Bug#934901: marked as done (Please switch to Python 3 or remove your package from Sid/Bullseye)
Hello, The PyGpiv package is not maintained anymore from upsream. So I think it's a good idea to remove python-gpiv from Sid. As I'm not a DD, I cannot do this by myself. Sincerely, Gerber van der Graaf On Fri, 2019-08-16 at 17:33 +, Debian Bug Tracking System wrote: > Your message dated Fri, 16 Aug 2019 17:31:53 + > with message-id > and subject line Bug#934832: Removed package(s) from unstable > has caused the Debian Bug report #934901, > regarding Please switch to Python 3 or remove your package from > Sid/Bullseye > to be marked as done. > > This means that you claim that the problem has been dealt with. > If this is not the case it is now your responsibility to reopen the > Bug report if necessary, and/or fix the problem forthwith. > > (NB: If you are a system administrator and have no idea what this > message is talking about, this may indicate a serious mail system > misconfiguration somewhere. Please contact ow...@bugs.debian.org > immediately.) > >
Bug#807233: gpiv: Update build dependencies for GSL 2.x
Hi Bas, Thanks for the patches for gpivtools and gpiv. Actually, I am not using this software at the moment and noticed very few usage by other users. So, more or less I left the development and debianizing of this software. Gpiv has already been removed from Sid and I do not have much time to dedicate to it. In case you are interested in this software, I will have a look at it. Else, I wonder if it makes sense to keep this software in Debian. Hartelijke groet, Gerber van der Graaf On Sun, 2015-12-06 at 16:17 +0100, Bas Couwenberg wrote: > Source: gpiv > Version: 0.6.1-2.3 > Severity: normal > Tags: patch > > Dear Maintainer, > > Please update your package for the ongoing gsl transition (#804246). > > The attached patch updates the build dependencies to use libgsl-dev. > > This change is required to not pull in GSL 1.x via libgsl0-dev. > > Please note that libgpiv (#807207) needs to be updated for GSL 2, > before gpiv can be rebuilt with GSL 2. > > Kind Regards, > > Bas
Bug#748770: diff NMU for 0.6.1-2.2
Hi Anton, Thanks very much for the repair. The package can be uploaded without delay. Again, thanks for the effort. Many greetings, Gerber On 05/26/2014 08:55 PM, Anton Gladky wrote: tags 748770 +pending +patch thanks Dear maintainer, I have prepared an NMU (versioned as 0.6.1-2.2) and uploaded to DELAYED/5. Please fell free to tell me if I should delay it longer, cancel or reschedule. Diff is attached. Best regards Anton -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#735279: gnome-session-flashback: Screen does not redraw when resizing or moving application windows
Package: gnome-session-flashback Version: 3.8.0-1 Severity: important Dear Maintainer, When moving or resizing a window, the screen is incorrectly updated. The contours of the window stay frozen on the screen, making working under this graphic environment impossible. Switching to a different desktop keeps the images of the initial desktop on the screen. I think it is identic or related to bug #708279 It is found that under the 'new' Gnome shell this behaviour does not occur. -- System Information: Debian Release: jessie/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages gnome-session-flashback depends on: ii gnome-panel 3.8.0-1 ii gnome-screensaver 3.6.1-1 ii gnome-session-bin 3.8.4-3 ii gnome-session-common3.8.4-3 ii gnome-settings-daemon 3.8.5-2 ii metacity1:2.34.13-1 ii nautilus3.8.2-2 ii notification-daemon 0.7.6-1 ii plasma-widgets-workspace [notification-daemon] 4:4.11.3-3 ii policykit-1-gnome 0.105-2 Versions of packages gnome-session-flashback recommends: ii gnome-power-manager 3.8.2-1 Versions of packages gnome-session-flashback suggests: ii desktop-base 7.0.3 ii gnome-keyring 3.8.2-2 ii gnome-user-guide 3.8.2-1 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#706084: paraview: pvbatch --version hangs
Package: paraview Version: 3.14.1-7 Severity: normal Dear Maintainer, Pvbatch is used during confiuration of FreeFOAM to check the paraview version installed on the system. Though, when running 'pvbatch --version', it hangs instead of reporting 'ParaView3.14.1' -- System Information: Debian Release: 7.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages paraview depends on: ii libavcodec53 6:0.8.6-1 ii libavformat53 6:0.8.6-1 ii libavutil51 6:0.8.6-1 ii libc6 2.13-38 ii libexpat1 2.1.0-1 ii libfreetype6 2.4.9-1.1 ii libgcc1 1:4.7.2-5 ii libgl1-mesa-glx [libgl1] 8.0.5-4 ii libhdf5-7 [libhdf5-7] 1.8.8-9.1 ii libjpeg8 8d-1 ii libmysqlclient18 5.5.30+dfsg-1.1 ii libogg0 1.3.0-4 ii libopenmpi1.3 1.4.5-1 ii libpng12-01.2.49-3 ii libpq59.1.9-1 ii libpython2.7 2.7.3-8 ii libqt4-help 4:4.8.2+dfsg-11 ii libqt4-network4:4.8.2+dfsg-11 ii libqt4-sql4:4.8.2+dfsg-11 ii libqtcore44:4.8.2+dfsg-11 ii libqtgui4 4:4.8.2+dfsg-11 ii libqtwebkit4 2.2.1-5 ii libsqlite3-0 3.7.16.2-1 ii libstdc++64.7.2-5 ii libswscale2 6:0.8.6-1 ii libtheora01.1.1+dfsg.1-3.1 ii libtiff4 3.9.6-11 ii libx11-6 2:1.5.0-1 ii libxml2 2.8.0+dfsg1-7+nmu1 ii libxt61:1.1.3-1 ii qt4-dev-tools 4:4.8.2+dfsg-11 ii tcl8.4 [tclsh]8.4.19-5 ii tcl8.5 [tclsh]8.5.11-2 ii zlib1g1:1.2.7.dfsg-13 Versions of packages paraview recommends: ii mpi-default-bin 1.0.1 ii paraview-doc 3.14.1-7 ii paraview-python 3.14.1-7 Versions of packages paraview suggests: ii h5utils 1.12.1-2 ii hdf5-tools 1.8.8-9.1 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#676620: RFS: FreeFOAM
Package: sponsorship-requests Severity: normal I am looking for a sponsor of the FreeFOAM software for Computational FLuid Dynamics (CFD) which uses the Control / Finite Volume Method. * Package name: freefoam Version : 0.1.0-1 Upstream Author : Michael Wild them...@users.sourceforge.net * URL : http://freefoam.sourceforge.net/ * License : GPL-3+ Section : science It builds the follwing binary packages: freefoam-dev-doc - software for Computational Fluid Dynamics - developers documentation freefoam - programs for Computational Fluid Dynamics (CFD) libfreefoam - libraries for Computational Fluid Dynamics (CFD) libfreefoam-dev - libraries for Computational Fluid Dynamics (CFD) - development files freefoam-user-doc - software for Computational Fluid Dynamics - user documentation The packages can be found at: http://mentors.debian.net/package/freefoam The respective dsc file can be found at: http://mentors.debian.net/debian/pool/main/f/freefoam/freefoam_0.1.0 +dfsg-1.dsc Also, there is a git repo at debian/science: http://git.debian.org/?p=debian-science/packages/freefoam.git Changes since the last upload: - Removed non-free files (+dfsg) - Repaired debian/watch The package also builds correctly under pbuilder. Gerber van der Graaf -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#667862: [PATCH] pygpiv: Helping to enable hardened build flags
Thank very much to you as well for helping to improve the quality of this software. Gerber On Fri, 2012-05-18 at 14:54 +0300, Jari Aalto wrote: Here are some more fixes included in upload. Alternatively you can download the archive from Debian with all the changes. Thank you for helping with this update, Jari -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#667862: [NMU] pygpiv: Helping to enable hardened build flags
Hi, I applied your patch and it seemed to build fine. So I think you can go ahead to upload your changes in Debian. Thanks very much for your efforts! Gerber On Sun, 2012-05-06 at 10:01 +0300, Jari Aalto wrote: Hi, as per: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=667862#15 I'm starting preparations to get hardening updates into Debian. Let me know if there is anything that needs adjusting or if something should delay the NMU. Thanks, Jari -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#667862: [PATCH] pygpiv: Helping to enable hardened build flags
/debian/control index 22ba977..a4b8717 100644 --- a/debian/control +++ b/debian/control @@ -3,9 +3,9 @@ Section: python Priority: extra Maintainer: Gerber van der Graaf gerber_gr...@users.sourceforge.net X-Python-Version: =2.7 -Standards-Version: 3.9.2 +Standards-Version: 3.9.3.1 Homepage: http://libgpiv.sourceforge.net/pygpiv.html -Build-Depends: debhelper (= 6), python-all-dev (= 2.6.6-3~), +Build-Depends: debhelper (= 9), dpkg-dev (= 1.16.1), python-all-dev (= 2.6.6-3~), swig, libglib2.0-dev, libfftw3-dev, libgsl0-dev, libhdf5-dev (= 1.8.8), libnetpbm10-dev, libpng-dev, libgpiv3-dev diff --git a/debian/patches/01_python2.6.diff b/debian/patches/01_python2.6.patch old mode 100755 new mode 100644 similarity index 69% rename from debian/patches/01_python2.6.diff rename to debian/patches/01_python2.6.patch index a93ed6a..1ae0bc0 --- a/debian/patches/01_python2.6.diff +++ b/debian/patches/01_python2.6.patch @@ -1,10 +1,6 @@ -#! /bin/sh /usr/share/dpatch/dpatch-run -## python2.6.dpatch by ger...@hamburg.upc.es -## -## All lines beginning with `## DP:' are a description of the patch. -## DP: No description. +From: ger...@hamburg.upc.es +Subject: No description. -@DPATCH@ diff -urNad '--exclude=CVS' '--exclude=.svn' '--exclude=.git' '--exclude=.arch' '--exclude=.hg' '--exclude=_darcs' '--exclude=.bzr' pygpiv-2.0.0~/pygpiv.i pygpiv-2.0.0/pygpiv.i --- pygpiv-2.0.0~/pygpiv.i 2009-11-03 19:44:41.0 +0100 +++ pygpiv-2.0.0/pygpiv.i2010-03-02 15:50:22.0 +0100 diff --git a/debian/patches/02_fix_multiarch_include.diff b/debian/patches/02_fix_multiarch_include.patch old mode 100755 new mode 100644 similarity index 82% rename from debian/patches/02_fix_multiarch_include.diff rename to debian/patches/02_fix_multiarch_include.patch index 298daad..12a56cc --- a/debian/patches/02_fix_multiarch_include.diff +++ b/debian/patches/02_fix_multiarch_include.patch @@ -1,10 +1,6 @@ -#! /bin/sh /usr/share/dpatch/dpatch-run -## 02_fix_multiarch_include.dpatch by Michael Terry mte...@ubuntu.com -## -## All lines beginning with `## DP:' are a description of the patch. -## DP: Use pkg-config to find library needed for glib-2.0 +From: Michael Terry mte...@ubuntu.com +Subject: Use pkg-config to find library needed for glib-2.0 -@DPATCH@ diff -urNad '--exclude=CVS' '--exclude=.svn' '--exclude=.git' '--exclude=.arch' '--exclude=.hg' '--exclude=_darcs' '--exclude=.bzr' pygpiv~/setup.py pygpiv/setup.py --- pygpiv~/setup.py 2011-07-05 11:19:59.0 -0400 +++ pygpiv/setup.py 2011-07-05 11:20:43.348848694 -0400 diff --git a/debian/patches/series b/debian/patches/series index ba06f05..fcc8e12 100644 --- a/debian/patches/series +++ b/debian/patches/series @@ -1,2 +1,2 @@ -01_python2.6.diff -02_fix_multiarch_include.diff +01_python2.6.patch +02_fix_multiarch_include.patch diff --git a/debian/rules b/debian/rules index a192652..bcb5ac6 100755 --- a/debian/rules +++ b/debian/rules @@ -10,6 +10,14 @@ #export DH_VERBOSE=1 PREFIX := debian/python-gpiv/usr +# NOTE: Sources wonät compile with all hardening enabled: +# export DEB_BUILD_MAINT_OPTIONS= hardening=+all + +DPKG_EXPORT_BUILDFLAGS = 1 +include /usr/share/dpkg/buildflags.mk + +CFLAGS += -Wall +LDFLAGS += -Wl,--as-needed clean: dh_testdir @@ -29,6 +37,8 @@ build-stamp: dh_testdir # Add here commands to compile the package. + CFLAGS=$(CFLAGS) $(CPPFLAGS) \ + LDFLAGS=$(LDFLAGS) \ python ./setup.py build -b debian/python-gpiv touch $@ @@ -36,7 +46,7 @@ build-stamp: install: build dh_testdir dh_testroot - dh_clean -k + dh_prep # Add here commands to install the package into debian/pygpiv. python ./setup.py install --root=debian/python-gpiv signature.asc Description: This is a digitally signed message part
Bug#668286: texlive-latex-extra: movie15.sty not found by asymptote
Package: texlive-latex-extra Version: 2011.20120322-1 Severity: normal Dear Maintainer, Creating freefoam-user-doc uses asymptote to create PDF's. When building it reports: /usr/share/asymptote/plain_Label.asy: 633.5: runtime: ! LaTeX Error: File `movie15.sty' not found. I suspect this movie15.sty was included previously in the texlive-latex-extra package, but has disapeared for some reason. Please, can movie15.sty be put back or can you give me an alternative way? -- Package-specific info: If you report an error when running one of the TeX-related binaries (latex, pdftex, metafont,...), or if the bug is related to bad or wrong output, please include a MINIMAL example input file that produces the error in your report. Please run your example with (pdf)latex -recorder ... (or any other program that supports -recorder) and send us the generated file with the extension .fls, it lists all the files loaded during the run and can easily explain problems induced by outdated files in your home directory. Don't forget to also include minimal examples of other files that are needed, e.g. bibtex databases. Often it also helps to include the logfile. Please, never send included pictures! If your example file isn't short or produces more than one page of output (except when multiple pages are needed to show the problem), you can probably minimize it further. Instructions on how to do that can be found at http://www.latex-einfuehrung.de/mini-en.html (english) or http://www.latex-einfuehrung.de/mini.html (german) ## minimal input file ## other files ## List of ls-R files -rw-r--r-- 1 root root 3158 Apr 10 17:40 /var/lib/texmf/ls-R lrwxrwxrwx 1 root root 29 Apr 2 02:27 /usr/share/texmf/ls-R - /var/lib/texmf/ls-R-TEXMFMAIN lrwxrwxrwx 1 root root 31 Apr 2 12:55 /usr/share/texlive/texmf/ls-R - /var/lib/texmf/ls-R-TEXLIVEMAIN -rw-rw-r-- 1 root staff 80 Apr 10 17:39 /usr/local/share/texmf/ls-R lrwxrwxrwx 1 root root 31 Apr 2 12:55 /usr/share/texlive/texmf-dist/ls-R - /var/lib/texmf/ls-R-TEXLIVEDIST lrwxrwxrwx 1 root root 31 Apr 2 12:55 /usr/share/texlive/texmf-dist/ls-R - /var/lib/texmf/ls-R-TEXLIVEDIST lrwxrwxrwx 1 root root 31 Apr 2 12:55 /usr/share/texlive/texmf/ls-R - /var/lib/texmf/ls-R-TEXLIVEMAIN ## Config files -rw-r--r-- 1 root root 1464 Apr 10 15:53 /etc/texmf/web2c/texmf.cnf -rw-r--r-- 1 root root 10446 Apr 10 17:39 /var/lib/texmf/web2c/fmtutil.cnf lrwxrwxrwx 1 root root 32 Apr 2 12:55 /usr/share/texmf/web2c/updmap.cfg - /var/lib/texmf/updmap.cfg-DEBIAN -rw-r--r-- 1 root root 16577 Apr 10 17:39 /var/lib/texmf/tex/generic/config/language.dat ## Files in /etc/texmf/web2c/ total 8 -rw-r--r-- 1 root root 283 Feb 28 2010 mktex.cnf -rw-r--r-- 1 root root 1464 Apr 10 15:53 texmf.cnf ## md5sums of texmf.d ca40c66f144b4bafc3e59a2dd32ecb9c /etc/texmf/texmf.d/00debian.cnf 055e06548bac99958d8ab2dd1248f2b4 /etc/texmf/texmf.d/80tex4ht.cnf 1df66bc319cec731e202eaf39f5d85e1 /etc/texmf/texmf.d/96JadeTeX.cnf -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages texlive-latex-extra depends on: ii dpkg 1.16.2 ii preview-latex-style11.86-10 ii tex-common 3.6 ii texlive-binaries 2011.20120328-1 ii texlive-common 2011.20120322-2 ii texlive-latex-recommended 2011.20120322-2 ii texlive-pictures 2011.20120322-2 Versions of packages texlive-latex-extra recommends: ii texlive-latex-extra-doc 2011.20120322-1 ii texpower 0.2-7.1 Versions of packages texlive-latex-extra suggests: ii libfile-which-perl 1.09-1 Versions of packages tex-common depends on: ii debconf [debconf-2.0] 1.5.42 ii dpkg 1.16.2 ii ucf3.0025+nmu2 Versions of packages tex-common suggests: ii debhelper 9.20120322 Versions of packages texlive-latex-extra is related to: ii tex-common3.6 ii texlive-binaries 2011.20120328-1 -- debconf information: tex-common/check_texmf_wrong: tex-common/check_texmf_missing: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#657199: libgpiv: FTBFS against hdf5 1.8.8
I created a patch that is included in libgpiv3_0.6.1-4. Though, I do not find any bug reports on the Bug tracking system of this package: http://bugs.debian.org/cgi-bin/pkgreport.cgi?pkg=libgpiv3;dist=unstable So, uploading (by a sponsor, as I'm not a DD) might give problems. What to do? Thanks, Gerber On Tue, 2012-01-24 at 20:49 +0100, Julien Cristau wrote: Source: libgpiv Version: 0.6.1-3 Severity: serious Tags: wheezy sid Justification: fails to build from source (but built successfully in the past) It looks like API changes in hdf5 break libgpiv: https://buildd.debian.org/status/fetch.php?pkg=libgpivarch=s390xver=0.6.1-3stamp=1326908982 Cheers, Julien -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#657199: libgpiv: FTBFS against hdf5 1.8.8
Thanks, I will have a look at it. Gerber On Tue, 2012-01-24 at 20:49 +0100, Julien Cristau wrote: Source: libgpiv Version: 0.6.1-3 Severity: serious Tags: wheezy sid Justification: fails to build from source (but built successfully in the past) It looks like API changes in hdf5 break libgpiv: https://buildd.debian.org/status/fetch.php?pkg=libgpivarch=s390xver=0.6.1-3stamp=1326908982 Cheers, Julien -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#554737: gpivtools: diff for NMU version 0.6.0-1.1
Great! Is there any action expected from my side? Thank you very much for all. Gerber van der Graaf On Sat, 2011-12-03 at 14:34 +0100, Meike Reichle wrote: Dear maintainer, I've prepared an NMU for gpivtools (versioned as 0.6.0-1.1). The diff is attached to this message. Regards. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#650563: libgpiv: FTBFS: ../../../lib/io_png.c:170:39: error: 'png_voidp_NULL' undeclared (first use in this function)
Hi, I do not have Debian/Experimental connected on my Debian/Unstable system and would like to avoid that as it also is a production machine. Therefore, I prefer to wait until libpng-1.4 will arrive in Debian/Unstable before I will send in a new package. From some searches on the web I understand that the macros png_voidp_NULL and png_error_ptr_NULL (probably all PNG_NO_TYPECAST_NULL) are no longer supported in libpng-1.4. These can easily be changed to 0 or to (png_error_ptr)NULL. I prefer the last solution. z_best_compression is not found as probably a dependency to zlib1g-dev will have to be added in debian/control file. Currently, libgpiv compiles fine without this dependency using pbuilder for Debian/Unstable. There is no libpng-dev in Testing which depends on zlib1g-dev. I only found libpng-1.5, which depends on zlib1g. So this is more 'bug' of libpng-1.5(-dev) than of libgpiv. There have been done some major changes (complete re-organization of the source code) in libgpiv and soon some other (improvements on the accuracy of the resulting data) will have been done yet. In case you need libgpiv (and pygpiv) you might change them manually. Sincerely, Gerber to (png_voidp)NULLOn Thu, 2011-12-01 at 06:14 +0900, Nobuhiro Iwamatsu wrote: Source: libgpiv Version: 0.6.1-3 Severity: wishlist User: lib...@packages.debian.org Usertags: libpng15-transition Hi, I uploaded libpng 1.5 to experimental. libpng maintainers plan to transition from libpng 1.2 to 1.5. I am checking build it the package depend to libpng. I noticed your package FTBFS by libpng 1.5. I attached build log. Could you check your package? Best regards, Nobuhiro -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#650563: libgpiv: FTBFS: ../../../lib/io_png.c:170:39: error: 'png_voidp_NULL' undeclared (first use in this function)
Sorry, I did not have time today and will have a look at it tomorrow. Apologizes for this inconvenience. Gerber van der Graaf On Thu, 2011-12-01 at 06:14 +0900, Nobuhiro Iwamatsu wrote: Source: libgpiv Version: 0.6.1-3 Severity: wishlist User: lib...@packages.debian.org Usertags: libpng15-transition Hi, I uploaded libpng 1.5 to experimental. libpng maintainers plan to transition from libpng 1.2 to 1.5. I am checking build it the package depend to libpng. I noticed your package FTBFS by libpng 1.5. I attached build log. Could you check your package? Best regards, Nobuhiro -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#646418: gpivtools: Please update Depends: on MPI Python packages
Thanks for the patch. I will include it in the next release. Gerber On Sun, 2011-10-23 at 20:00 -0700, Nicholas Breen wrote: mpipython | openmpipython | mpich2python, -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#621070: python-vmtk: searches libvtkCommonPythonD.so.5.4
Package: python-vmtk Version: 0.9.0-2 Severity: important when running vmtkimagereader -f dicom it does not find the correct module. It is searching for libvtkCommonPythonD.so.5.4. This file is not installed on my amd64 Sid system. However I did find libvtkCommonPython.so.5.6.1 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages python-vmtk depends on: ii libavcodec524:0.6.2-1Libav codec library ii libavformat52 4:0.6.2-1Libav file format library ii libavutil50 4:0.6.2-1Libav utility library ii libc6 2.11.2-13Embedded GNU C Library: Shared lib ii libexpat1 2.0.1-7 XML parsing C library - runtime li ii libfreetype62.4.4-1 FreeType 2 font engine, shared lib ii libgcc1 1:4.6.0-2GCC support library ii libgdcm2.0 2.0.17-2+b1 Grassroots DICOM runtime libraries ii libgl1-mesa-glx [libgl1 7.10-4 A free implementation of the OpenG ii libgl2ps0 1.3.5-2 Lib providing high quality vector ii libice6 2:1.0.7-1X11 Inter-Client Exchange library ii libinsighttoolkit3.20 3.20.0-9 Image processing toolkit for regis ii libjpeg62 6b1-1The Independent JPEG Group's JPEG ii libmysqlclient165.1.56-1 MySQL database client library ii libopenmpi1.3 1.4.3-2 high performance message passing l ii libpng12-0 1.2.44-2 PNG library - runtime ii libpq5 9.0.3-1 PostgreSQL C client library ii libsm6 2:1.2.0-1X11 Session Management library ii libstdc++6 4.6.0-2 The GNU Standard C++ Library v3 ii libswscale0 4:0.6.2-1Libav video scaling library ii libtiff43.9.4-9 Tag Image File Format (TIFF) libra ii libvmtk0.9 0.9.0-2 runtime libraries for vmtk ii libvtk5.4 5.4.2-8 Visualization Toolkit - A high lev ii libx11-62:1.4.2-1X11 client-side library ii libxext62:1.2.0-2X11 miscellaneous extension librar ii libxft2 2.2.0-2 FreeType-based font drawing librar ii libxss1 1:1.2.1-1X11 Screen Saver extension library ii libxt6 1:1.1.1-1X11 toolkit intrinsics library ii python 2.6.6-12 interactive high-level object-orie ii python-support 1.0.11 automated rebuilding support for P ii python-vtk 5.6.1-4 Python bindings for VTK ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime python-vmtk recommends no packages. python-vmtk suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#621070: fresh rebuild works
A fresh build of the python-vmtk seems to solve the problem. I also upgraded the debian-policy to Standards-Version: 3.9.1 Let me know if I will have to upload it to debian-mentors for sponsoring Gerber -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#528662: activity on freefoam
Though no activity has been seen on the packaging of freefoam, there is still work in progress. Upstream author of FreeFOAM is completely re-writing the UserGUIDE. Even though the UserGUIDE for OpenFOAM has been issued under the GPL licence, the source of the text (it was written in latex) has never been provided. This prohibited to include the freefoam-userdoc package included in Debian/Main. Therefore, the whole writing has been re-done from scratch, this time using Asciidoc, and adapted for the FreeFOAM software. Once this job will be finished, it is hoped that a new release of the freefoam-* packages will be issued, soon. A pre-release of the debian packages can be found at my personal repository by incuding the following lines in /etc/apt/sources.list: deb ftp://mndeupm.upc.es/debian ./ deb-src ftp://mndeupm.upc.es/debian ./ Gerber -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#596957: Intel graphics chipset
I think it is due to the Intel chipset of the graphics card. Using a HP Compaq DC7900 SFF PC ALL model, lspci reports: 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:03.0 Communication controller: Intel Corporation 4 Series Chipset HECI Controller (rev 03) 00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER Controller (rev 03) 00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT Controller (rev 03) 00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2) 00:1f.0 ISA bridge: Intel Corporation 82801JDO (ICH10DO) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 4-port SATA IDE Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller (rev 02) On a non-trade mark clone PC (amd64 running Debian/Sid), the Intel chipset provokes crashing of the X11 Gnome-desktop when launching the GEOM module. After installing a nVidia GeForce9500 GT graphics card with non-free driver from nVidia, Salome behaves, so far, without problems. The output of lspci using the Intel graphic chipset on this system reports: 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:03.0 Communication controller: Intel Corporation 4 Series Chipset HECI Controller (rev 03) 00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER Controller (rev 03) 00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT Controller (rev 03) 00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2) 00:1f.0 ISA bridge: Intel Corporation 82801JDO (ICH10DO) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 4-port SATA IDE Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller (rev 02) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#596957: salome: freezes when loading Geom
Package: salome Version: 5.1.3-10 Severity: important Salome freezes when loading the Geom module. A 'Fatal error' window pops up reporting: SIGSEGV 'segmentation violation' detected. Address 0. When closing this error window, a new one pops up. In case the error window has been moved outside the viewer area and subsequently closed, a new error window only pops up, with the same message, when moving the pointer within the viewer area. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages salome depends on: ii libboost-signals1.42.0 1.42.0-4 managed signals and slots library ii libboost-system1.42.0 1.42.0-4 Operating system (e.g. diagnostics ii libboost-thread1.42.0 1.42.0-4 portable C++ multi-threading ii libc6 2.11.2-5 Embedded GNU C Library: Shared lib ii libcos4-1 4.1.3-1+b1 omniORB CORBA services stubs ii libcppunit-1.12-1 1.12.1-1 Unit Testing Library for C++ ii libexpat1 2.0.1-7 XML parsing C library - runtime li ii libgcc1 1:4.4.4-14 GCC support library ii libgfortran34.4.4-14 Runtime library for GNU Fortran ap ii libgl1-mesa-glx [libgl1 7.7.1-4 A free implementation of the OpenG ii libglu1-mesa [libglu1] 7.7.1-4 The OpenGL utility library (GLU) ii libgvc5 2.26.3-5 rich set of graph drawing tools - ii libhdf5-openmpi-1.8.4 1.8.4-patch1-2 Hierarchical Data Format 5 (HDF5) ii libmed1 2.3.6-3 Library to exchange meshed data (F ii libmedimportcxx02.3.6-3 Library to import old version file ii libomniorb4-1 4.1.3-1+b1 omniORB core libraries ii libomnithread3c24.1.3-1+b1 C++ threading library ii libopencascade-foundati 6.3.0.dfsg.1-6 OpenCASCADE CAE platform shared li ii libopencascade-modeling 6.3.0.dfsg.1-6 OpenCASCADE CAE platform shared li ii libopencascade-ocaf-6.3 6.3.0.dfsg.1-6 OpenCASCADE CAE platform shared li ii libopencascade-ocaf-lit 6.3.0.dfsg.1-6 OpenCASCADE CAE platform shared li ii libopencascade-visualiz 6.3.0.dfsg.1-6 OpenCASCADE CAE platform shared li ii libopencascade-visualiz 6.3.0.dfsg.1-6 OpenCASCADE CAE platform library d ii libopenmpi1.3 1.4.2-4 high performance message passing l ii libpython2.62.6.6-4 Shared Python runtime library (ver ii libqscintilla2-52.4.3-1 The Qt4 port of the Scintilla sour ii libqt4-opengl 4:4.6.3-2Qt 4 OpenGL module ii libqt4-xml 4:4.6.3-2Qt 4 XML module ii libqtcore4 4:4.6.3-2Qt 4 core module ii libqtgui4 4:4.6.3-2Qt 4 GUI module ii libqwt5-qt4 5.2.0-1 Qt4 widgets library for technical ii libscotch-5.1 5.1.8a.dfsg-2programs and libraries for graph, ii libssl0.9.8 0.9.8o-2 SSL shared libraries ii libstdc++6 4.4.4-14 The GNU Standard C++ Library v3 ii libvtk5.4 5.4.2-7+b2 Visualization Toolkit - A high lev ii libx11-62:1.3.3-3X11 client-side library ii libxml2 2.7.7.dfsg-4 GNOME XML library ii libxt6 1:1.0.7-1X11 toolkit intrinsics library ii omniorb4-nameserver 4.1.3-1 Transitional package for the omniO ii python 2.6.6-1 interactive high-level object-orie ii python-central 0.6.16 register and build utility for Pyt ii python-omniorb 3.3-1Python bindings for omniORB ii python-vtk 5.4.2-7+b2 Python bindings for VTK ii salome-common 5.1.3-10 Numerical simulation pre- and post ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime salome recommends no packages. Versions of packages salome suggests: ii salome-doc5.1.3-10 Numerical simulation pre- and post ii salome-examples 5.1.3-10 Numerical simulation pre- and post -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#596959: salome: freezes when loading Geom
Package: salome Version: 5.1.3-10 Severity: important Salome freezes when loading the Geom module. A 'Fatal error' window pops up reporting: SIGSEGV 'segmentation violation' detected. Address 0. When closing this error window, a new one pops up. In case the error window has been moved outside the viewer area and subsequently closed, a new error window only pops up, with the same message, when moving the pointer within the viewer area. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages salome depends on: ii libboost-signals1.42.0 1.42.0-4 managed signals and slots library ii libboost-system1.42.0 1.42.0-4 Operating system (e.g. diagnostics ii libboost-thread1.42.0 1.42.0-4 portable C++ multi-threading ii libc6 2.11.2-5 Embedded GNU C Library: Shared lib ii libcos4-1 4.1.3-1+b1 omniORB CORBA services stubs ii libcppunit-1.12-1 1.12.1-1 Unit Testing Library for C++ ii libexpat1 2.0.1-7 XML parsing C library - runtime li ii libgcc1 1:4.4.4-14 GCC support library ii libgfortran34.4.4-14 Runtime library for GNU Fortran ap ii libgl1-mesa-glx [libgl1 7.7.1-4 A free implementation of the OpenG ii libglu1-mesa [libglu1] 7.7.1-4 The OpenGL utility library (GLU) ii libgvc5 2.26.3-5 rich set of graph drawing tools - ii libhdf5-openmpi-1.8.4 1.8.4-patch1-2 Hierarchical Data Format 5 (HDF5) ii libmed1 2.3.6-3 Library to exchange meshed data (F ii libmedimportcxx02.3.6-3 Library to import old version file ii libomniorb4-1 4.1.3-1+b1 omniORB core libraries ii libomnithread3c24.1.3-1+b1 C++ threading library ii libopencascade-foundati 6.3.0.dfsg.1-6 OpenCASCADE CAE platform shared li ii libopencascade-modeling 6.3.0.dfsg.1-6 OpenCASCADE CAE platform shared li ii libopencascade-ocaf-6.3 6.3.0.dfsg.1-6 OpenCASCADE CAE platform shared li ii libopencascade-ocaf-lit 6.3.0.dfsg.1-6 OpenCASCADE CAE platform shared li ii libopencascade-visualiz 6.3.0.dfsg.1-6 OpenCASCADE CAE platform shared li ii libopencascade-visualiz 6.3.0.dfsg.1-6 OpenCASCADE CAE platform library d ii libopenmpi1.3 1.4.2-4 high performance message passing l ii libpython2.62.6.6-4 Shared Python runtime library (ver ii libqscintilla2-52.4.3-1 The Qt4 port of the Scintilla sour ii libqt4-opengl 4:4.6.3-2Qt 4 OpenGL module ii libqt4-xml 4:4.6.3-2Qt 4 XML module ii libqtcore4 4:4.6.3-2Qt 4 core module ii libqtgui4 4:4.6.3-2Qt 4 GUI module ii libqwt5-qt4 5.2.0-1 Qt4 widgets library for technical ii libscotch-5.1 5.1.8a.dfsg-2programs and libraries for graph, ii libssl0.9.8 0.9.8o-2 SSL shared libraries ii libstdc++6 4.4.4-14 The GNU Standard C++ Library v3 ii libvtk5.4 5.4.2-7+b2 Visualization Toolkit - A high lev ii libx11-62:1.3.3-3X11 client-side library ii libxml2 2.7.7.dfsg-4 GNOME XML library ii libxt6 1:1.0.7-1X11 toolkit intrinsics library ii omniorb4-nameserver 4.1.3-1 Transitional package for the omniO ii python 2.6.6-1 interactive high-level object-orie ii python-central 0.6.16 register and build utility for Pyt ii python-omniorb 3.3-1Python bindings for omniORB ii python-vtk 5.4.2-7+b2 Python bindings for VTK ii salome-common 5.1.3-10 Numerical simulation pre- and post ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime salome recommends no packages. Versions of packages salome suggests: ii salome-doc5.1.3-10 Numerical simulation pre- and post ii salome-examples 5.1.3-10 Numerical simulation pre- and post -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#587234: solved
The problem that generated this bug appeared to be in upstream software instead of this package. So this bug can be closed. Apologizes for the noise, Thanks, Gerber van der Graaf -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#587234: mpicxx.h: error: mpi.h: No such file or directory
Package: mpi-default-dev Version: 0.6 Severity: normal When building the FreeFOAM software for debianizing (http://freefoam.sf.net, not yet in debian) from the upstream git repository, the compilation fails with error message: = [ 57%] Building CXX object src/decompositionMethods/scotchDecomp/CMakeFiles/scotchDecomp.dir/scotchDecomp.C.o cd /home/gerber/FreeFOAM/build/src/decompositionMethods/scotchDecomp /usr/bin/c++ -DscotchDecomp_EXPORTS -DDP -DNoRepository -Dlinux64 -fPIC -I/home/gerber/FreeFO AM/build/include -I/usr/include/scotch -o CMakeFiles/scotchDecomp.dir/scotchDecomp.C.o -c /home/gerber/FreeFOAM/freefoam2/src/decompositionMethods/scotchDecomp/scotc hDecomp.C In file included from /usr/include/mpi/mpi.h:1886, from /usr/include/scotch/scotch.h:75, from /home/gerber/FreeFOAM/freefoam2/src/decompositionMethods/scotchDecomp/scotchDecomp.C:117: /usr/include/mpi/openmpi/ompi/mpi/cxx/mpicxx.h:33:17: error: mpi.h: No such file or directory /usr/include/mpi/openmpi/ompi/mpi/cxx/mpicxx.h:201:44: error: openmpi/ompi/mpi/cxx/constants.h: No such file or directory /usr/include/mpi/openmpi/ompi/mpi/cxx/mpicxx.h:202:44: error: openmpi/ompi/mpi/cxx/functions.h: No such file or directory /usr/include/mpi/openmpi/ompi/mpi/cxx/mpicxx.h:203:43: error: openmpi/ompi/mpi/cxx/datatype.h: No such file or directory (ETC) == While I do find these files on my system at: /usr/include/mpi/openmpi/ompi/mpi/cxx/ Maybe a wrong or missing symlink? I tested the example of hello_cxx from openmpi-doc package, after configuring and building with CMake implemented find_package(MPI REQUIRED), like the FreeFOAM package. This, though, works fine. Gerber van der Graaf -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages mpi-default-dev depends on: ii libopenmpi-dev1.4.1-3high performance message passing l mpi-default-dev recommends no packages. mpi-default-dev suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#586109: python-gpiv: does not depend on python
The symlink pointed to /usr/bin/python2.5 instead of python2.5 (I made by myself some time ago), which aparently doesn work. Thanks for the tip and the bugreport. Gerber On Thu, 2010-06-17 at 16:23 +0200, Jakub Wilk wrote: * Gerber van der Graaf gerber.vdgr...@gmail.com, 2010-06-17, 15:19: I applied your modification. Though when building the deb package I get: dh_pysupport: Cannot detect default Python version It builds fine here. Have you tried building it in a clean chroot. As far as I understand it, this error triggers only if there's something wrong with your /usr/bin/python symlink. The symlink should look like this: $ readlink /usr/bin/python python2.5 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#586109: python-gpiv: does not depend on python
Hi, I applied your modification. Though when building the deb package I get: dh_pysupport: Cannot detect default Python version There has been a bugreport #572155 reporting this message as well, but it seems to be solved. Any idea what I can do? Thanks, Gerber On Wed, 2010-06-16 at 16:07 +0200, Jakub Wilk wrote: Package: python-gpiv Version: 2.0.0-2 Severity: serious Tags: patch Justification: Debian Policy 3.5, Python Policy 2.4 Hello, python-gpiv does not depend on python as it should. The attached patch fixes this bug. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#506033: Please add more functionality
I am missing the following functions in order to use libscotchmetis-dev in FreeFOAM: METIS_WPartGraphRecursive, METIS_WPartGraphKway. Thanks, Gerber van der Graaf -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#528662: FreeFOAM 0.1rc4 packages available
Provisional FreeFOAM-0.1rc4 debian packages are available at ftp://hamburg.upc.es/debian. These packages are meant for testing only. Gerber van der Graaf signature.asc Description: This is a digitally signed message part
Bug#528662: progress packaging freefoam
Hi, Here is some information on the progress of packaging FreeFOAM. If there is somebody who would like to assist / collaborate, just let me know. Packaging FreeFOAM against release 0.1.0rc4 is starting to get in good shape, including building from source using pbuilder. Currently, the next binary packages will be build: - libfreefoam: libraries for Computational Fluid Dynamics (CFD) - libfreefoam-dev: libraries for Computational Fluid Dynamics (CFD) - development files - freefoam: programs for Computational Fluid Dynamics (CFD) - freefoam-user-doc: software for Computational Fluid Dynamics - user documentation - freefoam-dev-doc: software for Computational Fluid Dynamics - developers documentation Though there are still some issues: - Some lintian errors and warnings - Building with MPI enabled needs non-free parmgridgen-dev as libscotchparmetis does not yet cover fully the libparmgridgen functionality (see bug #582489). So, for the moment the FreeFOAM packages will have to reside in contrib :( - Waiting until formal first FreeFOAM release will be issued. Upstream developer is working on that. Gerber van der Graaf -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#582489: libscotchmetis-dev: does not clean up after package removal
Package: libscotchmetis-dev Severity: normal I think the package does not remove the following files after apt-get remove libscotchmetis-dev: /usr/lib/libscotchmetis-5.1.so /usr/lib/libmetis.so.3.1 Similar issues I found with libscotchparmetis-dev: /usr/lib/libparmetis.so.3.1 This is quite confusing whether it cannot be distinguished if the lib(par)metis files origin from the scotch(par)metis-dev packages or from the non-free (par)metis packages. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libscotchmetis-dev depends on: pn libscotch-dev none (no description available) libscotchmetis-dev recommends no packages. libscotchmetis-dev suggests no packages. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#573624: more info
Indeed, I would preferred to use reportbug, but the system cannot be conected to the internet (whether wirelis or wired). The output of: apt-cache show firmware-linux is found in: firmware-linux.txt The output of: apt-cache show firmware-linux-free is found in: firmware-linux-free.txt The output of: apt-cache show firmware-linux-nonfree is found in: firmware-linux-nonfree.txt The output of: apt-cache show firmware-iwlwifi is found in: firmware-iwlwifi.txt The output of ip address show is found in: ip_address_show.txt The output of cat proc/devices (as requested /proc/dev does not exist) is in: cat__proc_devices.txt The output of cat /etc/network/interfacesis found in: cat__etc_network_interfaces.txt Thanks very much for your (quick!) response. Gerber van der Graaf Package: firmware-linux Status: install ok installed Priority: optional Section: non-free/kernel Installed-Size: 32 Maintainer: Debian Kernel Team debian-ker...@lists.debian.org Architecture: all Source: firmware-nonfree Version: 0.23 Depends: firmware-linux-free, firmware-linux-nonfree (= 0.23) Description: Binary firmware for various drivers in the Linux kernel This package depends on both free and non-free firmware which was previously included in the Linux kernel. Package: firmware-linux Priority: optional Section: non-free/kernel Installed-Size: 32 Maintainer: Debian Kernel Team debian-ker...@lists.debian.org Architecture: all Source: firmware-nonfree Version: 0.22 Depends: firmware-linux-free, firmware-linux-nonfree (= 0.22) Filename: pool/non-free/f/firmware-nonfree/firmware-linux_0.22_all.deb Size: 4664 MD5sum: 8e647ca483e83bed942d4a3fd762d906 SHA1: b5fb52194b06db3199e7da9ca5a394f82958f029 SHA256: fbeb6543bfbccd1ee8cea1b63c3c6e3ddd19b3442e80c3d393a999ca60b61c8e Description: Binary firmware for various drivers in the Linux kernel This package depends on both free and non-free firmware which was previously included in the Linux kernel. Tag: admin::hardware, role::data Package: firmware-linux-free Priority: optional Section: kernel Installed-Size: 252 Maintainer: Debian Kernel Team debian-ker...@lists.debian.org Architecture: all Source: linux-2.6 Version: 2.6.32-9 Filename: pool/main/l/linux-2.6/firmware-linux-free_2.6.32-9_all.deb Size: 126570 MD5sum: 27fc074116e2fdee2cd40a9bc0c3d070 SHA1: 8d84c64d66851f1d0b36c830a9e01567e0d38e56 SHA256: ebf62b4fc7c6ae5bee1dc0da404d1040f84d5f93a95a876f33f8af81d36fd942 Description: Binary firmware for various drivers in the Linux kernel This package contains firmware which was previously included in the Linux kernel and which is compliant with the Debian Free Software Guidelines. . Most firmware previously included in the Linux kernel is non-free and has been moved to the firmware-linux-nonfree package. Tag: admin::hardware, role::data, use::driver Package: firmware-linux-free Priority: optional Section: kernel Installed-Size: 248 Maintainer: Debian Kernel Team debian-ker...@lists.debian.org Architecture: all Source: linux-2.6 Version: 2.6.32-8 Filename: pool/main/l/linux-2.6/firmware-linux-free_2.6.32-8_all.deb Size: 125878 MD5sum: f378b039a86f09ac30ea2d1324dd72cf SHA1: 28f3bd79a42d97ddd3ce59af4a2ccdb35441b5e1 SHA256: a60a1b78aef49507f359f1353194938262cafa3982f255230acbeaaaf95817af Description: Binary firmware for various drivers in the Linux kernel This package contains firmware which was previously included in the Linux kernel and which is compliant with the Debian Free Software Guidelines. . Most firmware previously included in the Linux kernel is non-free and has been moved to the firmware-linux-nonfree package. Tag: admin::hardware, role::data, use::driver 1: lo: LOOPBACK,UP,LOWER_UP mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: BROADCAST,MULTICAST mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:26:9e:43:17:5a brd ff:ff:ff:ff:ff:ff 3: wlan0: BROADCAST,MULTICAST mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:1e:64:05:b6:7a brd ff:ff:ff:ff:ff:ff 4: pan0: BROADCAST,MULTICAST mtu 1500 qdisc noop state DOWN link/ether 6e:bb:39:9c:81:10 brd ff:ff:ff:ff:ff:ff Character devices: 1 mem 4 /dev/vc/0 4 tty 4 ttyS 5 /dev/tty 5 /dev/console 5 /dev/ptmx 6 lp 7 vcs 10 misc 13 input 14 sound/mixer 14 sound/dsp 14 sound/audio 14 sound/adsp 21 sg 29 fb 81 video4linux 99 ppdev 116 alsa 128 ptm 136 pts 180 usb 189 usb_device 216 rfcomm 226 drm 253 bsg 254 rtc Block devices: 3 ide0 259 blkext 7 loop 8 sd 11 sr 22 ide1 65 sd 66 sd 67 sd 68 sd 69 sd 70 sd 71 sd 128 sd 129 sd 130 sd 131 sd 132 sd 133 sd 134 sd 135 sd 254 device-mapper auto lo iface lo inet loopback Package: firmware-linux-nonfree Status: install ok installed Priority: optional Section: non-free/kernel Installed-Size: 816 Maintainer: Debian Kernel Team debian-ker...@lists.debian.org Architecture
Bug#573624: more info
Running 'ifconfig wlan0 up' gives: 'wlan: ERROR while getting interface flags: no such device'. Examining dmesg after this does not give any output concerning wlan. Let me know if you need some more logging messages and, if so, where I can find it. Running 'ifconfig wlan0 up' gives: 'wlan: ERROR while getting interface flags: no such device'. Examining dmesg after this does not give any output concerning wlan. Let me know if you need some more logging messages and, if so, where I can find it. I tried to set-up a connection with network-admin, but there is no 'Connections' tabulator. I attach the output of /proc/net/dev here. Gerber van der Graaf I tried to set-up a connection with network-admin, but there is no 'Connections' tabulator. I attach the output of /proc/net/dev here. Gerber van der Graaf Inter-| Receive| Transmit face |bytespackets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 528 8000 0 0 0 528 8000 0 0 0 eth0: 0 0000 0 0 00 0000 0 0 0 wlan0: 0 0000 0 0 00 0000 0 0 0 pan0: 0 0000 0 0 00 0000 0 0 0
Bug#573624: Intel Wireless WiFi Link 1000 Series doesn't load wlan0
[ 25.197587] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.200410] Bluetooth: BNEP filters: protocol multicast [ 25.227849] Bridge firewalling registered [ 25.248611] Bluetooth: SCO (Voice Link) ver 0.6 [ 25.251359] Bluetooth: SCO socket layer initialized [ 26.026147] lp: driver loaded but no devices found [ 26.040439] ppdev: user-space parallel port driver [ 29.264009] CPU0 attaching NULL sched-domain. [ 29.264017] CPU1 attaching NULL sched-domain. [ 29.284601] CPU0 attaching sched-domain: [ 29.284608] domain 0: span 0-1 level MC [ 29.284612] groups: 0 1 [ 29.284619] domain 1: span 0-1 level CPU [ 29.284622]groups: 0-1 (cpu_power = 2048) [ 29.284630] CPU1 attaching sched-domain: [ 29.284633] domain 0: span 0-1 level MC [ 29.284637] groups: 1 0 [ 29.284643] domain 1: span 0-1 level CPU [ 29.284646]groups: 0-1 (cpu_power = 2048) [ 54.307913] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 54.308692] ISOFS: changing to secondary root == End dmesg Thanks very much in forward, Gerber van der Graaf -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#571622: Intel Wireless WiFi Link 1000 Series doesn't load wlan0
Package: firmware-iwlwifi Version: 0.22 Severity: normal On my Acer Aspire 1810TZ, Using linux-image-2.6 the /dev/wlan0 is not created. Here a part of the (I think) relevant output of dmesg: [ 20.494039] atl1c :01:00.0: version 1.0.0.1-NAPI [ 20.499538] acer-wmi: Acer Laptop ACPI-WMI Extras [ 20.508404] acer-wmi: Brightness must be controlled by generic video driver [ 20.626459] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 20.626563] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 20.626740] iwlagn :02:00.0: PCI INT A - GSI 19 (level, low) - IRQ 19 [ 20.626850] iwlagn :02:00.0: setting latency timer to 64 [ 20.626927] iwlagn :02:00.0: Detected Intel Wireless WiFi Link 1000 Series BGN REV=0x6C [ 20.631363] Linux video capture interface: v2.00 [ 20.663102] iwlagn :02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 20.663347] iwlagn :02:00.0: irq 27 for MSI/MSI-X [ 20.694574] uvcvideo: Found UVC 1.00 device WebCam (064e:a102) [ 20.712662] input: WebCam as /devices/pci:00/:00:1d.7/usb2/2-5/2-5:1.0/input/input6 [ 20.712820] usbcore: registered new interface driver uvcvideo [ 20.712892] USB Video Class driver (v0.1.0) [ 20.728510] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.930587] HDA Intel :00:1b.0: PCI INT A - GSI 22 (level, low) - IRQ 22 [ 20.930736] HDA Intel :00:1b.0: setting latency timer to 64 [ 21.048911] hda_codec: ALC269: BIOS auto-probing. [ 21.049709] input: HDA Digital PCBeep as /devices/pci:00/:00:1b.0/input/input7 [ 21.120886] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa4 [ 21.166823] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8 [ 21.382931] device-mapper: uevent: version 1.0.3 [ 21.383167] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 22.051896] fuse init (API version 7.13) [ 22.480826] Bluetooth: Core ver 2.15 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#570097: mpi.h not found
Better to include: #include mpi/mpi.h Gerber -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#545830: libgpiv3: interrogation gives unrealistic results
Package: libgpiv3 Version: 0.6.1-2+b2 Severity: grave Justification: renders package unusable While performing interrogation with gpiv_rr (from the gpivtools package) or with Gpiv, the results on the testing image from the python-gpiv package gives completely unrealistic results. Probably caused by pointer deletion or memory overwriting while using the #pragma omp parallel for statement in gpiv_cp_pivdata. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.29-1-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libgpiv3 depends on: ii libc62.9-20 GNU C Library: Shared libraries ii libfftw3-3 3.2.1-2.1 library for computing Fast Fourier ii libglib2.0-0 2.20.4-1The GLib library of C routines ii libgomp1 4.4.1-3 GCC OpenMP (GOMP) support library ii libgpiv3-common 0.6.1-2+b1 library for Particle Image Velocim ii libgsl0ldbl 1.12+dfsg-1 GNU Scientific Library (GSL) -- li ii libhdf5-serial-1.8.3 [libhdf 1.8.3-2.1 Hierarchical Data Format 5 (HDF5) ii libpng12-0 1.2.39-1PNG library - runtime libgpiv3 recommends no packages. libgpiv3 suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#539717: gpivtools-mpi: formating suggestions for long description
Thanks for your suggestion. I will include it in the next package release. On Mon, 2009-08-03 at 10:13 +0200, Gerfried Fuchs wrote: Package: gpivtools-mpi Version: 0.6.0-1 Severity: minor Hi! The long description of your package could need some formating improvements. I suggest you to apply this pseudo-patch: #v+ Description: command line programs for Particle Image Velocimetry - MPI version A collection of programs for images that are generated during a Particle Image Velocimetry (PIV) experiment. This is a technique to obtain the velocity field of a fluid flow quantitatively and is performed by tracking tracer particles that have been seeded to a fluid. The technique is also applied for observing deformations at surfaces of (solid) bodies. The package contains: - . - an image processing program for typical filtering and manipulation - routines that may be convenient for PIV. - . - an image interrogation program resulting into estimators of particle - image displacements. - . - validation programs to test on outliers, peak-locking effect and - velocity gradients. - . - post-processing programs for data manipulation (flipping, rotation - etc), spatial and time scaling, calculation of spatial averages and - derivative quantities from the PIV data, like vorticity and strain. - . - miscellaneous programs and scripts to perform image format conversion, - batch-processing, pipeline processing (image evaluation, validation and - post-processing at once), calculation of time averages from a series - of PIV data sets, data-visualization and data-manipulation. + * an image processing program for typical filtering and manipulation +routines that may be convenient for PIV. + * an image interrogation program resulting into estimators of particle +image displacements. + * validation programs to test on outliers, peak-locking effect and +velocity gradients. + * post-processing programs for data manipulation (flipping, rotation +etc), spatial and time scaling, calculation of spatial averages and +derivative quantities from the PIV data, like vorticity and strain. + * miscellaneous programs and scripts to perform image format conversion, +batch-processing, pipeline processing (image evaluation, validation and +post-processing at once), calculation of time averages from a series +of PIV data sets, data-visualization and data-manipulation. . This package contains the MPI-parallelized programs for use on a (Beowulf) cluster. All programs start with gpiv_. #v- I.e. to form a proper list, indenting the bullets with two spaces and aligning the rest of the list items in their indention. This will help package description renderers like the one in aptitude to recognize it as a proper list and display it accordingly. So long, and thanks for your great work nevertheless! Rhonda -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#529994: gpiv_0.6.1-1(mips/unstable): FTBFS on mips. Missing builddependency ?
Please check the location of mpi.h on your system when having mpi-default-dev installed. It should be at /usr/include/mpi/mpi.h On Fri, 2009-05-22 at 20:52 +0300, Peter De Schrijver wrote: mpi-default-dev -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#528615: paraview-dev package?
Package: paraview Version: 3.4.0-3 Severity: wishlist Please, consider to build a paraview-dev package that contains the headers and needed CMake macro's etc. So OpenFOAM/FreeFOAM and other software can be build against this package and there is no need to build paraview locally. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-486 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages paraview depends on: ii libavcodec52 4:0.5+svn20090420-2 ffmpeg codec library ii libavformat524:0.5+svn20090420-2 ffmpeg file format library ii libavutil49 4:0.5+svn20090420-2 ffmpeg utility library ii libc62.9-12 GNU C Library: Shared libraries ii libgcc1 1:4.4.0-4 GCC support library ii libgl1-mesa-glx [lib 7.4.1-1 A free implementation of the OpenG ii libglu1-mesa [libglu 7.4.1-1 The OpenGL utility library (GLU) ii libhdf5-serial-1.6.6 1.6.6-4 Hierarchical Data Format 5 (HDF5) ii libice6 2:1.0.5-1 X11 Inter-Client Exchange library ii libopenmpi1 1.3-2 high performance message passing l ii libqt4-assistant 4.5.1-2 Qt 4 assistant module ii libqt4-dbus 4.5.1-2 Qt 4 D-Bus module ii libqt4-network 4.5.1-2 Qt 4 network module ii libqt4-sql 4.5.1-2 Qt 4 SQL module ii libqt4-xml 4.5.1-2 Qt 4 XML module ii libqtcore4 4.5.1-2 Qt 4 core module ii libqtgui44.5.1-2 Qt 4 GUI module ii libsm6 2:1.1.0-2 X11 Session Management library ii libstdc++6 4.4.0-4 The GNU Standard C++ Library v3 ii libswscale0 4:0.5+svn20090420-2 ffmpeg video scaling library ii libx11-6 2:1.2.1-1 X11 client-side library ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxt6 1:1.0.5-3 X11 toolkit intrinsics library ii python2.52.5.4-1 An interactive high-level object-o ii qt4-dev-tools4.5.1-2 Qt 4 development tools Versions of packages paraview recommends: ii mpi-default-bin 0.4Standard MPI runtime programs ii qt4-dev-tools 4.5.1-2Qt 4 development tools Versions of packages paraview suggests: pn h5utils none (no description available) pn hdf5-toolsnone (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#528640: paraview: doesn't build from deb package
Package: paraview
Version: 3.4.0-3
Severity: normal
After invoking apt-get source paraview and apt-get build-dep paraview
the building of the package fails by invoking debuild -us -uc. The output is
as follows:
= Start of output when building
dpkg-buildpackage -rfakeroot -D -us -uc
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CPPFLAGS to default value:
dpkg-buildpackage: set LDFLAGS to default value:
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: source package paraview
dpkg-buildpackage: source version 3.4.0-3
dpkg-buildpackage: source changed by Christophe Prud'homme prudh...@debian.org
dpkg-buildpackage: host architecture i386
fakeroot debian/rules clean
test -x debian/rules
rmdir obj-i486-linux-gnu
rmdir: failed to remove `obj-i486-linux-gnu': Directory not empty
make: [cleanbuilddir] Error 1 (ignored)
rm -rf obj-i486-linux-gnu
/usr/bin/make -C obj-i486-linux-gnu -k clean
make: *** obj-i486-linux-gnu: No such file or directory. Stop.
make: [makefile-clean] Error 2 (ignored)
rm -f debian/stamp-makefile-build
dh_clean
/usr/bin/make -f debian/rules reverse-config
make[1]: Entering directory `/home/gerber/src/PARAVIEW/paraview-3.4.0'
make[1]: Nothing to be done for `reverse-config'.
make[1]: Leaving directory `/home/gerber/src/PARAVIEW/paraview-3.4.0'
if [ -d . ]; then \
cd .
QUILT_PATCHES=/home/gerber/src/PARAVIEW/paraview-3.4.0/debian/patches quilt
--quiltrc /dev/null pop -a -R || test $? = 2 ; \
fi
Removing patch use-ffmpeg-swscaler.patch
Restoring VTK/IO/vtkFFMPEGWriter.cxx
Restoring VTK/IO/CMakeLists.txt
Restoring VTK/CMake/FindFFMPEG.cmake
Removing patch search-client-doc-finder-in-fhs-dir.patch
Restoring Applications/Client/MainWindow.cxx
Removing patch assistant-qt4.patch
Restoring Applications/Client/MainWindow.cxx
Removing patch vtkFFMPEGWriter.patch
Restoring VTK/IO/vtkFFMPEGWriter.cxx
No patches applied
rm -rf ./.pc
rm -f debian/stamp-patch*
dpkg-source -b paraview-3.4.0
dpkg-source: info: using source format `1.0'
dpkg-source: info: building paraview using existing paraview_3.4.0.orig.tar.gz
dpkg-source: info: building paraview in paraview_3.4.0-3.diff.gz
dpkg-source: info: building paraview in paraview_3.4.0-3.dsc
debian/rules build
test -x debian/rules
mkdir -p obj-i486-linux-gnu
/usr/bin/make -f debian/rules reverse-config
make[1]: Entering directory `/home/gerber/src/PARAVIEW/paraview-3.4.0'
make[1]: Nothing to be done for `reverse-config'.
make[1]: Leaving directory `/home/gerber/src/PARAVIEW/paraview-3.4.0'
cd . QUILT_PATCHES=/home/gerber/src/PARAVIEW/paraview-3.4.0/debian/patches
quilt --quiltrc /dev/null push -a || test $? = 2
Applying patch vtkFFMPEGWriter.patch
patching file Applications/Client/MainWindow.cxx
Applying patch search-client-doc-finder-in-fhs-dir.patch
patching file Applications/Client/MainWindow.cxx
Applying patch use-ffmpeg-swscaler.patch
patching file VTK/IO/vtkFFMPEGWriter.cxx
Hunk #2 succeeded at 241 (offset -4 lines).
Hunk #3 succeeded at 257 (offset -4 lines).
patching file VTK/CMake/FindFFMPEG.cmake
patching file VTK/IO/CMakeLists.txt
Hunk #1 succeeded at 242 (offset 9 lines).
Now at patch use-ffmpeg-swscaler.patch
touch debian/stamp-patched
/usr/bin/make -f debian/rules update-config
make[1]: Entering directory `/home/gerber/src/PARAVIEW/paraview-3.4.0'
make[1]: Nothing to be done for `update-config'.
make[1]: Leaving directory `/home/gerber/src/PARAVIEW/paraview-3.4.0'
cd obj-i486-linux-gnu cmake /home/gerber/src/PARAVIEW/paraview-3.4.0/.
-DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_C_COMPILER:FILEPATH=cc
-DCMAKE_CXX_COMPILER:FILEPATH=g++ -DCMAKE_C_FLAGS=-g -O2 -g -Wall -O2
-DCMAKE_CXX_FLAGS=-g -O2 -g -Wall -O2 -DCMAKE_SKIP_RPATH=ON
-DCMAKE_VERBOSE_MAKEFILE=ON -DBUILD_DOCUMENTATION=ON
-DDOCUMENTATION_HTML_HELP=ON -DBUILD_EXAMPLES=ON -DBUILD_SHARED_LIBS=ON
-DVTK_USE_RPATH=ON -DCMAKE_INSTALL_RPATH=/usr/lib/paraview
-DCMAKE_INSTALL_RPATH_USE_LINK_PATH=ON -DBUILD_TESTING=OFF
-DVTK_USE_MPEG2_ENCODER=OFF -DVTK_USE_FFMPEG_ENCODER=ON
-DFFMPEG_INCLUDE_DIR=/usr/include/ffmpeg -DPARAVIEW_USE_MPI=ON
-DPARAVIEW_USE_SYSTEM_HDF5=ON -DHDF5_ENABLE_PARALLEL=ON
-DPARAVIEW_ENABLE_PYTHON=ON -DCMAKE_VERBOSE_MAKEFILE=OFF -DCMAKE_C_FLAGS=-O2
-fPIC -DCMAKE_CXX_FLAGS=-O2 -fPIC -DMPI_LIBRARY=/usr/lib/libmpi.so
-DMPI_EXTRA_LIBRARY=/usr/lib/libmpi++.so -DMPI_INCLUDE_PATH=/usr/include/mpi
-DPYTHON_EXECUTABLE=/usr/bin/python2.5 -DPV_INSTALL_LIB_DIR=${PV_INST
ALL_ROOT}/lib/paraview
-DPV_INSTALL_INCLUDE_DIR=${PV_INSTALL_ROOT}/include/paraview
-- The C compiler identification is GNU
-- The CXX compiler identification is GNU
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/g++
-- Check for working CXX compiler: /usr/bin/g++ -- works
-- Detecting CXX compiler
Bug#515789: not free: so lost interests
As upstream authors of this package did not reply on any request for distribition within Debian and licencing is unclear but definitely not free, I have lost interests in packaging this software. Therefore this bug may be removed. Gerber -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#528662: ITP: freefoam -- freefoam software package for Computational Fluid Dynamics (CFD).
Package: wnpp Severity: wishlist Owner: Gerber van der Graaf gerber.vdgr...@gmail.com * Package name: freefoam Version : 0.1.0 Upstream Author : Michael Wild them...@users.sourceforge.net * URL : http://www.freefoam.wiki.sourceforge.net * License : GPL Programming Lang: C++ Description : software for Computational Fluid Dynamics (CFD) FreeFOAM is a fork of the OpenFOAM CFD software package, containing more than 200 programs for pre-processing, simulation and for post-processing. Therefore it uses the control volume method or finite difference scheme. The software can simulate anything from complex fluid flows involving chemical reactions, turbulence and heat transfer, to solid dynamics, electromagnetics and the pricing of financial options. .. Compared to OpenFOAM, the building system has been modified to CMake, will also compile and run on case-insensitive file systems and installs configuration, libraries, headers and binaries following LSB standards. Its use won´ require specific ENVIRONMENTAL settings or has been reduced to a minimum. So all programs will work like any other available binary on the Computer system. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#524025: libgpiv-mpi3: unable to upgrade
Package: libgpiv-mpi3 Version: 0.6.1-1 Severity: normal When an older deb release has been installed on i the system and the current libgpiv3 or libgpiv-mpi3 will be installed, dpkg reports: unable to install libgpiv-common as libgpiv3 already installs /etc/gpiv.conf Probably the bug can be repaired by including a 'conflict' and 'replaces' into debian/control for the libgpiv3-common package. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages libgpiv-mpi3 depends on: ii libc62.9-6 GNU C Library: Shared libraries ii libfftw3-3 3.1.2-3.1 library for computing Fast Fourier ii libglib2.0-0 2.20.0-2The GLib library of C routines ii libgomp1 4.3.3-7 GCC OpenMP (GOMP) support library ii libgpiv3-common 0.6.1-1 library for Particle Image Velocim ii libgsl0ldbl 1.12+dfsg-1 GNU Scientific Library (GSL) -- li ii libhdf5-serial-1.6.6-0 [libh 1.6.6-4 Hierarchical Data Format 5 (HDF5) ii libopenmpi1 1.3-2 high performance message passing l ii libpng12-0 1.2.35-1PNG library - runtime libgpiv-mpi3 recommends no packages. libgpiv-mpi3 suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#523010: gpiv: crashes with assertion error on opening PNG
I think your patch repair is correct and I implemented it in the gpiv package. The update can be found in the http://repo.or.cz/w/gpiv.git repository. Hopefully within one or two weeks the newest gpiv release, including your bugrepair, can also be found in the officiel Debian repo. Thanks a lot for your contribution! BTW I'd like to know for which purpose the Gpiv software is used. Would you like to send me a short description or a Web link? If you'd like to, this might be included in the Gpiv web pages http://gpiv.sourceforge.net/projects.html Greetings, Gerber On Tue, 2009-04-07 at 22:25 +0200, Adrian Daerr wrote: Package: gpiv Version: 0.5.2-3 Severity: important Tags: patch *** Please type your report below this line *** When opening a png image (generated in my case by gpiv_combing from gpiv_tools, but bug probably generic), gpiv aborts with the following error message: GdkPixbuf-CRITICAL **: gdk_pixbuf_get_rowstride: assertion `GDK_IS_PIXBUF (pixbuf)' failed GLib-ERROR **: /build/buildd-glib2.0_2.20.0-2-i386-rcJiVy/glib2.0-2.20.0/glib/g$ failed to allocate 4294967040 bytes aborting... Program received signal SIGABRT, Aborted. Running gdb reveals that the failing malloc call in display_image.c:84 (or display_image.c:122) uses the return value from the failed preceding gdk_pixbuf_get_rowstride() call. This call is made on a GdkPixbuf object px which has ref-count zero at that time, i.e. has been freed... Suggested patch: delay the gdk_pixbuf_unref (px) call (display_image.c:73) until px is no longer needed. The following diff -u can be used for this: $ diff -u gpiv-0.6.0*/src/display_image.c --- gpiv-0.6.0.orig/src/display_image.c 2007-12-14 12:54:24.0 +0100 +++ gpiv-0.6.0/src/display_image.c 2009-04-07 20:02:26.0 +0200 @@ -73,8 +73,6 @@ disp-img-image-header-ncolumns, disp-img-image-header-nrows); -gdk_pixbuf_unref (px); - #ifdef DEBUG g_message(create_img:: rowstride = %d, rgb_img_width = %d, gdk_pixbuf_get_rowstride(px), @@ -164,6 +162,8 @@ disp-img-gci_img2 = disp-img-gci_img1; } +gdk_pixbuf_unref (px); + /* g_message(:: freeing rgbbuf_img1/2); */ /* g_free(disp-img-rgbbuf_img1); */ /* disp-img-rgbbuf_img1 = NULL; */ nb: I have no experience in GTK prgramming, possibly this bug requires more code overhaul than just this patch ? -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gpiv depends on: ii libart-2.0-2 2.3.20-2 Library of functions for 2D graphi ii libatk1.0-01.24.0-2 The ATK accessibility toolkit ii libbonobo2-0 2.24.1-1 Bonobo CORBA interfaces library ii libbonoboui2-0 2.24.1-1 The Bonobo UI library ii libc6 2.9-6 GNU C Library: Shared libraries ii libcairo2 1.8.6-2+b1The Cairo 2D vector graphics libra ii libfftw3-3 3.1.2-3.1 library for computing Fast Fourier ii libgconf2-42.24.0-7 GNOME configuration database syste ii libglib2.0-0 2.20.0-2 The GLib library of C routines ii libgnome2-02.24.1-2 The GNOME 2 library - runtime file ii libglib2.0-0 2.20.0-2 The GLib library of C routines ii libgnome2-02.24.1-2 The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.20.1.1-1A powerful object-oriented display ii libgnomeprint2.2-0 2.18.6-1 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.18.4-1 GNOME 2.2 print architecture User ii libgnomeui-0 2.24.1-1 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 1:2.24.0-3GNOME Virtual File System (runtime ii libgpiv3 0.6.1-1 library for Particle Image Velocim ii libgsl0ldbl1.12+dfsg-1 GNU Scientific Library (GSL) -- li ii libgtk2.0-02.14.7-5 The GTK+ graphical user interface ii libice62:1.0.5-1 X11 Inter-Client Exchange library ii liborbit2 1:2.14.17-0.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.24.0-2 Layout and rendering of internatio ii libpopt0 1.14-4lib for parsing cmdline parameters ii libsm6 2:1.1.0-2 X11 Session Management library ii libxml22.7.3.dfsg-1 GNOME XML library ii zlib1g 1:1.2.3.3.dfsg-13 compression library -
Bug#521221: libhdf5-openmpi-1.6.6-0: simultaneous installation of -serial and -mpi packages
Package: libhdf5-openmpi-1.6.6-0 Version: 1.6.6-4 Severity: wishlist === Consider simultaneous installation of serial and parallelized (-mpi) packages. So the needed library will be choosen by the application. This will give more flexibility as applications that need the serial version can abe installed on the same system with applications that need the -mpi version. (Similar as has been done by libgpiv3 and libgpiv-mpi3.) -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages libhdf5-openmpi-1.6.6-0 depends on: ii libc6 2.9-4 GNU C Library: Shared libraries ii libopenmpi11.3-2 high performance message passing l ii zlib1g 1:1.2.3.3.dfsg-13 compression library - runtime libhdf5-openmpi-1.6.6-0 recommends no packages. libhdf5-openmpi-1.6.6-0 suggests no packages. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#515789: ITP: mgridgen(-mpi) -- Program for generating course grids
Package: wnpp Severity: wishlist Owner: Gerber van der Graaf gerber.vdgr...@gmail.com * Package name: mgridgen(-mpi) Version : 1.0.0 Upstream Author : Irene Moulitsas mouli...@cs.umn.edu * URL : http://www.cs.umn.edu/~moulitsa/software.html * License : (Unspecified, I will contact upstream authors for (GNU) licence agreement and permission of distribution in Debian) Programming Lang: (C) Description : Program for generating course grids MGRIDGEN and PARMGRIDGEN are serial and parallel software packages that implement various algorithms for generating a sequence of coarse grids. The generated coarse grids contain well-shaped elements and thus they are well-suited for geometric multigrid methods. PARMGRIDGEN is an MPI-based parallel library that is based on the serial package MGRIDGEN and it is suited for parallel numerical simulations involving large unstructured grids since the algorithms incur a very small communication overhead, achieve high degree of concurrency and maintain the high quality of the coarse grids obtained by the serial algorithms in the MGRIDGEN library. -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#515579: libhdf5-openmpi-dev: mpi.h and mpio.h are not found
Package: libhdf5-openmpi-dev Version: 1.6.6-4 Severity: important When compiling software against libhdf5-openmpi-dev the headers mpi.h and mpio.h are not found from /usr/include/H5public.h. It seems that mpi.h is present at /usr/include/mpi/mpi.h, so /usr/include/H5public.h should be changed from: #include mpi.h to: #include mpi/mpi.h, while mpio.h is not present at all. -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libhdf5-openmpi-dev depends on: ii libc6-dev 2.7-18GNU C Library: Development Librari ii libhdf5-openmpi-1.6.6- 1.6.6-4 Hierarchical Data Format 5 (HDF5) ii libjpeg62-dev 6b-14 Development files for the IJG JPEG ii libopenmpi-dev 1.3-2 high performance message passing l ii zlib1g-dev 1:1.2.3.3.dfsg-12 compression library - development libhdf5-openmpi-dev recommends no packages. Versions of packages libhdf5-openmpi-dev suggests: pn libhdf5-doc none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#514327: RFP: openfoam -- OpenFOAM-1.5 debian package
In case you did not see the message I also sent to 514...@bugs.debian.org and you might be interested. We hope to issue next week. There is a 'fork' of OpenFoam: FreeFoam (http://sourceforge.net/projects/freefoam/), done by Michael Wild and me. The changes are in the building (using CMake), installation using LSB: (/usr/lib/FreeFoam/*, /usr/bin/* , /etc/FreeFoam), and usage (no ENVIRONMENTAL settings needed. It seems to work fine, but we are still testing it. I already have had a look at Paraview and cdbs technology (which is new to me) how I might be able to deb FreeFoam. The files have not yet been uploaded to sf.net or at the repo.or.cz git repository. Michael asked me to wait with publishing the software (he holds the sf account) It has been 1 month I had the last contact with Michael and he did not respond last week. I will try again and eventually issue FreeFoam on the git repository. Gerber -- Gerber van der Graaf http://gpiv.sourceforge.net GnuPG key fingerprint: BF0A BBFE 5623 9761 C9E1 7C82 8B08 F586 D39A 2B64 signature.asc Description: This is a digitally signed message part
Bug#514328: [Pkg-scicomp-devel] Bug#514328: Bug#514328: OpenFOAM-1.5 patch for paraview-3.4.0
There is a 'fork' of OpenFoam: FreeFoam (http://sourceforge.net/projects/freefoam/), done by Michael Wild and me. The changes are in the building (using CMake), installation (/usr/lib/FreeFoam, /usr/bin/ff_* , /etc/FreeFoam) and usage (no ENVIRONMENTAL settings. It seems to work fine, but we are still testing it. I already have had a look at Paraview and cdbs technology (which is new to me) how I might be able to deb FreeFoam. The files have not yet been uploaded to sf.net or at the repo.or.cz git repository. Michael asked me to wait with publishing the software (he holds the sf account) It has been 1 month I had the last contact with Michael and he did not respond last week. I will try again and eventually issue FreeFoam on the git repository. Gerber On Sat, 2009-02-07 at 12:14 -0600, Jordi Gutiérrez Hermoso wrote: 2009/2/7 Ondrej Certik ond...@certik.cz: https://launchpad.net/%7Eoli-borm/+archive/ppa/+files/paraview_3.4.0-2~ppa3~intrepid1.dsc I've briefly glanced in the past at OpenFOAM packaging, and decided that it would be a huge task, mostly because coaxing OpenFOAM to obey Debian and Ubuntu policy is going to be a very difficult task. Besides having a very arcane build system and being a monster package, it also has some very weird usage expecting to be run under its own user with many environment variables set. How did you address those issues? ___ Pkg-scicomp-devel mailing list pkg-scicomp-de...@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/pkg-scicomp-devel -- Gerber van der Graaf GnuPG key fingerprint: BF0A BBFE 5623 9761 C9E1 7C82 8B08 F586 D39A 2B64 http://gpiv.sourceforge.net/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#507894: ITP: python-gpiv -- wrapper of libgpiv
Package: wnpp Severity: wishlist Owner: Gerber van der Graaf [EMAIL PROTECTED] * Package name: python-gpiv Version : 1.0.0 Upstream Author : Gerber van der Graaf [EMAIL PROTECTED] * URL : http://libgpiv.sourceforge.net/pygpiv.html * License : GPL Programming Lang: Python Description : wrapper of libgpiv This module allows the functionality of libgpiv in Python scripts to quick develop programs for Particle Image Velocimetry (PIV). -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#507895: ITP: python-gpiv -- wrapper of libgpiv
Package: wnpp Severity: wishlist Owner: Gerber van der Graaf [EMAIL PROTECTED] * Package name: python-gpiv Version : 1.0.0 Upstream Author : Gerber van der Graaf [EMAIL PROTECTED] * URL : http://libgpiv.sourceforge.net/pygpiv.html * License : GPL Programming Lang: Python Description : wrapper of libgpiv This module allows the functionality of libgpiv in Python scripts to quick develop programs for Particle Image Velocimetry (PIV). -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#489201: libgpiv3: gpiv.conf
Package: libgpiv3 Severity: normal gpiv.conf not loaded if ~/.gpivrc is absent -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-6-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#354150: Subject: ITP: libgpiv -- Library for Particle Image Velocimetry (PIV)
Package: wnpp Owner: Gerber van der Graaf [EMAIL PROTECTED] Severity: wishlist *** Please type your report below this line *** * Package name: libgpiv Version : 0.3.2 Upstream Author : Gerber van der Graaf [EMAIL PROTECTED] * URL : http://gpiv.sourceforge.net/ * License : GPL Description : Library for Particle Image Velocimetry (PIV) This library contains functions for evaluating images from a fluid flow by means of Particle Image Velocimetry (PIV), resulting into a velocity field on a rectangular grid. It includes the core functions for image acquiring, processing, interrogation, PIV data validation, post-processing, input/output and memory allocation. -- System Information: Debian Release: 3.1 Architecture: i386 (i686) Kernel: Linux 2.6.8-2-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) I have package this library and two others that make use of it; gpivtools; a package containing more than 40 command-line programs and scripts and gpiv; a GTK/Gnome GUI program. As upstream author of the package I noticed that compiling and installing of the software by users seems to be an obstacle to use this software. Therefore I am very interested in providing (and maintaining) the binary package. The motivation fo rchoosing Debian is because I am convinced that Debian is the most reliable GNU/Linux distro available, regarding from a technological point of view and, most of all, because of its open-source and open-minded policy, without depending on corporate interests. Besides, I just enjoy it. -- Gerber van der Graaf Main developer of Gpiv: Open Source Software for Particle Image Velocimetry http://gpiv.sourceforge.net pnupg key id: ID D39A2B64 signature.asc Description: This is a digitally signed message part
Bug#354152: Subject: ITP: gpivtools --Command line programs for Particle Image Velocimetry
Package: wnpp Owner: Gerber van der Graaf [EMAIL PROTECTED] Severity: wishlist Version: 0.3.2-1 Upstream Author: Gerber van der Graaf [EMAIL PROTECTED] * URL : http://gpiv.sourceforge.net/ * License : GPL Description : Command line programs for Particle Image Velocimetry A collection of programs for recording and interrogating images that are generated during a Particle Image Velocimetry (PIV) experiment. This is a technique to obtain the velocity field of a fluid flow quantitatively and is performed by tracking tracer particles that have been seeded to a fluid. The technique is also applied for observing deformations at surfaces of (solid) bodies. The package contains: . an image recording program that uses an IEEE1394 (Firewire) IIDC-compliant camera and a program for triggering the camera with a light source (mostly a double cavity Nd-YAG laser). Trigger pulses are sent over the parallel port of the computer using RealTimeLinux and RTAI. . an image processing program for typical filtering and manipulation routines that may be convenient for PIV. . an image interrogation program resulting into estimators of particle image displacements. . validation programs to test on outliers, peak-locking effect and velocity gradients. . post-processing programs for data manipulation (flipping, rotation etc), spatial and time scaling, calculation of spatial averages and derivatived quantities from the PIV data, like vorticity and strain. . miscelaneous programs and scripts to perform image format conversion, batch-processing, pipeline processing (image evaluation, validation and post-processing at once), calculation of time averages from a series of PIV data sets, data-visualization and data-manipulation. -- System Information: Debian Release: 3.1 Architecture: i386 (i686) Kernel: Linux 2.6.8-2-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) I packaged this software together with the belonging libgpiv package and an additional GTK/Gnome GUI program gpiv. As upstream author a am interested to build and maintain the package. Of course, help and comments are welcome. -- Gerber van der Graaf Main developer of Gpiv: Open Source Software for Particle Image Velocimetry http://gpiv.sourceforge.net pnupg key id: ID D39A2B64 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#354155: Subject: ITP: gpiv --Graphic User Interface program for Particle Image Velocimetry
Package: wnpp Owner: Gerber van der Graaf [EMAIL PROTECTED] Severity: wishlist Package : gpiv Version : 0.3.0-1 Upstream Author : Gerber van der Graaf [EMAIL PROTECTED] URL : http://gpiv.sourceforge.net/ License : GPL Description : Graphic User Interface program for Particle Image Velocimetry Gpiv is a program using the the GTK/GNOME libraries for Particle Image Velocimetry (PIV). The program gives a quick overview of the parameter settings of the processes and allows to change them easely, running the processes, individually or in a chain, visualizes and displays the results. The processes that may be invoked by Gpiv are: . Image recording and triggering of a camera with light sources. . Image evaluation or interrogation, resulting into estimators of particle image displacements. . Data validation to test on outliers, peak-locking effect and velocity gradients over the interrogation area's. . Data post-processing: data manipulation,spatial and time scaling to obtain a velocity field from the PIV data, calculation of spatial averages, vorticity and strain. This is the GUI program that uses also the libgpiv package. Another package (gpivtools) includes (small) command-line programs and scripts with similar functionality as this package. As a starter in packaging I would like to be commented by a DD! -- Gerber van der Graaf Main developer of Gpiv: Open Source Software for Particle Image Velocimetry http://gpiv.sourceforge.net pnupg key id: ID D39A2B64 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
