Bug#328209: util-vserver: Does not work on powerpc
在 2005/9/30 上午 4:03 時，Micah 寫到： This sounds like a mismatched toolchain problem. I had this same problem when I had a kernel installed that was compiled with an older version of gcc, and then installed util-vserver_0.30.208-2 which had been compiled with the newer gcc4.0. Does that means the buildd used mismatched toolchain to built the binary? Cause the binary doesn't work for me. What kernel revision are you running and what vserver patch? What gcc did you use to compile your kernel? It looks like when you recompiled util-vserver with the gcc you have installed it started to work, this says to me that there is something out of date there. The kernel version I am running is 2.6.12 which compiled by kernel- package with linux-source-2.6.12-6 and kernel-patch-vserver 2.0 from sid, and dmesg told me the version of gcc I did use to compiled is (gcc version 4.0.2 20050821 (prerelease) (Debian 4.0.1-6)). -Andrew
Bug#328209: util-vserver: Does not work on powerpc
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Andrew Lee wrote: Andrew Lee wrote: Dear Ola, Thanks for the upload. I have found util-vserver 0.30.208-2 on incoming.d.o, I will give it a try on my powerpc right now. -Andrew Very unfortunately, I tested failed with this: http://incoming.debian.org/util-vserver_0.30.208-2_powerpc.deb The vserver syscall#: changed to 273/default So made all tools in the util-vserver couldn't work, eg: vserver-stat vs_new_s_context():Funtion not implemented and even this doesn't work: showattr -d /var/lib/vservers vc_get_iattr():Function not implemented I will try to build util-vserver from source to see if I can reproduce this. This sounds like a mismatched toolchain problem. I had this same problem when I had a kernel installed that was compiled with an older version of gcc, and then installed util-vserver_0.30.208-2 which had been compiled with the newer gcc4.0. What kernel revision are you running and what vserver patch? What gcc did you use to compile your kernel? It looks like when you recompiled util-vserver with the gcc you have installed it started to work, this says to me that there is something out of date there. micah -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFDPEia9n4qXRzy1ioRAvr0AJ44o6NtKmY9aJqpixdAnx0Yg9+aPACeLHdG ISCRWwX1QPwxZT0Fvk34a8w= =GfKs -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#328209: util-vserver: Does not work on powerpc
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Dear Ola, Ola Lundqvist 提到: The error message: vc_new_s_context(): Function not implemented When runnign what command? I found the error message after I run newvserver script. And vserver vserver start reports that as well. The problem has been solved on my ibook by unapply the fix01 diff and use the fix02 diff instead. You can get the fix02 diff on http://www.13thfloor.at/vserver/s_rel26/v2.0/ - -Andrew -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) iD8DBQFDN4YonQYz4bYlCYURAjYfAJ4hh9RbGiEDfPs+J3mEdIACuhJwrwCgzrJd SRfktXDoNno3tS6jLCGcqog= =Xd1k -END PGP SIGNATURE-
Bug#328209: util-vserver: Does not work on powerpc
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Dear Ola, Thanks for the upload. I have found util-vserver 0.30.208-2 on incoming.d.o, I will give it a try on my powerpc right now. - -Andrew -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) iD8DBQFDN4banQYz4bYlCYURApaVAKCIaeBWd+UsGVlx+jTfNhsRdsJ/LwCfat3p 7EcusX7KO5gvH4krhq2hxLc= =EjO8 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#328209: util-vserver: Does not work on powerpc
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Andrew Lee wrote: Dear Ola, Thanks for the upload. I have found util-vserver 0.30.208-2 on incoming.d.o, I will give it a try on my powerpc right now. -Andrew Very unfortunately, I tested failed with this: http://incoming.debian.org/util-vserver_0.30.208-2_powerpc.deb The vserver syscall#: changed to 273/default So made all tools in the util-vserver couldn't work, eg: vserver-stat vs_new_s_context():Funtion not implemented and even this doesn't work: showattr -d /var/lib/vservers vc_get_iattr():Function not implemented I will try to build util-vserver from source to see if I can reproduce this. - -Andrew -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) iD8DBQFDN5YWnQYz4bYlCYURApFWAKDeZUesIqbivSX2L6J2VJhRozUdRQCguLWc 1a0b+G8fvgS7CrI8iG/vEs8= =jKV0 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#328209: util-vserver: Does not work on powerpc
Hello On Wed, Sep 14, 2005 at 02:44:44PM +0800, Andrew Lee wrote: Package: util-vserver Version: 0.30.208-1 Severity: important Hi Ola, I found util-vserver does not work on my ibook. The error message: vc_new_s_context(): Function not implemented When runnign what command? Regards, // Ola Running kernel is vserver2 patched: $ ls -ld /proc/virtual dr-xr-xr-x 2 root root 0 Sep 14 14:35 /proc/virtual $ dpkg -l|grep kernel-patch ii kernel-patch-vserver 2.0 context switching virtual private servers - Output of vserver-info - SYSINFO: Versions: Kernel: 2.6.12-2vs2 VS-API: ??? util-vserver: 0.30.208; Aug 18 2005, 11:17:44 Features: CC: gcc, gcc (GCC) 4.0.2 20050806 (prerelease) (Debian 4.0.1-4) CXX: g++, g++ (GCC) 4.0.2 20050806 (prerelease) (Debian 4.0.1-4) CPPFLAGS: '' CFLAGS: '-Wall -g -O2 -std=c99 -Wall -pedantic -W -funit-at-a-time' CXXFLAGS: '-g -O2 -ansi -Wall -pedantic -W -fmessage-length=0 -funit-at-a-time' build/host: powerpc-unknown-linux-gnu/powerpc-unknown-linux-gnu Use dietlibc: yes Build C++ programs: yes Build C99 programs: yes Available APIs: compat,v11,v13,fscompat,net,oldproc,olduts ext2fs Source: e2fsprogs syscall(2) invocation: alternative vserver(2) syscall#: 273/default Paths: prefix: /usr sysconf-Directory: /etc cfg-Directory: /etc/vservers initrd-Directory: $(sysconfdir)/init.d pkgstate-Directory: /var/run/vservers Kernelheaders: /usr/include vserver-Rootdir: /var/lib/vservers I have asked this issue on #vserver channel, they ask me to file this bug and told me to try the one from the 13thfloor pages with the fix02. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.12-2vs2 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages util-vserver depends on: ii iproute 20041019-3 Professional tools to control the ii libc6 2.3.5-6GNU C Library: Shared libraries an ii net-tools 1.60-15The NET-3 networking toolkit Versions of packages util-vserver recommends: ii binutils 2.16.1cvs20050902-1 The GNU assembler, linker and bina ii make 3.80-11 The GNU version of the make util -- no debconf information -- - Ola Lundqvist --- / [EMAIL PROTECTED] Annebergsslingan 37 \ | [EMAIL PROTECTED] 654 65 KARLSTAD | | +46 (0)54-10 14 30 +46 (0)70-332 1551 | | http://www.opal.dhs.org UIN/icq: 4912500 | \ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 / --- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#328209: util-vserver: Does not work on powerpc
Package: util-vserver Version: 0.30.208-1 Severity: important Hi Ola, I found util-vserver does not work on my ibook. The error message: vc_new_s_context(): Function not implemented Running kernel is vserver2 patched: $ ls -ld /proc/virtual dr-xr-xr-x 2 root root 0 Sep 14 14:35 /proc/virtual $ dpkg -l|grep kernel-patch ii kernel-patch-vserver 2.0 context switching virtual private servers - Output of vserver-info - SYSINFO: Versions: Kernel: 2.6.12-2vs2 VS-API: ??? util-vserver: 0.30.208; Aug 18 2005, 11:17:44 Features: CC: gcc, gcc (GCC) 4.0.2 20050806 (prerelease) (Debian 4.0.1-4) CXX: g++, g++ (GCC) 4.0.2 20050806 (prerelease) (Debian 4.0.1-4) CPPFLAGS: '' CFLAGS: '-Wall -g -O2 -std=c99 -Wall -pedantic -W -funit-at-a-time' CXXFLAGS: '-g -O2 -ansi -Wall -pedantic -W -fmessage-length=0 -funit-at-a-time' build/host: powerpc-unknown-linux-gnu/powerpc-unknown-linux-gnu Use dietlibc: yes Build C++ programs: yes Build C99 programs: yes Available APIs: compat,v11,v13,fscompat,net,oldproc,olduts ext2fs Source: e2fsprogs syscall(2) invocation: alternative vserver(2) syscall#: 273/default Paths: prefix: /usr sysconf-Directory: /etc cfg-Directory: /etc/vservers initrd-Directory: $(sysconfdir)/init.d pkgstate-Directory: /var/run/vservers Kernelheaders: /usr/include vserver-Rootdir: /var/lib/vservers I have asked this issue on #vserver channel, they ask me to file this bug and told me to try the one from the 13thfloor pages with the fix02. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.12-2vs2 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages util-vserver depends on: ii iproute 20041019-3 Professional tools to control the ii libc6 2.3.5-6GNU C Library: Shared libraries an ii net-tools 1.60-15The NET-3 networking toolkit Versions of packages util-vserver recommends: ii binutils 2.16.1cvs20050902-1 The GNU assembler, linker and bina ii make 3.80-11 The GNU version of the make util -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
