helpful tool, and why should i not share it with others? It´s my very first Project, so please forgive and tell me if i did something wrong. Cheers, Mario
RE: Cygwin Connection Tool for Windows
Hi Mario, At 01:58 PM 11/12/2002 +0100, you wrote: Hi Liu, -Original Message- From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Hi Mario, I encountered problem in installing the connection tool OS = WinXP Start - Run - setup.exeFollowing warning pop-up at time of installation Cygwin Connection Tool Setup C:\Windows\Setup.LTS Invalid line in Setup information file Section: Setup 1 File . UPS, havent tested it on XP Yet ;( I will try to fix this as soon as i have installed XP on VMWare ;P Did you get it running on Win2k? Sorry. At this moment I only have a WinXP box available for test. I am prepared to build a Win2K box but it will take about 1-2 days because I have to empty all existing stuffs on a PII-350 box for its installation. Stephen Changelog: --- 08.11.2002 --- - BUg discovert, it wont load XWin.exe. -- Copy cygwin1.dll and cygz.dll into the system32 directory. This Bug will be fixed soon. I could not proceed further. Kindly advise. Thanks in advance. Stephen Liu At 06:52 PM 2002/11/9 +0100, you wrote: Hi Stephen, you need to set: - XWin.exe file location - Resolution - IP you want to connect to optional: - Network (e.g. 192.169.10.0 -- must end with an 0 !) Plese let me know if it worked for you! Regards, Mario From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Hi Mario, Re your tool for Windows. I have it downloaded. Is it just unzip it and install it on Windows then it will work. Any configuration needed? Thanks Stephen At 11:38 PM 2002/11/8 +0100, you wrote: Hello! I wrote a little tool and called it Cygwin Connection Tool. You can find infos about it on http://thelinuxbeat.nu-sec.de/cygwin_tool/ I its under the GPL license, and written in Visual Basic. My Aim is to write it in C++ some time. I was wondering if i do/did something illegal by using its Icon, Name, whatever. I do not want something wich the Cygewin Team/Developer do not want. I wrote it as a little helpful tool, and why should i not share it with others? It´s my very first Project, so please forgive and tell me if i did something wrong. Cheers, Mario
RE: Cygwin Connection Tool for Windows
It dies with the same error in Win2K. Michael D. Harnois 2L, UST School of Law Minneapolis, Minnesota The first thing you should do when you get up is read the obituaries. You never know when you'll see a name that will just make your day. --Ed Salisbury -Original Message- From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Sent: Tuesday, November 12, 2002 10:18 To: [EMAIL PROTECTED] Subject: RE: Cygwin Connection Tool for Windows Hi Mario, At 01:58 PM 11/12/2002 +0100, you wrote: Hi Liu, -Original Message- From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Hi Mario, I encountered problem in installing the connection tool OS = WinXP Start - Run - setup.exeFollowing warning pop-up at time of installation Cygwin Connection Tool Setup C:\Windows\Setup.LTS Invalid line in Setup information file Section: Setup 1 File . UPS, havent tested it on XP Yet ;( I will try to fix this as soon as i have installed XP on VMWare ;P Did you get it running on Win2k? Sorry. At this moment I only have a WinXP box available for test. I am prepared to build a Win2K box but it will take about 1-2 days because I have to empty all existing stuffs on a PII-350 box for its installation. Stephen Changelog: --- 08.11.2002 --- - BUg discovert, it wont load XWin.exe. -- Copy cygwin1.dll and cygz.dll into the system32 directory. This Bug will be fixed soon. I could not proceed further. Kindly advise. Thanks in advance. Stephen Liu At 06:52 PM 2002/11/9 +0100, you wrote: Hi Stephen, you need to set: - XWin.exe file location - Resolution - IP you want to connect to optional: - Network (e.g. 192.169.10.0 -- must end with an 0 !) Plese let me know if it worked for you! Regards, Mario From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Hi Mario, Re your tool for Windows. I have it downloaded. Is it just unzip it and install it on Windows then it will work. Any configuration needed? Thanks Stephen At 11:38 PM 2002/11/8 +0100, you wrote: Hello! I wrote a little tool and called it Cygwin Connection Tool. You can find infos about it on http://thelinuxbeat.nu-sec.de/cygwin_tool/ I its under the GPL license, and written in Visual Basic. My Aim is to write it in C++ some time. I was wondering if i do/did something illegal by using its Icon, Name, whatever. I do not want something wich the Cygewin Team/Developer do not want. I wrote it as a little helpful tool, and why should i not share it with others? It´s my very first Project, so please forgive and tell me if i did something wrong. Cheers, Mario
Re: Cygwin Connection Tool for Windows
Hi Mario, Re your tool for Windows. I have it downloaded. Is it just unzip it and install it on Windows then it will work. Any configuration needed? Thanks Stephen At 11:38 PM 2002/11/8 +0100, you wrote: Hello! I wrote a little tool and called it Cygwin Connection Tool. You can find infos about it on http://thelinuxbeat.nu-sec.de/cygwin_tool/ I its under the GPL license, and written in Visual Basic. My Aim is to write it in C++ some time. I was wondering if i do/did something illegal by using its Icon, Name, whatever. I do not want something wich the Cygewin Team/Developer do not want. I wrote it as a little helpful tool, and why should i not share it with others? It´s my very first Project, so please forgive and tell me if i did something wrong. Cheers, Mario
RE: Cygwin Connection Tool for Windows
Hi Stephen, you need to set: - XWin.exe file location - Resolution - IP you want to connect to optional: - Network (e.g. 192.169.10.0 -- must end with an 0 !) Plese let me know if it worked for you! Regards, Mario From: [EMAIL PROTECTED] [mailto:cygwin-xfree-owner;cygwin.com]On Behalf Of Stephen Liu Hi Mario, Re your tool for Windows. I have it downloaded. Is it just unzip it and install it on Windows then it will work. Any configuration needed? Thanks Stephen At 11:38 PM 2002/11/8 +0100, you wrote: Hello! I wrote a little tool and called it Cygwin Connection Tool. You can find infos about it on http://thelinuxbeat.nu-sec.de/cygwin_tool/ I its under the GPL license, and written in Visual Basic. My Aim is to write it in C++ some time. I was wondering if i do/did something illegal by using its Icon, Name, whatever. I do not want something wich the Cygewin Team/Developer do not want. I wrote it as a little helpful tool, and why should i not share it with others? It´s my very first Project, so please forgive and tell me if i did something wrong. Cheers, Mario
