Package: src:linux Version: 3.2.51-1 Severity: normal Dear Maintainer,
I installed wheezy on an Asus Eeepc 1025c. Everything went almost well during installation, however I registered several problems about the suspend and hibernation commands: in both cases I always get a scrambled, full of colors screen with the undergoing system still working. Usually I use the Ctrl-Alt-F1 combination to activate a blind console in which I login as root and I run a reboot command. I looked around for a solution and I found a workaround listed in the Debian Wiki for the 1101HA model (wiki.debian.org/DebianEeePC/Model/1101HA). In this workaround is suggested to create the file /etc/pm/config.d/gma500 with this line: ADD_PARAMETERS='--quirk-vbestate-restore'. This solves the suspend/resume problems, but the issue is still present when I try the hibernation/thaw steps. So, everytime I try to hibernate the computer, it is not possible to thaw the system with a working video. Thanks in advance. pkz -- Package-specific info: ** Version: Linux version 3.2.0-4-686-pae (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=6d54cbc6-e467-4573-ba86-96f992d3bbba ro quiet acpi_osi=Linux ** Not tainted ** Kernel log: [ 4.238190] gma500 0000:00:02.0: allocated 1024x600 fb [ 4.238550] fbcon: psbfb (fb0) is primary device [ 4.478462] usb 1-3: New USB device found, idVendor=04f2, idProduct=b26f [ 4.478481] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 4.478497] usb 1-3: Product: USB2.0 0.3M UVC WebCam [ 4.478509] usb 1-3: Manufacturer: Chicony Electronics Co., Ltd. [ 4.478521] usb 1-3: SerialNumber: 0x0001 [ 4.534499] Linux media interface: v0.10 [ 4.543269] Linux video capture interface: v2.00 [ 4.548730] uvcvideo: Found UVC 1.00 device USB2.0 0.3M UVC WebCam (04f2:b26f) [ 4.559725] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 4.567597] input: USB2.0 0.3M UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input6 [ 4.567787] usbcore: registered new interface driver uvcvideo [ 4.567792] USB Video Class driver (1.1.1) [ 4.600103] Console: switching to colour frame buffer device 128x37 [ 4.607410] fb0: psbfb frame buffer device [ 4.607414] drm: registered panic notifier [ 4.607500] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0 [ 4.607568] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.607578] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.607618] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.607704] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060 [ 4.607816] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.607825] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.607838] usb usb2: Product: UHCI Host Controller [ 4.607845] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd [ 4.607851] usb usb2: SerialNumber: 0000:00:1d.0 [ 4.608256] hub 2-0:1.0: USB hub found [ 4.608273] hub 2-0:1.0: 2 ports detected [ 4.608515] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4.608526] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.608554] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 4.608638] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000f040 [ 4.608744] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.608753] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.608761] usb usb3: Product: UHCI Host Controller [ 4.608768] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd [ 4.608775] usb usb3: SerialNumber: 0000:00:1d.1 [ 4.609993] hub 3-0:1.0: USB hub found [ 4.610009] hub 3-0:1.0: 2 ports detected [ 4.610250] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.610261] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.610293] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 4.610379] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020 [ 4.610487] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.610496] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.610502] usb usb4: Product: UHCI Host Controller [ 4.610508] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd [ 4.610515] usb usb4: SerialNumber: 0000:00:1d.2 [ 4.611624] hub 4-0:1.0: USB hub found [ 4.611640] hub 4-0:1.0: 2 ports detected [ 4.612732] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 4.612784] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4.623848] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a. [ 4.684059] HDMI status: Codec=1 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 4.684693] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 4.686005] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.787710] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9 [ 5.629829] Adding 4789244k swap on /dev/sda5. Priority:-1 extents:1 across:4789244k SS [ 5.693570] EXT4-fs (sda1): re-mounted. Opts: (null) [ 5.823549] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 5.898137] loop: module loaded [ 8.474010] RPC: Registered named UNIX socket transport module. [ 8.474019] RPC: Registered udp transport module. [ 8.474025] RPC: Registered tcp transport module. [ 8.474030] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.484349] FS-Cache: Loaded [ 8.512767] FS-Cache: Netfs 'nfs' registered for caching [ 8.530454] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 10.341222] Bluetooth: Core ver 2.16 [ 10.341290] NET: Registered protocol family 31 [ 10.341297] Bluetooth: HCI device and connection manager initialized [ 10.341305] Bluetooth: HCI socket layer initialized [ 10.341312] Bluetooth: L2CAP socket layer initialized [ 10.341534] Bluetooth: SCO socket layer initialized [ 10.363108] Bluetooth: RFCOMM TTY layer initialized [ 10.363125] Bluetooth: RFCOMM socket layer initialized [ 10.363131] Bluetooth: RFCOMM ver 1.11 [ 10.394185] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.394193] Bluetooth: BNEP filters: protocol multicast [ 10.599343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.699471] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10 [ 10.771642] atl1c 0000:03:00.0: irq 46 for MSI/MSI-X [ 10.830647] lp: driver loaded but no devices found [ 10.841163] ppdev: user-space parallel port driver [ 10.855622] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.959389] wlan0: authenticate with bc:05:43:b5:ea:56 (try 1) [ 12.961624] wlan0: authenticated [ 12.978775] wlan0: associate with bc:05:43:b5:ea:56 (try 1) [ 12.982838] wlan0: RX AssocResp from bc:05:43:b5:ea:56 (capab=0x431 status=0 aid=1) [ 12.982845] wlan0: associated [ 12.987906] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 12.988115] cfg80211: Calling CRDA for country: DE [ 13.051619] cfg80211: Regulatory domain changed to country: DE [ 13.051629] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.051639] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 13.051648] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 13.051657] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 13.051665] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 23.575333] wlan0: no IPv6 routers present ** Model information not available ** Loaded modules: cryptd aes_i586 aes_generic parport_pc ppdev lp parport bnep rfcomm bluetooth cpufreq_stats cpufreq_userspace cpufreq_powersave cpufreq_conservative uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop joydev snd_hda_codec_hdmi snd_hda_codec_realtek uvcvideo videodev media arc4 eeepc_wmi asus_wmi sparse_keymap snd_hda_intel snd_hda_codec snd_hwdep snd_pcm ath9k snd_page_alloc ath9k_common snd_seq ath9k_hw ath mac80211 cfg80211 psmouse iTCO_wdt snd_seq_device coretemp serio_raw evdev iTCO_vendor_support rfkill uhci_hcd snd_timer atl1c battery ac gma500_gfx power_supply drm_kms_helper ehci_hcd video snd drm usbcore usb_common acpi_cpufreq mperf i2c_algo_bit soundcore i2c_core wmi button processor ext4 crc16 mbcache jbd2 sd_mod crc_t10dif ahci libahci libata scsi_mod thermal thermal_sys ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 30:85:a9:83:38:45 brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 74:e5:43:5b:8a:72 brd ff:ff:ff:ff:ff:ff inet 192.168.178.28/24 brd 192.168.178.255 scope global wlan0 inet6 fe80::76e5:43ff:fe5b:8a72/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 3600 48 0 0 0 0 0 0 3600 48 0 0 0 0 0 0 wlan0: 7809371 10626 0 0 0 0 0 0 775838 5326 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 9131 total packets received 339 with invalid addresses 0 forwarded 0 incoming packets discarded 6416 incoming packets delivered 5216 requests sent out 8 outgoing packets dropped Icmp: 26 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 26 24 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 24 IcmpMsg: InType3: 26 OutType3: 24 Tcp: 204 active connections openings 0 passive connection openings 2 failed connection attempts 20 connection resets received 0 connections established 5563 segments received 4736 segments send out 2 segments retransmited 4 bad segments received. 245 resets sent Udp: 1166 packets received 24 packets to unknown port received. 0 packet receive errors 391 packets sent UdpLite: TcpExt: 2 packets pruned from receive queue because of socket buffer overrun 64 TCP sockets finished time wait in fast timer 78 delayed acks sent 1 delayed acks further delayed because of locked socket Quick ack mode was activated 5 times 3409 packet headers predicted 347 acknowledgments not containing data payload received 128 predicted acknowledgments 2 congestion windows recovered without slow start after partial ack 2 other TCP timeouts 175 packets collapsed in receive queue due to low socket buffer 5 DSACKs sent for old packets 1 DSACKs received 22 connections reset due to unexpected data 20 connections reset due to early user close TCPSackShiftFallback: 1 TCPChallengeACK: 4 TCPSYNChallenge: 4 IpExt: InMcastPkts: 99 OutMcastPkts: 81 InBcastPkts: 432 OutBcastPkts: 76 InOctets: 7081428 OutOctets: 589450 InMcastOctets: 11197 OutMcastOctets: 6075 InBcastOctets: 52270 OutBcastOctets: 12602 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller [8086:0bf2] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:84a9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller [8086:0be2] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:84a9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at dfc00000 (32-bit, non-prefetchable) [size=1M] Region 1: I/O ports at f0c0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: gma500 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8437] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at dff00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c0400000-c05fffff Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: dfe00000-dfefffff Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dfd00000-dfdfffff Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at f060 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at f040 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at f020 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at dff05000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at f0b0 [size=8] Region 1: I/O ports at f0a0 [size=4] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f000 [size=16] Region 5: Memory at dff04000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:83ad] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at 0800 [size=32] 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: Lite-On Communications Inc Device [11ad:6627] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at dfe00000 (64-bit, non-prefetchable) [size=512K] Expansion ROM at dfe80000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1) Subsystem: ASUSTeK Computer Inc. Device [1043:8468] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at dfd00000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at e000 [size=128] Capabilities: <access denied> Kernel driver in use: atl1c ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 04f2:b26f Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 7.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 3.2.0-4-686-pae (SMP w/4 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-686-pae depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-686-pae recommends: pn firmware-linux-free <none> ii libc6-i686 2.13-38 Versions of packages linux-image-3.2.0-4-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u2 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae: linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org