Bug#415617: installation-report: Digital Personal Workstation 500a
On Tuesday 20 March 2007 22:19, you wrote: On Saturday 20 March 2027 20:31, Peter Van Loock wrote: Comments/Problems: I tried the netboot, the businesscard and the xfce iso from Are you sure you mean the net_boot_ image here or are you talking about the net_inst_ CD? http://cdimage.debian.org/cdimage/etch-di-rc2/alpha/iso-cd and they all booted with the same error (I even tried burning to different discs and with different burn-speed). After loading the kernel and the initrd, an endless list of messages (all the same) scroll by: ram0: rw=0, want=33282, limit=32768 Attempt to access beyond end of device We discovered this issue yesterday too and it has already been fixed in the CD build scripts. The current _daily_ images should already be OK and so will the official Etch images be. It would be great if you could check this. Cheers, FJP I downloaded and burned the daily net_inst CD of 2007/03/20 this morning. Just now I booted with this CD and the installer started as it should. Installation succeeded without any problems whatsoever (I did not file another installation report). Regards, Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#415599: installation-report: SUN Ultra 10
Package: installation-reports Version: 2.29 Severity: normal -- Package-specific info: Boot method: CD Image version: http://cdimage.debian.org/cdimage/etch-di-rc2/sparc/iso-cd/debian-testing-sparc-businesscard.iso Date: 2007/03/20 17h00 Machine: SUN Ultra 10 Partitions: Disk /dev/hda (Sun disk label): 255 heads, 63 sectors, 1108 cylinders Units = cylinders of 16065 * 512 bytes Device FlagStart EndBlocks Id System /dev/hda1 012 963901 Boot /dev/hda212 1053 8361832+ 83 Linux native /dev/hda3 0 1108 89000105 Whole disk /dev/hda4 1053 1108441787+ 82 Linux swap Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: Because of the 2 video-cards in the machine, I had to boot the installer with the option video=atyfb:off. This was clearly documented in the installation manual. No problems encountered during the install. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=4.0 (installer build 20070308) X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == umame -a: Linux sun-ultra10 2.6.18-4-sparc64 #1 Wed Feb 21 16:19:25 UTC 2007 sparc64 unknown lspci -nn: 00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIi [108e:a000] lspci -nn: 00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -nn: 00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -nn: 01:01.0 Bridge [0680]: Sun Microsystems Computer Corp. EBUS [108e:1000] (rev 01) lspci -nn: 01:01.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. Happy Meal [108e:1001] (rev 01) lspci -nn: 01:02.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage Pro 215GP [1002:4750] (rev 5c) lspci -nn: 01:03.0 IDE interface [0101]: Silicon Image, Inc. PCI0646 [1095:0646] (rev 03) lspci -vnn: 00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIi [108e:a000] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 40 lspci -vnn: lspci -vnn: 00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64 lspci -vnn: Bus: primary=00, secondary=02, subordinate=ff, sec-latency=64 lspci -vnn: I/O behind bridge: -0fff lspci -vnn: Memory behind bridge: -000f lspci -vnn: Prefetchable memory behind bridge: -000f lspci -vnn: lspci -vnn: 00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64 lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 lspci -vnn: I/O behind bridge: -0fff lspci -vnn: Memory behind bridge: -000f lspci -vnn: Prefetchable memory behind bridge: -000f lspci -vnn: lspci -vnn: 01:01.0 Bridge [0680]: Sun Microsystems Computer Corp. EBUS [108e:1000] (rev 01) lspci -vnn: Flags: bus master, medium devsel, latency 80 lspci -vnn: Memory at 1fff000 (32-bit, non-prefetchable) [size=16M] lspci -vnn: Memory at 1fff100 (32-bit, non-prefetchable) [size=8M] lspci -vnn: Expansion ROM at 1ffe300 [disabled] [size=16M] lspci -vnn: lspci -vnn: 01:01.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. Happy Meal [108e:1001] (rev 01) lspci -vnn: Flags: bus master, medium devsel, latency 80, IRQ 12 lspci -vnn: Memory at 1ffe000 (32-bit, non-prefetchable) [size=32K] lspci -vnn: Expansion ROM at 1ffe400 [disabled] [size=16M] lspci -vnn: lspci -vnn: 01:02.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage Pro 215GP [1002:4750] (rev 5c) lspci -vnn: Flags: bus master, stepping, medium devsel, latency 64, IRQ 13 lspci -vnn: Memory at 1ffe100 (32-bit, non-prefetchable) [size=16M] lspci -vnn: I/O ports at 1fe02c00400 [size=256]
Bug#415463: installation-report: HP Workstation 712/60
Package: installation-reports Version: 2.29 Severity: normal -- Package-specific info: Boot method: Network Image version: http://ftp.nl.debian.org/debian/dists/testing/main/installer-hppa/rc2/images/netboot/2.6/boot.img Date: 2007/03/19 18h00 Machine: HP Workstation 712/60 Partitions: Disk /dev/sda: 1050 MB, 1050347520 bytes 255 heads, 63 sectors/track, 127 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 4 32098+ f0 Linux/PA-RISC boot /dev/sda2 5 14 80325 83 Linux /dev/sda3 15 127 907672+ 5 Extended /dev/sda5 * 15 114 803218+ 83 Linux /dev/sda6 115 127 104391 82 Linux swap / Solaris Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: No problems encountered during the install. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=4.0 (installer build 20070308) X_INSTALLATION_MEDIUM=netboot == Installer hardware-summary: == umame -a: Linux parisc 2.6.18-4-parisc #1 Wed Feb 21 07:41:17 MST 2007 parisc unknown lsmod: Module Size Used by lsmod: ext3 169032 1 lsmod: jbd70664 1 ext3 lsmod: zalon7xx 36460 0 lsmod: sd_mod 24112 4 lsmod: lasi700 3840 3 lsmod: 53c700 34696 1 lasi700 lsmod: scsi_transport_spi 32160 2 zalon7xx,53c700 lsmod: scsi_mod 161296 5 zalon7xx,sd_mod,lasi700,53c700,scsi_transport_spi lsmod: isofs 41624 0 lsmod: ide_cd 48260 0 lsmod: cdrom 43804 1 ide_cd lsmod: ide_disk 20672 0 lsmod: ide_generic 1216 0 [permanent] lsmod: cmd64x 13404 0 [permanent] lsmod: ns87415 5860 0 [permanent] lsmod: ide_core 134028 5 ide_cd,ide_disk,ide_generic,cmd64x,ns87415 lsmod: lasi_82596 27860 0 df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs30824 412 30412 1% /dev df: tmpfs30824 412 30412 1% /dev df: tmpfs30824 412 30412 1% /.dev df: /dev/scsi/host0/bus0/target6/lun0/part5790556435512314884 58% /target df: /dev/scsi/host0/bus0/target6/lun0/part2 75272 9388 61868 13% /target/boot free: total used free shared buffers free: Mem:6164858220 34280 5896 free: Swap: 104380 3540 100840 free: Total: 16602861760 104268 cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 48: pccardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 49: pccardctl: not found cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found /proc/cpuinfo: processor: 0 /proc/cpuinfo: cpu family : PA-RISC 1.1d /proc/cpuinfo: cpu : PA7100LC (PCX-L) /proc/cpuinfo: cpu MHz : 60.00 /proc/cpuinfo: model: 9000/712 /proc/cpuinfo: model name : Gecko (712/60) /proc/cpuinfo: hversion : 0x6000 /proc/cpuinfo: sversion : 0x0481 /proc/cpuinfo: I-cache : 32 KB /proc/cpuinfo: D-cache : 32 KB (WB, direct mapped) /proc/cpuinfo: ITLB entries : 64 /proc/cpuinfo: DTLB entries : 64 - shared with ITLB /proc/cpuinfo: BTLB fixed : max. 16384 pages, pagesize=4096 (64MB) /proc/cpuinfo: BTLB fix-entr. : 0 instruction, 0 data (8 combined) /proc/cpuinfo: BTLB var-entr. : 0 instruction, 0 data (0 combined) /proc/cpuinfo: bogomips : 59.26 /proc/cpuinfo: software id : 2004331096 /proc/cpuinfo: /proc/iomem: -03ff : System RAM /proc/iomem: -09ff : PDC data (Page Zero) /proc/iomem: 0010-00348fff : Kernel code
Bug#410388: installation-report: Alpha Personal Workstation 500a
Package: installation-reports Version: 2.23 Severity: normal -- Package-specific info: Boot method: CD Image version: Daily build netinst of 2007/02/06 Date: 2007/02/10 11h00 Machine: Digital Alpha Personal Workstation 500a Partitions: Disk /dev/sda: 4290 MB, 4290600960 bytes 255 heads, 63 sectors/track, 521 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes 5 partitions: # start end size fstype [fsize bsize cpg] a:1*1*0* ext2 b:1* 10*9* ext2 c: 10* 496* 485* ext2 d: 496* 522* 26* swap Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: Just after installation, at the first reboot, the machine tried to boot from its cdrom instead of the first harddisk. Since the cd was no longer present, this failed. I switched the computer off and on again; this time it booted from the first harddisk. This also happened on Sarge and at that time there was no solution for this (it is not really that much of an issue). -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=4.0 (installer build 20070204-23:46) X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == umame -a: Linux alpha500 2.6.18-4-alpha-generic #1 Fri Feb 2 14:27:37 UTC 2007 alpha unknown lspci -nn: 00:03.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21142/43 [1011:0019] (rev 30) lspci -nn: 00:07.0 ISA bridge [0601]: Contaq Microsystems 82c693 [1080:c693] lspci -nn: 00:07.1 IDE interface [0101]: Contaq Microsystems 82c693 [1080:c693] lspci -nn: 00:07.2 IDE interface [0101]: Contaq Microsystems 82c693 [1080:c693] lspci -nn: 00:07.3 USB Controller [0c03]: Contaq Microsystems 82c693 [1080:c693] lspci -nn: 00:0c.0 VGA compatible controller [0300]: Texas Instruments TVP4020 [Permedia 2] [104c:3d07] (rev 01) lspci -nn: 00:14.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152 [1011:0024] (rev 02) lspci -nn: 01:04.0 SCSI storage controller [0100]: QLogic Corp. ISP1020 Fast-wide SCSI [1077:1020] (rev 05) lspci -vnn: 00:03.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21142/43 [1011:0019] (rev 30) lspci -vnn: Flags: bus master, medium devsel, latency 255, IRQ 24 lspci -vnn: I/O ports at 9000 [size=128] lspci -vnn: Memory at 0a281000 (32-bit, non-prefetchable) [size=128] lspci -vnn: Expansion ROM at 0a20 [disabled] [size=256K] lspci -vnn: lspci -vnn: 00:07.0 ISA bridge [0601]: Contaq Microsystems 82c693 [1080:c693] lspci -vnn: Flags: bus master, medium devsel, latency 0 lspci -vnn: lspci -vnn: 00:07.1 IDE interface [0101]: Contaq Microsystems 82c693 [1080:c693] (prog-if 80 [Master]) lspci -vnn: Flags: bus master, medium devsel, latency 0 lspci -vnn: I/O ports at 01f0 [size=8] lspci -vnn: I/O ports at 03f4 [size=4] lspci -vnn: I/O ports at 9080 [size=16] lspci -vnn: lspci -vnn: 00:07.2 IDE interface [0101]: Contaq Microsystems 82c693 [1080:c693] (prog-if 00 []) lspci -vnn: Flags: bus master, medium devsel, latency 0 lspci -vnn: I/O ports at 0170 [size=8] lspci -vnn: I/O ports at 0374 [size=4] lspci -vnn: Memory at 0a26 (32-bit, non-prefetchable) [disabled] [size=64K] lspci -vnn: lspci -vnn: 00:07.3 USB Controller [0c03]: Contaq Microsystems 82c693 [1080:c693] (prog-if 10) lspci -vnn: Flags: bus master, medium devsel, latency 248, IRQ 10 lspci -vnn: Memory at 0a28 (32-bit, non-prefetchable) [size=4K] lspci -vnn: lspci -vnn: 00:0c.0 VGA compatible controller [0300]: Texas Instruments TVP4020 [Permedia 2] [104c:3d07] (rev 01) lspci -vnn: Subsystem: Elsa AG Unknown device [1048:0a32] lspci -vnn: Flags: bus master, medium devsel, latency 255, IRQ 32 lspci -vnn: Memory at 0a24 (32-bit, non-prefetchable) [size=128K] lspci -vnn: Memory at 0900 (32-bit, non-prefetchable) [size=8M] lspci -vnn: Memory at 0980 (32-bit, non-prefetchable) [size=8M] lspci -vnn: Expansion ROM at 0a27 [disabled] [size=64K] lspci -vnn: lspci -vnn: 00:14.0 PCI bridge [0604]: Digital Equipment
Bug#410423: installation-report: HP Workstation 712/60
Package: installation-reports Version: 2.23 Severity: normal -- Package-specific info: Boot method: Network Image version: Daily build netboot of 2007/02/10 Date: 2007/02/10 12h30 Machine: HP Workstation 712/60 Partitions: Disk /dev/sda: 1050 MB, 1050347520 bytes 255 heads, 63 sectors/track, 127 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 4 32098+ f0 Linux/PA-RISC boot /dev/sda2 5 14 80325 83 Linux /dev/sda3 15 127 907672+ 5 Extended /dev/sda5 * 15 114 803218+ 83 Linux /dev/sda6 115 127 104391 82 Linux swap / Solaris Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [E] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: I did not get an error during setup, but after the first boot, the date was somewhere in 2034. I manually installed ntpdate and ran it to correct the date/time. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=4.0 (installer build 20070210-07:41) X_INSTALLATION_MEDIUM=netboot == Installer hardware-summary: == umame -a: Linux parisc-712 2.6.18-4-parisc #1 Fri Feb 2 07:40:27 MST 2007 parisc unknown lsmod: Module Size Used by lsmod: ext3 169032 1 lsmod: jbd70664 1 ext3 lsmod: zalon7xx 36460 0 lsmod: sd_mod 24112 4 lsmod: lasi700 3840 3 lsmod: 53c700 34696 1 lasi700 lsmod: scsi_transport_spi 32160 2 zalon7xx,53c700 lsmod: scsi_mod 161296 5 zalon7xx,sd_mod,lasi700,53c700,scsi_transport_spi lsmod: isofs 41624 0 lsmod: ide_cd 48260 0 lsmod: cdrom 43804 1 ide_cd lsmod: ide_disk 20672 0 lsmod: ide_generic 1216 0 [permanent] lsmod: cmd64x 13404 0 [permanent] lsmod: ns87415 5860 0 [permanent] lsmod: ide_core 134028 5 ide_cd,ide_disk,ide_generic,cmd64x,ns87415 lsmod: lasi_82596 27860 0 df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs30824 412 30412 1% /dev df: tmpfs30824 412 30412 1% /dev df: tmpfs30824 412 30412 1% /.dev df: /dev/scsi/host0/bus0/target6/lun0/part5790556440612309784 59% /target df: /dev/scsi/host0/bus0/target6/lun0/part2 75272 9690 61566 14% /target/boot free: total used free shared buffers free: Mem:6164858024 36240 5812 free: Swap: 104380 3576 100804 free: Total: 16602861600 104428 cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 48: pccardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 49: pccardctl: not found cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found /proc/cpuinfo: processor: 0 /proc/cpuinfo: cpu family : PA-RISC 1.1d /proc/cpuinfo: cpu : PA7100LC (PCX-L) /proc/cpuinfo: cpu MHz : 60.00 /proc/cpuinfo: model: 9000/712 /proc/cpuinfo: model name : Gecko (712/60) /proc/cpuinfo: hversion : 0x6000 /proc/cpuinfo: sversion : 0x0481 /proc/cpuinfo: I-cache : 32 KB /proc/cpuinfo: D-cache : 32 KB (WB, direct mapped) /proc/cpuinfo: ITLB entries : 64 /proc/cpuinfo: DTLB entries : 64 - shared with ITLB /proc/cpuinfo: BTLB fixed : max. 16384 pages, pagesize=4096 (64MB) /proc/cpuinfo: BTLB fix-entr. : 0 instruction, 0 data (8 combined) /proc/cpuinfo: BTLB var-entr. : 0 instruction, 0 data (0 combined) /proc/cpuinfo: bogomips : 59.26 /proc/cpuinfo: software id : 2004331096 /proc/cpuinfo: /proc/iomem: -03ff : System RAM /proc/iomem: -09ff : PDC data (Page Zero) /proc/iomem:
Bug#409956: Installation report: SUN Ultra 10
Package: installation-reports Boot method: CD Image version: Daily build netinst of 2007/02/06 Date: 2007/02/06 17h15 Machine: SUN Ultra 10 Processor: TI UltraSparc IIi (Sabre) Memory: 256 MB Partitions: N/A Output of lspci -nn and lspci -vnn: N/A Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [E] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [ ] User/password setup:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: When I tried booting with either the install or the rescue kernel, I quickly got the OpenBoot prompt back after the message: Allocated 8 megs of memory at 0x4000 for kernel Fast Data Access MMU Miss KR, Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#409965: installation-report SUN Ultra 10
Package: installation-reports Version: 2.23 Severity: normal -- Package-specific info: Boot method: CD Image version: Daily build netinst of 2007/02/06 Date: 2007/02/06 19h30 Machine: SUN Ultra 10 Partitions: FilesystemType 1K-blocks Used Available Use% Mounted on /dev/hda2 ext3 8230432573448 7238896 8% / tmpfstmpfs 127800 0127800 0% /lib/init/rw udev tmpfs 10240 128 10112 2% /dev tmpfstmpfs 127800 0127800 0% /dev/shm /dev/hda1 ext3 93335 12687 75829 15% /boot Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: Since this machine has 2 video-cards (ATI and Creator 3D), I had to boot with kernel parameter video=atyfb:off. This was clearly documented in the installation manual. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=4.0 (installer build 20070205-12:07) X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == umame -a: Linux sun-ultra 2.6.18-4-sparc64 #1 Fri Feb 2 08:44:57 PST 2007 sparc64 unknown lspci -nn: 00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIi [108e:a000] lspci -nn: 00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -nn: 00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -nn: 01:01.0 Bridge [0680]: Sun Microsystems Computer Corp. EBUS [108e:1000] (rev 01) lspci -nn: 01:01.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. Happy Meal [108e:1001] (rev 01) lspci -nn: 01:02.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage Pro 215GP [1002:4750] (rev 5c) lspci -nn: 01:03.0 IDE interface [0101]: Silicon Image, Inc. PCI0646 [1095:0646] (rev 03) lspci -vnn: 00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIi [108e:a000] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 40 lspci -vnn: lspci -vnn: 00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64 lspci -vnn: Bus: primary=00, secondary=02, subordinate=ff, sec-latency=64 lspci -vnn: I/O behind bridge: -0fff lspci -vnn: Memory behind bridge: -000f lspci -vnn: Prefetchable memory behind bridge: -000f lspci -vnn: lspci -vnn: 00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64 lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 lspci -vnn: I/O behind bridge: -0fff lspci -vnn: Memory behind bridge: -000f lspci -vnn: Prefetchable memory behind bridge: -000f lspci -vnn: lspci -vnn: 01:01.0 Bridge [0680]: Sun Microsystems Computer Corp. EBUS [108e:1000] (rev 01) lspci -vnn: Flags: bus master, medium devsel, latency 80 lspci -vnn: Memory at 1fff000 (32-bit, non-prefetchable) [size=16M] lspci -vnn: Memory at 1fff100 (32-bit, non-prefetchable) [size=8M] lspci -vnn: Expansion ROM at 1ffe300 [disabled] [size=16M] lspci -vnn: lspci -vnn: 01:01.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. Happy Meal [108e:1001] (rev 01) lspci -vnn: Flags: bus master, medium devsel, latency 80, IRQ 12 lspci -vnn: Memory at 1ffe000 (32-bit, non-prefetchable) [size=32K] lspci -vnn: Expansion ROM at 1ffe400 [disabled] [size=16M] lspci -vnn: lspci -vnn: 01:02.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage Pro 215GP [1002:4750] (rev 5c) lspci -vnn: Flags: bus master, stepping, medium devsel, latency 64, IRQ 13 lspci -vnn: Memory at 1ffe100 (32-bit, non-prefetchable) [size=16M] lspci -vnn: I/O ports at 1fe02c00400 [size=256] lspci -vnn: Memory at 1ffe200 (32-bit, non-prefetchable) [size=4K] lspci -vnn: Expansion ROM at 1ffe002 [disabled] [size=128K] lspci -vnn: lspci -vnn:
Bug#407017: installation-report: SUN Ultra 10
Package: installation-reports Version: 2.23 Severity: normal -- Package-specific info: Boot method: CD Image version: http://cdimage.debian.org/cdimage/etch_di_rc1/sparc/iso-cd/debian-testing-sparc-netinst.iso Date: 2007/01/15 17:00 Machine: SUN Ultra 10 Partitions: Disk /dev/hda (Sun disk label): 255 heads, 63 sectors, 1108 cylinders Units = cylinders of 16065 * 512 bytes Device FlagStart EndBlocks Id System /dev/hda1 012 963901 Boot /dev/hda212 1057 8393962+ 83 Linux native /dev/hda3 0 1108 89000105 Whole disk /dev/hda4 1057 1108409657+ 82 Linux swap Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: Since this machine has 2 video-cards (ATI and Creator 3D), I had to boot with kernel parameter video=atyfb:off. This was clearly documented in the installation manual. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=3.1 (installer build 20061102) X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == umame -a: Linux ultra10 2.6.17-2-sparc64 #1 Wed Sep 13 10:39:24 PDT 2006 sparc64 unknown lspci -nn: 00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIi [108e:a000] lspci -nn: 00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -nn: 00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -nn: 01:01.0 Bridge [0680]: Sun Microsystems Computer Corp. EBUS [108e:1000] (rev 01) lspci -nn: 01:01.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. Happy Meal [108e:1001] (rev 01) lspci -nn: 01:02.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage Pro 215GP [1002:4750] (rev 5c) lspci -nn: 01:03.0 IDE interface [0101]: Silicon Image, Inc. PCI0646 [1095:0646] (rev 03) lspci -vnn: 00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIi [108e:a000] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 40 lspci -vnn: lspci -vnn: 00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64 lspci -vnn: Bus: primary=00, secondary=02, subordinate=ff, sec-latency=64 lspci -vnn: I/O behind bridge: -0fff lspci -vnn: Memory behind bridge: -000f lspci -vnn: Prefetchable memory behind bridge: -000f lspci -vnn: lspci -vnn: 00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 13) lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64 lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 lspci -vnn: I/O behind bridge: -0fff lspci -vnn: Memory behind bridge: -000f lspci -vnn: Prefetchable memory behind bridge: -000f lspci -vnn: lspci -vnn: 01:01.0 Bridge [0680]: Sun Microsystems Computer Corp. EBUS [108e:1000] (rev 01) lspci -vnn: Flags: bus master, medium devsel, latency 80 lspci -vnn: Memory at 1fff000 (32-bit, non-prefetchable) [size=16M] lspci -vnn: Memory at 1fff100 (32-bit, non-prefetchable) [size=8M] lspci -vnn: Expansion ROM at 1ffe300 [disabled] [size=16M] lspci -vnn: lspci -vnn: 01:01.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. Happy Meal [108e:1001] (rev 01) lspci -vnn: Flags: bus master, medium devsel, latency 80, IRQ 7418720 lspci -vnn: Memory at 1ffe000 (32-bit, non-prefetchable) [size=32K] lspci -vnn: Expansion ROM at 1ffe400 [disabled] [size=16M] lspci -vnn: lspci -vnn: 01:02.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage Pro 215GP [1002:4750] (rev 5c) lspci -vnn: Flags: bus master, stepping, medium devsel, latency 64, IRQ 7418144 lspci -vnn: Memory at 1ffe100 (32-bit, non-prefetchable) [size=16M] lspci -vnn: I/O ports at 1fe02c00400 [size=256] lspci -vnn: Memory at 1ffe200 (32-bit, non-prefetchable) [size=4K]
Bug#405920: installation-report: Digital Personal Workstation 500a
Package: installation-reports Version: 2.23 Severity: normal -- Package-specific info: Boot method: CD Image version: http://cdimage.debian.org/debian-testing-alpha-netinst.iso Date: 2007/01/07 11:00 Machine: Digital Personal Workstation 500a Partitions: Disk /dev/sda: 4290 MB, 4290600960 bytes 255 heads, 63 sectors/track, 521 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes 5 partitions: # start end size fstype [fsize bsize cpg] a:1*1*0* ext2 b:1* 10*9* ext2 c: 10* 495* 484* ext2 d: 495* 522* 27* swap Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: After installing everything for the Desktop task in tasksel, I manually had to install the following packages: xserver-xorg-input-mouse xserver-xorg-input-kbd xserver-xorg-video-glint Those packages were not present and this prevented xorg from starting. After installing those extra packages, I had to modify /etc/X11/xorg.conf to have xorg use the glint video-driver instead of the apm-driver. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=3.1 (installer build 20061102) X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == umame -a: Linux alpha500 2.6.17-2-alpha-generic #1 Wed Sep 13 15:51:30 UTC 2006 alpha unknown lspci -nn: 00:03.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21142/43 [1011:0019] (rev 30) lspci -nn: 00:07.0 ISA bridge [0601]: Contaq Microsystems 82c693 [1080:c693] lspci -nn: 00:07.1 IDE interface [0101]: Contaq Microsystems 82c693 [1080:c693] lspci -nn: 00:07.2 IDE interface [0101]: Contaq Microsystems 82c693 [1080:c693] lspci -nn: 00:07.3 USB Controller [0c03]: Contaq Microsystems 82c693 [1080:c693] lspci -nn: 00:0c.0 VGA compatible controller [0300]: Texas Instruments TVP4020 [Permedia 2] [104c:3d07] (rev 01) lspci -nn: 00:14.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152 [1011:0024] (rev 02) lspci -nn: 01:04.0 SCSI storage controller [0100]: QLogic Corp. ISP1020 Fast-wide SCSI [1077:1020] (rev 05) lspci -vnn: 00:03.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21142/43 [1011:0019] (rev 30) lspci -vnn: Flags: bus master, medium devsel, latency 255, IRQ 24 lspci -vnn: I/O ports at 9000 [size=128] lspci -vnn: Memory at 0a281000 (32-bit, non-prefetchable) [size=128] lspci -vnn: Expansion ROM at 0a20 [disabled] [size=256K] lspci -vnn: lspci -vnn: 00:07.0 ISA bridge [0601]: Contaq Microsystems 82c693 [1080:c693] lspci -vnn: Flags: bus master, medium devsel, latency 0 lspci -vnn: lspci -vnn: 00:07.1 IDE interface [0101]: Contaq Microsystems 82c693 [1080:c693] (prog-if 80 [Master]) lspci -vnn: Flags: bus master, medium devsel, latency 0 lspci -vnn: I/O ports at 01f0 [size=8] lspci -vnn: I/O ports at 03f4 [size=4] lspci -vnn: I/O ports at 9080 [size=16] lspci -vnn: lspci -vnn: 00:07.2 IDE interface [0101]: Contaq Microsystems 82c693 [1080:c693] (prog-if 00 []) lspci -vnn: Flags: bus master, medium devsel, latency 0 lspci -vnn: I/O ports at 0170 [size=8] lspci -vnn: I/O ports at 0374 [size=4] lspci -vnn: Memory at 0a26 (32-bit, non-prefetchable) [disabled] [size=64K] lspci -vnn: lspci -vnn: 00:07.3 USB Controller [0c03]: Contaq Microsystems 82c693 [1080:c693] (prog-if 10) lspci -vnn: Flags: bus master, medium devsel, latency 248, IRQ 10 lspci -vnn: Memory at 0a28 (32-bit, non-prefetchable) [size=4K] lspci -vnn: lspci -vnn: 00:0c.0 VGA compatible controller [0300]: Texas Instruments TVP4020 [Permedia 2] [104c:3d07] (rev 01) lspci -vnn: Subsystem: Elsa AG Unknown device [1048:0a32] lspci -vnn: Flags: bus master, medium devsel, latency 255, IRQ 32 lspci -vnn: Memory at 0a24 (32-bit, non-prefetchable) [size=128K] lspci -vnn: Memory at 0900 (32-bit, non-prefetchable) [size=8M] lspci -vnn: Memory at 0980 (32-bit, non-prefetchable) [size=8M] lspci -vnn: Expansion
Bug#301504: Debian Installer RC 3 on PARISC
I already tried this but still got the 'Kernel panic' message. But, it HAS something to do with it. I doubled the initial ram-disk size set in palo (something like lilo on i386) and I no longer got the message about 'incomplete write'. I just got 'Kernel panic. No init found.' Probably some other messages just scrolled by and I did not have the time to read them; scrolling happens in just the top line, so you immediately loose the previous lines. Therefore I connected an HP Terminal (700/96; brings back memories :) and changed the console to the serial port. Now the machine booted just fine. So it took me TWO things to change: -doubling the ramdisk_size to 32768 -changing from framebuffer to serial console Probably de-activating the framebuffer could also help, but I tried the parameter debian_installer/framebuffer=false, and this still brought up the framebuffer console. Installation has just started, I'll keep you informed. Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#301504: Debian Installer RC 3 on PARISC
On Thursday 31 March 2005 13:24, Frans Pop wrote: On Thursday 31 March 2005 12:27, Peter Van Loock wrote: Probably de-activating the framebuffer could also help, but I tried the parameter debian_installer/framebuffer=false, and this still brought up ^^^ - Typo? Should be debian-installer/framebuffer=false ^^^ the framebuffer console. Sorry, indeed a typo in my last e-mail. I DID use debian-installer (with the minus sign instead of the underscore). Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#301504: Debian Installer RC 3 on PARISC
After doubling the ramdisk_size to 32768 and using a serial terminal as console (on ttyS0), the installer worked fine. So: Package: installation-reports Debian-installer-version: RC3 uname -a: palinux Date: Thu Mar 31 15:08:17 CEST 2005 Method: Booted from CD Machine: Hewlett Packard 9000-712/60 Processor: PA-Risc 1.1d - PA7100 LC (PCX-L) Memory: 64 MB Root Device: SCSI, /dev/sda Root Size/partition table: 625 MB Output of lspci: N/A Base System Installation Checklist: Initial boot worked:[O] after ramdisk_size=32768 and console=ttyS0 Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems:[O] Mount partitions: [O] Install base system:[O] Install boot loader:[O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Afterwards I had to modify /etc/inittab and reconfiguring console-data to get my console back on tty0 with the correct keyboard. But that has nothing to do with the installer. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#302402: Debian Installer RC 3 on PARISC - Netboot
Package: installation-reports Debian-installer-version: RC3 uname -a: Linux palinux 2.6.8-2-32-smp #1 SMP Mon Feb 7 22:19:10 EST 2005 parisc GNU/Linux Date: Thu Mar 31 18:29:15 CEST 2005 Method: Booted boot.img from bootp-server Machine: Hewlett Packard 9000-712/60 Processor: PA-Risc 1.1d - PA7100 LC (PCX-L) Memory: 64 MB Root Device: SCSI, /dev/sda Root Size/partition table: Disk /dev/sda: 1050 MB, 1050347520 bytes 255 heads, 63 sectors/track, 127 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 4 32098+ f0 Linux/PA-RISC boot /dev/sda2 5 14 80325 83 Linux /dev/sda3 15 127 907672+ 5 Extended /dev/sda5 * 15 118 835348+ 83 Linux /dev/sda6 119 127 72261 82 Linux swap sda2 = /boot sda5 = / Output of lspci: N/A Base System Installation Checklist: Initial boot worked:[E] OK after changing ramdisk_size Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [0] Create file systems:[O] Mount partitions: [O] Install base system:[O] Install boot loader:[O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: When booting without changing any boot-parameters, the system would hang with as last message 'Kernel panic: no init found'. Previous messages already had scrolled off the screen (because the scrolling takes place on the first line). However, I already had some experience with booting from CD (see bug report 301504), so I changed the parameter ramdisk_size to different values. I tried this numbers: 4096 -- same problem 8192 -- same problem 16384 -- OK, installer started fine 32768 -- OK, installer started fine I only tried these values, if you want me to search further (some values in between), please let me know. After that initial problem was solved, the installation went fine. Just one remark: after every 'apt-get update' I get the following message: connecting to mirror I chose module ipv6 relocation of symbol capable is out of range (0x3ffeffdc in 17 bits). -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#301504: Debian Installer RC 3 on PARISC
Package: installation-reports Debian-installer-version: RC3 uname -a: N/A Date: Sat Mar 26 13:03:37 CET 2005 Method: Booted from CD Machine: Hewlett Packard 9000-712/60 Processor: PA-Risc 1.1d - PA7100 LC (PCX-L) Memory: 64 MB Root Device: SCSI, /dev/sda Root Size/partition table: N/A Output of lspci: N/A Base System Installation Checklist: Initial boot worked:[E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems:[ ] Mount partitions: [ ] Install base system:[ ] Install boot loader:[ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: After booting from cd I get the usual boot-messages up to the message: RAMDISK incomplete write (-28 != 32768) Kernel panic. No init found. I wrote the image to another cd, same result. Downloaded the image again, wrote to another cd, same result. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]