Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Hi, I asked our Gnome guys. The reply is below: Yes, the GNOME session does indeed some RandR setup based on the configured display properties, but only if the user has set them in gnome-display-properties. I think it only tries to change the resolution and refresh rate of the screen, and it doesn’t get the data through RandR 1.2. hmm.. To delete this configuration, you can run: gconftool --recursive-unset /desktop/gnome/screen Thanks! regards, junichi -- [EMAIL PROTECTED],netfort.gr.jp} Debian Project
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Alex Deucher wrote: My monitor is connected to DVI-0, and a projector (which is currently turned off) is connected to VGA-0. The remaining problem was that with GDM I can see the display, but after logging into GNOME when ConnectorCable is not set, display goes blank; and I think I now understand why. I extract the most interesting part of the log. My theory is that the GNOME session tries to reconfigure xrandr such that it outputs to Port 0, which is 'DVI-0' when ConnectorCable is set, and 'VGA-0' when it's not set, and because xrandr doesn't quite know when VGA-0 is connected or not, GNOME is able to set VGA-0 as the only output. Not quite sure if this is fixable gnome session seems to save arbitrary xrandr setups and I'm not sure how or when it does it. I think there is a file you can delete that will leave the xserver as configured at start up. Perhaps Brice knows? I asked our Gnome guys. The reply is below: Yes, the GNOME session does indeed some RandR setup based on the configured display properties, but only if the user has set them in gnome-display-properties. I think it only tries to change the resolution and refresh rate of the screen, and it doesn’t get the data through RandR 1.2. To delete this configuration, you can run: gconftool --recursive-unset /desktop/gnome/screen Brice
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
On Dec 27, 2007 6:20 PM, Junichi Uekawa [EMAIL PROTECTED] wrote: Hi, The minimal configuration option I needed to add was 'ConnectorTable'. What happens if you don't pass this option? Do you have the corresponding log? Note that even if 6.7.197 is in unstable now, I try to keep uploading newer upstream snapshots into experimental once a week or so (there are still of lots of improvements being made by the devs). (II) RADEON(0): Output DVI-0 using initial mode 1280x768 which I don't quite understand why. What monitor(s) do you have attached to which output(s)? What does xrandr report? It could just be that your monitor report this 1280x768 as a preferred mode. This was fixed when I booted my machine this morning. I guess this was interim problem due to me doing partial upgrades; after a full dist-upgrade problem doesn't seem to happen. $ xrandr Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1600 x 1200 DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 60.0 1600x1200 59.9 1400x1050 60.0 1280x1024 59.9* 800x60060.3 56.2 640x48060.0 VGA-0 unknown connection (normal left inverted right x axis y axis) 1280x800 60.0 1280x768 60.0 1024x768 60.0 800x60060.3 640x48059.9 That looks more reasonable. My monitor is connected to DVI-0, and a projector (which is currently turned off) is connected to VGA-0. The remaining problem was that with GDM I can see the display, but after logging into GNOME when ConnectorCable is not set, display goes blank; and I think I now understand why. I extract the most interesting part of the log. My theory is that the GNOME session tries to reconfigure xrandr such that it outputs to Port 0, which is 'DVI-0' when ConnectorCable is set, and 'VGA-0' when it's not set, and because xrandr doesn't quite know when VGA-0 is connected or not, GNOME is able to set VGA-0 as the only output. Not quite sure if this is fixable. gnome session seems to save arbitrary xrandr setups and I'm not sure how or when it does it. I think there is a file you can delete that will leave the xserver as configured at start up. Perhaps Brice knows? Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Junichi Uekawa wrote: The minimal configuration option I needed to add was 'ConnectorTable'. What happens if you don't pass this option? Do you have the corresponding log? Note that even if 6.7.197 is in unstable now, I try to keep uploading newer upstream snapshots into experimental once a week or so (there are still of lots of improvements being made by the devs). (II) RADEON(0): Output DVI-0 using initial mode 1280x768 which I don't quite understand why. What monitor(s) do you have attached to which output(s)? What does xrandr report? It could just be that your monitor report this 1280x768 as a preferred mode. You can override this default mode using ModeLine and PreferredMode in the corresponding Monitor section in xorg.conf, see section III and especially III.5 of http://wiki.debian.org/XStrikeForce/HowToRandR12 Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Hi, The minimal configuration option I needed to add was 'ConnectorTable'. What happens if you don't pass this option? Do you have the corresponding log? Note that even if 6.7.197 is in unstable now, I try to keep uploading newer upstream snapshots into experimental once a week or so (there are still of lots of improvements being made by the devs). (II) RADEON(0): Output DVI-0 using initial mode 1280x768 which I don't quite understand why. What monitor(s) do you have attached to which output(s)? What does xrandr report? It could just be that your monitor report this 1280x768 as a preferred mode. This was fixed when I booted my machine this morning. I guess this was interim problem due to me doing partial upgrades; after a full dist-upgrade problem doesn't seem to happen. $ xrandr Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1600 x 1200 DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 60.0 1600x1200 59.9 1400x1050 60.0 1280x1024 59.9* 800x60060.3 56.2 640x48060.0 VGA-0 unknown connection (normal left inverted right x axis y axis) 1280x800 60.0 1280x768 60.0 1024x768 60.0 800x60060.3 640x48059.9 My monitor is connected to DVI-0, and a projector (which is currently turned off) is connected to VGA-0. The remaining problem was that with GDM I can see the display, but after logging into GNOME when ConnectorCable is not set, display goes blank; and I think I now understand why. I extract the most interesting part of the log. My theory is that the GNOME session tries to reconfigure xrandr such that it outputs to Port 0, which is 'DVI-0' when ConnectorCable is set, and 'VGA-0' when it's not set, and because xrandr doesn't quite know when VGA-0 is connected or not, GNOME is able to set VGA-0 as the only output. Not quite sure if this is fixable. @@ -551,24 +548,24 @@ (II) RADEON(0): Bios Connector table: (II) RADEON(0): Port0: DDCType-1, DACType-0, TMDSType-0, ConnectorType-2 (II) RADEON(0): Port1: DDCType-1, DACType-2, TMDSType-1, ConnectorType-4 -(II) RADEON(0): Output DVI-0 using monitor section Generic Monitor +(II) RADEON(0): Output VGA-0 using monitor section Generic Monitor (II) RADEON(0): I2C bus MONID initialized. +(II) RADEON(0): Output DVI-0 has no monitor section (WW) RADEON(0): No External TMDS Table found (II) RADEON(0): I2C bus DVO initialized. (II) RADEON(0): I2C device DVO:RADEON DVO Controller registered at address 0x70. -(II) RADEON(0): Output VGA-0 has no monitor section (II) RADEON(0): Port0: Monitor -- AUTO + Connector -- VGA + DAC Type -- TVDAC/ExtDAC + TMDS Type -- None + DDC Type -- MONID +(II) RADEON(0): Port1: + Monitor -- AUTO Connector -- DVI-D DAC Type -- None TMDS Type -- External DDC Type -- MONID -(II) RADEON(0): Port1: - Monitor -- AUTO - Connector -- VGA - DAC Type -- TVDAC/ExtDAC - TMDS Type -- None - DDC Type -- None (II) RADEON(0): I2C device MONID:ddc2 registered at address 0xA0. (II) RADEON(0): EDID vendor HWP, prod id 9989 (II) RADEON(0): Using hsync ranges from config file --- 1/xorg.conf 2007-12-28 07:43:14.0 +0900 +++ 2/xorg.conf 2007-12-28 07:46:12.0 +0900 @@ -45,7 +45,7 @@ #Option DRI false BusID PCI:1:5:0 #Option Monitor-DVI-0 Generic Monitor - Option ConnectorTable 1,2,1,4,0,1,2,2 + #Option ConnectorTable 1,2,1,4,0,1,2,2 #Option DefaultConnectorTable true #Option ReverseDDC true EndSection regards, junichi -- [EMAIL PROTECTED],netfort.gr.jp} Debian Project logs.tar.gz Description: Binary data
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
On Sun, Nov 18, 2007 at 04:59:31PM +0100, Brice Goglin wrote: On Wed, Oct 10, 2007 at 09:14:40AM +0900, Junichi Uekawa wrote: I've re-tried with latest driver version, to make sure it doesn't work dpkg -l |grep video-ati ii xserver-xorg-video-ati 1:6.7.195-1 X.Org X server -- ATI display driver ii xserver-xorg-video-ati-dbg 1:6.7.195-1 X.Org X server -- ATI display driver (debugging symbols) Hi Junichi, Still the same problem with 6.7.196? Thanks, Brice Ping? We have 6.7.197 in unstable now. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
On Wed, Oct 10, 2007 at 09:14:40AM +0900, Junichi Uekawa wrote: I've re-tried with latest driver version, to make sure it doesn't work dpkg -l |grep video-ati ii xserver-xorg-video-ati 1:6.7.195-1 X.Org X server -- ATI display driver ii xserver-xorg-video-ati-dbg 1:6.7.195-1 X.Org X server -- ATI display driver (debugging symbols) Hi Junichi, Still the same problem with 6.7.196? Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
On 10/7/07, Junichi Uekawa [EMAIL PROTECTED] wrote: Hi, This is a desktop PC, hp dx5150MT. It has DVI-out and D-sub analogue output; which DVI is connected to the display. The connector table in your bios seems to be either broken or in some currently unsupported format. The following option should get things working for you: Option ConnectorTable X,2,1,4,Y,1,2,2 where X and Y numbers between 1 and 5 and are not equal. X and Y specify the ddc lines for each connector, so if you want to get an edid from your monitor, you'll need to figure out what line the connector uses. I tried all possible cases with for A in 1 2 3 4 5; do for B in 1 2 3 4 5; do sed s/ConnectorTable\ .*/ConnectorTable\ \$A,2,1,4,$B,1,2,2\/ /etc/X11/xorg.conf-template20071008 /etc/X11/xorg.conf ; X; cp /var/log/Xorg.0.log Xorg.log.$A.$B; done ; done and they all faied to start. I don't quite understand what this ConnectorTable option should do and I don't quite understand what is really wrong with this setup. For whatever reason DDC tends to be unreliable on XPRESS chips.I think it may be a clock issue. Without DDC, the server is not able to find any modes for the output. you'll have to add a monitor section and link it with the output in question. see this page for more: http://www.intellinuxgraphics.org/dualhead.html then add modelines for your monitor something like: Section Device Identifier ATI Technologies Inc RS480 [Radeon Xpress 200G Series] Driver radeon Option DRI false BusID PCI:1:5:0 #Option Monitor-LVDS Generic Monitor Option ConnectorTable 5,2,1,4,5,1,2,2 Option monitor-DVI-0 Generic Monitor EndSection Section Monitor Identifier Generic Monitor Option DPMS Option Enable TRUE HorizSync 30-100 VertRefresh 50-61 Modeline 1280x1024 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync EndSection Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
I've re-tried with latest driver version, to make sure it doesn't work dpkg -l |grep video-ati ii xserver-xorg-video-ati 1:6.7.195-1 X.Org X server -- ATI display driver ii xserver-xorg-video-ati-dbg 1:6.7.195-1 X.Org X server -- ATI display driver (debugging symbols) ===File /var/log/Xorg.0.log= X.Org X Server 1.4.0 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4-2) Current Operating System: Linux dancer64 2.6.23-rc8dancer #1 PREEMPT Mon Oct 8 11:29:36 JST 2007 x86_64 Build Date: 16 September 2007 09:38:48PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Wed Oct 10 09:12:25 2007 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Generic Monitor (**) | |--Device ATI Technologies Inc RS480 [Radeon Xpress 200G Series] (**) |--Input Device Generic Keyboard (**) |--Input Device Configured Mouse (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (WW) The directory /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi (==) RgbPath set to /etc/X11/rgb (==) ModulePath set to /usr/lib/xorg/modules (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x7b1180 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: pcidata (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 1.4.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,5950 card 103c,3009 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,5a3f card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:05:0: chip 1002,5a37 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:12:0: chip 1002,4379 card 103c,3009 rev 00 class 01,01,8f hdr 00 (II) PCI: 00:13:0: chip 1002,4374 card 103c,3009 rev 00 class 0c,03,10 hdr 80 (II) PCI: 00:13:1: chip 1002,4375 card 103c,3009 rev 00 class 0c,03,10 hdr 00 (II) PCI: 00:13:2: chip 1002,4373 card 103c,3009 rev 00 class 0c,03,20 hdr 00 (II) PCI: 00:14:0: chip 1002,4372 card 103c,3009 rev 10 class 0c,05,00 hdr 80 (II) PCI: 00:14:1: chip 1002,4376 card 103c,3009 rev 00 class 01,01,82 hdr 00 (II) PCI: 00:14:3: chip 1002,4377 card 103c,3009 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:14:4: chip 1002,4371 card , rev 00 class 06,04,01 hdr 81 (II) PCI: 00:14:5: chip 1002,4370 card 103c,3009 rev 01 class 04,01,00 hdr 80 (II) PCI: 00:18:0: chip 1022,1100 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 01:05:0: chip 1002,5954 card 103c,3009 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:05:1: chip 1002,5854 card 103c,3008 rev 00 class 03,80,00 hdr 00 (II) PCI: 02:00:0: chip 14e4,1677 card 103c,3009 rev 20 class 02,00,00 hdr 00 (II) PCI: 03:0a:0: chip 8086,107c card 8086,1376 rev 05 class 02,00,00 hdr 00 (II) PCI: 03:0b:0: chip 109e,036e card 10fc,d018 rev 11 class 04,00,00 hdr 80 (II) PCI: 03:0b:1: chip 109e,0878 card 10fc,d018 rev 11 class 04,80,00 hdr 80 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x1) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x1) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
On 10/9/07, Junichi Uekawa [EMAIL PROTECTED] wrote: I've re-tried with latest driver version, to make sure it doesn't work dpkg -l |grep video-ati ii xserver-xorg-video-ati 1:6.7.195-1 X.Org X server -- ATI display driver ii xserver-xorg-video-ati-dbg 1:6.7.195-1 X.Org X server -- ATI display driver (debugging symbols) please try again with the connectortable option and monitor changes I suggested. your log shows that you are using the bios tables rather than the connector table specified in the config. Thanks, Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Do you have ssh access from another machine? If so, 'DISPLAY=:0 xrandr ...' should work (with 6.7.19x at least). Also the log should tell you which modes are available and which one is chosen by default. You can force another one with PreferredMode, see http://bgoglin.livejournal.com/10423.html I've found some time to track this problem down. This is the version from experimental. ii xserver-xorg-video-ati 1:6.7.192-4 X.Org X server -- ATI display driver ssh from remote host gives: [12:03:42]dancer64:~ xrandr -d :0 -q Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 2560 x 1200 VGA-0 disconnected (normal left inverted right x axis y axis) LVDS connected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x1024 60.0*+ 1280x960 60.0 1280x854 60.0 1280x800 60.0 60.0 1280x768 60.0 60.0 1200x800 60.0 1024x768 60.0 60.0 800x60060.0 60.3 640x48060.0 59.9 None disconnected (normal left inverted right x axis y axis) ===File /var/log/Xorg.0.log= X.Org X Server 1.4.0 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4-2) Current Operating System: Linux dancer64 2.6.23-rc8dancer #1 PREEMPT Mon Oct 1 08:21:11 JST 2007 x86_64 Build Date: 16 September 2007 09:38:48PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Mon Oct 8 11:54:14 2007 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Generic Monitor (**) | |--Device ATI Technologies Inc RS480 [Radeon Xpress 200G Series] (**) |--Input Device Generic Keyboard (**) |--Input Device Configured Mouse (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (WW) The directory /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi (==) RgbPath set to /etc/X11/rgb (==) ModulePath set to /usr/lib/xorg/modules (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x7b1180 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: pcidata (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 1.4.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,5950 card 103c,3009 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,5a3f card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:05:0: chip 1002,5a37 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:12:0: chip 1002,4379 card 103c,3009 rev 00 class 01,01,8f hdr 00 (II) PCI: 00:13:0: chip 1002,4374 card 103c,3009 rev 00 class 0c,03,10 hdr 80 (II) PCI: 00:13:1: chip 1002,4375 card 103c,3009 rev 00 class 0c,03,10 hdr 00 (II) PCI: 00:13:2: chip 1002,4373 card 103c,3009 rev 00 class 0c,03,20 hdr 00 (II) PCI: 00:14:0: chip 1002,4372 card 103c,3009 rev 10 class 0c,05,00 hdr 80 (II) PCI: 00:14:1: chip 1002,4376 card 103c,3009 rev 00 class 01,01,82 hdr 00 (II) PCI: 00:14:3: chip 1002,4377 card 103c,3009 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:14:4: chip 1002,4371 card , rev 00 class 06,04,01 hdr 81 (II) PCI: 00:14:5: chip 1002,4370 card 103c,3009 rev 01 class 04,01,00 hdr 80 (II) PCI: 00:18:0: chip 1022,1100 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 01:05:0: chip 1002,5954 card 103c,3009 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:05:1: chip 1002,5854 card 103c,3008 rev 00 class 03,80,00 hdr 00 (II) PCI: 02:00:0: chip 14e4,1677 card 103c,3009 rev 20 class
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Hi, This is a desktop PC, hp dx5150MT. It has DVI-out and D-sub analogue output; which DVI is connected to the display. The connector table in your bios seems to be either broken or in some currently unsupported format. The following option should get things working for you: Option ConnectorTable X,2,1,4,Y,1,2,2 where X and Y numbers between 1 and 5 and are not equal. X and Y specify the ddc lines for each connector, so if you want to get an edid from your monitor, you'll need to figure out what line the connector uses. I tried all possible cases with for A in 1 2 3 4 5; do for B in 1 2 3 4 5; do sed s/ConnectorTable\ .*/ConnectorTable\ \$A,2,1,4,$B,1,2,2\/ /etc/X11/xorg.conf-template20071008 /etc/X11/xorg.conf ; X; cp /var/log/Xorg.0.log Xorg.log.$A.$B; done ; done and they all faied to start. I don't quite understand what this ConnectorTable option should do and I don't quite understand what is really wrong with this setup. regards, junichi -- [EMAIL PROTECTED],netfort.gr.jp} Debian Project Xorg.log.tar.gz Description: Binary data xorg.conf Description: Binary data
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Hello, Did this bug has been resolved ? Because I have the same problem : I have a Radeon XPRESS 200M Integraded video card, and since a few weeks, I can't use the ati and radeon xorg drivers with __recent kernels__. It doesn't work with linux-image-2.6.22* whereas it works with linux-image-2.6.18* (Debian kernels). Hope it can help, -- Eric BEGOT [EMAIL PROTECTED] ___ Yahoo! Mail réinvente le mail ! Découvrez le nouveau Yahoo! Mail et son interface révolutionnaire. http://fr.mail.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Eric BEGOT wrote: Did this bug has been resolved ? Probably not, DRI support for Xpress 200 seems to miss too much specifications to get fixed so far. Because I have the same problem : I have a Radeon XPRESS 200M Integraded video card, and since a few weeks, I can't use the ati and radeon xorg drivers with __recent kernels__. Try disabling DRI. Option DRI off in section Device of xorg.conf should do the trick. It doesn't work with linux-image-2.6.22* whereas it works with linux-image-2.6.18* (Debian kernels). 2.6.22 contains some support for DRI for Xpress chips, while 2.6.18 did not. So the X server might try to enable DRI on 2.6.22. If this DRI is actually not well supported, enabling it might break things... Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
On 9/28/07, Junichi Uekawa [EMAIL PROTECTED] wrote: Hi, I've tried unstable and experimental versions, but the display goes to sleep after starting up X, and I see nothing. I can enter username / password in what is probably a gdm login screen, and I can hear disk activity, so I assume it starts and it thinks it's running. Is this a laptop? What outputs does it actually have and which are in use? It looks like it has a bogus connector table, or some sort of weird connector. As such the driver is probably lighting up the wrong output. This is a desktop PC, hp dx5150MT. It has DVI-out and D-sub analogue output; which DVI is connected to the display. It's most likely an external DVI chip, so maybe Alex can quirk it if you figure out the correct connector table. Dave. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
On Fri, 2007-09-28 at 08:29 +0900, Junichi Uekawa wrote: Does it help if you disable DRI? Option DRI off in the Device section should do the trick. Do you have ssh access from another machine? If so, 'DISPLAY=:0 xrandr ...' should work (with 6.7.19x at least). Hmmm.. how do I get through authentication? It should 'just work' when you're logged in. If it doesn't, try stopping the display manager and running something like xinit $(which xrandr) from ssh. -- Earthling Michel Dänzer | http://tungstengraphics.com Libre software enthusiast | Debian, X and DRI developer
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Junichi Uekawa wrote: Does it help if you disable DRI? Option DRI off in the Device section should do the trick. Actually no. I am suspecting more of it trying to output to something weird. How can I run xrandr to debug this problem when I can't see the display? Do you have ssh access from another machine? If so, 'DISPLAY=:0 xrandr ...' should work (with 6.7.19x at least). Also the log should tell you which modes are available and which one is chosen by default. You can force another one with PreferredMode, see http://bgoglin.livejournal.com/10423.html By the way, 6.7.192-4 is old, there's 6.7.194-1 now :) Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
On 9/26/07, Junichi Uekawa [EMAIL PROTECTED] wrote: Package: xserver-xorg-video-ati Version: 1:6.7.192-4 Severity: normal Hi, I've tried unstable and experimental versions, but the display goes to sleep after starting up X, and I see nothing. I can enter username / password in what is probably a gdm login screen, and I can hear disk activity, so I assume it starts and it thinks it's running. Is this a laptop? What outputs does it actually have and which are in use? It looks like it has a bogus connector table, or some sort of weird connector. As such the driver is probably lighting up the wrong output. Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Hi, I've tried unstable and experimental versions, but the display goes to sleep after starting up X, and I see nothing. I can enter username / password in what is probably a gdm login screen, and I can hear disk activity, so I assume it starts and it thinks it's running. Is this a laptop? What outputs does it actually have and which are in use? It looks like it has a bogus connector table, or some sort of weird connector. As such the driver is probably lighting up the wrong output. This is a desktop PC, hp dx5150MT. It has DVI-out and D-sub analogue output; which DVI is connected to the display. regards, junichi -- [EMAIL PROTECTED],netfort.gr.jp} Debian Project -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Hi, I've tried unstable and experimental versions, but the display goes to sleep after starting up X, and I see nothing. I can enter username / password in what is probably a gdm login screen, and I can hear disk activity, so I assume it starts and it thinks it's running. Is this a laptop? What outputs does it actually have and which are in use? It looks like it has a bogus connector table, or some sort of weird connector. As such the driver is probably lighting up the wrong output. This is a desktop PC, hp dx5150MT. It has DVI-out and D-sub analogue output; which DVI is connected to the display. regards, junichi -- [EMAIL PROTECTED],netfort.gr.jp} Debian Project -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Hi, Does it help if you disable DRI? Option DRI off in the Device section should do the trick. Do you have ssh access from another machine? If so, 'DISPLAY=:0 xrandr ...' should work (with 6.7.19x at least). Hmmm.. how do I get through authentication? Also the log should tell you which modes are available and which one is chosen by default. You can force another one with PreferredMode, see http://bgoglin.livejournal.com/10423.html By the way, 6.7.192-4 is old, there's 6.7.194-1 now :) Good, I'll try that. regards, junichi -- [EMAIL PROTECTED],netfort.gr.jp} Debian Project -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
On 9/27/07, Junichi Uekawa [EMAIL PROTECTED] wrote: Hi, I've tried unstable and experimental versions, but the display goes to sleep after starting up X, and I see nothing. I can enter username / password in what is probably a gdm login screen, and I can hear disk activity, so I assume it starts and it thinks it's running. Is this a laptop? What outputs does it actually have and which are in use? It looks like it has a bogus connector table, or some sort of weird connector. As such the driver is probably lighting up the wrong output. This is a desktop PC, hp dx5150MT. It has DVI-out and D-sub analogue output; which DVI is connected to the display. The connector table in your bios seems to be either broken or in some currently unsupported format. The following option should get things working for you: Option ConnectorTable X,2,1,4,Y,1,2,2 where X and Y numbers between 1 and 5 and are not equal. X and Y specify the ddc lines for each connector, so if you want to get an edid from your monitor, you'll need to figure out what line the connector uses. Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Package: xserver-xorg-video-ati Version: 1:6.7.192-4 Severity: normal Hi, I've tried unstable and experimental versions, but the display goes to sleep after starting up X, and I see nothing. I can enter username / password in what is probably a gdm login screen, and I can hear disk activity, so I assume it starts and it thinks it's running. I can workaround by using vesa driver, so hardware seems to be functional. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.23-rc5dancer (PREEMPT) Locale: LANG=ja_JP.EUC-JP, LC_CTYPE=ja_JP.EUC-JP (charmap=EUC-JP) Shell: /bin/sh linked to /bin/bash Versions of packages xserver-xorg-video-ati depends on: ii libc6 2.6.1-5GNU C Library: Shared libraries ii xserver-xorg-core 2:1.4-2X.Org X server -- core server xserver-xorg-video-ati recommends no packages. -- no debconf information ===File /var/log/Xorg.0.log= X.Org X Server 1.4.0 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4-2) Current Operating System: Linux dancer64 2.6.23-rc5dancer #1 PREEMPT Mon Sep 3 19:55:37 JST 2007 x86_64 Build Date: 16 September 2007 09:38:48PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Thu Sep 27 07:09:23 2007 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Generic Monitor (**) | |--Device ATI Technologies Inc RS480 [Radeon Xpress 200G Series] (**) |--Input Device Generic Keyboard (**) |--Input Device Configured Mouse (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (WW) The directory /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi (==) RgbPath set to /etc/X11/rgb (==) ModulePath set to /usr/lib/xorg/modules (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x7b1180 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: pcidata (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 1.4.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,5950 card 103c,3009 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,5a3f card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:05:0: chip 1002,5a37 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:12:0: chip 1002,4379 card 103c,3009 rev 00 class 01,01,8f hdr 00 (II) PCI: 00:13:0: chip 1002,4374 card 103c,3009 rev 00 class 0c,03,10 hdr 80 (II) PCI: 00:13:1: chip 1002,4375 card 103c,3009 rev 00 class 0c,03,10 hdr 00 (II) PCI: 00:13:2: chip 1002,4373 card 103c,3009 rev 00 class 0c,03,20 hdr 00 (II) PCI: 00:14:0: chip 1002,4372 card 103c,3009 rev 10 class 0c,05,00 hdr 80 (II) PCI: 00:14:1: chip 1002,4376 card 103c,3009 rev 00 class 01,01,82 hdr 00 (II) PCI: 00:14:3: chip 1002,4377 card 103c,3009 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:14:4: chip 1002,4371 card , rev 00 class 06,04,01 hdr 81 (II) PCI: 00:14:5: chip 1002,4370 card 103c,3009 rev 01 class 04,01,00 hdr 80 (II) PCI: 00:18:0: chip 1022,1100 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card , rev 00 class 06,00,00 hdr 80 (II) PCI: 01:05:0: chip 1002,5954 card 103c,3009 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:05:1: chip 1002,5854 card 103c,3008 rev 00 class 03,80,00 hdr 00 (II) PCI: 02:00:0: chip 14e4,1677 card 103c,3009 rev 20 class 02,00,00 hdr 00 (II) PCI: 03:0a:0: chip 8086,107c card 8086,1376 rev 05 class 02,00,00 hdr 00 (II) PCI: 03:0b:0: chip
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Junichi Uekawa wrote: Package: xserver-xorg-video-ati Version: 1:6.7.192-4 Severity: normal Hi, I've tried unstable and experimental versions, but the display goes to sleep after starting up X, and I see nothing. I can enter username / password in what is probably a gdm login screen, and I can hear disk activity, so I assume it starts and it thinks it's running. Does it help if you disable DRI? Option DRI off in the Device section should do the trick. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444223: xserver-xorg-video-ati: RS480 (radeon express X200G series): display goes to sleep after upgrade to latest unstable/sid
Hi, I've tried unstable and experimental versions, but the display goes to sleep after starting up X, and I see nothing. I can enter username / password in what is probably a gdm login screen, and I can hear disk activity, so I assume it starts and it thinks it's running. Does it help if you disable DRI? Option DRI off in the Device section should do the trick. Actually no. I am suspecting more of it trying to output to something weird. How can I run xrandr to debug this problem when I can't see the display? regards, junichi -- [EMAIL PROTECTED],netfort.gr.jp} Debian Project -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
