Bug#351115: amd64: root on lvm on scsi device doesn't work

2006-02-02 Thread Warren Turkal
On Thursday 02 February 2006 04:11 pm, Frans Pop wrote:
 The most likely cause for this is that you run the installer with kernel
 2.6.15 (daily image) but it installs 2.6.12 as 2.6.15 is not yet
 available in testing. I would guess that 2.6.12 just does not support
 your harddisk controller.

 Please try installing using a daily _businesscard_ image and boot with the
 _expert_ option. During mirror selection, select _unstable_ as the
 distribution to install.
 If I am correct, the problem on the reboot should go away.

You are correct. I guess the bug can be closed when 2.6.15 enters testing.

Thanks,
wt
-- 
Warren Turkal, Research Associate III
Colorado State University, Dept. of Atmospheric Science


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]



Bug#351115: amd64: root on lvm on scsi device doesn't work

2006-02-02 Thread Warren Turkal
Package: installation-reports

Boot method: netinst
Image version: daily for Feb 2, 2006
Date: Thu Feb  2 14:00 MST 2006

Machine: Dell Poweredge 1850
Processor: dual 3GHz Xeon EM64T
Memory: 2GB
Partitions: one lvm partition (volume group vg0);
vg0 divided into root(3G), swap(2G), var(1.5GB), and var-log(250M)

Output of lspci and lspci -n:
:00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 09)
:00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A 
(rev 09)
:00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 
09)
:00:05.0 PCI bridge: Intel Corporation E7520 PCI Express Port B1 (rev 09)
:00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 09)
:00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI 
Controller #1 (rev 02)
:00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI 
Controller #2 (rev 02)
:00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI 
Controller #3 (rev 02)
:00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 
EHCI Controller (rev 02)
:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
:00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC 
Interface Bridge (rev 02)
:00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE 
Controller (rev 02)
:01:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A 
(rev 09)
:01:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B 
(rev 09)
:03:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X 
Fusion-MPT Dual Ultra320 SCSI (rev 08)
:05:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A 
(rev 09)
:05:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B 
(rev 09)
:06:07.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet 
Controller (rev 05)
:07:08.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet 
Controller (rev 05)
:09:0d.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY 
[Radeon 7000/VE]

:00:00.0 0600: 8086:3590 (rev 09)
:00:02.0 0604: 8086:3595 (rev 09)
:00:04.0 0604: 8086:3597 (rev 09)
:00:05.0 0604: 8086:3598 (rev 09)
:00:06.0 0604: 8086:3599 (rev 09)
:00:1d.0 0c03: 8086:24d2 (rev 02)
:00:1d.1 0c03: 8086:24d4 (rev 02)
:00:1d.2 0c03: 8086:24d7 (rev 02)
:00:1d.7 0c03: 8086:24dd (rev 02)
:00:1e.0 0604: 8086:244e (rev c2)
:00:1f.0 0601: 8086:24d0 (rev 02)
:00:1f.1 0101: 8086:24db (rev 02)
:01:00.0 0604: 8086:0329 (rev 09)
:01:00.2 0604: 8086:032a (rev 09)
:03:05.0 0100: 1000:0030 (rev 08)
:05:00.0 0604: 8086:0329 (rev 09)
:05:00.2 0604: 8086:032a (rev 09)
:06:07.0 0200: 8086:1076 (rev 05)
:07:08.0 0200: 8086:1076 (rev 05)
:09:0d.0 0300: 1002:5159


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:[O]
Configure network HW:   [O]
Config network: [O]
Detect CD:  [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives:  [O]
Create file systems:[O]
Mount partitions:   [O]
Install base system:[O]
Install boot loader:[O]
Reboot: [E]

Comments/Problems:
On reboot, the system claims that device mapper cannot find the vg0 volume
group. Then, it says that it can't pivot-root. Finally, it panics saying that it
attempted to kill init.

wt
-- 
Warren Turkal, Research Associate III
Colorado State University, Dept. of Atmospheric Science


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]



Bug#351115: amd64: root on lvm on scsi device doesn't work

2006-02-02 Thread Warren Turkal
I tried it without LVM. The same thing happened with not being able to 
pivot-root and trying to kill init.

wt
-- 
Warren Turkal, Research Associate III
Colorado State University, Dept. of Atmospheric Science


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]



Bug#351115: amd64: root on lvm on scsi device doesn't work

2006-02-02 Thread Frans Pop
On Thursday 02 February 2006 23:42, Warren Turkal wrote:
 I tried it without LVM. The same thing happened with not being able to
 pivot-root and trying to kill init.

The most likely cause for this is that you run the installer with kernel 
2.6.15 (daily image) but it installs 2.6.12 as 2.6.15 is not yet 
available in testing. I would guess that 2.6.12 just does not support 
your harddisk controller.

Please try installing using a daily _businesscard_ image and boot with the 
_expert_ option. During mirror selection, select _unstable_ as the 
distribution to install.
If I am correct, the problem on the reboot should go away.

Cheers,
FJP


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]