Bug#684352: HP Pavilion dv4000: Wifi kill switch always on unless ACPI=off is used
Also note that my PC is a Compaq Presario V4000T, it shares a lot of the same hardware as the HP Pavillion DV4000, but there are some hardware differences\. They *might* be using the same BIOS,, I really don't know. They do share the same service/repair manual but they have different replacement part#s. Not sure if that's important for you or not. On Sun, Sep 30, 2012 at 8:31 AM, Jonathan Nieder jrnie...@gmail.com wrote: Hi David, David Smith wrote: Hardware: 6-year old laptop with Pentium-M CPU and Intel 2200 wireless. This is a problem that just started happening after I updated to Wheezy. When I boot my PC with the default Debian kernel for Wheezy and the ipw2x00 firmware package, I get a message saying my wireless killswitch is on. Pressing the Wifi button on my laptop and rebooting gives the same results. I pressed the Wifi button and it doesn't light up like it did in Squeeze or Lenny. The button stays dark. [...] When I turn off the Wifi using the network-manager-kde tool, rfkill then shows this: Miho:/home/david# rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes Miho:/home/david# [...] However, using rfkill unblock all results in this: [...] I can then turn the wifi on again in network-manager-kde and connect to a network in the network-manager-kde tool because it thinks the wifi is no longer hardware blocked. [...] [3.546082] ipw2200: Radio Frequency Kill Switch is On: [3.546084] Kill switch must be turned off for wireless networking to work. Thanks for reporting it, and sorry for the slow response. Some ideas: - please attach acpidump output. - am I correct in imagining 3.5.y from experimental behaves the same way? - does the squeeze (2.6.32.y) kernel avoid trouble? It should work fine on a wheezy/sid system. Next step will be to take this upstream, but let's try to figure out what caused the regression (e.g., which subsystem) first. Hope that helps, Jonathan -- To unsubscribe, send mail to 684352-unsubscr...@bugs.debian.org.
Bug#689196: cifs-utils: mount.cifs causes kernel crash
Package: cifs-utils Version: 2:5.5-1 Severity: important Dear Maintainer, recently my computer stops with kernel crash screen. * What led up to the situation? No user-interaction. * What exactly did you do (or not do) that was effective (or ineffective)? Nothing yet * What was the outcome of this action? * What outcome did you expect instead? /var/log/messages: Sep 30 07:44:02 computer kernel: [ 900.486399] FS-Cache: Netfs 'cifs' registered for caching Sep 30 07:44:02 computer kernel: [ 900.507365] CPU 1 Sep 30 07:44:02 computer kernel: [ 900.507387] Modules linked in: hmac cifs mmc_block snd_hrtimer cpufreq_userspace cpufreq_stats cpufreq_conservative cpufreq_powersave parport_pc ppdev lp parport rfcomm bnep binfmt_misc uinput fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc nls_utf8 nls_cp437 vfat fat loop firewire_sbp2 sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod arc4 joydev uvcvideo videodev v4l2_compat_ioctl32 media usbhid hid iwlwifi i915 btusb bluetooth snd_hda_codec_hdmi r852 sm_common nand nand_ecc nand_ids drm_kms_helper drm acpi_cpufreq r592 asus_laptop mtd mperf memstick snd_hda_codec_conexant coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer sparse_keymap snd mac80211 cfg80211 soundcore rfkill ac iTCO_wdt iTCO_vendor_support psmouse serio_raw battery power_supply video input_polldev evdev processor i2c_algo_bit i2c_core button ext4 crc16 jbd2 mbcache sg sd_mod crc_t10dif sr_mod cdrom ahci libahci uhci_hcd ehci_hcd firewire Sep 30 07:44:02 computer kernel: _ohci libata thermal thermal_sys sdhci_pci sdhci mmc_core firewire_core crc_itu_t r8169 mii scsi_mod usbcore usb_common [last unloaded: scsi_wait_scan] Sep 30 07:44:02 computer kernel: [ 900.508441] Sep 30 07:44:02 computer kernel: [ 900.508455] Pid: 8006, comm: mount.cifs Not tainted 3.2.0-3-amd64 #1 LENOVO.273852G/273852G Sep 30 07:44:02 computer kernel: [ 900.508535] RIP: 0010:[811897d7] [811897d7] crypto_larval_kill+0x1e/0x57 Sep 30 07:44:02 computer kernel: [ 900.508600] RSP: 0018:88007a3b5b98 EFLAGS: 00010246 Sep 30 07:44:02 computer kernel: [ 900.508638] RAX: dead00200200 RBX: 880078bac000 RCX: 0246 Sep 30 07:44:02 computer kernel: [ 900.508685] RDX: dead00100100 RSI: 880078bac000 RDI: 81636490 Sep 30 07:44:02 computer kernel: [ 900.508733] RBP: 880032a30c50 R08: 88007a3b4000 R09: Sep 30 07:44:02 computer kernel: [ 900.508780] R10: 88004d29d160 R11: 88004d29d160 R12: Sep 30 07:44:02 computer kernel: [ 900.508828] R13: R14: a064a979 R15: 0001 Sep 30 07:44:02 computer kernel: [ 900.508876] FS: 7f6e84879700() GS:88007db0() knlGS: Sep 30 07:44:02 computer kernel: [ 900.508930] CS: 0010 DS: ES: CR0: 8005003b Sep 30 07:44:02 computer kernel: [ 900.508969] CR2: 7f14365d5000 CR3: 543ce000 CR4: 06e0 Sep 30 07:44:02 computer kernel: [ 900.509017] DR0: DR1: DR2: Sep 30 07:44:02 computer kernel: [ 900.509065] DR3: DR6: 0ff0 DR7: 0400 Sep 30 07:44:02 computer kernel: [ 900.509112] Process mount.cifs (pid: 8006, threadinfo 88007a3b4000, task 88004d29d160) Sep 30 07:44:02 computer kernel: [ 900.509186] 880032a30c50 81189ce7 81189c87 81421490 Sep 30 07:44:02 computer kernel: [ 900.509247] 88004d29d160 81189f5d 880069c94800 80d0 Sep 30 07:44:02 computer kernel: [ 900.509307] 8000 880069c94800 880079401400 88007a3b5c40 Sep 30 07:44:02 computer kernel: [ 900.509389] [81189ce7] ? crypto_alg_mod_lookup+0x60/0x67 Sep 30 07:44:02 computer kernel: [ 900.509432] [81189c87] ? crypto_larval_lookup+0x13a/0x13a Sep 30 07:44:02 computer kernel: [ 900.509478] [81189f5d] ? crypto_alloc_tfm+0x34/0x8f Sep 30 07:44:02 computer kernel: [ 900.509525] [a0635351] ? cifs_crypto_shash_allocate+0x16/0x169 [cifs] Sep 30 07:44:02 computer kernel: [ 900.509579] [a0622b2e] ? cifs_get_tcp_session+0x16f/0x581 [cifs] Sep 30 07:44:02 computer kernel: [ 900.509631] [a062588a] ? cifs_mount+0xed/0x53b [cifs] Sep 30 07:44:02 computer kernel: [ 900.509675] [810eb5d3] ? __kmalloc_track_caller+0xfe/0x110 Sep 30 07:44:02 computer kernel: [ 900.509721] [a0616a1a] ? cifs_do_mount+0xab/0x427 [cifs] Sep 30 07:44:02 computer kernel: [ 900.509764] [810e409e] ? alloc_pages_current+0xbc/0xcc Sep 30 07:44:02 computer kernel: [ 900.509808] [810fbeeb] ? mount_fs+0x61/0x146 Sep 30 07:44:02 computer kernel: [ 900.509846] [8110ef4e] ? vfs_kern_mount+0x5f/0x99 Sep 30 07:44:02 computer kernel: [ 900.509887] [8110f338] ?
Bug#689196: cifs-utils: mount.cifs causes kernel crash
reassign 689196 linux thanks Quoting Christian.Glueck (chglu...@web.de): Package: cifs-utils Version: 2:5.5-1 Severity: important Dear Maintainer, recently my computer stops with kernel crash screen. So, this is a kernel problem, I'm afraid. That said, I'm not sure whether there is enough information in the bug report to make it more than a bad luck report. Is that reproducible and, if so, under which circumstances? signature.asc Description: Digital signature
Bug#680235: debirf: wheezy minimal image segfaults during boot
On 30/09/12 at 00:01 -0400, Micah Anderson wrote: Hi Lucas, * Lucas Nussbaum lu...@lucas-nussbaum.net [2012-09-30 03:43-0400]: On 08/09/12 at 23:03 -0400, Daniel Kahn Gillmor wrote: Control: tags 680235 + unreproducible moreinfo Hi Lucas-- On 07/04/2012 10:40 AM, Lucas Nussbaum wrote: I generate a wheezy 'minimal' image using debirf (running it as root, since running it as normal user fails). After generation, I try to boot it using: kvm -m 512 -kernel vmlinuz-3.2.0-2-amd64 -initrd debirf-minimal_wheezy_3.2.0-2-amd64.cgz During boot, I get: [0.419335] rtc_cmos 00:01: RTC can wake from S4 [0.419735] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [0.420093] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [0.420392] cpuidle: using governor ladder [0.420629] cpuidle: using governor menu [0.420987] TCP cubic registered [0.421230] NET: Registered protocol family 10 [0.423396] Mobile IPv6 [0.423606] NET: Registered protocol family 17 [0.423868] Registering the dns_resolver key type [0.424263] registered taskstats version 1 [0.424643] rtc_cmos 00:01: setting system clock to 2012-07-04 14:30:03 UTC ( 1341412203) [0.425109] Initializing network drop monitor service [0.426024] Freeing unused kernel memory: 572k freed [0.426406] Write protecting the kernel read-only data: 6144k [0.428208] Freeing unused kernel memory: 672k freed [0.430214] Freeing unused kernel memory: 684k freed [0.432194] init[31]: segfault at 57d71c ip 0044104d sp 7fff83ab1 7f0 error 7 in sh[40+1b3000] Segmentation fault unpacking rootfs... [1.340047] Refined TSC clocksource calibration: 2793.734 MHz. i've been unable to reproduce this with existing versions, including 0.33 (just uploaded to unstable). Are you able to see this on other hardware? do you still have the image you created available? i'd be happy to take a look at it and try to dissect what's happening. Hi, I confirm that I can still reproduce this in wheezy using debirf 0.32. Using debirf 0.33 (only package that was updated when testing; same machine), it works fine both using the minimal.tgz example from debirf 0.32, and the one from debirf 0.33. I've uploaded the broken image to http://blop.info/pub/vmlinuz-3.2.0-3-amd64 http://blop.info/pub/debirf-minimal_wheezy_3.2.0-3-amd64.cgz To reproduce, boot with kvm -m 512 -kernel vmlinuz-3.2.0-3-amd64 -initrd debirf-minimal_wheezy_3.2.0-3-amd64.cgz I just downloaded your two files and did the kvm command that you provided and I did not get the segfault, rather it booted up to this: /proc/cmdline: No such file or directory Debian GNU/Linux wheezy/sid (none) tty1 (none) login: but otherwise, I do not get the segfault that you experience. The only difference here is that I was running in Squeeze. Unfortunately, I could not find a wheezy box with amd64 and kvm extensions. I'll ask around to see what I can find. If I remember correctly, it segfaults during boot, but then continues to boot and still displays the login prompt. However you cannot log in. Lucas -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#686464: USB3 HDD spontaneously disconnects sporadically
Hi Jonathan, I don't have another USB3 cable, but this one looks okay, and it is brand new - it was included with the USB enclosure. I have been using the disk internally since my report, and I have not found the time to remove it from the server to test a another kernel. As I wrote, this had happened on two entirely different PCs. Regards, Sladjan On Sep 30, 2012 2:42 AM, Jonathan Nieder jrnie...@gmail.com wrote: Hi Sladjan, Ben Hutchings wrote: On Sat, 2012-09-01 at 23:17 +0200, Sladjan Ristic wrote: The kernel.log I will upload too occured during copying files from one partition to another (ext4, both on that same external HDD). The drive seemed to disconnect, and this happened sporadically many times I worked with it. Sometimes after a short while, sometimes it didn't occur for hours. [...] Can you try using a different USB cable? If this enclosure has internal cables, can you check that they are firmly connected? If the cables are OK, can you test whether Linux 3.5 (packaged in the experimental suite as linux-image-3.5-trunk-amd64) works better? Now I'm in suspense. Do you still have access to this machine? Any new clues since the initial report? Curious, Jonathan
Bug#689197: calibre frontend does not launch ebook-viewer for azw3
Package: calibre Version: 0.8.64+dfsg-1 Severity: normal As of the latest kindle software update Amazon sends e-books in KF8 format (foo.azw3 - Found KF8 MOBI of type 'standalone'). Calibre can handle these. They can be imported into the library and converted to other formats in the main calibre program. However what does not work is viewing the books. V[iew] on an azw3 format book does not lauch calibre's ebook-viewer but a external WWW-browser (iceweasel): Warning: unknown mime-type for /home/ametzler/CalibreBlibliothek/.../somebook.azw3 -- using application/octet-stream Error: no view mailcap rules found for type application/octet-stream Please note that adding a correct mime.type to /etc/mime.types (application/x-mobipocket-ebook prc mobi azw3) does not make a difference. Calibre's ebook-viewer is capable of displaying these files if it is lauched manually (ebook-viewer /home/ametzler/CalibreBlibliothek/.../somebook.azw3) it just like the main calibre program does not know about this yet. cu andreas -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores) Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages calibre depends on: ii calibre-bin0.8.64+dfsg-1 ii fonts-liberation [ttf-liberation] 1.07.2-5 ii imagemagick8:6.7.7.10-4 ii poppler-utils 0.18.4-3 ii python-beautifulsoup 3.2.1-1 ii python-chardet 2.0.1-2 ii python-cherrypy3 3.2.2-2 ii python-cssutils0.9.10~b1-1 ii python-dateutil1.5+dfsg-0.1 ii python-dbus1.1.1-1 ii python-feedparser 5.1.2-1 ii python-imaging 1.1.7-4 ii python-lxml2.3.2-1 ii python-mechanize 1:0.2.5-3 ii python-pkg-resources 0.6.24-1 ii python-pyparsing 1.5.6+dfsg1-2 ii python-qt4 4.9.3-4 ii python-routes 1.13-2 ii python2.7 2.7.3~rc2-2.1 ii ttf-liberation 1.07.2-5 ii xdg-utils 1.1.0~rc1+git20111210-6 Versions of packages calibre recommends: pn python-dnspython none calibre suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#657395: Bug#680546: RFS: cinnamon/1.6.1-1 [ITP] -- Innovative and comfortable desktop
On 09/28/2012 11:56 PM, Nicolas Bourdaud wrote: retitle 680546 RFS: cinnamon/1.6.1-1 [ITP] thanks Dear mentors, I am looking for a sponsor for my package cinnamon for experimental. This is the desktop environment developed by the Linux Mint team which is basically a fork of gnome-shell in order to have the feeling of GNOME2 while having the modern infrastructure of GNOME3. This package requires its window manager called muffin (that needs to be sponsored as well. see muffin ITP:http://bugs.debian.org/661270 muffin RFS:http://bugs.debian.org/680544) I previously made a sponsorship request concerning an earlier version of cinnamon but it was in the middle of summer so many sponsor were on vacation. I hope to be more successful now and that cinnamon will be uploaded to experimental soon. It has indeed showed quite a lot of interest from various people. * Package name: cinnamon Version : 1.6.1-1 Upstream Author : Linux Mintr...@linuxmint.com * URL :http://cinnamon.linuxmint.com * License : GPL-2+ Section : x11 It builds those binary packages: cinnamon - Innovative and comfortable desktop cinnamon-common - Innovative and comfortable desktop (Common data files) cinnamon-dbg - Innovative and comfortable desktop (Debugging symbols) To access further information about this package, please visit the following URL: http://mentors.debian.net/package/cinnamon Alternatively, one can download the package with dget using this command: dget -x http://mentors.debian.net/debian/pool/main/c/cinnamon/cinnamon_1.6.1-1.dsc Best regards, Nicolas Bourdaud Hi, Your packaging git is on Github, any reason why you don't use Alioth instead? I've tried it (currently running it on my Wheezy laptop), and I like it! :) Did you take the packaging work directly from Mint? What exactly did you change from them? Cheers, Thomas Goirand (zigo) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689198: cscope: Please update old 15.7a (2009-04-30) to 15.8a (2012-08-04)
Package: cscope Version: 15.7a-3.6 Severity: wishlist See new release at: https://sourceforge.net/projects/cscope/files/cscope/ -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.5-trunk-amd64 (SMP w/2 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages cscope depends on: ii ed 1.6-2 ii libc62.13-35 ii libncurses5 5.9-10 ii libtinfo55.9-10 cscope recommends no packages. Versions of packages cscope suggests: pn cscope-el none -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689199: suckless-tools: update tabbed
Package: suckless-tools Version: 38-1 Severity: wishlist Tabbed version 0.4 was released in Jul, and 0.4.1 shortly after. It has a generic client support which is very useful to use tabbed with e.g. terminals instead of surf(1) without needing to recompile. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages suckless-tools depends on: ii libc6 2.13-35 ii libx11-6 2:1.5.0-1 ii libxext6 2:1.3.1-2 ii libxinerama1 2:1.1.2-1 suckless-tools recommends no packages. Versions of packages suckless-tools suggests: pn dwm none -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#685281: denial of service via many headers
Hi Salvatore, On Sat, September 29, 2012 19:15, Salvatore Bonaccorso wrote: On Sun, Aug 19, 2012 at 01:23:38PM +0200, Jordi Mallach wrote: On Sun, Aug 19, 2012 at 11:42:57AM +0200, Thijs Kinkhorst wrote: A Denial of Service attack has been reported against tinyproxy: https://bugs.launchpad.net/ubuntu/+source/tinyproxy/+bug/1036985 https://banu.com/bugzilla/show_bug.cgi?id=110#c2 Can you please see to it that this gets addressed in unstable (and by extension wheezy)? Please use CVE-2012-3505 to refer to this issue. Will try to get something done ASAP. Should I do something about stable too? The codebase should be really similar. I looked at the current prepared version for unstable in the tinyproxy subversion repository, attached is the debdiff to the current version in unstable. Are you fine if I upload this as it is to unstable? @SecurityTeam: I'm not Maintainer of the package but tinyproxy appeared on the radar for RC bugs for wheezy, so noticed this one. Thanks for your work. It looks good. The changelog does have some quirks: your version number is not NMU-style but maintianer-style, you're not Jordi Mallach and you added a dot in an unrelated stanza. If you fix these small items up, please upload this. Cheers, Thijs -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689200: network-manager al reincio no conecto
Package: network-manager Severity: important -- System Information: Debian Release: 6.0.6 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=es_AR.UTF-8, LC_CTYPE=es_AR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Tuve que editar mi /etc/network/interfaces y añadir de nuevo mis datos iface eth0 inet static address 192.168.0.130 netmask 255.255.255.0 gateway 192.168.0.1 auto eth0 y luego sudo /etc/init.d/networking start andubo. Pero me parece muy raro que el update alla dejado el servidor inoperable. Me trae recuerdos con ubuntu. Todo esto puede resolverlo con la ayuda de Puppy Linux que me dejo poner dhcp automatico y navegar para encontrar el comando olvidado. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689201: biber: Documentation is missing from package
Package: biber Version: 0.9.9+release-1 Severity: wishlist The documentation for this software (biber.pdf) is available from Sourceforge but not included in the package. As a result, the texdoc command fails to find it. (According to the biber(1) manual page, texdoc biber should retrieve the documentation, as is true for TeX/LaTeX packages generally). I hope the documentation can be included in the next version. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689192: Please update to the last version (currently 1.5.0-stable)
On Sat, 29 Sep 2012 22:48:37 -0400, David Prévot wrote: Package: spatialite-gui Version: 1.2.1-3 Severity: wishlist Hi, Hello, Please find attached an updated watch file. Yes, I'm aware of the new version. However, it needs a couple of new packages to work; and I'm actually looking for a fix for #688328. Thanks, David -- . ''`. Debian developer | http://wiki.debian.org/DavidPaleino : :' : Linuxer #334216 --|-- http://www.hanskalabs.net/ `. `'` GPG: 1392B174 | http://deb.li/dapal `- 2BAB C625 4E66 E7B8 450A C3E1 E6AA 9017 1392 B174 signature.asc Description: PGP signature
Bug#685281: denial of service via many headers
Hi Thijs On Sun, Sep 30, 2012 at 09:33:46AM +0200, Thijs Kinkhorst wrote: Hi Salvatore, On Sat, September 29, 2012 19:15, Salvatore Bonaccorso wrote: On Sun, Aug 19, 2012 at 01:23:38PM +0200, Jordi Mallach wrote: On Sun, Aug 19, 2012 at 11:42:57AM +0200, Thijs Kinkhorst wrote: A Denial of Service attack has been reported against tinyproxy: https://bugs.launchpad.net/ubuntu/+source/tinyproxy/+bug/1036985 https://banu.com/bugzilla/show_bug.cgi?id=110#c2 Can you please see to it that this gets addressed in unstable (and by extension wheezy)? Please use CVE-2012-3505 to refer to this issue. Will try to get something done ASAP. Should I do something about stable too? The codebase should be really similar. I looked at the current prepared version for unstable in the tinyproxy subversion repository, attached is the debdiff to the current version in unstable. Are you fine if I upload this as it is to unstable? @SecurityTeam: I'm not Maintainer of the package but tinyproxy appeared on the radar for RC bugs for wheezy, so noticed this one. Thanks for your work. It looks good. The changelog does have some quirks: your version number is not NMU-style but maintianer-style, you're not Jordi Mallach and you added a dot in an unrelated stanza. If you fix these small items up, please upload this. I actually haven't done the 'real' work. All the real work was already prepared by Jordi Mallach who pushed his work to the svn repository. I know he would not be able to upload the package itself in next month, so I had a look what he did, and builded his version. He asked if someone can upload this for him. I'm sorry if I was not clear about this. Regards, Salvatore signature.asc Description: Digital signature
Bug#616548: please ship upstream documentation for offline reading
On Sat, Sep 29, 2012 at 10:29:12PM -0400, Micah Anderson wrote: I'm pushing the git repository now, and going to have a beer and squash some RC bugs instead! Thanks: - for trying - for the forthcoming RC bugs fixes - and for making my day with this tale :-) feel free to do whatever you please with this bug report, maybe it'd be useful for other to mark as wontfix, if anyone else in the future try to turn you into Hulk-mode again. Cheers. PS no, the building bill is *not* fine :-P -- Stefano Zacchiroli . . . . . . . z...@upsilon.cc . . . . o . . . o . o Maître de conférences . . . . . http://upsilon.cc/zack . . . o . . . o o Debian Project Leader . . . . . . @zack on identi.ca . . o o o . . . o . « the first rule of tautology club is the first rule of tautology club » signature.asc Description: Digital signature
Bug#684352: Compaq Presario V4000T: Wifi kill switch always on unless ACPI=off is used
tags 684352 - moreinfo # regression severity 684352 important quit David Smith wrote: Some people think it might be a problem in networkmanager, but trying to find the problem there hasn't really gone anywhere. Yeah, it's more likely to be a kernel, firmware, or hardware bug. [...] Kernel from Squeeze(linux-image-2.6.32-5-686): The problem completely disappears. Very useful, thanks. [...] Kernel from Expiermental(linux-image-3.5-trunk-686-pae): System crashes on Waiting for /dev to be populated. Unable to test, although I'm not sure if I'm installing the kernel properly. That might be another instance of the same problem as http://bugs.debian.org/688711. ACPI Dump attached. Thanks! If you prevent the hp-wmi driver from loading (just running echo 'blacklist hp-wmi' /etc/modprobe.d/ds-blacklist-hpwmi.conf and rebooting should do the trick, but check lsmod output to be sure), does that avoid rfkill trouble? If so, please send a summary of symptoms to platform-driver-...@vger.kernel.org, cc-ing linux-wirel...@vger.kernel.org, Anssi Hannula anssi.hann...@iki.fi, and either me or this bug log so we can track it. Be sure to mention - steps to reproduce the problem, expected result, actual result, and how the difference indicates a bug (should be simple enough) - which kernel versions you have tested and what happened with each - full dmesg output from booting and reproducing the bug on an affected kernel, as an attachment - PCI registers for your wireless card (from running lspci -vv -s06:05.0 as root) - any other weird symptoms or observations - a link to http://bugs.debian.org/684352 for the backstory Hopefully someone upstream can suggest steps to perform or a patch to try to further track down the cause. Another hint: another tack would be to try various kernels to narrow down when this regression was introduced. There are various pre-compiled kernel versions at http://snapshot.debian.org/package/linux-2.6/. It would be interesting to see whether 2.6.38 and 2.6.39 exhibit this. Good luck, Jonathan -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689202: debsums: --root option escapes the alternate root and looks in the host system if paths in the alternate root contain absolute symlinks to directories
Package: debsums Version: 2.0.52 Severity: important Hi, while analyzing two dubious piuparts errors involving debsums, I noticed that debsums reports incorrectly some missing files. It works fine if I install debsums in the chroot and run it from there - but it fails if I run it from the outside with the --root option. One package in question is drupal6-trans-ru which ships the file /usr/share/drupal6/profiles/default/translations/ru.po, but the drupal package (which was installed first) contains a /usr/share/drupal6/profiles - /etc/drupal/6/profiles symlink, so the file actually ended up as /etc/drupal/6/profiles/default/translations/ru.po (This is a bad thing, but that's not the point in this bug report.) debsums report nothing inside the chroot: (pbuild7199)root@host:/# debsums -ac but running debsums from the outside of the chroot: $ sudo debsums -ac --root /tmp/pbuilder/build/7199/ debsums: missing file /tmp/pbuilder/build/7199//usr/share/drupal6/profiles/default/translations/ru.po (from drupal6-trans-ru package) and if I create /etc/drupal/6/profiles/default/translations/ru.po on the host system with some random content, I get a md5sum mismatch: $ sudo debsums -ac --root /tmp/pbuilder/build/7199/ /tmp/pbuilder/build/7199//usr/share/drupal6/profiles/default/translations/ru.po I don't know if one can manage to replace binaries in the chroot and then create a symlink hierarchy so that debsums run from the outside (probably with a secure, untamperable copy of the admindir given to the --admindir option) would not notice this modification as it would check a safe file from the host instead ... If this is possible, severity should be raised as this is a possible security issue. I didn't try it, but you can probably escape via a long chain of ../../../../.. ..., too. Andreas -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680749: Additional info
After some digging I had to realize, that the thinkpad_acpi module is functioning well, the error is in XFCE-s display brightness setter. This is a duplicate of: https://bugzilla.xfce.org/show_bug.cgi?id=7541 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=627336 Workaround solution: http://www.n0nb.us/blog/2012/02/restoring-screen-brightness-step-size-on-xfce4/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689165: src:mozilla-gnome-keyring: Vcs-Git and Vcs-Browser fields should point to Debian packaging, not upstream repository
Ximin Luo infini...@gmx.com writes: On 29/09/12 23:28, Ximin Luo wrote: On 29/09/12 23:21, Sébastien Villemot wrote: Ximin Luo infini...@gmx.com writes: On 29/09/12 18:48, Sébastien Villemot wrote: Package: src:mozilla-gnome-keyring Version: 0.6.3-1 Severity: minor Dear Maintainer, The Vcs-Git and Vcs-Browser fields currently point to the upstream repository. This incorrect: according to policy §5.6.26 and devref §6.2.5, they should point to the repository where the Debian packaging is stored (i.e. containing the debian/ directory). If the Debian packaging is not stored in a VCS, these fields should be removed. However, I can change those fields to point directly to the debian branch, if that would be better? Indeed, as explained in policy §5.6.26, you should point to the Debian branch using the new -b syntax (which is precisely intended for the case where the Debian packaging is not in the default branch). OK, I will fix debian/control, but which -b syntax are you talking about? I'm not up-to-date with all the latest debian developer tools. Did you mean instead do this: Vcs-Git: git://github.com/infinity0/mozilla-gnome-keyring.git -b debian Yes this is the right syntax. Also you should update the Vcs-Browser field. The right value seems to be: https://github.com/infinity0/mozilla-gnome-keyring/tree/debian Thanks, -- .''`.Sébastien Villemot : :' :Debian Developer `. `' http://www.dynare.org/sebastien `- GPG Key: 4096R/381A7594 pgpvxkGiHsEmf.pgp Description: PGP signature
Bug#682971: not have bluetooth usb 0489:e046 Foxconn / Hon Hai
Hi, aborigines wrote: Bus 003 Device 005: ID 0489:e046 Foxconn / Hon Hai Please test the attached patch, for example using the following instructions: 0. prerequisites apt-get install git build-essential 1. get the kernel history, if you don't already have it git clone \ git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 2. configure, build, test cd linux git fetch origin git checkout origin/master cp /boot/config-$(uname -r) .config; # current configuration scripts/config --disable DEBUG_INFO make localmodconfig; # optional: minimize configuration scripts/config --module BT_HCIBTUSB make deb-pkg; # optionally with -jnum for parallel build dpkg -i ../name of package; # as root reboot ... test test test ... Hopefully it reproduces the bug, so 3. try the patch cd linux git am -3sc /path/to/the/patch make deb-pkg; # maybe with -j4 dpkg -i ../name of package; # as root reboot ... test test test ... Hope that helps, Jonathan From b79fc3e6e69b27c23e0c159a9ee3ea6367d84e5a Mon Sep 17 00:00:00 2001 From: Gustavo Padovan gust...@padovan.org Date: Wed, 15 Aug 2012 01:38:11 -0300 Subject: [PATCH] Bluetooth: Add USB_VENDOR_AND_INTERFACE_INFO() for Broadcom/Foxconn Foxconn devices has a vendor specific class of device, we will match them differently now. Signed-off-by: Gustavo Padovan gust...@padovan.org Signed-off-by: Jonathan Nieder jrnie...@gmail.com --- drivers/bluetooth/btusb.c |2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 654e248763ef..248c1319759a 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -100,7 +100,7 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE(0x413c, 0x8197) }, /* Foxconn - Hon Hai */ - { USB_DEVICE(0x0489, 0xe033) }, + { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01) }, /*Broadcom devices with vendor specific id */ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, -- 1.7.10.4
Bug#680749: thinkpad: xfce and platform compete over brightness controls
reassign 680749 xfce4-power-manager forcemerge 627336 680749 affects 680749 + src:linux quit Hi, Gyuro Lehel wrote: [Subject: Re: Bug#680749: Additional info] Please keep in mind that these appear as emails in a crowded inbox, so the subject line can be a good place to put valuable context. After some digging I had to realize, that the thinkpad_acpi module is functioning well, the error is in XFCE-s display brightness setter. This is a duplicate of: https://bugzilla.xfce.org/show_bug.cgi?id=7541 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=627336 Workaround solution: http://www.n0nb.us/blog/2012/02/restoring-screen-brightness-step-size-on-xfce4/ Thanks! Merging. Ciao, Jonathan -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689096: ipw2200 crashes on wakeup
Hi Stefan, Stefan Ott wrote: Is there anything I can do to help debug this, other than building trying dozens of kernel versions to try and find the bad commit? I haven't looked closely into this report, but here are two quick ideas: A. Have you tried the 3.5.y kernel from experimental? If it works, we can try to find the patch that fixes the bug and apply the same to wheezy. If it doesn't work, that information will make it much easier for us to get help from upstream. B. You can find various kernels between 2.6.32.y and 3.2.y pre-compiled here: http://snapshot.debian.org/package/linux-2.6/ That would make a few rounds of bisection to find roughly when the bug was introduced easier. (A) seems more promising than (B), since it would be best to get the report in upstream hands soonish. Thanks and hope that helps, Jonathan -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#539549: gvfs-backends: gvfsd-cdda segfaults when an audio CD is inserted
Dear Johan, Am Dienstag, den 04.08.2009, 19:31 +0200 schrieb Emilio Pozuelo Monfort: Johan Bilien wrote: Package: gvfs-backends Version: 1.2.3-1+b1 Severity: normal Whenever I insert an audio CD on my laptop, I get a dialog which tells me it could not mount the audio CD because the DBus command timed out. When I check dmesg I can see that gvfsd-cdda crashed: [ 363.781085] 6gvfsd-cdda[6077]: segfault at 0 ip b7d77e2d sp b798d1c8 error 4 in libc-2.9.so[b7d06000+13b000] This prevents mounting the CD, and for instance sound-juicer will not see it. Can you get a backtrace of it? I cannot reproduce this with version 1.12.3-1+b1. Could you please test again with that audio CD and report back? That would be awesome and a big help to the Debian folks. Thanks, Paul signature.asc Description: This is a digitally signed message part
Bug#683695: libdrm-nouveau1a: when using Nvidia Gtx 550 Ti card boot stops at populating /dev
found 683695 linux/3.2.21-3 tags 683695 + moreinfo quit Hi Dick, Dick Thomas wrote: bought a new gfx card Nvidia Gtx 550 Ti and installed wheezy to test it failed to boot stopping at populating /dev but i could still hear the hard drive moving (and yes my hard drive is fine) Thanks for reporting it, and sorry for the slow reply. Your card is an nvcf. If we're lucky, the following change in 3.2.23-1 will have helped: * nouveau: Update to support Fermi (NVC0+) acceleration (Closes: #679566) - Refactor sub-channel use - Bump version to 1.0.0 What kernel do you use? Please attach output from reportbug --template linux-image-$(uname -r) Hope that helps, Jonathan -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#657751: gdm3: 657751: patch to fix purging when gdm3 is running
Hi, Salvatore Bonaccorso wrote (02 Sep 2012 19:41:21 GMT) : [But anyway, Paul already did an analysis which in any case (even not triggered here) should further 'stabilize' the possible purge process for gdm3.] Sergio Villar Senin wrote (03 Sep 2012 13:53:04 GMT) : I'm running sid right now, and all I can say is that I am not able to reproduce it with the current unstable version (gdm3_3.4.1-2_amd64.deb) I suggest #657751 is cloned, the new bug retitled to improve handling or userdel output in postrm, its severity set to normal, and the original #657751 closed. I'm happy to do it if the GNOME maintainers give their go ahead. Thoughts? -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680084: postinst script gets stuck
found 680084 1.56 thanks Hi, Harald Dunkel wrote (19 Jul 2012 07:42:06 GMT) : Looking at the grub-install: It seems that os-prober (run by update-grub) starts a grub-mount tool that keeps on running, even though the update-grub already did an exit. ps -ef showed me a few of these: grub-mount /dev/mapper/vg00-root2 /var/lib/os-prober/mount I can see that too with os-prober installed. $ sudo update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-4-amd64 Found initrd image: /boot/initrd.img-3.2.0-4-amd64 Found memtest86+ image: /memtest86+.bin Found memtest86+ multiboot image: /memtest86+_multiboot.bin rmdir: failed to remove `/var/lib/os-prober/mount': Device or resource busy rmdir: failed to remove `/var/lib/os-prober/mount': Device or resource busy grub-probe: error: no such disk. done $ echo $? 0 I see processes such as: grub-mount /dev/mapper/vg1-SomeLogicalVolume /var/lib/os-prober/mount (Note that this LV has nothing to do with the boot process: it is not mounted, and hosts no part of the system). Without os-prober installed: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-4-amd64 Found initrd image: /boot/initrd.img-3.2.0-4-amd64 Found memtest86+ image: /memtest86+.bin Found memtest86+ multiboot image: /memtest86+_multiboot.bin done -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#688351: jackd1: modifies conffiles (policy 10.7.3): /etc/security/limits.d/audio.conf
Control: tags -1 + patch pending Dear Maintainers, Andreas Beckmann deb...@abeckmann.de writes: debsums reports modification of the following files, from the attached log (scroll to the bottom...): debsums: missing file /etc/security/limits.d/audio.conf (from jackd2 package) Looking at the maintainer scripts, they already DTRT: initially get the file from /usr/share and delete it in postrm purge (trying both possible names). So just stop shipping the conffile, too. I have uploaded to DELAYED/5 an NMU fixing this bug, implementing the suggestion by Andreas. The debdiff is attached. Feel free to tell me if I should delay it longer. Regards, diff -Nru jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/changelog jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/changelog --- jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/changelog 2012-05-29 20:45:48.0 +0200 +++ jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/changelog 2012-09-30 11:04:29.0 +0200 @@ -1,3 +1,11 @@ +jack-audio-connection-kit (1:0.121.3+20120418git75e3e20b-2.1) unstable; urgency=low + + * Non-maintainer upload. + * No longer ship /etc/security/limits.d/audio.conf as a conffile +(Closes: #688351) + + -- Sébastien Villemot sebast...@debian.org Sun, 30 Sep 2012 11:03:37 +0200 + jack-audio-connection-kit (1:0.121.3+20120418git75e3e20b-2) unstable; urgency=low * Drop CELT support (Closes: #674651) diff -Nru jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/jackd1.install jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/jackd1.install --- jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/jackd1.install 2012-02-22 00:26:11.0 +0100 +++ jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/jackd1.install 2012-09-30 11:01:43.0 +0200 @@ -6,5 +6,4 @@ debian/tmp/usr/lib/*/jack/jack_net.so debian/tmp/usr/lib/*/jack/jack_oss.so debian/bash_completion.d etc -debian/audio.conf etc/security/limits.d debian/audio.conf usr/share/jackd diff -Nru jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/jackd1.postinst jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/jackd1.postinst --- jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/jackd1.postinst 2012-02-22 00:26:11.0 +0100 +++ jack-audio-connection-kit-0.121.3+20120418git75e3e20b/debian/jackd1.postinst 2012-09-30 11:01:00.0 +0200 @@ -5,8 +5,8 @@ CONFIG_FILE=/etc/security/limits.d/audio.conf -# if neither $CONFIG_FILE nor ${CONFIG_FILE}.disabled exists, the file -# somehow got lost. Let's copy it over from /usr/share/ +# if neither $CONFIG_FILE nor ${CONFIG_FILE}.disabled exists, +# let's copy it over from /usr/share/ if [ ! -s ${CONFIG_FILE} -a ! -s ${CONFIG_FILE}.disabled ]; then cp /usr/share/jackd/audio.conf ${CONFIG_FILE}.disabled fi -- .''`.Sébastien Villemot : :' :Debian Developer `. `' http://www.dynare.org/sebastien `- GPG Key: 4096R/381A7594 pgp7DHaVcniRM.pgp Description: PGP signature
Bug#686464: USB3 HDD spontaneously disconnects sporadically
tags 686464 = unreproducible quit Sladjan Ri wrote: I have been using the disk internally since my report, and I have not found the time to remove it from the server to test a another kernel. Thanks for the update, and no problem. Do you think you'll have time to try this some time in the next couple of months? If you won't, it's not clear to me how to move forward on this in the short term, so I'd suggest closing the bug and revisiting it once you or someone else finds a moment to reproduce it. If you're just busy now and will probably have a chance to experiment some time this year, that's fine and we can wait. Jonathan -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#687048: avconv: x264 profile only supports main and baseline
tags 687048 moreinfo stop I'm trying to use avconv to convert to h264 using libx264. I want to set the profile to high, but I still get main. I can change it to (constrained) baseline. But setting any other valid profile will get me the main profile. Setting it to an invalid option gives me an error. So it does recoginse the strings, it just doesn't seem to accept them for what ever reason. Just to be sure, can you please provide the complete command that you have used in your tests? Do you use the old, deprecated -vpre options or the newish x264 codec private options: avconv -help | grep x264 [...] mbtree E.V.. use macroblock tree ratecontrol (x264 only) -crf float E.V.. enables constant quality mode, and selects the quality (x264) -keyint_minint E.V.. minimum interval between IDR-frames (x264) libx264 AVOptions: -presetstring E.V.. Set the encoding preset (cf. x264 --fullhelp) -tune string E.V.. Tune the encoding params (cf. x264 --fullhelp) -profile string E.V.. Set profile restrictions (cf. x264 --fullhelp) Using x264 directly does give me the profile I request. Okay, that means that libx264 is functional. -- regards, Reinhard -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689203: weechat: http://anonscm.debian.org/git/users/kolter/weechat.git returns 403
Source: weechat Version: 0.3.8-1 Severity: minor The URL in the Vcs-Browser field gives a 403. It would be great if this could be fixed. Thanks Kind regards -- Sebastian Ramacher signature.asc Description: Digital signature
Bug#684767: kernel: missing support for Ivy Bridge GT2 Server
On Sun, Sep 30, 2012 at 1:52 AM, Jonathan Nieder jrnie...@gmail.com wrote: Hi Maik, Maik Zumstrull wrote: This is on an Ivy Bridge Xeon E3 with GPU. [...] 3.2 crashes as well, but not as hard as 3.4. With 3.2, X doesn't come up, but you can switch to a console and reboot. Sorry for the slow reply. Please test the attached patch, for example using the following instructions. With those instructions and with the patch, 3.2.30 can bring up i915 KMS. Without the patch, it cannot. Seems to hit the spot. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#686464: USB3 HDD spontaneously disconnects sporadically
Yes, certainly I will try this again, right now my USB enclosure is sitting here without any use. Regards, Sladjan On Sep 30, 2012 12:00 PM, Jonathan Nieder jrnie...@gmail.com wrote: tags 686464 = unreproducible quit Sladjan Ri wrote: I have been using the disk internally since my report, and I have not found the time to remove it from the server to test a another kernel. Thanks for the update, and no problem. Do you think you'll have time to try this some time in the next couple of months? If you won't, it's not clear to me how to move forward on this in the short term, so I'd suggest closing the bug and revisiting it once you or someone else finds a moment to reproduce it. If you're just busy now and will probably have a chance to experiment some time this year, that's fine and we can wait. Jonathan
Bug#686153: [PATCH] int10: fix pci_device_read_rom usage
Keith, could you pick up this patch? Thanks, Julien On Wed, Aug 29, 2012 at 20:03:58 +0200, Julien Cristau wrote: From: Stephan Schreiber i...@fs-driver.org I noticed that the build-in int10 driver always reports Unable to retrieve all of segment 0x0C. even though the entire BIOS data is retrieved with success. The associated code is in hw/xfree86/int10/generic.c, in the function xf86ExtendedInitInt10(): if (pci_device_read_rom(pInt-dev, vbiosMem) V_BIOS_SIZE) { xf86DrvMsg(screen, X_WARNING, Unable to retrieve all of segment 0x0C.\n); } The function pci_device_read_rom() is from libpciaccess; its return value is not a size but an error status code: 0 means success. If pci_device_read_rom() returns 0 for success, the warning is generated. The proposed patch corrects the evaluation of the return value of pci_device_read_rom() and of the supplied BIOS size. Debian bug#686153 Signed-off-by: Julien Cristau jcris...@debian.org --- hw/xfree86/int10/generic.c |3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/xfree86/int10/generic.c b/hw/xfree86/int10/generic.c index 4633120..d7594de 100644 --- a/hw/xfree86/int10/generic.c +++ b/hw/xfree86/int10/generic.c @@ -178,7 +178,8 @@ xf86ExtendedInitInt10(int entityIndex, int Flags) */ vbiosMem = (char *) base + V_BIOS; memset(vbiosMem, 0, 2 * V_BIOS_SIZE); -if (pci_device_read_rom(pInt-dev, vbiosMem) V_BIOS_SIZE) { +if (pci_device_read_rom(pInt-dev, vbiosMem) != 0 +|| pInt-dev-rom_size V_BIOS_SIZE) { xf86DrvMsg(pScrn-scrnIndex, X_WARNING, Unable to retrieve all of segment 0x0C.\n); } -- 1.7.10.4 signature.asc Description: Digital signature
Bug#689204: unblock: apt-listbugs/0.1.8
Package: release.debian.org Severity: normal User: release.debian@packages.debian.org Usertags: unblock Please unblock package apt-listbugs As can be seen with the following command on the git repository: $ git diff apt-listbugs/0.1.7..apt-listbugs/0.1.8 | filterdiff \ --exclude='*.po' --exclude='*.pot' the only non-l10n changes from version 0.1.7 are: * i18n fixes and enhancements * English improvements and clarifications in translatable strings and in the documentation (discussed on the debian-l10n-english mailing list) * a dependency adjustment, done to drop a transitional package (libgettext-ruby1.8 replaced by ruby-gettext) I am attaching the output of the above command. Please also take a look at the git repository, in case you want to review the changes organized in commits: http://anonscm.debian.org/gitweb/?p=apt-listbugs/apt-listbugs.git;a=shortlog Thanks for your time! unblock apt-listbugs/0.1.8 -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (800, 'testing'), (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash apt-listbugs_017_018.diff.gz Description: GNU Zip compressed data
Bug#687442: linux-image-3.2.0-3-686-pae: Add Intel Ivy Bridge support
Hi, Am Freitag, 28. September 2012 schrieb Jonathan Nieder: If you have a 64-bit CPU, one possibility is sha1sum linux-image-3.2.0-4-amd64_3.2.30-1_amd64.deb dpkg --force-architecture --install linux-image-3.2.0-4-amd64_3.2.20-1_amd64.deb The magic of multi-arch (well, sort of). :) Thanks Jonathan, it helped. I installed and bootet the kernel today. During the boot process the singnal to my DVI connected monitor disappears. I've created a video of the boot process. The last lines are: input: PC Speaker as /devices/platform/pcspkr/input/input4 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) Unfortunately I could not provide anymore output. With the disabled KMS (i915.modeset=0) the boot was successful. Once I disabled KMS at boottime (i915.modeset=0). This boot process has been completed. Audio and network is working. The dmesg output is attached. Regards, Carsten dmesg_20120930-nokms.log.bz2 Description: application/bzip
Bug#687048: avconv: x264 profile only supports main and baseline
On Sun, Sep 30, 2012 at 12:02:06PM +0200, Reinhard Tartler wrote: tags 687048 moreinfo stop I'm trying to use avconv to convert to h264 using libx264. I want to set the profile to high, but I still get main. I can change it to (constrained) baseline. But setting any other valid profile will get me the main profile. Setting it to an invalid option gives me an error. So it does recoginse the strings, it just doesn't seem to accept them for what ever reason. Just to be sure, can you please provide the complete command that you have used in your tests? Do you use the old, deprecated -vpre options or the newish x264 codec private options: I used something like: avconv -i inputfile -vcodec libx264 -profile high outputfile I don't think -vpre option still work? At least not all of them. Kurt -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689205: app-install-data and goldendict: error when trying to install together
Package: goldendict,app-install-data Version: goldendict/1.0.2~git20120929-2 Version: app-install-data/2012.06.16.1 Severity: serious User: trei...@debian.org Usertags: edos-file-overwrite Date: 2012-09-30 Architecture: amd64 Distribution: sid Hi, automatic installation tests of packages that share a file and at the same time do not conflict by their package dependency relationships has detected the following problem: WARNING: The following packages cannot be authenticated! libcap2 libkeyutils1 libkrb5support0 libk5crypto3 libkrb5-3 libgssapi-krb5-2 libsasl2-2 libldap-2.4-2 libpcre3 libwrap0 libxml2 libasound2 libasyncns0 libxau6 x11-common libice6 libsm6 libxdmcp6 libxcb1 libx11-data libx11-6 libxt6 libaudio2 libavahi-common-data libavahi-common3 libdbus-1-3 libavahi-client3 libavutil51 libdirac-encoder0 libgsm1 libmp3lame0 libopenjpeg2 liborc-0.4-0 libschroedinger-1.0-0 libspeex1 libogg0 libtheora0 libva1 libvorbis0a libvorbisenc2 libvpx1 libx264-123 libxvidcore4 libavcodec53 librtmp0 libavformat53 libbluray1 libcrystalhd3 libdirac-decoder0 tsconf libts-0.0-0 libdirectfb-1.2-9 libdvdread4 libdvdnav4 libebml3 libexpat1 libfaad2 libffi5 libflac8 libfreetype6 ucf ttf-dejavu-core fontconfig-config libfontconfig1 libfribidi0 libglib2.0-0 libgstreamer0.10-0 iso-codes libgstreamer-plugins-base0.10-0 libhunspell-1.3-0 libjpeg8 liblcms1 liblua5.1-0 libmatroska5 libmng1 libmpcdec6 libmpeg2-4 libmtp-common libusb-1.0-0 libmtp9 libjson0 libsndfile1 libx11-xcb1 libxext6 libxi6 libxtst6 libpulse0 libpulse-mainloop-glib0 libqtcore4 libqt4-xml qdbus libqt4-dbus fontconfig libpng12-0 libjbig0 libtiff4 libxrender1 libqtgui4 libphonon4 libpostproc52 libproxy0 libqt4-network libqtwebkit4 libraw1394-11 libsamplerate0 libshout3 libtalloc2 libtdb1 libwbclient0 libsmbclient libspeexdsp1 libswscale2 libtag1-vanilla libv4lconvert0 libv4l-0 vlc-data libvlccore5 libvlc5 libvorbisfile3 libzvbi-common libzvbi0 liba52-0.7.4 libenca0 libass4 libavc1394-0 libcddb2 libcdio13 libdc1394-22 libdca0 libdvbpsi7 libiso9660-8 libkate1 liblircclient0 libmad0 libmodplug1 libresid-builder0c2a libsidplay2 libtag1c2a libtwolame0 libupnp6 libvcdinfo0 vlc-nox app-install-data phonon-backend-vlc phonon goldendict Extracting templates from packages: 20% Extracting templates from packages: 41% Extracting templates from packages: 61% Extracting templates from packages: 82% Extracting templates from packages: 100% Preconfiguring packages ... Authentication warning overridden. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously unselected package libcap2:amd64. (Reading database ... 10741 files and directories currently installed.) Unpacking libcap2:amd64 (from .../libcap2_1%3a2.22-1.2_amd64.deb) ... Selecting previously unselected package libkeyutils1:amd64. Unpacking libkeyutils1:amd64 (from .../libkeyutils1_1.5.5-3_amd64.deb) ... Selecting previously unselected package libkrb5support0:amd64. Unpacking libkrb5support0:amd64 (from .../libkrb5support0_1.10.1+dfsg-2_amd64.deb) ... Selecting previously unselected package libk5crypto3:amd64. Unpacking libk5crypto3:amd64 (from .../libk5crypto3_1.10.1+dfsg-2_amd64.deb) ... Selecting previously unselected package libkrb5-3:amd64. Unpacking libkrb5-3:amd64 (from .../libkrb5-3_1.10.1+dfsg-2_amd64.deb) ... Selecting previously unselected package libgssapi-krb5-2:amd64. Unpacking libgssapi-krb5-2:amd64 (from .../libgssapi-krb5-2_1.10.1+dfsg-2_amd64.deb) ... Selecting previously unselected package libsasl2-2:amd64. Unpacking libsasl2-2:amd64 (from .../libsasl2-2_2.1.25.dfsg1-5_amd64.deb) ... Selecting previously unselected package libldap-2.4-2:amd64. Unpacking libldap-2.4-2:amd64 (from .../libldap-2.4-2_2.4.31-1_amd64.deb) ... Selecting previously unselected package libpcre3:amd64. Unpacking libpcre3:amd64 (from .../libpcre3_1%3a8.31-1_amd64.deb) ... Selecting previously unselected package libwrap0:amd64. Unpacking libwrap0:amd64 (from .../libwrap0_7.6.q-24_amd64.deb) ... Selecting previously unselected package libxml2:amd64. Unpacking libxml2:amd64 (from .../libxml2_2.8.0+dfsg1-5_amd64.deb) ... Selecting previously unselected package libasound2:amd64. Unpacking libasound2:amd64 (from .../libasound2_1.0.25-4_amd64.deb) ... Selecting previously unselected package libasyncns0:amd64. Unpacking libasyncns0:amd64 (from .../libasyncns0_0.8-4_amd64.deb) ... Selecting previously unselected package libxau6:amd64. Unpacking libxau6:amd64 (from .../libxau6_1%3a1.0.7-1_amd64.deb) ... Selecting previously unselected package x11-common. Unpacking x11-common (from .../x11-common_1%3a7.7+1_all.deb) ... Selecting previously unselected package libice6:amd64. Unpacking libice6:amd64 (from .../libice6_2%3a1.0.8-2_amd64.deb) ... Selecting previously unselected package libsm6:amd64. Unpacking libsm6:amd64 (from .../libsm6_2%3a1.2.1-2_amd64.deb) ... Selecting previously unselected package libxdmcp6:amd64. Unpacking libxdmcp6:amd64 (from
Bug#634890: klibc does not work on armhf
On Sat, 29 Sep 2012, Thorsten Glaser wrote: I’ve submitted upstream a number of commits that fix this, plus one for the Debian packaging: • fix http://www.zytor.com/pipermail/klibc/2012-September/003366.html • fix http://www.zytor.com/pipermail/klibc/2012-September/003368.html • pkg http://www.zytor.com/pipermail/klibc/2012-September/003367.html maks, are you available or should I NMU? nice, work!! Just flacky internet today, I'll have a full look tomorrow to incorporate. thank you. -- maks -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689206: O: libkdtree++-dev
Package: wnpp Severity: normal -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#687930: shotwell: Segfault, on invalid piwigo response
mdupont@space-station:~$ gdb /usr/bin/shotwell GNU gdb (GDB) 7.4.1-debian Copyright (C) 2012 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as i486-linux-gnu. For bug reporting instructions, please see: http://www.gnu.org/software/gdb/bugs/... Reading symbols from /usr/bin/shotwell...(no debugging symbols found)...done. (gdb) r Starting program: /usr/bin/shotwell [Thread debugging using libthread_db enabled] Using host libthread_db library /lib/i386-linux-gnu/libthread_db.so.1. [New Thread 0xb33f2b70 (LWP 31463)] warning: unable to open /proc file '/proc/31460/status' (not a problem, in a chroot) Entity: line 1: parser error : Start tag expected, '' not found crash ^ Entity: line 1: parser error : Start tag expected, '' not found crash ^ Program received signal SIGSEGV, Segmentation fault. 0xb29bfd15 in publishing_rest_support_xml_document_get_named_child () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so (gdb) bt #0 0xb29bfd15 in publishing_rest_support_xml_document_get_named_child () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #1 0xa6aeb876 in publishing_piwigo_transaction_get_error_code () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing-extras.so #2 0xa6addfc8 in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing-extras.so #3 0xb29c031f in publishing_rest_support_xml_document_parse_string () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #4 0xa6ade392 in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing-extras.so #5 0xa6add90e in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing-extras.so #6 0xb5551bef in g_cclosure_marshal_VOID__VOID () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #7 0xb554fe76 in g_closure_invoke () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #8 0xb5561945 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #9 0xb5569b56 in g_signal_emit_valist () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #10 0xb556a155 in g_signal_emit_by_name () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #11 0xb29bbc52 in publishing_rest_support_transaction_send () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #12 0xb29bcc6e in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #13 0xb29bceee in publishing_rest_support_transaction_execute () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #14 0xa6addbe7 in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing-extras.so #15 0xa6adc869 in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing-extras.so #16 0x080ff272 in spit_publishing_publisher_start () #17 0x08133fee in spit_publishing_concrete_publishing_host_start_publishing () #18 0x08130d16 in ?? () #19 0x08130e0f in publishing_ui_publishing_dialog_run () #20 0x081324de in publishing_ui_publishing_dialog_go () #21 0x081f6348 in ?? () #22 0xb5551bef in g_cclosure_marshal_VOID__VOID () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #23 0xb554fe76 in g_closure_invoke () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #24 0xb5561945 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #25 0xb5569b56 in g_signal_emit_valist () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #26 0xb5569cd3 in g_signal_emit () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 ---Type return to continue, or q return to quit--- #27 0xb5dddec6 in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #28 0xb5dde5fd in gtk_action_activate () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #29 0xb5ef7005 in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #30 0xb5551c3a in g_cclosure_marshal_VOID__VOIDv () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #31 0xb554e7a7 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #32 0xb5550121 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #33 0xb5569279 in g_signal_emit_valist () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #34 0xb5569cd3 in g_signal_emit () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #35 0xb6028fd3 in gtk_widget_activate () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #36 0xb5efc478 in gtk_menu_shell_activate_item () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #37 0xb5efc879 in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #38 0xb5ef0ab1 in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #39 0xb5ee1930 in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #40 0xb554e7a7 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #41 0xb5550121 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #42 0xb5569279 in g_signal_emit_valist () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #43 0xb5569cd3 in g_signal_emit () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #44
Bug#689207: ITP: rust -- a safe, concurrent, practical language
Package: wnpp Severity: wishlist Owner: Luca Bruno lu...@debian.org * Package name: rust Version : 0.3.4 Upstream Author : Graydon Hoare et al. rust-...@mozilla.org * URL : http://http://www.rust-lang.org/ * License : MIT Programming Lang: C/C++, Rust Description : a safe, concurrent, practical language Rust is a curly-brace, block-structured expression language. It visually resembles the C language family, but differs significantly in syntactic and semantic details. Its design is oriented toward concerns of programming in the large, that is, of creating and maintaining boundaries - both abstract and operational - that preserve large-system integrity, availability and concurrency. . It supports a mixture of imperative procedural, concurrent actor, object-oriented and pure functional styles. Rust also supports generic programming and metaprogramming, in both static and dynamic styles. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#686212: [BTS#686212] templates://lsh-utils/{lsh-server.templates,control}
On söndagen den 23 september 2012, you stated the following: Please let me know if you intend to fix this bug in Wheezy: if so, I'll shake a bit more the Spanish translators in order to make sure they provide an update, since it's one of the languages already (almost) 100 % complete, it would be a shame to brake its status while improving the English one. Dunno, you initiated the process and I'll be happy to finish it, even though it doesn't feel like the most urgent thing, as long as it's covered by the freeze exception policy, which it still is, right? Now the Spanish translation has been updated too. -- Magnus Holmgrenholmg...@debian.org Debian Developer signature.asc Description: This is a digitally signed message part.
Bug#689208: apt-cacher: Does not work with virtualbox-repository
Package: apt-cacher Version: 1.7.5 Severity: normal Dear Maintainer, * What led up to the situation? setting up apt-cacher to serve also this source.list entry deb http://download.virtualbox.org/virtualbox/debian squeeze contrib non-free * What exactly did you do (or not do) that was effective (or ineffective)? changing above line deb http://apt-cacher-server:3142/download.virtualbox.org/virtualbox/debian squeeze contrib non-free * What was the outcome of this action? doing apt-get update brought: Err http://thecus squeeze/contrib amd64 Packages 502 apt-cacher internal error (died) * What outcome did you expect instead? Downloading the lists for the virtualbox servers. Additional Information: - apt-cacher is running in daemon mode Log-file show this: == error.log == Sun Sep 30 13:11:11 2012|error [13701]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Sun Sep 30 13:11:11 2012|error [13702]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Sun Sep 30 13:11:11 2012|error [13703]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Sun Sep 30 13:11:12 2012|error [13704]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Sun Sep 30 13:11:16 2012|error [13705]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Sun Sep 30 13:11:17 2012|error [13706]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Sun Sep 30 13:11:17 2012|error [13707]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Sun Sep 30 13:11:17 2012|error [13708]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Sun Sep 30 13:11:20 2012|error [13709]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Sun Sep 30 13:11:21 2012|error [13710]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Sun Sep 30 13:11:21 2012|error [13711]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Sun Sep 30 13:11:22 2012|error [13712]: Usage: $h-header($field, ...) at /usr/share/perl5/HTTP/Message.pm line 649 Please let me know if you need addtional information coldtobi -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-2-amd64 (SMP w/3 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#684352: Compaq Presario V4000T: Wifi kill switch always on unless ACPI=off is used
Yes, echo 'blacklist hp-wmi' /etc/modprobe.d/ds-blacklist-hpwmi.conf Fixes the problem in Wheezy, using linux-image-3.2.0-3-686-pae in Wheezy. I'll send an e-mail out tomorrow with all the needed information that you listed. Thanks again for your help. -David
Bug#689207: ITP: rust -- a safe, concurrent, practical language
On Sun, Sep 30, 2012 at 01:22:01PM +0200, Luca Bruno wrote: Package: wnpp Severity: wishlist Owner: Luca Bruno lu...@debian.org * Package name: rust Version : 0.3.4 Upstream Author : Graydon Hoare et al. rust-...@mozilla.org * URL : http://http://www.rust-lang.org/ * License : MIT Programming Lang: C/C++, Rust Description : a safe, concurrent, practical language Rust is a curly-brace, block-structured expression language. It visually resembles the C language family, but differs significantly in syntactic and semantic details. Its design is oriented toward concerns of programming in the large, that is, of creating and maintaining boundaries - both abstract and operational - that preserve large-system integrity, availability and concurrency. . It supports a mixture of imperative procedural, concurrent actor, object-oriented and pure functional styles. Rust also supports generic programming and metaprogramming, in both static and dynamic styles. Good luck bootstrapping it... Mike -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#687930: shotwell: Segfault, on invalid piwigo response
Thanks for the backtrace! Would it be possible to test whether the new upstream version (0.13, which I uploaded to experimental yesterday) produces the same crash? -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689181: Related to https://bugs.launchpad.net/keystone/+bug/997700
Related to https://bugs.launchpad.net/keystone/+bug/997700 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#687930: shotwell: Segfault, on invalid piwigo response
sure, how to test? i upgraded everything before i tested today. here are my apt sources : deb http://ftp.us.debian.org/debian unstable main deb-src http://ftp.us.debian.org/debian unstable main deb http://ftp.us.debian.org/debian experimental main deb-src http://ftp.us.debian.org/debian experimental main On Sun, Sep 30, 2012 at 1:42 PM, Luca Falavigna dktrkr...@debian.org wrote: Thanks for the backtrace! Would it be possible to test whether the new upstream version (0.13, which I uploaded to experimental yesterday) produces the same crash? -- James Michael DuPont Member of Free Libre Open Source Software Kosova http://flossk.org Saving wikipedia(tm) articles from deletion http://SpeedyDeletion.wikia.com Contributor FOSM, the CC-BY-SA map of the world http://fosm.org Mozilla Rep https://reps.mozilla.org/u/h4ck3rm1k3 Free Software Foundation Europe Fellow http://fsfe.org/support/?h4ck3rm1k3 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689209: fonts-unfonts-core: Wrong address un Vcs-SVN field: the package is not in the pkg-fonts SVN repository
Package: fonts-unfonts-core Severity: minor Even if it claims to be, this package is not in the Fonts Packaging Team SVN repository. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (101, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#687930: shotwell: Segfault, on invalid piwigo response
You could add experimental lines in your sources.list file, or download binaries from here: http://packages.debian.org/experimental/i386/shotwell/download http://packages.debian.org/experimental/all/shotwell-common/download -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689210: keystone: CVE-2012-445{6,7}
Package: keystone Severity: grave Tags: security Justification: user security hole Hi, two more CVEs were allocated for keystone: CVE-2012-4456: fails to validate tokens in Admin API CVE-2012-4457: fails to raise Unauthorized user error for disabled tenant Could you upload isolated fixes to unstable? Regards, -- Yves-Alexis -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-grsec-amd64 (SMP w/4 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#687930: shotwell: Segfault, on invalid piwigo response
i had them added, but needed the -t apt-get -t experimental install shotwell same error : shotwell 0.13.0-1 Entity: line 1: parser error : Start tag expected, '' not found crash ^ Entity: line 1: parser error : Start tag expected, '' not found crash ^ Program received signal SIGSEGV, Segmentation fault. 0xa74b78c5 in publishing_rest_support_xml_document_get_named_child () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so (gdb) bt #0 0xa74b78c5 in publishing_rest_support_xml_document_get_named_child () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #1 0xa74ac0b5 in publishing_piwigo_transaction_get_error_code () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #2 0xa749e530 in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #3 0xa74b7ecf in publishing_rest_support_xml_document_parse_string () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #4 0xa749e8fa in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #5 0xa749de76 in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #6 0xb5363bef in g_cclosure_marshal_VOID__VOID () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #7 0xb5361e76 in g_closure_invoke () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #8 0xb5373945 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #9 0xb537bb56 in g_signal_emit_valist () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #10 0xb537c155 in g_signal_emit_by_name () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #11 0xa74b38d6 in publishing_rest_support_transaction_send () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #12 0xa74b48f2 in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #13 0xa74b4b72 in publishing_rest_support_transaction_execute () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #14 0xa749e14f in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #15 0xa749de34 in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #16 0xa749daf7 in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #17 0xa74a6b97 in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #18 0xb5361e76 in g_closure_invoke () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #19 0xb5373945 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #20 0xb537bb56 in g_signal_emit_valist () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #21 0xb537c155 in g_signal_emit_by_name () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #22 0xa74a6597 in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #23 0xa74a529e in ?? () from /usr/lib/shotwell/plugins/builtin/shotwell-publishing.so #24 0xb5363c57 in g_cclosure_marshal_VOID__VOIDv () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #25 0xb5362121 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #26 0xb537b279 in g_signal_emit_valist () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 ---Type return to continue, or q return to quit---c #27 0xb537bcd3 in g_signal_emit () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #28 0xb5c1884a in gtk_button_clicked () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #29 0xb5c19f08 in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #30 0xb5363c3a in g_cclosure_marshal_VOID__VOIDv () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #31 0xb53607a7 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #32 0xb5362121 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #33 0xb537b279 in g_signal_emit_valist () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #34 0xb537bcd3 in g_signal_emit () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #35 0xb5c17c96 in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #36 0xb5cf2930 in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #37 0xb53607a7 in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #38 0xb536205d in ?? () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #39 0xb537b279 in g_signal_emit_valist () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #40 0xb537bcd3 in g_signal_emit () from /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 #41 0xb5e3adeb in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #42 0xb5cf0438 in ?? () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #43 0xb5cf2500 in gtk_main_do_event () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #44 0xb56d593c in ?? () from /usr/lib/i386-linux-gnu/libgdk-3.so.0 #45 0xb56fea88 in ?? () from /usr/lib/i386-linux-gnu/libgdk-3.so.0 #46 0xb52925c3 in g_main_context_dispatch () from /lib/i386-linux-gnu/libglib-2.0.so.0 #47 0xb5292960 in ?? () from /lib/i386-linux-gnu/libglib-2.0.so.0 #48 0xb5292dbb in g_main_loop_run () from /lib/i386-linux-gnu/libglib-2.0.so.0 #49 0xb5c732ad in gtk_dialog_run () from /usr/lib/i386-linux-gnu/libgtk-3.so.0 #50 0x0812fc48 in publishing_ui_publishing_dialog_run () #51 0x081312fe in publishing_ui_publishing_dialog_go () #52 0x081f5f48 in ?? () #53
Bug#685969: fixed in gnugk 2:3.0.2-2
Control: reopen -1 On Sat, 2012-09-29 at 23:32 +, Mark Purcell wrote: gnugk (2:3.0.2-2) unstable; urgency=medium . * Fix CVE-2012-3534 Added gnugk-fix-cve-2012-3534.diff (Closes: #685969) * Urgency medium for RC bug I was looking at the diff for this with a view to unblocking it, but as far as I can see it's not actually fixed. The patch is indeed added to the package, but not applied during build as: $ cat debian/patches/series #gnugk-fix-cve-2012-3534.diff The patch does apply to the package, but attempting to build with it enabled produces: [CC] GkStatus.cxx GkStatus.cxx:833:4: error: expected unqualified-id before 'else' GkStatus.cxx:838:1: error: expected declaration before '}' token Looking at http://openh323gk.cvs.sourceforge.net/viewvc/openh323gk/openh323gk/GkStatus.cxx?r1=1.132r2=1.133 , the patch in the Debian package includes the removal of the old lines around lines 833 and 843, but not the subsequent addition of the replacement lines. This means that we end up with void GkStatus::AuthenticateClient(StatusClient* newClient) { newClient-SetTraceLevel(GkConfig()-GetInteger(StatusTraceLevel, MAX_STATUS_TRACE_LEVEL)); PTRACE(1, STATUS\tNew client authenticated successfully: newClient-WhoAmI() , login: newClient-GetUser() ); // the welcome messages newClient-WriteString(PrintGkVersion()); newClient-Flush(); AddSocket(newClient); } else { newClient-WriteString(\r\nAccess forbidden!\r\n); // newClient-Flush(); // dont' flush when access is denied to avoid blocking delete newClient; } } Regards, Adam -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689211: ITP: gcc-4.7-doc -- documentation for the GNU compilers (gcc, gobjc, g++, gcj, gnat, and gccgo)
Package: wnpp Severity: wishlist Owner: Guo Yixuan culu@gmail.com X-Debbugs-Cc: debian-de...@lists.debian.org, debian-...@lists.debian.org * Package name: gcc-4.7-doc Version : 4.7.2-1 Upstream Author : Free Software Foundation * URL : http://gcc.gnu.org * License : GFDL with front/back cover texts Programming Lang: mainly Texinfo Description : documentation for the GNU compilers (gcc, gobjc, g++, gcj, gnat, and gccgo) GCC's documents need an update, and I based my work on previous maintainers of gcc-4.4-doc-non-dfsg: Nikita V. Youshchenko[1] and Samuel Bronson[2]. [1] Nikita V. Youshchenko yo...@debian.org [2] Samuel Bronson naes...@gmail.com This package contains documentation in manpage, info and pdf. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682481: gnome-shell: epiphany shouldn't be the default browser
Didn't you forgot to add | www-browser in the Depends: line? Funny upgrade today with 121 new packages although I have at least two packages installed that provide www-browser. Cheers -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689212: unzip doesn't restore uid/gid
Package: unzip Version: 6.0-7 Severity: important Tags: upstream When unzipping a file with -X unzip doesn't restore uid/gid information although it is present in the zip file. I asked about this on the infozip forum and they confirmed it was a bug in the build system. They also supplied patches to make it work which I'll include. You can see the discussion on http://www.info-zip.org/phpBB3/viewtopic.php?f=3t=402 This is the debian/rules patch: --- unzip-6.0/debian/rules 2012-03-31 23:57:19.0 +0200 +++ unzip-6.0.patched/debian/rules 2012-09-30 14:02:51.0 +0200 @@ -28,6 +28,7 @@ build: $(MAKE) -f unix/Makefile D_USE_BZ2=-DUSE_BZIP2 L_BZ2=-lbz2 \ +LOCAL_UNZIP=-DIZ_HAVE_UXUIDGID \ CC=$(CC) LF2=$(LDFLAGS) \ CF=$(CFLAGS) $(CPPFLAGS) -I. $(DEFINES) unzips touch build and the process.c file patch: --- unzip610b/process.c 2010-10-31 21:00:00.0 +0100 +++ process.c 2012-09-30 12:35:27.0 +0200 @@ -2993,9 +2993,9 @@ */ #ifdef IZ_HAVE_UXUIDGID -if (eb_len = EB_UX3_MINLEN - z_uidgid != NULL - (*((EB_HEADSIZE + 0) + ef_buf) == 1) +if ((eb_len = EB_UX3_MINLEN) + (z_uidgid != NULL) + ((*((EB_HEADSIZE + 0) + ef_buf) == 1))) /* only know about version 1 */ { uch uid_size; @@ -3007,10 +3007,10 @@ flags = ~0x0ff; /* ignore any previous UNIX field */ if ( read_ux3_value((EB_HEADSIZE + 2) + ef_buf, -uid_size, z_uidgid[0]) +uid_size, z_uidgid[0]) read_ux3_value((EB_HEADSIZE + uid_size + 3) + ef_buf, -gid_size, z_uidgid[1]) ) +gid_size, z_uidgid[1]) ) { flags |= EB_UX2_VALID; /* signal success */ } Kind regards, Axel -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages unzip depends on: ii libbz2-1.0 1.0.6-4 ii libc6 2.13-35 unzip recommends no packages. Versions of packages unzip suggests: ii zip 3.0-6 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#688059: samba: files not deleted, smbstatus segfaults
Quoting Oxan van Leeuwen (o...@oxanvanleeuwen.nl): tags 688059 + patch retitle 688059 samba: files not deleted, smbstatus segfaults thanks Hi, I also experience this bug using 3.6.6. Not only makes it smbstatus segfault, it also makes deleting files impossible. It seems to be upstream bug 9058 (https://bugzilla.samba.org/show_bug.cgi?id=9058). My only problem is that upstream bug #9058 seems to have two different fixes: https://attachments.samba.org/attachment.cgi?id=7809 https://attachments.samba.org/attachment.cgi?id=7817 Both are unrelated and I suspect both are needed. Nut I'm having hard times just describing them. signature.asc Description: Digital signature
Bug#689213: pbuilder: Deletes pbuilderrc's contents and then fails to configure under some circumstances
Package: pbuilder Version: 0.212 Severity: grave Justification: may cause data loss Dear pbuilder Maintainers, pbuilder fails to configure on wheezy (and sid) if /etc/pbuilderrc is a symlink to /etc/pbuilder/pbuilderrc after it replaces /etc/pbuilder/pbuilderrc with a symlink despite pbuilder/rewrite is set to false. * What led up to the situation? I have my pbuilder in a git repository. Hence the complete /etc/pbuilder/ is under version control while /etc/pbuilderrc is not, but a symlink to /etc/pbuilder/pbuilderrc (to have it under version control). * What exactly did you do (or not do) that was effective (or ineffective)? I upgraded today pbuilder from 0.211 to 0.212. It asked me via debconf if it should update pbuilderrc and I denied that question. * What was the outcome of this action? Setting up pbuilder (0.212) ... /var/lib/dpkg/info/pbuilder.config: 40: /var/lib/dpkg/info/pbuilder.config: cannot create /etc/pbuilderrc: Too many levels of symbolic links dpkg: error processing pbuilder (--configure): subprocess installed post-installation script returned error exit status 2 Processing triggers for menu ... Errors were encountered while processing: pbuilder And, even worse: My real pbuilderrc has been deleted despite pbuilder/rewrite being set to false: lrwxrwxrwx 1 root root 13 Aug 23 21:53 /etc/pbuilder/pbuilderrc - ../pbuilderrc lrwxrwxrwx 1 root root 19 Sep 16 13:33 /etc/pbuilderrc - pbuilder/pbuilderrc If I wouldn't have /etc/pbuilder/ in git but choosen that layout for other reasons (and would have no other means of backup), my handcrafted pbuilderrc would have been lost. * What outcome did you expect instead? That it just doesn't touch my handcrafted pbuilderrc independent of its location and that it still would have looked like before: -rw-r--r-- 1 root root 858 Sep 30 14:20 /etc/pbuilder/pbuilderrc lrwxrwxrwx 1 root root 19 Sep 16 13:33 /etc/pbuilderrc - pbuilder/pbuilderrc (A git checkout pbuilderrc and then a dpkg --configure --pending solved the issue for me. Nevertheless this shouldn't happen.) -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages pbuilder depends on: ii cdebconf [debconf-2.0] 0.175 ii cdebootstrap0.5.9 ii coreutils 8.13-3.2 ii debconf [debconf-2.0] 1.5.46 ii debianutils 4.3.2 ii debootstrap 1.0.42 ii dpkg-dev1.16.8 ii wget1.13.4-3 Versions of packages pbuilder recommends: ii devscripts 2.12.4 ii fakeroot1.18.4-2 ii sudo1.8.5p2-1 Versions of packages pbuilder suggests: ii cowdancer 0.70 ii gdebi-core0.8.5 pn pbuilder-uml none -- debconf information: pbuilder/mirrorsite: http://ftp.ch.debian.org/debian/ pbuilder/nomirror: pbuilder/rewrite: false -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#595694: Not found in current libreoffice in testing
Libreoffice-impress version 1:3.5.4+dfsg-2 does not have exactly this behavior for whatever reason. If the maintainers are sure that the bug no more exists, they may feel free to close this bug report. -- Jaakov -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689208: apt-cacher: Does not work with virtualbox-repository
On Sun, Sep 30, 2012 at 01:14:04PM +0200, Tobias Frost wrote: Package: apt-cacher Version: 1.7.5 Severity: normal THanks. Does 1.7.4 exhibit the same behaviour? Mark -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#688212: fonts-inconsolata: Please update Inconsolata to version 1.011
(Raph, this comes from a bug report in Debian bug tracking system : http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=688212) Quoting Erik Bernstein (e...@fscking.org): Package: fonts-inconsolata Version: 001.010-4 Severity: normal Hi, I've noticed that in a few cases rxvt-unicode has problems with font fallback for some unicode characters with Inconsolata 1.010. You can reproduce the problem as follows: 1. open a terminal and run urxvt -fn xft:inconsolata:medium:size=12 2. execute: LANG=en_US.utf8 man groff | less -p bug-groff Have a look at the borked characters surrounding email-addresses and urls. With Inconsolata 1.011 everything seems to be fine. Sorry for answering quite late. First of all, we'll need to keep a new upstream only in experimental as of now, because a new upstream version doesn't fit the freeze policy. Still, I'd be happy to package this new upstream versionif only I could find a place to download it. I went here and there on Raph Levien's website and the links on the Inconsolata page all lead me to the 1.010 version. signature.asc Description: Digital signature
Bug#633769: python-gtk2: crashes as soon as a call to set_events is done
Hi, Apparently, this is not a bug. - It's not specific to this package since it can be reproduced with the following C code: --- #include gtk/gtk.h #include gdk/gdk.h int main(int argc, char* argv[]) { gtk_init(argc, argv); GdkWindow* rootwin = gdk_get_default_root_window(); gdk_window_set_events(rootwin, GDK_BUTTON_PRESS_MASK); gtk_main(); return 0; } --- gcc -o test script.c -g $(pkg-config --libs gtk+-2.0 --cflags) ./test The program 'test' received an X Window System error. This probably reflects a bug in the program. The error was 'BadAccess (attempt to access private resource denied)'. (Details: serial 111 error_code 10 request_code 2 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) - This happens when the event we try to grab is already listened by a program (here, the window manager). The following raises no problem: Xephyr :3 DISPLAY=:3 ./test But the bug is reproduced with Xephyr :3 DISPLAY=:3 awesome DISPLAY=:3 ./test Where test is either the compiled C program or the following python code: --- #!/usr/bin/env python import gtk rootwin = gtk.gdk.get_default_root_window() rootwin.set_events(gtk.gdk.BUTTON_PRESS_MASK) gtk.main() --- Maybe this bug should be marked as done since it appears to be normal behaviour for gtk2 [1]. [1] http://comments.gmane.org/gmane.comp.gnome.lib.gtk%2B.devel.apps/5895 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#668473: Not found in current openclipart2
When installing openclipart2 version 2.0-2 with parts -libreoffice, -png, and -svg, the behaviour does not occur. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689208: apt-cacher: Does not work with virtualbox-repository
On Sun, Sep 30, 2012 at 01:14:04PM +0200, Tobias Frost wrote: Package: apt-cacher Version: 1.7.5 Severity: normal Actually, I think I have found this. Do you have disk_usge_limit configured? I think this patch fixes it: diff --git a/apt-cacher b/apt-cacher index 6e5bd47..b3863aa 100755 --- a/apt-cacher +++ b/apt-cacher @@ -1644,7 +1644,8 @@ sub libcurl { if (defined($statfs = df($cfg-{'cache_dir'}, 1)) $response-header('Content-Length') $response-header('Content-Length') = $statfs-{bavail} || - $cfg-{_disk_usage_limit} $statfs-{used} + $response-header = $cfg-{_disk_usage_limit}) { + $cfg-{_disk_usage_limit} + $statfs-{used} + $response-header('Content-Length') = $cfg-{_disk_usage_limit}) { info_message('ALARM: Insuffient space for Content-Length: '. $response-header('Content-Length'). ' in cache_dir with ' . $statfs-{bavail} . ' available space'); -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689214: btanks crashes in Team DeathMatch mode
Package: btanks Version: 0.9.8083-4 Severity: normal Console message: [16:32:58.783][engine/src/config.cpp:296][debug] cleaning up config... And game exiting -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (790, 'testing'), (700, 'testing'), (690, 'stable'), (630, 'stable-updates'), (600, 'stable'), (151, 'unstable'), (10, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-3-amd64 (SMP w/1 CPU core) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages btanks depends on: ii btanks-data 0.9.8083-4 ii libc62.13-35 ii libexpat12.1.0-1 ii libgcc1 1:4.7.1-7 ii liblua5.1-0 5.1.5-4 ii libsdl-image1.2 1.2.12-2 ii libsdl1.2debian 1.2.15-5 ii libsmpeg00.4.5+cvs20030824-4 ii libstdc++6 4.7.1-7 ii libvorbisfile3 1.3.2-1.3 ii libx11-6 2:1.5.0-1 ii zlib1g 1:1.2.7.dfsg-13 btanks recommends no packages. btanks suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#634890: klibc does not work on armhf
maximilian attems dixit: nice, work!! Thanks. This was bugging me for a while already, and yesterday I looked at it with “a fresh mind”. (Also had a look at IA64 and SH4, but the former is really strange, and no gdb on the latter’s porterbox.) Just flacky internet today, I'll have a full look tomorrow to incorporate. OK, thanks. I think one of the ARM guys or jak can do a test-boot with an initrd made from the fixed klibc and without busybox, and rebuilding mksh on armhf with it would also show success (in fact, once you uploaded, I’ll ask for a binNMU of mksh on armhf anyway). bye, //mirabilos -- gcc ncal.c: In function 'parsemonth': warning: comparison between pointer and integer • mirabilos ↑ hab da „in function parselmouth“ gelesen Natureshadow ICH AUCH! • Natureshadow Ich hab gerade gedacht Häh? Wie, hab da parselmouth gelesen ... steht da doch auch :o? -- too much fanfic… -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#668473: Not found on amd64
While uninstalling and installing libreoffice-writer2xhtml version 1.0.2-8 on amd64, the erroneous behaviour does not occur. However, the default-jre (1:1.6-47) for that architecture is openjdk-6-jre (6b24-1.11.4-3). Alas, I cannot test other JREs now. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689215: funguloids: Please check package depencies
Package: funguloids Version: Sid Severity: normal Can't install funguloids smc together Aptitude: ruslan@debian:~$ sudo aptitude install funguloids smc Следующие НОВЫЕ пакеты будут установлены: funguloids libcg{a} libcggl{a} libogremain-1.6.4{a} libois-1.2.0{a} nvidia- cg-dev{a} nvidia-cg-toolkit{a} ogre-plugins-cgprogrammanager{a} 0 пакетов обновлено, 8 установлено новых, 0 пакетов отмечено для удаления, и 28 пакетов не обновлено. Необходимо получить 23,9 MB архивов. После распаковки 61,1 MB будет занято. Следующие пакеты имеют неудовлетворённые зависимости: libogre-1.7.4 : Ломает: libogremain-1.6.4 но устанавливается 1.6.4.dfsg1-1. Следующие действия разрешат зависимости: Удалить следующие пакеты: 1) libcegui-mk2-0.7.6 2) libogre-1.7.4 3) smc 4) smc-music Принять данное решение? [Y/n/q/?] q Отмена всех результатов по разрешению данных зависимостей. Прервать. Apt-get: [sudo] password for ruslan: Чтение списков пакетов... Готово Построение дерева зависимостей Чтение информации о состоянии... Готово Уже установлена самая новая версия smc. Некоторые пакеты невозможно установить. Возможно, вы просите невозможного, или же используете нестабильную версию дистрибутива, где запрошенные вами пакеты ещё не созданы или были удалены из Incoming. Следующая информация, возможно, поможет вам: Пакеты, имеющие неудовлетворённые зависимости: funguloids : Зависит: libogremain-1.6.4 но он не будет установлен Зависит: ogre-plugins-cgprogrammanager но он не будет установлен E: Невозможно исправить ошибки, у вас отложены (held) битые пакеты. May be funguloids depends from libogremain-1.6.4, but it is only in stable -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (790, 'testing'), (700, 'testing'), (690, 'stable'), (630, 'stable-updates'), (600, 'stable'), (151, 'unstable'), (10, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-3-amd64 (SMP w/1 CPU core) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash
Bug#689216: lxterminal: Problem shortcuts ctrl+shift+c and ctrl+shift+v
Package: lxterminal Version: 0.1.11-4 Severity: normal Dear Maintainer, I use bash : - when I do ctrl+shift+c it makes a copy, but displays ^c and stop the command - when I do ctrl+shift+v it makes a paste, but adds ^M at the end of the command Thank, Regards -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages lxterminal depends on: ii libatk1.0-0 2.4.0-2 ii libc6 2.13-35 ii libcairo2 1.12.2-2 ii libfontconfig1 2.9.0-7 ii libfreetype62.4.9-1 ii libgdk-pixbuf2.0-0 2.26.1-1 ii libglib2.0-02.33.12+really2.32.4-1 ii libgtk2.0-0 2.24.10-2 ii libpango1.0-0 1.30.0-1 ii libvte9 1:0.28.2-5 ii libx11-62:1.5.0-1 lxterminal recommends no packages. lxterminal suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#603460: Connector hatch area is not properly displayed.
On libreoffice-impress 1:3.5.4+dfsg-2 the hatch is displayed, but the border of the hatched area is not a circle, but an octagon that contains the circle. Thus, the bug continues to exist in a different form. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689217: please use a version control system for packaging
Package: ucblogo Version: 5.5-2.1 Severity: wishlist -BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Hi, I'm looking around for an educational turtle graphics (logo) implementation. UCBLogo seems to be unmaintained upstream and in Debian? What's the status of packaging the ~new~ version 6.0? In any case it would be nice, if we could use a VCS, probably Git for this package. In case I'd be interested in packaging the new version, would you mind, if I'd start a Git repo for it on alioth? Regards, Thomas Koch -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAEBCAAGBQJQaEFeAAoJEAf8SJEEK6ZaXv0P/0g2pqsZv2x7VgLnYWJ8PhS4 jxk63MyojEc2T/RIWy3BxZYM7KwkSh/2YNeJmMGQjf+riY7l8dLFForNVtNQQvmH PUL5K3AVP5po+AGXJUadnmQW2LHlX84/dQ5D3ghI5znHZ46/OJHDZfYTu6deFiOj cgicMU2UvvgbhZy6YdOYCSpdYw+XoTLdBVMnuBqt90+UJ0yc/AkXIlvHrCyrvEns zQPAoK0Q+w06HUPFPtNaASc+VqLhyAM6a3JQ+o885rpDtXG4LlP1zt1RN4e0lEeK Ce006UcSJiE/xKdgTCwIPqTOKXc7W9Ltklt4xsSz8EJMsfdMWN8Jc8kDNKQxpM2E FpCwy3uqHj780vFOEcRevfoLOleU9UGVQTKovHLcYnyOtDoyz2O78uL/kcX9e+nZ aHbbTqsf/VJUxihF6cdlPcBPX4CVJ9IkTUL0jVgBYihyGEZg/Y7K854qtHbHgrL7 HJbwJREYWVybueSkl8k5q5icI0hN4uEVoMV2tlbJ1stMeX8D4xulEB8NTARTDNXi Zrk4N31GE3Ki9ny+e3dF+Sx//tBBnVe8rzStLsJUEnU3VLNEhPy8dN2fyoczQd/R 9xDWKKyi+Ks26ylsM6iZqTbHzF5cO+df2ojvUIhUs40EtSwOai1lD82sqildXwRl PrQVZ90lDW6G1eZlbXNl =6zz/ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#603472: (no subject)
Not found in libreoffice-impress 1:3.5.4+dfsg-2 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#626079: merge with ITP
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 merge 626079 656044 thanks gcc-4.5 is not in sid, so I merge this with ITP for gcc-4.6-doc. Regards, Guo Yixuan -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQIcBAEBCAAGBQJQaEJkAAoJEFVCl+35zKWFl+AP/1GUwBlZFGUpzBnKGOQ5nTpz 1NmB5G7Peq/jo8oqG/djjt+JnbO+jNoDB7+A3PPdBnv6P+rBtp05M0fDH9qabg2s Yywo6jhvZTwUlax+CkULD1Zq6DGV//AIBbonGkA0oFqU3hweHYRiLBtzioQ1G71S MChzYwO6FJti0/PBLQJ9v6GytcJWwqCIdjfUGhMeyCXVq3zLDHMoBb16N3coep/g ewScpCChJnuxM4Jp/M7KOWrOQt/LACLUdFIrzrq+hWEgHqSGXPcjZ1OZVl5A2T0O A33ybeaUdI4HCzOaOKjtaeVlTEb9NwI2cqUUe+krqxEq1aYRtf/BR3SnfDPx2vl1 sNbKXx8fNGxF/IfWlcd0hd6TGiklXGNhPb7hUc+4Sor2ZQ9GAXld0y7+0QT/4ASI JESYbS+vZ5VmhJiUGibqbzVB4V1rJ+pB9c4wN7P96dPjPqJG7jbbWPYchqGdQGsg g222F2DB+FdwWXH26UGz/qaeU13Z1dzPfotoO1jCRzB3Xlfez2lEWPV3fELuEK5h Mouy181wcFS2PDjAql99M0CvTchAzBcsIh+Nsa5k3ED2Af1GlLvgWFEVYIYEfPY6 +BLyHYy7NmziBedVcDhu2uJPm86CVugr5D0XM6yHqIjRPxI3cFa2cZ+JbpN/JOet Cdk+FdgUexc5F0wnm/Rx =kFdl -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689208: apt-cacher: Does also not download packages
Package: apt-cacher Followup-For: Bug #689208 Hallo, I tried to pinpoint the error, but I cannot: After deleting the data dir, disabling this two options and running dpkg-reconfigure apt-cacher to recreate the directories, the error is no longer showing up. Also re-enablign both options did not trigger the error again # To enable data checksumming, install libberkeleydb-perl and set this option to # 1. Then wait until the Packages/Sources files have been refreshed once (and so # the database has been built up). You can also delete them from the cache to # trigger the database update. # checksum = 1 # Importing checksums from new index files into the checksum database can cause # high CPU usage on slower systems. This option sets a limit to the number of # index files that are imported simultaneously, thereby limiting CPU load # average, but, possibly, taking longer. Set to 0 for no limit. # concurrent_import_limit = 2 coldtobi -- System Information: Debian Release: wheezy/sid Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-2-amd64 (SMP w/3 CPU cores) Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#595694: Not found in current libreoffice in testing
fixed 595694 libreoffice/1:3.5.4+dfsg-2 thanks On Sun, Sep 30, 2012 at 04:32:04PM +0400, jaakov jaakov wrote: Libreoffice-impress version 1:3.5.4+dfsg-2 does not have exactly this behavior for whatever reason. If the maintainers are sure [...] I am not, but thanks for telling, marking as such :) that the bug no more exists, they may feel free to close this bug report. Well, it automatically will get closed when all openoffice.org bugs get closed because the openoffice.org source package goes away. Regards Rene -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#668473: Not found on amd64
On Sun, Sep 30, 2012 at 04:44:45PM +0400, jaakov jaakov wrote: While uninstalling and installing libreoffice-writer2xhtml version 1.0.2-8 on amd64, the erroneous behaviour does not occur. However, the default-jre (1:1.6-47) for that architecture is openjdk-6-jre (6b24-1.11.4-3). Alas, I cannot test other JREs now. Yeah, you need to install gcj-jdk and select gcj in the options. default-jdk is openjdk (almost) everywhere, but people who have gcj-jdk from older versions might still use gcj-jdk But as Florian said in the comment before yours, this is (and actually never was) reproducible, so.. Regards Rene -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#652513: (no subject)
The web page redirects to another web page, which does not close unexpectedly. Thus, the bug is, strictly speaking, not reproducible at the moment. However, the following messages are printed to console from which epiphany-browser was started: (epiphany-browser:6650): Gtk-CRITICAL **: gtk_device_grab_add: assertion `GDK_IS_DEVICE (device)' failed (epiphany-browser:6650): Gdk-CRITICAL **: gdk_device_grab: assertion `GDK_IS_DEVICE (device)' failed java version 1.7.0_03 OpenJDK Runtime Environment (IcedTea7 2.1.2) (7u3-2.1.2-2) OpenJDK 64-Bit Server VM (build 22.0-b10, mixed mode) ** Message: console message: @0: event.layerX and event.layerY are broken and deprecated in WebKit. They will be removed from the engine in the near future. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#681069: Throws exceptions when run
Control: severity -1 important On Tue, Jul 10, 2012 at 14:28:26 +0200, Yuri D'Elia wrote: Package: linkchecker Severity: normal It seems that the current version doesn't work with either URLs or files: % linkchecker --version LinkChecker 7.9 Copyright (C) 2000-2012 Bastian Kleineidam % linkchecker www.anything [...] File /usr/lib/python2.7/dist-packages/linkcheck/url.py, line 347, in url_norm is_hierarchical = urlparts[0] not in urlparse.non_hierarchical AttributeError: 'module' object has no attribute 'non_hierarchical' I believe the change in python2.7 was reverted, so downgrading. Cheers, Julien signature.asc Description: Digital signature
Bug#689218: unblock: mathematica-fonts/16
Package: release.debian.org Severity: normal User: release.debian@packages.debian.org Usertags: unblock Please unblock package mathematica-fonts, it fixes an important issue via unstable (#686260: allow for translation of all user-visible messages), with a review of all descriptions, update most existing translations (including the eight aiming for being complete in Wheezy) and add a new one. The attach debdiff spares you the POT and PO files. unblock mathematica-fonts/16 Thanks in advance, regards. David P.-S.: This issue is identical to #688876, but filed a separate bug as requested. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.5-trunk-amd64 (SMP w/1 CPU core) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash diff -Nru --exclude po mathematica-fonts-14/debian/changelog mathematica-fonts-16/debian/changelog --- mathematica-fonts-14/debian/changelog 2012-07-13 00:51:15.0 -0400 +++ mathematica-fonts-16/debian/changelog 2012-09-29 19:58:00.0 -0400 @@ -1,3 +1,34 @@ +mathematica-fonts (16) unstable; urgency=low + + * Updated Debconf translations. Thanks to Javier. +Spanish, Javier Fernández-Sanguino Peña. (Closes: #688923) + + -- Atsuhito KOHDA ko...@debian.org Sun, 30 Sep 2012 08:48:14 +0900 + +mathematica-fonts (15) unstable; urgency=low + + * This version was completely owing to the contribution of David Prévot +taffit AT debian.org. Thanks to David. + * Review templates and package description by the debian-l10n-english team. +(Closes: #686260) + + [ Debconf translations ] + * Czech, Martin Šín. (Closes: #687260) + * Russian, Yuri Kozlov. (Closes: #687318) + * Portuguese, Américo Monteiro. (Closes: #687499) + * Polish, Michał Kułach. (Closes: #687552) + * Italian, Beatrice Torracca. (Closes: #687762) + * Danish, Joe Hansen. (Closes: #687832) + * German, Martin Eberhard Schauer. (Closes: #688035) + * French, David Prévot. (Closes: #688152) + * Arabic, Ossama M. Khayat. + * Japanese, victory. + * Vietnamese, Nguyễn Vũ Hưng. + * Swedish, Martin Bagge. (Closes: #688418) + * Spanish, Rafael Ernesto Rivas. + + -- Atsuhito KOHDA ko...@debian.org Fri, 07 Sep 2012 17:59:30 -0400 + mathematica-fonts (14) unstable; urgency=low * Fixed packaging: create directories for the fonts with debian/dirs diff -Nru --exclude po mathematica-fonts-14/debian/control mathematica-fonts-16/debian/control --- mathematica-fonts-14/debian/control 2009-12-28 06:36:28.0 -0400 +++ mathematica-fonts-16/debian/control 2012-09-24 20:22:53.0 -0400 @@ -12,13 +12,13 @@ Provides: ttf-mathematica4.1 Conflicts: ttf-mathematica4.1 ( 9) Replaces: ttf-mathematica4.1 ( 9) -Description: Installer of Mathematica fonts - This package downloads Mathematica fonts through an internet - and installs them, because the license prohibits distribution of - the fonts. NOTE the fonts might be removed from a web site so it - might happen that you failed to download the fonts. +Description: installer for Mathematica fonts + This package downloads Mathematica fonts from http://support.wolfram.com/ + and installs them, because the license prohibits their distribution. + Please note that it may fail if the web site no longer offers them for + download. . - This package will install only AFM, TTF and Type1 at present. + This package will currently only install AFM, TTF, and Type1 fonts. Package: ttf-mathematica4.1 Architecture: all diff -Nru --exclude po mathematica-fonts-14/debian/templates mathematica-fonts-16/debian/templates --- mathematica-fonts-14/debian/templates 2009-06-23 18:44:44.0 -0400 +++ mathematica-fonts-16/debian/templates 2012-09-24 20:22:53.0 -0400 @@ -1,11 +1,20 @@ +# These templates have been reviewed by the debian-l10n-english +# team +# +# If modifications/additions/rewording are needed, please ask +# debian-l10n-engl...@lists.debian.org for advice. +# +# Even minor modifications require translation updates and such +# changes should be coordinated with translators and reviewers. + Template: mathematica-fonts/http_proxy Type: string _Description: HTTP proxy to use: If you need to use a proxy server, please enter it here (example: http://192.168.0.1:8080). This will cause the font file to be - downloaded using your proxy. + downloaded through the proxy. . - Leave this option blank if you don't use a proxy server. + Leave this field blank if you don't use a proxy server. Template: mathematica-fonts/license Type: note @@ -14,7 +23,7 @@ # This debconf note displays the original license of fonts # The license terms themselves are not translatable, which explains # that translators do not see them in the PO files -Description: License for Mathematica fonts +_Description: License for Mathematica
Bug#686547: unblock: calibre/0.8.64+dfsg-1
On Sat, Sep 15, 2012 at 20:34:45 +0200, Arno Töll wrote: Hi, I've prepared a t-p-u upload for calibre fixing _only_ #653328. I'm slightly confused, why you ask for an update through t-p-u if you intend to unblock 0.8.64+dfsg-1 which is in Sid currently and fixes the issues outlined. Did anybody say we intend to unblock 0.8.64? I didn't upload the update, because of the bugs mentioned in this bug report. There are basically two alternatives as it looks: 1) Do a t-p-u for calibre fixing #653328 only. That's what I did, find a debdiff attached below (note, however, it needs a new original tarball). The full source and binary packages are available on [1]. Feel free to upload, or tell me to upload it if you want to go that track. 2) Unblock 0.8.64+dfsg-1 which adds an entirely new upstream release which fixes the problems outlined in this bug, and ships quick_start.epub with liberated license terms - so no update is needed beyond umblocking calibre There's a third: 3) upload to tpu a fix for whatever issues are serious enough, not just #653328. Cheers, Julien signature.asc Description: Digital signature
Bug#689219: RFS: libcdk5/5.0.20120323-1 [ITA] -- C-based curses widget library
Package: sponsorship-requests Severity: normal Dear mentors, I am looking for a sponsor for my package libcdk5 * Package name: libcdk5 Version : 5.0.20120323-1 Upstream Author : Thomas Dickey dic...@invisible-island.net * URL : http://invisible-island.net/cdk/ * License : BSD-4-clause Section : libs It builds those binary packages: libcdk5- C-based curses widget library libcdk5-dev - C-based curses widget library (development files) To access further information about this package, please visit the following URL: http://mentors.debian.net/package/libcdk5 Alternatively, one can download the package with dget using this command: dget -x http://mentors.debian.net/debian/pool/main/libc/libcdk5/libcdk5_5.0.20120323-1.dsc Changes since the last upload: libcdk5 (5.0.20120323-1) unstable; urgency=low * New maintainer (Closes: #570267). * New upstream release (Closes: #520872). * Standards version 3.9.3. * debian/control: - Add Homepage field and remove from packages descriptions. - Remove trailing spaces in packages descriptions. * debian/rules: - Simplify with help of debhelper. - Enable security hardening build flags. * Remove patches applied upstream: - debian/patches/cal_segfault.patch - debian/patches/libcdk5_man_cdk_display_examples_fix.diff * Remove debian/patches/orig_debian_changes.patch. Not needed anymore. * debian/patches/explicitly_link_with_ncurses.patch: use DEP-3 format. * debian/patches/missing_header_examples.patch: fix /demos Makefile.in. * Fix manpages containing a hyphen where a minus sign was intended. Patch fix_hyphen-used-as-minus-sign.patch * Move cdk.h to /usr/include/cdk and remove cdk_test.h from there. Patch header_in_include_and_rm_test_h.patch * debian/copyright: rewrite to machine-readable format. * libcdk5-dev.install: add usr/bin/cdk5-config (Anthony Fok's patch). * Add debian/watch file. Regards, Jose G. López signature.asc Description: This is a digitally signed message part
Bug#689220: /usr/bin/apt-get: apt-get changelog fallbacks to inexistent URLs for changelogs
Package: apt Version: 0.9.7.5 Severity: minor File: /usr/bin/apt-get Hi, I tried today to get the changelog for the keystone package, at a time where the changelog wasn't yet available on packages.debian.org, and it seems that apt-get tried to get it from my local mirror: orsac@scapa: apt-get changelog keystone Err Changelog for keystone (http://packages.debian.org/changelogs/pool/main/k/keystone/keystone_2012.1.1-8/changelog) 404 Not Found [IP: 194.177.211.202 80] Err Changelog for keystone (http://ftp.fr.debian.org/debian/pool/main/k/keystone/keystone_2012.1.1-8.changelog) 404 Not Found [IP: 212.27.32.66 80] E: changelog download failed This is transient since now the changelog has appeared on p.d.o, but still, mirror are not supposed to have the changelog anyway, afaict, so there's no point checking them. Regards, -- Yves-Alexis -- Package-specific info: -- apt-config dump -- APT ; APT::Architecture amd64; APT::Build-Essential ; APT::Build-Essential:: build-essential; APT::Install-Recommends false; APT::Install-Suggests 0; APT::NeverAutoRemove ; APT::NeverAutoRemove:: ^firmware-linux.*; APT::NeverAutoRemove:: ^linux-firmware$; APT::NeverAutoRemove:: ^linux-image.*; APT::NeverAutoRemove:: ^kfreebsd-image.*; APT::NeverAutoRemove:: ^linux-restricted-modules.*; APT::NeverAutoRemove:: ^linux-ubuntu-modules-.*; APT::NeverAutoRemove:: ^gnumach$; APT::NeverAutoRemove:: ^gnumach-image.*; APT::Never-MarkAuto-Sections ; APT::Never-MarkAuto-Sections:: metapackages; APT::Never-MarkAuto-Sections:: restricted/metapackages; APT::Never-MarkAuto-Sections:: universe/metapackages; APT::Never-MarkAuto-Sections:: multiverse/metapackages; APT::Never-MarkAuto-Sections:: oldlibs; APT::Never-MarkAuto-Sections:: restricted/oldlibs; APT::Never-MarkAuto-Sections:: universe/oldlibs; APT::Never-MarkAuto-Sections:: multiverse/oldlibs; APT::Architectures ; APT::Architectures:: amd64; APT::Compressor ; APT::Compressor::. ; APT::Compressor::.::Name .; APT::Compressor::.::Extension ; APT::Compressor::.::Binary ; APT::Compressor::.::Cost 1; APT::Compressor::gzip ; APT::Compressor::gzip::Name gzip; APT::Compressor::gzip::Extension .gz; APT::Compressor::gzip::Binary gzip; APT::Compressor::gzip::Cost 2; APT::Compressor::gzip::CompressArg ; APT::Compressor::gzip::CompressArg:: -9n; APT::Compressor::gzip::UncompressArg ; APT::Compressor::gzip::UncompressArg:: -d; APT::Compressor::bzip2 ; APT::Compressor::bzip2::Name bzip2; APT::Compressor::bzip2::Extension .bz2; APT::Compressor::bzip2::Binary bzip2; APT::Compressor::bzip2::Cost 3; APT::Compressor::bzip2::CompressArg ; APT::Compressor::bzip2::CompressArg:: -9; APT::Compressor::bzip2::UncompressArg ; APT::Compressor::bzip2::UncompressArg:: -d; APT::Compressor::xz ; APT::Compressor::xz::Name xz; APT::Compressor::xz::Extension .xz; APT::Compressor::xz::Binary xz; APT::Compressor::xz::Cost 4; APT::Compressor::xz::CompressArg ; APT::Compressor::xz::CompressArg:: -6; APT::Compressor::xz::UncompressArg ; APT::Compressor::xz::UncompressArg:: -d; APT::Compressor::lzma ; APT::Compressor::lzma::Name lzma; APT::Compressor::lzma::Extension .lzma; APT::Compressor::lzma::Binary xz; APT::Compressor::lzma::Cost 5; APT::Compressor::lzma::CompressArg ; APT::Compressor::lzma::CompressArg:: --format=lzma; APT::Compressor::lzma::CompressArg:: -9; APT::Compressor::lzma::UncompressArg ; APT::Compressor::lzma::UncompressArg:: --format=lzma; APT::Compressor::lzma::UncompressArg:: -d; APT::CompressorName ; APT::CompressorExtension .; APT::CompressorBinary ; APT::CompressorCost 100; APT::CompressorCompressArg ; APT::CompressorCompressArg:: -9; APT::CompressorUncompressArg ; APT::CompressorUncompressArg:: -d; Dir /; Dir::State var/lib/apt/; Dir::State::lists lists/; Dir::State::cdroms cdroms.list; Dir::State::mirrors mirrors/; Dir::State::extended_states extended_states; Dir::State::status /var/lib/dpkg/status; Dir::Cache var/cache/apt/; Dir::Cache::archives archives/; Dir::Cache::srcpkgcache srcpkgcache.bin; Dir::Cache::pkgcache pkgcache.bin; Dir::Etc etc/apt/; Dir::Etc::sourcelist sources.list; Dir::Etc::sourceparts sources.list.d; Dir::Etc::vendorlist vendors.list; Dir::Etc::vendorparts vendors.list.d; Dir::Etc::main apt.conf; Dir::Etc::netrc auth.conf; Dir::Etc::parts apt.conf.d; Dir::Etc::preferences preferences; Dir::Etc::preferencesparts preferences.d; Dir::Etc::trusted trusted.gpg; Dir::Etc::trustedparts trusted.gpg.d; Dir::Bin ; Dir::Bin::methods /usr/lib/apt/methods; Dir::Bin::solvers ; Dir::Bin::solvers:: /usr/lib/apt/solvers; Dir::Bin::dpkg /usr/bin/dpkg; Dir::Bin::bzip2 /bin/bzip2; Dir::Bin::xz /usr/bin/xz; Dir::Media ; Dir::Media::MountPath /media/apt; Dir::Log var/log/apt; Dir::Log::Terminal term.log; Dir::Log::History history.log; Dir::Ignore-Files-Silently ; Dir::Ignore-Files-Silently:: ~$; Dir::Ignore-Files-Silently:: \.disabled$; Dir::Ignore-Files-Silently:: \.bak$; Dir::Ignore-Files-Silently:: \.dpkg-[a-z]+$; Dir::Ignore-Files-Silently:: \.save$;
Bug#689217: please use a version control system for packaging
On Sun, Sep 30, 2012 at 02:56:06PM +0200, Thomas Koch wrote: Package: ucblogo Version: 5.5-2.1 Severity: wishlist -BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Hi, I'm looking around for an educational turtle graphics (logo) implementation. UCBLogo seems to be unmaintained upstream and in Debian? What's the status of packaging the ~new~ version 6.0? In any case it would be nice, if we could use a VCS, probably Git for this package. In case I'd be interested in packaging the new version, would you mind, if I'd start a Git repo for it on alioth? Thomas, you are welcome to adopt the ucblogo package if you wish. I am not using it and not really active on packaging lately. thanks, Hamish -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#686212: [BTS#686212] templates://lsh-utils/{lsh-server.templates,control}
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Hi Magnus, Le 30/09/2012 07:23, Magnus Holmgren a écrit : […] you initiated the process and I'll be happy to finish it, even though it doesn't feel like the most urgent thing, as long as it's covered by the freeze exception policy, which it still is, right? As a “translation updates and documentation fixes;” (point 3.), it still is. I can handle the unblock request on your behalf if you wish. Now the Spanish translation has been updated too. Yep, that took some time, sorry for that. That's also why I send you complete patch [0] (as an “approved to be uploaded” by the i18n team ;). 0: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=686212#64 Regards David -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAEBCAAGBQJQaEmzAAoJELgqIXr9/gnyaV8P/2V7xL9/kemJSoFexo6k1Y+B IktuZtBzOnkzNmvCAZ7USyqhYlMClnk+0W6QqrcsJ9VVMrLxmZi3RufmU9fs9uv2 fv9A2luogACguMMXwRA1hjD8nnYJxtDUfykM7zj63WDkTdT/5NbmOp3FpcNHHlBl xHwsbcFRVhlEEwIQDP5QBQzX2E0e6xVMxgbrPQSeGWC4uHijyJf8FHO53h31MkTP USwsekxCZbwAVb2H72Du97XH9kWSMLdI39HXhz2HMnKgqL+cll71379ZAY4HVpXT WSQ/w/RSwkmCr3W/8dW78byfEjmZwbURgdd5PSguAKZNINK4MnuNfgY/v39A4r9O CbHR8jmbTORbWPGJtm2GrI3wUmdybPcy/bCSpY5tnW1m0FHryAKKCRSIqdUGNQHK JxFwIsl6neLFhkz7jgOGiuJVxrtBkuvs2M5uRhHAzt8Z6JWeWd0hz9juRcCGWxlS TGsnKvO0/moF9r/4nKnUtDIWNuIroZFEx+SUoaYg1gQ5pCZhGx04Sw24jCJeOVOq G9Wk8gIZcv3116qww4BrbOiNCH8Tc8Htn/DmEnH2OClp/eY9nIM3HLih9tTd0IZh PK/zY787fRvu7lNNeRuEeiQRUqlkVfEvTLTZZ6OtxWHSJX9Qx7wnFiy6ZjqP+f21 O2kjtdy1aPzgu3xzKNm+ =y/hI -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#688212: fonts-inconsolata: Please update Inconsolata to version 1.011
Hi Christian, Still, I'd be happy to package this new upstream versionif only I could find a place to download it. Try google web fonts: http://www.google.com/webfonts - Search for Inconsolata - Check both styles and click Add to Collection - Click Download Your Collection This should give you 1.011. At least that's what the .ttf tells me. cheers, erik -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689221: installation-reports: QNAP TS-409U does not reboot after installation
Package: installation-reports Severity: important Usertags: pca.it-installation Hi there! Last Sunday (sorry for the delay, RL took most of my free time) I upgraded the QNAP TS-409U to 4x2TB RAID-5 and LVM (no separate /boot partition, given that the machine boots from flash) and thus proceeded to a new installation. Unfortunately, after the installation finished successfully, the machine did not reboot: the system light keeps blinking red/green and network does not work. Thx, bye, Gismo / Luca -- Package-specific info: Boot method: network-console Image version: 20110106+squeeze4+b1 Date: started on 2012-09-23T23:47:26+ Machine: QNAP TS-409U Partitions: df -Tl will do; the raw partition table is preferred root@debian:/# df -Tl FilesystemType 1K-blocks Used Available Use% Mounted on /dev/mapper/jem-root ext3 3842104556568 3090364 16% / /dev/mapper/jem-srv ext3 3842104556568 3090364 16% /srv tmpfstmpfs 25793252257880 1% /dev tmpfstmpfs 25793252257880 1% /dev devpts devpts 25793252257880 1% /dev/pts root@debian:/# sfdisk -d /dev/sda WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted. # partition table of /dev/sda unit: sectors /dev/sda1 : start=1, size=3907029167, Id=ee /dev/sda2 : start=0, size=0, Id= 0 /dev/sda3 : start=0, size=0, Id= 0 /dev/sda4 : start=0, size=0, Id= 0 root@debian:/# Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [E] Detect CD: [ ] Load installer modules: [O] Clock/timezone setup: [O] User/password setup:[O] Detect hard drives: [O] Partition hard drives: [E] Install base system:[O] Install tasks: [O] Install boot loader:[O] Overall install:[E] Comments/Problems: 1) the QNAP did not take its IP from the DHCP server (dnsmasq_2.55-2, MAC address in /etc/ethers and IP in /etc/hosts, tested to work with different machines). While at the first time I did not spend so much time on this issue, thinking about a temporary problem on the internal network (which has not yet completely migrated to the dnsmasq-based infrastructure), it happened again later on. The DHCP server seems to work OK, but the QNAP does not accept the DHCP offer: --8---cut here---start-8--- Sep 25 03:10:04 karon dnsmasq-dhcp[2575]: DHCPDISCOVER(eth1) 00:08:9b:ac:ff:8e Sep 25 03:10:04 karon dnsmasq-dhcp[2575]: DHCPOFFER(eth1) 192.168.210.236 00:08:9b:ac:ff:8e Sep 25 03:10:04 karon dnsmasq-dhcp[2575]: DHCPREQUEST(eth1) 192.168.210.236 00:08:9b:ac:ff:8e Sep 25 03:10:04 karon dnsmasq-dhcp[2575]: DHCPACK(eth1) 192.168.210.236 00:08:9b:ac:ff:8e jem Sep 25 03:10:07 karon dnsmasq-dhcp[2575]: DHCPDISCOVER(eth1) 00:08:9b:ac:ff:8e Sep 25 03:10:07 karon dnsmasq-dhcp[2575]: DHCPOFFER(eth1) 192.168.210.236 00:08:9b:ac:ff:8e Sep 25 03:10:07 karon dnsmasq-dhcp[2575]: DHCPREQUEST(eth1) 192.168.210.236 00:08:9b:ac:ff:8e Sep 25 03:10:07 karon dnsmasq-dhcp[2575]: DHCPACK(eth1) 192.168.210.236 00:08:9b:ac:ff:8e jem Sep 25 03:10:10 karon dnsmasq-dhcp[2575]: DHCPDISCOVER(eth1) 00:08:9b:ac:ff:8e Sep 25 03:10:10 karon dnsmasq-dhcp[2575]: DHCPOFFER(eth1) 192.168.210.236 00:08:9b:ac:ff:8e Sep 25 03:10:10 karon dnsmasq-dhcp[2575]: DHCPREQUEST(eth1) 192.168.210.236 00:08:9b:ac:ff:8e Sep 25 03:10:10 karon dnsmasq-dhcp[2575]: DHCPACK(eth1) 192.168.210.236 00:08:9b:ac:ff:8e jem Sep 25 03:10:14 karon dnsmasq-dhcp[2575]: DHCPDISCOVER(eth1) 00:08:9b:ac:ff:8e Sep 25 03:10:14 karon dnsmasq-dhcp[2575]: DHCPOFFER(eth1) 192.168.210.236 00:08:9b:ac:ff:8e Sep 25 03:10:14 karon dnsmasq-dhcp[2575]: DHCPREQUEST(eth1) 192.168.210.236 00:08:9b:ac:ff:8e Sep 25 03:10:14 karon dnsmasq-dhcp[2575]: DHCPACK(eth1) 192.168.210.236 00:08:9b:ac:ff:8e jem Sep 25 03:10:16 karon dnsmasq-dhcp[2575]: DHCPDISCOVER(eth1) 00:08:9b:ac:ff:8e Sep 25 03:10:16 karon dnsmasq-dhcp[2575]: DHCPOFFER(eth1) 192.168.210.236 00:08:9b:ac:ff:8e --8---cut here---end---8--- Luckily, the network-console falls back to a static IP address (192.168.1.100), so I logged in via SSH and *manually* changed the configuration via `ip`. After the installation, however, /e/n/i contains the static values and not the manual one, which should be: http://bugs.debian.org/688650 NB, I tried to use the Configure the network step, but this cut the SSH connection, which is why I ended up using `ip`. 2) the partition problem is not really a problem, but an annoyance: --8---cut here---start-8--- Sep 24 00:15:18 kernel: [ 1442.413720] mdadm: sending ioctl 1261 to a
Bug#687924: moodle: diff for NMU version 2.2.3.dfsg-2.3
tags 687924 + patch tags 687924 + pending thanks Dear maintainer, I've prepared an NMU for moodle (versioned as 2.2.3.dfsg-2.3) and uploaded it to DELAYED/1. Please feel free to tell me if I should delay it longer. Regards. diff -Nru moodle-2.2.3.dfsg/debian/changelog moodle-2.2.3.dfsg/debian/changelog --- moodle-2.2.3.dfsg/debian/changelog 2012-07-23 19:13:58.0 +0200 +++ moodle-2.2.3.dfsg/debian/changelog 2012-09-28 12:58:50.0 +0200 @@ -1,3 +1,22 @@ +moodle (2.2.3.dfsg-2.3) unstable; urgency=low + + * Non-maintainer upload. + + * Backport multiple security issues from upstream's MOODLE_22_STABLE +branch. (Closes: #687924) +- MSA-12-0051: MDL-30792 - File upload size constraint issue + Fixes CVE-2012-4400 +- MSA-12-0052: MDL-28207 - Course topics permission issue + Fixes CVE-2012-4401 +- MSA-12-0053: MDL-34585 - Blog file access issue + Fixes CVE-2012-4407 +- MSA-12-0054: MDL-34519 - Course reset permission issue + Fixes CVE-2012-4408 +- MSA-12-0055: MDL-34368 - Web service access token issue + Fixes CVE-2012-4402 + + -- Didier Raboud o...@debian.org Fri, 28 Sep 2012 12:52:21 +0200 + moodle (2.2.3.dfsg-2.2) unstable; urgency=low * Non-maintainer upload. diff -Nru moodle-2.2.3.dfsg/debian/patches/0009-MDL-30792-Files-API-maxbytes-will-be-set-by-get_max_.patch moodle-2.2.3.dfsg/debian/patches/0009-MDL-30792-Files-API-maxbytes-will-be-set-by-get_max_.patch --- moodle-2.2.3.dfsg/debian/patches/0009-MDL-30792-Files-API-maxbytes-will-be-set-by-get_max_.patch 1970-01-01 01:00:00.0 +0100 +++ moodle-2.2.3.dfsg/debian/patches/0009-MDL-30792-Files-API-maxbytes-will-be-set-by-get_max_.patch 2012-09-28 12:58:50.0 +0200 @@ -0,0 +1,51 @@ +From ebf253af171efbc5ff3a0074538c85a5edcb2ee2 Mon Sep 17 00:00:00 2001 +From: Rajesh Taneja raj...@moodle.com +Date: Fri, 3 Aug 2012 11:44:20 +0800 +Subject: [PATCH] MDL-30792 Files API: maxbytes will be set by + get_max_upload_file_size if less then 0 or greater then max + moodle limit + +--- + repository/filepicker.php |4 ++-- + repository/repository_ajax.php |8 ++-- + 2 files changed, 8 insertions(+), 4 deletions(-) + +diff --git a/repository/filepicker.php b/repository/filepicker.php +index 68aee10..610ef13 100644 +--- a/repository/filepicker.php b/repository/filepicker.php +@@ -93,9 +93,9 @@ if ($repository = $DB-get_record_sql($sql, array($repo_id))) { + } + } + +-$moodle_maxbytes = get_max_upload_file_size(); ++$moodle_maxbytes = get_max_upload_file_size($CFG-maxbytes, $course-maxbytes); + // to prevent maxbytes greater than moodle maxbytes setting +-if ($maxbytes == 0 || $maxbytes=$moodle_maxbytes) { ++if (($maxbytes = 0) || ($maxbytes = $moodle_maxbytes)) { + $maxbytes = $moodle_maxbytes; + } + +diff --git a/repository/repository_ajax.php b/repository/repository_ajax.php +index b7793c8..b7f76d1 100644 +--- a/repository/repository_ajax.php b/repository/repository_ajax.php +@@ -83,9 +83,13 @@ if (!$repository = $DB-get_record_sql($sql, array($repo_id))) { + /// Check permissions + repository::check_capability($contextid, $repository); + +-$moodle_maxbytes = get_max_upload_file_size(); ++$coursemaxbytes = 0; ++if (!empty($course)) { ++ $coursemaxbytes = $course-maxbytes; ++} ++$moodle_maxbytes = get_max_upload_file_size($CFG-maxbytes, $coursemaxbytes); + // to prevent maxbytes greater than moodle maxbytes setting +-if ($maxbytes == 0 || $maxbytes=$moodle_maxbytes) { ++if (($maxbytes = 0) || ($maxbytes = $moodle_maxbytes)) { + $maxbytes = $moodle_maxbytes; + } + +-- +1.7.10.4 + diff -Nru moodle-2.2.3.dfsg/debian/patches/0010-MDL-30792-Files-API-Cleaner-approach-to-get-maxbytes.patch moodle-2.2.3.dfsg/debian/patches/0010-MDL-30792-Files-API-Cleaner-approach-to-get-maxbytes.patch --- moodle-2.2.3.dfsg/debian/patches/0010-MDL-30792-Files-API-Cleaner-approach-to-get-maxbytes.patch 1970-01-01 01:00:00.0 +0100 +++ moodle-2.2.3.dfsg/debian/patches/0010-MDL-30792-Files-API-Cleaner-approach-to-get-maxbytes.patch 2012-09-28 12:58:50.0 +0200 @@ -0,0 +1,74 @@ +From f7c9e3bb18e9e7fa06dff625042bf9572d709d45 Mon Sep 17 00:00:00 2001 +From: Rajesh Taneja raj...@moodle.com +Date: Fri, 3 Aug 2012 11:47:44 +0800 +Subject: [PATCH] MDL-30792 Files API: Cleaner approach to get maxbytes size + in filepicker + +--- + lib/moodlelib.php |6 +++--- + repository/filepicker.php |7 ++- + repository/repository_ajax.php |7 ++- + 3 files changed, 7 insertions(+), 13 deletions(-) + +diff --git a/lib/moodlelib.php b/lib/moodlelib.php +index 465226a..08b34ee 100644 +--- a/lib/moodlelib.php b/lib/moodlelib.php +@@ -5728,15 +5728,15 @@ function get_max_upload_file_size($sitebytes=0, $coursebytes=0, $modulebytes=0) + } + } + +-if ($sitebytes and $sitebytes $minimumsize) { ++if (($sitebytes 0) and ($sitebytes $minimumsize)) { + $minimumsize = $sitebytes; + } + +-if ($coursebytes and
Bug#689208: apt-cacher: Does not work with virtualbox-repository
Hallo Mark, yes, indeed, disk_usage_limit triggered this. best regards, coldtobi Am Sonntag, den 30.09.2012, 13:36 +0100 schrieb Mark Hindley: On Sun, Sep 30, 2012 at 01:14:04PM +0200, Tobias Frost wrote: Package: apt-cacher Version: 1.7.5 Severity: normal Actually, I think I have found this. Do you have disk_usge_limit configured? I think this patch fixes it: diff --git a/apt-cacher b/apt-cacher index 6e5bd47..b3863aa 100755 --- a/apt-cacher +++ b/apt-cacher @@ -1644,7 +1644,8 @@ sub libcurl { if (defined($statfs = df($cfg-{'cache_dir'}, 1)) $response-header('Content-Length') $response-header('Content-Length') = $statfs-{bavail} || - $cfg-{_disk_usage_limit} $statfs-{used} + $response-header = $cfg-{_disk_usage_limit}) { + $cfg-{_disk_usage_limit} + $statfs-{used} + $response-header('Content-Length') = $cfg-{_disk_usage_limit}) { info_message('ALARM: Insuffient space for Content-Length: '. $response-header('Content-Length'). ' in cache_dir with ' . $statfs-{bavail} . ' available space'); -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#688860: xserver-xorg-input-evdev: mouse cursor jumping with absolute input device
tag 688860 + fixed-upstream patch thanks Fixed in this commit: http://cgit.freedesktop.org/xorg/xserver/commit/?id=3d1051aecbb1955084804133cacd12c7f696833a -- Sam Morris https://robots.org.uk/ 3412 EA18 1277 354B 991B C869 B219 7FDB 5EA0 1078 signature.asc Description: This is a digitally signed message part
Bug#689004: Please enter 2.9.0 in unstable ASAP at least
If I understand correctly the frozen state will previous 2.9 to go to wheezy. -- eric -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689004: Its not just kdegraphics
gwenview kde-full kdeartwork kdegraphics kdegraphics-thumbnailers kdeplasma-addons ksaneplugin kscreensaver ksnapshot libkdcraw-data libkdcraw20 libkexiv2-10 libkexiv2-data libkipi-data libkipi8 libksane-dev libksane0 plasma-widgets-addons --eric -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689222: dietlibc: buffer overflow on armhf
Package: dietlibc-dev Version: 0.33~cvs20120325-3 Severity: critical Justification: buffer overflow The ARM assembly version of sigsetjmp(3) can store up to 42 integers into the jmp_buf, on armhf without NEON it will store 26 integers; the dietlibc jmp_buf only has enough space for 24 integers; thus, any use of sigsetjmp() or setjmp() will overwrite user data. Patch follows. Apparently, it’s armhf fixing weekend (RCBW) for me. bye, //mirabilos -- 13:37⎜«Natureshadow» Deep inside, I hate mirabilos. I mean, he's a good guy. But he's always right! In every fsckin' situation, he's right. Even with his deeply perverted taste in software and borked ambition towards broken OSes - in the end, he's damn right about it :(! […] works in mksh -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#689223: binutils-avr: Linker relaxations broken
Package: binutils-avr Version: 2.20.1-3 Severity: normal Dear Maintainer, * What led up to the situation? Compiling LUFA demo VirtualSerialMassStorage. * What exactly did you do (or not do) that was effective (or ineffective)? cd Demos/Device/ClassDriver/VirtualSerialMassStorage make * What was the outcome of this action? The packe did not compile reporting: /usr/lib/gcc/avr/4.7.0/../../../avr/lib/avr51/crtusb1286.o: In function `__bad_interrupt': ../../../../crt1/gcrt1.S:195: relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_11' defined in .text.__vector_11 section in ../../../../LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.o There is a work around by removing the relaxe option from the build make file: perl -i -pe 's/-Wl,--relax//' LUFA/Build/lufa_build.mk The more correct way is to patch 307 elf32-avr.c: https://github.com/pld-linux/crossavr-binutils/blob/master/307-binutils-fix-AVRTC-424.patch Above information is based on Dean Camera's explanation. cheers! -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/6 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages binutils-avr depends on: ii libc6 2.13-35 binutils-avr recommends no packages. Versions of packages binutils-avr suggests: ii binutils 2.22-6.1 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#687924: moodle: diff for NMU version 2.2.3.dfsg-2.3
Le dimanche, 30 septembre 2012 15.45:03, Didier Raboud a écrit : tags 687924 + patch tags 687924 + pending thanks Dear maintainer, I've prepared an NMU for moodle (versioned as 2.2.3.dfsg-2.3) and uploaded it to DELAYED/1. Please feel free to tell me if I should delay it longer. … and to help reviewing, these are the patches, cherry-picked from upstream's branch if you want to comment. Cheers, OdyX From ebf253af171efbc5ff3a0074538c85a5edcb2ee2 Mon Sep 17 00:00:00 2001 From: Rajesh Taneja raj...@moodle.com Date: Fri, 3 Aug 2012 11:44:20 +0800 Subject: [PATCH] MDL-30792 Files API: maxbytes will be set by get_max_upload_file_size if less then 0 or greater then max moodle limit --- repository/filepicker.php |4 ++-- repository/repository_ajax.php |8 ++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/repository/filepicker.php b/repository/filepicker.php index 68aee10..610ef13 100644 --- a/repository/filepicker.php +++ b/repository/filepicker.php @@ -93,9 +93,9 @@ if ($repository = $DB-get_record_sql($sql, array($repo_id))) { } } -$moodle_maxbytes = get_max_upload_file_size(); +$moodle_maxbytes = get_max_upload_file_size($CFG-maxbytes, $course-maxbytes); // to prevent maxbytes greater than moodle maxbytes setting -if ($maxbytes == 0 || $maxbytes=$moodle_maxbytes) { +if (($maxbytes = 0) || ($maxbytes = $moodle_maxbytes)) { $maxbytes = $moodle_maxbytes; } diff --git a/repository/repository_ajax.php b/repository/repository_ajax.php index b7793c8..b7f76d1 100644 --- a/repository/repository_ajax.php +++ b/repository/repository_ajax.php @@ -83,9 +83,13 @@ if (!$repository = $DB-get_record_sql($sql, array($repo_id))) { /// Check permissions repository::check_capability($contextid, $repository); -$moodle_maxbytes = get_max_upload_file_size(); +$coursemaxbytes = 0; +if (!empty($course)) { + $coursemaxbytes = $course-maxbytes; +} +$moodle_maxbytes = get_max_upload_file_size($CFG-maxbytes, $coursemaxbytes); // to prevent maxbytes greater than moodle maxbytes setting -if ($maxbytes == 0 || $maxbytes=$moodle_maxbytes) { +if (($maxbytes = 0) || ($maxbytes = $moodle_maxbytes)) { $maxbytes = $moodle_maxbytes; } -- 1.7.10.4 From f7c9e3bb18e9e7fa06dff625042bf9572d709d45 Mon Sep 17 00:00:00 2001 From: Rajesh Taneja raj...@moodle.com Date: Fri, 3 Aug 2012 11:47:44 +0800 Subject: [PATCH] MDL-30792 Files API: Cleaner approach to get maxbytes size in filepicker --- lib/moodlelib.php |6 +++--- repository/filepicker.php |7 ++- repository/repository_ajax.php |7 ++- 3 files changed, 7 insertions(+), 13 deletions(-) diff --git a/lib/moodlelib.php b/lib/moodlelib.php index 465226a..08b34ee 100644 --- a/lib/moodlelib.php +++ b/lib/moodlelib.php @@ -5728,15 +5728,15 @@ function get_max_upload_file_size($sitebytes=0, $coursebytes=0, $modulebytes=0) } } -if ($sitebytes and $sitebytes $minimumsize) { +if (($sitebytes 0) and ($sitebytes $minimumsize)) { $minimumsize = $sitebytes; } -if ($coursebytes and $coursebytes $minimumsize) { +if (($coursebytes 0) and ($coursebytes $minimumsize)) { $minimumsize = $coursebytes; } -if ($modulebytes and $modulebytes $minimumsize) { +if (($modulebytes 0) and ($modulebytes $minimumsize)) { $minimumsize = $modulebytes; } diff --git a/repository/filepicker.php b/repository/filepicker.php index 610ef13..fa759c5 100644 --- a/repository/filepicker.php +++ b/repository/filepicker.php @@ -93,11 +93,8 @@ if ($repository = $DB-get_record_sql($sql, array($repo_id))) { } } -$moodle_maxbytes = get_max_upload_file_size($CFG-maxbytes, $course-maxbytes); -// to prevent maxbytes greater than moodle maxbytes setting -if (($maxbytes = 0) || ($maxbytes = $moodle_maxbytes)) { -$maxbytes = $moodle_maxbytes; -} +// Make sure maxbytes passed is within site filesize limits. +$maxbytes = get_max_upload_file_size($CFG-maxbytes, $coursemaxbytes, $maxbytes); $params = array('ctx_id' = $contextid, 'itemid' = $itemid, 'env' = $env, 'course'=$courseid, 'maxbytes'=$maxbytes, 'maxfiles'=$maxfiles, 'subdirs'=$subdirs, 'sesskey'=sesskey()); $params['action'] = 'browse'; diff --git a/repository/repository_ajax.php b/repository/repository_ajax.php index b7f76d1..f8c9fe5 100644 --- a/repository/repository_ajax.php +++ b/repository/repository_ajax.php @@ -87,11 +87,8 @@ $coursemaxbytes = 0; if (!empty($course)) { $coursemaxbytes = $course-maxbytes; } -$moodle_maxbytes = get_max_upload_file_size($CFG-maxbytes, $coursemaxbytes); -// to prevent maxbytes greater than moodle maxbytes setting -if (($maxbytes = 0) || ($maxbytes = $moodle_maxbytes)) { -$maxbytes = $moodle_maxbytes; -} +// Make sure maxbytes passed is within site filesize limits. +$maxbytes = get_max_upload_file_size($CFG-maxbytes, $coursemaxbytes, $maxbytes); /// Wait as long as it takes for this script to finish set_time_limit(0); --
Bug#689224: libboost-all-dev: Please package boost 1.51.0
Package: libboost-all-dev Version: 1.49.0.1 Severity: wishlist Boost is a wonderful package! Thanks for packaging it! Right now, version 1.49.0.1 is in the archive, but there are some new features and bug fixes in 1.50.0 and 1.51.0 (the latest as of this writing) that are really important useful (such as Boost Context, better C++11 support in many libraries including Boost Thread, etc). So please package the newest version of Boost, because then we can all use the awesome new features without compiling a local copy ourselves! -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (40, 'experimental') Architecture: i386 (x86_64) Kernel: Linux 3.5-trunk-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libboost-all-dev depends on: ii libboost-chrono-dev 1.49.0.1 ii libboost-date-time-dev1.49.0.1 ii libboost-dev 1.49.0.1 ii libboost-filesystem-dev 1.49.0.1 ii libboost-graph-dev1.49.0.1 ii libboost-graph-parallel-dev 1.49.0.1 ii libboost-iostreams-dev1.49.0.1 ii libboost-locale-dev 1.49.0.1 ii libboost-math-dev 1.49.0.1 ii libboost-mpi-dev 1.49.0.1 ii libboost-mpi-python-dev 1.49.0.1 ii libboost-program-options-dev 1.49.0.1 ii libboost-python-dev 1.49.0.1 ii libboost-random-dev 1.49.0.1 ii libboost-regex-dev1.49.0.1 ii libboost-serialization-dev1.49.0.1 ii libboost-signals-dev 1.49.0.1 ii libboost-system-dev 1.49.0.1 ii libboost-test-dev 1.49.0.1 ii libboost-thread-dev 1.49.0.1 ii libboost-timer-dev1.49.0.1 ii libboost-wave-dev 1.49.0.1 libboost-all-dev recommends no packages. libboost-all-dev suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#657395: Bug#680546: RFS: cinnamon/1.6.1-1 [ITP] -- Innovative and comfortable desktop
Hi Thomas! On 30/09/2012 09:06, Thomas Goirand wrote: Your packaging git is on Github, any reason why you don't use Alioth instead? I would definitively like to use Alioth instead of GitHub but when I did the first version I was not sure about using collab-maint or a dedicated project. Moreover at the time of this first version, I was not a DM yet (I am now since 6 weeks) and I needed an advocate to join collab-maint (if using collab-maint). So I thought it was better to find a sponsor to figure out with him where to host the packaging sources. I've tried it (currently running it on my Wheezy laptop), and I like it! :) I am happy that you like it. I think it is a good compromise between GNOME 2 and GNOME shell and actually it best suits my need for daily work: this is why I've packaged it. Did you take the packaging work directly from Mint? What exactly did you change from them? Actually, I started initially from their package but I quickly discovered that they did not put too much attention to the Debian packaging: they've imported it from the Ubuntu gnome-shell package and just minimally adapted to the need of the fork. There were few glitches. So at that point I decided mainly to reuse only the dependency part of their control file and to redo the rest: Updating the new Debian policy using dh sequencer instead of CDBS Updating to the compatibility level of debhelper 9 Removing the useless break/replace fields Making debian/copyright DEP5 compliant fixing lintian warning/error adding a working debian/watch Adding a debug package applied few patches that have been accepted stream in between ... Well you can consider that besides reusing an updated dependency lists in the control file and the same subdivision of packages, everything else have been changed. Do you consider to sponsor it? :-) Cheers, Nicolas Bourdaud signature.asc Description: OpenPGP digital signature
Bug#687924: moodle: diff for NMU version 2.2.3.dfsg-2.3
On 09/30/2012 04:24 PM, Didier 'OdyX' Raboud wrote: Le dimanche, 30 septembre 2012 15.45:03, Didier Raboud a écrit : tags 687924 + patch tags 687924 + pending thanks Dear maintainer, I've prepared an NMU for moodle (versioned as 2.2.3.dfsg-2.3) and uploaded it to DELAYED/1. Please feel free to tell me if I should delay it longer. … and to help reviewing, these are the patches, cherry-picked from upstream's branch if you want to comment. Much appreciated, thank you for your help OdyX. Tomek -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#637256: cheese: Cheese crashes when switching from photo- to videomode
Hi, I'm unable to reproduce this bug with the current Wheezy version (3.4.2-1). Could you check that it is still present please ? If so, a backtrace could be usefull ( http://wiki.debian.org/HowToGetABacktrace ). -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#606939: reopen 606939
reopen 606939 thanks Hey It seems this issue is still around, I hope you don't mind if I re-open this bug. I have the exact same problem happening right now on wheezy using an Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03). I tried downgrading libcairo2 since that seems to be a common source for font rendering issues but it didn't help (I tried 1.10.2-7 which was recommended in some other bug report). If you have any other ideas for things to try, please let me know. In case it matters, the Xorg log is attached. cheers -- Stefan Ott http://www.ott.net/ You are not Grey Squirrel? Xorg.0.log Description: Binary data
Bug#683795: Error on downloading dailymotion videos
Hi, Upstream recently fixed your issue (cf. the master branch). Youtube-dl still fails with some Dailymotion videos, though. I submitted a patch upstream (https://github.com/rg3/youtube-dl/issues/446), and I hope it will be enough to fix it. WBR, Cyril Roelandt. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org