Bug#934974: u-boot: usb start fails on sheevaplug in u-boot 2019.01
Am 05.09.2019 um 18:20 schrieb Vagrant Cascadian: On 2019-09-04, Martin Michlmayr wrote: * Jan Hahne [2019-08-17 16:27]: But the command "usb start" gave me these errors: EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008c80 ERROR: NOT USB_CONFIG_DESC 8f 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found You mention USB problems. We just got a report that said that MMC and TFTP (network) didn't work either: https://lists.debian.org/debian-arm/2019/09/msg2.html Did you try those? If so, I assume those failed for you as well? Yes, I also tried TFTP and MMC. Same behaviour as described by Florian: TFTP and MMC fail. @Florian: I don't think that your SheevaPlug is bricked. I was able to unbrick mine with these instructions: https://www.newit.co.uk/forum/index.php/topic,2835.0.html https://tadeubento.com/2018/sheevaplug-2018-unbrick/ Then I followed the instructions by Martin Michlmayr http://www.cyrius.com/debian/kirkwood/sheevaplug/uboot-upgrade/ to install an older U-Boot Version (2016.11). The timestamp of this U-Boot-binary was 2018/11/07. I downloaded it from an older version of Martin's page. I just saw that Martin already has updated his page so you can download an older working U-Boot from there - Thanks a lot, Martin! @Florian: Good look with the unbricking procedure. It is a bit cumbersome but worked for me. Greetings to all of you Jan Really unfortunate to hear that it's not working in a stable released version... Thanks for the report. There are no records of successful u-boot tests on sheevaplug on the status page: https://wiki.debian.org/U-boot/Status So I have no idea how long any of these features have been broken. I don't have either the hardware or time to test every "supported" board in Debian's u-boot packages. Any chance people could also test the 2019.07 packages in experimental? I can also try to prepare some 2019.10~rc+ packages which I hope to upload soon. Thanks for helping test! live well, vagrant
Bug#934974: u-boot: usb start fails on sheevaplug in u-boot 2019.01
Source: u-boot Version: 2019.01 Severity: important Dear Maintainer, I have a SheevaPlug (Original Version From NewIT). I installed u-boot (version 2019.01) as described here: http://www.cyrius.com/debian/kirkwood/sheevaplug/uboot-upgrade/ After the installation I wanted to run the installer from an USB stick: http://www.cyrius.com/debian/kirkwood/sheevaplug/install/ But the command "usb start" gave me these errors: EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008c80 ERROR: NOT USB_CONFIG_DESC 8f 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found I was able to get the SheevaPlug working again using this guide: https://tadeubento.com/2018/sheevaplug-2018-unbrick/ I installed a previous u-boot version 2016.11. With this versÃon everything was OK. I was able to run the actual Debian installer and the installation was successfull without any errors. So I think there is a bug in u-boot, version 2019.01 -- System Information: Debian Release: 10.0 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: armel (armv5tel) Kernel: Linux 4.19.0-5-marvell Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled
