Bug#784292: Fwd: Bug#784292: quagga: ospf6d no loner updates route after upgrade to Jessie
-- Forwarded message -- From: Kaz Nishimura kazs...@vx68k.org Date: Tue, May 5, 2015 at 9:02 PM Subject: Re: Bug#784292: quagga: ospf6d no loner updates route after upgrade to Jessie To: Christian Brunotte c...@lathspell.de These are my Quagga configurations, which are almost the same as the ones before the upgrade (I added interface sit2 and multicast to zebra.conf). zebra.conf (backbone end, non-essential comments deleted): -- log file /var/log/quagga/zebra.log access-list private permit 172.20.0.0/16 access-list private deny any route-map all deny 90 route-map authorized permit 10 match ip address private interface sit2 multicast ip route 172.20.0.0/20 172.20.240.1 ip route 172.20.247.0/24 dummy0 #ipv6 route 2002:b4eb:feac:ff00::/56 sit2 ip protocol rip route-map authorized ip protocol ospf route-map authorized -- ospf6d.conf (backbone end, non-essential comments deleted): -- log file /var/log/quagga/ospf6d.log router ospf6 router-id 172.20.240.2 interface eth0 area 0.0.0.0 #interface sit2 area 172.20.0.1 interface sit2 area 0.0.0.0 redistribute connected redistribute static -- zebra.conf (leaf end, non-essential comments deleted): -- log file /var/log/quagga/zebra.log access-list private permit 172.20.0.0/16 access-list private deny any route-map all deny 90 route-map authorized permit 10 match ip address private interface macvlan0 no ipv6 nd suppress-ra ipv6 nd prefix 2002:b4eb:feac:ff00::/64 interface sit2 multicast ip route 172.20.240.0/20 172.20.0.254 -- ospf6d.conf (leaf end, non-essential comments deleted): -- log file /var/log/quagga/ospf6d.log router ospf6 router-id 180.235.254.172 #interface sit2 area 172.20.0.1 interface sit2 area 0.0.0.0 redistribute connected redistribute static -- On Tue, May 5, 2015 at 5:24 PM, Christian Brunotte c...@lathspell.de wrote: Hello Can you please explain the problem on the Quagga users mailing list (https://lists.quagga.net/mailman/listinfo/quagga-users) and attach the (anonymized) config files? My IPv6 OSPF knowledge is not good enough to help you myself :) It would be helpful if you could give 0.99.24.2 from Debian testing a try, the .deb package should currently be installable fine on Jessie as Testing still has the same library versions as Jessie: https://packages.debian.org/stretch/quagga Best regards, -christian- Am Tue, 05 May 2015 09:36:09 +0900 schrieb Kaz Nishimura kazs...@vx68k.org: Package: quagga Version: 0.99.23.1-1 Severity: normal Tags: ipv6 Dear Maintainer, After upgrade to Jessie, ospf6d does not update IPv6 route for a SIT tunnel (that is the only route I used ospf6d for). Before the upgrade, it just worked. As I see the state of ospf6d by vtysh, it seems it updates its internal database (show ipv6 ospf6 database) but does not reflect it to its internal routing table (show ipv6 ospf6 route). According to the release announcement, many changes have been made in version 0.99.23, so they could affect the behavior, IMO. I do not know if version 0.99.24 has a fix for it. As ospf6d is not working for me now, I am using ripngd as a backup, and it works fine. -- System Information: Debian Release: 8.0 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 3.16.0-4-686-pae (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages quagga depends on: ii adduser3.113+nmu3 ii debconf [debconf-2.0] 1.5.56 ii iproute2 3.16.0-2 ii libc6 2.19-18 ii libcap21:2.24-8 ii libpam0g 1.1.8-3.1 ii libreadline6 6.3-8+b3 ii libtinfo5 5.9+20140913-1+b1 ii logrotate 3.8.7-1+b1 quagga recommends no packages. Versions of packages quagga suggests: pn snmpd none -- Configuration Files: /etc/quagga/daemons changed: zebra=yes bgpd=no ospfd=no ospf6d=yes ripd=yes ripngd=yes isisd=no babeld=no -- debconf information: * quagga/really_stop: true -- Content Delivery Server Dienste _ NETCOLOGNE Gesellschaft für Telekommunikation mbH Am Coloneum 9 | 50829 Köln Tel: 0221 -8711 | Fax: 0221 -78711 www.netcologne.de Geschäftsführer: Jost Hermanns Mario Wilhelm Vorsitzender des Aufsichtsrates: Dr. Andreas Cerbe HRB 25580, AG Köln Diese Nachricht (inklusive aller Anhänge) ist vertraulich. Sollten Sie diese Nachricht versehentlich erhalten haben, bitten wir, den Absender (durch Antwort-E-Mail) hiervon unverzüglich zu informieren und die Nachricht zu löschen. Die E-Mail darf in diesem Fall weder vervielfältigt noch in anderer Weise verwendet werden.
Bug#784292: Fwd: Bug#784292: quagga: ospf6d no loner updates route after upgrade to Jessie
-- Forwarded message -- From: Kaz Nishimura kazs...@vx68k.org Date: Tue, May 5, 2015 at 9:21 PM Subject: Re: Bug#784292: quagga: ospf6d no loner updates route after upgrade to Jessie To: Christian Brunotte c...@lathspell.de I upgraded to 0.99.24-2 from testing but it was not resolved. This is the output of 'show ipv6 ospf6 database' command on vtysh (backbone end): -- Area Scoped Link State Database (Area 0.0.0.0) Type LSId AdvRouter Age SeqNum Payload INP 0.0.0.0172.20.240.2153 803c 2002:b4eb:feac:fff0::/64 INP 0.0.0.0172.20.240.2153 803c 240d:0:860a:6600::/64 INP 0.0.0.0180.235.254.172 495 803b 2002:b4eb:feac:fff0::/64 I/F Scoped Link State Database (I/F eth0 in Area 0.0.0.0) Type LSId AdvRouter Age SeqNum Payload Lnk 0.0.0.2172.20.240.2159 8001 fe80::210:c6ff:fe0d:d306 I/F Scoped Link State Database (I/F sit2 in Area 0.0.0.0) Type LSId AdvRouter Age SeqNum Payload Lnk 0.0.0.5172.20.240.2153 803b fe80::ac14:f002 Lnk 0.0.0.4180.235.254.172 495 803b fe80::ac14:1 AS Scoped Link State Database Type LSId AdvRouter Age SeqNum Payload ASE 0.0.0.0172.20.240.2153 803b 2002:b4eb:feac:fff0::/64 ASE 0.0.0.1172.20.240.2153 803b 240d:0:860a:6600::/64 ASE 0.0.0.0180.235.254.172 495 803b 2002:b4eb:feac:ff00::/64 ASE 0.0.0.1180.235.254.172 495 803b 2002:b4eb:feac:fff0::/64 -- Note that the leaf end router (180.235.254.172) and the corresponding destination address (2002:b4eb:feac:ff00::/64) appears in the database. This is the output of 'show ipv6 ospf6 route' command on vtysh (backbone end): -- *N IA 2002:b4eb:feac:fff0::/64 :: sit2 00:05:00 *N IA 240d:0:860a:6600::/64 :: eth0 00:05:00 -- Note that the routing table only has local routes. As ospf6d is in beta state according to Quagga's release announcements, it could become broken in version 0.99.23. If I could have free time, I would examine what were changed in ospf6d in 0.99.23. On Tue, May 5, 2015 at 9:02 PM, Kaz Nishimura kazs...@vx68k.org wrote: These are my Quagga configurations, which are almost the same as the ones before the upgrade (I added interface sit2 and multicast to zebra.conf). zebra.conf (backbone end, non-essential comments deleted): -- log file /var/log/quagga/zebra.log access-list private permit 172.20.0.0/16 access-list private deny any route-map all deny 90 route-map authorized permit 10 match ip address private interface sit2 multicast ip route 172.20.0.0/20 172.20.240.1 ip route 172.20.247.0/24 dummy0 #ipv6 route 2002:b4eb:feac:ff00::/56 sit2 ip protocol rip route-map authorized ip protocol ospf route-map authorized -- ospf6d.conf (backbone end, non-essential comments deleted): -- log file /var/log/quagga/ospf6d.log router ospf6 router-id 172.20.240.2 interface eth0 area 0.0.0.0 #interface sit2 area 172.20.0.1 interface sit2 area 0.0.0.0 redistribute connected redistribute static -- zebra.conf (leaf end, non-essential comments deleted): -- log file /var/log/quagga/zebra.log access-list private permit 172.20.0.0/16 access-list private deny any route-map all deny 90 route-map authorized permit 10 match ip address private interface macvlan0 no ipv6 nd suppress-ra ipv6 nd prefix 2002:b4eb:feac:ff00::/64 interface sit2 multicast ip route 172.20.240.0/20 172.20.0.254 -- ospf6d.conf (leaf end, non-essential comments deleted): -- log file /var/log/quagga/ospf6d.log router ospf6 router-id 180.235.254.172 #interface sit2 area 172.20.0.1 interface sit2 area 0.0.0.0 redistribute connected redistribute static -- On Tue, May 5, 2015 at 5:24 PM, Christian Brunotte c...@lathspell.de wrote: Hello Can you please explain the problem on the Quagga users mailing list (https://lists.quagga.net/mailman/listinfo/quagga-users) and attach the (anonymized) config files? My IPv6 OSPF knowledge is not good enough to help you myself :) It would be helpful if you could give 0.99.24.2 from Debian testing a try, the .deb package should currently be installable fine on Jessie as Testing still has the same library versions as Jessie: https://packages.debian.org/stretch/quagga Best regards, -christian- Am Tue, 05 May 2015 09:36:09 +0900 schrieb Kaz Nishimura kazs...@vx68k.org: Package: quagga Version: 0.99.23.1-1 Severity: normal Tags: ipv6 Dear Maintainer, After upgrade to Jessie, ospf6d does not update IPv6 route for a SIT tunnel (that is the only route I used ospf6d for). Before the upgrade, it just worked. As I see the state of ospf6d by vtysh, it seems it updates its internal database (show ipv6 ospf6 database) but does not reflect it to its internal routing table (show ipv6 ospf6 route).
