Bug#766918: python-electrum: No need to depend on python-qt4

[Shane Wegner]

Package: python-electrum
Version: 1.9.8-2
Severity: wishlist

Dear Maintainer,

Currently electrum/python-electrum depends on python-qt4 which pull in a
bunch of QT libraries.  It is possible to use electrum from the command-line
and one of the common use-cases is running electrum from an USB key in a
sign-only mode for an offline wallet. In such an instance, using the GUI is
not necessary. Could the QT dependency be brought down to a Recommends?

Cheers,
shane



-- System Information:
Debian Release: jessie/sid
  APT prefers testing-updates
  APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.16-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#723023: clonezilla: Missing Depends

[Shane Wegner]

Package: clonezilla
Version: 3.5.2-1
Severity: important

Dear Maintainer,

I just installed clonezilla on a Debian rescue system to clone over a disk to a 
Samba drive. In doing this, I had to install a few packages which you may 
consider bringing in via Depends, Recommends and Suggests.

Depends:
file: Called by the script at various points
pigz: default compression. Arguably, clonezilla should check its presence and 
not set it as default if it doesn't exist but there it is. Clones fail without 
this in beginner mode.
Recommends:
partclone: Primary cloning utility for clonezilla. We need this for ntfs
partimage: for unsupported filesystems
Suggests:
openssh-client: clonezilla can transfer images over ssh
cifs-utils: for mounting CIFS file shares for image transfer

-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages clonezilla depends on:
ii  drbl  2.4.19-1

clonezilla recommends no packages.

clonezilla suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#664239: gnome-orca: No speech on startup

[Shane Wegner]

Package: gnome-orca
Version: 3.2.2-2
Severity: important

continuum:~$ orca

Traceback (most recent call last):
  File "/usr/lib/pymodules/python2.7/orca/speech.py", line 100, in 
_initSpeechServer
[''])
ImportError: No module named gnomespeechfactory

There is no speech after upgrading to Orca 3.2.

I am not sure how to debug this, let me know if I can be of any help here.



-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable'), (10, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages gnome-orca depends on:
ii  at-spi2-core   2.3.91-1
ii  gir1.2-gtk-3.0 3.2.3-1
ii  gir1.2-pango-1.0   1.29.4-2
ii  gir1.2-wnck-3.03.2.1-1
ii  libatk-adaptor 2.3.91-1
ii  python 2.7.2-10
ii  python-brlapi  4.3-1
ii  python-cairo   1.8.8-1+b2
ii  python-dbus0.84.0-3
ii  python-gi  3.1.0-2
ii  python-louis   2.4.1-1
ii  python-pyatspi22.3.4+dfsg-1
ii  python-speechd 0.7.1-6.1
ii  python-support 1.0.14
ii  python-xdg 0.19-3
ii  speech-dispatcher  0.7.1-6.1

Versions of packages gnome-orca recommends:
ii  brltty-x11  
ii  gnome-mag   1:0.16.3-1
ii  wget1.13.4-2

gnome-orca suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#618439: bitcoind: Conflicts with bitcoin-cli

[Shane Wegner]

Package: bitcoind
Version: 0.3.20.01~dfsg-1
Severity: important

Unpacking bitcoind (from .../bitcoind_0.3.20.01~dfsg-1_amd64.deb) ...
dpkg: error processing
/var/cache/apt/archives/bitcoind_0.3.20.01~dfsg-1_amd64.deb (--unpack):
 trying to overwrite '/usr/share/man/man1/bitcoind.1.gz', which is also in
/package bitcoin-cli 0.3.19~dfsg-6
configured to not write apport reports
  dpkg-deb: subprocess paste killed by
signal (Broken pipe)
Processing triggers for man-db ...
Errors were encountered while processing:
 /var/cache/apt/archives/bitcoind_0.3.20.01~dfsg-1_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable'), (10, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.37-continuum.2 (SMP w/8 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages bitcoind depends on:
ii  libboost-filesystem1.42 1.42.0-4 filesystem operations (portable pa
ii  libboost-program-option 1.42.0-4 program options library for C++
ii  libboost-system1.42.0   1.42.0-4 Operating system (e.g. diagnostics
ii  libboost-thread1.42.0   1.42.0-4 portable C++ multi-threading
ii  libc6   2.11.2-11Embedded GNU C Library: Shared lib
ii  libcrypto++85.6.0-6  General purpose cryptographic libr
ii  libdb4.8++  4.8.30-4 Berkeley v4.8 Database Libraries f
ii  libgcc1 1:4.5.2-4GCC support library
ii  libglib2.0-02.24.2-1 The GLib library of C routines
ii  libssl0.9.8 0.9.8o-5 SSL shared libraries
ii  libstdc++6  4.4.5-12 The GNU Standard C++ Library v3
ii  zlib1g  1:1.2.3.4.dfsg-3 compression library - runtime

bitcoind recommends no packages.

Versions of packages bitcoind suggests:
pn  db4.7-util (no description available)
ii  db4.8-util4.8.30-4   Berkeley v4.8 Database Utilities



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#615619: bitcoin-cli: Fails to build on Wheezy

[Shane Wegner]

Package: bitcoin-cli
Version: 0.3.19~dfsg-6
Severity: serious
Justification: fails to build from source

$ debian/rules build
...
g++ -g -O2 -D__WXGTK__ -DNOPCH -DUSE_SSL -DFOURWAYSSE2 -D__WXDEBUG__ -o
bitcoind obj/nogui/util.o obj/nogui/script.o obj/nogui/db.o obj/nogui/net.o
obj/nogui/irc.o obj/nogui/main.o obj/nogui/rpc.o obj/nogui/init.o
obj/sha256.o -l boost_system-mt -l boost_filesystem-mt -l
boost_program_options-mt -l boost_thread-mt -l db_cxx -l ssl -l crypto
-lcrypto++   -l gthread-2.0 -l z -l dl
/usr/bin/ld.bfd.real: obj/nogui/rpc.o: undefined reference to symbol
-'pthread_getspecific@@GLIBC_2.2.5'
/usr/bin/ld.bfd.real: note: 'pthread_getspecific@@GLIBC_2.2.5' is defined in
/DSO /lib64/libpthread.so.0 so try adding it to the linker command line
/lib64/libpthread.so.0: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[1]: *** [bitcoind] Error 1
make[1]: Leaving directory `/tmp/bitcoin-0.3.19~dfsg/src'
make: *** [debian/stamp-makefile-build] Error 2

Adding -lpthread to the linker options fixes this.

-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable'), (10, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.37-continuum.2 (SMP w/8 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages bitcoin-cli depends on:
ii  libboost-filesystem1.42 1.42.0-4 filesystem operations (portable pa
ii  libboost-program-option 1.42.0-4 program options library for C++
ii  libboost-system1.42.0   1.42.0-4 Operating system (e.g. diagnostics
ii  libboost-thread1.42.0   1.42.0-4 portable C++ multi-threading
ii  libc6   2.11.2-11Embedded GNU C Library: Shared lib
ii  libcrypto++85.6.0-6  General purpose cryptographic libr
ii  libdb4.8++  4.8.30-4 Berkeley v4.8 Database Libraries f
ii  libgcc1 1:4.5.2-4GCC support library
ii  libglib2.0-02.24.2-1 The GLib library of C routines
ii  libssl0.9.8 0.9.8o-5 SSL shared libraries
ii  libstdc++6  4.4.5-12 The GNU Standard C++ Library v3
ii  zlib1g  1:1.2.3.4.dfsg-3 compression library - runtime

bitcoin-cli recommends no packages.

Versions of packages bitcoin-cli suggests:
pn  db4.7-util (no description available)
ii  db4.8-util4.8.30-4   Berkeley v4.8 Database Utilities

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#576226: Orca doesn't start at all

[Shane Wegner]

Package: gnome-orca
Version: 2.30.2-1
Severity: normal

Confirmed over here. The log reads:
Traceback (most recent call last):
  File "", line 1, in 
  File "/usr/lib/pymodules/python2.6/orca/orca.py", line 66, in 
import dbus.mainloop.glib
ImportError: No module named dbus.mainloop.glib

Installing python-dbus seemed to address it for me. Maybe should depend.

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable'), (10, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.36-continuum.1 (SMP w/8 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages gnome-orca depends on:
ii  libgail-gnome-module1.20.3-1 GNOME Accessibility Implementation
ii  libgnome-speech71:0.4.25-2   GNOME text-to-speech library
ii  python  2.6.6-3+squeeze1 interactive high-level object-orie
ii  python-brlapi   4.2-4Python bindings for BrlAPI
ii  python-gnome2   2.28.1-1 Python bindings for the GNOME desk
ii  python-gtk2 2.17.0-4 Python bindings for the GTK+ widge
ii  python-louis2.0.0-1  Python bindings for liblouis
ii  python-pyatspi  1.30.1-2 Assistive Technology Service Provi
ii  python-support  1.0.10   automated rebuilding support for P

Versions of packages gnome-orca recommends:
ii  gnome-mag 1:0.16.1-2 a screen magnifier for the GNOME d
ii  wget  1.12-2.1   retrieves files from the web

gnome-orca suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#562676: postgresql-8.4: Upgrade from 8.3 fails

[Shane Wegner]

Package: postgresql-8.4
Version: 8.4.1-1
Severity: important

Hi,

I attempted an upgrade according to README.debian. pg_dropcluster 8.4 main 
--stop
pg_upgradecluster 8.3 main

Fixing hardcoded library paths for stored procedures...
Upgrading database template1...
pg_restore: [archiver (db)] Error while PROCESSING TOC:
pg_restore: [archiver (db)] Error from TOC entry 1730; 1262 1 DATABASE 
template1 postgres
pg_restore: [archiver (db)] could not execute query: ERROR:  database 
"template1" already exists
Command was:
CREATE DATABASE template1 WITH TEMPLATE = template0 ENCODING = 'SQL_ASCII';
WARNING: errors ignored on restore: 1
Analyzing database template1...
Copying old configuration files...
Copying old start.conf...
Stopping target cluster...
Stopping old cluster...
pg_ctl: server does not shut down
Disabling automatic startup of old cluster...
Configuring old cluster to use a different port (5433)...
Starting target cluster on the original port...
Error: Port conflict: another instance is already running on 
/var/run/postgresql with port 5432
Error: Could not start target cluster; please check configuration and log files


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable'), (10, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-continuum.1 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages postgresql-8.4 depends on:
ii  libc6   2.10.2-2 GNU C Library: Shared libraries
ii  libcomerr2  1.41.9-1 common error description library
ii  libgssapi-krb5-21.7+dfsg-3   MIT Kerberos runtime libraries - k
ii  libkrb5-3   1.7+dfsg-3   MIT Kerberos runtime libraries
ii  libldap-2.4-2   2.4.17-2.1   OpenLDAP libraries
ii  libpam0g1.1.0-4  Pluggable Authentication Modules l
ii  libpq5  8.4.1-1  PostgreSQL C client library
ii  libssl0.9.8 0.9.8k-7 SSL shared libraries
ii  libxml2 2.7.6.dfsg-1 GNOME XML library
ii  locales 2.10.2-2 GNU C Library: National Language (
ii  postgresql-client-8.4   8.4.1-1  front-end programs for PostgreSQL 
ii  postgresql-common   102  PostgreSQL database-cluster manage
ii  ssl-cert1.0.25   simple debconf wrapper for OpenSSL
ii  tzdata  2009s-1  time zone and daylight-saving time

postgresql-8.4 recommends no packages.

Versions of packages postgresql-8.4 suggests:
pn  oidentd | ident-server (no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#561634: xorg: Unable to start after upgrade

[Shane Wegner]

Package: xorg
Version: 1:7.4+4
Severity: important

Hi,

After upgrading to Xorg, I cannot start X and the errors in the logs are not
very helpful. I am attaching my xorg.conf and log output but if I can
provide any further detail, do let me know. This system is an Intel DG45
mainboard connected to an LCD television. No keyboard or mouse is installed
and control is via LIRC.

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing'), (400, 'unstable'), (350, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.31-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages xorg depends on:
ii  libgl1-mesa-dri   7.6-1  A free implementation of the OpenG
ii  libgl1-mesa-glx [libgl1]  7.6-1  A free implementation of the OpenG
ii  libglu1-mesa  7.6-1  The OpenGL utility library (GLU)
ii  x11-apps  7.5+1  X applications
ii  x11-session-utils 7.5+1  X session utilities
ii  x11-utils 7.5+1  X11 utilities
ii  x11-xfs-utils 7.4+1  X font server utilities
ii  x11-xkb-utils 7.5+1  X11 XKB utilities
ii  x11-xserver-utils 7.5+1  X server utilities
ii  xauth 1:1.0.4-1  X authentication utility
ii  xfonts-100dpi 1:1.0.0-4  100 dpi fonts for X
ii  xfonts-75dpi  1:1.0.0-4  75 dpi fonts for X
ii  xfonts-base   1:1.0.0-6  standard fonts for X
ii  xfonts-scalable   1:1.0.0-7  scalable fonts for X
ii  xfonts-utils  1:7.5+1X Window System font utility progr
ii  xinit 1.2.0-1X server initialisation tool
ii  xkb-data  1.7-1  X Keyboard Extension (XKB) configu
ii  xorg-docs-core1:1.4-5Core documentation for the X.org X
ii  xserver-xorg  1:7.4+4the X.Org X server
ii  xterm [x-terminal-emulator]   251-1  X terminal emulator

xorg recommends no packages.

Versions of packages xorg suggests:
pn  xorg-docs  (no description available)

-- no debconf information
Section "ServerLayout"
Identifier "X.org Configured"
Screen  0  "Screen0" 0 0
#InputDevice"Mouse0" "CorePointer"
#InputDevice"Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath   "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load  "dbe"
Load  "xtrap"
Load  "glx"
Load  "extmod"
Load  "dri2"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver  "kbd"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver  "mouse"
Option  "Protocol" "auto"
Option  "Device" "/dev/input/mice"
Option  "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier   "Monitor0"
VendorName   "Monitor Vendor"
ModelName"Monitor Model"
#Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync 
+vsync
#Option  "PreferredMode"  "1600x1200R"
Modeline "1280x720"   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync
Option  "PreferredMode"  "1280x720"
EndSection

Section "Device"
Identifier  "Card0"
Driver  "intel"
VendorName  "Intel Corporation"
BoardName   "4 Series Chipset Integrated Graphics Controller"
BusID   "PCI:0:2:0"
#Option "AccelMethod"   "UXA"
#Option "Tiling""False"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Option "Monitor-HDMI-1" "Monitor0"
SubSection "Display"
Viewport   0 0
Depth 24
#Modes "1280x...@60"
EndSubSection
EndSection


X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-2-amd64 x86_64 Debian
Current Operating System: Linux chintoka 2.6.31-1-amd64 #1 SMP Mon Nov 16 
04:44:38 UTC 2009 x86_64
Build Date: 13 October 2009  09:39:10AM
xorg-server 2:1.6.5-1 (jcris...@debian.org) 
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 18 14:28:09 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor ""
(**) |   |-->Device "Card0"
(==) No monitor specified for screen "Screen0".

Bug#533034: dnssec-tools: Version 1.5 is out

[Shane Wegner]

Package: dnssec-tools
Version: 1.4.1-2
Severity: wishlist

Has support for dnssec3 (bind 9.6) so probably worth looking at.

Cheers,
Shane



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#524517: ITP: cachefilesd -- CACHE ON ALREADY MOUNTED FILESYSTEM

[Shane Wegner]

Package: wnpp
Severity: wishlist
Owner: Shane Wegner 

* Package name: cachefilesd
  Version : 0.9
  Upstream Author : David Howells 
* URL : http://people.redhat.com/~dhowells/fscache/
* License : GPL
  Programming Lang: C
  Description : Support fscache ON ALREADY MOUNTED FILESYSTEM

FSCache is a generic caching manager in the Linux kernel which can be used
by network and other filesystems to cache data locally.

CacheFiles is an FSCache backend that's meant to use as a cache a directory on
an already mounted filesystem of a local type (such as Ext3).  This package
installs the userspace support required by the cachefiles backend.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#519654: libauthen-simple-pam-perl: Fails to load if libauthen-simple-perl is not installed

[Shane Wegner]

Package: libauthen-simple-pam-perl
Version: 0.2-2
Severity: important

A dependency on libauthen-simple-perl would fix this.

continuum:~$ perl -e 'use Authen::Simple::PAM;'
Base class package "Authen::Simple::Adapter" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains:
/home/shane/perl/lib/x86_64-linux-gnu-thread-multi /home/shane/perl/lib
/etc/perl /usr/local/lib/perl/5.10.0 /usr/local/share/perl/5.10.0
//usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10
// /usr/local/lib/site_perl .).
 at /usr/share/perl5/Authen/Simple/PAM.pm line 5
BEGIN failed--compilation aborted at /usr/share/perl5/Authen/Simple/PAM.pm
line 5.
Compilation failed in require at -e line 1.
BEGIN failed--compilation aborted at -e line 1.


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable'), (10, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.28.4-continuum.1 (SMP w/4 CPU cores; PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages libauthen-simple-pam-perl depends on:
ii  libauthen-pam-perl   0.16-1.1+b1 Perl interface to PAM library
ii  perl 5.10.0-19   Larry Wall's Practical Extraction 

libauthen-simple-pam-perl recommends no packages.

libauthen-simple-pam-perl suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#519505: clamav-milter: Add option to skip scanning of authenticated smtp users

[Shane Wegner]

Package: clamav-milter
Version: 0.94.dfsg-2
Severity: wishlist
Tags: patch

When Sendmail is acting as a SmartHost, it is useful to skip scanning when
the connection is authenticated.  This patch adds the --no-scan-auth option
to do this (off by default).

Shane
diff -ur clamav-0.94.dfsg.2.orig/clamav-milter/clamav-milter.c clamav-0.94.dfsg.2/clamav-milter/clamav-milter.c
--- clamav-0.94.dfsg.2.orig/clamav-milter/clamav-milter.c	2009-03-12 22:11:18.0 -0700
+++ clamav-0.94.dfsg.2/clamav-milter/clamav-milter.c	2009-03-12 23:19:24.0 -0700
@@ -383,6 +383,7 @@
 static	int	oflag = 0;	/* scan messages from our machine? */
 static	int	lflag = 0;	/* scan messages from our site? */
 static	int	Iflag = 0;	/* Added an IP addr to localNets? */
+static int auflag = 1;/* scan authenticated users */
 static	const	char	*progname;	/* our name - usually clamav-milter */
 
 /* Variables for --external */
@@ -685,6 +686,7 @@
 	puts(_("\t--ignore IPaddr\t\t-I IPaddr\tAdd IPaddr to LAN IP list (see --local)."));
 	puts(_("\t--local\t\t\t-l\tScan messages sent from machines on our LAN."));
 	puts(_("\t--max-childen\t\t-m\tMaximum number of concurrent scans."));
+	puts(_("\t--no-scan-auth\t\tSkip scanning of authenticated users"));
 	puts(_("\t--outgoing\t\t-o\tScan outgoing messages from this machine."));
 	puts(_("\t--noreject\t\t-N\tDon't reject viruses, silently throw them away."));
 	puts(_("\t--noxheader\t\t-n\tSuppress X-Virus-Scanned/X-Virus-Status headers."));
@@ -868,6 +870,9 @@
 "local", 0, NULL, 'l'
 			},
 			{
+"no-scan-auth", 0, &auflag, 0
+			},
+			{
 "noreject", 0, NULL, 'N'
 			},
 			{
@@ -2990,6 +2995,13 @@
 
 	logg("*clamfi_envfrom: %s\n", argv[0]);
 
+	if (!auflag) {
+		char *auth_authen;
+		auth_authen = smfi_getsymval(ctx, "{auth_authen}");
+		if (auth_authen)
+		return SMFIS_ACCEPT;
+	}
+
 	if(isWhitelisted(argv[0], 0)) {
 		logg(_("*clamfi_envfrom: ignoring whitelisted message"));
 		return SMFIS_ACCEPT;

Bug#505038: kernel-package: Does not include complete asm tree in linux-headers

[Shane Wegner]

Package: kernel-package
Version: 11.0011
Severity: normal

Hi,

Not sure if this is a bug in kernel-package or the kernel so feel free to
close if I am off-base.  On recent kernels (2.6.28-rc) they've moved most of
include/asm-(arch) into arch/(arch)/include which don't seem to get included
in linux-headers package.  So, when an external module goes to include say
linux/types.h which in turn includes asm/types.h, that file doesn't exist.



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.27.2-continuum.1 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages kernel-package depends on:
ii  binutils2.18.1~cvs20080103-7 The GNU assembler, linker and bina
ii  debianutils 2.30 Miscellaneous utilities specific t
ii  dpkg1.14.22  Debian package management system
ii  dpkg-dev1.14.22  Debian package development tools
ii  file4.26-1   Determines file type using "magic"
ii  gcc [c-compiler]4:4.3.2-2The GNU C compiler
ii  gcc-4.1 [c-compiler 4.1.2-23 The GNU C compiler
ii  gcc-4.2 [c-compiler 4.2.4-4  The GNU C compiler
ii  gcc-4.3 [c-compiler 4.3.2-1  The GNU C compiler
ii  gettext 0.17-4   GNU Internationalization utilities
ii  make3.81-5   The GNU version of the "make" util
ii  module-init-tools   3.4-1tools for managing Linux kernel mo
ii  perl5.10.0-16Larry Wall's Practical Extraction 
ii  po-debconf  1.0.15   manage translated Debconf template
ii  util-linux  2.13.1.1-1   Miscellaneous system utilities

Versions of packages kernel-package recommends:
ii  bzip2 1.0.5-1high-quality block-sorting file co
ii  libc6-dev [libc-dev]  2.7-15 GNU C Library: Development Librari

Versions of packages kernel-package suggests:
ii  docbook-utils 0.6.14-1.1 Convert Docbook files to other for
ii  e2fsprogs 1.41.2-1   ext2/ext3/ext4 file system utiliti
ii  initramfs-tools [linux-in 0.92j  tools for generating an initramfs
pn  libdb3-dev (no description available)
ii  libncurses5-dev [libncurs 5.6+20080830-1 developer's libraries and docs for
pn  linux-source | kernel-sou  (no description available)
ii  xmlto 0.0.20-3   XML-to-any converter

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#493400: lirc-modules-source: Fails to build against 2.6.26-1-amd64 kernel gcc-4.1 -Wp,-MD,/usr/src/modules/lirc/drivers/lirc_dev/.lirc_dev.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/

[Shane Wegner]

Package: lirc-modules-source
Version: 0.8.3-2
Severity: normal



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.25-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages lirc-modules-source depends on:
ii  bzip2 1.0.5-0.1  high-quality block-sorting file co
ii  debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii  debhelper 7.0.15 helper programs for debian/rules
ii  debianutils   2.30   Miscellaneous utilities specific t
ii  module-assistant  0.10.11.0  tool to make module package creati
ii  ucf   3.007  Update Configuration File: preserv

lirc-modules-source recommends no packages.

Versions of packages lirc-modules-source suggests:
ii  kernel-package11.001-0.1 A utility for building Linux kerne
pn  linux-source   (no description available)

-- debconf information:
  lirc-modules-source/use_lirc_hints: true
  lirc-modules-source/parallel_irq: 7
  lirc-modules-source/do-build: false
  lirc-modules-source/parallel_timer: 65536
  lirc-modules-source/sir_type: Other
  lirc-modules-source/serial_softcarrier: false
  lirc-modules-source/kernel-source-not-found:
  lirc-modules-source/serial_transmitter: true
  lirc-modules-source/it87_type: Standard
  lirc-modules-source/not_needed:
  lirc-modules-source/serial_port: 0x3f8
* lirc-modules-source/drivers: gpio, i2c, mceusb2
  lirc-modules-source/serial_irq: 4
  lirc-modules-source/serial_type: Other
  lirc-modules-source/kernel-source: /usr/src/linux/
  lirc-modules-source/sir_irq: 3
  lirc-modules-source/sir_port: 0x2f8
  lirc-modules-source/parallel_port: 0x378
* lirc-modules-source/what_next:



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#493397: zaptel-source: Fails to build against 2.6.26

[Shane Wegner]

Package: zaptel-source
Version: 1:1.4.11~dfsg-1
Severity: normal


m-a -t -l 2.6.26-1-amd64 a-i zaptel
...
  CC [M]  /usr/src/modules/zaptel/kernel/zaptel-base.o
/usr/src/modules/zaptel/kernel/zaptel-base.c: In function 'zt_register':
/usr/src/modules/zaptel/kernel/zaptel-base.c:5285: error: implicit declaration 
of function 'class_device_create'
/usr/src/modules/zaptel/kernel/zaptel-base.c: In function 'zt_unregister':
/usr/src/modules/zaptel/kernel/zaptel-base.c:5340: error: implicit declaration 
of function 'class_device_destroy'
make[4]: *** [/usr/src/modules/zaptel/kernel/zaptel-base.o] Error 1


-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.25-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages zaptel-source depends on:
ii  bzip2 1.0.5-0.1  high-quality block-sorting file co
ii  debhelper 7.0.15 helper programs for debian/rules
ii  module-assistant  0.10.11.0  tool to make module package creati

Versions of packages zaptel-source recommends:
ii  zaptel   1:1.4.11~dfsg-1 zapata telephony utilities

zaptel-source suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#491923: asterisk-app-fax: not installable on current testing

[Shane Wegner]

Package: asterisk-app-fax
Severity: grave
Justification: renders package unusable

continuum:~# apt-get install asterisk-app-fax
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.

Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
  asterisk-app-fax: Conflicts: libspandsp1 (>= 0.0.3) but 0.0.5~pre4-1 is to be 
installed
E: Broken packages



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.25-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages asterisk-app-fax depends on:
ii  asterisk [asterisk-1.4]  1:1.4.20~dfsg-1 Open Source Private Branch Exchang
ii  libc62.7-10  GNU C Library: Shared libraries
pn  libspandsp3(no description available)

Versions of packages asterisk-app-fax recommends:
ii  ghostscript [gs-common]  8.62.dfsg.1-2.1 The GPL Ghostscript PostScript/PDF
pn  libconfig-tiny-perl(no description available)
pn  libfile-sync-perl  (no description available)
ii  liblocale-gettext-perl   1.05-4  Using libc functions for internati
pn  libmime-lite-perl  (no description available)
ii  libpaper-utils   1.1.23+nmu1 library for handling paper charact
ii  libtiff-tools3.8.2-10TIFF manipulation and conversion t
pn  psutils(no description available)



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#485279: grub-probe reports out of memory

[Shane Wegner]

Package: grub
Version: 0.97-39
Severity: important

I'm not really sure what information I can provide to diagnose this so feel
free to let me know if I can supply any additional information.

continuum:~# update-grub
Searching for GRUB installation directory ... found: /boot/grub
grub-probe: error: out of memory

The system is amd64, 4gb ram, with 5 750gb scsi drives installed.

/boot is a raid1 spanning the five drives, 160mb
The rest of the drive space is devided into 3 250gb raid5 partitions, all on
/a 3tb lvm group.  I am attaching the strace output of
grub-probe --device-map=/boot/grub/device.map -t device / as is called in
/update-grub.

Shane


-- Package-specific info:

*** BEGIN /boot/grub/device.map
(hd0)   /dev/sda
(hd1)   /dev/sdb
(hd2)   /dev/sdc
(hd3)   /dev/sdd
(hd4)   /dev/sde
*** END /boot/grub/device.map

*** BEGIN /proc/mounts
/dev/mapper/vg0-root / ext3 rw,relatime,errors=continue,data=ordered 0 0
/dev/mapper/vg0-root /dev/.static/dev ext3 rw,errors=continue,data=ordered 0 0
/dev/md0 /boot ext3 rw,errors=continue,data=ordered 0 0
*** END /proc/mounts

*** BEGIN /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
#grub-install(8), grub-floppy(8),
#grub-md5-crypt, /usr/share/doc/grub
#and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5

### PASSWORD LINE REMOVED ###
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
### PASSWORD LINE REMOVED ###
### PASSWORD LINE REMOVED ###
### PASSWORD LINE REMOVED ###


### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##  kopt_2_6_8=root=/dev/hdc1 ro
##  kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/mapper/vg0-root ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##  alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##  lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=

## should update-grub lock old automagic boot options
## e.g. lockold=false
##  lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##  altoptions=(single-user) single
# altoptions=(single-user mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##  howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##  memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title   Debian GNU/Linux, kernel 2.6.25-continuum.1
root(hd0,0)
kernel  /vmlinuz-2.6.25-continuum.1 root=/dev/mapper/vg0-root ro 
initrd  /initrd.img-2.6.25-continuum.1

title   Debian GNU/Linux, kernel 2.6.25-continuum.1 (single-user mode)
root(hd0,0)
kernel  /vmlinuz-2.6.25-continuum.1 root=/dev/mapper/vg0-root ro single
initrd  /initrd.img-2.6.25-continuum.1

title   Debian GNU/Linux, kernel 2.6.24.4-continuum.1
root 

Bug#480309: freevo: Bug is in pygame

[Shane Wegner]

Package: freevo
Followup-For: Bug #480309

Had this problem as well.  Appears to be limited to amd64 machines and the
source is in the pygame package.  Patch to pygame is below and included in
freevo SVN branch for v1.x.  Recompiled pygame after removing python 2.4
deps as the patch seems to depend on v2.5 and all is working here.

Shane
--- src/image.c.old	2005-03-13 02:12:35.0 +0100
+++ src/image.c	2007-03-14 21:09:30.0 +0100
@@ -291,7 +291,8 @@
 	PyObject *surfobj, *string=NULL;
 	char *format, *data, *pixels;
 	SDL_Surface *surf, *temp=NULL;
-	int w, h, color, len, flipped=0;
+	int w, h, color, flipped=0;
+	Py_ssize_t len;
 	int Rmask, Gmask, Bmask, Amask, Rshift, Gshift, Bshift, Ashift, Rloss, Gloss, Bloss, Aloss;
 	int hascolorkey, colorkey;
 
@@ -331,7 +332,7 @@
 	}
 	else if(!strcmp(format, "RGB"))
 	{
-		string = PyString_FromStringAndSize(NULL, surf->w*surf->h*3);
+		string = PyString_FromStringAndSize(NULL, (Py_ssize_t)surf->w*surf->h*3);
 		if(!string)
 			return NULL;
 		PyString_AsStringAndSize(string, &data, &len);
@@ -407,7 +408,7 @@
 		if(strcmp(format, "RGBA"))
 			hascolorkey = 0;
 
-		string = PyString_FromStringAndSize(NULL, surf->w*surf->h*4);
+		string = PyString_FromStringAndSize(NULL, (Py_ssize_t)surf->w*surf->h*4);
 		if(!string)
 			return NULL;
 		PyString_AsStringAndSize(string, &data, &len);
@@ -605,7 +606,8 @@
 	PyObject *string;
 	char *format, *data;
 	SDL_Surface *surf = NULL;
-	int w, h, len, flipped=0;
+	int w, h, flipped=0;
+	Py_ssize_t len;
 	int loopw, looph;
 
 	if(!PyArg_ParseTuple(arg, "O!(ii)s|i", &PyString_Type, &string, &w, &h, &format, &flipped))
@@ -729,7 +731,8 @@
 	PyObject *buffer;
 	char *format, *data;
 	SDL_Surface *surf = NULL;
-	int w, h, len;
+	int w, h;
+	Py_ssize_t len;
 PyObject *surfobj;
 
 	if(!PyArg_ParseTuple(arg, "O(ii)s|i", &buffer, &w, &h, &format))

Bug#464203: asterisk-app-fax: fails to load with Asterisk 1.4.17

[Shane Wegner]

Package: asterisk-app-fax
Version: 0.0.20070624-1
Severity: normal

The rxfax and txfax plugins didn't load for on install from the archive.  A
quick rebuild against latest spandsp-dev and asterisk-dev fixed it for me. 
Not sure if others can confirm.

Shane

-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.24-continuum.1 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages asterisk-app-fax depends on:
ii  asterisk  1:1.4.17~dfsg-2+b1 Open Source Private Branch Exchang
ii  libc6 2.7-6  GNU C Library: Shared libraries
ii  libspandsp3   0.0.4pre16-1   Telephony signal processing librar

Versions of packages asterisk-app-fax recommends:
ii  ghostscript [gs-common]8.61.dfsg.1-1 The GPL Ghostscript PostScript/PDF
pn  libconfig-tiny-perl(no description available)
pn  libfile-sync-perl  (no description available)
ii  liblocale-gettext-perl 1.05-1Using libc functions for internati
pn  libmime-lite-perl  (no description available)
ii  libpaper-utils 1.1.23library for handling paper charact
ii  libtiff-tools  3.8.2-7   TIFF manipulation and conversion t
pn  psutils(no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#454342: asterisk: tos-libcap patch is broken

[Shane Wegner]

Package: asterisk
Version: 1:1.4.13~dfsg-1
Severity: normal

Hi,

Was getting the following error in my Asterisk log:
[Dec  4 09:49:18] WARNING[5787] rtp.c: Unable to set TOS to 184

Some poking around the tree and it looks like though the tos-libcap patch is
getting applied, that patch depends on
#define HAVE_CAP 1

somewhere in the build process.  I dropped it in at the top of
main/asterisk.c where the actual capability code sits and it fixed my
problem.  Probably best to do it using autoheader in autoconf.h.in though.

Best,
Shane

-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.23.1-continuum.3 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages asterisk depends on:
ii  adduser   3.105  add and remove users and groups
ii  asterisk-config-freep 2.3.0~dfsg-1   FreePBX - config files for the Ast
ii  asterisk-sounds-main  1:1.4.13~dfsg-1Core Sound files for Asterisk (Eng
ii  libasound21.0.15-2   ALSA library
ii  libc-client2006j2 7:2006j2.dfsg-3UW c-client library for mail proto
ii  libc6 2.7-3  GNU C Library: Shared libraries
ii  libcap1   1:1.10-14  support for getting/setting POSIX.
ii  libct30.63-3.2   libraries for connecting to MS SQL
ii  libcurl3  7.17.1-1   Multi-protocol file transfer libra
ii  libgcc1   1:4.2.2-3  GCC support library
ii  libgcrypt11   1.2.4-2LGPL Crypto library - runtime libr
ii  libgnutls13   2.0.4-1the GNU TLS library - runtime libr
ii  libgpg-error0 1.4-2  library for common error values an
ii  libgsm1   1.0.12-1   Shared libraries for GSM speech co
ii  libiksemel3   1.2-3  C library for the Jabber IM platfo
ii  libkrb53  1.6.dfsg.3~beta1-2 MIT Kerberos runtime libraries
ii  libncurses5   5.6+20071013-1 Shared libraries for terminal hand
ii  libnewt0.52   0.52.2-11.1Not Erik's Windowing Toolkit - tex
ii  libogg0   1.1.3-2Ogg Bitstream Library
ii  libpopt0  1.10-3 lib for parsing cmdline parameters
ii  libpq58.2.4-2PostgreSQL C client library
ii  libpri1.0 1.4.2-1Primary Rate ISDN specification li
ii  libradiusclient-ng2   0.5.5-1Enhanced RADIUS client library
ii  libsnmp15 5.4.1~dfsg-4   SNMP (Simple Network Management Pr
ii  libspeex1 1.1.12-3   The Speex Speech Codec
ii  libsqlite02.8.17-4   SQLite shared library
ii  libssl0.9.8   0.9.8g-1   SSL shared libraries
ii  libstdc++64.2.2-3The GNU Standard C++ Library v3
ii  libtonezone1  1:1.4.5.1~dfsg-2   tonezone library (runtime)
ii  libvorbis0a   1.2.0.dfsg-2   The Vorbis General Audio Compressi
ii  libvorbisenc2 1.2.0.dfsg-2   The Vorbis General Audio Compressi
ii  unixodbc  2.2.11-16  ODBC tools libraries
ii  zlib1g1:1.2.3.3.dfsg-6   compression library - runtime

asterisk recommends no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#443210: exim4-config: Debconf doesn't prompt for dc_relay_domains when dc_mailtype is smarthost

[Shane Wegner]

Package: exim4-config
Version: 4.67-8
Severity: normal

When smarthost is selected for delivery type, we never get prompted for
dc_relay_domains.  If dc_relay_domains was set previously as in the case the
server used direct SMTP and now uses a SmartHost, it is not possible to
change or clear dc_relay_domains via DebConf.

Our setup delivers email to a SmartHost by default and to domains we relay
for via direct SMTP.


-- Package-specific info:
Exim version 4.67 #1 built 19-Aug-2007 13:51:32
Copyright (c) University of Cambridge 2006
Berkeley DB: Sleepycat Software: Berkeley DB 4.3.29: (September  6, 2005)
Support for: crypteq iconv() IPv6 PAM Perl GnuTLS move_frozen_messages 
Content_Scanning Old_Demime
Lookups: lsearch wildlsearch nwildlsearch iplsearch cdb dbm dbmnz dnsdb dsearch 
ldap ldapdn ldapm mysql nis nis0 passwd pgsql sqlite
Authenticators: cram_md5 cyrus_sasl dovecot plaintext spa
Routers: accept dnslookup ipliteral iplookup manualroute queryprogram redirect
Transports: appendfile/maildir/mailstore/mbx autoreply lmtp pipe smtp
Fixed never_users: 0
Size of off_t: 8
Configuration file is /var/lib/exim4/config.autogenerated

-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.23-rc5-git1-continuum.2 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages exim4-config depends on:
ii  adduser   3.105  add and remove users and groups
ii  debconf [debconf-2.0] 1.5.14 Debian configuration management sy

exim4-config recommends no packages.

-- debconf information excluded



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#339362: php5-pgsql: pgsql extension crashes apache2

[Shane Wegner]

Package: php5-pgsql
Version: 5.0.5-3
Severity: important

I am attempting to upgrade from apache 1 to 2 and am getting a segfault in 
apache2
when the pgsql.so php5 extension is loaded.  This occurs regardless of which
other php extensions are loaded and occurs when pgsql.so is the only
extention enabled.  The segfault is not on startup but rather in the child
process and only occurs on a page which uses the pg functions.

note: php5-pgsql with apache 1.x works fine.

If I can be of any further assistance in tracking this down, please let me
know.

Shane



-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable'), (10, 
'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12-1-speakup-686-smp
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages php5-pgsql depends on:
ii  debconf [debconf-2.0] 1.4.58 Debian configuration management sy
ii  libapache-mod-php5 [phpapi-20 5.0.5-3server-side, HTML-embedded scripti
ii  libapache2-mod-php5 [phpapi-2 5.0.5-3server-side, HTML-embedded scripti
ii  libc6 2.3.5-6GNU C Library: Shared libraries an
ii  libpq48.1.0-2PostgreSQL C client library
ii  php5-common   5.0.5-3Common files for packages built fr

php5-pgsql recommends no packages.

-- debconf information:
* php5/extension_pgsql_cli: true
* php5/extension_pgsql_apache2: true
  php5/remove_extension: true
  php5/add_extension: true
* php5/extension_pgsql_apache: true


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#338231: postgresql-server-dev-8.1: More file conflicts

[Shane Wegner]

Package: postgresql-server-dev-8.1
Version: 8.1.0-1
Followup-For: Bug #338231

Hi,

In addition to the locale conflicts, I am getting the following when
installing postgresql-server-dev-8.1.
Unpacking postgresql-server-dev-8.1 (from 
.../postgresql-server-dev-8.1_8.1.0-1_i386.deb) ...
dpkg: error processing 
/var/cache/apt/archives/postgresql-server-dev-8.1_8.1.0-1_i386.deb (--unpack):
 trying to overwrite `/usr/lib/postgresql/8.1/bin/pg_config', which is also in 
package libpq-dev
dpkg-deb: subprocess paste killed by signal (Broken pipe)

Version of libpq-dev installed is 8.1.0-1.

Best,
Shane




-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'stable'), (400, 'unstable'), (10, 
'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12-1-speakup-686-smp
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#307426: kernel-image-2.6.11-1-686-smp: Does not include Moxa SmartIO support

[Shane Wegner]

Package: kernel-image-2.6.11-1-686-smp
Severity: normal

Hello,

Debian smp kernels > 2.6.10 can probably safely enable CONFIG_MOXA_SMARTIO
(mxser module) as it is no longer broken on smp systems.

Thanks,
Shane

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-ac8
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#299130: lynx: SSL problem logging into website

[Shane Wegner]

Package: lynx
Version: 2.8.5-2
Severity: normal

I recently upgraded from lynx-ssl to lynx 2.8.5-2.  Though I am able to log
onto many ssl sites with a common name nag, I am no longer able to login to
my account at www.americanexpress.ca.  To reproduce, go to
www.americanexpress.ca, enter any username and password and hit the go
button.  It gives an ssl connect error over here.  Reverting to the old
lynx-ssl fixes the problem.  Here's a partial trace.

Lynx Trace Log (2.8.5rel.1)

User message: Trace ON!
GETCH: Got 0x78.
LYReadCmdKey(0) ->x (0x78)
SubmitForm
  link_name=
  link_value=[button_go.gif]-Submit
getfile: getting https://www99.americanexpress.com/myca/logon/canlac/action

HTParse: aName:`https://www99.americanexpress.com/myca/logon/canlac/action'
   relatedName:`'
   want: host
HTParse:  result:`www99.americanexpress.com'

Entered HTAnchor_findAddress
Anchor 0x826e3a8 with address 
`https://www99.americanexpress.com/myca/logon/canlac/action' already exists.
HTAccess: loading document 
https://www99.americanexpress.com/myca/logon/canlac/action
get_physical https://www99.americanexpress.com/myca/logon/canlac/action
HTParse: aName:`https://www99.americanexpress.com/myca/logon/canlac/action'
   relatedName:`file:'
   want: access
HTParse:  result:`https'
HTParse: aName:`https://www99.americanexpress.com/myca/logon/canlac/action'
   relatedName:`'
   want: host
HTParse:  result:`www99.americanexpress.com'
HTParse: aName:`https://www99.americanexpress.com/myca/logon/canlac/action'
   relatedName:`'
   want: access
HTParse:  result:`https'
HTParse: aName:`https://www99.americanexpress.com/myca/logon/canlac/action'
   relatedName:`'
   want: host
HTParse:  result:`www99.americanexpress.com'
Looking up www99.americanexpress.com
Making HTTPS connection to www99.americanexpress.com
TCP: Error 115 in `SOCKET_ERRNO' after call to this socket's first connect() 
failed.
Operation now in progress
TCP: Error 115 in `SOCKET_ERRNO' after call to this socket's first select() 
failed.
Operation now in progress
Retrying connection without TLS.
HTParse: aName:`https://www99.americanexpress.com/myca/logon/canlac/action'
   relatedName:`'
   want: host
HTParse:  result:`www99.americanexpress.com'
Looking up www99.americanexpress.com
Making HTTPS connection to www99.americanexpress.com
TCP: Error 115 in `SOCKET_ERRNO' after call to this socket's first connect() 
failed.
Operation now in progress
TCP: Error 115 in `SOCKET_ERRNO' after call to this socket's first select() 
failed.
Operation now in progress
HTTP: Unable to complete SSL handshake for 
'https://www99.americanexpress.com/myca/logon/canlac/action', SSL_connect=0, 
SSL error stack dump follows
HTTP: SSL: A TLS packet with unexpected length was received.

Alert!: Unable to make secure connection to remote host.

HTAccess:  status=-2
HTAccess: `https://www99.americanexpress.com/myca/logon/canlac/action' has been 
accessed, No data loaded.



-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-ac8
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages lynx depends on:
ii  libbz2-1.0  1.0.2-5  high-quality block-sorting file co
ii  libc6   2.3.2.ds1-20 GNU C Library: Shared libraries an
ii  libgnutls11 1.0.16-9 GNU TLS library - runtime library
ii  libncursesw55.4-4Shared libraries for terminal hand
ii  zlib1g  1:1.2.2-3compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#246984: duplicity: Duplicity should ignore unix sockets

[Shane Wegner]

Package: duplicity
Version: 0.4.1-8
Followup-For: Bug #246984

Not only does it seem to give errors when encountering unix sockets, it
seems to cause problems with incremental backups.  I don't know python and
am unable to read the following traceback but it crashed just after hitting
/dev/log.

Error initializing file /dev/log
Traceback (most recent call last):
  File "/usr/bin/duplicity", line 358, in ?
if __name__ == "__main__": main()
  File "/usr/bin/duplicity", line 352, in main
else: incremental_backup(sig_chain)
  File "/usr/bin/duplicity", line 162, in incremental_backup
bytes_written = write_multivol("inc", tarblock_iter, globals.backend)
  File "/usr/bin/duplicity", line 75, in write_multivol
globals.gpg_profile)
  File "/usr/lib/python2.3/site-packages/duplicity/gpg.py", line 211, in 
GPGWriteFile
try: data = block_iter.next(bytes_to_go).data
  File "/usr/lib/python2.3/site-packages/duplicity/diffdir.py", line 407, in 
next
result = self.process(self.input_iter.next(), size)
  File "/usr/lib/python2.3/site-packages/duplicity/diffdir.py", line 261, in 
get_delta_iter_w_sig
for new_path, sig_path in collated:
  File "/usr/lib/python2.3/site-packages/duplicity/diffdir.py", line 177, in 
collate2iters
try: relem2 = riter2.next()
  File "/usr/lib/python2.3/site-packages/duplicity/diffdir.py", line 234, in 
combine_path_iters
refresh_triple_list(triple_list)
  File "/usr/lib/python2.3/site-packages/duplicity/diffdir.py", line 222, in 
refresh_triple_list
new_triple = get_triple(old_triple[1])
  File "/usr/lib/python2.3/site-packages/duplicity/diffdir.py", line 211, in 
get_triple
try: path = path_iter_list[iter_index].next()
  File "/usr/lib/python2.3/site-packages/duplicity/diffdir.py", line 153, in 
sigtar2path_iter
ropath.init_from_tarinfo(tarinfo)
  File "/usr/lib/python2.3/site-packages/duplicity/path.py", line 171, in 
init_from_tarinfo
else: raise PathException("Unknown tarinfo type %s" % (type,))
duplicity.path.PathException: Unknown tarinfo type

Shane


-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing'), (450, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-ac8
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages duplicity depends on:
ii  gnupg   1.2.4-4  GNU privacy guard - a free PGP rep
ii  libc6   2.3.2.ds1-20 GNU C Library: Shared libraries an
ii  librsync1   0.9.7-1  Library which implements the rsync
ii  python-gnupginterface   0.3.2-4  Python interface to GnuPG (GPG)
ii  python2.3   2.3.4-18 An interactive high-level object-o

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]