Bug#400495: installation failed on Acer Aspire 9411AWSMi
Hi Frans, I've got a laptop with SATA cdrom/drive, the controller is an ICH7 . I tried different boot method: - install libata.atapi_enabled=1 FAILED - expert , then chose only ide-generic, ide-cd and isofs to detect the sata drive - failed (see Errata for release 3.1r0, http://www.debian.org/releases/stable/debian-installer/) - boot from usbdrive, tried to modprobe relevant modules - failed you can get my laptop spec from here: http://global.acer.com/products/notebook/as9410.htm cheers, chantra On Sunday 26 November 2006 18:06, chantra wrote: Comments/Problems: The installer boots fine, but when it come to CD drive detection, it fails so you can't go on the installation. Note that the daily builds were known to be broken for a few days, but should be fixed again now. If it still does not work with a new daily image, could you please try the troubleshooting instructions at: http://d-i.alioth.debian.org/manual/en.i386/ch05s03.html#unreliable-cd Cheers, FJP -- http://www.debuntu.org http://repository.debuntu.org
Bug#400715: apt-setup: typo n'a pas acceder in French translation
Package: apt-setup Version: 1:0.16 Severity: minor Tags: l10n trunk/packages/po/fr.po revision 42479 contains at line 6111 Le programme d'installation n'a pas accéder au miroir. There's a pu missing, so this should read Le programme d'installation n'a pas pu accéder au miroir.
Bug#400313: logs...
Sorry for much wait, but i had not been able to try again the installation because i was occupied in last time, however the logs is here: Hardware-summary: http://www.spyro.it/bugs/debian/logs/hardware-summary.tar.gz Portman: http://www.spyro.it/bugs/debian/logs/partman.tar.gz Syslog: http://www.spyro.it/bugs/debian/logs/syslog.tar.gz These log are of 3 days of time. Thanks! Eric (SpyroTSK) Papais. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Cause of g-i crashing on AMD64 at VT switch found
Attilio Fiandrotti wrote: Hi i recently put my hands on an AMD64 machine, so i had the chance to run the installer from a chroot and i noticed that the crash produces this log libgcc_s.so.1 must be installed for pthread_cancel to work (!) [ 5905:0.000] -- Caught signal 6 (unknown origin) -- libgcc_s.so.1 must be installed for pthread_cancel to work Aborted adding this library (and full libc) to the chroot prevents the crash. Yesterday i tried to dig a bit some more in this issue, but i had no luck. It looks like libgcc is needed on AMD64 only, on i386 i culd not find this library in the ISO, and i wonder why AMD64 differs from i386. I haven't the skills to solve this issue, so if no one comes at rescue i'll ask d-gcc guys, who maintain libgcc. cheers Attilio -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: Closing this bug
Processing commands for [EMAIL PROTECTED]: close 355946 Bug#355946: GTK frontend does not display correctly obj-info message in some circumstances 'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing. Bug closed, send any further explanations to Attilio Fiandrotti [EMAIL PROTECTED] thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#400766: user-setup: using (go back) leads to a system without root-password and without sudo
Package: user-setup Severity: normal Installer used: Debian GNU/Linux testing Etch - Official Snapshot netinst i386 Binary-1 20061128-09:23 When configuring users, i can choose to setup the root account with a password, or without a password, which will setup sudo to give the normal user sudo rights. But... when i choose 'Enable root account' - No, probably fill in a name for the normal user, but choose (go back) and then choose 'Enable root account' - Yes, the questions to set the root password won't be asked. A normal user (e.g. 'piet' is created, root does not have a password and also sudo is not set up to give piet sudo rights. So after the installation i'm left with an unusable situation: # cat passwd | head -n 1 root:x:0:0:root:/root:/bin/bash # cat shadow | head -n 1 root:!:13480:0:9:7::: # cat /etc/sudoers | grep piet # I cannot sudo or su or whatever. When typing in the username the second time (after choosing root-yes) i made a typo in the username 'piet', so i did (go back) that particular step, perhaps that explains some of the log below: From /var/log/installer/cdebconf/questions.dat: [...] Name: passwd/make-user Template: passwd/make-user Value: true Owners: user-setup-udeb Name: passwd/root-login Template: passwd/root-login Value: true Owners: user-setup-udeb Name: passwd/shadow Template: passwd/shadow Value: true Owners: user-setup-udeb Name: passwd/user-fullname Template: passwd/user-fullname Value: Piet Owners: user-setup-udeb Name: passwd/user-uid Template: passwd/user-uid Owners: user-setup-udeb Name: passwd/username Template: passwd/username Value: piet Owners: user-setup-udeb Name: passwd/username-bad Template: passwd/username-bad Owners: user-setup-udeb Name: passwd/username-reserved Template: passwd/username-reserved Owners: user-setup-udeb [...] Name: user-setup/password-empty Template: user-setup/password-empty Owners: user-setup-udeb Name: user-setup/password-mismatch Template: user-setup/password-mismatch Owners: user-setup-udeb [eof] Hans van Kranenburg -- System Information: Debian Release: 4.0 Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: 2.6.17-2-686 Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processing of preseed_1.22_i386.changes
preseed_1.22_i386.changes uploaded successfully to localhost along with the files: preseed_1.22.dsc preseed_1.22.tar.gz preseed-common_1.22_all.udeb network-preseed_1.22_all.udeb file-preseed_1.22_all.udeb initrd-preseed_1.22_all.udeb env-preseed_1.22_all.udeb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
preseed_1.22_i386.changes ACCEPTED
Accepted: env-preseed_1.22_all.udeb to pool/main/p/preseed/env-preseed_1.22_all.udeb file-preseed_1.22_all.udeb to pool/main/p/preseed/file-preseed_1.22_all.udeb initrd-preseed_1.22_all.udeb to pool/main/p/preseed/initrd-preseed_1.22_all.udeb network-preseed_1.22_all.udeb to pool/main/p/preseed/network-preseed_1.22_all.udeb preseed-common_1.22_all.udeb to pool/main/p/preseed/preseed-common_1.22_all.udeb preseed_1.22.dsc to pool/main/p/preseed/preseed_1.22.dsc preseed_1.22.tar.gz to pool/main/p/preseed/preseed_1.22.tar.gz Override entries for your package: env-preseed_1.22_all.udeb - extra debian-installer file-preseed_1.22_all.udeb - optional debian-installer initrd-preseed_1.22_all.udeb - extra debian-installer network-preseed_1.22_all.udeb - standard debian-installer preseed-common_1.22_all.udeb - standard debian-installer preseed_1.22.dsc - source misc Announcing to debian-devel-changes@lists.debian.org Closing bugs: 400694 Thank you for your contribution to Debian. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Installing with an USB memory stick on IA-64
Hi, I couldn't find out why there is no choice to boot and install Debian from an USB memory stick on the IA-64 architecture. Is it impossible? Are there plans to create a boot.img.gz for IA-64? -- regards Max Moritz Sievers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[g-i] new screenshots available (dejavu 2.12)
I took some screenshots using latest dejavu 2.12; please refer to [1] to see what changed since version 2.11. Note that Hebrew is now using glyphs from Dejavu rather than from Freefont (see [2]) The screenshots can be found in [3], and in case you wanted to compare them to those taken using the previous version, see [4] feedback is very welcome regards, Davide PS: text files used to take the screenshots are outdated so there might be problems like [5]. let me know if you want me to take screenshots of something more recent [1] http://dejavu.sourceforge.net/wiki/index.php/News [2] http://lists.debian.org/debian-boot/2006/11/msg01238.html [3] http://d-i.alioth.debian.org/gtk-frontend/screenshots/20061128_dejavu2.12 [4] http://d-i.alioth.debian.org/gtk-frontend/screenshots/20061030_dejavu2.11 [5] http://lists.debian.org/debian-i18n/2006/10/msg00294.html signature.asc Description: Digital signature
Re: [g-i] arm port
On Mon, 09 Oct 2006 23:50:12 +0200, Davide Viti wrote: ... As suggested by Denis the problem is that directfb supports RGB and not BGR, but looks like the fb is BGR. Here's an update (conversation took place on #debian-arm pbrook I suspect there's a bug in the qemu LCD controller implementation that makes it reverse the R and B channels sometimes. zinosat pbrook, nice. should I file a BR or just ask on #qemu? pbrook The PL110 CLCDC hardware supports both RGB and BGR, it's possible Igot one or both of them wrong. There's a TODO in the code related to it. pbrook I wrote the code, so this is probably the best answer you're going to get :-) zinosat heh :) pbrook I've never looked close enough to figure our whether the emulator is wrong, or the FB driver is setting up the hardware wrong. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: tagging 400766
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.9.26 tags 400766 patch Bug#400766: user-setup: using (go back) leads to a system without root-password and without sudo There were no tags set. Tags added: patch End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#400715: apt-setup: typo n'a pas acceder in French translation
tags 400715 pending thanks Quoting Filipus Klutiero ([EMAIL PROTECTED]): Package: apt-setup Version: 1:0.16 Severity: minor Tags: l10n trunk/packages/po/fr.po revision 42479 contains at line 6111 Le programme d'installation n'a pas accéder au miroir. There's a pu missing, so this should read Le programme d'installation n'a pas pu accéder au miroir. Fixed in SVN -- signature.asc Description: Digital signature
Processed: Re: Bug#400715: apt-setup: typo n'a pas acceder in French translation
Processing commands for [EMAIL PROTECTED]: tags 400715 pending Bug#400715: apt-setup: typo n'a pas acceder in French translation Tags were: l10n Tags added: pending thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Cause of g-i crashing on AMD64 at VT switch found
On Tue, Nov 28, 2006 at 12:42:03PM +0100, Attilio Fiandrotti wrote: Yesterday i tried to dig a bit some more in this issue, but i had no luck. It looks like libgcc is needed on AMD64 only, on i386 i culd not find this library in the ISO, and i wonder why AMD64 differs from i386. I haven't the skills to solve this issue, so if no one comes at rescue i'll ask d-gcc guys, who maintain libgcc. googling a bit shows that many ppl reported problems related to pthread_cancel() See for example: #360933 #294322 http://lists.debian.org/debian-amd64/2004/10/msg00046.html just looking for libgcc_s.so.1 must be installed for pthread_cancel to work brings up a lot of messages regards, Davide signature.asc Description: Digital signature
pthread_cancel() problem on AMD64
Hi I'm posting here to get some help with bug #373253 that we found in Etch's graphical installer. On AMD64 only (this bug doesn't affect i386 nor PPC) when a VT switch is performed, DirectFB issues a pthread_cancel which results in libgcc_s.so.1 must be installed for pthread_cancel to work Aborted Adding this library to the debian-installer allows performing correctly the VT switch. But this library was found not to be required on i386 nor PPC: should we add it or this would be just a workaround for something else which is broken? Googling around, we found that bug #360933 may be somehow related to this bug, but we really need specialized help here. thanks Attilio Fiandrotti -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#400313: Bug Solved?
Now the bug is solved? In english installation is ok...someone has repaired the problem? Here is locate the new logs, in english: Hardware-summary:http://www.spyro.it/bugs/debian/logs/400313/hardware-summary.tar.gz Portman: http://www.spyro.it/bugs/debian/logs/ http://www.spyro.it/bugs/debian/logs/400313/partman.tar.gz400313/ http://www.spyro.it/bugs/debian/logs/hardware-summary.tar.gzpartman.tar.gz http://www.spyro.it/bugs/debian/logs/partman.tar.gz Syslog: http://www.spyro.it/bugs/debian/logs/ http://www.spyro.it/bugs/debian/logs/syslog.tar.gz400313/ http://www.spyro.it/bugs/debian/logs/400313/hardware-summary.tar.gzsyslog.tar.gz http://www.spyro.it/bugs/debian/logs/syslog.tar.gz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#400766: user-setup: using (go back) leads to a system without root-password and without sudo
Hans van Kranenburg wrote: But... when i choose 'Enable root account' - No, probably fill in a name for the normal user, but choose (go back) and then choose 'Enable root account' - Yes, the questions to set the root password won't be asked. A normal user (e.g. 'piet' is created, root does not have a password and also sudo is not set up to give piet sudo rights. So after the installation i'm left with an unusable situation: Thanks for a very clear problem report. The bug is here: db_get passwd/root-login if [ $RET = false ]; then # root password will be locked db_set passwd/root-password db_set passwd/root-password-crypted ! First time through, these values are set. The second time through, it thinks these have been preseeded, so doesn't ask for a root password. Here's a patch, which I have not tested: Index: debian/changelog === --- debian/changelog(revision 42928) +++ debian/changelog(working copy) @@ -1,3 +1,12 @@ +user-setup (1.8) UNRELEASED; urgency=low + + * Fix backing up after having chosen to not enable root logins, and changing +it to enable root logins. Since the crypted password was set to a locked +passowrd in the first pass, the second pass failed to ask for a root +password. Closes: #400766 + + -- Joey Hess [EMAIL PROTECTED] Tue, 28 Nov 2006 14:49:36 -0500 + user-setup (1.7) unstable; urgency=low [ Updated translations ] Index: user-setup-ask === --- user-setup-ask (revision 42928) +++ user-setup-ask (working copy) @@ -46,10 +46,12 @@ db_set passwd/root-password-crypted ! elif ! root_password; then # First check whether the root password was preseeded crypted + # to an actual password (not locked). db_get passwd/root-password-crypted || true - if ! test $RET ; then + if ! test $RET || [ $RET = ! ]; then # No preseed of the root password hash # we will prompt the user + db_set passwd/root-password-crypted db_input critical passwd/root-password || true db_input critical passwd/root-password-again || true fi -- see shy jo signature.asc Description: Digital signature
Bug#400715: apt-setup: typo n'a pas acceder in French translation
Quoting Filipus Klutiero ([EMAIL PROTECTED]): trunk/packages/po/fr.po revision 42479 contains at line 6111 Le programme d'installation n'a pas accéder au miroir. There's a pu missing, so this should read Le programme d'installation n'a pas pu accéder au miroir. Hmmm, a pu de pu, quoi en résumé...:-) (non-french speakers, a pu de something is a common trivial way to just say there is no more something) Thanks, Philippe, for spotting that one...I'll correct it ASAP. -- signature.asc Description: Digital signature
Installing with an USB memory stick on IA-64
Hi, I couldn't find out why there is no choice to boot and install Debian from an USB memory stick on the IA-64 architecture. Is it impossible? Are there plans to create a boot.img.gz for IA-64? -- regards Max Moritz Sievers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
linux-kernel-di-sparc-2.6_1.15_sparc.changes ACCEPTED
Accepted: cdrom-core-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/cdrom-core-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb cdrom-core-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/cdrom-core-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb crypto-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/crypto-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb crypto-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/crypto-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb ext3-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ext3-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb ext3-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ext3-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb fat-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/fat-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb fat-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/fat-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb ide-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ide-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb ipv6-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ipv6-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb ipv6-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ipv6-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb jfs-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/jfs-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb kernel-image-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/kernel-image-2.6.18-3-sparc32-di_1.15_sparc.udeb kernel-image-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/kernel-image-2.6.18-3-sparc64-di_1.15_sparc.udeb linux-kernel-di-sparc-2.6_1.15.dsc to pool/main/l/linux-kernel-di-sparc-2.6/linux-kernel-di-sparc-2.6_1.15.dsc linux-kernel-di-sparc-2.6_1.15.tar.gz to pool/main/l/linux-kernel-di-sparc-2.6/linux-kernel-di-sparc-2.6_1.15.tar.gz md-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/md-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb md-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/md-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb nic-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/nic-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb nic-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/nic-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb plip-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/plip-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb plip-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/plip-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb ppp-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ppp-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb ppp-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ppp-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb reiserfs-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/reiserfs-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb reiserfs-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/reiserfs-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb sata-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/sata-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb scsi-common-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/scsi-common-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb scsi-common-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/scsi-common-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb scsi-core-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/scsi-core-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb scsi-core-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/scsi-core-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb scsi-extra-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/scsi-extra-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb usb-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/usb-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb xfs-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/xfs-modules-2.6.18-3-sparc32-di_1.15_sparc.udeb xfs-modules-2.6.18-3-sparc64-di_1.15_sparc.udeb to
linux-kernel-di-powerpc-2.6_1.24_powerpc.changes ACCEPTED
Accepted: affs-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/affs-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb affs-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/affs-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb affs-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/affs-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb affs-modules-2.6.18-3-prep-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/affs-modules-2.6.18-3-prep-di_1.24_powerpc.udeb cdrom-core-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/cdrom-core-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb cdrom-core-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/cdrom-core-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb cdrom-core-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/cdrom-core-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb cdrom-core-modules-2.6.18-3-prep-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/cdrom-core-modules-2.6.18-3-prep-di_1.24_powerpc.udeb crypto-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/crypto-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb crypto-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/crypto-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb crypto-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/crypto-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb crypto-modules-2.6.18-3-prep-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/crypto-modules-2.6.18-3-prep-di_1.24_powerpc.udeb ext2-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/ext2-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb ext2-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/ext2-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb ext2-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/ext2-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb ext2-modules-2.6.18-3-prep-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/ext2-modules-2.6.18-3-prep-di_1.24_powerpc.udeb ext3-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/ext3-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb ext3-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/ext3-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb ext3-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/ext3-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb ext3-modules-2.6.18-3-prep-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/ext3-modules-2.6.18-3-prep-di_1.24_powerpc.udeb fancontrol-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/fancontrol-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb fat-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/fat-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb fat-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/fat-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb fat-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/fat-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb fat-modules-2.6.18-3-prep-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/fat-modules-2.6.18-3-prep-di_1.24_powerpc.udeb firewire-core-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/firewire-core-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb firewire-core-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/firewire-core-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb firewire-core-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/firewire-core-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb firewire-core-modules-2.6.18-3-prep-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/firewire-core-modules-2.6.18-3-prep-di_1.24_powerpc.udeb firmware-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/firmware-modules-2.6.18-3-powerpc-di_1.24_powerpc.udeb firmware-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb to pool/main/l/linux-kernel-di-powerpc-2.6/firmware-modules-2.6.18-3-powerpc-miboot-di_1.24_powerpc.udeb firmware-modules-2.6.18-3-powerpc64-di_1.24_powerpc.udeb to
linux-kernel-di-mipsel-2.6_0.8_mipsel.changes ACCEPTED
Accepted: cdrom-core-modules-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/cdrom-core-modules-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb cdrom-core-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/cdrom-core-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb cdrom-core-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/cdrom-core-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb crypto-modules-2.6.18-3-r3k-kn02-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-modules-2.6.18-3-r3k-kn02-di_0.8_mipsel.udeb crypto-modules-2.6.18-3-r4k-kn04-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-modules-2.6.18-3-r4k-kn04-di_0.8_mipsel.udeb crypto-modules-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-modules-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb crypto-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb crypto-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb fat-modules-2.6.18-3-qemu-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fat-modules-2.6.18-3-qemu-di_0.8_mipsel.udeb fat-modules-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fat-modules-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb fat-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fat-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb fat-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fat-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb fb-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fb-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb fb-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fb-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb ide-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ide-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb ide-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ide-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb input-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/input-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb input-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/input-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb ipv6-modules-2.6.18-3-r3k-kn02-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ipv6-modules-2.6.18-3-r3k-kn02-di_0.8_mipsel.udeb ipv6-modules-2.6.18-3-r4k-kn04-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ipv6-modules-2.6.18-3-r4k-kn04-di_0.8_mipsel.udeb ipv6-modules-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ipv6-modules-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb ipv6-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ipv6-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb ipv6-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ipv6-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb jfs-modules-2.6.18-3-qemu-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/jfs-modules-2.6.18-3-qemu-di_0.8_mipsel.udeb jfs-modules-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/jfs-modules-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb jfs-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/jfs-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb jfs-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/jfs-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb kernel-image-2.6.18-3-qemu-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/kernel-image-2.6.18-3-qemu-di_0.8_mipsel.udeb kernel-image-2.6.18-3-r3k-kn02-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/kernel-image-2.6.18-3-r3k-kn02-di_0.8_mipsel.udeb kernel-image-2.6.18-3-r4k-kn04-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/kernel-image-2.6.18-3-r4k-kn04-di_0.8_mipsel.udeb kernel-image-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/kernel-image-2.6.18-3-r5k-cobalt-di_0.8_mipsel.udeb kernel-image-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/kernel-image-2.6.18-3-sb1-bcm91250a-di_0.8_mipsel.udeb kernel-image-2.6.18-3-sb1a-bcm91480b-di_0.8_mipsel.udeb to
linux-kernel-di-alpha-2.6_0.11_alpha.changes ACCEPTED
Accepted: cdrom-core-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/cdrom-core-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb cdrom-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/cdrom-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb crc-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/crc-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb crypto-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/crypto-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb ext3-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/ext3-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb fat-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/fat-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb fb-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/fb-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb firmware-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/firmware-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb ide-core-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/ide-core-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb ide-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/ide-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb ipv6-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/ipv6-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb jfs-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/jfs-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb kernel-image-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/kernel-image-2.6.18-3-alpha-generic-di_0.11_alpha.udeb linux-kernel-di-alpha-2.6_0.11.dsc to pool/main/l/linux-kernel-di-alpha-2.6/linux-kernel-di-alpha-2.6_0.11.dsc linux-kernel-di-alpha-2.6_0.11.tar.gz to pool/main/l/linux-kernel-di-alpha-2.6/linux-kernel-di-alpha-2.6_0.11.tar.gz md-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/md-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb nic-extra-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/nic-extra-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb nic-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/nic-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb nic-shared-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/nic-shared-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb parport-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/parport-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb plip-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/plip-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb ppp-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/ppp-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb reiserfs-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/reiserfs-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb sata-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/sata-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb scsi-common-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/scsi-common-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb scsi-core-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/scsi-core-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb scsi-extra-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/scsi-extra-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb scsi-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/scsi-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb srm-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/srm-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb usb-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/usb-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb usb-serial-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/usb-serial-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb usb-storage-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb to pool/main/l/linux-kernel-di-alpha-2.6/usb-storage-modules-2.6.18-3-alpha-generic-di_0.11_alpha.udeb
linux-kernel-di-mips-2.6_0.8_mips.changes ACCEPTED
Accepted: cdrom-core-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/cdrom-core-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb cdrom-core-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/cdrom-core-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb crypto-modules-2.6.18-3-r4k-ip22-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-modules-2.6.18-3-r4k-ip22-di_0.8_mips.udeb crypto-modules-2.6.18-3-r5k-ip32-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-modules-2.6.18-3-r5k-ip32-di_0.8_mips.udeb crypto-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb crypto-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb fat-modules-2.6.18-3-qemu-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/fat-modules-2.6.18-3-qemu-di_0.8_mips.udeb fat-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/fat-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb fat-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/fat-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb fb-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/fb-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb fb-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/fb-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb ide-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ide-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb ide-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ide-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb input-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/input-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb input-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/input-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb ipv6-modules-2.6.18-3-r4k-ip22-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ipv6-modules-2.6.18-3-r4k-ip22-di_0.8_mips.udeb ipv6-modules-2.6.18-3-r5k-ip32-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ipv6-modules-2.6.18-3-r5k-ip32-di_0.8_mips.udeb ipv6-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ipv6-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb ipv6-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ipv6-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb jfs-modules-2.6.18-3-qemu-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/jfs-modules-2.6.18-3-qemu-di_0.8_mips.udeb jfs-modules-2.6.18-3-r4k-ip22-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/jfs-modules-2.6.18-3-r4k-ip22-di_0.8_mips.udeb jfs-modules-2.6.18-3-r5k-ip32-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/jfs-modules-2.6.18-3-r5k-ip32-di_0.8_mips.udeb jfs-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/jfs-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb jfs-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/jfs-modules-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb kernel-image-2.6.18-3-qemu-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/kernel-image-2.6.18-3-qemu-di_0.8_mips.udeb kernel-image-2.6.18-3-r4k-ip22-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/kernel-image-2.6.18-3-r4k-ip22-di_0.8_mips.udeb kernel-image-2.6.18-3-r5k-ip32-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/kernel-image-2.6.18-3-r5k-ip32-di_0.8_mips.udeb kernel-image-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/kernel-image-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb kernel-image-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/kernel-image-2.6.18-3-sb1a-bcm91480b-di_0.8_mips.udeb linux-kernel-di-mips-2.6_0.8.dsc to pool/main/l/linux-kernel-di-mips-2.6/linux-kernel-di-mips-2.6_0.8.dsc linux-kernel-di-mips-2.6_0.8.tar.gz to pool/main/l/linux-kernel-di-mips-2.6/linux-kernel-di-mips-2.6_0.8.tar.gz loop-modules-2.6.18-3-qemu-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/loop-modules-2.6.18-3-qemu-di_0.8_mips.udeb loop-modules-2.6.18-3-r4k-ip22-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/loop-modules-2.6.18-3-r4k-ip22-di_0.8_mips.udeb loop-modules-2.6.18-3-r5k-ip32-di_0.8_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/loop-modules-2.6.18-3-r5k-ip32-di_0.8_mips.udeb loop-modules-2.6.18-3-sb1-bcm91250a-di_0.8_mips.udeb to
Bug#400815: debian-installer: Can't skip to configure package manager after failed install base system after succeeded install base system
Package: debian-installer Severity: normal Hi, I tried a daily image and wanted to see what it'd do if I selected Install the base system twice. It gave a warning the second time, so I canceled. Then I selected Configure the package manager, but instead, it tried to install the base system again. It failed, but at the end it says the failed step is: Configure the package manager. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-2-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Bug#400579: Please apply this patch to DirectFB 0.9.25
Guillem Jover wrote: snip/ If not, would you mind waiting a few days still so that i can build an experimental iso, ask testers and, if everything is ok, send you the revised patch? Sure, I was planning to take the one from CVS, but if you can do testing and any additional fixing required that'd be great as well! ok, tomorrow i'll build a new iso containing ville's updated patch and ask users for a new round of tests looking for regressions and improvments. Since we may also need to patch DirectFB to fix the crash at VT switch on AMD64, waiting some days might save one directfb upload. cheers Attilio -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#400715: apt-setup: typo n'a pas acceder in French translation
Christian Perrier a écrit : Quoting Filipus Klutiero ([EMAIL PROTECTED]): trunk/packages/po/fr.po revision 42479 contains at line 6111 Le programme d'installation n'a pas accéder au miroir. There's a pu missing, so this should read Le programme d'installation n'a pas pu accéder au miroir. Hmmm, a pu de pu, quoi en résumé...:-) (non-french speakers, a pu de something is a common trivial way to just say there is no more something) Thanks, Philippe, for spotting that one...I'll correct it ASAP. I'm sorry but I make a mistake, the real sentence should be: Le programme d'installation n'a pas pu accéder au miroir. I'm French ;-) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#400715: apt-setup: typo n'a pas acceder in French translation
Christian Perrier a écrit : Quoting Filipus Klutiero ([EMAIL PROTECTED]): trunk/packages/po/fr.po revision 42479 contains at line 6111 Le programme d'installation n'a pas accéder au miroir. There's a pu missing, so this should read Le programme d'installation n'a pas pu accéder au miroir. Hmmm, a pu de pu, quoi en résumé...:-) (non-french speakers, a pu de something is a common trivial way to just say there is no more something) pu Thanks, Philippe, for spotting that one...I'll correct it ASAP. The real sentence in French should be : Le programme d'installation n'a /*pu*/ pas accéder au miroir. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#400815: debian-installer: Can't skip to configure package manager after failed install base system after succeeded install base system
On Tuesday 28 November 2006 22:28, Olaf van der Spek wrote: I tried a daily image and wanted to see what it'd do if I selected Install the base system twice. It gave a warning the second time, so I canceled. Then I selected Configure the package manager, but instead, it tried to install the base system again. It failed, but at the end it says the failed step is: Configure the package manager. That sounds about correct. You can recover by going back to partitioning. Make sure that you do install the base system again after that. The steps for setting up users/clock/timezone can be skipped. I agree that the installer could be more strict and clear in it's warnings, but that is definitely minor. Cheers, FJP pgpo3S3BtBpaQ.pgp Description: PGP signature
Bug#400837: installation-report: Sun Netra-X1 install configures dmfe driver rather than Tulip driver
Package: installation-reports Version: 2.23 Severity: important -- Package-specific info: Boot method: network Image version: http://people.debian.org/~stappers/d-i/images/daily/sparc64/netboot/2.6/boot.img build 27/Nov/2006 Date: Date and time of the install Machine: Sun Netra X1 Partitions: df -Tl will do; the raw partition table is preferred pingu:~# fdisk -l /dev/hda Disk /dev/hda (Sun disk label): 16 heads, 63 sectors, 39691 cylinders Units = cylinders of 1008 * 512 bytes Device FlagStart EndBlocks Id System /dev/hda1 0 9924999681 Boot ~/dev/hda2 992 20368 9765504 83 Linux native /dev/hda3 0 39693 200052725 Whole disk /dev/hda4 20368 22306976752 82 Linux swap /dev/hda5 22306 24290361 Boot /dev/hda6 24290 2627436 83 Linux native /dev/hda7 26274 32983 3381336 83 Linux native /dev/hda8 32983 39693 3381840 83 Linux native Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[E] Configure network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: The install went well apart from the loading of the wrong driver for the onboard network devices DM9102 devices. The installer said that it was loading the Tulip driver but also loaded the dmfe driver prior to it. The dmfe driver ate the devices and Tulip found nothing to probe. This is a problem because dmfe does not work with the onboard devices - it gives lots of PCI bus errors and does not actually transfer traffic. I was able to drop down to a shell and unload both dmfe and tulip with modprobe -r and then reload tulip only. At this stage the networks setup just fine. Note the same problem arose during the reboot after installation. FYI this machine/model is not capable of booting from a CD drive so it is vital that network devices get loaded properly during install. Here are a few bits of relevant output from the system. Devices being loaded... TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) eth0: Davicom DM9102 at pci:00:05.0, 00:00:00:00:00:00, irq 7418560. eth1: Davicom DM9102 at pci:00:0c.0, 00:00:00:00:00:00, irq 7417856. Linux Tulip driver version 1.1.13-NAPI (May 11, 2002) ohci_hcd :00:0a.0: OHCI Host Controller We get a similar thing in the output during the post install boot ALI15X3: 100% native mode on irq 5,7cc ide0: BM-DMA at 0x1fe02010220-0x1fe02010227, BIOS settings: hda:DMA, hdb:pioide1: BM-DMA at 0x1fe02010228-0x1fe0201022f, BIOS settings: hdc:pio, hdd:piodmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) hda: ST320423A, ATA DISK drive ide0 at 0x1fe02010200-0x1fe02010207,0x1fe0201020a on irq 5,7cc hdc: ST320423A, ATA DISK drive ide1 at 0x1fe02010210-0x1fe02010217,0x1fe0201020e on irq 5,7cc eth0: Davicom DM9102 at pci:00:05.0, 00:00:00:00:00:00, irq 7418560. eth1: Davicom DM9102 at pci:00:0c.0, 00:00:00:00:00:00, irq 7417856. Linux Tulip driver version 1.1.13-NAPI (May 11, 2002) hda: max request size: 128KiB -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=4.0 (installer build 20061127-12:05) X_INSTALLATION_MEDIUM=netboot-2.6 == Installer hardware-summary: == umame -a: Linux pingu 2.6.17-2-sparc64 #1 Wed Sep 13 10:39:24 PDT 2006 sparc64 unknown lspci -nn: 00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIe [108e:a001] lspci -nn: 00:03.0 Non-VGA unclassified device []: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101] lspci -nn: 00:05.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 31) lspci -nn: 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533] lspci -nn: 00:0a.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) lspci -nn: 00:0c.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 31) lspci -nn: 00:0d.0 IDE interface [0101]: ALi
Processing of tzsetup_0.14_i386.changes
tzsetup_0.14_i386.changes uploaded successfully to localhost along with the files: tzsetup_0.14.dsc tzsetup_0.14.tar.gz tzsetup-udeb_0.14_all.udeb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
tzsetup_0.14_i386.changes ACCEPTED
Accepted: tzsetup-udeb_0.14_all.udeb to pool/main/t/tzsetup/tzsetup-udeb_0.14_all.udeb tzsetup_0.14.dsc to pool/main/t/tzsetup/tzsetup_0.14.dsc tzsetup_0.14.tar.gz to pool/main/t/tzsetup/tzsetup_0.14.tar.gz Override entries for your package: tzsetup-udeb_0.14_all.udeb - standard debian-installer tzsetup_0.14.dsc - source misc Announcing to debian-devel-changes@lists.debian.org Thank you for your contribution to Debian. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#400766: user-setup: using (go back) leads to a system without root-password and without sudo
tags 400766 + pending thanks On Tuesday 28 November 2006 20:52, Joey Hess wrote: + if ! test $RET || [ $RET = ! ]; then This needs to be: + if ! test $RET || [ x$RET = x! ]; then Reason is that ! has special meaning in shell. Tried escaping it, but that did not work. This is the only syntax with which I could make it work. Committed. pgpGEdyMb9PaU.pgp Description: PGP signature
Bug#400833: installation-report: unclear keyboard use under installgui
On Wednesday 29 November 2006 00:30, Peter Klavins wrote: Comments/Problems: Initial boot: installgui usability It is not clear how to use the keyboard to select the triangles to open up the continent selection without using the mouse, e.g., select language english, then try to select Europe and Italy as the location using only the keyboard. You can open/close the sublists using + and - Clock/timezone setup: timezone incorrect While the setup operation strictly is correct, the resulting time is one hour too fast for the timezone GST +1 (Rome). This is probably a side-effect of running inside a virtual machine which is itself running on Windows Vista which is already adjusted for Rome time. Yes, sounds likely. The installer will have set up the system inside the VM to UTC as it is probably the only OS inside the VM. It's pretty hard to detect what a VM is running on :-P This is one usecase we have not reconned with. Just correct the UTC setting in /etc/default/rcS. Overall install: gui headings inconsistent During the GUI install the constantly updated detail lines are not reflected in the bold header, which sometimes changes, but other times seems to reflect the heading of the last section that required interactive user input. This is confusing because the bold font draws the eye to it, but on reading it you think there is something wrong because the heading sometimes doesn't correspond at all to the detail lines being installed. I guess you mean during installation of packages from tasks? If so, that is a known issue and the result of some packages still using an obsoleted command to set the title. Cheers, FJP -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: Re: Bug#400766: user-setup: using (go back) leads to a system without root-password and without sudo
Processing commands for [EMAIL PROTECTED]: tags 400766 + pending Bug#400766: user-setup: using (go back) leads to a system without root-password and without sudo Tags were: patch Tags added: pending thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Bug#400766: user-setup: using (go back) leads to a system without root-password and without sudo
On Tuesday 28 November 2006 20:52, Joey Hess wrote: First time through, these values are set. The second time through, it thinks these have been preseeded, so doesn't ask for a root password. Note that #388003 seems a somewhat related issue. Would be good to fix that as well. pgplCc1riCkBq.pgp Description: PGP signature
Processed: Re: Bug#394970: finish-install: [powerpc64] Add support for IBM serial consoles (hvc and hvsi)
Processing commands for [EMAIL PROTECTED]: tag 394970 + pending Bug#394970: finish-install: [powerpc64] Add support for IBM serial consoles (hvc and hvsi) Tags were: patch Tags added: pending End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
linux-kernel-di-m68k-2.6 help
I was wondering if someone can help me out. I started to update
linux-kernel-di-m68k-2.6 to 2.6.18 and I ran into the following error. I
suppose something changed since I last did this, any ideas?
Thanks,
Stephen
$ kernel-wedge build-all
| dpkg-buildpackage: source package is linux-kernel-di-m68k-2.6
| dpkg-buildpackage: source version is 0.79
| dpkg-buildpackage: source changed by Stephen R. Marenka [EMAIL PROTECTED]
| dpkg-buildpackage: source version without epoch 0.79
| fakeroot debian/rules clean
| kernel-wedge gen-control debian/control
| dh_testdir
| dh_clean `find modules -type l`
| dpkg-source -ICVS -I.svn -I{arch} -I.arch-ids -b linux-kernel-di-m68k-2.6
| dpkg-source: error: per-package paragraph 1 in control info file is missing
Package line
--
Stephen R. Marenka If life's not fun, you're not doing it right!
[EMAIL PROTECTED]
signature.asc
Description: Digital signature
Processing of linux-kernel-di-hppa-2.6_1.13_hppa.changes
linux-kernel-di-hppa-2.6_1.13_hppa.changes uploaded successfully to localhost along with the files: linux-kernel-di-hppa-2.6_1.13.dsc linux-kernel-di-hppa-2.6_1.13.tar.gz kernel-image-2.6.18-3-parisc-di_1.13_hppa.udeb nic-modules-2.6.18-3-parisc-di_1.13_hppa.udeb ppp-modules-2.6.18-3-parisc-di_1.13_hppa.udeb ide-modules-2.6.18-3-parisc-di_1.13_hppa.udeb cdrom-core-modules-2.6.18-3-parisc-di_1.13_hppa.udeb scsi-modules-2.6.18-3-parisc-di_1.13_hppa.udeb loop-modules-2.6.18-3-parisc-di_1.13_hppa.udeb ipv6-modules-2.6.18-3-parisc-di_1.13_hppa.udeb ext3-modules-2.6.18-3-parisc-di_1.13_hppa.udeb xfs-modules-2.6.18-3-parisc-di_1.13_hppa.udeb md-modules-2.6.18-3-parisc-di_1.13_hppa.udeb usb-modules-2.6.18-3-parisc-di_1.13_hppa.udeb usb-storage-modules-2.6.18-3-parisc-di_1.13_hppa.udeb input-modules-2.6.18-3-parisc-di_1.13_hppa.udeb crypto-modules-2.6.18-3-parisc-di_1.13_hppa.udeb kernel-image-2.6.18-3-parisc64-di_1.13_hppa.udeb nic-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb ppp-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb ide-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb cdrom-core-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb scsi-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb loop-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb ipv6-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb ext3-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb xfs-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb md-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb usb-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb usb-storage-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb input-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb crypto-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Corrupt dpkg database? No kernels found
Martin Michlmayr tbm at cyrius.com writes: I just got an error during the installation because no kernel was found. syslog complained about missing dependencies and advised that apt-get -f install should be run. I entered the target and issues that command but apt-get segfaulted. After manually installing a .deb with dpkg, apt-get worked fine... this seems like a corrupted dpkg database to me. Has anyone seen this before? It sounds similar to something someone recently mentioned on -mips. I'm on ARM and several test installations in the last few days worked fine. Logs: Nov 26 10:31:21 apt-install: Reading package lists... Nov 26 10:31:21 apt-install: Nov 26 10:31:21 apt-install: Building dependency tree... Nov 26 10:31:33 apt-install: Nov 26 10:31:33 apt-install: You might want to run `apt-get -f install' to correct these: Nov 26 10:31:33 apt-install: The following packages have unmet dependencies: Nov 26 10:31:33 apt-install: base-files: Depends: awk Nov 26 10:31:33 apt-install: netbase: Depends: openbsd-inetd but it is not installable or Nov 26 10:31:33 apt-install: inet-superserver Nov 26 10:31:35 base-installer: info: Found kernels '' The daily build of the installer dated 27-Nov-2006 fails in a similar way for me, execpt that it is initramfs-tools as opposed to base-file that has unmet dependencies. Nov 29 02:32:35 apt-install: Nov 29 02:32:35 apt-install: You might want to run `apt-get -f install' to correct these: Nov 29 02:32:35 apt-install: The following packages have unmet dependencies: Nov 29 02:32:35 apt-install: initramfs-tools: Depends: klibc-utils (= 1.4.19-2) but it is not going to be installed Nov 29 02:32:35 apt-install:Depends: busybox (= 1:1.01-3) but it is not going to be installed or Nov 29 02:32:35 apt-install: busybox-cvs-static (= 20040623-1) but it is not installable Nov 29 02:32:35 apt-install:Depends: udev (= 0.086-1) but it is not going to be installed Nov 29 02:32:35 apt-install: libtext-charwidth-perl: Depends: perlapi-5.8.8 but it is not installable Nov 29 02:32:35 apt-install: libtext-iconv-perl: Depends: perlapi-5.8.8 but it is not installable Nov 29 02:32:35 base-installer: error: exiting on error base-installer/kernel/failed-package-install ~ # chroot /target/ sh-3.1# mount -t proc none /proc sh-3.1# apt-get -f install Reading package lists... Done Building dependency tree... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Gordon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
linux-kernel-di-hppa-2.6_1.13_hppa.changes is NEW
(new) cdrom-core-modules-2.6.18-3-parisc-di_1.13_hppa.udeb standard debian-installer CDROM support This package contains core CDROM support for the Linux kernel. (new) cdrom-core-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb standard debian-installer CDROM support This package contains core CDROM support for the Linux kernel. (new) crypto-modules-2.6.18-3-parisc-di_1.13_hppa.udeb extra debian-installer crypto modules This package contains crypto modules. (new) crypto-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb extra debian-installer crypto modules This package contains crypto modules. (new) ext3-modules-2.6.18-3-parisc-di_1.13_hppa.udeb standard debian-installer EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. (new) ext3-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb standard debian-installer EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. (new) ide-modules-2.6.18-3-parisc-di_1.13_hppa.udeb standard debian-installer IDE drivers This package contains IDE drivers for the Linux kernel. (new) ide-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb standard debian-installer IDE drivers This package contains IDE drivers for the Linux kernel. (new) input-modules-2.6.18-3-parisc-di_1.13_hppa.udeb extra debian-installer Input devices support This package contains input device drivers for the Linux kernel. (new) input-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb extra debian-installer Input devices support This package contains input device drivers for the Linux kernel. (new) ipv6-modules-2.6.18-3-parisc-di_1.13_hppa.udeb extra debian-installer IPv6 driver This package contains the IPv6 driver for the Linux kernel. (new) ipv6-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb extra debian-installer IPv6 driver This package contains the IPv6 driver for the Linux kernel. (new) kernel-image-2.6.18-3-parisc-di_1.13_hppa.udeb extra debian-installer Linux kernel binary image for the Debian installer This package contains the Linux kernel image for the Debian installer boot images. It does _not_ provide a usable kernel for your full Debian system. (new) kernel-image-2.6.18-3-parisc64-di_1.13_hppa.udeb extra debian-installer Linux kernel binary image for the Debian installer This package contains the Linux kernel image for the Debian installer boot images. It does _not_ provide a usable kernel for your full Debian system. linux-kernel-di-hppa-2.6_1.13.dsc to pool/main/l/linux-kernel-di-hppa-2.6/linux-kernel-di-hppa-2.6_1.13.dsc linux-kernel-di-hppa-2.6_1.13.tar.gz to pool/main/l/linux-kernel-di-hppa-2.6/linux-kernel-di-hppa-2.6_1.13.tar.gz (new) loop-modules-2.6.18-3-parisc-di_1.13_hppa.udeb standard debian-installer Loopback filesystem support This package contains loopback filesystem support for the Linux kernel. (new) loop-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb standard debian-installer Loopback filesystem support This package contains loopback filesystem support for the Linux kernel. (new) md-modules-2.6.18-3-parisc-di_1.13_hppa.udeb extra debian-installer RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. (new) md-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb extra debian-installer RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. (new) nic-modules-2.6.18-3-parisc-di_1.13_hppa.udeb standard debian-installer Common NIC drivers This package contains common NIC drivers for the Linux kernel. (new) nic-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb standard debian-installer Common NIC drivers This package contains common NIC drivers for the Linux kernel. (new) ppp-modules-2.6.18-3-parisc-di_1.13_hppa.udeb optional debian-installer PPP drivers This package contains PPP drivers for the Linux kernel. (new) ppp-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb optional debian-installer PPP drivers This package contains PPP drivers for the Linux kernel. (new) scsi-modules-2.6.18-3-parisc-di_1.13_hppa.udeb standard debian-installer SCSI drivers This package contains SCSI drivers for the Linux kernel. (new) scsi-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb standard debian-installer SCSI drivers This package contains SCSI drivers for the Linux kernel. (new) usb-modules-2.6.18-3-parisc-di_1.13_hppa.udeb extra debian-installer USB support This package contains core USB drivers for the Linux kernel. (new) usb-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb extra debian-installer USB support This package contains core USB drivers for the Linux kernel. (new) usb-storage-modules-2.6.18-3-parisc-di_1.13_hppa.udeb standard debian-installer USB storage support This package contains the USB storage driver for the Linux kernel. (new) usb-storage-modules-2.6.18-3-parisc64-di_1.13_hppa.udeb standard debian-installer USB storage support This package contains the USB storage driver for the Linux kernel. (new) xfs-modules-2.6.18-3-parisc-di_1.13_hppa.udeb standard
Returned mail: Data format error
The original message was received at Wed, 29 Nov 2006 08:33:03 +0200 from internal.schools.net.au [25.195.7.235] - The following addresses had permanent fatal errors - debian-boot@lists.debian.org - Transcript of the session follows - ... while talking to server lists.debian.org.: MAIL From:[EMAIL PROTECTED] 500 Domain blacklisted
Re: Bug#400766: user-setup: using (go back) leads to a system without root-password and without sudo
Quoting Frans Pop ([EMAIL PROTECTED]): On Tuesday 28 November 2006 20:52, Joey Hess wrote: First time through, these values are set. The second time through, it thinks these have been preseeded, so doesn't ask for a root password. Note that #388003 seems a somewhat related issue. Would be good to fix that as well. Hmm, you guys are too fast...:) I just saw this #400766 yesterday and was consdering to have a look at it but it seems that Joey has been considerably faster. Congrats -- signature.asc Description: Digital signature
Bug#400837: Sun Netra-X1 install configures dmfe driver rather than Tulip driver
Hi Richard, Thanks for your report. Unfortunately, this issue is pretty well known (check out the bug 334104, for example), and so far we have failed to come up with a decent solution to it. The problem is that both dmfe and tulip cards advertise support for this particular PCI id. The sad part is that there are some cards out there, having the same PCI id, but requiring different drivers to work! So far I could not come up with anything better than patching both modules to introduce a parameter which can be used to prevent them from initializing any devices. Unfortunately, it will still be up to user to recognize that the problem comes from tulip/dmfe driver conflict, and disable the faulty one. Best regards, -- Jurij Smakov [EMAIL PROTECTED] Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [g-i] new screenshots available (dejavu 2.12)
On 11/29/06, Davide Viti [EMAIL PROTECTED] wrote: I took some screenshots using latest dejavu 2.12; please refer to [1] to see what changed since version 2.11. Note that Hebrew is now using glyphs from Dejavu rather than from Freefont (see [2]) The screenshots can be found in [3], and in case you wanted to compare them to those taken using the previous version, see [4] feedback is very welcome Bengali [bn] looks ok. Just need to increase the font size. ;) Regards, `Jamil -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#400815: debian-installer: Can't skip to configure package manager after failed install base system after succeeded install base system
Frans Pop wrote: On Tuesday 28 November 2006 22:28, Olaf van der Spek wrote: I tried a daily image and wanted to see what it'd do if I selected Install the base system twice. It gave a warning the second time, so I canceled. Then I selected Configure the package manager, but instead, it tried to install the base system again. It failed, but at the end it says the failed step is: Configure the package manager. That sounds about correct. You can recover by going back to partitioning. But why? I canceled the second Install the base system before it touched my system, so there shouldn't be a reason to do it again. Make sure that you do install the base system again after that. The steps for setting up users/clock/timezone can be skipped. I agree that the installer could be more strict and clear in it's warnings, but that is definitely minor. Cheers, FJP -- Olaf van der Spek http://xccu.sf.net/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
