Bug#983495: linux-image-amd64: Please enable ee1004 module

[Arjan Opmeer]

Package: linux-image-amd64
Version: 5.10.13-1
Severity: wishlist
X-Debbugs-Cc: ar...@opmeer.net

Dear Maintainer,

Could you please enable the 'ee1004' module setting in the default kernel
build?

Justification:

Debian ships the 'i2c-tools' package which contains the 'decode-dimms' user
program. Its manpage states:

   the tool requires a kernel module to be loaded: eeprom, at24
   or ee1004 (for DDR4 SDRAM.)

Running it with the 'eeprom' module loaded gives this result:

   WARNING: /sys/bus/i2c/drivers/eeprom/0-0052/eeprom is smaller than expected
   WARNING: Fewer data bytes available (256) than needed (384)
   HINT: You should be using the ee1004 driver instead of the eeprom driver

However:

   $ grep -A 1 -B 9 -i ee1004 /boot/config-5.10.0-3-amd64 

   # EEPROM support
   #
   CONFIG_EEPROM_AT24=m
   CONFIG_EEPROM_AT25=m
   CONFIG_EEPROM_LEGACY=m
   CONFIG_EEPROM_MAX6875=m
   CONFIG_EEPROM_93CX6=m
   # CONFIG_EEPROM_93XX46 is not set
   # CONFIG_EEPROM_IDT_89HPESX is not set
   # CONFIG_EEPROM_EE1004 is not set
   # end of EEPROM support

As you can see the CONFIG_EEPROM_EE1004 option is not set. Could this be
included in future kernel builds?

Thanks,

Arjan

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 5.10.0-3-amd64 (SMP w/8 CPU threads)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-amd64 depends on:
ii  linux-image-5.10.0-3-amd64  5.10.13-1

linux-image-amd64 recommends no packages.

linux-image-amd64 suggests no packages.

-- no debconf information

Bug#924689: linux-image-4.19.0-4-amd64: Many instances of "PKCS#7 signature not signed with a trusted key" printed while booting

[Arjan Opmeer]

Package: src:linux
Version: 4.19.28-1
Severity: normal

Dear Maintainer,

After upgrading from linux-image-4.19.0-3-amd64 to linux-image-4.19.0-4-amd64
booting the kernel now prints a whole host of these messages:

   PKCS#7 signature not signed with a trusted key

ultimately slowing down the entire booting proces. This problem does not
occur when booting the previous 4.19.0-3 kernel.

I noticed this difference in kernel configuration:

   diff -u config-4.19.0-3-amd64 config-4.19.0-4-amd64

   @@ -8252,7 +8252,7 @@
#
CONFIG_MODULE_SIG_KEY=""
CONFIG_SYSTEM_TRUSTED_KEYRING=y
   -CONFIG_SYSTEM_TRUSTED_KEYS="debian/certs/test-signing-certs.pem"
   +CONFIG_SYSTEM_TRUSTED_KEYS="debian/certs/debian-uefi-ca.pem"

Could it be that this new "debian-uefi-ca.pem" is indeed not trusted and the
source of this problem?


Thanks,

Arjan


-- Package-specific info:
** Version:
Linux version 4.19.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 
8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-1 (2019-03-12)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-4-amd64 
root=UUID=5e2c758e-8075-4033-be8d-07693c5cc6f0 ro acpi_backlight=vendor quiet

** Tainted: E (8192)
 * Unsigned module has been loaded.

** Kernel log:
[   23.425002] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   23.425003] [TTM] Initializing pool allocator
[   23.425016] [TTM] Initializing DMA pool allocator
[   23.425060] [drm] radeon: 512M of VRAM memory ready
[   23.425062] [drm] radeon: 1024M of GTT memory ready.
[   23.425095] [drm] Loading CEDAR Microcode
[   23.451043] PKCS#7 signature not signed with a trusted key
[   23.471056] PKCS#7 signature not signed with a trusted key
[   23.564778] ath: phy0: ASPM enabled: 0x42
[   23.564785] ath: EEPROM regdomain: 0x65
[   23.564786] ath: EEPROM indicates we should expect a direct regpair map
[   23.564791] ath: Country alpha2 being used: 00
[   23.564792] ath: Regpair used: 0x65
[   23.676657] PKCS#7 signature not signed with a trusted key
[   23.684798] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   23.685510] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb260013d, 
irq=17
[   24.186675] radeon :02:00.0: firmware: direct-loading firmware 
radeon/CEDAR_pfp.bin
[   24.486637] radeon :02:00.0: firmware: direct-loading firmware 
radeon/CEDAR_me.bin
[   24.853546] radeon :02:00.0: firmware: direct-loading firmware 
radeon/CEDAR_rlc.bin
[   24.911318] radeon :02:00.0: firmware: direct-loading firmware 
radeon/CEDAR_smc.bin
[   24.911337] [drm] Internal thermal controller with fan control
[   24.945520] [drm] radeon: dpm initialized
[   25.050646] radeon :02:00.0: firmware: direct-loading firmware 
radeon/CYPRESS_uvd.bin
[   25.050740] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   25.053824] [drm] enabling PCIE gen 2 link speeds, disable with 
radeon.pcie_gen2=0
[   25.069221] [drm] PCIE GART of 1024M enabled (table at 0x0014C000).
[   25.069342] radeon :02:00.0: WB enabled
[   25.069350] radeon :02:00.0: fence driver on ring 0 use gpu addr 
0x2c00 and cpu addr 0xccc78879
[   25.069355] radeon :02:00.0: fence driver on ring 3 use gpu addr 
0x2c0c and cpu addr 0x96aee0c2
[   25.069740] radeon :02:00.0: fence driver on ring 5 use gpu addr 
0x0005c418 and cpu addr 0xa1f960b6
[   25.069745] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   25.069747] [drm] Driver supports precise vblank timestamp query.
[   25.069750] radeon :02:00.0: radeon: MSI limited to 32-bit
[   25.069840] radeon :02:00.0: radeon: using MSI.
[   25.069883] [drm] radeon: irq initialized.
[   25.086445] [drm] ring test on 0 succeeded in 0 usecs
[   25.086453] [drm] ring test on 3 succeeded in 2 usecs
[   25.273442] [drm] ring test on 5 succeeded in 1 usecs
[   25.273448] [drm] UVD initialized successfully.
[   25.273763] [drm] ib test on ring 0 succeeded in 0 usecs
[   25.273806] [drm] ib test on ring 3 succeeded in 0 usecs
[   25.444809] [drm] ib test on ring 5 succeeded
[   25.506328] [drm] radeon atom DIG backlight initialized
[   25.506335] [drm] Radeon Display Connectors
[   25.506339] [drm] Connector 0:
[   25.506341] [drm]   LVDS-1
[   25.506345] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 
0x656c
[   25.506346] [drm]   Encoders:
[   25.506348] [drm] LCD1: INTERNAL_UNIPHY
[   25.506350] [drm] Connector 1:
[   25.506352] [drm]   HDMI-A-1
[   25.506354] [drm]   HPD1
[   25.506358] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 
0x644c
[   25.506359] [drm]   Encoders:
[   25.506361] [drm] DFP1: INTERNAL_UNIPHY1
[   25.506362] [drm] Connector 2:
[   25.506364] [drm]   VGA-1
[   25.506367] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 
0x643c
[   25.506368] [drm]   Encoders:
[   25.506370] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[   25.796742] PKCS#7 signature not signed with a trusted key
[   25.800172] 

Bug#902636: linssid: Newer versions of linssid are available

[Arjan Opmeer]

Package: linssid
Version: 2.9-4
Severity: wishlist
Tags: upstream

Dear Maintainer,

Please consider packaging a newer version of linssid.

In the last month there has been a flurry of activity in the development of
linssid. At the moment of writing we are up to version 3.6 already. This
version of linssid uses polkit (policykit) to obtain root privileges and
(partly) fixes the problems mentioned in bug #858191.


Thanks,

Arjan

-- System Information:
Debian Release: buster/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.16.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linssid depends on:
ii  iw4.14-0.1
ii  libboost-regex1.62.0  1.62.0+dfsg-5.1
ii  libc6 2.27-3
ii  libgcc1   1:8.1.0-9
ii  libqt5core5a  5.10.1+dfsg-7
ii  libqt5gui55.10.1+dfsg-7
ii  libqt5widgets55.10.1+dfsg-7
ii  libqwt-qt5-6  6.1.3-1
ii  libstdc++68.1.0-9
ii  wireless-tools30~pre9-12+b1

linssid recommends no packages.

linssid suggests no packages.

-- no debconf information

Bug#864830: mysql-server-5.7: Logrotate config is not quiet causing cron to send email

[Arjan Opmeer]

Package: mysql-server
Version: 5.7.18-1
Followup-For: Bug #864830

It seems that this may be fixed by the latest release of psmisc that removes
this ouput from killall. See bug #864753.

Thanks,

Arjan


-- System Information:
Debian Release: 9.0
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)

Versions of packages mysql-server depends on:
ii  mysql-server-5.7  5.7.18-1

mysql-server recommends no packages.

mysql-server suggests no packages.

-- no debconf information

Bug#864830: mysql-server-5.7: Logrotate config is not quiet causing cron to send email

[Arjan Opmeer]

Package: mysql-server-5.7
Version: 5.7.18-1
Severity: normal

Dear Maintainer,

The logrotate config of mysql-server contains this test:

   if killall -q -s0 -umysql mysqld; then

However killall unconditionally emits the output "sending signal 0 to
procs". See this source line:

   975   printf("sending signal %d to procs\n", sig_num);

Because lograte is started from the cron.daily cronjob this extra output
causes cron to send email to root.

I believe this issue can be easily fixed by redirecting output to /dev/null
like so:

   if killall -q -s0 -umysql mysqld >/dev/null; then


Thanks,

Arjan



-- System Information:
Debian Release: 9.0
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.9.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)

Versions of packages mysql-server-5.7 depends on:
ii  adduser3.115
ii  bsdutils   1:2.29.2-1
ii  debconf [debconf-2.0]  1.5.61
ii  init-system-helpers1.48
ii  libatomic1 6.3.0-18
ii  libc6  2.24-11
ii  libevent-core-2.0-52.0.21-stable-3
ii  libgcc11:6.3.0-18
ii  liblz4-1   0.0~r131-2+b1
ii  libmecab2  0.996-3.1
ii  libstdc++6 7.1.0-5
ii  lsb-base   9.20161125
ii  mysql-client-5.7   5.7.18-1
ii  mysql-common   5.8+1.0.2
ii  mysql-server-core-5.7  5.7.18-1
ii  passwd 1:4.4-4.1
ii  perl   5.24.1-3
ii  psmisc 23.0-1
ii  zlib1g 1:1.2.8.dfsg-5

Versions of packages mysql-server-5.7 recommends:
ii  libhtml-template-perl  2.95-2

Versions of packages mysql-server-5.7 suggests:
ii  bsd-mailx [mailx]  8.1.2-0.20160123cvs-4
pn  tinyca 

-- debconf information:
  mysql-server/no_upgrade_when_using_ndb:
  mysql-server-5.7/nis_warning:
  mysql-server/password_mismatch:
  mysql-server-5.7/really_downgrade: false
  mysql-server-5.7/postrm_remove_databases: false
  mysql-server-5.7/start_on_boot: true

Bug#781987: Regarding bug #781987 - dwww: All links are broken after clean install

[Arjan Opmeer]

I ran into the same problem and started investigating.

On Fri, 6 Jan 2017 22:44:49 +0100 Jerome  wrote:
> 
> [Fri Jan 06 21:34:53.830541 2017] [http:error] [pid 6785:tid 
> 140419151554304] [client ::1:45220] AH02429: Response header name 'Last 
> modified' contains invalid characters, aborting request, referer: 
> http://localhost/dwww/
> 
> This generated what looks like proper output, the header is:
>   Content-type: text/html
>   Last modified: Tue Dec 13 14:16:35 2016
>   Content-Disposition: inline; filename="index.html"
> 
> The 'Last modified' looks ok to me...

Actually the header should read "Last-Modified" (note spelling). After
patching the dwww script to emit the correct header the error no longer
occurs with Apache.

This incorrect header is output by the script /usr/sbin/dwww-convert. I made
the following change to it:

--- dwww-convert.OLD2017-01-12 06:24:58.208140587 +0100
+++ dwww-convert2017-01-12 06:25:13.900487551 +0100
@@ -327,7 +327,7 @@
 print "Content-type: $mime_type" . (defined $mime_charset ? "; 
charset=$mime_charset\n" : "\n");
 my @stat = stat( $filename );
 my $mtime = $stat[9];
-print "Last modified: " . gmtime($mtime) . "\n";
+print "Last-Modified: " . gmtime($mtime) . "\n";
 print "Content-Disposition: inline; filename=\"$base_name\"\n";
 print "\n";
 } # }}}

Although the date string is technically in an obsolete format, conforming
clients (like Apache) are required to be able to parse it. So this poses no
further problem.


Arjan

Bug#850885: apache2: Using dwww, fails with internal server error when trying to access /usr/share/doc

[Arjan Opmeer]

I ran into the same problem and started investigating.

On Tue, 10 Jan 2017 22:01:45 +0100 Jerome  wrote:
> 
> When looking at the Apache log, the following entry can be found:
> 
> [Fri Jan 06 21:34:53.830541 2017] [http:error] [pid 6785:tid
> 140419151554304] [client ::1:45220] AH02429: Response header name
> 'Last modified' contains invalid characters, aborting request,
> referer: http://localhost/dwww/
> 
> When calling the dwww CGI script manually, the 'Last modified' field
> is correct however, here's the HTTP header part:
> 
> Content-type: text/html
> Last modified: Tue Dec 13 14:16:35 2016
> Content-Disposition: inline; filename="index.html"

Actually the header should read "Last-Modified" (note spelling). After
patching the dwww script to emit the correct header the error no longer
occurs with Apache. Therefore I believe the bug should be reassigned to
dwww.

I will reply to the corresponding dwww bug report (#781987) with the fix I
applied to the dwww script.


Arjan

Bug#631118: samba: smbd spams log with Could not find child X -- ignoring messages

[Arjan Opmeer]

Package: samba
Version: 2:3.5.9~dfsg-1
Severity: normal

Since the update to 2:3.5.9~dfsg-1 smbd now spams the log with messages
like:

  smbd/server.c:281(remove_child_pid) 
Could not find child X -- ignoring

This is a known problem which upstream has worked around by altering the log
level for these messages:

  
http://gitweb.samba.org/?p=samba.git;a=commit;h=9c12232f1ae36e00d04114ad73edd8ba3c2c6a5c

Could you please apply the upstream patch to the Debian built version?
Thanks!


Arjan


-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.38.3
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages samba depends on:
ii  adduser 3.113add and remove users and groups
ii  debconf [debconf-2.0]   1.5.39   Debian configuration management sy
ii  libacl1 2.2.49-5 Access control list shared library
ii  libattr11:2.4.44-3   Extended attribute shared library
ii  libc6   2.13-7   Embedded GNU C Library: Shared lib
ii  libcap2 1:2.21-1 support for getting/setting POSIX.
ii  libcomerr2  1.41.12-4common error description library
ii  libcups21.4.6-9  Common UNIX Printing System(tm) - 
ii  libgssapi-krb5-21.9.1+dfsg-1 MIT Kerberos runtime libraries - k
ii  libk5crypto31.9.1+dfsg-1 MIT Kerberos runtime libraries - C
ii  libkrb5-3   1.9.1+dfsg-1 MIT Kerberos runtime libraries
ii  libldap-2.4-2   2.4.25-1.1   OpenLDAP libraries
ii  libpam-modules  1.1.3-1  Pluggable Authentication Modules f
ii  libpam-runtime  1.1.3-1  Runtime support for the PAM librar
ii  libpam0g1.1.3-1  Pluggable Authentication Modules l
ii  libpopt01.16-1   lib for parsing cmdline parameters
ii  libtalloc2  2.0.5-1  hierarchical pool based memory all
ii  libtdb1 1.2.9-1  Trivial Database - shared library
ii  libwbclient02:3.5.9~dfsg-1   Samba winbind client library
ii  lsb-base3.2-27   Linux Standard Base 3.2 init scrip
ii  procps  1:3.2.8-10   /proc file system utilities
ii  samba-common2:3.5.9~dfsg-1   common files used by both the Samb
ii  update-inetd4.38+nmu1inetd configuration file updater
ii  zlib1g  1:1.2.3.4.dfsg-3 compression library - runtime

Versions of packages samba recommends:
ii  logrotate 3.7.8-6Log rotation utility
pn  tdb-tools none (no description available)

Versions of packages samba suggests:
pn  ctdb  none (no description available)
pn  ldb-tools none (no description available)
pn  smbldap-tools none (no description available)
ii  xinetd [inet-superserver] 1:2.3.14-7 replacement for inetd with many en

-- debconf information excluded



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#631118: [Pkg-samba-maint] Bug#631118: samba: smbd spams log with Could not find child X -- ignoring messages

[Arjan Opmeer]

On Tue, Jun 21, 2011 at 05:46, Christian PERRIER bubu...@debian.org wrote:
 Quoting Arjan Opmeer (arjan.opm...@gmail.com):
 Package: samba
 Version: 2:3.5.9~dfsg-1
 Severity: normal

 Since the update to 2:3.5.9~dfsg-1 smbd now spams the log with messages
 like:

   smbd/server.c:281(remove_child_pid)
     Could not find child X -- ignoring

 This is a known problem which upstream has worked around by altering the log
 level for these messages:

   
 http://gitweb.samba.org/?p=samba.git;a=commit;h=9c12232f1ae36e00d04114ad73edd8ba3c2c6a5c

 Could you please apply the upstream patch to the Debian built version?
 Thanks!

 Hello, thanks for reporting this issue.

 I see the upstream fix, but do you have a reference to any upstream
 bug report?

Uhm, no. Sorry.

 I'd prefer reading a full bug report log before applying an upstream
 change, to decide how hard it is needed.

I arrived at that upstream patch via a Google search.
Found this Suse bugzilla entry:

   https://bugzilla.novell.com/show_bug.cgi?id=666460

and this Samba list discussion:

  http://lists.samba.org/archive/samba-technical/2011-February/076396.html

Also note the few next messages in the same thread.


Arjan



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#613107: epiphany-browser: Add http and https schemes to supported mimetypes in epiphany.desktop file

[Arjan Opmeer]

Package: epiphany-browser
Version: 2.30.6-1
Severity: wishlist

Modern Gnome desktops look at the scheme of a URL (i.e the http:// part)   
first to determine with which application to open it. When one has multiple
browsers installed and only one of them supports said scheme it will always
be used to open the URL. This happens when one ctrl-clicks on a URL in 
gnome-terminal or uses a utility like gvfs-open (or even xdg-open which uses
gvfs-open under water).

In my case I have iceweasel, epiphany and chromium installed. Only chromium
currently indicates in its desktop files that it knows how to handle http
schemes. And although I have made iceweasel my default browser when I
ctrl-click on a URL in gnome-terminal it will always be opened with
chromium.

However, as soon as I added the schemes to the iceweasel.desktop file and
ran update-desktop-database to regenerate the mimeinfo.cache file this
changed. Now when I ctrl-click on a URL in gnome-terminal both chromium and
iceweasel will be considered for opening the URL and somewhere deep in the
bowels of Gnome it is discovered that I have made iceweasel my default
browser and hence it opens the URL in iceweasel instead of chromium. In
short exactly the behaviour I want... :)

To have epiphany considered on even footing with chromium (and hopfully soon
iceweasel) it should also add the http and https schemes to its desktop
file. Like so:

--- epiphany.desktop.ORIG   2011-02-12 21:09:08.0 +0100
+++ epiphany.desktop2011-02-12 21:11:00.0 +0100
@@ -336,4 +336,4 @@ X-GNOME-Bugzilla-Product=epiphany
 X-GNOME-Bugzilla-Component=BugBuddyBugs
 X-GNOME-Bugzilla-Version=2.30.6
 Categories=Network;GNOME;GTK;WebBrowser;
-MimeType=text/html;text/xml;application/xhtml+xml;
+MimeType=text/html;text/xml;application/xhtml+xml;x-scheme-handler/http;x-scheme-handler/https;

Could you please add these changes to the epiphany.desktop file?

(I have sent a similar bugreport to the iceweasel maintainers)

Arjan


-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.37
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages epiphany-browser depends on:
ii  dbus-x11   1.4.1-2   simple interprocess messaging syst
ii  epiphany-browser-data  2.30.6-1  Data files for the GNOME web brows
ii  gnome-icon-theme   2.30.3-2  GNOME Desktop icon theme
ii  iso-codes  3.24.1-1  ISO language, territory, currency,
ii  libavahi-client3   0.6.28-3  Avahi client library
ii  libavahi-common3   0.6.28-3  Avahi common library
ii  libavahi-gobject0  0.6.28-3  Avahi GObject library
ii  libc6  2.11.2-11 Embedded GNU C Library: Shared lib
ii  libcairo2  1.10.2-2  The Cairo 2D vector graphics libra
ii  libdbus-1-31.4.1-2   simple interprocess messaging syst
ii  libdbus-glib-1-2   0.88-2.1  simple interprocess messaging syst
ii  libgconf2-42.28.1-6  GNOME configuration database syste
ii  libgirepository1.0-0   0.6.14-1+b1   Library for handling GObject intro
ii  libglib2.0-0   2.28.0-1  The GLib library of C routines
ii  libgnome-keyring0  2.30.1-1  GNOME keyring services library
ii  libgtk2.0-02.20.1-2  The GTK+ graphical user interface 
ii  libice62:1.0.7-1 X11 Inter-Client Exchange library
ii  libnotify1 [libnotify1 0.5.0-2   sends desktop notifications to a n
ii  libnspr4-0d4.8.6-1   NetScape Portable Runtime Library
ii  libnss3-1d 3.12.8-2  Network Security Service libraries
ii  libpango1.0-0  1.28.3-1+squeeze1 Layout and rendering of internatio
ii  libseed0   2.30.0-1+b1   GObject JavaScript bindings for th
ii  libsm6 2:1.2.0-1 X11 Session Management library
ii  libsoup-gnome2.4-1 2.30.2-1  an HTTP library implementation in 
ii  libsoup2.4-1   2.30.2-1  an HTTP library implementation in 
ii  libwebkit-1.0-21.2.6-2   Web content engine library for Gtk
ii  libx11-6   2:1.4.1-4 X11 client-side library
ii  libxml22.7.8.dfsg-2  GNOME XML library
ii  libxslt1.1 1.1.26-6  XSLT 1.0 processing library - runt

Versions of packages epiphany-browser recommends:
ii  ca-certificates  20090814+nmu2   Common CA certificates
ii  evince   2.30.3-2Document (PostScript, PDF) viewer
ii  yelp 2.30.1+webkit-1 Help browser for GNOME

Versions of packages epiphany-browser suggests:
pn  epiphany-extensions   none (no description available)

epiphany-webkit depends on no packages.

-- no debconf information

Bug#613109: Add http and https schemes to supported mimetypes in iceweasel.desktop file

[Arjan Opmeer]

Package: iceweasel
Version: 3.6.13-2
Severity: wishlist

Modern Gnome desktops look at the scheme of a URL (i.e the http:// part)
first to determine with which application to open it. When one has multiple
browsers installed and only one of them supports said scheme it will always
be used to open the URL. This happens when one ctrl-clicks on a URL in
gnome-terminal or uses a utility like gvfs-open (or even xdg-open which uses
gvfs-open under water).

In my case I have iceweasel, epiphany and chromium installed. Only chromium
currently indicates in its desktop files that it knows how to handle http
schemes. And although I have made iceweasel my default browser when I
ctrl-click on a URL in gnome-terminal it will always be opened with
chromium.

However, as soon as I added the schemes to the iceweasel.desktop file and
ran update-desktop-database to regenerate the mimeinfo.cache file this
changed. Now when I ctrl-click on a URL in gnome-terminal both chromium and
iceweasel will be considered for opening the URL and somewhere deep in the
bowels of Gnome it is discovered that I have made iceweasel my default
browser and hence it opens the URL in iceweasel instead of chromium. In
short exactly the behaviour I want... :)

To accomplish this I made the following changes:

--- iceweasel.desktop.ORIG  2011-02-12 21:09:14.0 +0100
+++ iceweasel.desktop   2011-02-12 21:11:00.0 +0100
@@ -99,6 +99,6 @@ X-MultipleArgs=false
 Type=Application
 Icon=iceweasel
 Categories=Network;WebBrowser;
-MimeType=text/html;text/xml;application/xhtml+xml;application/xml;application/vnd.mozilla.xul+xml;application/rss+xml;application/rdf+xml;image/gif;image/jpeg;image/png;
+MimeType=text/html;text/xml;application/xhtml+xml;application/xml;application/vnd.mozilla.xul+xml;application/rss+xml;application/rdf+xml;image/gif;image/jpeg;image/png;x-scheme-handler/http;x-scheme-handler/https;
 StartupWMClass=Firefox-bin
 StartupNotify=true

Could you please add these changes to the iceweasel.desktop file to have it
considered on even footing with chromium?

(I have sent a similar bugreport the the epiphany maintainers)

Arjan


-- Package-specific info:

-- Extensions information
Name: Adblock Plus
Location: ${PROFILE_EXTENSIONS}/{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Status: enabled

Name: AniDisable
Location: ${PROFILE_EXTENSIONS}/{0F06271E-61EF-46b8-ACC2-99BAD4BB9F89}
Status: enabled

Name: CookieCuller
Location: ${PROFILE_EXTENSIONS}/{99B98C2C-7274-45a3-A640-D9DF1A1C8460}
Status: enabled

Name: Default
Location: /usr/lib/iceweasel/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}
Package: iceweasel
Status: enabled

Name: Flashblock
Location: ${PROFILE_EXTENSIONS}/{3d7eb24f-2740-49df-8937-200b1cc08f8a}
Status: enabled

Name: Nuke Anything Enhanced
Location: ${PROFILE_EXTENSIONS}/{1ced4832-f06e-413f-aa14-9eb63ad40ace}
Status: enabled

Name: QuickJava
Location: ${PROFILE_EXTENSIONS}/{E6C1199F-E687-42da-8C24-E7770CC3AE66}
Status: enabled

Name: User Agent Switcher
Location: ${PROFILE_EXTENSIONS}/{e968fc70-8f95-4ab9-9e79-304de2a71ee1}
Status: enabled

-- Plugins information
Name: DivX® Web Player
Location: /usr/lib/mozilla/plugins/libtotem-mully-plugin.so
Package: totem-mozilla
Status: enabled

Name: IcedTea NPR Web Browser Plugin (using IcedTea6 1.8.5 (6b18-1.8.5-1))
Location: /usr/lib/jvm/java-6-openjdk/jre/lib/i386/IcedTeaPlugin.so
Package: icedtea6-plugin
Status: disabled

Name: QuickTime Plug-in 7.6.6
Location: /usr/lib/mozilla/plugins/libtotem-narrowspace-plugin.so
Package: totem-mozilla
Status: enabled

Name: Shockwave Flash
Location: /usr/lib/flashplayer-mozilla/libflashplayer.so
Package: flashplayer-mozilla
Status: enabled

Name: VLC Multimedia Plugin (compatible Totem 2.30.2)
Location: /usr/lib/mozilla/plugins/libtotem-cone-plugin.so
Package: totem-mozilla
Status: enabled

Name: Windows Media Player Plug-in 10 (compatible; Totem)
Location: /usr/lib/mozilla/plugins/libtotem-gmp-plugin.so
Package: totem-mozilla
Status: enabled


-- Addons package information
ii  flashplayer-mo 2:10.1.102.64- Macromedia Flash Player
ii  icedtea6-plugi 6b18-1.8.5-1   web browser plugin based on OpenJDK and Iced
ii  iceweasel  3.6.13-2   Web browser based on Firefox
ii  totem-mozilla  2.30.2-6   Totem Mozilla plugin

-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.37
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages iceweasel depends on:
ii  debianutils   3.4.3  Miscellaneous utilities specific t
ii  fontconfig2.8.0-2.1  generic font configuration library
ii  libc6 2.11.2-11  Embedded GNU C Library: Shared lib
ii  libgcc1   1:4.4.5-10 GCC support library
ii  libglib2.0-0  2.28.0-1   The GLib library of C routines
ii  libgtk2.0-0  

Bug#568560: fuzzyocr: FuzzyOcr incompatible with current version of perl?

[Arjan Opmeer]

On Sat, Feb 06, 2010 at 09:17:10AM +1300, Francois Marier wrote:

 It appears that FuzzyOcr no longer runs on my sid box. I get a lot of these 
 in my logs:
 
   spamd[23016]: FuzzyOcr: Error running preprocessor(ppmtopgm): 
 /usr/bin/ppmtopgm
   spamd[23016]: FuzzyOcr: Return code: 2048, Error: save_execute: Insecure 
 dependency in exec while running setuid at /usr/share/perl5/FuzzyOcr/Misc.pm 
 line 188.

   spamd[23016]: FuzzyOcr: Unable to read output from 
 /tmp/.spamassassin23016gw80E3tmp/scanset.tesseract.out.txt for scanset 
 tesseract
   spamd[23016]: FuzzyOcr: Errors in Scanset tesseract
   spamd[23016]: FuzzyOcr: Return code: 2048, Error: save_execute: Insecure 
 dependency in exec while running setuid at /usr/share/perl5/FuzzyOcr/Misc.pm 
 line 188.

The programs that have errors are most probably the ones you defined with a
focr_bin_helper line in the config file, right?

 Could it be that FuzzyOcr doesn't work with Perl 5.10?

No, the current version of SpamAssassin uses Perl's taint mode to mark
config data as possibly dangerous. The FuzzyOcr config file is read with the
SpamAssassin parser. This causes the names of the helper programs you
defined to be considered as tainted data. And when running in taint mode,
Perl will not execute external programs when it derives the name from a
tainted variable.

I hacked around this by explicitly untainting the data from focr_bin_helper
and focr_bin_progname config entries by using the included patch. At the
moment this is sufficient to have FuzzyOcr running without errors on my
system, but I might have missed some corner cases. The inluded patch should
probably also be reviewed for security implications.


Arjan


--- Config.pm.ORIG  2010-02-18 12:58:40.0 +0100
+++ Config.pm   2010-02-18 14:44:02.0 +0100
@@ -577,7 +577,7 @@ sub parse_config {
 return 1;
 } elsif ($opts-{key} eq 'focr_bin_helper') {
 my @cmd; $conf = $opts-{conf};
-my $val = $opts-{value}; $val =~ s/[\s]*//g;
+my $val = Mail::SpamAssassin::Util::untaint_var($opts-{value}); $val 
=~ s/[\s]*//g;
 debuglog(focr_bin_helper: '$val');
 foreach my $bin (split(',',$val)) {
 unless (grep {m/$bin/} @bin_utils) {
@@ -618,6 +618,7 @@ sub finish_parsing_end {
 delete $conf-{$b};
 } 
 if (defined $conf-{$b}) {
+$conf-{$b} = Mail::SpamAssassin::Util::untaint_var($conf-{$b});
 debuglog(Using $a = $conf-{$b});
 } else {
 foreach my $p (@paths) {




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#568233: fuzzyocr: Logfile option is not 'taint' safe causing far-reaching consequences (e.g. sa-compile will not run)

[Arjan Opmeer]

Package: fuzzyocr
Version: 3.5.1+svn135-1.2
Severity: normal
Tags: patch

FuzzyOcr allows logging to file with the focr_logfile option like so:

   focr_logfile /some/path/file

However, because nowadays spamassassin runs with Perl 'taint' mode enabled,
opening this file is not allowed:

   warn: plugin: eval failed: Insecure dependency in open while running with -T
 switch at /usr/share/perl5/FuzzyOcr/Logging.pm line 36.

Apparently also causing parsing errors:

   info: config: failed to parse line, skipping, in 
 /etc/spamassassin/FuzzyOcr.cf:
 focr_bin_helper pnmnorm, pnminvert, ppmtopgm

but ultimately causing the FuzzyOcr plugin not to run:

   warn: rules: failed to run FUZZY_OCR test, skipping:

Unfortunately this has far-reaching consequences because now sa-compile will
fail to run to completion:

   rules: failed to run FUZZY_OCR test, skipping:
  (Insecure dependency in open while running with -T switch at
   /usr/share/perl5/FuzzyOcr/Logging.pm line 36.)
   sa-compile: not compiling; 'spamassassin --lint' check failed!

which can also cause the spamassassin daily cron job to exit with an error.

The attached patch works around this problem by explicitly 'untainting' the
FuzzyOcr logfile. Now the FuzzyOcr plugin will work again and sa-compile
will run to its completion.

There might be a security impact with this change, so you might want to talk
to the spamassassin maintainers about this.


Arjan

-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.27.21 (PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages fuzzyocr depends on:
ii  giflib-tools  4.1.6-9library for GIF images (utilities)
ii  gifsicle  1.58-1 Tool for manipulating GIF images
ii  gocr  0.46-2.1   A command line OCR
ii  libdbd-mysql-perl 4.012-1+b1 A Perl5 database interface to the 
ii  libmldbm-sync-perl0.30-3 Perl module for safe concurrent ac
ii  libstring-approx-perl 3.26-1 Perl extension for approximate mat
ii  libtie-cache-perl 0.17-4 perl Tie::Cache - LRU Cache in Mem
ii  netpbm2:10.0-12  Graphics conversion tools
ii  ocrad 0.17-4 Optical Character Recognition prog
ii  perl [libdigest-md5-perl] 5.10.1-9   Larry Wall's Practical Extraction 
ii  spamassassin  3.3.0-1Perl-based spam filter using text 
ii  tesseract-ocr-eng 2.00-1 tesseract-ocr language files for E

fuzzyocr recommends no packages.

fuzzyocr suggests no packages.

-- no debconf information
--- Logging.pm.ORIG 2010-02-03 10:54:38.0 +0100
+++ Logging.pm  2010-02-03 10:55:49.0 +0100
@@ -31,7 +31,8 @@ sub logfile {
 my $time = strftime(%Y-%m-%d %H:%M:%S,localtime(time));
 $logtext =~ s/\n/\n  /g;
 
-unless ( open LOGFILE, , $conf-{focr_logfile} ) {
+my $fname = 
Mail::SpamAssassin::Util::untaint_file_path($conf-{focr_logfile});
+unless ( open LOGFILE, , $fname ) {
warn Can't open $conf-{focr_logfile} for writing, check permissions;
return;
 }

Bug#558761: Upgrading xkb-data fails

[Arjan Opmeer]

Package: xkb-data
Version: 1.7-1
Severity: normal

Today upgrading of xkb-data failed:

Setting up xkb-data (1.7-1) ...
dpkg: error processing xkb-data (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 xkb-data

I believe this is because of this line in the postinst script:

   rmdir --ignore-fail-on-non-empty /etc/X11/xkb 2/dev/null

On my system /etc/X11/xkb is a symlink to the directory /usr/share/X11/xkb.
Trying to run that rmdir command gives the error:

   rmdir: failed to remove `/etc/X11/xkb': Not a directory


Arjan


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.27.21 (PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#557182: Upgrade of non-standalone vsftpd fails

[Arjan Opmeer]

Package: vsftpd
Version: 2.2.2-1
Severity: normal

When using vsftp in non-standalone mode (i.e. run from inetd) upgrading the
package fails:

Setting up vsftpd (2.2.2-1) ...
vsftpd user (ftp) already exists, doing nothing.

vsftpd directory (/srv/ftp) already exists, doing nothing.
/etc/vsftpd.conf: listen disabled - service will not start
invoke-rc.d: initscript vsftpd, action start failed.
dpkg: error processing vsftpd (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 vsftpd

Shouldn't line 45 of the initscript be changed from

   Check_standalone_mode || exit

to

   Check_standalone_mode || exit 0

to exit cleanly in this case?


Arjan


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.27.21 (PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages vsftpd depends on:
ii  adduser   3.111  add and remove users and groups
ii  debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii  libc6 2.10.1-7   GNU C Library: Shared libraries
ii  libcap2   1:2.17-2   support for getting/setting POSIX.
ii  libpam-modules1.1.0-4Pluggable Authentication Modules f
ii  libpam0g  1.1.0-4Pluggable Authentication Modules l
ii  libssl0.9.8   0.9.8k-6   SSL shared libraries
ii  libwrap0  7.6.q-18   Wietse Venema's TCP wrappers libra
ii  netbase   4.37   Basic TCP/IP networking system

Versions of packages vsftpd recommends:
ii  logrotate 3.7.8-4Log rotation utility

vsftpd suggests no packages.

-- debconf information:
* vsftpd/username: ftp
* vsftpd/directory: /srv/ftp



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#557182: Upgrade of non-standalone vsftpd fails

[Arjan Opmeer]

Oh,

The 'restart' case uses the same logic so line 71 should probably also be
modified.


Arjan




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#548439: Inotify support breaks tail -F on syslog

[Arjan Opmeer]

Since coreutils 7.5 tail uses inotify. However it is not capable to follow
the sequence of file operations that happen when /var/log/syslog is rotated
by its daily cron job. This means that 'tail -F /var/log/syslog' will stop
producing output as soon as the file is rotated.

Let me give a demonstration. Open two terminal windows and enter the
following commands:

Terminal 1  Terminal 2
--  --

echo line 1  somefile
tail -F somefile

echo line 2  somefile
savelog -m 640 -c 7 somefile
echo line 3  somefile
echo line 4  somefile

This results in the following output from the tail command:

line 1
line 2
tail: `somefile' has been replaced;  following end of new file

Notice that tail fails to follow the newly created somefile and never shows
lines 3 and 4. That this is caused by the new inotify code can be
demonstrated by using the latest git checkout of coreutils. This version
still fails the above scenario, but by supplying the undocumented
'---disable-inotify' flag the inotify code is disabled and the old polling
behaviour is used. This old behaviour can cope with the logrotate sequence
and will correctly show the contents of the new file.

Could you use this information to file a bug report for GNU coreutils to
have the inotify implementation of tail fixed? In the meantime should the
Debian version of tail maybe be build without inotify support because it no
longer functions the way that users have come to expect?


Arjan



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#550311: slant: Please make shading of filled squares configurable

[Arjan Opmeer]

Package: sgt-puzzles
Version: 8605-2
Severity: wishlist
Tags: patch

Recently a change was made to slant that provides shading of filled squares.
However I find that the resulting checkerboard pattern of filled and
non-filled squares is distracting, preventing me from easily seeing the
bigger structures and making it harder to determine a next move.

Therefore I would like to suggest to apply one of the two attached patches.
The first and simplest one adds an environment variable to override the game
default and disable shading of filled squares. The second is a bit more
advanced and also allows runtime toggling of the shading by clicking the
middle mouse button or pressing the S or F key.


Arjan

-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.27.21 (PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages sgt-puzzles depends on:
ii  libatk1.0-0   1.28.0-1   The ATK accessibility toolkit
ii  libc6 2.9-27 GNU C Library: Shared libraries
ii  libcairo2 1.8.8-2The Cairo 2D vector graphics libra
ii  libfontconfig12.6.0-4generic font configuration library
ii  libfreetype6  2.3.9-5FreeType 2 font engine, shared lib
ii  libglib2.0-0  2.22.1-1   The GLib library of C routines
ii  libgtk2.0-0   2.18.2-1   The GTK+ graphical user interface 
ii  libpango1.0-0 1.26.0-1   Layout and rendering of internatio

Versions of packages sgt-puzzles recommends:
ii  epiphany-browser [www-br 2.28.0-4Intuitive GNOME web browser
ii  iceweasel [www-browser]  3.5.2-1 lightweight web browser based on M
ii  links2 [www-browser] 2.2-1+b1Web browser running in both graphi
ii  lynx-cur [www-browser]   2.8.8dev.1-1Text-mode WWW Browser with NLS sup
ii  w3m [www-browser]0.5.2-2.1   WWW browsable pager with excellent
ii  yelp 2.28.0+webkit-1 Help browser for GNOME

sgt-puzzles suggests no packages.

-- no debconf information
--- sgt-puzzles-8605.ORIG/slant.c	2009-10-09 04:45:36.0 +0200
+++ sgt-puzzles-8605.ENV/slant.c	2009-10-09 05:01:19.0 +0200
@@ -1884,13 +1884,19 @@ static void draw_tile(drawing *dr, game_
 int chesscolour = (x ^ y)  1;
 int fscol = chesscolour ? COL_SLANT2 : COL_SLANT1;
 int bscol = chesscolour ? COL_SLANT1 : COL_SLANT2;
+static int shade_filled = -1;
+
+if (shade_filled  0) {
+char *env = getenv(SLANT_SHADE_FILLED);
+shade_filled = (!env || (env[0] == 'y' || env[0] == 'Y'));
+}
 
 clip(dr, COORD(x), COORD(y), TILESIZE, TILESIZE);
 
 draw_rect(dr, COORD(x), COORD(y), TILESIZE, TILESIZE,
 	  (v  FLASH) ? COL_GRID :
   (v  CURSOR) ? COL_CURSOR :
-	  (v  (BACKSLASH | FORWSLASH)) ? COL_LOWLIGHT :
+	  (shade_filled  (v  (BACKSLASH | FORWSLASH))) ? COL_LOWLIGHT :
 	  COL_BACKGROUND);
 
 /*
--- sgt-puzzles-8605.ORIG/slant.c	2009-10-09 04:45:36.0 +0200
+++ sgt-puzzles-8605.TOGGLE/slant.c	2009-10-09 05:05:28.0 +0200
@@ -1597,12 +1597,15 @@ static char *game_text_format(game_state
 
 struct game_ui {
 int cur_x, cur_y, cur_visible;
+int shade_filled;
 };
 
 static game_ui *new_ui(game_state *state)
 {
 game_ui *ui = snew(game_ui);
+char *env = getenv(SLANT_SHADE_FILLED);
 ui-cur_x = ui-cur_y = ui-cur_visible = 0;
+ui-shade_filled = (!env || (env[0] == 'y' || env[0] == 'Y'));
 return ui;
 }
 
@@ -1657,6 +1660,7 @@ static void game_changed_state(game_ui *
 #define ERR_BL0x0001L
 #define ERR_BR0x0002L
 #define CURSOR0x0004L
+#define SHADEFILL 0x0008L
 
 struct game_drawstate {
 int tilesize;
@@ -1702,6 +1706,10 @@ static char *interpret_move(game_state *
 y = FROMCOORD(y);
 if (x  0 || y  0 || x = w || y = h)
 return NULL;
+} else if (button == MIDDLE_BUTTON || button == 'f' || button == 'F' ||
+   button == 's' || button == 'S') {
+ui-shade_filled = !ui-shade_filled;
+return ;
 } else if (IS_CURSOR_SELECT(button)) {
 if (!ui-cur_visible) {
 ui-cur_visible = 1;
@@ -1890,7 +1898,7 @@ static void draw_tile(drawing *dr, game_
 draw_rect(dr, COORD(x), COORD(y), TILESIZE, TILESIZE,
 	  (v  FLASH) ? COL_GRID :
   (v  CURSOR) ? COL_CURSOR :
-	  (v  (BACKSLASH | FORWSLASH)) ? COL_LOWLIGHT :
+	  (v  SHADEFILL) ? COL_LOWLIGHT :
 	  COL_BACKGROUND);
 
 /*
@@ -2012,6 +2020,8 @@ static void game_redraw(drawing *dr, gam
 ds-todraw[(y+2)*(w+2)+(x+1)] |= T_R;
 ds-todraw[(y+1)*(w+2)+(x+2)] |= L_B;
 ds-todraw[(y+2)*(w+2)+(x+2)] |= C_TL;
+if (ui-shade_filled)
+

Bug#541060: chkrootkit: daily cron job fails with exit code 1 because of addition of OSX_RSPLUG test

[Arjan Opmeer]

Package: chkrootkit
Version: 0.49-1
Severity: normal

Because the daily cron job runs with 'set -e' it fails whenever chkrootkit
exits with a non-zero exit code. However because chkrootkit tests in the
order $TROJAN $TOOLS (internal external) the exit code of the script is
whatever happens to be the exit code of the last external tool.

Previously the last external tool was chkutmp a standalone program that
returns with an exit code of 0 on succes. With the addition of OSX_RSPLUG to
the list the exit code of the script is now the exit code of the OSX_RSPLUG
test. Normally it returns NOT_INFECTED. Which is defined as 1. Hence the
non-zero exit code.

See the difference:

   # chkrootkit chkutmp; echo $?
   ROOTDIR is `/'
   Checking `chkutmp'... chkutmp: nothing deleted
   0

and

   # chkrootkit OSX_RSPLUG; echo $?
   ROOTDIR is `/'
   Checking `OSX_RSPLUG'...  not infected
   1

Maybe the script should contain an explicit 'exit 0' at the end to indicate
that all went well?


Arjan


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.27.21 (PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages chkrootkit depends on:
ii  binutils  2.19.51.20090805-1 The GNU assembler, linker and bina
ii  debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii  libc6 2.9-23 GNU C Library: Shared libraries
ii  net-tools 1.60-23The NET-3 networking toolkit
ii  procps1:3.2.8-1  /proc file system utilities

chkrootkit recommends no packages.

chkrootkit suggests no packages.

-- debconf information:
* chkrootkit/run_daily_opts: -q -n
* chkrootkit/run_daily: true
* chkrootkit/diff_mode: true



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#540459: fuzzyocr depends on obsolete libungif-bin

[Arjan Opmeer]

Package: fuzzyocr
Version: 3.5.1+svn135-1.1
Severity: normal

In unstable libungif-bin is a transitional package to giflib-tools. However,
it can not be removed because fuzzyocr depends on it. I think you need to
tweak the dependencies of fuzzyocr so that it picks up that giflib-tools
provides libungif-bin. I don't know exactly how pacakage dependencies work,
but is this problem maybe caused by depending on a version =4 ?


Arjan

-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.27.21 (PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages fuzzyocr depends on:
ii  giflib-tools [libungif-bin]   4.1.6-7library for GIF images (utilities)
ii  gifsicle  1.55-1 Tool for manipulating GIF images
ii  gocr  0.46-2 A command line OCR
ii  libdbd-mysql-perl 4.012-1A Perl5 database interface to the 
ii  libmldbm-sync-perl0.30-3 Perl module for safe concurrent ac
ii  libstring-approx-perl 3.26-1 Perl extension for approximate mat
ii  libtie-cache-perl 0.17-4 perl Tie::Cache - LRU Cache in Mem
ii  libungif-bin  4.1.6-6library for GIF images (transition
ii  netpbm2:10.0-12  Graphics conversion tools
ii  ocrad 0.17-4 Optical Character Recognition prog
ii  perl [libdigest-md5-perl] 5.10.0-24  Larry Wall's Practical Extraction 
ii  spamassassin  3.2.5-4Perl-based spam filter using text 
ii  tesseract-ocr-eng 2.00-1 tesseract-ocr language files for E

fuzzyocr recommends no packages.

fuzzyocr suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#539366: apt: Daily cron job exits with 'integer expression expected'

[Arjan Opmeer]

Package: apt
Version: 0.7.22
Severity: normal

Today the daily apt cron job exited with

   /etc/cron.daily/apt: line 310: [: : integer expression expected

This is because $VERBOSE in this line in debug_echo

   310 if [ $VERBOSE -ge 1 ]; then

expands to the empty string. I believe this is caused a few lines down by
this piece of code:

   322 # Set VERBOSE mode from  apt-config (or inherit from environment)
   323 eval $(apt-config shell VERBOSE APT::Periodic::Verbose)
   324 debug_echo verbose level $VERBOSE
   325 if [ -z $VERBOSE ]; then
   326 VERBOSE=0
   327 fi

I think the test for the empty string in lines 325-327 and the printing of
the resulting value with debug_echo on line 324 should be swapped.


Arjan


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.27.21 (PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages apt depends on:
ii  debian-archive-keyring2009.01.31 GnuPG archive keys of the Debian a
ii  libc6 2.9-23 GNU C Library: Shared libraries
ii  libgcc1   1:4.4.1-1  GCC support library
ii  libstdc++64.4.1-1The GNU Standard C++ Library v3

apt recommends no packages.

Versions of packages apt suggests:
pn  apt-doc   none (no description available)
pn  aptitude | synaptic | gnome-a none (no description available)
ii  bzip2 1.0.5-3high-quality block-sorting file co
ii  dpkg-dev  1.15.3.1   Debian package development tools
ii  lzma  4.43-14Compression method of 7z format in
ii  python-apt0.7.11.1   Python interface to libapt-pkg

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#531671: sgt-puzzles: Modal dialogs are resizable

[Arjan Opmeer]

Package: sgt-puzzles
Version: 8541-1
Severity: minor
Tags: patch

Modal dialogs from sgt-puzzles (like Game-Specific, Game-Random Seed,
Type-Custom and Help-About) are resizable. This is because Gtk windows are
user resizable by default. However, because these dialog are obviously not
meant to be resizable (see the widget layout break when you try) I think it
makes sense to disable this functionality. Included patch clears the
resizable flag for the message-box() and get-config() windows.

--- gtk.c.ORIG  2009-05-31 12:36:47.0 +0200
+++ gtk.c   2009-05-31 12:38:42.0 +0200
@@ -850,6 +850,7 @@ int message_box(GtkWidget *parent, char 
 gtk_signal_connect(GTK_OBJECT(window), destroy,
GTK_SIGNAL_FUNC(window_destroy), NULL);
 gtk_window_set_modal(GTK_WINDOW(window), TRUE);
+gtk_window_set_resizable(GTK_WINDOW(window), FALSE);
 gtk_window_set_transient_for(GTK_WINDOW(window), GTK_WINDOW(parent));
 /* set_transient_window_pos(parent, window); */
 gtk_widget_show(window);
@@ -1084,6 +1085,7 @@ static int get_config(frontend *fe, int 
 gtk_signal_connect(GTK_OBJECT(fe-cfgbox), key_press_event,
   GTK_SIGNAL_FUNC(win_key_press), cancel);
 gtk_window_set_modal(GTK_WINDOW(fe-cfgbox), TRUE);
+gtk_window_set_resizable(GTK_WINDOW(fe-cfgbox), FALSE);
 gtk_window_set_transient_for(GTK_WINDOW(fe-cfgbox),
 GTK_WINDOW(fe-window));
 /* set_transient_window_pos(fe-window, fe-cfgbox); */


Arjan


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.27.21 (PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages sgt-puzzles depends on:
ii  libatk1.0-0   1.26.0-1   The ATK accessibility toolkit
ii  libc6 2.9-13 GNU C Library: Shared libraries
ii  libcairo2 1.8.6-2+b1 The Cairo 2D vector graphics libra
ii  libfontconfig12.6.0-3generic font configuration library
ii  libfreetype6  2.3.9-5FreeType 2 font engine, shared lib
ii  libglib2.0-0  2.20.3-1   The GLib library of C routines
ii  libgtk2.0-0   2.16.1-2   The GTK+ graphical user interface 
ii  libpango1.0-0 1.24.2-1   Layout and rendering of internatio

Versions of packages sgt-puzzles recommends:
ii  epiphany-webkit [www-browser 2.27.2-2Intuitive GNOME web browser - WebK
ii  iceweasel [www-browser]  3.0.9-1 lightweight web browser based on M
ii  links2 [www-browser] 2.2-1+b1Web browser running in both graphi
ii  lynx-cur [www-browser]   2.8.7pre4-1 Text-mode WWW Browser with NLS sup
ii  w3m [www-browser]0.5.2-2+b1  WWW browsable pager with excellent
ii  yelp 2.24.0-2Help browser for GNOME 2

sgt-puzzles suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#519817: Quotes around $PWD does not work

[Arjan Opmeer]

Notice how in the orignal patch:

   +args=--start --chdir $PWD --nicelevel $nice --quiet --oknodo

there are no quotes (') around $PWD. Debian version 3.2-21 of init-functions
does includes these quotes. However start-stop-daemon does not understand
quotes in the argument to --chdir.

Notice how this prevents gdm from starting:

   # /etc/init.d/gdm start
   Starting GNOME Display Manager: gdm/sbin/start-stop-daemon: Unable to 
chdir() to '/' (No such file or directory)

Removing the quotes as in the original patch makes this work again.

So please provide a new version of lsb-base with this fixed or teach
start-stop-daemon not to care about quotes in arguments.

Thanks!


Arjan



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#510450: Please test packages fixing these bugs in samba

[Arjan Opmeer]

On Fri, Jan 09, 2009 at 05:56:03PM +0100, Christian Perrier wrote:
 I prepared samba 3.2.5 packages that supposedly fix these bugs:
 
   * Fix segfault whan accessign some NAS devices running old versions of
 Samba Closes: #500129
   * Fix process crush when using gethostbyname_r in several threads
 Closes: #509101, #510450
 
 Bug submitters, could you please test them and report if they fix your
 issues.

I can confirm that these packages fix smbclient segfaulting when accessing
my CHD3NET network storage. Because gnome-vfs uses libsmbclient it is now
also possible to access the device via the Nautilus file manager.


Arjan



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#496685: gnome-screensaver: does not honour current X gamma

[Arjan Opmeer]

Package: gnome-screensaver
Version: 2.22.2-1
Severity: minor

Currently gnome-screensavers blank screen theme unfades to the gamma setting
it reads at program startup time (normally the start of your GNOME session).

However if the user in the mean time altered the X gamma with a utility like
xgamma this new setting will not be honoured. Thus causing the X gamma
setting to be reset everytime the screensaver kicks in and subsequently
unfades.

It would be nice if gnome-screensaver could be modified to read the current
X gamma setting just prior to blanking the screen, so it can unfade to the
setting the user is expecting and not some old value.


Arjan

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.23.14 (PREEMPT)
Locale: LANG=C, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages gnome-screensaver depends on:
ii  dbus   1.2.1-3   simple interprocess messaging syst
ii  gconf2 2.22.0-1  GNOME configuration database syste
ii  gnome-icon-theme   2.22.0-1  GNOME Desktop icon theme
ii  libatk1.0-01.22.0-1  The ATK accessibility toolkit
ii  libc6  2.7-13GNU C Library: Shared libraries
ii  libcairo2  1.6.4-6   The Cairo 2D vector graphics libra
ii  libdbus-1-31.2.1-3   simple interprocess messaging syst
ii  libdbus-glib-1-2   0.76-1simple interprocess messaging syst
ii  libfontconfig1 2.6.0-1   generic font configuration library
ii  libfreetype6   2.3.7-2   FreeType 2 font engine, shared lib
ii  libgconf2-42.22.0-1  GNOME configuration database syste
ii  libgl1-mesa-glx [libgl 7.0.3-5   A free implementation of the OpenG
ii  libglade2-01:2.6.2-1 library to load .glade files at ru
ii  libglib2.0-0   2.16.5-1  The GLib library of C routines
ii  libgnome-menu2 2.22.2-3  an implementation of the freedeskt
ii  libgnomekbd2   2.22.0-1  GNOME library to manage keyboard c
ii  libgnomekbdui2 2.22.0-1  User interface library for libgnom
ii  libgtk2.0-02.12.11-3 The GTK+ graphical user interface 
ii  libice62:1.0.4-1 X11 Inter-Client Exchange library
ii  libnotify1 [libnotify1 0.4.4-3   sends desktop notifications to a n
ii  libpam0g   1.0.1-3   Pluggable Authentication Modules l
ii  libpango1.0-0  1.20.5-1  Layout and rendering of internatio
ii  libpng12-0 1.2.27-1  PNG library - runtime
ii  libsm6 2:1.0.3-2 X11 Session Management library
ii  libx11-6   2:1.1.4-2 X11 client-side library
ii  libxcursor11:1.1.9-1 X cursor management library
ii  libxext6   2:1.0.4-1 X11 miscellaneous extension librar
ii  libxfixes3 1:4.0.3-2 X11 miscellaneous 'fixes' extensio
ii  libxi6 2:1.1.3-1 X11 Input extension library
ii  libxinerama1   2:1.0.3-2 X11 Xinerama extension library
ii  libxklavier12  3.5-1 X Keyboard Extension high-level AP
ii  libxml22.6.32.dfsg-2 GNOME XML library
ii  libxrandr2 2:1.2.3-1 X11 RandR extension library
ii  libxrender11:0.9.4-2 X Rendering Extension client libra
ii  libxss11:1.1.3-1 X11 Screen Saver extension library
ii  libxxf86misc1  1:1.0.1-3 X11 XFree86 miscellaneous extensio
ii  libxxf86vm11:1.0.2-1 X11 XFree86 video mode extension l
ii  zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime

Versions of packages gnome-screensaver recommends:
ii  gnome-power-manager   2.22.1-2   frontend for gnome-powermanager
ii  libpam-gnome-keyring  2.22.3-1   PAM module to unlock the GNOME key
pn  rss-glx   none (no description available)

gnome-screensaver suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#488213: groff-base: Escaped version of apostroph (\') does not display in ISO-8859-15 locale

[Arjan Opmeer]

Package: groff-base
Version: 1.18.1.1-20
Severity: normal

There are manpages that use \' (the escaped version of the apostroph) to get
pretty quotes around words. However \' maps to the acute accent which is
not present in ISO-8859-15 (and some other LatinX variants). Thus the next
command in the pipeline 'iconv -c -f ISO-8859-1 -t ISO-8859-15' happily
strips out those characters.

Which gives some interesting results when this happens to be in a piece of
text that must be rendered bold. On the terminal this is accomplished by
using overstriking meaning every character is printed twice with a backspace
in between. However when some characters are stripped out by iconv there are
stray backspaces left that eat away the remaining text!

Example:

   env LC_ALL=en_US.ISO-8859-15 man smartd.conf

and see the explanation for the -l option. Notice how

   ...by using the '-t short' and '-t long' options...

gets truncated to

   ...by using the-t shor and-t lon options...

Clearly not a very desirable result. Maybe a new mdoc.local rule can be
added like so:

   .  if '\*[.T]'latin1' \
   .char \' \N'39'

to always map the \' (escaped apostroph) back to the single ' (apostroph)
for the latin1 output device. For UTF8 locales the pretty quotes remain
intact. For the ascii output device the escaped apostrophs already get
mapped back to the single ones.


Arjan

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.23.14 (PREEMPT)
Locale: LANG=C, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages groff-base depends on:
ii  libc6 2.7-12 GNU C Library: Shared libraries
ii  libgcc1   1:4.3.1-2  GCC support library
ii  libstdc++64.3.1-2The GNU Standard C++ Library v3

groff-base recommends no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#485990: ascii(7): Apostroph is accent in UTF-8 environment

[Arjan Opmeer]

On Fri, Jun 27, 2008 at 20:10, Stuart Brady [EMAIL PROTECTED] wrote:

 \`, \(aq, \- etc. yield the real ASCII characters.

So groff(7) is wrong in stating that \` is the grave accent and unescaped
yields the ASCII 0x60 backquote?

How about groff_char(7) that states that \[cq] yields the real ASCII 39
character? The one that we want to display in the ascii(7) man page.

 `, ', - etc. yield 'pretty' quotes, dashes, etc.

Life would sure be easier when every character would just print as itself and
people wanting pretty quotes should use escaped versions to clearly state
their intent... :)


Arjan



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#485990: ascii(7): Apostroph is accent in UTF-8 environment

[Arjan Opmeer]

Looking at the man page I see that the escaped version of some characters
are used.

  \e  for \  (which won't work when the escape character is redefined)
  \_ for _  what is that non-printable, zero width character doing there?
  \`  for `  but the escaped version maps to the grave accent
  \'  for '  but the escaped version maps to the acute accent
  \-  for -  why? we want the real minus character, not some hyphen

As UTF8 and all the ISO-8859-x fonts have the standard ASCII character set
at the beginning, why not use the real ASCII characters in this man page?
After all, it is about the ASCII set now how you could pretty format that on
some output device.


Arjan



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#481383: fuzzyocr3: FuzzyOcr does not work with tesseract 2.03

[Arjan Opmeer]

Package: fuzzyocr3
Version: 3.5.1-2
Severity: normal
Tags: patch

Since version 2.03 tesseract requires the image file to have a .tif
extension to work properly. However FuzzyOcr uses the filename
prep.maketiff.out. This stops tesseract from working as seen from this log
entry:

Exec  : pnmtotiff -color -truecolor
Stdin : /tmp/.spamassassin15003RD32Twtmp/me.pnm
Stdout: /tmp/.spamassassin15003RD32Twtmp/prep.maketiff.out
Stderr: /tmp/.spamassassin15003RD32Twtmp/prep.maketiff.err
Exec  : /usr/bin/tesseract /tmp/.spamassassin15003RD32Twtmp/prep.maketiff.out 
/tmp/.spamassassin15003RD32Twtmp/scanset.tesseract.out
Stdout: /dev/null
Stderr: /tmp/.spamassassin15003RD32Twtmp/scanset.tesseract.err
Elapsed [31574]: 0.233304 sec. (/usr/bin/tesseract: exit 31)
Unable to read output from 
/tmp/.spamassassin15003RD32Twtmp/scanset.tesseract.out.txt for scanset 
tesseract
Errors in Scanset tesseract
Return code: 7936, Error: Tesseract Open Source OCR Engine
   name_to_image_type:Error:Unrecognized image 
type:/tmp/.spamassassin15003RD32Twtmp/prep.maketiff.out
   IMAGE::read_header:Error:Can't read this image 
type:/tmp/.spamassassin15003RD32Twtmp/prep.maketiff.out
   /usr/bin/tesseract:Error:Read of file 
/failed:/tmp/.spamassassin15003RD32Twtmp/prep.maketiff.out
   Signal_exit 31 ABORT. LocCode: 3  AbortCode: 3
Skipping scanset because of errors, trying next...

I patched around this by making sure the maketiff preprocessor uses a
different output name and by having the scanner part know this.

--- Preprocessor.pm.ORIG2008-05-15 18:24:22.0 +0200
+++ Preprocessor.pm 2008-05-15 18:51:03.0 +0200
@@ -15,6 +15,9 @@ sub run {
 my $tmpdir = FuzzyOcr::Config::get_tmpdir();
 my $label = $self-{label};
 my $output = $tmpdir/prep.$label.out;
+if ($label =~ /maketiff/) {
+$output = $tmpdir/prep.$label.tif;
+}
 my $stderr = $tmpdir/prep.$label.err;
 
 my $stdin = undef;
--- Scanset.pm.ORIG 2008-05-15 18:56:11.0 +0200
+++ Scanset.pm  2008-05-15 19:03:26.0 +0200
@@ -63,7 +63,12 @@ sub run {
 return ($retcode,@result);
 }
 # Input of next processor is output of last
-$input = $tmpdir/prep.$plabel.out;
+# Output name of maketiff is special!
+if ($plabel =~ /maketiff/) {
+$input = $tmpdir/prep.$plabel.tif;
+} else {
+$input = $tmpdir/prep.$plabel.out;
+}
 }
 }

It is not the nicest solution, but it works :). The other solution would be
to have the .tif filename extension requirement removed from tesseract. I'll
leave that discussion to you Debian developers... :)

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.23.14 (PREEMPT)
Locale: LANG=C, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages fuzzyocr3 depends on:
ii  gifsicle 1.49-1  Tool for manipulating GIF images
ii  gocr 0.41-1+b1   A command line OCR
ii  libmldbm-sync-perl   0.30-2  Perl module for safe concurrent ac
ii  libstring-approx-perl3.25-1+b1   Perl extension for approximate mat
ii  libungif-bin 4.1.6-4 library for GIF images (transition
ii  netpbm   2:10.0-11.1 Graphics conversion tools
ii  ocrad0.17-3  Optical Character Recognition prog
ii  perl [libdigest-md5-perl]5.10.0-10   Larry Wall's Practical Extraction 
ii  spamassassin 3.2.4-1 Perl-based spam filter using text 

fuzzyocr3 recommends no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#447550: Please rebuild input-utils with a newer version of linux-input.h

[Arjan Opmeer]

Package: input-utils
Version: 0.0.20051128-3
Severity: wishlist

The input-utils.h file in the source package of input-utils is from linux
kernel version 2.6.0-test3 and hence misses newly defined keys and buttons.

Please rebuild with a newer version so that the the input-event utility can
print the actual name instead of null when confronted with those newly
defined keys or buttons.

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.22.6 (PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages input-utils depends on:
ii  libc6 2.6.1-6GNU C Library: Shared libraries

input-utils recommends no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#425962: spamassassin: daily cronjob should not fail on 1 exit code of sa-update when there are no updates

[Arjan Opmeer]

Package: spamassassin
Version: 3.2.0-1
Severity: normal

Mail from Cron Daemon:

  run-parts: /etc/cron.daily/spamassassin exited with return code 1

but from sa-update we learn:

  # by default, exit code is 1, to indicate no updates occurred
  my $exit = 1;

So the cronjob should be able to cope with that exit code gracefully instead
of bombing out and mailing the root account.


Arjan

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.19.1
Locale: LANG=C, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages spamassassin depends on:
ii  libarchive-tar-perl   1.31-1 Archive::Tar - manipulate tar file
ii  libdigest-sha1-perl   2.11-2 NIST SHA-1 message digest algorith
ii  libhtml-parser-perl   3.56-1 A collection of modules that parse
ii  libio-zlib-perl   1.04-1 IO:: style interface to Compress::
ii  libnet-dns-perl   0.59-1 Perform DNS queries from a Perl sc
ii  libsocket6-perl   0.19-1 Perl extensions for IPv6
ii  libsys-hostname-long-perl 1.4-1  Figure out the long (fully-qualifi
ii  libwww-perl   5.805-1WWW client/server library for Perl
ii  perl  5.8.8-7Larry Wall's Practical Extraction 

Versions of packages spamassassin recommends:
ii  gnupg1.4.6-2 GNU privacy guard - a free PGP rep
ii  libmail-spf-query-perl   1:1.999.1-3 query SPF (Sender Policy Framework
pn  libsys-syslog-perl   none  (no description available)
ii  re2c 0.9.12-2Tool for generating fast C-based r
ii  spamc3.2.0-1 Client for SpamAssassin spam filte

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#418649: hotkey-setup: Support for MSI MS-1035 (aka L725) laptop keys

[Arjan Opmeer]

Package: hotkey-setup
Version: 0.1-17
Severity: normal


The includes changes enable or quiet some of the multimedia/Fn key combo's
on the MSI MS-1035 (aka L725) laptop. Hope this helps... :)


Arjan

--- /etc/init.d/hotkey-setup.ORIG   2007-04-11 00:56:16.0 +0200
+++ /etc/init.d/hotkey-setup2007-04-11 01:00:51.0 +0200
@@ -93,6 +93,14 @@
esac
;;
 
+   MICRO-STAR*)
+   case $name in
+   *INFINITY*)
+   . /usr/share/hotkey-setup/micro-star-infinity.hk
+   ;;
+   esac
+   ;;
+
Samsung*)
. /usr/share/hotkey-setup/samsung.hk
;;
--- /usr/share/hotkey-setup/key-constants.OLD   2007-04-11 02:17:35.0 
+0200
+++ /usr/share/hotkey-setup/key-constants   2007-04-11 02:17:35.0 
+0200
@@ -1,4 +1,4 @@
-# Generated from /usr/include/linux/input.h dated Sat Feb  4 14:58:52 GMT 2006
+# Generated from /usr/include/linux/input.h dated Fri Mar 23 20:52:51 GMT 2007
 KEY_RESERVED=0
 KEY_ESC=1
 KEY_1=2
@@ -217,6 +217,18 @@
 KEY_BRIGHTNESSDOWN=224
 KEY_BRIGHTNESSUP=225
 KEY_MEDIA=226
+KEY_SWITCHVIDEOMODE=227
+KEY_KBDILLUMTOGGLE=228
+KEY_KBDILLUMDOWN=229
+KEY_KBDILLUMUP=230
+KEY_SEND=231
+KEY_REPLY=232
+KEY_FORWARDMAIL=233
+KEY_SAVE=234
+KEY_DOCUMENTS=235
+KEY_BATTERY=236
+KEY_BLUETOOTH=237
+KEY_WLAN=238
 KEY_UNKNOWN=240
 KEY_LOCK=$KEY_COFFEE
 KEY_LIGHT=$KEY_F19
@@ -224,4 +236,3 @@
 KEY_ROTATESCREEN=$KEY_F21
 KEY_VIDEOMODECYCLE=$KEY_F22
 KEY_PRESENTATION=$KEY_F23
-KEY_BATTERY=236
--- /dev/null   2007-04-11 02:23:26.108166657 +0200
+++ /usr/share/hotkey-setup/micro-star-infinity.hk  2007-04-11 
02:23:27.0 +0200
@@ -0,0 +1,24 @@
+# MSI inifity (e.g. MSI MS-1035 aka L725)
+
+# Fn-key combinations
+   # Fn-F2   External VGA toggle   
# Handled by ACPI
+setkeycodese064$KEY_PROG1  # Fn-F3   Touchpad disable  
# No Elantech Touchpad support yet :(
+   # Just choose some key to quiet 
it?
+setkeycodese077$KEY_BRIGHTNESSDOWN # Fn-F4   Brightness down
+setkeycodese078$KEY_BRIGHTNESSUP   # Fn-F5   Brightness up
+#setkeycodes   e02e$KEY_VOLUMEDOWN # Fn-F7   Volume down   
# Canonical mapping, commented out.
+#setkeycodes   e030$KEY_VOLUMEUP   # Fn-F8   Volume up 
# Canonical mapping, commented out.
+#setkeycodes   e020$KEY_MUTE   # Fn-F9   Sound On/Off  
# Canonical mapping, commented out.
+#setkeycodes   e05f$KEY_SLEEP  # Fn-F12  Sleep Zz  
# Canonical mapping, commented out.
+
+# Four special keys around power button
+#setkeycodes   e06c$KEY_MAIL   # 'envelope' button  Mail   
# Canonical mapping, commented out. 
+#setkeycodes   e032$KEY_WWW# 'e' button WWW
# Canonical mapping, commented out.
+setkeycodese076$KEY_WLAN   # 'satellite dish' key   WLAN on
+setkeycodese062$KEY_BLUETOOTH  # 'sattelite dish' key   
Bluetooth on
+setkeycodese079$KEY_SEARCH # 'magnifying glass' key Search?
+
+# Not on keyboard but generated anyway
+# Are these the correct mappings?
+setkeycodese071$KEY_POWER  # plugging in AC connector  
Running on AC power
+setkeycodese072$KEY_BATTERY# unplugging AC connector   
Running on battery


-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.20.4
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages hotkey-setup depends on:
ii  dmidecode 2.8-4  Dump Desktop Management Interface 

hotkey-setup recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#418649: hotkey-setup: Support for MSI MS-1035 (aka L725) laptop keys

[Arjan Opmeer]

On 4/11/07, Arjan Opmeer [EMAIL PROTECTED] wrote:

+setkeycodese062$KEY_BLUETOOTH  # 'sattelite dish' key   
Bluetooth on


Hmm okey, that should probably read satellite also... :)


+# Not on keyboard but generated anyway
+# Are these the correct mappings?
+setkeycodese071$KEY_POWER  # plugging in AC connector  
Running on AC power


Well this one is definately wrong. :)
It's not the power button we're pressing and we don't want to shutdown.
Also map it to $KEY_PROG1 to shut up atkbd.c complaining?


+setkeycodese072$KEY_BATTERY# unplugging AC connector   
Running on battery


Not sure about this one. Is this keycode reserved for the battery
status shortcut key on some laptops?


Arjan


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#414092: airport-utils: Tools start and quit immediately without working

[Arjan Opmeer]

Package: airport-utils
Version: 1-3
Severity: grave
Justification: renders package unusable


All of the aiport-utils tools don't seem to be working anymore. They start
up and immediately stop without any error. Trying to run the tools with

   java -jar sometool.jar

gives the same result. Disk rattling, program starting, but then nothing and
you're returned to the shell prompt without a workable tool.

Is there maybe some mysterious incompatibility problem between the Sun 6 JRE
and the airport utils?


Arjan

-- System Information:
Debian Release: 4.0
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.19.1
Locale: LANG=C, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)

Versions of packages airport-utils depends on:
pn  gij | java-virtual-machinenone (no description available)
ii  libgcj7-awt   4.1.1-20   AWT peer runtime libraries for use
ii  sun-java6-jre [java2-runtime] 6-00-2 Sun Java(TM) Runtime Environment (

airport-utils recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#412558: schism: Schism crashes with floating point exception on preferences menu

[Arjan Opmeer]

Package: schism
Version: 1:0.5rc1-1
Severity: normal


How to reproduce: start schism, press enter to continue, press Shift-F5.

The crash has something to do with the way the Debian version is built and
uses Alsa for sound. If you start schism with the -a nosound option, you
can get to the preferences screen without any trouble.

I believe the problem is in the function preferences_set_page in
schism/page_preferences.c where lim in the division can be zero when the
mixer_get_max_volume function does not succeed.

I tried building a local debug version of the Debian source to investigate
further but I cannot reproduce the bug. Apparently rebuilding with my local
(newer?) versions of gcc and libraries is enough to make things work. Maybe
a rebuild is all it takes to fix the Debian version too?

On another note could you read the part on USE_DLTRICK_ALSA in
sys/alsa/midi-alsa.c and find out whether Debian needs this dl-trickery? I
believe the Debian version of libSDL is linked to libasound. Unfortunately
the --enable-alsadltrick option of the configure script seems to be removed
or is broken so building always uses the -DUSE_DLTRICK_ALSA option without a
way of turning it off.


Arjan


-- System Information:
Debian Release: 4.0
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.19.1
Locale: LANG=C, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)

Versions of packages schism depends on:
ii  libc6   2.3.6.ds1-13 GNU C Library: Shared libraries
ii  libgcc1 1:4.1.1-21   GCC support library
ii  libsdl1.2debian 1.2.11-8 Simple DirectMedia Layer
ii  libstdc++6  4.1.1-21 The GNU Standard C++ Library v3

Versions of packages schism recommends:
pn  opencubicplayer   none (no description available)
pn  xmms-modplug  none (no description available)

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#407396: weechat-curses uninstallable on Debian unstable

[Arjan Opmeer]

Package: weechat-curses
Version: 0.2.3-1
Severity: normal


As can be seen below weechat-curses 0.2.3-1 depends on libgnutls11 (=
1.0.16) however libgnutls11 does not appear to be available. This on
Debian unstable where libgnutls13 is the only version. Could you please
rebuild?


Arjan


-- System Information:
Debian Release: 4.0
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.19.1
Locale: LANG=C, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)

Versions of packages weechat-curses depends on:
ii  libc6   2.3.6.ds1-10 GNU C Library: Shared libraries
ii  libgnutls11 ?.?.?-?  the GNU TLS library - runtime libr
ii  libncursesw55.5-5Shared libraries for terminal hand
hi  weechat-common  0.2.3-1  Common files for WeeChat

Versions of packages weechat-curses recommends:
pn  weechat-plugins   none (no description available)

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#395381: gnome-games: New bonded.svg is ugly

[Arjan Opmeer]

Package: gnome-games
Version: 1:2.16.1-2
Severity: wishlist


The new bonded.svg card theme in unstable looks worse than the old
bonded.png version. The letters are less legible and the cards look cramped
and heavy. Please modify the svg cards to look more like the png version.


-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17.8
Locale: LANG=C, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)

Versions of packages gnome-games depends on:
ii  gnome-games-data   1:2.16.1-2data files for the GNOME games
ii  guile-1.6-libs 1.6.8-6   Main Guile libraries
ii  libavahi-client3   0.6.14-2  Avahi client library
ii  libavahi-common3   0.6.14-2  Avahi common library
ii  libavahi-glib1 0.6.14-2  Avahi glib integration library
ii  libc6  2.3.6.ds1-7   GNU C Library: Shared libraries
ii  libcairo2  1.2.4-4   The Cairo 2D vector graphics libra
ii  libesd-alsa0 [libesd0] 0.2.36-3  Enlightened Sound Daemon (ALSA) - 
ii  libgcc11:4.1.1-17GCC support library
ii  libgconf2-42.16.0-2  GNOME configuration database syste
ii  libglade2-01:2.6.0-2 library to load .glade files at ru
ii  libglib2.0-0   2.12.4-1  The GLib library of C routines
ii  libgnome2-02.16.0-2  The GNOME 2 library - runtime file
ii  libgnomeui-0   2.14.1-2  The GNOME 2 libraries (User Interf
ii  libgnomevfs2-0 2.14.2-2+b1   GNOME virtual file-system (runtime
ii  libgtk2.0-02.8.20-3  The GTK+ graphical user interface 
ii  libpango1.0-0  1.14.7-1  Layout and rendering of internatio
ii  librsvg2-common2.14.4-2  SAX-based renderer library for SVG
ii  libstdc++6 4.1.1-17  The GNU Standard C++ Library v3
ii  libxml22.6.26.dfsg-4 GNOME XML library
ii  zlib1g 1:1.2.3-13compression library - runtime

Versions of packages gnome-games recommends:
pn  gnome-games-extra-datanone (no description available)

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#357713: xbase-clients: startx script contains incorrect paths

[Arjan Opmeer]

Package: xbase-clients
Version: 1:7.0.0-2
Followup-For: Bug #357713


I also noted that after upgrading startx did not start my default gnome
session anymore. It seems that the startx script does not contain the
correct paths for xinitrc and xserverrc anymore. One way to fix it is to
edit the script:

--- /usr/bin/startx.OLD 2006-04-11 03:43:17.0 +0200
+++ /usr/bin/startx 2006-04-12 11:49:25.0 +0200
@@ -13,11 +13,11 @@
 #
 # $XFree86: xc/programs/xinit/startx.cpp,v 3.16tsi Exp $
 userclientrc=$HOME/.xinitrc
-sysclientrc=/usr/lib/X11/xinit/xinitrc
+sysclientrc=/etc/X11/xinit/xinitrc


 userserverrc=$HOME/.xserverrc
-sysserverrc=/usr/lib/X11/xinit/xserverrc
+sysserverrc=/etc/X11/xinit/xserverrc
 defaultclient=xterm
 defaultserver=/usr/bin/X
 defaultclientargs=

The other way is to symlink /usr/lib/X11/xinit to /etc/X11/xinit. Which of
the two solutions is correct I don't know, but I hope to find either one of
those in my unstable updates... :)


Arjan


-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16.1
Locale: LANG=C, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)

Versions of packages xbase-clients depends on:
ii  libc6   2.3.6-6  GNU C Library: Shared libraries
ii  libdmx1 1:1.0.1-2X11 Distributed Multihead extensio
ii  libfontconfig1  2.3.2-5.1generic font configuration library
ii  libfreetype62.1.10-3 FreeType 2 font engine, shared lib
ii  libfs6  2:1.0.0-2X11 Font Services library
ii  libgl1-mesa-glx [libgl1]6.4.1-0.4A free implementation of the OpenG
ii  libice6 1:1.0.0-2X11 Inter-Client Exchange library
ii  libpng12-0  1.2.8rel-5.1 PNG library - runtime
ii  libsm6  1:1.0.0-3X11 Session Management library
ii  libx11-62:1.0.0-5X11 client-side library
ii  libxau6 1:1.0.0-2X11 authorisation library
ii  libxaw7 1:1.0.1-4X11 Athena Widget library
ii  libxcursor1 1.1.5.2-2X cursor management library
ii  libxext61:1.0.0-3X11 miscellaneous extension librar
ii  libxft2 2.1.8.2-6FreeType-based font drawing librar
ii  libxi6  1:1.0.0-3X11 Input extension library
ii  libxinerama11:1.0.1-2X11 Xinerama extension library
ii  libxkbfile1 1:1.0.2-2X11 keyboard file manipulation lib
ii  libxmu6 1:1.0.1-2X11 miscellaneous utility library
ii  libxmuu11:1.0.1-2X11 miscellaneous micro-utility li
ii  libxrandr2  2:1.1.0.2-3  X11 RandR extension library
ii  libxrender1 1:0.9.0.2-2  X Rendering Extension client libra
ii  libxss1 1:1.0.1-3X11 Screen Saver extension library
ii  libxt6  1:1.0.0-3X11 toolkit intrinsics library
ii  libxtrap6   1:1.0.0-2X11 event trapping extension libra
ii  libxtst61:1.0.1-2X11 Testing -- Resource extension 
ii  libxv1  1:1.0.1-2X11 Video extension library
ii  libxxf86dga12:1.0.0-2X11 Direct Graphics Access extensi
ii  libxxf86misc1   1:1.0.0-3X11 XFree86 miscellaneous extensio
ii  libxxf86vm1 1:1.0.0-3X11 XFree86 video mode extension l
ii  x11-common  1:7.0.10 X Window System (X.Org) infrastruc
ii  zlib1g  1:1.2.3-11   compression library - runtime

xbase-clients recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#327102: gnome-games: AisleRiot redraws to blank window at startup

[Arjan Opmeer]

On 2/20/06, Loïc Minier [EMAIL PROTECTED] wrote:
  This is a followup for Debian bug http://bugs.debian.org/327102.
  Do you still get this bug with gnome-games 2.12?  I don't have the bug.

You are right. I also don't have this bug anymore. So I guess this issue has
been fixed with gnome-games 2.12.


Arjan

Bug#327102: gnome-games: AisleRiot redraws to blank window at startup

[Arjan Opmeer]

Package: gnome-games
Version: 1:2.10.1-5.1
Severity: normal


When starting a new game of AisleRiot the window will show the card layout
of the game for a fraction of a second and then redraw to a blank grey
window. Forcing a redraw by resizing the window, clicking on a card
(indicated by the hand shaped pointer) or pressing ctrl-r will restore the
normal view and the game will continue to work as expected. Also immediately
starting a new game will redraw the screen properly.


Arjan

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12.3
Locale: LANG=C, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)

Versions of packages gnome-games depends on:
ii  gnome-games-data  1:2.10.1-5.1   data files for the GNOME games
ii  guile-1.6-libs1.6.7-1.1  Main Guile libraries
ii  libart-2.0-2  2.3.17-1   Library of functions for 2D graphi
ii  libatk1.0-0   1.10.1-2   The ATK accessibility toolkit
ii  libaudiofile0 0.2.6-6Open-source version of SGI's audio
ii  libbonobo2-0  2.10.0-1   Bonobo CORBA interfaces library
ii  libbonoboui2-02.10.0-1   The Bonobo UI library
ii  libc6 2.3.5-6GNU C Library: Shared libraries an
ii  libesd-alsa0 [libesd0]0.2.36-1   Enlightened Sound Daemon (ALSA) - 
ii  libgcc1   1:4.0.1-6  GCC support library
ii  libgconf2-4   2.10.1-1   GNOME configuration database syste
ii  libglade2-0   1:2.5.1-2  library to load .glade files at ru
ii  libglib2.0-0  2.8.0-1The GLib library of C routines
ii  libgnome2-0   2.10.1-1   The GNOME 2 library - runtime file
ii  libgnomecanvas2-0 2.10.2-2   A powerful object-oriented display
ii  libgnomeui-0  2.10.1-1   The GNOME 2 libraries (User Interf
ii  libgnomevfs2-02.10.1-5   The GNOME virtual file-system libr
ii  libgtk2.0-0   2.6.10-1   The GTK+ graphical user interface 
ii  libguile-ltdl-1   1.6.7-1.1  Guile's patched version of libtool
ii  libice6   6.8.2.dfsg.1-6 Inter-Client Exchange library
ii  liborbit2 1:2.12.2-3 libraries for ORBit2 - a CORBA ORB
ii  libpango1.0-0 1.8.2-1Layout and rendering of internatio
ii  libpopt0  1.7-5  lib for parsing cmdline parameters
ii  libqthreads-121.6.7-1.1  QuickThreads library for Guile
ii  librsvg2-22.9.5-4SAX-based renderer library for SVG
ii  libsm66.8.2.dfsg.1-6 X Window System Session Management
ii  libstdc++64.0.1-6The GNU Standard C++ Library v3
ii  libxml2   2.6.20-1   GNOME XML library
ii  xlibs 6.8.2.dfsg.1-6 X Window System client libraries m
ii  zlib1g1:1.2.3-4  compression library - runtime

Versions of packages gnome-games recommends:
pn  gnome-games-extra-datanone (no description available)
ii  python2.3.5-3An interactive high-level object-o

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]