Bug#429564: xmltex: unmet Recommends on passivetex
Luk Claes [EMAIL PROTECTED] wrote: Package: xmltex Severity: important Version: 1.9-12 User: [EMAIL PROTECTED] Usertags: goal-recommends Hi Your package recommends passivetex which is not available in unstable anymore. This will be solved by merging xmltex and jadetex into a texlive package (from collection-htmlxml) which will also provide passivetex. Regards, Frank -- Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#429548: Broken text/plain alternatives to text/html messages (notably from hotmail) end up in the void and breaks BTS database
On Mon, Jun 18, 2007 at 02:14:17PM -0700, Don Armstrong [EMAIL PROTECTED] wrote: Maybe pre-filtering hotmail messages could be a solution. You could take the text/html alternative and dump it with lynx, for example... I really, really don't want to special case around broken MUAs. I'm far more likely to block them entirely than do that. Far better to just have them use reportbug... or complain to hotmail for sending totally broken text/plain. Well, at least, something should be done to avoid the corruption of the BTS. Like not assigning bugs to packages that don't exist... Mike -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429616: kview: Kview segfaults on logout
Package: kview Severity: normal When I logout of KDE without closing kview, kview segfaults and the KDE crash handler appears. This is annoying, as the logout does not complete until this crash handler window is manually closed. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.21v1 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#419780: ethernet network interface device in wrong place
On Tue, 19 Jun 2007, Geert Stappers wrote: Op 18-06-2007 om 16:17 schreef Faheem Mitha: Hi, Just to shed a little more light on this problem. I just did some more work on the laptop in question. I ignored the ethernet detection card problem and proceeded to configure the wireless card (Intel ipw3945 card). This seems to correspond to eth0, which is not conventional. I haven't tried to get the ethernet card to work, but my guess is that it corresponds to eth1. Not sure if this information is significant or not. This reply is way to short, it only says See the file /etc/udev/rules.d/z25_persistent-net.rules Sorry, I don't follow what you are trying to say. Thanks. Faheem. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#399183: [SPAM] - Re: Bug#399183: xserver-xorg: incorrectly calculates TrueTypefontmetrics - Bayesian Filter detected spam
On 6/18/07, Drew Parsons [EMAIL PROTECTED] wrote: Thanks for that, I'm looking at dejavu now using xfontsel as well as xfd and gfontview. Moreover I can't see any difference between iso8859-1 and iso10646-1. In both cases the ascents and descents vary between letters. I've attached two screenshots of Dejavu font in xdf window. Firstly, the window size is different for encoding iso8859-1 and iso10646-1 (it may indicate that font metrics differ). Moreover, I selected 'hyphen char' in both windows and you can see that its dimensions is not the same in iso8859-1 (width 6; left 1; right 5; accent 6; descent -4) and iso 10646-1 (width 6; left 1; right 6; accent 18; descent 6). The latter metrics look awful. I double checked they were indeed different between characters using xmag. Can you explain in more detail precisely how you're perceiving the problem? Some screenshots might help. Another two screenshots contain text samples made by Dejavu and Arial fonts. The upper sample is produced using 8-bit font encoding (iso8859-1 for dejavu and koi8-r for arial - it contains some cyrillic). The problem is that the samples look differently, which is unacceptable in my view. I've also attached magnified samples for which the differences are highlighted by thing red strokes. Could you also tell us which versions you now have installed, including xserver-xorg 1:7.1.0-16 xserver-xorg-core 2:1.1.1-21 xbase-clients 1:7.1.ds1-2 libxfont1 1:1.2.2-2 ttf-dejavu 2.15-1 (but I don't think that the bug is in font packages) and which kernel and architecture you have (uname -srvo), and the Linux 2.6.18-4-686 #1 SMP Wed May 9 23:03:12 UTC 2007 GNU/Linux versions of any other packages you think might be relevant to the bug? I have no idea about other packages (I'm not an X expert). Thanks! -- Sergei Golovan attachment: dejavu-iso8859-1.pngattachment: dejavu-iso10646-1.pngattachment: dejavu-sample.pngattachment: dejavu-sample-x5.pngattachment: arial-sample.pngattachment: arial-sample-x5.png
Bug#419780: ethernet network interface device in wrong place
Op 18-06-2007 om 16:17 schreef Faheem Mitha: Hi, Just to shed a little more light on this problem. I just did some more work on the laptop in question. I ignored the ethernet detection card problem and proceeded to configure the wireless card (Intel ipw3945 card). This seems to correspond to eth0, which is not conventional. I haven't tried to get the ethernet card to work, but my guess is that it corresponds to eth1. Not sure if this information is significant or not. This reply is way to short, it only says See the file /etc/udev/rules.d/z25_persistent-net.rules HtH GSt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429618: ITP: xcalib -- Tiny monitor calibration loader for Xorg
Package: wnpp Severity: wishlist Owner: Jorge Salamero Sanz [EMAIL PROTECTED] X-Debbugs-CC: [EMAIL PROTECTED] * Package name: xcalib Version : 0.6 Upstream Author : Stefan Döhla stefan AT doehla DOT de * URL : http://www.etg.e-technik.uni-erlangen.de/web/doe/xcalib/ * License : GPL Programming Lang: C Description : Tiny monitor calibration loader for Xorg A tiny monitor calibration loader for Xorg. It loads 'vcgt'-tag of ICC profiles to the X-server to calibrate your display. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.21.5-mactel (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash
Bug#429617: installation failes
Package: exim4-config Version: 4.67-3 Severity: serious --- Please enter the report below this line. --- i just tried to install exim4 and it did not work: Setting up exim4-config (4.67-3) ... dpkg: error processing exim4-config (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: exim4-config E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up exim4-config (4.67-3) ... dpkg: error processing exim4-config (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: exim4-config after that the installation of the rest of exim4 failes too. --- System information. --- Architecture: amd64 Kernel: Linux 2.6.21.5 Debian Release: lenny/sid 990 unstablewww.debian-multimedia.org 990 unstableftp2.de.debian.org 990 unstableftp.debian-unofficial.org 500 testing ftp2.de.debian.org 500 experimentalwww.debian-multimedia.org 1 experimentalftp2.de.debian.org --- Package information. --- Depends (Version) | Installed ==-+-=== debconf (= 0.5) | 1.5.13 OR debconf-2.0| adduser| 3.102 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429466: gwenview crashed on menu entering
19, июня, 2007, Achim Bohnet написал: On June 18, 2007 05:39:48 Paul Romanchenko wrote: [...] Versions of packages gwenview recommends: ii kdegraphics-kfile-plugins 4:3.5.7-2 KDE metainfo plugins for graphic f ii kipi-plugins 0.1.3-4image manipulation/handling plugin kipi-plugins 0.1.3-4 is linked against libexiv2-0.12 with is incompatible to libexiv2-0 used by gwenview. Please upgrade kipi-plugins to 0.1.3-5. Yes, thank you! Problem gone, all works fine. Bug may be closed now. Btw, is it worth to update dependecies? -- :wq Paul S. Romanchenko (rmrfchik) signature.asc Description: This is a digitally signed message part.
Bug#374792: Stuck with patching of testing
This issue is putting me in a position where I am unable to keep my system up-to-date on testing, because libc is now dependent on a 2.6 kernel (and pretty much every newly released package now depends on that libc). Could someone tell me - which is the last released 2.6 kernel that had proper support for this controller, and whether there are any major problems/incompatibilities with that kernel that I should be aware of? If there is one, then I can at least install and pin it to continue normal system updates. - if I patch the current megaraid.c driver to recognize the controller's PCI IDs, are there any problems I can expect? I noticed that such a change was in the -mm series for a while, but google couldn't tell me why it was taken out. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#419780: ethernet network interface device in wrong place
Op 19-06-2007 om 02:25 schreef Faheem Mitha: On Tue, 19 Jun 2007, Geert Stappers wrote: Op 18-06-2007 om 16:17 schreef Faheem Mitha: Hi, snip what=eth0 is wireless, but eth0 should be the wired one/ See the file /etc/udev/rules.d/z25_persistent-net.rules Sorry, I don't follow what you are trying to say. do cat /etc/udev/rules.d/z25_persistent-net.rules cp /etc/udev/rules.d/z25_persistent-net.rules /root/netdevicedefinition.backup next $EDITOR /etc/udev/rules.d/z25_persistent-net.rules and swap eth0 and eth1 save the modified rules file reboot eth0 should now be the wired one Hope this helps Cheers Geert Stappers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#423098: patch not in recent version
Hello, Euh, the (applied) patch is not visible in version 0.5.2. Hope this helps Geert Stappers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429620: exim4-config: malformed macro definition
Package: exim4-config Version: 4.67-1 Severity: normal This adds to bug report #429617: installation failes I have the same error. Exim configuration error in line 28 of /var/lib/exim4/config.autogenerated.tmp: malformed macro definition. For your information: Lines 27 - 29 of /var/lib/exim4/config.autogenerated.tmp read: .ifndef DC_minimaldns DEBCONFminimaldnsDEBCONF .endif In the previous version, these lines in /var/lib/exim4/config.autogenerated are: .ifndef DC_minimaldns DC_minimaldns = 1 .endif Regards Gijs -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429619: openssh-server upgrade kills ability to login using password
Package: openssh-server Version: 1:4.6p1-1 Upgraded openssh-server from 1:4.3p2-10 openssh-server installed new version of /etc/init.d/ssh openssh-client upgraded at same time , installing new version of /etc/ ssh/ssh_config Problem is, I upgraded kernel at same time, so did a reboot. Now, when I try to login to the server (from an OSX machine) using password, I get Permission denied (publickey). Can't get to the server anymore. What changed between 1:4.3p2-10 and 1:4.6p1-1 that broke password based login? Here's the tail end of ssh -vvv [EMAIL PROTECTED] x debug1: Found key in /root/.ssh/known_hosts:8 debug2: bits set: 505/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/identity ((nil)) debug2: key: /root/.ssh/id_rsa ((nil)) debug2: key: /root/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug3: no such identity: /root/.ssh/identity debug1: Trying private key: /root/.ssh/id_rsa debug3: no such identity: /root/.ssh/id_rsa debug1: Trying private key: /root/.ssh/id_dsa debug3: no such identity: /root/.ssh/id_dsa debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey). xxx -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#428784: opustex: wrong dependencies for etch
Frank Küster a écrit : severity 428784 important Elie Roux [EMAIL PROTECTED] wrote: Package: opustex Version: 0.84-5.1 Severity: grave Justification: renders package unusable opustex depends on tetex-bin and tetex-extra, but texlive is used since etch. First of all, etch has both teTeX and TeXlive, so there is no problem in stable. In unstable, teTeX has dissappeared, and the tetex-* packages are only transitional packages for at users. They are not meant for other packages to depend on, and they do not guarantee any defined functionality in the technical (Depends:) sense. Therefore there is actually a bug in opustex, but I think it's only important. Elie, which problems did you encounter which would make the package unusable? I have a default etch installation, and aptitude refuses to install opustex, as I have not the tetex packages it depends on... Why is the old version still used instead of the latest (which is very old too)? Does the licence allow to patch OpusTeX? No, it is nonfree and may not be changed - what was your intention? Someone has given me some patches to improve OpusTeX a lot... but I don't think they can be used... Maybe we should discuss whether OpusTeX should better be dropped from Debian: - it claims to be a beta version and has not seen any upstream development in the last nine years. And the developer does not answer mails, and doesn't want to make his work free... - there are other macro packages to typeset music with TeX available in Debian (musictex and musixtex in texlive-music) as well as frontends which are able to use TeX (lilypond). You're right, but OpusTeX is mostly used to typeset gregorian chant, fot which it is really the best macro package, even if it has a lot of defaults. - there are more macro packages to typeset music with TeX which are not yet available in Debian, but will probably be included in future versions of texlive (at least those which are free). I'm building my own gregorian chant TeX package (for Omega in fact...), but it is not finished yet (http://home.gna.org/gregorio/), I hope it will be finished in september. - it is nonfree - according to popcon, it has 26 installations which gives it rank 20849, which is already in the area where about 50% of the packages are not in sid, i.e. obsolete, and it has 8 votes (i.e. 8 users who participate in popcon have actually used it) - Anthony hasn't been very active as a maintainer I think OpusTeX should not be dropped now from Debian, it would be better to wait for another gregorian chant typesetting system (Lilypond and MusiXTeX are really bad for gregorian chant). Regards, -- Elie
Bug#429622: AMD/ATI SB700 support to Debian
Package: kernel Version: older than 2.6.22 We have four patches for AMD/ATI SB700, and we will full support SB700 until 2.6.23-rc1. The four patches have been accepted by kernel org and the applied kernel version are listed as following: 1.SMBus device ID 2.6.23-rc1 2.IDE device ID 2.6.22 3.SATA device ID2.6.22 4.Combined mode 2.6.22 Because the patch for SMBus device ID is sent after the merge window for 2.6.22, and as a result it is queued for the next kernel version: 2.6.23. it will be merged in Linus' tree between 2.6.22 (final) and 2.6.23-rc1. My request here is: Which kernel version will be adopted in the next Debian(4.1?) release? If it will use the linux kernel AFTER 2.6.22, then that's good and please discard the rest part of this mail. Otherwise if it use the kernel older than 2.6.22, please apply the attached four patches into it manually. Thanks Best Regards Shane SMBus.patch Description: SMBus.patch combinedmode.patch Description: combinedmode.patch ide.patch Description: ide.patch sata.patch Description: sata.patch
Bug#429617: installation failes
reassign #429617 exim4-config retitle #429617 exim4-config installation fails (postinst exit status 1) On Tue, Jun 19, 2007 at 08:05:31AM +0200, Martin Ketzer wrote: --- Please enter the report below this line. --- i just tried to install exim4 and it did not work: Setting up exim4-config (4.67-3) ... dpkg: error processing exim4-config (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: exim4-config E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up exim4-config (4.67-3) ... dpkg: error processing exim4-config (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: exim4-config after that the installation of the rest of exim4 failes too. Please retry with EX4DEBUG set to 1 and submit the output. Please also submit your /etc/exim4/update-exim4.conf.conf (which should have been included with the original report). Greetings Marc -- - Marc Haber | I don't trust Computers. They | Mailadresse im Header Mannheim, Germany | lose things.Winona Ryder | Fon: *49 621 72739834 Nordisch by Nature | How to make an American Quilt | Fax: *49 621 72739835 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#399183: [SPAM] - Re: Bug#399183: xserver-xorg: incorrectly calculates TrueTypefontmetrics - Bayesian Filter detected spam
Thanks for the screenshots, Sergei. On Tue, 2007-06-19 at 10:13 +0400, Sergei Golovan wrote: I've attached two screenshots of Dejavu font in xdf window. Firstly, the window size is different for encoding iso8859-1 and iso10646-1 (it may indicate that font metrics differ). Moreover, I selected 'hyphen char' in both windows and you can see that its dimensions is not the same in iso8859-1 (width 6; left 1; right 5; accent 6; descent -4) and iso 10646-1 (width 6; left 1; right 6; accent 18; descent 6). The latter metrics look awful. OK, I can reproduce that the xfd boxes on both cases have different sizes, even though the characters inside them look the same. Could you also tell us which versions you now have installed, including xserver-xorg 1:7.1.0-16 ... OK, you're using the stable etch versions. One possibility is that the matter got addressed and fixed in the following versions that we're now testing in unstable. I've reproduced the xfd box size difference, but let's try for reproduction of the latin sample difference. Another two screenshots contain text samples made by Dejavu and Arial fonts. The upper sample is produced using 8-bit font encoding (iso8859-1 for dejavu and koi8-r for arial - it contains some cyrillic). The problem is that the samples look differently, which is unacceptable in my view. I've also attached magnified samples for which the differences are highlighted by thing red strokes. OK, that illustrates the problem well. Let's focus on reproducing the dejavu sample difference you've shown here. Can you describe precisely how you generated these dejavu samples? Alternatively, I can generate text samples from gfontview using both gfontview and LANG=en_AU gfontview (my default locale is UTF-8, so I expect the former to be using the iso10646-1 version of the font, while the latter should be using iso8859-1. ). I select the dejavu font, enter some string In girum consum into the Test String then click 'Make String'. I can magnify the resulting sample using xmag. In my case the horizontal spacing appears to be the same. It might be useful if you could try this method to see if your differences can be reproduced this way. A third technique to get samples is to start up abiword (applying LANG as needed). I guess for your system, you'd use LANG=ru_RU.KOI8-R, LANG=ru_RU.UTF-8, maybe LANG=ru_RU.ISO-8859-1 (which doesn't really make sense) or LANG=en_US.ISO-8859-1 or maybe LANG=C. But anyway, tell us what you did to generate your dejavu text samples. Oh, tell us what your default locale is too. env | grep LANG. Mine is en_AU.UTF-8. Drew -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429621: usplash prevents further start up
Package: usplash Version: 0.5.2-1 Tags: patch Severity: important Justification: user ends up with a black screen Hello, usplash can be started by an initramfs hook. (or somethingelse in the initrd) That results in no 'splash' string in /proc/commandline, but /etc/init.d/usplash does check for that string. The effect is that usplash_quit() has no effect. Which gives the user a black screen. My advice is to not check for kernel commandline options. --- debian/usplash.init.package 2007-06-13 16:17:34.0 +0200 +++ debian/usplash.init 2007-06-19 11:20:27.0 +0200 @@ -51,7 +51,7 @@ else CONSOLE_SCREEN= fi - if type usplash /dev/null 21 grep -q splash /proc/cmdline + if type usplash /dev/null 21 ( pidof usplash /dev/null || [ $(fgconsole 2/dev/null) = 8 ] ); then # Clear VT 8 of any console messages clear /dev/tty8 Cheers Geert Stappers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#428087: #428087 doesn't start after libswt3.2-gtk-java update ...possible fix?
Package: azureus (2.5.0.0+0-1) Debian Bug report logs - #428087 Doesn't start after libswt3.2-gtk-java update. Not sure if this is entirely specific to this bug but... Azureus in stable also failed to start with the same error message, using libswt-gtk-3.2-java (3.2.1-5) package until I used the hack below. *** First installed sun-java5-jre (and purging all other versions of java-virtual-machine ) through debian stable, and checking the following: Changed default java with... # update-alternatives --config java ...to use: /usr/lib/jvm/java-1.5.0-sun/jre/bin/java Kept: /usr/share/java-config/libswt-3.2-java ...same as standard. Using libswt-gtk-3.2-java (3.2.1-5) package which pulls in libswt3.2-gtk-jni (3.2.1-4) (Note the version nr is not consistent... ?something strange here). I did not use the alternative libswt3.2-gtk-java (3.2.1-4), with libswt-gtk-3.2-jni (3.2.1-4) due to dependency issues. Lastly *** Edited LAST line in: /usr/bin/azureus From: org.gudy.azureus2.ui.common.Main $@ To: org.gudy.azureus2.ui.swt.Main $@ HTH. Ps. The azupdater plugin was broken, and required manual download of azupdater_1.8.3.zip and Azureus2_2.3.0.6_P2.pat but that was another story! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#428784: opustex: wrong dependencies for etch
Elie Roux [EMAIL PROTECTED] wrote: Elie, which problems did you encounter which would make the package unusable? I have a default etch installation, and aptitude refuses to install opustex, as I have not the tetex packages it depends on... You mean because you have texlive installed? Well, that's a problem in etch, you can use opustex only with one of the two TeX systems. But that's not a grave bug, even if it is very annoying. - there are other macro packages to typeset music with TeX available in Debian (musictex and musixtex in texlive-music) as well as frontends which are able to use TeX (lilypond). You're right, but OpusTeX is mostly used to typeset gregorian chant, fot which it is really the best macro package, even if it has a lot of defaults. Aha, I didn't know that. I think OpusTeX should not be dropped now from Debian, it would be better to wait for another gregorian chant typesetting system (Lilypond and MusiXTeX are really bad for gregorian chant). Okay, fine with me. Regards, Frank -- Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#429604: [Evolution] Bug#429604: evolution-exchange: there is no debug package
severity 429604 wishlist stop Hi, On Tue, Jun 19, 2007, Jason Thomas wrote: gnome support asked me to install evolutuion-exchange-dbg which does not exist. This is needed to produce readable backtraces. I assume this means that it should exist. If this is the case could you please add it. -dbg packages do not exist for all packages, but we try to provide them in the most useful cases. In all cases, this procedure to get a package with debugging symbols should work: http://wiki.debian.org/HowToGetABacktrace The instructions at GNOME already give this as a fallback: http://live.gnome.org/GettingTraces/DistroSpecificInstructions Bye, -- Loïc Minier
Bug#365681: [Popcon-developers] Bug#365681: Bug#365681: Bug#365681: popcon: using http_proxy
On Mon, Jun 18, 2007 at 01:27:02AM +0200, Petter Reinholdtsen wrote: [Bill Allombert] Why ? /etc/cron.weekly/popularity-contest is also a conffile. To avoid questions during upgrade. We as the package maintainers are unlikely to edit /etc/popularity-contest.conf as part of the package (as it isn't a conffile, but might end up modifying /etc/cron.weekly/popularity-contest, and if the sysadmin edits /etc/cron.weekly/popularity-contest it will give him more work during upgrades than editing /etc/popularity-contest.conf. So are you suggesting we apply my proposed change to /etc/cron.weekly/popularity-contest ? if [ -n $HTTP_PROXY ]; then export http_proxy=$HTTP_PROXY; fi or something better ? On the other hand do you know systems that use http_proxy ? How they do that. I believe it is normally set using /etc/environment for systems were it should be set globally. I was not sure if /etc/environment was affecting cronjob, but it seems to be the case, so this should work already. Cheers, -- Bill. [EMAIL PROTECTED] Imagine a large red swirl here. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#309792: exim4-config: Rewriting via /etc/email-addresses should be configurable to apply to only non-local mail.
I am forwarding this to pkg-exim4-users to solicit the opinion of the user base. Origimal bug report not snipped to give the others full view of the request. On Thu, May 19, 2005 at 08:11:22AM -0700, Steven E. Harris wrote: At present exim applies the /etc/email-addresses rewriting mechanism to all mail sent through the MTA. This causes interference with a setup that permits both local exchange of mail among local users and mail sent out to remote destinations either by the remote_smtp or remote_smtp_smarthost transports. Note that in the configuration captured in this report represents a smarthost setup. Any mail not destined for a local user must be sent out through the designated smarthost. I have another computer that can make direct SMTP connections to non-local hosts and hence does not use the smarthost setup, but it suffers the same problem reported here. When I send a message out from my computer to a remote recipient, I want any mention of my local user name and host replaced with my externally-visible email address; I have this mapping defined as expected in /etc/email-addresses. However, for local mail, I do not want my From address to be rewritten. The local messages do get delivered properly, but if the recipient replies without editing the To address, the message goes out to my externally-visible address unnecessarily. Also, the rewriting in this case changes the facts: The local messages look like they came from a remote sender, despite being sent from a local account. Supporting this rewrite-only-for-non-local scheme requires that the /etc/email-addresses rewrite rule be moved to the transport's headers_rewrite entry, as suggested in the Exim FAQ (Q0803). I use this technique in an older hand-crafted exim.conf on Cygwin and it works as desired. The rewrite rule rewrites also the recipient and the sender, which the normal headers_rewrite approach does not. I am also reluctant to add another headers_rewrite to both external transports. I'm just surprised to see that the Debian exim4-config package doesn't offer this choice. The exim4-config package already has too many options. There is an optional facility offered now to mask the local host name with an alternate visible host name. When selected, this option adds a headers_rewrite entry to the remote_smtp* transports. This option does not support my scheme; my computer is not visible externally and is not meant to receive non-local messages directly. Though I can't provide a patch today for the debconf mechanism, I can at least sketch some proposed changes. o For setups that permit non-local outbound mail, ask the user whether he wants per-user rewriting (via /etc/email/addresses), global rewriting (the current visible host option), or no rewriting. o If either of the first two rewriting options are chosen above, place an appropriate headers_rewrite entry in each of the remote_smtp* transports. o Remove the current global /etc/email-addresses rewrite rule. I found mention of a similar proposal in Bug 229911, but the submitter's proposal to limit the /etc/email-addresses rewriting was not properly addressed in the discussion that followed. I am reluctant to change the behavior of the package in a way that is so hard to understand. Implementing this will cause confusion with a lot of users. pkg-exim4-users, what do you think? Greetings Marc -- - Marc Haber | I don't trust Computers. They | Mailadresse im Header Mannheim, Germany | lose things.Winona Ryder | Fon: *49 621 72739834 Nordisch by Nature | How to make an American Quilt | Fax: *49 621 72739835 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#426407: git-svn: --follow-parent does not follow moves of parent directories
On Mon, May 28, 2007 at 04:43:04PM +0200, David Purdy wrote: Package: git-svn Version: 1:1.4.4.4-2 Severity: normal git-svn fetch --follow-parent does not work correctly for cases where a parent of the directory you're tracking is moved. Hi David, can you please check with git-svn version 1.5.2.1 whether this problem still exists? A lot of work has been done on git-svn since 1.4.4.4. Thanks, Gerrit. Hi Gerrit. Thanks for your reply. I was using 1.4.4.4 because that's the one in testing. git-svn 1.5.2.1 from unstable works much better. In most cases it is detecting moves of parent directories. There is still one case it is not detecting. Example SVN history: r1: Initial import A /A/B/1.txt A /A/B/2.txt A /A/B/3.txt r2: Some changes M /A/B/1.txt M /A/B/2.txt M /A/B/3.txt r3: Moved files to a trunk dirctory: M /A/B D /A/B/1.txt D /A/B/2.txt D /A/B/3.txt A /A/B/trunk/1.txt (from /A/B/1.txt:2) A /A/B/trunk/2.txt (from /A/B/2.txt:2) A /A/B/trunk/3.txt (from /A/B/3.txt:3) r4: Made more changes: M /A/B/trunk/1.txt M /A/B/trunk/2.txt M /A/B/trunk/3.txt If you run: git-svn import svn:server/A/B/trunk/ git-svn fetch Then 'git-svn fetch' detects r3 as the first revision, rather than r1. This is a corner case. eg, what should git-svn do when the parent directory /A/B (r2) had a lot of other files and sub-dirs in it besides trunk? I think that in this case git-svn should emit a warning, and then behave as though all those other files and sub-dirs were deleted going from r2 to r3. Then it should be fine to change our 'base' directory in the repo from /A/B/trunk to /A/B (going backwards from r3 to r2). David. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429620: exim4-config: malformed macro definition
On Tue, Jun 19, 2007 at 09:01:14AM +0200, Gijs Hillenius wrote: Package: exim4-config Version: 4.67-1 Severity: normal This adds to bug report #429617: installation failes I have the same error. Just for the record, this is an entirely different issue, and you are running a completely different version. The part where you have problems has completely changed between your exim4 4.67-1 and the 4.67-3 that #429617 was reported with. Exim configuration error in line 28 of /var/lib/exim4/config.autogenerated.tmp: malformed macro definition. For your information: Lines 27 - 29 of /var/lib/exim4/config.autogenerated.tmp read: .ifndef DC_minimaldns DEBCONFminimaldnsDEBCONF .endif In the previous version, these lines in /var/lib/exim4/config.autogenerated are: .ifndef DC_minimaldns DC_minimaldns = 1 .endif Please update to 4.67-3 from unstable, and accept changes to conffiles. If you have local modification, you'll need to repeat them. There were incompatible changes in the conffiles. Greetings Marc -- - Marc Haber | I don't trust Computers. They | Mailadresse im Header Mannheim, Germany | lose things.Winona Ryder | Fon: *49 621 72739834 Nordisch by Nature | How to make an American Quilt | Fax: *49 621 72739835 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#425905: nscd: should it depend on libc6-amd64
On Tue, Jun 19, 2007 at 01:48:24PM +1200, Andrew Ruthven wrote: Hi, The latest version of nscd (2.5-11) has the bogus dependency on libc6-amd65 again: Package: nscd Priority: optional Section: admin Installed-Size: 244 Maintainer: GNU Libc Maintainers [EMAIL PROTECTED] Architecture: i386 Source: glibc Version: 2.5-11 Depends: libc6-amd64 (= 2.5-5) it is a dpkg-shlibdeps bug, and should be sorted out at some point. The problem is known, and consequences are quite harmless, as what should appear is libc6 (= 2.5-5) and it happens that libc6-amd64 also neds libc6 (= 2.5-5). So it will be sorted out eventually. -- ·O· Pierre Habouzit ··O[EMAIL PROTECTED] OOOhttp://www.madism.org pgpqziLo2DJc8.pgp Description: PGP signature
Bug#399183: [SPAM] - Re: [SPAM] - Re: Bug#399183: xserver-xorg: incorrectly calculatesTrueTypefontmetrics - Bayesian Filter detected spam - Bayesian Filter detected spam
On 6/19/07, Drew Parsons [EMAIL PROTECTED] wrote: OK, you're using the stable etch versions. One possibility is that the matter got addressed and fixed in the following versions that we're now testing in unstable. I've reproduced the xfd box size difference, but let's try for reproduction of the latin sample difference. If the character metrics in xfd windows differ then I'd say that the bug is present in newer Xorg packages. Another two screenshots contain text samples made by Dejavu and Arial fonts. The upper sample is produced using 8-bit font encoding (iso8859-1 for dejavu and koi8-r for arial - it contains some cyrillic). The problem is that the samples look differently, which is unacceptable in my view. I've also attached magnified samples for which the differences are highlighted by thing red strokes. OK, that illustrates the problem well. Let's focus on reproducing the dejavu sample difference you've shown here. Can you describe precisely how you generated these dejavu samples? I used the attaches Tcl/Tk script. Tcl/Tk 8.4.12, which is shipped with etch (and with sid also) uses old X fonts mechanism, which contains the bug (I think). Alternatively, I can generate text samples from gfontview using both gfontview and LANG=en_AU gfontview (my default locale is UTF-8, so I expect the former to be using the iso10646-1 version of the font, while the latter should be using iso8859-1. ). I'm pretty sure that gfontview uses Xft for font rendering. It's a different method, for which I didn't see this bug. So, to reproduce the bug, you have to use some other software. xfontsel comes to mind (with -sample, -sample16, -sampleUCS options). I select the dejavu font, enter some string In girum consum into the Test String then click 'Make String'. I can magnify the resulting sample using xmag. In my case the horizontal spacing appears to be the same. It might be useful if you could try this method to see if your differences can be reproduced this way. A third technique to get samples is to start up abiword (applying LANG as needed). Abiword is based on GTK+2 too, so it can't show the bug too. I guess for your system, you'd use LANG=ru_RU.KOI8-R, LANG=ru_RU.UTF-8, maybe LANG=ru_RU.ISO-8859-1 (which doesn't really make sense) or LANG=en_US.ISO-8859-1 or maybe LANG=C. But anyway, tell us what you did to generate your dejavu text samples. Oh, tell us what your default locale is too. env | grep LANG. Mine is en_AU.UTF-8. My default locale is ru_RU.CP1251. The attached script uses explicit font names for both labels. -- Sergei Golovan sample.tcl Description: Tcl script
Bug#429429: samba: nmbd not always necessary
On Mon, 2007-06-18 at 12:55 -0400, Robert Edmonds wrote: Steve Langasek wrote: On Sun, Jun 17, 2007 at 08:19:43PM -0400, Robert Edmonds wrote: Package: samba Version: 3.0.24-6etch4 Severity: wishlist nmbd is not always necessary; for instance in a non-Windows environment with working name resolution. It would be nice if the samba init script supported only starting the smbd daemon. If you have a non-Windows environment, use a better protocol. :) Such as? NFS has at least as many downsides as CIFS (for which this space is too small to enumerate); e.g., samba runs in userspace and supports unix extensions which are only comparable to the kernel-only NFSv4 daemon. As a team, we support the use of Samba as an NFS replacement. This is an explicit design goal of the CIFS unix extensions. Andrew Bartlett -- Andrew Bartlett http://samba.org/~abartlet/ Authentication Developer, Samba Team http://samba.org Samba Developer, Red Hat Inc. signature.asc Description: This is a digitally signed message part
Bug#429623: pidgin: purple-remote refuses to execute
Package: pidgin Version: 2.0.1-1 Severity: normal Tags: patch $ purple-remote --help File /usr/bin/purple-remote, line 102 if protocol == xmpp ^ SyntaxError: invalid syntax $ python -V Python 2.4.4 Changing line 102 to include the colon at the end seems to cause purple-remote to execute correctly. Under the assumption that /usr/bin/purple-remote is copied straight from libpurple/purple-remote, a patch to the Pidgin tree is attached to change that line. --- Drake Wilson -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.20.1 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages pidgin depends on: ii libavahi-compat-howl00.6.19-2Avahi Howl compatibility library ii libc62.5-11 GNU C Library: Shared libraries ii libcairo21.4.6-1.1 The Cairo 2D vector graphics libra ii libdbus-1-3 1.1.0-1 simple interprocess messaging syst ii libdbus-glib-1-2 0.73-2 simple interprocess messaging syst ii libfontconfig1 2.4.2-1.2 generic font configuration library ii libglib2.0-0 2.12.12-1 The GLib library of C routines ii libgstreamer0.10-0 0.10.13-2 Core GStreamer libraries and eleme ii libgtk2.0-0 2.10.13-1 The GTK+ graphical user interface ii libgtkspell0 2.0.10-3+b1 a spell-checking addon for GTK's T ii libice6 1:1.0.3-2 X11 Inter-Client Exchange library ii libncursesw5 5.6-3 Shared libraries for terminal hand ii libnspr4-0d 4.6.6-3 NetScape Portable Runtime Library ii libnss3-0d 3.11.5-3+b1 Network Security Service libraries ii libpango1.0-01.16.4-1Layout and rendering of internatio ii libperl5.8 5.8.8-7 Shared Perl library ii libsasl2-2 2.1.22.dfsg1-12 Authentication abstraction library ii libsasl2-modules 2.1.22.dfsg1-12 Pluggable Authentication Modules f ii libsm6 2:1.0.3-1 X11 Session Management library ii libstartup-notification0 0.9-1 library for program launch feedbac ii libx11-6 2:1.0.3-7 X11 client-side library ii libxcursor1 1:1.1.8-2 X cursor management library ii libxext6 1:1.0.3-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.3-2 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-4 X11 Input extension library ii libxinerama1 1:1.0.2-1 X11 Xinerama extension library ii libxml2 2.6.29.dfsg-1 GNOME XML library ii libxrandr2 2:1.2.1-1 X11 RandR extension library ii libxrender1 1:0.9.2-1 X Rendering Extension client libra ii libxss1 1:1.1.2-1 X11 Screen Saver extension library ii pidgin-data 2.0.1-1 multi-protocol instant messaging c Versions of packages pidgin recommends: ii gstreamer0.10-plugins-base0.10.13-2 GStreamer plugins from the base ii gstreamer0.10-plugins-good0.10.5-7 GStreamer plugins from the good ii python-dbus 0.81.1-1 simple interprocess messaging syst -- no debconf information --- libpurple/purple-remote.old 2007-06-19 02:50:57.0 -0500 +++ libpurple/purple-remote 2007-06-19 02:51:05.0 -0500 @@ -94,7 +94,7 @@ def execute(uri): match = re.match(urlregexp, uri) protocol = match.group(2) -if protocol == xmpp +if protocol == xmpp: protocol = jabber if protocol == aim or protocol == icq: protocol = oscar
Bug#429192: pending upload
tag 429192 +pending tag 429344 +pending thanks The problem has been discussed with upstream. Actually, the library is not used, so GLPI is not really vulnerable. A new version has been released including the fix, and has been uploaded to my sponsor (it will be uploaded ASAP). A discussion is in progress with the upstream authors to remove the copy of PHPMailer. Regards, Pierre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429625: linux-source-2.6.18 build fails on hppa - missing patch?
Package: linux-source-2.6.18 Version: 2.6.18.dfs Kernel source does not compile on parisc (HP 712/60). I am running kernel 2.6.8 libc version 2.3.6.ds1-13 gcc version 4:4.1.1-15 Should there not be a hppa/parisc-specific patch to apply to the standard debian kernel source package? No such patch appears to be available in etch. To reproduce error, unpack sources, copy .config from pre-packaged kernel image, and make-kpkg boris:/share/linux-source-2.6.18# cp /boot/config-2.6.18-4-parisc . config boris:/share/linux-source-2.6.18# make-kpkg --initrd linux-image ... CC arch/parisc/mm/init.o arch/parisc/mm/init.c:34: error: conflicting types for '_text' include/asm-generic/sections.h:6: error: previous declaration of '_text' was here arch/parisc/mm/init.c:36: error: conflicting types for '_end' include/asm-generic/sections.h:13: error: previous declaration of '_end' was here arch/parisc/mm/init.c:37: error: conflicting types for '__init_begin' include/asm-generic/sections.h:9: error: previous declaration of '__init_begin' was here arch/parisc/mm/init.c:37: error: conflicting types for '__init_end' include/asm-generic/sections.h:9: error: previous declaration of '__init_end' was here make[2]: *** [arch/parisc/mm/init.o] Error 1 make[1]: *** [arch/parisc/mm] Error 2 make[1]: Leaving directory `/share/linux-source-2.6.18' make: *** [debian/stamp-build-kernel] Error 2 _ Tiscali.Supermail: la tua email con 2GB di Spazio, Antivirus e Antispam http://vas.tiscali.it/supermail/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429626: exim4: [INTL:eu] Basque translation update
Package: exim4 Severity: wishlist Tags: patch l10n Hi Atached exim4 debconf templates basque translation update, please commit it. thx -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.21 Locale: LANG=eu_ES.UTF-8, LC_CTYPE=eu_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages exim4 depends on: ii debconf [debconf-2.0] 1.5.13 Debian configuration management sy pn exim4-basenone (no description available) pn exim4-daemon-light | exim4-da none (no description available) exim4 recommends no packages. # translation of exim4-eu.po to Euskara # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans# #Developers do not need to manually edit POT or PO files. # # Piarres Beobide Egana [EMAIL PROTECTED], 2004, 2006, 2007. msgid msgstr Project-Id-Version: exim4-eu\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2007-06-06 07:52+0200\n PO-Revision-Date: 2007-06-19 09:45+0200\n Last-Translator: Piarres Beobide [EMAIL PROTECTED]\n Language-Team: Euskara [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Generator: Pootle 0.11\n Plural-Forms: nplurals=2; plural=(n != 1);\n #. Type: boolean #. Description #: ../exim4-base.templates:1001 msgid Remove undelivered mails in spool directory? msgstr Ezabatu bidaligabeko hilara direktorioko ePostak? #. Type: boolean #. Description #: ../exim4-base.templates:1001 msgid There are mails in the Exim spool directory /var/spool/exim4/input which have not yet been delivered. Removing Exim will cause them to remain undelivered until Exim is re-installed. msgstr Oraindik bidali ez diren ePostak daude /var/spool/exim4/input exim hilara direktorioan. Exim ezabatzeak hauek exim berriz instalatu arte bidali gabe geratzea eragingo du. #. Type: boolean #. Description #: ../exim4-base.templates:1001 msgid If this option is not chosen, the spool directory is kept, allowing the messages in the queue to be delivered at a later date after Exim is re- installed. msgstr Aukera hau ez hautatu ezkero, ilara direktorioa mantendu egingo da, mezu ilara beranduago exim instalatzen denean bidaltzeko aukera emanez. #. Type: boolean #. Description #: ../exim4-base.templates:2001 msgid Move undelivered mails from exim 3 to exim4 spool? msgstr Bidaligabeko ePostak exim3 hilaratik exim4 hilarara mugitu? #. Type: boolean #. Description #: ../exim4-base.templates:2001 msgid There are some undelivered mails in exim 3 (or exim-tls 3) spool directory / var/spool/exim/input/. msgstr Bidaligabeko zenbait posta daude /var/spool/exim/input/ exim3 (edo xim-tls3) hilara direktorioan. #. Type: boolean #. Description #: ../exim4-base.templates:2001 msgid Choosing this option will move these messages to exim4's spool (/var/spool/ exim4/input/) where they will be handled by exim4. msgstr Aukera hau hautatuaz mezu horiek exim4 hilarara mugituko dira (/var/spool/ exim4/input/) eta exim4 bidez kudeatuko dira. #. Type: boolean #. Description #: ../exim4-base.templates:2001 msgid This works only one-way: Exim4 can handle exim 3 spool but not vice-versa. If you reject this option, you need to move the messages yourself or they will never be delivered. msgstr Honek alde batetara bakarrik funtzionatzen du. Exim4-ek exim 3 ilara kudea dezake baina ez alderantziz. Aukera hau ezetsiaz gero mezuak beranduago eskuz mugitu beharko dituzu, bestela ez dira inoiz banatuko eta. #. Type: note #. Description #: ../exim4-base.templates:3001 msgid Reconfigure exim4-config instead of this package msgstr Exim4-config birkonfiguratu pakete honen beharrean #. Type: note #. Description #: ../exim4-base.templates:3001 msgid Exim4 has its configuration factored out into a dedicated package, exim4- config. To reconfigure Exim4, use 'dpkg-reconfigure exim4-config'. msgstr Exim4-ek bere konfigurazio beste pakete batetan du, exim4-config. Exim4 birkonfiguratu nahi izan ezkero \dpkg-reconfigure exim4-config\ erabili. #. Type: select #. Choices #. Translators beware! the following six strings form a single #. Choices menu. - Every one of these strings has to fit in a standard #. 80 characters console, as the fancy screen setup takes up some space #. try to keep below ~71 characters. #. DO NOT USE commas (,) in Choices translations otherwise #. this will break the choices shown to users #: ../exim4-config.templates:1001 msgid internet site; mail is sent and received
Bug#429529: live-image: please support using an image stored in a normal of a USB key
Lucas Nussbaum wrote: Would this be possible to do with debian-live ? yes. looking into it later (whereas later means in about two weeks). -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: [EMAIL PROTECTED] Internet: http://people.panthera-systems.net/~daniel-baumann/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429624: linux-wlan-ng: bring USB prism2 wlan device in usable state
Package: linux-wlan-ng Version: 0.2.8+dfsg-1 Severity: normal Hello there, I have a prism2 usb adapter, which isn't in a usable state straight after plugging it in. The problem is, in order to work with tools like wireless-tools or NetworkManager, it needs to issue the command wlanctl-ng wlan0 lnreq_ifstate ifstate=enable. I looked through the scripts in the linux-wlan-ng package, and noticed that it only gets issued just before ifup'ing the interface (/etc/network/if-pre-up.d/linux-wlan-ng-pre-up). So the best idea would be to execute said command right after plugging it in. At this point I'm not sure where the best place would be. I'd be happy to hear about proposals from your side and will test patches or packages if needed. Kind regards, Lee Garrett -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429630: Gzip files in django example
Package: python-openid Version: 2.0.0-1 Severity: wishlist Hi, Because of some compress files in the django example (/usr/share/doc/python-openid/examples/djopenid), it doesn't work out of the box. Can you tar the whole directory please ? Thanks. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core) Locale: LANG=fr_FR, LC_CTYPE=fr_FR (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages python-openid depends on: ii python2.4.4-6An interactive high-level object-o ii python-central0.5.14 register and build utility for Pyt ii python-urljr 1.0.1-1Common interface to urllib2 and cu ii python-yadis 1.1.0-1Yadis service discovery library python-openid recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429627: boson: System locked up if not use --indirect; if use --indirect, crashed when start mission
Package: boson Version: 0.12dfsg1-2+b1 Severity: critical Justification: breaks the whole system If I start boson normally, and then when I click Start Singleplayer Game, the whole system locked up and need hard reset (manually power off) If I start boson --indirect then the hard locked up is solved. When I click Start Singleplayer Game and Start Mission, boson crashed. It prints out the following message on the console: alsa_blitbuffer: Could not write audio data to sound device: Bad file descriptor -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.21.5-k864h10pre Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Graphic Card: VGA compatible controller: ATI Technologies Inc RV350 AR [Radeon 9600] using fglx driver from ati version ati-driver-installer-8.37.6-x86.x86_64.run (patched) Some others 3D games works fine such as flight simulator, billard-gl, foobillard, brutalchess, csmash. Direct rendering is enabled acording to Xorg log file. Versions of packages boson depends on: ii boson-data 0.12-1Datas for Boson, a real-time strat ii kdelibs4c2a4:3.5.5a.dfsg.1-8 core libraries and binaries for al ii libc6 2.3.6.ds1-13 GNU C Library: Shared libraries ii libgcc11:4.1.1-21GCC support library ii libice61:1.0.1-2 X11 Inter-Client Exchange library ii libopenal0a1:0.0.8-4 OpenAL is a portable library for 3 ii libqt3-mt 3:3.3.7-4 Qt GUI Library (Threaded runtime v ii libsm6 1:1.0.1-3 X11 Session Management library ii libstdc++6 4.1.1-21 The GNU Standard C++ Library v3 ii libvorbis-dev 1.1.2.dfsg-1.2The Vorbis General Audio Compressi ii libx11-6 2:1.0.3-7 X11 client-side library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxmu61:1.0.2-2 X11 miscellaneous utility library ii libxrandr2 2:1.1.0.2-5 X11 RandR extension library ii python2.4 2.4.4-3 An interactive high-level object-o Versions of packages boson recommends: ii boson-music 0.12-1 Music Pack for Boson, a real-time -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429629: Fails to create image for raid5
Package: yaird Version: 0.0.12-20 yaird fails to create an initrd image for a raid5 system: $ sudo mkinitrd.yaird -o /boot/initrd.img-2.6.22-rc5 2.6.22-rc5 yaird error: Could not read output for /sbin/modprobe -v -n --show-depends --set-version 2.6.22-rc5 raid5 (fatal) Seems to me it tries to add the kernel module raid5 to the image, however, no such module exists in the kernel. Perhaps it's refering to raid456. Anyway, it's built with CONFIG_MD_RAID456=y, so it should try to load it as a module in the first place. Is this perhaps due to the soon 2 year old bug #337724? If so, perhaps yaird should bail out with an error message like; doesn't support raid devices if possible. And I raise a vote to prioritize raid support in yaird. After all, from what I can see, there has been a patch available since that bug was filed. Please tell me if I can be of further help in this issue. Best regards, Gustaf -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429437: new MAKEDEV usage chroot un friendly
On Tue, 19 Jun 2007 08:38:30 am Ludovic RESLINGER wrote: Ok, but this is not a specific problem of libraw1394 in this case. No its not. irda-utils is another example. libraw1394 require /dev/MAKEDEV to create /dev/raw1394. If you use udev, you must activate and configure it before to install libraw1394. udev is not active in a chroot. It is not a solution to apply your patch because if /dev/MAKEDEV doesn't exist, /dev/raw1394 won't be created and libraw1394 won't work. I don't know how udev work in chroot, I think that you should ask it at udev's maitainer. Or your postinst could get smarter. Unconditionally calling cd /dev ./MAKEDEV *assumes* udev is active. That condition is not true in all cases. Kel. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429631: Requesting Bugzilla v3 package for Debian testing branch
Package: bugzilla Version: 3.0 Severity: important Tags: experimental please include a package for this in debian testing branch repositories -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#366023: mod_mime_magic: invalid type 0 in mconvert()
Hello, once again this bug came back with the last update of libmagic1 : [Tue Jun 19 08:22:59 2007] [error] mod_mime_magic: type search/400\tinput\t\ttext/x-tex invalid [Tue Jun 19 08:22:59 2007] [error] mod_mime_magic: type search/400\tsection\ttext/x-tex invalid [Tue Jun 19 08:22:59 2007] [error] mod_mime_magic: type search/400\tsetlength\ttext/x-tex invalid [Tue Jun 19 08:22:59 2007] [error] mod_mime_magic: type search/400\tdocumentstyle\ttext/x-tex invalid [Tue Jun 19 08:22:59 2007] [error] mod_mime_magic: type search/400\tchapter\ttext/x-tex invalid [Tue Jun 19 08:22:59 2007] [error] mod_mime_magic: type search/400\tdocumentclass\ttext/x-tex invalid [Tue Jun 19 08:22:59 2007] [error] mod_mime_magic: type regex\t\t[Cc]onstant[[:space:]]+[Ss]tory\ttext/x-inform invalid [Tue Jun 19 08:23:00 2007] [error] mod_mime_magic: type search/400\tinput\t\ttext/x-tex invalid [Tue Jun 19 08:23:00 2007] [error] mod_mime_magic: type search/400\tsection\ttext/x-tex invalid [Tue Jun 19 08:23:00 2007] [error] mod_mime_magic: type search/400\tsetlength\ttext/x-tex invalid [Tue Jun 19 08:23:00 2007] [error] mod_mime_magic: type search/400\tdocumentstyle\ttext/x-tex invalid [Tue Jun 19 08:23:00 2007] [error] mod_mime_magic: type search/400\tchapter\ttext/x-tex invalid [Tue Jun 19 08:23:00 2007] [error] mod_mime_magic: type search/400\tdocumentclass\ttext/x-tex invalid [Tue Jun 19 08:23:00 2007] [error] mod_mime_magic: type regex\t\t[Cc]onstant[[:space:]]+[Ss]tory\ttext/x-inform invalid and of course mod_mime_magic: invalid type 0 in mconvert() perhaps you should definitely remove the support of x-tex and x-inform to avoid modyfing manually /usr/share/file/magic.mime after every update, or at least offer the possibility to not replace this file if it has been modyfied by the user... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429628: Django server example don't work
Package: python-openid Version: 2.0.0-1 Severity: normal Tags: patch Hi, The server try to use sreg.sendSRegFields which doesn't exist when adding the registration data in the response. This can be corrected with the joined patch. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core) Locale: LANG=fr_FR, LC_CTYPE=fr_FR (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages python-openid depends on: ii python2.4.4-6An interactive high-level object-o ii python-central0.5.14 register and build utility for Pyt ii python-urljr 1.0.1-1Common interface to urllib2 and cu ii python-yadis 1.1.0-1Yadis service discovery library python-openid recommends no packages. -- no debconf information --- server.orig/views.py2007-06-19 10:02:19.0 +0200 +++ server/views.py 2007-06-19 10:01:17.0 +0200 @@ -221,9 +221,10 @@ 'timezone': 'America/New_York', } -sreg.sendSRegFields(openid_request, sreg_data, -openid_response) - +sreg_req = sreg.SRegRequest.fromOpenIDRequest(openid_request) +sreg_resp = sreg.SRegResponse.extractResponse(sreg_req, sreg_data) +openid_response.addExtension(sreg_resp) + return displayResponse(request, openid_response) def displayResponse(request, openid_response):
Bug#429630: Gzip files in django example
Twas brillig at 10:23:15 19.06.2007 UTC+02 when Frederic Pauget did gyre and gimble: FP Because of some compress files in the django example FP (/usr/share/doc/python-openid/examples/djopenid), it doesn't work out of FP the box. Thanks for pointing out, I'd try to avoid compressing example files at all, if permitted by Policy. -- JID: [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429628: [Frederic Pauget] Bug#429628: Django server example don't work
tags upstream 429628 thanks Here is another bugreport regarding example code. ---BeginMessage--- Package: python-openid Version: 2.0.0-1 Severity: normal Tags: patch Hi, The server try to use sreg.sendSRegFields which doesn't exist when adding the registration data in the response. This can be corrected with the joined patch. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core) Locale: LANG=fr_FR, LC_CTYPE=fr_FR (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages python-openid depends on: ii python2.4.4-6An interactive high-level object-o ii python-central0.5.14 register and build utility for Pyt ii python-urljr 1.0.1-1Common interface to urllib2 and cu ii python-yadis 1.1.0-1Yadis service discovery library python-openid recommends no packages. -- no debconf information --- server.orig/views.py2007-06-19 10:02:19.0 +0200 +++ server/views.py 2007-06-19 10:01:17.0 +0200 @@ -221,9 +221,10 @@ 'timezone': 'America/New_York', } -sreg.sendSRegFields(openid_request, sreg_data, -openid_response) - +sreg_req = sreg.SRegRequest.fromOpenIDRequest(openid_request) +sreg_resp = sreg.SRegResponse.extractResponse(sreg_req, sreg_data) +openid_response.addExtension(sreg_resp) + return displayResponse(request, openid_response) def displayResponse(request, openid_response): ---End Message--- -- JID: [EMAIL PROTECTED]
Bug#429632: cupsys-driver-gutenprint: Please upgrade to new gutenprint stable release 5.0.1 (better PIXMA support)
Package: cupsys-driver-gutenprint Version: 5.0.0-3 Severity: wishlist Dear gutenprint Debian maintainers, my e-mail to you was ignored so I am now writing this bug report. I would greatly appreciate it if you could upgrade the cupsys-driver-gutenprint Debian package to the new gutenprint stable release 5.0.1. I am using a Canon PIXMA printer and their changelog says that there were some important fixes concerning this printer. Regards, Benjamin Eikel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429636: ram disk icon missing in nautilus places sidebar
Package: nautilus Version: GNOME2.18.2 unspecified Severity: Normal Gnome-Distributor: Debian Synopsis: ram disk icon missing in nautilus places sidebar Bugzilla-Product: nautilus Bugzilla-Component: Sidebar Panel: Places Bugzilla-Version: unspecified Description: Description of Problem: When I mount a ram disk, the nautilus side bar does not seem to have an icon for it - it uses a generic paper icon which seems to be too large. Not sure when the break happened, but it used to have the correct icon! Steps to reproduce the problem: 1. mke2fs -m 0 /dev/ram0 2. mount /dev/ram0 /media/ramdisk/ 3. check the icon on the nautilus side bar Actual Results: Blank paper type icon with the wrong size Expected Results: Ram disk icon with the correct size How often does this happen? Every time I mount a ram disk Additional Information: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429634: ITP: slack -- configuration management program for lazy admins
Package: wnpp Severity: wishlist Owner: Andrew Pollock [EMAIL PROTECTED] * Package name: slack Version : 0.14.1 Upstream Author : Allan Sundell [EMAIL PROTECTED] * URL : http://www.sundell.net/~alan/projects/slack/ * License : GPL Programming Lang: Perl Description : configuration management program for lazy admins slack tries to allow centralized configuration management with a bare minimum of effort. Usually, just putting a file in the right place will cause the right thing to be done. It uses rsync to copy files around, so can use any sort of source (NFS directory, remote server over SSH, remote server over rsync) that rsync supports. -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429217: gnumed-client: gnumed.xpm discrepancy
On Sun, Jun 17, 2007 at 08:41:14PM +0200, RKI Andreas wrote: According to the information you gave per PM I suspect either menu or cdd-common as the source of the package (med-practice depends from med-common and this depends from cdd-common). In cdd-common some code is introduced that creates user menu entries if a user calls update-menus. I would suggest to try sudo apt-get remove cdd-common (which will also deinstall med-common and med-practice but you do not really need these to have gnumed-client installed. Then try update-menus. This should build correct menus. It does indeed. So, the bottom line is: Installing both gnumed-client from testing/unstable and cdd-common from stable gives incorrect menus. Not sure whether this counts as a bug or not. It sounds more like an incompatiblity. If my suspection is right the bug can either be closed or reassigned to cdd-common - but please make sure to append your previous output (which you posted in private) to the bug report to enable me tracking down this problem (well, it is the same manitainer who has to care about the problem ... ;-)). I'll let you decide how to eventually handle the bug report. Karsten -- GPG key ID E4071346 @ wwwkeys.pgp.net E167 67FD A291 2BEA 73BD 4537 78B9 A9F9 E407 1346 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#424899: reproducing..
I've found a fairly reliable way to reproduce this, I think. If I start a movie in mplayer, pause it, suspend, resume, suspend, and resume again, it seems to crash on that second resume (it crash on resume 50% of the time or so). -- see shy jo signature.asc Description: Digital signature
Bug#429641: nautilus about window doesn't close
Package: nautilus Version: GNOME2.18.2 unspecified Severity: Normal Gnome-Distributor: Debian Synopsis: nautilus about window doesn't close Bugzilla-Product: nautilus Description: Description of Problem: When you select about from the help menu, the info window opens but then the close button won't close it. You have to use the close window widget. Tried killall nautilus then repeat - still broken, Steps to reproduce the problem: 1. open a nautilus window 2. click help on menu bar 3. select about 4. try to click on close button Actual Results: It doesn't close Expected Results: It closes How often does this happen? Every time -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429635: RoM: libapache-mod-auth-mysql: obsoleted due to apache13 removal from unstable
Package: ftp.debian.org Severity: normal hi, please remove the binary package libapache-mod-auth-mysql 4.3.9-3. It is obsolete due to the removal of apache13 from the archive. mod-auth-mysql 4.3.9-4 uploaded to unstable already stopped building it. bye, - michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429624: [Linux-wlan-ng-devel] Bug#429624: linux-wlan-ng: bring USB prism2 wlan device in usable state
On Tue, Jun 19, 2007 at 09:52:04AM +0200, Lee Garrett wrote: Package: linux-wlan-ng Version: 0.2.8+dfsg-1 Severity: normal So the best idea would be to execute said command right after plugging it in. At this point I'm not sure where the best place would be. I'd be happy to hear about proposals from your side and will test patches or packages if needed. You can try to run it from udev rules (RUN+=your line here), but IIRC putting the interface up suddenly avoids loading firmware, that can only be done if the interface is not in 'enabled' state. In ubuntu they used to put the interface up trough udev, and now I figure out why, but this was preventing loading firmare. Some devices do not need the firmware at all (like the one I own) but in general you need it. To test this you should try to download the source package, uncomment the line in debian/patches/00list referring to the udev rules file and rebuild the package. with that patch it should be NetworkManager friendlier, but the firmware issue should bite you. If you find a workaround for the firmware issue... I'll be really happy to apply the patch. Cheers -- Enrico Tassi -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429633: kexec-tools: Slightly incorrect LSB header in the init.d scripts
Package: kexec-tools Version: 1.101-kdump10-2 Tags: patch The dependency and runlevel information provided in the LSB headers in the init.d scripts in kexec-tools is slightly wrong. Here is a patch to fix it. The kexec-tools init.d scripts should only run in runlevel 6, so the default-start values should be rmeoved. Also, the dependencies for the stop scripts are the wrong way around for init.d/kexec, it should stop before reboot, not before kexec-load. Also, kexec-load should stop before kexec, so this should be reflected in the required-stop for that script. The should-start and should-stop headers can probably be removed, as they are empty. diff -ur kexec-tools-1.101-kdump10-orig/debian/kexec.init.d kexec-tools-1.101-kdump10/debian/kexec.init.d --- kexec-tools-1.101-kdump10-orig/debian/kexec.init.d 2007-06-19 09:24:00.0 +0100 +++ kexec-tools-1.101-kdump10/debian/kexec.init.d 2007-06-19 09:25:58.0 +0100 @@ -1,11 +1,11 @@ #! /bin/sh ### BEGIN INIT INFO # Provides:kexec -# Required-Start: kexec-load -# Required-Stop: kexec-load +# Required-Start: +# Required-Stop: reboot # Should-Start: # Should-Stop: -# Default-Start: 0 1 2 3 4 5 +# Default-Start: # Default-Stop:6 # Short-Description: Execute the kexec -e command to reboot system # Description: diff -ur kexec-tools-1.101-kdump10-orig/debian/kexec-load.init.d kexec-tools-1.101-kdump10/debian/kexec-load.init.d --- kexec-tools-1.101-kdump10-orig/debian/kexec-load.init.d 2007-06-19 09:24:00.0 +0100 +++ kexec-tools-1.101-kdump10/debian/kexec-load.init.d 2007-06-19 09:26:12.0 +0100 @@ -1,11 +1,11 @@ #! /bin/sh ### BEGIN INIT INFO # Provides:kexec-load -# Required-Start: $local_fs -# Required-Stop: $local_fs +# Required-Start: +# Required-Stop: $local_fs kexec # Should-Start: # Should-Stop: -# Default-Start: 0 1 2 3 4 5 +# Default-Start: # Default-Stop:6 # Short-Description: Load kernel image with kexec # Description: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429639: vsftpd 500 OOPS: priv_sock_get_result
Package: vsftpd Version: 2.0.5-2 vsftpd refuses to authenticate users. I was using pam_pgsql plugin. strace output in attachment. /usr/sbin/vsftpd linux-gate.so.1 = (0xe000) libwrap.so.0 = /lib/libwrap.so.0 (0xb7f61000) libnsl.so.1 = /lib/i686/cmov/libnsl.so.1 (0xb7f4a000) libpam.so.0 = /lib/libpam.so.0 (0xb7f42000) libdl.so.2 = /lib/i686/cmov/libdl.so.2 (0xb7f3e000) libresolv.so.2 = /lib/i686/cmov/libresolv.so.2 (0xb7f2b000) libutil.so.1 = /lib/i686/cmov/libutil.so.1 (0xb7f27000) libcap.so.1 = /lib/libcap.so.1 (0xb7f22000) libssl.so.0.9.8 = /usr/lib/i686/cmov/libssl.so.0.9.8 (0xb7ee2000) libcrypto.so.0.9.8 = /usr/lib/i686/cmov/libcrypto.so.0.9.8 (0xb7da1000) libc.so.6 = /lib/i686/cmov/libc.so.6 (0xb7c5e000) /lib/ld-linux.so.2 (0xb7f77000) libz.so.1 = /usr/lib/libz.so.1 (0xb7c4a000) /home/ftp# ls -la testuser dr-xr-xr-x 2 ftp root4096 2007-06-19 06:02 . drwxr-xr-x 4 ftp nogroup 4096 2007-06-19 06:02 .. /etc/pam_pgsql.conf : database = ftp user = grey password = blah table = accounts timeout=15 user_column = s_username pwd_column = s_password expired_column = b_expired pw_type = md5 /etc/pam.d/vsftpd : authrequiredpam_pgsql.so account requiredpam_pgsql.so passwordrequiredpam_pgsql.so /etc/vsftpd.conf : anonymous_enable=NO local_enable=YES write_enable=NO anon_upload_enable=NO anon_mkdir_write_enable=NO anon_other_write_enable=NO chroot_local_user=YES guest_enable=YES guest_username=ftp listen=YES pasv_min_port=3 pasv_max_port=30999 use_sendfile=NO #ftp localhost Connected to localhost. 220 (vsFTPd 2.0.5) Name (localhost:root): testuser 331 Please specify the password. Password: 500 OOPS: priv_sock_get_result Login failed. 421 Service not available, remote server has closed connection ftp % cat /var/log/auth.log : Jun 19 12:06:39 debian PAM_pgsql[19419]: (vsftpd) user testuser authenticated. strace.log Description: Binary data
Bug#429644: libtheora-dev: impossible to install package on unstable
Package: libtheora-dev Version: unstable Severity: grave Justification: renders package unusable The package seems broken, see the following trace : debian:~# export LANG=C ; apt-get install libtheora-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: libtheora-dev: Depends: libtheora0 (= 0.0.0.alpha7.dfsg-2) but 1.0alpha3-sarge0.1 is to be installed E: Broken packages Regards Stephane -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.21-1-k7 (SMP w/1 CPU core) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#419693: Debbugs Feature Enhancements and Archiving
On Thu, Jun 14, 2007 at 06:28:32AM -0700, Don Armstrong wrote: The second thing that has been done is to fix archival support so that it is versioning aware. Bugs will now be archived if they have been: 0) -done'd 1) fixed in unstable 2) fixed in testing 3) fixed in stable if tagged stable for at least 28 days and no activity has occured in 28 days. Great! It seems to work fine, thank you for your work. I guess you can close bug #419693 now :) -- Met vriendelijke groet / with kind regards, Guus Sliepen [EMAIL PROTECTED] signature.asc Description: Digital signature
Bug#429638: libcommons-fileupload-java: Upstream version 1.2 available
Package: libcommons-fileupload-java Severity: wishlist Hi all, I'm working on packaging Solr, which depends on version 1.2 of libcommons-fileupload. It's not compatible with version 1.0 which is now in Debian. 1.0 is from 2003; 1.2 was released in February 2007. Please update libcommons-fileupload-java to version 1.2 Kind regards, Jan-Pascal -- System Information: Debian Release: 4.0 APT prefers oldstable APT policy: (990, 'oldstable'), (900, 'stable'), (100, 'testing'), (50, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429522: driconf: cannot find some pictures in expert mode
On Mon, 2007-06-18 at 17:23 +0200, Jerome Warnier wrote: Package: driconf Version: 0.9.1-1 Severity: minor The following errors spit out on the console when switching to expert mode: Warning: could not find screen.png. Warning: could not find card.png. Warning: could not find screencard.png. Warning: could not find drilogo.jpg. Hope this helps Fix uploaded, thanks for the report. -- Earthling Michel Dänzer | http://tungstengraphics.com Libre software enthusiast | Debian, X and DRI developer
Bug#348676: dstat: option to not change xterm title
Come on folks, this is a BUG, not a wishlist item. It destroys a setting a user has made without asking. How it works in Bash is that the PROMPT_COMMAND contains the escape This is complete and utter bullshit. PROMPT_COMMAND does exactly what it does, namely exactly what the user configured it to do. Changing the title is not a bash feature in any way, it is completely unrelated to bash. (And as a matter of fact, most people I know use PS1 for that, and many use cd to change the title bar because its the only time it changes, buggy programs excepted). sequences to change the Xterm title. However, programs you run do not have access to this PROMPT_COMMAND environment variable, because it is not exported. And even if it were, it has nothing to do with restoring corrupted titles. If it was exported, I could at least use that to see if that capability is being used on the system. No, you couldn't, especially if it isn't done in PROMPT_COMMAND. This is complete fantasy. Ok, that doesn't grant me the right to overwrite Right, you should restore it like other - well behaving - programs do. it, but at least I would be sure the shell would fix it after dstat is exited. Or I could reset it myself :) The shell never does it. If anything does, it is the user. Now, what I added today to dstat is a check for XTERM_SHELL. If I find my shell is bash I replace the xterm title. This completely illogical. You could do it on odd days or when the disk is full, and it would be about as random. There is no relationship between I can corrupt the terminal window title and bash is running. None at all. Adding one will just add another bug confusing users. Not sure if that is a better implementation or if this helps in any way for you. It is one more bug on top of many. Users will be completely confused as to when their title gets changed, because nobody will ever assume its depending on the shell, because this feature has nothing to do with any shells. Though I'm still open to look at a way to make this work better without adding another command An obvious way to improve it is by acknowledging that it is a bug (first thing, because it corrupts a user setting without asking) and then removing it, or making it optional, or restoring the title by first reading it or using other means of restoring it. I, for one, am increasingly driven back to vmstat (or at least the stable release of dstat for the time being) as the bugs in dstat only ever seem to increase over time, never decrease. This is not a threat :) Be good, be well, -- The choice of a -==- _GNU_ ==-- _ generation Marc Lehmann ---==---(_)__ __ __ [EMAIL PROTECTED] --==---/ / _ \/ // /\ \/ / http://schmorp.de/ -=/_/_//_/\_,_/ /_/\_\ XX11-RIPE -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429640: missing bts show completion
Package: zsh Version: 4.3.4-6 Severity: wishlist bts show footab should work the same as apt-cache show footab There are some other completions possible in bts, but this is the only one I find myself missing. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.21-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages zsh depends on: ii cdebconf [debconf-2.0]0.116 Debian Configuration Management Sy ii debconf [debconf-2.0] 1.5.13 Debian configuration management sy ii libc6 2.5-10 GNU C Library: Shared libraries ii libncurses5 5.6-3 Shared libraries for terminal hand Versions of packages zsh recommends: ii libcap1 1:1.10-14 support for getting/setting POSIX. ii libpcre3 6.7-1 Perl 5 Compatible Regular Expressi -- no debconf information -- see shy jo signature.asc Description: Digital signature
Bug#309953: dstat aborting with backtrace
On Mon, Jun 18, 2007 at 10:19:50AM -0700, Andrew Pollock [EMAIL PROTECTED]
wrote:
tags 309953 + moreinfo
thanks
Let me investigate the bugs I have found in the earlier version:
I installed dstat from unstable:
Setting up dstat (0.6.6-1) ...
INFO: using old version '/usr/bin/python2.3'
and then tried the SIGINT trick while dstat was starting up (by simply
pressing ^C which is easy on a busy system).
out of the 8 times I did this:
6 times my ^C was completeley ignored by dstat (I had to press twice)
1 times out of this it didn't use colour
1 times it worked (yay!)
1 times I got a backtrace:
cerebro ~# ds
Traceback (most recent call last):
File /usr/bin/dstat, line 17, in ?
from __future__ import generators
KeyboardInterrupt
The backtrace is just an annoyance, ignoring sigint is evil, however.
The dstat crashes with backtrace bug, when I press ctrl-s/ctrl-q for a
second is also still there:
3 4 47 45 0 1| 0 0 |7544B 10k| 0 0 | 971 1775
4 3 48 43 0 1| 040k|7854B 11k| 0 0 | 967 1784
File /usr/bin/dstat, line 1969, in ?
main()
File /usr/bin/dstat, line 1948, in main
sys.stdout.write('\n' + ansi['reset'] + ansi['clearline'] + ansi['save'])
IOError: [Errno 4] Interrupted system call
[Exit 1]
cerebro ~#
BTW:
I may have finally fixed this problem, but since I haven't seen it myself
it would be nice if someone who experienced it earlier can tell me if it
the xon/xoff problem should be really trivial to reproduce. unfortunately
it will be unrelated to the other problems above.
It seems none of the problems I have experienced in the older versions
have gone, but instead I got a new one: the new dstat corrupts my terminal
title without restoring it, so I'll go back to the old version until this
is fixed.
--
The choice of a
-==- _GNU_
==-- _ generation Marc Lehmann
---==---(_)__ __ __ [EMAIL PROTECTED]
--==---/ / _ \/ // /\ \/ / http://schmorp.de/
-=/_/_//_/\_,_/ /_/\_\ XX11-RIPE
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429637: krb5: [INTL:eu] debconf templates basque translation
Package: krb5 Severity: wishlist Tags: patch l10n Hi: Atached krb5 debconf templates basque first translation, please commit it. thx -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.21 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash # SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # Piarres Beobide [EMAIL PROTECTED], 2007. # msgid msgstr Project-Id-Version: krb5-debconf\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2007-06-18 15:23+0200\n PO-Revision-Date: 2007-06-19 11:06+0200\n Last-Translator: Piarres Beobide [EMAIL PROTECTED]\n Language-Team: Euskara [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Generator: Pootle 0.11\n #. Type: note #. Description #: ../krb5-admin-server.templates:2001 msgid Setting up a Kerberos Realm msgstr Kerberos eremu bat ezartzen #. Type: note #. Description #: ../krb5-admin-server.templates:2001 msgid This package contains the administrative tools required to run the Kerberos master server. msgstr Pakete honek Kerberos zerbitzari nagusia abiarazteko lanabes administratiboak ditu. #. Type: note #. Description #: ../krb5-admin-server.templates:2001 msgid However, installing this package does not automatically set up a Kerberos realm. This can be done later by running the \krb5_newrealm\ command. msgstr Hala ere, pakete hau instalatzeak ez du Kerberos eremu bat automatikoki konfiguratzen. Hori beranduago egin daiteke \krb5_newrealm\ komandoa erabiliaz. #. Type: note #. Description #: ../krb5-admin-server.templates:2001 msgid Please also read the /usr/share/doc/krb5-kdc/README.KDC file and the administration guide found in the krb5-doc package. msgstr Mesedez irakurri ere /usr/share/doc/krb5-kdc/README.KDC fitxategia eta krb5-doc paketean aurki daitekeen administrazio gidaliburua. #. Type: boolean #. Description #: ../krb5-admin-server.templates:3001 msgid Run the Kerberos V5 administration daemon (kadmind)? msgstr Kerberos 5 administrazio deabrua (kadmind) abiarazi? #. Type: boolean #. Description #: ../krb5-admin-server.templates:3001 msgid Kadmind serves requests to add/modify/remove principals in the Kerberos database. msgstr Kadmind-ek Kerberos datubaseko gehitze/eraldatze/ezabatze eskaera nagusiak zerbitzatzen ditu. #. Type: boolean #. Description #: ../krb5-admin-server.templates:3001 msgid It is required by the kpasswd program, used to change passwords. With standard setups, this daemon should run on the master KDC. msgstr Hau pasahitzak aldatzeko erabiltzen den kpasswd programaren eskakizun bat da. Konfigurazio estandarrarekin, deabru hau KDC nagusian abiarazi behar da. #. Type: boolean #. Description #: ../krb5-kdc.templates:2001 msgid Create the Kerberos KDC configuration automatically? msgstr Kerberos KDC konfigurazioa automatikoki sortu? #. Type: boolean #. Description #: ../krb5-kdc.templates:2001 msgid The Kerberos Domain Controller (KDC) configuration files, in /etc/krb5kdc, may be created automatically. msgstr Kerberos Domeinu Kontrolatzaile (KDC) konfigurazio fitxategiak, automatikoki sortuko dira /etc/krb5kdc direktorioan. #. Type: boolean #. Description #: ../krb5-kdc.templates:2001 msgid By default, an example template will be copied into this directory with local parameters filled in. msgstr Lehenespen bezala, parametro lokalak beterik dituen adibide txantiloi bat kopiatuko da direktorio horretan. #. Type: boolean #. Description #: ../krb5-kdc.templates:2001 msgid Administrators who already have infrastructure to manage their Kerberos configuration may wish to disable these automatic configuration changes. msgstr Kerberos konfigurazioa kudeatzeko azpiegitura duten kudeatzaileek konfigurazio aldaketa automatiko hauek ezgaitu nahi ditzakete. #. Type: select #. Choices #: ../krb5-kdc.templates:3001 msgid disable msgstr ezgaitu #. Type: select #. Choices #: ../krb5-kdc.templates:3001 msgid full msgstr osoa #. Type: select #. Choices #: ../krb5-kdc.templates:3001 msgid nopreauth msgstr ezaurreauten #. Type: select #. Choices #: ../krb5-kdc.templates:3001 msgid none msgstr batez #. Type: select #. Description #: ../krb5-kdc.templates:3002 msgid Kerberos V4 compatibility mode to use: msgstr Erabiliko den Kerberos 4 bateragarritasun modua: #. Type: select #. Description #: ../krb5-kdc.templates:3002 msgid By default, Kerberos V4 requests are allowed from principals that do not require preauthentication (\nopreauth\). This allows Kerberos V4 services to exist while requiring most users to use Kerberos V5 clients to get their initial tickets. These tickets can then be converted to Kerberos V4 tickets. msgstr Lehenespen bezala, Kerberos 4
Bug#429643: RM: libsasl2-gssapi-mit -- RoM; NBS
Package: ftp.debian.org Severity: normal libsasl2-gssapi-mit is a transition package in etch, and is not to exist in unstable anymore. It's not built from any source package, as it's superseded by libsasl-modules-gssapi-mit. I've been told that NBS packages show up in the dak cruft-report, but I can't seem to get that output and this package isn't in http://ftp-master.debian.org/rene-daily.txt although it does show up correctly in http://bjorn.haxx.se/debian/testing.pl?package=cyrus-sasl2 Please remove libsasl2-gssapi-mit from unstable. Thanks, -- Fabian Fagerholm [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429642: please update libkpathsea4-dev build-dependency
Package: cjk Version: 4.7.0+git20070504-2 Severity: normal User: [EMAIL PROTECTED] Usertags: eabi cjk build-depends on libkpathsea4-dev, which has been replaced with libkpathsea-dev in texlive. Please update build-dependency to match, as it seems sbuild gets's sometimes confused because of thise. ** Using build dependencies supplied by package: Build-Depends: debhelper (= 5.0.0), libkpathsea4-dev, ... ... Selecting previously deselected package libkpathsea4. Unpacking libkpathsea4 (from .../libkpathsea4_2007-11_armel.deb) ... Selecting previously deselected package libkpathsea-dev. Unpacking libkpathsea-dev (from .../libkpathsea-dev_2007-11_armel.deb) ... Checking correctness of source dependencies... After installing, the following source dependencies are still unsatisfied: libkpathsea4-dev(missing) Source-dependencies not satisfied; skipping cjk -- rm -rf only sounds scary if you don't have backups -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429472: ITA: speech-tools -- Edinburgh Speech Tools Library - developer's libraries and docs
retitle 429472 ITA: speech-tools -- Edinburgh Speech Tools Library - developer's libraries and docs owner 429472 ! thanks -- Kartik Mistry | Eng: kartikmistry.org/blog 0xD1028C8D | Guj: kartikm.wordpress.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#402249: Stable API now?
Hello, I'm also interested on libvirt and was going to produce the patch for libxen when I noticed this bug. Bastian, I'd like to know if you could do it now since 3.1 has release the 1.0 version of API and then it looks now these changes has calm down a bit. Can you merge Anibal's patch? -- O T A V I OS A L V A D O R - E-mail: [EMAIL PROTECTED] UIN: 5906116 GNU/Linux User: 239058 GPG ID: 49A5F855 Home Page: http://otavio.ossystems.com.br - Microsoft sells you Windows ... Linux gives you the whole house. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429437: new MAKEDEV usage chroot un friendly
On Tue, Jun 19, 2007 at 06:17:14PM +1000, Kel Modderman wrote: On Tue, 19 Jun 2007 08:38:30 am Ludovic RESLINGER wrote: Ok, but this is not a specific problem of libraw1394 in this case. No its not. irda-utils is another example. libraw1394 require /dev/MAKEDEV to create /dev/raw1394. If you use udev, you must activate and configure it before to install libraw1394. udev is not active in a chroot. It is not a solution to apply your patch because if /dev/MAKEDEV doesn't exist, /dev/raw1394 won't be created and libraw1394 won't work. I don't know how udev work in chroot, I think that you should ask it at udev's maitainer. Or your postinst could get smarter. Unconditionally calling cd /dev ./MAKEDEV *assumes* udev is active. That condition is not true in all cases. If you want use libraw1394, it is necessary to create /dev/raw1394 in all cases (in a native system or in a chroot). libraw1394 need makedev or udev. If udev is not installed, normaly, makedev is installed by default. I don't know why udev is not active is a chroot, you may ask that to Marco d'Itry, the udev's maintainer, but it must be active, else libraw1394 will not work. I think this is not a solution to make conditions in my postinst because if /dev/MAKEDEV is not found, /dev/raw1394 won't be create and libraw1394 won't work. Regards -- .---. Ludovic RESLINGER / \ [EMAIL PROTECTED]@./ Trumpet Student in CNR /`\_/`\ Free Software Developer // )X( \\ | \ : )|_ _,'| .''`. /`\_` _/ \ @==TTT=::_ | : :' : \__/'---'\__/ ((_=HHH___)) `.| `. `'` `---UUU---'= `- signature.asc Description: Digital signature
Bug#429402: lvm2: Please add LSB formatted dependency info in init.d script
In bug #429402, it was noted that the lvm2 script need to start after cryptdisks-early as well, and thus should list it in the should-start header. Here is an updated header to solve that. ### BEGIN INIT INFO # Provides: lvm # Required-Start:mountdevsubfs # Required-Stop: # Should-Start: udev devfsd raid2 mdadm cryptdisks-early # Should-Stop: reboot halt # Default-Start: S # Default-Stop: 0 6 ### END INIT INFO -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429583: ITP: powerpc-dtc -- PowerPC kernel device tree compiler
There are already source and binary packages for a tool called dtc, you will have to rename this. Maybe ppcdtc? In the logic of the kernel arch, it would better be have powerpc instead of ppc :) I'll rename the package to powerpc-dtc. I was unable to understand what the software does from its description, maybe you could mention what a device tree is, what the formats are (raw, flattened/blob), how dtc relates to OF, why the kernel needs it (kexec?), etc. ack. This serves me right for writing up an ITP when my significant other is summoning me to bed. Also, have you been in contact with Fredrik Roubert? He seems to have done Debian packages before. Indirectly, he seems to be an extern in our company Barco. As with most larger companies, the left hand doesn't know what the right hand is doing. There seems little point now, from what I have found, his diff is more or less the same as what I've done in parallel. -- greetz, marc Ladies, some decorum please. This is a peace memorial, let's not kill each other. Rygel - Different Destinations chiana 2.6.18-4-ixp4xx #1 Tue Mar 27 18:01:56 BST 2007 GNU/Linux signature.asc Description: Digital signature
Bug#427198: binNMU for vflib3 due to #426006
On Tue, Jun 19, 2007 at 11:08:06AM +0100, Lior Kaplan wrote: Steve Langasek wrote: No other packages seem to be affected. But I don't know why vflib3 needed rebuilt either, it doesn't seem to contain any .la files? Maybe a confusion between source and binary package names? No, an expectation that the binary package containing the .la file depended on libkpathsea4, which isn't necessarily true anyway. $ dpkg -S /usr/lib/libVFlib3.la vflib3-dev: /usr/lib/libVFlib3.la Might be a good idea to check other packages again... (If I was sure how, I would have done that myself). $ for F in `grep-dctrl -FDepends -n -sFilename libkpathsea-dev \ /var/lib/apt/lists/_mirror*_sid_*_Packages` do dpkg -c /mirror/$F | grep -q '\.la$' echo $F done pool/main/v/vflib3/vflib3-dev_3.6.13.dfsg-1_i386.deb So, there we are. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#424899: reproducing..
On Tue, 2007-06-19 at 10:45 +0100, Joey Hess wrote: I've found a fairly reliable way to reproduce this, I think. If I start a movie in mplayer, pause it, suspend, resume, suspend, and resume again, it seems to crash on that second resume (it crash on resume 50% of the time or so). This could be fixed by http://gitweb.freedesktop.org/?p=xorg/xserver.git;a=commitdiff;h=649e7f82d8d4333443493056b81eb20d6cf022bc nominated for the 1.3 branch. -- Earthling Michel Dänzer | http://tungstengraphics.com Libre software enthusiast | Debian, X and DRI developer
Bug#429648: click-paste
Package: screen-message Version: 0.5-1 Severity: normal I should be able to middle-click on the big text to paste into sm. Pasting works, if you carefully move the mouse to the small text input field at the bottom, but it would be nice to have this other abolity. I tend to keep sm running constantly while in conferences and just flip over to it and paste when I have something to show. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.21-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- see shy jo signature.asc Description: Digital signature
Bug#429646: stdin reading
Package: screen-message Version: 0.5-1 Severity: wishlist It's useful to feed multiline stuff to sm sometimes, and supporting a pipe or redurection from a file would be a nice feature to add. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.21-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- see shy jo signature.asc Description: Digital signature
Bug#360460: new upstream version timeframe?
On Mon, Jun 18, 2007 at 04:55:10PM -0700, Ivan Kohler wrote: Now that we're post-etch, updating this bug with any current information from the PAM team on when/if PAM will be updated in sid in preparation for lenny would be very useful. Folks who may have a need for the new features can plan on workarounds if a PAM update is not expected for our next stable release. For example, I maintain the libpam-unix2 PAM module which will require some extra work to be compaible with our current old PAM version. If a core PAM upgrade is happening at some point, it may not worthwhile to do this work. On the other hand, if a core PAM upgrade is some time away or not happening for lenny, I will probably downgrade the package or do the extra compatibility work. Thanks for any information you can provide. It will happen for lenny. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#418791:
Hi, I don't really like RFAs send by third parties but given that you didn't answer so far I take it this is serious. I will try to look into the package a bit while here at DebConf. Michael -- Michael Meskes Email: Michael at Fam-Meskes dot De ICQ: 179140304, AIM/Yahoo: michaelmeskes, Jabber: [EMAIL PROTECTED] Go SF 49ers! Go Rhein Fire! Use Debian GNU/Linux! Use PostgreSQL!
Bug#427198: binNMU for vflib3 due to #426006
Steve Langasek wrote: No other packages seem to be affected. But I don't know why vflib3 needed rebuilt either, it doesn't seem to contain any .la files? Maybe a confusion between source and binary package names? $ dpkg -S /usr/lib/libVFlib3.la vflib3-dev: /usr/lib/libVFlib3.la Might be a good idea to check other packages again... (If I was sure how, I would have done that myself). -- Lior Kaplan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429647: madwifi-source: please package version 0.9.30.13 (for experimental?)
Package: madwifi-source Version: 0.9.3-2 Severity: wishlist Hello, for the Apple MacBooks and Apple MacBooksPro we need a newer version to get the wireless working. This snapshot has support for the card and works good: http://snapshots.madwifi.org/madwifi-hal-0.9.30.13-current.tar.gz -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: powerpc (ppc) Kernel: Linux 2.6.18-4-powerpc Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429583: ITP: dtc -- PowerPC kernel device tree compiler
On Mon, Jun 18, 2007, Marc Leeman wrote: Version : 20070523 Upstream Author : Jon Loeliger * URL : git://www.jdl.com/software/dtc.git * License : GPL Programming Lang: C Description : PowerPC kernel device tree compiler dtc basically takes a device-tree in a given format and outputs a device-tree in another format. There are already source and binary packages for a tool called dtc, you will have to rename this. Maybe ppcdtc? I was unable to understand what the software does from its description, maybe you could mention what a device tree is, what the formats are (raw, flattened/blob), how dtc relates to OF, why the kernel needs it (kexec?), etc. Also, have you been in contact with Fredrik Roubert? He seems to have done Debian packages before. Cheers, -- Sam. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429645: ssh-add: man page is not clear about passphrase querying
Package: openssh-client Version: 1:4.3p2-11 Severity: normal SSH_ASKPASS is unset and I get: vin:~ ssh-add Enter passphrase for /home/vlefevre/.ssh/id_rsa: vin:~ ssh-add /dev/null - A graphical dialog appears, but the ssh-add(1) man page doesn't document this feature (I recall that SSH_ASKPASS is unset). vin:~ unset DISPLAY vin:~ ssh-add /dev/null Enter passphrase for /home/vlefevre/.ssh/id_rsa: This is inconsistent with the first two cases. The man page doesn't say when the terminal has the precedence over the graphical program. Note that ssh behaves differently: vin:~ /usr/bin/ssh ble /dev/null Pseudo-terminal will not be allocated because stdin is not a terminal. Enter passphrase for key '/home/vlefevre/.ssh/id_rsa': -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-686-bigmem (SMP w/2 CPU cores) Locale: LANG=POSIX, LC_CTYPE=en_US.ISO8859-1 (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages openssh-client depends on: ii adduser 3.102 Add and remove users and groups ii debconf 1.5.13 Debian configuration management sy ii dpkg 1.14.4 package maintenance system for Deb ii libc62.5-11 GNU C Library: Shared libraries ii libcomer 1.39+1.40-WIP-2007.04.07+dfsg-2 common error description library ii libedit2 2.9.cvs.20050518-3 BSD editline and history libraries ii libkrb53 1.6.dfsg.1-4MIT Kerberos runtime libraries ii libncurs 5.6-3 Shared libraries for terminal hand ii libssl0. 0.9.8e-5SSL shared libraries ii passwd 1:4.0.18.1-9change and administer password and ii zlib1g 1:1.2.3-15 compression library - runtime openssh-client recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429642: please update libkpathsea4-dev build-dependency
Hi! On 19-06-07 11:48, Riku Voipio wrote: Package: cjk Version: 4.7.0+git20070504-2 Severity: normal User: [EMAIL PROTECTED] Usertags: eabi cjk build-depends on libkpathsea4-dev, which has been replaced with libkpathsea-dev in texlive. Please update build-dependency to match, as it seems sbuild gets's sometimes confused because of thise. I already uploaded a new source package to my sponsor, but he hasn't had time yet to upload it to Debian. You can find the source packages here: http://chinese.alioth.debian.org/latex-cjk/cjk_4.7.0+git20070504-3.diff.gz http://chinese.alioth.debian.org/latex-cjk/cjk_4.7.0+git20070504-3.dsc http://chinese.alioth.debian.org/latex-cjk/cjk_4.7.0+git20070504.orig.tar.gz Thank you for your bugreport! -- Danai SAE-HAN (韓達耐) -- 題目:《橫塘》 作者:范成大（１１２６－１１９３） 南浦春來綠一川，石橋朱塔兩依然。 年年送客橫塘路，細雨垂楊系畫船。 signature.asc Description: OpenPGP digital signature
Bug#429471: ITA: festival-doc -- Documentation for Festival
retitle 429471 ITA: festival-doc -- Documentation for Festival owner 429471 ! thanks -- Kartik Mistry | Eng: kartikmistry.org/blog 0xD1028C8D | Guj: kartikm.wordpress.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429470: ITA: festival -- general multi-lingual speech synthesis system
retitle 429470 ITA: festival -- general multi-lingual speech synthesis system owner 429470 ! thanks -- Kartik Mistry | Eng: kartikmistry.org/blog 0xD1028C8D | Guj: kartikm.wordpress.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#348676: dstat: option to not change xterm title
On Tue, Jun 19, 2007 at 11:31:10AM +0200, Marc Lehmann wrote: Come on folks, this is a BUG, not a wishlist item. It destroys a setting a user has made without asking. How it works in Bash is that the PROMPT_COMMAND contains the escape This is complete and utter bullshit. PROMPT_COMMAND does exactly what it does, namely exactly what the user configured it to do. Changing the title is not a bash feature in any way, it is completely unrelated to bash. Less anger :-) fwiw, I'm inclined to agree with you, changing the xterm's title is somewhat obnoxious, and from my research, there appears to be no way to retrieve the current title, so there's no way to restore it after changing. Relying on the user's environment to re-overwrite the title after termination is, well, relying on hope too much, because there's no reliable way to ensure that this is going to happen. Dag, I think you need to consider your users some more. The current title you set doesn't really buy the user a lot, so I think given we've got at least one user who's rather passionately against it (and it's bitten me more than once before as well), I think I'll patch it out of the Debian package. regards Andrew signature.asc Description: Digital signature
Bug#429650: ttf-gentium: please do not include the fontconfig snippet
Package: ttf-gentium Version: 1.02-2 Severity: normal Tags: l10n The fontconfig snippet should not be in the package. It is being prepared for upstream inclusion. It is also under a different license. The pkg-fonts svn on Alioth holds the fixed version. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.21-1-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages ttf-gentium depends on: ii defoma 0.11.10-0.1 Debian Font Manager -- automatic f Versions of packages ttf-gentium recommends: ii fontconfig2.4.2-1.2 generic font configuration library ii x-ttcidfont-conf 25.1 Configure TrueType and CID fonts f -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429649: bts should cc bugnum when sending control message if it contains a comment
Package: devscripts Version: 2.10.4 Severity: normal Consensus relayed from the DC7 debbugs BoF: If a comment is included in a control message, bts should cc the affected bug(s) when sending the mail to [EMAIL PROTECTED] The rationalle is that it's currently too easy to miss a commented message to control, since control messages are intentionally well-hidden in the web interface. So ccing the control message to the bug is best practice, if the control message has some useful comment in it. So bts should do this by default. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.21-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages devscripts depends on: ii debianutils 2.21 Miscellaneous utilities specific t ii dpkg-dev 1.14.4 package building tools for Debian ii libc6 2.5-10 GNU C Library: Shared libraries ii perl 5.8.8-7Larry Wall's Practical Extraction ii sed 4.1.5-2The GNU sed stream editor Versions of packages devscripts recommends: ii fakeroot 1.7.1 Gives a fake root environment -- no debconf information -- see shy jo signature.asc Description: Digital signature
Bug#429617: exim4-config fails to install with postinst trouble
I am finding the same, or very similar. This is the result of aptitude upgrade or (subsequently) aptitude install exim4-config: E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up exim4-config (4.67-3) ... 2007-06-19 11:12:16 Exim configuration error in line 28 of /var/lib/exim4/config.autogenerated.tmp: malformed macro definition Invalid new configfile /var/lib/exim4/config.autogenerated.tmp not installing /var/lib/exim4/config.autogenerated.tmp to /var/lib/exim4/config.autogenerated dpkg: error processing exim4-config (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of exim4-base: exim4-base depends on exim4-config (= 4.30) | exim4-config-2; however: Package exim4-config is not configured yet. Package exim4-config-2 is not installed. Package exim4-config which provides exim4-config-2 is not configured yet. dpkg: error processing exim4-base (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of exim4-daemon-heavy: exim4-daemon-heavy depends on exim4-base (= 4.67); however: Package exim4-base is not configured yet. dpkg: error processing exim4-daemon-heavy (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of eximon4: eximon4 depends on exim4-base (= 4.10); however: Package exim4-base is not configured yet. dpkg: error processing eximon4 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of exim4: exim4 depends on exim4-base (= 4.67); however: Package exim4-base is not configured yet. exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however: Package exim4-daemon-light is not installed. Package exim4-daemon-heavy is not configured yet. Package exim4-daemon-custom is not installed. dpkg: error processing exim4 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: exim4-config exim4-base exim4-daemon-heavy eximon4 exim4 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429652: cdebootstrap and configuration file support to qemu-make-debian-root
Package: qemu Version: 0.9.0-2 Severity: wishlist hi, it could be nice to add cdebootstrap and configuration file support to qemu-make-debian-root. The configuration file could tell which binary to use (cdeboostrap | deboostrap) and can help to override some values like files to exclude or packages to remove, etc... cheers, Fathi
Bug#429651: iceweasel: Firefox doesn't show main window when pseudo-xinerama is enabled with mergedfb
Package: iceweasel Version: 2.0.0.4-1 Severity: normal See https://bugzilla.mozilla.org/show_bug.cgi?id=385009 -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.19.1 (PREEMPT) Locale: LANG=POSIX, [EMAIL PROTECTED] (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash Versions of packages iceweasel depends on: ii debianutils 2.21 Miscellaneous utilities specific t ii fontconfig 2.4.2-1.2generic font configuration library ii libatk1.0-0 1.18.0-2 The ATK accessibility toolkit ii libc6 2.5-11 GNU C Library: Shared libraries ii libcairo2 1.4.6-1.1The Cairo 2D vector graphics libra ii libfontconfig1 2.4.2-1.2generic font configuration library ii libfreetype62.2.1-6 FreeType 2 font engine, shared lib ii libgcc1 1:4.2-20070609-1 GCC support library ii libglib2.0-02.12.12-1The GLib library of C routines ii libgtk2.0-0 2.10.13-1The GTK+ graphical user interface ii libhunspell-1.1-0 1.1.5-6 spell checker and morphological an ii libjpeg62 6b-13The Independent JPEG Group's JPEG ii libnspr4-0d 4.6.6-3 NetScape Portable Runtime Library ii libnss3-0d 3.11.5-3 Network Security Service libraries ii libpango1.0-0 1.16.4-1 Layout and rendering of internatio ii libpng12-0 1.2.15~beta5-2 PNG library - runtime ii libstdc++6 4.2-20070609-1 The GNU Standard C++ Library v3 ii libx11-62:1.0.3-7X11 client-side library ii libxft2 2.1.12-2 FreeType-based font drawing librar ii libxinerama11:1.0.2-1X11 Xinerama extension library ii libxp6 1:1.0.0.xsf1-1 X Printing Extension (Xprint) clie ii libxrender1 1:0.9.2-1X Rendering Extension client libra ii libxt6 1:1.0.5-3X11 toolkit intrinsics library ii psmisc 22.5-1 Utilities that use the proc filesy ii zlib1g 1:1.2.3-15 compression library - runtime iceweasel recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429653: Xalan build-depends on removed apache-dev
Package: xalan Version: 1.10-3 Severity: serious Due to the recent removal of apache (including it's accompanied packages of apache-common, apache-dbg, apache-dev, apache-doc, apache-perl and apache-ssl) and libapache-mod-perl your package most propably isn't able to get installed or built anymore. These are the problems your package currently has: Build-Depends: debhelper (= 4.1.0), doxygen, libxerces27-dev (= 2.7.0-1), apache-dev (= 1.3.6-2) Please either send the ftp team a removal request for your package if it isn't able to work with apache2, or update it to build (only) packages for apache2. -- rm -rf only sounds scary if you don't have backups -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429654: ITP: gmotionlive -- A simple multipart/x-mixed-replace viewer
Package: wnpp Severity: wishlist Owner: Maximiliano Curia [EMAIL PROTECTED] * Package name: gmotionlive Version : 1.0.0 Upstream Author : Jeroen Vreeken [EMAIL PROTECTED] * URL : http://gate.vitsch.net/~pe1rxq/gmotionlive * License : GPLv2 Programming Lang: C Description : A simple multipart/x-mixed-replace viewer gmotionlive is a simple gtk viewer for streaming webcams that use multipart/x-mixed-replace streams. . It was written for viewing streams from the motion program. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-amd64 Locale: LANG=es_AR.UTF-8, LC_CTYPE=es_AR.UTF-8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429655: gpscorrelate: Fails to read GPX file produced by GlobalSat DataLogger PC Utility
Package: gpscorrelate Version: 1.5-1+b2 Severity: important gpscorrelate --gps ~/somewhere.gpx --verbose --no-write IMG_0007.JPG EXIF-GPS Photo matching program. Daniel Foote, 2005. Reading GPS Data... Failure reading/processing GPS data. A more descriptive error message would be appreciated... Here is the GPX file: ?xml version=1.0? gpx version=1.0 creator=GlobalSat DG100 PC Software xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance; xmlns=http://www.topografix.com/GPX/1/0; xsi:schemaLocation=http://www.topografix.com/GPX/1/0 http://www.topografix.com/GPX/1/0/gpx.xsd; trk name001,2007-06-10:15:56:06/name trkseg trkpt lat=49.40013 lon= 9.50536time2007-06-10T13:56:06Z/time/trkpt /trkseg /trk /gpx The original had DOS lineends and a missing lineend at the end of the file. Correcting those made no difference. I processed the data with gpsbabel -D 9 -i gpx -o gpx, also no dice. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (100, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-k7 (SMP w/1 CPU core) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages gpscorrelate depends on: ii libc6 2.5-9+b1 GNU C Library: Shared libraries ii libexiv2-0 0.14-1 EXIF/IPTC metadata manipulation li ii libgcc1 1:4.2-20070528-1 GCC support library ii libstdc++6 4.2-20070528-1 The GNU Standard C++ Library v3 ii libxml2 2.6.28.dfsg-1GNOME XML library gpscorrelate recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429657: gcc-4.1: optimisation bug abs() in nested if
Package: gcc-4.1
Version: 4.1.1-21
Severity: normal
abuse-sdl-0.7.0 has a gun aiming problem due to a mis-optimisation.
attached is a canned example.
(compile with -01 and -02 and compare the differences)
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (990, 'stable'), (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=en_NZ, LC_CTYPE=en_NZ (charmap=ISO-8859-1)
Versions of packages gcc-4.1 depends on:
ii binutils 2.17cvs20070426-8 The GNU assembler, linker and bina
ii cpp-4.14.1.1-21 The GNU C preprocessor
ii gcc-4.1-base 4.1.1-21 The GNU Compiler Collection (base
ii libc6 2.5-9+b1 GNU C Library: Shared libraries
ii libgcc11:4.1.1-21GCC support library
ii libssp04.1.1-21 GCC stack smashing protection libr
Versions of packages gcc-4.1 recommends:
ii libc6-dev 2.5-9+b1 GNU C Library: Development Librari
pn libmudflap0-dev none (no description available)
-- no debconf information
// example of GCC 4.1 optimisation bug
// compile with -01 and -02 and compare the differences
// licence is GPL2 - based on code taken from abuse-sdl
// gcc -o bad example.c -O2 -lm
// gcc -o good example.c -O1 -lm
#include stdio.h
#include math.h
unsigned short atan_table[1662]={
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 5,
6, 6, 7, 8, 9, 9, 10, 11, 11, 12, 12, 13,
13, 14, 14, 15, 15, 16, 16, 17, 17, 18, 18, 18,
19, 19, 19, 20, 20, 20, 21, 21, 21, 22, 22, 22,
23, 23, 23, 23, 24, 24, 24, 24, 25, 25, 25, 25,
25, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 28,
28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29,
29, 30, 30, 30, 30, 30, 30, 30, 30, 31, 31, 31,
31, 31, 31, 31, 31, 31, 32, 32, 32, 32, 32, 32,
32, 32, 32, 32, 32, 33, 33, 33, 33, 33, 33, 33,
33, 33, 33, 33, 33, 33, 34, 34, 34, 34, 34, 34,
34, 34, 34, 34, 34, 34, 34, 34, 34, 35, 35, 35,
35, 35, 35, 35, 35, 35, 35, 35, 35, 35, 35, 35,
35, 35, 35, 35, 36, 36, 36, 36, 36, 36, 36, 36,
36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
36, 36, 36, 37, 37, 37, 37, 37, 37, 37, 37, 37,
37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, 37,
37, 37, 37, 37, 37, 37, 37, 37, 37, 38, 38, 38,
38, 38, 38, 38, 38, 38, 38, 38, 38, 38, 38, 38,
38, 38, 38, 38, 38, 38, 38, 38, 38, 38, 38, 38,
38, 38, 38, 38, 38, 38, 38, 38, 38, 38, 38, 38,
39, 39, 39, 39, 39, 39, 39, 39, 39, 39, 39, 39,
39, 39, 39, 39, 39, 39, 39, 39, 39, 39, 39, 39,
39, 39, 39, 39, 39, 39, 39, 39, 39, 39, 39, 39,
39, 39, 39, 39, 39, 39, 39, 39, 39, 39, 39, 39,
39, 39, 39, 39, 39, 39, 39, 39, 40, 40, 40, 40,
40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
40, 40, 40, 40, 40, 40, 40, 41, 41, 41, 41, 41,
41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
41, 41, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42,
42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42,
42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42,
42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42,
42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42,
42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42,
42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42,
42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42,
42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42,
42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42,
Bug#368010: pwgen: please upload the fix proposed in the thread of the bug
Package: pwgen Version: 2.05-1 Followup-For: Bug #368010 could you please upload the fix and the sevirity is grave in my opinion: i tried to automatically create passwords in a script, and so there can be severe security problem if i hadnt checked the output by hand since it created both empty and numerous one char paswords that are not secure at all. my call was: pwgen -cnsB 12 1 which results to for example [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 4smE [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 J [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 d [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 ot7yagRYkTxq [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 oR [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 pnrRNJyowF [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 XMyU [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 3Un7 [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 v9EeNHfRv3LP [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 Jc9H9a [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 upfchLEWkCc4 [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 eU3qE [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 [EMAIL PROTECTED]:~] pwgen -cnsB 12 1 3u3NfAe when called directly in the shell yours albert -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.21.1 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages pwgen depends on: ii libc6 2.5-11 GNU C Library: Shared libraries pwgen recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#425893: k3d: FTBFS with new boost libraries
El martes, 19 de junio de 2007, Sune Vuorela escribió: Hi! I took a quick look at this bug - but I only got partly thru. The autoconf tests fails because the names of the symlinks have been changed. Every occurency of -lboost_foo or boost_foo in m4/k3d_with_external_boost.m4 should be replaged with either -lboost_foo-mt / boost_foo-mt (Or the -st versions) and autoconf rerun. The autoconf now finds boost properly, but it fails unfortunately later when boost is actually used. Around here I gave up Do not worry, Sune. I was playing with boost a couple of days ago and I suffered the new and shiny and incompatible boost 1.34. I will try to sort out the building errors. Best regards, Ender. -- Network engineer Debian Developer signature.asc Description: This is a digitally signed message part.
Bug#429658: python-apt: DebianDistribution class misses method used by SoftwareProperties
Package: python-apt
Version: 0.7.2
Severity: important
Hello!
I'm packaging SoftwareProperties for Debian, and noticed that it uses a
method called get_server_list in the ${NAME}Distribution class of the
distribution it is running on, and which is in aptsources/distro.py.
I wrote a proposed patch that generalizes get_server_list and also
get_mirrors, but forces the customization of _get_mirror_name. It seems
to work, but notice that I'm not familiar with the code yet. Please consider
applying this patch, or a reworked version, please =).
See you,
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.21-1-686 (SMP w/2 CPU cores)
Locale: LANG=pt_BR.UTF-8, LC_CTYPE=pt_BR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages python-apt depends on:
ii apt [libapt-pkg-libc6.5 0.7.2Advanced front-end for dpkg
ii apt-utils [libapt-inst- 0.7.2APT utility programs
ii libc6 2.5-11 GNU C Library: Shared libraries
ii libgcc1 1:4.2-20070609-1 GCC support library
ii libstdc++6 4.2-20070609-1 The GNU Standard C++ Library v3
ii lsb-release 3.1-23.1 Linux Standard Base version report
ii python 2.4.4-6 An interactive high-level object-o
ii python-central 0.5.14 register and build utility for Pyt
python-apt recommends no packages.
-- no debconf information
diff -Nru --exclude '*.mo' --exclude '*.po' --exclude '*.pot'
/tmp/KKyGU72DhZ/python-apt-0.7.2/aptsources/distro.py
/tmp/cEKADQ0COl/python-apt-0.7.2.1/aptsources/distro.py
--- /tmp/KKyGU72DhZ/python-apt-0.7.2/aptsources/distro.py 2007-06-10
23:21:25.0 +0100
+++ /tmp/cEKADQ0COl/python-apt-0.7.2.1/aptsources/distro.py 2007-06-19
12:16:52.0 +0100
@@ -131,7 +131,7 @@
self.get_mirrors()
- def get_mirrors(self):
+ def get_mirrors(self, mirror_template=None):
Provide a set of mirrors where you can get the distribution from
@@ -149,6 +149,97 @@
else:
self.default_server = self.main_sources[0].uri
+# get a list of country codes and real names
+self.countries = {}
+try:
+f = open(/usr/share/iso-codes/iso_3166.tab, r)
+lines = f.readlines()
+for line in lines:
+parts = line.split(\t)
+self.countries[parts[0].lower()] = parts[1].strip()
+except:
+print could not open file '%s' % file
+else:
+f.close()
+
+# try to guess the nearest mirror from the locale
+self.country = None
+self.country_code = None
+locale = os.getenv(LANG, default=en.UK)
+a = locale.find(_)
+z = locale.find(.)
+if z == -1:
+z = len(locale)
+country_code = locale[a+1:z].lower()
+
+if mirror_template:
+ self.nearest_server = mirror_template % country_code
+
+if self.countries.has_key(country_code):
+self.country = self.countries[country_code]
+self.country_code = country_code
+
+ def _get_mirror_name(self, server):
+ ''' Try to get a human readable name for the main mirror of a country
+ Customize for different distributions '''
+ country = None
+ i = server.find(://)
+ l = server.find(.archive.ubuntu.com)
+ if i != -1 and l != -1:
+ country = server[i+len(://):l]
+ if self.countries.has_key(country):
+ # TRANSLATORS: %s is a country
+ return _(Server for %s) % \
+ gettext.dgettext(iso_3166,
+ self.countries[country].rstrip()).rstrip()
+ else:
+ return(%s % server.rstrip(/ ))
+
+ def get_server_list(self):
+''' Return a list of used and suggested servers '''
+def compare_mirrors(mir1, mir2):
+'''Helper function that handles comaprision of mirror urls
+ that could contain trailing slashes'''
+return re.match(mir1.strip(/ ), mir2.rstrip(/ ))
+
+# Store all available servers:
+# Name, URI, active
+mirrors = []
+if len(self.used_servers) 1 or \
+ (len(self.used_servers) == 1 and \
+compare_mirrors(self.used_servers[0], self.main_server)):
+mirrors.append([_(Main server), self.main_server, True])
+mirrors.append([self._get_mirror_name(self.nearest_server),
+ self.nearest_server, False])
+elif len(self.used_servers) == 1 and not \
+ compare_mirrors(self.used_servers[0], self.main_server):
+mirrors.append([_(Main server), self.main_server, False])
+# Only one server is used
+server = self.used_servers[0]
+
+# Append the nearest server if it's not already used
+if not compare_mirrors(server, self.nearest_server):
+mirrors.append([self._get_mirror_name(self.nearest_server),
+
Bug#426939: split acpi-support into more than one package
tags 426939 wontfix thanks I'd rather improve the organization of the package (which it definitely needs) than splitting it up. You see, it's not a large package, it's just a bit disorganized. And that's the fault of upstream (which is Ubuntu). Anyway, I want to avoid at all cost that the user needs to manually select the right package for his/her laptop to work. The only problem here is really that these files are in the config directory, while they really contain package code. I'd much rather fix that instead. Thanks for your time. -- .''`. martin f. krafft [EMAIL PROTECTED] : :' : proud Debian developer, author, administrator, and user `. `'` http://people.debian.org/~madduck - http://debiansystem.info `- Debian - when you have better things to do than fixing systems signature.asc Description: Digital signature (GPG/PGP)
Bug#424597: NMU uploaded
Hi, I uploaded an NMU of your package. Please see this as help to get the package into a releaseable condition again. Please find the used diff below. Cheers, Andi diff -Nur af-2.4.3~/debian/changelog af-2.4.3/debian/changelog --- af-2.4.3~/debian/changelog 2007-06-19 11:29:29.0 + +++ af-2.4.3/debian/changelog 2007-06-19 11:29:02.0 + @@ -1,3 +1,10 @@ +af (2.4.3-3.1) unstable; urgency=medium + + * Non-maintainer upload. + * Fix FTBFS. Thanks, Florent Bayle. Closes: #424597 + + -- Andreas Barth [EMAIL PROTECTED] Tue, 19 Jun 2007 11:28:43 + + af (2.4.3-3) unstable; urgency=low * Fixed gcc-3.5/4.0 malloc redeclaration (closes: #258511, #289854) diff -Nur af-2.4.3~/src/files.c af-2.4.3/src/files.c --- af-2.4.3~/src/files.c 2003-11-27 01:49:02.0 + +++ af-2.4.3/src/files.c2007-06-19 11:28:38.0 + @@ -53,10 +53,11 @@ extern char *get_user(), *get_home(), *get_pwd(), *get_vtext(); extern char *get_mailbox(), *typeonly(), *decode_header_line(); extern char *get_line(); -extern int readlink(), strncasecmp(), get_vval(), listed(); +extern int strncasecmp(), get_vval(), listed(); extern int is_header(), is_blank(), close_folder(), touch_folder(); extern int viewable_ctype(), viewable_charset(); extern int write_decoded_text(); +extern ssize_t readlink(); extern void free(), msgl(), emsgl(), cmsg(), abort_folder(); extern FILE *open_folder(); extern DATEZONE *date_now(); -- http://home.arcor.de/andreas-barth/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#407945: abuse: aiming goes crazy in left, and down, quadrant
On Sun, Jun 17, 2007 at 01:03:03PM +, Debian Bug Tracking System wrote:
it seems to be a gcc optimisation bug in lisp_atan2()
(found in src/lisp.cpp)
compiling that file with -O0 instead of -O2 fixes it.
attached is a modified lisp_atan2() that gcc has no problems with.
(this one works OK if compiled with -02)
FWIW$ gcc --version
gcc (GCC) 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
I've reporting the bug in gcc
Bye.
Jasen
long lisp_atan2(long dy, long dx)
{
if (dy==0)
{
if (dx0) return 0;
else return 180;
} else if (dx==0)
{
if (dy0) return 90;
else return 270;
} else
{
if (dx0)
{
if (dy0)
{
if ((dx)(dy))
{
long a=dx*29/dy;
if (a=TBS) return 0;
else return 45-atan_table[a];
}
else
{
long a=dy*29/dx;
if (a=TBS) return 90;
else return 45+atan_table[a];
}
} else // dy 0
{
if ((dx)(-dy))
{
long a=dx*29/(-dy);
if (a=TBS)
return 0;
else
return 315+atan_table[a];
}
else
{
long a=(-dy)*29/dx;
if (a=TBS)
return 260;
else
return 315-atan_table[a];
}
}
} else // dx 0
{
if (dy0)
{
if ((-dx)(dy))
{
long a=-dx*29/dy;
if (a=TBS)
return 135+45;
else
return 135+atan_table[a];
}
else
{
long a=dy*29/-dx;
if (a=TBS)
return 135-45;
else
return 135-atan_table[a];
} // dy 0
} else
{
if ((-dx)(-dy))
{
long a=-dx*29/(-dy);
if (a=TBS)
return 225-45;
else return 225-atan_table[a];
}
else
{
long a=(-dy)*29/(-dx);
if (a=TBS)
return 225+45;
else return 225+atan_table[a];
}
}
}
}
}
Bug#429660: g++-4.2: program using locales segfaults when compile with locales
Package: g++-4.2
Version: 4.2-20070609-1
Severity: normal
The sample program below segfaults.
#include stdexcept
#include iostream
#include locale
int main (int argc, char **argv) {
try {
std::locale::locale(ja_JP.UTF-8);
} catch (const std::runtime_error err) {
std::cerr err.what() '\n';
}
}
Of course I have generated the ja_JP.UTF-8 locale.
Since my mother language is Japanese, I
use my computer with the locale every day.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.20-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=ja_JP.UTF-8, LC_CTYPE=ja_JP.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages g++-4.2 depends on:
ii gcc-4.2 4.2-20070609-1 The GNU C compiler
ii gcc-4.2-base 4.2-20070609-1 The GNU Compiler Collection (base
ii libc6 2.5-11 GNU C Library: Shared libraries
ii libstdc++6-4.2-dev4.2-20070609-1 The GNU Standard C++ Library v3 (d
g++-4.2 recommends no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429181: update-manager_0.59.20-1(experimental/powerpc/anakreon): fdsend.c:26:20: error: Python.h: No such file or directory
Em Seg, 2007-06-18 às 18:06 +0100, Gustavo Noronha Silva escreveu: Em Sáb, 2007-06-16 às 12:09 +0200, Loïc Minier escreveu: Was waiting on the 0.7.2 APT upload to unstable; I'd like to upload this into unstable proper already. Will do this today, as my sencond upload at debconf =) Upload to unstable will have to wait, though =(. There are still some things to sort out. I'll upload to experimental today. -- Gustavo Noronha Silva [EMAIL PROTECTED] http://people.debian.org/~kov/
