Machines and Wanteds
" x 36" Gidding Lewis Double End Facing and Centering Machine, Model Endomatic MC,Hydraulic Vises, 10HP Face Milling, 3 HP Center Drill, Well Tooled ! 1977 430-188 CINCINNATI SIMPLEX PRODUCTION MILL, Model 430-188, 18"x 120"Table, X=96", Auto Quill Retract, 30 HP, 1980, $ 29,500 Checkit out !! Our Ebay Auction !! WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. ANY MAKE CNC CENTER DRIVE LATHE with 12" Bore CINCINNATI1210, 1208 or 1212 CNC Turning Center with Acramatic 850 CNC Control CINCINNATI 2-Axis Head for a SideWinder Vertical Machining Center CNC VERTICAL BORING MILL with LiveMilling and Y-Axis Travel (Gantry Travel or Table Travel in Y-Axis). 3-10 Meter Table or Larger,Froriep,Dorries, Berthiez, Etc. 84" CNC Rotary Table (or one we can make CNC), Square or round, Must have 20,000lb table load capacity. Larger is Fine. CAT-50 VERTICAL MACHINING CENTER, 25" x 60" Table or Larger, 30" Z-Travel, Thru Spindle Coolant, 1999 or newer WALDRICH SURFACE GRINDER 70" WIDE x 120" Long CINCINNATI or SNK 5-Axis Vertical C-Frame Machine. Will consider new or old. Running or not. EUROTECH TurningCenters Models 420SLLY or 710SLLY or any older Eurotech machines with Y-Axis 1994 - 2000 Okuma Cadet, LU, LB,8" or 10" Chuck, Must have Tail Stock. HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 TO BE REMOVED : If you no longer want to receive updates on machines we have for saleyou can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.
Machines and Tooling
#30 FOSDICK JIG BORE, 36" x18" Table,Pathfinder 2-AxisDRO, 3HP, 60-1150 RPM, 27" Vertical Capacity, #4 MT, Nice !! $ 1,950. ELOX TAP BURNER,Model 302,18" x 26" Table, Automatic Feed, 25" Vertical Capacity, 110 Volt, $ 1,950 12" x 36"CINCINNATI LATHE, Geared Head, 3-Jaw, 4-Jaw, Collet, Aloris Tool Post, Threading, $ 2,950 4' x 12" OoyaRadial Drill, Model RE1225H, 5HP, #5 MT, 1985 RPM, Box Table, 1970 8" x 36" Gidding Lewis Double End Facing and Centering Machine, Model Endomatic MC,Hydraulic Vises, 10HP Face Milling, 3 HP Center Drill, Well Tooled ! 1977 430-188 CINCINNATI SIMPLEX PRODUCTION MILL, Model 430-188, 18"x 120"Table, X=96", Auto Quill Retract, 30 HP, 1980, $ 29,500 WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. CINCINNATI MAXIM 630 CNC Horizontal Machining Center CNC VERTICAL BORING MILL with LiveMilling and Y-Axis Travel. 3-10 Meter Table or Larger,Froriep,Dorries, Berthiez, Etc. 84" CNC Rotary Table (or one we can make CNC), Square or round, Must have 20,000lb table load capacity. Larger is Fine. CAT-50 VERTICAL MACHINING CENTER, 25" x 60" Table or Larger, 30" Z-Travel, Thru Spindle Coolant, 1999 or newer WALDRICH SURFACE GRINDER 70" WIDE x 120" Long CINCINNATI or SNK 5-Axis Vertical C-Frame Machine. Will consider new or old. Running or not. OKUMA LB-400 or L-470 CNC Turning Center EUROTECH TurningCenters Models 420SLLY or 710SLLY or any older Eurotech machines with Y-Axis 1994 - 2000 Okuma Cadet, LU, LB,8" or 10" Chuck, Must have Tail Stock. WEBB Tank Press to Hold Tank Heads and Body together while welding. HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 TO BE REMOVED : If you no longer want to receive updates on machines we have for saleyou can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.
CNC Machines
JUST PURCHASED!! HORIZONTAL MACHINING CENTERS MAZAK FH880 Horizontal Machining Center,Fusion 640 CNCControl, (2) 800mm Pallets with Full Contouring 4th Axis, X=51", Y=43", Z=39",7000 RPM, 120 Station Tool Changer, 2000 CINCINNATI MILACRON MAGNUM 800 Horizontal Machining Center,Acramatic 950 CNC Control, (2) 800mm Pallets with 1 Degree Indexing, X=51.2", Y=43.3", Z=44.3", 50HP, 6500 RPM, 90 Station Tool Changer, 1996 CINCINNATI T-30 CNC Horizontal Machining Center, Acramatic 900CNC Control,X=40", Y=40", Z= 42", 4,000 RPM,60 Station Tool Changer, Thru SpindleCoolant,30HP, 6Pallet work Changer, (60 31.5" Square Pallets with 1 Degree Indexing, $ 39,500. CINCINNATI MILACRON MAGNUM 1000 Horizontal Machining Center,Acramatic 950 CNC Control, (4) 1000mm Pallets with 1 Degree Indexing, X=61", Y=51.2", Z=47.2", 50HP, 6500 RPM, 90 Station Tool Changer, 1998 TSUDAKOMA 25" CNC ROTARY TABLE with Stand Alone CNC Control,Model RNCV-600R,Tsudakoma TPC3 Control with Pendent,25" Diameter Table, Brand New Never Used !! Still in Original Factory Box. VERTICAL MACHINING CENTERS OKUMA MC-60VAECNC Vertical Machining Center,Okuma OSP-7000M CNC, X=59.06", Y=24.8", Z=24.02", 60.24" x 24.8" Table, 5000 RPM, CAT-50, 22HP,20 ATC,New 1997, Big Heavy Duty Machine. CINCINNATi ARROW 500CNC Vertical Machining Center,Acramatic 2100 PC Based CNC Control, X=20", Y=20", Z= 20", 27.5" x 20" Table, 100-8000 RPM, CAT-40, 15HP,21 ATC,New 1999, From Tool Room ! Excellent Condition ! $ 34,500. CNC TURNINGCENTERS OKUMAMacTurn 50 Multiple Axis CNC Turning Center with Live Tooling and Y-Axis,OSP U100 CNC, IGF, 28.34" Swing, 28.34" Max Turn Diameter, 48.78" Machining Length,69" Between Centers, 9,84" Y-Axis Travel, C-Axis, B-Axis, 12 Position Lower Turret, Cat-50 Upper Milling/Turning Head,15" Chuck, 40HP, New 2000 OKUMACADET L1420/1250 BIG BORE, OSP 700L CNC, IGF, 28" Swing, 18.9" Max Turn Diameter, 48.78" Machining Length, 12 Station Turret, 12" Chuck, 3.62" Bar Capacity, 1998. OKUMALB-300 Big Bore with 3.1" Bar Capacity, OSP U100L CNC, 20.8" Swing, 14.56" Max Turn Diameter, 20.47" Centers, 3800 RPM, 30HP, 12 Position Turret. Collet Chuck with 1 Degree Indexing,New 2000. $ 99,500. OKUMACADET BIG BORE LNC-8C, OSP 700L CNC, 15.75" Swing, 9.84" Max Turn Diameter, 15.69" Machining Length, 12 Station Turret, 10" Chuck, 1997, Nice Machine. (2) Available. CINCINNATI 18C CNCTurning Center, Rebuilt and Retrofit by Cincinnati in 1992, Acramatic 850 CNC, 30.5" Over Bed,ProgrammableSwing-upTailstock with 34" Between Centers, 18" Chuck, 4.5" Thru Hole, 50HP, 16-1600 RPM, Excellent Condition ! FORGING PRESS 2500 TON ERIE MECHANICAL FORGING PRESS,Allen Bradley Panel Master 900 PLC, 14" Stroke, 67" x 60" Bed, 58" x 56" Ram, 150 HP, 50 SPM, Press was new in 1981 and Rebuilt and retrofit by Erie Press in 1997. CNC EDM MACHINES MAKINO EDNC65 CNC Ram Type EDM Machinestal Boring Mill,MGF 20 CNC Control, Drop Tank Design, X=25.6", Y=17.7", Z=13.7", C-Axis Rotation, 16 Station Tool Changer, Very Low Hours ! $ 149,500. WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. SIMPLEX PRODUCTION MILL with 60" Table Travel, 25HP, Arbor Support. LARGE MANUAL TABLE TYPE BORING MILL, 144" x 60" Table, 120" X-Axis Travel DOUBLE END FACING and CENTERING MACHINE to do 10" Diameter x 72" Long Pipe. WALDRICH SURFACE GRINDER 70" WIDE x 120" Long 25" PALLET HORIZONTAL MACHINING CENTER with a Full Contouring 4th asis pallet rotation. OKUMA LB -400 CNC Turning Center 500 Ton Cincinnati Plastic Injection Molder, 60oz Shot, Older OK CINCINNATI MAXIM 400 Horizontal Machining Center DeVlieg 4K60 CNC Jig Mill with Newer CNC Control CINCINNATI HAWK 200 or Hawk 250 CNC Turning Center Cincinnati Arrow 1250 or 1500, 1998 or Newer with 2100 CNC WEBB Tank Press to Hold Tank Heads and Body together while welding. HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 TO BE REMOVED : If you no longer want to receive updates on machines we have for saleyou can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.
In-Plant Surplus Machines
IN-PLANT SURPLUS !! HORIZONTAL MACHINING CENTERS CINCINNATI MILACRON MAGNUM 1000 Horizontal Machining Center,Acramatic 950 CNC Control, (4) 1000mm Pallets with 1 Degree Indexing, X=61", Y=51.2", Z=47.2", 50HP, 6500 RPM, 90 Station Tool Changer, 1998 CINCINNATI MILACRON MAGNUM 800 Horizontal Machining Center,Acramatic 950 CNC Control, (2) 800mm Pallets with 1 Degree Indexing, X=51.2", Y=43.3", Z=44.3", 50HP, 6500 RPM, 90 Station Tool Changer, 1996 CINCINNATI T-30 CNC Horizontal Machining Center, Acramatic 900CNC Control,X=40", Y=40", Z= 42", 4,000 RPM,60 Station Tool Changer, Thru SpindleCoolant,30HP, 6Pallet work Changer, (60 31.5" Square Pallets with 1 Degree Indexing, $ 39,500. VERTICAL MACHINING CENTERS OKUMA MC-60VAECNC Vertical Machining Center,Okuma OSP-7000M CNC, X=59.06", Y=24.8", Z=24.02", 60.24" x 24.8" Table, 5000 RPM, CAT-50, 22HP,20 ATC,New 1997, Big Heavy Duty Machine. CINCINNATi ARROW 500CNC Vertical Machining Center,Acramatic 2100 PC Based CNC Control, X=20", Y=20", Z= 20", 27.5" x 20" Table, 100-8000 RPM, CAT-40, 15HP,21 ATC,New 1999, From Tool Room ! Excellent Condition ! LEADWELL (2) PalletCNC Vertical Machining Center,Fanuc 18MC CNCControl, X=20", Y=14", Z= 16", (2) 26" x 13.8" WorkTables, 100-1 RPM, CAT-40, 16HP,32 ATC,New 1998 CINCINNATI SABRE 750CNC Vertical Machining Center,Acramatic 850SX CNCControl, X=30", Y=20", Z=22",6000 RPM, CAT-40, 22HP,21 ATC,New 1993, $ 14,500. Very Nice Condition ! CNC TURNINGCENTERS OKUMACADET L1420/650, OSP 700L CNC, !GF, 24.41" Swing, 14.17" Max Turn Diameter, 26.38" Machining Length, 12 Station Turret, 10" Chuck, 1996. OKUMALB-300 Big Bore with 3.1" Bar Capacity, OSP U100L CNC, 20.8" Swing, 14.56" Max Turn Diameter, 20.47" Centers, 3800 RPM, 30HP, 12 Position Turret. Collet Chuck with 1 Degree Indexing,New 2000. $ 99,500. OKUMACADET BIG BORE LNC-8C, OSP 700L CNC, 15.75" Swing, 9.84" Max Turn Diameter, 15.69" Machining Length, 12 Station Turret, 10" Chuck, 1997, Nice Machine. CINCINNATI 18C CNCTurning Center, Rebuilt and Retrofit by Cincinnati in 1992, Acramatic 850 CNC, 30.5" Over Bed,ProgrammableSwing-upTailstock with 34" Between Centers, 18" Chuck, 4.5" Thru Hole, 50HP, 16-1600 RPM, Excellent Condition ! FORGING PRESSES 5000 TON ERIE MECHANICAL FORGING PRESS,Allen Bradley Panel Master 900 PLC, 16" Stroke, 67" x 60" Bed, 58" x 56" Ram, 300 HP, 45 SPM, Press was new in 1981 and Rebuilt and retrofit by Erie Press in 1997. 2500 TON ERIE MECHANICAL FORGING PRESS,Allen Bradley Panel Master 900 PLC, 14" Stroke, 67" x 60" Bed, 58" x 56" Ram, 150 HP, 50 SPM, Press was new in 1981 and Rebuilt and retrofit by Erie Press in 1997. GUN DRILL ELDORADO 1" x 36" CNC GUN DRILL, Fanuc CNC, Eldorado Coolant System, Flo Meter, Power Bushing, (2) Whip Guides, 1 " Drilling Capacity from Solid, 1.25" Reaming Diameter, Very Well Tooled ! New Sept 2002. Used less than 100 Hours. Like New ! $ 89,500. BORING MILL Shibaura BFT-13CW3-PD Table TapeHorizontal Boring Mill,5" Spindle, 48" x 120" Table, X= 118", Y(Vertical)= 72", W= 72", Z(Quill)= 36", 50 Taper, Pendent Control, New 1978, $ 39,500. CNC RAM EDM MACHINE MAKINO EDNC65 CNC Ram Type EDM Machinestal Boring Mill,MGF 20 CNC Control, Drop Tank Design, X=25.6", Y=17.7", Z=13.7", C-Axis Rotation, 16 Station Tool Changer, Very Low Hours ! $ 149,500. WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. SIMPLEX PRODUCTION MILL with 60" Table Travel, 25HP, Arbor Support. CINCINNATI 10HC1000 CNCHorizontal Machining Center, 50 Taper. Cincinnati Arrow 1250 or 1500, 1998 or Newer with 2100 CNC HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 TO BE REMOVED : If you no longer want to receive updates on machines we have for saleyou can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.
In-Plant Surplus Machinery
e, 19" Swing inside of Water Guards, 28" Stroke, 12,500 Red Head Spindle, Rebuilt in 1988. Excellent Condition $ 14,500. 35 TON HANNIFIN C-Frame Hydraulic Straightening Press, 13" X 84" Bed, 12" Stroke, 22" Daylight, 5" Ram Diameter, 10HP, Adjustable Stroke, Adjustable Pressure, New 1964, $ 9500. 22" x 80" HMT ENGINE LATHE, Trak 102 2-Axis Digital Readouts, Taper Attachment, 12" Chuck, Inch Threading, 22.6" Swing over Ways, 13.8" Swing Over Cross, 75-2376 RPM, 15HP, 1983 $ 7,950. 44' Span, 3 Ton Bridge Crane, Made by Span Master. Bottom Running, Underhung, Twin Beam, Power Bridge, Power trolley, Pendent Control,Bridge andTrolley works great, Hoist is Bad. Down and ready to load. $2,500 Shibaura BFT-13CW3-PD Table TapeHorizontal Boring Mill,5" Spindle, 48" x 120" Table, X= 118", Y(Vertical)= 72", W= 72", Z(Quill)= 36", 50 Taper, Pendent Control, New 1978, $ 39,500. (2) COMPLETE SUB-SPINDLE ASSEMBLIES for Cincinnati Avenger Lathes.< /STRONG> TONS of Parts for Cincinnati Lancer Machining Centers, Cincinnati Maxim Machining Centers and Cincinnati MO and AT Lathes, WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. SIMPLEX PRODUCTION MILL with 60" Table Travel, 25HP, Arbor Support. 60" CNCVertical Boring Mill withLive Tooling MAKINO EDM Machine. Model EDNC65 Cincinnati Arrow 1250 or 1500, 1998 or Newer with 2100 CNC HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 TO BE REMOVED : If you no longer want to receive updates on machines we have for saleyou can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.
In Plant Surplus
ter Guards, 28" Stroke, 12,500 Red Head Spindle, Rebuilt in 1988. Excellent Condition $ 14,500. 44' Span, 3 Ton Bridge Crane, Made by Span Master. Bottom Running, Underhung, Twin Beam, Power Bridge, Power trolley, Pendent Control,Bridge andTrolley works great, Hoist is Bad. Down and ready to load. $2,500 Shibaura BFT-13CW3-PD Table TapeHorizontal Boring Mill,5" Spindle, 48" x 120" Table, X= 118", Y(Vertical)= 72", W= 72", Z(Quill)= 36", 50 Taper, Pendent Control, New 1978, $ 39,500. WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. OKUMA LU-25, LU-35, LC-30 4-Axis CNC Turning Center with Tailstock MILLTRONICS VM-17 CNC Vertical Machining Center 96" - 144" Vertical Boring Mill with Tracer or CNC Controls MATSUURA CNC Vertical Machining Center with 30"+ of X-Travel MAKINO EDM Machine. Model EDNC65 Gear Shaper with 6" Stroke and 16" Hole in the Table Cincinnati Arrow 1250 or 1500, 1998 or Newer with 2100 CNC CNC LASER MARKING MACHINE HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 We Hate SPAM just as much as you do and it's not our intention to SPAM anyone. We have been collecting email addresses on our websites since 1998 and your address is one that was registered onour site. It doesn't dous any good to send our list to someone that doesn't use machine tools or that just doesn't want our list. If you want to be removed from our mailing list you can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.
Machines for sale and some urgent needs.
ung, Twin Beam, Power Bridge, Power trolley, Pendent Control,Bridge andTrolley works great, Hoist is Bad. Down and ready to load. $2,500 Shibaura BFT-13CW3-PD Table TapeHorizontal Boring Mill,5" Spindle, 48" x 120" Table, X= 118", Y(Vertical)= 72", W= 72", Z(Quill)= 36", 50 Taper, Pendent Control, New 1978, $ 39,500. WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. MAZAK SV-20 CNC vertical Machining Center #3 or #4 Cincinnati Production Mill48" Travel or Larger. Must have rise fall. (2) Cincinnati Sabre 750 CNC Machining Centers with Acramatic 850SX CNC Controls Bridge Type Vertical Machining Center with at least 161" of X-Travel MAKINO EDM Machine. Model EDNC65 Brownand Shape Reflex 12" x 18" Manual CMM 36" Blanchard with ExtraVertical Capacity Cincinnati Arrow 1250 or 1500, 1998 or Newer with 2100 CNC Cincinnati HAWK 250 CNC Turning Center MAZAK40 Taper Horizontal Machining Center, 4800 or 5800. Urgent !! HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 We Hate SPAM just as much as you do and it's not our intention to SPAM anyone. We have been collecting email addresses on our websites since 1998 and your address is one that was registered onour site. It doesn't dous any good to send our list to someone that doesn't use machine tools or that just doesn't want our list. If you want to be removed from our mailing list you can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.
Tax Bonus for Machinery Depreciation
00 RPM, Tooling, New 1998 $ 39,500. EMCO ET-425MC Dual Spindle Dual TurretCNC TURNING CENTER with Live Tooling and Sub-spindles,Siemens 810T CNC Control, C-Axis Main Spindles, C-Axis Sub-Spindles, 1.1" Bar Capacity, 5000 RPM, 15HP, New 2000, Very Low Hours !! WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. CNC Turning Center with 20" Swing over the Cross Slide.Short centers or Chucker 4" Horizontal Boring Mill, with 48" Built-In Rotary Table. Manual Machine 8" x 160" or Larger Facing and Centering Machine, GL or Hey orOthers Hot Buyer ! Cincinnati Arrow 500 or Arrow 750 CNC Machining Centers with 2100 CNC Toshiba Bridge Type Vertical Machining Center Model 2614 or 2612 Cincinnati Lancer 1250 with Acramatic 2100 CNC Haas Mini Mill, VF-2, VF-0E, or VF-1 CNC Turning Center with 6" Hole. Chucker, Older OK,Price Buyer Cincinnati Maxim 630 or Magnum 800 CNC Horizontal Machining Center HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 We Hate SPAM just as much as you do and it's not our intention to SPAM anyone. We have been collecting email addresses on our websites since 1998 and your address is one that was registered onour site. It doesn't dous any good to send our list to someone that doesn't use machine tools or that just doesn't want our list. If you want to be removed from our mailing list you can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.
November Machinery
November Machinery Deals !! All appear to be in Very Good Condition and you are welcome to inspect them on location.Call or EmailKevin Murphy for Specs and Photos. 513-771-2111,[EMAIL PROTECTED]. If you have surplusmachines thatyou would like us to sell we can list them on the Next Email. CNC TURNINGCENTERS OKUMA LB-300 CNC TURNING CENTER, Model LB-300 Space Turn Big Bore, 20.8" Swing, 14.56" Max Turn Diameter,Collet Chuck with 3" Bar Capacity, Part Catcher, OSP U100 CNC, New 2000 OKUMA CROWN S BIG BORE CNC TURNING CENTER,Model Crown 762S-BB OSP 700 CNC, 10" 3-Jaw Chuck, 21.6" Swing, 15.75" Max Turn Diameter, Chip Conveyor, Tooling, New 1999 EMCO ET-425MC Dual Spindle Dual TurretCNC TURNING CENTER with Live Tooling and Sub-spindles,Siemens 810T CNC Control, C-Axis Main Spindles, C-Axis Sub-Spindles, 1.1" Bar Capacity, 5000 RPM, 15HP, New 2000, Very Low Hours !! MACHINING CENTERS 2004 TAKUMI High Speed Vertical Machining Center,Model Bridge 6, Selca S3045 CNC Control,X=31", Y=25.4", Z=18", 40,000 RPM,1574IPM FeedRates,16 Station Tool Changer, HSK40E Spindle, Scales, Chip Conveyor, Graphite Package, Tooling Package, New 2004, Used less than 100 Hours, Over 220K New, $ MAKE OFFER $ CHIRON FZ-12W CNC Vertical Machining Center,Fanuc 0M CNC Control, 26" x 13.8" Table, 180 Degree Work Changer, (2) 6" Nikken Rotary Tables, 10,000 RPM, X=21", Y=12", Z=16", New 1996 TREE JOURNEYMAN 2503-Axis CNC Knee Mill,Model 250, Dynapath Delta 40 CNC Control, X=26", Y=14", Z=5.91", Knee= 14.57", Programmable Speeds up to 4000 Rpm, (3 Available). Machine are out of a College Tech Center, Very Low Hours. Excellent Condition !! $ 14,500 each. MILLTRONICS VM-17 CNC Vertical Machining Center,Centroid 6 CNC Control, X=30", Y=16", Z=26",20 Station Tool Changer, 8000 RPM, Very Low Hours. Excellent Condition !! New 2001. 2001 MORI SEIKI High Speed Vertical Machining Center,Model SV-500, Fanuc CNC Control with High Speed Processing Options Installed, 20,000 High Speed Spindle,X=31.5", Y=20.1", Z=20.1",30 Station Tool Changer, Chip Conveyor, Tooling Package, New 2001, Used less than 1 shift. Ran Aluminum only. $ 119,500. TREE VMC-1260E CNC VERTICAL MACHINING CENTER,Acramatic 2100 CNC Control, X=50", Y=24", Z=30",57" x 23" Table, 30-5000 RPM, Heavy Duty CAT-50, 30HP, 32 ATC, New 1997$ 49,500. CINCINNATISABRE750 CNCVertical Machining Center, Arcamatic850SX CNC Control, X=30", Y=15", Z= 20", 8000 RPM,21Station Tool Changer, Chip Conveyor,$ 19,500. TROYKE 20" 4th Axis CNC Rotary Table with Tailstock, Horizontal or Vertical Mount, T-slotted, New 1995, Fanuc Servo Motor, Excellent Condition ! $ 6,950. MISC. MILLS, PRESSES, LATHES, PLASTIC 46" BULLARD DYNATROL Vertical Boring Mill,46" 4-Jaw Chuck, 58" Swing, 6-Position Turret Head, Side Head, 40HP, 1969. $ 29,500. HEALD #274 Universal Internal Grinder,15" Magnetic Chuck, 30" Swing over Table, 19" Swing inside of Water Guards, 28" Stroke, 12,500 Red Head Spindle, Rebuilt in 1988. Excellent Condition $ 14,500. 44' Span, 3 Ton Bridge Crane, Made by Span Master. Bottom Running, Underhung, Twin Beam, Power Bridge, Power trolley, Pendent Control, Crane andTrolley works great, Hoist is Bad. Make Offer ! Shibaura BFT-13CW3-PD Table TapeHorizontal Boring Mill,5" Spindle, 48" x 120" Table, X= 118", Y(Vertical)= 72", W= 72", Z(Quill)= 36", 50 Taper, Pendent Control, New 1978, $ 39,500. 26"x 144" LEBLONDREGAL ENGINE LATHE,18" 3-Jaw Chuck,Threading, Hard Ways, Power Rapids, 18-720 RPM, New 1963. $ 9,950. 28"/54"x 154"/216" LEBLONDSLIDING GAPENGINE LATHE,18" 3-Jaw Chuck,Threading, Hard Ways, Steady Rest,New 1968. $ 17,500. CAT-50 TOOL HOLDERS, We just purchased a Large Assortment of CAT-50 End Mill Holders, 1.5",1", 1.25",3/4",1/2", 3/8",$ 50.00 Each Cat-50 TG-150 Collet Holders $ 60.00 Each. WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. Mitsubishi Laser Model 4030 or Model 3020 4" Horizontal Boring Mill, 84" X Travel,Must be under 11' tall over all, 48" Vertical is fine. Daewoo CNCTurning CenterModels 15, 350, 450, or 600 Daewoo 250M or 230M CNC Turning Center with Live Tooling Toshiba Bridge Type Vertical Machining Center Model 2614 or 2612 GAP BED CYLINDRICAL GRINDER that will swing a 6' diameter part Cincinnati 25HC Horizontal Machining Center for Rebuild Cincinnati Lancer 1250 with Acramatic 2100 CNC Haas Mini Mill Fadal
Machinery
.00 Each. WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. 630MM Pallet CNC Horizontal Machining center. Customer wants Okuma, Mori, or Cincinnati. Okuma LNC-8 BB CNC Turning Center Daewoo CNCTurning CenterModels 15, 350, 450, or 600 Daewoo 250M or 230M CNC Turning Center with Live Tooling Toshiba Bridge Type Vertical Machining Center Model 2614 or 2612 Haas VF-1 CNC Vertical Machining Center 8" x 111" Double End Facing and Centering Machine Newer Nice machine. Good money to spend Cincinnati Roboshot 55 ,75,110, Plastic Injection Molding Machines. Hot Buyer !! Okuma Crown, Crown E, LB300, 8" Chuck Machine. 1997+ Fadal VMC 4020 or VMC 3016Mid 90's is fine Cincinnati Lancer 1500 or 1250 Vertical Machining Center with Acramatic 2100 CNC HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 We Hate SPAM just as much as you do and it's not our intention to SPAM anyone. We have been collecting email addresses on our websites since 1998 and your address is one that was registered onour site. It doesn't dous any good to send our list to someone that doesn't use machine tools or that just doesn't want our list. If you want to be removed from our mailing list you can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.
Surplus Machines
IN-PLANT SURPLUS !! All of these machines are in plants around the country under power.The owners have ask us to help them sell them. All appear to be in Very Good Condition and you are welcome to inspect them on location.Call or EmailKevin Murphy for Specs and Photos. 513-771-2111,[EMAIL PROTECTED]. If you have surplusmachines thatyou would like us to sell we can list them on the Next Email. VERTICAL MACHINING CENTERS 2004 TAKUMI High Speed Vertical Machining Center,Model Bridge 6, Selca S3045 CNC Control,X=31", Y=25.4", Z=18", 40,000 RPM,1574IPM FeedRates,16 Station Tool Changer, HSK40E Spindle, Scales, Chip Conveyor, Graphite Package, Tooling Package, New 2004, Used less than 100 Hours, Over 220K New, $ 149,500. LEADWELL MCV-760-XLD CNC VerticalMachining Center, X=30", Y=20", Z= 20",40" x 20" Table, 30-4000 RPM, 10HP, 24 ATC, Fanuc OM CNC, New 1986, $ 14,500. BRIDGEPORT TORQUE CUT 22CNC Vertical Machining Center, Model VM17, X=22", Y=16", Z= 20",22Station Tool Changer, 7500 RPM, New1996, $ 24,500 CLAUSING KONDIA B500 CNC Vertical Machining Center, X=22", Y=15", Z=15", 4500 RPM, 18 Station Tool Changer, New 1995 CINCINNATIARROW 1000 CNCVertical Machining Center, Arcamatic 2100 CNC Control, X=40", Y=20", Z=20", 6000 RPM,21Station Tool Changer, Chip Conveyor, From Aerospace, New 1998, LASER CINCINNATI CL5 CNC LASER CUTTING MACHINE, Model CL5, Dual 48"x48" Pallets, Contact and Non Contact Head System, Chiller, Rofin Sinar RS1200SM CO2 Resonator. New 1992, Make Offer !!. TURNING CENTERS CINCINNATI MILACRON CINTURN 300T/1000 CNC Turning Center, Acramatic 850SX CNC Control,22" Swing, 40" Centers, 35HP 12" 3-Jaw Chuck, 3500 RPM, Nice Heavy Machine ! $ 39,500. MISC. MILLS, PRESSES, LATHES, PLASTIC PACIFIC 200TON PRESS FORMER II, C-Frame Hydraulic Press,Model 200PFII, 200Ton Capacity, 12" Stroke, 24" x 40" Bed, 23" Open Height, 11" Shut Height, 30HP, New 1975, $ 39,500 DAVIS STANDARD 2" PLASTICEXTRUDER,Model Mark V 201, 2", 24:1 Ratio, 20 HP, Novatech Dryer, CDS Slab Haul-Off, New in 2003, 400 Hours of run time. Paid $ 170,000. New. Asking $ 79,500. Make Offer ! Shibaura BFT-13CW3-PD Table TapeHorizontal Boring Mill,5" Spindle, 48" x 120" Table, X= 118", Y(Vertical)= 72", W= 72", Z(Quill)= 36", 50 Taper, Pendent Control, New 1978, $ 39,500. Bridgeport Series I Vertical Mill,1.5HP Variable Speed Head, Power Feed on Table, True Trace 1-Axis Tracer, New 1976, $ 2,500. Alliant2HP Variable Speed Vertical Mill,Like Bridgeport, Servo BrandPower Feed on Table, 2-Axis Digital Readouts, Very Nice ! New 1973, $ 2,500. 48" x 96" Pink Granite Inspection Plate with Stand, Very Nice Condition$ 1,950 4' x 11" Asquith Radial Drill,Model OD1, #5MT, 31-830 RPM, Power Clamp Power Elevation, 1954.$ 2,950. HYSTER 3000lb Picker Style Fork Lift,Pallet Clamp, 3000Lb Cap, 202" Lift, Electric, New 1985 $ 1,495. 4300 lb TCM Fork Lift, LP Gas, 3-Stage Mast, 189" Lift, New 1983. (2) Available. Very Nice Trucks. Call for photo. New 1982, $ 3,750 Each (2) Available. (4) 24" x 48" Giddings Lewis Angle Plates, New 1983, Excellent Condition, $ 2,450. Each WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. T-Slot Table, 60" x 36" x 16" High, Will Consider up to 12" x 60" x 16" High. Makino A-55Horizontal Machining Center 1995+ 12" x 3/8" Hydraulic Shear. 1980's 5-Axis Vertical Machining Center Tilt/Swivel Spindle, The bigger the better. Horizontal Machining Center with 630mm Pallets and Must have 40" X-Axis Travel Okuma Crown, Crown E, LB300, 8" Chuck Machine. 1997+ Good 4' Arm Radial Drill with a #5 MT Spindle. 4' Only. Nice Drill under 10K. HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 We Hate SPAM just as much as you do and it's not our intention to SPAM anyone. We have been collecting email addresses on our websites since 1998 and your address is one that was registered onour site. It doesn't dous any good to send our list to someone that doesn't use machine tools or that just doesn't want our list. If you want to be removed from our mailing list you can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.
Surplus Machinery
JUST PURCHASED !! These are some machine we just purchased. Many of them have not been moved yet. Call now for special prior to moving price.Call or EmailKevin Murphy for Specs and Photos. 513-771-2111,[EMAIL PROTECTED] COORDINATE MEASURING MACHINE ZEISS Eclipse 4096 (DCC), 96" x 40" x 24" Measuring Capacity, C-99 Control, Probe, Granite Base, AutomaticProbe Changer, Umess Software, Excellent Condition ! New 1997. EMCO MULTIPLE SPINDLE CNC TURNING CENTERS EMCO ET-425MC, Siemens 810T CNC, Dual Spindle, Dual Sub-Spindle, Dual Turret, Live Tooling, Full C-axis on Mains and Subs, (4) 5C Collet Chucks, 6.3" Swing, 16.10" Between Spindles, 5000 RPM, (3) Available, New 2000, Low Hours. EMCO ET-365MC CNC Turning Center with Live Tooling and Sub-Spindle, Siemens 810 CNC Controls, FMB Magazine Bar-feeder, S-26 Collect Chucks, 23.6" Swing, 24" Between Spindles, 12 Position Turret, 6300 RPM, New 1998, Only 3000 Hrs. VERTICAL MACHINING CENTERS CLAUSING KONDIA B500 CNC Vertical Machining Center, X=22", Y=15", Z=15", 4500 RPM, 18 Station Tool Changer, New 1995 MAZAK SV-20 2-Pallet CNC Vertical Machining Center,Mazatrol M-2CNC Control, X=60" ,Y=25" ,Z=21.6",40 ATC,(2) 74.8" x 29.1" Pallets with Automatic Pallet Shuttle System, Big Heavy Square Ways, 20HP Cat-50 Geared Spindle. From a Mold Shop ! New 1988 CINCINNATI ARROW 1000 Vertical Machining Center, Acramatic 2100 CNC, X=40", Y=20", Z=20", 6000 RPM, New 1999 TREE VMC-1260ECNC Vertical Machining Center,Tree PC-2100CNC Control, X=50" ,Y=24" ,Z=30", 5000 RPM,32 ATC,25 HP, CAT-50 Spindle Taper, New1997 SUPERMAX MAX-8 CNC Vertical Machining Center, Fanuc 18M CNC, X=60" Y=30", Z=30", 50 HP, Cat-50, 4000 RPM, New 1999 ROTARY TABLE HAAS HRT-310 SP, 12.2" (310mm) Table, Brushless AC Servo, This table is Brand New !! Still inoriginal box from Haas. HORIZONTAL MACHINING CENTERS CINCINNATI T-10 CNC Horizontal Machining Center, Acramatic 900 CNC Control, (2) 18" Square Pallets, 30 ATC, Runs good Parts Everyday !, 1981, $ 9,500. MAKINO MC-98 4-AsixCNC Horizontal Machining Center, Fanuc Pro-3CNC, X= 36", Y=31.6", Z= 29.5",(2) Full Contouring24.8"Square Pallets, 60 ATC, 15,000 RPM Cat-50 Spindle, Die Mold Package, Tons of Options, New 1999 CINCINNATI MILACRON MAGUM 800CNC Horizontal Machining Center, Acramatic 950 CNC Touch Screen Programming, X=51", Y=43", Z= 44",(2) 31.5""Square Pallets, 90 ATC,Heavy Duty Cat-50 Spindle,New 1997 TURNING CENTERS MAZAK M-4CNC Flat Bed Lathe, Fanuc6T CNC, 22" Swing, 60" Centers, Front and Rear Turret, Older but Very Nice Condition, New1982, $ 14,500. CINCINNATI AVENGER 200MSCNC Turning Center with Live Tooling and Sub-Spindle,Acramatic 850SXCNC,23.54" Swing, 10.39 Swing Over Cross, 8"3-Jaw Main, 6" 3-Jaw Sub, Live Tooling, Sub-Spindle, 5000 RPM, New 1995 $ 44,500. BORING MILL Shibaura BFT-13CW3-PD Table TapeHorizontal Boring Mill,5" Spindle, 48" x 120" Table, X= 118", Y(Vertical)= 72", W= 72", Z(Quill)= 36", 50 Taper, Pendent Control, New 1978, $ 39,500. (4) 24" x 48" Giddings Lewis Angle Plates, New 1983, Excellent Condition, $ 2,450. Each WANTEDS !! HOT BUYERS Ready to plunk down cold hard cash if you have one of these that you want to sell. Cincinnati Heald #2 Cinternal with Acramatic 750 CNC 3" Bar Capacity CNC Turning Center with Sub-Spindle Okuma MX-45 or MX-55 Vetical Machining Centers Okuma CNC Turing Centers, 8" or 10" Chuck, 1994 + Cincinnati Lancer 1500 or Lancer 2000 CNC Turning Center 1997 or Newer, 60" Centers 10" or 12"Chuck Cincinnati Falcon 200 or Hawk 200 CNC Turning Center HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 We Hate SPAM just as much as you do and it's not our intention to SPAM anyone. We have been collecting email addresses on our websites since 1998 and your address is one that was registered onour site. It doesn't dous any good to send our list to someone that doesn't use machine tools or that just doesn't want our list. If you want to be removed from our mailing list you can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.
CNC Machines,Boring Mills and Fork Trucks for sale.
JUST PURCHASED !! These are some machine we just purchased. Many of them have not been moved yet. Call now for special prior to moving price.Call or EmailKevin Murphy for Specs and Photos. 513-771-2111,[EMAIL PROTECTED] VERTICAL MACHINING CENTERS CLAUSING KONDIA B500 CNC Vertical Machining Center, X=22", Y=15", Z=15", 6000 RPM, 18 Station Tool Changer, New 1997 CINCINNATI ARROW 1250 Vertical Machining Center, Acramatic 2100 CNC, X-50", Y= 20", Z= 20",6000 RPM, Cat-40, 21 ATC, New 1998 CINCINNATI ARROW 1500 CNC Vertical Machining Center, Acramatic 2100 CNC Control, X= 60" ,Y=30" ,Z= 30", 8000 RPM,Thru Spindle Coolant, 21ATC, Only50 Hours in operation ! New Sept 1999 MAZAK SV-20 2-Pallet CNC Vertical Machining Center,Mazatrol M-2CNC Control, X=60" ,Y=25" ,Z=21.6",40 ATC,(2) 74.8" x 29.1" Pallets with Automatic Pallet Shuttle System, Big Heavy Square Ways, 20HP Cat-50 Geared Spindle. From a Mold Shop ! New 1988 TREE VMC-1260ECNC Vertical Machining Center,Tree PC-2100CNC Control, X=50" ,Y=24" ,Z=30", 5000 RPM,32 ATC,25 HP, CAT-50 Spindle Taper, New1997 SUPERMAX MAX-8 CNC Vertical Machining Center, Fanuc 18M CNC, X=60" Y=30", Z=30", 50 HP, Cat-50, 4000 RPM, New 1999 HORIZONTAL MACHINING CENTERS MAKINO MC-98 4-Axis CNC Horizontal Machining Center, Fanuc Pro-3CNC, X=36", Y=31.6", Z= 29.5",(2) Full Contouring24.8"Square Pallets, 60 ATC, 15,000 RPM Spindle, Die Mold Package, Tons of Options, New 1999 TURNING CENTERS OKUMA Captain L-370 Big BoreCNC Turning Center,OSP-100LCNC, 10" Chuck, 3.15" Spindle Bore,30" Centers,New 2002. MAZAK M-4CNC Flat Bed Lathe, Fanuc6T CNC, 22" Swing, 60" Centers, Front and Rear Turret, Older but Very Nice Condition, New1982, $ 14,500. Emco ET-365MC CNC Turning Center with Live Tooling and Sub-Spindle, Siemens 810 CNC Controls, FMB Magazine Bar-feeder, S-26 Collect Chucks, New 1998, Only 3000 Hrs. CINCINNATI AVENGER 200MSCNC Turning Center with Live Tooling and Sub-Spindle,Acramatic 850SXCNC,23.54" Swing, 10.39 Swing Over Cross, 8"3-Jaw Main, 6" 3-Jaw Sub, Live Tooling, Sub-Spindle, 5000 RPM, New 1995 $ 44,500. DAEWOO PUMA-250BX BIG BORE, Fanuc CNC,12" Chuck, Tailstock,12" 3-Jaw Hydraulic Chuck, Tool Presetter, 39" Centers,Low Hours!! BORING MILL Shibaura BFT-13CW3-PD Table TapeHorizontal Boring Mill,5" Spindle, 48" x 120" Table, X=118", Y(Vertical)=72", W=72", Z(Quill)= 36", 50 Taper, Pendent Control, New 1978, $ 39,500. (4) 24" x 48" Giddings Lewis Angle Plates, New 1983, Excellent Condition, $ 2,450. Each FORK TRUCKS (2) TCM FORK TRUCKS, 4600llb Cap.,3 Stage Lift, Solid Tire, Propane, 189" Lift, Very Nice, New 1983.$ 3,750. each WANTEDS !! HOT BUYERS Ready to plunk down cold cash if you have one of these that you want to sell. Cincinnati Heald #2 Cinternal with Acramatic 750 CNC 3" Bar Capacity CNC Turning Center with Sub-Spindle Cincinnati 210 Angle Head Step Grinder 12" x 20" Big CNC Planner Mill, 3 Meter x 8 Meter Table CNC Turning Center 1997 or Newer, 60" Centers 10" or 12"Chuck Cincinnati Falcon 200 or Hawk 200 CNC Turning Center HAVE Surplus ? We need to know about it !!Our advertising reaches over 100,000 shops every week ! You could be part of that too Kevin Murphy GREAT AMERICAN EQUIPMENT CO 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 We Hate SPAM just as much as you do and it's not our intention to SPAM anyone. We have been collecting email addresses on our websites since 1998 and your address is one that was registered onour site. It doesn't dous any good to send our list to someone that doesn't use machine tools or that just doesn't want our list. If you want to be removed from our mailing list you can click on this Link to be removed http://www.gaec.com/catalog/EmailRemove.htmor you can just giveus a call at 1-800-326-4232and ask to be removed.