Updating the bugreport. (two persons are getting this email throug BCC) On Thu, Mar 01, 2018 at 04:04:34PM +0000, ### #### wrote: > From: ### ####, Sent: Thursday, March 1, 2018 8:02:04 AM > > > > > Hi, > > > > > > My name is ### ####. I'm a network engineer in #####. > > > > > > I was wondering if you could help me with RADVD on debian 9 since I saw > > your bug report here: > > > > https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=879681 > > > > > > My apt install radvd completed without error, but I get the same > > error message listed in the bug report. > > > > > > Could you please give me a bit more detail on how to implement the > > override and or how to install from the 1:2.16-3 version > > > > > > Thanks! > > > > ### > > > > > > I tried this: > > > > 07:55root@zfrr1 /etc ? cat /etc/systemd/system/radvd.service.d/override.conf > > cat: /etc/systemd/system/radvd.service.d/override.conf: No such file or > > directory > > 07:55root@zfrr1 /etc ? > > > > > > - and I'm not experience with installing 1:2.16-3 from source - but would > > like to learn. > > > > > > ~~~ > > > > > > > > 07:53root@zfrr1 /etc ? apt install radvd > > Reading package lists... Done > > Building dependency tree > > Reading state information... Done > > radvd is already the newest version (1:2.15-2). > > The following package was automatically installed and is no longer required: > > linux-image-4.9.0-4-amd64 > > Use 'apt autoremove' to remove it. > > 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. > > 07:53root@zfrr1 /etc ? service radvd start > > Job for radvd.service failed because the control process exited with error > > code. > > See "systemctl status radvd.service" and "journalctl -xe" for details. > > 07:53root@zfrr1 /etc ? systemctl status radvd.service > > ?$B!| radvd.service - Router advertisement daemon for IPv6 > > Loaded: loaded (/lib/systemd/system/radvd.service; disabled; vendor > > preset: enabled) > > Active: failed (Result: exit-code) since Thu 2018-03-01 07:53:35 PST; > > 16s ago > > Docs: man:radvd(8) > > Process: 9896 ExecStartPre=/usr/sbin/radvd --logmethod stderr_clean > > --configtest (code=exited, status=1/FAILURE) > > > > Mar 01 07:53:34 zfrr1 systemd[1]: Starting Router advertisement daemon for > > IPv6... > > Mar 01 07:53:35 zfrr1 radvd[9896]: /etc/radvd.conf:1 error: syntax error, > > unexpected STRING, expecting T_INTERFACE > > Mar 01 07:53:35 zfrr1 radvd[9896]: exiting, failed to read config file > > Mar 01 07:53:35 zfrr1 systemd[1]: radvd.service: Control process exited, > > code=exited status=1 > > Mar 01 07:53:35 zfrr1 systemd[1]: Failed to start Router advertisement > > daemon for IPv6. > > Mar 01 07:53:35 zfrr1 systemd[1]: radvd.service: Unit entered failed state. > > Mar 01 07:53:35 zfrr1 systemd[1]: radvd.service: Failed with result > > 'exit-code'. > > 07:53root@zfrr1 /etc ? > > > here is my config file: > > 08:03root@zfrr1 /etc ? more radvd.conf > nterface enp3s0 > { > AdvSendAdvert on; > prefix 2607:ff10:face:f1::/64 > { > }; > }; > 08:03root@zfrr1 /etc ? ip link > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode > DEFAULT group default qlen 1 > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > 2: enp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast > state DOWN mode DEFAULT group default qlen 1000 > link/ether 00:01:2e:78:9c:2c brd ff:ff:ff:ff:ff:ff > 3: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state > UP mode DEFAULT group default qlen 1000 > link/ether 00:01:2e:78:9c:2d brd ff:ff:ff:ff:ff:ff > 08:03root@zfrr1 /etc ? >
So this is about an error in 2.15 which is fixed 2.16. I think I should an upload to Strech backports. When in a hurry do wget http://stappers.it/do303/debian/unstable/main/$(dpkg --print-architecture)/radvd.scr cat radvd.scr sh radvd.scr # verify checksums and consider the `sudo dpkg -i radvd*.deb` So no training how to install from source. Please avoid private messages for non private issues. Cheers Geert Stappers DD P.S. Thanks for the reminder the open bugreport
signature.asc
Description: Digital signature