Bug#671927: libpoppler-glib6: fails to render full-page background
Package: libpoppler-glib6 Version: 0.16.7-3 Severity: important Tested with pdf viewers which depend on libpoppler: zathura, apvlv, evince, epdfview, okular If a pdf has a full-page background picture it takes about 10-15 sec to open the pdf but the background will not be rendered at all. It only works with okular. With pdf viewers that do not depend on libpoppler like llpp, mupdf it flawlessly works. Exmaple file: http://literaturlatenight.de/test.pdf -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (900, 'testing'), (550, 'unstable'), (250, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.1.0-1-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libpoppler-glib6 depends on: ii libc6 2.13-32 ii libcairo2 1.10.2-7 ii libfreetype62.4.9-1 ii libgcc1 1:4.7.0-3 ii libgdk-pixbuf2.0-0 2.26.1-1 ii libglib2.0-02.32.0-4 ii libpoppler130.16.7-3 ii libstdc++6 4.7.0-3 libpoppler-glib6 recommends no packages. libpoppler-glib6 suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#620652: linux-image-2.6.38-2-686-bigmem: fails to disable error beep
Jonathan Nieder writes: > henry atting wrote: >> Jonathan Nieder writes: > >>> # modprobe -r snd_hda_intel >>> # modprobe snd_hda_intel beep_mode=0 >>> >>> If that works, maybe 2 ("mutable using the software mixer") would be a >>> good default for SND_HDA_INPUT_BEEP_MODE. >> >> This works indeed. Becaus I could not unload it (got a message that it >> is still in use) I put these two lines in /etc/rc.local... and the beep >> is gone. > > Thanks. One final test: if you use beep_mode=2 (instead of beep_mode=0) > and use your usual mixing app, can you cause the beep to go away (i.e., > is there a control for that)? > > Depending on the answer, I think we should: > > * use beep_mode=2 and find some way to advertise (release notes?) >that the mixer can be used to turn the beep on and off, or > > * keep using beep_mode=1 and find some way to advertise that adding >a .conf file to /etc/modprobe.d with > > options snd_hda_intel beep_mode=0 > >will turn the beep off. And if there is some sysfs way to change >the setting at runtime, that would be worth advertising, too. > > Meanwhile I also think it would be a good idea to turn pc speaker > beeps in general off by default, but that's a separate story (and > probably should be filed as a separate bug). Okay, as I could not find a control for the beep in alsamixer I installed gnome-alsamixer and, yes, there is a control for the beep. That way I can turn the beep off. henry -- http://literaturlatenight.de -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#620652: linux-image-2.6.38-2-686-bigmem: fails to disable error beep
Jonathan Nieder writes: > henry atting wrote: >> Jonathan Nieder writes: > >>> # modprobe -r snd_hda_intel >>> # modprobe snd_hda_intel beep_mode=0 >>> >>> If that works, maybe 2 ("mutable using the software mixer") would be a >>> good default for SND_HDA_INPUT_BEEP_MODE. >> >> This works indeed. Becaus I could not unload it (got a message that it >> is still in use) I put these two lines in /etc/rc.local... and the beep >> is gone. > > Thanks. One final test: if you use beep_mode=2 (instead of beep_mode=0) > and use your usual mixing app, can you cause the beep to go away (i.e., > is there a control for that)? As far as I remember there is no control for the beep in alsamixer. As I use pulseaudio maybe there is one in pavucontrol but I can not test it until tomorrow... > Depending on the answer, I think we should: > > * use beep_mode=2 and find some way to advertise (release notes?) >that the mixer can be used to turn the beep on and off, or > > * keep using beep_mode=1 and find some way to advertise that adding >a .conf file to /etc/modprobe.d with > > options snd_hda_intel beep_mode=0 > >will turn the beep off. And if there is some sysfs way to change >the setting at runtime, that would be worth advertising, too. > > Meanwhile I also think it would be a good idea to turn pc speaker > beeps in general off by default, but that's a separate story (and > probably should be filed as a separate bug). In my mind that would be great. -- http://literaturlatenight.de -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#620652: linux-image-2.6.38-2-686-bigmem: fails to disable error beep
Jonathan Nieder writes: > tags 620652 - sid > quit > > Hi Henry, Hi Jonathan, > henry atting wrote: > >> Usually as a last resort removing the pc speaker modules pcspkr and >> snd_pscp effectively disables the error beep. >> Not with this kernel. >> >> In the according directories I removed `pcspkr.ko` and `snd_pcsp.ko`, >> then executed `depmod -a`, then built initird with: >> update-initramfs -u -k all. >> >> Nevertheless the beep on error is still there... > > Could you be more specific? What version did not have this problem? > What do you do to provoke the beep? (I have to ask since on a desktop > there are some situations where a sound file containing a recorded > beep sound is played.) The beep sounds on error (or on shutdown) E.g. I enter `sldj`, hit TAB for completion -> it beeps. No matter if I am on a virtual console or in a terminal emulator. (I know that I can disable it on X with the appropriate xset setting) I use gnome with awesome as a WM. The beep sound is definitively this painful hardware beep and not a sound file. Before this kernel removing the mentioned modules always helped, my last kernel before 2.6.38.* was 2.6.32-5-686-bigmem >> [ 18.175066] input: HDA Digital PCBeep as >> /devices/pci:00/:00:1b.0/input/input13 > > Hmm, this is interesting. What happens if you unload snd_hda_intel > and reload it with beep_mode=0? > > # modprobe -r snd_hda_intel > # modprobe snd_hda_intel beep_mode=0 > > If that works, maybe 2 ("mutable using the software mixer") would be a > good default for SND_HDA_INPUT_BEEP_MODE. This works indeed. Becaus I could not unload it (got a message that it is still in use) I put these two lines in /etc/rc.local... and the beep is gone. > Thanks for reporting, > Jonathan Thanks, henry -- http://literaturlatenight.de -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#620652: linux-image-2.6.38-2-686-bigmem: fails to disable error beep
Package: linux-2.6 Version: 2.6.38-2 Severity: normal Tags: sid Usually as a last resort removing the pc speaker modules pcspkr and snd_pscp effectively disables the error beep. Not with this kernel. In the according directories I removed `pcspkr.ko` and `snd_pcsp.ko`, then executed `depmod -a`, then built initird with: update-initramfs -u -k all. Nevertheless the beep on error is still there... -- Package-specific info: ** Version: Linux version 2.6.38-2-686-bigmem (Debian 2.6.38-2) (b...@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Tue Mar 29 18:09:13 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.38-2-686-bigmem root=/dev/mapper/argon-root ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 14.002820] ext3_orphan_cleanup: deleting unreferenced inode 26983 [ 14.002840] ext3_orphan_cleanup: deleting unreferenced inode 26982 [ 14.002846] ext3_orphan_cleanup: deleting unreferenced inode 26981 [ 14.002859] ext3_orphan_cleanup: deleting unreferenced inode 26980 [ 14.002867] EXT3-fs (dm-1): 4 orphan inodes deleted [ 14.002869] EXT3-fs (dm-1): recovery complete [ 14.019147] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 15.783843] udev[387]: starting version 166 [ 16.117114] ACPI: acpi_idle registered with cpuidle [ 16.119366] Monitor-Mwait will be used to enter C-1 state [ 16.119397] Monitor-Mwait will be used to enter C-2 state [ 16.119402] Marking TSC unstable due to TSC halts in idle [ 16.120636] Switching to clocksource hpet [ 16.367628] input: Ideapad extra buttons as /devices/platform/ideapad/input/input4 [ 16.371209] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 [ 16.396031] ACPI: Lid Switch [LID0] [ 16.396107] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 [ 16.396168] ACPI: Power Button [PWRB] [ 16.396231] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7 [ 16.396269] ACPI: Sleep Button [SLPB] [ 16.396339] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 [ 16.396374] ACPI: Power Button [PWRF] [ 16.721254] i801_smbus :00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 16.721260] ACPI: resource :00:1f.3 [io 0x1c00-0x1c1f] conflicts with ACPI region SMBI [io 0x1c00-0x1c0f] [ 16.721263] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.807884] [drm] Initialized drm 1.1.0 20060810 [ 16.874109] ACPI: AC Adapter [ACAD] (on-line) [ 17.382353] Linux video capture interface: v2.00 [ 17.463368] ACPI: Battery Slot [BAT1] (battery present) [ 17.504494] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (064e:a127) [ 17.547767] input: Lenovo EasyCamera as /devices/pci:00/:00:1d.7/usb2/2-3/2-3:1.0/input/input9 [ 17.547845] usbcore: registered new interface driver uvcvideo [ 17.547847] USB Video Class driver (v1.0.0) [ 17.600722] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input10 [ 17.664668] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input11 [ 17.734412] i915 :00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 17.734417] i915 :00:02.0: setting latency timer to 64 [ 17.773100] i915 :00:02.0: irq 46 for MSI/MSI-X [ 17.773106] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 17.773108] [drm] Driver supports precise vblank timestamp query. [ 17.857757] vgaarb: device changed decodes: PCI::00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 17.858085] fixme: max PWM is zero. [ 17.972152] Console: switching to colour frame buffer device 170x48 [ 17.976165] fb0: inteldrmfb frame buffer device [ 17.976166] drm: registered panic notifier [ 17.979330] acpi device:08: registered as cooling_device2 [ 17.979598] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12 [ 17.979713] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 17.979960] [drm] Initialized i915 1.6.0 20080730 for :00:02.0 on minor 0 [ 17.980068] HDA Intel :00:1b.0: power state changed by ACPI to D0 [ 17.980073] HDA Intel :00:1b.0: power state changed by ACPI to D0 [ 17.980088] HDA Intel :00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 17.980165] HDA Intel :00:1b.0: irq 47 for MSI/MSI-X [ 17.980197] HDA Intel :00:1b.0: setting latency timer to 64 [ 18.175066] input: HDA Digital PCBeep as /devices/pci:00/:00:1b.0/input/input13 [ 18.176621] input: HDA Intel Mic as /devices/pci:00/:00:1b.0/sound/card0/input14 [ 18.176715] input: HDA Intel Mic as /devices/pci:00/:00:1b.0/sound/card0/input15 [ 18.176793] input: HDA Intel Headphone as /devices/pci:00/:00:1b.0/sound/card0/input16 [ 19.107854] EXT3-fs (dm-1): using internal journal [ 19.327407] loop: module loaded [ 19.819845] Adding 5963772k s
Bug#618809: tmux: faulty adjusting colors
Package: tmux Version: 1.4-5 Severity: minor Tags: squeeze sid tmux does not react correctly of the color changes of ncmpcpp. This happens only in tmux, neither when ncmpcpp is started in a terminal directly nor when started in a screen session -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (1001, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686-bigmem (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages tmux depends on: ii libc62.11.2-11 Embedded GNU C Library: Shared lib ii libevent-1.4-2 1.4.13-stable-1 An asynchronous event notification ii libncurses5 5.7+20100313-5 shared libraries for terminal hand tmux recommends no packages. tmux suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#592383: ssmtp fails to send mail when password contains `$'
Okay, that's embarrassing, I overlooked something. Actually everything is working fine. Sorry about that henry -- http://literaturlatenight.de -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#592383: Subject: ssmtp fails to send mail when password contains `$'
Package: ssmtp Version: 2.64-4 Severity: important Since I changed my password ssmtp fails to send mails. As the only special character within the password is *$' I assume this to be the cause of the failure. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (1001, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages ssmtp depends on: ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libgnutls26 2.8.6-1the GNU TLS library - runtime libr ssmtp recommends no packages. ssmtp suggests no packages. -- Configuration Files: /etc/logcheck/ignore.d.server/ssmtp [Errno 13] Keine Berechtigung: u'/etc/logcheck/ignore.d.server/ssmtp' -- debconf information: ssmtp/hostname: ssmtp/root: postmaster ssmtp/rewritedomain: ssmtp/overwriteconfig: true ssmtp/mailname: ssmtp/port: 25 ssmtp/mailhub: mail ssmtp/fromoverride: false -- http://literaturlatenight.de -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#585534: zsh as login shell breaks parts of gnome-session
On Sa, Jun 12 2010, Josselin Mouette wrote: > Le vendredi 11 juin 2010 à 17:42 +0200, henry atting a écrit : >> > How did you test other window managers? By setting $WINDOW_MANAGER? >> >> Mmh, I did not test them in a gnome-session. To choose I have these >> lines in ~/.xinitirc >> >> case "$1" in >> urxvt) exec /usr/bin/urxvt;; >> dwm) exec /usr/bin/dwm;; >> awe) exec /usr/bin/awesome;; >> gno) exec /usr/bin/gnome-session >> esac >> >> >> > Do you have any relevant output in .xsession-errors? >> >> No, after quitting gnome-session .xsession-errors remains empty. > > Sorry but I can’t reproduce that here. There must be something wrong in > a script of yours. Mmh, I don't see what script, normally I start with startx and an empty .xinitrc. Anyway, as far as I am concerned this bug can be closed, I switched back to awesome again which works flawlessly. Thanks a lot henry -- http://literaturlatenight.de -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#585534: zsh as login shell breaks parts of gnome-session
On Fr, Jun 11 2010, Josselin Mouette wrote: > Le vendredi 11 juin 2010 à 15:27 +0200, henry atting a écrit : >> When zsh used as login shell certain part of a gnome-session won't work. >> All windows are attached to the left upper corner and only a root cursor >> is displayed. >> A test with other window managers eg. awesome revealed that this problem >> solely occurrs with metacity as wm. > > This sounds indeed like metacity not starting; > How did you test other window managers? By setting $WINDOW_MANAGER? Mmh, I did not test them in a gnome-session. To choose I have these lines in ~/.xinitirc case "$1" in urxvt) exec /usr/bin/urxvt;; dwm) exec /usr/bin/dwm;; awe) exec /usr/bin/awesome;; gno) exec /usr/bin/gnome-session esac > Do you have any relevant output in .xsession-errors? No, after quitting gnome-session .xsession-errors remains empty. henry -- http://literaturlatenight.de -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#585534: zsh as login shell breaks parts of gnome-session
Package: gnome-session Version: 2.30.0-1 Severity: important -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gnome-session depends on: ii gnome-panel 2.30.0-1 launcher and docking facility for ii gnome-session-bin 2.30.0-1 The GNOME Session Manager - Minima ii gnome-session-common 2.30.0-1 Common files for the GNOME session ii gnome-settings-daemon 2.30.1-1 daemon handling the GNOME session ii metacity 1:2.30.1-1 lightweight GTK+ window manager ii nautilus 2.30.1-1 file manager and graphical shell f ii policykit-1-gnome 0.96-2 GNOME authentication agent for Pol Versions of packages gnome-session recommends: ii gnome-power-manager 2.30.1-1 power management tool for the GNOM Versions of packages gnome-session suggests: pn desktop-base (no description available) ii gnome-keyring 2.30.1-2 GNOME keyring services (daemon and pn gnome-user-guide (no description available) -- no debconf information Package: gnome-session Version: 2.30.0-1 Severity: important When zsh used as login shell certain part of a gnome-session won't work. All windows are attached to the left upper corner and only a root cursor is displayed. A test with other window managers eg. awesome revealed that this problem solely occurrs with metacity as wm. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gnome-session depends on: ii gnome-panel 2.30.0-1 launcher and docking facility for ii gnome-session-bin 2.30.0-1 The GNOME Session Manager - Minima ii gnome-session-common 2.30.0-1 Common files for the GNOME session ii gnome-settings-daemon 2.30.1-1 daemon handling the GNOME session ii metacity 1:2.30.1-1 lightweight GTK+ window manager ii nautilus 2.30.1-1 file manager and graphical shell f ii policykit-1-gnome 0.96-2 GNOME authentication agent for Pol Versions of packages gnome-session recommends: ii gnome-power-manager 2.30.1-1 power management tool for the GNOM Versions of packages gnome-session suggests: pn desktop-base (no description available) ii gnome-keyring 2.30.1-2 GNOME keyring services (daemon and pn gnome-user-guide (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#577617: openoffice.org-writer (3.2) fails to insert page numbers
Package: openoffice.org-writer Version: 1:3.2.0-4~bpo50+1 Severity: important *** Please type your report below this line *** When I hit -> Insert -> Page Number I only get this error message: BASIC run-time error. Object variable not set So insertig page numbers this way is impossible. -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages openoffice.org-writer depends on: ii libc6 2.7-18lenny2 GNU C Library: Shared libraries ii libgcc1 1:4.3.2-1.1 GCC support library ii libstdc++6 4.3.2-1.1The GNU Standard C++ Library v3 ii libstlport4.6ld 4.6.2-3.2STLport C++ class library ii libwpd8c2a 0.8.14-1 Library for handling WordPerfect d ii libwps-0.1-10.1.2-1 Works text file format import filt ii openoffice.org- 1:3.2.0-4~bpo50+1full-featured office productivity ii openoffice.org- 1:3.2.0-4~bpo50+1full-featured office productivity ii ure 1.6.0+OOo3.2.0-4~bpo50+1 OpenOffice.org UNO runtime environ ii zlib1g 1:1.2.3.3.dfsg-12compression library - runtime Versions of packages openoffice.org-writer recommends: ii default-jre [java5-run 1.5-30Standard Java or Java compatible R ii java-gcj-compat [java5 1.0.78-2 Java runtime environment using GIJ ii openoffice.org-emailme 1:3.2.0-4~bpo50+1 full-featured office productivity ii openoffice.org-filter- 1:3.2.0-4~bpo50+1 full-featured office productivity ii openoffice.org-java-co 1:3.2.0-4~bpo50+1 full-featured office productivity ii openoffice.org-math1:3.2.0-4~bpo50+1 full-featured office productivity Versions of packages openoffice.org-writer suggests: pn openoffice.org-base(no description available) pn openoffice.org-gcj (no description available) Versions of packages openoffice.org-core depends on: ii fontconfig 2.6.0-3 generic font configuration library ii libc6 2.7-18lenny2 GNU C Library: Shared libraries ii libcairo2 1.8.8-2~bpo50+1 The Cairo 2D vector graphics libra ii libcurl37.18.2-8lenny4 Multi-protocol file transfer libra ii libdb4.64.6.21-11Berkeley v4.6 Database Libraries [ ii libexpat1 2.0.1-4+lenny3 XML parsing C library - runtime li ii libfreetype62.3.7-2+lenny1 FreeType 2 font engine, shared lib ii libgcc1 1:4.3.2-1.1 GCC support library ii libglib2.0-02.16.6-3 The GLib library of C routines ii libgraphite31:2.2.1-2.1 SILGraphite - a "smart font" rende ii libgstreamer-pl 0.10.19-2GStreamer libraries from the "base ii libgstreamer0.1 0.10.19-3Core GStreamer libraries and eleme ii libgtk2.0-0 2.12.12-1~lenny1 The GTK+ graphical user interface ii libhunspell-1.2 1.2.6-1 spell checker and morphological an ii libhyphen0 2.4-4ALTLinux hyphenation library - sha ii libice6 2:1.0.4-1X11 Inter-Client Exchange library ii libjpeg62 6b-14The Independent JPEG Group's JPEG ii libneon27-gnutl 0.28.2-6.1 An HTTP and WebDAV client library ii libnspr4-0d 4.7.1-5 NetScape Portable Runtime Library ii libnss3-1d 3.12.3.1-0lenny1 Network Security Service libraries ii libsm6 2:1.0.3-2X11 Session Management library ii libssl0.9.8 0.9.8g-15+lenny6 SSL shared libraries ii libstdc++6 4.3.2-1.1The GNU Standard C++ Library v3 ii libstlport4.6ld 4.6.2-3.2STLport C++ class library ii libx11-62:1.1.5-2X11 client-side library ii libxaw7 2:1.0.4-2X11 Athena Widget library ii libxext62:1.0.4-1X11 miscellaneous extension librar ii libxinerama12:1.0.3-2X11 Xinerama extension library ii libxml2 2.6.32.dfsg-5+lenny1 GNOME XML library ii libxrandr2 2:1.2.3-1X11 RandR extension library ii libxrender1 1:0.9.4-2X Rendering Extension client libra ii libxslt1.1 1.1.24-2 XSLT processing library - runtime ii libxt6 1:1.0.5-3X11 toolkit intrinsics library ii libxtst62:1.0.3-1X11 Testing -- Resource extension ii openoffice.org- 1:3.2.0-4~bpo50+1full-featured office productivity ii ttf-opensymbol 1:3.2.0-4~bpo50+1OpenSymbol TrueType font ii ure 1.6.0+OOo3.2.0-4~bpo50+1 OpenOffice.org UNO runtime environ
Bug#576798: ghc6, no utf-8
On Sa, Apr 10 2010, Joachim Breitner wrote: > Hi Henry, > > Am Donnerstag, den 08.04.2010, 11:33 +0200 schrieb henry atting: >> On Do, Apr 08 2010, Kari Pahula wrote: >> > On Wed, Apr 07, 2010 at 04:31:07PM +0200, henry atting wrote: >> >> BTW, on the hledger website are some older builds to download which are >> >> working fine. >> > >> > Could you please try narrowing down which was the last version that >> > worked correctly for you? It'd help if I had some simple test case >> > for this. It's something more subtle if putStrLn indeed outputs >> > correct UTF-8. >> >> The version which works (downloaded as binary from >> http://hledger.org/binaries/) is: hledger-0.7 with vty >> >> The current version that does not work correctly (installed with `cabal >> install`) is: hledger-0.8 with vty >> >> If I use the simple ncurses ui the euro sign and umlauts are displayed >> correctly. (in both versions) > > I assume that hledger-0.7 is built with ghc-6.10 and that you built 0.8 > with ghc-6.12. > > Without looking at the code, this is what happening most likely: The > hledger code did not actually change. In both instances in transforms > unicode characters into UTF8-encoded byte sequences (still represented > as [Char]), and prints them using "putStrLn". > > ghc-6.10 would print these byte-for-byte, and they turn up correctly on > your computer. > > ghc-6.12 is smarter and transforms them to the local locale, in your > case, UTF8. The effect is what you see: double-encoded UTF8 strings. > > So this is not a bug in ghc, but a bug in hledger that turned up due to > the (thankfully) more sensible behaviour in ghc. > > You need to talk to the hledger maintainer if he already has code that > works with ghc-6.12. Yes, your assumption was absolutely correct. Just yesterday a new version of hledger was announced (0.9)- with GHC 6.12 support. Now regarding the utf-8 problem everything works as it should. Greetings and thanks, henry -- http://literaturlatenight.de -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#576798: ghc6, no utf-8
On Mi, Apr 07 2010, Joachim Breitner wrote: Hi Joachim, > Am Mittwoch, den 07.04.2010, 12:32 +0200 schrieb henry atting: >> Package: ghc6 >> Version: 6.12.1-12 >> Justification: renders package unusable >> Severity: grave >> >> *** Please type your report below this line *** >> >> Utf-8 obviously is not supported. That make some programms installed >> with cabal nearly unusuable. > > please elaborate: What program are you installing, in what way, how does > it fail. > > I built programs with ghc6-6.12 that work much better WRT unicode now. One program that fails is `hledger'. (http://hledger.org/) I installed it with `cabal install hledger'. First it seemingly builds correctly. Then a simple `./hledger' should display my ledger file with accounts and the according totals -- with the euro currency symbol. It should look like this: €4.50 misc But no, the currency symbol is substituted: â¬4.50 misc In ghci: whatareumlauts = "ä, ö and ü" *Main> whatareumlauts "\228, \246 and \252" henry -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#576798: ghc6, no utf-8
Package: ghc6 Version: 6.12.1-12 Justification: renders package unusable Severity: grave *** Please type your report below this line *** Utf-8 obviously is not supported. That make some programms installed with cabal nearly unusuable. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-3-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages ghc6 depends on: ii gcc 4:4.4.2-3 The GNU C compiler ii libbsd-dev0.2.0-1utility functions from BSD systems ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib ii libc6-dev 2.10.2-6 Embedded GNU C Library: Developmen ii libffi-dev3.0.9-1Foreign Function Interface library ii libffi5 3.0.9-1Foreign Function Interface library ii libgmp3-dev 2:4.3.2+dfsg-1 Multiprecision arithmetic library ii libgmp3c2 2:4.3.2+dfsg-1 Multiprecision arithmetic library ii libncurses5 5.7+20100313-1 shared libraries for terminal hand ii perl [perl5] 5.10.1-11 Larry Wall's Practical Extraction ghc6 recommends no packages. Versions of packages ghc6 suggests: pn ghc6-doc (no description available) pn ghc6-prof (no description available) pn haskell-doc(no description available) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#559900: ssmtp update; ssmtp cannot be configured
Package: ssmtp Version: 2.64-1 Severity: important ssmtp cannot be configured after recent update. Richte ssmtp ein (2.64-1) ... /var/lib/dpkg/info/ssmtp.config: Zeile 11: export: `#NO': Ist kein gültiger Bezeichner. dpkg: Fehler beim Bearbeiten von ssmtp (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Fehler traten auf beim Bearbeiten von: ssmtp E: Sub-process /usr/bin/dpkg returned an error code (1) Ein Paket konnte nicht installiert werden. Versuche zu lösen: Richte ssmtp ein (2.64-1) ... /var/lib/dpkg/info/ssmtp.config: Zeile 11: export: `#NO': Ist kein gültiger Bezeichner. dpkg: Fehler beim Bearbeiten von ssmtp (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück Fehler traten auf beim Bearbeiten von: ssmtp -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.30-2-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages ssmtp depends on: ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy ii libc6 2.10.2-2 GNU C Library: Shared libraries ii libgnutls26 2.8.5-2the GNU TLS library - runtime libr ssmtp recommends no packages. ssmtp suggests no packages. -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#557443: iceweasel does not work with privoxy as proxy
Package: iceweasel Version: 3.5.5-1 Severity: important When privoxy used as a proxy - the settings are 127.0.0.1:8118 -, iceweasel is refusing any connection: Iceweasel is configured to use a proxy server that is refusing connections. * Check the proxy settings to make sure that they are correct. Yes, they are, as mentioned above * Contact your network administrator to make sure the proxy server is working. It is working: do! sudo /etc/init.d/privoxy status privoxy is running. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.30-2-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages iceweasel depends on: ii debianutils 3.2.1 Miscellaneous utilities specific t ii fontconfig2.6.0-4generic font configuration library ii libc6 2.10.1-7 GNU C Library: Shared libraries ii libgcc1 1:4.4.1-4 GCC support library ii libglib2.0-0 2.22.2-2 The GLib library of C routines ii libgtk2.0-0 2.18.3-1 The GTK+ graphical user interface ii libnspr4-0d 4.8.2-1NetScape Portable Runtime Library ii libstdc++64.4.1-4The GNU Standard C++ Library v3 ii procps1:3.2.8-2 /proc file system utilities ii psmisc22.8-1 utilities that use the proc file s ii xulrunner-1.9.1 1.9.1.5-1 XUL + XPCOM application runner iceweasel recommends no packages. Versions of packages iceweasel suggests: pn latex-xft-fonts(no description available) ii libkrb531.6.dfsg.4~beta1-5lenny1 MIT Kerberos runtime libraries pn mozplugger (no description available) pn ttf-mathematica(no description available) pn xfonts-mathml (no description available) pn xprint (no description available) pn xulrunner-1.9.1(no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#520739: cups: printing with brother hl-2030 does not work
Package: cups Version: 1.3.8-1lenny4.1 Severity: grave Justification: renders package unusable As of late I cannot print with brother HL-2030 anymore. I assume an upgrade of cups must be the reason for I did not change any setting. The print job stay for some time in the print queue, then disappear and are regarded as completed. The printer is idle, accepting jobs. >From a debian/lenny which uses the same printer in the network, printing is still no problem. Reinstalling the appropriate drivers did not help either. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (991, 'testing'), (500, 'unstable'), (499, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages cups depends on: ii adduser 3.110 add and remove users and groups ii cups-common 1.3.8-1lenny4.1Common UNIX Printing System(tm) - ii debconf [debconf-2.0] 1.5.26 Debian configuration management sy ii ghostscript 8.64~dfsg-1The GPL Ghostscript PostScript/PDF ii libavahi-compat-libdn 0.6.24-2 Avahi Apple Bonjour compatibility ii libc6 2.9-4 GNU C Library: Shared libraries ii libcups2 1.3.8-1lenny4.1Common UNIX Printing System(tm) - ii libcupsimage2 1.3.8-1lenny4.1Common UNIX Printing System(tm) - ii libdbus-1-3 1.2.12-1 simple interprocess messaging syst ii libgnutls26 2.6.4-2the GNU TLS library - runtime libr ii libkrb53 1.6.dfsg.4~beta1-9 Transitional library package/krb4 ii libldap-2.4-2 2.4.11-1 OpenLDAP libraries ii libpam0g 1.0.1-7Pluggable Authentication Modules l ii libpaper1 1.1.23+nmu1library for handling paper charact ii libslp1 1.2.1-7.5 OpenSLP libraries ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip ii perl-modules 5.10.0-19 Core Perl modules ii poppler-utils [xpdf-u 0.8.7-1PDF utilitites (based on libpopple ii procps1:3.2.7-11 /proc file system utilities ii ssl-cert 1.0.23 simple debconf wrapper for OpenSSL Versions of packages cups recommends: pn avahi-utils(no description available) ii cups-client 1.3.8-1lenny4.1 Common UNIX Printing System(tm) - ii foomatic-filters 4.0-20090311-1 OpenPrinting printer support - fil pn smbclient (no description available) Versions of packages cups suggests: ii cups-bsd 1.3.8-1lenny4.1 Common UNIX Printing System(tm) - pn cups-driver-gutenprint (no description available) ii cups-pdf 2.5.0-1 PDF printer for CUPS ii foomatic-db 20090301-2 OpenPrinting printer support - dat ii foomatic-db-engine 4.0-20090301-1 OpenPrinting printer support - pro pn hplip (no description available) pn xpdf-korean | xpdf-japan (no description available) -- debconf information: cupsys/raw-print: true cupsys/backend: ipp, lpd, parallel, scsi, serial, socket, usb, snmp, dnssd -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#506879: [Pkg-alsa-devel] Bug#506879: alsa-utils: alsactl store does not worky
Accidentally I found the culprit: always during the startup of Emacs the PCM settings are changed. The library mpg123.el (an interface for mpg123) did cause this. Don't know why but it anyway is not an alsa bug. Great thanks henry -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#506879: [Pkg-alsa-devel] Bug#506879: alsa-utils: alsactl store does not worky
Zitat - Elimar Riesebieter * Di Dez 02 2008 um 20:05 - > * henry atting [081202 08:50 +0100] >> Zitat - Elimar Riesebieter * Mo Dez 01 2008 um 22:31 - >> >> > * henry atting [081201 20:30 +0100] >> >> Zitat - Elimar Riesebieter * So Nov 30 2008 um 23:26 - >> >> >> >> > * henry atting [081130 20:50 +0100] > [...] >> >> > lsmod | grep snd? >> >> >> >> snd_emu10k1_synth 6816 0 >> >> snd_emu10k1 122720 1 snd_emu10k1_synth >> > >> > What's that? You don't have a soundblaster running. I guess >> > snd_emu10k1 is loaded via /etc/modules ? >> > >> > Elimar >> Yes, it is >> >> do! cat /etc/modules >> >> loop >> sbp2 >> acerhk force_series=290 usedritek=1 verbose=1 poll=0 >> snd_emu10k1_synth >> snd_seq_midi >> vboxdrv >> firewire-sbp2 > > Remove the snd* entries from /etc/modules, reboot, adjust your > mixer, reboot and check whether the mixersettings are changed. Well, I removed the snd* entries but everything remains the same. henry pgpDiXt2Dm8QQ.pgp Description: PGP signature
Bug#506879: [Pkg-alsa-devel] Bug#506879: alsa-utils: alsactl store does not worky
Zitat - Elimar Riesebieter * Mo Dez 01 2008 um 22:31 - > * henry atting [081201 20:30 +0100] >> Zitat - Elimar Riesebieter * So Nov 30 2008 um 23:26 - >> >> > * henry atting [081130 20:50 +0100] >> >> Zitat - Elimar Riesebieter * So Nov 30 2008 um 12:32 - >> > [...] >> >> > # df >> >> > Output >> >> >> >> Dateisystem 1K???Blöcke Benutzt Verfügbar Ben% Eingehängt auf >> >> /dev/mapper/argon-root >> >>6890048 4367216 2172832 67% / >> >> tmpfs 64816012648148 1% /lib/init/rw >> >> udev 1024088 10152 1% /dev >> >> tmpfs 648160 0648160 0% /dev/shm >> >> /dev/hda1 241116 23863204805 11% /boot >> >> /dev/mapper/argon-home >> >> 67106432 17023776 46673760 27% /home >> > >> > There is enough space. >> > >> >> > # cat /proc/asound/cards >> >> > Output >> >> >> >> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 >> >> Intel 82801DB-ICH4 with ALC250 at irq 10 >> >> 1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem >> >> Intel 82801DB-ICH4 Modem at irq 10 >> > >> > We should blacklist or load your modem with prio -2. What tells >> > lsmod | grep snd? >> >> snd_emu10k1_synth 6816 0 >> snd_emu10k1 122720 1 snd_emu10k1_synth > > What's that? You don't have a soundblaster running. I guess > snd_emu10k1 is loaded via /etc/modules ? > > Elimar Yes, it is do! cat /etc/modules loop sbp2 acerhk force_series=290 usedritek=1 verbose=1 poll=0 snd_emu10k1_synth snd_seq_midi vboxdrv firewire-sbp2 henry pgpPzHVLPorXT.pgp Description: PGP signature
Bug#506879: [Pkg-alsa-devel] Bug#506879: alsa-utils: alsactl store does not worky
Zitat - Elimar Riesebieter * So Nov 30 2008 um 23:26 - > * henry atting [081130 20:50 +0100] >> Zitat - Elimar Riesebieter * So Nov 30 2008 um 12:32 - > [...] >> > # df >> > Output >> >> Dateisystem 1K???Blöcke Benutzt Verfügbar Ben% Eingehängt auf >> /dev/mapper/argon-root >>6890048 4367216 2172832 67% / >> tmpfs 64816012648148 1% /lib/init/rw >> udev 1024088 10152 1% /dev >> tmpfs 648160 0648160 0% /dev/shm >> /dev/hda1 241116 23863204805 11% /boot >> /dev/mapper/argon-home >> 67106432 17023776 46673760 27% /home > > There is enough space. > >> > # cat /proc/asound/cards >> > Output >> >> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 >> Intel 82801DB-ICH4 with ALC250 at irq 10 >> 1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem >> Intel 82801DB-ICH4 Modem at irq 10 > > We should blacklist or load your modem with prio -2. What tells > lsmod | grep snd? snd_emu10k1_synth 6816 0 snd_emu10k1 122720 1 snd_emu10k1_synth snd_emux_synth 30560 1 snd_emu10k1_synth snd_seq_virmidi 6720 1 snd_emux_synth snd_seq_midi8064 0 snd_rawmidi22528 3 snd_emu10k1,snd_seq_virmidi,snd_seq_midi snd_seq_midi_emul 5856 1 snd_emux_synth snd_hwdep 8708 2 snd_emu10k1,snd_emux_synth snd_util_mem4544 2 snd_emu10k1,snd_emux_synth snd_intel8x0m 16684 0 snd_pcm_oss37824 0 snd_mixer_oss 14880 1 snd_pcm_oss snd_intel8x0 31740 0 snd_ac97_codec 91300 3 snd_emu10k1,snd_intel8x0m,snd_intel8x0 ac97_bus1952 1 snd_ac97_codec snd_pcm68228 5 snd_emu10k1,snd_intel8x0m,snd_pcm_oss, snd_intel8x0,snd_ac97_codec snd_seq_dummy 3780 0 snd_seq_oss28544 0 firmware_class 9088 3 snd_emu10k1,pcmcia,ipw2200 snd_seq_midi_event 6976 3 snd_seq_virmidi,snd_seq_midi,snd_seq_oss snd_seq45872 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi, snd_seq_midi_emul,snd_seq_dummy, snd_seq_oss,snd_seq_midi_event snd_timer 21320 3 snd_emu10k1,snd_pcm,snd_seq snd_seq_device 7564 8 snd_emu10k1_synth,snd_emu10k1,snd_emux_synth, snd_seq_midi,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq snd48772 15 snd_emu10k1,snd_emux_synth,snd_seq_virmidi,snd_rawmidi, snd_hwdep,snd_intel8x0m,snd_pcm_oss,snd_mixer_oss,snd_intel8x0, snd_ac97_codec,snd_pcm,snd_seq_oss,snd_seq,snd_timer,snd_seq_device soundcore 7488 1 snd snd_page_alloc 9992 4 snd_emu10k1,snd_intel8x0m,snd_intel8x0,snd_pcm >> >> > # rm /var/lib/alsa/asound.state >> > # /etc/init.d/alsa-utils restart >> > # ls -al /var/lib/alsa/asound.state >> > Output >> >> -rw-r--r-- 1 root root 7472 30. Nov 20:45 /var/lib/alsa/asound.state >> >> > Adjust your mixer >> > >> > # alsactl store >> > # ls -al /var/lib/alsa/asound.state >> > Output >> >> -rw-r--r-- 1 root root 7472 30. Nov 20:46 /var/lib/alsa/asound.state >> >> > # /etc/init.d/alsa-utils restart >> > # ls -al /var/lib/alsa/asound.state >> > Output >> >> -rw-r--r-- 1 root root 7472 30. Nov 20:47 /var/lib/alsa/asound.state > > Hmm, we shuold check the diffs... Did sound worked here? Sound basically works, yes. And as far as I can see now the only setting which is not to be stored is the setting for `PCM'. henry pgp0mZtaXFuKS.pgp Description: PGP signature
Bug#506879: [Pkg-alsa-devel] Bug#506879: alsa-utils: alsactl store does not worky
Zitat - Elimar Riesebieter * So Nov 30 2008 um 12:32 - > * henry atting [081130 09:50 +0100] >> Zitat - Elimar Riesebieter * Sa Nov 29 2008 um 13:53 - >> >> > * henry atting [081127 16:10 +0100] > [...] >> >> The result of `alsactl init 0' is: >> >> >> >> alsactl: unknown command 'init' ... > > alsactl init is introduced in alsa-utils 1.0.18. Sorry for the > mismatch. > > [...] >> > Do you have a $HOME/.asondrc ? >> >> No, I have not. > > Could you please do as follows and show us the output? With pleasure... > # df > Output Dateisystem 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf /dev/mapper/argon-root 6890048 4367216 2172832 67% / tmpfs 64816012648148 1% /lib/init/rw udev 1024088 10152 1% /dev tmpfs 648160 0648160 0% /dev/shm /dev/hda1 241116 23863204805 11% /boot /dev/mapper/argon-home 67106432 17023776 46673760 27% /home > # cat /proc/asound/cards > Output 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with ALC250 at irq 10 1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem Intel 82801DB-ICH4 Modem at irq 10 > # rm /var/lib/alsa/asound.state > # /etc/init.d/alsa-utils restart > # ls -al /var/lib/alsa/asound.state > Output -rw-r--r-- 1 root root 7472 30. Nov 20:45 /var/lib/alsa/asound.state > Adjust your mixer > > # alsactl store > # ls -al /var/lib/alsa/asound.state > Output -rw-r--r-- 1 root root 7472 30. Nov 20:46 /var/lib/alsa/asound.state > # /etc/init.d/alsa-utils restart > # ls -al /var/lib/alsa/asound.state > Output -rw-r--r-- 1 root root 7472 30. Nov 20:47 /var/lib/alsa/asound.state > Thanks > Elimar Henry -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#506879: [Pkg-alsa-devel] Bug#506879: alsa-utils: alsactl store does not work
Zitat - Elimar Riesebieter * Sa Nov 29 2008 um 13:53 - > * henry atting [081127 16:10 +0100] >> Zitat - Elimar Riesebieter * Di Nov 25 2008 um 19:29 - >> >> > * henry atting [081125 15:40 +0100] >> >> Package: alsa-utils >> >> Version: 1.0.16-2 >> >> Severity: important >> >> >> >> `alsactl store' (as root) does not store the current alsamixer settings. >> >> After a >> >> restart of the system the PCM control is always at the top level. I have >> >> to adjust it >> >> by hand because `alsactl' does not store my settings. >> > >> > Could you please delete /var/lib/alsa/asound.state and run >> > 'alsactl init 0'. Set your mixer and run 'alsactl store'. >> >> >> The result of `alsactl init 0' is: >> >> alsactl: unknown command 'init' ... >> >> So I simply deleted asound.state and tried to store the alsamixer >> settings. After a reboot or a shutdown and a boot after, mmh, one hour >> everything is preserved. But over night PCM is set again up to 100. > > That sounds realy magic. Try to turn the power plug 180° ;) Mmh, everybody needs a little magic now and then ;) > Do you have a $HOME/.asondrc ? No, I have not. henry -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#506879: Acknowledgement (alsa-utils: alsactl store does not work)
The result of `alsactl init 0' is: alsactl: unknown command 'init' ... So I simply deleted asound.state and tried to store the alsamixer settings. After a reboot or a shutdown and a boot after, mmh, one hour everything is preserved. But over night PCM is set again up to 100. henry -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#506879: alsa-utils: alsactl store does not work
Package: alsa-utils Version: 1.0.16-2 Severity: important `alsactl store' (as root) does not store the current alsamixer settings. After a restart of the system the PCM control is always at the top level. I have to adjust it by hand because `alsactl' does not store my settings. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (991, 'testing'), (500, 'unstable'), (499, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages alsa-utils depends on: ii dialog1.1-20080316-1 Displays user-friendly dialog boxe ii libasound21.0.16-2 ALSA library ii libc6 2.7-16 GNU C Library: Shared libraries ii libncurses5 5.6+20080830-1 shared libraries for terminal hand ii linux-sound-base 1.0.17.dfsg-4 base package for ALSA and OSS soun ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip ii module-init-tools 3.4-1 tools for managing Linux kernel mo ii pciutils 1:3.0.0-6 Linux PCI Utilities ii python2.5.2-3An interactive high-level object-o ii whiptail 0.52.2-11.3Displays user-friendly dialog boxe Versions of packages alsa-utils recommends: ii alsa-base 1.0.17.dfsg-4 ALSA driver configuration files alsa-utils suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#498772: scribus-ng: fails to create pdf/x-3 (CMYK) without colour bars
Package: scribus-ng Version: 1.3.5.dfsg~svn20080717-1 Severity: important Scribus does not create a pdf/x-3 with an CMYK colour profile when the checkbox for colour bars is not activated. Without colour bars only pdf/x-3 with an RGB profile is possible. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (991, 'testing'), (500, 'unstable'), (499, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages scribus-ng depends on: ii ghostscript8.62.dfsg.1-3.1 The GPL Ghostscript PostScript/PDF ii ghostscript-x [gs-gpl] 8.62.dfsg.1-3.1 The GPL Ghostscript PostScript/PDF ii libaspell150.60.6-1 GNU Aspell spell-checker runtime l ii libc6 2.7-13GNU C Library: Shared libraries ii libcairo2 1.6.4-6 The Cairo 2D vector graphics libra ii libcups2 1.3.8-1lenny1 Common UNIX Printing System(tm) - ii libfontconfig1 2.6.0-1 generic font configuration library ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libgcc11:4.3.1-9 GCC support library ii libjpeg62 6b-14 The Independent JPEG Group's JPEG ii liblcms1 1.17.dfsg-1 Color management library ii libqt4-network 4.4.0-4 Qt 4 network module ii libqt4-xml 4.4.0-4 Qt 4 XML module ii libqtcore4 4.4.0-4 Qt 4 core module ii libqtgui4 4.4.0-4 Qt 4 GUI module ii libstdc++6 4.3.1-9 The GNU Standard C++ Library v3 ii libtiff4 3.8.2-11 Tag Image File Format (TIFF) libra ii libx11-6 2:1.1.4-2 X11 client-side library ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxml22.6.32.dfsg-3 GNOME XML library ii python 2.5.2-2 An interactive high-level object-o ii python-tk 2.5.2-1 Tkinter - Writing Tk applications ii python2.5 2.5.2-11 An interactive high-level object-o ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages scribus-ng recommends: ii cups-bsd [cupsys-bsd] 1.3.8-1lenny1 Common UNIX Printing System(tm) - ii cupsys-bsd 1.3.8-1lenny1 Common UNIX Printing System (trans ii gsfonts-x110.21 Make Ghostscript fonts available t ii icc-profiles 1.0.1-4 ICC color profiles for use with Sc ii xfonts-scalable1:1.0.0-6 scalable fonts for X Versions of packages scribus-ng suggests: pn scribus-template (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#488240: Acknowledgement (anacron deferred)
Please ignore, it turned out to be a kernel bug. Regards, henry -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#488240: anacron deferred
Package: anacron Version: 2.3-13.1 Severity: grave Justification: renders package unusable Anacron starts with this message: deferred while on battery power while the laptop is not run on battery -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (991, 'testing'), (500, 'unstable'), (500, 'stable'), (499, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages anacron depends on: ii debianutils 2.28.4 Miscellaneous utilities specific t ii libc6 2.7-12 GNU C Library: Shared libraries ii lsb-base 3.2-12 Linux Standard Base 3.2 init scrip Versions of packages anacron recommends: ii cron 3.0pl1-104 management of regular background p ii postfix [mail-transport-agent 2.5.2-1High-performance mail transport ag ii sysklogd [system-log-daemon] 1.5-4 System Logging Daemon -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#480276:
Brice Goglin wrote: > henry atting wrote: >> To create a new ~/.Xmodmap with `xmodmap -pke' did fix the problem. >> > > Did you save the old .Xmodmap? What's the difference between the new one > and the old one? The only change I made myself was the elimination of Caps_lock --8<---cut here---start->8--- *** /home/atting/.Xmodmap 2008-05-09 17:10:16.0 +0200 --- /home/atting/Xmodmap_bak2008-05-09 17:03:55.0 +0200 *** *** 1,3 --- 1,4 + clear Lock keycode 8 = keycode 9 = Escape keycode 10 = 1 exclam onesuperior exclamdown onesuperior exclamdown *** *** 10,17 keycode 17 = 8 parenleft bracketleft trademark bracketleft trademark keycode 18 = 9 parenright bracketright plusminus bracketright plusminus keycode 19 = 0 equal braceright degree braceright degree ! keycode 20 = ssharp question backslash questiondown backslash questiondown U1E9E ! keycode 21 = apostrophe grave cedilla cedilla cedilla cedilla keycode 22 = BackSpace Terminate_Server keycode 23 = Tab ISO_Left_Tab keycode 24 = q Q at Greek_OMEGA at Greek_OMEGA --- 11,18 keycode 17 = 8 parenleft bracketleft trademark bracketleft trademark keycode 18 = 9 parenright bracketright plusminus bracketright plusminus keycode 19 = 0 equal braceright degree braceright degree ! keycode 20 = ssharp question backslash questiondown backslash questiondown ! keycode 21 = acute grave cedilla cedilla cedilla cedilla keycode 22 = BackSpace Terminate_Server keycode 23 = Tab ISO_Left_Tab keycode 24 = q Q at Greek_OMEGA at Greek_OMEGA *** *** 23,29 keycode 30 = u U downarrow uparrow downarrow uparrow keycode 31 = i I rightarrow idotless rightarrow idotless keycode 32 = o O oslash Oslash oslash Oslash ! keycode 33 = p P thorn THORN thorn THORN keycode 34 = udiaeresis Udiaeresis diaeresis diaeresis diaeresis diaeresis keycode 35 = plus asterisk asciitilde macron asciitilde macron keycode 36 = Return --- 24,30 keycode 30 = u U downarrow uparrow downarrow uparrow keycode 31 = i I rightarrow idotless rightarrow idotless keycode 32 = o O oslash Oslash oslash Oslash ! keycode 33 = p P p P p P keycode 34 = udiaeresis Udiaeresis diaeresis diaeresis diaeresis diaeresis keycode 35 = plus asterisk asciitilde macron asciitilde macron keycode 36 = Return *** *** 56,62 keycode 63 = KP_Multiply XF86_ClearGrab keycode 64 = Alt_L Meta_L keycode 65 = space ! keycode 66 = Caps_Lock keycode 67 = F1 XF86_Switch_VT_1 keycode 68 = F2 XF86_Switch_VT_2 keycode 69 = F3 XF86_Switch_VT_3 --- 57,63 keycode 63 = KP_Multiply XF86_ClearGrab keycode 64 = Alt_L Meta_L keycode 65 = space ! keycode 66 = keycode 67 = F1 XF86_Switch_VT_1 keycode 68 = F2 XF86_Switch_VT_2 keycode 69 = F3 XF86_Switch_VT_3 *** *** 204,210 keycode 211 = keycode 212 = keycode 213 = ! keycode 214 = XF86Display keycode 215 = keycode 216 = keycode 217 = --- 205,211 keycode 211 = keycode 212 = keycode 213 = ! keycode 214 = keycode 215 = keycode 216 = keycode 217 = --8<---cut here---end--->8--- > Do you consider this problem as a regression? Or did you use a > non-regular syntax in your old .Xmodmap that happened to work with older > X packages by chance and don't anymore with recent packages? Mmh, I don't know what exactly caused this problem. I do modify now the Capslock key in xorg.conf with Option "XkbOptions""compose:caps" This is even better than modifying it via ~/.Xmodmap. So as far as I am concerned it's a change for the better. henry pgphCQdzMu5vL.pgp Description: PGP signature
Bug#480276:
To create a new ~/.Xmodmap with `xmodmap -pke' did fix the problem. Cheers, henry -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#480276: xserver-xorg: After the last upgrade the right ALT key does not work
Package: xserver-xorg Version: 1:7.3+10 Severity: important As mentioned in the subject since the last upgrade (05/09) the right ALT doesn't work anymore. -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 12. Okt 2007 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1674940 29. Apr 20:37 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 01:00.0 VGA compatible controller: ATI Technologies Inc M9+ 5C61 [Radeon Mobility 9200 (AGP)] (rev 01) /etc/X11/xorg.conf unchanged from checksum in /var/lib/x11/xorg.conf.md5sum. Xorg X server configuration file status: -rw-r--r-- 1 root root 1199 9. Mai 08:26 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant""nodeadkeys" Option "XkbOptions""lv3:ralt_switch,compose:caps" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "Emulate3Buttons" "true" EndSection Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 43171 9. Mai 10:57 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.4.0.90 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.1~git20080131-4) Current Operating System: Linux argon 2.6.22-2-686 #1 SMP Fri Aug 31 00:24:01 UTC 2007 i686 Build Date: 29 April 2008 08:24:00PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 9 10:57:01 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Configured Video Device" (==) |-->Input Device "Configured Mouse" (==) |-->Input Device "Generic Keyboard" (==) The core pointer device wasn't specified explicitly in the layout. Using the first mouse device. (==) The core keyboard device wasn't specified explicitly in the layout. Using the first keyboard device. (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81d9220 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput
Bug#478216: powersaved: on acer travelmate 291: ´powersave -m´ leads to this error message: Standby is not supported
Package: powersaved Version: 0.15.20-2 Severity: important Since an upgrade standby does not work anymore -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (991, 'testing'), (500, 'gutsy'), (500, 'unstable'), (499, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages powersaved depends on: ii adduser 3.107 add and remove users and groups ii dbus 1.2.1-1simple interprocess messaging syst ii hal 0.5.10-2 Hardware Abstraction Layer ii libc6 2.7-10 GNU C Library: Shared libraries ii libdbus-1-3 1.2.1-1simple interprocess messaging syst ii libdbus-glib-1-2 0.74-2 simple interprocess messaging syst ii libgcc1 1:4.3.0-3 GCC support library ii libglib2.0-0 2.16.1-2 The GLib library of C routines ii liblazy1 0.2-4 convenience functions for D-Bus, H ii libpowersave110.15.20-2 power management daemon - shared l ii libstdc++64.3.0-3The GNU Standard C++ Library v3 ii lsb-base 3.1-24 Linux Standard Base 3.1 init scrip Versions of packages powersaved recommends: ii acpid 1.0.4-7.1 Utilities for using ACPI power man ii cpufrequtils 002-7.2utilities to deal with the cpufreq -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#465044: the whole system freezes when clicking on a link in pidgin
Package: pidgin Version: 2.3.1-2 Severity: critical Justification: breaks the whole system When in a Chat Window clicking on a link sent from a user the whole system crashes -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (991, 'testing'), (500, 'gutsy'), (500, 'unstable'), (499, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages pidgin depends on: ii gconf2 2.20.1-2+b1 GNOME configuration database syste ii libatk1.0-0 1.20.0-1 The ATK accessibility toolkit ii libc6 2.7-6GNU C Library: Shared libraries ii libcairo2 1.4.14-1 The Cairo 2D vector graphics libra ii libdbus-1-3 1.1.2-1 simple interprocess messaging syst ii libdbus-glib-1-20.74-1 simple interprocess messaging syst ii libglib2.0-02.14.5-2 The GLib library of C routines ii libgstreamer0.10-0 0.10.15-4Core GStreamer libraries and eleme ii libgtk2.0-0 2.12.5-2 The GTK+ graphical user interface ii libgtkspell02.0.10-4 a spell-checking addon for GTK's T ii libice6 2:1.0.4-1X11 Inter-Client Exchange library ii libpango1.0-0 1.18.4-1 Layout and rendering of internatio ii libpurple0 2.3.1-2 multi-protocol instant messaging l ii libsm6 2:1.0.3-1+b1 X11 Session Management library ii libstartup-notification00.9-1library for program launch feedbac ii libx11-62:1.0.3-7X11 client-side library ii libxss1 1:1.1.2-1X11 Screen Saver extension library ii pidgin-data 2.3.1-2 multi-protocol instant messaging c Versions of packages pidgin recommends: ii gstreamer0.10-plugins-base0.10.15-4 GStreamer plugins from the "base" ii gstreamer0.10-plugins-good0.10.6-4 GStreamer plugins from the "good" -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]