Hi John,
I've just seem your bug report and thought I'd add something to try to be
helpful.
I have managed to get debian etch installing on a Mini ITX MII 1000 & 1200
with no problems (with 80GB HDD). The installation method I'm using is a usb
stick boot with a preseed file (which was very tricky to configure due to
the 'sensitivity' of the debian-installer processes incidentally).
I sourced my files from here
http://people.debian.org/~joeyh/d-i/images/daily/hd-media/ but because they
are rebuilt frequently I can't garauntee they'll work. I also use the etch
net install cd iso. I've also attached my syslinux.cfg and
preseed.cfgfiles so that you can see how I've done it (ps. delete any
run or late
commands as they are specific to my installation). This may or may not be
helpful but at least now you know someone is working on a similar board!!
Good Luck.
Regards,
Andrew
On 05/03/07, John Winters <[EMAIL PROTECTED]> wrote:
Package: installation-reports
Severity: important
I've been trying a number of times to install Etch on a Mini-ITX based,
EPIA 800 system. This box has been running for some time as a diskless
workstation running Sarge. I've now put a HDD in it and am trying to
install Etch using the network boot method.
The installation appears to run flawlessly, right up to the point where
the system tries to boot the new installation. Then it gets as far
as the second line of the boot ("Uncompressing kernel") and re-boots.
I got slightly further when I used the rc1 installer. Then it would
get to "Waiting for /dev to be populated" before re-booting.
Unfortunately, because it fails so early in the boot process it is
difficult if not impossible to gain any more diagnostic information.
If I switch the box back to network booting and tell it to boot Sarge
rather than the Etch installer then it still works perfectly happily and
is 100% stable.
-- Package-specific info:
Boot method: network
Image version: Daily build 20070215
Date:
Machine: Mini-ITX EPIA 800
Partitions:
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [ ]
Detect network card:[ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system:[ ]
Clock/timezone setup: [ ]
User/password setup:[ ]
Install tasks: [ ]
Install boot loader:[ ]
Overall install:[E]
Comments/Problems:
I worried that the problem might be the 486 kernel which the installer
installs by default, so I built a replacement kernel with all the same
settings but changed to a C3 processor. This made no difference.
I have deleted all the auto-gathered system information which was
added below because it relates to the system on which I am typing this,
rather than the one I am installing. As I can't boot that system I
can't use it to submit this report.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
syslinux.cfg
Description: Binary data
preseed.cfg
Description: Binary data
