Bug#911031: installation-reports: sorry to shorten it would wreck it.. security code bugs out when entered
I'm sorry I reinstalled today.. I couldn't get to the logs, I was locked out from them, and even if I could not read them all because of the security error issue.. I still have the error on my machine that is preventing the new upgrade from installing the re install did not fix that a usb 07 is reporting and unexpected value.. it runs it 3 times then is fails to install.the new Kernel upgrade to 9.5 They are all working fine as far as I can tell. So i can't contribute to the discussion on it.. and after the new install it at least let me into the logs but the old ones are gone now.. so I can't include them as requested.. and I can install things On Sun, Oct 14, 2018 at 4:33 PM Wicca Robin wrote: > Package: installation-reports > Severity: important > > Dear Maintainer, > > *** Reporter, please consider answering these questions, where appropriate > *** > > 1st I can not add the requested program. I can't use my security code it > just > errors out > >* What led up to the situation? > I used the code after a reboot but it is complicated > I had to do a reboot because I was updating the software options > that failed but I also had a failure at home with my keyboard, after which > I > replaced it with one that works > >* What exactly did you do (or not do) that was effective (or > ineffective)? > I attempted to replace my keyboard in hopes it would fix the error when I > rebooted but it did not > I attempted to follow the directions given to clear the issue in the "dkpg" > but they failed to work I tried several ways after the instructions failed > > * What was the outcome of this action? > The outcome is I can't upgrade or add or do anything that requires my > security > code > >* What outcome did you expect instead? > I hoped changing the keyboards out would fix the issue when I rebooted > > *** End of the template - remove these template lines *** > > > > -- Package-specific info: > > Boot method: > Image version: > Date: > > Machine: > Partitions: > > > Base System Installation Checklist: > [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it > > Initial boot: [ ] > Detect network card:[ ] > Configure network: [ ] > Detect CD: [ ] > Load installer modules: [ ] > Clock/timezone setup: [ ] > User/password setup:[ ] > Detect hard drives: [ ] > Partition hard drives: [ ] > Install base system:[ ] > Install tasks: [ ] > Install boot loader:[ ] > Overall install:[ ] > > Comments/Problems: > >and ideas you had during the initial install.> > > > -- > > Please make sure that the hardware-summary log file, and any other > installation logs that you think would be useful are attached to this > report. Please compress large files using gzip. > > Once you have filled out this report, mail it to sub...@bugs.debian.org. > > == > Installer lsb-release: > == > DISTRIB_ID=Debian > DISTRIB_DESCRIPTION="Debian GNU/Linux installer" > DISTRIB_RELEASE="9 (stretch) - installer build 20170615+deb9u4" > X_INSTALLATION_MEDIUM=cdrom > > == > Installer hardware-summary: > == > uname -a: Linux Silly 4.9.0-7-amd64 #1 SMP Debian 4.9.110-1 (2018-07-05) > x86_64 GNU/Linux > lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 > I/O Hub to ESI Port [8086:3405] (rev 12) > lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:836b] > lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O > Hub PCI Express Root Port 1 [8086:3408] (rev 12) > lspci -knn: Kernel driver in use: pcieport > lspci -knn: 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O > Hub PCI Express Root Port 3 [8086:340a] (rev 12) > lspci -knn: Kernel driver in use: pcieport > lspci -knn: 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O > Hub PCI Express Root Port 7 [8086:340e] (rev 12) > lspci -knn: Kernel driver in use: pcieport > lspci -knn: 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O > Hub System Management Registers [8086:342e] (rev 12) > lspci -knn: 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O > Hub GPIO and Scratch Pad Registers [8086:3422] (rev 12) > lspci -knn: 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O > Hub Control Status and RAS Registers [8086:3423] (rev 12) > lspci -knn: 00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O > Hub Throttle Registers [8086:3438] (rev 12
Bug#911031: installation-reports: sorry to shorten it would wreck it.. security code bugs out when entered
Package: installation-reports Severity: important Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** 1st I can not add the requested program. I can't use my security code it just errors out * What led up to the situation? I used the code after a reboot but it is complicated I had to do a reboot because I was updating the software options that failed but I also had a failure at home with my keyboard, after which I replaced it with one that works * What exactly did you do (or not do) that was effective (or ineffective)? I attempted to replace my keyboard in hopes it would fix the error when I rebooted but it did not I attempted to follow the directions given to clear the issue in the "dkpg" but they failed to work I tried several ways after the instructions failed * What was the outcome of this action? The outcome is I can't upgrade or add or do anything that requires my security code * What outcome did you expect instead? I hoped changing the keyboards out would fix the issue when I rebooted *** End of the template - remove these template lines *** -- Package-specific info: Boot method: Image version: Date: Machine: Partitions: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Clock/timezone setup: [ ] User/password setup:[ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="9 (stretch) - installer build 20170615+deb9u4" X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == uname -a: Linux Silly 4.9.0-7-amd64 #1 SMP Debian 4.9.110-1 (2018-07-05) x86_64 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 12) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:836b] lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 12) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 12) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 12) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 12) lspci -knn: 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 12) lspci -knn: 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 12) lspci -knn: 00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 12) lspci -knn: 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: ehci-pci lspci -knn: Kernel modules: ehci_pci lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82ea] lspci -knn: Kernel driver
