Bug#595733: #595733 [sparc] sym53c8xx is not autodetected

2011-01-17 Thread Hermann Lauer 
Hello,

On Sun, Jan 16, 2011 at 08:47:40PM +, Miguel Figueiredo wrote:
 Hi,
 
 sym53c8xx is included in the linux-kernel-di-sparc-2.6 so i guess it
 should be detected.
 Can you try with a recent image and give feedback?

You are right, it is detected now (9699532 2010-12-15 17:09 boot_beta2.img).
But a symbol is missing, so sd_mod did not load - see below.

Will look if a new image is available when I have time.

Thanks for caring,
  Hermann

[  513.598487] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
[  513.607166] sym0: SCSI BUS has been reset.
[  513.607219] scsi0 : sym-2.2.3
[  513.608484] PCI: Enabling device: (:00:02.0), cmd 3
[  513.609777] sym1: 875 rev 0x3 at pci :00:02.0 irq 14
[  513.697036] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
[  513.705291] sym1: SCSI BUS has been reset.
[  513.705349] scsi1 : sym-2.2.3
[  515.90] end_request: I/O error, dev fd0, sector 0
[  516.001766] end_request: I/O error, dev fd0, sector 0
[  516.627299] scsi 0:0:0:0: Direct-Access SEAGATE  ST39173WC5764 
PQ: 0 ANSI: 2
[  516.627339] scsi target0:0:0: tagged command queuing enabled, command queue 
depth 16.
[  516.627374] scsi target0:0:0: Beginning Domain Validation
[  516.638761] scsi target0:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 
15)
[  516.644044] scsi target0:0:0: Domain Validation skipping write tests
[  516.644064] scsi target0:0:0: Ending Domain Validation
[  516.650368] scsi 0:0:1:0: Direct-Access SEAGATE  ST318404LC   0006 
PQ: 0 ANSI: 3
[  516.650397] scsi target0:0:1: tagged command queuing enabled, command queue 
depth 16.
[  516.650426] scsi target0:0:1: Beginning Domain Validation
[  516.658493] scsi target0:0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 
16)
[  516.662272] scsi target0:0:1: Domain Validation skipping write tests
[  516.662291] scsi target0:0:1: Ending Domain Validation
[  516.967469] scsi 0:0:3:0: Direct-Access SEAGATE  ST39173WC5764 
PQ: 0 ANSI: 2
[  516.967498] scsi target0:0:3: tagged command queuing enabled, command queue 
depth 16.
[  516.967528] scsi target0:0:3: Beginning Domain Validation
[  516.978845] scsi target0:0:3: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 
15)
[  516.984154] scsi target0:0:3: Domain Validation skipping write tests
[  516.984172] scsi target0:0:3: Ending Domain Validation
[  518.041764] end_request: I/O error, dev fd0, sector 0
[  518.065764] end_request: I/O error, dev fd0, sector 0
[  518.170078] scsi 1:0:5:0: Sequential-Access HP   C1533A   A708 
PQ: 0 ANSI: 2
[  518.170116] scsi target1:0:5: Beginning Domain Validation
[  518.186149] scsi target1:0:5: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 16)
[  518.199836] scsi target1:0:5: Domain Validation skipping write tests
[  518.199856] scsi target1:0:5: Ending Domain Validation
[  518.214437] scsi 1:0:6:0: CD-ROMTOSHIBA  XM6201TASUN32XCD 1103 
PQ: 0 ANSI: 2
[  518.214473] scsi target1:0:6: Beginning Domain Validation
[  518.215717] scsi target1:0:6: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 16)
[  518.216685] scsi target1:0:6: Domain Validation skipping write tests
[  518.216704] scsi target1:0:6: Ending Domain Validation
[  520.105765] end_request: I/O error, dev fd0, sector 0
[  520.129764] end_request: I/O error, dev fd0, sector 0
[  520.256605] sd_mod: Unknown symbol blk_queue_physical_block_size_fixed
[  520.355944] sd_mod: Unknown symbol blk_queue_physical_block_size_fixed
[  520.391196] sd_mod: Unknown symbol blk_queue_physical_block_size_fixed
[  520.650587] osst :I: Tape driver with OnStream support version 0.99.4
[  520.650598] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[  520.679948] sr0: scsi-1 drive
[  520.679964] Uniform CD-ROM driver Revision: 3.20
[  520.681493] sr 1:0:6:0: Attached scsi CD-ROM sr0

-- 
Netzwerkadministration/Zentrale Dienste, Interdiziplinaeres 
Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg
IWR; INF 368; 69120 Heidelberg; Tel: (06221)54-8236 Fax: -5224
Email: hermann.la...@iwr.uni-heidelberg.de



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#595733: #595733 [sparc] sym53c8xx is not autodetected

2011-01-17 Thread Ferenc Wagner 
Hermann Lauer hermann.la...@iwr.uni-heidelberg.de writes:

 On Sun, Jan 16, 2011 at 08:47:40PM +, Miguel Figueiredo wrote:
 
 sym53c8xx is included in the linux-kernel-di-sparc-2.6 so i guess it
 should be detected.
 Can you try with a recent image and give feedback?

 You are right, it is detected now (9699532 2010-12-15 17:09 boot_beta2.img).
 But a symbol is missing, so sd_mod did not load - see below.

 [  520.256605] sd_mod: Unknown symbol blk_queue_physical_block_size_fixed

That's a signal of kernel/module mismatch which can happen sometimes in
certain images (I'd welcome some clarification from somebody myself).
Please check with the RC1 images, when you have time.
-- 
Thanks,
Feri.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#595733: #595733 [sparc] sym53c8xx is not autodetected

2011-01-17 Thread Hermann Lauer 
On Mon, Jan 17, 2011 at 11:17:20AM +0100, Ferenc Wagner wrote:
 Hermann Lauer hermann.la...@iwr.uni-heidelberg.de writes:
 
  On Sun, Jan 16, 2011 at 08:47:40PM +, Miguel Figueiredo wrote:
  
  sym53c8xx is included in the linux-kernel-di-sparc-2.6 so i guess it
  should be detected.
  Can you try with a recent image and give feedback?
 
  You are right, it is detected now (9699532 2010-12-15 17:09 boot_beta2.img).
  But a symbol is missing, so sd_mod did not load - see below.
 
  [  520.256605] sd_mod: Unknown symbol blk_queue_physical_block_size_fixed
 
 That's a signal of kernel/module mismatch which can happen sometimes in
 certain images (I'd welcome some clarification from somebody myself).
 Please check with the RC1 images, when you have time.

Checked now, module loads but the installer is still reporting no
disk - but when breaking into the shell from the installer
I noticed that all partitions are detected. So retrying disk detection at
that point worked.

Maybe a timing issue, probably due to some md arrays on my disks. 

Please tell if and what information would be helpfull, at the moment
for me it's only a minor issue with the retrying of disk detection 
workaround available. At least a release note entry would be fine.

Thanks for your work on sparc,
  Hermann

-- 
Netzwerkadministration/Zentrale Dienste, Interdiziplinaeres 
Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg
IWR; INF 368; 69120 Heidelberg; Tel: (06221)54-8236 Fax: -5224
Email: hermann.la...@iwr.uni-heidelberg.de



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#595733: #595733 [sparc] sym53c8xx is not autodetected

2011-01-16 Thread Miguel Figueiredo 
Hi,

sym53c8xx is included in the linux-kernel-di-sparc-2.6 so i guess it
should be detected.
Can you try with a recent image and give feedback?

-- 
Melhores cumprimentos/Best regards,

Miguel Figueiredo
http://www.DebianPT.org




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org