Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Hello Diederik, Thanks for the good news: On Fri 13 May 2022 at 02:19:44 +0200 Diederik de Haas wrote: [...] > Francesco reported that the issue was fixed for him in 5.17.0-2-686 which > corresponds to 5.17.6 upstream kernel. > Petra & Axel: can you verify whether it is also fixed for you? I downloaded http://ftp.de.debian.org/debian/pool/main/l/linux-signed-i386/linux-image-5.17.0-2-686_5.17.6-1_i386.deb and installed it with "dpkg -i" on both T41 Thinkpads, and they both rebooted (and are now working) flawlessly :-)) Thanks to all who have contributed to this solution! Best regards, Petra
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Am Sa., 9. Apr. 2022, um 08:20 +0200 schrieb Petra R.-P. : > Am Sa., 26. Mär. 2022, um 17:19 +0100 schrieb Petra Rübe-Pugliese > : > > On Sat 12 Mar 2022 at 21:31:38 +0100 Petra R.-P. > > wrote: > > > On Sat 05 Mar 2022 at 17:59:51 +0100 Petra R.-P. > > > wrote: > > > [...] > > > > > > The error persists also in linux-image-5.16.0-4-686 (5.16.12-1) . > > > > ... and in linux-image-5.16.0-5-686 (5.16.14-1) ... > > ... and in linux-image-5.16.0-6-686 (5.16.18-1) ... ... and in linux-image-5.17.0-1-686 (5.17.3-1) ... although the last messages visible on screen are now different; in fact the last one is: clocksource: Switched to clocksource acpi_pm Petra
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Am Sa., 26. Mär. 2022, um 17:19 +0100 schrieb Petra Rübe-Pugliese : > On Sat 12 Mar 2022 at 21:31:38 +0100 Petra R.-P. > wrote: > > On Sat 05 Mar 2022 at 17:59:51 +0100 Petra R.-P. > > wrote: > > [...] > > > > The error persists also in linux-image-5.16.0-4-686 (5.16.12-1) . > > ... and in linux-image-5.16.0-5-686 (5.16.14-1) ... ... and in linux-image-5.16.0-6-686 (5.16.18-1) ... Petra
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
On Mon 04 Apr 2022 at 18:09:59 +0900 Damien Le Moal wrote: [...] > hdparm -I /dev/sdX ,-[ 1st T41 ]- | netty:~# hdparm -I /dev/sda | | /dev/sda: | | ATA device, with non-removable media | Model Number: IC25N030ATMR04-0 | Serial Number: MRG2H0KBCYTR8R | Firmware Revision: MOAOAD4A | Standards: | Used: ATA/ATAPI-6 T13 1410D revision 3a | Supported: 6 5 4 | Configuration: | Logical max current | cylinders 16383 16383 | heads 15 15 | sectors/track 63 63 | -- | CHS current addressable sectors:15481935 | LBAuser addressable sectors:58605120 | Logical/Physical Sector size: 512 bytes | device size with M = 1024*1024: 28615 MBytes | device size with M = 1000*1000: 30005 MBytes (30 GB) | cache/buffer size = 1740 KBytes (type=DualPortCache) | Capabilities: | LBA, IORDY(can be disabled) | Standby timer values: spec'd by Vendor, no device specific minimum | R/W multiple sector transfer: Max = 16 Current = 16 | Advanced power management level: 128 | Recommended acoustic management value: 128, current value: 254 | DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 | Cycle time: min=120ns recommended=120ns | PIO: pio0 pio1 pio2 pio3 pio4 | Cycle time: no flow control=240ns IORDY flow control=120ns | Commands/features: | Enabled Supported: |*SMART feature set | Security Mode feature set |*Power Management feature set |*Write cache |*Look-ahead |*Host Protected Area feature set |*WRITE_BUFFER command |*READ_BUFFER command |*NOP cmd |*Advanced Power Management feature set | Power-Up In Standby feature set |*SET_FEATURES required to spinup after power up | Address Offset Reserved Area Boot | SET_MAX security extension | Automatic Acoustic Management feature set |*Device Configuration Overlay feature set |*Mandatory FLUSH_CACHE |*SMART error logging |*SMART self-test | Security: | Master password revision code = 65534 | supported | not enabled | not locked | frozen | not expired: security count | not supported: enhanced erase | 26min for SECURITY ERASE UNIT. | HW reset results: | CBLID- above Vih | Device num = 0 determined by the jumper | Checksum: correct | netty:~# ` ,-[ 2nd T41 ]- | negrito:~# hdparm -I /dev/sda | | /dev/sda: | | ATA device, with non-removable media | Model Number: HTS548040M9AT00 | Serial Number: MRL202L2K9PJ6B | Firmware Revision: MG2OA5BA | Standards: | Used: ATA/ATAPI-6 T13 1410D revision 3a | Supported: 6 5 4 | Configuration: | Logical max current | cylinders 16383 16383 | heads 16 16 | sectors/track 63 63 | -- | CHS current addressable sectors:16514064 | LBAuser addressable sectors:78140160 | Logical/Physical Sector size: 512 bytes | device size with M = 1024*1024: 38154 MBytes | device size with M = 1000*1000: 40007 MBytes (40 GB) | cache/buffer size = 7877 KBytes (type=DualPortCache) | Capabilities: | LBA, IORDY(can be disabled) | Standby timer values: spec'd by Vendor, no device specific minimum | R/W multiple sector transfer: Max = 16 Current = 16 | Advanced power management level: 192 | Recommended acoustic management value: 128, current value: 254 | DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 | Cycle time: min=120ns recommended=120ns | PIO: pio0 pio1 pio2 pio3 pio4 | Cycle time: no flow control=240ns IORDY flow control=120ns | Commands/features: | Enabled Supported: |*SMART feature set | Security Mode feature set |*Power Management feature set |*Write cache |*Look-ahead |*Host Protected Area feature set |*WRITE_BUFFER command |*READ_BUFFER command |*NOP cmd |*Advanced Power Management feature set | Power-Up In Standby feature set |*SET_FEATURES required to
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Am Mo., 4. Apr. 2022, um 10:05 +0200 schrieb Axel Beckert : [...] > "fdisk -l /dev/sda" should suffice. ,-[ 1st T41 ]--- | ~ > fdisk -l /dev/sda | Disk /dev/sda: 27.95 GiB, 30005821440 bytes, 58605120 sectors | Disk model: IC25N030ATMR04-0 | Units: sectors of 1 * 512 = 512 bytes | Sector size (logical/physical): 512 bytes / 512 bytes | I/O size (minimum/optimal): 512 bytes / 512 bytes | Disklabel type: dos | Disk identifier: 0xcaef08be | | Device BootStart End Sectors Size Id Type | /dev/sda1 * 63 56098979 56098917 26.8G 83 Linux | /dev/sda2 56098980 58605119 2506140 1.2G 5 Extended | /dev/sda5 56099043 58605119 2506077 1.2G 82 Linux swap / Solaris | ~ > `-- ,-[ 2nd T41 ]--- | ~ > fdisk -l /dev/sda | Disk /dev/sda: 37.26 GiB, 40007761920 bytes, 78140160 sectors | Disk model: HTS548040M9AT00 | Units: sectors of 1 * 512 = 512 bytes | Sector size (logical/physical): 512 bytes / 512 bytes | I/O size (minimum/optimal): 512 bytes / 512 bytes | Disklabel type: dos | Disk identifier: 0x000942b7 | | Device BootStart End Sectors Size Id Type | /dev/sda1 * 63 75119939 75119877 35.8G 83 Linux | /dev/sda2 75119940 78140159 3020220 1.4G 5 Extended | /dev/sda5 75120003 78140159 3020157 1.4G 82 Linux swap / Solaris | ~ > `-- Looks rather "no name" to me ... Petra
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Am Mo., 4. Apr. 2022, um 16:39 +0900 schrieb Damien Le Moal : [...] > By the way, what is the drive connected on your Thinkpad ? Same as Axel, a > Samsung HM160HC ? If it is a different drive, then patch 2 (big hammer) may > be better as this may indicate that the adapter does not like read log > commands... Sorry for the stupid question, but: How can I find out? What command shall I enter? What part of the output are you interested in? Petra
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Just for the record: On Mon 04 Apr 2022 at 14:49:05 +0900 Damien Le Moal wrote: [...] > There will be no issue with your 1GB of ram. Giving this amount of ram and > CPU, step (4) will indeed take a while, but it will run fine. My T41 Thinkpads only have 500MB of ram and little space left on their hd. Added to that my inexperience and lack of time I'm afraid I cannot be of much help for re-compiling kernels (which AFAIK is quite a stress test for computers). Sorry. Petra
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Am Mi., 30. Mär. 2022, um 08:38 +0200 schrieb Salvatore Bonaccorso : [...] > Thanks for constantly testing the new versions (there is 5.16.18-1 > upcoming btw, or 5.17.1 in experiemntal). I'm just testing whatever is pulled in automatically by linux-image-686 (in bookworm). > > Do we have a report upstream already about this issue? I don't know anything that has not been reported to 1006...@bugs.debian.org . Best regards, Petra
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
On Sat 05 Mar 2022 at 17:59:51 +0100 Petra R.-P. wrote: > Update for linux-image-5.16.0-3-686 : [...] The error persists also in linux-image-5.16.0-4-686 (5.16.12-1) . Petra
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
For the sake of completeness ... On Wed 09 Mar 2022 at 08:35:57 +0100 Petra R.-P. wrote: [...] > Okay, that's easier: See attached dmesg-T41-k5.15.txt . Adding dmesg-T41-b-k5.15.txt — corresponding file for the other T41 notebook, which has slightly different hardware. Best, Petra [0.00] Linux version 5.15.0-3-686 (debian-ker...@lists.debian.org) (gcc-11 (Debian 11.2.0-14) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37.90.20220123) #1 SMP Debian 5.15.15-2 (2022-01-30) [0.00] x86/fpu: x87 FPU will use FXSAVE [0.00] signal: max sigframe size: 1440 [0.00] BIOS-provided physical RAM map: [0.00] BIOS-e820: [mem 0x-0x0009efff] usable [0.00] BIOS-e820: [mem 0x0009f000-0x0009] reserved [0.00] BIOS-e820: [mem 0x000d2000-0x000d3fff] reserved [0.00] BIOS-e820: [mem 0x000dc000-0x000f] reserved [0.00] BIOS-e820: [mem 0x0010-0x1ff5] usable [0.00] BIOS-e820: [mem 0x1ff6-0x1ff76fff] ACPI data [0.00] BIOS-e820: [mem 0x1ff77000-0x1ff78fff] ACPI NVS [0.00] BIOS-e820: [mem 0x1ff8-0x1fff] reserved [0.00] BIOS-e820: [mem 0xff80-0x] reserved [0.00] Notice: NX (Execute Disable) protection missing in CPU! [0.00] SMBIOS 2.3 present. [0.00] DMI: IBM 2374TG6/2374TG6, BIOS 1RETCDWW (3.06f) 06/18/2004 [0.00] tsc: Fast TSC calibration using PIT [0.00] tsc: Detected 1594.697 MHz processor [0.005065] e820: update [mem 0x-0x0fff] usable ==> reserved [0.005074] e820: remove [mem 0x000a-0x000f] usable [0.005087] last_pfn = 0x1ff60 max_arch_pfn = 0x10 [0.005860] x86/PAT: PAT not supported by the CPU. [0.006732] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [0.015451] initial memory mapped: [mem 0x-0x1cff] [0.015510] RAMDISK: [mem 0x1d984000-0x1f244fff] [0.015521] ACPI: Early table checksum verification disabled [0.015529] ACPI: RSDP 0x000F6E00 24 (v02 IBM ) [0.015542] ACPI: XSDT 0x1FF6ABE8 4C (v01 IBMTP-1R 3066 LTP ) [0.015556] ACPI: FACP 0x1FF6AD00 F4 (v03 IBMTP-1R 3066 IBM 0001) [0.015569] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20210730/tbfadt-564) [0.015578] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x102C/0x0 (20210730/tbfadt-615) [0.015590] ACPI: DSDT 0x1FF6AEE7 00BFBA (v01 IBMTP-1R 3066 MSFT 010E) [0.015601] ACPI: FACS 0x1FF78000 40 [0.015610] ACPI: FACS 0x1FF78000 40 [0.015618] ACPI: SSDT 0x1FF6AEB4 33 (v01 IBMTP-1R 3066 MSFT 010E) [0.015629] ACPI: ECDT 0x1FF76EA1 52 (v01 IBMTP-1R 3066 IBM 0001) [0.015640] ACPI: TCPA 0x1FF76EF3 32 (v01 IBMTP-1R 3066 PTL 0001) [0.015650] ACPI: BOOT 0x1FF76FD8 28 (v01 IBMTP-1R 3066 LTP 0001) [0.015660] ACPI: Reserving FACP table memory at [mem 0x1ff6ad00-0x1ff6adf3] [0.015665] ACPI: Reserving DSDT table memory at [mem 0x1ff6aee7-0x1ff76ea0] [0.015669] ACPI: Reserving FACS table memory at [mem 0x1ff78000-0x1ff7803f] [0.015674] ACPI: Reserving FACS table memory at [mem 0x1ff78000-0x1ff7803f] [0.015679] ACPI: Reserving SSDT table memory at [mem 0x1ff6aeb4-0x1ff6aee6] [0.015683] ACPI: Reserving ECDT table memory at [mem 0x1ff76ea1-0x1ff76ef2] [0.015688] ACPI: Reserving TCPA table memory at [mem 0x1ff76ef3-0x1ff76f24] [0.015693] ACPI: Reserving BOOT table memory at [mem 0x1ff76fd8-0x1ff76fff] [0.015715] 0MB HIGHMEM available. [0.015718] 511MB LOWMEM available. [0.015721] mapped low ram: 0 - 1ff6 [0.015725] low ram: 0 - 1ff6 [0.015741] Zone ranges: [0.015743] DMA [mem 0x1000-0x00ff] [0.015750] Normal [mem 0x0100-0x1ff5] [0.015756] HighMem empty [0.015760] Movable zone start for each node [0.015763] Early memory node ranges [0.015766] node 0: [mem 0x1000-0x0009efff] [0.015771] node 0: [mem 0x0010-0x1ff5] [0.015776] Initmem setup node 0 [mem 0x1000-0x1ff5] [0.015796] On node 0, zone DMA: 1 pages in unavailable ranges [0.016005] On node 0, zone DMA: 97 pages in unavailable ranges [0.025301] Using APIC driver default [0.025444] ACPI: PM-Timer IO Port: 0x1008 [0.025453] Local APIC disabled by BIOS -- you can enable it with "lapic" [0.025457] APIC: disable apic facility [0.025460] APIC: switched to apic NOOP [0.025464] smpboot: Al
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Hello Damien, Thanks for looking into the problem: On Wed 09 Mar 2022 at 16:11:37 +0900 Damien Le Moal wrote: [...] > Could you try this patch: > > diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c [...] I am very sorry, but I am a simple user, not a developer. It would need a lot of tuition to make me accomplish that, and I'm not sure I'd have enough time at the moment. > Not sure if it will help, especially if you have a clean boot with 5.15 > ? If you do, could you also send me the full dmesg of a boot with 5.15 > kernel ? No video, dmesg output :) > > I suspect that my patch that increases the timeout for read log may be > the cause for the "hang", but the root cause is that the laptop drive > does not like read log commands (there are some drives like that). > Before the patch, the failure was faster and somehow ignored. I would > like to see if dmesg shows the failures with 5.15. Okay, that's easier: See attached dmesg-T41-k5.15.txt . HTH a little. Best regards, Petra [0.00] Linux version 5.15.0-3-686 (debian-ker...@lists.debian.org) (gcc-11 (Debian 11.2.0-14) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37.90.20220123) #1 SMP Debian 5.15.15-2 (2022-01-30) [0.00] x86/fpu: x87 FPU will use FXSAVE [0.00] signal: max sigframe size: 1440 [0.00] BIOS-provided physical RAM map: [0.00] BIOS-e820: [mem 0x-0x0009efff] usable [0.00] BIOS-e820: [mem 0x0009f000-0x0009] reserved [0.00] BIOS-e820: [mem 0x000d2000-0x000d3fff] reserved [0.00] BIOS-e820: [mem 0x000dc000-0x000f] reserved [0.00] BIOS-e820: [mem 0x0010-0x1ff5] usable [0.00] BIOS-e820: [mem 0x1ff6-0x1ff76fff] ACPI data [0.00] BIOS-e820: [mem 0x1ff77000-0x1ff78fff] ACPI NVS [0.00] BIOS-e820: [mem 0x1ff8-0x1fff] reserved [0.00] BIOS-e820: [mem 0xff80-0x] reserved [0.00] Notice: NX (Execute Disable) protection missing in CPU! [0.00] SMBIOS 2.3 present. [0.00] DMI: IBM 2374H12/2374H12, BIOS 1RETC6WW (3.05a) 05/14/2004 [0.00] tsc: Fast TSC calibration using PIT [0.00] tsc: Detected 1398.789 MHz processor [0.005574] e820: update [mem 0x-0x0fff] usable ==> reserved [0.005584] e820: remove [mem 0x000a-0x000f] usable [0.005599] last_pfn = 0x1ff60 max_arch_pfn = 0x10 [0.006397] x86/PAT: PAT not supported by the CPU. [0.007306] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [0.017285] initial memory mapped: [mem 0x-0x0eff] [0.017349] RAMDISK: [mem 0x1d5c9000-0x1ed2] [0.017361] ACPI: Early table checksum verification disabled [0.017371] ACPI: RSDP 0x000F6E00 24 (v02 IBM ) [0.017384] ACPI: XSDT 0x1FF6AF83 4C (v01 IBMTP-1R 3051 LTP ) [0.017400] ACPI: FACP 0x1FF6B000 F4 (v03 IBMTP-1R 3051 IBM 0001) [0.017415] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20210730/tbfadt-564) [0.017425] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x102C/0x0 (20210730/tbfadt-615) [0.017439] ACPI: DSDT 0x1FF6B1E7 00BC1F (v01 IBMTP-1R 3051 MSFT 010E) [0.017452] ACPI: FACS 0x1FF78000 40 [0.017461] ACPI: FACS 0x1FF78000 40 [0.017471] ACPI: SSDT 0x1FF6B1B4 33 (v01 IBMTP-1R 3051 MSFT 010E) [0.017484] ACPI: ECDT 0x1FF76E06 52 (v01 IBMTP-1R 3051 IBM 0001) [0.017496] ACPI: TCPA 0x1FF76E58 32 (v01 IBMTP-1R 3051 PTL 0001) [0.017507] ACPI: BOOT 0x1FF76FD8 28 (v01 IBMTP-1R 3051 LTP 0001) [0.017518] ACPI: Reserving FACP table memory at [mem 0x1ff6b000-0x1ff6b0f3] [0.017524] ACPI: Reserving DSDT table memory at [mem 0x1ff6b1e7-0x1ff76e05] [0.017529] ACPI: Reserving FACS table memory at [mem 0x1ff78000-0x1ff7803f] [0.017535] ACPI: Reserving FACS table memory at [mem 0x1ff78000-0x1ff7803f] [0.017540] ACPI: Reserving SSDT table memory at [mem 0x1ff6b1b4-0x1ff6b1e6] [0.017545] ACPI: Reserving ECDT table memory at [mem 0x1ff76e06-0x1ff76e57] [0.017551] ACPI: Reserving TCPA table memory at [mem 0x1ff76e58-0x1ff76e89] [0.017556] ACPI: Reserving BOOT table memory at [mem 0x1ff76fd8-0x1ff76fff] [0.017580] 0MB HIGHMEM available. [0.017584] 511MB LOWMEM available. [0.017587] mapped low ram: 0 - 1ff6 [0.017592] low ram: 0 - 1ff6 [0.017611] Zone ranges: [0.017614] DMA [mem 0x1000-0x00ff] [0.017622] Normal [mem 0x0100-0x1ff5] [0.017629] HighMem empty [
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Hello, I am the "OP" with the T41 Thinkpads. On Tue 08 Mar 2022 at 05:58:53 +0900 Damien Le Moal wrote: > Could you try taking a video of the boot messages ? You can find my first attempt (only ≈12MB) here: https://prp.in-berlin.de/MAQ01257.MP4 I will leave it there for 2 weeks. Not sure if I got the loglevel right and whether the image is clear enough. BTW: This is really a T41 Thinkpad; I'm using it with an external monitor because its display is broken. Best regards, Petra
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Hi Diederik, Am So., 6. Mär. 2022, um 00:44 +0100 schrieb Diederik de Haas : > On Saturday, 5 March 2022 21:12:12 CET Petra R.-P. wrote: [...] > How about in /var/log/kern.log.1 (f.e.) ? The kern.log I inspected yesterday reached back until earlier days, so I don't think kern.log.1 would have contributed anything new. Today's kern.log was a new one. > Because on my system the very first > message of a boot in that file begins with: > [0.00] Linux version 5.16.0-3-amd64 ... Yes, I understood that, and checked the file for such lines over and over again. Not a single trace of any "5.16", only "Linux version 5.15.0-3-686" everywhere. [...] > So far, *I* haven't found a direct clue as to why things fail, so if you do > have _a_ log of a boot with the 5.16 kernel, then having that could help. Sorry, there isn't any such thing: No output: ~/tmp > cd /var/log /var/log > zgrep 5.16.0- kern.log* /var/log > Whereas "zgrep 5.15.0- kern.log*" gives 376 lines of output. > Especially if you could provide a similar log of a boot with the 5.15 kernel. > Doesn't need to be the whole log, but knowing a couple of lines which happen > thereafter on 5.15 but not on 5.16 could provide a clue. See kernel-5.15-log-T41.txt attached. > > I saw that the 5.16.11-1 kernel transitioned to testing and it is useful to > know if the issue is still present with that version. Today's "apt-get dist-upgrade" did not yield anything kernel-related. Will try again tomorrow and the following days and report on the results. > In the upstream kernel in drivers/gpu/drm/amd I saw a number of commits since > version 5.16.7 (and also several other commits which are part of 5.16.12 > which > is present in salsa, but not yet released). > > When I look at the photo from https://bugs.debian.org/1006149#44 (from Axel), > I do notice an important difference: > He has various [drm] messages, whereas I see none of those with you. > Do you have [drm] messages when booting with the 5.15 kernel? Grepping for "drm" in kernel-5.15-log-T41.txt : Mar 6 09:53:25 netty kernel: [ 51.179666] [drm] radeon kernel modesetting enabled. Mar 6 09:53:25 netty kernel: [ 51.184860] [drm] initializing kernel modesetting (RV200 0x1002:0x4C57 0x1014:0x0530 0x00). Mar 6 09:53:25 netty kernel: [ 51.184896] [drm] Forcing AGP to PCI mode Mar 6 09:53:25 netty kernel: [ 51.187292] [drm] Detected VRAM RAM=128M, BAR=128M Mar 6 09:53:25 netty kernel: [ 51.187316] [drm] RAM width 64bits DDR Mar 6 09:53:25 netty kernel: [ 51.187383] [drm] radeon: 32M of VRAM memory ready Mar 6 09:53:25 netty kernel: [ 51.187392] [drm] radeon: 512M of GTT memory ready. Mar 6 09:53:25 netty kernel: [ 51.187417] [drm] GART: num cpu pages 131072, num gpu pages 131072 Mar 6 09:53:25 netty kernel: [ 51.192671] [drm] radeon: power management initialized Mar 6 09:53:25 netty kernel: [ 51.192720] [drm] PCI GART of 512M enabled (table at 0x0240). Mar 6 09:53:25 netty kernel: [ 51.195571] [drm] radeon: irq initialized. Mar 6 09:53:25 netty kernel: [ 51.195614] [drm] Loading R100 Microcode Mar 6 09:53:25 netty kernel: [ 51.195710] [drm:r100_cp_init [radeon]] *ERROR* Failed to load firmware! Mar 6 09:53:25 netty kernel: [ 51.195987] [drm] radeon: cp finalized Mar 6 09:53:25 netty kernel: [ 51.198852] [drm] Panel ID String: 1024x768 Mar 6 09:53:25 netty kernel: [ 51.198873] [drm] Panel Size 1024x768 Mar 6 09:53:25 netty kernel: [ 51.199136] [drm] No TV DAC info found in BIOS Mar 6 09:53:25 netty kernel: [ 51.199215] [drm] Radeon Display Connectors Mar 6 09:53:25 netty kernel: [ 51.199279] [drm] Connector 0: Mar 6 09:53:25 netty kernel: [ 51.199285] [drm] VGA-1 Mar 6 09:53:25 netty kernel: [ 51.199291] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 Mar 6 09:53:25 netty kernel: [ 51.199302] [drm] Encoders: Mar 6 09:53:25 netty kernel: [ 51.199308] [drm] CRT1: INTERNAL_DAC1 Mar 6 09:53:25 netty kernel: [ 51.199315] [drm] Connector 1: Mar 6 09:53:25 netty kernel: [ 51.199320] [drm] DVI-D-1 Mar 6 09:53:25 netty kernel: [ 51.199326] [drm] HPD1 Mar 6 09:53:25 netty kernel: [ 51.199331] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 Mar 6 09:53:25 netty kernel: [ 51.199341] [drm] Encoders: Mar 6 09:53:25 netty kernel: [ 51.199347] [drm] DFP1: INTERNAL_TMDS1 Mar 6 09:53:25 netty kernel: [ 51.199353] [drm] Connector 2: Mar 6 09:53:25 netty kernel: [ 51.199358] [drm] LVDS-1 Mar 6 09:53:25 netty kernel: [ 51.199364] [drm] Encoders: Mar 6 09:53:25 netty kernel: [ 51.199369] [drm] LCD1: INTERNAL_LVDS Mar 6 09:53:25 netty kernel: [ 51.199375] [drm] Connector 3: Mar 6 09:53:25 netty kernel: [
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Update for linux-image-5.16.0-3-686 : On Sat 19 Feb 2022 at 22:04:14 +0100 Petra R.-P. wrote: [...] > After the lines > >Loading Linux 5.16.0-1-686 ... Now of course: s/-1-/-3-/ >Loading initial ramdisk ... > > the screen gets flushed, and I see: > >[ 4.xx] ata1.00: Read log 0x00 page 0x00 failed Emask 0x1 > The "Read log 0x00 page 0x00 failed" line has disappeared, the endlessly blinking cursor remains in the upper left corner of the screen. Nothing else happens. This is again reproducible on both T41 Thinkpads. Regards, Petra
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Hello Diederik, Thanks for your quick reply: Am Sa., 19. Feb. 2022, um 22:36 +0100 schrieb Diederik de Haas : > On Saturday, 19 February 2022 22:04:14 CET Petra R.-P. wrote: > > Package: src:linux > > Version: 5.16.7-2 [...] > > pn firmware-iwlwifi > > I see you don't have firmware-iwlwifi installed, but there have been other > bug > reports which could be similar, so with the 5.15 kernel, do you have the > 'iwlwifi' kernel module loaded? On one of the old Thinkpads in question, running the 5.15 kernel: ~ > lsmod | grep iwlwifi ~ > lsmod | grep wifi ~ > So I suppose that module is _not_ loaded ... > If so, could you blacklist that and try to > reboot into the 5.16 kernel and see whether it then works? Nevertheless, I created /etc/modprobe.d/blacklist.conf as root, and: ~ > cat /etc/modprobe.d/blacklist.conf blacklist iwlwifi ~ > Sadly, this has no effect whatsoever on the 5.16.0-1 kernel. When trying to boot it it 'hangs' exactly as before. Thanks all the same, and best regards, Petra
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Package: src:linux Version: 5.16.7-2 Severity: critical Justification: breaks the whole system Dear Maintainer, This new kernel version does not boot on two fairly similar old IBM T41 Thinkpads. What reproducibly happens is as follows: After the lines Loading Linux 5.16.0-1-686 ... Loading initial ramdisk ... the screen gets flushed, and I see: [ 4.xx] ata1.00: Read log 0x00 page 0x00 failed Emask 0x1 The "xx" vary for every try. Then nothing else happens. Ctrl-Alt-Del has no effect. I have to reset the computer by pressing the button. On an old PC running the same kernel the same message "ata1.00: Read log ..." appears, but then the boot process continues normally. linux-image-5.15.0-3-686, which I am using to write this message, runs fine. Thanks for maintaining this package and best regards, Petra R.-P. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03) Subsystem: IBM Thinkpad T40 series [1014:0529] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM ThinkPad [1014:052d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Kernel driver in use: snd_intel8x0 Kernel modules: snd_intel8x0 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic]) Subsystem: IBM ThinkPad T4x Series [1014:0524] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: snd_intel8x0m Kernel modules: snd_intel8x0m 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV200/M7 [Mobility Radeon 7500] [1002:4c57] (prog-if 00 [VGA controller]) Subsystem: IBM ThinkPad T4x Series [1014:0530] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: radeon Kernel modules: radeonfb, radeon 02:00.0 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01) Subsystem: IBM ThinkPad [1014:0552] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Capabilities: Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 02:00.1 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01) Subsystem: IBM ThinkPad [1014:0552] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B-
Bug#943664: xserver-xorg-video-radeon: Same behaviour on Thinkpad T41
Am Mo., 4. Nov. 2019, um 09:13 +0100 schrieb Michel Dänzer : > On 2019-11-01 5:25 p.m., Petra R.-P. wrote: > > > > Section "Device" > > Identifier "Configured Video Device" > > Driver"modesetting" > > EndSection [...] > On this machine, you need to add > > Option "AccelMethod" "none" > > to Section "Device". Thanks an awful lot! This solved the problem for me :-) Best regards, Petra
Bug#943664: xserver-xorg-video-radeon: Same behaviour on Thinkpad T41
Am Fr., 1. Nov. 2019, um 17:25 +0100 schrieb Petra R.-P. : > Maybe I should mention that this old notebook is running with an > external monitor because its own display is faulty. I have just performed the (weekly) Debian testing updates on my other computers (the problematic notebook I was writing about is updated on a daily basis): -> another Thinkpad T41, but with intact display and without external monitor, -> a Thinkpad T420, -> a "normal" PC. There was no problem with any of them :-) So the cause of the problem may well be the external monitor, or HW acceleration. How can I find out if this is activated in the "good" T41? Best regards, Petra
Bug#943664: xserver-xorg-video-radeon: Same behaviour on Thinkpad T41
On Thu 31 Oct 2019 at 20:39:18 +0100 Michel Dänzer wrote: > We'd again need to see the corresponding Xorg log file. 1. Modified /etc/X11/xorg.conf : # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" # Option"XkbVariant""nodeadkeys" Option"XkbOptions" "compose:caps" # P. R.-P., Mo., 25. Mai 2009 EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" EndSection Section "Device" Identifier "Configured Video Device" Driver"modesetting" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection 2. /home/petra/.local/share/xorg/Xorg.0.log : [ 451.063] X.Org X Server 1.20.4 X Protocol Version 11, Revision 0 [ 451.063] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian [ 451.064] Current Operating System: Linux netty 5.2.0-3-686 #1 SMP Debian 5.2.17-1 (2019-09-26) i686 [ 451.064] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-3-686 root=UUID=496e0e0a-6e7c-46c2-9132-315243394a2d ro framebuffer=false quiet fb=false systemd.show_status=true [ 451.065] Build Date: 05 March 2019 08:11:12PM [ 451.065] xorg-server 2:1.20.4-1 (https://www.debian.org/support) [ 451.065] Current version of pixman: 0.36.0 [ 451.066]Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 451.066] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 451.068] (==) Log file: "/home/petra/.local/share/xorg/Xorg.0.log", Time: Thu Oct 31 21:08:45 2019 [ 451.098] (==) Using config file: "/etc/X11/xorg.conf" [ 451.106] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 451.232] (==) No Layout section. Using the first Screen section. [ 451.232] (**) |-->Screen "Default Screen" (0) [ 451.232] (**) | |-->Monitor "Configured Monitor" [ 451.268] (==) No device specified for screen "Default Screen". Using the first device section listed. [ 451.268] (**) | |-->Device "Configured Video Device" [ 451.268] (==) Automatically adding devices [ 451.268] (==) Automatically enabling devices [ 451.268] (==) Automatically adding GPU devices [ 451.268] (==) Max clients allowed: 256, resource mask: 0x1f [ 451.369] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 451.369]Entry deleted from font path. [ 451.509] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 451.509] (==) ModulePath set to "/usr/lib/xorg/modules" [ 451.509] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 451.509] (II) Loader magic: 0x6eb740 [ 451.509] (II) Module ABI versions: [ 451.509]X.Org ANSI C Emulation: 0.4 [ 451.509]X.Org Video Driver: 24.0 [ 451.509]X.Org XInput driver : 24.1 [ 451.509]X.Org Server Extension : 10.0 [ 451.512] (++) using VT number 1 [ 451.519] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_35 [ 451.522] (II) xfree86: Adding drm device (/dev/dri/card0) [ 451.524] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0 [ 451.531] (--) PCI:*(1@0:0:0) 1002:4c57:1014:0530 rev 0, Mem @ 0xe000/134217728, 0xc010/65536, I/O @ 0x3000/256, BIOS @ 0x/131072 [ 451.551] (II) LoadModule: "glx" [ 451.589] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 452.136] (II) Module glx: vendor="X.Org Foundation" [ 452.136]compiled for 1.20.4, module version = 1.0.0 [ 452.136]ABI class: X.Org Server Extension, version 10.0 [ 452.136] (II) LoadModule: "modesetting" [
Bug#943664: xserver-xorg-video-radeon: Same behaviour on Thinkpad T41
Am Do., 31. Okt. 2019, um 18:01 +0100 schrieb Michel Dänzer : > On 2019-10-30 2:15 p.m., Petra R.-P. wrote: > This happens when HW acceleration is disabled. If you can't or don't > want to enable HW acceleration, I can't because I don't know how to do this. > I recommend using the Xorg modesetting > driver for the time being, by either uninstalling > xserver-xorg-video-radeon or explicitly setting the driver in > /etc/X11/xorg.conf, see below. Without HW acceleration, the radeon > driver doesn't really provide much if any benefit over modesetting. > > > Section "Device" > > Identifier "whateveryoulike" > > Driver "modesetting" > > EndSection I tried both variants without success. Both resulted in something like Server terminated with error (1). xinit: giving up xinit: unable to connect to X server: Conncection refused xinit: server error Old xserver-xorg-video-radeon 19.0.1-1 still works fine :-) Petra
Bug#943664: xserver-xorg-video-radeon: Same behaviour on Thinkpad T41
Package: xserver-xorg-video-radeon Version: 1:19.1.0-1 Followup-For: Bug #943664 Dear Maintainer, I can confirm every detail of the original report, except that this happens here on an old IBM Thinkpad T 41. -- Package-specific info: X server symlink status: lrwxrwxrwx 1 root root 13 May 22 2009 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 274 Mar 5 2019 /usr/bin/Xorg VGA-compatible devices on PCI bus: -- 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV200/M7 [Mobility Radeon 7500] [1002:4c57] Xorg X server configuration file status: -rw-r--r-- 1 root root 1183 May 25 2009 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: --- # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" # Option"XkbVariant""nodeadkeys" Option"XkbOptions" "compose:caps" # P. R.-P., Mo., 25. Mai 2009 EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" EndSection Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection /etc/X11/xorg.conf.d does not exist. KMS configuration files: /etc/modprobe.d/i915-kms.conf: options i915 modeset=1 /etc/modprobe.d/radeon-kms.conf: options radeon modeset=1 Kernel version (/proc/version): --- Linux version 5.2.0-3-686 (debian-ker...@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-22)) #1 SMP Debian 5.2.17-1 (2019-09-26) Xorg X server log files on system: -- -rw-r--r-- 1 root root 36267 Aug 8 2015 /var/log/Xorg.1.log -rw-r--r-- 1 root root 37471 Oct 25 2015 /var/log/Xorg.0.log -rw-r--r-- 1 petra petra 46383 Mar 10 2018 /home/petra/.local/share/xorg/Xorg.2.log -rw-r--r-- 1 petra petra 46383 Mar 10 2018 /home/petra/.local/share/xorg/Xorg.3.log -rw-r--r-- 1 petra petra 46383 Mar 10 2018 /home/petra/.local/share/xorg/Xorg.4.log -rw-r--r-- 1 petra petra 46383 Mar 10 2018 /home/petra/.local/share/xorg/Xorg.5.log -rw-r--r-- 1 petra petra 46383 Mar 10 2018 /home/petra/.local/share/xorg/Xorg.6.log -rw-r--r-- 1 petra petra 46383 Mar 10 2018 /home/petra/.local/share/xorg/Xorg.7.log -rw-r--r-- 1 petra petra 46383 Mar 10 2018 /home/petra/.local/share/xorg/Xorg.8.log -rw-r--r-- 1 petra petra 51769 Mar 10 2018 /home/petra/.local/share/xorg/Xorg.9.log -rw-r--r-- 1 petra petra 53220 Mar 10 2018 /home/petra/.local/share/xorg/Xorg.10.log -rw-r--r-- 1 petra petra 52334 Mar 10 2018 /home/petra/.local/share/xorg/Xorg.11.log -rw-r--r-- 1 petra petra 54232 Mar 10 2018 /home/petra/.local/share/xorg/Xorg.12.log -rw-r--r-- 1 petra petra 37588 Oct 30 13:52 /home/petra/.local/share/xorg/Xorg.1.log -rw-r--r-- 1 petra petra 24233 Oct 30 14:05 /home/petra/.local/share/xorg/Xorg.0.log Contents of most recent Xorg X server log file (/home/petra/.local/share/xorg/Xorg.0.log): -- [ 122.848] X.Org X Server 1.20.4 X Protocol Version 11, Revision 0 [ 122.849] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian [ 122.849] Current Operating System: Linux netty 5.2.0-3-686 #1 SMP Debian 5.2.17-1 (2019-09-26) i686 [ 122.850] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-3-686 root=UUID=496e0e0a-6e7c-46c2-9132-315243394a2d ro framebuffer=false quiet fb=false systemd.show_status=true [ 122.850] Build Date: 05 March 2019 08:11:12PM [ 122.851] xorg-server 2:1.20.4-1 (https://www.debian.org/support) [ 122.851] Current version of pixman: 0.36.0 [ 122.851]Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 122.851] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not
