Re: [darktable-user] darktable-chart fails to recognize my cie file

[Victor]

I mean that when I try to load the ColorCheckerPassport.cie file nothing 
happens, the file is not loaded at all. As a consequence I cannot go on 
with the compilation.


Il 25/08/20 13:26, Matt Maguire ha scritto:
Procedure sounds right. What do you mean by "I got stuck. No way for 
the cie file to show up and go on"? Can you be a bit more specific 
about what you did and what you observed?


On Tue, 25 Aug 2020 at 21:00, Victor > wrote:


Sorry I sent the following message with incomplete re.

I'm trying to create a color profile for real color of my Sony
a6600 following the instructions in
https://pixls.us/articles/profiling-a-camera-with-darktable-chart/ .

Therefore I shot my ColorCheckerPassport, created the pfm file
from the raw file,  loaded it as source image referring to chart
ColorCheckerPassport.cht. All this successfully.

BUT... in the tab 'reference values' selecting, as required, the
mode as /cie/it8 file/ and loading the corresponding CIE, that is,
in my case, ColorCheckerPassport.cie I got stuck. No way of the
cie file to show up and going on.

What was wrong with my procedure?

Thanks a lot

Vittorio



darktable user mailing list to unsubscribe send a mail to
darktable-user+unsubscr...@lists.darktable.org





darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

Re: [darktable-user] darktable-chart fails to recognize my cie file

[Matt Maguire]

Procedure sounds right. What do you mean by "I got stuck. No way for the
cie file to show up and go on"? Can you be a bit more specific about what
you did and what you observed?

On Tue, 25 Aug 2020 at 21:00, Victor  wrote:

> Sorry I sent the following message with incomplete re.
>
> I'm trying to create a color profile for real color of my Sony a6600
> following the instructions in
> https://pixls.us/articles/profiling-a-camera-with-darktable-chart/ .
>
> Therefore I shot my ColorCheckerPassport, created the pfm file from the
> raw file,  loaded it as source image referring to chart
> ColorCheckerPassport.cht. All this successfully.
>
> BUT... in the tab 'reference values' selecting, as required, the mode as 
> *cie/it8
> file* and loading the corresponding CIE, that is, in my case,
> ColorCheckerPassport.cie I got stucked. No way of the cie file to show up
> and going on.
>
> What was wrong with my procedure?
>
> Thanks a lot
>
> Vittorio
>
> 
> darktable user mailing list to unsubscribe send a mail to
> darktable-user+unsubscr...@lists.darktable.org
>


darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

[darktable-user] darktable-chart fails to recognize my cie file

[Victor]

Sorry I sent the following message with incomplete re.

I'm trying to create a color profile for real color of my Sony a6600 
following the instructions in 
https://pixls.us/articles/profiling-a-camera-with-darktable-chart/ .


Therefore I shot my ColorCheckerPassport, created the pfm file from the 
raw file,  loaded it as source image referring to chart 
ColorCheckerPassport.cht. All this successfully.


BUT... in the tab 'reference values' selecting, as required, the mode as 
/cie/it8 file/ and loading the corresponding CIE, that is, in my case, 
ColorCheckerPassport.cie I got stucked. No way of the cie file to show 
up and going on.


What was wrong with my procedure?

Thanks a lot

Vittorio



darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org