Same problem with 5.18.0-2-alpha-smp kernel (5.18.0-2-alpha-generic boots
fine).
Also tested with 6.0.0 kernel - same problem.
OpenBSD 6.6 and Tru64 boot fine on this machine and both use 2 processors.
Boot logs from 5.18.0-2-alpha-smp and 5.18.0-2-alpha-generic are below for
comparison:
aboot: loading uncompressed vmlinuz...
aboot: loading compressed vmlinuz...
aboot: zero-filling 376684 bytes at 0xfffffc0002550e4c
aboot: loading initrd (29170220 bytes/7121 blocks) at 0xfffffc00fe064000
aboot: starting kernel vmlinuz with arguments ro
root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0
[ 0.000000] Linux version 5.18.0-2-alpha-generic (
debian-ker...@lists.debian.org) (gcc-11 (Debian 11.3.0-3) 11.3.0, GNU ld
(GNU Binutils for Debian) 2.38.50.20220622) #1 Debian 5.18.5-1 (2022-06-16)
[ 0.000000] Booting GENERIC on Titan variation Granite using machine
vector PRIVATEER from SRM
[ 0.000000] Major Options: MAGIC_SYSRQ
[ 0.000000] Command line: ro
root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0
[ 0.000000] memcluster 0, usage 1, start 0, end 395
[ 0.000000] memcluster 1, usage 0, start 395, end 524279
[ 0.000000] memcluster 2, usage 1, start 524279, end 524288
[ 0.000000] Initial ramdisk at: 0x(____ptrval____) (29170220 bytes)
[ 0.000000] 8192K Bcache detected; load hit latency 24 cycles, load miss
latency 137 cycles
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000fffffffdfff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x00000000ffffffff]
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 520192
[ 0.000000] Kernel command line: ro
root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0
[ 0.000000] Dentry cache hash table entries: 524288 (order: 9, 4194304
bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 8, 2097152
bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] Memory: 4097288K/4194304K available (9074K kernel code,
9491K rwdata, 2768K rodata, 424K init, 367K bss, 97016K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 32784
[ 0.000000] Turning on RTC interrupts.
[ 0.000976] Console: colour dummy device 80x25
[ 0.027343] printk: console [ttyS0] enabled
[ 0.028320] Calibrating delay loop... 1987.32 BogoMIPS (lpj=969728)
[ 0.036132] pid_max: default: 32768 minimum: 301
[ 0.037109] LSM: Security Framework initializing
[ 0.038085] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.039062] AppArmor: AppArmor initialized
[ 0.040039] TOMOYO Linux initialized
[ 0.041992] Mount-cache hash table entries: 8192 (order: 3, 65536 bytes,
linear)
[ 0.042968] Mountpoint-cache hash table entries: 8192 (order: 3, 65536
bytes, linear)
[ 0.046874] cblist_init_generic: Setting adjustable number of callback
queues.
[ 0.047851] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.048828] Performance events: Supported CPU type!
[ 0.050781] devtmpfs: initialized
[ 0.054687] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1866466235866741 ns
[ 0.055664] futex hash table entries: 256 (order: -1, 6144 bytes, linear)
[ 0.057617] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.058593] audit: initializing netlink subsys (disabled)
[ 0.060546] thermal_sys: Registered thermal governor 'fair_share'
[ 0.060546] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.061523] thermal_sys: Registered thermal governor 'step_wise'
[ 0.062499] thermal_sys: Registered thermal governor 'user_space'
[ 0.063476] EISA bus registered
[ 0.065429] PCI host bridge to bus 0000:00
[ 0.066406] pci_bus 0000:00: root bus resource [io 0x0000-0x1ffffff]
[ 0.067382] pci_bus 0000:00: root bus resource [mem
0x00000000-0x7fffffff]
[ 0.068359] pci_bus 0000:00: No busn resource found for root bus, will
use [bus 00-ff]
[ 0.069335] pci 0000:00:07.0: [10b9:1533] type 00 class 0x060100
[ 0.070312] pci 0000:00:08.0: [8086:1209] type 00 class 0x020000
[ 0.071289] pci 0000:00:08.0: reg 0x10: [mem 0x01020000-0x01020fff]
[ 0.072265] pci 0000:00:08.0: reg 0x14: [io 0x10000-0x1003f]
[ 0.073242] pci 0000:00:08.0: reg 0x18: [mem 0x01000000-0x0101ffff]
[ 0.074218] pci 0000:00:08.0: supports D1 D2
[ 0.075195] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot
[ 0.076171] pci 0000:00:0c.0: [0e11:a0f7] type 00 class 0x080400
[ 0.077148] pci 0000:00:0c.0: reg 0x10: [mem 0x01021000-0x010210ff]
[ 0.079101] pci 0000:00:10.0: [10b9:5229] type 00 class 0x0101fa
[ 0.080078] pci 0000:00:10.0: [Firmware Bug]: reg 0x10: invalid BAR
(can't size)
[ 0.081054] pci 0000:00:10.0: [Firmware Bug]: reg 0x14: invalid BAR
(can't size)
[ 0.082031] pci 0000:00:10.0: [Firmware Bug]: reg 0x18: invalid BAR
(can't size)
[ 0.083007] pci 0000:00:10.0: [Firmware Bug]: reg 0x1c: invalid BAR
(can't size)
[ 0.083984] pci 0000:00:10.0: reg 0x20: [io 0x10050-0x1005f]
[ 0.084960] pci 0000:00:10.0: legacy IDE quirk: reg 0x10: [io
0x01f0-0x01f7]
[ 0.085937] pci 0000:00:10.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.086914] pci 0000:00:10.0: legacy IDE quirk: reg 0x18: [io
0x0170-0x0177]
[ 0.087890] pci 0000:00:10.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.088867] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.089843] PCI host bridge to bus 0001:01
[ 0.091796] pci_bus 0001:01: root bus resource [io
0x200000000-0x201ffffff] (bus address [0x0000-0x1ffffff])
[ 0.092773] pci_bus 0001:01: root bus resource [mem
0x200000000-0x27fffffff] (bus address [0x00000000-0x7fffffff])
[ 0.093749] pci_bus 0001:01: No busn resource found for root bus, will
use [bus 01-ff]
[ 0.094726] pci 0001:01:01.0: [3d3d:000a] type 00 class 0x030000
[ 0.095703] pci 0001:01:01.0: reg 0x10: [mem 0x201000000-0x20101ffff]
[ 0.097656] pci 0001:01:01.0: reg 0x14: [mem 0x240000000-0x243ffffff
pref]
[ 0.098632] pci 0001:01:01.0: reg 0x18: [mem 0x244000000-0x247ffffff
pref]
[ 0.099609] pci 0001:01:01.0: reg 0x30: [mem 0x201020000-0x20102ffff
pref]
[ 0.100585] pci 0001:01:01.0: supports D1
[ 0.101562] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.103515] PCI host bridge to bus 0002:02
[ 0.104492] pci_bus 0002:02: root bus resource [io
0x400000000-0x401ffffff] (bus address [0x0000-0x1ffffff])
[ 0.105468] pci_bus 0002:02: root bus resource [mem
0x400000000-0x47fffffff] (bus address [0x00000000-0x7fffffff])
[ 0.106445] pci_bus 0002:02: No busn resource found for root bus, will
use [bus 02-ff]
[ 0.107421] pci 0002:02:01.0: [9005:00cf] type 00 class 0x010000
[ 0.108398] pci 0002:02:01.0: reg 0x10: [io 0x400001000-0x4000010ff]
[ 0.109374] pci 0002:02:01.0: reg 0x14: [mem 0x401050000-0x401050fff
64bit]
[ 0.110351] pci 0002:02:01.0: reg 0x30: [mem 0x401000000-0x40101ffff
pref]
[ 0.111328] pci 0002:02:01.1: [9005:00cf] type 00 class 0x010000
[ 0.112304] pci 0002:02:01.1: reg 0x10: [io 0x400001100-0x4000011ff]
[ 0.113281] pci 0002:02:01.1: reg 0x14: [mem 0x401051000-0x401051fff
64bit]
[ 0.114257] pci 0002:02:01.1: reg 0x30: [mem 0x401020000-0x40103ffff
pref]
[ 0.116210] pci 0002:02:05.0: [14e4:16a7] type 00 class 0x020000
[ 0.117187] pci 0002:02:05.0: reg 0x10: [mem 0x401040000-0x40104ffff
64bit]
[ 0.118164] pci 0002:02:05.0: PME# supported from D3hot
[ 0.119140] pci_bus 0002:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.120117] PCI host bridge to bus 0003:03
[ 0.121093] pci_bus 0003:03: root bus resource [io
0x600000000-0x601ffffff] (bus address [0x0000-0x1ffffff])
[ 0.122070] pci_bus 0003:03: root bus resource [mem
0x600000000-0x67fffffff] (bus address [0x00000000-0x7fffffff])
[ 0.123046] pci_bus 0003:03: No busn resource found for root bus, will
use [bus 03-ff]
[ 0.124023] pci 0003:03:06.0: [0e11:a0f7] type 00 class 0x080400
[ 0.124999] pci 0003:03:06.0: reg 0x10: [mem 0x601000000-0x6010000ff]
[ 0.125976] pci_bus 0003:03: busn_res: [bus 03-ff] end is updated to 03
[ 0.126953] pci_bus 0000:00: resource 4 [io 0x0000-0x1ffffff]
[ 0.127929] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffff]
[ 0.128906] pci_bus 0001:01: resource 4 [io 0x200000000-0x201ffffff]
[ 0.129882] pci_bus 0001:01: resource 5 [mem 0x200000000-0x27fffffff]
[ 0.130859] pci_bus 0002:02: resource 4 [io 0x400000000-0x401ffffff]
[ 0.131835] pci_bus 0002:02: resource 5 [mem 0x400000000-0x47fffffff]
[ 0.132812] pci_bus 0003:03: resource 4 [io 0x600000000-0x601ffffff]
[ 0.133788] pci_bus 0003:03: resource 5 [mem 0x600000000-0x67fffffff]
[ 0.134765] Console: switching to colour VGA+ 80x25
[ 0.136718] audit: type=2000 audit(0.059:1): state=initialized
audit_enabled=0 res=1
[ 0.142578] iommu: Default domain type: Translated
[ 0.143554] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.145507] NetLabel: Initializing
[ 0.146484] NetLabel: domain hash size = 128
[ 0.147460] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.148437] NetLabel: unlabeled traffic allowed by default
[ 0.149413] pci 0001:01:01.0: vgaarb: setting as boot VGA device
[ 0.149413] pci 0001:01:01.0: vgaarb: bridge control possible
[ 0.149413] pci 0001:01:01.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.150390] vgaarb: loaded
[ 0.152343] VFS: Disk quotas dquot_6.6.0
[ 0.153320] VFS: Dquot-cache hash table entries: 1024 (order 0, 8192
bytes)
[ 0.155273] AppArmor: AppArmor Filesystem Enabled
[ 0.162109] NET: Registered PF_INET protocol family
[ 0.163085] IP idents hash table entries: 65536 (order: 6, 524288 bytes,
linear)
[ 0.167968] tcp_listen_portaddr_hash hash table entries: 2048 (order: 2,
32768 bytes, linear)
[ 0.168945] Table-perturb hash table entries: 65536 (order: 5, 262144
bytes, linear)
[ 0.169921] TCP established hash table entries: 32768 (order: 5, 262144
bytes, linear)
[ 0.171874] TCP bind hash table entries: 32768 (order: 5, 262144 bytes,
linear)
[ 0.172851] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.174804] MPTCP token hash table entries: 4096 (order: 3, 98304 bytes,
linear)
[ 0.176757] UDP hash table entries: 2048 (order: 3, 65536 bytes, linear)
[ 0.177734] UDP-Lite hash table entries: 2048 (order: 3, 65536 bytes,
linear)
[ 0.179687] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.180663] NET: Registered PF_XDP protocol family
[ 0.181640] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 0.182617] pci 0000:00:08.0: Firmware left e100 interrupts enabled;
disabling
[ 0.183593] PCI: CLS 64 bytes, default 64
[ 0.184570] Using epoch 1980 for rtc year 43
[ 0.185546] Trying to unpack rootfs image as initramfs...
[ 0.210937] platform rtc-alpha: registered as rtc0
[ 0.211913] platform rtc-alpha: setting system clock to
2023-04-09T17:02:58 UTC (1681059778)
[ 0.213867] Initialise system trusted keyrings
[ 0.214843] Key type blacklist registered
[ 0.220703] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.229492] zbud: loaded
[ 0.231445] integrity: Platform Keyring initialized
[ 0.232421] Key type asymmetric registered
[ 0.233398] Asymmetric key parser 'x509' registered
[ 2.041014] Freeing initrd memory: 28480K
[ 2.065428] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 2.067381] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 251)
[ 2.068358] io scheduler mq-deadline registered
[ 2.072264] isapnp: Scanning for PnP cards...
[ 2.426756] isapnp: No Plug & Play device found
[ 2.427733] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.429686] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 2.431639] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
is a 16550A
[ 2.433592] Linux agpgart interface v0.103
[ 2.438475] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.439451] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.440428] mousedev: PS/2 mouse device common for all mice
[ 2.441405] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.443358] NET: Registered PF_INET6 protocol family
[ 2.464842] Segment Routing with IPv6
[ 2.465819] In-situ OAM (IOAM) with IPv6
[ 2.466795] mip6: Mobile IPv6
[ 2.467772] NET: Registered PF_PACKET protocol family
[ 2.468748] atkbd serio0: keyboard reset failed on isa0060/serio0
[ 2.469725] mpls_gso: MPLS GSO support
[ 2.471678] registered taskstats version 1
[ 2.472654] Loading compiled-in X.509 certificates
[ 2.556639] atkbd serio1: keyboard reset failed on isa0060/serio1
[ 2.671873] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 2.672850] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux:
4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 2.674803] zswap: loaded using pool lzo/zbud
[ 2.675779] Key type ._fscrypt registered
[ 2.676756] Key type .fscrypt registered
[ 2.677733] Key type fscrypt-provisioning registered
[ 2.698240] Key type encrypted registered
[ 2.699217] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.700193] ima: No TPM chip found, activating TPM-bypass!
[ 2.701170] ima: Allocated hash algorithm: sha256
[ 2.702147] ima: No architecture policies found
[ 2.703123] evm: Initialising EVM extended attributes:
[ 2.704100] evm: security.selinux
[ 2.705076] evm: security.SMACK64 (disabled)
[ 2.706053] evm: security.SMACK64EXEC (disabled)
[ 2.707029] evm: security.SMACK64TRANSMUTE (disabled)
[ 2.708006] evm: security.SMACK64MMAP (disabled)
[ 2.708982] evm: security.apparmor
[ 2.709959] evm: security.ima
[ 2.710936] evm: security.capability
[ 2.711912] evm: HMAC attrs: 0x1
[ 3.038084] Freeing unused kernel image (initmem) memory: 424K
[ 3.039060] This architecture does not have kernel memory protection.
[ 3.040037] Run /init as init process
Loading, please wait...
Starting version 251.4-3
[ 3.300779] mii: module verification failed: signature and/or required
key missing - tainting kernel
[ 3.310545] e100: Intel(R) PRO/100 Network Driver
[ 3.311521] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.336912] e100 0000:00:08.0 eth0: addr 0x1020000, irq 36, MAC addr
00:02:a5:20:03:cd
[ 3.348631] pps_core: LinuxPPS API ver. 1 registered
[ 3.349607] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 3.354490] PTP clock support registered
[ 3.367185] SCSI subsystem initialized
[ 3.664060] scsi host1: pata_ali
[ 3.673826] scsi host2: pata_ali
[ 3.674802] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x10050 irq
14
[ 3.675779] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x10058 irq
15
[ 3.735349] e100 0000:00:08.0 enp0s8: renamed from eth0
[ 3.776365] tg3 0002:02:05.0 eth0: Tigon3 [partno(BCM95703A30) rev 1002]
(PCI:66MHz:64-bit) MAC address 00:02:a5:c6:02:6e
[ 3.777341] tg3 0002:02:05.0 eth0: attached PHY is 5703
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 3.778318] tg3 0002:02:05.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0]
ASF[0] TSOcap[1]
[ 3.779294] tg3 0002:02:05.0 eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 3.838865] ata1.00: ATAPI: HL-DT-ST GCE-8320B, 2.04, max UDMA/33
[ 3.840818] ata1.00: WARNING: ATAPI DMA disabled for reliability
issues. It can be enabled
[ 3.841794] ata1.00: WARNING: via pata_ali.atapi_dma modparam or
corresponding sysfs node.
[ 3.846677] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8320B
2.04 PQ: 0 ANSI: 5
[ 4.028318] tg3 0002:02:05.0 enP2p2s5: renamed from eth0
[ 4.052732] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw
xa/form2 cdda tray
[ 4.053708] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 16.012687] random: crng init done
[ 18.999990] scsi host0: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER,
Rev 7.0
[ 18.999990] <Adaptec aic7899 Ultra160 SCSI adapter>
[ 18.999990] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253
SCBs
[ 18.999990]
[ 19.214833] scsi 0:0:0:0: Direct-Access COMPAQ BF03664664
3B0B PQ: 0 ANSI: 2
[ 19.215810] scsi0:A:0:0:
[ 19.215810] Tagged Queuing enabled. Depth 8
[ 19.217763] scsi target0:0:0: Beginning Domain Validation
[ 19.225576] scsi target0:0:0: wide asynchronous
[ 19.231435] scsi target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 63)
[ 19.238271] scsi 0:0:0:0: Power-on or device reset occurred
[ 19.244130] scsi target0:0:0: Ending Domain Validation
[ 19.249013] scsi 0:0:1:0: Direct-Access COMPAQ BF03665223
B014 PQ: 0 ANSI: 3
[ 19.249990] scsi0:A:1:0:
[ 19.249990] Tagged Queuing enabled. Depth 8
[ 19.251943] scsi target0:0:1: Beginning Domain Validation
[ 19.254872] scsi target0:0:1: wide asynchronous
[ 19.256826] scsi target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 127)
[ 19.259755] scsi 0:0:1:0: Power-on or device reset occurred
[ 19.265615] scsi target0:0:1: Ending Domain Validation
[ 19.268544] scsi 0:0:2:0: Direct-Access SEAGATE ST373207LC
7804 PQ: 0 ANSI: 3
[ 19.269521] scsi0:A:2:0:
[ 19.269521] Tagged Queuing enabled. Depth 8
[ 19.271474] scsi target0:0:2: Beginning Domain Validation
[ 19.276357] scsi target0:0:2: wide asynchronous
[ 19.279287] scsi target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 63)
[ 19.284169] scsi 0:0:2:0: Power-on or device reset occurred
[ 19.289052] scsi target0:0:2: Ending Domain Validation
[ 19.291982] scsi 0:0:3:0: Direct-Access SEAGATE ST373207LC
7804 PQ: 0 ANSI: 3
[ 19.292958] scsi0:A:3:0:
[ 19.292958] Tagged Queuing enabled. Depth 8
[ 19.294911] scsi target0:0:3: Beginning Domain Validation
[ 19.299794] scsi target0:0:3: wide asynchronous
[ 19.302724] scsi target0:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 63)
[ 19.307607] scsi 0:0:3:0: Power-on or device reset occurred
[ 19.312490] scsi target0:0:3: Ending Domain Validation
[ 19.315419] scsi 0:0:4:0: Direct-Access COMPAQ BD30089BBA
HPB1 PQ: 0 ANSI: 3
[ 19.316396] scsi0:A:4:0:
[ 19.316396] Tagged Queuing enabled. Depth 8
[ 19.318349] scsi target0:0:4: Beginning Domain Validation
[ 19.325185] scsi target0:0:4: wide asynchronous
[ 19.331044] scsi target0:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 127)
[ 19.336904] scsi 0:0:4:0: Power-on or device reset occurred
[ 19.340810] scsi target0:0:4: Ending Domain Validation
[ 19.344716] scsi 0:0:5:0: Direct-Access COMPAQ BD30089BBA
HPB1 PQ: 0 ANSI: 3
[ 19.345693] scsi0:A:5:0:
[ 19.345693] Tagged Queuing enabled. Depth 8
[ 19.347646] scsi target0:0:5: Beginning Domain Validation
[ 19.354482] scsi target0:0:5: wide asynchronous
[ 19.359365] scsi target0:0:5: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 127)
[ 19.365224] scsi 0:0:5:0: Power-on or device reset occurred
[ 19.369130] scsi target0:0:5: Ending Domain Validation
[ 34.499982] scsi host3: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER,
Rev 7.0
[ 34.499982] <Adaptec aic7899 Ultra160 SCSI adapter>
[ 34.499982] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253
SCBs
[ 34.499982]
[ 38.414042] sd 0:0:0:0: [sda] 71132000 512-byte logical blocks: (36.4
GB/33.9 GiB)
[ 38.415019] sd 0:0:2:0: [sdc] 143374744 512-byte logical blocks: (73.4
GB/68.4 GiB)
[ 38.415995] sd 0:0:1:0: [sdb] 71132000 512-byte logical blocks: (36.4
GB/33.9 GiB)
[ 38.418925] sd 0:0:2:0: [sdc] Write Protect is off
[ 38.420878] sd 0:0:1:0: [sdb] Write Protect is off
[ 38.422831] sd 0:0:0:0: [sda] Write Protect is off
[ 38.426738] sd 0:0:2:0: [sdc] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 38.427714] sd 0:0:1:0: [sdb] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 38.430644] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 38.434550] sd 0:0:3:0: [sdd] 143374744 512-byte logical blocks: (73.4
GB/68.4 GiB)
[ 38.437480] sd 0:0:3:0: [sdd] Write Protect is off
[ 38.439433] sd 0:0:4:0: [sde] 585937500 512-byte logical blocks: (300
GB/279 GiB)
[ 38.440410] sd 0:0:3:0: [sdd] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 38.441386] sdb: sdb1 sdb2 sdb3
[ 38.444316] sd 0:0:4:0: [sde] Write Protect is off
[ 38.446269] sd 0:0:5:0: [sdf] 585937500 512-byte logical blocks: (300
GB/279 GiB)
[ 38.453105] sd 0:0:4:0: [sde] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 38.454081] sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8
[ 38.456034] sd 0:0:5:0: [sdf] Write Protect is off
[ 38.459941] sd 0:0:5:0: [sdf] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 38.460917] sdd: sdd1 sdd2 sdd3 sdd4
[ 38.461894] sda: sda1 sda2 sda3 sda4
[ 38.463847] sd 0:0:2:0: [sdc] Attached SCSI disk
[ 38.471659] sd 0:0:3:0: [sdd] Attached SCSI disk
[ 38.472636] sd 0:0:0:0: [sda] Attached SCSI disk
[ 38.473613] sde: sde1
[ 38.476542] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 38.477519] sdf: sdf1
[ 38.479472] sd 0:0:4:0: [sde] Attached SCSI disk
[ 38.483378] sd 0:0:5:0: [sdf] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ...
done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.37.3
[/sbin/fsck.ext4 (1) -- /dev/sdd3] fsck[ 39.987284] EXT4-fs (sdd3):
mounted filesystem with ordered data mode. Quota mode: none.
.ext4 -a -C0 /dev/sdd3
Linux: clean, 81565/4358144 files, 15949768/17431640 blocks
done.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 40.271463] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 41.989236] systemd[1]: Inserted module 'autofs4'
[ 42.430642] systemd[1]: systemd 251.4-3 running in system mode (+PAM
+AUDIT +SELINUX +APPARMOR +IMA +SMACK -SECCOMP +GCRYPT -GNUTLS +OPENSSL
+ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP
+LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB
+ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 42.431618] systemd[1]: Detected architecture alpha.
Welcome to Debian GNU/Linux bookworm/sid!
[ 42.518532] systemd[1]: Hostname set to <AlphaSMP>.
[ 44.078102] systemd[1]: Queued start job for default target Graphical
Interface.
[ 44.083961] systemd[1]: Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/getty.
[ 44.160133] systemd[1]: Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/modprobe.
[ 44.239235] systemd[1]: Created slice Slice /system/serial-getty.
[ OK ] Created slice Slice /system/serial-getty.
[ 44.322242] systemd[1]: Created slice Slice /system/systemd-fsck.
[ OK ] Created slice Slice /system/systemd-fsck.
[ 44.405250] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 44.484352] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ OK ] Started Dispatch Password .ts to Console Directory Watch.
[ 44.586891] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ OK ] Started Forward Password R.uests to Wall Directory Watch.
[ 44.689430] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ OK ] Set up automount Arbitrary.s File System Automount Point.
[ 44.792945] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 44.872047] systemd[1]: Reached target Local Integrity Protected Volumes.
[ OK ] Reached target Local Integrity Protected Volumes.
[ 44.962867] systemd[1]: Reached target Path Units.
[ OK ] Reached target Path Units.
[ 45.029273] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 45.107398] systemd[1]: Reached target Slice Units.
[ OK ] Reached target Slice Units.
[ 45.177711] systemd[1]: Reached target Local Verity Protected Volumes.
[ OK ] Reached target Local Verity Protected Volumes.
[ 45.264625] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 45.333961] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 45.425757] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 45.512672] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 45.586890] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 45.668921] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 45.748023] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 45.822242] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 45.897437] systemd[1]: Huge Pages File System was skipped because of a
failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 45.902320] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 45.980445] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 46.045874] systemd[1]: Kernel Trace File System was skipped because of
a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[ 46.058570] systemd[1]: Starting Set the console keyboard layout...
Starting Set the console keyboard layout...
[ 46.136695] systemd[1]: Starting Create List of Static Device Nodes...
Starting Create List of Static Device Nodes...
[ 46.215796] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 46.293921] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 46.367163] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 46.431616] fuse: init (API version 7.36)
[ 46.435523] systemd[1]: File System Check on Root Device was skipped
because of a failed condition check
(ConditionPathExists=!/run/initramfs/fsck-root).
[ 46.451148] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 46.559546] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 46.634741] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 46.713843] systemd[1]: Repartition Root Disk was skipped because all
trigger condition checks failed.
[ 46.722632] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Dev[ 46.777319] EXT4-fs (sdd3):
re-mounted. Quota mode: none.
ices...
[ 46.819311] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 46.904272] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Finished Set the console keyboard layout.
[ OK ] Finished Create List of Static Device Nodes.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Finished Coldplug All udev Devices.
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
Starting Helper to synchronize boot up for ifupdown...
Starting Flush Journal to Pers[ 47.972631]
systemd-journald[198]: Received client request to flush runtime journal.
istent Storage...
Starting Load/Save Random Seed...
Starting Apply Kernel Variables...
Starting Create System Users...
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ OK ] Finished Load/Save Random Seed.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
Starting Rule-based Manage.for Device Events and Files...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Found device /dev/ttyS0.
[ 50.914036] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 50.978489] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 50.980442] sd 0:0:0:0: Attached scsi generic sg1 type 0
[ 50.985325] sd 0:0:1:0: Attached scsi generic sg2 type 0
[ 50.990208] sd 0:0:2:0: Attached scsi generic sg3 type 0
[ 50.996067] sd 0:0:3:0: Attached scsi generic sg4 type 0
[ 51.001927] sd 0:0:4:0: Attached scsi generic sg5 type 0
[ 51.008762] sd 0:0:5:0: Attached scsi generic sg6 type 0
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Found device ST373207LC Boot.
[ OK ] Found device ST373207LC.
Activating swap /dev/disk/.856b-4df9-9ba5-be[ 52.279270] Adding
983256k swap on /dev/sdd4. Priority:-2 extents:1 across:983256k FS
b23566dbff...
Starting File System Check.0ba1-4af0-9cd2-982d9e1d70ed...
[ OK ] Activated swap /dev/disk/b.c-856b-4df9-9ba5-beb23566dbff.
[ OK ] Reached target Swaps.
[ OK ] Started File System Check Daemon to report status.
[ OK ] Finished File System Check.3-0ba1-4af0-9cd2-982d9e1d70ed.
Mounting /boot[ 52.800754] EXT4-fs (sdd2): mounting ext2 file
system using the ext4 subsystem
...
[ 52.814426] EXT4-fs (sdd2): mounted filesystem without journal. Quota
mode: none.
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Load AppArmor profiles...
Starting Set console font and keymap...
Starting Create Volatile Files and Directories...
[ OK ] Finished Set console font and keymap.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Record System Boot/Shutdown in UTMP...
[ 53.724581] audit: type=1400 audit(1681059832.036:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=283
comm="apparmor_parser"
[ 53.801730] audit: type=1400 audit(1681059832.112:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe"
pid=286 comm="apparmor_parser"
[ 53.802706] audit: type=1400 audit(1681059832.112:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=286 comm="apparmor_parser"
[ OK ] Finished Record System Boot/Shutdow[ 53.879855] audit: type=1400
audit(1681059832.190:5): apparmor="STATUS" operation="profile_load"
profile="unconfined" name="/usr/bin/man" pid=287 comm="apparmor_parser"
n in UTMP.
[ 53.880831] audit: type=1400 audit(1681059832.190:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=287
comm="apparmor_parser"
[ 53.881808] audit: type=1400 audit(1681059832.190:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=287
comm="apparmor_parser"
[ OK ] Started Network Time Synchronization.
[ OK ] Reached targ[ 54.050753] audit: type=1400
audit(1681059832.363:8): apparmor="STATUS" operation="profile_load"
profile="unconfined" name="/usr/sbin/ntpd" pid=288 comm="apparmor_parser"
et System Time Set.
[ OK ] Finished Load AppArmor profiles.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Started Daily dpkg database backup timer.
[ OK ] Started Periodic ext4 Onli.ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily man-db regeneration.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timer Units.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Socket Units.
[ OK ] Reached target Basic System.
[ OK ] Started Regular background program processing daemon.
Starting D-Bus System Message Bus...
Starting Remove Stale Onli.t4 Metadata Check Snapshots...
[ OK ] Started ifup for enp0s8.
Starting Raise network interfaces...
Starting System Logging Service...
Starting User Login Management...
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started User Login Management.
[ OK 56.152315] e100 0000:00:08.0: firmware: direct-loading firmware
e100/d101s_ucode.bin
0m] Finished 56.166963] e100 0000:00:08.0 enp0s8: NIC Link is Up 100
Mbps Full Duplex
;1;39mRemove Sta[ 56.169893] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s8: link
becomes ready
le Onli.ext4 Metadata Check Snapshots.
[ OK ] Finished Raise network interfaces.
[ OK ] Started System Logging Service.
[ OK ] Reached target Network.
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Record Runlevel Change in UTMP...
[ OK ] Finished Record Runlevel Change in UTMP.
Debian GNU/Linux bookworm/sid AlphaSMP ttyS0
AlphaSMP login:
aboot: loading uncompressed vmlinuz.old...
aboot: loading compressed vmlinuz.old...
aboot: zero-filling 376916 bytes at 0xfffffc0002803e9c
aboot: loading initrd (29364484 bytes/7169 blocks) at 0xfffffc00fdfd0000
aboot: starting kernel vmlinuz.old with arguments ro
root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0
[ 0.000000] Linux version 5.18.0-2-alpha-smp (
debian-ker...@lists.debian.org) (gcc-11 (Debian 11.3.0-3) 11.3.0, GNU ld
(GNU Binutils for Debian) 2.38.50.20220622) #1 SMP Debian 5.18.5-1
(2022-06-16)
[ 0.000000] Booting GENERIC on Titan variation Granite using machine
vector PRIVATEER from SRM
[ 0.000000] Major Options: SMP MAGIC_SYSRQ
[ 0.000000] Command line: ro
root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0
[ 0.000000] memcluster 0, usage 1, start 0, end 395
[ 0.000000] memcluster 1, usage 0, start 395, end 524279
[ 0.000000] memcluster 2, usage 1, start 524279, end 524288
[ 0.000000] Initial ramdisk at: 0x(____ptrval____) (29364484 bytes)
[ 0.000000] 8192K Bcache detected; load hit latency 24 cycles, load miss
latency 137 cycles
[ 0.000000] SMP: 2 CPUs probed -- cpu_present_mask = 3
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000fffffffdfff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x00000000ffffffff]
[ 0.000000] percpu: Embedded 8 pages/cpu s24128 r8192 d33216 u65536
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 520192
[ 0.000000] Kernel command line: ro
root=UUID=15b2a3ef-adbc-49a5-b99e-7d2c9cf9d073 console=ttyS0
[ 0.000000] Dentry cache hash table entries: 524288 (order: 9, 4194304
bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 8, 2097152
bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] Memory: 4094240K/4194304K available (9802K kernel code,
11327K rwdata, 2920K rodata, 472K init, 368K bss, 100064K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=32 to
nr_cpu_ids=2.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is
102 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 32784
[ 0.000000] Turning on RTC interrupts.
[ 0.000976] Console: colour dummy device 80x25
[ 0.034179] printk: console [ttyS0] enabled
[ 0.035156] Calibrating delay loop... 1987.32 BogoMIPS (lpj=969728)
[ 0.042968] pid_max: default: 32768 minimum: 301
[ 0.043945] LSM: Security Framework initializing
[ 0.044921] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.045898] AppArmor: AppArmor initialized
[ 0.046874] TOMOYO Linux initialized
[ 0.048828] Mount-cache hash table entries: 8192 (order: 3, 65536 bytes,
linear)
[ 0.049804] Mountpoint-cache hash table entries: 8192 (order: 3, 65536
bytes, linear)
[ 0.052734] SMP starting up secondaries.
[ 0.054687] cblist_init_generic: Setting adjustable number of callback
queues.
[ 0.055664] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.056640] Performance events: Supported CPU type!
[ 0.057617] rcu: Hierarchical SRCU implementation.
[ 0.059570] smp: Bringing up secondary CPUs ...
[ 0.071289] smp: Brought up 1 node, 2 CPUs
[ 0.072265] SMP: Total of 2 processors activated (3979.89 BogoMIPS).
[ 0.074218] devtmpfs: initialized
[ 0.080078] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1866466235866741 ns
[ 0.081054] futex hash table entries: 512 (order: 2, 32768 bytes, linear)
[ 0.083984] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.084960] audit: initializing netlink subsys (disabled)
[ 0.085937] audit: type=2000 audit(0.085:1): state=initialized
audit_enabled=0 res=1
[ 0.086914] thermal_sys: Registered thermal governor 'fair_share'
[ 0.087890] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.088867] thermal_sys: Registered thermal governor 'step_wise'
[ 0.089843] thermal_sys: Registered thermal governor 'user_space'
[ 0.090820] EISA bus registered
[ 0.092773] PCI host bridge to bus 0000:00
[ 0.093749] pci_bus 0000:00: root bus resource [io 0x0000-0x1ffffff]
[ 0.094726] pci_bus 0000:00: root bus resource [mem
0x00000000-0x7fffffff]
[ 0.095703] pci_bus 0000:00: No busn resource found for root bus, will
use [bus 00-ff]
[ 0.096679] pci 0000:00:07.0: [10b9:1533] type 00 class 0x060100
[ 0.097656] pci 0000:00:08.0: [8086:1209] type 00 class 0x020000
[ 0.098632] pci 0000:00:08.0: reg 0x10: [mem 0x01020000-0x01020fff]
[ 0.099609] pci 0000:00:08.0: reg 0x14: [io 0x10000-0x1003f]
[ 0.100585] pci 0000:00:08.0: reg 0x18: [mem 0x01000000-0x0101ffff]
[ 0.101562] pci 0000:00:08.0: supports D1 D2
[ 0.102539] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot
[ 0.104492] pci 0000:00:0c.0: [0e11:a0f7] type 00 class 0x080400
[ 0.105468] pci 0000:00:0c.0: reg 0x10: [mem 0x01021000-0x010210ff]
[ 0.106445] pci 0000:00:10.0: [10b9:5229] type 00 class 0x0101fa
[ 0.107421] pci 0000:00:10.0: [Firmware Bug]: reg 0x10: invalid BAR
(can't size)
[ 0.108398] pci 0000:00:10.0: [Firmware Bug]: reg 0x14: invalid BAR
(can't size)
[ 0.110351] pci 0000:00:10.0: [Firmware Bug]: reg 0x18: invalid BAR
(can't size)
[ 0.111328] pci 0000:00:10.0: [Firmware Bug]: reg 0x1c: invalid BAR
(can't size)
[ 0.112304] pci 0000:00:10.0: reg 0x20: [io 0x10050-0x1005f]
[ 0.113281] pci 0000:00:10.0: legacy IDE quirk: reg 0x10: [io
0x01f0-0x01f7]
[ 0.114257] pci 0000:00:10.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.115234] pci 0000:00:10.0: legacy IDE quirk: reg 0x18: [io
0x0170-0x0177]
[ 0.116210] pci 0000:00:10.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.117187] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.118164] PCI host bridge to bus 0001:01
[ 0.119140] pci_bus 0001:01: root bus resource [io
0x200000000-0x201ffffff] (bus address [0x0000-0x1ffffff])
[ 0.120117] pci_bus 0001:01: root bus resource [mem
0x200000000-0x27fffffff] (bus address [0x00000000-0x7fffffff])
[ 0.121093] pci_bus 0001:01: No busn resource found for root bus, will
use [bus 01-ff]
[ 0.122070] pci 0001:01:01.0: [3d3d:000a] type 00 class 0x030000
[ 0.123046] pci 0001:01:01.0: reg 0x10: [mem 0x201000000-0x20101ffff]
[ 0.124023] pci 0001:01:01.0: reg 0x14: [mem 0x240000000-0x243ffffff
pref]
[ 0.124999] pci 0001:01:01.0: reg 0x18: [mem 0x244000000-0x247ffffff
pref]
[ 0.125976] pci 0001:01:01.0: reg 0x30: [mem 0x201020000-0x20102ffff
pref]
[ 0.126953] pci 0001:01:01.0: supports D1
[ 0.127929] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.128906] PCI host bridge to bus 0002:02
[ 0.129882] pci_bus 0002:02: root bus resource [io
0x400000000-0x401ffffff] (bus address [0x0000-0x1ffffff])
[ 0.130859] pci_bus 0002:02: root bus resource [mem
0x400000000-0x47fffffff] (bus address [0x00000000-0x7fffffff])
[ 0.131835] pci_bus 0002:02: No busn resource found for root bus, will
use [bus 02-ff]
[ 0.132812] pci 0002:02:01.0: [9005:00cf] type 00 class 0x010000
[ 0.133788] pci 0002:02:01.0: reg 0x10: [io 0x400001000-0x4000010ff]
[ 0.134765] pci 0002:02:01.0: reg 0x14: [mem 0x401050000-0x401050fff
64bit]
[ 0.135742] pci 0002:02:01.0: reg 0x30: [mem 0x401000000-0x40101ffff
pref]
[ 0.136718] pci 0002:02:01.1: [9005:00cf] type 00 class 0x010000
[ 0.137695] pci 0002:02:01.1: reg 0x10: [io 0x400001100-0x4000011ff]
[ 0.138671] pci 0002:02:01.1: reg 0x14: [mem 0x401051000-0x401051fff
64bit]
[ 0.139648] pci 0002:02:01.1: reg 0x30: [mem 0x401020000-0x40103ffff
pref]
[ 0.140624] pci 0002:02:05.0: [14e4:16a7] type 00 class 0x020000
[ 0.141601] pci 0002:02:05.0: reg 0x10: [mem 0x401040000-0x40104ffff
64bit]
[ 0.142578] pci 0002:02:05.0: PME# supported from D3hot
[ 0.143554] pci_bus 0002:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.144531] PCI host bridge to bus 0003:03
[ 0.146484] pci_bus 0003:03: root bus resource [io
0x600000000-0x601ffffff] (bus address [0x0000-0x1ffffff])
[ 0.147460] pci_bus 0003:03: root bus resource [mem
0x600000000-0x67fffffff] (bus address [0x00000000-0x7fffffff])
[ 0.148437] pci_bus 0003:03: No busn resource found for root bus, will
use [bus 03-ff]
[ 0.149413] pci 0003:03:06.0: [0e11:a0f7] type 00 class 0x080400
[ 0.150390] pci 0003:03:06.0: reg 0x10: [mem 0x601000000-0x6010000ff]
[ 0.151367] pci_bus 0003:03: busn_res: [bus 03-ff] end is updated to 03
[ 0.152343] pci_bus 0000:00: resource 4 [io 0x0000-0x1ffffff]
[ 0.153320] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffff]
[ 0.154296] pci_bus 0001:01: resource 4 [io 0x200000000-0x201ffffff]
[ 0.155273] pci_bus 0001:01: resource 5 [mem 0x200000000-0x27fffffff]
[ 0.156249] pci_bus 0002:02: resource 4 [io 0x400000000-0x401ffffff]
[ 0.157226] pci_bus 0002:02: resource 5 [mem 0x400000000-0x47fffffff]
[ 0.158203] pci_bus 0003:03: resource 4 [io 0x600000000-0x601ffffff]
[ 0.159179] pci_bus 0003:03: resource 5 [mem 0x600000000-0x67fffffff]
[ 0.160156] Console: switching to colour VGA+ 80x25
[ 0.169921] iommu: Default domain type: Translated
[ 0.170898] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.171874] SCSI subsystem initialized
[ 0.173828] NetLabel: Initializing
[ 0.174804] NetLabel: domain hash size = 128
[ 0.175781] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.176757] NetLabel: unlabeled traffic allowed by default
[ 0.177734] pci 0001:01:01.0: vgaarb: setting as boot VGA device
[ 0.177734] pci 0001:01:01.0: vgaarb: bridge control possible
[ 0.177734] pci 0001:01:01.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.178710] vgaarb: loaded
[ 0.180663] VFS: Disk quotas dquot_6.6.0
[ 0.181640] VFS: Dquot-cache hash table entries: 1024 (order 0, 8192
bytes)
[ 0.183593] AppArmor: AppArmor Filesystem Enabled
[ 0.193359] NET: Registered PF_INET protocol family
[ 0.194335] IP idents hash table entries: 65536 (order: 6, 524288 bytes,
linear)
[ 0.198242] tcp_listen_portaddr_hash hash table entries: 2048 (order: 2,
32768 bytes, linear)
[ 0.199218] Table-perturb hash table entries: 65536 (order: 5, 262144
bytes, linear)
[ 0.200195] TCP established hash table entries: 32768 (order: 5, 262144
bytes, linear)
[ 0.202148] TCP bind hash table entries: 32768 (order: 6, 524288 bytes,
linear)
[ 0.203124] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.205078] MPTCP token hash table entries: 4096 (order: 3, 98304 bytes,
linear)
[ 0.206054] UDP hash table entries: 2048 (order: 3, 65536 bytes, linear)
[ 0.207031] UDP-Lite hash table entries: 2048 (order: 3, 65536 bytes,
linear)
[ 0.208007] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.208984] NET: Registered PF_XDP protocol family
[ 0.210937] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 0.211913] pci 0000:00:08.0: Firmware left e100 interrupts enabled;
disabling
[ 0.212890] PCI: CLS 64 bytes, default 64
[ 0.213867] Using epoch 1980 for rtc year 43
[ 0.215820] platform rtc-alpha: registered as rtc0
[ 0.215820] Trying to unpack rootfs image as initramfs...
[ 0.216796] platform rtc-alpha: setting system clock to
2023-04-09T16:57:17 UTC (1681059437)
[ 0.219726] Initialise system trusted keyrings
[ 0.220703] Key type blacklist registered
[ 0.222656] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.233398] zbud: loaded
[ 0.235351] integrity: Platform Keyring initialized
[ 0.236328] Key type asymmetric registered
[ 0.237304] Asymmetric key parser 'x509' registered
[ 0.313476] ------------[ cut here ]------------
[ 0.313476] WARNING: CPU: 0 PID: 0 at kernel/rcu/tree.c:624
rcu_eqs_enter.constprop.0+0x174/0x180
[ 0.313476] Modules linked in:
[ 0.313476] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.18.0-2-alpha-smp
#1 Debian 5.18.5-1
[ 0.313476] fffffc0001cf7d08 0000000000000009 fffffc000198db6c
0000000000000000
[ 0.313476] 0000000000000000 fffffc00019994d4 fffffc000198dc34
0000000000000000
[ 0.313476] fffffc0001ab4059 fffffc00019994d4 fffffc00019994d4
fffffc0000329840
[ 0.313476] fffffc0001cf1840 fffffc0002834088 0000000000000000
fffffc0001cf4000
[ 0.313476] 0000000000000000 0000000011ed8e28 0000000000000270
0000000000000009
[ 0.313476] fffffc0002809118 0000000000000000 0000000000000800
fffffc00019a25f0
[ 0.313476] Trace:
[ 0.313476] [<fffffc000198db6c>] __warn+0xec/0x138
[ 0.313476] [<fffffc00019994d4>] rcu_eqs_enter.constprop.0+0x174/0x180
[ 0.313476] [<fffffc000198dc34>] warn_slowpath_fmt+0x7c/0xd8
[ 0.313476] [<fffffc00019994d4>] rcu_eqs_enter.constprop.0+0x174/0x180
[ 0.313476] [<fffffc00019994d4>] rcu_eqs_enter.constprop.0+0x174/0x180
[ 0.313476] [<fffffc00019a25f0>] default_idle_call+0x80/0xb0
[ 0.313476] [<fffffc00019a25c8>] default_idle_call+0x58/0xb0
[ 0.313476] [<fffffc000108f598>] do_idle+0xf8/0x210
[ 0.313476] Freeing initrd memory: 28672K
[ 0.313476] [<fffffc000108fa38>] cpu_startup_entry+0x48/0x60
[ 0.313476] [<fffffc0001999930>] rest_init+0x120/0x124
[ 0.313476] [<fffffc000101001c>] _stext+0x1c/0x20
[ 0.313476]
[ 0.313476] ---[ end trace 0000000000000000 ]---
[ 0.345702] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.346679] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 251)
[ 0.347656] io scheduler mq-deadline registered
[ 0.351562] isapnp: Scanning for PnP cards...
[ 0.708007] isapnp: No Plug & Play device found
[ 0.708984] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.710937] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 0.712890] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
is a 16550A
[ 0.714843] Linux agpgart interface v0.103
[ 0.721679] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.722655] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.723632] mousedev: PS/2 mouse device common for all mice
[ 0.724609] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.726562] NET: Registered PF_INET6 protocol family
[ 0.746093] atkbd serio0: keyboard reset failed on isa0060/serio0
[ 0.749999] Segment Routing with IPv6
[ 0.750976] In-situ OAM (IOAM) with IPv6
[ 0.751952] mip6: Mobile IPv6
[ 0.752929] NET: Registered PF_PACKET protocol family
[ 0.753905] mpls_gso: MPLS GSO support
[ 0.755858] registered taskstats version 1
[ 0.756835] Loading compiled-in X.509 certificates
[ 0.806640] atkbd serio1: keyboard reset failed on isa0060/serio1
[ 0.907226] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.908202] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux:
4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 0.910155] zswap: loaded using pool lzo/zbud
[ 0.911132] Key type ._fscrypt registered
[ 0.912108] Key type .fscrypt registered
[ 0.913085] Key type fscrypt-provisioning registered
[ 0.937499] Key type encrypted registered
[ 0.938476] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.939452] ima: No TPM chip found, activating TPM-bypass!
[ 0.940429] ima: Allocated hash algorithm: sha256
[ 0.941405] ima: No architecture policies found
[ 0.942382] evm: Initialising EVM extended attributes:
[ 0.943358] evm: security.selinux
[ 0.944335] evm: security.SMACK64 (disabled)
[ 0.945312] evm: security.SMACK64EXEC (disabled)
[ 0.946288] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.947265] evm: security.SMACK64MMAP (disabled)
[ 0.948241] evm: security.apparmor
[ 0.949218] evm: security.ima
[ 0.950194] evm: security.capability
[ 0.951171] evm: HMAC attrs: 0x1
[ 1.283202] Freeing unused kernel image (initmem) memory: 472K
[ 1.284179] This architecture does not have kernel memory protection.
[ 1.285155] Run /init as init process
Loading, please wait...
Starting version 251.4-3
[ 1.510741] random: crng init done
[ 1.577147] mii: module verification failed: signature and/or required
key missing - tainting kernel
[ 1.580077] e100: Intel(R) PRO/100 Network Driver
[ 1.581053] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.607421] e100 0000:00:08.0 eth0: addr 0x1020000, irq 36, MAC addr
00:02:a5:20:03:cd
[ 1.623046] pps_core: LinuxPPS API ver. 1 registered
[ 1.624022] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 1.625975] PTP clock support registered
[ 1.646483] scsi host1: pata_ali
[ 1.685546] scsi host2: pata_ali
[ 1.694335] e100 0000:00:08.0 enp0s8: renamed from eth0
[ 1.695311] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x10050 irq
14
[ 1.779295] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x10058 irq
15
[ 2.018553] ata1.00: ATAPI: HL-DT-ST GCE-8320B, 2.04, max UDMA/33
[ 2.019530] ata1.00: WARNING: ATAPI DMA disabled for reliability
issues. It can be enabled
[ 2.020506] ata1.00: WARNING: via pata_ali.atapi_dma modparam or
corresponding sysfs node.
[ 2.026366] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8320B
2.04 PQ: 0 ANSI: 5
[ 2.236326] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw
xa/form2 cdda tray
[ 2.237303] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.302733] tg3 0002:02:05.0 eth0: Tigon3 [partno(BCM95703A30) rev 1002]
(PCI:66MHz:64-bit) MAC address 00:02:a5:c6:02:6e
[ 2.303709] tg3 0002:02:05.0 eth0: attached PHY is 5703
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.304686] tg3 0002:02:05.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0]
ASF[0] TSOcap[1]
[ 2.305662] tg3 0002:02:05.0 eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 2.312498] tg3 0002:02:05.0 enP2p2s5: renamed from eth0
[ 16.999991] scsi host0: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER,
Rev 7.0
[ 16.999991] <Adaptec aic7899 Ultra160 SCSI adapter>
[ 16.999991] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253
SCBs
[ 16.999991]
[ 17.259756] scsi 0:0:0:0: Direct-Access COMPAQ BF03664664
3B0B PQ: 0 ANSI: 2
[ 17.260733] scsi0:A:0:0:
[ 17.260733] Tagged Queuing enabled. Depth 8
[ 17.291006] scsi target0:0:0: Beginning Domain Validation
[ 17.298819] scsi target0:0:0: wide asynchronous
[ 17.304678] scsi target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 63)
[ 17.311514] scsi 0:0:0:0: Power-on or device reset occurred
[ 17.321280] scsi target0:0:0: Ending Domain Validation
[ 17.388662] scsi 0:0:1:0: Direct-Access COMPAQ BF03665223
B014 PQ: 0 ANSI: 3
[ 17.485342] scsi0:A:1:0:
[ 17.485342] Tagged Queuing enabled. Depth 8
[ 17.571280] scsi target0:0:1: Beginning Domain Validation
[ 17.639639] scsi target0:0:1: wide asynchronous
[ 17.643545] scsi target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 127)
[ 17.649405] scsi 0:0:1:0: Power-on or device reset occurred
[ 17.724600] scsi target0:0:1: Ending Domain Validation
[ 17.789053] scsi 0:0:2:0: Direct-Access SEAGATE ST373207LC
7804 PQ: 0 ANSI: 3
[ 17.885733] scsi0:A:2:0:
[ 17.885733] Tagged Queuing enabled. Depth 8
[ 17.972647] scsi target0:0:2: Beginning Domain Validation
[ 18.041982] scsi target0:0:2: wide asynchronous
[ 18.046865] scsi target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 63)
[ 18.053701] scsi 0:0:2:0: Power-on or device reset occurred
[ 18.127920] scsi target0:0:2: Ending Domain Validation
[ 18.192373] scsi 0:0:3:0: Direct-Access SEAGATE ST373207LC
7804 PQ: 0 ANSI: 3
[ 18.289053] scsi0:A:3:0:
[ 18.289053] Tagged Queuing enabled. Depth 8
[ 18.374990] scsi target0:0:3: Beginning Domain Validation
[ 18.444326] scsi target0:0:3: wide asynchronous
[ 18.449209] scsi target0:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 63)
[ 18.456045] scsi 0:0:3:0: Power-on or device reset occurred
[ 18.530263] scsi target0:0:3: Ending Domain Validation
[ 18.594717] scsi 0:0:4:0: Direct-Access COMPAQ BD30089BBA
HPB1 PQ: 0 ANSI: 3
[ 18.691396] scsi0:A:4:0:
[ 18.691396] Tagged Queuing enabled. Depth 8
[ 18.778310] scsi target0:0:4: Beginning Domain Validation
[ 18.848623] scsi target0:0:4: wide asynchronous
[ 18.854482] scsi target0:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 127)
[ 18.861318] scsi 0:0:4:0: Power-on or device reset occurred
[ 18.934560] scsi target0:0:4: Ending Domain Validation
[ 18.999013] scsi 0:0:5:0: Direct-Access COMPAQ BD30089BBA
HPB1 PQ: 0 ANSI: 3
[ 19.095693] scsi0:A:5:0:
[ 19.095693] Tagged Queuing enabled. Depth 8
[ 19.181630] scsi target0:0:5: Beginning Domain Validation
[ 19.251943] scsi target0:0:5: wide asynchronous
[ 19.256826] scsi target0:0:5: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns,
offset 127)
[ 19.263662] scsi 0:0:5:0: Power-on or device reset occurred
[ 19.337880] scsi target0:0:5: Ending Domain Validation
[ 32.499983] scsi host3: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER,
Rev 7.0
[ 32.499983] <Adaptec aic7899 Ultra160 SCSI adapter>
[ 32.499983] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253
SCBs
[ 32.499983]
[ 36.666973] sd 0:0:0:0: [sda] 71132000 512-byte logical blocks: (36.4
GB/33.9 GiB)
[ 36.666973] sd 0:0:1:0: [sdb] 71132000 512-byte logical blocks: (36.4
GB/33.9 GiB)
[ 36.669903] sd 0:0:2:0: [sdc] 143374744 512-byte logical blocks: (73.4
GB/68.4 GiB)
[ 36.669903] sd 0:0:0:0: [sda] Write Protect is off
[ 36.672832] sd 0:0:3:0: [sdd] 143374744 512-byte logical blocks: (73.4
GB/68.4 GiB)
[ 36.672832] sd 0:0:1:0: [sdb] Write Protect is off
[ 36.673809] sd 0:0:2:0: [sdc] Write Protect is off
[ 36.675762] sd 0:0:5:0: [sde] 585937500 512-byte logical blocks: (300
GB/279 GiB)
[ 36.675762] sd 0:0:3:0: [sdd] Write Protect is off
[ 36.678692] sd 0:0:1:0: [sdb] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 36.679668] sd 0:0:4:0: [sdf] 585937500 512-byte logical blocks: (300
GB/279 GiB)
[ 36.680645] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 36.681621] sd 0:0:5:0: [sde] Write Protect is off
[ 36.683574] sd 0:0:4:0: [sdf] Write Protect is off
[ 36.684551] sd 0:0:2:0: [sdc] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 36.689434] sd 0:0:5:0: [sde] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 36.689434] sd 0:0:4:0: [sdf] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 36.690410] sd 0:0:3:0: [sdd] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 36.702129] sda: sda1 sda2 sda3 sda4
[ 36.717754] sde: sde1
[ 36.718731] sd 0:0:0:0: [sda] Attached SCSI disk
[ 36.720684] sdd: sdd1 sdd2 sdd3 sdd4
[ 36.725567] sdb: sdb1 sdb2 sdb3
[ 36.736309] sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8
[ 36.736309] sd 0:0:5:0: [sde] Attached SCSI disk
[ 36.737285] sdf: sdf1
[ 36.767559] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 36.769512] sd 0:0:3:0: [sdd] Attached SCSI disk
[ 36.776348] sd 0:0:4:0: [sdf] Attached SCSI disk
[ 36.780254] sd 0:0:2:0: [sdc] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ...
done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.37.3
[/sbin/fsck.ext4 (1) --[ 38.219706] EXT4-fs (sdd3): mounted filesystem
with ordered data mode. Quota mode: none.
/dev/sdd3] fsck.ext4 -a -C0 /dev/sdd3
Linux: clean, 81565/4358144 files, 15949768/17431640 blocks
done.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 38.640605] Not activating Mandatory Access Control as /sbin/tomoyo-init
does not exist.
[ 39.907206] systemd[1]: Inserted module 'autofs4'
[ 40.267557] systemd[1]: systemd 251.4-3 running in system mode (+PAM
+AUDIT +SELINUX +APPARMOR +IMA +SMACK -SECCOMP +GCRYPT -GNUTLS +OPENSSL
+ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP
+LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB
+ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 40.650369] systemd[1]: Detected architecture alpha.
Welcome to Debian GNU/Linux bookworm/sid!
[ 40.794900] systemd[1]: Hostname set to <AlphaSMP>.
[ 42.550759] systemd[1]: Queued start job for default target Graphical
Interface.
[ 42.644509] systemd[1]: Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/getty.
[ 42.786110] systemd[1]: Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/modprobe.
[ 42.933571] systemd[1]: Created slice Slice /system/serial-getty.
[ OK ] Created slice Slice /system/serial-getty.
[ 43.090798] systemd[1]: Created slice Slice /system/systemd-fsck.
[ OK ] Created slice Slice /system/systemd-fsck.
[ 43.174782] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 43.322243] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ OK ] Started Dispatch Password .ts to Console Directory Watch.
[ 43.519508] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ OK ] Started Forward Password R.uests to Wall Directory Watch.
[ 43.712868] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ OK ] Set up automount Arbitrary.s File System Automount Point.
[ 43.926735] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 44.075172] systemd[1]: Reached target Local Integrity Protected Volumes.
[ OK ] Reached target Local Integrity Protected Volumes.
[ 44.246071] systemd[1]: Reached target Path Units.
[ OK ] Reached target Path Units.
[ 44.368141] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 44.511695] systemd[1]: Reached target Slice Units.
[ OK ] Reached target Slice Units.
[ 44.638649] systemd[1]: Reached target Local Verity Protected Volumes.
[ OK ] Reached target Local Verity Protected Volumes.
[ 44.802711] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 44.926734] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 45.097633] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 45.262672] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 45.401343] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 45.553687] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 45.692359] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 45.830054] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 45.968726] systemd[1]: Huge Pages File System was skipped because of a
failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 46.125952] CPU 1
[ 46.125952] systemd(1): Instruction fault 4
[ 46.200171] pc = [<fffffc0005123bec>] ra = [<fffffc0005123be8>] ps =
0000 Tainted: G W E
[ 46.315405] pc is at 0xfffffc0005123bec
[ 46.361304] ra is at 0xfffffc0005123be8
[ 46.407202] v0 = 0000000000000000 t0 = 0000000000000001 t1 =
fffffc0005123b00
[ 46.494116] t2 = fffffc000d46a098 t3 = fffffc0005123ce8 t4 =
0000000000000001
[ 46.582007] t5 = 0000000000004000 t6 = 0000000000000001 t7 =
fffffc0005120000
[ 46.669897] a0 = fffffc0005123cd8 a1 = fffffc0005123c08 a2 =
fffffc0000329a80
[ 46.756811] a3 = 0000000000000001 a4 = 0000000abd522fb2 a5 =
0000000000000001
[ 46.844702] t8 = 0000000000000040 t9 = fffffc0002809118 t10=
0000000000000000
[ 46.931616] t11= 000000000000b709 pv = fffffc000110c4f0 at =
0000000000000000
[ 47.019507] gp = fffffc00027e9118 sp = 00000000a59bd0eb
[ 47.082983] Disabling lock debugging due to kernel taint
[ 47.146460] Trace:
[ 47.170874] [<fffffc000110dfb4>] cgroup_attach_task+0x154/0x170
[ 47.241186] [<fffffc0001110b6c>] __cgroup_procs_write+0x14c/0x200
[ 47.314428] [<fffffc0001110c94>] cgroup_procs_write+0x24/0x50
[ 47.382788] [<fffffc0001106be4>] cgroup_file_write+0xa4/0x1a0
[ 47.452124] [<fffffc00013696b4>] kernfs_fop_write_iter+0x174/0x2d0
[ 47.525366] [<fffffc0001278914>] new_sync_write+0x104/0x1b0
[ 47.592749] [<fffffc000127b328>] vfs_write+0x2b8/0x3a0
[ 47.654272] [<fffffc00012adb3c>] __fdget_pos+0x1c/0x90
[ 47.714819] [<fffffc000127b5e4>] ksys_write+0x84/0x130
[ 47.777319] [<fffffc000101154c>] entSys+0xac/0xc0
[ 47.832983]
[ 47.850561] Code:
[ 47.850561] 00000000
[ 47.873998] 05123c08
[ 47.902319] fffffc00
[ 47.930639] 00329a80
[ 47.957983] fffffc00
[ 47.986303] 00000000
[ 48.014623] <00000000>
[ 48.042944] 05123bec
[ 48.071264]
