Package: installation-reports
Boot method: Netinst CD
Image version: Beta1
Date: Thu Feb 21 00:00:00 CET 2006
Machine: Dell Inspiron 9400
Processor: Intel® CoreTM Duo Processor 1.66 GHz
Memory: 1GB
Partitions:
# fdisk -l /dev/sda
Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1243219535008+ b W95 FAT32
/dev/sda22433 1191576172197+ 83 Linux
/dev/sda3 11916 12037 979965 82 Linux swap / Solaris
/dev/sda4 * 12038 12161 996030 83 Linux
# df -Tl
FilesystemType 1K-blocks Used Available Use% Mounted on
/dev/sda2 reiserfs76169828 1353224 74816604 2% /
/dev/sda4 ext3 933393 23261860331 3% /boot
tmpfstmpfs 517688 0517688 0% /dev/shm
Output of lspci and lspci -n:
:00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML
and 945GT
Express Memory Controller Hub (rev 03)
:00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML
and 945GT
Express PCI Express Root Port (rev 03)
:00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definitio
n Audio Controller (rev 01)
:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port
1 (rev 01)
:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port
2 (rev 01)
:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port
4 (rev 01)
:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #1
(rev 01)
:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #2
(rev 01)
:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #3
(rev 01)
:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #4
(rev 01)
:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Co
ntroller (rev 01)
:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC
Interface Bridg
e (rev 01)
:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family)
Serial
ATA Storage Controller IDE (rev 01)
:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus
Controller (rev
01)
:01:00.0 VGA compatible controller: nVidia Corporation: Unknown
device 0098
(rev a1)
:03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0
100Base-TX (re
v 02)
:03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd: Unknown device 0832
:03:01.1 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
(rev 19
)
:03:01.2 System peripheral: Ricoh Co Ltd: Unknown device 0843 (rev 01)
:03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus
Host Adapte
r (rev 0a)
:03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller
(rev 05)
:0c:00.0 Network controller: Intel Corporation: Unknown device 4222
(rev 02)
:00:00.0 0600: 8086:27a0 (rev 03)
:00:01.0 0604: 8086:27a1 (rev 03)
:00:1b.0 0403: 8086:27d8 (rev 01)
:00:1c.0 0604: 8086:27d0 (rev 01)
:00:1c.1 0604: 8086:27d2 (rev 01)
:00:1c.3 0604: 8086:27d6 (rev 01)
:00:1d.0 0c03: 8086:27c8 (rev 01)
:00:1d.1 0c03: 8086:27c9 (rev 01)
:00:1d.2 0c03: 8086:27ca (rev 01)
:00:1d.3 0c03: 8086:27cb (rev 01)
:00:1d.7 0c03: 8086:27cc (rev 01)
:00:1e.0 0604: 8086:2448 (rev e1)
:00:1f.0 0601: 8086:27b9 (rev 01)
:00:1f.2 0101: 8086:27c4 (rev 01)
:00:1f.3 0c05: 8086:27da (rev 01)
:01:00.0 0300: 10de:0098 (rev a1)
:03:00.0 0200: 14e4:170c (rev 02)
:03:01.0 0c00: 1180:0832
:03:01.1 0805: 1180:0822 (rev 19)
:03:01.2 0880: 1180:0843 (rev 01)
:03:01.3 0880: 1180:0592 (rev 0a)
:03:01.4 0880: 1180:0852 (rev 05)
:0c:00.0 0280: 8086:4222 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked:[O]
Configure network HW: [O]
Config network: [O]
Detect CD: [E]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [O]
Create file systems:[O]
Mount partitions: [O]
Install base system:[O]
Install boot loader:[O]
Reboot: [O]
Comments/Problems:
After booting on the netinst cd, it failed to detect the Hard Drive. To
get it to work, I had to load these modules: ata_piix libata sd_mod
Then the base system installed without incident. After a reboot, the CD
drive was not detected. I have not yet gotten it to be detected at all.
What I did was (before reboot):
Alt-F2 + Enter to activate second console:
mkdir /target/mirror
cd /cdrom
cp -a dists/ pool/ /target/mirror
(after reboot)
select /mirror as file: element for apt config
The Intel Wireless 3945 card
