Bug#385785: installation failure
On Sunday 03 September 2006 04:48, [EMAIL PROTECTED] wrote: Comments/Problems: Burned .iso with Nero 6 in Win2000; Nero reported CD was ok after verification stage. I used boot parameter to force static IP. NIC was not detected (SMC 1211TX = RTL8139). That is expected as the NIC can only be configured after additional components have been loaded from the CD. Installer reported CD files could not be loaded. Seems you have two CD drives. Did you try switching the CD to the other drive? What was the exact error? Please also check, after switching to VT2, the output of 'dmesg' and the contents of /var/log/syslog (using nano as editor). -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#385785: installation failure
On Sun, Sep 03, 2006 at 01:37:22PM -0400, [EMAIL PROTECTED] wrote: On Sun, 3 Sep 2006 08:39:36 +0200, Christian Perrier Can you run (lspci ; lspci -n)|sort on that machine Then send us the output relevant to your NIC and the interface your CD is attached on. [ I don't understand the request, I don't dare to ask what (lspci ; lspci -n)| sort -n means. I just do lspci lspci -n and see want happens. I even don't care to filter the relevant parts ] That is what I did read. This is more what was expected: :00:07.1 0101: 8086:7111 (rev 01) :00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) :00:0d.0 0100: 9004:8178 :00:0d.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U :00:12.0 0180: 1095:3112 (rev 02) :00:12.0 Unknown mass storage controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA :00:14.0 0200: 1113:1211 (rev 10) :00:14.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10) Question: the interface your CD is attached on. Geert Stappers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#385785: installation failure
Comments/Problems: Burned .iso with Nero 6 in Win2000; Nero reported CD was ok after verification stage. I used boot parameter to force static IP. NIC was not detected (SMC 1211TX = RTL8139). Installer reported CD files could not be loaded. Installation attempt aborted. What interface does your CD drive use? Can you provide us with relevant log parts from console 4? Can you run (lspci ; lspci -n)|sort on that machine (maybe with another Linux Live CD or directly from the installer console 2) ? Then send us the output relevant to your NIC and the interface your CD is attached on. Please respect Reply-To signature.asc Description: Digital signature
Bug#385785: installation failure
On Sun, 3 Sep 2006 08:39:36 +0200, Christian Perrier What interface does your CD drive use? The IDE controller on the motherboard. /dev/hda: Pioneer DVD-120 (boot device) /dev/hdb: Sony CRX-230ED /dev/hdc: Nothing /dev/hdd: Nothing Can you run (lspci ; lspci -n)|sort on that machine (maybe with another Linux Live CD or directly from the installer console 2) ? Then send us the output relevant to your NIC and the interface your CD is attached on. Linux Knoppix 2.6.11 #8 SMP Sun Mar 20 21:09:51 CET 2005 i686 GNU/Linux :00:00.0 Host bridge: Intel Corp. 440GX - 82443GX Host bridge :00:01.0 PCI bridge: Intel Corp. 440GX - 82443GX AGP bridge :00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) :00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) :00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) :00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) :00:0d.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U :00:0f.0 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev 50) :00:0f.1 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev 50) :00:0f.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) :00:10.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01) :00:12.0 Unknown mass storage controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02) :00:14.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10) :01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01) :01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon 9000] (Secondary) (rev 01) :00:00.0 0600: 8086:71a0 :00:01.0 0604: 8086:71a1 :00:07.0 0601: 8086:7110 (rev 02) :00:07.1 0101: 8086:7111 (rev 01) :00:07.2 0c03: 8086:7112 (rev 01) :00:07.3 0680: 8086:7113 (rev 02) :00:0d.0 0100: 9004:8178 :00:0f.0 0c03: 1106:3038 (rev 50) :00:0f.1 0c03: 1106:3038 (rev 50) :00:0f.2 0c03: 1106:3104 (rev 51) :00:10.0 0401: 1013:6003 (rev 01) :00:12.0 0180: 1095:3112 (rev 02) :00:14.0 0200: 1113:1211 (rev 10) :01:00.0 0300: 1002:4966 (rev 01) :01:00.1 0380: 1002:496e (rev 01) -- [EMAIL PROTECTED] -- http://www.fastmail.fm - And now for something completely different
Bug#385785: installation failure
Package: installation-reports Boot method: CD, from http://cdimage.debian.org/cdimage/etch_di_beta3/i386/iso-cd/debian-testing-i386-netinst.iso Image version: 2006/09/02, 1800UTC Date: 2006/09/02, 1900UTC Machine: Supermicro P6DGE motherboard Processor: Dual P3 600/100/512K/2.05V Memory: 512MB (2*256) PC100 Partitions: df -Tl will do; the raw partition table is preferred Output of lspci and lspci -n: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[O] Configure network HW: [E] Config network: [ ] Detect CD: [O] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems:[ ] Mount partitions: [ ] Install base system:[ ] Install boot loader:[ ] Reboot: [ ] Comments/Problems: Burned .iso with Nero 6 in Win2000; Nero reported CD was ok after verification stage. I used boot parameter to force static IP. NIC was not detected (SMC 1211TX = RTL8139). Installer reported CD files could not be loaded. Installation attempt aborted. -- [EMAIL PROTECTED] -- http://www.fastmail.fm - The way an email service should be -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
