Bug#1040185: firmware-amd-graphics: Older DMCUB firmware for AMDPU causes some panels to hang irrecoverably when PSR is enabled

[Gabriel Wayne]

Package: firmware-amd-graphics
Version: 20230210-5
Severity: important
Tags: patch upstream
X-Debbugs-Cc: linux.footwork...@simplelogin.com

Dear Maintainer,

Rembrandt GPUs in combination with certain Parade TCONs are suffering from
irrecoverable system hangs when PSR is enabled (as it is by default). There is
a Gitlab ticket for this issue here:
https://gitlab.freedesktop.org/drm/amd/-/issues/2443#note_1966723

An upstream firmware patch has landed which mitigates the issue:
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-
firmware.git/commit/amdgpu/yellow_carp_dmcub.bin?id=9dbd8ec28fd810e5f4f9da41452aba74896a5564

Please consider backporting this patch to Bookworm. Thank you very much.


-- System Information:
Debian Release: 12.0
  APT prefers stable-security
  APT policy: (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.1.0-9-amd64 (SMP w/16 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

firmware-amd-graphics depends on no packages.

firmware-amd-graphics recommends no packages.

Versions of packages firmware-amd-graphics suggests:
ii  initramfs-tools  0.142

-- no debconf information

Bug#1040184: xserver-xorg-video-amdgpu: amdgpu causes unrecoverable system hangs on Rembrandt systems with certain laptop panels

[Gabriel Wayne]

Package: xserver-xorg-video-amdgpu
Version: 23.0.0-1
Severity: important
Tags: patch upstream
X-Debbugs-Cc: linux.footwork...@simplelogin.com

Dear Maintainer,

Laptops with Rembrandt GPUs and certain panels are experiencing total and
unrecoverable system hangs with the following error:

amdgpu :04:00.0: [drm] *ERROR* [CRTC:67:crtc-0] flip_done timed out

After this error occurs the panel is completely frozen and a hard reboot is
required in order to recover.

This has been diagnosed as a problem with PRS-SU on some Parade TCONs running
on older firmware. There is a gitlab ticket which references patches confirmed
to fix the problem: https://gitlab.freedesktop.org/drm/amd/-/issues/2443

Please incorporate these patches into the next Debian stable release if
possible. Thank you.


-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.

VGA-compatible devices on PCI bus:
--
04:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. 
[AMD/ATI] Rembrandt [Radeon 680M] [1002:1681] (rev d1)

/etc/X11/xorg.conf does not exist.

Contents of /etc/X11/xorg.conf.d:
-
total 0

/etc/modprobe.d contains no KMS configuration files.

Kernel version (/proc/version):
---
Linux version 6.1.0-9-amd64 (debian-ker...@lists.debian.org) (gcc-12 (Debian 
12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP 
PREEMPT_DYNAMIC Debian 6.1.27-1 (2023-05-08)

No Xorg X server log files found.

udev information:
-
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
M: input5
R: 5
U: input
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PROP=0
E: EV=3
E: KEY=10 0
E: MODALIAS=input:b0019vp0001e-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=1045297
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4
M: event4
R: 4
U: input
D: c 13:68
N: input/event4
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event4
E: MAJOR=13
E: MINOR=68
E: USEC_INITIALIZED=15239001
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:LNXPWRBN/button
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:

P: 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:00/input/input7
M: input7
R: 7
U: input
E: 
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:00/input/input7
E: SUBSYSTEM=input
E: PRODUCT=19/0/6/0
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PROP=0
E: EV=3
E: KEY=3e000b 0 0 0
E: MODALIAS=input:b0019vp0006e-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: USEC_INITIALIZED=1071547
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:

P: 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:00/input/input7/event5
M: event5
R: 5
U: input
D: c 13:69
N: input/event5
L: 0
E: 
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:00/input/input7/event5
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event5
E: MAJOR=13
E: MINOR=69
E: USEC_INITIALIZED=15270866
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/6:LNXVIDEO/video
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
M: input2
R: 2
U: input
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PROP=0
E: EV=3
E: KEY=10 0
E: MODALIAS=input:b0019vp0001e-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=1045242
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1
M: event1
R: 1
U: input
D: c 13:65
N: input/event1
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event1
E: MAJOR=13
E: MINOR=65
E: USEC_INITIALIZED=15231950
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:PNP0C0C/button
E: TAGS=:power-switch:
E: CURRENT_TAGS=:power-switch:

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
M: input3
R: 

Bug#925622:

[Wayne Rowcliffe]

On further investigation, what actually happened is there are apparently
new shortcuts that have been added for "Switch to Application", which use
the same `` key bindings as I had been using, which were then
hopping me around between workspaces in a confusing order because they were
jumping around based on some application ordering that I don't quite
understand.

I am not sure why these aren't showing up in the keybindings section of the
control center app. Maybe I have the wrong version for that...

I was able to disable all of those in dconf-editor and now things are
working as expected again.

-- Wayne Rowcliffe

Bug#925622: gnome-shell: Workspace numbering is wrong when doing "Switch to Workspace" shortcuts

[Wayne Rowcliffe]

Package: gnome-shell
Version: 3.32.0-1
Severity: important

Dear Maintainer,

I just upgraded to gnome-shell 3.32 and noticed the "Switch to Workspace X" 
shortcuts
aren't working as expected. I normally have 5 static workspaces configured, and 
use
shortcuts to move between them.

Previously, the workspaces were in order: 1, 2, 3, 4, 5
Now they seem to be in this order: 1, 4, 3, 2, 5

I assume something simple just got messed up in the 3.32 release since it 
worked fine in 3.30
and in all previous releases.

-- Wayne Rowcliffe

-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (700, 'testing'), (650, 'unstable'), (600, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 4.19.0-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages gnome-shell depends on:
ii  dconf-gsettings-backend [gsettings-backend]  0.30.1-2
ii  evolution-data-server3.30.5-1
ii  gir1.2-accountsservice-1.0   0.6.45-2
ii  gir1.2-atspi-2.0 2.30.0-7
ii  gir1.2-freedesktop   1.58.3-2
ii  gir1.2-gcr-3 3.28.1-1
ii  gir1.2-gdesktopenums-3.0 3.32.0-1
ii  gir1.2-gdm-1.0   3.30.2-3
ii  gir1.2-geoclue-2.0   2.5.2-1
ii  gir1.2-glib-2.0  1.58.3-2
ii  gir1.2-gnomebluetooth-1.03.28.2-3
ii  gir1.2-gnomedesktop-3.0  3.30.2.1-1
ii  gir1.2-gtk-3.0   3.24.5-1
ii  gir1.2-gweather-3.0  3.28.2-2
ii  gir1.2-ibus-1.0  1.5.19-4
ii  gir1.2-mutter-4  3.32.0-1
ii  gir1.2-nm-1.01.14.6-2
ii  gir1.2-nma-1.0   1.8.20-1
ii  gir1.2-pango-1.0 1.42.4-6
ii  gir1.2-polkit-1.00.105-25
ii  gir1.2-rsvg-2.0  2.44.10-1
ii  gir1.2-soup-2.4  2.64.2-2
ii  gir1.2-upowerglib-1.00.99.10-1
ii  gjs  1.54.3-1
ii  gnome-backgrounds3.30.0-1
ii  gnome-settings-daemon3.32.0-1
ii  gnome-shell-common   3.32.0-1
ii  gsettings-desktop-schemas3.32.0-1
ii  libatk-bridge2.0-0   2.30.0-5
ii  libatk1.0-0  2.30.0-2
ii  libc62.28-8
ii  libcairo21.16.0-4
ii  libcroco30.6.12-3
ii  libecal-1.2-19   3.30.5-1
ii  libedataserver-1.2-233.30.5-1
ii  libgcr-base-3-1  3.28.1-1
ii  libgdk-pixbuf2.0-0   2.38.1+dfsg-1
ii  libgirepository-1.0-11.58.3-2
ii  libgjs0g 1.54.3-1
ii  libgles2 1.1.0-1
ii  libglib2.0-0 2.58.3-1
ii  libglib2.0-bin   2.58.3-1
ii  libgstreamer1.0-01.14.4-1
ii  libgtk-3-0   3.24.5-1
ii  libical3 3.0.4-3
ii  libmutter-4-03.32.0-1
ii  libnm0   1.14.6-2
ii  libpango-1.0-0   1.42.4-6
ii  libpangocairo-1.0-0  1.42.4-6
ii  libpolkit-agent-1-0  0.105-25
ii  libpolkit-gobject-1-00.105-25
ii  libpulse-mainloop-glib0  12.2-4
ii  libpulse012.2-4
ii  libsecret-1-00.18.7-1
ii  libsystemd0  241-1
ii  libx11-6 2:1.6.7-1
ii  libxfixes3   1:5.0.3-1
ii  mutter   3.32.0-1
ii  python3  3.7.2-1

Versions of packages gnome-shell recommends:
pn  bolt  
ii  chrome-gnome-shell10.1-5
ii  gdm3  3.30.2-3
ii  gkbd-capplet  3.26.1-1
ii  gnome-control-center  1:3.30.3-1
ii  gnome-user-docs   3.30.2-1
pn  ibus  
pn  iio-sensor-proxy  
pn  switcheroo-control
ii  unzip 6.0-22

Versions of packages gnome-shell suggests:
ii  gir1.2-telepathyglib-0.12   0.24.1-2
ii  gir1.2-telepathylogger-0.2  0.8.2-3

-- no debconf information

Bug#924595: backup2l: Sometimes fails to detect running instance.

[Wayne Conrad]

On Fri, 15 Mar 2019 10:31:36 +0100 Gundolf Kiefer
 wrote:
> Thank you for the great report and the patch!
> 
> I applied the patch upstream:
> 
> https://github.com/gkiefer/backup2l/commit/3941b1a50aa184a4e42fcf80345b248472404108
> 
> -- Gundolf Kiefer
> 
> 

Gundolf,

Thank you for the quick response and for doing the work of maintaining
the package.  It is greatly appreciated!

Wayne Conrad

Bug#924595: backup2l: Sometimes fails to detect running instance.

[wayne]

Package: backup2l
Version: 1.6-3
Severity: normal
Tags: upstream patch

Dear Maintainer,

backup2l can sometimes fail to detect a running instance, such that
two instances are running at the same time.  This occurs when backup2l
is run manually, and then disowned such that backup2l no longer
belongs to the shell I used to start it.  If I then run backup2l again
while the disowned backup2l is still running, the second run will
start running rather that complaining about the lock file and
existing.  Or, if the daily cron job runs, it will start another
instance of backup2l.

To reproduce, do this as root, in bash:

backup2l -b
disown %1

Then while the disowned instance is still running:

backup2l -s

This will run, instead of complaining about the lockfile as expected.
It then removes the lock file.

I believe this occurs because backup2l is using `ps -a` to find the
running backup2l instances, but a disowned backup2l does not show up
in `ps -a`.  Instead, `ps -ax` needs to be used.  The attached patch,
which has this change, seems to fix the problem for me.

Background: I disowned the manual backup2l because I needed the
long-running manual backup to continue even if the SSH session were
interrupted.

-- System Information:
Debian Release: 8.10
  APT prefers oldstable
  APT policy: (990, 'oldstable'), (500, 'oldstable-updates'), (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.16.0-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

backup2l depends on no packages.

Versions of packages backup2l recommends:
ii  bzip2  1.0.6-7+b3

Versions of packages backup2l suggests:
ii  xz-utils  5.1.1alpha+20120614-2+b3

-- Configuration Files:
/etc/backup2l.conf changed:
FOR_VERSION=1.5
VOLNAME="all"
SRCLIST=(/mnt/sdc/mls/nwmls /mnt/sdf/terabitz)
SKIPCOND=(-xdev -path ./documents.new -prune)
BACKUP_DIR="/mnt/hcf/diamond_backups"
MAX_LEVEL=8
MAX_PER_LEVEL=8
MAX_FULL=2
GENERATIONS=1
CREATE_CHECK_FILE=1
PRE_BACKUP ()
{
echo "  pre-backup: nothing to do"
# e. g., shut down some mail/db servers if their files are to be backup'ed
# On a Debian system, the following statements dump a machine-readable list 
of
# all installed packages to a file.
#echo "  writing dpkg selections to /root/dpkg-selections.log..."
#dpkg --get-selections | diff - /root/dpkg-selections.log > /dev/null || 
dpkg --get-selections > /root/dpkg-selections.log
}
POST_BACKUP ()
{
# e. g., restart some mail/db server if its files are to be backup'ed
echo "  post-backup: nothing to do"
}
AUTORUN=0
SIZE_UNITS=""# set to "B", "K", "M" or "G" to obtain unified units in 
summary list
DRIVER_MY_AFIOZ ()
{
case $1 in
-test)
# This function should check whether all prerequisites are met, 
especially if all
# required tools are installed. This prevents backup2l to fail in 
inconvenient
# situations, e. g. during a backup or restore operation. If 
everything is ok, the
# string "ok" should be returned. Everything else is interpreted as 
a failure.
require_tools afio
# The function 'require_tools' checks for the existence of all 
tools passed as
# arguments. If one of the tools is not found by which(1), an 
error message is
# displayed and the function does not return.
echo "ok"
;;
-suffix)
# This function should return the suffix of backup archive files. 
If the driver
#�does not create a file (e. g. transfers the backup data 
immediately to a tape
# or network device), an empty string has to be returned. backup2l 
uses this suffix
# to select a driver for unpacking. If a user-configured driver 
supports the same
# suffix as a built-in driver, the user driver is preferred (as in 
this case).
echo "afioz"
;;
-create)# Arguments: $2 = BID, $3 = archive file name, $4 = 
file list file
# This function is called to create a backup file. The argument $3 
is the full file
# name of the archive file including path and suffix. $4 contains 
an alphabetically
# sorted  list of files (full pathname) to be backed up. 
Directories are not contained,
# they are handled by backup2l directly without using the driver.
# All output to stderr should be directed to stdout ("2>&1").
afio -Zo -G 9 -M 30m -T 2k $3 < $4 2>&1
# This line passes some additional options to afio (see 
afio(1)):
# '-G 9' maximizes the compression by gzip.
# '-M 30m' increases the size of the internal file buffer. 
Larger files have to
# be compressed twice.
# '-T 2k' prevents the compression of files smaller than 2k in 
order to save 

Bug#919652: Acknowledgement (ath10k - QCA6174 - Surface Go - missing board data - fix .bin included extracted form official .msi)

[wayne wayne]

Output of "sudo journalctl | grep ath10k" after getting version 20190114-1 via 
packetmanager into Buster.

Jan 21 16:59:19 debian-surface-go kernel: ath10k_pci :01:00.0: pci irq msi 
oper_irq_mode 2 irq_mode 0 reset_mode 0
Jan 21 16:59:19 debian-surface-go kernel: ath10k_pci :01:00.0: firmware: 
failed to load ath10k/pre-cal-pci-:01:00.0.bin (-2)
Jan 21 16:59:19 debian-surface-go kernel: ath10k_pci :01:00.0: firmware: 
failed to load ath10k/cal-pci-:01:00.0.bin (-2)
Jan 21 16:59:19 debian-surface-go kernel: ath10k_pci :01:00.0: firmware: 
direct-loading firmware ath10k/QCA6174/hw3.0/firmware-6.bin
Jan 21 16:59:19 debian-surface-go kernel: ath10k_pci :01:00.0: qca6174 
hw3.2 target 0x0503 chip_id 0x00340aff sub 168c:3370
Jan 21 16:59:19 debian-surface-go kernel: ath10k_pci :01:00.0: kconfig 
debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
Jan 21 16:59:19 debian-surface-go kernel: ath10k_pci :01:00.0: firmware ver 
RM.4.4.1.c2-00057-QCARMSWP-1 api 6 features 
wowlan,ignore-otp,no-4addr-pad,raw-mode crc32 e061250a
Jan 21 16:59:19 debian-surface-go kernel: ath10k_pci :01:00.0: firmware: 
direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin
Jan 21 16:59:19 debian-surface-go kernel: ath10k_pci :01:00.0: failed to 
fetch board data for 
bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3370 
from ath10k/QCA6174/hw3.0/board-2.bin
Jan 21 16:59:19 debian-surface-go kernel: ath10k_pci :01:00.0: firmware: 
direct-loading firmware ath10k/QCA6174/hw3.0/board.bin
Jan 21 16:59:19 debian-surface-go kernel: ath10k_pci :01:00.0: board_file 
api 1 bmi_id N/A crc32 ed5f849a
Jan 21 16:59:20 debian-surface-go kernel: ath10k_pci :01:00.0: Unknown 
eventid: 118809
Jan 21 16:59:20 debian-surface-go kernel: ath10k_pci :01:00.0: htt-ver 3.56 
wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
Jan 21 16:59:20 debian-surface-go NetworkManager[466]:   
[1548086360.8720] rfkill1: found Wi
...

Version 12.0.0.722 of eeprom_ar6320_3p0_TX8_clpc.bin fixed the issue again.

best regards

Bug#919652: Acknowledgement (ath10k - QCA6174 - Surface Go - missing board data - fix .bin included extracted form official .msi)

[wayne wayne]

Bug not solved, even in latest firmware which entered unstable.

See here

pink@debian-surface-go:~$ apt show firmware-atheros 
Package: firmware-atheros
Version: 20190114-1
...
APT-Sources: http://deb.debian.org/debian unstable/non-free amd64 Packages
...

and here

pink@debian-surface-go:~$ sudo journalctl | grep ath10k
[sudo] Passwort für pink: 
Jan 20 13:30:49 debian-surface-go kernel: ath10k_pci :01:00.0: pci irq msi 
oper_irq_mode 2 irq_mode 0 reset_mode 0
Jan 20 13:30:49 debian-surface-go kernel: ath10k_pci :01:00.0: firmware: 
failed to load ath10k/pre-cal-pci-:01:00.0.bin (-2)
Jan 20 13:30:49 debian-surface-go kernel: ath10k_pci :01:00.0: firmware: 
failed to load ath10k/cal-pci-:01:00.0.bin (-2)
Jan 20 13:30:49 debian-surface-go kernel: ath10k_pci :01:00.0: firmware: 
direct-loading firmware ath10k/QCA6174/hw3.0/firmware-6.bin
Jan 20 13:30:49 debian-surface-go kernel: ath10k_pci :01:00.0: qca6174 
hw3.2 target 0x0503 chip_id 0x00340aff sub 168c:3370
Jan 20 13:30:49 debian-surface-go kernel: ath10k_pci :01:00.0: kconfig 
debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
Jan 20 13:30:49 debian-surface-go kernel: ath10k_pci :01:00.0: firmware ver 
RM.4.4.1.c2-00057-QCARMSWP-1 api 6 features 
wowlan,ignore-otp,no-4addr-pad,raw-mode crc32 e061250a
Jan 20 13:30:49 debian-surface-go kernel: ath10k_pci :01:00.0: firmware: 
direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin
Jan 20 13:30:49 debian-surface-go kernel: ath10k_pci :01:00.0: failed to 
fetch board data for 
bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3370 
from ath10k/QCA6174/hw3.0/board-2.bin
Jan 20 13:30:49 debian-surface-go kernel: ath10k_pci :01:00.0: firmware: 
direct-loading firmware ath10k/QCA6174/hw3.0/board.bin
Jan 20 13:30:49 debian-surface-go kernel: ath10k_pci :01:00.0: board_file 
api 1 bmi_id N/A crc32 ed5f849a
Jan 20 13:30:50 debian-surface-go kernel: ath10k_pci :01:00.0: Unknown 
eventid: 118809
Jan 20 13:30:53 debian-surface-go kernel: ath10k_pci :01:00.0: failed to 
ping firmware: -110
Jan 20 13:30:53 debian-surface-go kernel: ath10k_pci :01:00.0: failed to 
reset rx filter: -110
Jan 20 13:30:53 debian-surface-go kernel: ath10k_pci :01:00.0: could not 
init core (-110)
Jan 20 13:30:53 debian-surface-go kernel: ath10k_pci :01:00.0: could not 
probe fw (-110)

Bug#919656: dmesg output

[wayne wayne]

after connecting the Surface Dock I get the following output:

[ 1548.069549] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1548.095899] usb 2-2: New USB device found, idVendor=045e, idProduct=0900, 
bcdDevice=47.53
[ 1548.095904] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1548.095908] usb 2-2: Product: Surface Dock USB3Hub
[ 1548.095911] usb 2-2: Manufacturer: Microsoft
[ 1548.098453] hub 2-2:1.0: USB hub found
[ 1548.098818] hub 2-2:1.0: 2 ports detected
[ 1548.217553] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[ 1548.376872] usb 1-2: New USB device found, idVendor=045e, idProduct=0901, 
bcdDevice=47.53
[ 1548.376879] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1548.376883] usb 1-2: Product: Surface Dock USB2Hub
[ 1548.376887] usb 1-2: Manufacturer: Microsoft
[ 1548.379165] hub 1-2:1.0: USB hub found
[ 1548.380351] hub 1-2:1.0: 4 ports detected
[ 1548.449617] usb 2-2.2: new SuperSpeed Gen 1 USB device number 3 using 
xhci_hcd
[ 1548.470222] usb 2-2.2: New USB device found, idVendor=045e, idProduct=07c6, 
bcdDevice=30.00
[ 1548.470228] usb 2-2.2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=6
[ 1548.470231] usb 2-2.2: Product: Surface Dock GigE
[ 1548.470234] usb 2-2.2: Manufacturer: Microsoft
[ 1548.470237] usb 2-2.2: SerialNumber: 0100
[ 1548.681433] usb 1-2.1: new high-speed USB device number 5 using xhci_hcd
[ 1548.794992] usb 1-2.1: New USB device found, idVendor=045e, idProduct=0903, 
bcdDevice=47.54
[ 1548.794999] usb 1-2.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[ 1548.795003] usb 1-2.1: Product: Surface Dock USB2Hub
[ 1548.795006] usb 1-2.1: Manufacturer: Microsoft
[ 1548.799435] hub 1-2.1:1.0: USB hub found
[ 1548.800957] hub 1-2.1:1.0: 4 ports detected
[ 1548.865765] usb 2-2.1: new SuperSpeed Gen 1 USB device number 4 using 
xhci_hcd
[ 1548.889499] usb 2-2.1: New USB device found, idVendor=045e, idProduct=0902, 
bcdDevice=47.54
[ 1548.889506] usb 2-2.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[ 1548.889510] usb 2-2.1: Product: Surface Dock USB3Hub
[ 1548.889513] usb 2-2.1: Manufacturer: Microsoft
[ 1548.893042] hub 2-2.1:1.0: USB hub found
[ 1548.893412] hub 2-2.1:1.0: 4 ports detected
[ 1548.920332] usbcore: registered new interface driver r8152
[ 1548.927851] usbcore: registered new interface driver cdc_ether
[ 1548.965452] usb 1-2.3: new full-speed USB device number 6 using xhci_hcd
[ 1549.068526] usb 1-2.3: New USB device found, idVendor=045e, idProduct=0904, 
bcdDevice=70.07
[ 1549.068533] usb 1-2.3: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[ 1549.068537] usb 1-2.3: Product: Surface Dock Extender
[ 1549.068540] usb 1-2.3: Manufacturer: Microsoft
[ 1549.077740] hid-generic 0003:045E:0904.0008: hiddev3,hidraw5: USB HID v1.11 
Device [Microsoft Surface Dock Extender] on usb-:00:14.0-2.3/input0
[ 1549.149663] usb 2-2.2: reset SuperSpeed Gen 1 USB device number 3 using 
xhci_hcd
[ 1549.206651] r8152 2-2.2:1.0 eth0: v1.09.9
[ 1549.226930] r8152 2-2.2:1.0 enxc49dedebff2f: renamed from eth0
[ 1549.264720] IPv6: ADDRCONF(NETDEV_UP): enxc49dedebff2f: link is not ready
[ 1557.800266] IPv6: ADDRCONF(NETDEV_UP): enxc49dedebff2f: link is not ready
[ 1557.818696] r8152 2-2.2:1.0 enxc49dedebff2f: Stop submitting intr, status -71

Bug#919648: i2c - Elantech touchscreen - Surface GO - not recognized properly

[wayne wayne]

Package: linux-image-4.19.0-1-amd64
Severity: important

Device: Surface Go

Debian Version: Buster with latest updates

Summary:

In general it is working fine, but it seems that some stuff is missing because 
device ID is not known and then its loaded in a generic mode and not device 
specific. E.g. the assumed battery should be remove because it is a touchscreen 
and also the power control needs adjustement.

Please let me know which outputs are needed to get the Elantech toucschreen 
recognized properly.

First: The touchscreen is reporting a battery status in GNOME Settings -> 
Energy and also in general in the system.

This can be seen here:

pink@debian:/sys/devices/pci:00/:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN9038:00/0018:04F3:261A.0001/power_supply/hid-0018:04F3:261A.0001-battery$
 ls
capacity  model_name  power   present  status type
deviceonline  powers  scopesubsystem  uevent
pink@debian:/sys/devices/pci:00/:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN9038:00/0018:04F3:261A.0001/power_supply/hid-0018:04F3:261A.0001-battery$
 cat uevent 
POWER_SUPPLY_NAME=hid-0018:04F3:261A.0001-battery
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_CAPACITY=0
POWER_SUPPLY_MODEL_NAME=ELAN9038:00 04F3:261A
POWER_SUPPLY_STATUS=Unknown
POWER_SUPPLY_SCOPE=Device
and

pink@debian:~$ cat 
/sys/class/power_supply/hid-0018\:04F3\:261A.0001-battery/uevent
POWER_SUPPLY_NAME=hid-0018:04F3:261A.0001-battery
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_CAPACITY=0
POWER_SUPPLY_MODEL_NAME=ELAN9038:00 04F3:261A
POWER_SUPPLY_STATUS=Unknown
POWER_SUPPLY_SCOPE=Device

In general, the device seems not to be recognized properly, see

pink@debian:~$ sudo journalctl | grep i2c
[sudo] Passwort für pink: 
Jan 17 19:35:44 debian kernel: i2c_hid i2c-ELAN9038:00: i2c-ELAN9038:00 supply 
vdd not found, using dummy regulator
Jan 17 19:35:44 debian kernel: i2c_hid i2c-ELAN9038:00: Linked as a consumer to 
regulator.0
Jan 17 19:35:44 debian kernel: i2c_hid i2c-ELAN9038:00: i2c-ELAN9038:00 supply 
vddl not found, using dummy regulator
Jan 17 19:35:44 debian kernel: input: ELAN9038:00 04F3:261A Touchscreen as 
/devices/pci:00/:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN9038:00/0018:04F3:261A.0001/input/input1
Jan 17 19:35:44 debian kernel: input: ELAN9038:00 04F3:261A as 
/devices/pci:00/:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN9038:00/0018:04F3:261A.0001/input/input2
Jan 17 19:35:44 debian kernel: input: ELAN9038:00 04F3:261A as 
/devices/pci:00/:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN9038:00/0018:04F3:261A.0001/input/input3
Jan 17 19:35:44 debian kernel: input: ELAN9038:00 04F3:261A as 
/devices/pci:00/:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN9038:00/0018:04F3:261A.0001/input/input4
Jan 17 19:35:44 debian kernel: input: ELAN9038:00 04F3:261A as 
/devices/pci:00/:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN9038:00/0018:04F3:261A.0001/input/input6
Jan 17 19:35:44 debian kernel: input: ELAN9038:00 04F3:261A as 
/devices/pci:00/:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN9038:00/0018:04F3:261A.0001/input/input7
Jan 17 19:35:44 debian kernel: input: ELAN9038:00 04F3:261A as 
/devices/pci:00/:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN9038:00/0018:04F3:261A.0001/input/input8
Jan 17 19:35:44 debian kernel: hid-generic 0018:04F3:261A.0001: input,hidraw0: 
I2C HID v1.00 Device [ELAN9038:00 04F3:261A] on i2c-ELAN9038:00
Jan 17 19:35:45 debian kernel: input: ELAN9038:00 04F3:261A as 
/devices/pci:00/:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN9038:00/0018:04F3:261A.0001/input/input20
Jan 17 19:35:45 debian kernel: input: ELAN9038:00 04F3:261A Pen as 
/devices/pci:00/:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN9038:00/0018:04F3:261A.0001/input/input23
Jan 17 19:35:45 debian kernel: hid-multitouch 0018:04F3:261A.0001: 
input,hidraw0: I2C HID v1.00 Device [ELAN9038:00 04F3:261A] on i2c-ELAN9038:00

and output of

pink@debian:~$ cat /proc/bus/input/devices 
I: Bus=0011 Vendor=0001 Product=0001 Version=ab83
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd leds event0 
B: PROP=0
B: EV=120013
B: KEY=40200 3803078f800d001 fedfffef fffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=045e Product=096f Version=0111
N: Name="Microsoft Surface Type Cover"
P: Phys=usb-:00:14.0-7/input0
S: 
Sysfs=/devices/pci:00/:00:14.0/usb1/1-7/1-7:1.0/0003:045E:096F.0004/input/input10
U: Uniq=
H: Handlers=sysrq kbd leds event1 
B: PROP=0
B: EV=120013
B: KEY=10007 ff9f207ac14057ff febeffdfffef fffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=045e Product=096f Version=0111
N: Name="Microsoft Surface Type Cover Consumer Control"
P: Phys=usb-:00:14.0-7/input1
S: 
Sysfs=/devices/pci:00/:00:14.0/usb1/1-7/1-7:1.1/0003:045E:096F.0005/input/input11
U: Uniq=
H: Handlers=kbd event2 
B: PROP=0
B: EV=1f
B: KEY=3f0003007f 0 0 

Bug#794410: Installer hangs during 'select and install software'

[Wayne Gray]

Updated bios before starting installation. Still had persistent
hanging following 'installed discover.' Installed Jessie

On Mon, Aug 27, 2018 at 4:30 PM Jean-Louis Deniest
 wrote:
>
> Hi,
>
> This problem has been solved by updating the bios. Then installation of
> 9.5.0 went without problems.
>
>
>
> On 23/07/18 21:15, Jean-Louis Deniest wrote:
> > Thanks Cyril.
> >
> > Here is it.
> > usb key : debian 9, DVD version
> >
> > I made screenshots of vt4 during :
> > - error when searching mirrors - no mirrors were accepted, even usa -
> > debian. I selected then 'continue with no mirror' (see screenshot 1 &
> > 2). It has happened a few times. > screenshots 1 and 2
> > - just before the hanging, at the phase of installing discover.
> >
> > Then, I runned another time the install, and made a few screenshots of
> > /var/log/syslog, until it hangs.
> >
> > All screenshots here : https://cloud.owncube.com/s/FyPgZMi9bzQEPoj
> >
> > Hope it helps...
> >
> >
> > On 22/07/18 20:02, Cyril Brulebois wrote:
> >> Hi Jean-Louis,
> >>
> >> Jean-Louis Deniest  (2018-07-21):
> >>> Hello, I have the same issue.
> >>>
> >>> Installing debian 9 stretch, both cd
> >>> (debian-9.5.0-amd64-xfce-CD-1.iso) and
> >>> the dvd versions.
> >>>
> >>> Hangs at 12% : at the phase of installing "discover (amd64)"
> >>>
> >>> I tried about 10 times.
> >>>
> >>> Laptop is Packard Bell ENLG71BM-C05U
> >>>
> >>> I used the additional drivers (from
> >>> http://cdimage.debian.org/cdimage/unofficial/non-free/firmware/stretch/20180714/),
> >>> and I put these .deb packages on another usb key : the effect is that I
> >>> don't have the step where they search for firmware for
> >>> rtlwifi/rtl8723befw.bin and rtl_nic/rtl8168g-2.fw
> >>>
> >>> I don't have options to disable APCI in the bios.
> >>>
> >>> I managed to install Opensuse on this computer, and there was
> >>> Windows 10
> >>> working properly.
> >>>
> >>> Any suggestion is welcome...
> >> Can you please switch to vt4 and tell us what the last lines look like?
> >> Bonus points if you can extract the whole /var/log/syslog file (e.g. by
> >> using netcat to another machine); a photograph would probably work too.
> >>
> >> Thanks already.
> >>
> >>
> >> Cheers,
> >
> >
>
> --
> To unsubscribe, send mail to 794410-unsubscr...@bugs.debian.org.

Bug#882249: Welcome to Amazon - congrats wayne Cy

[wayne welborn]

what is it?
w3

On Mon, Nov 20, 2017 at 11:14 AM, thank you  wrote:

> A Special Thankyou!
>
> claim your amazonShopperReward
>
> Thankyou for participating in our amazonquestionnaire. your feedback
>
> about Amazon will earn you a special reward.
>
> Thankyou for your opinion.
>
>
>
> 
> Toberemoved fromreceivingfuturemail justgo here.
> 
> PO box 971, Reno NV 89504
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Package: xrdp Version: 0.9.4-1 Severity: wishlist Hi, the attached script
> works for me to compile the xrdp pulse modules any time needed. Please test
> and consider to ship it. In case shipping it is considered useful, please
> update d/README.Debian accordingly. Wolfgang

Bug#881647: wayne, your recent order 623589 Ny

[Wayne Turner]

Stop sending me this shit!

On Nov 13, 2017 4:31 PM, "Amazon FinalNotice" 
wrote:

> * welcome to amazon*
>
>
> 
>
>
> 
>
>
> 
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Package: debian-faq Severity: wishlist Tags: patch,l10n X-Debbugs-CC:
> frans.spiesscha...@yucom.be Hi, I got a fully translated po-based Dutch
> translation for the Debian FAQ from Frans Spiesschaert (in X-Debbugs-CC),
> and added the additional files, which are needed to build the translation,
> to add the 'debian-faq-nl' extra package etc. I did check for formatting
> errors, and it builds fine (html and pdf). A complete patch is attached. So
> long Holger -- 
> Created with Sylpheed 3.5.1 under D E B I A N L I N U X 9 " S T R E T C H "
> . Registered Linux User #311290 - https://linuxcounter.net/
> 

Bug#683264: Debian Bug report logs - #683264,Icedove creates very large number of child threads

[Wayne Mery]

Duncan,

Do you still see this problem when using a current version of icedove?

Bug#846176: Roof

[Wayne Pooler]

I sold my home  in  July

Bug#834871: cryptsetup: initscript "stop" borks encrypted swap partition for subsequent "start"s

[Wayne Warren]

Package: cryptsetup
Version: 2:1.7.0-2
Severity: normal

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?

I installed debian jessie, during which time the installer warned me that it
would be inadvisable not to use encrypted swap. Who am I to disagree? I later
upgraded to debian stretch/testing but as far as I can tell looking at the diff
between 1.6.6-5 and master at git://anonscm.debian.org/pkg-cryptsetup/cryptsetup
the bug is almost certain in jessie also. Does anyone else even use encrypted
swap? 

   * What exactly did you do (or not do) that was effective (or
 ineffective)?

I edited /lib/cryptsetup/cryptdisks.functions to have the "stop" command check
for the "swap" option in the /etc/crypttab line and ran a new function named
"do_unswap()" to call "swapoff -a; do_close; return 0" to ensure that the
encrypted disk would be properly shut down on restart.

   * What was the outcome of this action?

Encrypted swap on this machine is great again.

   * What outcome did you expect instead?

This is what I expected since I verified manually before modifying the
cryptdisks.functions file that if I properly turn off swap and close the
encrypted partition before rebooting the swap partition would indeed be active
by the time i log in next.

I'll probably try submitting a patch or something.

*** End of the template - remove these template lines ***


-- Package-specific info:
-- /proc/cmdline
BOOT_IMAGE=/vmlinuz-4.6.0-1-amd64 
root=UUID=d470e0cc-ba84-4b67-bf35-552dd54ce2fd ro initrd=/install/initrd.gz 
quiet

-- /etc/crypttab
sdb5_crypt /dev/sdb5 none luks,swap
sdb6_crypt UUID=9815be3f-0dd8-4184-a121-b7ead1c3ee86 none luks

-- /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
#
/dev/mapper/sdb6_crypt /   ext4errors=remount-ro 0   1
# /boot was on /dev/sdb1 during installation
UUID=0574ec56-0269-49ff-a2e9-a00ecf326353 /boot   ext2ro
  0   2
/dev/mapper/sdb5_crypt noneswapsw  0   0
/dev/sr0/media/cdrom0   udf,iso9660 user,noauto 0   0
tmpfs   /runtmpfs   nodev,nosuid,size=10%,mode=1755 0   0
tmpfs   /run/lock   tmpfs   nodev,nosuid,size=10%,mode=1777 0   0
tmpfs   /run/shmtmpfs   nodev,nosuid,size=20%,mode=1777 0   0
tmpfs   /tmptmpfs   nodev,nosuid,size=50%,mode=1777 0   0

-- lsmod
Module  Size  Used by
snd_hda_codec_hdmi 45056  1
iTCO_wdt   16384  0
iTCO_vendor_support16384  1 iTCO_wdt
intel_rapl 20480  0
x86_pkg_temp_thermal16384  0
snd_hda_codec_realtek86016  1
intel_powerclamp   16384  0
coretemp   16384  0
kvm_intel 188416  0
snd_hda_codec_generic69632  1 snd_hda_codec_realtek
kvm   561152  1 kvm_intel
irqbypass  16384  1 kvm
pcspkr 16384  0
serio_raw  16384  0
snd_hda_intel  36864  0
snd_hda_codec 135168  4 
snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_core   81920  5 
snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hwdep  16384  1 snd_hda_codec
joydev 20480  0
snd_pcm   106496  4 
snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
sb_edac32768  0
snd_timer  32768  1 snd_pcm
edac_core  57344  1 sb_edac
lpc_ich24576  0
snd81920  8 
snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
sg 32768  0
mei_me 32768  0
i2c_i801   20480  0
mfd_core   16384  1 lpc_ich
ipmi_si57344  0
soundcore  16384  1 snd
mei94208  1 mei_me
ioatdma53248  0
dca16384  1 ioatdma
shpchp 36864  0
8250_fintek16384  0
ipmi_msghandler49152  1 ipmi_si
tpm_infineon   20480  0
tpm_tis20480  0
tpm45056  2 tpm_tis,tpm_infineon
processor  36864  0
evdev  24576  19
parport_pc 28672  0
sunrpc331776  1
ppdev  20480  0
lp 20480  0
parport49152  3 lp,ppdev,parport_pc
autofs440960  2
ext4  593920  4
ecb16384  0
crc16  16384  1 ext4
jbd2  106496  1 ext4
crc32c_generic 16384  0
mbcache16384  5 ext4
algif_skcipher 20480  0
af_alg   

Bug#823061: liney612-✉-Message-on-hold-

[Wayne Liney]

Send me a pic

On Sat, 30 Apr 2016 5:31 pm Angel,  wrote:

>
>
>
>
>
>
>
>
>
>
>
> * _Just_saw_something_really_hot_that_made_me_wonder...
> _What_would_you_like_me_to_wear_tonight?_
> _What's_the_hottest_thing_I_can_do_for_you_when_I_see_you?_
> We'll_even_play_some_games_honey_
> _you_just_guess_what_color_my_panties_are,_then_I'll_give_you_whatever_you_want_;)
> register_and_add_my_nickname_:angelicax3 u_ns__ub optout
>  *
> 

Bug#808102: Delivery Status Notification (Failure)

[Wayne Rowcliffe]

On Thu, Dec 17, 2015 at 9:22 AM, David Kalnischkies <da...@kalnischkies.de>
wrote:

> Control: tag -1 - moreinfo unreproducible
>
> On Wed, Dec 16, 2015 at 09:25:26PM -0600, Wayne Rowcliffe wrote:
> > I think I may have successfully sent the status file to
> > da...@kalnischkies.de
>
> Yeah, that worked. Next time you might want to compress the file through
> as 4MB is pretty big and probably the reason why mailservers denied it
> (after all, mails of this size are probably spam…).
>
> Ah. Good point. I will try to remember that next time :)



>
> Anyway, the problem is our deb822 parser which is confused by one of
> your own packages which happens to be right above libgnome-bluetooth13:
>
>
Interesting. I think I made that package back in 2010. I didn't realize any
of that stuff was still installed...

>
> So, to fix that on your end either set a proper value for this field in
> your package – or don't set it et all. On our end, I will have to dig
> into the parser: I remember changing whitespace parsing "recently", so
> that could be a 1.1 regression and I wanted to look into it for other
> reasons as well…
>
> That did indeed fix it. Thank you.

-- Wayne Rowcliffe

Bug#808102: Delivery Status Notification (Failure)

[Wayne Rowcliffe]

I think I may have successfully sent the status file to
da...@kalnischkies.de

On Wed, Dec 16, 2015 at 9:23 PM, Wayne Rowcliffe <war1...@gmail.com> wrote:

> This is regarding bug 808102 I am not having much luck getting my status
> file accepted by the debian mail server. Perhaps your domain will be more
> accommodating.
>
>
> -- Forwarded message --
> From: Wayne Rowcliffe <war1...@gmail.com>
> Date: Wed, Dec 16, 2015 at 9:18 PM
> Subject: Re: Delivery Status Notification (Failure)
> To: 808...@bugs.debian.org
>
>
> I am attempting to attach the file with a `txt` extension. Maybe it will
> get through the mail filters that way...
>
> -- Wayne
>
> On Wed, Dec 16, 2015 at 9:15 PM, Wayne Rowcliffe <war1...@gmail.com>
> wrote:
>
>> I tried attaching my status file but I got an email saying that the
>> attachment was rejected. I will look into that.
>>
>> For the record, no I do not manually edit the file normally.
>> I am a software developer by trade so I was trying to debug the issue on
>> my own. It seems to be happening only on this laptop and none of the other
>> machines that I have the same sources.list on.
>>
>> -- Wayne
>>
>
>
>

Bug#808102: Fwd: Delivery Status Notification (Failure)

[Wayne Rowcliffe]

I tried attaching my status file but I got an email saying that the
attachment was rejected. I will look into that.

For the record, no I do not manually edit the file normally.
I am a software developer by trade so I was trying to debug the issue on my
own. It seems to be happening only on this laptop and none of the other
machines that I have the same sources.list on.

-- Wayne

Bug#808102: apt: `apt-cache policy` does not find package listed in `/var/lib/dpkg/status`

[Wayne Rowcliffe]

Package: apt
Version: 1.1.5
Severity: important

Dear Maintainer,

I was installing upgrades the other day and everything appeared to work
correctly. Then I went to manually install a package and `apt` said that
there were missing dependencies and I needed to run `apt-get install -f`
to fix them. I did this, but the problem persisted.

Digging into it more, I found that `evince` depends on
`libevdocument3-4`. Both of these are installed according to `dpkg -l`
and both are present in `/var/lib/dpkg/status`

However, `apt-cache policy libevdocument3-4` said the file was not
installed.

After trying multiple things, I found that if I moved `libevdocument3-4`
up next to `evince` in `/var/lib/dpkg/status`, then everything worked
correctly.

I just ran `apt-get upgrade` and now it is telling me:

apt-get install
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies:
 gir1.2-gnomebluetooth-1.0 : Depends: libgnome-bluetooth13 (>= 3.12.0)
 but it is not installed
  gnome-bluetooth : Depends: libgnome-bluetooth13 (>= 3.12.0) but it is
  not installed
  gnome-control-center : Depends: libgnome-bluetooth13 (>= 3.12.0) but
  it is not installed
 E: Unmet dependencies. Try using -f.

So this seems to be a broader issue where if I fix one thing then
another breaks. `libgnome-bluetooth13` is installed and present in
`/var/lib/dpkg/status`.

-- Wayne Rowcliffe


-- Package-specific info:

-- apt-config dump --

APT "";
APT::Architecture "amd64";
APT::Build-Essential "";
APT::Build-Essential:: "build-essential";
APT::Install-Recommends "1";
APT::Install-Suggests "0";
APT::Sandbox "";
APT::Sandbox::User "_apt";
APT::Authentication "";
APT::Authentication::TrustCDROM "true";
APT::NeverAutoRemove "";
APT::NeverAutoRemove:: "^firmware-linux.*";
APT::NeverAutoRemove:: "^linux-firmware$";
APT::NeverAutoRemove:: "^linux-image-4\.1\.0-2-amd64$";
APT::NeverAutoRemove:: "^linux-image-4\.2\.0-1-amd64$";
APT::NeverAutoRemove:: "^linux-headers-4\.1\.0-2-amd64$";
APT::NeverAutoRemove:: "^linux-headers-4\.2\.0-1-amd64$";
APT::NeverAutoRemove:: "^linux-image-extra-4\.1\.0-2-amd64$";
APT::NeverAutoRemove:: "^linux-image-extra-4\.2\.0-1-amd64$";
APT::NeverAutoRemove:: "^linux-signed-image-4\.1\.0-2-amd64$";
APT::NeverAutoRemove:: "^linux-signed-image-4\.2\.0-1-amd64$";
APT::NeverAutoRemove:: "^kfreebsd-image-4\.1\.0-2-amd64$";
APT::NeverAutoRemove:: "^kfreebsd-image-4\.2\.0-1-amd64$";
APT::NeverAutoRemove:: "^kfreebsd-headers-4\.1\.0-2-amd64$";
APT::NeverAutoRemove:: "^kfreebsd-headers-4\.2\.0-1-amd64$";
APT::NeverAutoRemove:: "^gnumach-image-4\.1\.0-2-amd64$";
APT::NeverAutoRemove:: "^gnumach-image-4\.2\.0-1-amd64$";
APT::NeverAutoRemove:: "^.*-modules-4\.1\.0-2-amd64$";
APT::NeverAutoRemove:: "^.*-modules-4\.2\.0-1-amd64$";
APT::NeverAutoRemove:: "^.*-kernel-4\.1\.0-2-amd64$";
APT::NeverAutoRemove:: "^.*-kernel-4\.2\.0-1-amd64$";
APT::NeverAutoRemove:: "^linux-backports-modules-.*-4\.1\.0-2-amd64$";
APT::NeverAutoRemove:: "^linux-backports-modules-.*-4\.2\.0-1-amd64$";
APT::NeverAutoRemove:: "^linux-tools-4\.1\.0-2-amd64$";
APT::NeverAutoRemove:: "^linux-tools-4\.2\.0-1-amd64$";
APT::NeverAutoRemove:: "^postgresql-";
APT::VersionedKernelPackages "";
APT::VersionedKernelPackages:: "linux-image";
APT::VersionedKernelPackages:: "linux-headers";
APT::VersionedKernelPackages:: "linux-image-extra";
APT::VersionedKernelPackages:: "linux-signed-image";
APT::VersionedKernelPackages:: "kfreebsd-image";
APT::VersionedKernelPackages:: "kfreebsd-headers";
APT::VersionedKernelPackages:: "gnumach-image";
APT::VersionedKernelPackages:: ".*-modules";
APT::VersionedKernelPackages:: ".*-kernel";
APT::VersionedKernelPackages:: "linux-backports-modules-.*";
APT::VersionedKernelPackages:: "linux-tools";
APT::Never-MarkAuto-Sections "";
APT::Never-MarkAuto-Sections:: "metapackages";
APT::Never-MarkAuto-Sections:: "contrib/metapackages";
APT::Never-MarkAuto-Sections:: "non-free/metapackages";
APT::Never-MarkAuto-Sections:: "restricted/metapackages";
APT::Never-MarkAuto-Sections:: "universe/metapackages";
APT::Never-MarkAuto-Sections:: "multiverse/metapackages";
APT::Move-Autobit-Sections "";
APT::Move-Autobit-Sections:: "oldlibs";
APT::Move-Autobit-Sections:: "contrib/oldlibs";
APT::Move-Autobit-Sections:: "non-free/oldlibs";
APT:

Bug#807980: This bug can be closed

[Wayne Rowcliffe]

I was able to get things working correctly by moving libevdocument3-4 up in
the `/var/lib/dpkg/status` file so that it was next to `evince`. I have no
idea why that changed anything, but afterward it found the package fine.

-- Wayne

Bug#807980: libevdocument3-4: Fails to install without specifying an error

[Wayne Rowcliffe]

Package: libevdocument3-4
Version: 3.18.2-1
Severity: grave
Justification: renders package unusable

Dear Maintainer,

I had an upgrade that failed to complete. It said evince was partially
installed. So I ran `apt-get install -f` and the problem persisted.

I ran `apt-get remove libevdocument3-4 evince libevview3-3` and was then
able to complete the upgrade and afterwards install several other
packages.

I then tried to reinstall evince.

apt-get install evince
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  libevdocument3-4 libevview3-3

The following NEW packages will be installed:
  evince libevdocument3-4 libevview3-3
0 upgraded, 3 newly installed, 0 to remove and 0 not
upgraded.
Need to get 0 B/2,304 kB of archives.
After this operation, 3,591 kB of additional disk space will
be used.
Do you want to continue? [Y/n] y
(Reading database ... 311103 files and directories currently
installed.)
Preparing to unpack .../libevdocument3-4_3.18.2-1_amd64.deb

Unpacking libevdocument3-4 (3.18.2-1) over (3.18.2-1) ...
Selecting previously unselected package libevview3-3.
Preparing to unpack .../libevview3-3_3.18.2-1_amd64.deb ...
Unpacking libevview3-3 (3.18.2-1) ...
Selecting previously unselected package evince.
Preparing to unpack .../evince_3.18.2-1_amd64.deb ...
Unpacking evince (3.18.2-1) ...
Processing triggers for libc-bin (2.19-22) ...
Setting up libevdocument3-4 (3.18.2-1) ...
Setting up libevview3-3 (3.18.2-1) ...
Setting up evince (3.18.2-1) ...
Processing triggers for libc-bin (2.19-22) ...

That seemed to be successful.

However:

apt-get install
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies:
 evince : Depends: libevdocument3-4 (= 3.18.2-1) but it is not installed
 libevview3-3 : Depends: libevdocument3-4 (>= 3.18.0) but it is not
 installed
E: Unmet dependencies. Try using -f.

and

apt-cache policy libevdocument3-4
libevdocument3-4:
  Installed: (none)
  Candidate: 3.18.2-1
  Version table:
 3.18.2-1 700
   700 http://ftp.us.debian.org/debian testing/main amd64 Packages
   650 http://ftp.us.debian.org/debian unstable/main amd64 Packages

I am not sure what the issue is but I filed it under evince since that
is the package causing me issues.

-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (700, 'testing'), (650, 'unstable'), (600, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.2.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages libevdocument3-4 depends on:
ii  libarchive13 3.1.2-11+b1
ii  libatk1.0-0  2.18.0-1
ii  libc62.19-22
ii  libcairo-gobject21.14.4-1
ii  libcairo21.14.4-1
ii  libdjvulibre21   3.5.27.1-5
ii  libgcc1  1:5.2.1-23
ii  libgdk-pixbuf2.0-0   2.32.2-1
ii  libglib2.0-0 2.46.2-1
ii  libgtk-3-0   3.18.5-1
ii  libgxps2 0.2.3.2-1
ii  libkpathsea6 2015.20150524.37493-7
ii  libpango-1.0-0   1.38.1-1
ii  libpangocairo-1.0-0  1.38.1-1
ii  libpoppler-glib8 0.26.5-4
ii  libspectre1  0.2.7-3
ii  libstdc++6   5.2.1-23
ii  libtiff5 4.0.5-1
ii  libxml2  2.9.2+zdfsg1-4
ii  zlib1g   1:1.2.8.dfsg-2+b1

libevdocument3-4 recommends no packages.

libevdocument3-4 suggests no packages.

-- no debconf information

Bug#800721:

[wayne wayne]

on initial driver setup I get:

[1.564855] iwlwifi :03:00.0: firmware: direct-loading firmware
iwlwifi-7260-9.ucode
[1.565049] iwlwifi :03:00.0: loaded firmware version 23.214.9.0 op_mode
iwlmvm
...
[1.577597] iwlwifi :03:00.0: Detected Intel(R) Dual Band Wireless AC
7260, REV=0x144
[1.578136] iwlwifi :03:00.0: L1 Enabled - LTR Enabled
[1.579186] iwlwifi :03:00.0: L1 Enabled - LTR Enabled

Sine I have updated to latest
https://packages.debian.org/jessie-backports/firmware-iwlwifi package from
backports the error hasn't occured anymore. 

You could also try to update to this package from backports. You can also check
if this package has the latest drivers included for your wifi card. Here
https://wireless.wiki.kernel.org/en/users/Drivers/iwlwifi is a list which .ucode
is needed for which wifi card on each kernel.

Are you running 4.1 kernel from jessie backports
https://packages.debian.org/de/jessie-backports/linux-image-amd64? Because what
is written in the list on kernel.org, if v13 is expected, it is for kernel
version 4.1+. In jessie-backports latest wifi driver for you card is v10, as
seen in your log, which is loaded as the most recent one. This could be the
reason why you are getting this error. 

So you could try to download
https://wireless.wiki.kernel.org/_media/en/users/drivers/iwlwifi-7265-ucode-25.30.13.0.tgz
and copy the two .ucode files to "/lib/firmware" were also the other
iwlwifi--*.ucode files are located and then try reboot and check dmesg if
error still exists (because this will bring you latest intel driver for your
kernel). Or you go back to Jessie's normal kernel 3.16 and use the wifi driver
package from jessie-backports. So two options, going back to old kernel and
package from backports or manually "install" driver for your actual kernel.

This is just what I could figure out, I am not an expert, so no warranty! :)

Please let us know if this helped you.

> Joni Orponen  hat am 9. Oktober 2015 um 19:03
> geschrieben:
> 
> 
> I'm having quite similar symptoms on an Intel NUCi3RYH.
> 
> Are you also getting
> 
> iwlwifi :02:00.0: Microcode SW error detected.  Restarting 0x200.
> 
> in your dmesg output when this happens?
> 
> And are you also getting something like
> 
> [2.329024] iwlwifi :02:00.0: Unsupported splx structure
> [2.329152] iwlwifi :02:00.0: firmware: failed to load
> iwlwifi-7265D-13.ucode (-2)
> [2.329158] iwlwifi :02:00.0: Direct firmware load for
> iwlwifi-7265D-13.ucode failed with error -2
> [2.329175] iwlwifi :02:00.0: firmware: failed to load
> iwlwifi-7265D-12.ucode (-2)
> [2.329179] iwlwifi :02:00.0: Direct firmware load for
> iwlwifi-7265D-12.ucode failed with error -2
> [2.329192] iwlwifi :02:00.0: firmware: failed to load
> iwlwifi-7265D-11.ucode (-2)
> [2.329196] iwlwifi :02:00.0: Direct firmware load for
> iwlwifi-7265D-11.ucode failed with error -2
> [2.335448] iwlwifi :02:00.0: firmware: direct-loading firmware
> iwlwifi-7265D-10.ucode
> [2.335461] iwlwifi :02:00.0: Firmware has old API version, expected
> v12 through v13, got v10.
> [2.335467] iwlwifi :02:00.0: New firmware can be obtained from
> http://www.intellinuxwireless.org/.
> 
> on the initial driver startup?
> 
> -- Joni Orponen

Bug#800721:

[wayne wayne]

Wifi was working stable for a few days now, even when using standby and let
running Laptop 8h in Idle.

But today, after 1.5h beeing Idle and screen of, when coming back, Wifi was not
working. Waiting 3 mins as before does not help and I needed to disable and
enable Wifi adapter in GNOME-Networkmanager to enable Internet and local
network-access again.

Here is one output from iwconfig in terminal while wifi was not working:

"
eth0  no wireless extensions.

wlan0 IEEE 802.11abgn  ESSID:"TEST"  
  Mode:Managed  Frequency:2.412 GHz  Access Point: 34:31:C4:66:1F:56   
  Bit Rate=1 Mb/s   Tx-Power=22 dBm   
  Retry short limit:7   RTS thr:off   Fragment thr:off
  Encryption key:off
  Power Management:on
  Link Quality=50/70  Signal level=-60 dBm  
  Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
  Tx excessive retries:1  Invalid misc:548   Missed beacon:0

wwan0 no wireless extensions.

lono wireless extensions.
"

Then I did another output in terminal after disable and enable WIFI adapter:

"
eth0  no wireless extensions.

wlan0 IEEE 802.11abgn  ESSID:"TEST"  
  Mode:Managed  Frequency:2.412 GHz  Access Point: 34:31:C4:66:1F:56   
  Bit Rate=78 Mb/s   Tx-Power=22 dBm   
  Retry short limit:7   RTS thr:off   Fragment thr:off
  Encryption key:off
  Power Management:on
  Link Quality=46/70  Signal level=-64 dBm  
  Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
  Tx excessive retries:0  Invalid misc:25   Missed beacon:0

wwan0 no wireless extensions.

lono wireless extensions.
"

In both cases Network is connected but in first case it was not working.

Maybe the output of lspci -vvnn also helps:

"
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller
[8086:0a04] (rev 0b)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 

00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT
Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA
controller])
Subsystem: Lenovo Device [17aa:220c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-  [disabled]
Capabilities: 
Kernel driver in use: i915

00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller
[8086:0a0c] (rev 0b)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
Kernel driver in use: snd_hda_intel

00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC
[8086:9c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
SERR- 
Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0
[8086:9c3a] (rev 04)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
Kernel driver in use: mei_me

00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection
I218-LM [8086:155a] (rev 04)
Subsystem: Lenovo ThinkPad X240 [17aa:2214]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
Kernel driver in use: e1000e

00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller
[8086:9c20] (rev 04)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 6
[8086:9c1a] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel 

Bug#800694:

[wayne wayne]

https://bugzilla.redhat.com/show_bug.cgi?id=1255577

Bug#800721:

[wayne wayne]

Maybe I should add that if I was running Ubuntu 14.04 LTS that everything was
running smooth without any issues. So its not a hardware or router issue.

Bug#762275: Post-install script fails because systemd-journal group exists

[Wayne Rowcliffe]

The upgrade to 215-5+b1 because I had manually created the systemd-journal
group. This caused the post-install script to fail when it tried to create
that group.
The script executed successfully when I commented out that line.

-- Wayne Rowcliffe

Bug#746200: apt: Apt-get install doesn't respect /target_release

[Wayne Rowcliffe]

Package: apt
Version: 1.0.2
Severity: normal

Dear Maintainer,

With the recent upgrade of apt to 1.0, /target_release flags do not seem
to have any effect.

For my particuluar situation, I am trying to upgrade gnome to use 3.12.
This involves pulling packages from both experimental and unstable. So I
attempt to do: `apt-get install gnome-shell/experimental
empathy/unstable`, etc. However, when I do this apt seems to completely
ignore the flags and instead tries to install the versions from testing.

I have used this method many times in the past to specify a set of
packages from different releases that won't conflict with each other.
Since the upgrade to apt 1.0, I am not able to.

-- Wayne Rowcliffe


-- Package-specific info:

-- apt-config dump --

APT ;
APT::Architecture amd64;
APT::Build-Essential ;
APT::Build-Essential:: build-essential;
APT::Install-Recommends 1;
APT::Install-Suggests 0;
APT::Authentication ;
APT::Authentication::TrustCDROM true;
APT::NeverAutoRemove ;
APT::NeverAutoRemove:: ^firmware-linux.*;
APT::NeverAutoRemove:: ^linux-firmware$;
APT::NeverAutoRemove:: ^linux-image-3\.10-3-amd64$;
APT::NeverAutoRemove:: ^linux-image-3\.13-1-amd64$;
APT::NeverAutoRemove:: ^linux-headers-3\.10-3-amd64$;
APT::NeverAutoRemove:: ^linux-headers-3\.13-1-amd64$;
APT::NeverAutoRemove:: ^linux-image-extra-3\.10-3-amd64$;
APT::NeverAutoRemove:: ^linux-image-extra-3\.13-1-amd64$;
APT::NeverAutoRemove:: ^linux-signed-image-3\.10-3-amd64$;
APT::NeverAutoRemove:: ^linux-signed-image-3\.13-1-amd64$;
APT::NeverAutoRemove:: ^kfreebsd-image-3\.10-3-amd64$;
APT::NeverAutoRemove:: ^kfreebsd-image-3\.13-1-amd64$;
APT::NeverAutoRemove:: ^kfreebsd-headers-3\.10-3-amd64$;
APT::NeverAutoRemove:: ^kfreebsd-headers-3\.13-1-amd64$;
APT::NeverAutoRemove:: ^gnumach-image-3\.10-3-amd64$;
APT::NeverAutoRemove:: ^gnumach-image-3\.13-1-amd64$;
APT::NeverAutoRemove:: ^.*-modules-3\.10-3-amd64$;
APT::NeverAutoRemove:: ^.*-modules-3\.13-1-amd64$;
APT::NeverAutoRemove:: ^.*-kernel-3\.10-3-amd64$;
APT::NeverAutoRemove:: ^.*-kernel-3\.13-1-amd64$;
APT::NeverAutoRemove:: ^linux-backports-modules-.*-3\.10-3-amd64$;
APT::NeverAutoRemove:: ^linux-backports-modules-.*-3\.13-1-amd64$;
APT::NeverAutoRemove:: ^postgresql-;
APT::VersionedKernelPackages ;
APT::VersionedKernelPackages:: linux-image;
APT::VersionedKernelPackages:: linux-headers;
APT::VersionedKernelPackages:: linux-image-extra;
APT::VersionedKernelPackages:: linux-signed-image;
APT::VersionedKernelPackages:: kfreebsd-image;
APT::VersionedKernelPackages:: kfreebsd-headers;
APT::VersionedKernelPackages:: gnumach-image;
APT::VersionedKernelPackages:: .*-modules;
APT::VersionedKernelPackages:: .*-kernel;
APT::VersionedKernelPackages:: linux-backports-modules-.*;
APT::Never-MarkAuto-Sections ;
APT::Never-MarkAuto-Sections:: metapackages;
APT::Never-MarkAuto-Sections:: restricted/metapackages;
APT::Never-MarkAuto-Sections:: universe/metapackages;
APT::Never-MarkAuto-Sections:: multiverse/metapackages;
APT::Never-MarkAuto-Sections:: oldlibs;
APT::Never-MarkAuto-Sections:: restricted/oldlibs;
APT::Never-MarkAuto-Sections:: universe/oldlibs;
APT::Never-MarkAuto-Sections:: multiverse/oldlibs;
APT::Periodic ;
APT::Periodic::Update-Package-Lists 1;
APT::Periodic::Download-Upgradeable-Packages 0;
APT::Periodic::AutocleanInterval 0;
APT::Update ;
APT::Update::Post-Invoke ;
APT::Update::Post-Invoke:: touch /var/lib/apt/periodic/update-success-stamp 
2/dev/null || true;
APT::Update::Post-Invoke-Success ;
APT::Update::Post-Invoke-Success:: /usr/bin/test -e 
/usr/share/dbus-1/system-services/org.freedesktop.PackageKit.service  
/usr/bin/test -S /var/run/dbus/system_bus_socket  /usr/bin/gdbus call 
--system --dest org.freedesktop.PackageKit --object-path 
/org/freedesktop/PackageKit --timeout 4 --method 
org.freedesktop.PackageKit.StateHasChanged cache-update  /dev/null; /bin/echo 
 /dev/null;
APT::Archives ;
APT::Archives::MaxAge 30;
APT::Archives::MinAge 2;
APT::Archives::MaxSize 500;
APT::Architectures ;
APT::Architectures:: amd64;
APT::Architectures:: i386;
APT::Compressor ;
APT::Compressor::. ;
APT::Compressor::.::Name .;
APT::Compressor::.::Extension ;
APT::Compressor::.::Binary ;
APT::Compressor::.::Cost 1;
APT::Compressor::gzip ;
APT::Compressor::gzip::Name gzip;
APT::Compressor::gzip::Extension .gz;
APT::Compressor::gzip::Binary gzip;
APT::Compressor::gzip::Cost 2;
APT::Compressor::gzip::CompressArg ;
APT::Compressor::gzip::CompressArg:: -9n;
APT::Compressor::gzip::UncompressArg ;
APT::Compressor::gzip::UncompressArg:: -d;
APT::Compressor::bzip2 ;
APT::Compressor::bzip2::Name bzip2;
APT::Compressor::bzip2::Extension .bz2;
APT::Compressor::bzip2::Binary bzip2;
APT::Compressor::bzip2::Cost 3;
APT::Compressor::bzip2::CompressArg ;
APT::Compressor::bzip2::CompressArg:: -9;
APT::Compressor::bzip2::UncompressArg ;
APT::Compressor::bzip2::UncompressArg:: -d;
APT::Compressor::xz ;
APT::Compressor::xz::Name xz;
APT::Compressor::xz::Extension .xz;
APT::Compressor::xz::Binary xz;
APT::Compressor::xz

Bug#729281: gnome-shell: Gtk POPUP style window's paint area not updated with window resize

[Wayne Rowcliffe]

Package: gnome-shell
Version: 3.10.1-1
Severity: normal

Dear Maintainer,

I have a gmail monitoring application I wrote that uses a Gtk Window
with type POPUP to show new messages.

From the window, you can mark messages as read, which causes that
message to disappear from the window. The window then shrinks itself to
fit the remaining messages.

This has worked fine for two years, however with gnome-shell 3.10 the
paint area isn't getting shrunk. The window borders are updated
properly (If the mouse leaves the window the popup disappears). However
the paint area stays its original size and the window contents are tiled
over the original area.

http://i.imgur.com/aGv6D7B.png Is a screenshot of what happens. Only the
top two messages should be showing. If I move the mouse around, the link
highlighting updates accordingly on all the repeated images (Which is
why I believe the window contents are being tiled rather than the area
just being stale)

https://github.com/war1025/gmailnotify/blob/master/gmailicon.vala#L504
That is a link to the section of code that does the resizing. I can
create a smaller test case if that would be helpful.

Thank you,
-- Wayne Rowcliffe

-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (700, 'testing'), (650, 'unstable'), (600, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages gnome-shell depends on:
ii  dconf-gsettings-backend [gsettings-backend]  0.18.0-1
ii  evolution-data-server3.10.1-2
ii  gir1.2-accountsservice-1.0   0.6.34-2
ii  gir1.2-atspi-2.0 2.10.0-1+b1
ii  gir1.2-caribou-1.0   0.4.12-1
ii  gir1.2-clutter-1.0   1.14.4-3
ii  gir1.2-freedesktop   1.38.0-1
ii  gir1.2-gcr-3 3.8.2-4
ii  gir1.2-gdm3  3.10.0.1-2
ii  gir1.2-gkbd-3.0  3.6.0-1
ii  gir1.2-glib-2.0  1.38.0-1
ii  gir1.2-gmenu-3.0 3.8.0-2
ii  gir1.2-gnomebluetooth-1.03.8.1-2
ii  gir1.2-gnomedesktop-3.0  3.10.1-2
ii  gir1.2-gtk-3.0   3.10.2-1
ii  gir1.2-ibus-1.0  1.5.3-7
ii  gir1.2-mutter-3.03.10.1-2
ii  gir1.2-networkmanager-1.00.9.8.0-5
ii  gir1.2-nmgtk-1.0 0.9.8.4-1
ii  gir1.2-pango-1.0 1.36.0-1
ii  gir1.2-polkit-1.00.105-4
ii  gir1.2-soup-2.4  2.44.1-1
ii  gir1.2-telepathyglib-0.120.22.0-1
ii  gir1.2-telepathylogger-0.2   0.8.0-2
ii  gir1.2-upowerglib-1.00.9.23-2
ii  gjs  1.38.1-1
ii  gnome-icon-theme-symbolic3.10.1-1
ii  gnome-settings-daemon3.10.1-1
ii  gnome-shell-common   3.10.1-1
ii  gnome-themes-standard3.8.4-1
ii  gsettings-desktop-schemas3.10.0-1
ii  libatk-bridge2.0-0   2.10.0-1+b1
ii  libatk1.0-0  2.10.0-2
ii  libc62.17-93
ii  libcairo-gobject21.12.16-2
ii  libcairo21.12.16-2
ii  libcamel-1.2-43  3.8.5-3
ii  libcanberra-gtk3-0   0.30-2
ii  libcanberra0 0.30-2
ii  libclutter-1.0-0 1.16.0-1
ii  libcogl-pango15  1.16.0-4
ii  libcogl151.16.0-4
ii  libcroco30.6.8-2
ii  libdbus-1-3  1.6.18-1
ii  libdbus-glib-1-2 0.100.2-1
ii  libecal-1.2-15   3.8.5-3
ii  libedataserver-1.2-173.8.5-3
ii  libegl1-mesa [libegl1-x11]   9.2.2-1
ii  libegl1-mesa-drivers 9.2.2-1
ii  libgck-1-0   3.8.2-4
ii  libgcr-base-3-1  3.8.2-4
ii  libgdk-pixbuf2.0-0   2.28.2-1
ii  libgirepository-1.0-11.36.0-2+b1
ii  libgjs0d [libgjs0-libmozjs-17.0-0]   1.38.1-1
ii  libglib2.0-0 2.38.1-2
ii  libgnome-menu-3-03.8.0-2
ii  libgstreamer1.0-01.2.0-1
ii  libgtk-3-0   3.10.2-1
ii  libical0 0.48-2
ii

Bug#729150: gnome-shell: 3.10 shell network icon does not display wireless

[Wayne Rowcliffe]

Package: gnome-shell
Version: 3.10.1-1
Severity: normal

Dear Maintainer,

I'm running 3.10 from experimental. At first the network manager wasn't
working at all, I fixed this by upgrading policykit-1 to the version in
experimental that uses systemd. Everything seems to be working now
except the network icon stays as disconnected even when I am connected
on wireless. If I connect to a vpn, the vpn icon shows up fine. I am not
sure if it is a bug in gnome-shell or network-manager. Since things were
working until I upgraded to 3.10, I am inclined to believe that it is
something in gnome-shell.

Not a huge deal, just figured I should report it.

-- Wayne Rowcliffe


-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (700, 'testing'), (650, 'unstable'), (600, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages gnome-shell depends on:
ii  dconf-gsettings-backend [gsettings-backend]  0.18.0-1
ii  evolution-data-server3.10.1-2
ii  gir1.2-accountsservice-1.0   0.6.34-2
ii  gir1.2-atspi-2.0 2.10.0-1+b1
ii  gir1.2-caribou-1.0   0.4.12-1
ii  gir1.2-clutter-1.0   1.14.4-3
ii  gir1.2-freedesktop   1.38.0-1
ii  gir1.2-gcr-3 3.8.2-4
ii  gir1.2-gdm3  3.10.0.1-2
ii  gir1.2-gkbd-3.0  3.6.0-1
ii  gir1.2-glib-2.0  1.38.0-1
ii  gir1.2-gmenu-3.0 3.8.0-2
ii  gir1.2-gnomebluetooth-1.03.8.1-2
ii  gir1.2-gnomedesktop-3.0  3.10.1-2
ii  gir1.2-gtk-3.0   3.10.2-1
ii  gir1.2-ibus-1.0  1.5.3-7
ii  gir1.2-mutter-3.03.10.1-2
ii  gir1.2-networkmanager-1.00.9.8.0-5
ii  gir1.2-nmgtk-1.0 0.9.8.4-1
ii  gir1.2-pango-1.0 1.36.0-1
ii  gir1.2-polkit-1.00.105-4
ii  gir1.2-soup-2.4  2.44.1-1
ii  gir1.2-telepathyglib-0.120.22.0-1
ii  gir1.2-telepathylogger-0.2   0.8.0-2
ii  gir1.2-upowerglib-1.00.9.23-2
ii  gjs  1.38.1-1
ii  gnome-icon-theme-symbolic3.10.1-1
ii  gnome-settings-daemon3.10.1-1
ii  gnome-shell-common   3.10.1-1
ii  gnome-themes-standard3.8.4-1
ii  gsettings-desktop-schemas3.10.0-1
ii  libatk-bridge2.0-0   2.10.0-1+b1
ii  libatk1.0-0  2.10.0-2
ii  libc62.17-93
ii  libcairo-gobject21.12.16-2
ii  libcairo21.12.16-2
ii  libcamel-1.2-43  3.8.5-3
ii  libcanberra-gtk3-0   0.30-2
ii  libcanberra0 0.30-2
ii  libclutter-1.0-0 1.16.0-1
ii  libcogl-pango15  1.16.0-4
ii  libcogl151.16.0-4
ii  libcroco30.6.8-2
ii  libdbus-1-3  1.6.18-1
ii  libdbus-glib-1-2 0.100.2-1
ii  libecal-1.2-15   3.8.5-3
ii  libedataserver-1.2-173.8.5-3
ii  libegl1-mesa [libegl1-x11]   9.2.2-1
ii  libegl1-mesa-drivers 9.2.2-1
ii  libgck-1-0   3.8.2-4
ii  libgcr-base-3-1  3.8.2-4
ii  libgdk-pixbuf2.0-0   2.28.2-1
ii  libgirepository-1.0-11.36.0-2+b1
ii  libgjs0d [libgjs0-libmozjs-17.0-0]   1.38.1-1
ii  libglib2.0-0 2.38.1-2
ii  libgnome-menu-3-03.8.0-2
ii  libgstreamer1.0-01.2.0-1
ii  libgtk-3-0   3.10.2-1
ii  libical0 0.48-2
ii  libjson-glib-1.0-0   0.16.2-1
ii  libmozjs-17.0-0  17.0.0-1
ii  libmutter0c  3.10.1-2
ii  libnm-glib4  0.9.8.0-5
ii  libnm-gtk0   0.9.8.4-1
ii  libnm-util2  0.9.8.0-5
ii  libnspr4 2:4.10.1-1
ii  libnspr4-0d  2:4.10.1-1
ii  libnss3  2

Bug#728751: libgtk-3-0: Listview scroll rendering fragments

[Wayne Rowcliffe]

Package: libgtk-3-0
Version: 3.10.2-1
Severity: normal

Dear Maintainer,

Since installing gtk 3.10 I have noticed an issue when scrolling through
lists and tables.

If the mouse is on top of the list and I scroll, the highlight styling
does not get cleaned up properly, leaving a series of partially
highlighted lines. I attempted to get a screenshot, but doing a print
screen caused the window to repaint properly.

I suspect that not enough area is getting marked as dirty when
re-rendering the list during scroll.

-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (700, 'testing'), (650, 'unstable'), (600, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages libgtk-3-0 depends on:
ii  libatk-bridge2.0-0   2.10.0-1+b1
ii  libatk1.0-0  2.10.0-2
ii  libc62.17-93
ii  libcairo-gobject21.12.16-2
ii  libcairo21.12.16-2
ii  libcolord1   1.0.2-1
ii  libcomerr2   1.42.8-1
ii  libcups2 1.6.3-1
ii  libfontconfig1   2.11.0-1
ii  libfreetype6 2.4.9-1.1
ii  libgcrypt11  1.5.3-2
ii  libgdk-pixbuf2.0-0   2.28.2-1
ii  libglib2.0-0 2.38.1-2
ii  libgnutls26  2.12.23-8
ii  libgssapi-krb5-2 1.11.3+dfsg-3
ii  libgtk-3-common  3.10.2-1
ii  libk5crypto3 1.11.3+dfsg-3
ii  libkrb5-31.11.3+dfsg-3
ii  libpango-1.0-0   1.36.0-1
ii  libpangocairo-1.0-0  1.36.0-1
ii  libpangoft2-1.0-01.36.0-1
ii  libwayland-client0   1.3.0-1
ii  libwayland-cursor0   1.3.0-1
ii  libx11-6 2:1.6.2-1
ii  libxcomposite1   1:0.4.4-1
ii  libxcursor1  1:1.1.14-1
ii  libxdamage1  1:1.1.4-1
ii  libxext6 2:1.3.2-1
ii  libxfixes3   1:5.0.1-1
ii  libxi6   2:1.7.2-1
ii  libxinerama1 2:1.1.3-1
ii  libxkbcommon00.3.1-2
ii  libxrandr2   2:1.4.1-1
ii  multiarch-support2.17-93
ii  shared-mime-info 1.0-1+b1
ii  zlib1g   1:1.2.8.dfsg-1

Versions of packages libgtk-3-0 recommends:
ii  hicolor-icon-theme  0.12-1
ii  libgtk-3-bin3.10.2-1

Versions of packages libgtk-3-0 suggests:
ii  gvfs 1.18.2-2
ii  librsvg2-common  2.40.0-1

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#728242: Another version of foo.sh

[wayne]

Further testing has revealed that there is some randomness to this 
anomaly.  Adding more versions of the attachment more reliably 
reproduces the problem on my box.  Here's a new version of the test 
script.  This uses bar0.pdf, previously attached


Why 7 versions of the attachment instead of 8?  Because at 8, the 
problem disappears (but reappears again at 9).


Regards,
Wayne Conrad

*** foo.sh

#!/bin/sh

echo 'attachment v. 1' foo
pdftk bar0.pdf attach_files foo output bar1.pdf

echo 'attachment v. 2' foo
pdftk bar1.pdf attach_files foo output bar2.pdf

echo 'attachment v. 3' foo
pdftk bar2.pdf attach_files foo output bar3.pdf

echo 'attachment v. 4' foo
pdftk bar3.pdf attach_files foo output bar4.pdf

echo 'attachment v. 5' foo
pdftk bar4.pdf attach_files foo output bar5.pdf

echo 'attachment v. 6' foo
pdftk bar5.pdf attach_files foo output bar6.pdf

echo 'attachment v. 7' foo
pdftk bar6.pdf attach_files foo output bar7.pdf

rm foo
pdftk bar7.pdf unpack_files output .
cat foo# Should print attachment v. 7


--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#728242: pdftk: reattaching file, then extracting, gives wrong version of file

[wayne]

Package: pdftk
Version: 2.01-1
Severity: normal

When replacing a file attachment with another of the same name, and
then extracting attachments, an earlier version of the attachment may
be produced.

To reproduce the problem, put foo.sh and bar0.pdf in a temporary
directory and run foo.sh:

$./foo.sh
attachment v. 1

It should have printed:

attachment v. 2

This anomaly appears to be sensitive to initial conditions.  For
example, changing the length of the attachment's filename can yield
different results.

The size of the PDF file grows with each re-attachment of the
same-named file:

$ ls bar*.pdf
-rw--w  1 wayne wayne  836 Oct 29 09:49 bar0.pdf
-rw-rw-r--  1 wayne wayne 1345 Oct 29 13:02 bar1.pdf
-rw-rw-r--  1 wayne wayne 1670 Oct 29 13:02 bar2.pdf

It is expected that the PDF grew from bar0.pdf to bar1.pdf--that's
when the attachment was initially added.  However, the growth from
bar1.pdf to bar2.pdf, when the attachment was re-added with new,
same-size contents, is unexpected.

It is acting as though:

* An attachment is not replacing an attachment of the same name, but
  instead is being added as a new attachment with the same name, and
* When multiple attachments of the same name exist, one of them is
  extracted; it may, or may not be, the most recent one added.

I do not claim, of course, that this is what is actually happening.
This is just one model that explains this behavior.

#!/bin/sh

echo 'attachment v. 1' foo
pdftk bar0.pdf attach_files foo output bar1.pdf

echo 'attachment v. 2' foo
pdftk bar1.pdf attach_files foo output bar2.pdf

rm foo
pdftk bar2.pdf unpack_files output .
cat foo# Should print attachment v. 2

-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.38-2-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages pdftk depends on:
ii  libc6   2.17-93
ii  libgcc1 1:4.8.1-10
ii  libgcj144.8.1-10
ii  libstdc++6  4.8.1-10

pdftk recommends no packages.

Versions of packages pdftk suggests:
ii  poppler-utils [xpdf-utils]  0.18.4-8

-- no debconf information



bar0.pdf
Description: Adobe PDF document

Bug#726651: Umlet GUI Hangs with missing configuration message

[Wayne Warren]

Ben,

Yes, it hangs whenever attempting to start it. This happens with or without the
$HOME/.umlet directory.

In other words, if I remove $HOME/.umlet entirely, a new $HOME/.umlet
appears and the program still hangs upon startup.

On Tue, Oct 29, 2013 at 07:24:14PM +0100, Benjamin Mesing wrote:
 Hi Wayne,
 
 what are the exact steps to reproduce the hanging? Does it happen on
 startup?
 
 Can you please try run mv $HOME/.umlet $HOME/.umlet.bak. Does umlet
 run afterwards? If yes, could you please provide me with the content of
 your $HOME/.umlet directory?
 
 Best regards
 
 Ben
 
 
 On Thu, 2013-10-17 at 18:36 +, Wayne Warren wrote:
  Package: umlet
  Version: 11.3-5.1
  Severity: normal
  
  Dear Maintainer,
  
  I just installed umlet on my new Debian Jessie installation.
  
  This installation uses the same home directory contents as previous
  installations of squeeze and wheezy.
  
  This is the output of umlet when run from a terminal emulator:
  
   $umlet
   Oct 17, 2013 11:26:31 AM jsyntaxpane.DefaultSyntaxKit loadConfig
   INFO: unable to load configuration for: class com.umlet.gui.UmletSyntaxKit 
  from: com/umlet/gui/UmletSyntaxKit/config.properties
  
  
  Please let me know if there is anything else I can do to help!
  
  -- System Information:
  Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
  Architecture: amd64 (x86_64)
  
  Kernel: Linux 3.10-3-amd64 (SMP w/4 CPU cores)
  Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
  Shell: /bin/sh linked to /bin/dash
  
  Versions of packages umlet depends on:
  ii  default-jdk [java6-sdk]1:1.7-49
  ii  jarwrapper 0.44
  ii  java-wrappers  0.1.27
  ii  libbatik-java  1.7+dfsg-3
  ii  libecj-java3.8.2-4
  ii  libfop-java1:1.1.dfsg-2
  ii  libgnumail-java1.1.2-9
  ii  libitext-java  2.1.7-7
  ii  libjlibeps-java0.1+2-2
  ii  libjsyntaxpane-java0.9.6~r156-4
  ii  liblog4j1.2-java   1.2.17-4
  ii  openjdk-7-jdk [java6-sdk]  7u21-2.3.9-5
  
  umlet recommends no packages.
  
  umlet suggests no packages.
  
  -- no debconf information
 
 


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#728142: mtx fails when autochanger has many slots

[Keseberg, Wayne]

Package: mtx
Version: 1.3.12-3
Severity: important



-- System Information:
Debian Release: 6.0.8
  APT prefers oldstable-updates
  APT policy: (500, 'oldstable-updates'), (500, 'oldstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages mtx depends on:
ii  libc6 2.11.3-4   Embedded GNU C Library: Shared lib

mtx recommends no packages.

mtx suggests no packages.

-- no debconf information

When the autochanger/library contains more than about 24574 total elements 
(slots+drives+mailslots),
mtx fails.  This is probably due to running over its buffer.  Could mtx be 
enhanced to iteratively issue Read Element Status for some reasonable number of 
elements, bumping up starting element number?  Then there will be
no dependency on mtx' buffer size.


root@wkdebian:~# mtx -f /dev/sg6 status|more
mtx: Request Sense: Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=0 (Unknown?!)
mtx: Request Sense: Sense Key=No Sense
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 00
mtx: Request Sense: Additional Sense Qualifier = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=no
READ ELEMENT STATUS Command Failed
root@wkdebian:~#
root@wkdebian:~#


--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#728147: udev does not set up persistent devices for tape drives

[Wayne Keseberg]

Package: udev
Version: 164-3
Severity: normal



-- System Information:
Debian Release: 6.0.8
  APT prefers oldstable-updates
  APT policy: (500, 'oldstable-updates'), (500, 'oldstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages udev depends on:
ii  debconf [debconf-2.0]   1.5.36.1 Debian configuration management sy
ii  libc6   2.11.3-4 Embedded GNU C Library: Shared lib
ii  libselinux1 2.0.96-1 SELinux runtime shared libraries
ii  libudev0164-3libudev shared library
ii  libusb-0.1-42:0.1.12-16  userspace USB programming library
ii  lsb-base3.2-23.2squeeze1 Linux Standard Base 3.2 init scrip
ii  util-linux  2.17.2-9 Miscellaneous system utilities

Versions of packages udev recommends:
ii  pciutils  1:3.1.7-6  Linux PCI Utilities
ii  usbutils  0.87-5squeeze1 Linux USB utilities

udev suggests no packages.

-- debconf information excluded

Even though system has tape drives, there are no device files in 
/dev/tape/by-id for tape drives.  (There are for autochangers/libraries.)
Could udev be enhanced so that tape drives also have entries in /dev/tape/by-id?
Other newer Linux operating systems like SuSE and RedHat do this.

I think the changes in question would be to 60-persistent-storage-tape.rules.

KERNEL==st*[0-9]|nst*[0-9],   ENV{ID_SERIAL}!=?*, \
ENV{ID_BUS}=scsi, \
IMPORT{program}=scsi_id --export --sg-version=3 --whitelisted  
--device=$tempnode

# changed to seperate into nonrewinding and not
KERNEL==st*[0-9], ENV{ID_SERIAL}==?*, \
SYMLINK+=tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}
KERNEL==nst*[0-9],ENV{ID_SERIAL}==?*, \
SYMLINK+=tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#726651: Umlet GUI Hangs with missing configuration message

[Wayne Warren]

Package: umlet
Version: 11.3-5.1
Severity: normal

Dear Maintainer,

I just installed umlet on my new Debian Jessie installation.

This installation uses the same home directory contents as previous
installations of squeeze and wheezy.

This is the output of umlet when run from a terminal emulator:

 $umlet
 Oct 17, 2013 11:26:31 AM jsyntaxpane.DefaultSyntaxKit loadConfig
 INFO: unable to load configuration for: class com.umlet.gui.UmletSyntaxKit 
from: com/umlet/gui/UmletSyntaxKit/config.properties


Please let me know if there is anything else I can do to help!

-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.10-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages umlet depends on:
ii  default-jdk [java6-sdk]1:1.7-49
ii  jarwrapper 0.44
ii  java-wrappers  0.1.27
ii  libbatik-java  1.7+dfsg-3
ii  libecj-java3.8.2-4
ii  libfop-java1:1.1.dfsg-2
ii  libgnumail-java1.1.2-9
ii  libitext-java  2.1.7-7
ii  libjlibeps-java0.1+2-2
ii  libjsyntaxpane-java0.9.6~r156-4
ii  liblog4j1.2-java   1.2.17-4
ii  openjdk-7-jdk [java6-sdk]  7u21-2.3.9-5

umlet recommends no packages.

umlet suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#725371: partman-ext3: Can't change mount options for ext4

[Wayne Warren]

Package: partman-ext3
Version: 79
Severity: normal
Tags: d-i

Dear Maintainer,

I was installing Debian Jessie from the following ISO:

 Debian GNU/Linux testing Jessie - Official Snapshot amd64 xfce-CD
   Binary-1 20130930-05:46

(text grabbed from README.txt on the cdrom)

When attempting to choose the Mount Options: menu item for an ext4 partition
while manually partitioning my drive, I noticed that the checkbox menu that
allows the selection of mount options for other partition types (ext3, for
example) does not appear.

Instead, the screen blinks white real quick then returns to the menu for
modifying that particular partition with the same Mount Options: menu option
selected.

It's possible I have done something wrong up to this point, but as far as I can
tell the option checklist should appear just as it does for ext3 for example.

It is possible that this is more directly related to partman-base, but I chose
to report against partman-ext3 since it is specifically the ext4 menu option
that seems broken. Let me know if there is any other information I can get or
anything else I can do to help out.

-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.10-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#721883: telepathy-gabble: Facebook chat authorization error

[Wayne Rowcliffe]

Package: telepathy-gabble
Version: 0.18.0-1
Severity: important

Dear Maintainer,

   * What led up to the situation?
  Facebook chat has been acting weird for a couple weeks now.
  Previously it would replace the users' names with what I assume
  are their jabber ids.
  As of a day or two ago (beginning of September 2013) it no longer
  logs in at all. It claims there is an authorization error.


-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (700, 'testing'), (650, 'unstable'), (600, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages telepathy-gabble depends on:
ii  libc6   2.17-92
ii  libdbus-1-3 1.6.12-1
ii  libdbus-glib-1-20.100.2-1
ii  libglib2.0-02.36.4-1
ii  libgnutls26 2.12.23-6
ii  libnice10   0.1.4-1
ii  libsoup2.4-12.42.2-6
ii  libsqlite3-03.7.17-1
ii  libtelepathy-glib0  0.20.4-1
ii  libxml2 2.9.1+dfsg1-3

telepathy-gabble recommends no packages.

telepathy-gabble suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#716846: gnome-settings-daemon: g-s-d 3.8 hibernate does not work

[Wayne Rowcliffe]

Package: gnome-settings-daemon
Version: 3.8.3-1+b1
Severity: important

Dear Maintainer,

I am running gnome 3.8, including gnome-settings-daemon 3.8.
In 3.8, there is a hard dependency on systemd. This includes calls to
systemd's hibernate and suspend scripts for the power management.

Debian does not have a properly up to date version of systemd, also
there is some push-back as to whether debian should fully adopt systemd.

I think it would make sense to either make this action configurable or
revert to using the previous pm-utils / upower system.

Currently none of the system's hibernate / suspend functionalities work,
including shutting down the system when the battery is critically low or
when the power button is pressed / lid is closed.


-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (700, 'testing'), (650, 'unstable'), (600, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.9-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages gnome-settings-daemon depends on:
ii  dconf-gsettings-backend [gsettings-backend]  0.16.0-4
ii  gsettings-desktop-schemas3.8.0-1
ii  libatk1.0-0  2.8.0-2
ii  libc62.17-7
ii  libcairo-gobject21.12.14-5
ii  libcairo21.12.14-5
ii  libcanberra-gtk3-0   0.30-2
ii  libcanberra0 0.30-2
ii  libcolord1   1.0.1-1
ii  libcomerr2   1.42.5-1.1
ii  libcups2 1.6.2-10
ii  libfontconfig1   2.10.2-2
ii  libgcrypt11  1.5.2-3
ii  libgdk-pixbuf2.0-0   2.28.2-1
ii  libglib2.0-0 2.36.3-3
ii  libgnome-desktop-3-7 3.8.3-1
ii  libgnutls26  2.12.23-5
ii  libgssapi-krb5-2 1.10.1+dfsg-6.1
ii  libgtk-3-0   3.8.2-3
ii  libgudev-1.0-0   175-7.2
ii  libk5crypto3 1.10.1+dfsg-6.1
ii  libkrb5-31.10.1+dfsg-6.1
ii  liblcms2-2   2.2+git20110628-2.2
ii  libnotify4   0.7.5-2
ii  libpackagekit-glib2-16   0.8.9-2
ii  libpango-1.0-0   1.32.5-5+b1
ii  libpangocairo-1.0-0  1.32.5-5+b1
ii  libpulse-mainloop-glib0  2.0-6.1
ii  libpulse02.0-6.1
ii  librsvg2-2   2.36.4-2
ii  libsqlite3-0 3.7.17-1
ii  libupower-glib1  0.9.20-2
ii  libwacom20.7-1
ii  libx11-6 2:1.6.0-1
ii  libxext6 2:1.3.2-1
ii  libxfixes3   1:5.0.1-1
ii  libxi6   2:1.7.1.901-1
ii  libxkbfile1  1:1.0.8-1
ii  libxtst6 2:1.2.1-1+deb7u1
ii  nautilus-data3.8.0-1
ii  systemd  44-12
ii  zlib1g   1:1.2.8.dfsg-1

Versions of packages gnome-settings-daemon recommends:
ii  pulseaudio  2.0-6.1

Versions of packages gnome-settings-daemon suggests:
ii  gnome-screensaver3.6.0-1+b1
ii  metacity [x-window-manager]  1:2.34.13-1
ii  twm [x-window-manager]   1:1.0.6-1
ii  x11-xserver-utils7.7~3

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#693501: Debian Bug 693501 - lightdm-gtk-greeter: Kernel panic with lightdm-gtk-greeter and Intel845g

[Wayne Knorr]

I am getting the same error on an IBM NetVista (machine type-model 8303-52U) 
that has an integrated Intel 845G video adapter.  It freezes on each reboot 
unless I select recovery mode.

I installed linux-image-3.2.0-4-686-pae_3.2.29-1_i386.deb and still get the 
same problem so that seems to be where it is first introduced.  If I boot from 
3.2.23-1 it gets further.

Regards,

 Wayne

Bug#687533: ITP: python-xpresser -- Xpresser, Python library to automate GUI testing

[Chris Wayne]

Package: wnpp
Severity: wishlist
Owner: Chris Wayne chris.wa...@canonical.com

* Package name : python-xpresser
Version : 1.1.4
Upstream Author : Xpresser Team
* URL : http://xpresser.com
* License : LGPL3
Programming Lang : Python
Description : Python library to automate GUI testing

Xpresser is a python library to automate GUI testing.  It uses
screenshot matching to make automation easy, and can emulate actual user
testing, rather than through introspection.
.


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#662720: sozi: get failed to load canberra-gtk-module dialog when selecting the Sozi extension in inkscape

[Wayne Warren]

Package: sozi
Version: 11.07-1
Severity: normal
Tags: upstream

Dear Maintainer,

   * What led up to the situation?
I tried to select the Sozi extension in inkscape.
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
I installed libcanberra-gtk-module.
   * What was the outcome of this action?
This prevented the problem from recurring
   * What outcome did you expect instead?
This is what I expected! Or maybe I expect the libcanberra-gtk-module to be a
recommends for sozi (and inkscape too, for that matter)...but I don't really
have a good comprehension of the Debian Packaging Policy so...yeah. If nothing
is done as a result of this (for instance if it is decided not to add
libcanberra-gtk-module as a recommends for sozi) could I have a short
explanation? If I don't get one, I will probably just read some documentation
until I understand.



-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.1.0-rc5trillhelm+ (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages sozi depends on:
ii  inkscape 0.48.1-2.1+b1
ii  python   2.7.2-10
ii  python-gtk2  2.24.0-3

sozi recommends no packages.

sozi suggests no packages.

-- no debconf information
attachment: 2012-03-05-175327_406x238_sozi-failure.png

Bug#654787: RFP: oxygen-transparent -- KDE Oxygen style and decoration with support for transparency

[Kenneth Wayne Foy, Jr]

Package: wnpp
Severity: wishlist

* Package name: oxygen-transparent
  Version : 1
  Upstream Author : Hugo Pereira h...@oxygen-icons.org
* URL : http://kde-look.org/content/show.php?content=127752
* License : GPL
  Programming Lang: I guess C++.
  Description : KDE Oxygen style and decoration with support for
transparency

This is an official branch of the KDE oxygen style. It is kept in sync with the
official oxygen style, and adds support of full transparency on the windows. In
the near future, oxygen-transparent will have monthly numbered releases, to
follow the same policy as KDE, and oxygen-gtk. The style (and decoration)
should work for KDE 4.5 and above. The installed code does not erase the
official Oxygen installation, and users can select Oxygen Transparent from the
relevant widget style and window decoration page of the KDE system settings
dialog.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#652306: pulseaudio: cannot select different master channel

[Kenneth Wayne Foy Jr]

Package: pulseaudio
Version: 1.0-4
Severity: grave
Tags: d-i
Justification: renders package unusable

Dear Maintainer,
After I install Debian testing with a KDE environment, my volume is too loud.
When I try to turn it down, the screen tells me that the level is going down,
but the sound doesn't change until the level is almost to mute. Then, the sound
gets too quiet, so the sound is either too loud, too quiet or muted with a lot
of space in between where the volume doesn't change.

When I right-click the volume (KMix) to investigate and select another master
channel, there is only one channel listed: Internal Audio Analog Stereo. 
Changing
the Current Mixer option doesn't give me more channels. When I run alsamixer in
a terminal, there's only one channel: Master. If I remove pulseaudio and log out
or restart kdm or the computer (can't remember which), KMix then has several
channels to choose from, and alsamixer has about a dozen channels as well. Then,
I can pick one—like PCM—which has the full range of volume.

My computer is several years old, and its sound jack on the back is actually a
headphone jack. The Master and Headphone channels also affect the volume after
removing pulseaudio.

Regards,
Kete

-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 3.1.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages pulseaudio depends on:
ii  adduser 3.113
ii  consolekit  0.4.5-1
ii  libasound2  1.0.24.1-4
ii  libasound2-plugins  1.0.24-3
ii  libc6   2.13-21
ii  libcap2 1:2.22-1
ii  libdbus-1-3 1.4.16-1
ii  libfftw3-3  3.3-1
ii  libice6 2:1.0.7-2
ii  libltdl72.4.2-1
ii  liborc-0.4-01:0.4.16-1
ii  libpulse0   1.0-4
ii  libsamplerate0  0.1.8-1
ii  libsm6  2:1.2.0-2
ii  libsndfile1 1.0.25-3
ii  libspeexdsp11.2~rc1-1
ii  libtdb1 1.2.9-4+b1
ii  libudev0175-3
ii  libx11-62:1.4.4-4
ii  libx11-xcb1 2:1.4.4-4
ii  libxcb1 1.7-4
ii  libxtst62:1.2.0-4
ii  lsb-base3.2-28
ii  udev175-3

Versions of packages pulseaudio recommends:
ii  gstreamer0.10-pulseaudio  0.10.30-2
ii  pulseaudio-esound-compat  1.0-4
ii  pulseaudio-module-x11 1.0-4
ii  rtkit 0.10-2

Versions of packages pulseaudio suggests:
ii  paman none
ii  paprefs   none
ii  pavucontrol   none
ii  pavumeter none
ii  pulseaudio-utils  1.0-4

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#650841: update-manager: Could not initialize package information on Alpha

[Wayne Rossberg]

Package: update-manager
Followup-For: Bug #650841


Update-manager fails with the following error message:

--
Could not initialize the package information

A unresolvable problem occured while initializing the package
information.

Please report this bug against the 'update-manager' package
and include the following error message:

'E:Encountered a section with no Package: header, E:Problem
with MergeList /var/lib/apt/lists/
security.debian.org_dists_lenny_updates_main_binary-
alpha_Packages, E:The package lists or status file could not
be parsed or open.'
--

This report is in response to the above instruction.

-- System Information:
Debian Release: 5.0.9
Architecture: alpha

Kernel: Linux 2.6.26-2-alpha-generic
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages update-manager depends on:
ii  gconf2   2.22.0-1GNOME configuration database syste
ii  libgnome2-perl   1.042-1+b1  Perl interface to the GNOME librar
ii  python   2.5.2-3 An interactive high-level object-o
ii  python-dbus  0.82.4-2simple interprocess messaging syst
ii  python-glade22.12.1-6GTK+ bindings: Glade support
ii  python-gnome22.22.0-1Python bindings for the GNOME desk
ii  python-support   0.8.4lenny2 automated rebuilding support for P
ii  python-vte   1:0.16.14-4 Python bindings for the VTE widget
ii  software-properties-gtk  0.60.debian-1.1 manage the repositories that you i
ii  synaptic 0.62.1+nmu1 Graphical package manager
ii  update-manager-core  0.68.debian-7   APT update manager core functional

update-manager recommends no packages.

Versions of packages update-manager suggests:
ii  update-notifier  0.70.7.debian-5 Daemon which notifies about packag

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#635375: Auth_MySQL_Password_Clause

[wayne]

Hi again,

I've just read that Auth_MySQL_Password_Clause can be used for that (but which I
haven't check yet):

Auth_MySQL_Password_Clause SQL fragment
Adds arbitrary clause to username:password matching query, for example:
 AND Allowed=1. Clause has to start with space. Default is empty.

So, seems like it's just a documentation issue :)

Bye,
Werner




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#627223: dicomscope: Java exception on start up.

[Wayne Stambaugh]

Package: dicomscope
Version: 3.6.0-5
Severity: important

Running dicomscope generated the following Jave exception:

Exception in thread main java.lang.NoClassDefFoundError:
dicomscope/DICOMscope
Caused by: java.lang.ClassNotFoundException: dicomscope.DICOMscope
at java.net.URLClassLoader$1.run(URLClassLoader.java:217)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:205)
at java.lang.ClassLoader.loadClass(ClassLoader.java:321)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294)
at java.lang.ClassLoader.loadClass(ClassLoader.java:266)
Could not find the main class: dicomscope/DICOMscope. Program will exit.


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (900, 'testing'), (400, 'unstable'), (100, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages dicomscope depends on:
ii  default-jre [java2-runti 1:1.6-40Standard Java or Java
compatible R
ii  gcj-4.4-jre [java2-runti 4.4.6-2 Java runtime environment
using GIJ
ii  gcj-4.6-jre [java2-runti 4.6.0-3 Java runtime environment
using GIJ
ii  gcj-jre [java2-runtime]  4:4.6.0-5   Java runtime environment
using GIJ
ii  libc62.13-4  Embedded GNU C Library:
Shared lib
ii  libdcmtk23.6.0-5 The OFFIS DICOM toolkit
runtime li
ii  libgcc1  1:4.6.0-7   GCC support library
ii  libssl0.9.8  0.9.8o-7SSL shared libraries
ii  libssl1.0.0  1.0.0d-2SSL shared libraries
ii  libstdc++6   4.6.0-7 The GNU Standard C++ Library v3
ii  libxml2  2.7.8.dfsg-2+b1 GNOME XML library
ii  openjdk-6-jre [java2-run 6b18-1.8.7-3OpenJDK Java runtime, using
Hotspo
ii  tk8.48.4.19-4Tk toolkit for Tcl and X11,
v8.4 -

dicomscope recommends no packages.

dicomscope suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#606084: ITA: wmii -- lightweight tabbed and tiled X11 window manager, version 3

[wayne, steve]

Hi,

I am emailing to inquire after the status of this ITA. Do you still intend
to pursue the management of this package? If not, I would like to express my
own interest. Thanks,

--
Wayne S. Warren
steven.w.war...@gmail.com

Bug#626090: RFP: opendias -- Document Imaging Archive System

[Wayne Booth]

Package: wnpp
Severity: wishlist


* Package name: opendias
  Version : 0.6.2
  Upstream Author : Wayne Booth wbo...@clearscene.net
* URL : http://sf.net/projects/opendias
* License : GPL
  Programming Lang: C  Javascript
  Description : Document Imaging Archive System



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#625267: binutils: Relocation problem when building a shared library on an Alpha

[Wayne Rossberg]

Package: binutils
Version: 2.18.1~cvs20080103-7
Severity: normal


While attempting to run Firefox 4.0 on a DEC Alpha, after finally 
succeeding in building it from sources, the program fails with a SIGILL. 
Upon further investigation it appears the problem is due to an incorrect 
relocation during the construction of the shared library libxul.so. 

The following is an exerpt from an objdump of the object file resulting 
from the compilation of the C++ file 
mozilla-2.0/xpcom/base/nsCycleCollector.cpp showing the generated code 
in which the relocation problem occurs: 

0c6c _ZN16nsCycleCollectorC1Ev:
 c6c:   00 00 bb 27 ldahgp,0(t12)
c6c: GPDISP .text+0x4
 c70:   00 00 bd 23 lda gp,0(gp)
 c74:   f0 ff de 23 lda sp,-16(sp)
 c78:   00 00 3d a4 ldq t0,0(gp)
c78: ELF_LITERAL
_ZTV29nsCycleCollectionXPCOMRuntime+0x10
 c7c:   08 00 3e b5 stq s0,8(sp)
 c80:   09 04 f0 47 mov a0,s0
 c84:   00 00 5e b7 stq ra,0(sp)
 c88:   a8 00 29 22 lda a1,168(s0)
 c8c:   78 00 29 b4 stq t0,120(s0)
 c90:   c0 00 10 22 lda a0,192(a0)
 c94:   01 00 3f 20 lda t0,1
 c98:   00 00 e9 b3 stl zero,0(s0)
 c9c:   10 00 29 b0 stl t0,16(s0)
 ca0:   04 00 e9 b3 stl zero,4(s0)
 ca4:   0c 00 e9 b3 stl zero,12(s0)
 ca8:   80 00 e9 b7 stq zero,128(s0)
 cac:   88 00 e9 b7 stq zero,136(s0)
 cb0:   90 00 e9 b7 stq zero,144(s0)
 cb4:   98 00 e9 b7 stq zero,152(s0)
 cb8:   a0 00 e9 b3 stl zero,160(s0)
 cbc:   a8 00 e9 b3 stl zero,168(s0)
 cc0:   b0 00 e9 b7 stq zero,176(s0)
 cc4:   b8 00 e9 b3 stl zero,184(s0)
 cc8:   00 00 7d a7 ldq t12,0(gp)
cc8: ELF_LITERAL
_ZN14nsPurpleBufferC1ER22nsCycleCollectorParams
 ccc:   00 40 5b 6b jsr ra,(t12),cd0 
_ZN16nsCycleCollectorC1Ev+0x64
ccc: LITUSE .text+0x3
ccc: HINT   
_ZN14nsPurpleBufferC1ER22nsCycleCollectorParams
 cd0:   00 00 ba 27 ldahgp,0(ra)
cd0: GPDISP .text+0x4
 cd4:   00 00 bd 23 lda gp,0(gp)
 cd8:   20 00 09 22 lda a0,32(s0)
 cdc:   00 00 7d a7 ldq t12,0(gp)
cdc: ELF_LITERALmemset
 ce0:   11 04 ff 47 clr a1
 ce4:   58 00 5f 22 lda a2,88
 ce8:   00 40 5b 6b jsr ra,(t12),cec 
_ZN16nsCycleCollectorC1Ev+0x80
ce8: LITUSE .text+0x3
ce8: HINT   memset
 cec:   00 00 ba 27 ldahgp,0(ra)
cec: GPDISP .text+0x10
 cf0:   78 00 29 20 lda t0,120(s0)
 cf4:   28 00 29 b4 stq t0,40(s0)
 cf8:   00 00 5e a7 ldq ra,0(sp)
 cfc:   00 00 bd 23 lda gp,0(gp)
 d00:   08 00 3e a5 ldq s0,8(sp)
 d04:   10 00 de 23 lda sp,16(sp)
 d08:   01 80 fa 6b ret

Of concern is the code from offset cc8: through offset cd4: (a call to 
another C++ function) which results in the ultimate failure upon 
execution of the jsr instruction at offset ce8: (a call to the function 
memset). The following is an exerpt of an objdump of the corresponding 
code in the shared library libxul.so showing the final relocated 
function: 

016993a0 _ZN16nsCycleCollectorC1Ev:
 16993a0:   cc 00 bb 27 ldahgp,204(t12)
 16993a4:   58 1e bd 23 lda gp,7768(gp)
 16993a8:   f0 ff de 23 lda sp,-16(sp)
 16993ac:   28 f2 3d a4 ldq t0,-3544(gp)
 16993b0:   08 00 3e b5 stq s0,8(sp)
 16993b4:   09 04 f0 47 mov a0,s0
 16993b8:   00 00 5e b7 stq ra,0(sp)
 16993bc:   a8 00 29 22 lda a1,168(s0)
 16993c0:   78 00 29 b4 stq t0,120(s0)
 16993c4:   c0 00 10 22 lda a0,192(a0)
 16993c8:   01 00 3f 20 lda t0,1
 16993cc:   00 00 e9 b3 stl zero,0(s0)
 16993d0:   10 00 29 b0 stl t0,16(s0)
 16993d4:   04 00 e9 b3 stl zero,4(s0)
 16993d8:   0c 00 e9 b3 stl zero,12(s0)
 16993dc:   80 00 e9 b7 stq zero,128(s0)
 16993e0:   88 00 e9 b7 stq zero,136(s0)
 16993e4:   90 00 e9 b7 stq zero,144(s0)
 16993e8:   98 00 e9 b7 stq zero,152(s0)
 16993ec:   a0 00 e9 b3 stl zero,160(s0)
 16993f0:   a8 00 e9 b3 stl zero,168(s0)
 16993f4:   b0 00 e9 b7 stq zero,176(s0)
 16993f8:   b8 00 e9 b3 stl zero,184(s0)
 16993fc:   00 00 fe 2f unop
 1699400:   a9 06 40 d3 bsr ra,169aea8 

Bug#624462: installation-report: flawless installation

[Kenneth Wayne Foy Jr]

Package: installation-reports
Version: 2.44
Severity: normal
Tags: d-i

fast and fun

-- Package-specific info:

Boot method: USB stick
Image version: 
http://cdimage.debian.org/debian-cd/6.0.1a/i386/iso-cd/debian-6.0.1a-i386-businesscard.iso
Date: Date and time of the install

Machine: Dell Inspiron 6000
Partitions:
FilesystemType   1K-blocks  Used Available Use% Mounted on
/dev/sda1 ext3  330215115563197603  37% /
tmpfstmpfs 1037328 0   1037328   0% /lib/init/rw
udev tmpfs 1035880   208   1035672   1% /dev
tmpfstmpfs 1037328 0   1037328   0% /dev/shm
/dev/sda9 ext3 6877976169408   6359180   3% /home
/dev/mapper/sda8_crypt
  ext2  960504  1276910436   1% /tmp
/dev/sda5 ext312495016641436  11218856   6% /usr
/dev/sda6 ext314417392320704  13364324   3% /var


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:   [O]
Detect network card:[O]
Configure network:  [O]
Detect CD:  [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives:  [O]
Install base system:[O]
Clock/timezone setup:   [O]
User/password setup:[O]
Install tasks:  [O]
Install boot loader:[O]
Overall install:[O]

Comments/Problems:

Description of the install, in prose, and any thoughts, comments
  and ideas you had during the initial install.


-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to sub...@bugs.debian.org.

==
Installer lsb-release:
==
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION=Debian GNU/Linux installer
DISTRIB_RELEASE=6.0 (squeeze) - installer build 20110106+squeeze1
X_INSTALLATION_MEDIUM=cdrom

==
Installer hardware-summary:
==
uname -a: Linux notebook 2.6.32-5-486 #1 Tue Mar 8 21:03:02 UTC 2011 i686 
GNU/Linux
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 
915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
lspci -knn: Subsystem: Dell Device [1028:0188]
lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM 
Express PCI Express Root Port [8086:2591] (rev 03)
lspci -knn: Kernel driver in use: pcieport
lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
lspci -knn: Subsystem: Dell Device [1028:0188]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
lspci -knn: Subsystem: Dell Device [1028:0188]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.2 USB Controller [0c03]: Intel Corporation 
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
lspci -knn: Subsystem: Dell Device [1028:0188]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.3 USB Controller [0c03]: Intel Corporation 
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
lspci -knn: Subsystem: Dell Device [1028:0188]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.7 USB Controller [0c03]: Intel Corporation 
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
lspci -knn: Subsystem: Dell Device [1028:0188]
lspci -knn: Kernel driver in use: ehci_hcd
lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI 
Bridge [8086:2448] (rev d3)
lspci -knn: 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
lspci -knn: Subsystem: Dell Device [1028:0188]
lspci -knn: 00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 
Family) AC'97 Modem Controller [8086:266d] (rev 03)
lspci -knn: Subsystem: Conexant Systems, Inc. Device [14f1:5423]
lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC 
Interface Bridge [8086:2641] (rev 03)
lspci -knn: Subsystem: Dell Device [1028:0188]
lspci -knn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) 
SATA Controller [8086:2653] (rev 03)
lspci -knn: Subsystem: Dell Device [1028:0188]
lspci -knn: Kernel driver in use: ata_piix
lspci -knn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M22 
[Mobility Radeon X300] [1002:5460]
lspci -knn: Subsystem: Dell Device [1028:2003]
lspci -knn: 03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 
100Base-TX [14e4:170c] (rev 02)
lspci -knn: Subsystem: Dell Device 

Bug#623856: String overscan issues in ssmtp (potential for memory corruption)

[Wayne Davison]

Package: ssmtp
Version: 2.64-4

I have a patch that fixes several issues with the parsing of the From
line where a string scan could go off the end or the beginning of the
string.  For instance, if it finds a '(' (on a From line w/o a
''...'' bounded addr), it will scan past the end if no ')' is found.
 If a trailing is ')' is found, it will scan past the beginning if no
'(' is found.  And the trailing-space stripping function has a bug
that makes it unsafe if called on an empty (or white-space only)
string (e.g. the parsing of a From line that has only trailing spaces
could trigger that bug).

In each failure case the code can potentially write a zero byte
somewhere outside of the string's memory, possibly corrupting malloc
pointers or other nearby data.  In the addr_parse() case there is also
the potential to return a random section of memory as the parsed
address.

My patch for these issues is here:  http://opencoder.net/ssmtp-overscan.patch

..wayne..



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#614734: libc6.1-dev: #include math.h from gcc on a DEC Alpha does not declare function `round'

[Wayne Rossberg]

Package: libc6.1-dev
Version: 2.7-18lenny7
Severity: normal


When compiling the file test.c containing:

#include math.h

double test(double x)
{
   return round(x);
}

using gcc 4.2.4-6 on a DEC Alpha machine produces the following result:

test.c In function `test':
test.c:5: warning: incompatible implicit declaration of built-in 
function `round'

Upon examining the output from the command (i.e., the file temp.tmp):

gcc -E -o temp.tmp test.c

There is no declaration of the `round' function yet, as far as I can 
determine, such a declaration should be present because it is in 
/usr/include/math.h via the include of /usr/include/bits/mathcalls.h.

If I put an explicit declaration for `round' in test.c, no warning is 
reported.

-- System Information:
Debian Release: 5.0.8
  APT prefers oldstable
  APT policy: (500, 'oldstable')
Architecture: alpha

Kernel: Linux 2.6.26-2-alpha-generic
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages libc6.1-dev depends on:
ii  libc6.1  2.7-18lenny7GNU C Library: Shared libraries
ii  linux-libc-dev   2.6.26-26lenny2 Linux support headers for userspac

Versions of packages libc6.1-dev recommends:
ii  gcc [c-compiler]  4:4.2.4-5  The GNU C compiler
ii  gcc-4.2 [c-compiler]  4.2.4-6The GNU C compiler
ii  gcc-4.3 [c-compiler]  4.3.2-1.1  The GNU C compiler

Versions of packages libc6.1-dev suggests:
ii  glibc-doc   2.7-18lenny7 GNU C Library: Documentation
pn  manpages-devnone   (no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#612929: ITP: infinitypfm -- a personal finance manager.

[Wayne Gray]

Package: wnpp
Severity: wishlist
Owner: Wayne Gray wg...@infinitypfm.org

* Package name: infinitypfm
  Version : 0.5.0
  Upstream Author : Wayne Gray wg...@infinitypfm.org
* URL : http://www.infinitypfm.org/
* License : GPLv3
  Programming Lang: Java
  Description : Infinity PFM is a personal finance manager.

Infinity PFM is a personal finance manager that includes budgeting,
multiple currencies, color reports, and charts.  Supported import
formats are OFX, QFX, QIF, and direct import from the Bitcoin client.

The project currenty has a Launchpad PPA available at
ppa:mogray5/ppa-infinitypfm.

The deb installer for the application at 
http://launchpad.net/infinitypfm/0.5/0.5.0rc1/+download/infinitypfm-ui_0.5.0-1ppa1_all.deb
 
works on Debian Squeeze.

Two external dependencies exit from these projects:

http://www.json.org/java/ 
http://sourceforge.net/projects/bitcoin-client/ 

They do not appear to be available in the repository.  Not sure
if I can keep them as I have them or if I'll need to break them
out into their own packages.





-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#608358: iceweasel crashes with segmentation fault loading http://www.rideuta.com

[Wayne Rossberg]

Package: iceweasel
Version: 3.0.6-3
Severity: important


The program fails with Segmentation fault when run with the following
command:

   iceweasel http://www.rideuta.com

A similar failure happens when linking to the above URL from some other
page. The URL http://www.slashdot.org also fails, but only after loading
some of the page header graphics.

The program behaves the same whether in safe mode or not.

Here is the backtrace for the command:

   iceweasel -g http://www.rideuta.com 21 | tee trace.tmp

GNU gdb 6.8-debian
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type show copying
and show warranty for details.
This GDB was configured as alpha-linux-gnu...
(no debugging symbols found)
(gdb) set pagination off
(gdb) run
Starting program: /usr/lib/iceweasel/firefox-bin -a iceweasel 
http://www.rideuta.com
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
Error while reading shared library symbols:
Cannot find new threads: generic error
Cannot find new threads: generic error
(gdb) continue
Continuing.
[New Thread 0x2025d40 (LWP 2806)]
[New Thread 0x200043df250 (LWP 2809)]
[New Thread 0x20004c21250 (LWP 2811)]
[New Thread 0x200054bf250 (LWP 2812)]
[Thread 0x200054bf250 (LWP 2812) exited]
[New Thread 0x20005cbf250 (LWP 2813)]
[Thread 0x20005cbf250 (LWP 2813) exited]
[New Thread 0x20005cbf250 (LWP 2814)]
[New Thread 0x200054bf250 (LWP 2815)]
[New Thread 0x20006579250 (LWP 2816)]
[New Thread 0x20006d79250 (LWP 2817)]
[Thread 0x200054bf250 (LWP 2815) exited]
[Thread 0x20005cbf250 (LWP 2814) exited]
[Thread 0x20006579250 (LWP 2816) exited]
[New Thread 0x200054bf250 (LWP 2818)]
[Thread 0x200054bf250 (LWP 2818) exited]
[New Thread 0x20005cbf250 (LWP 2819)]
[New Thread 0x200054bf250 (LWP 2820)]
[New Thread 0x20006579250 (LWP 2821)]
[New Thread 0x20007957250 (LWP 2822)]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x2025d40 (LWP 2806)]
0x020001468268 in nsCOMPtr_base::assign_with_AddRef (this=0x11ff10d90, 
rawPtr=0x0) at ./../glue/nsCOMPtr.h:531
531 ./../glue/nsCOMPtr.h: No such file or directory.
in ./../glue/nsCOMPtr.h
Current language:  auto; currently c++
(gdb) bt full
#0  0x020001468268 in nsCOMPtr_base::assign_with_AddRef (this=0x11ff10d90, 
rawPtr=0x0) at ./../glue/nsCOMPtr.h:531
No locals.
#1  0x02a44a14 in nsConverterInputStream::Close (this=0x11ff10d78) at 
../../../dist/include/xpcom/nsCOMPtr.h:713
rv = 555487184
#2  0x02dba480 in nsHTMLFormElement::WalkRadioGroup (this=0x1213692a0, 
ana...@0x11ff10df0, aVisitor=0x12138dd10, aFlushContent=0) at 
../../../../dist/include/xpcom/nsCOMPtr.h:950
item = {nsCOMPtr_base = {mRawPtr = 0x0}, No data fields}
stopIterating = 0
#3  0x02dce68c in nsHTMLInputElement::VisitGroup (this=0x1211c0fd0, 
aVisitor=0x12138dd10, aFlushContent=0) at nsHTMLInputElement.cpp:2976
name = {nsFixedString = {nsString = {nsAString_internal = 
{nsSubstring_base = {No data fields}, mData = 0x11ff10e10, mLength = 16, 
mFlags = 65553}, No data fields}, mFixedCapacity = 63, mFixedBuf = 
0x11ff10e10}, mStorage = {99, 116, 108, 48, 48, 36, 116, 105, 109, 101, 82, 97, 
100, 105, 111, 115, 0, 8476, 1, 0, 3800, 8177, 1, 0, 4096, 8476, 1, 0, 37536, 
8502, 1, 0, 0, 0, 0, 0, 35952, 52, 512, 0, 40756, 220, 512, 0, 3796, 8177, 1, 
0, 4096, 8476, 1, 0, 416, 8476, 1, 0, 2360, 221, 512, 0, 12, 0, 0, 0}}
rv = value optimized out
container = {nsCOMPtr_base = {mRawPtr = 0x1213692f0}, No data 
fields}
#4  0x02dd0950 in nsHTMLInputElement::AddedToRadioGroup 
(this=0x1211c0fd0, aNotify=580878554) at nsHTMLInputElement.cpp:2833
checked = value optimized out
checkedChanged = 0
visitor = {nsCOMPtr_base = {mRawPtr = 0x12138dd10}, No data fields}
rv = 0
container = {nsCOMPtr_base = {mRawPtr = 0x2d2885c}, No data 
fields}
#5  0x02db9bd4 in nsHTMLFormElement::AddElement (this=0x1213692a0, 
aChild=0x1211c1000, aNotify=0) at nsHTMLFormElement.cpp:1363
radio = {nsCOMPtr_base = {mRawPtr = 0x1211c1060}, No data fields}
childInElements = 1
controlList = value optimized out
count = value optimized out
element = {nsCOMPtr_base = {mRawPtr = 0x1211c0390}, No data fields}
lastElement = 1
position = value optimized out
type = 12
#6  0x02d9ac64 in nsGenericHTMLFormElement::BindToTree 
(this=0x1211c0fd0, aDocument=value optimized out, aParent=value optimized 
out, aBindingParent=value optimized out, aCompileEventHandlers=value 
optimized out) at nsGenericHTMLElement.cpp:2680
nameVal = 

Bug#557023: Barby::Code128: private method split called for nil

[Wayne Conrad]

Package: libbarby-ruby1.8
Version: 0.3-1
Severity: normal
Tags: patch


Creating a new instance of Barby::Code128 with a legitimate string can
cause a stack trace.  One such string is the empty string:

  Barby::Code128.new(, 'B')

The stack trace is:

/usr/lib/ruby/1.8/barby/barcode/code_128.rb:239:in `characters': private method 
`split' called for nil:NilClass (NoMethodError)
from /usr/lib/ruby/1.8/barby/barcode/code_128.rb:364:in `valid?'
from /usr/lib/ruby/1.8/barby/barcode/code_128.rb:162:in `initialize'
from ./foo.rb:15:in `new'
from ./foo.rb:15

foo.rb (attached) reproduces the problem two different ways.

  Wayne Conrad

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.30-2-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages libbarby-ruby1.8 depends on:
ii  librqrcode-ruby1.8   0.3.2-2 Ruby library for encoding QRCode (
ii  rails2.2.3-1 MVC ruby based framework geared fo
ii  ruby1.8  1.8.7.174-2 Interpreter of object-oriented scr

libbarby-ruby1.8 recommends no packages.

Versions of packages libbarby-ruby1.8 suggests:
ii  libcairo-ruby1.8  1.8.0-1Cairo bindings for the Ruby langua
pn  libprawn-ruby1.8  none (no description available)
ii  librmagick-ruby1.82.11.1-1   ImageMagick API for Ruby 1.8

-- no debconf information


foo.rb
Description: application/ruby
diff -ur libbarby-ruby-0.3.orig/lib/barby/barcode/code_128.rb libbarby-ruby-0.3/lib/barby/barcode/code_128.rb
--- libbarby-ruby-0.3.orig/lib/barby/barcode/code_128.rb	2009-11-18 17:51:28.0 -0700
+++ libbarby-ruby-0.3/lib/barby/barcode/code_128.rb	2009-11-18 17:51:37.0 -0700
@@ -227,8 +227,8 @@
 #sets, in which case the extra will itself have an extra.
 def extra=(extra)
   raise ArgumentError, Extra must begin with \\301, \\302 or \\303 unless extra =~ /^[#{CODEA+CODEB+CODEC}]/n
-  type = extra[/([#{CODEA+CODEB+CODEC}])/n, 1]
-  data = extra[/[#{CODEA+CODEB+CODEC}](.*)/n, 1]
+  type = extra[0..0]
+  data = extra[1..-1]
   @extra = class_for(type).new(data)
 end
 

Bug#557023: (Barby::Code128: private method split called for nil)

[Wayne Conrad]

My apologies.  The patch I submitted with the original report is
incomplete.  It fixes the case in foo.rb with the non-empty string,
but does not fix the empty string case.

Attached is the complete patch.
diff -ur libbarby-ruby-0.3.orig/lib/barby/barcode/code_128.rb libbarby-ruby-0.3/lib/barby/barcode/code_128.rb
--- libbarby-ruby-0.3.orig/lib/barby/barcode/code_128.rb	2009-11-18 17:51:28.0 -0700
+++ libbarby-ruby-0.3/lib/barby/barcode/code_128.rb	2009-11-18 22:35:54.0 -0700
@@ -208,7 +208,7 @@
 #character set, an extra will be created.
 def data=(data)
   data, *extra = data.split(/([#{CODEA+CODEB+CODEC}])/n)
-  @data = data
+  @data = data || ''
   self.extra = extra.join unless extra.empty?
 end
 

Bug#546292: wordpress: cannot upload pictures

[Wayne Conrad]

I installed wordpress yesterday, and managed to duplicate this anomaly
in testing (squeeze), wordpress 2.8.4-2.  The install left my
/srv/www/wp-uploads permissions set according to Giuseppe's
instructions.

Here's a workaround that worked for me.  I'm too new to wordpress to
know if the workaround has harmful side-effects, but it did let me
upload pictures.

There is a configuration page, misc, not shown in the list of
configuration pages.  Bring it up by modifing the URL from one of the
other configuration pages.  For example:

http://yourblogdomain.tld/blog/wp-admin/options-misc.php

Change store uploads in this folder from

/sev/www/wp-uploads/yourblogdomain.tld

to

wp-content/uploads

Change Full URL path to files from

http://yourblogdomain.tld/wp-uploads

to nothing (make it blank).

Best Regards,
Wayne Conrad



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#498083: rsync: segfaults reproducible

[Wayne Davison]

Please try out the patch I posted to the rsync mailing list.  Here's a
couple different ways to look at it (the first has an easy link for
downloading the patch, the second is easier for viewing the patch):

http://lists.samba.org/archive/rsync/2008-September/021778.html

http://www.mail-archive.com/[EMAIL PROTECTED]/msg22528.html

..wayne..



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#262770: Administrative Assistant - Virtual Office

[alfy wayne]

We have reviewed your resume and would like to introduce you to our 
current vacancy.
Luksus, with headquarters in Helsinki, Finland, serves the luxury 
lifestyle and offers unparalleled access to the finest luxury 
goods. We offer a unique mix of brands, partnerships, and product 
expertise. We are currently hiring, work at home positions, to 
provide administrative assistance with sales in North America.
Candidates for the job should possess excellent organizational 
skills as well as the ability to efficiently multi-task. Ideal 
candidates have a strong focus on day-to-day operational 
excellence. The candidate should be motivated, proactive, be able 
to learn and adapt quickly.

Other duties include, but are not limited to:

* Incorporating effective priorities for the virtual office function
* Administer day-to-day financial responsibilities for clients
* Reporting online daily
* Preparing brief summary reports, and weekly financial reports

Salary part-time (3 hours per day, Monday-Friday): $1,200/month, 
plus commission.

If you are interested in this position please send us an email to 
[EMAIL PROTECTED] expressing your interest and we will 
forward you the detailed job description and the working agreement.

Thank You,
Luksus Team




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#342132: Finest

[gauthier wayne]

 view  medication fast delivery  see us

Bug#482777: phpwiki: SQL error during sqlite install

[Wayne Conrad]

Package: phpwiki
Version: 1.3.14-2
Severity: normal


When installing and selecting sqlite, installation gets an SQL error:

populating database via sql...  CREATE TABLE pref (
userid  CHAR(48) NOT NULL PRIMARY KEY,
prefs   MEDIUMTEXT NULL DEFAULT '',
passwd  CHAR(48) DEFAULT '',
groupname CHAR(48) DEFAULT 'users',
);
SQL error: near ): syntax error

Complete installation log attached.

-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.21-2-486
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages phpwiki depends on:
ii  apache2   2.2.8-4~lenny1 Next generation, scalable, extenda
ii  apache2-mpm-prefork [http 2.2.8-4~lenny1 Traditional model for Apache HTTPD
ii  dbconfig-common   1.8.38 common framework for packaging dat
ii  debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii  libapache2-mod-php5   5.2.5-3server-side, HTML-embedded scripti
ii  php-db1.7.13-2   PHP PEAR Database Abstraction Laye
ii  php5-mysql5.2.5-3MySQL module for php5
ii  php5-sqlite   5.2.5-3SQLite module for php5
ii  ucf   3.006  Update Configuration File: preserv

Versions of packages phpwiki recommends:
ii  mysql-client  5.0.51a-6  MySQL database client (meta packag
ii  mysql-client-5.0 [mysql-clien 5.0.51a-6  MySQL database client binaries
ii  postgresql-client-8.3 [postgr 8.3.1-2+b1 front-end programs for PostgreSQL 
ii  sqlite2.8.17-4   command line interface for SQLite

-- debconf information:
* phpwiki/system/documentroot:
  phpwiki/pgsql/authmethod-user:
  phpwiki/upgrade-error: abort
  phpwiki/pgsql/manualconf:
  phpwiki/mysql/method: unix socket
  phpwiki/upgrade-backup: true
  phpwiki/dbconfig-upgrade: true
  phpwiki/dbconfig-remove:
  phpwiki/remote/newhost:
  phpwiki/remote/port:
  phpwiki/db/basepath: /var/lib/dbconfig-common/sqlite/phpwiki
  phpwiki/remote/host:
  phpwiki/purge: false
  phpwiki/system/localnet: 10.0.0.0/24
  phpwiki/pgsql/admin-user: postgres
  phpwiki/internal/skip-preseed: false
  phpwiki/install-error: abort
  phpwiki/db/app-user:
  phpwiki/system/accessible: localhost only
  phpwiki/passwords-do-not-match:
  phpwiki/mysql/admin-user: root
  phpwiki/dbconfig-reinstall: false
  phpwiki/pgsql/method: unix socket
* phpwiki/database-type: sqlite
  phpwiki/pgsql/changeconf: false
  phpwiki/db/dbname: phpwiki
  phpwiki/notes/configupgrade:
  phpwiki/pgsql/no-empty-passwords:
  phpwiki/missing-db-package-error: abort
  phpwiki/remove-error: abort
  phpwiki/notes/introduction:
  phpwiki/internal/reconfiguring: false
* phpwiki/dbconfig-install: true
  phpwiki/pgsql/authmethod-admin: ident
[EMAIL PROTECTED]:/$ sudo apt-get install phpwiki
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
  gnome-keyring libsmbiosxml1 aspell-en libts-0.0-0 libglib-perl 
shared-mime-info libqt4-opengl xsltproc libenchant1c2a notification-daemon 
libgnomevfs2-0
  libgail18 libqt4-assistant libneon27 libgnome2-0 libgtop2-common aspell 
libdjvulibre15 djvulibre-plugin libgnomeui-common libgail-common
  libgnome-keyring0 libart-2.0-2 app-install-data libavahi-common-data 
libdbus-1-3 libqt4-test libdbus-glib-1-2 libqt4-sql-mysql libqt4-dbus
  libopenexr2ldbl scrollkeeper docbook-xml libpam-gnome-keyring 
libqt4-qt3support libx86-1 libbonoboui2-common gconf2 libbonoboui2-0 
libwnck-common
  libgnome2-perl libqt4-core libnspr4-0d esound-common libnotify1 libsmbios1 
libdirectfb-extra libcwidget1 libgnome-menu2 libsmbclient libfam0
  libsmbios-bin libeel2-data libdirectfb-1.0-0 libwnck22 libsexy2 vbetool 
libgconf2-4 iceape-gnome-support iceape-browser libxres1 dbus djview4
  libhunspell-1.1-0 libgnome2-common powermgmt-base libstartup-notification0 
fam libhunspell-1.2-0 libqt4-gui libhal1 hal libqtcore4 libgnome2-vfs-perl
  libesd0 libgnomecanvas2-0 deborphan dictionaries-common libvte9 libgnomeui-0 
libgtk2-perl libhal-storage1 libidl0 libbonobo2-0 libglade2-0 pm-utils
  libqt4-sql libqt4-svg libeel2-2.20 xdg-utils libaudiofile0 
libgnomecanvas2-common libqt4-xml libgnomevfs2-extra gconf2-common uswsusp 
libqt4-network
  libgtop2-7 libqt4-designer synaptic gksu gnome-mime-data libavahi-client3 
libqtgui4 liborbit2 libbonobo2-common libgksu2-0 sgml-data libsysfs2 radeontool
  libavahi-glib1 hal-info libcairo-perl mozilla-browser esound-clients 
libqt4-script dbus-x11 libsplashy1 libnautilus-extension1 libaudio2 gnome-mount
  libavahi-common3 portmap libvte-common libscrollkeeper0 libnss3-1d 
libaspell15 libmng1 libgnome2-canvas-perl qt4-qtconfig libgnomevfs2-common
Use 'apt-get autoremove' to remove them.
Suggested 

Bug#482780: phpwiki: Error during install using postgres: pg_ts_cfg does not exist

[Wayne Conrad]

Package: phpwiki
Version: 1.3.14-2
Severity: normal


When installing using postgres, I got a 'pg_ts_cfg does not exist' error:

An error seems to have occurred while installing the database. If it's of any 
help, this was the error encountered:

At first init the database with: $ createdb phpwiki $ createuser -S -R -d 
'wikiuser' $ psql -U 'wikiuser' phpwiki 
/usr/share/postgresql/contrib/tsearch2.sql $ psql -U 'wikiuser' phpwiki  
psql-initialize.sql Initializing PhpWiki tables with: prefix = '' httpd_user =
... 
ERROR: relation pg_ts_cfg does not exist

Complete installation log attached

-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.21-2-486
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages phpwiki depends on:
ii  apache2   2.2.8-4~lenny1 Next generation, scalable, extenda
ii  apache2-mpm-prefork [http 2.2.8-4~lenny1 Traditional model for Apache HTTPD
ii  dbconfig-common   1.8.38 common framework for packaging dat
ii  debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii  libapache2-mod-php5   5.2.5-3server-side, HTML-embedded scripti
ii  php-db1.7.13-2   PHP PEAR Database Abstraction Laye
ii  php5-mysql5.2.5-3MySQL module for php5
ii  php5-sqlite   5.2.5-3SQLite module for php5
ii  ucf   3.006  Update Configuration File: preserv

Versions of packages phpwiki recommends:
ii  mysql-client  5.0.51a-6  MySQL database client (meta packag
ii  mysql-client-5.0 [mysql-clien 5.0.51a-6  MySQL database client binaries
ii  postgresql-client-8.3 [postgr 8.3.1-2+b1 front-end programs for PostgreSQL 
ii  sqlite2.8.17-4   command line interface for SQLite

-- debconf information:
* phpwiki/system/documentroot:
  phpwiki/pgsql/authmethod-user: ident
  phpwiki/upgrade-error: abort
  phpwiki/pgsql/manualconf:
  phpwiki/mysql/method: unix socket
  phpwiki/upgrade-backup: true
  phpwiki/dbconfig-upgrade: true
  phpwiki/dbconfig-remove:
  phpwiki/remote/newhost:
  phpwiki/remote/port:
  phpwiki/db/basepath:
  phpwiki/remote/host:
  phpwiki/purge: false
  phpwiki/system/localnet: 10.0.0.0/24
  phpwiki/pgsql/admin-user: postgres
  phpwiki/internal/skip-preseed: false
* phpwiki/install-error: ignore
  phpwiki/db/app-user: phpwiki
  phpwiki/system/accessible: localhost only
  phpwiki/passwords-do-not-match:
  phpwiki/mysql/admin-user: root
  phpwiki/dbconfig-reinstall: false
  phpwiki/pgsql/method: unix socket
* phpwiki/database-type: pgsql
  phpwiki/pgsql/changeconf: false
  phpwiki/db/dbname: phpwiki
  phpwiki/notes/configupgrade:
  phpwiki/pgsql/no-empty-passwords:
  phpwiki/missing-db-package-error: abort
  phpwiki/remove-error: abort
  phpwiki/notes/introduction:
  phpwiki/internal/reconfiguring: false
* phpwiki/dbconfig-install: true
  phpwiki/pgsql/authmethod-admin: ident
[EMAIL PROTECTED]:/etc$ sudo apt-get install phpwiki
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
  php5-imap php5-ldap
The following NEW packages will be installed
  phpwiki
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/3206kB of archives.
After this operation, 14.9MB of additional disk space will be used.
Preconfiguring packages ...
Configuring phpwiki
---

phpwiki must have a database installed and configured before it can be used.  
If you like, this can be handled with dbconfig-common.

If you are an advanced database administrator and know that you want to perform 
this configuration manually, or if your database has already been installed
and configured, you should refuse this option.  Details on what needs to be 
done should most likely be provided in /usr/share/doc/phpwiki.

Otherwise, you should probably choose this option.

Configure database for phpwiki with dbconfig-common? yes


phpwiki can be configured to use one of many database types. Below, you will be 
presented with the available choices.

  1. mysql  2. pgsql  3. sqlite

Database type to be used by phpwiki: 2


Please provide a password for phpwiki to register with the database server.  If 
left blank, a random password will be generated for you. . If you are using
ident based authentication, the supplied password will not be used and can be 
left blank.  Otherwise, PostgreSQL access may need to be reconfigured to
allow password-authenticated access.

PostgreSQL application password for phpwiki:


Where should the web-accessible location of the PHPWiki be?

This is the directory of your website that people should use to access the 
PHPWiki.  By default, this is http://yourserver/phpwiki, but you can change it 
to
be anything within your server.  Enter just the directory portion below.

Web-accessible 

Bug#181491: very CheapPrice Bacheelor, MasteerMBA, and Doctoraate dip1omas jyjdxt r0se3b

[Wayne Gonzalez]

  
We can assist with Diplomas from prestigious universities based on your present 
knowledge and LifeExperience  
  
No required examination, tests, classes, books, or interviews
  
Bacheelor, MasteerMBA, and Doctoraate diplomas available in the field of your 
choice -
that's right, you can become a Doctor and receive all the benefits that comes 
with it! 

No one is turned down  
Confidentiality assured 
CALL US 24 HOURS A DAY, 7 DAYS A WEEK   
   
For US: 1-309-407-3749   
Outside US: +1-309-407-3749 
  
Just leave your NAME  PHONE NO. (with CountryCode) in the voicemail 
  
Please call today!! 
   
   
  
   




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#307118: what she really wants

[Wayne Pegu]

Why deprive your lady of the best? Gain a few inches and give her all she wants

http://www.Reventeoni.com/
Blow your load in Linday



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#369305: zsh: failed to write history file /home/sven/.zsh-history: no such file or directory

[Wayne Davison]

On Thu, Mar 06, 2008 at 10:19:37AM +, Peter Stephenson wrote:
 If we decide a warning message is still appropriate, given that we've
 detected exactly what's going on it should probably be more specific
 than just a vague failed to write history.

Yes, we should definitely be giving the user better information.

I've fixed several things:

1. Tell the user when we're refusing to write out the history file so
that the ownership won't change.  Try to differentiate if we're just
skipping the rewrite or if no new history data was written.

2. Allow root to write out the file even if it doesn't own it, as long
as zsh knows how to chown a file handle.

3. Avoid the generic failure message that confuses the issue (by setting
err = 0).

4. (bonus) Output the right error if we can't open the file for writing,
not an error about the file-handle being invalid.  (This was due to the
use of fdopen(open(...), ...), which loses the errno from open().)

..wayne..
--- Src/hist.c  31 Dec 2007 23:14:17 -  1.70
+++ Src/hist.c  6 Mar 2008 16:43:05 -
@@ -2192,13 +2192,13 @@ savehistfile(char *fn, int err, int writ
 }
 errno = 0;
 if (writeflags  HFILE_APPEND) {
+   int fd = open(unmeta(fn), O_CREAT | O_WRONLY | O_APPEND | O_NOCTTY, 
0600);
tmpfile = NULL;
-   out = fdopen(open(unmeta(fn),
-   O_CREAT | O_WRONLY | O_APPEND | O_NOCTTY, 0600), a);
+   out = fd = 0 ? fdopen(fd, a) : NULL;
 } else if (!isset(HISTSAVEBYCOPY)) {
+   int fd = open(unmeta(fn), O_CREAT | O_WRONLY | O_TRUNC | O_NOCTTY, 
0600);
tmpfile = NULL;
-   out = fdopen(open(unmeta(fn),
-O_CREAT | O_WRONLY | O_TRUNC | O_NOCTTY, 0600), w);
+   out = fd = 0 ? fdopen(fd, w) : NULL;
 } else {
tmpfile = bicat(unmeta(fn), .new);
if (unlink(tmpfile)  0  errno != ENOENT)
@@ -2206,13 +2206,27 @@ savehistfile(char *fn, int err, int writ
else {
struct stat sb;
int old_exists = stat(unmeta(fn), sb) == 0;
+   uid_t euid = geteuid();
 
-   if (old_exists  sb.st_uid != geteuid()) {
+   if (old_exists
+#if defined HAVE_FCHMOD  defined HAVE_FCHOWN
+ euid
+#endif
+ sb.st_uid != euid) {
free(tmpfile);
-   tmpfile = NULL; /* Avoid an error about HISTFILE.new */
+   if (err) {
+   if (isset(APPENDHISTORY) || isset(INCAPPENDHISTORY)
+|| isset(SHAREHISTORY))
+   zerr(writing %s would change its ownership -- skipped 
size trimming, fn);
+   else
+   zerr(writing %s would change its ownership -- history 
not saved, fn);
+   err = 0; /* Don't report a generic error below. */
+   }
out = NULL;
-   } else
-   out = fdopen(open(tmpfile, O_CREAT | O_WRONLY | O_EXCL, 0600), 
w);
+   } else {
+   int fd = open(tmpfile, O_CREAT | O_WRONLY | O_EXCL, 0600);
+   out = fd = 0 ? fdopen(fd, w) : NULL;
+   }
 
 #ifdef HAVE_FCHMOD
if (old_exists  out) {

Bug#369305: zsh: failed to write history file /home/sven/.zsh-history: no such file or directory

[Wayne Davison]

On Wed, Mar 05, 2008 at 03:29:36PM -0500, Clint Adams wrote:
 As Sven notes, any history added before exiting will make it into the
 history file despite the error message.

The history being added is the appending going on due to SHARE_HISTORY.
The error is referring to the inability to rewrite the history file on
exit, and it is actually failing (because the write-new, then rename
steps would cause the file to change ownership).  If incremental history
updating was not happening, the failed rewrite would indeed not save
anything new.  The no such file or directory error string is
presumably a left-over errno that Peter noticed.

Aside:  I like to make sure to never mix user history and root history,
so I define a different HISTFILE for root (e.g. .zhist_$USER).

..wayne..



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#445011: xfsprogs: fsck.xfs doesn't verify that the device exists

[Wayne Tucker]

Package: xfsprogs
Version: 2.8.11-1
Severity: normal
Tags: patch

fsck.xfs doesn't check to see if the device it is asked to check
exists.  This can result in a system booting with an incomplete set of
filesystem mounts.  The included patch works for me, although I only
have a limited number of systems on which to test it.

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-xen-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages xfsprogs depends on:
ii  libc62.3.6.ds1-13etch2   GNU C Library: Shared libraries
ii  libreadl 5.2-2   GNU readline and history libraries
ii  libuuid1 1.39+1.40-WIP-2006.11.14+dfsg-2 universally unique id library

xfsprogs recommends no packages.

-- no debconf information
12a13,17
 eval DEV=\${$#}
 if [ ! -b $DEV ]; then
echo $0: $DEV does not exist or is not a block device
exit 8
 fi

Bug#175064: Suchen Sie Mini Job? Dann sind Sie auf dem richtigen Weg

[Wayne Keys]

Zerix Intern.Transver
Manager: Maksim Kovalski
109153 Moskau
leningradskiy 337/2
Tel +7 984-641-1756


Arbeiten Sie endlich für sich selbst! 
Sie wollen sich beruflich verändern ?

Sie kommen in ihrem job nicht wie gewünscht voran und wollen eine
neuen karriere-kurs einschlagen? Dann sollten wir uns kennen lernen!!! 
Nehmen Sie Ihre Zukunft selbst in die Hand!

Wir sind ein europaweit tätiges Spezialkreditinstitut. Zu unserem
Kunden gehören konzerneigene und fremde Handelsunternehmen. Zu unserem
aufgaben gehört neben dem klassischem Kredit ,Leasing und
Unternehmäskauf/Verkauf (Nachfolgeregelungen) ,Transfer per Western Union ,Money
Grimm .In diesem Augenblick arbeiten für uns bereits mehr als 100
unabhängige Agenten auf der ganzen Welt.
Für unsere Kunde haben wir spezifische Bankdienstleistungen
entwickelt. Wir bieten  Ihnen eine interessantes Aufgabengebiet mit guten
persönlichen Entwicklungschancen.
Zu Verstärkung unsere Team  brauchen wir  einen Projekt-Koordinator. 
Zur Zeit wächst unsere Firma und wir haben eine beschränkte Zahl von
vakanten Stellen. 
Sie haben Interesse an Weiterbildung, können gut organisieren, sind

verantwortungsbewusst  und überzeugungsstark? Und sie suchen eine Voll
oder  Teilzeitbeschäftigung? Dann bewerben sie sich! Auch
Widereinsteiger /innen sind uns willkommen.
Insbesondere eine VOB-konforme Arbeitsweise machen Sie zum idealen
Kandidaten. 
Wir möchten betonen, dass keinerlei Investitionen Ihrerseits
erforderlich sind, um mit uns zusammenzuarbeiten. 
Ihre aufgaben liegen in der umfassenden ganzheitlichen und

bedarfsorientierten Beratung, sowie der aktiven Neu- und 
Bestandkundenakquisition
unserer Privatkunden.

Haben Sie Interesse an dieser Arbeit, teilen Sie uns bitte mit und wir
werden uns danach mit Ihnen zum Interview in Verbindung setzen.

Senden Sie uns ihre Antwort an: [EMAIL PROTECTED]

und Sie erhalten weitere Informationen

Sollten sie noch eventuelle Fragen haben,
wird Ihnen selbstverständlich einer unserer 
deutschen Mitarbeiter Zur Verfügung stehen


Mit freundlichem Grüße  


Manager: Maksim Kovalski




--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#445011: xfsprogs: fsck.xfs doesn't verify that the device exists

[Wayne Tucker]

Nathan Scott wrote:

Hi Wayne,


Hello Nathan,


On Tue, 2007-10-02 at 10:38 -0700, Wayne Tucker wrote:


fsck.xfs doesn't check to see if the device it is asked to check
exists.  This can result in a system booting with an incomplete set of
filesystem mounts.  The included patch works for me, although I only
have a limited number of systems on which to test it. 


Hmm, OK - seems safe enough I guess.  It'd be nice to understand
the root cause here a bit - is the problem that we dont attempt to
access /dev/foo at all, so udev doesn't see any requests for that
device and doesnt create the device node?  Then later when we try
to mount, the mount userspace code gets ENODEV?  If so, I wonder
why the mount doesn't populate the device nodes on its access?


My knowledge of udev is pretty limited, so I'm not sure if that would 
come into play at all.


The situation I ran into is when the device that is supposed to contain 
the xfs filesystem is missing.  fsck.xfs doesn't tell checkfs.sh that 
there's a problem, and mountall.sh gladly assumes that checkfs.sh did 
all of the legwork.


This bug might be more appropriately applied to the initscripts package, 
but I decided to file it here since:


1.) this was an easier fix
2.) in the same scenario, fsck.(ext(2|3)|minix|cramfs|jfs) return errors
3.) this was a much easier fix. :)

In my case, the missing devices are being caused by intermittent XENBUS 
timeouts.  The the VM boots but doesn't realize that /var/log isn't 
mounted.  There's an underlying issue that needs to be resolved there, 
but the same problem could happen on normal machines in the event that a 
physical device is dead.




Also, the NFS fsck program is also a shell script, I wonder if it
might suffer similar issues and need a similar patch?  Possibly not
since theres no local device involved there.


It looks like fsck.nfs may just be a kludge for people that specify a 
pass other than 0 on nfs mounts.  mountnfs.sh is smarter than 
mountlocal.sh and doesn't seem to be dependent on fsck for anything.




I'll send the patch upstream and solicit their thoughts as well.


Thanks for your time and consideration.

- Wayne




--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#209945: great notice

[Roscoe Wayne]

The earth has gone wireless and Mobile Airwaves (mbwc) is 
in the right place in the right time with a Red Hot Product!


We are anticipate Financial Results to be announced by the 
Mobile Airwaves any day.  With all the New Contracts they have 
acquired we are expecting Record Earnings!


mbwc  is currently under priced at around 3 cents.  
With the Mobile Airwaves being so Tightly held we awaiting the inlux
of buying to Push the price off the charts!  


Get in on this Breakout Winner Early!



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#405883: No tun0 in Linux but have en2 in osx

[Wayne Anderson]

Package: MOL
Version: 0.9.70-20ubuntu2


Hi, I'm not sure that this is a bug, but I have setup MOL (0.9.70-20ubuntu2) 
in Kubuntu 6.06ppc and I am running tiger 10.4.8 without problems except there 
is no tun0 in the interfaces.

tun is not loaded when MOL starts but I can modprobe it and it appears but 
still no tun0 in ifconfig. I do have an 'en2' on the mac osx side but I can't 
get an internet connection without tun0.

thanks

wanger


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#399783: /dev/megadev0 not created by megaraid_mm driver under udev

[Wayne Tucker]

dann frazier wrote:
 On Tue, Nov 21, 2006 at 03:35:38PM -0800, Wayne Tucker wrote:
 Package: linux-image-2.6.17-2-amd64
 Version: 2.6.17-9

 The /dev/megadev0 device used by the LSI MegaRAID management tools does
 not exist under kernels using udev.

 A patch is available at http://lkml.org/lkml/2006/5/1/222 to make the
 megaraid_mm driver register the device.

 I've tested the patch with a custom build from linux-source-2.6.17 version
 2.6.17-9 and megarc version 1.11.

 Please try reproducing against the 2.6.18 kernel in sid; etch will
 ship with 2.6.18, 2.6.17 packages are no longer maintained.
 

Just confirmed that the file is still missing when booting:

Package: linux-image-2.6.18-3-amd64
Version: 2.6.18-7

Thanks,

- Wayne

P.S. For anyone who came across this post and needs an immediate
workaround, mknod /dev/megadev0 c 254 0 may do the trick.. if it doesn't
work, search for megadev in /proc/devices and replace 254 with the
number shown there



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#145280: fw: Inspection patricia hatch

[Elmo Wayne]

Good Afternoon patricia hatch,

After Checking our files, I am willing to offer you 
anywhere from 394K at 8.94% to 636K at 5.45% FIXED.

www.praakm.com/9r

Fill in your app and get a copy of your FICO rating.

Kind Regards,
Elmo Wayne




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#126624: Experian Client description available penny gerwer

[Willard Wayne]

Hey penny,

Our office is willing to negotiate.

www.basiter.com/16r

Get in touch with my company for a 2.72% reduction.

Best Regards,
Willard Wayne




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#73041: FWD: Incorrect Details susalla peter

[Clarence Wayne]

Attention susalla peter,

After a complete examination of your aoolication, my company has found
34 associations willing to help you.  You've been approved
at 138K at 6.98% to 544K at 5.95%

www.vigilla.com/16r

We will help everyone, regardless of their ratings have been.

Thanks Alot,
Clarence Wayne




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#106028: betsy messina Congrats for Joining us

[Moises Wayne]

betsy messina,

After a thorough review of your information, our comapny has found
17 corporations willing to help.  You've been approved
at 279K at 6.97% to 507K at 4.24%

www.orenora.com/16r

Our office can help anyone, no matter what your scores have been.

Thanks Alot,
Moises Wayne




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#41030: Fwd: Your TransUnion Report nick jordan

[Nicolas Wayne]

How are you nick jordan,

After a thorough examination of your information, my company has found
16 businesses willing to help you.  You've been O.K.ayed
from 140K at 6.00% to 653K at 5.40%

www.chestst.com/16r

I can help anyone, regardless of their ratings are.

Thank you,
Nicolas Wayne




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#102921: details cheryl desmarais

[Ray Wayne]

cheryl desmarais,

Do you need immediate funds to use any way you feel like?

I have validated the following offers:

288K - 8.12% 
474K - 5.78%
550K - 4.97%

www.buckrea.com/16r

22 year lows, check us out now to view what we can do for you.

Best Respects,
Ray Wayne




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#152152: Break-in roger philhower

[Willard Wayne]

roger philhower,

Do you want prompt resources to utilize any way you wish?

We have authenticated the following proposals:

147K - 7.35% 
471K - 5.46%
678K - 4.75%

www.buckrea.com/16r

34 year lows, check us out now to view what we can do for you.

Sincerely,
Willard Wayne




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#41030: mike monroe Negative TransUnion Score

[Isiah Wayne]

Good day mike monroe,

Accoring to your previous applications, I can 
offer you anywhere from 233K at 7.59% to 677K at 4.32%

www.contrum.com/16r

Fill out your info and automatically recieve your FICO score.
Bad ratings aren't a issue. 

Respects,
Isiah Wayne




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#134571: patricia magee Office closed; No work tomorrow

[Cesar Wayne]

patricia magee,

Learn how to generate 1.5 - 3.5k a day from your house.

888.701.3877

Contact me at my number if you can return phone calls.

Thanks,
Cesar Wayne




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#41030: fw: nick jordan did you hear our boss got fired?

[Dallas Wayne]

nick jordan,

Learn how to generate 1.5 - 3.5k daily from your home.

800.513.3876

Contact me at my number if you can return phone calls.

Sincerely,
Dallas Wayne




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#70572: Office closed; No work tomorrow

[Alfonzo Wayne]

 ,

Find out how to make 1.5 - 3.5k a day from your home.

800.391.9084

Contact me at my number if you can return phone calls.

Thanks Alot,
Alfonzo Wayne




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#381941: Emits no file type for file starting with '('

[Wayne Conrad]

Package: file
Version: 4.17-2
Severity: normal


File emits no file type for a text file that starts with '('.

To reproduce:

$ echo '(' bar
$ file bar
bar: 

Additional info:

$ file -v
file-4.17
magic file from /etc/magic:/usr/share/file/magic
$ ls /etc/magic
ls: /etc/magic: No such file or directory

-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages file depends on:
ii  libc6 2.3.6-15   GNU C Library: Shared libraries
ii  libmagic1 4.17-2 File type determination library us
ii  zlib1g1:1.2.3-13 compression library - runtime

file recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#380021: du in stable skips some files in argument list

[Wayne Schroeder]

-r--r--   1 raz  raz  160 May 27  2005 .gtkrc-2.0
-rw-r--r--   1 raz  raz  242 May 27  2005 .gtkrc-2.0.bak
-rw-rw-r--   1 raz  raz  160 Dec  7  2004 .gtkrc-2.0.mine
-rw-rw-r--   1 raz  raz  154 Jun  3  2005 .gtkrc.bak
-rw-rw-r--   1 raz  raz  164 Sep 29  2004 .gtkrc.tmp-13
drwxr-xr-x   2 raz  raz 4096 Dec  9  2004 .icons/
drwx--   2 raz  raz 4096 Sep 13  2004 .irssi/
drwxr-xr-x   3 raz  raz 4096 Jan  1  2005 .java/
drwx--   4 raz  raz 4096 Dec 29  2004 .kde/
-rw---   1 raz  raz  490 Jun 29 00:53 .kderc
drwxr-xr-x   3 raz  raz 4096 Dec 23  2004 .kpackage/
drwxr-xr-x   2 raz  raz 4096 Jul 31  2004 .lftp/
drwx--   3 raz  raz 4096 May  9  2004 .local/
-rw-r--r--   1 raz  raz  205 Jul 30  2004 .lpoptions
drwx--   3 raz  raz 4096 Jun 13  2004 .macromedia/
drwxr-xr-x   3 raz  raz 4096 May  9  2004 .mcop/
-rw---   1 raz  raz   31 Jul 26 16:18 .mcoprc
-rw-rw-r--   1 raz  raz  166 Oct 25  2004 .minirc.dfl
drwx--   6 raz  raz 4096 May  9  2005 .mozilla/
drwxrwxr-x   3 raz  raz 4096 May 12  2005 .mozilla-thunderbird/
drwxrwxr-x   3 raz  raz 4096 Jan  9  2005 .mplayer/
drwxr-xr-x   3 raz  raz 4096 Sep 13  2004 .openoffice/
drwx--   4 raz  raz 4096 Jan  8  2005 .pan/
-rw-rw-r--   1 raz  raz  166 Jun  1  2005 .passwd.txt.gpg
-rw---   1 raz  raz13169 May 16 18:02 .psql_history
drwxrwxr-x   4 raz  raz 4096 Jun  5 18:02 .q3a/
drwxr-xr-x   2 raz  raz 4096 Jul 26 16:18 .qt/
-rw-r--r--   1 raz  raz 9443 Jun  8 15:37 .recently-used
-rw-rw-r--   1 raz  raz  643 Oct  1  2004 .reportbugrc
drwxr-xr-x   2 raz  raz 4096 Apr 13  2005 .sbd/
-rwx--   1 raz  raz27724 Jun  5 13:39 .setup11802*
drwxr-xr-x   5 raz  raz 4096 May 12  2005 .silc/
drwx--   4 raz  raz 4096 May 12  2005 .silky/
drwxrwxr-x   2 raz  raz 4096 Jan  1  2005 .snes96_snapshots/
drwx--   2 raz  raz 4096 Apr  6 17:35 .ssh/
-rw-rw-r--   1 raz  raz  131 Jul  3 10:00 .ssh-agent.sh
-rwxr-xr-x   1 raz  raz   68 Apr 14  2005 .sversionrc*
-rw---   1 raz  raz12288 Oct 28  2005 .swn
-rw---   1 raz  raz12288 Aug  2  2005 .swo
-rw---   1 raz  raz12288 May 24  2004 .swp
drwx--   5 raz  raz 4096 Mar 23 15:42 .thumbnails/
-rw---   1 raz  raz 9495 Jul 26 15:59 .viminfo
-rw---   1 raz  raz 8897 Jan 20  2005 .viminfo.tmp
-rw-r--r--   1 raz  raz0 May  9  2004 .vimrc
drwxr-xr-x   2 raz  raz 4096 Jul 26 15:28 .vmware/
drwx--   2 raz  raz 4096 Jun 10 05:07 .vnc/
drwx--   2 raz  raz 4096 Jul 10  2004 .xcdroast/
drwxr-xr-x   2 raz  raz 4096 Jul 13  2004 .xine/
drwxr-xr-x   4 raz  raz 4096 May 13  2004 .xmms/
-rw---   1 raz  raz39673 Jul 26 16:25 .xsession-errors


I went ahead and did an strace of du -shc .* and it's obvious that it's
processing .mozilla-thunderbird, it just seems those results are lost
internally.  It's probably nothing special about that directory as you
can run du -shc .m* and it works fine.

--
open(.mozilla-thunderbird,
O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 4
fstat64(4, {st_mode=S_IFDIR|0775, st_size=4096, ...}) = 0
fcntl64(4, F_SETFD, FD_CLOEXEC) = 0
fstat64(4, {st_mode=S_IFDIR|0775, st_size=4096, ...}) = 0
fchdir(4)   = 0
getdents64(4, /* 5 entries */, 4096)= 152
lstat64(appreg, {st_mode=S_IFREG|0664, st_size=335, ...}) = 0
lstat64(profiles.ini, {st_mode=S_IFREG|0664, st_size=104, ...}) = 0
lstat64(guvsq90v.default, {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
getdents64(4, /* 0 entries */, 4096)= 0
close(4)= 0
open(guvsq90v.default, O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 4
fstat64(4, {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
fcntl64(4, F_SETFD, FD_CLOEXEC) = 0
fstat64(4, {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
fchdir(4)   = 0
.
.
.
.
--

Wayne


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#370799: rsync: [manual] option names should be listed alphabetically

[Wayne Davison]

Alphabetical order only helps someone to scan by eye for a known name,
not to find a useful option by what function it performs.  The current
idea is to group options together that perform similar functions, which
(hopefully) helps people to find options by their concept (however, the
list could certainly be improved to make this clustering better).

If someone already knows the name of an option, instead of scanning a
sorted list by eye, I'd suggest searching for it using a pager.

Thus, I don't see the benefit of having the options in alphabetical
order.

..wayne..


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#367700: No such file or directory during init

[Wayne Conrad]

Package: slony1-bin
Version: 1.1.5-1
Severity: important
Tags: patch


/etc/init.d/slony1 fails to start slony:

[EMAIL PROTECTED]:/home/wayne$ /etc/init.d/slony1 start
Starting Slony-I daemon: wayne_production-su: . /lib/lsb/init-functions ; 
start_daemon -p /var/run/slony1/wayne_production.pid /usr/bin/slon -f 
/etc/slony1/wayne_production/slon.conf -p /var/run/slony1/wayne_production.pid 
/var/log/slony1/slon-wayne_production.log 21 /dev/null : No such file or 
directory
 failed!

It appears that the su now requires the -c argument that used to be
implied.  Adding -c to the script fixes everything (see attached
patch).

-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages slony1-bin depends on:
ii  libc6 2.3.6-7GNU C Library: Shared libraries
ii  libpq48.1.3-4PostgreSQL C client library
ii  postgresql-common 50 manager for PostgreSQL database cl

Versions of packages slony1-bin recommends:
ii  ntp-server   1:4.2.0a+stable-2sarge1 Network Time Protocol: common serv
ii  postgresql-8.1-s 1.1.5-1 replication system for PostgreSQL

-- no debconf information
diff -ur slony1-1.1.5.orig/debian/slony1-bin.slony1.init 
slony1-1.1.5/debian/slony1-bin.slony1.init
--- slony1-1.1.5.orig/debian/slony1-bin.slony1.init 2006-05-16 
12:01:41.0 -0700
+++ slony1-1.1.5/debian/slony1-bin.slony1.init  2006-05-17 11:34:08.0 
-0700
@@ -44,7 +44,7 @@
 }
 
 d_start() {
-   su - postgres . /lib/lsb/init-functions ; start_daemon -p $(pidfile 
$1) $DAEMON -f $(conffile $1) -p $(pidfile $1) $(logfile $1) 21 /dev/null 

+   su - postgres -c . /lib/lsb/init-functions ; start_daemon -p $(pidfile 
$1) $DAEMON -f $(conffile $1) -p $(pidfile $1) $(logfile $1) 21 /dev/null 

 }
 
 d_stop() {

Bug#286275: dpkg: [INSTALL-INFO] fixing the --dir-file option

[Wayne Davison]

Package: dpkg
Version: 1.13.17
Followup-For: Bug #286275


The initial problem reported in this bug (that install-info does not
understand the --dir-file option), no longer appears to be true.
Unfortunately, the implementation of the --dir-file option is not
correct:  the script makes it an alias for the --info-dir option when
the former expects a filename and the latter expects a directory with an
assumed dir filename appended.  The failure condition is that anyone
using the --dir-file option properly gets an error referring to a
filename with an extra /dir (e.g. /usr/local/info/dir/dir).

My fix is to change the $infodir variable to hold the name of the file,
not the directory with a bunch of appended /dir strings in the code.

The attached patch makes the following changes:

1. All instances of $infodir/dir were changed to $infodir .
2. Any resulting instances of $infodir (including the quotes) was
   changed to remove the unneeded double-quotes.
3. The initialization of $infodir gets a trailing /dir added.
4. The matching of --infodir and --info-dir was unified to use a
   single regex and to append /dir to the end of the specified dir.
5. Changed a call of -s $infodir to -s _ because we can reuse
   the same stat info as a prior -e check.
6. Fixed the indentation of 4 lines.

-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (900, 'testing'), (800, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-686
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages dpkg depends on:
ii  coreutils [textutils] 5.94-1 The GNU core utilities
ii  libc6 2.3.6-3GNU C Library: Shared libraries an

dpkg recommends no packages.

-- no debconf information
--- /usr/sbin/install-info  2006-03-19 17:38:31.0 -0800
+++ /tmp/install-info   2006-04-11 13:39:54.0 -0700
@@ -29,7 +29,7 @@
 END
 }
 
-$infodir='/usr/share/info';
+$infodir='/usr/share/info/dir';
 $maxwidth=79;
 $Text::Wrap::columns=$maxwidth;
 $backup='/var/backups/infodir.bak';
@@ -80,14 +80,12 @@
 $sectiontitle= shift(@ARGV);
 } elsif (m/^--(c?align|maxwidth)=([0-9]+)$/) {
warn( $name: $1 deprecated(ignored)\n );
-} elsif (m/^--infodir=/) {
-$infodir=$';
+} elsif (m/^--info-?dir=/) {
+$infodir=$' . '/dir';
 } elsif (m/^--info-file=/) {
 $filename=$';
 } elsif (m/^--menuentry=/) {
 $menuentry=$';
-} elsif (m/^--info-dir=/) {
-$infodir=$';
 } elsif (m/^--description=/) {
 $description=$';
 } elsif (m/^--dir-file=/) { # for compatibility with GNU install-info
@@ -250,21 +248,21 @@
 }
 }
 
-if (!$nowrite  ( ! -e $infodir/dir || ! -s $infodir/dir )) {
+if (!$nowrite  ( ! -e $infodir || ! -s _ )) {
 if (-r $backup) {
-   print STDERR $name: no file $infodir/dir, retrieving backup file 
$backup.\n;
-   if (system (cp $backup $infodir/dir)) {
-   print STDERR $name: copying $backup to $infodir/dir failed, giving 
up: $!\n;
+   print STDERR $name: no file $infodir, retrieving backup file 
$backup.\n;
+   if (system (cp $backup $infodir)) {
+   print STDERR $name: copying $backup to $infodir failed, giving up: 
$!\n;
exit 1;
}
 } else {
 if (-r $default) {
print STDERR $name: no backup file $backup available, retrieving 
default file.\n;

-   if (system(cp $default $infodir/dir)) {
-   print STDERR $name: copying $default to $infodir/dir failed, 
giving up: $!\n;
-   exit 1;
-}
+   if (system(cp $default $infodir)) {
+   print STDERR $name: copying $default to $infodir failed, 
giving up: $!\n;
+   exit 1;
+   }
} else {
print STDERR $name: no backup file $backup available.\n;
print STDERR $name: no default file $default available, giving 
up.\n;
@@ -273,15 +271,15 @@
 }
 }
 
-if (!$nowrite  !link($infodir/dir,$infodir/dir.lock)) {
+if (!$nowrite  !link($infodir,$infodir.lock)) {
 print STDERR $name: failed to lock dir for editing! $!\n.
-($! =~ m/exists/i ? try deleting $infodir/dir.lock ?\n : '');
+($! =~ m/exists/i ? try deleting $infodir.lock ?\n : '');
 }
 
-open(OLD,$infodir/dir) || ulquit(open $infodir/dir: $!);
+open(OLD,$infodir) || ulquit(open $infodir: $!);
 @work= OLD;
-eof(OLD) || ulquit(read $infodir/dir: $!);
-close(OLD) || ulquit(close $infodir/dir after read: $!);
+eof(OLD) || ulquit(read $infodir: $!);
+close(OLD) || ulquit(close $infodir after read: $!);
 while (($#work = 0)  ($work[$#work] !~ m/\S/)) { $#work--; }
 
 while (@work) {
@@ -443,22 +441,22 @@
 }
 
 if (!$nowrite) {
-open(NEW, $infodir/dir.new) || ulquit(create $infodir/dir.new: $!);
-print(NEW @head,join(\n,@newwork)) || ulquit(write $infodir/dir.new: 
$!);
-close(NEW) || ulquit(close $infodir/dir.new: 

Bug#353359: pop-before-smtp is in need of an update: 1.41 is the latest

[Wayne Davison]

FYI: the arrival of March 1st revealed a bug in 1.40's new timestamp
parsing, so version 1.41 was released earlier today.

..wayne..


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#353359: pop-before-smtp is in need of an update: 1.39 is the latest

[Wayne Davison]

Some significant changes in timestamp handling were just recently
finished, so I went ahead and released version 1.40.  FYI.

..wayne..


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#289396: pop-before-smtp: please provide configurable grace period

[Wayne Davison]

Simply edit the /etc/pop-before-smtp/pop-before-smtp.conf and look for
the commented $grace assignment:

# A 30-minute grace period before the IP address is expired.
#$grace = 30*60;

Change the second line to be uncommented and have whatever value (in
seconds) that you desire.  For instance, this chooses 90 minutes:

# A 90-minute grace period before the IP address is expired.
$grace = 90*60;

..wayne..


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#353359: pop-before-smtp is in need of an update: 1.39 is the latest

[Wayne Davison]

Package: pop-before-smtp
Version: 1.36-2
Severity: wishlist


I'd like to see the pop-before-smtp package updated to version 1.39 in
testing.  Debian's current version is 1.36, which was released about 1.4
years ago.

Starting with the 1.37 release, pop-before-smtp has support for cached
IMAP connections (as used by Thunderbird), so it would be nice to see
this support make it into Debian testing.

The upgrade would also fix bugs #275707 and #320461 for Etch.  I think
bug #292245 is already fixed by 1.36 in Sarge.  Bug #289396 could also
be closed because pop-before-smtp already has support for a configurable
grace period.  FYI.

Thanks in advance!

-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (900, 'testing'), (800, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-686
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages pop-before-smtp depends on:
ii  libnet-netmask-perl   1.9012-1   parse, manipulate and lookup IP ne
ii  libtimedate-perl  1.1600-5   Time and date functions for Perl
ii  netbase   4.24   Basic TCP/IP networking system
ii  perl  5.8.7-10   Larry Wall's Practical Extraction 
ii  postfix [mail-transport-agent 2.2.8-9A high-performance mail transport 

pop-before-smtp recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#352759: Cannot build binary modules with kernel headers 2.6.15

[Wayne Stambaugh]

Package: gpib-modules-source
Version: 3.2.04-5

Fails to build kernel modules with 2.6.15 headers both with module
assistant and using debian/rules binary-modules.  This problem appears
to have been fixed by the upstream maintainers.  However, it has not
been released and is only available from CVS.  Here is a discussion
about the problem in the Linux GPIB project mailing list archives:
http://sourceforge.net/mailarchive/forum.php?thread_id=9639186forum_id=2853.




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#344113: rsync: tries to chdir() into a device (strace attached)

[Wayne Davison]

 A small hint: this problem is not deterministic.

The reason you might have thought that is that your test script has a
bug in it -- it's missing a trailing slash on the source directory.

FYI, this bug has been fixed for the 2.6.7 version (which is now in
a pre-release testing phase).

..wayne..


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#158170: rsync: hangs or exits with strange errors when pulling files

[Wayne Davison]

Russ:  your strace output didn't list the 3rd rsync process (there are
two processes on the receiving side and one on the sending side).  Also,
the issues and debugging page of the rsync website has some hints to
help debug problem scenarios, such as including what netstat says
about active socket connections and their send/receive buffers.  You
might also try using --blocking-io or --no-blocking-io to see if that
makes any difference (using --blocking-io fixed one situation recently).

Richard wrote:
 /usr/bin/rsync --no-detach --daemon --config /etc/rsyncd.conf
[...]
 rsync -a fs1::remote-name/ /localfilesystem/path/
[...]
 rsync error: timeout in data send/receive (code 30) at io.c(181)

The only way a timeout can occur without a client-specified --timeout
option is if the daemon's config file specifies a timeout, and that can
be problematical if it is too short to allow for any dead-time that can
occur during the transfer of a large file (what is it's setting?).  The
current protocol does not allow the daemon to tell the client about a
timeout setting, so the client can't help to prevent a timeout unless
there is also a command-line --timeout option specified (which should be
less-than or equal-to the daemon's timeout setting).  If timeouts still
occur with a long timeout value, treat the situation as a hang and get
some strace output of the 3 processes and the netstat output when the
connection stalls so that we can try to figure out what might be wrong.

..wayne..


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#166183: rsync: doesnt work if there are spaces in filenames

[Wayne Davison]

This is not really a bug, but the documented way rsync currently works.
It uses unescaped spaces to allow the user to ask for multiple arguments
from the remote host, and thus requires that filenames with spaces be
escaped in some shell-compatible manner.

Another way to avoid the problem is to use the --files-from option, even
if you're just asking for one file.   This works fine because filenames
read via --files-from are used literally, with no special handling
needed for space-containing names.

..wayne..


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#289707: rsync: crashes on partial file transfer

[Wayne Davison]

This must be a change in behavior on the part of a library or something.
I've just checked in the attached change so that it will come out in the
final 2.6.7 release (this patch is relative to 2.6.7pre1).

..wayne..
--- main.c  5 Feb 2006 04:52:11 -   1.293
+++ main.c  11 Feb 2006 02:35:27 -
@@ -1229,6 +1229,9 @@ int main(int argc,char *argv[])
/* Ignore SIGPIPE; we consistently check error codes and will
 * see the EPIPE. */
SIGACTION(SIGPIPE, SIG_IGN);
+#ifdef SIGXFSZ
+   SIGACTION(SIGXFSZ, SIG_IGN);
+#endif
 
/* Initialize push_dir here because on some old systems getcwd
 * (implemented by forking pwd and reading its output) doesn't