Bug#1011777: Same problem with 5.18.0-2-alpha-smp kernel
Same problem with 5.18.0-2-alpha-smp kernel (5.18.0-2-alpha-generic boots fine). Also tested with 6.0.0 kernel - same problem. OpenBSD 6.6 and Tru64 boot fine on this machine and both use 2 processors. Boot logs from 5.18.0-2-alpha-smp and 5.18.0-2-alpha-generic are below for comparison: aboot: loading uncompressed vmlinuz... aboot: loading compressed vmlinuz... aboot: zero-filling 376684 bytes at 0xfc0002550e4c aboot: loading initrd (29170220 bytes/7121 blocks) at 0xfc00fe064000 aboot: starting kernel vmlinuz with arguments ro root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0 [0.00] Linux version 5.18.0-2-alpha-generic ( debian-ker...@lists.debian.org) (gcc-11 (Debian 11.3.0-3) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38.50.20220622) #1 Debian 5.18.5-1 (2022-06-16) [0.00] Booting GENERIC on Titan variation Granite using machine vector PRIVATEER from SRM [0.00] Major Options: MAGIC_SYSRQ [0.00] Command line: ro root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0 [0.00] memcluster 0, usage 1, start0, end 395 [0.00] memcluster 1, usage 0, start 395, end 524279 [0.00] memcluster 2, usage 1, start 524279, end 524288 [0.00] Initial ramdisk at: 0x(ptrval) (29170220 bytes) [0.00] 8192K Bcache detected; load hit latency 24 cycles, load miss latency 137 cycles [0.00] Zone ranges: [0.00] DMA [mem 0x-0x0fffdfff] [0.00] Normal empty [0.00] Movable zone start for each node [0.00] Early memory node ranges [0.00] node 0: [mem 0x-0x] [0.00] Initmem setup node 0 [mem 0x-0x] [0.00] Built 1 zonelists, mobility grouping on. Total pages: 520192 [0.00] Kernel command line: ro root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0 [0.00] Dentry cache hash table entries: 524288 (order: 9, 4194304 bytes, linear) [0.00] Inode-cache hash table entries: 262144 (order: 8, 2097152 bytes, linear) [0.00] Sorting __ex_table... [0.00] mem auto-init: stack:off, heap alloc:on, heap free:off [0.00] Memory: 4097288K/4194304K available (9074K kernel code, 9491K rwdata, 2768K rodata, 424K init, 367K bss, 97016K reserved, 0K cma-reserved) [0.00] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [0.00] NR_IRQS: 32784 [0.00] Turning on RTC interrupts. [0.000976] Console: colour dummy device 80x25 [0.027343] printk: console [ttyS0] enabled [0.028320] Calibrating delay loop... 1987.32 BogoMIPS (lpj=969728) [0.036132] pid_max: default: 32768 minimum: 301 [0.037109] LSM: Security Framework initializing [0.038085] Yama: disabled by default; enable with sysctl kernel.yama.* [0.039062] AppArmor: AppArmor initialized [0.040039] TOMOYO Linux initialized [0.041992] Mount-cache hash table entries: 8192 (order: 3, 65536 bytes, linear) [0.042968] Mountpoint-cache hash table entries: 8192 (order: 3, 65536 bytes, linear) [0.046874] cblist_init_generic: Setting adjustable number of callback queues. [0.047851] cblist_init_generic: Setting shift to 0 and lim to 1. [0.048828] Performance events: Supported CPU type! [0.050781] devtmpfs: initialized [0.054687] clocksource: jiffies: mask: 0x max_cycles: 0x, max_idle_ns: 1866466235866741 ns [0.055664] futex hash table entries: 256 (order: -1, 6144 bytes, linear) [0.057617] NET: Registered PF_NETLINK/PF_ROUTE protocol family [0.058593] audit: initializing netlink subsys (disabled) [0.060546] thermal_sys: Registered thermal governor 'fair_share' [0.060546] thermal_sys: Registered thermal governor 'bang_bang' [0.061523] thermal_sys: Registered thermal governor 'step_wise' [0.062499] thermal_sys: Registered thermal governor 'user_space' [0.063476] EISA bus registered [0.065429] PCI host bridge to bus :00 [0.066406] pci_bus :00: root bus resource [io 0x-0x1ff] [0.067382] pci_bus :00: root bus resource [mem 0x-0x7fff] [0.068359] pci_bus :00: No busn resource found for root bus, will use [bus 00-ff] [0.069335] pci :00:07.0: [10b9:1533] type 00 class 0x060100 [0.070312] pci :00:08.0: [8086:1209] type 00 class 0x02 [0.071289] pci :00:08.0: reg 0x10: [mem 0x0102-0x01020fff] [0.072265] pci :00:08.0: reg 0x14: [io 0x1-0x1003f] [0.073242] pci :00:08.0: reg 0x18: [mem 0x0100-0x0101] [0.074218] pci :00:08.0: supports D1 D2 [0.075195] pci :00:08.0: PME# supported from D0 D1 D2 D3hot [0.076171] pci :00:0c.0: [0e11:a0f7] type 00 class 0x080400 [0.077148] pci :00:0c.0: reg 0x10: [mem 0x01021000-0x010210ff] [0.079101] pci :00:10.0: [10b9:5229] type 00 class 0x0101fa [0.080078] pci
Bug#1011777: Debian 11 alpha-smp kernel refuses to boot on Alphaserver DS25 (Package: kernel-package)
Package: kernel-package alpha-generic kernel boots and detects 2 CPUs (cpus detected : 2): == root@AlphaSMP:/mnt# uname -a Linux AlphaSMP 5.17.0-2-alpha-generic #1 Debian 5.17.6-1 (2022-05-11) alpha GNU/Linux root@AlphaSMP:/mnt# cat /proc/cpuinfo cpu : Alpha cpu model : EV68CB cpu variation : 7 cpu revision: 0 cpu serial number : JA24700473 system type : Titan system variation: Granite system revision : 0 system serial number: AY24703444 cycle frequency [Hz]: 10 timer frequency [Hz]: 1024.00 page size [bytes] : 8192 phys. address bits : 44 max. addr. space # : 255 BogoMIPS: 1987.32 kernel unaligned acc: 11194 (pc=fffc00391e68,va=fc0003b1c242) user unaligned acc : 0 (pc=0,va=0) platform string : AlphaServer DS25 cpus detected : 2 L1 Icache : 64K, 2-way, 64b line L1 Dcache : 64K, 2-way, 64b line L2 cache: 8192K, 1-way, 64b line L3 cache: n/a alpha-smp kernel refuses to boot: = aboot: loading uncompressed vmlinuz... aboot: loading compressed vmlinuz... aboot: zero-filling 475668 bytes at 0xfc00027fcbe4 aboot: loading initrd (28840064 bytes/7041 blocks) at 0xfc007e0a2000 aboot: starting kernel vmlinuz with arguments ro root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0 [0.00] Linux version 5.17.0-2-alpha-smp ( debian-ker...@lists.debian.org) (gcc-11 (Debian 11.3.0-1) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38) #1 SMP Debian 5.17.6-1 (2022-05-11) [0.00] Booting GENERIC on Titan variation Granite using machine vector PRIVATEER from SRM [0.00] Major Options: SMP MAGIC_SYSRQ [0.00] Command line: ro root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0 [0.00] memcluster 0, usage 1, start0, end 395 [0.00] memcluster 1, usage 0, start 395, end 262135 [0.00] memcluster 2, usage 1, start 262135, end 262144 [0.00] Initial ramdisk at: 0x(ptrval) (28840064 bytes) [0.00] 8192K Bcache detected; load hit latency 24 cycles, load miss latency 137 cycles [0.00] SMP: 2 CPUs probed -- cpu_present_mask = 3 [0.00] Zone ranges: [0.00] DMA [mem 0x-0x0fffdfff] [0.00] Normal empty [0.00] Movable zone start for each node [0.00] Early memory node ranges [0.00] node 0: [mem 0x-0x7fff] [0.00] Initmem setup node 0 [mem 0x-0x7fff] [0.00] percpu: Embedded 8 pages/cpu s24192 r8192 d33152 u65536 [0.00] Built 1 zonelists, mobility grouping on. Total pages: 260096 [0.00] Kernel command line: ro root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0 [0.00] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes, linear) [0.00] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes, linear) [0.00] Sorting __ex_table... [0.00] mem auto-init: stack:off, heap alloc:on, heap free:off [0.00] Memory: 2016984K/2097152K available (9786K kernel code, 11330K rwdata, 2904K rodata, 472K init, 464K bss, 80168K reserved, 0K cma-reserved) [0.00] random: get_random_u64 called from __kmem_cache_create+0x54/0x6b0 with crng_init=0 [0.00] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [0.00] rcu: Hierarchical RCU implementation. [0.00] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [0.00] Tracing variant of Tasks RCU enabled. [0.00] rcu: RCU calculated value of scheduler-enlistment delay is 102 jiffies. [0.00] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [0.00] NR_IRQS: 32784 [0.001953] Console: colour dummy device 80x25 [0.035156] printk: console [ttyS0] enabled [0.036132] Calibrating delay loop... 1987.32 BogoMIPS (lpj=969728) [0.043945] pid_max: default: 32768 minimum: 301 [0.044921] LSM: Security Framework initializing [0.045898] Yama: disabled by default; enable with sysctl kernel.yama.* [0.046874] AppArmor: AppArmor initialized [0.047851] TOMOYO Linux initialized [0.048828] Mount-cache hash table entries: 4096 (order: 2, 32768 bytes, linear) [0.049804] Mountpoint-cache hash table entries: 4096 (order: 2, 32768 bytes, linear) [0.052734] SMP starting up secondaries. [0.054687] cblist_init_generic: Setting adjustable number of callback queues. [0.055664] cblist_init_generic: Setting shift to 1 and lim to 1. [0.056640] Performance events: Supported CPU type! [0.057617] rcu: Hierarchical SRCU implementation. [0.059570] smp: Bringing up secondary CPUs ... [0.071289] smp: Brought up 1
Bug#931933: Booting jessie on the same C8000 works like a charm
Booting jessie on the same C8000 is a beauty, works like a song: Booting... 10f700e0 CC_BOOT_INIT_OTHR_PATH Boot IO Dependent Code (IODC) revision 2 100200e0 CC_BOOT_LOAD_IPL_OTHR_PATH 160012cb00e0 CC_MPS_SLAVE_WAKEUP_ALL 160012cd00e0 0001 CC_MPS_SLAVE_WAKEUP 080012ce00e0 00f0f0d07888 CC_MPS_SLAVE_WAKE_FUNC 160012d501e0 0100023a CC_MPS_SLAVE_AWAKE 097c00e0 91ff CC_BOOT_MONARCH_SLAVE_CHECK 080012d601e0 00f0f0d07888 CC_MPS_SLAVE_WAKE_ADDR 160012cf00e0 910e CC_MPS_CPU_WAITING 0300096301e0 0808 CC_BOOT_MEM_CPU_RENDEZVOUS 160012d301e0 01009000 CC_MPS_SLAVE_SLEEPING 080012d401e0 00f0f0d07e40 CC_MPS_SLAVE_SLEEP_ADDR 160012d000e0 9100 CC_MPS_CPU_WAIT_OVER HARD Booted. 109800e0 CC_BOOT_LAUNCH_IPL_OTHR 0100142900e0 fff0f0e09d80 CC_CPU_INTRIGUE_LDB 3400082100e0 0001 CC_BOOT_BOOT_COMPLETE palo ipl 1.95 root@mkhppa3 Thu Apr 17 20:15:17 UTC 2014 Skipping extended partition 5 - beyond reach of IPL Partition Start(MB) End(MB) Id Type 1 2 38 f0 Palo 2 39 276 83 ext2 3 277 47960 83 ext2 PALO(F0) partition contains: 0/vmlinux64 11930248(0) bytes @ 0x14 Information: No console specified on kernel command line. This is normal. PALO will choose the console currently used by firmware (serial). Command line for kernel: 'root=UUID=7389e709-a47d-4e36-b2c5-373e87dd6f89 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux' Selected kernel: /vmlinux from partition 2 Selected ramdisk: /initrd.img from partition 2 ELF64 executable Entry 0010 first 0010 n 2 Segment 0 load 0010 size 228648 mediaptr 0x1000 Segment 1 load 00138000 size 9425024 mediaptr 0x39000 Loading ramdisk 16564768 bytes @ 3f022000... Branching to kernel entry point 0x0010. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org [0.00] Initializing cgroup subsys cpuset [0.00] Initializing cgroup subsys cpu [0.00] Initializing cgroup subsys cpuacct [0.00] Linux version 3.16.0-4-parisc64-smp ( debian-ker...@lists.debian.org) (gcc version 4.8.4 (GCC) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03) [0.00] unwind_init: start = 0x40877d58, end = 0x408bdf28, entries = 17949 [0.00] FP[0] enabled: Rev 1 Model 20 [0.00] The 64-bit Kernel has started... [0.00] Default page size is 4KB. [0.00] bootconsole [ttyB0] enabled [0.00] Initialized PDC Console for debugging. [0.00] Determining PDC firmware type: 64 bit PAT. [0.00] model 88b0 0491 0002 5680c2cb53677fcd 10f0 0008 00b2 00b2 [0.00] vers 0302 [0.00] CPUID vers 20 rev 5 (0x0285) [0.00] capabilities 0x35 [0.00] model 9000/785/C8000 [0.00] parisc_cache_init: Only equivalent aliasing supported! [0.00] Memory Ranges: [0.00] 0) Start 0x End 0x3fff Size 1024 MB [0.00] 1) Start 0x0001 End 0x0002ffdf Size 8190 MB [0.00] 2) Start 0x00404000 End 0x0040 Size 3072 MB [0.00] Total Memory: 12286 MB [0.00] initrd: 7f022000-7ffee220 [0.00] initrd: reserving 3f022000-3ffee220 (mem_max 2ffe0) [0.00] PERCPU: Embedded 14 pages/cpu @42fc s27072 r8192 d22080 u57344 [0.00] SMP: bootstrap CPU ID is 0 [0.00] Built 3 zonelists in Zone order, mobility grouping on. Total pages: 3102215 [0.00] Kernel command line: root=UUID=7389e709-a47d-4e36-b2c5-373e87dd6f89 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux [0.00] PID hash table entries: 4096 (order: 3, 32768 bytes) [0.00] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [0.00] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [0.00] Sorting __ex_table... [0.00] Memory: 12333216K/12580864K available (5512K kernel code, 1817K rwdata, 1091K rodata, 368K init, 636K bss, 247648K reserved) [0.00] virtual kernel memory layout: 0.00] vmalloc : 0x8000 - 0x3f00 (1007 MB) 0.00] memory : 0x4000 - 0x00414000 (266240 MB) 0.00] .init : 0x4010 - 0x4015c000 ( 368 kB) 0.00] .data : 0x406be000 - 0x40995470 (2909 kB) 0.00] .text : 0x4015c000 - 0x406be000 (5512 kB) [0.00] Hierarchical RCU implementation. [0.00] CONFIG_RCU_FANOUT set to non-default value of 32 [0.00] NR_IRQS:128 [0.00] Console: colour dummy device
Bug#931933: Debian 10.0 sid hppa refuses to boot on HP C8000:
Package: kernel-package
Debian 10.0 sid hppa refuses to boot on HP C8000:
palo ipl 2.00 http://www.parisc-linux.org - Mon, 01 Jan 2018 21:07:58 +0100
Boot image contains:
0/vmlinux32 3051144(0) bytes @ 0xf9c800
0/vmlinux64 4083216(0) bytes @ 0x1285800
0/ramdisk 15425064 bytes @ 0xdb800
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: ' console=ttyS0 TERM=vt102 palo_kernel=0/vmlinuz'
Selected kernel: /vmlinuz from partition 0
Selected ramdisk: /ramdisk from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing
64-bit kernel
ELF64 executable
Entry 000e first 000e n 2
Segment 0 load 000e size 1240 mediaptr 0x1000
Segment 1 load 0140 size 4069188 mediaptr 0x2000
Loading ramdisk 15425064 bytes @ 3f139000...
Branching to kernel entry point 0x000e. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Uncompressing ...
Booting kernel ...
[0.00] Linux version 4.19.0-5-parisc64-smp (
debian-ker...@lists.debian.org) (gcc version 8.3.0 (GCC)) #1 SMP Debian
4.19.37-5 (2019-06-19)
[0.00] CPU0: thread -1, cpu 0, socket 0
[0.00] FP[0] enabled: Rev 1 Model 20
[0.00] The 64-bit Kernel has started...
[0.00] Kernel default page size is 4 KB. Huge pages enabled with 1
MB physical and 2 MB virtual size.
[0.00] bootconsole [ttyB0] enabled
[0.00] Initialized PDC Console for debugging.
[0.00] Determining PDC firmware type: 64 bit PAT.
[0.00] PAT: Running on cell 0 and location 1.
[0.00] model 88b0 0491 0002 5680c2cb53677fcd
10f0 0008 00b2 00b2
[0.00] vers 0302
[0.00] CPUID vers 20 rev 5 (0x0285)
[0.00] capabilities 0x35
[0.00] model 9000/785/C8000
[0.00] parisc_cache_init: Only equivalent aliasing supported!
[0.00] Memory Ranges:
[0.00] 0) Start 0x End 0x3fff Size
1024 MB
[0.00] 1) Start 0x0001 End 0x0002ffdf Size
8190 MB
[0.00] 2) Start 0x00404000 End 0x0040 Size
3072 MB
[0.00] Total Memory: 12286 MB
[0.00] initrd: 7f139000-7ffeee28
[0.00] initrd: reserving 3f139000-3ffeee28 (mem_max 2ffe0)
[0.00] PDT: type PDT_PAT_NEW, size 3000, entries 1, status 0,
dbe_loc 0x1c8a8ad00, good_mem 0 MB
[0.00] PDT: Firmware reports 1 entries of faulty memory:
[0.00] PDT: BAD MEMORY at 0x1c8a8ad00, DIMM slot 2a, permanent
multi-bit error.
[0.00] percpu: Embedded 27 pages/cpu s72576 r8192 d29824 u110592
[0.00] SMP: bootstrap CPU ID is 0
[0.00] Built 3 zonelists, mobility grouping on. Total pages:
3096072
[0.00] Kernel command line: console=ttyS0 TERM=vt102
palo_kernel=0/vmlinuz
[0.00] Dentry cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[0.00] Inode-cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[0.00] Memory: 12299672K/12580864K available (11244K kernel code,
4460K rwdata, 1475K rodata, 1024K init, 816K bss, 281192K reserved, 0K
cma-reserved)
[0.00] random: get_random_u64 called from
__kmem_cache_create+0xd4/0xac8 with crng_init=0
[0.00] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=8, Nodes=8
[0.00] rcu: Hierarchical RCU implementation.
[0.00] NR_IRQS: 128
[0.10] sched_clock: 64 bits at 1000MHz, resolution 1ns, wraps every
4398046511103ns
[0.107172] Console: colour dummy device 160x64
[0.167145] Calibrating delay loop... 1988.60 BogoMIPS (lpj=3977216)
[0.283152] pid_max: default: 32768 minimum: 301
[0.347535] Security Framework initialized
[0.399167] Yama: disabled by default; enable with sysctl kernel.yama.*
[0.487328] AppArmor: AppArmor initialized
[0.543613] Mount-cache hash table entries: 32768 (order: 6, 262144
bytes)
[0.635198] Mountpoint-cache hash table entries: 32768 (order: 6, 262144
bytes)
[0.734588] rcu: Hierarchical SRCU implementation.
[0.800331] smp: Bringing up secondary CPUs ...
[0.859164] smp: Brought up 3 nodes, 1 CPU
[0.919323] devtmpfs: initialized
[0.965657] clocksource: jiffies: mask: 0x max_cycles:
0x, max_idle_ns: 764504178510 ns
[1.091214] futex hash table entries: 2048 (order: 4, 65536 bytes)
[1.187584] NET: Registered protocol family 16
[1.247402] audit: initializing netlink subsys (disabled)
[1.319316] audit: type=2000 audit(1562938915.316:1): state=initialized
audit_enabled=0 res=1
[1.431962] EISA bus registered
[1.471262] Searching for devices...
[1.627160] Found devices:
[1.659169] 1. Crestone Peak Fast? at 0xfe78 [128] { 0, 0x0,
0x88b, 0x4 }
[1.767166] 2. Crestone
