Bug#593013: installation-reports: No common CD-ROM drive detected
Package: installation-reports Severity: critical Justification: breaks the whole system -- Package-specific info: Boot method: CD Image version: debian-testing-sparc-CD-1.iso, 8-9-10 build Date: 08-14-10 Machine: Sun Ultra 10 Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [0] Detect network card:[ ] Configure network: [ ] Detect CD: [E] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [ ] User/password setup:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: At the “Detect and mount CD-ROM” stage the installation failed. The error message was “No common CD_ROM drive was detected.” It suggested loading additional drivers from removable media. Actually, in ”/dev”, no IDE or ATAPI devices showed up. So the Hard disk was also not recognized. The last “testing” build that I was able to install was 07-05-10, which also had problems, but at least the IDE devices were detected. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=5.0 (lenny) - installer build 20090123lenny6 X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == umame -a: Linux athlon 2.6.26-2-486 #1 Sat Dec 26 08:37:39 UTC 2009 i686 unknown lspci -knn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] [1106:0305] (rev 02) lspci -knn: 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] [1106:8305] lspci -knn: 00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 22) lspci -knn: Kernel driver in use: parport_pc lspci -knn: Kernel modules: parport_pc lspci -knn: 00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 10) lspci -knn: Kernel driver in use: VIA_IDE lspci -knn: Kernel modules: via82cxxx lspci -knn: 00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 10) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:07.3 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 10) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:07.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 30) lspci -knn: 00:08.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 08) lspci -knn: 00:08.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 08) lspci -knn: 00:0b.0 Ethernet controller [0200]: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 [1317:0985] (rev 11) lspci -knn: Kernel driver in use: tulip lspci -knn: Kernel modules: tulip lspci -knn: 00:0f.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor [168c:0013] (rev 01) lspci -knn: Kernel driver in use: ath5k_pci lspci -knn: Kernel modules: ath5k lspci -knn: 00:13.0 Mass storage controller [0180]: HighPoint Technologies, Inc. HPT366/368/370/370A/372/372N [1103:0004] (rev 03) lspci -knn: Kernel driver in use: HPT366_IDE lspci -knn: Kernel modules: hpt366 lspci -knn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] lsmod: Module Size Used by lsmod: ufs63620 0 lsmod: qnx47684 0 lsmod: ntfs 180544 0 lsmod: dm_mod 45384 0 lsmod: md_mod 65940 0 lsmod: xfs 446836 0 lsmod: reiserfs 187264 0 lsmod: jfs 148188 0 lsmod: ext3 103688 1 lsmod: jbd35092 1 ext3 lsmod: vfat8832 0 lsmod: fat39964 1 vfat lsmod: ext2 52744 0 lsmod: mbcache 6656 2 ext3,ext2 lsmod: arc41792 2 lsmod: ecb 2560 2 lsmod: crypto_blkcipher 14724 1 ecb lsmod: ath5k 87424 0 lsmod: mac80211 137756 1 ath5k lsmod: cfg80211
Bug#593054: installation-reports: Inconsistent partition naming during boot
Package: installation-reports Severity: normal -- Package-specific info: Boot method: CD Image version: debian-testing-sparc-CD-1.iso, 7-5-10 build date. Date: 7-11-10 Machine: Sun Ultra 10 Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [0] Detect network card:[0] Configure network: [ ] Detect CD: [0] Load installer modules: [0] Detect hard drives: [0] Partition hard drives: [E] Install base system:[0] Clock/timezone setup: [0] User/password setup:[0] Install tasks: [0] Install boot loader:[0] Overall install:[E] Comments/Problems: linux-image-2.6.32-5-sparc64 was selected for installation. System would not reboot. It ended up in openboot at the “ok” prompt. Last message was “Fast Data Access MMU Miss” (WOW. This STILL has not been fixed). I assumed this was the same problem as with the 02-08-2010 build. The problem was ameliorated then in terms of “fixing” bugs(569719, related = 565639 562594). Did so again: Did rescue into an installer shell within hda2. chroot /target mount /dev/hda1 /boot silo -u -f Then attempted to reboot. The boot process could not find “/dev/hda2” for root. It had been renamed “/dev/sda2” in the boot environment. But it was still /dev/hda2 on the disk. I changed hda2 to sda2 in /boot/silo.conf . This allowed the boot sequence to complete. Now I am left with disk partitions named sda* instead of hda*. What is up with this? Are we changing naming conventions? Will this inconsistency be fixed? Thanks. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=5.0 (lenny) - installer build 20090123lenny6 X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == umame -a: Linux athlon 2.6.26-2-486 #1 Sat Dec 26 08:37:39 UTC 2009 i686 unknown lspci -knn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] [1106:0305] (rev 02) lspci -knn: 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] [1106:8305] lspci -knn: 00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 22) lspci -knn: Kernel driver in use: parport_pc lspci -knn: Kernel modules: parport_pc lspci -knn: 00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 10) lspci -knn: Kernel driver in use: VIA_IDE lspci -knn: Kernel modules: via82cxxx lspci -knn: 00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 10) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:07.3 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 10) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:07.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 30) lspci -knn: 00:08.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 08) lspci -knn: 00:08.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 08) lspci -knn: 00:0b.0 Ethernet controller [0200]: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 [1317:0985] (rev 11) lspci -knn: Kernel driver in use: tulip lspci -knn: Kernel modules: tulip lspci -knn: 00:0f.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor [168c:0013] (rev 01) lspci -knn: Kernel driver in use: ath5k_pci lspci -knn: Kernel modules: ath5k lspci -knn: 00:13.0 Mass storage controller [0180]: HighPoint Technologies, Inc. HPT366/368/370/370A/372/372N [1103:0004] (rev 03) lspci -knn: Kernel driver in use: HPT366_IDE lspci -knn: Kernel modules: hpt366 lspci -knn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] lsmod: Module Size Used by lsmod: ufs63620 0 lsmod: qnx47684 0 lsmod: ntfs 180544 0 lsmod: dm_mod 45384 0 lsmod: md_mod 65940 0 lsmod: xfs 446836 0 lsmod: reiserfs 187264 0 lsmod: jfs 148188 0 lsmod: ext3 103688