Bug#1010775: wpasupplicant 2:2.10-8~bpo11+1 in bullseye-backports creates an unmet dependency issue with network-manager 1.30.0-2 in bullseye

[Wright, Randy (HPE Servers Linux)]

On Wed, 11 May 2022 09:11:21 -0700 "Milesa & Richard Griswold" 
 wrote:

> sudo dpkg -i *.deb

Me too.

I had a similar experience to that related in comment 10, requiring
re-installation of  network-manager and dependencies from .deb files.
Due to the dependency problem between wpasupplicant and network-manager,
removing network-manager may be offered as a mitigation by apt and
accepted without consideration of the consequences.And if that
happens, transferring the .deb files needed to correct the issue from
another system may be necessary.   Another approach on a relatively
simple network may be to configure networking with manual tools such as
ip, ifconfig, and route, after which recovery with apt can be effected.

In light of the severe consequences that may be encountered, is 
it possible that the 2:2.10-8-bpo11+1 version of wpasupplicant
can be be removed from bullseye-backports until the required
network-manager version can be added?

-- 
Randy Wright - Hewlett Packard Enterprise - rwri...@hpe.com

Bug#995125: linux: Realtek ethernet driver r8169 lacks support for chip chip XID 54b

[Wright, Randy (HPE Servers Linux)]

I am pleased to report that commit e6d6ca6e12049dfbff6ac8b029678d2d2c55c34f 
does provide the
support for chip XID 54b.   However, I had to apply two other patches, and 
temporarily revert and
then re-apply a third patch to apply to the linux-source-5.10 kernel version  
5.10.46-5.

Attached is the bash script I used to apply the patches, which are the 
following:

389cb1ecc86e6c6f210424017cf930a81ddfbf2d..e6d6ca6e12049dfbff6ac8b029678d2d2c55c34f.patch
e6e918d4eb93f43e770fbc2a0881686e350e1a1f..c6cff9dfebb3387fa72570af70c9ea34b9e24550.patch
0a7e0c3b5702a6a76cf7e5b8cc10a73e51dc221e..abbf9a0ef8848dca58c5b97750c1c59bbee45637.patch
206a75e003e17aad4fd60047deee2252fdc3df38..e0d38b5880758432f74fe17fea8281691d1eb3c0.patch

With the patch built in, success is seen in dmesg logs, and NetworkManager uses 
the nic with no problems.
[0.00] Linux version 5.10.46-rfw (rfw@pd400) (gcc (Debian 10.2.1-6) 
10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sat Oct 2 
10:35:02 MDT 2021
[0.00] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.46-rfw 
root=UUID=85ed9906-0d36-41ca-bfdf-9434fe5ecd2c ro loglevel=9 efi=debug 
nohibernate noresume panic=30 systemd.unit=multi-user.target
[0.015860] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.46-rfw 
root=UUID=85ed9906-0d36-41ca-bfdf-9434fe5ecd2c ro loglevel=9 efi=debug 
nohibernate noresume panic=30 systemd.unit=multi-user.target
[2.056883] BOOT_IMAGE=/boot/vmlinuz-5.10.46-rfw
[2.464025] usb usb1: Manufacturer: Linux 5.10.46-rfw ehci_hcd
[6.670346] r8169 :04:00.1: can't disable ASPM; OS doesn't have ASPM 
control
[6.690573] libphy: r8169: probed
[6.695550] r8169 :04:00.1 eth0: RTL8168fp/RTL8117, b0:22:7a:22:c7:e7, 
XID 54b, IRQ 85
[6.698093] r8169 :04:00.1 eth0: jumbo features [frames: 9194 bytes, tx 
checksumming: ko]
[7.056330] r8169 :04:00.1 eno1: renamed from eth0
[7.912710] Generic FE-GE Realtek PHY r8169-401:00: attached PHY driver 
[Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-401:00, irq=IGNORE)
[8.042714] r8169 :04:00.1 eno1: Link is Down
[   10.467835] r8169 :04:00.1 eno1: Link is Up - 1Gbps/Full - flow control 
rx/tx

- Randy Wright   rwri...@hpe.com



patchit.sh
Description: patchit.sh

Bug#995125: linux: Realtek ethernet driver r8169 lacks support for chip chip XID 54b

[Wright, Randy (HPE Servers Linux)]

> The upstream commit which appears to add the support is 
> https://git.kernel.org/linus/e6d6ca6e12049dfbff6ac8b029678d2d2c55c34f
> Is this enough?

The nominated patch:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/patch/?id=e6d6ca6e12049dfbff6ac8b029678d2d2c55c34f
appears from inspection to support the chip 0x54b that I reported.

If your question is whether this patch alone suffices, I found
it will not apply cleanly on the version of 
drivers/net/ethernet/realtek/r8169_main.c 
found in the bullseye 5.10.46 kernel.  I will attach the log from:

debian/bin/test-patches -f amd64 -j 6 
./389cb1ecc86e6c6f210424017cf930a81ddfbf2d..e6d6ca6e12049dfbff6ac8b029678d2d2c55c34f.patch
 

I will attempt to identify a small set of predecessor patches that permit the 
nominated
patch to be installed.

- Randy Wright - rwri...@hpe.comPYTHONHASHSEED=0 debian/bin/gencontrol.py
md5sum debian/bin/gencontrol.py debian/build/version-info 
debian/templates/control.config.in debian/templates/control.docs.in 
debian/templates/control.docs.meta.in debian/templates/control.extra.in 
debian/templates/control.headers.featureset.in 
debian/templates/control.headers.in debian/templates/control.headers.meta.in 
debian/templates/control.image-dbg.in 
debian/templates/control.image-dbg.meta.in debian/templates/control.image.in 
debian/templates/control.image.meta.in 
debian/templates/control.image-unsigned.in debian/templates/control.libc-dev.in 
debian/templates/control.main.in debian/templates/control.signed-template.in 
debian/templates/control.sourcebin.in 
debian/templates/control.sourcebin.meta.in debian/templates/control.source.in 
debian/templates/control.tools-unversioned.in 
debian/templates/control.tools-versioned.in 
debian/templates/control.tools-versioned.meta.in 
debian/templates/docs.meta.maintscript.in 
debian/templates/headers.meta.maintscript.in 
debian/templates/headers.postinst.in 
debian/templates/image-dbg.lintian-overrides.in 
debian/templates/image-dbg.meta.lintian-overrides.in 
debian/templates/image-dbg.meta.maintscript.in 
debian/templates/image.meta.bug-presubj.in 
debian/templates/image.meta.maintscript.in debian/templates/image.postinst.in 
debian/templates/image.postrm.in debian/templates/image.preinst.in 
debian/templates/image.prerm.in debian/templates/perf.lintian-overrides.in 
debian/templates/perf.meta.maintscript.in 
debian/templates/sourcebin.meta.maintscript.in 
debian/templates/tests-control.image.in debian/templates/tests-control.main.in 
debian/config/defines debian/config/alpha/defines debian/config/amd64/defines 
debian/config/arm64/defines debian/config/arm64ilp32/defines 
debian/config/armel/defines debian/config/armhf/defines 
debian/config/featureset-rt/defines debian/config/hppa/defines 
debian/config/i386/defines debian/config/ia64/defines 
debian/config/m68k/defines debian/config/mips64/defines 
debian/config/mips64el/defines debian/config/mips64r6/defines 
debian/config/mips64r6el/defines debian/config/mips/defines 
debian/config/mipsel/defines debian/config/mipsn32/defines 
debian/config/mipsn32el/defines debian/config/mipsn32r6/defines 
debian/config/mipsn32r6el/defines debian/config/mipsr6/defines 
debian/config/mipsr6el/defines debian/config/powerpc/defines 
debian/config/ppc64/defines debian/config/ppc64el/defines 
debian/config/riscv64/defines debian/config/s390/defines 
debian/config/s390x/defines debian/config/sh3/defines debian/config/sh4/defines 
debian/config/sparc64/defines debian/config/sparc/defines 
debian/config/x32/defines debian/config/amd64/none/defines 
debian/config/amd64/rt/defines debian/config/arm64/none/defines 
debian/config/arm64/rt/defines debian/config/armhf/none/defines 
debian/config/armhf/rt/defines debian/config/i386/none/defines 
debian/config/i386/rt/defines debian/config/riscv64/none/defines 
debian/installer/kernel-versions debian/installer/package-list > 
debian/control.md5sum

This target is made to fail intentionally, to make sure
that it is NEVER run during the automated build. Please
ignore the following error, the debian/control file has
been generated SUCCESSFULLY.

exit 1
make: *** [debian/rules:122: debian/control-real] Error 1
dh_testdir
rm -rf debian/build debian/stamps debian/lib/python/debian_linux/*.pyc 
debian/lib/python/debian_linux/__pycache__ $(find debian -maxdepth 1 -type d 
-name 'linux-*') debian/*-modules-*-di* debian/kernel-image-*-di* debian/*-tmp 
debian/*.substvars
dh_clean
mkdir -p debian/build
printf >debian/build/version-info 'Source: %s\nVersion: %s\n' linux 
5.10.46-5a~test
md5sum --check debian/control.md5sum --status || \
/usr/bin/make -f debian/rules debian/control-real
dh_testdir
/usr/bin/make -f debian/rules.gen source
make[1]: Entering directory '/usr/src/linux-5.10.46'
/usr/bin/make -f debian/rules.real source-featureset ABINAME='5.10.0-8' 
FEATURESET='none' SOURCEVERSION='5.10.46-5a~test' SOURCE_BASENAME='linux' 
SOURCE_SUFFIX='' UPSTREAMVERSION='5.10' VERSIO

Bug#966287: deluged: deluge does not integrate with systemd nor install in a usable state

[Randy Edwards]

Package: deluged
Version: deluged
Severity: wishlist

Dear Maintainer,

deluged does not integrate with the systemd init system. Easy instructions to
do that are in https://deluge.readthedocs.io/en/latest/how-to/systemd-
service.html

deluged should be minimally installed/configured to come up in some usable
state with example configurations or minimal notes in /usr/share/doc/deluged



-- System Information:
Debian Release: 10.4
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.19.0-9-amd64 (SMP w/16 CPU cores)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE= 
(charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages deluged depends on:
ii  adduser3.118
ii  deluge-common  1.3.15-2
ii  lsb-base   10.2019051400
ii  python 2.7.16-1
ii  python-libtorrent  1.1.11-2

deluged recommends no packages.

deluged suggests no packages.

Bug#963101: cozy-audiobook-player: "Request For Package"

[Randy Edwards]

Package: cozy-audiobook-player
Version: "Request For Package
Severity: wishlist

Dear Maintainer,

This is a request to package Cozy, a slick GPLed GUI audiobook player for
Linux.

You can grab the source and more info at https://github.com/geigi/cozy or
https://cozy.geigi.de/



-- System Information:
Debian Release: 10.4
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.19.0-9-amd64 (SMP w/16 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Bug#926241: noarch

[Randy Barlow]

We did something like this in Fedora, if you are interested in
considering a similar implementation. We decided to make pure Erlang
packages be what we call "noarch" packages, and to move those into
/usr/share/erlang/lib. Let me know if this interests you and I can
point you at patches we have for it.


signature.asc
Description: This is a digitally signed message part

Bug#905873: debootstrap: trusty and xenial not included in merged-usr blacklist

[Randy Goldenberg]

Package: debootstrap
Version: 1.0.106
Severity: normal
Tags: patch

Dear Maintainer,

-- System Information:
Debian Release: stretch/sid
  APT prefers xenial-updates
  APT policy: (500, 'xenial-updates'), (500, 'xenial-security'), (500, 
'xenial'), (100, 'xenial-backports')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.4.0-131-generic (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

debootstrap 1.0.106 installs a merged-usr file system by default.  Distros that 
do not use a merged-usr file system are blacklisted in 
/usr/share/debootstrap/scripts/.  /usr/share/debootstrap/scripts/trusty and 
/usr/share/debootstrap/scripts/xenial are symlinked to 
/usr/share/debootstrap/scripts/gutsy.  The script for gutsy does not include 
trusty and xenial as distros blacklisted for merged-usr file system deployment. 
 Consequently, merged-usr file systems are set up, resulting in failure when 
installation of non-merged-usr packages is attempted.  Below please find patch 
to blacklist trusty and xenial from merged-usr file system deployment.

--- gutsy.a 2018-08-10 14:37:30.569331851 -0700
+++ gutsy.b 2018-08-10 14:32:24.633067670 -0700
@@ -68,7 +68,7 @@ work_out_debs () {
 first_stage_install () {
case "$CODENAME" in
# "merged-usr" blacklist for past releases
-   
gutsy|hardy|intrepid|jaunty|karmic|lucid|maverick|natty|oneiric|precise|quantal|raring|saucy|utopic|vivid|wily|yakkety|zesty|artful|bionic|cosmic)
+   
gutsy|hardy|intrepid|jaunty|karmic|lucid|maverick|natty|oneiric|precise|quantal|raring|saucy|trusty|utopic|vivid|wily|xenial|yakkety|zesty|artful|bionic|cosmic)
[ -z "$MERGED_USR" ] && MERGED_USR="no"
;;
*)

Bug#832127: Test::Aggregate: pending removal from Debian

[Randy Stauner]

I am the most recent releaser, but I do not have time to work on this (or 
anything perl, sadly) any more.

- Randy

On Mon, Jul 23, 2018, at 21:02, intrigeri wrote:
> Hi,
> 
> The Debian perl group is reviewing packages with bugs which make them
> un-releasable; in particular when they are not heavily used by Debian
> users. We would like to remove such modules from Debian if we don't
> think they are likely to be fixed.
> 
> Test::Aggregate is one such module, owing to
> https://rt.cpan.org/Public/Bug/Display.html?id=100035 (aka.
> https://github.com/rwstauner/test-aggregate/issues/2 and
> https://bugs.debian.org/832127), and we would like to know whether you
> have any plans to look at the bug in the foreseeable future before we
> remove the package from Debian.
> 
> If we don't hear anything we will remove the package from Debian
> around the end of August. This of course does not affect the standing
> of your module on CPAN.
> 
> Thank you for maintaining this module so far!
> -- 
> intrigeri

Bug#897199: cec-utils not installable wrong depends

[Randy]

Package: cec-utils 
Version: 4.0.1+dfsg1-1

:~$ sudo apt install cec-utils
Reading package lists... Done
Building dependency tree   
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 cec-utils : Depends: libcec4 (= 4.0.1+dfsg1-1) but 2:4.0.2-dmo1 is to be 
installed
E: Unable to correct problems, you have held broken packages.
:~$ 

Regularly updated from

/etc/apt/sources.list
# Stable
   
deb http://ftp.us.debian.org/debian/ stretch main contrib non-free  
   
deb-src http://ftp.us.debian.org/debian/ stretch main contrib non-free  
   

   
deb http://security.debian.org/ stretch/updates main contrib non-free   
   
deb-src http://security.debian.org/ stretch/updates main contrib non-free 

/etc/apt/sources.list.d 
opera-stable.list
virtualbox.list
webmin.list
winswitch.list

/etc/debian_version 9.4
uname -r  4.9.0-6-amd64
kde


If it ain't broke tweek it

Bug#814558: libglib2.0-0-dbg: GDB backtrace decoration broken at armhf

[Randy Li]

Package: libglib2.0-0-dbg
Status: install ok installed
Priority: extra
Section: debug
Installed-Size: 11485
Maintainer: Debian GNOME Maintainers 
<pkg-gnome-maintain...@lists.alioth.debian.org>

Architecture: armhf
Multi-Arch: same
Source: glib2.0
Version: 2.50.1-1

at stretch
--
Randy Li
The third produce department
===
This email message, including any attachments, is for the sole
use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message. [Fuzhou Rockchip Electronics, INC. China mainland]
===

Bug#826790: libset-scalar-perl: Package doesn't support multi-arch

[Randy Li]

Package: libva-dev
Source: libva
Version: 1.7.2-1
Installed-Size: 680
Maintainer: Debian Multimedia Maintainers 


Architecture: amd64
Depends: libva-drm1 (= 1.7.2-1), libva-egl1 (= 1.7.2-1), libva-glx1 (= 
1.7.2-1), libva-tpi1 (= 1.7.2-1), libva-wayland1 (= 1.7.2-1), 
libva-x11-1 (= 1.7.2-1), libva1 (= 1.7.2-1), libwayland-dev (>= 1.0.0), 
libset-scalar-perl


It problem still exists. I think the problem is that libset-scalar-perl 
is a non-arch package, which could use the build interrupter. But the 
multiarch didn't regard it as non-arch.

Bug#823061: Randy-✉-Message-on-hold-

[Randy Power]

Hello











* _Just_saw_something_really_hot_that_made_me_wonder...
_What_would_you_like_me_to_wear_tonight?_
_What's_the_hottest_thing_I_can_do_for_you_when_I_see_you?_
We'll_even_play_some_games_honey_
_you_just_guess_what_color_my_panties_are,_then_I'll_give_you_whatever_you_want_;)
register_and_add_my_nickname_:angelicax3 u_ns__ub optout
 *

Bug#797004: mysql-server 5.5.44-0+deb8u1 not installable on fresh install of Stretch

[Randy]

Package: mysql-server-5.5
Version: 5.5.44-0+deb8u1
Severity: important

Dear Maintainer, 

   * What led up to the situation?
Trying to setup MythTV which requires mysql-server. Tried to install and it 
failed.  This machine is a fresh install of Stretch (testing).  If I remember 
right, been a week since, mariadb was removed so mysql could be installed

I have searched but not found this exact issue.  When the install is attempted 
it asks for a root password then fails.

from /var/log/mysql/error.log

150826 14:30:29 mysqld_safe Starting mysqld daemon with databases from 
/var/lib/mysql
150826 14:30:29 [Warning] Using unique option prefix key_buffer instead of 
key_buffer_size is deprecated and will be removed in a future release. Please 
use the full
name instead.
150826 14:30:29 [Note] /usr/sbin/mysqld (mysqld 5.5.44-0+deb8u1) starting as
process 30358
150826 14:30:29 [Warning] Using unique option prefix myisam-recover instead of 
myisam-recover-options is deprecated and will be removed in a future release. 
Please use
the full name instead.
150826 14:30:29 [Note] Plugin 'FEDERATED' is disabled.
/usr/sbin/mysqld: Table 'mysql.plugin' doesn't exist
150826 14:30:29 [ERROR] Can't open the mysql.plugin table. Please run 
mysql_upgrade to create it.
150826 14:30:29 InnoDB: The InnoDB memory heap is disabled
150826 14:30:29 InnoDB: Mutexes and rw_locks use GCC atomic builtins
150826 14:30:29 InnoDB: Compressed tables use zlib 1.2.8
150826 14:30:29 InnoDB: Using Linux native AIO
150826 14:30:29 InnoDB: Initializing buffer pool, size = 128.0M
150826 14:30:29 InnoDB: Completed initialization of buffer pool
150826 14:30:29 InnoDB: highest supported file format is Barracuda.
150826 14:30:29  InnoDB: Waiting for the background threads to start
150826 14:30:30 InnoDB: 5.5.44 started; log sequence number 1595675
150826 14:30:30 [ERROR] /usr/sbin/mysqld: unknown variable 'plugin-load-
add=unix_socket=auth_socket.so'
150826 14:30:30 [ERROR] Aborting

150826 14:30:30  InnoDB: Starting shutdown...
150826 14:30:31  InnoDB: Shutdown completed; log sequence number 1595675
150826 14:30:31 [Note] /usr/sbin/mysqld: Shutdown complete

150826 14:30:31 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid  
ended  


-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.1.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages mysql-server-5.5 depends on:
ii  adduser  3.113+nmu3
ii  debconf [debconf-2.0]  1.5.57
ii  initscripts  2.88dsf-59.2
ii  libc62.19-19
ii  libdbi-perl  1.633-1
ii  libgcc1  1:5.1.1-14
ii  libstdc++6   5.1.1-14
ii  lsb-base 4.1+Debian14
ii  mysql-client-5.5   5.5.44-0+deb8u1
ii  mysql-common 5.5.44-0+deb8u1
ii  mysql-server-core-5.5  5.5.44-0+deb8u1
ii  passwd   1:4.2-3
ii  perl 5.20.2-6
ii  psmisc   22.21-2
ii  zlib1g   1:1.2.8.dfsg-2+b1

Versions of packages mysql-server-5.5 recommends:
ii  libhtml-template-perl  2.95-2

Versions of packages mysql-server-5.5 suggests:
ii  heirloom-mailx [mailx]  12.5-5
pn  tinyca  none

-- debconf information:
  mysql-server/no_upgrade_when_using_ndb:
  mysql-server-5.5/postrm_remove_databases: false
* mysql-server/password_mismatch:
* mysql-server/error_setting_password:
  mysql-server-5.5/start_on_boot: true
  mysql-server-5.5/really_downgrade: false
  mysql-server-5.5/nis_warning:
-- 
If it ain't broke tweek it

Bug#797004: [debian-mysql] Bug#797004: mysql-server 5.5.44-0+deb8u1 not installable on fresh install of Stretch

[Randy]

On Wednesday, August 26, 2015 11:10:24 PM you wrote:
 2015-08-26 22:40 GMT+03:00 Randy thejun...@gmail.com:
  Trying to setup MythTV which requires mysql-server. Tried to install and
  it
 
 I don't see that there even is any package mythtv in Debian.
 
 https://packages.debian.org/search?keywords=mythtvsearchon=namessuite=all;
 section=all
 
 Are you using some 3rd party repository? MythTV depend on
 mysql-server-virtual, which can be satisfied with any version or
 variant of mysql. If MythTV really only accepts certain mysql-server
 package, then you should file a bug against MythTV.

This has nothing to do with mythtv, I have not even tried to install it yet!  
I have tried to install zoneminder though.  Either way mysql-server will not 
install on this system, which is a fresh install, new hardware, new system.

-- 
If it ain't broke tweek it

Bug#797004: [debian-mysql] Bug#797004: mysql-server 5.5.44-0+deb8u1 not installable on fresh install of Stretch

[Randy]

On Wednesday, August 26, 2015 11:06:32 PM you wrote:
 Downgrading from MariaDB 10.0 or MySQL 5.6 back to old MySQL 5.5 isn't
 supported and in many cases impossible.
 
 If you want to do that, then purge the old installation so that there
 are no configs or databases of the new format left behind, and then
 install MySQL 5.5. from scratch.

I was not aware that MariaDB had superceeded mysql.  Will try reinstalling it 
as it was removed to install mysql.

-- 
If it ain't broke tweek it

Bug#775886: RFS: objeck-lang-amd64/3.3.5-2-1

[Randy Hollines]

Hi Antti,

Thanks for the feedback. I'm going to make some updates over the next week.

Regards,
Randy

On Sun, Mar 22, 2015 at 2:08 PM, Antti Järvinen antti.jarvi...@katiska.org
wrote:

 -BEGIN PGP SIGNED MESSAGE-
 Hash: SHA1

 Randy Hollines obj...@gmail.com writes:
  I am looking for a sponsor for my package objeck-lang-amd64

 Great.

 I'm no DD so I can't sponsor your package but I can give comments
 regarding quality of your package.

  - Question: looks like most of the compiler and runtime (inside
src/vm/...?) is written in C++ - is it so that due to some constraint
the sw is only usable in amd64 hw ; or could the architecture be
Any? Jit-compiler maybe?
  - In debian/control the long description might be longer. According
to homepage content, there is already quite set of features in
the language .. as a programmer choosing a programming language
I might be intested in knowing a bit about features, design goals,
what is it really good for etc. ?
  - debian/docs is 0 bytes long ; I think it might be removed if it
is empty.
  - debian/README.source is from template, if there is no description
about source package required, the file may be deleted
  - a debian/watch -file could be very useful and works well
with github, see man uscan for examples.
  - It might be easier if the sources inside .orig.tar.gz would
be inside directory named packagename-version instead of src.
  - Lintian gives warnings
 W: objeck-lang: hardening-no-relro usr/bin/obc
 W: objeck-lang: hardening-no-relro usr/bin/obd
 W: objeck-lang: hardening-no-relro usr/bin/obr
 W: objeck-lang: hardening-no-relro usr/bin/obu
 W: objeck-lang: hardening-no-relro usr/lib/objeck-lang/libobjk_odbc.so
 W: objeck-lang: hardening-no-relro
 usr/lib/objeck-lang/libobjk_openssl.so
 W: objeck-lang: postinst-has-useless-call-to-ldconfig
 W: objeck-lang: postrm-has-useless-call-to-ldconfig
about binary package.
  + Big plus: does what is promised. In your website the hello-world
tutorial works better if I save the source code to file
called ~hello.obs~ instead of hello.obe as instructed.

 - --
 Antti Järvinen

 -BEGIN PGP SIGNATURE-
 Version: GnuPG v1
 Comment: Processed by Mailcrypt 3.5.8 http://mailcrypt.sourceforge.net/

 iD8DBQFVDy8yUTdja+nNMWMRAucOAJ0VWpB//LfYSMhcToFqmGvAfnC6qQCeLGj+
 3Y/LXK97wwQR3sBH6X3EBns=
 =tGPo
 -END PGP SIGNATURE-

Bug#775946: RFS: objeck-lang-i386/3.3.5-2-1 [ITP] -- Objeck Programming Language

[Randy Hollines]

Package: sponsorship-requests
  Severity: normal

  Dear mentors,

  I am looking for a sponsor for my package objeck-lang-i386

 * Package name: objeck-lang-i386
   Version : 3.3.5-2-1
   Upstream Author : Randy Hollines obj...@gmail.com
 * URL : http://www.objeck.org/
 * License : BSD-2-Clause
   Section : devel

  It builds these binary packages:

obc - source code compiler
obr - runtime system
obd - interactive debugger
obu - library inspection tool

  To access further information about this package, please visit the
following URL:

  http://mentors.debian.net/package/objeck-lang-i386


  Alternatively, one can download the package with dget using this command:

dget -x
http://mentors.debian.net/debian/pool/main/o/objeck-lang-i386/objeck-lang-i386_3.3.5-2-1.dsc

  More information about objeck-lang can be obtained from
http://www.objeck.org/ and https://github.com/objeck/objeck-lang.

  Changes since the last upload: none

  objeck-lang-i386 (3.3.5-2-1) unstable; urgency=low

  * Initial Release

 -- Randy Hollines obj...@gmail.com  Tue, 20 Jan 2015 08:02:00 -0800

  Regards,
   Randy Hollines

Bug#775947: RFS: objeck-lang-amd64/3.3.5-2-1 [ITP] -- Objeck Programming Language

[Randy Hollines]

Package: sponsorship-requests
  Severity: normal

  Dear mentors,

  I am looking for a sponsor for my package objeck-lang-amd64

 * Package name: objeck-lang-amd64
   Version : 3.3.5-2-1
   Upstream Author : Randy Hollines obj...@gmail.com
 * URL : http://www.objeck.org/
 * License : BSD-2-Clause
   Section : devel

  It builds these binary packages:

obc - source code compiler
obr - runtime system
obd - interactive debugger
obu - library inspection tool

  To access further information about this package, please visit the
following URL:

  http://mentors.debian.net/package/objeck-lang-amd64


  Alternatively, one can download the package with dget using this command:

dget -x
http://mentors.debian.net/debian/pool/main/o/objeck-lang-amd64/objeck-lang-amd64_3.3.5-2-1.dsc

  More information about objeck-lang can be obtained from
http://www.objeck.org/ and https://github.com/objeck/objeck-lang.

  Changes since the last upload: none

  objeck-lang-amd64 (3.3.5-2-1) unstable; urgency=low

  * Initial Release

 -- Randy Hollines obj...@gmail.com  Tue, 20 Jan 2015 08:02:00 -0800

  Regards,
   Randy Hollines

Bug#775886: RFS: objeck-lang-amd64/3.3.5-2-1

[Randy Hollines]

Package: sponsorship-requests
  Severity: normal

  Dear mentors,

  I am looking for a sponsor for my package objeck-lang-amd64

 * Package name: objeck-lang-amd64
   Version : 3.3.5-2-1
   Upstream Author : Randy Hollines obj...@gmail.com
 * URL : http://www.objeck.org/
 * License : BSD-2-Clause
   Section : devel

  It builds these binary packages:

obc - source code compiler
obr - runtime system
obd - interactive debugger
obu - library inspection tool

  To access further information about this package, please visit the
following URL:

  http://mentors.debian.net/package/objeck-lang-amd64


  Alternatively, one can download the package with dget using this command:

dget -x
http://mentors.debian.net/debian/pool/main/o/objeck-lang-amd64/objeck-lang-amd64_3.3.5-2-1.dsc

  More information about objeck-lang can be obtained from
http://www.objeck.org/ and https://github.com/objeck/objeck-lang.

  Changes since the last upload: none

  objeck-lang-amd64 (3.3.5-2-1) unstable; urgency=low

  * Initial release
  * Optimized stack operations for floating point operations
  * Added missing compiler check for array assignment to array element

 -- Randy Hollines obj...@gmail.com  Tue, 20 Jan 2015 08:02:00 -0800

  Regards,
   Randy Hollines

Bug#775887: objeck-lang-i386/3.3.5-2-1

[Randy Hollines]

Package: sponsorship-requests
  Severity: normal

  Dear mentors,

  I am looking for a sponsor for my package objeck-lang-i386

 * Package name: objeck-lang-i386
   Version : 3.3.5-2-1
   Upstream Author : Randy Hollines obj...@gmail.com
 * URL : http://www.objeck.org/
 * License : BSD-2-Clause
   Section : devel

  It builds these binary packages:

obc - source code compiler
obr - runtime system
obd - interactive debugger
obu - library inspection tool

  To access further information about this package, please visit the
following URL:

  http://mentors.debian.net/package/objeck-lang-i386


  Alternatively, one can download the package with dget using this command:

dget -x
http://mentors.debian.net/debian/pool/main/o/objeck-lang-i386/objeck-lang-i386_3.3.5-2-1.dsc

  More information about objeck-lang can be obtained from
http://www.objeck.org/ and https://github.com/objeck/objeck-lang.

  Changes since the last upload: none

  objeck-lang-i386 (3.3.5-2-1) unstable; urgency=low

  * Initial release
  * Optimized stack operations for floating point operations
  * Added missing compiler check for array assignment to array element

 -- Randy Hollines obj...@gmail.com  Tue, 20 Jan 2015 08:02:00 -0800

  Regards,
   Randy Hollines

Bug#774277: installation-reports

[Randy G]

Package: installation-reports

Boot method: USB Stick
Image version:
http://cdimage.debian.org/cdimage/jessie_di_beta_2/i386/iso-cd/debian-jessie-DI-b2-i386-netinst.iso
Date: 12/27/2014 15:00

Machine: Dell Inspiron 6000
Processor:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.86GHz
stepping : 8
microcode : 0x20
cpu MHz : 800.000
cache size : 2048 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx bts est tm2
bogomips : 1595.76
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 32 bits virtual
power management:

Memory:
MemTotal:1031680 kB
MemFree:  107548 kB
MemAvailable: 304976 kB
Buffers:   27576 kB
Cached:   307520 kB
SwapCached: 6772 kB
Active:   416504 kB
Inactive: 446944 kB
Active(anon): 271828 kB
Inactive(anon):   291596 kB
Active(file): 144676 kB
Inactive(file):   155348 kB
Unevictable:  32 kB
Mlocked:  32 kB
HighTotal:141140 kB
HighFree:   8084 kB
LowTotal: 890540 kB
LowFree:   99464 kB
SwapTotal:   2048252 kB
SwapFree:1987188 kB
Dirty:96 kB
Writeback: 0 kB
AnonPages:522812 kB
Mapped:   133912 kB
Shmem: 35072 kB
Slab:  36872 kB
SReclaimable:  23944 kB
SUnreclaim:12928 kB
KernelStack:2712 kB
PageTables:10364 kB
NFS_Unstable:  0 kB
Bounce:0 kB
WritebackTmp:  0 kB
CommitLimit: 2564092 kB
Committed_AS:2590032 kB
VmallocTotal: 122880 kB
VmallocUsed:   13956 kB
VmallocChunk: 107784 kB
HardwareCorrupted: 0 kB
AnonHugePages: 0 kB
HugePages_Total:   0
HugePages_Free:0
HugePages_Rsvd:0
HugePages_Surp:0
Hugepagesize:   2048 kB
DirectMap4k:   38904 kB
DirectMap2M:  868352 kB

Partitions:
$ df -Tl
Filesystem Type  Size  Used Avail Use% Mounted on
/dev/sda6  ext4   20G  5.3G   13G  29% /
udev   devtmpfs   10M 0   10M   0% /dev
tmpfs  tmpfs 202M  5.0M  197M   3% /run
tmpfs  tmpfs 504M   34M  471M   7% /dev/shm
tmpfs  tmpfs 5.0M  4.0K  5.0M   1% /run/lock
tmpfs  tmpfs 504M 0  504M   0% /sys/fs/cgroup
/dev/sda11 ext3   39G  9.2G   28G  26% /home
/dev/sda12 ext3   77G   39G   35G  53% /data
tmpfs  tmpfs 101M  4.0K  101M   1% /run/user/116
tmpfs  tmpfs 101M  8.0K  101M   1% /run/user/1000


Output of lspci -knn (or lspci -nn):
$ lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: Dell Device [1028:0188]
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI
Express Root Port [8086:2591] (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
Subsystem: Dell Device [1028:0188]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
Subsystem: Dell Device [1028:0188]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
Subsystem: Dell Device [1028:0188]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
Subsystem: Dell Device [1028:0188]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
Subsystem: Dell Device [1028:0188]
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d3)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev
03)
Subsystem: Dell Inspiron 6000 laptop [1028:0188]
Kernel driver in use: snd_intel8x0
00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
AC'97 Modem Controller [8086:266d] (rev 03)
Subsystem: Conexant Systems, Inc. Device [14f1:5423]
Kernel driver in use: snd_intel8x0m
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge [8086:2641] (rev 03)
Subsystem: Dell Device [1028:0188]
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA
Controller [8086:2653] (rev 03)
Subsystem: Dell Device [1028:0188]
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller 

Bug#738440: cups: new version contains Ubuntu Bug #1019662

[Randy Reitz]

It was an adventure, but I finally made a new foomatic-rip.  It works!!

Along the way, I picked up:
rreitz@sheevaplug:~/cups-filters-1.0.43$ dpkg -l cups-filters
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name  Version ArchitectureDescription
+++-=-===-===-===
ii  cups-filters  1.0.44-2armel   OpenPrinting CUPS 
Filters - Main Package

which does not work, but I guess you know that.

I look forward to 1.0.44-3.

Thanks,
Randy

On Feb 11, 2014, at 2:45 AM, Didier 'OdyX' Raboud o...@debian.org wrote:

 Le lundi, 10 février 2014, 23.34:23 Till Kamppeter a écrit :
 I have fixed the problem upstream (BZR rev. 7159) now. I do not use
 PATH+MAX any more for strings which are used to hold a command line.
 Command lines have 65535 bytes now.
 
 Please test and tell whether it solves the problem. If so, I will
 release a new cups-filters version.
 
 At least it doesn't cause obvious regressions for me.
 
 Till: if you release a new version, can you include your fix for the 
 upstart job?
 
 Randy: can you recompile cups-filters on your platform with the attached 
 patch and confirm that it works?
 
 Cheers, 
 OdyXfoomatic-rip_Do_not_use_PATH_MAX_for_the_length_of_strings_which_are_supposed_to_hold_a_command_line.patch

Bug#480710:

[Randy Ledoux]

Bugs every

Bug#738440: cups: new version contains Ubuntu Bug #1019662

[Randy Reitz]

Package: cups-filters
Version: 1.0.43-1+b1

After installation of cups 1.7.1-2, HP LaserJet P1505 stopped working.

I found this Ubuntu bug:
https://bugs.launchpad.net/ubuntu/+source/foomatic-filters/+bug/1019662
that described what I saw in the error_log.

I downloaded foomatic-filters:
apt-get download foomatic-filters
Get:1 http://ftp.us.debian.org/debian/ jessie/main foomatic-filters armel 
4.0.17-1 [159 kB]

I extracted foomatic-rip and replaced the foomatic-rip from cups-filter.

Now the HP printer works.

Looks like the bug fix in foomatic-filters
did not get into cups-filters.

The cups-filters that installed with cups:
root@sheevaplug:/usr/lib/cups/filter# dpkg --list cups-filters
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name  Version   Architecture
  Description
+++-=-=-=-===
ii  cups-filters  1.0.43-1+b1   armel   
  OpenPrinting CUPS Filters

I am using:
root@sheevaplug:/usr/lib/cups/filter# uname -a
Linux sheevaplug 3.11-2-kirkwood #1 Debian 3.11.10-1 (2013-12-04) armv5tel 
GNU/Linux

Bug#718596: confirmed

[Randy]

Although  I use kde this downgrading obexd-client to the 
stable version made it so that I could transfer files.
-- 
Randy Batterbee

Take a trip with Torah and find out who you really are.

Open Source  Linux
if it ain't broke tweak it
you can always reinstall
and it's free

Bug#714114: [broadcom-sta-dkms] will not even build for me

[Randy]

I have attached the  make.log

Package: broadcom-sta-dkms
Version: 5.100.82.112-9

--- Please enter the report below this line. ---


--- System information. ---
Architecture: amd64
Kernel:   Linux 3.2.0-4-amd64

Debian Release: jessie/sid
  500 wheezy  winswitch.org 
  500 unstableftp.us.debian.org 
  500 testing ftp.us.debian.org 
  500 testing deb-multimedia.org 
  500 stable  security.debian.org 
  500 stable  http.us.debian.org 
  500 stable  ftp.us.debian.org 
  500 stable  download.webmin.com 
  500 stable  deb.opera.com 
  500 oldstable   http.us.debian.org 
  500 all liveusb.info 
1 experimentalftp.de.debian.org 

--- Package information. ---
Depends(Version) | Installed
-+-=
dkms(= 2.1.0.0) | 2.2.0.3-1.2


Recommends  (Version) | Installed
=-+-===
wireless-tools| 30~pre9-8


Package's Suggests field is empty.
-- 
Randy Batterbee

Take a trip with Torah and find out who you really are.

Open Source  Linux
if it ain't broke tweak it
you can always reinstall
and it's free
DKMS make.log for broadcom-sta-5.100.82.112 for kernel 3.9-1-amd64 (x86_64)
Sun Jun 30 18:17:54 EDT 2013
/bin/sh: 1: [: Illegal number: 
/bin/sh: 1: [: Illegal number: 
Wireless Extension is the only possible API for this kernel version
Using Wireless Extension API
KBUILD_NOPEDANTIC=1 make -C /lib/modules/3.9-1-amd64/build M=/var/lib/dkms/broadcom-sta/5.100.82.112/build
make[1]: Entering directory `/usr/src/linux-headers-3.9-1-amd64'
CFG80211 API is prefered for this kernel version
Using CFG80211 API
Kernel architecture is X86_64
  LD  /var/lib/dkms/broadcom-sta/5.100.82.112/build/built-in.o
  CC [M]  /var/lib/dkms/broadcom-sta/5.100.82.112/build/src/shared/linux_osl.o
  CC [M]  /var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_linux.o
  CC [M]  /var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_iw.o
  CC [M]  /var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.o
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c: In function ‘wl_cfg80211_join_ibss’:
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c:757:26: error: ‘struct cfg80211_ibss_params’ has no member named ‘channel’
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c: At top level:
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c:1664:2: warning: initialization from incompatible pointer type [enabled by default]
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c:1664:2: warning: (near initialization for ‘wl_cfg80211_ops.set_tx_power’) [enabled by default]
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c:1665:2: warning: initialization from incompatible pointer type [enabled by default]
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c:1665:2: warning: (near initialization for ‘wl_cfg80211_ops.get_tx_power’) [enabled by default]
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c: In function ‘wl_update_bss_info’:
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c:2092:11: error: ‘struct cfg80211_bss’ has no member named ‘information_elements’
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c:2093:15: error: ‘struct cfg80211_bss’ has no member named ‘len_information_elements’
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c:2095:3: warning: passing argument 1 of ‘cfg80211_put_bss’ from incompatible pointer type [enabled by default]
In file included from /var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c:27:0:
/usr/src/linux-headers-3.9-1-common/include/net/cfg80211.h:3302:6: note: expected ‘struct wiphy *’ but argument is of type ‘struct cfg80211_bss *’
/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c:2095:3: error: too few arguments to function ‘cfg80211_put_bss’
In file included from /var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.c:27:0:
/usr/src/linux-headers-3.9-1-common/include/net/cfg80211.h:3302:6: note: declared here
make[4]: *** [/var/lib/dkms/broadcom-sta/5.100.82.112/build/src/wl/sys/wl_cfg80211.o] Error 1
make[3]: *** [_module_/var/lib/dkms/broadcom-sta/5.100.82.112/build] Error 2
make[2]: *** [sub-make] Error 2
make[1]: *** [all] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-3.9-1-amd64'
make: *** [all] Error 2

Bug#689216: lxterminal: Problem shortcuts ctrl+shift+c and ctrl+shift+v

[Randy Li]

Yes, I also met it in wheezy.
The link below shows how ubuntu fixed it.
https://bugs.launchpad.net/ubuntu/+source/lxterminal/+bug/971918
--
ayaka


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#706218: iceweasel in kde4 can't use socks5 proxy, but in gnome3 can

[Randy Li]

Package: iceweasel
Version: 10.0.12esr-1
Severity: normal

Dear Maintainer,

   * What led up to the situation?
   I want to use socks5 proxy in iceweael in kde4 environment.
   The socks5 proxy is made by ssh -D.
   After sat iceweasel, I find I can't visit any website and home button
doesn't
   work(clicked but not to query home page)
   I entered ip or url into address box then press enter, it just refresh
tag
   (without change anything) and address box won't change too. And I didn't
see
   it query page.
   But with the same setting, iceweasel works in gnome3.


-- Package-specific info:

-- Extensions information
Name: Adblock Plus
Location: ${PROFILE_EXTENSIONS}/{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}.xpi
Status: enabled

Name: Auto Refresh
Location: ${PROFILE_EXTENSIONS}/autorefr...@plugin.xpi
Status: enabled

Name: Chinese Simplified (zh-CN) Language Pack locale
Location:
/usr/lib/iceweasel/extensions/langpack-zh...@iceweasel.mozilla.org.xpi
Package: iceweasel-l10n-zh-cn
Status: enabled

Name: Default theme
Location:
/usr/lib/iceweasel/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}
Package: iceweasel
Status: user-disabled

Name: DownloadHelper
Location: ${PROFILE_EXTENSIONS}/{b9db16a4-6edc-47ec-a1f4-b86292ed211d}
Status: enabled

Name: DownThemAll!
Location: ${PROFILE_EXTENSIONS}/{DDC359D1-844A-42a7-9AA1-88A850A938A8}.xpi
Status: enabled

Name: HTTPS Finder
Location: ${PROFILE_EXTENSIONS}/{6bdc61ae-7b80-44a3-9476-e1d121ec2238}.xpi
Status: enabled

Name: Mozilla Archive Format
Location: ${PROFILE_EXTENSIONS}/{7f57cf46-4467-4c2d-adfa-0cba7c507e54}.xpi
Status: enabled

Name: NicoFox
Location: ${PROFILE_EXTENSIONS}/nico...@littlebtc.xpi
Status: enabled

Name: RefControl
Location: ${PROFILE_EXTENSIONS}/{455D905A-D37C-4643-A9E2-F6FEFAA0424A}.xpi
Status: enabled

Name: UnMHT
Location: ${PROFILE_EXTENSIONS}/{f759ca51-3a91-4dd1-ae78-9db5eee9ebf0}.xpi
Status: enabled

Name: User Agent Switcher
Location: ${PROFILE_EXTENSIONS}/{e968fc70-8f95-4ab9-9e79-304de2a71ee1}.xpi
Status: enabled

Name: valley of light theme
Status: enabled

-- Plugins information
Name: Shockwave Flash
Location: /usr/lib/flashplugin-nonfree/libflashplayer.so
Status: enabled


-- Addons package information
ii  iceweasel  10.0.12esr-1 amd64Web browser based on Firefox
ii  iceweasel-l10n 1:10.0.12esr all  Chinese (China) language
package

-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=zh_CN.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages iceweasel depends on:
ii  debianutils 4.3.2
ii  fontconfig  2.9.0-7.1
ii  libc6   2.13-38
ii  libgdk-pixbuf2.0-0  2.26.1-1
ii  libglib2.0-02.33.12+really2.32.4-5
ii  libgtk2.0-0 2.24.10-2
ii  libnspr42:4.9.2-1
ii  libnspr4-0d 2:4.9.2-1
ii  libsqlite3-03.7.13-1
ii  libstdc++6  4.7.2-5
ii  procps  1:3.3.3-3
ii  xulrunner-10.0  10.0.12esr-1

iceweasel recommends no packages.

Versions of packages iceweasel suggests:
ii  fonts-stix [otf-stix]  1.1.0-1
ii  libgssapi-krb5-2   1.10.1+dfsg-5
pn  mozplugger none

Versions of packages xulrunner-10.0 depends on:
ii  libasound21.0.25-4
ii  libatk1.0-0   2.4.0-2
ii  libbz2-1.01.0.6-4
ii  libc6 2.13-38
ii  libcairo2 1.12.2-3
ii  libdbus-1-3   1.6.8-1
ii  libdbus-glib-1-2  0.100.2-1
ii  libevent-2.0-52.0.19-stable-3
ii  libfontconfig12.9.0-7.1
ii  libfreetype6  2.4.9-1.1
ii  libgcc1   1:4.7.2-5
ii  libgdk-pixbuf2.0-02.26.1-1
ii  libglib2.0-0  2.33.12+really2.32.4-5
ii  libgtk2.0-0   2.24.10-2
ii  libhunspell-1.3-0 1.3.2-4
ii  libjpeg8  8d-1
ii  libmozjs10d   10.0.12esr-1
ii  libnotify40.7.5-1
ii  libnspr4-0d   2:4.9.2-1
ii  libnss3-1d2:3.14.3-1
ii  libpango1.0-0 1.30.0-1
ii  libpixman-1-0 0.26.0-4
ii  libreadline6  6.2+dfsg-0.1
ii  libsqlite3-0  3.7.13-1
ii  libstartup-notification0  0.12-1
ii  libstdc++64.7.2-5
ii  libvpx1   1.1.0-1
ii  libx11-6  2:1.5.0-1
ii  libxext6  2:1.3.1-2
ii  libxrender1   1:0.9.7-1
ii  libxt61:1.1.3-1
ii  zlib1g1:1.2.7.dfsg-13

Versions of packages xulrunner-10.0 suggests:
ii  libcanberra0  0.28-6
ii  libgnomeui-0  2.24.5-2

-- no debconf information
--
ayaka

-- 
Randy

Bug#683580: now ibus-pinyin developers has noticed that

[Randy Li]

https://code.google.com/p/ibus/issues/detail?id=1195
This issue has been reopened.


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#685907: nvidia-vdpau-driver: it had better include libvdpau.so.304.37, libvdpau can't work

[Randy Li]

于 2012年09月15日 21:53, Andreas Beckmann 写道:

[Please keep the bug in Cc:]

On 2012-09-15 15:21, Randy Li wrote:

it can't play video at all(no video will show).That is it does not work

That's still insufficient information.

What version of mplayer do you use?
(dpkg -l | grep mplayer)
How do you run it?
What does it output (in the console)?
Does it work if you use something else than vdpau?
e.g. mplayer -vo x11 ...

How is your nvidia software setup?
Run (on the system where you have the problems)
   reportbug -N 685907
this will collect useful information and send it to this bug report.

And probably before you do all this, first update to the latest driver
version in unstable.

In your first mail, you were talking about compiling something. What
are you trying to do?
If you are compiling mplayer yourself - please try the mplayer package
in Debian - does this work?


Andreas

The mplayer is from svn
I run it mplayer -vo vdpau -vc ffh264vdpau

Playing [FLsnow][Shinryaku!_Ika_Musume][BDRIP]_[FLsnow][Shinryaku 
_Ika_Musume][10][1080p][AVC_FLAC].mkv.

libavformat version 54.29.105 (internal)
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (flac), -aid 0, -alang jpn
VIDEO:  [H264]  1920x1080  0bpp  23.976 fps0.0 kbps ( 0.0 kbyte/s)
Clip info:
 creation_time: 2011-05-25 00:19:33
Load subtitles in ./
[vdpau] Error when calling vdp_device_create_x11: 1
Error opening/initializing the selected video_out (-vo) device.

mplayer -vo x11

can work well(just take too much cpu)

Bug#685907: nvidia-vdpau-driver: it had better include libvdpau.so.304.37, libvdpau can't work

[Randy Li]

it can't play video at all(no video will show).That is it does not work

I am sorry for my bad english

2012/9/9, Andreas Beckmann deb...@abeckmann.de:
 Control: tag -1 moreinfo

 On 2012-08-26 12:30, ayaka wrote:
I just use the control files in 302.17 to compile the nvidia packages.
When I compile mplayer, I find out the so file in libvdpau1 can't
 work(it can
link, but can't work) only the nvidia version can both work and link.

 Please explain how it does not work.


 Andreas



-- 
Randy


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#683580: [Pkg-ime-devel] Bug#683580: ibus-pinyin: the simialr pinyin,模糊音�

[Randy Li]

于 2012年08月02日 21:22, Osamu Aoki 写道:

Hi,

I was the last uploader of this package but I do not understand Chinese
well.  (Sure I can guess a bit as japanese but that is all I can do.)

On Thu, Aug 02, 2012 at 12:18:55PM +0800, ayaka wrote:

Package: ibus-pinyin
Version: 1.4.0-1+b1
Severity: normal

Dear Maintainer,
*** Please consider answering these questions, where appropriate ***

* What led up to the situation? enable the similar pinyin l-n
开始l-n的模糊音
* What exactly did you do (or not do) that was effective (or
  ineffective)?
you press l when ibus-pinyin is using in chinese 
modes.当开始l-n的模糊音时，在拼音输入时，按下l。
* What was the outcome of this action?
the ibus-pinyin will exit.
ibus-pinyin会退出。
* What outcome did you expect instead?
I don't know how to descibe it in english
用过模糊音的人

  Used fuzzy sound

Please use chinese user mailing to find someone to translate issues and
also submit patch.

Aron, do you understand this?

Osamu
  http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-ime-devel

If you can see the picture
If you enable it, then press l in pinyin mode, the ibus will exsit.
Sadness, our chinese user term is a cold term, I haven't received any 
mail from half of year age


attachment: 2012-08-02 21:58:21的屏幕截图.png

Bug#683580: [Pkg-ime-devel] Bug#683580: Bug#683580: ibus-pinyin: the simialr pinyin

[Randy Li]

于 2012年08月02日 22:45, Osamu Aoki 写道:

Hi,

On Thu, Aug 02, 2012 at 10:26:28PM +0800, Randy Li wrote:

于 2012年08月02日 21:22, Osamu Aoki 写道:

Hi,

I was the last uploader of this package but I do not understand Chinese
well.  (Sure I can guess a bit as japanese but that is all I can do.)

On Thu, Aug 02, 2012 at 12:18:55PM +0800, ayaka wrote:

Package: ibus-pinyin
Version: 1.4.0-1+b1
Severity: normal

Dear Maintainer,
*** Please consider answering these questions, where appropriate ***

* What led up to the situation? enable the similar pinyin l-n
开始l-n的模糊音
* What exactly did you do (or not do) that was effective (or
  ineffective)?
you press l when ibus-pinyin is using in chinese 
modes.当开始l-n的模糊音时，在拼音输入时，按下l。
* What was the outcome of this action?
the ibus-pinyin will exit.
ibus-pinyin会退出。
* What outcome did you expect instead?
I don't know how to descibe it in english
用过模糊音的人

  Used fuzzy sound

Please use chinese user mailing to find someone to translate issues and
also submit patch.

Aron, do you understand this?

Osamu
  http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-ime-devel

If you can see the picture
If you enable it, then press l in pinyin mode, the ibus will exsit.
Sadness, our chinese user term is a cold term, I haven't received
any mail from half of year age

I saw PNG file and enabled l=n (This was default.  I just clicked
Enable fuzzy syllable.  I typed l and chose 来 by typing 1.  It
works fine here.

This is default install.  Chinese language/Half
width/Full-punctuation/Chinese Simplified/...

Unreproduceble so far




___
Pkg-ime-devel mailing list
pkg-ime-de...@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-ime-devel

Maybe the session manager's problem or windows manager's problem?
Here is the gnome-session and compiz(from sid)
But it also have problem in squeeze
Sadness, I can't compile a debug version from ibus's git , and I don't 
know gdb well
Maybe I can get some help from #ubuntu-cn@freenode, but chinese perfer 
fctix.
I find out that if I only enable l-n, it works fine, but if you enable 
more(I don't know how much, just enable all), it will have problem.



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#677176: gimp: Path from Text limited to 15 characters

[Randy G]

Package: gimp
Version: 2.8.0-2+b1
Severity: normal

Dear Maintainer,

Creating header images for websites. Trying to outline text for effect. Only 15 
charcters would stroke selection.

Tried two separate Gimp installs on two different boxes. Same result. Tried an 
older machine with Gimp 2.6, no issues.

Created header title one word at a time.

-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=POSIX, LC_CTYPE=POSIX (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash

Versions of packages gimp depends on:
ii  gimp-data   2.8.0-2
ii  libaa1  1.4p5-39
ii  libatk1.0-0 2.4.0-2
ii  libbabl-0.1-0   0.1.10-1
ii  libbz2-1.0  1.0.6-1
ii  libc6   2.13-33
ii  libcairo2   1.12.2-1
ii  libdbus-1-3 1.5.12-1
ii  libdbus-glib-1-20.98-1
ii  libexif12   0.6.20-2
ii  libfontconfig1  2.9.0-6
ii  libfreetype62.4.9-1
ii  libgdk-pixbuf2.0-0  2.26.1-1
ii  libgegl-0.2-0   0.2.0-2
ii  libgimp2.0  2.8.0-2+b1
ii  libglib2.0-02.32.3-1
ii  libgs9  9.05~dfsg-6
ii  libgtk2.0-0 2.24.10-1
ii  libgudev-1.0-0  175-3.1
ii  libjasper1  1.900.1-13
ii  libjpeg88d-1
ii  liblcms11.19.dfsg-1.1
ii  libmng1 1.0.10-3
ii  libpango1.0-0   1.30.0-1
ii  libpng12-0  1.2.49-1
ii  libpoppler-glib80.18.4-2
ii  librsvg2-2  2.36.1-1
ii  libtiff43.9.6-5
ii  libwebkitgtk-1.0-0  1.8.1-2
ii  libwmf0.2-7 0.2.8.4-10
ii  libx11-62:1.4.99.901-2
ii  libxcursor1 1:1.1.13-1
ii  libxext62:1.3.1-2
ii  libxfixes3  1:5.0-4
ii  libxmu6 2:1.1.1-1
ii  libxpm4 1:3.5.10-1
ii  python  2.7.2-10
ii  python-gtk2 2.24.0-3
ii  python2.7   2.7.3~rc2-2.1
ii  zlib1g  1:1.2.7.dfsg-11

Versions of packages gimp recommends:
ii  ghostscript  9.05~dfsg-6

Versions of packages gimp suggests:
ii  gimp-data-extras  1:2.0.1-3
ii  gimp-help-en [gimp-help]  2.6.1-1
ii  gvfs-backends 1.12.3-1
ii  libasound21.0.25-3

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#656662: ruby1.9.1: Missing emacs inf-ruby.el and others

[Randy Coulman]

Package: ruby1.9.1
Version: 1.9.3.0-2
Severity: wishlist

Dear Maintainer,

I see that the ruby1.9.1-elisp package has been removed because 
ruby-mode.el has been incorporated into emacs23.  However, this doesn't 
account for the other *.el files in the ruby1.9.1 source tree, such as 
inf-ruby.el, ruby-electric.el, and others.

Please consider restoring the ruby1.9.1-elisp package, but removing 
ruby-mode.el to avoid conflicts with emacs23.

-- System Information:
Architecture: i386 (i686)

Kernel: Linux 3.0.0-1-686-pae (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash

Versions of packages ruby1.9.1 depends on:
ii  libc6 2.13-24
ii  libruby1.9.1  1.9.3.0-2

ruby1.9.1 recommends no packages.

Versions of packages ruby1.9.1 suggests:
ii  graphviznone
ii  ri1.9.1 1.9.3.0-2
ii  ruby1.9.1-dev   1.9.3.0-2
ii  ruby1.9.1-examples  1.9.3.0-2

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#647268: RuntimeError: Failed to load the Progress Indicator plugin [...]

[Randy]

Package: calibre
Version: 0.8.21+dfsg-1
Followup-For: Bug #647268

Dear Maintainer,

Same problem here as original post.




-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.1-0.slh.3-aptosid-amd64 (SMP w/1 CPU core; PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages calibre depends on:
ii  calibre-bin0.8.21+dfsg-1
ii  fonts-liberation [ttf-liberation]  1.07.0-2
ii  imagemagick8:6.6.9.7-5+b1
ii  poppler-utils  0.16.7-2+b1
ii  python-beautifulsoup   3.2.0-2
ii  python-cherrypy3   3.1.2-1
ii  python-cssutils0.9.8~a1-1
ii  python-dateutil1.5-1
ii  python-dbus0.84.0-2
ii  python-django-tagging  0.3.1-2
ii  python-encutils0.9.8~a1-1
ii  python-imaging 1.1.7-4
ii  python-lxml2.3-0.1+b2
ii  python-mechanize   0.2.5-1
ii  python-pkg-resources   0.6.24-1
ii  python-pyparsing   1.5.2-2
ii  python-qt4 4.8.6-2
ii  python-routes  1.12.3-1
ii  python2.7  2.7.2-7
ii  ttf-liberation 1.07.0-2
ii  xdg-utils  1.1.0~rc1-2

Versions of packages calibre recommends:
pn  python-dnspython  none

calibre suggests no packages.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#646553: policykit-1-gnome: Not able to authenticate and mount luks volume with new version.

[Randy]

Package: policykit-1-gnome
Version: 0.104-1
Severity: normal

Dear Maintainer,

With version .104-1, I'm no longer able to mount my luks volume. When trying to
mount the volume a window opens asking me to enter my password to unlock the
volume. After entering the luks password, another window opens saying
Authentication is required to mount the device and asks for the root
password. After entering the root password another window opens, once more
saying Authentication is required to mount the device. With this window there
isn't any location to enter the root password, only a cancel button and
authenticate button. Clicking on either of these buttons does nothing. I am not
able to close the window, I must use the kill command to close it.

After downgrading to .102-2 the problem is resolved.




-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.1-0.slh.1-aptosid-amd64 (SMP w/1 CPU core; PREEMPT)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages policykit-1-gnome depends on:
ii  libc6  2.13-21 
ii  libgdk-pixbuf2.0-0 2.24.0-1
ii  libglib2.0-0   2.28.8-1
ii  libgtk-3-0 3.0.12-2
ii  libpolkit-agent-1-00.102-1 
ii  libpolkit-gobject-1-0  0.102-1 
ii  policykit-10.102-1 

policykit-1-gnome recommends no packages.

policykit-1-gnome suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#611153: KMail not setting unread messages properly

[Randy Edwards]

Package: kmail
Version: 4:4.4.7-3

Running testing's Courier-IMAP 4.8.0-3 on the server, I access my e-mail 
just fine.

However, when I selected and then moved 100 or so messages from a folder and 
dragged/dropped them into the trash folder, KMail did so just fine. But on 
the next mail check KMail reports the full count of 100+ messages as 
unread in the original folder. Going into the original folder resets the 
unread message count, and the messages were indeed moved to the trash.

This is a persistent problem. Closing KMail and reopening it still shows the 
100+ messages as unread. Unsubscribing and resubscribing to the IMAP folder 
does not cure the problem either.

I've tested this problem on other folders and I seem to be able to replicate 
it. I've now got 3 folders that show incorrect numbers of unread messages. 
:-)


-- 




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#561761: file in parent dir

[Randy Dunlap]

On 01/29/10 14:57, jida...@jidanni.org wrote:

diff -U0 /tmp/BUG-HUNTING /tmp/BUG-HUNTING.new
--- /tmp/BUG-HUNTING2009-12-03 11:51:21.0 +0800
+++ /tmp/BUG-HUNTING.new2009-12-20 12:45:37.783783055 +0800
@@ -27 +27 @@
-Before you submit a bug report read REPORTING-BUGS.
+Before you submit a bug report read ../REPORTING-BUGS.
--


Hi,

That may be a correct change, but your patch needs a
Signed-off-by: line and correct file names and directory levels
before it can be applied.  Please resend with corrections.

thanks,
--
~Randy



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#541835: crypto configuration / dependencies broken

[Randy Dunlap]

On Tue, 25 Aug 2009 19:58:52 -0400 Celejar wrote:

 I'm having a pretty bizarre problem with my kernel crypto
 configuration.  I need support for a bog standard LUKS (aes /
 cbc-essiv:sha256) / cryptsetup installation, but even after I enable
 virtually everything in the crypto section of the kernel configs, cbc
 fails to load.  All the relevant modules are exist (dm-mod, dm-crypt,
 crypto_blkcipher, crypto_algapi, crypto_hash, aes_generic,
 sha256_generic), but even after modprobing / insmoding
 everything, /proc/crypto shows that aes and sha is there, but not cbc.
 
 The problem has been reproduced (using my kernel config) by Jonas
 Meurer, the Debian cryptsetup maintainer, so it's not just me ;).
 We've tried numerous different kernel versions in the .30 / .31 range.
 
 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=541835
 
 Does this mean that something else somewhere in the kernel needs to be
 configured but isn't, and the necessary dependency isn't properly
 declared?
 
 My config is at:
 http://bugs.debian.org/cgi-bin/bugreport.cgi?msg=45;filename=config-2.6.31-rc6-lizzie-00042-gb2add73;att=1;bug=541835
 
 [I'm not subscribed to lkml; please cc me on responses]


You could try/test a patch that was just posted:
  http://lkml.org/lkml/2009/8/27/249


---
~Randy
LPC 2009, Sept. 23-25, Portland, Oregon
http://linuxplumbersconf.org/2009/



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#541835: [pkg-cryptsetup-devel] Bug#541835: crypto configuration / dependencies broken

[Randy Dunlap]

On Thu, 27 Aug 2009 20:35:01 +0200 Jonas Meurer wrote:

 hey,
 
 On 27/08/2009 Randy Dunlap wrote:
  On Tue, 25 Aug 2009 19:58:52 -0400 Celejar wrote:
  
   I'm having a pretty bizarre problem with my kernel crypto
   configuration.  I need support for a bog standard LUKS (aes /
   cbc-essiv:sha256) / cryptsetup installation, but even after I enable
   virtually everything in the crypto section of the kernel configs, cbc
   fails to load.  All the relevant modules are exist (dm-mod, dm-crypt,
   crypto_blkcipher, crypto_algapi, crypto_hash, aes_generic,
   sha256_generic), but even after modprobing / insmoding
   everything, /proc/crypto shows that aes and sha is there, but not cbc.
   
   The problem has been reproduced (using my kernel config) by Jonas
   Meurer, the Debian cryptsetup maintainer, so it's not just me ;).
   We've tried numerous different kernel versions in the .30 / .31 range.
   
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=541835
   
   Does this mean that something else somewhere in the kernel needs to be
   configured but isn't, and the necessary dependency isn't properly
   declared?
   
   My config is at:
   http://bugs.debian.org/cgi-bin/bugreport.cgi?msg=45;filename=config-2.6.31-rc6-lizzie-00042-gb2add73;att=1;bug=541835
   
   [I'm not subscribed to lkml; please cc me on responses]
  
  
  You could try/test a patch that was just posted:
http://lkml.org/lkml/2009/8/27/249
 
 that patch seems to be for ecryptfs only, while Celejar uses dm-crypt.
 second, the patch just ensures that CRYPTO_ECB and CRYPTO_CBC are
 selected along with ECRYPT_FS. but Celejar does have both CRYPTO_ECB and
 CRYPTO_CBC selected.

ack.

 the problem rather is that loading the cbc blockcipher module simply
 does nothing. the module is listed in /proc/modules, but the blockcipher
 is still missing from /proc/crypto.
 
 the problem is not reproducible with a debian/unstable 2.6.30.6 kernel,
 even though it has cbc compiled as module as well. but if I recompile
 the same kernel sources with Celejars kernel .config, the problem
 occurs. thus it must be related to the kernel config in some way.

add cc: linux-cry...@vger.kernel.org -- maybe someone there can help out.


---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#534576: ktorrent: Sends size of seeded torrent as downloaded

[Randy]

Package: ktorrent
Version: 3.1.4+dfsg.1-1
Severity: important


When starting to seed a torrent, that is a torrent you have already downloaded 
or you created, ktorrent verifies the existing data, then reports to the 
tracker that it has downloaded that amount, even 
though you have not downloaded even a single byte.  On trackers that maintain 
records of uploaded and downloaded bytes (roughly 100% of them), this is 
absolutely, positively unacceptable!  Ktorrent needs 
to only report actual bytes downloaded from peers, and not claim already 
existing data was downloaded.  I would have reported this as a critical bug 
were it not for many people only using open trackers, 
as this makes ktorrent unusable for seeding - anyone who attempts to use 
ktorrent on a private tracker will, like me, find they need to contact every 
tracker they're registered with and ask the admin to
manually fix their statistics due to the broken report ktorrent sends.


-- System Information:
Debian Release: 5.0.1
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages ktorrent depends on:
ii  kdebase-runtime   4:4.1.0-2  runtime components from the offici
ii  kdelibs5  4:4.1.0-3  core libraries for all KDE 4 appli
ii  libc6 2.7-18 GNU C Library: Shared libraries
ii  libgcc1   1:4.3.2-1.1GCC support library
ii  libgeoip1 1.4.4.dfsg-3   A non-DNS IP-to-country resolver l
ii  libgmp3c2 2:4.2.2+dfsg-3 Multiprecision arithmetic library
ii  libphonon44:4.2.0-2  Phonon multimedia framework for Qt
ii  libqca2   2.0.0-4libraries for the Qt Cryptographic
ii  libqt4-dbus   4.4.3-1Qt 4 D-Bus module
ii  libqt4-network4.4.3-1Qt 4 network module
ii  libqt4-qt3support 4.4.3-1Qt 3 compatibility library for Qt 
ii  libqt4-xml4.4.3-1Qt 4 XML module
ii  libqtcore44.4.3-1Qt 4 core module
ii  libqtgui4 4.4.3-1Qt 4 GUI module
ii  libstdc++64.3.2-1.1  The GNU Standard C++ Library v3
ii  phonon4:4.2.0-2  metapackage for Phonon multimedia 

ktorrent recommends no packages.

Versions of packages ktorrent suggests:
pn  php5-cli  none (no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#526365: udev: Kernel 2.6.26-2-686 won't boot

[Randy G]

Package: udev
Version: 0.141-1
Severity: critical
Justification: breaks the whole system


Kernel 2.6.26-2-686 fails to boot. Last message displayed:
udevd[400]: GOTO 'libsane_rules_end' has no matching label in: 
'/etc/udev/rules.d/z60_iscan.rules'

Kernel 2.6.26-1-686 displays same message but continues to boot.

Removed/purged the iscan packages. The referenced file name z60_iscan.rules 
no longer exists on the system.

udev is trying to use, reference a nonexistent file.


-- Package-specific info:
-- /etc/udev/rules.d/:
/etc/udev/rules.d/:
total 108
lrwxrwxrwx 1 root root19 May 24  2007 025_libgphoto2.rules - 
../libgphoto2.rules
-rw-r--r-- 1 root root  2777 Dec 10 09:49 70-persistent-cd.rules
-rw-r--r-- 1 root root   515 Apr 24 11:32 70-persistent-net.rules
lrwxrwxrwx 1 root root16 Jul 10  2008 libmtp7.rules - ../libmtp7.rules
lrwxrwxrwx 1 root root16 Apr 29 10:05 libmtp8.rules - ../libmtp8.rules
lrwxrwxrwx 1 root root19 May 24  2007 z60_alsa-utils.rules - 
../alsa-utils.rules
-rw-r--r-- 1 root root  5354 Mar 17 02:27 z60_hplip.rules
-rw-r--r-- 1 root root  2656 Jan  3  2008 z60_libpisock9.rules
-rw-r--r-- 1 root root  1742 Feb 20 13:32 z60_libsane-extras.rules
-rw-r--r-- 1 root root 72908 Mar  4 07:26 z60_libsane.rules
-rw-r--r-- 1 root root  6658 Oct 31 05:54 z60_xserver-xorg-input-wacom.rules

-- /sys/:
/sys/block/loop0/dev
/sys/block/loop1/dev
/sys/block/loop2/dev
/sys/block/loop3/dev
/sys/block/loop4/dev
/sys/block/loop5/dev
/sys/block/loop6/dev
/sys/block/loop7/dev
/sys/block/ram0/dev
/sys/block/ram1/dev
/sys/block/ram10/dev
/sys/block/ram11/dev
/sys/block/ram12/dev
/sys/block/ram13/dev
/sys/block/ram14/dev
/sys/block/ram15/dev
/sys/block/ram2/dev
/sys/block/ram3/dev
/sys/block/ram4/dev
/sys/block/ram5/dev
/sys/block/ram6/dev
/sys/block/ram7/dev
/sys/block/ram8/dev
/sys/block/ram9/dev
/sys/block/sda/dev
/sys/block/sda/sda1/dev
/sys/block/sda/sda2/dev
/sys/block/sda/sda3/dev
/sys/block/sda/sda4/dev
/sys/block/sdb/dev
/sys/block/sdb/sdb1/dev
/sys/block/sdc/dev
/sys/block/sdc/sdc1/dev
/sys/block/sdd/dev
/sys/block/sde/dev
/sys/block/sdf/dev
/sys/block/sdg/dev
/sys/block/sr0/dev
/sys/class/bsg/0:0:0:0/dev
/sys/class/bsg/1:0:0:0/dev
/sys/class/bsg/2:0:0:0/dev
/sys/class/bsg/2:0:0:1/dev
/sys/class/bsg/2:0:0:2/dev
/sys/class/bsg/2:0:0:3/dev
/sys/class/bsg/3:0:0:0/dev
/sys/class/bsg/4:0:0:0/dev
/sys/class/hidraw/hidraw0/dev
/sys/class/hidraw/hidraw1/dev
/sys/class/input/input0/event0/dev
/sys/class/input/input1/event1/dev
/sys/class/input/input1/mouse0/dev
/sys/class/input/input2/event2/dev
/sys/class/input/input3/event3/dev
/sys/class/input/input4/event4/dev
/sys/class/input/mice/dev
/sys/class/misc/cpu_dma_latency/dev
/sys/class/misc/device-mapper/dev
/sys/class/misc/fuse/dev
/sys/class/misc/hpet/dev
/sys/class/misc/network_latency/dev
/sys/class/misc/network_throughput/dev
/sys/class/misc/psaux/dev
/sys/class/misc/snapshot/dev
/sys/class/ppdev/parport0/dev
/sys/class/printer/lp0/dev
/sys/class/rtc/rtc0/dev
/sys/class/scsi_generic/sg0/dev
/sys/class/scsi_generic/sg1/dev
/sys/class/scsi_generic/sg2/dev
/sys/class/scsi_generic/sg3/dev
/sys/class/scsi_generic/sg4/dev
/sys/class/scsi_generic/sg5/dev
/sys/class/scsi_generic/sg6/dev
/sys/class/scsi_generic/sg7/dev
/sys/class/sound/adsp/dev
/sys/class/sound/audio/dev
/sys/class/sound/controlC0/dev
/sys/class/sound/dsp/dev
/sys/class/sound/mixer/dev
/sys/class/sound/pcmC0D0c/dev
/sys/class/sound/pcmC0D0p/dev
/sys/class/sound/pcmC0D1c/dev
/sys/class/sound/pcmC0D1p/dev
/sys/class/sound/seq/dev
/sys/class/sound/sequencer/dev
/sys/class/sound/sequencer2/dev
/sys/class/sound/timer/dev
/sys/class/usb/hiddev0/dev
/sys/class/usb_device/usbdev1.1/dev
/sys/class/usb_device/usbdev2.1/dev
/sys/class/usb_device/usbdev2.3/dev
/sys/class/usb_device/usbdev2.4/dev
/sys/class/usb_device/usbdev3.1/dev
/sys/class/usb_device/usbdev4.1/dev
/sys/class/usb_device/usbdev5.1/dev
/sys/class/usb_device/usbdev5.2/dev
/sys/class/usb_device/usbdev6.1/dev
/sys/class/usb_device/usbdev7.1/dev
/sys/class/usb_endpoint/usbdev1.1_ep00/dev
/sys/class/usb_endpoint/usbdev1.1_ep81/dev
/sys/class/usb_endpoint/usbdev2.1_ep00/dev
/sys/class/usb_endpoint/usbdev2.1_ep81/dev
/sys/class/usb_endpoint/usbdev2.3_ep00/dev
/sys/class/usb_endpoint/usbdev2.3_ep81/dev
/sys/class/usb_endpoint/usbdev2.4_ep00/dev
/sys/class/usb_endpoint/usbdev2.4_ep01/dev
/sys/class/usb_endpoint/usbdev2.4_ep82/dev
/sys/class/usb_endpoint/usbdev3.1_ep00/dev
/sys/class/usb_endpoint/usbdev3.1_ep81/dev
/sys/class/usb_endpoint/usbdev4.1_ep00/dev
/sys/class/usb_endpoint/usbdev4.1_ep81/dev
/sys/class/usb_endpoint/usbdev5.1_ep00/dev
/sys/class/usb_endpoint/usbdev5.1_ep81/dev
/sys/class/usb_endpoint/usbdev5.2_ep00/dev
/sys/class/usb_endpoint/usbdev5.2_ep81/dev
/sys/class/usb_endpoint/usbdev5.2_ep82/dev
/sys/class/usb_endpoint/usbdev6.1_ep00/dev
/sys/class/usb_endpoint/usbdev6.1_ep81/dev
/sys/class/usb_endpoint/usbdev7.1_ep00/dev
/sys/class/usb_endpoint/usbdev7.1_ep81/dev
/sys/devices/pci:00/:00:1a.0/usb3/dev

Bug#330403: [PATCH] sysrq: more explicit, less terse help messages

[Randy Dunlap]

From: Randy Dunlap randy.dun...@oracle.com

Eliminate sysrq terse help mode; make sysrq help messages more
meaningful (more explicit/verbose).
Make the sysrq action letter clearer by listing it explicitly
in more sysrq help messages (when it is not simple/clear).

The SysRq help message now looks like this:

SysRq : HELP : loglevel(0-9) reBoot terminate-all-tasks(E) 
memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) 
show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) 
show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) 

Addresses http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=330403.

Signed-off-by: Randy Dunlap randy.dun...@oracle.com
cc: jida...@jidanni.org
cc: 330...@bugs.debian.org
---
 drivers/char/sysrq.c |   20 ++--
 1 file changed, 10 insertions(+), 10 deletions(-)

--- lnx-2628.orig/drivers/char/sysrq.c
+++ lnx-2628/drivers/char/sysrq.c
@@ -82,7 +82,7 @@ static void sysrq_handle_loglevel(int ke
 }
 static struct sysrq_key_op sysrq_loglevel_op = {
.handler= sysrq_handle_loglevel,
-   .help_msg   = loglevel0-8,
+   .help_msg   = loglevel(0-9),
.action_msg = Changing Loglevel,
.enable_mask= SYSRQ_ENABLE_LOG,
 };
@@ -233,7 +233,7 @@ static void sysrq_handle_showallcpus(int
 
 static struct sysrq_key_op sysrq_showallcpus_op = {
.handler= sysrq_handle_showallcpus,
-   .help_msg   = aLlcpus,
+   .help_msg   = show-backtrace-all-active-cpus(L),
.action_msg = Show backtrace of all active CPUs,
.enable_mask= SYSRQ_ENABLE_DUMP,
 };
@@ -247,7 +247,7 @@ static void sysrq_handle_showregs(int ke
 }
 static struct sysrq_key_op sysrq_showregs_op = {
.handler= sysrq_handle_showregs,
-   .help_msg   = showPc,
+   .help_msg   = show-registers(P),
.action_msg = Show Regs,
.enable_mask= SYSRQ_ENABLE_DUMP,
 };
@@ -258,7 +258,7 @@ static void sysrq_handle_showstate(int k
 }
 static struct sysrq_key_op sysrq_showstate_op = {
.handler= sysrq_handle_showstate,
-   .help_msg   = showTasks,
+   .help_msg   = show-task-states(T),
.action_msg = Show State,
.enable_mask= SYSRQ_ENABLE_DUMP,
 };
@@ -269,7 +269,7 @@ static void sysrq_handle_showstate_block
 }
 static struct sysrq_key_op sysrq_showstate_blocked_op = {
.handler= sysrq_handle_showstate_blocked,
-   .help_msg   = shoW-blocked-tasks,
+   .help_msg   = show-blocked-tasks(W),
.action_msg = Show Blocked State,
.enable_mask= SYSRQ_ENABLE_DUMP,
 };
@@ -281,7 +281,7 @@ static void sysrq_handle_showmem(int key
 }
 static struct sysrq_key_op sysrq_showmem_op = {
.handler= sysrq_handle_showmem,
-   .help_msg   = showMem,
+   .help_msg   = show-memory-usage(M),
.action_msg = Show Memory,
.enable_mask= SYSRQ_ENABLE_DUMP,
 };
@@ -307,7 +307,7 @@ static void sysrq_handle_term(int key, s
 }
 static struct sysrq_key_op sysrq_term_op = {
.handler= sysrq_handle_term,
-   .help_msg   = tErm,
+   .help_msg   = terminate-all-tasks(E),
.action_msg = Terminate All Tasks,
.enable_mask= SYSRQ_ENABLE_SIGNAL,
 };
@@ -325,7 +325,7 @@ static void sysrq_handle_moom(int key, s
 }
 static struct sysrq_key_op sysrq_moom_op = {
.handler= sysrq_handle_moom,
-   .help_msg   = Full,
+   .help_msg   = memory-full-oom-kill(F),
.action_msg = Manual OOM execution,
.enable_mask= SYSRQ_ENABLE_SIGNAL,
 };
@@ -337,7 +337,7 @@ static void sysrq_handle_kill(int key, s
 }
 static struct sysrq_key_op sysrq_kill_op = {
.handler= sysrq_handle_kill,
-   .help_msg   = kIll,
+   .help_msg   = kill-all-tasks(I),
.action_msg = Kill All Tasks,
.enable_mask= SYSRQ_ENABLE_SIGNAL,
 };
@@ -348,7 +348,7 @@ static void sysrq_handle_unrt(int key, s
 }
 static struct sysrq_key_op sysrq_unrt_op = {
.handler= sysrq_handle_unrt,
-   .help_msg   = Nice,
+   .help_msg   = nice-all-RT-tasks(N),
.action_msg = Nice All RT Tasks,
.enable_mask= SYSRQ_ENABLE_RTNICE,
 };



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#330403: sysrq: no time for terseness

[Randy Dunlap]

jida...@jidanni.org wrote:
 MM == Moritz Muehlenhoff j...@inutil.org writes:
 
 MM On Fri, Dec 19, 2008 at 09:44:17AM +0800, jida...@jidanni.org wrote:
 MM This bug still applies to the current sysrq documentation. Please send
 MM your improved documentation suggestions to the Kernel documentation
 MM maintainers at linux-...@vger.kernel.org.
 They will surely want a patch, a git patch, and all that will take me
 several years to learn, as I have just started...
 
 MM For documentation I'm pretty sure that a regular text would suffice.
 
 MM Cheers,
 MM Moritz
 
 Looking at this (
 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=330403 ) bug again,
 it seems I'm in little position to make a patch, as I am pointing out
 things I don't know, so CC'ing linux-doc.

Thanks for the message.  and a git patch surely isn't necessary.
Just a patch would be fine.

I'll look into this.

-- 
~Randy



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#505065: kernel

[Randy Riegler]

I have:

Linux debian-stable.local 2.6.24-etchnhalf.1-alpha-generic #1 Tue Oct 14
08:54:49 UTC 2008 alpha GNU/Linux

now squid just dies with no log entries

Randy

Bug#505065: squid will not start

[Randy Riegler]

Subject: squid will not start
Package: squid
Version: 2.6.5-6etch4
Severity: grave
Justification: renders package unusable

*** Please type your report below this line ***
This is a DEC Alpha machine.
the following line appears in /var/log/messages:
comm_select_init: epoll_create(): (78) Function not implemented
This is the only indication of a problem there is.

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: alpha
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-6-alpha-generic
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages squid depends on:
ii  adduser3.102 Add and remove users and groups
ii  coreutils  5.97-5.3  The GNU core utilities
ii  debconf [debconf-2.0]  1.5.11etch2   Debian configuration management
sy
ii  libc6.12.3.6.ds1-13etch7 GNU C Library: Shared libraries
ii  libdb4.4   4.4.20-8  Berkeley v4.4 Database
Libraries [
ii  libldap2   2.1.30-13.3   OpenLDAP libraries
ii  libpam0g   0.79-5Pluggable Authentication
Modules l
ii  logrotate  3.7.1-3   Log rotation utility
ii  lsb-base   3.1-23.2etch1 Linux Standard Base 3.1 init
scrip
ii  netbase4.29  Basic TCP/IP networking system
ii  squid-common   2.6.5-6etch4  Internet Object Cache (WWW
proxy c

squid recommends no packages.

-- debconf information:
  squid/fix_cachedir_perms: false
  squid/largefiles_warning:
  squid/anonymize_headers:
  squid/authenticate_program:
  squid-cgi/cachemgr:
  squid/fix_lines: true
  squid/old_version: false
  squid/http_anonymizer:

Bug#460164: #460164 smbfs: Recursive directory listing with CIFS

[Randy Coulman]

On Wed, Aug 20, 2008 at 2:30 PM, Steve Langasek [EMAIL PROTECTED] wrote:

 On Wed, Aug 20, 2008 at 01:51:53PM -0700, Randy Coulman wrote:
  Sorry for the delayed response.  I just ran a test with samba 3.2.0 and
  kernel 2.6.25, and the problem is _NOT_ fixed in that combination.  I am
  unable to test with kernel 2.6.26 yet, unfortunately.

 DFS support does require configuration of /etc/request-key.conf for the
 upcalls, AIUI.  Have you configured this, and if so, how?

 According to the comments at the top of source/client/cifs.spnego.c, the
 correct line is:

  create cifs.resolver * * /sbin/cifs.spnego [-v] %k

 Have you done this?

 Anyway, it looks like 2.6.26-1 is the first Debian kernel version that
 enables the DFS upcall support.


I can now confirm that the 2.6.26 kernel, along with Samba 3.2.1 does indeed
fix DFS support in my company's configuration.  I did not have to make any
changes to /etc/request-key.conf to make it work.

Thanks,
Randy
-- 
Randy Coulman
[EMAIL PROTECTED]

Bug#460164: #460164 smbfs: Recursive directory listing with CIFS

[Randy Coulman]

Sorry for the delayed response.  I just ran a test with samba 3.2.0 and
kernel 2.6.25, and the problem is _NOT_ fixed in that combination.  I am
unable to test with kernel 2.6.26 yet, unfortunately.

Randy

On Mon, Aug 11, 2008 at 4:55 PM, Noèl Köthe [EMAIL PROTECTED] wrote:

 tags 460164 + moreinfo
 thanks

 Hello Randy and Chuck,

 samba 3.2.0 and kernel 2.6.25 (cifs v1.52) are now in lenny and sid
 (kernel 2.6.26 with cifs v1.53).

 Can you confirm that with these kernels/cifs versions your problem is
 fixed?

 Thank you.

 --
 Noèl Köthe noel debian.org
 Debian GNU/Linux, www.debian.org




-- 
Randy Coulman
[EMAIL PROTECTED]

Bug#460164: #460164 smbfs: Recursive directory listing with CIFS

[Randy Coulman]

On Wed, Aug 20, 2008 at 2:30 PM, Steve Langasek [EMAIL PROTECTED] wrote:


 DFS support does require configuration of /etc/request-key.conf for the
 upcalls, AIUI.  Have you configured this, and if so, how?


I wasn't aware of this, so no, I haven't done this.  Would failure to do so
continue to result in recursive directory listings, or would I get an error
message here?



 According to the comments at the top of source/client/cifs.spnego.c, the
 correct line is:

  create cifs.resolver * * /sbin/cifs.spnego [-v] %k


 Have you done this?

 Anyway, it looks like 2.6.26-1 is the first Debian kernel version that
 enables the DFS upcall support.


OK, I'll have to wait until that version hits testing before I can try it.
I'll keep this e-mail handy until then so that I remember to do this
configuration.

Thanks,
Randy
-- 
Randy Coulman
[EMAIL PROTECTED]

Bug#479854: Old packages

[Randy Conn]

Would it be possible to post it here?  I don't know how many of us there 
are, but I subscribed to 479854 specifically to be notified of a 
solution to adding enigmail to iceape-i386.


Thanks,

Randy

Alexander Sack wrote:

On Wed, Jul 16, 2008 at 08:06:19AM -0400, Claudio F Filho wrote:
  
Before, the package 0.94 works fine, but Alexander Sack removed from him  
page[1] this package.

[1]http://people.debian.org/~asac/unstable/

Today, we are without a way to install enigmail in iceape x86_64. In  
i386, is possible to use the xpi in enigmail page.





Hard to resurrect as it is atm. If you want to help on getting
enigmail back for seamonkey/iceape, please ping me in
#ubuntu-mozillateam on freenode.

 - Alexander




  




--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#185117: Watch her climax over and over again

[Randy Zamora]

Have a colossal rod in your pants within weeks.

http://www.secopls.com/
She unwrapped herself to me



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#330186: special depth that true

[felizio randy]

BodypartSignificantMaryanne http://www.Twalveen.com




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#295205: agent ambrosial accreditation

[Randy Lanier]

Snatch up Precsriptions and Mediactions while you still can!

http://abysmalaraby.aid%2Ekusanra.com



not agentambrosial




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#460115: Simple chgrp typo in kolab_bootstrap

[Randy Edwards]

Package: kolabd
Version: 1.9.4-20060707.dfsg-2

Running the kolab_bootstrap script errors with a change group error.  It seems 
that the kolab group is sometimes spelled as kolab-r.  Changing kolab-r 
to kolab or adding a kolab-r group with a group member of kolab allows the 
script to run without error.


-- 
Do you like browsing the web, independent of whatever type of computer you are 
talking to on the other end? Enhancements to public standard protocols is 
the way the WWW will be turned into a proprietary nightmare.



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#460164: smbfs: Recursive directory listing with CIFS

[Randy Coulman]

Package: smbfs
Version: 3.0.28-1
Severity: important

With the upgrade to 3.0.28-1, I am now unable to use any Windows shares
mounted from a Windows 2003 Server using DFS.  This is because CIFS does
not yet fully support DFS and the SMBFS-related scripts that I was using
have
been replaced with forwarders to CIFS.

When I mount a Windows share from such a server, I am able to see the
top-level directories in this share, but if I 'ls' any of these
directories, I get another list of the top-level directories.

Please consider keeping SMBFS support available until CIFS is able to
replace all reasonable uses of SMBFS.  As things stand today, I am
completely unable to access any Windows shares on my company's network.

-- System Information:
Debian Release: lenny/sid
  APT prefers sterling
  APT policy: (500, 'sterling'), (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.22-3-686 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages smbfs depends on:
ii  libc6 2.7-5  GNU C Library: Shared libraries
ii  netbase   4.30   Basic TCP/IP networking system
ii  samba-common  3.0.28-1   Samba common files used by both
th

smbfs recommends no packages.

-- no debconf information


-- 
Randy Coulman
[EMAIL PROTECTED]

Bug#460164: smbfs: Recursive directory listing with CIFS

[Randy Coulman]

On Jan 10, 2008 6:26 PM, Steve Langasek [EMAIL PROTECTED] wrote:

 Hi Randy,

 On Thu, Jan 10, 2008 at 04:58:21PM -0800, Randy Coulman wrote:
  Package: smbfs
  Version: 3.0.28-1
  Severity: important


 According to
 http://archives.free.net.ph/message/20080110.202840.d90c205e.en.html,
 DFS
 support for Linux CIFS is already on the roadmap for inclusion in 2.6.25,
 which will be out well before the lenny release.  I realize this doesn't
 help you with your immediate need for smbfs support, but I do think that
 dropping smbfs in favor of cifs is the right course of action for lenny.


I understand this, and I totally agree.  I just think the timing of the
change was off.  There should be plenty of time to completely drop smbfs
after DFS support is in and working.  Leaving smbfs in place but deprecated
until cifs is able to do the whole job that smbfs did would be preferable,
IMO.

Given that I haven't seen a lot of traffic on this issue in my web searches
suggests I'm in a smaller minority than I thought, though.  I would have
expected DFS-based servers to be a lot more common than they seem to be.

Thanks for the reply,
Randy
-- 
Randy Coulman
[EMAIL PROTECTED]

Bug#257747: Buy OEM Software

[Randy Lee]

Use addr: babloemka. com (remove space)
in your browser

 Microsoft Windows Vista Ultimate   $79
 Macromedia Flash Professional 8$49
 Adobe Premiere 2.0 $59
 Corel Grafix Suite X3  $59
 Adobe Il1ustrator CS2  $59
 Adobe Photoshop CS2 V9.0   $69
 Adobe Photoshop CS3 Extended   $89
 Macromedia Studio 8$99
 Autodesk Autocad 2007 $129
 Adobe Creative Suite 2$149
 Adobe Creative Suite 3 Premium$269

For Mac:
 Adobe Acrobat Pro 7$69
 Adobe After Effects$49
 Macromedia Flash Pro 8 $49
 Adobe Creative Suite 2 Premium $49
 Ableton Live 5.0.1 $49
 Adobe Photoshop CS $49

Just copy 'babloemka. com' (w/o space and quotes)
in address bar of your browser




She folded her hands together 
Damn right you should have wai
Please dont be angry with me, 




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#192292: Weekly Special

[Randy Dailey]

Have you hoped to have a high dollar watch

Piece of costly Jewerly? 


Or even a nice Ink Pen

We have the problem solved for you!

We have all the expinsive brands 
for a low fraction of the expense.


www.brittwz.com



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#324042: closing

[randy]

As the summiter suggested once etch was released. Sorry I didn't get to
it sooner.
-- 

Randall Donald [EMAIL PROTECTED]
http://www.khensu.org[EMAIL PROTECTED]
Programmer/Debian Developer GnuPG: 6C27DEAB 



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#320938: We see this too

[Randy Coulman]

We see a similar hang in vt-is-UTF8 when doing apt-get dist-upgrades 
(from 1:0.2.3dbs-55 to 1:0.2.3dbs-65).  We do automated upgrades of our 
systems, and we redirect the output of the dist-upgrade to a log file.  
We see a couple of escape sequences in the log file, which suggests to 
me that the character sequence is being written to stdout or stderr.


I have been unable to make a small, simple test case for this, but I am 
willing to work on this to provide additional information if necessary.


Randy

--
Randy Coulman
Senior Software Engineer
Key Technology, Inc.
[EMAIL PROTECTED]

-
DISCLAIMER: This email is bound by the terms and conditions
described at
http://www.key.net/disclaimer.htm


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#285290: apache2 content negotiation issue

[Randy Perkins]

 struck this. It seems that the definitions in 
/etc/apache2/conf.d/apache2-doc correctly set things up so that if you 
access the following urls, it works:


I just want to say that I have a net install of testing, done with a daily 
build cd dated 10/27/06.
I did not have the file /etc/apache2/conf.d/apache2-doc.  I Just did a 
dist-upgrade to apache 2.2.3-3,
and I still didnt have the file.  I had to copy it from a backup of an apache 
2.0 installation.

thanks

Randy



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#171338: Guarantee Your results With G1G4! 7, 2006

[Randy]

Hi ,

Give1Get4 built to last and you get to Guarantee your results!  

Totally Automated, Totally Private and Totally For You.

http://www.Give1Get4.net Guest code 719561

When asked why he takes so many shots on goal compared to most average players 
hockey great Wayne Gretzky said: You miss 100% of the shots you don't take.

This is true for anything in life.  

Change requires action and action requires making the decision to act.  Act on 
this email by getting on our next call. 

Get the facts for yourself about why we unapologetically say This is the 
greatest activity on the planet.

Sunday -Thursday at 8pm  10:30PM Eastern  And Friday's  Saturdays at 1:00PM 
Eastern (calls every day)

Here is the schedule and number: 646-519-5860 PIN 1515#

To Your Success,

RANDY 
865-470-4811
[EMAIL PROTECTED]
http://www.Give1Get4.net Guest code 719561


P.S. Watch the Flash Movie - You will be Glad You Did!







[EMAIL PROTECTED] Nashville TN 37201









To remove this email address from further mailings click on  the link below  
while connected to the internet.
http://www.reliablecontact.com/cgi-bin/maxsponder/maxuseradmin.cgi?function=manualdelete3email=171338*bugs.debian.orgun=randycopeland


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#326681: RFP: gShield

[Randy Edwards]

Package: wnpp
Severity: wishlist

   I'd like to submit a RFP for gShield.  gShield 
http://muse.linuxmafia.org/gshield/ is a PERL-based firewall system that is 
quite powerful.  gShield configuration is done by a simple text *.conf file.  
It should be easy to package and is well-behaved and sanely written.

 Regards,
 .
 Randy

-- 
I don't think anybody anticipated the breach of the levees. -- George Bush
on TV lying to Diane Sawyer about the New Orleans disaster on Wednesday, Aug.
31.  For years FEMA listed a New Orleans flood as one of its top 3 likely
major disasters -- it was even the topic of a 2004 Nat'l Geographic article.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#291058: Matrikon Open Letter: Subscription Verification

[Randy Kondor - VP of Marketing]

To Our Valued Readers and Clients,

The problem of unsolicited email has become more than just an
annoyance to individuals and industry. To combat this issue,
we have integrated a new Email Verification Process so only
those who want to receive and download our software, industry
resources, multimedia tutorials and documents are able to so.

[Email verification link below]
 
Matrikon's resources are designed for engineers, IT personnel, 
maintenance  operations managers, project supervisors, executives
and others working in power, petrochemical, oil  gas, pulp  paper,
mining and other industries.
 
Our new mandate is to allow only those who verify their email 
address access to:

 - Industrial connectivity software
 - Troubleshooting and testing utilities
 - Process control trending and reporting software
 - Demonstration software
 - Multimedia tutorials
 - Whitepapers  datasheets
 
With the primary focus on:
 
 - Alarm management
 - Advanced process control
 - Industrial connectivity
 - Asset management
 - IT security
 - Process monitoring and data analysis
 


Email Verification Process

You are currently subscribed as [EMAIL PROTECTED]

To continue to access Matrikon software, resources, and technical
documents, automatically verify your email address by sending us
an email using the following link:

Link: mailto:[EMAIL PROTECTED] 
(Do not modify the subject line. If you are unable to use this 
link, please send an email to [EMAIL PROTECTED] and type 
'Subscribe' in the subject.)

Please Note: If you do NOT click on this link, you will NOT 
receive any further mailings from Matrikon.


 
This new Email Verification Process illustrates Matrikon's continued
commitment to ensure you only receive information that is important
to you.  Please contact me directly if you have any questions.

Kind regards,
 
Randy Kondor
Vice President of Marketing
Matrikon Inc.
Tel: (780) 448-1010
[EMAIL PROTECTED]

***

This open letter is a one-time request to verify that you wish to
receive access to Matrikon resources.
 
Matrikon, Inc. 10405 Jasper Avenue
Edmonton, Alberta, Canada, T5J 3N4
We protect your privacy:
http://www.matrikon.com/main/privacy.asp



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#251061: Matrikon Open Letter: Subscription Verification

[Randy Kondor - VP of Marketing]

To Our Valued Readers and Clients,

The problem of unsolicited email has become more than just an
annoyance to individuals and industry. To combat this issue,
we have integrated a new Email Verification Process so only
those who want to receive and download our software, industry
resources, multimedia tutorials and documents are able to so.

[Email verification link below]
 
Matrikon's resources are designed for engineers, IT personnel, 
maintenance  operations managers, project supervisors, executives
and others working in power, petrochemical, oil  gas, pulp  paper,
mining and other industries.
 
Our new mandate is to allow only those who verify their email 
address access to:

 - Industrial connectivity software
 - Troubleshooting and testing utilities
 - Process control trending and reporting software
 - Demonstration software
 - Multimedia tutorials
 - Whitepapers  datasheets
 
With the primary focus on:
 
 - Alarm management
 - Advanced process control
 - Industrial connectivity
 - Asset management
 - IT security
 - Process monitoring and data analysis
 


Email Verification Process

You are currently subscribed as [EMAIL PROTECTED]

To continue to access Matrikon software, resources, and technical
documents, automatically verify your email address by sending us
an email using the following link:

Link: mailto:[EMAIL PROTECTED] 
(Do not modify the subject line. If you are unable to use this 
link, please send an email to [EMAIL PROTECTED] and type 
'Subscribe' in the subject.)

Please Note: If you do NOT click on this link, you will NOT 
receive any further mailings from Matrikon.


 
This new Email Verification Process illustrates Matrikon's continued
commitment to ensure you only receive information that is important
to you.  Please contact me directly if you have any questions.

Kind regards,
 
Randy Kondor
Vice President of Marketing
Matrikon Inc.
Tel: (780) 448-1010
[EMAIL PROTECTED]

***

This open letter is a one-time request to verify that you wish to
receive access to Matrikon resources.
 
Matrikon, Inc. 10405 Jasper Avenue
Edmonton, Alberta, Canada, T5J 3N4
We protect your privacy:
http://www.matrikon.com/main/privacy.asp



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#301398: Matrikon Open Letter: Subscription Verification

[Randy Kondor - VP of Marketing]

To Our Valued Readers and Clients,

The problem of unsolicited email has become more than just an
annoyance to individuals and industry. To combat this issue,
we have integrated a new Email Verification Process so only
those who want to receive and download our software, industry
resources, multimedia tutorials and documents are able to so.

[Email verification link below]
 
Matrikon's resources are designed for engineers, IT personnel, 
maintenance  operations managers, project supervisors, executives
and others working in power, petrochemical, oil  gas, pulp  paper,
mining and other industries.
 
Our new mandate is to allow only those who verify their email 
address access to:

 - Industrial connectivity software
 - Troubleshooting and testing utilities
 - Process control trending and reporting software
 - Demonstration software
 - Multimedia tutorials
 - Whitepapers  datasheets
 
With the primary focus on:
 
 - Alarm management
 - Advanced process control
 - Industrial connectivity
 - Asset management
 - IT security
 - Process monitoring and data analysis
 


Email Verification Process

You are currently subscribed as [EMAIL PROTECTED]

To continue to access Matrikon software, resources, and technical
documents, automatically verify your email address by sending us
an email using the following link:

Link: mailto:[EMAIL PROTECTED] 
(Do not modify the subject line. If you are unable to use this 
link, please send an email to [EMAIL PROTECTED] and type 
'Subscribe' in the subject.)

Please Note: If you do NOT click on this link, you will NOT 
receive any further mailings from Matrikon.


 
This new Email Verification Process illustrates Matrikon's continued
commitment to ensure you only receive information that is important
to you.  Please contact me directly if you have any questions.

Kind regards,
 
Randy Kondor
Vice President of Marketing
Matrikon Inc.
Tel: (780) 448-1010
[EMAIL PROTECTED]

***

This open letter is a one-time request to verify that you wish to
receive access to Matrikon resources.
 
Matrikon, Inc. 10405 Jasper Avenue
Edmonton, Alberta, Canada, T5J 3N4
We protect your privacy:
http://www.matrikon.com/main/privacy.asp



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#147164: those college chicks don`t know anything Loretta

[Randy]

These are real amateurs who have webcams on their
computers in their dorm rooms! This is not one of those
porn sites with professional girls who get paid to do this
in front of the camera, these are the average girls next door, 
at college, trying to make money and meet guys!

It wont take you more then 1 minute to just check this out
what are you waiting for?

http://burntbypens.com/co25/










automata you compass me elision you denude me 
syntheses you naples me skin you bingle me 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#248059: Finding devices assumes numerals at the end (Doesn't find LVM2 devices)

[Randy Cole]

Greetings,
  Is anyone working on this?  I am reluctant to use
LVM2 without being able to apply tools to the
partition.
Thank you.



 
Yahoo! Sports 
Rekindle the Rivalries. Sign up for Fantasy Football 
http://football.fantasysports.yahoo.com


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#304540: python2.4-moinmoin: README.Debian is missing

[Randy Gobbel]

Package: python2.4-moinmoin
Version: 1.3.4-3
Severity: important

README.Debian is not there at all in /usr/share/doc/python2.4-moinmoin.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.9rg6
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages python2.4-moinmoin depends on:
ii  moinmoin-common   1.3.4-3Python clone of WikiWiki - common 
ii  python2.4 2.4.1-1An interactive high-level object-o

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]