Package: installation-reports
Version: 2.51
Severity: normal
Dear Maintainer,
during expert install partman does not start due to a syntax error on
/lib/partman/lib/zfs-base.sh at line 65;
at that line a round bracket is missing: after adding it, partman starts and
installation completes successfully.
-- Package-specific info:
Boot method: Netinst CD
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso
Build date: 20 Aug 2013
Date: 20 Aug 2013
Machine: Intel i7 processor based system
Partitions: df -Tl will do; the raw partition table is preferred
File systemTipo 1K-blocks Usati Disponib. Uso% Montato su
/dev/sda6 ext4 9480420 980736 7995060 11% /
udev devtmpfs 10240 0 10240 0% /dev
tmpfs tmpfs 612136308611828 1% /run
tmpfs tmpfs 5120 0 5120 0% /run/lock
tmpfs tmpfs 3568140 0 3568140 0% /run/shm
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card:[O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Clock/timezone setup: [O]
User/password setup:[O]
Detect hard drives: [O]
Partition hard drives: [E]
Install base system:[O]
Install tasks: [O]
Install boot loader:[O]
Overall install:[O]
Comments/Problems:
It is necessary to add a round bracket at line 65 of
/lib/partman/lib/zfs-base.sh in the partman-zfs_26_amd64.udeb
package.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to sub...@bugs.debian.org.
==
Installer lsb-release:
==
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION=Debian GNU/Linux installer
DISTRIB_RELEASE=8 (jessie) - installer build 20130820-00:05
X_INSTALLATION_MEDIUM=cdrom
==
Installer hardware-summary:
==
uname -a: Linux (none) 3.10-2-amd64 #1 SMP Debian 3.10.7-1 (2013-08-17) x86_64
GNU/Linux
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub
to ESI Port [8086:3405] (rev 12)
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:836b]
lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub
PCI Express Root Port 1 [8086:3408] (rev 12)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub
PCI Express Root Port 3 [8086:340a] (rev 12)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub
PCI Express Root Port 7 [8086:340e] (rev 12)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:10.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Physical
and Link Layer Registers Port 0 [8086:3425] (rev 12)
lspci -knn: 00:10.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Routing
and Protocol Layer Registers Port 0 [8086:3426] (rev 12)
lspci -knn: 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub
System Management Registers [8086:342e] (rev 12)
lspci -knn: 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub
GPIO and Scratch Pad Registers [8086:3422] (rev 12)
lspci -knn: 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub
Control Status and RAS Registers [8086:3423] (rev 12)
lspci -knn: 00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub
Throttle Registers [8086:3438] (rev 12)
lspci -knn: 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB UHCI Controller #4 [8086:3a37]
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB UHCI Controller #5 [8086:3a38]
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB UHCI Controller #6 [8086:3a39]
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB2 EHCI Controller #2 [8086:3a3c]
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
lspci -knn: Kernel driver in use: ehci-pci
lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10
Family) HD Audio Controller [8086:3a3e]
lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:8357]
lspci -knn: 00:1c.0
