Re: [darktable-dev] darktable accessing lensfun issues
* Daudi Amani[04-18-18 22:43]: > i installed lensfun-0.3.2 AFTER installing Darktable 2.4.2. I am able to > verify the lens data if I select the lens ... unfortunately, Darktable is > NOT providing any persistence to the selected lens. It should be > remembering my lens choice in the .xmp file. Nor is Darktable supplying me > a list of choices of lens. As the screenshot shows, I am only given ONE > choice, which indeed is the lens designated in EXIF. However, in the case > of a manual non-CPU lens, I am NOT given ANY choices. > BTW: A careful reading of the reported issue will show that it not merely a > lensfun data issue. > > On Wed, Apr 18, 2018 at 9:29 AM Patrick Shanahan wrote: > > > * Daudi Amani [04-18-18 12:21]: > > > Issue: Darktable is not automatically recognizing lens and correcting. > > > Further, DT doesn't show a list of possible lenses to choose from which > > is > > > desirable when using a manual non-CPU lens. > > > > > > Behavior: > > > 1) each time an image is selected, DT shows (screenshot) > > > > > > 2) when I click the down-triangle to the right of the lens, it > > immediately > > > finds the correct lens (but still doesn't show me a list of all lenses > > like > > > DT older versions used to do) (screenshot). > > > > > > 3) then when I select the choice given, it fills out corrections: > > > > > > 4) BUT, if I select a different image and then come back to this one, it > > no > > > longer remembers the lens which I had selected and the entire process > > must > > > be manually repeated. Of course, if I close DT, then reopen, it doesn't > > > remember either. > > > > > > 5) Never does it give me an option to view a list of all available lens > > > choices. > > > > > > > > > camera: I'm using a Nikon D5600 in RAW mode with one of three lens: > > Nikkor > > > 18-55mm, Nikkor 55-200mm, legacy (non-CPU) Nikkor 135mm. > > > > > > Darktable v2.4.2 > > > Lensfun 0.3.2 > > > OS: Ubuntu 16.04 > > > > did you try lensfun-update-data > > > > > > > > > > -- > > (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri > > http://en.opensuse.orgopenSUSE Community Memberfacebook/ptilopteri > > Registered Linux User #207535@ http://linuxcounter.net > > Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode > > ___ > > darktable developer mailing list > > to unsubscribe send a mail to > > darktable-dev+unsubscr...@lists.darktable.org > > > > > > ___ > darktable developer mailing list > to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org you lense[s] is/are in the lensfun-data? and you know that lensfun-update-data provides you newer lenses than the install package? and it's idenity matches exif data? aiui, dt *only* uses the data available in the lensfun package. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.orgopenSUSE Community Memberfacebook/ptilopteri Registered Linux User #207535@ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode ___ darktable developer mailing list to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
Re: [darktable-dev] darktable accessing lensfun issues
i installed lensfun-0.3.2 AFTER installing Darktable 2.4.2. I am able to verify the lens data if I select the lens ... unfortunately, Darktable is NOT providing any persistence to the selected lens. It should be remembering my lens choice in the .xmp file. Nor is Darktable supplying me a list of choices of lens. As the screenshot shows, I am only given ONE choice, which indeed is the lens designated in EXIF. However, in the case of a manual non-CPU lens, I am NOT given ANY choices. BTW: A careful reading of the reported issue will show that it not merely a lensfun data issue. On Wed, Apr 18, 2018 at 9:29 AM Patrick Shanahanwrote: > * Daudi Amani [04-18-18 12:21]: > > Issue: Darktable is not automatically recognizing lens and correcting. > > Further, DT doesn't show a list of possible lenses to choose from which > is > > desirable when using a manual non-CPU lens. > > > > Behavior: > > 1) each time an image is selected, DT shows (screenshot) > > > > 2) when I click the down-triangle to the right of the lens, it > immediately > > finds the correct lens (but still doesn't show me a list of all lenses > like > > DT older versions used to do) (screenshot). > > > > 3) then when I select the choice given, it fills out corrections: > > > > 4) BUT, if I select a different image and then come back to this one, it > no > > longer remembers the lens which I had selected and the entire process > must > > be manually repeated. Of course, if I close DT, then reopen, it doesn't > > remember either. > > > > 5) Never does it give me an option to view a list of all available lens > > choices. > > > > > > camera: I'm using a Nikon D5600 in RAW mode with one of three lens: > Nikkor > > 18-55mm, Nikkor 55-200mm, legacy (non-CPU) Nikkor 135mm. > > > > Darktable v2.4.2 > > Lensfun 0.3.2 > > OS: Ubuntu 16.04 > > did you try lensfun-update-data > > > > > -- > (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri > http://en.opensuse.orgopenSUSE Community Memberfacebook/ptilopteri > Registered Linux User #207535@ http://linuxcounter.net > Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode > ___ > darktable developer mailing list > to unsubscribe send a mail to > darktable-dev+unsubscr...@lists.darktable.org > > ___ darktable developer mailing list to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
Re: [darktable-dev] darktable accessing lensfun issues
On 4/18/18 12:29 PM, Patrick Shanahan wrote: did you try lensfun-update-data For what it's worth, I have the same problem and have verified that the lensfun data is current. --Mark ___ darktable developer mailing list to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
Fwd: Re: [darktable-dev] Help needed for creating the HTML darktable manual.
Hello Ulrich, I saw you replay at the other thread, but until now I didn't have the time to check. I'm using Manjaro Linux. In the README.md in folder ./doc I can find the following list of packages which I have to install to build the user manual. - Java JDK, `gnome-doc-utils`, Saxon 6.5.x, FOP and ImageMagick - `xsltproc` and the DocBook XML DTD and XSL stylesheets On my system I have installed: * jdk8-openjdk * gnome-doc-utils (Version 0.20.10+16+gc03cc09-1) * saxon-he (Version 9.8.0.1-1) * fop (Version 2.2-1) * ImageMagick (Version 7.0.7.28-1) * DocBook-xml (Version 4.5-6) * DocBook-xsl (Version 1.79.2-4) and additionally docbook-xsl-saxon (Version 1.00-3) I did not found and I have not installed the package *xcltproc!* Where can I find the package *xcltproc?* Or is it a vault of the saxon-he package? Thanks Pierre ___ darktable developer mailing list to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org--- Begin Message --- Did you read my reply on the other thread you have opened here? And did you take appropriate action, like properly installing saxon? Ulrich Am 16.04.2018 um 20:08 schrieb openhab.doc: Hello Simon (sturmflut), in my e-mail below was an copy and paste error. The complete error message is: [mepi@mepi-pc build (master)]$ make darktable-usermanual-dtorg [ 93%] Built target target_media_images [ 93%] Built target darktable-usermanual-dtorg-images [ 93%] Building the en usermanual for darktable.orgFehler: Hauptklasse com.icl.saxon.StyleSheet konnte nicht gefunden oder geladen werden make[3]: *** [doc/usermanual/CMakeFiles/darktable-usermanual-dtorg-en.dir/ build.make:62: doc/usermanual/dtorg/en/index.html] Fehler 1 make[2]: *** [CMakeFiles/Makefile2:8425: doc/usermanual/CMakeFiles/darktable- usermanual-dtorg-en.dir/all] Fehler 2 make[1]: *** [CMakeFiles/Makefile2:8158: doc/usermanual/CMakeFiles/darktable- usermanual-dtorg.dir/rule] Fehler 2 make: *** [Makefile:2656: darktable-usermanual-dtorg] Fehler 2 I'm using Manjaro Linux. My next steps are to check if I have installed all needed packages. I'm not sure if saxon-he is able to build the HTML darktable manual. I have no problems to build the PDF user manual. cheers, Pierre Am Montag, 16. April 2018, 08:38:05 CEST schrieb sturmflut: Hello, I'm a bit confused. That's not an error message, but one of the normal build messages? cheers, Simon On 14.04.2018 08:30, openhab@web.de wrote: Hello, I need help creating the HTML darktable manual. When I try to create the HTML documentation with command make darktable-usermanual-dtorg I get the following error message: [mepi@mepi-pc build (master)]$ make darktable-usermanual-dtorg *Building the en usermanual for darktable.org* Do I still have to install anything under Linux? Ideas what I'm doing wrong? Thanks for help in advance! Pierre Metzner (mepi0011) __ ___ darktable developer mailing list to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org --- End Message ---
Re: [darktable-dev] darktable accessing lensfun issues
* Daudi Amani[04-18-18 12:21]: > Issue: Darktable is not automatically recognizing lens and correcting. > Further, DT doesn't show a list of possible lenses to choose from which is > desirable when using a manual non-CPU lens. > > Behavior: > 1) each time an image is selected, DT shows (screenshot) > > 2) when I click the down-triangle to the right of the lens, it immediately > finds the correct lens (but still doesn't show me a list of all lenses like > DT older versions used to do) (screenshot). > > 3) then when I select the choice given, it fills out corrections: > > 4) BUT, if I select a different image and then come back to this one, it no > longer remembers the lens which I had selected and the entire process must > be manually repeated. Of course, if I close DT, then reopen, it doesn't > remember either. > > 5) Never does it give me an option to view a list of all available lens > choices. > > > camera: I'm using a Nikon D5600 in RAW mode with one of three lens: Nikkor > 18-55mm, Nikkor 55-200mm, legacy (non-CPU) Nikkor 135mm. > > Darktable v2.4.2 > Lensfun 0.3.2 > OS: Ubuntu 16.04 did you try lensfun-update-data -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.orgopenSUSE Community Memberfacebook/ptilopteri Registered Linux User #207535@ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode ___ darktable developer mailing list to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
[darktable-dev] darktable accessing lensfun issues
Issue: Darktable is not automatically recognizing lens and correcting. Further, DT doesn't show a list of possible lenses to choose from which is desirable when using a manual non-CPU lens. Behavior: 1) each time an image is selected, DT shows (screenshot) 2) when I click the down-triangle to the right of the lens, it immediately finds the correct lens (but still doesn't show me a list of all lenses like DT older versions used to do) (screenshot). 3) then when I select the choice given, it fills out corrections: 4) BUT, if I select a different image and then come back to this one, it no longer remembers the lens which I had selected and the entire process must be manually repeated. Of course, if I close DT, then reopen, it doesn't remember either. 5) Never does it give me an option to view a list of all available lens choices. camera: I'm using a Nikon D5600 in RAW mode with one of three lens: Nikkor 18-55mm, Nikkor 55-200mm, legacy (non-CPU) Nikkor 135mm. Darktable v2.4.2 Lensfun 0.3.2 OS: Ubuntu 16.04 EXIF data: $ exiftool 0DA_1754.NEF | grep Lens Lens Type : G VR Lens: 18-55mm f/3.5-5.6 Lens Data Version : 0204 Lens ID Number : 162 Lens F Stops: 5.33 Lens ID : AF-S DX VR Nikkor 18-55mm f/3.5-5.6G II Lens: 18-55mm f/3.5-5.6 G VR $ exiftool 0DA_1758.NEF | grep Lens Lens Type : G Lens: 55-200mm f/4-5.6 Lens Data Version : 0204 Lens ID Number : 137 Lens F Stops: 5.00 Lens ID : AF-S DX Zoom-Nikkor 55-200mm f/4-5.6G ED Lens: 55-200mm f/4-5.6 G I've updated the .xmp lensfun data to exactly match above entries but to no avail re this issue. ___ darktable developer mailing list to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org