Bug#832365: [dispcalgui] Segmentation fault after the first test

2016-07-24 Thread Danielsan 
Package: dispcalgui
Version: 3.1.4.0-dmo1
Severity: important

--- Please enter the report below this line. ---

Dear Maintainer I would like to report the program goes in segmentation
fault after the first cycle (nine steps color). No other information
were displayed:

*log from console*

displaycal 3.1.4.0 2016-07-10T23:58:02.896555Z
debian stretch/sid  x86_64
Python 2.7.12 (default, Jun 29 2016, 08:18:26) 
[GCC 5.4.0 20160609]
wxPython 3.0.2.0 gtk2 (classic)
Encoding: UTF-8
File system encoding: UTF-8
Connection to 127.0.0.1:15411 failed: [Errno 111] Connection refused
Starting up...
Audio module: wx 3.0.2.0
Enumerating display devices and communication ports...
/usr/bin
Argyll CMS 1.8.3
...ok.
Checking video card gamma table access for display 1...
Verify: 'test.cal' IS loaded (discrepancy 0.0%)
...ok.
Initializing GUI...

...ok.
Ready.
Setting up scripting host at 127.0.0.1:15411
Check for application update...
DisplayCAL is up-to-date.
Argyll CMS is up-to-date.

Calibrate & profile

Session log: LP173WF4-SPD1 #1 2016-07-24 12-50 2.2 F-S XYZLUT+MTX.log

Working directory:
  /
   tmp/
DisplayCAL-g6G0T3/

Command line:
  dispcal
-v2
-d1
-c1
-yl
-P0.485587583149,0.397660818713,1.5
-ql
-t
-g2.2
-f1.0
-k0.0
-A4.0
-b
'LP173WF4-SPD1 #1 2016-07-24 12-50 2.2 F-S XYZLUT+MTX'

DisplayCAL: Starting interaction with subprocess
Argyll 'V1.8.3' Build 'Linux 64 bit' System 'Linux #1 SMP Debian
4.6.4-1 (2016-07-18) 4.6.0-1-amd64 x86_64' Setting up the instrument
Place instrument on test window.
DisplayCAL: Waiting for send buffer
DisplayCAL: Sending buffer: ' '
Hit Esc or Q to give up, any other key to continue:
Display type is 'l'
Target white = native white point
Target white brightness = native brightness
Target black brightness = native brightness
Black point device hack is enabled
Target advertised gamma = 2.20

Display adjustment menu:
Press 1 .. 7
1) Black level (CRT: Offset/Brightness)
2) White point (Color temperature, R,G,B, Gain/Contrast)
3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight)
4) Black point (R,G,B, Offset/Brightness)
5) Check all
6) Measure and set ambient for viewing condition adjustment
7) Continue on to calibration
8) Exit
DisplayCAL: Waiting for send buffer
DisplayCAL: Sending buffer: '3'
Doing some initial measurements
White = XYZ 145.875 318.775 204.001

Adjust CRT Contrast or LCD Brightness to desired level. Press space
when done. Initial 318.78
DisplayCAL: Sending buffer: ' '
/ Current 318.77

Press 1 .. 7
1) Black level (CRT: Offset/Brightness)
2) White point (Color temperature, R,G,B, Gain/Contrast)
3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight)
4) Black point (R,G,B, Offset/Brightness)
5) Check all
6) Measure and set ambient for viewing condition adjustment
7) Continue on to calibration
8) Exit
DisplayCAL: Waiting for send buffer
DisplayCAL: Sending buffer: '7'
Commencing display calibration
Patch 9 of 9
Black = XYZ 0.1940 0.3529 0.4488
Red   = XYZ 57.133 64.779  1.762
Green = XYZ 55.394 232.399  6.010
Blue  = XYZ 33.218 21.417 196.147
White = XYZ 145.817 318.710 203.938
Segmentation fault

*log from displayca.log*

2016-07-24 12:50:21,905

2016-07-24 12:50:21,906 displaycal 3.1.4.0 2016-07-10T23:58:02.896555Z
2016-07-24 12:50:21,908 debian stretch/sid  x86_64 2016-07-24
12:50:21,908 Python 2.7.12 (default, Jun 29 2016, 08:18:26) 2016-07-24
12:50:21,908 [GCC 5.4.0 20160609] 2016-07-24 12:50:21,908 wxPython
3.0.2.0 gtk2 (classic) 2016-07-24 12:50:21,908 Encoding: UTF-8
2016-07-24 12:50:21,908 File system encoding: UTF-8
2016-07-24 12:50:21,909 Connection to 127.0.0.1:15411 failed: [Errno
111] Connection refused 2016-07-24 12:50:22,009 Starting up...
2016-07-24 12:50:22,083 Audio module: wx 3.0.2.0
2016-07-24 12:50:23,481 Enumerating display devices and communication
ports... 2016-07-24 12:50:23,484 /usr/bin
2016-07-24 12:50:24,905 Argyll CMS 1.8.3
2016-07-24 12:50:24,907 ...ok.
2016-07-24 12:50:24,916 Checking video card gamma table access for
display 1... 2016-07-24 12:50:24,948 Verify: 'test.cal' IS loaded
(discrepancy 0.0%) 2016-07-24 12:50:24,956 ...ok.
2016-07-24 12:50:24,956 Initializing GUI...
2016-07-24 12:50:25,007 
2016-07-24 12:50:25,542 ...ok.
2016-07-24 12:50:25,544 Ready.
2016-07-24 12:50:25,742 Setting up scripting host at 127.0.0.1:15411
2016-07-24 12:50:25,794 Check for application update...
2016-07-24 12:50:26,250 DisplayCAL is up-to-date.
2016-07-24 12:50:26,896 Argyll CMS is up-to-date.
2016-07-24 12:50:30,955

2016-07-24 12:50:30,956 Calibrate & profile 2016-07-24 12:50:31,528

Bug#778922: installation-reports: Installer hangs during partition formatting

2015-08-13 Thread Danielsan 
Package: installation-reports
Followup-For: Bug #778922

Dear Maintainer,

-- Package-specific info:

Boot method: HDD USB
Image version: I installed from the iso image 
debian-8.1.0-amd64-xfce-CD-1.iso, downloaded via a bittorrent program by the 
torrent debian-8.1.0-amd64-xfce-CD-1.iso. available at cdimage.debian.org
Date: 11 August 2015

Machine: Acer Aspire ONE 721
Partitions: 
fdisk -l output

Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000c06aa

Device Boot Start   End   Sectors  Size Id Type
/dev/sda1  * 2048 204802047 20480 97.7G  b W95 FAT32
/dev/sda2   204812746 411703295 206890550 98.7G  5 Extended
/dev/sda5   204812748 213214679   84019324G 82 Linux swap / Solaris
/dev/sda6   213214743 234195569  20980827   10G 83 Linux
/dev/sda7   234195633 250983494  167878628G 83 Linux
/dev/sda8   250983558 267642899  166593428G 83 Linux
/dev/sda9   267646976 288659455  21012480   10G 83 Linux
/dev/sda10  288661504 304410623  15749120  7.5G 83 Linux
/dev/sda11  401403904 411703295  10299392  4.9G 83 Linux
---

df -Tl output:

Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda10 ext4   7619708  2677204   4532392  38% /
udev   devtmpfs 102400 10240   0% /dev
tmpfs  tmpfs   760004 8916751088   2% /run
tmpfs  tmpfs  1940   194   0% /dev/shm
tmpfs  tmpfs 51204  5116   1% /run/lock
tmpfs  tmpfs  1940   194   0% /sys/fs/cgroup
tmpfs  tmpfs   380004438   1% /run/user/109
tmpfs  tmpfs   380004   12379992   1% /run/user/1000



Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:   [O]
Detect network card:[O]
Configure network:  [ ]
Detect CD:  [O]
Load installer modules: [O]
Clock/timezone setup:   [O]
User/password setup:[O]
Detect hard drives: [O]
Partition hard drives:  [ ]
Install base system:[O]
Install tasks:  [ ]
Install boot loader:[O]
Overall install:[O]

Comments/Problems:

When the time for choosing the partition to install the system came, I selected
a logical partition (/dev/sda10) on which previously I had Debian 7.8.
The partition (/dev/sda10) was already formatted as ext4 but I wanted its
content to vanish, therefore I formatted the partition again as ext4.

Right after selecting write changes to disk the installer froze. The progress
bar was at some 30% and kept like that. The installer didn't respond.
This happened 5 times.

Eventually I managed to install Debian 8.1.0 on /dev/sda10 just by formatting
the mentioned partition with Gparted from another OS and not asking the
installer to format it. The installation process went fine.



In case it matters, I have Kubuntu 14.04.02 on /dev/sda7, Debian jessie 8.1 on
/dev/sda8, Trisquel Belenos 7.0 on /dev/sda9 and Haiku-OS (a BeOS-like) on
/dev/sda11. Hence I installed the bootloader, during the installation process,
on /dev/sda10 since I manage grub from Kubuntu.

I installed the whole system on /dev/sda10.

-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to sub...@bugs.debian.org.

==
Installer lsb-release:
==
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION=Debian GNU/Linux installer
DISTRIB_RELEASE=8 (jessie) - installer build 20150422+deb8u1
X_INSTALLATION_MEDIUM=cdrom

==
Installer hardware-summary:
==
uname -a: Linux DanielDebianPackager 3.16.0-4-amd64 #1 SMP Debian 
3.16.7-ckt11-1 (2015-05-24) x86_64 GNU/Linux
lspci -knn: 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] 
RS880 Host Bridge [1022:9601]
lspci -knn: Subsystem: Acer Incorporated [ALI] Device [1025:0429]
lspci -knn: 00:01.0 PCI bridge [0604]: Acer Incorporated [ALI] AMD RS780/RS880 
PCI to PCI bridge (int gfx) [1025:9602]
lspci -knn: 00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 
RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604]
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 
RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605]
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. 
[AMD/ATI]

Bug#736270: docky: Docky crash after a while

2014-03-31 Thread Danielsan 
Package: docky
Version: 2.2.0-2
Followup-For: Bug #736270

Dear Maintainer,

in addiction I want report Docky is still continuing to crash with FGLRX and
now with Radeon and Mesa 10.

My current video driver:

$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
[...]
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
[...]
GLX version: 1.4
[...]
OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD PALM
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.1.0
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
[...]
OpenGL version string: 3.0 Mesa 10.1.0
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
[...]
240 GLX Visuals
visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav
  id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat
[...]
360 GLXFBConfigs:
visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav
  id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat
[...]


That is my apu:

 cat /proc/cpuinfo
processor   : 0
vendor_id   : AuthenticAMD
cpu family  : 20
model   : 2
model name  : AMD E-450 APU with Radeon(tm) HD Graphics
stepping: 0
microcode   : 0x5000119
cpu MHz : 1650.000
cache size  : 512 KB
physical id : 0
siblings: 2
core id : 0
cpu cores   : 2
apicid  : 0
initial apicid  : 0
fpu : yes
fpu_exception   : yes
cpuid level : 6
wp  : yes
flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni
monitor ssse3 cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a
misalignsse 3dnowprefetch ibs skinit wdt arat hw_pstate npt lbrv svm_lock
nrip_save pausefilter
bogomips: 3292.63
TLB size: 1024 4K pages
clflush size: 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor   : 1
vendor_id   : AuthenticAMD
cpu family  : 20
model   : 2
model name  : AMD E-450 APU with Radeon(tm) HD Graphics
stepping: 0
microcode   : 0x5000119
cpu MHz : 825.000
cache size  : 512 KB
physical id : 0
siblings: 2
core id : 1
cpu cores   : 2
apicid  : 1
initial apicid  : 1
fpu : yes
fpu_exception   : yes
cpuid level : 6
wp  : yes
flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni
monitor ssse3 cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a
misalignsse 3dnowprefetch ibs skinit wdt arat hw_pstate npt lbrv svm_lock
nrip_save pausefilter
bogomips: 3292.63
TLB size: 1024 4K pages
clflush size: 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate





-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (990, 'testing'), (600, 'unstable'), (50, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.13-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages docky depends on:
ii  gconf2  3.2.6-2
ii  libc6   2.18-4
ii  libdbus-glib2.0-cil 0.6.0-1
ii  libdbus2.0-cil  0.8.0-1
ii  libgconf2.0-cil 2.24.2-3
ii  libglib2.0-02.38.2-5
ii  libglib2.0-cil  2.12.10-5
ii  libgnome-keyring1.0-cil 1.0.0-4
ii  libgnomedesktop2.20-cil 2.26.0-8
ii  libgtk2.0-0 2.24.22-1
ii  libgtk2.0-cil   2.12.10-5
ii  libmono-addins0.2-cil   1.0+git20130406.adcd75b-3
ii  libmono-cairo4.0-cil3.0.6+dfsg2-11
ii  libmono-corlib4.5-cil   3.0.6+dfsg2-11
ii  libmono-posix4.0-cil3.0.6+dfsg2-11
ii  libmono-sharpzip4.84-cil3.0.6+dfsg2-11
ii  libmono-system-core4.0-cil  3.0.6+dfsg2-11
ii  libmono-system-web4.0-cil   3.0.6+dfsg2-11
ii  libmono-system-xml-linq4.0-cil  3.0.6+dfsg2-11
ii  libmono-system-xml4.0-cil   3.0.6+dfsg2-11
ii  libmono-system4.0-cil   3.0.6+dfsg2-11
ii  libnotify0.4-cil0.4.0~r3032-7
ii  librsvg2-2.18-cil   2.26.0-8
ii  librsvg2-common 2.40.2-1
ii  libwnck2.20-cil 2.26.0-8
ii

Bug#742743: lightdm-gtk-greeter: Change the text en-US.utf8 in the login screen with a real name of the languages

2014-03-26 Thread Danielsan 
Package: lightdm-gtk-greeter
Version: 1.8.2-1
Severity: minor
Tags: l10n

Dear Maintainer,

I'm sorry because I'm going to complain, but I don't understand why in the top
corner on the right side of the login greeter I read en-US.utf8 instead of
English. And if I use an other language I will read, for example, it-IT.utf8.

It's strange, I'm not speaking or writing in en-US.utf8 and neither in it-
IT.utf8. I speak and write in English and maybe in Italian, French or Spanish.

It's a stupid thing but not so stupid if you don't know what it means. Not all
the people which use Debian are coders or IT technicians. I think that is a
little thing but with a big collateral effect those to ward off the people from
informatics because it creates a sense of inadequacy.

Best regards,
Daniel



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (990, 'testing'), (600, 'unstable'), (50, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.13-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages lightdm-gtk-greeter depends on:
ii  libc6   2.18-4
ii  libcairo2   1.12.16-2
ii  libgdk-pixbuf2.0-0  2.30.6-1
ii  libglib2.0-02.38.2-5
ii  libgtk-3-0  3.10.7-1
ii  liblightdm-gobject-1-0  1.8.8-1
ii  libx11-62:1.6.2-1

Versions of packages lightdm-gtk-greeter recommends:
ii  desktop-base   7.0.3
ii  gnome-icon-theme-symbolic  3.10.1-1
ii  gnome-themes-standard  3.10.0-2
ii  policykit-10.105-4

lightdm-gtk-greeter suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#703289: docky: In vertical position the last docklet icon is not recognized by mouse

2014-01-22 Thread Danielsan 
Package: docky
Version: 2.2.0-2
Followup-For: Bug #703289

I found the cause of this problem.

The problem is the switcher docklet, when it is in vertical position it should
look like a square but often it is look like a rectangle, which is the shape in
the horizontal position, when is as a rectangle the mouse is unable to click
the docklet below.

I already reported this bug directly in the Docky bug tracker.

D.



-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (990, 'testing'), (600, 'unstable'), (50, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.12-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages docky depends on:
ii  gconf2  3.2.6-1
ii  libc6   2.17-97
ii  libdbus-glib2.0-cil 0.6.0-1
ii  libdbus2.0-cil  0.8.0-1
ii  libgconf2.0-cil 2.24.2-3
ii  libglib2.0-02.36.4-1
ii  libglib2.0-cil  2.12.10-5
ii  libgnome-keyring1.0-cil 1.0.0-4
ii  libgnomedesktop2.20-cil 2.26.0-8
ii  libgtk2.0-0 2.24.22-1
ii  libgtk2.0-cil   2.12.10-5
ii  libmono-addins0.2-cil   1.0+git20130406.adcd75b-3
ii  libmono-cairo4.0-cil3.0.6+dfsg2-10
ii  libmono-corlib4.5-cil   3.0.6+dfsg2-10
ii  libmono-posix4.0-cil3.0.6+dfsg2-10
ii  libmono-sharpzip4.84-cil3.0.6+dfsg2-10
ii  libmono-system-core4.0-cil  3.0.6+dfsg2-10
ii  libmono-system-web4.0-cil   3.0.6+dfsg2-10
ii  libmono-system-xml-linq4.0-cil  3.0.6+dfsg2-10
ii  libmono-system-xml4.0-cil   3.0.6+dfsg2-10
ii  libmono-system4.0-cil   3.0.6+dfsg2-10
ii  libnotify0.4-cil0.4.0~r3032-7
ii  librsvg2-2.18-cil   2.26.0-8
ii  librsvg2-common 2.40.0-1
ii  libwnck2.20-cil 2.26.0-8
ii  libx11-62:1.6.2-1
ii  mono-runtime3.0.6+dfsg2-10

Versions of packages docky recommends:
pn  dockmanager  none

docky suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#736270: docky: Docky crash after a while

2014-01-21 Thread Danielsan 
Package: docky
Version: 2.2.0-2
Severity: important

Dear Maintainer,

Docky crash after few time when is launched.
I'm using XFCE 4.10 and fglrx-driver 1:13.12-3

I report the bug crash print from the terminal:

$ docky
[Info  11:41:21.949] Docky version: 2.2.0 Release
[Info  11:41:21.979] Kernel version: 3.12.1.64
[Info  11:41:22.021] CLR version: 4.0.30319.17020
[Error 11:41:22.753] [SystemService] Could not initialize power manager dbus:
'org.freedesktop.DBus.Error.UnknownMethod: Method Get with signature ss on
interface org.freedesktop.UPower doesn't exist
'
[Info  11:41:22.758] [SystemService]   at
Docky.Services.SystemService+IUPowerProxy.Get (System.String interface,
System.String propname) [0x0] in filename unknown:0
  at Docky.Services.SystemService.HandleUPowerChanged () [0x0] in filename
unknown:0
  at Docky.Services.SystemService.InitializeBattery () [0x0] in filename
unknown:0
[Info  11:41:22.795] [ThemeService] Setting theme: Classic
[Info  11:41:24.262] [DockServices] Dock services initialized.
[Info  11:41:25.887] [PluginManager] Loaded CPU Monitor.
[Info  11:41:25.888] [PluginManager] Loaded Desktop.
[Info  11:41:25.922] [PluginManager] Loaded Mounter.
[Info  11:41:25.922] [PluginManager] Loaded Trash.
[Info  11:41:26.063] [PluginManager] Loaded Docky.Widgets,1.0.
[Info  11:41:26.063] [PluginManager] Loaded Weather.

(process:19398): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size
== 0' failed
2014-01-21 11:49:29 autosyncActivities  ERROR   OnDownloadError:
Speciali of antonucci.d...@gmail.com


(process:19398): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size
== 0' failed

(process:19398): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size
== 0' failed

(process:19398): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size
== 0' failed

Unhandled Exception:
System.Reflection.TargetInvocationException: Exception has been thrown by the
target of an invocation. --- System.Exception:
org.freedesktop.DBus.Error.UnknownMethod: Method Get with signature ss on
interface org.freedesktop.UPower doesn't exist

  at Docky.Services.SystemService+IUPowerProxy.Get (System.String interface,
System.String propname) [0x0] in filename unknown:0
  at Docky.Services.SystemService.HandleUPowerChanged () [0x0] in filename
unknown:0
  at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke
(System.Reflection.MonoMethod,object,object[],System.Exception)
  at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags
invokeAttr, System.Reflection.Binder binder, System.Object[] parameters,
System.Globalization.CultureInfo culture) [0x0] in filename unknown:0
  --- End of inner exception stack trace ---
at System.Reflection.MonoMethod.Invoke
(object,System.Reflection.BindingFlags,System.Reflection.Binder,object[],System.Globalization.CultureInfo)
0x0012b
at System.Reflection.MethodBase.Invoke (object,object[]) 0x0002a
at System.Delegate.DynamicInvokeImpl (object[]) 0x001c7
at System.MulticastDelegate.DynamicInvokeImpl (object[]) 0x0003b
at System.Delegate.DynamicInvoke (object[]) 0x00018
at DBus.Connection.HandleSignal (DBus.Protocol.Message) 0x00323
at DBus.Connection.DispatchSignals () 0x0005f
at DBus.Connection.Iterate () 0x0002f
at DBus.BusG/Initc__AnonStorey0.m__0 (intptr,DBus.GLib.IOCondition,intptr)
0x00043
at (wrapper native-to-managed) DBus.BusG/Initc__AnonStorey0.m__0
(intptr,DBus.GLib.IOCondition,intptr) 0x0008f
at (wrapper managed-to-native) Gtk.Application.gtk_main () 0x00054
at Gtk.Application.Run () 0xb
at Docky.Docky.Main (string[]) 0x004a7

[ERROR] FATAL UNHANDLED EXCEPTION: System.Reflection.TargetInvocationException:
Exception has been thrown by the target of an invocation. ---
System.Exception: org.freedesktop.DBus.Error.UnknownMethod: Method Get with
signature ss on interface org.freedesktop.UPower doesn't exist

  at Docky.Services.SystemService+IUPowerProxy.Get (System.String interface,
System.String propname) [0x0] in filename unknown:0
  at Docky.Services.SystemService.HandleUPowerChanged () [0x0] in filename
unknown:0
  at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke
(System.Reflection.MonoMethod,object,object[],System.Exception)
  at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags
invokeAttr, System.Reflection.Binder binder, System.Object[] parameters,
System.Globalization.CultureInfo culture) [0x0] in filename unknown:0
  --- End of inner exception stack trace ---
at System.Reflection.MonoMethod.Invoke
(object,System.Reflection.BindingFlags,System.Reflection.Binder,object[],System.Globalization.CultureInfo)
0x0012b
at System.Reflection.MethodBase.Invoke (object,object[]) 0x0002a
at System.Delegate.DynamicInvokeImpl (object[]) 0x001c7
at System.MulticastDelegate.DynamicInvokeImpl (object[]) 0x0003b
at System.Delegate.DynamicInvoke (object[]) 0x00018
at DBus.Connection.HandleSignal (DBus.Protocol.Message) 0x00323
at

Bug#727228: linux-image-3.11-1-amd64: Nothing resume after hibernation on Laptop HP 635

2013-10-23 Thread Danielsan 
Package: src:linux
Version: 3.11.5-1
Severity: important

Dear Maintainer,

I report the hibernation doesn't resume Jessie on my laptop HP 635

Before to report this bug I tried to launch the kernel without any particular
setting to understand if the activation of DPM could cause problem, but the
resume doesn't work, so I had a black screen.

I'm currently using Debian Jessie, XFCE as D.E. and using the open video driver
radeon.


dmesg | grep PM:
[0.00] PM: Registered nosave memory: [mem 0x0009f000-0x0009]
[0.00] PM: Registered nosave memory: [mem 0x000a-0x000d]
[0.00] PM: Registered nosave memory: [mem 0x000e-0x000f]
[0.00] PM: Registered nosave memory: [mem 0xdfb3f000-0xdfbbefff]
[0.00] PM: Registered nosave memory: [mem 0xdfbbf000-0xdfebefff]
[0.00] PM: Registered nosave memory: [mem 0xdfebf000-0xdfef4fff]
[0.00] PM: Registered nosave memory: [mem 0xdff0-0xdfff]
[0.00] PM: Registered nosave memory: [mem 0xe000-0xf7ff]
[0.00] PM: Registered nosave memory: [mem 0xf800-0xfbff]
[0.00] PM: Registered nosave memory: [mem 0xfc00-0xfebf]
[0.00] PM: Registered nosave memory: [mem 0xfec0-0xfec00fff]
[0.00] PM: Registered nosave memory: [mem 0xfec01000-0xfec0]
[0.00] PM: Registered nosave memory: [mem 0xfec1-0xfec10fff]
[0.00] PM: Registered nosave memory: [mem 0xfec11000-0xfedf]
[0.00] PM: Registered nosave memory: [mem 0xfee0-0xfee00fff]
[0.00] PM: Registered nosave memory: [mem 0xfee01000-0xffdf]
[0.00] PM: Registered nosave memory: [mem 0xffe0-0x]
[0.197550] PM: Registering ACPI NVS region [mem 0xdfbbf000-0xdfebefff]
(3145728 bytes)
[1.823952] PM: Hibernation image not present or could not be loaded.
[3.756687] PM: Starting manual resume from disk
[3.756698] PM: Hibernation image partition 8:6 present
[3.756701] PM: Looking for hibernation image.
[3.757265] PM: Image not found (code -22)
[3.757273] PM: Hibernation image not present or could not be loaded.

Thanks
D.



-- Package-specific info:
** Version:
Linux version 3.11-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.1 
(Debian 4.8.1-10) ) #1 SMP Debian 3.11.5-1 (2013-10-17)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.11-1-amd64 
root=UUID=4a47055a-2f1b-4085-9aed-06235b423ae1 ro quiet acpi_backlight=vendor 
radeon.dpm=1

** Not tainted

** Kernel log:
[   21.175921] RPC: Registered udp transport module.
[   21.175924] RPC: Registered tcp transport module.
[   21.175927] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   21.226933] FS-Cache: Loaded
[   21.283865] FS-Cache: Netfs 'nfs' registered for caching
[   21.364891] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[   24.781108] input: ACPI Virtual Keyboard Device as 
/devices/virtual/input/input13
[   33.736565] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 
(bits) (20130517/dsopcode-236)
[   33.736583] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] 
(Node 8801800a6d58), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[   33.736604] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] 
(Node 8801800a8510), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[   33.891310] r8169 :06:00.0: firmware: agent loaded rtl_nic/rtl8105e-1.fw 
into memory
[   34.067514] r8169 :06:00.0 eth0: link down
[   34.068222] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   34.090419] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   36.677588] wlan0: authenticate with 74:9d:dc:98:7a:11
[   36.699106] wlan0: send auth to 74:9d:dc:98:7a:11 (try 1/3)
[   36.703794] wlan0: authenticated
[   36.704381] ath9k :07:00.0 wlan0: disabling HT as WMM/QoS is not 
supported by the AP
[   36.704396] ath9k :07:00.0 wlan0: disabling VHT as WMM/QoS is not 
supported by the AP
[   36.708578] wlan0: associate with 74:9d:dc:98:7a:11 (try 1/3)
[   36.712077] wlan0: RX AssocResp from 74:9d:dc:98:7a:11 (capab=0x431 status=0 
aid=1)
[   36.712925] wlan0: associated
[   36.713041] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   36.713267] cfg80211: Calling CRDA for country: US
[   36.730659] ath: regdomain 0x8348 updated by CountryIE
[   36.730674] ath: EEPROM regdomain: 0x8348
[   36.730680] ath: EEPROM indicates we should expect a country code
[   36.730688] ath: doing EEPROM country-regdmn map search
[   36.730694] ath: country maps to regdmn code: 0x3a
[   36.730700] ath: Country alpha2 being used: US
[   36.730705] ath: Regpair used: 0x3a
[   36.730806] cfg80211: Regulatory domain changed to country: US
[   36.730814] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp)
[   36.730822] cfg80211:   (2402000 KHz - 2472000 KHz @ 4 KHz), (300 mBi, 
2700 mBm)
[   36.730830] cfg80211:   (517 KHz - 525 KHz @ 4 KHz), (300 mBi, 
1700 mBm)
[   36.730837]

Bug#721728: linphone: Black video window (but video actually works)

2013-10-05 Thread Danielsan 
Package: linphone
Version: 3.6.1-2.1+b1
Followup-For: Bug #721728

I confirm the same behavior for me.

I upgraded to Linphone 3.6 from Linphone 3.5 and selfvideo doesn't show my
image from the webcam only a black screen. I'm using XFCE4 4.10 as DE.

My video driver:

fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 6320 Graphics
OpenGL version string: 4.2.12217 Compatibility Profile Context 12.104


My Webcam:

usb 2-2: Product: HP Webcam-101
usb 2-2: Manufacturer: HP Webcam-101
usb 2-2: SerialNumber: HP Webcam-101
uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e)
input: HP Webcam-101 as
/devices/pci:00/:00:16.2/usb2/2-2/2-2:1.0/input/input15


Linphone Console Debug Video Output:

message: Setting video size 320x240
message: Driver is uvcvideo
message: v4l2: trying 320x240
message: v4lv2: YUV420P chosen
message: Size of webcam delivered pictures is 320x240
error: no such method on filter MSGLXVideo, fid=16387 method index=1
message: ms_filter_link: MSV4L2Capture:0x22ee550,0--MSPixConv:0x1f4bd20,0
message: ms_filter_link: MSPixConv:0x1f4bd20,0--MSGLXVideo:0x22f5170,0
message: Video MSTicker priority left to normal.
message: msv4l2_thread starting
message: V4L2 video capture started.
message: Getting matching framebuffer configs
message: Found 18 matching FB configs.
message: Getting XVisualInfos
message:   Matching fbconfig 0, visual ID 0x41: SAMPLE_BUFFERS = 0, SAMPLES = 0
message:   Matching fbconfig 1, visual ID 0x49: SAMPLE_BUFFERS = 1, SAMPLES = 2
message:   Matching fbconfig 2, visual ID 0x57: SAMPLE_BUFFERS = 1, SAMPLES = 4
message:   Matching fbconfig 3, visual ID 0x37: SAMPLE_BUFFERS = 0, SAMPLES = 0
message:   Matching fbconfig 4, visual ID 0x45: SAMPLE_BUFFERS = 0, SAMPLES = 0
message:   Matching fbconfig 5, visual ID 0x53: SAMPLE_BUFFERS = 0, SAMPLES = 0
message:   Matching fbconfig 6, visual ID 0x61: SAMPLE_BUFFERS = 0, SAMPLES = 0
message:   Matching fbconfig 7, visual ID 0x69: SAMPLE_BUFFERS = 0, SAMPLES = 0
message:   Matching fbconfig 8, visual ID 0x39: SAMPLE_BUFFERS = 0, SAMPLES = 0
message:   Matching fbconfig 9, visual ID 0x47: SAMPLE_BUFFERS = 1, SAMPLES = 2
message:   Matching fbconfig 10, visual ID 0x55: SAMPLE_BUFFERS = 1, SAMPLES =
4
message:   Matching fbconfig 11, visual ID 0x35: SAMPLE_BUFFERS = 0, SAMPLES =
0
message:   Matching fbconfig 12, visual ID 0x43: SAMPLE_BUFFERS = 0, SAMPLES =
0
message:   Matching fbconfig 13, visual ID 0x51: SAMPLE_BUFFERS = 0, SAMPLES =
0
message:   Matching fbconfig 14, visual ID 0x59: SAMPLE_BUFFERS = 0, SAMPLES =
0
message:   Matching fbconfig 15, visual ID 0x67: SAMPLE_BUFFERS = 0, SAMPLES =
0
message:   Matching fbconfig 16, visual ID 0x164: SAMPLE_BUFFERS = 0, SAMPLES =
0
message:   Matching fbconfig 17, visual ID 0x164: SAMPLE_BUFFERS = 0, SAMPLES =
0
message: Chosen visual ID = 0x57
message: Creating colormap
message: Creating window
message: Mapping window
message: ogl_display_new : 0x273baf0

message: init opengles_display (320 x 240, gl initialized:0)
message: resize opengles_display (320 x 240, gl initialized:0)
message: OpenGL version string: 4.2.12217 Compatibility Profile Context 12.104
message: OpenGL extensions: GL_AMDX_debug_output
GL_AMDX_vertex_shader_tessellator GL_AMD_conservative_depth GL_AMD_debug_output
GL_AMD_depth_clamp_separate GL_AMD_draw_buffers_blend
GL_AMD_multi_draw_indirect GL_AMD_name_gen_delete GL_AMD_performance_monitor
GL_AMD_pinned_memory GL_AMD_query_buffer_object GL_AMD_sample_positions
GL_AMD_seamless_cubemap_per_texture GL_AMD_shader_stencil_export
GL_AMD_shader_trace GL_AMD_texture_cube_map_array GL_AMD_texture_texture4
GL_AMD_transform_feedback3_lines_triangles GL_AMD_vertex_shader_layer
GL_AMD_vertex_shader_tessellator GL_AMD_vertex_shader_viewport_index
GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_arrays_of_arrays
GL_ARB_base_instance GL_ARB_blend_func_extended GL_ARB_clear_buffer_object
GL_ARB_color_buffer_float GL_ARB_compatibility
GL_ARB_compressed_texture_pixel_storage GL_ARB_compute_shader
GL_ARB_conservative_depth GL_ARB_copy_buffer GL_ARB_depth_buffer_float
GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers
GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_draw_indirect
GL_ARB_draw_instanced GL_ARB_explicit_attrib_location
GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions
GL_ARB_fragment_layer_viewport GL_ARB_fragment_program
GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object
GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary
GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_half_float_pixel
GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_instanced_arrays
GL_ARB_internalformat_query GL_ARB_invalidate_subdata
GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_draw_indirect
GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query
GL_ARB_occlusion_query2 GL_ARB_pixel_buffer_object

Bug#721372: emerillon: It doesn't work: The OpenGL version could not be determined

2013-08-30 Thread Danielsan 
Package: emerillon
Version: 0.1.90-1+b2
Severity: normal

Dear Maintainer,
I'm triying to start emerillon but after several updates It doesn't work and I
have this output on my terminal:

(emerillon:22286): GLib-CRITICAL **: g_strsplit: assertion `string != NULL'
failed
The OpenGL version could not be determined

It's weird because I'm sure I've opengl correctly working:

$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: ATI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
client glx vendor string: ATI
client glx version string: 1.4
client glx extensions:
GLX_ARB_create_context, GLX_ARB_create_context_profile,
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_swap_control, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_MESA_allocate_memory, GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_NV_swap_group, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_swap_barrier, GLX_SGIX_swap_group, GLX_SGIX_visual_select_group,
GLX_EXT_texture_from_pixmap, GLX_EXT_framebuffer_sRGB,
GLX_ARB_fbconfig_float, GLX_AMD_gpu_association
GLX version: 1.4
GLX extensions:
GLX_ARB_create_context, GLX_ARB_create_context_profile,
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_swap_control, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_MESA_swap_control, GLX_NV_swap_group, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_swap_barrier, GLX_SGIX_swap_group, GLX_SGIX_visual_select_group,
GLX_EXT_texture_from_pixmap
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 6320 Graphics
OpenGL version string: 4.2.12217 Compatibility Profile Context 12.104
OpenGL shading language version string: 4.20
OpenGL extensions:
GL_AMDX_debug_output, GL_AMDX_vertex_shader_tessellator,
GL_AMD_conservative_depth, GL_AMD_debug_output,
GL_AMD_depth_clamp_separate, GL_AMD_draw_buffers_blend,
GL_AMD_multi_draw_indirect, GL_AMD_name_gen_delete,
GL_AMD_performance_monitor, GL_AMD_pinned_memory,
GL_AMD_query_buffer_object, GL_AMD_sample_positions,
GL_AMD_seamless_cubemap_per_texture, GL_AMD_shader_stencil_export,
GL_AMD_shader_trace, GL_AMD_texture_cube_map_array,
GL_AMD_texture_texture4, GL_AMD_transform_feedback3_lines_triangles,
GL_AMD_vertex_shader_layer, GL_AMD_vertex_shader_tessellator,
GL_AMD_vertex_shader_viewport_index, GL_ARB_ES2_compatibility,
GL_ARB_ES3_compatibility, GL_ARB_arrays_of_arrays, GL_ARB_base_instance,
GL_ARB_blend_func_extended, GL_ARB_clear_buffer_object,
GL_ARB_color_buffer_float, GL_ARB_compatibility,
GL_ARB_compressed_texture_pixel_storage, GL_ARB_compute_shader,
GL_ARB_conservative_depth, GL_ARB_copy_buffer, GL_ARB_depth_buffer_float,
GL_ARB_depth_clamp, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_buffers_blend, GL_ARB_draw_elements_base_vertex,
GL_ARB_draw_indirect, GL_ARB_draw_instanced,
GL_ARB_explicit_attrib_location, GL_ARB_explicit_uniform_location,
GL_ARB_fragment_coord_conventions, GL_ARB_fragment_layer_viewport,
GL_ARB_fragment_program, GL_ARB_fragment_program_shadow,
GL_ARB_fragment_shader, GL_ARB_framebuffer_object,
GL_ARB_framebuffer_sRGB, GL_ARB_geometry_shader4,
GL_ARB_get_program_binary, GL_ARB_gpu_shader5, GL_ARB_gpu_shader_fp64,
GL_ARB_half_float_pixel, GL_ARB_half_float_vertex, GL_ARB_imaging,
GL_ARB_instanced_arrays, GL_ARB_internalformat_query,
GL_ARB_invalidate_subdata, GL_ARB_map_buffer_alignment,
GL_ARB_map_buffer_range, GL_ARB_multi_draw_indirect, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_occlusion_query2,
GL_ARB_pixel_buffer_object, GL_ARB_point_parameters, GL_ARB_point_sprite,
GL_ARB_program_interface_query, GL_ARB_provoking_vertex,
GL_ARB_sample_shading, GL_ARB_sampler_objects, GL_ARB_seamless_cube_map,
GL_ARB_separate_shader_objects, GL_ARB_shader_atomic_counters,
GL_ARB_shader_bit_encoding, GL_ARB_shader_image_load_store,
GL_ARB_shader_image_size, GL_ARB_shader_objects, GL_ARB_shader_precision,
GL_ARB_shader_stencil_export, GL_ARB_shader_storage_buffer_object,
GL_ARB_shader_subroutine, GL_ARB_shader_texture_lod,
GL_ARB_shading_language_100, GL_ARB_shading_language_420pack,
GL_ARB_shading_language_packing, GL_ARB_shadow, GL_ARB_shadow_ambient,

Bug#703854: squeeze: Unable to extract completely large rar archive

2013-03-25 Thread Danielsan 
Package: squeeze
Version: 0.2.3-12
Severity: important

Dear Maintainer,

I have some images folder compacted inside a large rar archives (more then 300
mega), when I try to extract them with Squeeze after while the operation of
extracting go to sleep without completing the extraction.

If I use comand line like unrar x archives.rar it finishes super fast without
problems.

Others useful informations:

i   bzip2
i A libarchive-zip-perl
i A libcompress-bzip2-perl
i A libtar0
i A libzip2
i A libzipios++0c2a
i   unace
i   unrar
i A zip



-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (990, 'testing'), (600, 'unstable'), (50, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages squeeze depends on:
ii  exo-utils   0.6.2-5
ii  libatk1.0-0 2.4.0-2
ii  libc6   2.13-38
ii  libcairo2   1.12.2-3
ii  libdbus-1-3 1.6.8-1
ii  libdbus-glib-1-20.100.2-1
ii  libexo-1-0  0.6.2-5
ii  libfontconfig1  2.9.0-7.1
ii  libfreetype62.4.9-1.1
ii  libgdk-pixbuf2.0-0  2.26.1-1
ii  libglib2.0-02.33.12+really2.32.4-5
ii  libgtk2.0-0 2.24.10-2
ii  libpango1.0-0   1.30.0-1
ii  libthunar-vfs-1-2   1.2.0-3+b1
ii  libxfce4util4   4.8.2-1
ii  multiarch-support   2.13-38

squeeze recommends no packages.

squeeze suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#703289: docky: In vertical position the last docklet icon is not recognized by mouse

2013-03-17 Thread Danielsan 
Package: docky
Version: 2.1.4-1
Severity: normal

Dear Maintainer,

I'm using Docky with vertical position on the left side of my laptop monitor
and last docklet icon on the bottom isn't recognized by mouse, it's active only
a little area, but very hard to find, because too close with the previous icon.

For avoiding this problem I put a docklet who I don't need to use but only for
looking like the CPU Monitor.

The same behavior happens if I put Docky on the right side of the Desktop. It
doesn't matter the dimension of the icons or the kind of docket because always
the last docklet icon on the bottom is not recognized by the mouse.

In the bottom position Docky works normally.

I'm using Debian Testing/Sid (Wheezy) and Xfce 4.8 like DE.

The screen resolution of my laptop:

Screen 0: minimum 320 x 200, current 1366 x 768, maximum 1600 x 1600
LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x
194mm
   1366x768   60.0*+
   1360x768   60.0
   1280x768   60.0
   1280x720   60.0
   1024x768   60.0
   1024x600   60.0
   800x60060.0
   800x48060.0
   640x48060.0
DFP1 disconnected (normal left inverted right x axis y axis)
CRT1 disconnected (normal left inverted right x axis y axis)

My repo's:

### Debian Ufficiale -- Testing
deb http://ftp.us.debian.org/debian/ testing main non-free contrib
# deb-src http://ftp.it.debian.org/debian/ testing main non-free contrib

### Debian Ufficiale -- Testing Sicurezza
deb http://security.debian.org/ testing/updates main contrib non-free
# deb-src http://security.debian.org/ testing/updates main contrib non-free

### Debian Ufficiale -- Sid
deb http://ftp.us.debian.org/debian/ unstable main non-free contrib
# deb-src http://ftp.it.debian.org/debian/ unstable main non-free contrib

### Debian Ufficiale -- Experimental
deb http://ftp.debian.org/debian/ ../project/experimental main
# deb-src http://ftp.debian.org/debian/ ../project/experimental main

### Debian Multimedia
deb ftp://ftp.deb-multimedia.org testing main non-free
# deb-src http://www.deb-multimedia.org testing main non-free

Being Docky a dock designed for Gnome I have also installed this packages:

i A gconf-defaults-service
i   gconf-editor
i   gconf-gsettings-backend
i A gconf-service
i A gconf2
i A gconf2-common
i A libgconf-2-4
i A libgconf2-4
i A libgconf2.0-cil
i A libgconfmm-2.6-1c2
i A python-gconf



-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (990, 'testing'), (600, 'unstable'), (50, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages docky depends on:
ii  gconf2  3.2.5-1+build1
ii  libc6   2.13-38
ii  libdbus-glib1.0-cil 0.5.0-4
ii  libdbus1.0-cil  0.7.0-5
ii  libgconf2.0-cil 2.24.2-3
ii  libglib2.0-02.33.12+really2.32.4-5
ii  libglib2.0-cil  2.12.10-5
ii  libgnome-keyring1.0-cil 1.0.0-4
ii  libgnomedesktop2.20-cil 2.26.0-8
ii  libgtk2.0-0 2.24.10-2
ii  libgtk2.0-cil   2.12.10-5
ii  libmono-addins0.2-cil   0.6.2-2
ii  libmono-cairo4.0-cil2.10.8.1-8
ii  libmono-corlib4.0-cil   2.10.8.1-8
ii  libmono-posix4.0-cil2.10.8.1-8
ii  libmono-sharpzip4.84-cil2.10.8.1-8
ii  libmono-system-core4.0-cil  2.10.8.1-8
ii  libmono-system-web4.0-cil   2.10.8.1-8
ii  libmono-system-xml-linq4.0-cil  2.10.8.1-8
ii  libmono-system-xml4.0-cil   2.10.8.1-8
ii  libmono-system4.0-cil   2.10.8.1-8
ii  libnotify0.4-cil0.4.0~r3032-6
ii  librsvg2-2.18-cil   2.26.0-8
ii  librsvg2-common 2.36.1-1
ii  libwnck2.20-cil 2.26.0-8
ii  libx11-62:1.5.0-1
ii  mono-runtime2.10.8.1-8

Versions of packages docky recommends:
pn  dockmanager  none

docky suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#703120: docky: Docky doesn't remember or doesn't load the docklets

2013-03-15 Thread Danielsan 
Package: docky
Version: 2.1.4-1
Severity: normal

Dear Maintainer,

Often at the beginning of graphic session docky doesn't remember or doesn't
load the docklets that I have set previously, so I have to reset everything
from start.

I'm using Debian Testing/Sid (Wheezy) and Xfce 4.8 like DE.

My repo's:

### Debian Ufficiale -- Testing
deb http://ftp.us.debian.org/debian/ testing main non-free contrib
# deb-src http://ftp.it.debian.org/debian/ testing main non-free contrib

### Debian Ufficiale -- Testing Sicurezza
deb http://security.debian.org/ testing/updates main contrib non-free
# deb-src http://security.debian.org/ testing/updates main contrib non-free

### Debian Ufficiale -- Sid
deb http://ftp.us.debian.org/debian/ unstable main non-free contrib
# deb-src http://ftp.it.debian.org/debian/ unstable main non-free contrib

### Debian Ufficiale -- Experimental
deb http://ftp.debian.org/debian/ ../project/experimental main
# deb-src http://ftp.debian.org/debian/ ../project/experimental main

### Debian Multimedia
deb ftp://ftp.deb-multimedia.org testing main non-free
# deb-src http://www.deb-multimedia.org testing main non-free

Being Docky a dock designed for Gnome I have also installed this packages:

i A gconf-defaults-service
i   gconf-editor
i   gconf-gsettings-backend - sistema di database della configurazione
d
p   gconf-gsettings-backend:i386- sistema di database della configurazione
d
i A gconf-service
i A gconf2
i A gconf2-common
i A libgconf-2-4
i A libgconf2-4
i A libgconf2.0-cil
i A libgconfmm-2.6-1c2
i A python-gconf



-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (990, 'testing'), (600, 'unstable'), (50, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages docky depends on:
ii  gconf2  3.2.5-1+build1
ii  libc6   2.13-38
ii  libdbus-glib1.0-cil 0.5.0-4
ii  libdbus1.0-cil  0.7.0-5
ii  libgconf2.0-cil 2.24.2-3
ii  libglib2.0-02.33.12+really2.32.4-5
ii  libglib2.0-cil  2.12.10-5
ii  libgnome-keyring1.0-cil 1.0.0-4
ii  libgnomedesktop2.20-cil 2.26.0-8
ii  libgtk2.0-0 2.24.10-2
ii  libgtk2.0-cil   2.12.10-5
ii  libmono-addins0.2-cil   0.6.2-2
ii  libmono-cairo4.0-cil2.10.8.1-8
ii  libmono-corlib4.0-cil   2.10.8.1-8
ii  libmono-posix4.0-cil2.10.8.1-8
ii  libmono-sharpzip4.84-cil2.10.8.1-8
ii  libmono-system-core4.0-cil  2.10.8.1-8
ii  libmono-system-web4.0-cil   2.10.8.1-8
ii  libmono-system-xml-linq4.0-cil  2.10.8.1-8
ii  libmono-system-xml4.0-cil   2.10.8.1-8
ii  libmono-system4.0-cil   2.10.8.1-8
ii  libnotify0.4-cil0.4.0~r3032-6
ii  librsvg2-2.18-cil   2.26.0-8
ii  librsvg2-common 2.36.1-1
ii  libwnck2.20-cil 2.26.0-8
ii  libx11-62:1.5.0-1
ii  mono-runtime2.10.8.1-8

Versions of packages docky recommends:
pn  dockmanager  none

docky suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org