Bug#897975: gdm3: System fails to boot due to GDM restarting constantly.
Hi, I'm having the same issue and removing the. ICEAuthority* files fixed the issue here as well. Thank you for the fix Philipp . On Mon, 07 May 2018 11:08:14 +0200 Philipp Falk wrote: > Package: gdm3 > Version: 3.22.3-3+deb9u1 > Severity: wishlist > > Dear Maintainer, > > I just wanted to confirm that I also encountered this bug on a debian > stable installation. > > I also see the "ICELockAuthFile fail: Already exists" message in > the systemd journal. > > Removing /var/lib/gdm3/.ICEAuthority* and restarting > gdm.service fixed the issue temporarily until the next reboot. > > If wayland is enabled via /etc/gdm3/daemon.conf, gdm3 comes up after > some waiting time (around two minutes) on a cold boot. > > -- System Information: > Debian Release: 9.4 > Architecture: amd64 (x86_64) > > Kernel: Linux 4.9.0-6-amd64 > Shell: /bin/sh linked to /bin/dash > Init: systemd (via /run/systemd/system) > > Versions of packages gdm3 depends on: > ii accountsservice 0.6.43-1 > ii adduser 3.115 > ii awesome [x-window-manager]4.0-1 > ii dconf-cli 0.26.0-2+b1 > ii dconf-gsettings-backend 0.26.0-2+b1 > ii debconf [debconf-2.0] 1.5.61 > ii fluxbox [x-window-manager]1.3.5-2+b2 > ii fvwm [x-window-manager] 1:2.6.7-3 > ii gir1.2-gdm-1.03.22.3-3+deb9u1 > ii gnome-session [x-session-manager] 3.22.3-1 > ii gnome-session-bin 3.22.3-1 > ii gnome-settings-daemon 3.22.2-2+deb9u2 > ii gnome-shell 3.22.3-3 > ii gnome-terminal [x-terminal-emulator] 3.22.2-1 > ii gsettings-desktop-schemas 3.22.0-1 > ii icewm [x-window-manager] 1.3.8+mod+20161220-1 > ii libaccountsservice0 0.6.43-1 > ii libaudit1 1:2.6.7-2 > ii libc6 2.24-11+deb9u3 > ii libcanberra-gtk3-00.30-3 > ii libcanberra0 0.30-3 > ii libgdk-pixbuf2.0-02.36.5-2+deb9u2 > ii libgdm1 3.22.3-3+deb9u1 > ii libglib2.0-0 2.50.3-2 > ii libglib2.0-bin2.50.3-2 > ii libgtk-3-03.22.11-1 > ii libkeyutils1 1.5.9-9 > ii libpam-modules1.1.8-3.6 > ii libpam-runtime1.1.8-3.6 > ii libpam-systemd232-25+deb9u2 > ii libpam0g 1.1.8-3.6 > ii librsvg2-common 2.40.16-1+b1 > ii libselinux1 2.6-3+b3 Sent from my Huawei Mobile
Bug#877990: grub-probe: error: cannot find a device for {/|/boot|/boot/grub} (is /dev mounted?).
Package: fai-server Version: 5.4 Severity: important Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? Running fai-setup -v from a clean ans up-2-date Debian stretch install, following the commands in https://fai-project.org/fai-guide/#_a_id_setup_a_setup_your_faiserver (including copying the simple config). * What exactly did you do (or not do) that was effective (or ineffective)? Nothing. I just got this errors: grub-probe: error: cannot find a device for / (is /dev mounted?). grub-probe: error: cannot find a device for /boot (is /dev mounted?). grub-probe: error: cannot find a device for /boot/grub (is /dev mounted?). * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these template lines *** -- System Information: Debian Release: 9.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages fai-server depends on: ii debootstrap 1.0.89 ii fai-client 5.4 ii xz-utils 5.2.2-1.2+b1 Versions of packages fai-server recommends: ii isc-dhcp-server 4.3.5-3 ii libproc-daemon-perl 0.23-1 ii nfs-kernel-server 1:1.3.4-2.1 ii openbsd-inetd [inet-superserver] 0.20160825-2 ii openssh-client1:7.4p1-10+deb9u1 ii openssh-server1:7.4p1-10+deb9u1 ii tftpd-hpa 5.2+20150808-1+b1 Versions of packages fai-server suggests: ii aptitude 0.8.7-1 ii binutils 2.28-5 pn debmirror pn fai-setup-storage pn grub2 pn perl-tk pn qemu-utils ii reprepro 5.1.1-1 ii squashfs-tools 1:4.3-3+deb9u1 ii xorriso1.4.6-1+b1 -- Configuration Files: /etc/fai/apt/sources.list changed: deb http://deb.debian.org/debian stretch main contrib non-free deb http://deb.debian.org/debian-security stretch/updates main contrib non-free deb [trusted=yes] http://fai-project.org/download stretch koeln -- no debconf information
Bug#877988: dracut-install: ERROR: installing '/etc/ssl/certs/ca-certificates.crt'
Package: fai-server Version: 5.4 Severity: important Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? Running fai-setup -v from a clean and up-2-date Debian stretch install, following the commands in https://fai-project.org/fai-guide/#_a_id_setup_a_setup_your_faiserver (including copying the simple config). * What exactly did you do (or not do) that was effective (or ineffective)? Nothing special. I just got this error. One note: I saw in /usr/sbin/fai-make-nfsroot (line 468): if [ -n "$(apt-key list | grep 074BCDE4)" ]; then This does not match the key and should be at least: if [ -n "$(apt-key list | grep '074B CDE4')" ]; then But this patch did not fix the ca-certificates.crt issue. * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these template lines *** -- System Information: Debian Release: 9.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages fai-server depends on: ii debootstrap 1.0.89 ii fai-client 5.4 ii xz-utils 5.2.2-1.2+b1 Versions of packages fai-server recommends: ii isc-dhcp-server 4.3.5-3 ii libproc-daemon-perl 0.23-1 ii nfs-kernel-server 1:1.3.4-2.1 ii openbsd-inetd [inet-superserver] 0.20160825-2 ii openssh-client1:7.4p1-10+deb9u1 ii openssh-server1:7.4p1-10+deb9u1 ii tftpd-hpa 5.2+20150808-1+b1 Versions of packages fai-server suggests: ii aptitude 0.8.7-1 ii binutils 2.28-5 pn debmirror pn fai-setup-storage pn grub2 pn perl-tk pn qemu-utils ii reprepro 5.1.1-1 ii squashfs-tools 1:4.3-3+deb9u1 ii xorriso1.4.6-1+b1 -- Configuration Files: /etc/fai/apt/sources.list changed: deb http://deb.debian.org/debian stretch main contrib non-free deb http://deb.debian.org/debian-security stretch/updates main contrib non-free deb [trusted=yes] http://fai-project.org/download stretch koeln -- no debconf information
Bug#876479: tilix fails to start up, conflicting dependencies on libphobos with libgtkd-3-0
Package: tilix Version: 1.6.4-1+b1 Followup-For: Bug #876479 Dear Maintainer, I can confirm this bug for my installation orosales@osro-laptop:~$ tilix Fatal Error while loading '/usr/lib/x86_64-linux-gnu/libdruntime-ldc.so.72': The module 'core.atomic' is already defined in '/usr/lib/x86_64-linux- gnu/libdruntime-ldc.so.74'. -- System Information: Debian Release: buster/sid APT prefers unstable APT policy: (990, 'unstable'), (900, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.12.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages tilix depends on: ii dconf-gsettings-backend [gsettings-backend] 0.26.0-2+b1 ii libc62.24-17 ii libgtkd-3-0 3.6.5-2 ii libphobos2-ldc74 1:1.4.0-1 ii libvted-3-0 3.6.5-2 ii libx11-6 2:1.6.4-3 ii tilix-common 1.6.4-1 tilix recommends no packages. tilix suggests no packages. -- no debconf information
Bug#869551:
I changed my username from none to noscar and screen works indeed perfectly well. I can therefore confirm that incompatibility with the username none. I'm also surprised that choosing such a username would introduce similar malfunctionings. As for me, I don't think I need to stick with none as a username - I will find something else. Rather, I'm very glad someone was able to exactly pinpoint the bug in such a very short time span. (I couldn't reply earlier by the way, we were moving to another house yesterday. :-)
Bug#869551: strace and gdb logs
This is the output (stderr for strace) I received from running screen with strace and gdb. I will leave strace logs as an attachment, hoping that is possible. This is, instead, what I get when running screen with gdb (I do not have debugging symbols for screen): (gdb) run > Starting program: /usr/bin/screen > > Program received signal SIGHUP, Hangup. > 0x7727f1d0 in __pause_nocancel () at > ../sysdeps/unix/syscall-template.S:84 > 84../sysdeps/unix/syscall-template.S: No such file or directory. > (gdb) > Hope that helps, Oscar strace.err Description: Binary data
Bug#869551: screen: GNU screen returns immediately after being started, without reporting errors
Package: screen Version: 4.5.1-4 Severity: grave Justification: renders package unusable Dear Maintainer, I've been having issues with screen since the day I upgraded my OS to Debian 9.0 with the testing distribution. I can use it with the root account, but when entering "screen" in the console while being logged in as an ordinary user, screen returns immediately. The $? variable invariably contains 0, and no errors are reported on console. We already discussed this problem briefly through e-mail, and I noted I had opened a thread on SuperUser (https://superuser.com/q/1223015/539790) several weeks ago. I have trobleshooted a little using strace and gdb, and will perhaps paste their logs in the follow up replies to this message. -- System Information: Debian Release: buster/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.9.0-3-amd64 (SMP w/8 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages screen depends on: ii libc6 2.24-12 ii libpam0g 1.1.8-3.6 ii libtinfo5 6.0+20161126-1 ii libutempter0 1.1.6-3 screen recommends no packages. Versions of packages screen suggests: ii byobu 5.112-1 ii iselect 1.4.0-2+b2 ii ncurses-term 6.0+20170715-2 -- Configuration Files: /etc/screenrc changed [not included] -- no debconf information
Bug#821114:
Last update: Wed. Dec, 21, 00:56:49 2016
Bug#832459: freemind: new upstream version available
Package: freemind Version: 0.9.0+dfsg2-1 Severity: normal Dear Maintainer, Latest stable version of Freemind is 1.0.1 since 2014 (latest dev snapshot dates from February 2015). Current debian version (0.9.0) dates back to 2011, and it's missing some features included in the latest stable version. Please update at least to the latest stable version. Thank you. -- Package-specific info: [debug] /usr/bin/freemind: Found JAVA_HOME = '/usr/lib/jvm/java-8-openjdk-amd64' [debug] /usr/bin/freemind: Found JAVA_CMD = '/usr/lib/jvm/java-8-openjdk-amd64/bin/java' DEBUG: Freemind parameters are ''. DEBUG: Linux sphinx.debianfans 4.6.0-1-amd64 #1 SMP Debian 4.6.4-1 (2016-07-18) x86_64 GNU/Linux No LSB modules are available. DEBUG: Distributor ID:Debian Description:Debian GNU/Linux unstable (sid) Release:unstable Codename: sid DEBUG: The following DEB packages are installed: ii freemind0.9.0+dfsg2-1 allJava Program for creating and viewing Mindmaps ii freemind-doc0.9.0+dfsg2-1 all Documentation for FreeMind DEBUG: Link '/usr/bin/freemind' resolved to '/usr/share/freemind/freemind.sh'. DEBUG: Freemind Directory is '/usr/share/freemind'. DEBUG: Creating directory ~/.freemind. DEBUG: Copying patterns.xml to ~/.freemind. DEBUG: Calling: '/usr/lib/jvm/java-8-openjdk-amd64/bin/java -Dgnu.java.awt.peer.gtk.Graphics=Graphics2D -Dfreemind.base.dir=/usr/share/freemind -cp ::/usr/share/freemind/lib/freemind.jar:/usr/share/java/SimplyHTML.jar:/usr/share/java/gnu-regexp.jar:/usr/share/java/jibx-run-1.1.6a.jar:/usr/share/java/xpp3.jar:/usr/share/freemind/lib/bindings.jar:/usr/share/java/forms.jar:/usr/share/freemind freemind.main.FreeMindStarter '. -- System Information: Debian Release: stretch/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386, armhf Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=es_CO.UTF-8, LC_CTYPE=es_CO.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to es_CO.UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages freemind depends on: ii default-jre 2:1.8-57 ii libjgoodies-forms-java 1.6.0-4 ii libjibx1.1-java 1.1.6a-4 ii simplyhtml 0.16.17-1 Versions of packages freemind recommends: ii freemind-doc 0.9.0+dfsg2-1 ii java-wrappers 0.1.28 ii xdg-utils 1.1.1-1 Versions of packages freemind suggests: pn freemind-browser pn freemind-plugins-help pn freemind-plugins-script pn freemind-plugins-svg -- no debconf information
Bug#806789: isc-dhcp-client doesn't work with infiniband device
Package: isc-dhcp-client Version: 4.3.1-6 Severity: normal The isc-dhcp-client doesn't recognize infiniband devices as a type supported to use it on a dhcp request. I think this behavior was reported in ticket #786350 (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=786350) but it doesn't have an answer yet. As an example, I attach the output of a dhcp request over a ib0 device. $ dhclient -v ib0 Internet Systems Consortium DHCP Client 4.3.1 Copyright 2004-2014 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Unsupported device type 32 for "ib0" If you think you have received this message due to a bug rather than a configuration issue please read the section on submitting bugs on either our web page at www.isc.org or in the README file before submitting a bug. These pages explain the proper process and the information we find helpful for debugging.. exiting. Thanks, Oscar Lozano -- System Information: Debian Release: 8.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages isc-dhcp-client depends on: ii debianutils 4.4+b1 ii iproute2 3.16.0-2 ii isc-dhcp-common 4.3.1-6 ii libc6 2.19-18+deb8u1 ii libdns-export100 1:9.9.5.dfsg-9+deb8u3 ii libirs-export91 1:9.9.5.dfsg-9+deb8u3 ii libisc-export95 1:9.9.5.dfsg-9+deb8u3 isc-dhcp-client recommends no packages. Versions of packages isc-dhcp-client suggests: pn avahi-autoipd pn resolvconf -- no debconf information
Bug#804914: Acknowledgement (mirror listing update for ftp.utexas.edu)
Nevermind. It appears the sponsor information was required. Once I included that information, the form was submitted properly. Oscar Ricardo Silva ITS - Networking and Telecom Services The University of Texas at Austin On 11/12/2015 03:21 PM, Debian Bug Tracking System wrote: Thank you for filing a new Bug report with Debian. This is an automatically generated reply to let you know your message has been received. Your message is being forwarded to the package maintainers and other interested parties for their attention; they will reply in due course. Your message has been sent to the package maintainer(s): Debian Mirrors Team <mirr...@debian.org> If you wish to submit further information on this problem, please send it to 804...@bugs.debian.org. Please do not send mail to ow...@bugs.debian.org unless you wish to report a problem with the Bug-tracking system.
Bug#762132: Solved
On Sat, 1 Aug 2015 13:48:54 +0200 Harald bugrep...@gehirnspen.de wrote: Dear all, installing fglrx-driver 15-7.1 solved the issue for me. Thanks for sharing my sorrow. Harald Can anyone please how to install fglrx-driver 15-7.1 in Jessie step y step? Thanks
Bug#792040: [PATCH] Allow seconds in -t option
The man page and POSIX standards dictate that this option should allow appending seconds to the -t argument. Drop the code that drops seconds to support this. --- at.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/at.c b/at.c index 5f5038d..47a80f7 100644 --- a/at.c +++ b/at.c @@ -857,8 +857,6 @@ main(int argc, char **argv) fprintf(stderr, invalid date format: %s\n, optarg); exit(EXIT_FAILURE); } -/* drop seconds */ -timer -= timer % 60; break; default: -- 2.4.2 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#729299: Same Problem Here
I use a production machine on Debian and i can't send a mail without having to open GMail after several crashes. This is what i got from evolution. Same trouble with libgglib-2.0-0 aoryu@LOCALFROST:/$ sudo cat /var/log/messages | grep evolution Jun 30 17:10:53 LOCALFROST org.gnome.evolution.dataserver.Sources3[1483]: ** (evolution-source-registry:9030): WARNING **: secret_service_search_sync: must specify at least one attribute to match Jun 30 17:29:40 LOCALFROST kernel: [ 8556.073277] evolution[11609]: segfault at 15 ip 7fcc91edfb00 sp 7fcbebffeb60 error 4 in libglib-2.0.so.0.4200.1[7fcc91e7a000+10c000] Jun 30 17:30:14 LOCALFROST kernel: [ 8590.513121] evolution[11622]: segfault at 1 ip 7f325eabf8b2 sp 7ffcdb72e830 error 4 in libgobject-2.0.so.0.4200.1[7f325eaaa000+51000] Jun 30 18:47:25 LOCALFROST org.gnome.evolution.dataserver.Sources3[1483]: (evolution-source-registry:9030): GLib-GIO-CRITICAL **: g_dbus_interface_skeleton_unexport: assertion 'interface_-priv-connections != NULL' failed Jul 1 10:15:58 LOCALFROST org.gnome.evolution.dataserver.Sources3[1420]: ** (evolution-source-registry:3371): WARNING **: secret_service_search_sync: must specify at least one attribute to match Jul 1 10:46:13 LOCALFROST kernel: [ 7462.200167] evolution[3363]: segfault at 1 ip 7f42acebc8b2 sp 7fff34017ec0 error 4 in libgobject-2.0.so.0.4200.1[7f42acea7000+51000] Jul 1 10:47:08 LOCALFROST kernel: [ 7517.597968] evolution[8477]: segfault at 3 ip 7fe8ec974d00 sp 7ffdb5b45970 error 4 in libgtk-3.so.0.1400.5[7fe8ec699000+6a6000] Jul 1 15:40:17 LOCALFROST kernel: [ 4965.087537] evolution[3240]: segfault at 1 ip 7f8165f808b2 sp 7fff34a84040 error 4 in libgobject-2.0.so.0.4200.1[7f8165f6b000+51000] Jul 1 16:06:50 LOCALFROST org.gnome.evolution.dataserver.Sources3[1477]: ** (evolution-source-registry:3248): WARNING **: secret_service_search_sync: must specify at least one attribute to match Jul 2 09:29:13 LOCALFROST kernel: [16118.126108] evolution[4293]: segfault at 2 ip 7fbe941f56b5 sp 7ffe579634c0 error 4 in libglib-2.0.so.0.4200.1[7fbe9418f000+10c000] Jul 2 13:46:30 LOCALFROST org.gnome.evolution.dataserver.Sources3[1149]: ** (evolution-source-registry:3208): WARNING **: secret_service_search_sync: must specify at least one attribute to match Jul 2 14:31:50 LOCALFROST kernel: [ 7081.988928] evolution[12216]: segfault at 15 ip 7fdc36723b00 sp 7fdb94f72b60 error 4 in libglib-2.0.so.0.4200.1[7fdc366be000+10c000] Jul 2 15:34:39 LOCALFROST kernel: [10854.068165] evolution[19007]: segfault at 15 ip 7fd7603acb00 sp 7fd6b3ffeb60 error 4 in libglib-2.0.so.0.4200.1[7fd760347000+10c000] Jul 2 15:35:11 LOCALFROST kernel: [10886.099140] evolution[19016]: segfault at 1 ip 7fd3eb46a8b2 sp 7ffc27700820 error 4 in libgobject-2.0.so.0.4200.1[7fd3eb455000+51000] Jul 2 15:54:11 LOCALFROST org.gnome.evolution.dataserver.Sources3[1149]: ** Failed to load key file at 'file:///home/aoryu/.config/evolution/sources': El archivo debe tener una extensión «.source» Jul 2 15:54:56 LOCALFROST org.gnome.evolution.dataserver.Sources3[1149]: (evolution-source-registry:3208): module-cache-reaper-WARNING **: Failed to move '/home/aoryu/.cache/evolution/mail/1435862906.20883.2@LOCALFROST': Error al mover el archivo: No existe el fichero o el directorio Jul 2 16:08:55 LOCALFROST kernel: [12911.395681] evolution[21571]: segfault at 19 ip 7ff1aa68476c sp 7ff116ffcb10 error 4 in libglib-2.0.so.0.4200.1[7ff1aa61f000+10c000] Jul 2 16:09:38 LOCALFROST kernel: [12954.359254] evolution[21706]: segfault at 15 ip 7f46e9c39b00 sp 7f46567fbb60 error 4 in libglib-2.0.so.0.4200.1[7f46e9bd4000+10c000] Thanks for any response.
Bug#789581: ZoneComputer1304
-Mensaje original- De: Guillem Jover [mailto:guil...@debian.org] Enviado el: lunes, 22 de junio de 2015 12:34 Para: sub...@bugs.debian.org Asunto: Bug#789581: devscripts: debuild can be made a thin wrapper over dpkg-buildpackage again Package: devscripts Version: 2.15.5 Severity: wishlist Hi! As discussed in the past (although I'm afraid I don't have pointers handy), it would be nice to make debuild a thin wrapper over dpkg-buildpackage, now that the main blocker (shell hooks support) has been implemented in the latter. If there's anything else that would block this, I'll gladly consider adding it to dpkg-buildpackage! Just filing this so that it does not get forgotten. :) Thanks, Guillem -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#738704: sid: pacemaker-hearbeat crash with libhbclient.so.1.0.0
Package: pacemaker Version: 1.1.10+git20130802-4.1 Severity: important I've installed a cluster stack relaying on Pacemaker+Heartbeat on Debian/sid. Once I configured heartbeat, I tried to start it, but I got a surprise when I saw that in one minute pacemaker died due to a SEGFAULT. [ Config File ] /etc/ha.d/ha.cf pacemaker respawn logfile /var/log/ha-log logfacility local0 coredumps true keepalive 2 deadtime 30 warntime 10 initdead 120 auto_failback off ucast eth0 xx.xx.xx.xx ucast eth0 xx.xx.xx.xy nodelb01sid nodelb02sid [ Logs ] /var/log/ha.log Jun 02 15:57:24 lb01sid ccm: [1059]: info: client (pid=4878) removed from ccm Jun 02 15:57:25 lb01sid heartbeat: [1039]: WARN: Managed /usr/lib/heartbeat/crmd process 4878 killed by signal 11 [SIGSEGV - Segmentation violation]. Jun 02 15:57:25 lb01sid heartbeat: [1039]: ERROR: Managed /usr/lib/heartbeat/crmd process 4878 dumped core Jun 02 15:57:25 lb01sid heartbeat: [1039]: ERROR: Respawning client /usr/lib/heartbeat/crmd: I made a trace with gdb from the core dump: Reading symbols from /usr/lib/heartbeat/crmd...Reading symbols from /usr/lib/debug//usr/lib/pacemaker/crmd...done. done. [New LWP 1064] [Thread debugging using libthread_db enabled] Using host libthread_db library /lib/x86_64-linux-gnu/libthread_db.so.1. Core was generated by `/usr/lib/heartbeat/crmd'. Program terminated with signal SIGSEGV, Segmentation fault. #0 0x7fd610a7b7f1 in ?? () from /usr/lib/libhbclient.so.1 (gdb) bt #0 0x7fd610a7b7f1 in ?? () from /usr/lib/libhbclient.so.1 #1 0x7fd616a083fd in g_main_context_prepare () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #2 0x7fd616a08de8 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #3 0x7fd616a08f77 in g_main_context_pending () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #4 0x7fd619f0ed40 in crmd_exit (rc=0) at control.c:394 #5 0x7fd619f0a084 in s_crmd_fsa_actions (fsa_data=0x7fd61b03e0e0) at fsa.c:434 #6 0x7fd619f0bd47 in s_crmd_fsa (cause=453239008) at fsa.c:231 #7 0x7fd619f165c2 in crm_fsa_trigger (user_data=0x7fd61af20890) at callbacks.c:256 #8 0x7fd619067291 in crm_trigger_dispatch (source=0x7fd61af37010, callback=0x7fd6180e0740, userdata=0x0) at mainloop.c:105 #9 0x7fd616a08b4d in g_main_context_dispatch () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #10 0x7fd616a08f20 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #11 0x7fd616a09242 in g_main_loop_run () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #12 0x7fd619f07c4c in crmd_init () at main.c:154 #13 0x7fd619f079d3 in main (argc=1, argv=0x7ffdac926738) at main.c:121 (gdb) -- System Information: Debian Release: stretch/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 4.0.0-1-amd64 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages pacemaker depends on: ii adduser 3.113+nmu3 ii crmsh1.2.6+git+e77add-1.3 ii heartbeat1:3.0.5+hg12629-1.2 ii iputils-ping 3:20121221-5+b2 ii libbz2-1.0 1.0.6-8 ii libc62.19-18 ii libcfg4 1.4.6-1.1 ii libcib3 1.1.10+git20130802-4.1 ii libconfdb4 1.4.6-1.1 ii libcoroipcc4 1.4.6-1.1 ii libcpg4 1.4.6-1.1 ii libcrmcluster4 1.1.10+git20130802-4.1 ii libcrmcommon31.1.10+git20130802-4.1 ii libcrmservice1 1.1.10+git20130802-4.1 ii libglib2.0-0 2.44.1-1 ii libgnutls-deb0-283.3.15-2 ii liblrmd1 1.1.10+git20130802-4.1 ii libltdl7 2.4.2-1.11 ii libncurses5 5.9+20150516-2 ii libpam0g 1.1.8-3.1 ii libpe-rules2 1.1.10+git20130802-4.1 ii libpe-status41.1.10+git20130802-4.1 ii libpengine4 1.1.10+git20130802-4.1 ii libpils2 1.0.12~rc1+hg2777-1.2 ii libplumb21.0.12~rc1+hg2777-1.2 ii libqb0 0.17.1-3 ii libstonithd2 1.1.10+git20130802-4.1 ii libtinfo55.9+20150516-2 ii libtransitioner2 1.1.10+git20130802-4.1 ii libuuid1 2.26.2-6 ii libxml2 2.9.2+dfsg1-3 ii libxslt1.1 1.1.28-2+b2 ii pacemaker-cli-utils 1.1.10+git20130802-4.1 ii python 2.7.9-1 ii resource-agents 1:3.9.3+git20121009-3.1 pacemaker recommends no packages. pacemaker suggests no packages === Do you need something more? Best Regards
Bug#785717: Route displayed as existent but has no effect on iptraffic
Package: linux-image-3.2.0-4-amd64 Version: 3.2.60-1+deb7u3 Arch:amd64 Linux Desc:3.2 for 64-bit PCs When using 'route -n' or 'ip route show' a certain /24 Route is displayed, but does not have effect on the routing decision of the kernel. After removing the bogus route and setting it once again, everything works as expected. Other packages in conjunction: net-tools_1.60-24.2_amd64 iproute_20120521-3+b3_amd64 vlan_1.9-3_amd64 libc6_2.13-38+deb7u4_amd64 Here is a transcript: --%- toaster:~# ping 192.168.18.1 PING 192.168.18.1 (192.168.18.1) 56(84) bytes of data. ^C --- 192.168.18.1 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2006ms toaster:~# ping 192.168.18.2 PING 192.168.18.2 (192.168.18.2) 56(84) bytes of data. ^C --- 192.168.18.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1006ms toaster:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 0.0.0.0 192.124.246.50 0.0.0.0 UG0 00 vlan10 192.124.246.0 0.0.0.0 255.255.255.0 U 0 00 vlan10 192.168.1.0 0.0.0.0 255.255.255.0 U 0 00 vlan13 192.168.11.00.0.0.0 255.255.255.0 U 0 00 vlan12 192.168.18.0192.124.246.48 255.255.255.0 UG0 00 vlan10 192.168.71.00.0.0.0 255.255.255.0 U 0 00 vlan11 toaster:~# ip route show default via 192.124.246.50 dev vlan10 192.124.246.0/24 dev vlan10 proto kernel scope link src 192.124.246.66 192.168.1.0/24 dev vlan13 proto kernel scope link src 192.168.1.11 192.168.11.0/24 dev vlan12 proto kernel scope link src 192.168.11.201 192.168.18.0/24 via 192.124.246.48 dev vlan10 192.168.71.0/24 dev vlan11 proto kernel scope link src 192.168.71.201 toaster:~# traceroute 192.168.18.1 traceroute to 192.168.18.1 (192.168.18.1), 30 hops max, 60 byte packets 1 win1.asfh-berlin.de (192.124.246.50) 0.319 ms 0.309 ms 0.302 ms 2 * * * 3 * * * 4 * * * 5 * * * 6 * * * 7 *^C toaster:~# traceroute 192.168.18.2 traceroute to 192.168.18.2 (192.168.18.2), 30 hops max, 60 byte packets 1 gw.asfh-berlin.de (192.124.246.48) 0.146 ms * * 2 10.8.0.2 (10.8.0.2) 23.625 ms 23.562 ms 23.561 ms 3 * * * 4 * * * 5 * * * 6 * * * 7 * * * 8 * * * 9 * * * 10 * * * 11 * * * 12 * * * 13 * * * 14 * * * 15 * * * 16 * * * 17 * * * 18 *^C toaster:~# traceroute 192.168.18.1 traceroute to 192.168.18.1 (192.168.18.1), 30 hops max, 60 byte packets 1 win1.asfh-berlin.de (192.124.246.50) 0.126 ms 0.111 ms 0.103 ms 2 * * * 3 * * * 4 * * * 5 * * * 6 * * * 7 * * * 8 * * * 9 * * * 10 * * * 11 * * * 12 * *^C toaster:~# route del -net 192.168.18.0/24 gw 192.124.246.48 toaster:~# route add -net 192.168.18.0/24 gw 192.124.246.48 toaster:~# traceroute 192.168.18.1 traceroute to 192.168.18.1 (192.168.18.1), 30 hops max, 60 byte packets 1 * * * 2 192.168.18.1 (192.168.18.1) 24.327 ms 24.309 ms 24.279 ms toaster:~# traceroute 192.168.18.2 traceroute to 192.168.18.2 (192.168.18.2), 30 hops max, 60 byte packets 1 gw.asfh-berlin.de (192.124.246.48) 0.183 ms 0.166 ms 0.156 ms 2 10.8.0.2 (10.8.0.2) 23.559 ms 23.558 ms 23.551 ms 3 * * * 4 * * * 5 * * * 6 * * * 7 * * * 8 * * * 9 * * * 10 * * * 11 * * * 12 * * * 13 * * * 14 * * * 15 * * * 16 * * * 17 * * * 18 * * *^C toaster:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 0.0.0.0 192.124.246.50 0.0.0.0 UG0 00 vlan10 192.124.246.0 0.0.0.0 255.255.255.0 U 0 00 vlan10 192.168.1.0 0.0.0.0 255.255.255.0 U 0 00 vlan13 192.168.11.00.0.0.0 255.255.255.0 U 0 00 vlan12 192.168.18.0192.124.246.48 255.255.255.0 UG0 00 vlan10 192.168.71.00.0.0.0 255.255.255.0 U 0 00 vlan11 toaster:~# ip route show default via 192.124.246.50 dev vlan10 192.124.246.0/24 dev vlan10 proto kernel scope link src 192.124.246.66 192.168.1.0/24 dev vlan13 proto kernel scope link src 192.168.1.11 192.168.11.0/24 dev vlan12 proto kernel scope link src 192.168.11.201 192.168.18.0/24 via 192.124.246.48 dev vlan10 192.168.71.0/24 dev vlan11 proto kernel scope link src 192.168.71.201 toaster:~# lspci 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) 00:01.0 PCI bridge: Intel Corporation 3200/3210 Chipset Host-Primary PCI Express Bridge (rev 01) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I
Bug#762132: fglrx-driver: Update to 1:14.6~ga14.201-1 amd64: Mouse cursor gone
Same problem here. Jessie clean install, now working with integrated grapics card --px-igpu but no ATI accel.
Bug#778422: moodle: PHP fatal error while using forum activity
Package: moodle Version: 2.7.5+dfsg-2 Severity: important Tags: newcomer Dear Maintainer, When you add a forum activity and try to see a forum post, a HTTP 500 error is returned. PHP log reports: PHP Fatal error: Class 'core_availability\info_module' not found in /usr/share/moodle/mod/forum/lib.php on line 5571 I found the fix from the original sources: the directory /availability is missing from the installed deb package. Once you put this directory under /usr/share/moodle, go to Administration Site administration Notifications to configure the missing directory, and then the forums start working. I guess this is a packaging issue: I checked the downloaded deb package, and also tried to build from source. Both times the same directory is missing. I hope this helps you to fix this bug. Best regards. -- System Information: Debian Release: 8.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=es_CO.UTF-8, LC_CTYPE=es_CO.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages moodle depends on: pn apache2 | httpdnone pn dbconfig-commonnone ii debconf [debconf-2.0] 1.5.55 pn libapache2-mod-php5 | php5-cgi none pn libphp-adodb none pn libphp-pclzip none pn libphp-phpmailer none pn php-htmlpurifier none pn php5-cli none pn php5-curl none pn php5-gdnone pn php5-mysql | php5-pgsqlnone ii postgresql-client 9.4+165 ii postgresql-client-9.4 [postgresql-client] 9.4.0-1 ii ucf3.0030 Versions of packages moodle recommends: ii aspell0.60.7~20110707-1.3 pn mimetex none pn php5-ldap none pn php5-xmlrpc none pn postgresql | mysql-server | virtual-mysql-server none Versions of packages moodle suggests: pn clamav none -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#741697: linux-image-3.13-1-amd64: Radeon r600 driver fail when using HDMI monitor
Package: src:linux Version: 3.13.5-1 Severity: important Running Debian Jessie, and this problem appeared after upgrading to kernel 3.13-1 from 3.12-x This may be similar to report 737684. When running X with one monitor (DVI), and I plug in another (HDMI) and enable it (xfce monitor utility) the system freezes completly. When starting X with an HDMI monitor only, it fails to start correctly. Syslog shows the following entry: Mar 15 20:13:56 urquell kernel: [ 15.412532] BUG: unable to handle kernel NULL pointer dereference at 0080 Mar 15 20:13:56 urquell kernel: [ 15.412682] IP: [81162052] kfree+0x92/0x200 Mar 15 20:13:56 urquell kernel: [ 15.412774] PGD 0 Mar 15 20:13:56 urquell kernel: [ 15.412812] Oops: [#1] SMP Mar 15 20:13:56 urquell kernel: [ 15.412872] Modules linked in: ipt_REJECT ipt_MASQUERADE xt_conntrack iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables x_tables fuse snd_hda_codec_hdmi snd_ice1724 snd_ak4113 snd_pt2258 snd_ak4114 snd_i2c snd_ice17xx_ak4xxx snd_ak4xxx_adda snd_seq_midi powernow_k8 snd_seq_midi_event kvm_amd snd_hda_intel snd_hda_codec radeon kvm snd_rawmidi snd_hwdep snd_ac97_codec snd_pcm snd_page_alloc edac_mce_amd snd_seq pcspkr k8temp snd_seq_device snd_timer edac_core ttm drm_kms_helper drm snd i2c_algo_bit ac97_bus soundcore joydev evdev parport_pc parport asus_atk0110 button processor thermal_sys i2c_nforce2 i2c_core ext4 crc16 mbcache jbd2 xts gf128mul hid_generic usbhid hid dm_crypt dm_mod sd_mod sg crct10dif_generic crc_t10dif sr_mod crct10dif_common cdrom ata_generic usb_storage r8169 mii sata_nv pata_amd ohci_pci ehci_pci libata ohci_hcd ehci_hcd scsi_mod forcedeth usbcore usb_common Mar 15 20:13:56 urquell kernel: [ 15.414498] CPU: 0 PID: Comm: Xorg Not tainted 3.13-1-amd64 #1 Debian 3.13.5-1 Mar 15 20:13:56 urquell kernel: [ 15.414620] Hardware name: System manufacturer System Product Name/M2N68 Plus, BIOS 170106/10/2010 Mar 15 20:13:56 urquell kernel: [ 15.414766] task: 880079c3e800 ti: 880079c1 task.ti: 880079c1 Mar 15 20:13:56 urquell kernel: [ 15.414884] RIP: 0010:[81162052] [81162052] kfree+0x92/0x200 Mar 15 20:13:56 urquell kernel: [ 15.415007] RSP: 0018:880079c11ac0 EFLAGS: 00010046 Mar 15 20:13:56 urquell kernel: [ 15.415092] RAX: RBX: 880079a9 RCX: 2042cfea Mar 15 20:13:56 urquell kernel: [ 15.415204] RDX: ea70e9a0 RSI: 71fc RDI: a042cfea Mar 15 20:13:56 urquell kernel: [ 15.415316] RBP: a042cfea R08: 0017 R09: 0016 Mar 15 20:13:56 urquell kernel: [ 15.415428] R10: 880079a9 R11: R12: 0282 Mar 15 20:13:56 urquell kernel: [ 15.415539] R13: R14: R15: a04d5ad0 Mar 15 20:13:56 urquell kernel: [ 15.415653] FS: 7fe18b6a0980() GS:88007fc0() knlGS: Mar 15 20:13:56 urquell kernel: [ 15.415780] CS: 0010 DS: ES: CR0: 80050033 Mar 15 20:13:56 urquell kernel: [ 15.415871] CR2: 0080 CR3: 79cc4000 CR4: 07f0 Mar 15 20:13:56 urquell kernel: [ 15.415983] Stack: Mar 15 20:13:56 urquell kernel: [ 15.416004] 0002 880079a9 88007a3bbe40 Mar 15 20:13:56 urquell kernel: [ 15.416004] 880079a4de00 a04599c9 880079c11b38 Mar 15 20:13:56 urquell kernel: [ 15.416004] 880079a9 880079a9 7410 880079a913ec Mar 15 20:13:56 urquell kernel: [ 15.416004] Call Trace: Mar 15 20:13:56 urquell kernel: [ 15.416004] [a04599c9] ? r600_hdmi_setmode+0x539/0x5c0 [radeon] Mar 15 20:13:56 urquell kernel: [ 15.416004] [a042cfea] ? radeon_irq_kms_enable_afmt+0x4a/0x60 [radeon] Mar 15 20:13:56 urquell kernel: [ 15.416004] [a0459e9d] ? r600_hdmi_enable+0xdd/0x2f0 [radeon] Mar 15 20:13:56 urquell kernel: [ 15.416004] [a0297a50] ? drm_crtc_helper_set_mode+0x480/0x4f0 [drm_kms_helper] Mar 15 20:13:56 urquell kernel: [ 15.416004] [a04201c0] ? radeon_connector_set_property+0x180/0x2f0 [radeon] Mar 15 20:13:56 urquell kernel: [ 15.416004] [a02b4516] ? drm_mode_obj_set_property_ioctl+0x136/0x340 [drm] Mar 15 20:13:56 urquell kernel: [ 15.416004] [a02b4749] ? drm_mode_connector_property_set_ioctl+0x29/0x30 [drm] Mar 15 20:13:56 urquell kernel: [ 15.416004] [a02a493d] ? drm_ioctl+0x46d/0x570 [drm] Mar 15 20:13:56 urquell kernel: [ 15.416004] [814a9921] ? __do_page_fault+0x1d1/0x500 Mar 15 20:13:56 urquell kernel: [ 15.416004] [a03fc044] ? radeon_drm_ioctl+0x44/0x80 [radeon] Mar 15 20:13:56 urquell kernel: [ 15.416004] [8118b5bf] ? do_vfs_ioctl+0x2cf/0x4a0 Mar 15 20:13:56 urquell kernel: [ 15.416004] [8117b798] ? __sb_end_write+0x28/0x60 Mar
Bug#670804: Fwd: Bug#670804: Software flow control doesn't work correctly.
-- Forwarded message -- From: Oscar Molin oscarmo...@gmail.com Date: 2014/1/5 Subject: Re: Bug#670804: Software flow control doesn't work correctly. To: Uwe Kleine-König u.kleine-koe...@pengutronix.de Hi Sorry but this was ages ago and I don't have access to this hardware anymore to try it. It's possible these other terminal programs had different tolerances with regards to stop bits etc and that the development board I was using at the time was actually too far out of sync in terms of baud rate. I seem to remember these MSP430s had a complicated clock system and it might have deviated too much from the baud rate used by the PC. If you want to investigate these effects you might consider using some cheap embedded prototype board and set the clocks further and further away from the correct speed and see which terminal program stops working first. In my use case, the data amounts were small so the xoff/xon appeared very often. Maybe they were mistaken for bits? To clarify, the device I used was a Zolertia Z1, which is a wireless prototyping board with a MSP430 microcontroller and a rs232 to usb bridge chip, and it was connected to a PC using this usb connection. If you think this would be an interesting line of inquiry, I actually have access to a wide range of embedded prototyping and evaluation boards for a wide range of microcontrollers as I'm now employed at an embedded compiler/ide company so I could test some devices with microcom and other terminal programs. However I think the issue is general one so testing wouldn't really give any useful data. Microcom is/was for some reason more picky about having correct baud rate than other serial terminal programs like putty or nanocom etc. As you probably know, these boards rarely have the special 4.13MHz(or whatever it is, it slips my mind at the moment) crystal for UART that most PCs have, so the clock used by the UART in microcontrollers usually deviate a few % from the clock in the host PC. Best regards, Oscar Molin 2014/1/4 Uwe Kleine-König u.kleine-koe...@pengutronix.de tags 670804 + moreinfo thanks Hello Oscar, On Sun, Apr 29, 2012 at 08:46:20AM +0200, Oscar Molin wrote: Connecting to /dev/ttyUSB0 (CP210x) to a Zolertia Z1, software flow control setting doesn't work when enabled in the microcom menu. When typing characters into microcom, only some characters are received by the device at the other end. Equivalent settings tested in linux putty and nanocom work correctly. With software flow control you mean you do flow soft in the microcom menu? Can you please provide the output of stty -F /dev/ttyUSB0 once with microcom running with software flow control and once with putty or nanocom. (So once with the broken state and once with the good one.) Best regards Uwe
Bug#724745: ice35-services: templates.xml appears compresed (.gz)
Package: ice35-services Version: 3.5.0-3 Severity: important Dear Maintainer, The file /usr/share/doc/ice35-services/config/templates.xml.gz should be uncompressed, because IceGrid is not able to use it compressed. Thanks. -- System Information: Debian Release: jessie/sid APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores) Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#716758: python3-zeroc-ice: python3 support for ZeroC Ice
Package: python3-zeroc-ice Severity: normal Dear Maintainer, I would like to have support for Python3 on the new release version of ZeroC Ice middleware. Currently, only Python 2.7 is supported. Thanks in advance! -- System Information: Debian Release: 7.1 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores) Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#679232: libxft2: update from 2.2.0-3 - 2.3.1-1 breaks font in rxvt-unicode
Hi, This seems to be a problem with some font's hints. For me (using DejaVu Sans Mono and 2.3.1-1) it works fine if I add this line to my `.Xdefaults`: URxvt.letterSpace: -1 signature.asc Description: Digital signature
Bug#690503: iagno crashed when a move was made by human player. Sound effect was played repeatedly before crash.
Package: iagno Version: 1:3.4.2-3 Severity: normal Dear Maintainer, iagno crashed close to the end of a game (CPU was losing) with only two places left to fill. After placing my marker, the sound effect was played repeatedly for maybe 10 (that I could hear) times and the game window disappeared without any message. In syslog the following line was repeated around 200 times: Oct 15 XX:XX:XX hostname pulseaudio[4019]: [pulseaudio] sink-input.c: Failed to create sink input: too many inputs per sink. Game settings was CPU player level 1 difficulty. -- System Information: Debian Release: wheezy/sid APT prefers testing-updates APT policy: (500, 'testing-updates'), (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-3-amd64 (SMP w/8 CPU cores) Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages iagno depends on: ii dconf-gsettings-backend [gsettings-backend] 0.12.1-2 ii gnome-games-data 1:3.4.2-3 ii libatk1.0-0 2.4.0-2 ii libc62.13-35 ii libcairo21.12.2-2 ii libcanberra-gtk3-0 0.28-5 ii libgdk-pixbuf2.0-0 2.26.1-1 ii libglib2.0-0 2.32.3-1 ii libgtk-3-0 3.4.2-4 ii libpango1.0-01.30.0-1 ii librsvg2-2 2.36.1-1 Versions of packages iagno recommends: ii gnome-games-extra-data 3.2.0-4 iagno suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#670804: Software flow control doesn't work correctly.
Subject: microcom: Software flow control doesn't work correctly. Package: microcom Version: 2009.6-1 Severity: normal Dear Maintainer, Connecting to /dev/ttyUSB0 (CP210x) to a Zolertia Z1, software flow control setting doesn't work when enabled in the microcom menu. When typing characters into microcom, only some characters are received by the device at the other end. Equivalent settings tested in linux putty and nanocom work correctly. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/8 CPU cores) Locale: LANG=sv_SE.utf8, LC_CTYPE=sv_SE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages microcom depends on: ii libc6 2.13-30 microcom recommends no packages. microcom suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#660807: linthesia: fails to open
Package: linthesia Version: 0.4.2-3 Severity: important Dear Maintainer, When I try to open linthesia after choose the midi file I get this. (linthesia:3155): GdkGLExt-WARNING **: cannot load PangoFont glibmm-ERROR **: unhandled exception (type std::exception) in signal handler: what: std::exception -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-1-amd64 (SMP w/1 CPU core) Locale: LANG=es_CO.UTF-8, LC_CTYPE=es_CO.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linthesia depends on: ii libasound21.0.24.1-4 ii libatk1.0-0 2.2.0-2 ii libatkmm-1.6-12.22.6-1 ii libc6 2.13-26 ii libcairo2 1.10.2-6.2 ii libcairomm-1.0-1 1.10.0-1 ii libfontconfig12.8.0-3.1 ii libfreetype6 2.4.8-1 ii libgcc1 1:4.6.2-12 ii libgconf2-4 2.32.4-1 ii libgconfmm-2.6-1c22.28.0-1 ii libgdk-pixbuf2.0-02.24.1-1 ii libgl1-mesa-glx [libgl1] 7.11.2-1 ii libglib2.0-0 2.30.2-6 ii libglibmm-2.4-1c2a2.30.0-2 ii libglu1-mesa [libglu1]7.11.2-1 ii libgtk2.0-0 2.24.9-2 ii libgtkglext1 1.2.0-2 ii libgtkglextmm-x11-1.2-0 1.2.0-4.1 ii libgtkmm-2.4-1c2a 1:2.24.2-1 ii libice6 2:1.0.7-2 ii libpango1.0-0 1.29.4-2 ii libpangomm-1.4-1 2.28.4-1 ii libsigc++-2.0-0c2a2.2.9-1.1 ii libsm62:1.2.0-2 ii libstdc++64.6.2-12 ii libx11-6 2:1.4.4-4 ii libxmu6 2:1.1.0-3 ii libxt61:1.1.1-2 Versions of packages linthesia recommends: ii timidity 2.13.2-40 linthesia suggests no packages. -- no debconf information I'm using Xfce and I hope that you can help me, thanks -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#640002: xserver-xorg-video-intel: Intel driver freezes wheezy system on Sandybridge HD3000 chipset
Hi, kernel 3 is really a dramatic issue for my system (it causes overheating of cpu and so fan's noising) anyway i tried also the xserver and the -intel driver from sid but nothing changes, the problem is still the same. Hope to made clear answers.. Cheers Date: Thu, 1 Sep 2011 14:59:44 +0200 From: k...@debian.org To: lancelot1...@hotmail.it; 640...@bugs.debian.org Subject: Re: Bug#640002: xserver-xorg-video-intel: Intel driver freezes wheezy system on Sandybridge HD3000 chipset Hi, lancelot lancelot1...@hotmail.it (01/09/2011): Package: xserver-xorg-video-intel Version: 2:2.15.0-3 Severity: important please check what happens with kernel 3.x and with -intel from sid (which means a new server as well). Mraw, KiBi.
Bug#640002: xserver-xorg-video-intel: Intel driver freezes wheezy system on Sandybridge HD3000 chipset
Bug number 40564 in upstream: https://bugs.freedesktop.org/show_bug.cgi?id=40564 Thanks Date: Thu, 1 Sep 2011 20:15:51 +0200 From: jcris...@debian.org To: lancelot1...@hotmail.it; 640...@bugs.debian.org CC: k...@debian.org Subject: Re: Bug#640002: xserver-xorg-video-intel: Intel driver freezes wheezy system on Sandybridge HD3000 chipset On Thu, Sep 1, 2011 at 15:05:30 +0200, Oscar Frasciello wrote: Hi, kernel 3 is really a dramatic issue for my system (it causes overheating of cpu and so fan's noising) anyway i tried also the xserver and the -intel driver from sid but nothing changes, the problem is still the same. Hope to made clear answers.. Please report your issue upstream following http://intellinuxgraphics.org/how_to_report_bug.html and let us know the bug number for tracking. Thanks, Julien
Bug#619434: this bug is quite severe
Package: gnome-terminal Version: 3.0.1-1 Followup-For: Bug #619434 When you press F1 or click on Help-Contents infinite windows opens. dpkg -s gnome-terminal Package: gnome-terminal Status: install ok installed Priority: optional Section: gnome Installed-Size: 756 Maintainer: Guilherme de S. Pastore gpast...@debian.org Architecture: i386 Version: 3.0.1-1 Replaces: gnome-terminal-data ( 2.26.2-3) Provides: x-terminal-emulator Depends: libatk1.0-0 (= 1.12.4), libc6 (= 2.3.6-6~), libgconf2-4 (= 2.31.1), libgdk-pixbuf2.0-0 (= 2.22.0), libglib2.0-0 (= 2.26.0), libgtk-3-0 (= 3.0.0), libice6 (= 1:1.0.0), libpango1.0-0 (= 1.14.0), libsm6, libvte-2.90-9 (= 1:0.27.2), libx11-6, gsettings-desktop-schemas (= 0.1.0), gnome-terminal- data (= 3.0), gnome-terminal-data ( 3.1) Recommends: yelp, gvfs Description: GNOME terminal emulator application GNOME Terminal is a terminal emulation application that you can use to perform the following actions: - Access a UNIX shell in the GNOME environment. - Run any application that is designed to run on VT102, VT220, and xterm terminals. . GNOME Terminal features the ability to use multiple terminals in a single window (tabs) and profiles support. -- System Information: Debian Release: wheezy/sid APT prefers testing-proposed-updates APT policy: (500, 'testing-proposed-updates'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.38-2-686-bigmem (SMP w/2 CPU cores) Locale: LANG=en_IE.utf8, LC_CTYPE=en_IE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gnome-terminal depends on: ii gnome-terminal-data 3.0.1-1Data files for the GNOME terminal ii gsettings-desktop-schemas 3.0.1-1GSettings deskop-wide schemas ii libatk1.0-0 2.0.0-1The ATK accessibility toolkit ii libc6 2.13-7 Embedded GNU C Library: Shared lib ii libgconf2-4 2.32.4-1 GNOME configuration database syste ii libgdk-pixbuf2.0-02.23.3-3 GDK Pixbuf library ii libglib2.0-0 2.28.6-1 The GLib library of C routines ii libgtk-3-03.0.10-1 GTK+ graphical user interface libr ii libice6 2:1.0.7-2 X11 Inter-Client Exchange library ii libpango1.0-0 1.28.3-6 Layout and rendering of internatio ii libsm62:1.2.0-2 X11 Session Management library ii libvte-2.90-9 1:0.28.1-1 Terminal emulator widget for GTK+ ii libx11-6 2:1.4.3-2 X11 client-side library Versions of packages gnome-terminal recommends: ii gvfs 1.6.4-3 userspace virtual filesystem - ser ii yelp 2.30.1+webkit-1 Help browser for GNOME gnome-terminal suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#625991: apt-get install python3-profiler fails to install missing file py_compile.py
Package: python3-profiler Version: 3.2-2 Severity: normal When running apt-get install python3-profiler Selecting previously deselected package python3-profiler. (Reading database ... 905495 files and directories currently installed.) Unpacking python3-profiler (from .../python3-profiler_3.2-2_i386.deb) ... Setting up python3-profiler (3.2-2) ... Traceback (most recent call last): File py_compile.py, line 201, in module sys.exit(main()) File py_compile.py, line 193, in main compile(filename, doraise=True) File py_compile.py, line 131, in compile encoding = read_encoding(file, utf-8) File py_compile.py, line 83, in read_encoding f = open(file, rb) IOError: [Errno 2] No such file or directory: 'profile.py' dpkg: error processing python3-profiler (--configure): subprocess installed post-installation script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: python3-profiler E: Sub-process /usr/bin/dpkg returned an error code (1) -- System Information: Debian Release: wheezy/sid APT prefers testing-proposed-updates APT policy: (500, 'testing-proposed-updates'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.38.2-local-local (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages python3-profiler depends on: ii python3 3.2-3 interactive high-level object-orie python3-profiler recommends no packages. Versions of packages python3-profiler suggests: pn python3-doc none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#620351: amarok: unable to set collection path since last upgrade
Hi, Currently I'm having the same problem. Doing a little investigation I've found that the problem is not the local collection place (I've got it mounted from a samba share from my homeserver) but using an external MySQL server. If you look in the database section in preferences you should find a message asking to set up the right privileges to the DB user user. Because the external collection DB is not loaded, the collection path information is not loaded too. I've spended some time trying to find the reason why Amarok is not able to connect to the external MySQL DB, but with no success. Can someone help me with it? -- *Oscar Vidakovic Mercader* *Unix System administrator and I+D developer* *Mobile phone:* *+34 6688 0 66 56* *Contact mail:* *vidako...@gmail.com* *Live Messenger: os...@vidakovic.es** * *Twitter: **nefeli*
Bug#619865: Intel i915 compatible and drm xorg problem
Hello, After updating to xserver-xorg-video-intel 2:2.14.0-4 I had the same problem on debian wheezy/sid I experienced this problem both on kernel 2.6.35.2 and 2.6.38.2 See the logs below. I fixed my system by removing the package xserver-xorg-video-intel and compiling from original source xf86-video-intel-2.13.0 from Xorg project. I would suggest to revert the changes since this is a pretty serious bug. --BEGIN LOGS-- /var/log/Xorg.0.log says [ 856.486] (EE) intel(0): Detected a hung GPU, disabling acceleration. = /var/log/kernel.log says Apr 12 09:14:29 montecarlo kernel: [ 800.576016] [drm:i915_hangcheck_elapsed] * ERROR* Hangcheck timer elapsed... GPU hung = lspci -v 00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 300b Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at d000 (32-bit, non-prefetchable) [size=1M] Memory at c000 (64-bit, prefetchable) [size=256M] I/O ports at 18c0 [size=8] Expansion ROM at unassigned [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Kernel driver in use: i915 = /etc/X11/xorg.conf Section Module Load extmod Load record Load dbe Load dri Load dri2 Load glx EndSection Section Device Identifier Card0 Driver intel BusID PCI:0:2:0 EndSection = --END LOGS-- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#601586: glpi: Please package new release 0.78
Package: glpi Severity: wishlist On october 12, 2010 GLPI version 0.78 was released: http://www.glpi- project.org/spip.php?page=annonceid_breve=199lang=fr Hope it can be packed soon :-) Kind regards, boti -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#596241: ITP: ase -- Allegro Sprite Editor
Package: wnpp Severity: wishlist Owner: Oscar Morante os...@morante.eu * Package name: ase Version : 0.8.1-beta Upstream Author : David Capello davidcape...@gmail.com * URL : http://www.aseprite.org/ * License : GPL Programming Lang: C++ Description : Allegro Sprite Editor ASE (Allegro Sprite Editor) is an open source program to create animated sprites. Sprites are little images that can be used in your website or in a video game. You can draw characters with movement, intros, textures, patterns, backgrounds, logos, color palettes, isometric levels, etc. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#585973: libgstffmpeg.so linked to missing libva-0.31.0.6.so.1
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, I just ran apt-get upgrade on my squeeze/sid and I this error. I found a workaround that could be useful in case you are stuck and you need to play some video. As root cd /usr/lib ln -s libva.so.1 libva-0.31.0.6.so.1 I think it could be solved by installing libva-0.31 from source (again another workaround) - -- Oscar -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Use GnuPG with Firefox : http://getfiregpg.org (Version: 0.8) iQEcBAEBAgAGBQJMGWi/AAoJEIvuSDkpOeZB7dwIAJ34piymhJUDILiQ8Z9qo6sA kfTNiW2Nz1+EMD9y863yO2px3+0mxvArDC3XVTOGtGUWZX5HQpIwP5+3UzmT1vz3 oSvMJc8dUPB+71TDP2FWe6FKR2102tP7aFjLh0EtKBvTlPvQWQBGxtpbE2QJbpxO Z2A6vyJdwAYu4Z14wIh3dmmDTxYABvbhyXgC+LeffXTpwpo/Aa+iM50stAi+t1LD pw87/9O1Kq2yET1z3YOVaOhXMc+zuymCyFC28REmFCQCsaMzWRYo78SLBmB6hyiI ID1pLZuIPHb8eC6OHN+Fjts9EvHWJ7/bvTIiLTwTnCMO/T9FBUaGiP3fMawAq3c= =7t2m -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#557726: miro: Needs xulrunner-1.9 package to be installable, but xulrunner-1.9.1 is installed
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 There is a quick workaround for who is looking to install miro 1) apt-get source miro 2) cd miro-2.5.3/debian 3) edit the file control and change xulrunner-1.9 to xulrunner-1.9.1 4) dpkg-buildpackage -rfakeroot -uc -b Basically it's the same solution as described in the previous patch. It should be pretty straight forward to fix it again. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Use GnuPG with Firefox : http://getfiregpg.org (Version: 0.7.10) iEYEARECAAYFAkvWP7AACgkQ6qdsrRmKQ+oWLwCgjb2Iso9khD1Z3zws34kywqGX XZUAoJ5B+h7FU27CoAg6fKod+IAw0UX1 =VE0h -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#566982: qwit: Qwit doesn't receive RTs posted from the web twitter.com
Package: qwit Version: 1.0+svn300-1 Severity: normal *** Please type your report below this line *** -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages qwit depends on: ii libc6 2.10.2-2 GNU C Library: Shared libraries ii libgcc1 1:4.4.2-9 GCC support library ii libqt4-network4:4.5.3-4 Qt 4 network module ii libqt4-xml4:4.5.3-4 Qt 4 XML module ii libqtcore44:4.5.3-4 Qt 4 core module ii libqtgui4 4:4.5.3-4 Qt 4 GUI module ii libstdc++64.4.2-9The GNU Standard C++ Library v3 qwit recommends no packages. qwit suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#539001: more on qtiplot
Hi, thanks a lot for your reply, don't worry for the time delay! :-) The package works fine. Please, excuse me if i ask you something else, but i's like to know if there are any ways to: 1) enhance qtiplot speed..when several plots are made on a same project, any change or operation (just as right-mouse clicking) takes really a lot (too much) time, even on powerful machines (high-accelerated graphic card provided) but more on light machines (just as my Asus eee-pc 1000H); 2) emulate many origin-like software plotting function every points; it's useful when handling curves with a lot of data in a given range, so one can plot not all the data set but a given sub-set choosen AMONG all the data, for example among 400 data points i plot EVERY 10 so the data plotted are just 40; i wasn't able to find, if it exist, this option in qtiplot. I'll really appreciate your support. Thanks a lot in advance. Cheers, Oscar === L'Istituto Superiore di Sanità (ISS) è tra i beneficiari dei proventi del 5 per mille dell'IRPEF. Nella scheda allegata alla dichiarazione dei redditi è sufficiente apporre la propria firma nel riquadro Finanziamento della Ricerca Sanitaria e indicare il Codice Fiscale dell'ISS, che è 80211730587, per destinare tali fondi a sostegno dell'impegno scientifico dell'ISS a difesa della salute di tutti. === -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#539001: qtiplot: crashes on graph creation and on qti project opening
Package: qtiplot Version: 0.9.7-1 Severity: grave Justification: renders package unusable when opening previously created qti projects or creating new graphs, qtiplot crashes leaving in shell this message (on both cases): qtiplot: symbol lookup error: qtiplot: undefined symbol: _ZNK14QwtScaleEngine8hiMarginEv -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores) Locale: LANG=it_IT, LC_CTYPE=it_IT (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages qtiplot depends on: ii libc6 2.9-12GNU C Library: Shared libraries ii libgcc11:4.4.0-5 GCC support library ii libgl1-mesa-glx [libgl 7.0.3-7 A free implementation of the OpenG ii libglu1-mesa [libglu1] 7.0.3-7 The OpenGL utility library (GLU) ii libgsl0ldbl1.12+dfsg-1 GNU Scientific Library (GSL) -- li ii libmuparser0 1.28-3fast mathematical expressions pars ii liborigin0 20080225-2library for reading OriginLab Orig ii libqt4-assistant 4.5.1-2 Qt 4 assistant module ii libqt4-network 4.5.1-2 Qt 4 network module ii libqt4-opengl 4.5.1-2 Qt 4 OpenGL module ii libqt4-qt3support 4.5.1-2 Qt 3 compatibility library for Qt ii libqt4-svg 4.5.1-2 Qt 4 SVG module ii libqt4-xml 4.5.1-2 Qt 4 XML module ii libqtcore4 4.5.1-2 Qt 4 core module ii libqtgui4 4.5.1-2 Qt 4 GUI module ii libqwt5-qt45.2.0-1 Qt4 widgets library for technical ii libqwtplot3d-qt4 0.2.7+svn191-23D plotting library based on Qt4/O ii libstdc++6 4.4.0-5 The GNU Standard C++ Library v3 ii python-central 0.6.11register and build utility for Pyt ii python-qt4 4.4.4-6 Python bindings for Qt4 ii python2.5 2.5.4-1 An interactive high-level object-o ii zlib1g 1:1.2.3.3.dfsg-13 compression library - runtime qtiplot recommends no packages. qtiplot suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#407722: Where does git-core-dev sit?
Gerrit Pape wrote: On Tue, Feb 17, 2009 at 02:51:17PM -0800, Marc Oscar Singer wrote: Even though there is a report here that closes the bug, the package isn't available. It's been available for a very short time, look for git-core-dev in /usr/share/doc/git-core/changelog.Debian.gz Do you mean *was* available? * debian/control, debian/rules: remove git-core-dev package again, libgit.a is not a publically usable/useful library at this moment, as its internal API is not cast in stone yet. Is it likely that we'll see anything here ever? In other words, I have a package that depends on libgit that downloads git as part of the build--probably not an acceptable build methodology. Am I going to have an option to build it using libgit from git-core? It depends on upstream. Back then, Junio asked to not provide such a library package in Debian, and I respect that. There've been some plans and effort to stabilize the lib in the past, but I'm not sure about the status. Regards, Gerrit. Would it be a compromise to provide libgit.a as a static library for until it stabilizes? -- Marc Singer Bureau of Gizmology e...@synapse.com t. 206.832.3712 800.682.0581 f. 206.381.0899 Synapse Product Development, LLC. 1511 6th Avenue, 4th floor Seattle, WA 98101 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#407722: Where does git-core-dev sit?
Even though there is a report here that closes the bug, the package isn't available. Is it likely that we'll see anything here ever? In other words, I have a package that depends on libgit that downloads git as part of the build--probably not an acceptable build methodology. Am I going to have an option to build it using libgit from git-core? -- Marc Singer Bureau of Gizmology e...@synapse.com t. 206.832.3712 800.682.0581 f. 206.381.0899 Synapse Product Development, LLC. 1511 6th Avenue, 4th floor Seattle, WA 98101 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#500718: gnupg: symmetric option not compatible with output option
Werner Koch wrote: Hi! Sorry, I can't replicate that with a stock 1.4.9. Neither with gpg nor with gpg-zip. Shalom-Salam, Werner I may have entered the issue incorrectly. typescript attached. -- Marc Singer Bureau of Gizmology [EMAIL PROTECTED] t. 206.832.3712 800.682.0581 f. 206.381.0899 Synapse Product Development, LLC. 1511 6th Avenue, 4th floor Seattle, WA 98101 typescript Description: Binary data
Bug#494368: synergy: Synergy quits with assertion failure.
Jeff Licquia wrote: Marc Singer wrote: Started synergys with the following command line: synergys -f -d INFO After running for a couple of days, it reported an assertion failure on the console. synergys: ../../src/xcb_lock.c:77: _XGetXCBBuffer: Assertion `((int)((xcb_req) - (dpy-request)) = 0)' failed. This *could* be the same as the core dumping crashes, but there is no way to tell from the output. Looks similar to me; I think I'll end up merging them. As you wish. The assert makes it very debug-able. IMHO, this looks like memory corruption. I haven't run with MALLOC_CHECK_ (IIRC) just to see if the libc can tell us something about memory. What desktop setup do you have? Anything unusual (compiz, weird GNOME/KDE setup, etc.)? Using Gnome. Nothing non-standard ITO my Debian install. The other computer is a Mac. -- Marc Singer Bureau of Gizmology [EMAIL PROTECTED] t. 206.832.3712 800.682.0581 f. 206.381.0899 Synapse Product Development, LLC. 1511 6th Avenue, 4th floor Seattle, WA 98101 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#494368: synergy: Synergy quits with assertion failure.
Jeff Licquia wrote: Marc Oscar Singer wrote: Jeff Licquia wrote: Looks similar to me; I think I'll end up merging them. As you wish. The assert makes it very debug-able. IMHO, this looks like memory corruption. I haven't run with MALLOC_CHECK_ (IIRC) just to see if the libc can tell us something about memory. It could be, but my working theory right now is that synergy is not conforming to the X11 spec; it's assuming something that used to be true, but strictly speaking couldn't be assumed. Moving from the old X11 libs to the new XCB-based ones changed things, I think. We had a similar problem with the client that should now be fixed. Do you have any etch boxes you could test for this with? It may be too much to ask, I know, to run etch for a few days. :-) what test do you want run? Using Gnome. Nothing non-standard ITO my Debian install. The other computer is a Mac. OK, thanks. -- Marc Singer Bureau of Gizmology [EMAIL PROTECTED] t. 206.832.3712 800.682.0581 f. 206.381.0899 Synapse Product Development, LLC. 1511 6th Avenue, 4th floor Seattle, WA 98101 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#117436: boost your personal image
No woman cann't help from from getting laid with you http:// Oscar Vaughn -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#303168: She exposed herself to me
Never have a bad day of lovemaking ever again - Click here http://www.Priceypie.com/ So wet and pink -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#10520: Deliver her to pleasure
Obtain guaranteed, permanent, hassle-free growth with our product http://www.Drizzale.com/ Make her unbelievably wet -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#42962: instead at a
PhallusThumpingTory http://www.Sextiitoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#211586: bawdy angelfish arisen
Grab Prescripitons and Medicatoins while you still can! www.bayloranthem.airspace.lagtiu.com ! bawdyangelfish -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#216768: abash allegation andy
Purchase Prescriptinos and Medicaitons right now www.archdiocesebank.alligator%2eicoraun.com a abashallegation -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#297536: antennae beckman babysat
Take Prescriptoins and Medicaitons right now http://www.atriumbaudelaire.archery%2Eloloies.com the antennaebeckman -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#84845: Master Suite by Adobe 29 3, Pc or mac at 87%`discount
graphisoft archicad 9.0 r1 international - 69 coreldraw graphics suite x3 - 59 intuit quicken premier 2008 - 29 cakewalk project 5 - 59 discreet 3d studio max 6.0 with character studio - 129 corel wordperfect office x3 standard - 49 steinberg cubase sx 2.2.0.33 - 39 zend studio - 49 ` type `adobeoemsale. com` in Internet Exp|orer Erase ` before you type in Internet Exp|orer ` On Saturday, Colombian troops crossed into Ecuador and killed 17 Colombian rebels -- known as the FARC -- including Raul Reyes, the second-ranking commander of the Marxist group. In response to the incursion, both Ecuador and Venezuela have severed diplomatic ties with Colombia and are sending troops to their borders. Spain Fights Fla. Treasure Hunters' Shipwreck Claim -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#272334: brain in a way that sticks.
So quickprofit new MATCH found for quick profit in stocks Permanant Tech symb:P E R T -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#461621: mirror submission for ftp.utexas.edu: anonftpync should be used
Simon Paillard wrote: On Sat, Jan 19, 2008 at 09:28:57PM -0600, Oscar Ricardo Silva wrote: [..] CDImage-rsync: debian-cd/ Same as above, accessible at Debian-CD Could you rename your module to debian-cd ? Corrected Typo, you named it debian-CD instead of debian-cd :) ARGH!!! Sorry about that ... this has been corrected. This time it has been corrected properly. I will add your mirror to the list as soon as the rsync path is ok. Archive-upstream: ftp.us.debian.org Please take care at http://www.debian.org/mirrors/ftpmirror#wherefrom : you *MUST* precise which server you use in ftp.us.debian.org (which is a round robin). You can select one out of : ftp.egr.msu.edu mirrors.kernel.org debian.osuosl.org debian.lcs.mit.edu I will be using ftp.egr.msu.edu Something I forgot to precise: this problem mostly concerns the two stages rsync script, so the explicit mirror must be configured in anonftpsync as well. If I understood correctly then I've already done this. In my anonftpsync script I have: RSYNC_HOST=ftp.egr.msu.edu Oscar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#461621: mirror submission for ftp.utexas.edu: anonftpync should be used
Thanks for the fast response. Comments inline: Simon Paillard wrote: Hello, Thanks for submitting your Debian mirror. Please find some remarks, before we can include your mirror in the list: It seems you don't use anonftpsync, the strongly recommended script to mirror the Debian archive, and which implements all the requirements listed at http://www.debian.org/mirrors/ftpmirror. Please use anonftpsync, it allows the mirror to be operational even during its update, and generates the requited trace files to track mirrors activity. Fixed. I will now use anonftpsync and am running it right now. Archive-rsync: debian/ Not accessible at debian, but Debian is recognized. Could you rename your module to debian ? Corrected CDImage-ftp: /pub/debian-cd/ CDImage-http: /debian-cd/ CDImage-rsync: debian-cd/ Same as above, accessible at Debian-CD Could you rename your module to debian-cd ? Corrected IPv6: no Archive-upstream: ftp.us.debian.org Please take care at http://www.debian.org/mirrors/ftpmirror#wherefrom : you *MUST* precise which server you use in ftp.us.debian.org (which is a round robin). You can select one out of : ftp.egr.msu.edu mirrors.kernel.org debian.osuosl.org debian.lcs.mit.edu I will be using ftp.egr.msu.edu Thanks for mirroring Debian and best regards, Thank you and best regards to you as well. Oscar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#339624: bottirus
Pop 2 pills, watch you dick grow in just 1 month, 3 inches in 3 months http://cranfishes.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#455292: RFP: sagemath -- SAGE is a computer algebra system written in python.
Package: wnpp Severity: wishlist * Package name: sagemath Version : 2.8.15 * URL : http://www.sagemath.org/ * License : GPL Programming Lang: C, Python Description : SAGE is a computer algebra system written in python. SAGE is Software for Algebra and Geometry Experimentation. Is a computer algebra system written in Python, with uses free open source mathematics software. Also it includes interfaces for applications like maxima, octave and many others. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.23genkernel (SMP w/2 CPU cores; PREEMPT) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#330147: Three Steps to the Software You Need at the Prices You Want
Use addr: babloemka. com (remove space) in your browser Microsoft Windows Vista Ultimate $79 Macromedia Flash Professional 8$49 Adobe Premiere 2.0 $59 Corel Grafix Suite X3 $59 Adobe Il1ustrator CS2 $59 Adobe Photoshop CS2 V9.0 $69 Adobe Photoshop CS3 Extended $89 Macromedia Studio 8$99 Autodesk Autocad 2007 $129 Adobe Creative Suite 2$149 Adobe Creative Suite 3 Premium$269 For Mac: Adobe Acrobat Pro 7$69 Adobe After Effects$49 Macromedia Flash Pro 8 $49 Adobe Creative Suite 2 Premium $49 Ableton Live 5.0.1 $49 Adobe Photoshop CS $49 Just copy 'babloemka. com' (w/o space and quotes) in address bar of your browser Frances Catherine stiffened. O The look on Grahams face indic Nay, my lord, it doesnt matter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#45977: Cheap Ad06e Sof+ware
adobe4less . com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#443897: Mlcro5oft + Ado6e t|tles as L0W as 1O$
S*ftware as |ow as 1O$. V1s1t. cheapxpsoft. com . for m0re deta1|s.. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#198658: Shipping Clerk - flexible time work-at-home opening
Our company is looking for energetic and accountable individuals to occupy Shipping Clerk positions throughout the USA. These vacancies are entirely home-based and do not require any travel or relocation. They are also suitable for students and senior citizens who are able to dedicate up to three business hours per day to their duties. No special qualifications are required, although previous shipping or customer service experience is a plus. We are an international company providing mail/internet order opportunities for a global clientele since 1997. We are based in Russia, and also have offices in Latvia and Kazakhstan. Our business provides online/Online Order facilities for those who are unable to benefit from the convenience of e-commerce due to lack of a banking relationship with an internationally recognized bank or because major online vendors will not ship to their location. We have domestic purchasing agents who place the orders on behalf of our clients, and the goods are then shipped to the local shipping clerks for further sorting and international shipment. We also provide escrow services for high amount and/or web auction orders, and offer assistance with customs clearance, if required. Currently, we are looking for individuals to fill in the positions of shipping clerks throughout the USA. Your duties will include receiving, sorting, repackaging and re-sending the orders made on behalf of our clients using the pre-paid USPS shipping labels that you will receive via email. You will be paid $20 for each parcel that you ship, plus $5 for each order that you will need to re-sort or re-package. We will also cover any other authorized expense, such as extra insurance or shipping materials. Your remuneration will be remitted to you via Western Union twice a month. You can expect to handle 5-15 incoming packages weekly, following a 2 week probation period. You can perform your duties from the convenience of your home. You will generally be re-shipping the orders on same day or next day basis, so you will not need to sacrifice your home space to storage. You will only be receiving orders placed with reputable online vendors and delivered by major courier services, such as FedEx and UPS, who pay great attention to ensuring that they are not involved into trafficking any illegal substances or hazardous materials. Thus, there will be no risk on your end. We also encourage you to open and inspect each package that you receive to ensure the legitimacy and safety of itsâ content. In order to fill the shipping clerk position, you need to be aged 18 and above, have a permanent address where you are available on a regular basis and also have access to phone and email. In order to ensure that you can be entrusted the client merchandise, we will need to verify your identity and confirm that you do not have any previous criminal convictions. To apply for this position and for more information on our company, please fax your resume and (optionally) cover letter to: (309) 431-7288. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#139569: photoshop cs3 Our price: US $ 89.95
Adobe Photoshop CS3 Extended $89 Save - $909.05 http://www.skysofte.cn -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#413297: ITP: myhdl-doc -- Documentation for MyHDL
Package: wnpp Owner: Oscar Daniel Diaz [EMAIL PROTECTED] Severity: wishlist * Package name: myhdl-doc Version : 0.5.1 Upstream Author : Jan Decaluwe [EMAIL PROTECTED] * URL : http://myhdl.jandecaluwe.com/ * License : LGPL Programming Lang: Python Description : Documentation for MyHDL MyHDL is an Python package that lets you go from Python to silicon. With MyHDL, you can use Python as a hardware description and verification language. Furthermore, you can convert implementation-oriented MyHDL code to Verilog automatically, and take it to a silicon implementation from there. This is the documentation package for MyHDL. -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.20 Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#407931: fusesmb error with scp
[EMAIL PROTECTED]:~/smb/DOMAIN/SRV1/share$ scp [EMAIL PROTECTED]:fulldump.gz . fulldump.gz 100% 777KB 155.4KB/s 00:05 ./fulldump.gz: truncate: Operation not supported The file is perfectly OK. I was able to uncompress it without errors. This is the very same error I got with the openoffice issue already reported. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#408396: timer-applet: No sound when timer finishes
Package: timer-applet Version: 1.3.1-1 Severity: normal I cannot get any sound alert when a timer finishes. I've tried it with and without esd running. I've tried it when it was the only sound program running. I've tried it with the default sound and with a custom sound. I can't see any way to get a sound alert when an alarm finishes. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages timer-applet depends on: ii gconf2 2.16.0-3 GNOME configuration database syste ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-01.12.3-1 The ATK accessibility toolkit ii libbonobo2-0 2.14.0-3 Bonobo CORBA interfaces library ii libbonoboui2-0 2.14.0-5 The Bonobo UI library ii libc6 2.3.6.ds1-9 GNU C Library: Shared libraries ii libcairo2 1.2.4-4 The Cairo 2D vector graphics libra ii libdbus-1-31.0.2-1 simple interprocess messaging syst ii libdbus-glib-1-2 0.71-3simple interprocess messaging syst ii libfontconfig1 2.4.2-1 generic font configuration library ii libgconf2-42.16.0-3 GNOME configuration database syste ii libglib2.0-0 2.12.6-2 The GLib library of C routines ii libgnome-keyring0 0.6.0-3 GNOME keyring services library ii libgnome2-02.16.0-2 The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.14.0-2 A powerful object-oriented display ii libgnomeui-0 2.14.1-2 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.14.2-4 GNOME virtual file-system (runtime ii libgtk2.0-02.8.20-3 The GTK+ graphical user interface ii libice61:1.0.1-2 X11 Inter-Client Exchange library ii libnotify1 0.4.3-1 sends desktop notifications to a n ii liborbit2 1:2.14.4-1libraries for ORBit2 - a CORBA ORB ii libpanel-applet2-0 2.14.3-4 library for GNOME 2 panel applets ii libpango1.0-0 1.14.8-4 Layout and rendering of internatio ii libpopt0 1.10-3lib for parsing cmdline parameters ii libsm6 1:1.0.1-3 X11 Session Management library ii libx11-6 2:1.0.3-4 X11 client-side library ii libxcursor11.1.7-4 X cursor management library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.1-5 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-4 X11 Input extension library ii libxinerama1 1:1.0.1-4.1 X11 Xinerama extension library ii libxml22.6.27.dfsg-1 GNOME XML library ii libxrandr2 2:1.1.0.2-5 X11 RandR extension library ii libxrender11:0.9.1-3 X Rendering Extension client libra timer-applet recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#408395: nant: NAnt should depend on mono-gmcs
Package: nant Version: 0.85-1 Severity: normal Without mono-gmcs installed, nant complains that it can't find: /usr/lib/pkgconfig/../../lib/mono/2.0/gmcs.exe for default builds. It can be used with mcs using the flag -t:mono-1.0, but it seems that either the default profile should be mono-1.0, or it should depend on mono-gmcs. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages nant depends on: ii libc62.3.6.ds1-9 GNU C Library: Shared libraries ii libmono-corlib1.0-cil1.2.2.1-1 Mono core library (1.0) ii libmono-corlib2.0-cil1.2.2.1-1 Mono core library (2.0) ii libmono-dev 1.2.2.1-1 libraries for the Mono JIT - Devel ii libmono-sharpzip0.84-cil 1.2.2.1-1 Mono SharpZipLib library ii libmono-system-web2.0-cil1.2.2.1-1 Mono System.Web Library ii libmono-system1.0-cil1.2.2.1-1 Mono System libraries (1.0) ii libmono-system2.0-cil1.2.2.1-1 Mono System libraries (2.0) ii libmono-winforms1.0-cil 1.2.2.1-1 Mono System.Windows.Forms library ii libnunit2.2.6-cil2.2.8-1 Unit test framework for .NET ii mono-runtime 1.2.2.1-1 Mono runtime ii pkg-config 0.21-1 manage compile and link flags for nant recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#407931: openoffice misbehaves over fusesmb mounts
Package: fusesmb Version: 0.8.5-1 Severity: important When saving spreadsheet as Excel file I get the following error: Error saving the document test.ods: General input/output error while accessing /home/user/smb/DOMAIN/SERVER/SHARE/test.xls With .ods it works OK. So I expect the converter/output filter does something fusesmb cannot take. Don't be afraid to redirect me if you feel this bugreport should be reported elsewhere. thanks -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18 Locale: LANG=C, LC_CTYPE=hu_HU (charmap=ISO-8859-2) Versions of packages fusesmb depends on: ii fuse-utils 2.5.3-4.2Filesystem in USErspace (utilities ii libc6 2.3.6.ds1-10 GNU C Library: Shared libraries ii libfuse22.5.3-4.2Filesystem in USErspace library ii libsmbclient3.0.23d-4shared library that allows applica fusesmb recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#391867: port is slow to respond on computer with SATA disk
Hullo I am having the same problem. I built a kernel from the sources here: http://people.debian.org/~nobse/kernel/linux-2.6/i386/ The problem is less severe but still a showstopper for production use. I too am looking forward to getting this fixed. When I user dd to fill one of the partitions I still triggered the error. I was able to fill disk without errors once. Then when I was removing the test file it triggered. It's a 10GB file. Here is the log: Jan 8 13:35:49 raidserver kernel: process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT Jan 8 13:37:02 raidserver kernel: ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen Jan 8 13:37:02 raidserver kernel: ata2.00: tag 0 cmd 0x61 Emask 0x4 stat 0x40 err 0x0 (timeout) Jan 8 13:37:02 raidserver kernel: ata2: soft resetting port Jan 8 13:37:02 raidserver kernel: ata2: softreset failed (1st FIS failed) Jan 8 13:37:02 raidserver kernel: ata2: softreset failed, retrying in 5 secs Jan 8 13:37:02 raidserver kernel: ata2: hard resetting port Jan 8 13:37:02 raidserver kernel: ata2: port is slow to respond, please be patient Jan 8 13:37:02 raidserver kernel: ata2: port failed to respond (30 secs) Jan 8 13:37:02 raidserver kernel: ata2: COMRESET failed (device not ready) Jan 8 13:37:02 raidserver kernel: ata2: hardreset failed, retrying in 5 secs Jan 8 13:37:02 raidserver kernel: ata2: hard resetting port Jan 8 13:37:02 raidserver kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jan 8 13:37:02 raidserver kernel: ata2.00: configured for UDMA/133 Jan 8 13:37:02 raidserver kernel: ata2: EH complete Jan 8 13:37:02 raidserver kernel: SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB) Jan 8 13:37:02 raidserver kernel: sdc: Write Protect is off Jan 8 13:37:02 raidserver kernel: sdc: Mode Sense: 00 3a 00 00 Jan 8 13:37:02 raidserver kernel: SCSI device sdc: drive cache: write back Jan 8 13:54:07 raidserver kernel: ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen Jan 8 13:54:07 raidserver kernel: ata2.00: tag 0 cmd 0x61 Emask 0x4 stat 0x40 err 0x0 (timeout) Jan 8 13:54:07 raidserver kernel: ata2: soft resetting port Jan 8 13:54:07 raidserver kernel: ata2: softreset failed (1st FIS failed) Jan 8 13:54:07 raidserver kernel: ata2: softreset failed, retrying in 5 secs Jan 8 13:54:07 raidserver kernel: ata2: hard resetting port Jan 8 13:54:07 raidserver kernel: ata2: port is slow to respond, please be patient Jan 8 13:54:07 raidserver kernel: ata2: port failed to respond (30 secs) Jan 8 13:54:07 raidserver kernel: ata2: COMRESET failed (device not ready) Jan 8 13:54:07 raidserver kernel: ata2: hardreset failed, retrying in 5 secs Jan 8 13:54:07 raidserver kernel: ata2: hard resetting port Jan 8 13:54:07 raidserver kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jan 8 13:54:07 raidserver kernel: ata2.00: configured for UDMA/133 Jan 8 13:54:07 raidserver kernel: ata2: EH complete Jan 8 13:54:07 raidserver kernel: SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB) Jan 8 13:54:07 raidserver kernel: sdc: Write Protect is off Jan 8 13:54:07 raidserver kernel: sdc: Mode Sense: 00 3a 00 00 Jan 8 13:54:07 raidserver kernel: SCSI device sdc: drive cache: write back Jan 8 13:54:56 raidserver kernel: ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen Jan 8 13:54:59 raidserver kernel: ata2.00: tag 0 cmd 0x61 Emask 0x4 stat 0x40 err 0x0 (timeout) Jan 8 13:55:35 raidserver kernel: ata2: soft resetting port Jan 8 13:55:35 raidserver kernel: ata2: softreset failed (1st FIS failed) Jan 8 13:55:35 raidserver kernel: ata2: softreset failed, retrying in 5 secs Jan 8 13:55:35 raidserver kernel: ata2: hard resetting port Jan 8 13:55:35 raidserver kernel: ata2: port is slow to respond, please be patient Jan 8 13:55:35 raidserver kernel: ata2: port failed to respond (30 secs) Jan 8 13:55:35 raidserver kernel: ata2: COMRESET failed (device not ready) Jan 8 13:55:35 raidserver kernel: ata2: hardreset failed, retrying in 5 secs Jan 8 13:55:35 raidserver kernel: ata2: hard resetting port Jan 8 13:55:35 raidserver kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jan 8 13:55:35 raidserver kernel: ata2.00: configured for UDMA/133 Jan 8 13:55:35 raidserver kernel: ata2: EH complete Jan 8 13:55:35 raidserver kernel: SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB) Jan 8 13:55:35 raidserver kernel: sdc: Write Protect is off Jan 8 13:55:35 raidserver kernel: sdc: Mode Sense: 00 3a 00 00 Jan 8 13:55:35 raidserver kernel: SCSI device sdc: drive cache: write back Jan 8 13:59:36 raidserver kernel: ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen Jan 8 13:59:36 raidserver kernel: ata1.00: tag 0 cmd 0x61 Emask 0x4 stat 0x40 err 0x0 (timeout) Jan 8 14:00:18 raidserver kernel: ata1: soft resetting port Jan 8 14:00:18 raidserver kernel: ata1: softreset failed (1st FIS failed) Jan 8 14:00:18 raidserver kernel: ata1:
Bug#404451: [listacnt] Debian en galego
I'm interested in this list -- Óscar Casal Sánchez Dpto. Electrónica y Computación Universidad de Santiago de Compostela Tfno: +981563100 Ext 13568
Bug#51450: Oscar says Hi
Our educational counselors are recruiting new people for our home degree program. We are running this program as an experiment and we feel you may qualify. This program will earn you a fully qualified degree, with transcripts. Currently we are recruiting people with vast knowledge or experience in the field/trade of their choice. Give our recruiting office a call when you have time. Thanks Oscar Cooper Office Number: 1-773-509-4920 We hope to be talking to you soon. *We are taking calls at anytime in the day or evening. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#391970: gaim dependency on gaim-data seems to be incorrect
Package: gaim Version: 1:1.5.0+1.5.1cvs20051015-6 Severity: grave Justification: renders package unusable gaim now depends on =gaim-data 1:2.0.0+beta3.1-4 but gaim-data 1:2.0.0+beta3.1-5 is in unstable. So, currently, gaim cannot be installed on my system. I guess it should depend on = gaim-data 1:2.0.0+beta3.1-4 (or perhaps an even lower version number). -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages gaim depends on: ii gaim-data 1:2.0.0+beta3.1-5 multi-protocol instant messaging c ii libao2 0.8.6-4 Cross Platform Audio Output Librar ii libaspell150.60.4-4 GNU Aspell spell-checker runtime l ii libatk1.0-01.12.3-1 The ATK accessibility toolkit ii libaudiofile0 0.2.6-6 Open-source version of SGI's audio ii libc6 2.3.6.ds1-6 GNU C Library: Shared libraries ii libcairo2 1.2.4-1 The Cairo 2D vector graphics libra ii libfontconfig1 2.4.1-2 generic font configuration library ii libgcrypt111.2.3-2 LGPL Crypto library - runtime libr ii libglib2.0-0 2.12.4-1 The GLib library of C routines ii libgnutls131.4.4-1 the GNU TLS library - runtime libr ii libgtk2.0-02.8.20-2 The GTK+ graphical user interface ii libgtkspell0 2.0.10-3+b1 a spell-checking addon for GTK's T ii libice61:1.0.1-2 X11 Inter-Client Exchange library ii libpango1.0-0 1.14.5-1 Layout and rendering of internatio ii libsm6 1:1.0.1-3 X11 Session Management library ii libstartup-notificatio 0.8-2 library for program launch feedbac ii libx11-6 2:1.0.0-9 X11 client-side library ii libxcursor11.1.7-4 X cursor management library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.1-4 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-3 X11 Input extension library ii libxinerama1 1:1.0.1-4.1 X11 Xinerama extension library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender11:0.9.1-3 X Rendering Extension client libra ii libxss11:1.0.1-4 X11 Screen Saver extension library gaim recommends no packages. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#388468: offlineimap: I think this is an ssh issue
Package: offlineimap Followup-For: Bug #388468 After looking into this more, I was using offlineimap over an ssh connection. All ssh connections to this machine later became very unreliable (i.e. they would stall and block indefinitely). I'm not sure why. In any case, after rebooting the remote machine, I have not seen the problem return. I think it is safe to close this bug report. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages offlineimap depends on: ii python2.4.3-11 An interactive high-level object-o ii python-support0.5.3 automated rebuilding support for p offlineimap recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#159682: Please report back to me
Good Day; Thanks for contacting us regarding our newest (w)eight (s)uppressant. Wanting to lose 20-25(Ibs) in 2 weeks is possible, but can be dangerous. With a proper (d)iet and our latest version of (H)oodialife you will see surprising results. Our newest version of (H)oodialife has been released on our (W)ebsite below: http://097.onesoupsagain.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#188375: I am happy to announce
Sorry for taking so long to reply. We are sorry to inform you that our product is still not in stores. Currently we are only offering it on our product website and plan on having it in stores come November 2006. As mentioned Dr. Bliss is still recommending a 4 month supply for best results. If you have anymore health concerns then feel free to send me an email. Below I have posted our site for further info. Company Website: http://097.muggadget.com Denis Staton -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#388808: php5: disabling session.gc_probability prevents garbage collection if alternate session.save_path is used
Package: php5 Version: 5.1.6-0.dotdeb.2 Severity: minor If your php script or application uses a different session.save_path without also setting session.gc_probability to non-zero, old sessions will not be deleted, since garbage colleciton won't run. The comments around session.gc_divisor should be amended to make sys admins aware of this. Something along the lines of: ; This is disabled in the Debian packages, due to the strict permissions ; on /var/lib/php5. Instead of setting this here, see the cronjob at ; /etc/cron.d/php5, which uses the session.gc_maxlifetime setting below ; If your php scripts use their own session.save_path, either make sure they ; enable garbage collection by setting session.gc_probability or globally ; enable it here. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-em64t-p4-smp Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages php5 depends on: ii libapache2-mod-php5 5.1.6-0.dotdeb.2 PHP 5 scripting language - apache ii php5-common 5.1.6-0.dotdeb.2 Common files for packages built fr php5 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#388674: facturalux: There should be a dependency on libqt3-mt-psql.
Package: facturalux Version: 0.4-11 Severity: important If this library is not installed, facturalux won't connect to postgres. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (900, 'testing'), (890, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17.13vrlap0 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages facturalux depends on: ii debconf 1.5.3Debian configuration management sy ii libaudio2 1.8-2The Network Audio System (NAS). (s ii libc6 2.3.6.ds1-4 GNU C Library: Shared libraries ii libfontconfig1 2.4.1-2 generic font configuration library ii libfreetype62.2.1-5 FreeType 2 font engine, shared lib ii libgcc1 1:4.1.1-13 GCC support library ii libice6 1:1.0.1-2X11 Inter-Client Exchange library ii libjpeg62 6b-13The Independent JPEG Group's JPEG ii libpng12-0 1.2.8rel-5.2 PNG library - runtime ii libqt3-mt 3:3.3.6-4Qt GUI Library (Threaded runtime v ii libsm6 1:1.0.1-2X11 Session Management library ii libstdc++6 4.1.1-13 The GNU Standard C++ Library v3 ii libx11-62:1.0.0-8X11 client-side library ii libxcursor1 1.1.7-4 X cursor management library ii libxext61:1.0.1-2X11 miscellaneous extension librar ii libxft2 2.1.8.2-8FreeType-based font drawing librar ii libxi6 1:1.0.1-3X11 Input extension library ii libxinerama11:1.0.1-4.1 X11 Xinerama extension library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender1 1:0.9.1-3X Rendering Extension client libra ii libxt6 1:1.0.2-2X11 toolkit intrinsics library ii postgresql-8.1 8.1.4-6 object-relational SQL database, ve ii zlib1g 1:1.2.3-13 compression library - runtime facturalux recommends no packages. -- debconf information: * facturalux/databasenote: facturalux/manualdbpurge: facturalux/purgedbquestion: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#388468: offlineimap: seems to deadlock on sync
Package: offlineimap Version: 4.0.14 Severity: important Since upgrading to 4.0.14, synchronization will often lock up and never seem to return. I can interrupt with control-C, which prints the following: Main program terminated with exception: Traceback (most recent call last): File /var/lib/python-support/python2.4/offlineimap/init.py, line 145, in startup threadutil.exitnotifymonitorloop(threadutil.threadexited) File /var/lib/python-support/python2.4/offlineimap/threadutil.py, line 118, in exitnotifymonitorloop exitcondition.wait(1) File threading.py, line 222, in wait _sleep(delay) KeyboardInterrupt No debug messages were logged for MainThread. === In the mean time, the package does not seem usable. I'm trying to find a deb of the previous version. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages offlineimap depends on: ii python2.4.3-11 An interactive high-level object-o ii python-support0.5.1 automated rebuilding support for p offlineimap recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#388469: offlineimap: version 4.0.14 (debian package version) thinks it is version 4.0.13
Package: offlineimap
Version: 4.0.14
Severity: minor
I have version 4.0.14 installed, but the banner prints 4.0.13 and if I
do `cat /usr/bin/offlineimap` I get:
from offlineimap import init
init.startup('4.0.13')
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-1-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages offlineimap depends on:
ii python2.4.3-11 An interactive high-level object-o
ii python-support0.5.1 automated rebuilding support for p
offlineimap recommends no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#387693: ITP: myhdl -- Python module to use Python as a Hardware Description Language
Package: wnpp Severity: wishlist Owner: Oscar Daniel Diaz [EMAIL PROTECTED] * Package name: myhdl Version : 0.5.1 Upstream Author : Jan Decaluwe [EMAIL PROTECTED] * URL : http://myhdl.jandecaluwe.com/ * License : LGPL Programming Lang: Python Description : Python module to use Python as a Hardware Description Language MyHDL is an open source Python package that lets you go from Python to silicon. With MyHDL, you can use Python as a hardware description and verification language. Furthermore, you can convert implementation-oriented MyHDL code to Verilog automatically, and take it to a silicon implementation from there. MyHDL also offers all the Python power to make simulations and verifications beyond the conventional way. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-athlon64 Locale: LANG=es_CO, LC_CTYPE=es_CO (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#375496: Time plan?
Hi. Not to be a PITA but is there a time plan for the official packages? I'm thinking about using Karl-Heinz packages but if the official packages are about to be released soon I don't think I will. I'd prefer to use the official if possible. Oscar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#378881: last-exit: Won't start due to failure to find volume GConf key
Package: last-exit Version: 1.0-1 Severity: important When I start last-exit I see the following: === Unhandled Exception: GConf.NoSuchKeyException: Key '/apps/lastexit/volume' not found in GConf in 0x000e1 GConf.Client:Get (System.String key) in 0x00017 LastExit.Config:get_Volume () in 0x00247 LastExit.PlayerWindow:SetupButtons () in 0x0014f LastExit.PlayerWindow:.ctor () in 0x0020d LastExit.Driver:Main (System.String[] args) === When I looked in gconf with gconf editor, there was a volume key. When I checked the /apps/last-exit/first_run key, it started correctly. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-k7 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages last-exit depends on: ii gconf2 2.14.0-1 GNOME configuration database syste ii libatk1.0-01.11.4-2 The ATK accessibility toolkit ii libc6 2.3.6-9 GNU C Library: Shared libraries ii libcairo2 1.2.0-3 The Cairo 2D vector graphics libra ii libfontconfig1 2.3.2-5.1 generic font configuration library ii libgconf2-42.14.0-1 GNOME configuration database syste ii libgconf2.0-cil2.8.2-2 CLI binding for GConf 2.12 ii libglade2.0-cil2.8.2-2 CLI binding for the Glade librarie ii libglib2.0-0 2.10.2-2 The GLib library of C routines ii libglib2.0-cil 2.8.2-2 CLI binding for the GLib utility l ii libgnome2.0-cil2.8.2-2 CLI binding for GNOME 2.12 ii libgstreamer0.10-0 0.10.9-1 Core GStreamer libraries and eleme ii libgtk2.0-02.8.17-2 The GTK+ graphical user interface ii libgtk2.0-cil 2.8.2-2 CLI binding for the GTK+ toolkit 2 ii libmono-corlib1.0-cil 1.1.13.6-4Mono core library (1.0) ii libmono-system-web1.0-cil 1.1.13.6-4Mono System.Web library ii libmono-system1.0-cil 1.1.13.6-4Mono System libraries (1.0) ii libmono1.0-cil 1.1.13.6-4Mono libraries (1.0) ii liborbit2 1:2.14.0-1libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.12.3-1 Layout and rendering of internatio ii libx11-6 2:1.0.0-6 X11 client-side library ii libxcursor11.1.5.2-5 X cursor management library ii libxext6 1:1.0.0-4 X11 miscellaneous extension librar ii libxfixes3 1:3.0.1.2-4 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.0-5 X11 Input extension library ii libxinerama1 1:1.0.1-4 X11 Xinerama extension library ii libxml22.6.26.dfsg-2 GNOME XML library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender11:0.9.0.2-4 X Rendering Extension client libra ii mono-runtime 1.1.13.6-4Mono runtime last-exit recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363913: patch to fix bug.
Attached it a patch which fixes the bug for me. The problem is that there is (for me and I believe the original submitter) a section in the configuration which does not have the Default option. This triggers an exception in the Configuration parser. I just added a check to verify that the option was there prior to getting it. I have attached a patch to fix the bug. PS: this is a great thing about having python software in Debian, one always has the source code so it is very convenient to look for the bug. Best, -- P. Oscar Boykin http://boykin.acis.ufl.edu Assistant Professor, Department of Electrical and Computer Engineering University of Florida --- mozilla.py.bak 2006-05-05 09:33:38.0 -0400 +++ mozilla.py 2006-05-05 09:48:21.0 -0400 @@ -37,7 +37,7 @@ path = None for section in config.sections(): - if config.get (section, Default) == 1: + if config.has_option(section, Default) and config.get (section, Default) == 1: path = config.get (section, Path) break elif path == None and config.has_option(section, Path):
Bug#102921: Kind Attn: patrick etie, App.roval
Hey, We Have received your filled application. http://geocities.com/StellaOlson8265 Please hit the site above, Our office shall then re-confirm your data. With Ref to: patrick etie and your histroy is not an issue. All debt consol types have been Ap prove d for you patrick etie say never: http://geocities.com/KristineBeasley8026/a.htm Goodbye, Oscar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#101800: Build muscle, lose we!ght
nd morality. However, his article is a reply to Williams paper on the same topic.Therefore, Na nd. A Turkish invasion threatened Europe and Poland entered into an alliance with the www.yzjkem.org/ht9/ is the place to make disappear those pds. compass, and he often marvelled at his uncle's explanations of algebra. Although young Albert was intrigu the most important characters next to George and Lennie, Steinbeck doesn't give her a real -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#189809: Get [M]-[e]-[d]-[s] online
Oscar Marquez was looking for a supplier for [L]-[e]-[v]-[i]-[t]-[r]-[a] avalable^ [C]-[i]-[a]-[l]-[i]-[s] [V]-[i]-[a]-[g]-[r]-[a] No; Pres-[c]-[r]-[i]-[p]-[t]-ion [B]-est [M]-[e]ds http://kentonvrau7gu9dtd9d4c807p08sp0c7p7.japingfg.com/?nno ;R-e-m-ov[a]-[l] http://bbkyvhfzdh8gumbbmuetmybbb.japingfg.com/i?drccb -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#75181: snazzy teenn babe suck schlong then taking it up the gash.
Elloelloello :) She had never been slipped the dark meat in her pink pussy before so she was quite eager to accept it. http://simigynilufo.com/view.cgi?s=aaam=CEIBI.iPdR,gfibjW,VSd -- Best regards, Oscar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#323447: gstreamer0.8-alsa: audio constantly clicks when alsa is selected as playback
Package: gstreamer0.8-alsa Version: 0.8.10-1 Severity: important alsa output in gstreamer clicks constantly when playing. If I use oss output this is not the case. If I use alsaplayer (which uses alsa output) this is not the case. I am using the snd_intel8x0 driver on an IBM t42 laptop. It worked fine until a recent update (so a previous package was working properly). -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages gstreamer0.8-alsa depends on: ii libasound2 1.0.9-3 ALSA library ii libc6 2.3.2.ds1-22 GNU C Library: Shared libraries an ii libglib2.0-02.6.5-1 The GLib library of C routines ii libgstreamer-plugins0.8-0 0.8.10-1 Various GStreamer libraries and li ii libgstreamer0.8-0 0.8.10-2 Core GStreamer libraries, plugins, ii libxml2 2.6.20-1 GNOME XML library ii zlib1g 1:1.2.3-1compression library - runtime gstreamer0.8-alsa recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#322952: evince: crashes looking for wrong verision of libdjvulibre
Package: evince Version: 0.3.0-2 Severity: grave Justification: renders package unusable Evince reports: evince: error while loading shared libraries: libdjvulibre.so.14: cannot open shared object file: No such file or directory While the it seems that only libdjvulibre.so.15 is installed. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-k7 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages evince depends on: ii gconf22.10.1-1 GNOME configuration database syste ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-0 1.10.1-2 The ATK accessibility toolkit ii libaudiofile0 0.2.6-6Open-source version of SGI's audio ii libbonobo2-0 2.10.0-1 Bonobo CORBA interfaces library ii libbonoboui2-02.10.0-1 The Bonobo UI library ii libc6 2.3.5-3GNU C Library: Shared libraries an ii libcairo1 0.4.0-1Multi-platform 2D graphics library ii libdjvulibre1 3.5.14-6 Runtime support for the DjVu image ii libesd0 0.2.36-1 Enlightened Sound Daemon - Shared ii libfontconfig12.3.2-1generic font configuration library ii libfreetype6 2.1.10-1 FreeType 2 font engine, shared lib ii libgcc1 1:4.0.1-3 GCC support library ii libgconf2-4 2.10.1-1 GNOME configuration database syste ii libgcrypt11 1.2.1-4LGPL Crypto library - runtime libr ii libglade2-0 1:2.5.1-2 library to load .glade files at ru ii libglib2.0-0 2.6.6-1The GLib library of C routines ii libgnome-keyring0 0.4.3-1GNOME keyring services library ii libgnome2-0 2.10.1-1 The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.10.2-2 A powerful object-oriented display ii libgnomeprint2.2-02.10.3-2 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.10.2-2 GNOME 2.2 print architecture User ii libgnomeui-0 2.10.1-1 The GNOME 2 libraries (User Interf ii libgnomevfs2-02.10.1-5 The GNOME virtual file-system libr ii libgnutls11 1.0.16-13.1GNU TLS library - runtime library ii libgpg-error0 1.1-4 library for common error values an ii libgtk2.0-0 2.6.9-1The GTK+ graphical user interface ii libice6 6.8.2.dfsg.1-4 Inter-Client Exchange library ii libjpeg62 6b-10 The Independent JPEG Group's JPEG ii libkpathsea3 2.0.2-31 path search library for teTeX (run ii liborbit2 1:2.12.2-3 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.8.2-1Layout and rendering of internatio ii libpixman10.1.6-1Cairo pixel manipulation library ii libpng12-01.2.8rel-1 PNG library - runtime ii libpoppler0 0.3.1-1PDF rendering library ii libpoppler0-glib 0.3.1-1PDF rendering library (GLib-based ii libpopt0 1.7-5 lib for parsing cmdline parameters ii libsm66.8.2.dfsg.1-4 X Window System Session Management ii libstdc++51:3.3.6-7 The GNU Standard C++ Library v3 ii libtasn1-20.2.13-1 Manage ASN.1 structures (runtime) ii libx11-6 6.8.2.dfsg.1-4 X Window System protocol client li ii libxml2 2.6.20-1 GNOME XML library ii libxrender1 1:0.9.0-2 X Rendering Extension client libra ii xlibs 6.8.2.dfsg.1-4 X Window System client libraries m ii zlib1g1:1.2.3-3 compression library - runtime evince recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#65482: Microsoft and IBM OEM Software for Bundling Only and other related software.
Rock bottom prices on top selling titles! http://cds.6va3rn6hly6vl7o.ackharwarln.com Health food makes me sick. One more drink and I'll be under the host. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#118337: Top Notch Financing with ease
Good day to you sir, 118712, you have been pre-app.roved for a $326,000 Home Loann at a 3.93% Fix.ed R.ate. Just v.is.it the linkk below and Com_plete the The 1 minute Ins.tant Appr.oval For.m http://allis.alldayfinance.com/1028/ Id# cbigrnd (118712) Toby Walker Regional CEO The path that I have opted for, either leads to freedom or death. But believe me, we will be free soon. We will through this blood-polluted system out of our lives for ever and then good times will come. I took off again to my destination. I knew after that incident Mia was very upset but I was doing all this for her, wasn't I? When the red sun was set, a bright new sun rose at us with a shining light. Its sunlight wasn't red. It didn't pinch. It shone to give us relief and warmth. But with the passage of time this sun also started throwing its -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#315311: evince: printing always sends a4 paper size (despite gnome-printer settings)
Package: evince Version: 0.3.0-2 Severity: normal Anytime I print an A4 size paper seems to be used, which my printer cannot handle. Sending the same job to the printer using lpr or xpdf seems to work. I believe evince uses the gnome-printing libraries, and the configuration for that appears to be Paper size: US Letter. Evince itself does not seem to have any options for setting paper size. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.10-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages evince depends on: ii gconf2 2.8.1-6 GNOME configuration database syste ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libatk1.0-0 1.8.0-4 The ATK accessibility toolkit ii libaudiofile00.2.6-6 Open-source version of SGI's audio ii libbonobo2-0 2.8.1-2 Bonobo CORBA interfaces library ii libbonoboui2-0 2.8.1-2 The Bonobo UI library ii libc62.3.2.ds1-22GNU C Library: Shared libraries an ii libcairo10.4.0-1 Multi-platform 2D graphics library ii libdjvulibre13.5.14-5Runtime support for the DjVu image ii libesd0 0.2.35-2.1 Enlightened Sound Daemon - Shared ii libfontconfig1 2.3.2-1 generic font configuration library ii libfreetype6 2.1.7-2.4 FreeType 2 font engine, shared lib ii libgcc1 1:3.4.3-13 GCC support library ii libgconf2-4 2.8.1-6 GNOME configuration database syste ii libgcrypt11 1.2.0-11.1 LGPL Crypto library - runtime libr ii libglade2-0 1:2.4.2-2 library to load .glade files at ru ii libglib2.0-0 2.6.4-1 The GLib library of C routines ii libgnome-keyring00.4.2-1 GNOME keyring services library ii libgnome2-0 2.8.1-2 The GNOME 2 library - runtime file ii libgnomecanvas2-02.8.0-1 A powerful object-oriented display ii libgnomeprint2.2-0 2.8.2-1 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.8.2-2 GNOME 2.2 print architecture User ii libgnomeui-0 2.8.1-3 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.8.4-4 The GNOME virtual file-system libr ii libgnutls11 1.0.16-13.1 GNU TLS library - runtime library ii libgpg-error01.0-1 library for common error values an ii libgtk2.0-0 2.6.4-3 The GTK+ graphical user interface ii libice6 4.3.0.dfsg.1-13 Inter-Client Exchange library ii libjpeg626b-10 The Independent JPEG Group's JPEG ii libkpathsea3 2.0.2-30path search library for teTeX (run ii liborbit21:2.12.2-1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-01.8.1-1 Layout and rendering of internatio ii libpixman1 0.1.4-2 Cairo pixel manipulation library ii libpng12-0 1.2.8rel-1 PNG library - runtime ii libpoppler0 0.3.1-1 PDF rendering library ii libpoppler0-glib 0.3.1-1 PDF rendering library (GLib-based ii libpopt0 1.7-5 lib for parsing cmdline parameters ii libsm6 4.3.0.dfsg.1-13 X Window System Session Management ii libstdc++5 1:3.3.6-5 The GNU Standard C++ Library v3 ii libtasn1-2 0.2.10-4Manage ASN.1 structures (runtime) ii libx11-6 4.3.0.dfsg.1-13 X Window System protocol client li ii libxml2 2.6.16-7GNOME XML library ii libxrender1 1:0.8.3-1 X Rendering Extension client libra ii xlibs4.3.0.dfsg.1-13 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-4 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#70572: Get yourself back on track today!
Large natural erection! http://jbvqurew.vsgohevoand3zwv.kanteletarnk.com Great deeds are usually wrought at great risks. Success has made failures of many men. Believing where we cannot prove. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#155752: Quality software at low prices - on time and hassle free.
Your electronics shopping alternative. http://rvnsje.sze7dral7kazpta.deservedlyma.com Everywhere is walking distance if you have the time. Wear the old coat and buy the new book. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#76918: Get software cds and download under $15-$99
Any Software just in under $15-$99, Xp-adobe etc http://epmol.ova39n6zlg6dl7o.solesbikje.com Freedom is nothing else but a chance to be better. A truly elegant taste is generally accompanied with excellency of heart. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#306676: evince crashes on load of given pdf
Package: evince Version: 0.1.5-2 Severity: important The pdf at this URL: http://www.cs.wisc.edu/~isca2005/papers/04A-01.PDF crashes evince immediately on load for me. xpdf can load it, but it gives a console warning: Error: Bad annotation destination -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.10-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages evince depends on: ii gconf2 2.8.1-5 GNOME configuration database syste ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libatk1.0-0 1.8.0-4 The ATK accessibility toolkit ii libaudiofile00.2.6-6 Open-source version of SGI's audio ii libbonobo2-0 2.8.1-2 Bonobo CORBA interfaces library ii libbonoboui2-0 2.8.1-2 The Bonobo UI library ii libc62.3.2.ds1-21GNU C Library: Shared libraries an ii libesd0 0.2.35-2Enlightened Sound Daemon - Shared ii libfontconfig1 2.3.1-2 generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgcc1 1:3.4.3-12 GCC support library ii libgconf2-4 2.8.1-5 GNOME configuration database syste ii libgcrypt11 1.2.0-11LGPL Crypto library - runtime libr ii libglade2-0 1:2.4.2-2 library to load .glade files at ru ii libglib2.0-0 2.6.4-1 The GLib library of C routines ii libgnome-keyring00.4.2-1 GNOME keyring services library ii libgnome2-0 2.8.1-2 The GNOME 2 library - runtime file ii libgnomecanvas2-02.8.0-1 A powerful object-oriented display ii libgnomeprint2.2-0 2.8.2-1 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.8.2-2 GNOME 2.2 print architecture User ii libgnomeui-0 2.8.1-3 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.8.4-2 The GNOME virtual file-system libr ii libgnutls11 1.0.16-13 GNU TLS library - runtime library ii libgpg-error01.0-1 library for common error values an ii libgtk2.0-0 2.6.4-1 The GTK+ graphical user interface ii libice6 4.3.0.dfsg.1-12.0.1 Inter-Client Exchange library ii libjpeg626b-10 The Independent JPEG Group's JPEG ii liborbit21:2.12.2-1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-01.8.1-1 Layout and rendering of internatio ii libpopt0 1.7-5 lib for parsing cmdline parameters ii libsm6 4.3.0.dfsg.1-12.0.1 X Window System Session Management ii libstdc++5 1:3.3.5-12 The GNU Standard C++ Library v3 ii libtasn1-2 0.2.10-4Manage ASN.1 structures (runtime) ii libx11-6 4.3.0.dfsg.1-12.0.1 X Window System protocol client li ii libxml2 2.6.16-7GNOME XML library ii xlibs4.3.0.dfsg.1-12 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-4 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#291275: printing crashes planner without libgnomeprint
Package: planner Version: 0.12-3.1 Severity: important Planner does not seem to depend on libgnomeprint2.2-0, but without it installed, pressing the print button will cause planner to crash. (Or, I was able to install planner with apt without having libgnomeprint2.2-0). I guess planner should depend on libgnomeprint2.2-0. Thanks. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.8-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages planner depends on: ii libart-2.0-2 2.3.16-6 Library of functions for 2D graphi ii libatk1.0-0 1.8.0-3The ATK accessibility toolkit ii libaudiofile0 0.2.6-4Open-source version of SGI's audio ii libbonobo2-0 2.8.0-4Bonobo CORBA interfaces library ii libbonoboui2-02.6.1-1The Bonobo UI library ii libbz2-1.01.0.2-1A high-quality block-sorting file ii libc6 2.3.2.ds1-18 GNU C Library: Shared libraries an ii libesd0 0.2.35-2 Enlightened Sound Daemon - Shared ii libfontconfig12.2.3-3generic font configuration library ii libfreetype6 2.1.7-2.2 FreeType 2 font engine, shared lib ii libgconf2-4 2.8.1-4GNOME configuration database syste ii libgcrypt11 1.2.0-10 LGPL Crypto library - runtime libr ii libgda2-1 1.0.4-1GNOME Data Access library for GNOM ii libglade2-0 1:2.4.0-1 Library to load .glade files at ru ii libglib2.0-0 2.4.7-1The GLib library of C routines ii libgnome-keyring0 0.4.0-2GNOME keyring services library ii libgnome2-0 2.8.0-6The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.6.1.1-2 A powerful object-oriented display ii libgnomeprint2.2-02.8.2-1The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.8.2-1The GNOME 2.2 print architecture U ii libgnomeui-0 2.8.0-3The GNOME 2 libraries (User Interf ii libgnomevfs2-02.8.3-8The GNOME virtual file-system libr ii libgnutls11 1.0.16-9 GNU TLS library - runtime library ii libgpg-error0 1.0-1 library for common error values an ii libgsf-1 1.11.1-1 Structured File Library - runtime ii libgtk2.0-0 2.4.13-1 The GTK+ graphical user interface ii libice6 4.3.0.dfsg.1-8 Inter-Client Exchange library ii libjpeg62 6b-9 The Independent JPEG Group's JPEG ii liborbit2 1:2.10.2-1.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.6.0-3Layout and rendering of internatio ii libpopt0 1.7-5 lib for parsing cmdline parameters ii libsm64.3.0.dfsg.1-8 X Window System Session Management ii libtasn1-20.2.10-4 Manage ASN.1 structures (runtime) ii libx11-6 4.3.0.dfsg.1-8 X Window System protocol client li ii libxml2 2.6.11-5 GNOME XML library ii libxslt1.11.1.8-5XSLT processing library - runtime ii scrollkeeper 0.3.14-9.1 A free electronic cataloging syste ii shared-mime-info 0.15-1 FreeDesktop.org shared MIME databa ii xlibs 4.3.0.dfsg.1-8 X Window System client libraries m ii zlib1g1:1.2.2-3 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
