Bug#605145: deluge: Menu entries for file priority is disabled
Well... Problem seems disapper after reboot. I don't know what is it was. В Срд, 08/12/2010 в 16:30 +0100, Cristian Greco пишет: On Sun, 28 Nov 2010 00:04:09 +0300 George Shuklin ama...@desunote.ru wrote: Package: deluge Version: 1.3.1-1 Severity: normal Context menu for files in downloading torrent are disabled (and no way to change download priority). Hi George, your config file seems ok... anything interesting logged to the terminal when trying to open the context menu? Thanks, -- Cristian Greco GPG key ID: 0xCF4D32E4 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#606798: iscsitarget-dkms: Package build starts on dpkg-reconfigure
Package: iscsitarget-dkms Version: 1.4.20.2-1 Severity: normal After installing package nothing happens (no build process, no any reaction). If run dpkg-reconfigure, it suddenly starts to build package. I believe this is not default action for reconfigure. Steps to reproduce (may be with little non-related stuff): 1) Install fresh squeeze 2) Install iscsitarget 3) Install iscsitarget-dkms 4) Run dpkg-reconfigure debconf 5) Set dialog, low mode 6) run dpkg-reconfigure Actual behavior: Build process for iscsi_trgt.ko after step 6. Expected bahavior: Build process at step 3, some questions to user before step 6. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages iscsitarget-dkms depends on: ii dkms 2.1.1.2-5 Dynamic Kernel Module Support Fram ii make 3.81-8 An utility for Directing compilati iscsitarget-dkms recommends no packages. iscsitarget-dkms suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#606798: iscsitarget-dkms: Package build starts on dpkg-reconfigure
oops, sorry, I was wrong, I build at very start, but scrollout during other package installation. Well, the single question left is automatic starts for build process with 'low' debconf settings. I believe it shall at least ask about 'rebuild or not' after running dpkg-reconfigure. В Вск, 12/12/2010 в 00:12 +0530, Ritesh Raj Sarraf пишет: Could you please post the terminal logs ? When iscsitarget-dkms is installed, it starts the build, provided that you have all the kernel headers installed. On 12/12/2010 12:04 AM, George Shuklin wrote: Package: iscsitarget-dkms Version: 1.4.20.2-1 Severity: normal After installing package nothing happens (no build process, no any reaction). If run dpkg-reconfigure, it suddenly starts to build package. I believe this is not default action for reconfigure. Steps to reproduce (may be with little non-related stuff): 1) Install fresh squeeze 2) Install iscsitarget 3) Install iscsitarget-dkms 4) Run dpkg-reconfigure debconf 5) Set dialog, low mode 6) run dpkg-reconfigure Actual behavior: Build process for iscsi_trgt.ko after step 6. Expected bahavior: Build process at step 3, some questions to user before step 6. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages iscsitarget-dkms depends on: ii dkms 2.1.1.2-5 Dynamic Kernel Module Support Fram ii make 3.81-8 An utility for Directing compilati iscsitarget-dkms recommends no packages. iscsitarget-dkms suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#600538: Sam__Max_Hit_the_Road: mouse buttons does not work in panoramic view
Good day. Tested on 1.2.1-2 - same problem. Any control keys except 'Esc' is ignored in panoramic view (which make game unsolvable). В Вск, 02/01/2011 в 00:14 +0100, Moritz Muehlenhoff пишет: On Sat, Dec 11, 2010 at 05:23:28PM +0100, Moritz Muehlenhoff wrote: On Mon, Oct 18, 2010 at 01:52:04AM +0400, George Shuklin wrote: Package: scummvm Version: 1.1.1-1 Severity: normal In the game Sam__Max_Hit_the_Road when panoramic view used left/right mouse buttons clicks does not work. Save file for panoramic view attached. I've just uploaded ScummVM 1.2.1. Could you please test, whether the bug still occurs. I can't test it myself, since I don't have a copy of Sam Max. If you run Squeeze, you can simply install the packages from unstable. They should install cleanly on Squeeze. Have you been able to test it? Cheers, Moritz -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#612519: initscripts: mountnfs ignore ASYNCMOUNTNFS=no for hotplug interfaces
Package: initscripts Version: 2.88dsf-13.1 Severity: normal /etc/default/rcS allow use option ASYNCMOUNTNFS=no to make NFS mounts synchronous. But this option is ignored when interface marked as 'hotplug' (not auto) in /etc/network/interfaces. I think the problem is in function exit_unless_last_interface, which one check only interfaces, listed in 'auto' statement and ignore all others, noted as 'hotplug'. By default all eth interfaces listed not as 'auto', but as 'hotplug' by installer. This cause option ASYNCMOUNTNFS=no useless in case of 'default installation of server with ethernet interface'. I see two solution for this problem: 1) check every interface, market as 'hotplug' to be online and wait until they complete mounting. 2) Keep current situation, anounce it as 'feature' and add note to rcS manual page about mandatory 'auto' declation for interfaces, add checking fo hotplug interfaces (non-empty hotplug statement) and print warning on screen, when ASYNCMOUNTNFS is disabled. -- System Information: Debian Release: 6.0 APT prefers unstable APT policy: (990, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages initscripts depends on: ii coreutils 8.5-1GNU core utilities ii debianutils 3.4.3Miscellaneous utilities specific t ii libc6 2.11.2-11Embedded GNU C Library: Shared lib ii lsb-base3.2-27 Linux Standard Base 3.2 init scrip ii mount 2.17.2-9 Tools for mounting and manipulatin ii sysv-rc 2.88dsf-13.1 System-V-like runlevel change mech ii sysvinit-utils 2.88dsf-13.1 System-V-like utilities Versions of packages initscripts recommends: ii e2fsprogs 1.41.12-2 ext2/ext3/ext4 file system utiliti ii psmisc22.13-1utilities that use the proc file s initscripts suggests no packages. -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#610484: ttf-liberation: Uranus sign (U+26E2) and Ophiuchus sign (U+26CE) displays incorrectly
Package: ttf-liberation Version: 1.05.2.20091019-4 Severity: normal Instead Uranus sign (U+26E2) and Ophiuchus sign (U+26CE) pseudographic 'dot matrix' image. Sample in attachment. -- Package-specific info: Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ NameVersion Description +++-===-===-== ii fontconfig 2.8.0-2.1 generic font configuration library - support binaries ii libfreetype62.4.2-2.1 FreeType 2 font engine, shared library files ii libxft2 2.1.14-2 FreeType-based font drawing library for X -- System Information: Debian Release: 6.0 APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- debconf-show failed attachment: uranus-liberation-bug.png
Bug#558445: deluge: Endless 'checking' state for some torrents
Sorry for lag. Right now I'm don't see this behavior, so I think it was fixed or changed unintentionally. I think this bug can be closed, if I see it again, I'll submit additional information. В Чтв, 20/01/2011 в 15:35 +0100, Cristian Greco пишет: Hi, this is just a ping. Please let me know if my previous message was useful in any way. Thanks, -- Cristian Greco GPG key ID: 0xCF4D32E4 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#567023: gimp not save comment field to 'default' when 'remember parameters' used
В Втр, 26/01/2010 в 14:13 -0500, Ari Pollak пишет: amarao wrote: When 'Commentary' field of 'save as jpeg' dialog is filled and 'remember parameters' button used, at next save no any text in commentary field apear. What is the remember parameters button? oops, I'm sorry, I used Russian version. I recheck with English: When 'Comment' field of 'save as JPEG' dialog is filled and 'save default' button used, at next this dialog is used, no any text in comment field appear. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#570535: mediawiki shall update database using dpkg own account debian-sys-maint
Package: mediawiki Version: 1:1.15.1-1 Severity: normal Mediawiki right now become unsuable after upgrading (files are updated, database no). Current SQL update process requied to make by hand AdminSettings.php file in /etc/mediawiki with sql sysop account data (including password) and run /usr/share/mediawiki/maintenance/update.php But debian package system have it own password for database maintenance (debian-sys-maint). I think, updating script shall be runned by dpkg during updates, not by hands. F.e., I someone have rights to do `sudo aptitude update` and have no any other rights (like SQL superuser or rights to write to /etc) we got situation of failed update (real root needed). Even if user will have right to write /etc, there is a big risk to open AdminSettings.php with plaintext password to other users. -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (990, 'stable'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages mediawiki depends on: ii apache22.2.9-10+lenny6 Apache HTTP Server metapackage ii apache2-mpm-prefor 2.2.9-10+lenny6 Apache HTTP Server - traditional n ii debconf [debconf-2 1.5.24Debian configuration management sy ii mime-support 3.44-1MIME files 'mime.types' 'mailcap ii php5 5.2.6.dfsg.1-1+lenny4 server-side, HTML-embedded scripti ii php5-mysql 5.2.6.dfsg.1-1+lenny4 MySQL module for php5 Versions of packages mediawiki recommends: ii mysql-server 5.0.51a-24+lenny3 MySQL database server (metapackage ii mysql-server-5.0 [ 5.0.51a-24+lenny3 MySQL database server binaries ii php5-cli 5.2.6.dfsg.1-1+lenny4 command-line interpreter for the p Versions of packages mediawiki suggests: pn clamav none (no description available) ii imagemagick 7:6.3.7.9.dfsg2-1~lenny3 image manipulation programs pn mediawiki-math none (no description available) pn memcached none (no description available) ii php5-gd 5.2.6.dfsg.1-1+lenny4GD module for php5 -- debconf information: mediawiki/webserver: apache2 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#568807: logrotate: DeprecationWarning in twisted.protocols
Oops, sorry. I've sent bug from diffrent computer whan found bug (but same version of lenny). I look close, and I think it is apt-proxy. Here list of /etc/logrotate.d from original computer: -rw-r--r-- 1 root root 293 Nov 14 23:25 apache2 -rw-r--r-- 1 root root 84 Apr 20 2009 apt -rw-r--r-- 1 root root 168 Jun 28 2008 apt-proxy -rw-r--r-- 1 root root 79 Dec 5 2008 aptitude -rw-r--r-- 1 root root 297 Jan 4 2009 asterisk -rw-r--r-- 1 root root 330 Mar 8 2008 atop -rw-r--r-- 1 root root 111 Feb 3 2009 dpkg -rw-r--r-- 1 root root 100 Sep 8 2008 freeradius -rw-r--r-- 1 root root 1505 Jan 26 2009 mailman -rw-r--r-- 1 root root 837 Aug 27 14:32 mysql-server -rw-r--r-- 1 root root 146 Aug 6 2008 ntop -rw-r--r-- 1 root root 1061 Mar 8 2008 psaccs_atop -rw-r--r-- 1 root root 512 Mar 8 2008 psaccu_atop -rw-r--r-- 1 root root 515 Dec 25 20:21 rsyslog -rw-r--r-- 1 root root 330 Oct 10 09:48 samba -rw-r--r-- 1 root root 206 Jan 3 03:08 squid -rw-r--r-- 1 root root 189 Oct 10 09:48 winbind В Пнд, 08/02/2010 в 04:56 +, Paul Martin пишет: On Mon, Feb 08, 2010 at 12:10:00AM +0300, amarao wrote: /etc/cron.daily/logrotate: /usr/lib/python2.5/site-packages/twisted/manhole/telnet.py:8: DeprecationWarning: As of Twisted 2.1, twisted.protocols.telnet is deprecated. See twisted.conch.telnet for the current, supported API. from twisted.protocols import telnet This won't have come from logrotate itself, but from one of the packages you have installed that uses it (listed below). The odd thing is that I can't work out which of them would be invoking a python script. logrotate itself doesn't use python. -- Package-specific info: Contents of /etc/logrotate.d итого 56 -rw-r--r-- 1 root root 293 Янв 21 2009 apache2 -rw-r--r-- 1 root root 84 Апр 21 2009 apt -rw-r--r-- 1 root root 79 Мар 14 2007 aptitude -rw-r--r-- 1 root root 330 Мар 8 2008 atop -rw-r--r-- 1 root root 248 Апр 5 2009 cups -rw-r--r-- 1 root root 111 Янв 2 2007 dpkg -rw-r--r-- 1 root root 146 Сен 30 2008 exim4-base -rw-r--r-- 1 root root 126 Сен 30 2008 exim4-paniclog -rw-r--r-- 1 root root 837 Апр 19 2009 mysql-server -rw-r--r-- 1 root root 94 Дек 1 2008 ppp -rw-r--r-- 1 root root 1061 Мар 8 2008 psaccs_atop -rw-r--r-- 1 root root 512 Мар 8 2008 psaccu_atop -rw-r--r-- 1 root root 68 Фев 16 2007 scrollkeeper -rw-r--r-- 1 root root 114 Окт 2 2006 unattended-upgrades -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#563231: /etc/freeradius does not purged upon purge command to aptitude
В Птн, 01/01/2010 в 14:12 +0100, Josip Rodin пишет: If freeradius is purged by aptitude (aptitude purge freeradius), configuration files (/etc/freeradius/*) does not removed. Steps to reproduce: aptitude install freeradius aptitude purge freeradius Expected behavior: no /etc/freeradius (and no any files in /etc/freeradius). Actual behavior: Catalogue /etc/freeradius with it content does not removed. What *exactly* remained in your case? /etc/freeradius/ -rw-r--r-- 1 root freerad 929 Sep 7 2008 dictionary -rw-r- 1 root freerad 61497 Sep 7 2008 radiusd.conf And I found, that purging together freeradius, freeradius-common, and freeradius-utils remove /etc/freeradius. Now I don't know, bug this is or not... -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#556570: too many files opened
В Втр, 05/01/2010 в 15:16 +0100, Cristian Greco пишет: I think, I found situation, when problem happens. I got error 'too many files opened' for one of the torrents, and after that (I not sure, that EXACTLY after that) torrents stops to be picked up. I'll now incresize limits for deluge, so, if this problem stops to apear, so this bug is related to fopen error with 'too many files'. (Note: If deluge once 'catch' this error it stops to process files in pickup folder, even new files can be opened due fewer files seeded). Hi, did you have time to investigate a bit more on this issue? I rise up ulimit and now this error does not apear... -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#566731: [Evolution] Bug#566731: evolution: Zoomed header of letter does not restore size when displayed next letter
В Вск, 24/01/2010 в 23:50 +0100, Yves-Alexis Perez пишет: tag 566731 unreproducible thanks On dim., 2010-01-24 at 23:59 +0300, amarao wrote: If text in letter peview has been resized with Ctrl-MouseScroll and next letter has been displayed, letter text switching back to normal size, but header size has been keeped at resized size. E.g. if letter has been zoomed 3x and next letter displayed, it will be displayed with 3x large header and normal text./ I'm sorry, I can't reproduce this. I tried: - selecting a mail - zooming-in using ctrl+scroll - selecting the previous mail with “arrow-up” - reverting to standard zoom using ctrl+0 or ctrl+scroll - selecting the original mail with “arrow-down” The mail is the displayed at normal size, both header and preview pane. Could you be a little more specific? Cheers, I repeat tests: this bug does not appear for plain text messages, but appear for HTML letters. I put gallery of screenshorts and copy of one of the letter: http://desunote.ru/pub/evo-zoom-bug/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#577431: /usr/bin/gnome-open: gnome-open had no man pages
Package: libgnome2-0 Version: 2.20.1.1-1 Severity: normal File: /usr/bin/gnome-open /usr/bin/gnome-open programm had no man pages -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (990, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libgnome2-0 depends on: ii libaudiofile0 0.2.6-7+lenny1 Open-source version of SGI's audio ii libbonobo2-0 2.24.3-1 Bonobo CORBA interfaces library ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib ii libesd0 0.2.36-3 Enlightened Sound Daemon - Shared ii libgconf2-4 2.28.1-1 GNOME configuration database syste ii libglib2.0-0 2.24.0-1 The GLib library of C routines ii libgnome2-common 2.20.1.1-1 The GNOME 2 library - common files ii libgnomevfs2-01:2.22.0-5 GNOME Virtual File System (runtime ii liborbit2 1:2.14.13-0.1 libraries for ORBit2 - a CORBA ORB ii libpopt0 1.15-1 lib for parsing cmdline parameters libgnome2-0 recommends no packages. libgnome2-0 suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#578252: xen-utils-common: documentation/examples contain obsolete and wrong kernels name
Package: xen-utils-common Version: 3.4.2-4 Severity: minor /usr/share/doc/xen-utils-common/examples contain samples with incorrect (for debian) and obsolete kernels names. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-4-xen-amd64 (SMP w/1 CPU core) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xen-utils-common depends on: ii lsb-base 3.2-23 Linux Standard Base 3.2 init scrip ii udev 151-3 /dev/ and hotplug management daemo ii xenstore-utils 3.4.3~rc3-2 Xenstore utilities for Xen xen-utils-common recommends no packages. xen-utils-common suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#578302: /usr/lib/xen-common/bin/xen-utils-wrapper: scripts in xen-hotplug using gawk, but no dependens for gawk for xen packages
Package: xen-utils-common Version: 3.4.2-4 Severity: important File: /usr/lib/xen-common/bin/xen-utils-wrapper xm invoke vtpm-common.sh from /etc/xen/hotplug, wich one call gawk, but gawk is not listed as dependence for xen packages. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-4-xen-amd64 (SMP w/1 CPU core) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xen-utils-common depends on: ii lsb-base 3.2-23 Linux Standard Base 3.2 init scrip ii udev 151-3 /dev/ and hotplug management daemo ii xenstore-utils 3.4.3~rc3-2 Xenstore utilities for Xen xen-utils-common recommends no packages. xen-utils-common suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#577266: xdg-utils: xdg-open documentation: no any information about changing preferred application
Package: xdg-utils Version: 1.0.2-6.1 Severity: normal xdg-open man page and documentation in /usr/share/doc/xdg-utils does not say anything about way to change 'prefered application'. This is really confusing. -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (990, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash xdg-utils depends on no packages. Versions of packages xdg-utils recommends: ii epiphany-gecko [www- 2.22.3-9Intuitive GNOME web browser - Geck ii file 4.26-1 Determines file type using magic ii iceweasel [www-brows 3.5.9-2 Web browser based on Firefox ii konqueror [www-brows 4:4.3.4-1 KDE 4's advanced file manager, web ii links [www-browser] 2.1pre37-1.1Web browser running in text mode ii lynx-cur [www-browse 2.8.7dev9-2.1 Text-mode WWW Browser with NLS sup ii mime-support 3.44-1 MIME files 'mime.types' 'mailcap ii opera [www-browser] 10.10.4742.gcc4.qt3 The Opera Web Browser ii shared-mime-info 0.30-2 FreeDesktop.org shared MIME databa ii w3m [www-browser]0.5.2-2+b1 WWW browsable pager with excellent ii x11-utils7.3+2+nmu1 X11 utilities ii x11-xserver-utils7.3+5 X server utilities Versions of packages xdg-utils suggests: ii desktop-file-uti 0.15-1 Utilities for .desktop files pn exo-utilsnone (no description available) ii kdelibs4c2a 4:3.5.10.dfsg.1-0lenny4 core libraries and binaries for al ii konqueror4:4.3.4-1 KDE 4's advanced file manager, web ii libgnome2-0 2.20.1.1-1 The GNOME 2 library - runtime file ii libgnomevfs2-bin 1:2.22.0-5 GNOME Virtual File System (support ii libgtk2.0-bin2.12.12-1~lenny1The programs for the GTK+ graphica -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#605145: deluge: Menu entries for file priority is disabled
Package: deluge
Version: 1.3.1-1
Severity: normal
Context menu for files in downloading torrent are disabled (and no way to
change download priority).
Configuration file:
{
file: 1,
format: 1
}{
info_sent: 0.0,
lsd: true,
send_info: false,
move_completed_path: /pub/anime/in,
enc_in_policy: 1,
queue_new_to_top: false,
ignore_limits_on_local_network: true,
rate_limit_ip_overhead: true,
daemon_port: 58846,
natpmp: true,
max_active_limit: 48,
utpex: true,
max_active_downloading: 24,
max_active_seeding: 24,
allow_remote: false,
max_half_open_connections: -1,
download_location: /srv/deluge/temporary-download,
compact_allocation: true,
max_upload_speed: -1.0,
cache_expiry: 90,
prioritize_first_last_pieces: false,
auto_managed: true,
enc_level: 2,
max_connections_per_second: -1,
dont_count_slow_torrents: false,
random_outgoing_ports: true,
max_upload_slots_per_torrent: -1,
new_release_check: false,
enc_out_policy: 1,
outgoing_ports: [
0,
0
],
seed_time_limit: 15.0,
cache_size: 16768,
share_ratio_limit: 2.0,
max_download_speed: -1.0,
geoip_db_location: /usr/share/GeoIP/GeoIP.dat,
torrentfiles_location: /home/amarao,
stop_seed_at_ratio: true,
peer_tos: 0x00,
listen_interface: ,
upnp: true,
max_download_speed_per_torrent: -1,
max_upload_slots_global: -1,
enabled_plugins: [],
random_port: true,
autoadd_enable: true,
max_connections_global: -1,
enc_prefer_rc4: true,
listen_ports: [
6881,
6891
],
dht: true,
stop_seed_ratio: 2.0,
seed_time_ratio_limit: 2.0,
max_upload_speed_per_torrent: -1,
copy_torrent_file: false,
del_copy_torrent_file: false,
move_completed: true,
proxies: {
peer: {
username: ,
password: ,
type: 0,
hostname: ,
port: 8080
},
web_seed: {
username: ,
password: ,
type: 0,
hostname: ,
port: 8080
},
tracker: {
username: ,
password: ,
type: 0,
hostname: ,
port: 8080
},
dht: {
username: ,
password: ,
type: 0,
hostname: ,
port: 8080
}
},
add_paused: false,
max_connections_per_torrent: -1,
remove_seed_at_ratio: true,
autoadd_location: /srv/deluge/torrents-queue,
plugins_location: /home/amarao/.config/deluge/plugins
}
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages deluge depends on:
ii deluge-gtk 1.3.1-1 bittorrent client written in Pytho
ii python 2.6.6-3+squeeze1 interactive high-level object-orie
deluge recommends no packages.
deluge suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#595504: krusader: Shift-PgUp/Dn in file selection
Package: krusader Version: 1:2.2.0~beta1-1 Severity: wishlist Right now krusader support file selection by using shif-arrows. FAR Manager and Total Commander (windows) support file selection by using combination: Shift-PgUp Select (deselect, if current file selected) 'one screen' of files up from current file Shift-PgDn Select (deselect, if current file selected) 'one screen' of files down from current file I belive, they be useful in Krusader too. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages krusader depends on: ii kdebase-runtime 4:4.4.5-1runtime components from the offici ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libgcc1 1:4.4.4-9GCC support library ii libkdecore5 4:4.4.5-1the KDE Platform Core Library ii libkdeui5 4:4.4.5-1the KDE Platform User Interface Li ii libkfile4 4:4.4.5-1the File Selection Dialog Library ii libkhtml5 4:4.4.5-1the KHTML Web Content Rendering En ii libkio5 4:4.4.5-1the Network-enabled File Managemen ii libkjsapi4 4:4.4.5-1the KJS API Library for the KDE De ii libkparts4 4:4.4.5-1the Framework for the KDE Platform ii libqt4-dbus 4:4.6.3-1Qt 4 D-Bus module ii libqt4-network 4:4.6.3-1Qt 4 network module ii libqt4-svg 4:4.6.3-1Qt 4 SVG module ii libqt4-xml 4:4.6.3-1Qt 4 XML module ii libqtcore4 4:4.6.3-1Qt 4 core module ii libqtgui4 4:4.6.3-1Qt 4 GUI module ii libsolid4 4:4.4.5-1Solid Library for KDE Platform ii libstdc++6 4.4.4-9 The GNU Standard C++ Library v3 ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime krusader recommends no packages. Versions of packages krusader suggests: pn arjnone(no description available) pn arknone(no description available) ii bzip2 1.0.5-4 high-quality block-sorting file co ii cpio 2.11-4GNU cpio -- a program to manage ar pn kdiff3 | kompare | xxdiff none(no description available) pn kedit none(no description available) pn kmail none(no description available) pn konsolenone(no description available) pn krenamenone(no description available) pn lhanone(no description available) pn md5deep | cfv none(no description available) pn okteta none(no description available) ii p7zip 9.04~dfsg.1-1 7zr file archiver with high compre pn rpmnone(no description available) ii unace 1.2b-7extract, test and view .ace archiv ii unrar 1:3.9.10-1Unarchiver for .rar files (non-fre ii unzip 6.0-4 De-archiver for .zip files ii zip3.0-3 Archiver for .zip files -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#595711: linux-image-2.6.26-2-xen-686: Wrong free memory values for xen kernel with xenballoon use
Package: linux-image-2.6.26-2-xen-686 Severity: important I belive current version of xen (as domU) kernel for debian report free memory wrong: system reports lots of free memory, but acutally all memory is used up. Condition to reproduce: Xen evnironment, maxmem is very large (10-20GiB memory), mem relativly low (800-900MiB). Booted domU reports about 500MiB free, but if we try to use it, we will get swap (or oom/MemoryError is swap disabled) right after about 120MiB. I test this behavior in newer gentoo/SUSE kernel and they in same condition show that about 750MiB is used (this match experemental data). I belive, this somehow related to difference in drivers/xen/balloon.c, gentoo/SUSE version have some lines like totalram_pages--; (in balloon_append() function) and totalram_pages++; (in balloon_retrieve() function) Those lines are in Gentoo kernel (linux-2.6.34-xen) but absent in Debian (linux-image-2.6.26-2-xen-686) -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#595711: linux-image-2.6.26-2-xen-686: Wrong free memory values for xen kernel with xenballoon use
В Пнд, 06/09/2010 в 07:59 +0100, Ian Campbell пишет:
On Mon, 2010-09-06 at 04:03 +0400, George Shuklin wrote:
I belive, this somehow related to difference in drivers/xen/balloon.c,
gentoo/SUSE version have some lines like
totalram_pages--;
(in balloon_append() function)
and
totalram_pages++;
(in balloon_retrieve() function)
Those lines are in Gentoo kernel (linux-2.6.34-xen) but absent in
Debian (linux-image-2.6.26-2-xen-686)
Is the Gentoo kernel pvops or classic-Xen patches?
Are you sure you are using the classic-Xen
(linux-image-...-xen-{686,amd}) kernel rather than the pvops one
(linux-image-...-686-bigmem, no 64 bit pvops in Lenny)?
I wasn't aware that it applied to the classic-Xen case but the
difference you describe sounds like this commit from upstream pvops:
http://git.kernel.org/?p=linux/kernel/git/jeremy/xen.git;a=commit;h=3d65c9488cadd2f11bd4d60c7266e639ece5d0d6
Probably for a 2.6.26 classic-Xen kernel you'd need to adjust the path
to drivers/xen/balloon/balloon.c and perhaps tweak some context a bit
but the concept should still apply.
Classic Xen (xen-686). pv_ops does not support preinflated ballooning
(maxmem mem), so I stuck with classic xen.
I think, balloon code does not differ (principally) in pv_ops and
classic xen.
And, in any way, this bug exists. And it really suck: application ask
memory, one part of kernel (or libc?) thinking of free memory, kernel
found 'no memory left' and start OOM killer. It walking and killing some
random applications (include init).
I'm testing kernel with with patch right now and it seems work fine -
memory reporting correctly and oom kills only most bloated application
requesting tons of memory.
Ian.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#595711: more specific information
Sad, but still not working - same behavior Here simplest test. 1. Set mem=512, maxmem=15GiB (for XCP it is xe vm-memory-limits-set static-min=512MiB static-max=15GiB dynamic-min=2GiB dynamic-max=2GiB). 2. Boot vm. 3. Disable swap. 4. Run following in python (I test is with not only python, but with C application with malloc, etc): file(/proc/meminfo).readlines()[1] 'MemFree: 1924200 kB\n' a= *1024*1024*1024 file(/proc/meminfo).readlines()[1] 'MemFree:873480 kB\n' b= *1024*1024*512 Traceback (most recent call last): File stdin, line 1, in module MemoryError b= *1024*1024*256 c= *1024*1024*128 Traceback (most recent call last): File stdin, line 1, in module MemoryError file(/proc/meminfo).readlines()[1] 'MemFree:610724 kB\n' d= *1024*1024*64 e= *1024*1024*64 Traceback (most recent call last): File stdin, line 1, in module MemoryError file(/proc/meminfo).readlines()[1] 'MemFree:545128 kB\n' ... If we descend to lower values, (about 1-2 MiB), with MemFree about 400-500MiB we will get to OOM killer, rampaging around and killing randomly anyone (sshd, init, etc). В Птн, 10/09/2010 в 08:13 +0100, Ian Campbell пишет: On Wed, 2010-09-08 at 15:52 +0400, George Shuklin wrote: My guess was wrong and this patch do not change situation. Thanks for the extra info. Please could you try the kernel now at http://xenbits.xen.org/people/ianc/2.6.26-25+balloon1/ Compared with +balloon0 I added a patch which I noticed between Debian's 2.6.26 kernel and the SLES11 2.6.27 kernel (and XCP kernel) which looked relevant. Gentoo kernel: http://code.google.com/p/gentoo-xen-kernel/downloads/list Thanks. I'm not familiar enough with Gentoo to know how to turn this tarball of patches into a functioning kernel source tree, it looks like it depends on a base kernel patchset from elsewhere or something. If the above test kernel doesn't fix the issue do you think you could create a tarball of the fully patched gentoo source and put it somewhere I can get it? Thanks, Ian. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#595711: comparation with RHEL kernel
I check situation in same environment with 2.6.18-194.el5xen on CentOS. I found following: 1) 'unusable' memory exist 2) When oom state occur, no 'rampaging' oom_killer appear, only bloated application die. This behavior differ from describing above: In Debian oom_killer in same situation starts to kill some random processes with number much higher needed to free required memory. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#597466: ia32-libs: attempt to rewrite files from other package
Package: ia32-libs Version: 20100914_amd64 Severity: normal during upgrade: Unpacking ia32-libs (from .../ia32-libs_20100914_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/ia32-libs_20100914_amd64.deb (--unpack): trying to overwrite '/usr/lib32/libnspr4.so.0d', which is also in package ia32-libs-workaround-499043 0.0.1+lenny1 -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages ia32-libs depends on: ii dpkg1.15.8.5 Debian package management system ii lib32asound21.0.23-1 shared library for ALSA applicatio ii lib32bz2-1.01.0.5-5 high-quality block-sorting file co ii lib32gcc1 1:4.4.4-15 GCC support library (32 bit Versio ii lib32ncurses5 5.7+20100313-3 shared libraries for terminal hand ii lib32stdc++64.4.4-15 The GNU Standard C++ Library v3 (3 ii lib32v4l-0 0.8.0-1 Collection of video4linux support ii lib32z1 1:1.2.3.4.dfsg-3 compression library - 32 bit runti ii libc6-i386 2.11.2-6 Embedded GNU C Library: 32-bit sha ia32-libs recommends no packages. Versions of packages ia32-libs suggests: pn ia32-libs-gtk none (no description available) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#598077: Stop pickup torrents files if bad-named filename exists in pickup folder
Package: deluge Version: 1.3.0-1 Severity: normal I recheck problem, it starts when invalid torrent file found (I think, idea about wrong file names was wrong). Every time deluge stops to pick up *.torrent files I see *.torrent.invalid file in directory. Until it appears, torrent files picking up normally. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii deluge-gtk 1.3.0-1 bittorrent client written in Pytho ii python 2.6.6-3+squeeze1 interactive high-level object-orie deluge recommends no packages. deluge suggests no packages. -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#598060: openttd: disabled buttons do not become enabled if new transport become avaible
Package: openttd Version: 1.0.4-1 Severity: minor If game started around 1929 and road control pannel opened, buttons for bus stations are not avaible (it's ok). But when new transport become avaible those buttons are still disabled until pannel will be closed and opened. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages openttd depends on: ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib ii libfontconfig1 2.8.0-2.1generic font configuration library ii libfreetype62.4.2-2 FreeType 2 font engine, shared lib ii libgcc1 1:4.4.4-16 GCC support library ii libicu444.4.1-6 International Components for Unico ii liblzo2-2 2.03-2 data compression library ii libpng12-0 1.2.44-1 PNG library - runtime ii libsdl1.2debian 1.2.14-6 Simple DirectMedia Layer ii libstdc++6 4.4.4-16 The GNU Standard C++ Library v3 ii openttd-data1.0.4-1 common data files for the OpenTTD ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime Versions of packages openttd recommends: ii openttd-opengfx 0.2.4-1a free graphics set for use with t pn openttd-openmsx none (no description available) pn timidity none (no description available) ii x11-utils 7.5+4 X11 utilities Versions of packages openttd suggests: pn openttd-opensfx none (no description available) -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#598077: deluge: Stop pickup torrents files if bad-named filename exists in pickup folder
Package: deluge Version: 1.2.3+git20100712.0b609bf-1 Severity: normal If deluge configured to pick up torrent file from directory, bad filenames in this directory stop deluge picking up any normal torrent files. This bug appear only after starting deluge. Steps to reproduce: 1) Starts deluge with configured pickup folder 2) Put bad-named torrent file in the pickup folder 3) Put normally named file in the pickup folder. Sample of 'bad' names: -rw-r--r-- 1 user user 83460 Aug 4 17:03 ??ѧ?Ĭʾ¼ Highschool of the Dead01-05MKV-720P??-??.torrent -rw-r--r-- 1 user user 16263 Aug 4 11:02 [ray=out]_Tengen_Toppa_Gurren_Lagann_KIRAMEKI?%98%85YOUKO_BOX_-PIECES_of_SWEET_STARS-_[DVD][3612BF83].mkv.torrent -rw-r--r-- 1 user user 41637 Aug 7 16:02 ͥ??ʦREBORN196??RMVB+MKV-720P??-.torrent Hexdump of one of the names: a1 be d1 a7 d4 b0 c4 ac ca be c2 bc 20 48 69 67 | Hig| 0010 68 73 63 68 6f 6f 6c 20 6f 66 20 74 68 65 20 44 |hschool of the D| 0020 65 61 64 a1 bf b8 fc d0 c2 d6 c1 a1 be b5 da 30 |ead0| 0030 31 2d 30 35 bb b0 a1 bf 4d 4b 56 2d 37 32 30 50 |1-05MKV-720P| 0040 bc f2 2d b7 b1 2e 74 6f 72 72 65 6e 74 0a|..-...torrent.| 004e -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii deluge-gtk 1.2.3+git20100712.0b609bf-1 bittorrent client written in Pytho ii python 2.6.6-3 interactive high-level object-orie deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#598376: command line -i eth0 -i eth1 cause segmentation fault in iftop
Package: iftop Version: 0.17-16 Severity: normal If log as root (sudo does not work) running iftop -i eth0 -i eth1 cause segmentation fault. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages iftop depends on: ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib ii libncurses5 5.7+20100313-3 shared libraries for terminal hand ii libpcap0.81.1.1-2system interface for user-level pa iftop recommends no packages. iftop suggests no packages. -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#598646: deluge: Untranslated context menu item (russian)
Package: deluge Version: 1.2.3+git20100712.0b609bf-1 Severity: minor Tags: l10n Context menu for torrents contain untranslated to Russian item: 'Pause', I think it shall be translated as 'Пауза'. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii deluge-gtk 1.2.3+git20100712.0b609bf-1 bittorrent client written in Pytho ii python 2.6.6-3 interactive high-level object-orie deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#595711: new bug description
I found one more very interesting feature of this bug: When memory overcommitment is disabled, system shall not be in state when OOM killer is called. (Only 'EOM' for greedy application). But with this kernel OOM is still appear, even no overcommitment happens. Steps to reproduce: mem=1GiB maxmem=16GiB disable swap. After VM boot: sysctl vm.overcommit_memory=2 vm.overcommit_memory = 2 python a= *1024*1024*128 b= *1024*1024*128 c= *1024*1024*128 Killed dmesg [ 108.601023] python invoked oom-killer: gfp_mask=0x1280d2, order=0, oomkilladj=0 [ 108.601044] Pid: 1574, comm: python Not tainted 2.6.26-2-xen-686 #1 [ 108.601051] [c0150d96] oom_kill_process+0x4f/0x1bb [ 108.601062] [c0125118] __capable+0x8/0x1b [ 108.601069] [c0151237] out_of_memory+0x14e/0x17f [ 108.601075] [c0153285] __alloc_pages_internal+0x2b8/0x34e [ 108.601085] [c0153327] __alloc_pages+0x7/0x9 [ 108.601090] [c015e83c] handle_mm_fault+0x299/0xda5 [ 108.601097] [c0131916] hrtimer_run_pending+0x19/0xf7 [ 108.601107] [c0126312] run_timer_softirq+0x30/0x1c8 [ 108.601112] [c010eaf3] do_page_fault+0x605/0xb2e [ 108.601121] [c0122e08] do_softirq+0x51/0x76 [ 108.601126] [c0105b05] do_IRQ+0x52/0x65 [ 108.601133] [c023dba3] evtchn_do_upcall+0xfa/0x191 [ 108.601139] [c010e4ee] do_page_fault+0x0/0xb2e [ 108.601145] [c02cc6ad] error_code+0x35/0x3c [ 108.601154] [c02c] setup_cpu_cache+0x4/0x11f [ 108.601163] === [ 108.601166] Mem-info: [ 108.601168] DMA per-cpu: [ 108.601173] CPU0: hi:0, btch: 1 usd: 0 [ 108.601177] Normal per-cpu: [ 108.601180] CPU0: hi: 186, btch: 31 usd: 161 [ 108.601185] HighMem per-cpu: [ 108.601188] CPU0: hi: 186, btch: 31 usd: 97 [ 108.601192] Active:92875 inactive:123 dirty:0 writeback:0 unstable:0 [ 108.601193] free:128300 slab:1223 mapped:0 pagetables:0 bounce:0 [ 108.601202] DMA free:12320kB min:72kB low:88kB high:108kB active:0kB inactive:0kB present:16256kB pages_scanned:0 all_unreclaimable? yes [ 108.601210] lowmem_reserve[]: 0 706 16240 16240 [ 108.601218] Normal free:500372kB min:3364kB low:4204kB high:5044kB active:66296kB inactive:116kB present:723392kB pages_scanned:114955 all_unreclaimable? yes [ 108.601227] lowmem_reserve[]: 0 0 124269 124269 [ 108.601237] HighMem free:508kB min:512kB low:19004kB high:37500kB active:305204kB inactive:376kB present:15906496kB pages_scanned:678120 all_unreclaimable? yes [ 108.601244] lowmem_reserve[]: 0 0 0 0 [ 108.601252] DMA: 0*4kB 2*8kB 1*16kB 0*32kB 2*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 2*4096kB = 12320kB [ 108.601269] Normal: 195*4kB 58*8kB 29*16kB 17*32kB 11*64kB 0*128kB 1*256kB 3*512kB 2*1024kB 3*2048kB 119*4096kB = 500364kB [ 108.601289] HighMem: 2*4kB 13*8kB 2*16kB 1*32kB 1*64kB 0*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 496kB [ 108.601306] 183 total pagecache pages [ 108.601311] Swap cache: add 0, delete 0, find 0/0 [ 108.601315] Free swap = 0kB [ 108.601317] Total swap = 0kB [ 108.636184] 4194304 pages of RAM [ 108.636196] 4007936 pages of HIGHMEM [ 108.636199] 38231 reserved pages [ 108.636201] 69 pages shared [ 108.636203] 0 pages swap cached [ 108.636206] 0 pages dirty [ 108.636208] 0 pages writeback [ 108.636211] 0 pages mapped [ 108.636213] 1223 pages slab [ 108.636215] 0 pages pagetables [ 108.636225] Out of memory: kill process 1574 (python) score 6255 or a child [ 108.636236] Killed process 1574 (python) AFAIK in normal system no OOM shall be when overcommitment is disabled. I recheck behavior on normal kernel and it was fine (just MemoryErrors) from python. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#599772: Acknowledgement (console-setup-udeb: console-setup during preseeded automatic installation ignore preseed values and stop)
I think, this problem can be called 'closed', problem was not in package, but in documentation. For correct preseeding not 'console-setup' shall be used, but 'keyboard-configuration'. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#599728: libclipboard: clash in libclipboard
Package: gnome-settings-daemon Version: 2.30.2-1 Severity: normal File: libclipboard Suddenly, when I close few windows gnome theme changed to ugly default and following line appear in dmesg: [21723.282933] gnome-settings-[2867]: segfault at 8 ip 7f894b88918b sp 7fff4e7bab30 error 4 in libclipboard.so[7f894b886000+6000] -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gnome-settings-daemon depends on: ii gconf2 2.28.1-5GNOME configuration database syste ii libc62.11.2-6Embedded GNU C Library: Shared lib ii libcairo21.8.10-6The Cairo 2D vector graphics libra ii libdbus-1-3 1.2.24-3simple interprocess messaging syst ii libdbus-glib-1-2 0.88-2 simple interprocess messaging syst ii libfontconfig1 2.8.0-2.1 generic font configuration library ii libgconf2-4 2.28.1-5GNOME configuration database syste ii libglib2.0-0 2.24.2-1The GLib library of C routines ii libgnome-desktop-2-172.30.2-1Utility library for loading .deskt ii libgnome2-common 2.30.0-1The GNOME library - common files ii libgnomekbd4 2.30.2-1GNOME library to manage keyboard c ii libgstreamer-plugins-base0.1 0.10.30-1 GStreamer libraries from the base ii libgstreamer0.10-0 0.10.30-1 Core GStreamer libraries and eleme ii libgtk2.0-0 2.20.1-1+b1 The GTK+ graphical user interface ii libnotify1 [libnotify1-gtk2. 0.5.0-2 sends desktop notifications to a n ii libx11-6 2:1.3.3-3 X11 client-side library ii libxi6 2:1.3-4 X11 Input extension library ii libxklavier165.0-2 X Keyboard Extension high-level AP gnome-settings-daemon recommends no packages. Versions of packages gnome-settings-daemon suggests: ii gnome-screensaver 2.30.0-1 GNOME screen saver and locker ii metacity [x-window-manager] 1:2.30.1-3 lightweight GTK+ window manager ii twm [x-window-manager]1:1.0.4-2 Tab window manager ii x11-xserver-utils 7.5+2 X server utilities -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#599772: console-setup-udeb: console-setup during preseeded automatic installation ignore preseed values and stop
Package: console-setup-udeb Version: 1.56 Severity: important Tags: d-i Automated installation with preseed of Squeeze stops at dialogue 'Configure keyboard-keyboard layout'. Even preseed file contain: d-i console-setup/variant select us\ d-i console-setup/layout select us\ (I test it with us and USA values) log file still contains: Menu item 'console-setup-udeb' succeeded but requested to be left unconfigured. I check it with following preseed strings and with kernel args values: layout=USA, layout=us, varian=us, variant=USA, but no success. I think this same bug for Ubutu (confirmed): https://bugs.launchpad.net/ubuntu/+source/console-setup/+bug/512592 -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#599876: python2.6: endless loop with 'no mem for new parser' message when no free memory avaible
Package: python2.6 Version: 2.6.6-6 Severity: minor When linux running with vm.overcommit_memory=2 (overcommit disabled), OOM state could not happen. In this case, it interactive python shell extinct every memory and was unable to allocate memory for own needs it starts to print endlessly MemoryError no mem for new parser I think in this situation it shall simply stop running (terminating or freezing), but not looping in unbreakable loop (no Ctrl-C or Ctrl-Z works). -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages python2.6 depends on: ii libbz2-1.01.0.5-6high-quality block-sorting file co ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib ii libdb4.8 4.8.30-2 Berkeley v4.8 Database Libraries [ ii libexpat1 2.0.1-7XML parsing C library - runtime li ii libncursesw5 5.7+20100313-4 shared libraries for terminal hand ii libreadline6 6.1-3 GNU readline and history libraries ii libsqlite3-0 3.7.2-1SQLite 3 shared library ii mime-support 3.48-1 MIME files 'mime.types' 'mailcap ii python2.6-minimal 2.6.6-6A minimal subset of the Python lan python2.6 recommends no packages. Versions of packages python2.6 suggests: ii binutils 2.20.1-15 The GNU assembler, linker and bina pn python2.6-doc none (no description available) pn python2.6-profilernone (no description available) -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#600242: krusader: function Calculate occuped space unselect last item in selections
Package: krusader Version: 1:2.2.0~beta1-2 Severity: normal Function 'calculate occuped space' (used to see cummulative usage by files in selected folders and their subfolders) if used to some selection disselect (and ignore) last item in selections. Steps to reproduce: Run krusader, go to /var, put cursour on .. call Edit-calculate occupied space, wait until complete click 'ok' Expected behavior: all directories are selected. Actual (wrong) behavior: Last directory is not selected and not counted in function result displayed early. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages krusader depends on: ii kdebase-runtime 4:4.4.5-1runtime components from the offici ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib ii libgcc1 1:4.4.5-2GCC support library ii libkdecore5 4:4.4.5-1the KDE Platform Core Library ii libkdeui5 4:4.4.5-1the KDE Platform User Interface Li ii libkfile4 4:4.4.5-1the File Selection Dialog Library ii libkhtml5 4:4.4.5-1the KHTML Web Content Rendering En ii libkio5 4:4.4.5-1the Network-enabled File Managemen ii libkjsapi4 4:4.4.5-1the KJS API Library for the KDE De ii libkparts4 4:4.4.5-1the Framework for the KDE Platform ii libqt4-dbus 4:4.6.3-3Qt 4 D-Bus module ii libqt4-network 4:4.6.3-3Qt 4 network module ii libqt4-svg 4:4.6.3-3Qt 4 SVG module ii libqt4-xml 4:4.6.3-3Qt 4 XML module ii libqtcore4 4:4.6.3-3Qt 4 core module ii libqtgui4 4:4.6.3-3Qt 4 GUI module ii libsolid4 4:4.4.5-1Solid Library for KDE Platform ii libstdc++6 4.4.5-2 The GNU Standard C++ Library v3 ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime krusader recommends no packages. Versions of packages krusader suggests: pn arjnone(no description available) pn arknone(no description available) ii bzip2 1.0.5-6 high-quality block-sorting file co ii cpio 2.11-4GNU cpio -- a program to manage ar pn kdiff3 | kompare | xxdiff none(no description available) pn kedit none(no description available) pn kmail none(no description available) pn konsolenone(no description available) pn krenamenone(no description available) pn lhanone(no description available) pn md5deep | cfv none(no description available) pn okteta none(no description available) ii p7zip 9.04~dfsg.1-1 7zr file archiver with high compre pn rpmnone(no description available) ii unace 1.2b-7extract, test and view .ace archiv ii unrar 1:3.9.10-1Unarchiver for .rar files (non-fre ii unzip 6.0-4 De-archiver for .zip files ii zip3.0-3 Archiver for .zip files -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#600485: rsstail: Strange error message (Error reading RSS feed: success)
Package: rsstail Version: 1.5-1 Severity: minor rsstail working with other tools in pipe from cron, so I have no more detail information, but cron suddenly send me following output from rsstail: Error reading RSS feed: Success I think this message looks strange. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages rsstail depends on: ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib ii libmrss0 [libmrss-abi-0.19.2] 0.19.2-2 C library for parsing, writing and rsstail recommends no packages. rsstail suggests no packages. -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#600538: Sam__Max_Hit_the_Road: mouse buttons does not work in panoramic view
Package: scummvm Version: 1.1.1-1 Severity: normal In the game Sam__Max_Hit_the_Road when panoramic view used left/right mouse buttons clicks does not work. Save file for panoramic view attached. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages scummvm depends on: ii libasound2 1.0.23-2 shared library for ALSA applicatio ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib ii libflac81.2.1-3 Free Lossless Audio Codec - runtim ii libfluidsynth1 1.1.1-5 Real-time MIDI software synthesize ii libgcc1 1:4.4.5-4GCC support library ii libmad0 0.15.1b-5MPEG audio decoder library ii libogg0 1.2.0~dfsg-1 Ogg bitstream library ii libsdl1.2debian 1.2.14-6.1 Simple DirectMedia Layer ii libstdc++6 4.4.5-4 The GNU Standard C++ Library v3 ii libvorbis0a 1.3.1-1 The Vorbis General Audio Compressi ii libvorbisfile3 1.3.1-1 The Vorbis General Audio Compressi ii scummvm-data1.1.1-1 free implementation of LucasArts' ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime scummvm recommends no packages. Versions of packages scummvm suggests: pn beneath-a-steel-sky none (no description available) pn flight-of-the-amazon-queennone (no description available) pn fluidsynth | timidity none (no description available) -- no debconf information samnmax.s00 Description: GNU Zip compressed data
Bug#585805: gcc-4.3: gcc have no manpages
Package: gcc-4.3 Version: 4.3.2-1.1 Severity: minor gcc command have no man pages (man gcc just report about undocumented). -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (990, 'stable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gcc-4.3 depends on: ii binutils2.18.1~cvs20080103-7 The GNU assembler, linker and bina ii cpp-4.3 4.3.2-1.1The GNU C preprocessor ii gcc-4.3-base4.3.2-1.1The GNU Compiler Collection (base ii libc6 2.11-0exp7 Embedded GNU C Library: Shared lib ii libgcc1 1:4.4.4-1GCC support library ii libgomp14.4.4-1 GCC OpenMP (GOMP) support library Versions of packages gcc-4.3 recommends: ii libc6-dev 2.11-0exp7 Embedded GNU C Library: Developmen Versions of packages gcc-4.3 suggests: pn gcc-4.3-doc none (no description available) pn gcc-4.3-locales none (no description available) pn gcc-4.3-multilib none (no description available) pn libgcc1-dbg none (no description available) pn libgomp1-dbg none (no description available) pn libmudflap0-4.3-dev none (no description available) pn libmudflap0-dbg none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#588756: deluge: moving completed files to home dir if no MoveTo directory exists
Package: deluge Version: 1.2.3+git20100701.131af5a-1 Severity: normal If deluge configured to move completed files from temporary directory to some other directory, and that directory not found, files are moved to ~ (user home directory). -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii deluge-gtk 1.2.3+git20100701.131af5a-1 bittorrent client written in Pytho ii python 2.6.5-5 An interactive high-level object-o deluge recommends no packages. deluge suggests no packages. -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#593274: krusader: Buttons in overwrite dialog moving, depends on filename length
Package: krusader Version: 1:2.2.0~beta1-1 Severity: normal Overwrite dialog (for file move/copy) resize depends on filename size. Due resize buttons move left-right during sequence overwrite requests and cause clicking different buttons without moving mouse pointer. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages krusader depends on: ii kdebase-runtime 4:4.4.5-1runtime components from the offici ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libgcc1 1:4.4.4-8GCC support library ii libkdecore5 4:4.4.5-1the KDE Platform Core Library ii libkdeui5 4:4.4.5-1the KDE Platform User Interface Li ii libkfile4 4:4.4.5-1the File Selection Dialog Library ii libkhtml5 4:4.4.5-1the KHTML Web Content Rendering En ii libkio5 4:4.4.5-1the Network-enabled File Managemen ii libkjsapi4 4:4.4.5-1the KJS API Library for the KDE De ii libkparts4 4:4.4.5-1the Framework for the KDE Platform ii libqt4-dbus 4:4.6.3-1Qt 4 D-Bus module ii libqt4-network 4:4.6.3-1Qt 4 network module ii libqt4-svg 4:4.6.3-1Qt 4 SVG module ii libqt4-xml 4:4.6.3-1Qt 4 XML module ii libqtcore4 4:4.6.3-1Qt 4 core module ii libqtgui4 4:4.6.3-1Qt 4 GUI module ii libsolid4 4:4.4.5-1Solid Library for KDE Platform ii libstdc++6 4.4.4-8 The GNU Standard C++ Library v3 ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime krusader recommends no packages. Versions of packages krusader suggests: pn arjnone(no description available) pn arknone(no description available) ii bzip2 1.0.5-4 high-quality block-sorting file co ii cpio 2.11-4GNU cpio -- a program to manage ar pn kdiff3 | kompare | xxdiff none(no description available) pn kedit none(no description available) pn kmail none(no description available) pn konsolenone(no description available) pn krenamenone(no description available) pn lhanone(no description available) pn md5deep | cfv none(no description available) pn okteta none(no description available) ii p7zip 9.04~dfsg.1-1 7zr file archiver with high compre pn rpmnone(no description available) ii unace 1.2b-7extract, test and view .ace archiv ii unrar 1:3.9.10-1Unarchiver for .rar files (non-fre ii unzip 6.0-4 De-archiver for .zip files ii zip3.0-3 Archiver for .zip files -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#593839: geeqie: Wrong display selection for full-screen mode in dual-head mode
Package: geeqie
Version: 1:1.0-7
Severity: normal
In dual-head configuration geeqie in fullscreen mode ('f' key) use wrong
display (in my case it always second head) and display image 'not fullscreen'
(some of surrounding black area have non-filled area). I use two monitors with
different resolution, and 'second head' is 1920x1050, first is 1680x1050; when
geeqie draw black area on second head it is about 1680x1050 (like first head)
not 1920x1080 (like second one).
My X configuration:
Section ServerLayout
Identifier Default Layout
Screen 0 Samsung 215tw 0 0
InputDeviceGeneric Keyboard
InputDeviceConfigured Mouse
EndSection
Section InputDevice
Identifier Generic Keyboard
Driver kbd
Option CoreKeyboard
Option XkbRules xorg
Option XkbModel pc104
Option XkbLayout us
EndSection
Section InputDevice
Identifier Configured Mouse
Driver mouse
Option CorePointer
Option Device /dev/input/mice
Option Protocol ImPS/2
Option Emulate3Buttons true
EndSection
Section Monitor
Identifier Samsung 215tw
EndSection
Section Device
Identifier GeForce First Head
Driver nvidia
BusID PCI:1:0:0
EndSection
Section Screen
Identifier Samsung 215tw
Device GeForce First Head
MonitorSamsung 215tw
Option TwinView
Option MetaModes 1680x1050, 1920x1080
Option TwinViewOrientation RightOf
Option RandRRotation
EndSection
N.B. Few weeks ago geeqie was fine (and I lost moment it become broken)...
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages geeqie depends on:
ii geeqie-common 1:1.0-7 data files for Geeqie
ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib
ii libexiv2-9 0.20-2 EXIF/IPTC metadata manipulation li
ii libgcc1 1:4.4.4-8GCC support library
ii libglib2.0-02.24.1-1 The GLib library of C routines
ii libgtk2.0-0 2.20.1-1 The GTK+ graphical user interface
ii liblcms11.18.dfsg-1.2+b2 Color management library
ii liblircclient0 0.8.3-5 infra-red remote control support -
ii libpango1.0-0 1.28.1-1 Layout and rendering of internatio
ii libstdc++6 4.4.4-8 The GNU Standard C++ Library v3
Versions of packages geeqie recommends:
ii exiftran 2.07-3transform digital camera jpeg imag
ii exiv2 0.20-2EXIF/IPTC metadata manipulation to
ii imagemagick8:6.6.0.4-2.2 image manipulation programs
ii librsvg2-common2.26.3-1 SAX-based renderer library for SVG
ii ufraw-batch0.16-3+b1 batch importer for raw camera imag
ii zenity 2.30.0-1 Display graphical dialog boxes fro
Versions of packages geeqie suggests:
pn geeqie-dbgnone (no description available)
ii gimp 2.6.10-1 The GNU Image Manipulation Program
pn libjpeg-progs none (no description available)
ii ufraw 0.16-3+b1 standalone importer for raw camera
pn xpaintnone (no description available)
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#586776: krb5-user shall ask to remove /etc/krb5.keytab to allow clean reinstallation
Package: krb5-user Severity: wishlist krb5-user shall ask to removing /etc/krb5.keytab (like krb5-kdc asking to remove KDC database) during purge action to allow clean reinstallation of kerberos system -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/16 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages krb5-user depends on: pn krb5-config none (no description available) ii libc6 2.7-18lenny2 GNU C Library: Shared libraries ii libcomerr2 1.41.3-1 common error description library pn libkadm55 none (no description available) ii libkeyutils11.2-9Linux Key Management Utilities (li ii libkrb531.6.dfsg.4~beta1-5lenny4 MIT Kerberos runtime libraries ii libss2 1.41.3-1 command-line interface parsing lib krb5-user recommends no packages. krb5-user suggests no packages. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#586911: no newline prints after running /etc/init.d/krb5-admin-server
Package: krb5-admin-server Version: 1.6.dfsg.4~beta1-5lenny4 Severity: minor After running /etc/init.d/krb5-admin-server no newline (\n) printed (command prompt apear on same line). -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/16 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages krb5-admin-server depends on: ii debconf [debcon 1.5.24 Debian configuration management sy ii krb5-kdc1.6.dfsg.4~beta1-5lenny4 MIT Kerberos key server (KDC) ii libc6 2.7-18lenny4 GNU C Library: Shared libraries ii libcomerr2 1.41.3-1 common error description library ii libkadm55 1.6.dfsg.4~beta1-5lenny4 MIT Kerberos administration runtim ii libkeyutils11.2-9Linux Key Management Utilities (li ii libkrb531.6.dfsg.4~beta1-5lenny4 MIT Kerberos runtime libraries ii libss2 1.41.3-1 command-line interface parsing lib ii lsb-base3.2-20 Linux Standard Base 3.2 init scrip krb5-admin-server recommends no packages. krb5-admin-server suggests no packages. -- debconf information: * krb5-admin-server/kadmind: true * krb5-admin-server/newrealm: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#583301: krusader: Slow file sorting
Package: krusader Version: 1:2.1.0~beta1-1 Severity: minor When amount of files in directory rise up to few thousands, changing sort order become really slow - more then 5 sec for 3000 files on i7 with 100% load for one of CPUs core during sorting. -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (990, 'stable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages krusader depends on: ii kdebase-runtime4:4.4.3-1 runtime components from the offici ii kdelibs5 4:4.4.3-1 transitional package for the KDE D ii libc6 2.11-0exp7Embedded GNU C Library: Shared lib ii libgcc11:4.4.4-1 GCC support library ii libqt4-dbus4:4.6.2-4 Qt 4 D-Bus module ii libqt4-network 4:4.6.2-4 Qt 4 network module ii libqt4-svg 4:4.6.2-4 Qt 4 SVG module ii libqt4-xml 4:4.6.2-4 Qt 4 XML module ii libqtcore4 4:4.6.2-4 Qt 4 core module ii libqtgui4 4:4.6.2-4 Qt 4 GUI module ii libstdc++6 4.4.4-1 The GNU Standard C++ Library v3 ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime krusader recommends no packages. Versions of packages krusader suggests: ii arj 3.10.22-6 archiver for .arj files pn ark none (no description available) ii bzip21.0.5-1 high-quality block-sorting file co ii cpio 2.9-13 GNU cpio -- a program to manage ar pn kdiff3 | kompare none (no description available) pn keditnone (no description available) pn kmailnone (no description available) ii konsole 4:3.5.9.dfsg.1-6+lenny1 X terminal emulator for KDE pn krename none (no description available) pn lha none (no description available) pn md5deep | cfvnone (no description available) pn okteta none (no description available) ii p7zip4.58~dfsg.1-1 7zr file archiver with high compre ii rpm 4.4.2.3-1 Red Hat package manager ii unace1.2b-7 extract, test and view .ace archiv ii unrar1:3.8.2-1 Unarchiver for .rar files (non-fre ii unzip5.52-12 De-archiver for .zip files ii zip 2.32-1 Archiver for .zip files -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#557022: [Evolution] Bug#557022: evolution: error while converting a mail database while upgrade from lenny to sid version
В Чтв, 19/11/2009 в 07:54 +0100, Yves-Alexis Perez пишет:
On jeu., 2009-11-19 at 04:47 +0300, amarao wrote:
Package: evolution
Version: 2.28.1-2
Severity: important
After upgrading from lenny version (2.22.3.1-1) to current sid version
(2.28.1-2) during local mailbox (mbox format) convertion evolution
trapping. Console
output in attachment.
What do you mean by “evolution trapping”? In the end, does the convert
work?
No, conversion stopped, and evolution terminating with debug output
(attach in previous letter). It repeating every time after running.
I solve problem by removing ~/.evolution directory, but I lost all
locally saved mail ('at this computer' folders and subfolders).
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#556570: too many files opened
I think, I found situation, when problem happens. I got error 'too many files opened' for one of the torrents, and after that (I not sure, that EXACTLY after that) torrents stops to be picked up. I'll now incresize limits for deluge, so, if this problem stops to apear, so this bug is related to fopen error with 'too many files'. (Note: If deluge once 'catch' this error it stops to process files in pickup folder, even new files can be opened due fewer files seeded). -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#536172: Debian #536172 : krusader: Erase file content if file edited after X-server restart
Good day. Sorry for long delay. I recheck problem and successfully repeat incorrect behavior. Steps to reproduce problem: Run Krusader (I use lenny with few packages from sid with default gnome desktop). Edit some file (f.e. ~/test.txt) Close editor Kill X-server (Ctrl-Alt-BkSp) Relogin Run Krusader again (At this time Krusader displays following: Can not talk to klauncher, I think, this is important) Run editor ~/test.txt (Press F4 on file test.txt) (Got empty editor's window and zero-sized ~/test.txt file before doing anything within editor) I use a default Krusader editor: I can not found an process name... Screenshot of editor in attachment. В Чтв, 05/11/2009 в 11:35 +0100, Xavier Vello пишет: Hello I can't reproduce this bug with 2.0.0-1, can you please retest ? What I did : - created a test text file with kate, typed in some text and saved - launched krusader, and opened the file with F4 - modified text - without saving, killed Xorg - restarted X and krusader : the file is unharmed Regards attachment: Screenshot-file:---home-amarao-test.txt - Krusader.png
Bug#552205: Acknowledgement (vlc: VLC does not trying to detect encoding of playlists, downloaded via HTTP)
I test VLC with charset=Windows-1251 in http header (http://desunote.ru/test/channels.m3u ), but VLC ignore it. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#630858: twm: Wrong resolition for dual-screen configuration
Package: twm Version: 1:1.0.6-1 Severity: important On dual-screen configuration (nvidia proprientary driver) twm allows only one resolution in configuration dialog (combined resolution of both monitors), make games hard to play. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (990, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.39-1-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages twm depends on: ii libc6 2.13-7 Embedded GNU C Library: Shared lib ii libice6 2:1.0.7-2 X11 Inter-Client Exchange library ii libsm62:1.2.0-2 X11 Session Management library ii libx11-6 2:1.4.3-2 X11 client-side library ii libxext6 2:1.3.0-3 X11 miscellaneous extension librar ii libxmu6 2:1.1.0-2 X11 miscellaneous utility library ii libxt61:1.1.1-2 X11 toolkit intrinsics library ii menu 2.1.45 generates programs menu for all me twm recommends no packages. twm suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#630908: deluge: Crash if column header is dragged under fluxbox WM
Package: deluge Version: 1.3.2-1 Severity: normal If column header is moved deluge crash with following trace (at the end of letter). Steps to reproduce: 0. Use vnc4server, connect to it via vncviewer, 1. Run fluxbox as WM 1. run deluge with some torrents 2. Try to move header of any column This bug not appear with metacity WM. Traceback: File /usr/lib/python2.6/dist-packages/twisted/internet/base.py, line 793, in runUntilCurrent call.func(*call.args, **call.kw) File /usr/lib/python2.6/dist-packages/deluge/core/torrentmanager.py, line 983, in on_alert_save_resume_data torrent_id = str(alert.handle.info_hash()) exceptions.RuntimeError: invalid torrent handle used The program 'deluge' received an X Window System error. This probably reflects a bug in the program. The error was 'BadMatch (invalid parameter attributes)'. (Details: serial 3297019 error_code 8 request_code 56 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (990, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.39-1-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii deluge-gtk1.3.2-1bittorrent client written in Pytho ii python2.6.6-14 interactive high-level object-orie ii python-libtorrent 0.15.6-1 Python bindings for libtorrent-ras deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#613443: deluge: Stalled state with endless 'checking' state if save-to folder does not exist
Package: deluge Version: 1.3.1-1 Severity: normal If deluge terminated by some event (f.e. reboot) after start it checking file consistency. But if folder for saved torrents does not exists it keep 'checking' state endlessly. How to reproduce: 1) Set 'save to' value to some path. 2) Start downloading torrent with folders within torrent 3) Kill deluge by -9 signal 4) remove 'save to' folder (and, probaly) upper directory [not sure] 5) Start deluge Expected behavior: some kind of error mark for 'bad' torrents. Actual: Got endless 'checking' state without progress bar and 30-40% CPU load P.S. I got this state after mount failure for deluge volume, when my /srv/ catalogue was empty instead /srv/deluge/temp-download. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii deluge-gtk 1.3.1-1 bittorrent client written in Pytho ii python 2.6.6-3+squeeze5 interactive high-level object-orie deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#598077:
I starts wonder if I correctly detect conditions for the bug to appear. I sure it appears but it may be really coming from Bug#613443, not due wrong names... I think bug can be closed: I can reproduce Bug#613443, but unable repeatably reproduce this one. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#614082: e2fsprogs: fsck.ext4 fails with 'Memory allocation failed' message
Package: e2fsprogs Version: 1.41.12-2 Severity: normal I got following message during checking FS (fsck.ext4 -fy): (many thousands FS errors fixed early) ... Inode 169246461, i_blocks is 211670140568577, should be 0. Fix? yes Inode 169246423 has illegal block(s). Clear? yes Illegal block #2 (2914889194) in inode 169246423. CLEARED. Illegal block #7 (3221425160) in inode 169246423. CLEARED. Illegal block #10 (3963578733) in inode 169246423. CLEARED. Illegal block #11 (3770804058) in inode 169246423. CLEARED. Illegal indirect block (2164754208) in inode 169246423. CLEARED. Illegal double indirect block (4118543488) in inode 169246423. CLEARED. Illegal double indirect block (3120627712) in inode 169246423. CLEARED. Illegal double indirect block (2298555701) in inode 169246423. CLEARED. Illegal indirect block (3580183415) in inode 169246423. CLEARED. Illegal indirect block (2538272501) in inode 169246423. CLEARED. Illegal block #4197388 (3120627712) in inode 169246423. CLEARED. Error storing directory block information (inode=169246423, block=0, num=3966024): Memory allocation failed e2fsck: aborted memory: total used free sharedbuffers cached Mem: 819785218275006370352 0 42280 514132 -/+ buffers/cache:12710886926764 Swap:0 0 0 dumpe2fs: Filesystem volume name: media-data Last mounted on: /srv/data Filesystem UUID: 14e2daa4-8fca-472e-a122-06a8fab0a41f Filesystem magic number: 0xEF53 Filesystem revision #:1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options:(none) Filesystem state: clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 469475328 Block count: 1877879808 Reserved block count: 0 Free blocks: 32153724 Free inodes: 469247108 First block: 0 Block size: 4096 Fragment size:4096 Reserved GDT blocks: 576 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 RAID stride: 32751 Flex block group size:16 Filesystem created: Fri Aug 13 23:24:15 2010 Last mount time: Sat Feb 19 16:15:12 2011 Last write time: Sat Feb 19 16:15:56 2011 Mount count: 42 Maximum mount count: 20 Last checked: Wed Aug 18 10:53:33 2010 Check interval: 15552000 (6 months) Next check after: Mon Feb 14 09:53:33 2011 Lifetime writes: 8104 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode:8 Default directory hash: half_md4 Directory Hash Seed: f0a9976d-8c6b-462f-9e94-4e7b2631599b Journal backup: inode blocks Journal features: journal_incompat_revoke Journal size: 128M Journal length: 32768 Journal sequence: 0x00022bf9 Journal start:0 ^C At second retry I watch free and all time have at least 6GiB memory free but got following message again: ... Illegal double indirect block (4219387801) in inode 169345606. CLEARED. Inode 169345606 is too big. Truncate? yes Block #1049612 (1538191935) causes directory to be too big. CLEARED. Error storing directory block information (inode=169345606, block=0, num=305115): Memory allocation failed e2fsck: aborted -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages e2fsprogs depends on: ii e2fslibs 1.41.12-2 ext2/ext3/ext4 file system librari ii libblkid1 2.17.2-9.1 block device id library ii libc6 2.11.2-11 Embedded GNU C Library: Shared lib ii libcomerr21.41.12-2 common error description library ii libss21.41.12-2 command-line interface parsing lib ii libuuid1 2.17.2-9.1 Universally Unique ID library ii util-linux2.17.2-9.1 Miscellaneous system utilities e2fsprogs recommends no packages. Versions of packages e2fsprogs suggests: pn e2fsck-static none (no description available) pn gpart none (no description available) ii parted2.3-5 The GNU Parted disk partition resi -- no debconf information --
Bug#614082: Acknowledgement (e2fsprogs: fsck.ext4 fails with 'Memory allocation failed' message)
And more: Before running tests I was able to mount and use FS, right now I'm getting message during mounting: [ 7855.416191] EXT4-fs (dm-0): ext4_check_descriptors: Checksum for group 768 failed (24562!=0) [ 7855.416198] EXT4-fs (dm-0): group descriptors corrupted! and every fs check One or more block group descriptor checksums are invalid. Fix? yes Group descriptor 768 checksum is invalid. FIXED. Group descriptor 770 checksum is invalid. FIXED. Group descriptor 772 checksum is invalid. FIXED. Group descriptor 774 checksum is invalid. FIXED. Group descriptor 776 checksum is invalid. FIXED. Group descriptor 778 checksum is invalid. FIXED. Group descriptor 780 checksum is invalid. FIXED. Group descriptor 782 checksum is invalid. FIXED. Group descriptor 784 checksum is invalid. FIXED. Group descriptor 786 checksum is invalid. FIXED. Group descriptor 788 checksum is invalid. FIXED. Group descriptor 896 checksum is invalid. FIXED. Group descriptor 15873 checksum is invalid. FIXED. Group descriptor 23040 checksum is invalid. FIXED. Group descriptor 23041 checksum is invalid. FIXED. Group descriptor 23042 checksum is invalid. FIXED. Group descriptor 23043 checksum is invalid. FIXED. Group descriptor 24448 checksum is invalid. FIXED. Group descriptor 25472 checksum is invalid. FIXED. Group descriptor 25477 checksum is invalid. FIXED. Group descriptor 25478 checksum is invalid. FIXED. Group descriptor 25479 checksum is invalid. FIXED. Group descriptor 44290 checksum is invalid. FIXED. Group descriptor 44291 checksum is invalid. FIXED. Group descriptor 44292 checksum is invalid. FIXED. Group descriptor 44293 checksum is invalid. FIXED. media-data contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes ^Cmedia-data: e2fsck canceled. It repeat every time I do fsck... -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#637428: thttpd does not warn about disable in /etc/default when restarting
Package: thttpd Version: 2.25b-11 Severity: minor Thttpd silently do nothing when /etc/default/thttpd is set to 'no'. This is very obscure behavior, default is to issue warning during start/restart operation (like iscsi target). x -- System Information: Debian Release: 6.0.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.34-12-xen (SMP w/8 CPU cores) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/dash Versions of packages thttpd depends on: ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib Versions of packages thttpd recommends: ii logrotate 3.7.8-6Log rotation utility Versions of packages thttpd suggests: pn thttpd-util none (no description available) -- Configuration Files: /etc/default/thttpd changed: ENABLED=yes /etc/thttpd/thttpd.conf changed: port=80 dir=/var/www nochroot symlinks user=www-data cgipat=/cgi-bin/* throttles=/etc/thttpd/throttle.conf logfile=/var/log/thttpd.log -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#637665: linux-image-3.0.0-1-amd64: Usb failing
Package: linux-2.6 Version: 3.0.0-1 Severity: normal After some disk avtivity on SATA disk plugged via USB-SATA: usb 1-6: USB disconnect, device number 3 Main strangeness is that after that disconnections no any new usb devices are detected and traces bellow appear for some (random?) processes. If device unplugged from usb it still appear in device lists: lsusb: ... Bus 001 Device 003: ID 04fc:0c15 Sunplus Technology Co., Ltd SPIF215A SATA bridge ... Replugging to other ports not cause any reaction from system - only reboot helps. -- Package-specific info: ** Version: Linux version 3.0.0-1-amd64 (Debian 3.0.0-1) (b...@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP Sun Jul 24 02:24:44 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=0d8d9d81-e17b-4146-a045-098982bd8f4e ro quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [55560.728166] [a0003df1] ? hub_thread+0x586/0xe9e [usbcore] [55560.728168] [81008032] ? load_TLS+0x7/0xa [55560.728171] [8103aec8] ? mmdrop+0xd/0x1c [55560.728174] [81060083] ? wake_up_bit+0x23/0x23 [55560.728180] [a000386b] ? usb_remote_wakeup+0x2f/0x2f [usbcore] [55560.728187] [a000386b] ? usb_remote_wakeup+0x2f/0x2f [usbcore] [55560.728189] [8105fc0b] ? kthread+0x7a/0x82 [55560.728193] [8133cba4] ? kernel_thread_helper+0x4/0x10 [55560.728195] [8105fb91] ? kthread_worker_fn+0x149/0x149 [55560.728198] [8133cba0] ? gs_change+0x13/0x13 [55560.728242] INFO: task krusader:25834 blocked for more than 120 seconds. [55560.728243] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message. [55560.728245] krusaderD 8801eea497d0 0 25834 1 0x0004 [55560.728249] 8801eea497d0 0082 88022fffb700 8801ca617c88 [55560.728252] 880226da60c0 00012800 8801ca617fd8 8801ca617fd8 [55560.728256] 00012800 8801eea497d0 00012800 00012800 [55560.728259] Call Trace: [55560.728262] [81066feb] ? timekeeping_get_ns+0xd/0x2a [55560.728266] [810b5c70] ? lock_page+0x20/0x20 [55560.728269] [813354f3] ? io_schedule+0x5b/0x75 [55560.728273] [811a6fa1] ? radix_tree_gang_lookup_slot+0x68/0x8a [55560.728276] [810b5c79] ? sleep_on_page+0x9/0x10 [55560.728278] [81335a76] ? __wait_on_bit_lock+0x3c/0x85 [55560.728281] [810b5c4a] ? __lock_page+0x5d/0x63 [55560.728284] [810600ad] ? autoremove_wake_function+0x2a/0x2a [55560.728288] [810bf684] ? lock_page+0x11/0x20 [55560.728290] [810bfc99] ? truncate_inode_pages_range+0x236/0x293 [55560.728294] [8103840a] ? should_resched+0x5/0x24 [55560.728302] [a016bf20] ? ext3_evict_inode+0x36/0x13f [ext3] [55560.728306] [8110e736] ? evict+0x7b/0x119 [55560.728309] [8110e806] ? dispose_list+0x32/0x3c [55560.728312] [8110f3f8] ? evict_inodes+0xcd/0xf0 [55560.728316] [810fd1f5] ? generic_shutdown_super+0x57/0xe2 [55560.728318] [810fd2a0] ? kill_block_super+0x20/0x63 [55560.728321] [8103840a] ? should_resched+0x5/0x24 [55560.728324] [810fd4c7] ? deactivate_locked_super+0x1e/0x48 [55560.728328] [8111c302] ? set_fs_pwd+0x58/0x5f [55560.728332] [810fabec] ? sys_chdir+0x52/0x64 [55560.728335] [8133ba92] ? system_call_fastpath+0x16/0x1b [55680.728041] INFO: task khubd:143 blocked for more than 120 seconds. [55680.728045] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message. [55680.728048] khubd D 880223ceb0e0 0 143 2 0x [55680.728053] 880223ceb0e0 0046 [55680.728058] 880226de7610 00012800 88022348bfd8 88022348bfd8 [55680.728063] 00012800 880223ceb0e0 00012800 00012800 [55680.728067] Call Trace: [55680.728087] [81335939] ? schedule_timeout+0x2d/0xd7 [55680.728093] [8100e28d] ? paravirt_read_tsc+0x5/0x8 [55680.728097] [8100e74a] ? native_sched_clock+0x28/0x30 [55680.728101] [8100e757] ? sched_clock+0x5/0x8 [55680.728104] [81335713] ? wait_for_common+0x9d/0x116 [55680.728108] [8103f0a4] ? try_to_wake_up+0x199/0x199 [55680.728113] [8105fc78] ? kthread_stop+0x65/0xaf [55680.728126] [a0123c35] ? release_everything+0x21/0x92 [usb_storage] [55680.728137] [a000a363] ? usb_unbind_interface+0x5b/0x126 [usbcore] [55680.728142] [8124969b] ? __device_release_driver+0x7f/0xd0 [55680.728145] [81249709] ? device_release_driver+0x1d/0x2b [55680.728147] [812492f8] ? bus_remove_device+0x7c/0x8b [55680.728151] [812471c0] ? device_del+0x129/0x177 [55680.728158] [a00088a6] ? usb_disable_device+0x6a/0x159 [usbcore] [55680.728165]
Bug#637666: xtightvncviewer: xtightvncviwer does not recognise ipv6 addresses in command line
Package: xtightvncviewer Version: 1.3.9-6.2 Severity: normal Tags: ipv6 xtightvncviewer reject to accept command line with ipv6 addresses. Tested: ::1 ::1:5901 0::1:5901 ipv6.google.com:5901 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xtightvncviewer depends on: ii libc6 2.13-16 Embedded GNU C Library: Shared lib ii libice6 2:1.0.7-2X11 Inter-Client Exchange library ii libjpeg62 6b1-2Independent JPEG Group's JPEG runt ii libsm6 2:1.2.0-2X11 Session Management library ii libx11-62:1.4.4-1X11 client-side library ii libxaw7 2:1.0.9-2X11 Athena Widget library ii libxext62:1.3.0-3X11 miscellaneous extension librar ii libxmu6 2:1.1.0-2X11 miscellaneous utility library ii libxpm4 1:3.5.9-1X11 pixmap library ii libxt6 1:1.1.1-2X11 toolkit intrinsics library ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime Versions of packages xtightvncviewer recommends: ii xfonts-base 1:1.0.3standard fonts for X Versions of packages xtightvncviewer suggests: ii ssh 1:5.8p1-7 secure shell client and server (me pn tightvncservernone (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#637798: deluge: sudden crash: 'X window system error'
Package: deluge Version: 1.3.2-1 Severity: normal Suddenly deluge closed without any specific reason with following output: The program 'deluge' received an X Window System error. This probably reflects a bug in the program. The error was 'BadMatch (invalid parameter attributes)'. (Details: serial 8301580 error_code 8 request_code 56 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii deluge-gtk1.3.2-1bittorrent client written in Pytho ii python2.6.7-3interactive high-level object-orie ii python-libtorrent 0.15.6-2 Python bindings for libtorrent-ras deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#638854: ifplugd: Adding fractional delay for -t option
Package: ifplugd
Version: 0.28-18
Severity: wishlist
Tags: patch
Right now minimal delay interface poll (-t option) is 1 second. This is fine
in case of 'notebook' usage. We deploing ifplugd as monitorig tool for
heartbeat network and we expected to have smaller polling delay. I've added new
option -T which fill tv.useconds field and allow to use ifplugd with fractional
values. Typical usage is ifplugd -d 0 -t 0 -T 1000 -r /opt/monitor.
This option does not break in any way existing functionality (incuding trimming
all incorrect values for -t to zero) and allow new usage of same code.
-- Package-specific info:
/sys/class/net/ interfaces:
/sys/class/net/eth0/
/sys/class/net/eth1/
/sys/class/net/eth2/
/sys/class/net/eth3/
/sys/class/net/lo/
-- System Information:
Debian Release: wheezy/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'unstable'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages ifplugd depends on:
ii debconf [debconf-2.0] 1.5.41 Debian configuration management sy
ii libc6 2.13-11Embedded GNU C Library: Shared lib
ii libdaemon00.14-2 lightweight C library for daemons
ii lsb-base 3.2-27 Linux Standard Base 3.2 init scrip
Versions of packages ifplugd recommends:
ii ifupdown 0.7~alpha5+really0.6.10 high level tools to configure netw
Versions of packages ifplugd suggests:
pn wpasupplicant none (no description available)
-- debconf information excluded
#! /bin/sh /usr/share/dpatch/dpatch-run
## 07_add_fractional_delays.dpatch by root@cvt-xs6
##
## All lines beginning with `## DP:' are a description of the patch.
## DP: No description.
@DPATCH@
diff -urNad '--exclude=CVS' '--exclude=.svn' '--exclude=.git' '--exclude=.arch' '--exclude=.hg' '--exclude=_darcs' '--exclude=.bzr' ifplugd-0.28~/man/ifplugd.8 ifplugd-0.28/man/ifplugd.8
--- ifplugd-0.28~/man/ifplugd.8 2011-08-22 17:20:53.0 +0400
+++ ifplugd-0.28/man/ifplugd.8 2011-08-22 17:22:09.0 +0400
@@ -48,6 +48,9 @@
\fB\-t | \-\-poll-time=\f1 \fISECS\f1
Specify poll time in seconds (default: 1)
.TP
+\fB\-T | \-\-poll-utime=\f1 \fIUSECS\f1
+Specify poll time in microseconds, added to -t (default: 0)
+.TP
\fB\-u | \-\-delay-up=\f1 \fISECS\f1
Specify delay for configuring interface (default: 0)
.TP
diff -urNad '--exclude=CVS' '--exclude=.svn' '--exclude=.git' '--exclude=.arch' '--exclude=.hg' '--exclude=_darcs' '--exclude=.bzr' ifplugd-0.28~/man/ifplugd.8.xml.in ifplugd-0.28/man/ifplugd.8.xml.in
--- ifplugd-0.28~/man/ifplugd.8.xml.in 2011-08-22 17:20:53.0 +0400
+++ ifplugd-0.28/man/ifplugd.8.xml.in 2011-08-22 17:20:53.0 +0400
@@ -132,6 +132,13 @@
Specify poll time in seconds (default: 1)
/p/optdesc
/option
+
+ option
+ popt-T | --poll-utime=/opt argUSECS/arg/p
+ optdescp
+ Specify poll time in useconds, summing with -t (default: 1)
+ /p/optdesc
+ /option
option
popt-u | --delay-up=/opt argSECS/arg/p
diff -urNad '--exclude=CVS' '--exclude=.svn' '--exclude=.git' '--exclude=.arch' '--exclude=.hg' '--exclude=_darcs' '--exclude=.bzr' ifplugd-0.28~/src/ifplugd.c ifplugd-0.28/src/ifplugd.c
--- ifplugd-0.28~/src/ifplugd.c 2011-08-22 17:20:53.0 +0400
+++ ifplugd-0.28/src/ifplugd.c 2011-08-22 17:20:53.0 +0400
@@ -68,6 +68,7 @@
char *extra_arg = NULL;
int polltime = 1,
+pollutime = 0,
delay_up = 0,
delay_down = 5;
@@ -483,7 +484,7 @@
struct timeval tv;
tv.tv_sec = polltime;
-tv.tv_usec = 0;
+tv.tv_usec = pollutime;
if (t) {
int delay = t - time(NULL);
@@ -664,6 +665,7 @@
-r --run=EXEC Specify program to execute (%s)\n
-I --ignore-retvalDon't exit on nonzero return value of program executed (%s)\n
-t --poll-time=SECS Specify poll time in seconds (%i)\n
+ -T --poll-utime=USECS Specify poll time in microseconds, add to -t (%i)\n
-u --delay-up=SECSSpecify delay for configuring interface (%i)\n
-d --delay-down=SECS Specify delay for deconfiguring interface (%i)\n
-m --api-mode=MODEForce API mode (mii, priv, ethtool, wlan, auto) (%s)\n
@@ -694,6 +696,7 @@
run,
ignore_retval ? on : off,
polltime,
+ pollutime,
delay_up,
delay_down,
m,
@@ -719,6 +722,7 @@
{iface,required_argument, 0, 'i'},
{run, required_argument, 0, 'r'},
{poll-time,required_argument, 0, 't'},
+{poll-utime, required_argument, 0, 'T'},
{delay-up,
Bug#642206: Wrong path to executable in /etc/init.d/openvswitch-controller
Package: openvswitch-controller Version: 1.2.1-3 Severity: important Tags: patch Line in /etc/init.d/openvswitch-controller DAEMON=/usr/sbin/ovs-controller # Introduce the server's location here is wrong, ovs-controller binary located in /usr/bin. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages openvswitch-controller depends on: ii libc6 2.13-21 ii libssl1.0.0 1.0.0e-2 ii openvswitch-common 1.2.1-3 ii openvswitch-pki 1.2.1-3 openvswitch-controller recommends no packages. openvswitch-controller suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#642809: freedroidrpg: If MS Emissary killed before talking to Singulariry, there is no way to solve quest peacfully
Package: freedroidrpg Version: 0.14.1-1 Severity: normal In the quest Obtaining toolbox if MS Emissary (and other hostle bots) killed before talking to Singularity, Singularity does not give option to report success except killing Singularity in non hostle-mode. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages freedroidrpg depends on: ii freedroidrpg-data 0.14.1-1 ii libc6 2.13-21 ii libgl1-mesa-glx [libgl1] 7.11-5 ii libjpeg62 6b1-2 ii libogg0 1.2.2~dfsg-1 ii libpng12-01.2.46-3 ii libsdl-image1.2 1.2.10-2.1 ii libsdl-mixer1.2 1.2.8-6.3 ii libsdl1.2debian 1.2.14-6.4 ii libvorbis0a 1.3.2-1 ii zlib1g1:1.2.3.4.dfsg-3 freedroidrpg recommends no packages. freedroidrpg suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#636157: iscsitarget-dkms: wrong dependences on linux-headers-2.6
Package: iscsitarget-dkms Version: 1.4.20.2-5 Severity: minor iscsitarget-dkms have dependence only on linux-headers-2.6, ignoring linux-headers-3.0 -- System Information: Debian Release: wheezy/sid APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages iscsitarget-dkms depends on: ii dkms 2.2.0.2-1 Dynamic Kernel Module Support Fram ii make 3.81-8.1 An utility for Directing compilati Versions of packages iscsitarget-dkms recommends: pn linux-headers-2.6 none (no description available) iscsitarget-dkms suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#600538: Sam__Max_Hit_the_Road: mouse buttons does not work in panoramic view
Oops, thats gonna be hard. I'll try to run it under dosemu/dosbox to see... As far as I remember from my childhood, when characters got information about location (like 'left to volcano, right to the mountain') using left/right key or esc - I don't remember, shall add new location to global map. В Вск, 29/05/2011 в 18:31 +0200, Moritz Muehlenhoff пишет: On Tue, Jan 04, 2011 at 03:53:53AM +0300, George Shuklin wrote: Good day. Tested on 1.2.1-2 - same problem. Any control keys except 'Esc' is ignored in panoramic view (which make game unsolvable). OK, I've now had a chance to test it with a copy of Sam Max. Indeed, Escape is the only key usable. What happened in the original DOS version of the game, are you required to perform anything specific when using the panoramic view? Cheers, Moritz -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#635235: iscsitarget-dkms: version 1.4.20 does not compile with kernel 2.6.39-2
Package: iscsitarget-dkms Version: 1.4.20.2-4 Severity: grave Justification: renders package unusable dkms does not compile iscsi-target kernel module: DKMS make.log for iscsitarget-1.4.20.2 for kernel 2.6.39-2-amd64 (x86_64) Sun Jul 24 09:14:22 MSK 2011 make: Entering directory `/usr/src/linux-headers-2.6.39-2-amd64' LD /var/lib/dkms/iscsitarget/1.4.20.2/build/built-in.o LD /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/built-in.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/tio.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/iscsi.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/nthread.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.o /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.c: In function ‘worker_thread’: /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.c:75: error: implicit declaration of function ‘copy_io_context’ make[4]: *** [/var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.o] Error 1 make[3]: *** [/var/lib/dkms/iscsitarget/1.4.20.2/build/kernel] Error 2 make[2]: *** [_module_/var/lib/dkms/iscsitarget/1.4.20.2/build] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 make: Leaving directory `/usr/src/linux-headers-2.6.39-2-amd64' -- System Information: Debian Release: wheezy/sid APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.39-2-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages iscsitarget-dkms depends on: ii dkms 2.2.0.2-1 Dynamic Kernel Module Support Fram ii make 3.81-8.1 An utility for Directing compilati iscsitarget-dkms recommends no packages. iscsitarget-dkms suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#635329: drbd8-utils version does not match kernel module (2.6.39-2)
Package: drbd8-utils Version: 2:8.3.9-1 Severity: normal # /etc/init.d/drbd start DRBD module version: 8.3.10 userland version: 8.3.9 you should upgrade your drbd tools! DRBD module version: 8.3.10 userland version: 8.3.9 you should upgrade your drbd tools! DRBD module version: 8.3.10 userland version: 8.3.9 you should upgrade your drbd tools! -- System Information: Debian Release: wheezy/sid APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.39-2-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages drbd8-utils depends on: ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy ii libc6 2.13-10Embedded GNU C Library: Shared lib drbd8-utils recommends no packages. Versions of packages drbd8-utils suggests: pn heartbeat none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#612962: Exits after a few minutes - probably due to severe memory leak
Package: amule Version: 2.2.6+debian0-9+b1 Followup-For: Bug #612962 Same problem, actually, exists in windows version of emule. Here log from amule during crash with ulimit -s 512000 Now, exiting main app... aMule OnExit: Terminating core. Saving PartFile 130 of 130 All PartFiles Saved. aMule shutdown completed. aMule Version: aMule 2.2.6 using wxGTK2 v2.8.10 Terminated after throwing an instance of 'std::bad_alloc' what(): std::bad_alloc A fatal error has occurred and aMule has crashed. Please assist us in fixing this problem by posting the backtrace below in our 'aMule Crashes' forum and include as much information as possible regarding the circumstances of this crash. The forum is located here: http://forum.amule.org/index.php?board=67.0 If possible, please try to generate a real backtrace of this crash: http://wiki.amule.org/index.php/Backtraces =| BACKTRACE FOLLOWS: |= Current version is: aMule 2.2.6 using wxGTK2 v2.8.10 Running on: Linux 2.6.39-2-amd64 x86_64 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (990, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.39-2-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages amule depends on: ii amule-common2.2.6+debian0-9 common files for the rest of aMule ii libc6 2.13-11 Embedded GNU C Library: Shared lib ii libcrypto++95.6.1-5 General purpose cryptographic libr ii libgcc1 1:4.6.1-4GCC support library ii libgeoip1 1.4.8+dfsg-1 non-DNS IP-to-country resolver lib ii libstdc++6 4.6.1-4 GNU Standard C++ Library v3 ii libupnp31:1.6.6-5.1 Portable SDK for UPnP Devices, ver ii libwxbase2.8-0 2.8.10.1-3.1 wxBase library (runtime) - non-GUI ii libwxgtk2.8-0 2.8.10.1-3.1 wxWidgets Cross-platform C++ GUI t ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime Versions of packages amule recommends: ii amule-utils 2.2.6+debian0-9+b1 utilities for aMule (command-line ii unzip 6.0-5 De-archiver for .zip files Versions of packages amule suggests: pn amule-utils-gui none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#678723: xcp-xapi: vif-interfaces added to database as PIF's
Package: xcp-xapi Version: 1.3.2-6 Severity: normal After some time of rebooting and toolstack restart found very funny output in 'xe pif-lis': xe pif-list params=currently-attached,device device ( RO): vif2.0 currently-attached ( RO): false device ( RO): vif211.0 currently-attached ( RO): false device ( RO): eth1 currently-attached ( RO): true device ( RO): eth1 currently-attached ( RO): true device ( RO): eth0 currently-attached ( RO): true device ( RO): eth0 currently-attached ( RO): true device ( RO): vif9.0 currently-attached ( RO): false I've done some additional research and found it happens on host with incorrect network configuration: ip address configured in /etc/network/interfaces with brutils and network backed was openvswitch. This cause errors with vif plugging to bridge, but same time cause xapi marks those vif's as PIF (physical interfaces). -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xcp-xapi depends on: ii hwdata 0.233-1 ii libc6 2.13-33 ii libpam0g 1.1.3-7.1 ii libuuid1 2.20.1-5 ii libvhd02.0.90-1 ii libxen-4.1 4.1.2-6 ii libxenstore3.0 4.1.2-6 ii lsb-base 4.1+Debian7 ii pciutils 1:3.1.9-4 ii python 2.7.3~rc2-1 ii python-xenapi 1.3.2-6 ii stunnel4 [stunnel] 3:4.53-1 ii xcp-eliloader 0.1-4 ii xcp-fe 0.5.2-3+b1 ii xcp-networkd 1.3.2-6 ii xcp-squeezed 1.3.2-6 ii xcp-storage-managers 0.1.1-2 ii xcp-v6d1.3.2-6 ii xcp-xe 1.3.2-6 ii xen-hypervisor-4.1-amd64 [xen-hypervisor-4.1] 4.1.2-6 ii xen-utils-4.1 4.1.2-6 ii zlib1g 1:1.2.7.dfsg-11 Versions of packages xcp-xapi recommends: ii cifs-utils 2:5.5-1 ii xcp-guest-templates 0.1-3 ii xcp-vncterm 0.1-2 xcp-xapi suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#677509: Acknowledgement (xcp-xapi: migration of PV linux does not produce grace ARP)
On 14.06.2012 15:48, Debian Bug Tracking System wrote: After migration of 'idle' (doning nothing) virtual machine it stops to reply to ping for long time. OK, sorry, it was error in second host configuration. Migration works fine with linux-3.2 Bug may (should?) be closed as invalid. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#678923: xcp-xapi: host-disable and host-reboot make host disable forever
Package: xcp-xapi Version: 1.3.2-6 Severity: important I done normal reboot: xe host-disable host=this_host xe host-reboot host=this_host After reboot host stays in 'disable' state and when I've tried to make it enable I got: xe host-enable uuid=ab523ee3-0546-5400-e2db-32f340292fff The specified host is disabled and cannot be re-enabled until after it has rebooted. host: unknown I've reboot host again, but again it stays 'disabled' no matter what I do (xcp restart, master restart and so on). (this_host is a slave in two hosts pool). -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xcp-xapi depends on: ii hwdata 0.233-1 ii libc6 2.13-33 ii libpam0g 1.1.3-7.1 ii libuuid1 2.20.1-5 ii libvhd02.0.90-1 ii libxen-4.1 4.1.2-6 ii libxenstore3.0 4.1.2-6 ii lsb-base 4.1+Debian7 ii pciutils 1:3.1.9-4 ii python 2.7.3~rc2-1 ii python-xenapi 1.3.2-6 ii stunnel4 [stunnel] 3:4.53-1 ii xcp-eliloader 0.1-4 ii xcp-fe 0.5.2-3+b1 ii xcp-networkd 1.3.2-6 ii xcp-squeezed 1.3.2-6 ii xcp-storage-managers 0.1.1-2 ii xcp-v6d1.3.2-6 ii xcp-xe 1.3.2-6 ii xen-hypervisor-4.1-amd64 [xen-hypervisor-4.1] 4.1.2-6 ii xen-utils-4.1 4.1.2-6 ii zlib1g 1:1.2.7.dfsg-11 Versions of packages xcp-xapi recommends: ii cifs-utils 2:5.5-1 ii xcp-guest-templates 0.1-3 ii xcp-vncterm 0.1-2 xcp-xapi suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#679636: rawtherapee: Crash with std::bad_alloc
Package: rawtherapee Version: 4.0.9-3 Severity: important Dear Maintainer, *** Please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these lines *** After switching to any directory with images crashes with following messages: (rawtherapee:12249): glibmm-ERROR **: unhandled exception (type std::exception) in signal handler: what: std::bad_alloc In gdb: Program received signal SIGTRAP, Trace/breakpoint trap. [Switching to Thread 0x7fffe6112700 (LWP 12482)] 0x77220341 in g_logv () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 bt: #0 0x77220341 in g_logv () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #1 0x772204d2 in g_log () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #2 0x76da3bcb in Glib::exception_handlers_invoke() () from /usr/lib/x86_64-linux-gnu/libglibmm-2.4.so.1 #3 0x76daa123 in ?? () from /usr/lib/x86_64-linux-gnu/libglibmm-2.4.so.1 #4 0x7723c5f2 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #5 0x7723bdf5 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #6 0x73b4cb50 in start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0 #7 0x738976dd in clone () from /lib/x86_64-linux-gnu/libc.so.6 #8 0x in ?? () -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (990, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.4-trunk-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages rawtherapee depends on: ii libatkmm-1.6-1 2.22.6-1 ii libbz2-1.0 1.0.6-3 ii libc6 2.13-33 ii libcairomm-1.0-11.10.0-1 ii libexpat1 2.1.0-1 ii libgcc1 1:4.7.1-2 ii libglib2.0-02.32.3-1 ii libglibmm-2.4-1c2a 2.32.0-1 ii libgomp14.7.1-2 ii libgtk2.0-0 2.24.10-1 ii libgtkmm-2.4-1c2a 1:2.24.2-1 ii libiptcdata01.0.4-3 ii libjpeg88d-1 ii liblcms2-2 2.2+git20110628-2.2 ii libpangomm-1.4-12.28.4-1 ii libpng12-0 1.2.49-1 ii libsigc++-2.0-0c2a 2.2.10-0.2 ii libstdc++6 4.7.1-2 ii libtiff43.9.6-5 ii rawtherapee-data4.0.9-3 rawtherapee recommends no packages. rawtherapee suggests no packages. -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#679636:
Found the reason: no free space in /home. More exact bugreport: rawtherapee crashes if no free disk space (not sure home or directory opened). -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#678923: (no subject)
I was wrong, that bug persists in 1.3.2-7 I've recheck it on clean installation: xe host-disable; xe host-reboot After reboot do not enable host back and manual attempt is rejected: xe host-enable uuid=6510efef-2063-b32c-2169-870bde43406a The specified host is disabled and cannot be re-enabled until after it has rebooted. host: unknown -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680102: xcp-xapi: xcp fails eject host from pool (no /etc/firstboot.d found)
Package: xcp-xapi Version: 1.3.2-7 Severity: normal xcp-xapi fails to eject host from pool with following error: xe pool-eject host-uuid=a6806a39-442d-f17d-b7a0-59161d18f56f WARNING: Ejecting a host from the pool will reinitialise that host's local SRs. WARNING: Any data contained with the local SRs will be lost. Type 'yes' to continue yes The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem. message: Unix.Unix_error(20, open, /etc/firstboot.d/data/a8de56d0-b2f1-1e07-d2d3-a67d83b69ff3) ls -lad /etc/firstboot.d ls: cannot access /etc/firstboot.d: No such file or directory -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-686-pae (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xcp-xapi depends on: ii hwdata 0.233-1 ii libc6 2.13-34 ii libpam0g 1.1.3-7.1 ii libuuid1 2.20.1-5.1 ii libvhd02.0.90-1 ii libxen-4.1 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4 ii libxenstore3.0 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4 ii lsb-base 4.1+Debian7 ii pciutils 1:3.1.9-5 ii python 2.7.3-1 ii python-xenapi 1.3.2-7 ii stunnel4 [stunnel] 3:4.53-1 ii xcp-eliloader 0.1-4 ii xcp-fe 0.5.2-3+b1 ii xcp-networkd 1.3.2-7 ii xcp-squeezed 1.3.2-7 ii xcp-storage-managers 0.1.1-2 ii xcp-v6d1.3.2-7 ii xcp-xe 1.3.2-7 ii xen-hypervisor-4.1-amd64 [xen-hypervi 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4 ii xen-utils-4.1 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4 ii zlib1g 1:1.2.7.dfsg-13 Versions of packages xcp-xapi recommends: ii cifs-utils 2:5.5-1 ii xcp-guest-templates 0.1-3 ii xcp-vncterm 0.1-2 xcp-xapi suggests no packages. -- Configuration Files: /etc/xcp/pool.conf changed: slave:31.186.98.97 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#678923: Acknowledgement (xcp-xapi: host-disable and host-reboot make host disable forever)
I've done some additional research on that bug. Brief bug description: xe host-disable; xe host-reboot make host disabled endlessly after reboot without chances to be enabled: xe host-enable uuid= The specified host is disabled and cannot be re-enabled until after it has rebooted What I found: 1) That settings (host_disabled_until_reboot) is stored in /var/lib/xcp/local.db. Stopping xcp-xapi, removing that file and starting xcp-xapi back works . But ugly hack. 2) That attribute is written during reboot, initiated by xe host-reboot. Question is: what change that value in XCP? xapi or some other startup script? -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680499: xcp-xapi: Http_client.Http_request_rejected during upgrade
Package: xcp-xapi
Version: 1.3.2-8
Severity: minor
During upgrade from 1.3.2-7 to 1.3.2-8 got follwing message on slave host
(upgrade was simulatanious on slave and master):
...
Setting up xcp-xapi (1.3.2-8) ...
The server failed to handle your request, due to an internal error. The given
message may give details useful for debugging the problem.
message: INTERNAL_ERROR: [ Http_client.Http_request_rejected({ frame = false;
method = POST; uri = /; query = [ ]; content_length = [ ]; transfer encoding
= ; version = 1.0; cookie = [ ]; task = ; subtask_of = ; content-type = ;
user_agent = xen-api-libs/1.0 }) ]
Processing triggers for menu ...
...
This message was generated bacause xapi takes some time to reinitialize and
resync with slave after restart.
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xcp-xapi depends on:
ii hwdata 0.233-1
ii libc6 2.13-34
ii libpam0g 1.1.3-7.1
ii libuuid1 2.20.1-5.1
ii libvhd02.0.90-1
ii libxen-4.1 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii libxenstore3.0 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii lsb-base 4.1+Debian7
ii pciutils 1:3.1.9-5
ii python 2.7.3-1
ii python-xenapi 1.3.2-8
ii stunnel4 [stunnel] 3:4.53-1
ii xcp-eliloader 0.1-4
ii xcp-fe 0.5.2-3+b1
ii xcp-networkd 1.3.2-8
ii xcp-squeezed 1.3.2-8
ii xcp-storage-managers 0.1.1-2
ii xcp-v6d1.3.2-8
ii xcp-xe 1.3.2-8
ii xen-hypervisor-4.1-amd64 [xen-hypervi 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii xen-utils-4.1 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii zlib1g 1:1.2.7.dfsg-13
Versions of packages xcp-xapi recommends:
ii cifs-utils 2:5.5-1
ii xcp-guest-templates 0.1-3
ii xcp-vncterm 0.1-2
xcp-xapi suggests no packages.
-- Configuration Files:
/etc/xcp/pool.conf changed:
slave:31.186.98.97
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680500: xcp-xe: Tab in autocomple of params for 'xe pif-list params=' erase some arguments
Package: xcp-xe
Version: 1.3.2-8
Severity: minor
When autocomplete for bash is activated following misbehavior happens:
xe pif-list params=device,m[Tab]
expected behavior:
autocomplete to xe pif-list params=device,management
actual behavior:
xe pif-list params=management
('device' removed)
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xcp-xe depends on:
ii libc6 2.13-34
xcp-xe recommends no packages.
xcp-xe suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680511: xcp-xe: autocomplete for sr-probe type=nfs does not provide hints for device-config
Package: xcp-xe Version: 1.3.2-8 Severity: minor XCP 0.5,1.0 and 1.1 provides hints for device-config depends on type field in sr-probe, xcp-xapi (xcp-xe) does not. Difference: XCP 1.1 behavior: xe sr-probe type=nfs device-config:[Tab] device-config: device-config:serverpath= device-config:server= xcp-xe behavior: xe sr-probe type=nfs device-config:[Tab] (nothing) Other arguments (outside device-config) is hinted: xe sr-probe type=[Tab] dummy ext fileiso nfs -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-686-pae (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xcp-xe depends on: ii libc6 2.13-34 xcp-xe recommends no packages. xcp-xe suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#678923: [Pkg-xen-devel] Bug#678923: Acknowledgement (xcp-xapi: host-disable and host-reboot make host disable forever)
On 05.07.2012 20:55, Mike McClurg wrote: On Thu, Jul 5, 2012 at 3:21 AM, George Shuklin george.shuk...@gmail.com wrote: I've done some additional research on that bug. Brief bug description: xe host-disable; xe host-reboot make host disabled endlessly after reboot without chances to be enabled: Okay, I think that the problem is that we forgot to call xapi with the -onsystemboot flag in the xcp-xapi.init script. Here is an untested patch that you should be able to manually apply (as in edit the init file by hand) to test if this fixes the issue. I'll push a proper patch to my github soon. Mike diff --git a/debian/xcp-xapi.init b/debian/xcp-xapi.init index 055e17b..b3c5959 100755 --- a/debian/xcp-xapi.init +++ b/debian/xcp-xapi.init @@ -23,7 +23,7 @@ PATH=/sbin:/usr/sbin:/bin:/usr/bin DESC=The XenAPI server NAME=xapi DAEMON=/usr/sbin/$NAME -DAEMON_ARGS=-daemon -writereadyfile $XAPI_STARTUP_COOKIE -writeinitcomplete $XAPI_INIT_COMPLETE_COOKIE +DAEMON_ARGS=-daemon -writereadyfile $XAPI_STARTUP_COOKIE -writeinitcomplete $XAPI_INIT_COMPLETE_COOKIE -onsystemboot PIDFILE=/var/run/$NAME.pid SCRIPTNAME=/etc/init.d/$NAME TEMPLATES_MD5_STAMP=/var/lib/xcp/templates.md5 Yes, this patch fixes the problem. Thank you. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680528: xcp-xapi: /etc/init.d/xendomains cause xapi to hand during boot
Package: xcp-xapi
Version: 1.3.2-8
Severity: important
During startup /etc/init.d/xendomains script is called. That script is installed
with xen-utils-common witch xcp-xapi is depends on.
That script calls /usr/sbin/xen
as
xen list /dev/null
This 'xen' seems to call xapi:
xen list
^Z
[1]+ Stopped xen list
root@lab-xh3:~# ps f
PID TTY STAT TIME COMMAND
3940 pts/6Ss 0:00 -bash
3982 pts/6T 0:00 \_ /usr/sbin/xapi list
That call is never ends.
I think this is not desired behavior:
1) Script xendomains is provided by xen-utils-common
2) /usr/sbin/xen is provided by xen-utils-common
3) 'list' seems be addressed to xm/xl toolstack (not sure)
4) TOOLSTACK is pointing to xapi.
5) XAPI is not ready to serve 'list' domains and start like it expect to be
'initialized', not queried.
6) Boot process do not finish.
I think disabling of xendomains should be noted in README.Debian, or, better,
checked during installation.
Future, it can be fix to xendomains script to exit if toolstack is xapi.
Not sure is should be reported to xen package as well.
PS Everyone, who affects this problem:
update-rc.d xendomains remove
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xcp-xapi depends on:
ii hwdata 0.233-1
ii libc6 2.13-34
ii libpam0g 1.1.3-7.1
ii libuuid1 2.20.1-5.1
ii libvhd02.0.90-1
ii libxen-4.1 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii libxenstore3.0 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii lsb-base 4.1+Debian7
ii pciutils 1:3.1.9-5
ii python 2.7.3-1
ii python-xenapi 1.3.2-8
ii stunnel4 [stunnel] 3:4.53-1
ii xcp-eliloader 0.1-4
ii xcp-fe 0.5.2-3+b1
ii xcp-networkd 1.3.2-8
ii xcp-squeezed 1.3.2-8
ii xcp-storage-managers 0.1.1-2
ii xcp-v6d1.3.2-8
ii xcp-xe 1.3.2-8
ii xen-hypervisor-4.1-amd64 [xen-hypervi 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii xen-utils-4.1 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii zlib1g 1:1.2.7.dfsg-13
Versions of packages xcp-xapi recommends:
ii cifs-utils 2:5.5-1
ii xcp-guest-templates 0.1-3
ii xcp-vncterm 0.1-2
xcp-xapi suggests no packages.
-- Configuration Files:
/etc/init.d/xcp-xapi changed:
XAPI_INIT_COMPLETE_COOKIE=/var/run/xapi_init_complete.cookie
XAPI_STARTUP_COOKIE=/var/run/xapi_startup.cookie
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC=The XenAPI server
NAME=xapi
DAEMON=/usr/sbin/$NAME
DAEMON_ARGS=-daemon -writereadyfile $XAPI_STARTUP_COOKIE -writeinitcomplete
$XAPI_INIT_COMPLETE_COOKIE -onsystemboot
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
TEMPLATES_MD5_STAMP=/var/lib/xcp/templates.md5
[ -x $DAEMON ] || exit 0
grep hypervisor /proc/cpuinfo /dev/null || exit 0
[ -r /etc/default/$NAME ] . /etc/default/$NAME
[ -r /etc/default/xen ] . /etc/default/xen
. /lib/init/vars.sh
. /lib/lsb/init-functions
if [ ${TOOLSTACK} != xapi ]; then
log_failure_msg Xen toolstack is not set to xapi! Exiting.
exit 0
fi
if [ -f /var/run/xend.pid ]; then
log_failure_msg /var/run/xend.pid exists; ${NAME} conflicts with xend
exit 1
fi
wait_for_xapi() {
MAX_RETRIES=50
RETRY=0
while [ ${RETRY} -lt ${MAX_RETRIES} ]; do
if [ -e ${XAPI_STARTUP_COOKIE} ]; then
return 0
fi
sleep 1
RETRY=$(( ${RETRY} + 1 ))
done
return 1
}
do_start()
{
# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
modprobe xen-netback
modprobe xen-blkback
modprobe blktap
mkdir -p /var/run/xend/boot
mkdir -p /usr/share/xcp/packages/iso
export OCAMLRUNPARAM=b
rm -f $XAPI_STARTUP_COOKIE $XAPI_INIT_COMPLETE_COOKIE
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON
--test /dev/null \
|| return 1
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
$DAEMON_ARGS \
|| return 2
# Add code here, if necessary, that waits for the process to be ready
# to handle requests from services started subsequently which depend
# on this one. As a last
Bug#680588: xcp-xapi: startup race condition between xcp-xapi and xcp-networkd on slave
Package: xcp-xapi
Version: 1.3.2-8
Severity: important
Tags: patch
Found race condition (specific only to slave hosts):
xcp-xapi can start earlier than xcp-networkd due lack of dependency in init.d
script.
Syptoms:
After reboot slave's xcp does not work:
xe (anything):
The host failed to acquire an IP address on its management interface and
therefore cannot contact the master.
log:
/var/log/xcp-xapi.log:[20120707T01:36:51.361Z| warn|lab-xh3|0
thread_zero|bringing up management interface D:065e1b39b653|xapi] Failed to
acquire a management IP address
That bug appears only on slave host.
Patch:
--- /tmp/xcp-xapi 2012-07-07 06:13:47.0 +0400
+++ /etc/init.d/xcp-xapi2012-07-07 06:08:05.0 +0400
@@ -1,7 +1,7 @@
#! /bin/sh
### BEGIN INIT INFO
# Provides: xcp-xapi
-# Required-Start:$remote_fs $syslog xcp-squeezed xcp-v6d xcp-fe
+# Required-Start:$remote_fs $syslog xcp-squeezed xcp-v6d xcp-fe
xcp-networkd
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
(after applying exec 'update-rc.d xcp-xapi defaults')
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xcp-xapi depends on:
ii hwdata 0.233-1
ii libc6 2.13-34
ii libpam0g 1.1.3-7.1
ii libuuid1 2.20.1-5.1
ii libvhd02.0.90-1
ii libxen-4.1 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii libxenstore3.0 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii lsb-base 4.1+Debian7
ii pciutils 1:3.1.9-5
ii python 2.7.3-1
ii python-xenapi 1.3.2-8
ii stunnel4 [stunnel] 3:4.53-1
ii xcp-eliloader 0.1-4
ii xcp-fe 0.5.2-3+b1
ii xcp-networkd 1.3.2-8
ii xcp-squeezed 1.3.2-8
ii xcp-storage-managers 0.1.1-2
ii xcp-v6d1.3.2-8
ii xcp-xe 1.3.2-8
ii xen-hypervisor-4.1-amd64 [xen-hypervi 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii xen-utils-4.1 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii zlib1g 1:1.2.7.dfsg-13
Versions of packages xcp-xapi recommends:
ii cifs-utils 2:5.5-1
ii xcp-guest-templates 0.1-3
ii xcp-vncterm 0.1-2
xcp-xapi suggests no packages.
-- Configuration Files:
/etc/init.d/xcp-xapi changed:
XAPI_INIT_COMPLETE_COOKIE=/var/run/xapi_init_complete.cookie
XAPI_STARTUP_COOKIE=/var/run/xapi_startup.cookie
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC=The XenAPI server
NAME=xapi
DAEMON=/usr/sbin/$NAME
DAEMON_ARGS=-daemon -writereadyfile $XAPI_STARTUP_COOKIE -writeinitcomplete
$XAPI_INIT_COMPLETE_COOKIE -onsystemboot
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
TEMPLATES_MD5_STAMP=/var/lib/xcp/templates.md5
[ -x $DAEMON ] || exit 0
grep hypervisor /proc/cpuinfo /dev/null || exit 0
[ -r /etc/default/$NAME ] . /etc/default/$NAME
[ -r /etc/default/xen ] . /etc/default/xen
. /lib/init/vars.sh
. /lib/lsb/init-functions
if [ ${TOOLSTACK} != xapi ]; then
log_failure_msg Xen toolstack is not set to xapi! Exiting.
exit 0
fi
if [ -f /var/run/xend.pid ]; then
log_failure_msg /var/run/xend.pid exists; ${NAME} conflicts with xend
exit 1
fi
wait_for_xapi() {
MAX_RETRIES=50
RETRY=0
while [ ${RETRY} -lt ${MAX_RETRIES} ]; do
if [ -e ${XAPI_STARTUP_COOKIE} ]; then
return 0
fi
sleep 1
RETRY=$(( ${RETRY} + 1 ))
done
return 1
}
do_start()
{
# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
modprobe xen-netback
modprobe xen-blkback
modprobe blktap
mkdir -p /var/run/xend/boot
mkdir -p /usr/share/xcp/packages/iso
export OCAMLRUNPARAM=b
rm -f $XAPI_STARTUP_COOKIE $XAPI_INIT_COMPLETE_COOKIE
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON
--test /dev/null \
|| return 1
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
$DAEMON_ARGS \
|| return 2
# Add code here, if necessary, that waits for the process to be ready
# to handle requests from services started subsequently which depend
# on this one. As a last resort, sleep for some time.
wait_for_xapi
# Do some standard
Bug#675052: Problem with dynamic memory
Good day. Continue to research that issue. Current state: PV guest, static_min=500MiB, static_max=1GiB, dynamic=800MiB, domid=2 manually create /local/domain/2/control/feature_balloon. Do xe vm-memory-target-set uuid=... target=650MiB squeezed debug: 20120707T03:00:57Z Request for squeezed/balance-memory/3c46cc6a-c1df-deab-1aed-0b0ad939961b 20120707T03:00:57Z listdir /squeezed/rpc/request/balance-memory/3c46cc6a-c1df-deab-1aed-0b0ad939961b [430.86] change_host_free_memory required_mem = 9216 KiB [430.86] total_range = 0 gamma = 1.00 gamma' = inf [430.86] Total additional memory over dynamic_min = 22547476 KiB; will set gamma = 1.00 (leaving unallocated 0 KiB) [430.86] Maximum possible free memory if all active domains balloon down to dynamic_min = 22556692 [430.86] current host free mem = 22556692 KiB (aiming for 9216 KiB);; all domain targets reached; however about to adjust targets; allocation phase [430.86] F22556692 S0 R0 T25156584; 0 T1641472 A1641472 M0 Bxx; 2 T614400 A614400 M614400 Bx^ [430.86] Xenctrl.domain_setmaxmem domid=2 max=665600 (was=614400) [431.87] total_range = 0 gamma = 1.00 gamma' = inf [431.87] Total additional memory over dynamic_min = 22496276 KiB; will set gamma = 1.00 (leaving unallocated 0 KiB) [431.87] Maximum possible free memory if all active domains balloon down to dynamic_min = 22505492 [431.87] current host free mem = 22505492 KiB (aiming for 9216 KiB); cannot allocate enough; all domain targets reached; allocation phase [431.87] F22505492 S0 R0 T25156584; 0 T1641472 A1641472 M0 Bxx; 2 T665600 A665600 M665600 Bxx [431.87] Failed to free 9216 KiB of memory: operation impossible within current dynamic_min limits of balloonable domains [431.87] balance memory caught: Squeeze.Cannot_free_this_much_memory(_, _) I've not completely understand last lines. Host contains more than enough memory: xentop shows 22505492k free for host memory. dom0_mem is about 1.5GiB. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680102: More fixes for xen-api in Wheezy
On 08.07.2012 00:22, Mike McClurg wrote: (CC'ing George Shulkin, and the #680102 bug list) On Sat, Jul 7, 2012 at 4:37 PM, Thomas Goirand tho...@goirand.fr wrote: Hi Mike and Jon, It would be really nice if you could have a look at these 3 pending issues in the Debian bug tracker: #675052: xe vm-memory-target-set does not write target to xenstore #678723: vif-interfaces added to database as PIF's #680102: xcp fails eject host from pool (no /etc/firstboot.d found) It be great to have it fix asap, before the deep freeze of Wheezy. I've been able to fix others already. Other than that, only #680102 is a concern. So 680102 is due to there not being an /etc/firstboot.d/ directory (as the ticket explains). I think we can fix this issue simply by mkdir'ing the directory /etc/firstboot.d/data at some point in xapi's installation. This would allow the pool-eject to proceed, but I think that there might be problems when the host reboots: since none of the firstboot scripts will be called, the host might not reinitialise properly. I think at this point that's all we can hope for. George, can you test that creating the /etc/firstboot.d/data directory gets you past the current exception your having? If this works good enough, let's make this the fix for now. Jon, do you have any other thoughts on this bug? Mike Here results: # mkdir /etc/firstboot.d/ # mkdir /etc/firstboot.d/data # xe pool-eject host-uuid=a6806a39-442d-f17d-b7a0-59161d18f562 WARNING: Ejecting a host from the pool will reinitialise that host's local SRs. WARNING: Any data contained with the local SRs will be lost. Type 'yes' to continue yes The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem. message: Failure(Error while calling xen-cmdline script) log snippet: [20120707T21:55:24.695Z|debug|lab-xh3|699 INET 127.0.0.1:80|pool.eject R:a16c35a5d1d4|xapi] Raised at forkhelpers.ml:181.30-76 - pervasiveext.ml:22.2-9 [20120707T21:55:24.695Z|debug|lab-xh3|699 INET 127.0.0.1:80|pool.eject R:a16c35a5d1d4|backtrace] Raised at pervasives.ml:22.22-33 - list.ml:57.20-23 - xapi_pool.ml:830.9-125 - rbac.ml:229.16-23 [20120707T21:55:24.697Z|debug|lab-xh3|699 INET 127.0.0.1:80|pool.eject R:a16c35a5d1d4|backtrace] Raised at rbac.ml:238.10-15 - server_helpers.ml:72.10-22 [20120707T21:55:24.697Z|debug|lab-xh3|699 INET 127.0.0.1:80|pool.eject R:a16c35a5d1d4|dispatcher] Server_helpers.exec exception_handler: Got exception INTERNAL_ERROR: [ Failure(Error while calling xen-cmdline script) My opinion about 'eject' on debian: 1) Clear running VM's 2) Unplug all VBD 3) Unplug all PIF's but management 4) Wipe /var/lib/xcp/state.db 5) Wipe /var/lib/xcp/local.db 6) Keep only management interface data in /var/xcp/network.db 7) restart all xcp services. During playing with bug lack of '-onsystemboot' flag for xcp I've done that operation many times, seems it working without specific problems. It even works fine without host reboot. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680102: More fixes for xen-api in Wheezy
On 08.07.2012 01:57, Mike McClurg wrote: On Sat, Jul 7, 2012 at 10:40 PM, Thomas Goirandtho...@goirand.fr wrote: On 07/08/2012 04:22 AM, Mike McClurg wrote: So 680102 is due to there not being an /etc/firstboot.d/ directory (as the ticket explains). I think we can fix this issue simply by mkdir'ing the directory /etc/firstboot.d/data at some point in xapi's installation. This would allow the pool-eject to proceed, but I think that there might be problems when the host reboots: since none of the firstboot scripts will be called, the host might not reinitialise properly. Well, writing in /etc dynamically is *forbidden* by the Debian policy. The /etc folder is for configuration, not something else! If you were using /var/lib/xcp-xapi, ok, but not /etc. Could you think about a better way to fix? Sure, we can change what xapi thinks is the firstboot directory. See ocaml/xapi/xapi_globs.ml:593 : let first_boot_dir = /etc/firstboot.d/ We could change that to /var/lib/xcp/firstboot.d. I'd like to know whether creating the /etc/firstboot.d directory will solve the problem though, before we make that change. Very naive question: Why xcp wants to preserve original database? Isn't leaving pool same as 'fresh install' (means db creation). I think situation is somehow differ from XCP ISO where some magic settings was putted by installer inside 'initial database'. For xcp-xapi it is kinda easy, because host is still operational even without xapi. If we preserve networkd settings for management interface, this will allow to perform that operations via ssh without risks to go offline. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680102: More fixes for xen-api in Wheezy
On 08.07.2012 01:57, Mike McClurg wrote: On Sat, Jul 7, 2012 at 10:40 PM, Thomas Goirand tho...@goirand.fr wrote: On 07/08/2012 04:22 AM, Mike McClurg wrote: So 680102 is due to there not being an /etc/firstboot.d/ directory (as the ticket explains). I think we can fix this issue simply by mkdir'ing the directory /etc/firstboot.d/data at some point in xapi's installation. This would allow the pool-eject to proceed, but I think that there might be problems when the host reboots: since none of the firstboot scripts will be called, the host might not reinitialise properly. Well, writing in /etc dynamically is *forbidden* by the Debian policy. The /etc folder is for configuration, not something else! If you were using /var/lib/xcp-xapi, ok, but not /etc. Could you think about a better way to fix? Sure, we can change what xapi thinks is the firstboot directory. See ocaml/xapi/xapi_globs.ml:593 : let first_boot_dir = /etc/firstboot.d/ We could change that to /var/lib/xcp/firstboot.d. I'd like to know whether creating the /etc/firstboot.d directory will solve the problem though, before we make that change. Mike ok, here. note that previous attempt kick away host from pool, but without proper local initialization. Here logs of second attempt (with /etc/firstboot.d/data manually created directory): --- [20120707T22:13:09.973Z| info|lab-xh3|43 UNIX /var/lib/xcp/xapi||cli] xe pool-eject host-uuid=a6806a39-442d-f17d-b7a0-59161d18f562 username=root password=null [20120707T22:13:09.976Z| info|lab-xh3|43 UNIX /var/lib/xcp/xapi|session.login_with_password D:763ae6ae1551|xapi] Session.create trackid=a17abf27963b50ace679a372020f2b32 pool=false uname=root is_local_superuser=true auth_user_sid= parent=trackid=9834f5af41c964e225f24279aefe4e49 [20120707T22:13:09.979Z|error|lab-xh3|43 UNIX /var/lib/xcp/xapi|session.login_with_password D:763ae6ae1551|http] Failed to parse HTTP response status line [] [20120707T22:13:09.998Z| info|lab-xh3|43 UNIX /var/lib/xcp/xapi|session.login_with_password D:763ae6ae1551|xapi] stunnel pid: 19543 (cached = true) connected to 31.186.98.97:443 [20120707T22:13:09.998Z| info|lab-xh3|43 UNIX /var/lib/xcp/xapi|session.login_with_password D:763ae6ae1551|xapi] with_recorded_stunnelpid task_opt=None s_pid=19543 [20120707T22:13:10.001Z| info|lab-xh3|43 UNIX /var/lib/xcp/xapi|session.login_with_password D:763ae6ae1551|xapi] stunnel pid: 19543 (cached = true) returned stunnel to cache [20120707T22:13:10.008Z| info|lab-xh3|43 UNIX /var/lib/xcp/xapi||xapi] stunnel pid: 19546 (cached = false) connected to 31.186.98.97:443 [20120707T22:13:10.008Z| info|lab-xh3|43 UNIX /var/lib/xcp/xapi||xapi] with_recorded_stunnelpid task_opt=None s_pid=19546 [20120707T22:13:11.928Z|debug|lab-xh3|44 INET 127.0.0.1:80||dummytaskhelper] task dispatch:pool.eject D:a101a30f25d9 created by task R:95b3dab5eab2 [20120707T22:13:11.930Z| info|lab-xh3|44 INET 127.0.0.1:80|dispatch:pool.eject D:a101a30f25d9|taskhelper] task pool.eject R:95b3dab5eab2 forwarded (trackid=32a7c19154041cc8c5cfcc3729a5bcab) [20120707T22:13:11.935Z|debug|lab-xh3|44 INET 127.0.0.1:80|pool.eject R:95b3dab5eab2|xapi] Pool.eject: unplugging PBDs [20120707T22:13:11.941Z|error|lab-xh3|44 INET 127.0.0.1:80|pool.eject R:95b3dab5eab2|http] Failed to parse HTTP response status line [] [20120707T22:13:11.959Z| info|lab-xh3|44 INET 127.0.0.1:80|pool.eject R:95b3dab5eab2|xapi] stunnel pid: 19551 (cached = true) connected to 31.186.98.97:443 [20120707T22:13:11.959Z| info|lab-xh3|44 INET 127.0.0.1:80|pool.eject R:95b3dab5eab2|xapi] with_recorded_stunnelpid task_opt=None s_pid=19551 [20120707T22:13:11.989Z|debug|lab-xh3|45 INET 127.0.0.1:80||dummytaskhelper] task dispatch:PBD.unplug D:94efb9464e1f created by task R:65c1b9f31a96 [20120707T22:13:11.991Z| info|lab-xh3|45 INET 127.0.0.1:80|dispatch:PBD.unplug D:94efb9464e1f|taskhelper] task PBD.unplug R:65c1b9f31a96 forwarded (trackid=ec8fd1171c5d74b5ccf47e1f08e5f11e) [20120707T22:13:12.007Z| info|lab-xh3|45 INET 127.0.0.1:80|PBD.unplug R:65c1b9f31a96|storage_impl] SR.detach task:OpaqueRef:65c1b9f3-1a96-27c9-5c16-9ead496f8b5b sr:b9b15e78-c79b-f9b7-4238-d36be14b8075 [20120707T22:13:12.007Z|debug|lab-xh3|45 INET 127.0.0.1:80|PBD.unplug R:65c1b9f31a96|dummytaskhelper] task SR.detach D:cc70741477f6 created by task R:65c1b9f31a96 [20120707T22:13:12.011Z|debug|lab-xh3|45 INET 127.0.0.1:80|SR.detach D:cc70741477f6|sm] SM nfs sr_detach sr=OpaqueRef:a1dda990-6715-497f-2b77-7c52a836c9d0 [20120707T22:13:12.017Z| info|lab-xh3|45 INET 127.0.0.1:80|sm_exec D:0d924d490917|xapi] Session.create trackid=71411412d4436f7fc5c9514d7eee2ea9 pool=false uname= is_local_superuser=true auth_user_sid= parent=trackid=9834f5af41c964e225f24279aefe4e49 [20120707T22:13:12.038Z| info|lab-xh3|45 INET 127.0.0.1:80|sm_exec D:0d924d490917|xapi] stunnel pid: 19556 (cached = true) connected to 31.186.98.97:443 [20120707T22:13:12.038Z| info|lab-xh3|45 INET 127.0.0.1:80|sm_exec
Bug#674161: [Xen-API] Bug#674161: xcp-xapi: 'the device disappeared from xenstore' message during vbd-plug (vm-start)
On 23.05.2012 23:24, George Shuklin wrote: On 23.05.2012 22:44, Dave Scott wrote: xenstore-write /local/domain/0/vm hello Yes, it plugged successfully (at least no error messages). I saw that code in device.ml (where exception was raised), it seems be checking that path in xenstore: (* Sanity check: ensure the backend domain exists *) let _ = try let (_: string) = t.Xst.read (sprintf /local/domain/%d/vm device.backend.domid) in () with Xenbus.Xb.Noent - raise (Device_backend_vanished device) in But even I was successfull, I unable to perform any IO in guest domain (I've get into initrd but I see no /dev/xvd* devices and no messages in dmesg related to new device). I was wrong about this. Workaround 'xenstore-write /local/domain/0/vm something' works and new device is available in guest domain. There is a separate problem with networking I'll report separately. Now but description is looking like this: xcp-xapi package does not write dom0 uuid in xenstore upon startup. This prevents normal device initialization. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#675050: xcp-xapi: /usr/lib/xcp/lib/bin/xe-edit-bootloader uses wrong path to the 'xe'
Package: xcp-xapi Version: 1.3.2-6 Severity: minor Tags: upstream Builin utility for lowlevel vm boot repairment xe-edit-bootloader contains wrong path to xe. IS: XE=/usr/lib/xcp/bin/xe MUST BE: XE=/usr/bin/xe -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xcp-xapi depends on: ii hwdata 0.233-1 ii libc6 2.13-32 ii libpam0g 1.1.3-7.1 ii libuuid1 2.20.1-5 ii libvhd02.0.90-1 ii libxen-4.1 4.1.2-6 ii libxenstore3.0 4.1.2-6 ii lsb-base 4.1+Debian4 ii pciutils 1:3.1.9-3 ii python 2.7.2-10 ii python-xenapi 1.3.2-6 ii stunnel4 [stunnel] 3:4.52-1 ii xcp-eliloader 0.1-4 ii xcp-fe 0.5.2-3+b1 ii xcp-networkd 1.3.2-6 ii xcp-squeezed 1.3.2-6 ii xcp-storage-managers 0.1.1-2 ii xcp-v6d1.3.2-6 ii xcp-xe 1.3.2-6 ii xen-hypervisor-4.1-amd64 [xen-hypervisor-4.1] 4.1.2-6 ii xen-utils-4.1 4.1.2-6 ii zlib1g 1:1.2.7.dfsg-11 Versions of packages xcp-xapi recommends: ii cifs-utils 2:5.4-2 ii xcp-guest-templates 0.1-3 ii xcp-vncterm 0.1-2 xcp-xapi suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#675052: xcp-xapi: xe vm-memory-target-set does not write target to xenstore
Package: xcp-xapi Version: 1.3.2-6 Severity: important Tags: upstream xe vm-memory-target-set does not write new target to /local/domain/ID/memory/target. Balloon in guest domain is expecting this value to be changed to do selfballooning. This breaks 'dynamic memory control' feature. Steps to reproduce: 1) Setup any PV virtual machine with static-memory-min static-memory-max 2) Run it 3) change value of memory target via xe vm-memory-target-set Expected behavior: xenstore /local/domain/X/memory/target set to passed value Actual behavior: no changes in xenstore (compare to boot time values) -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xcp-xapi depends on: ii hwdata 0.233-1 ii libc6 2.13-32 ii libpam0g 1.1.3-7.1 ii libuuid1 2.20.1-5 ii libvhd02.0.90-1 ii libxen-4.1 4.1.2-6 ii libxenstore3.0 4.1.2-6 ii lsb-base 4.1+Debian4 ii pciutils 1:3.1.9-3 ii python 2.7.2-10 ii python-xenapi 1.3.2-6 ii stunnel4 [stunnel] 3:4.52-1 ii xcp-eliloader 0.1-4 ii xcp-fe 0.5.2-3+b1 ii xcp-networkd 1.3.2-6 ii xcp-squeezed 1.3.2-6 ii xcp-storage-managers 0.1.1-2 ii xcp-v6d1.3.2-6 ii xcp-xe 1.3.2-6 ii xen-hypervisor-4.1-amd64 [xen-hypervisor-4.1] 4.1.2-6 ii xen-utils-4.1 4.1.2-6 ii zlib1g 1:1.2.7.dfsg-11 Versions of packages xcp-xapi recommends: ii cifs-utils 2:5.4-2 ii xcp-guest-templates 0.1-3 ii xcp-vncterm 0.1-2 xcp-xapi suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#675055: xcp-xapi: xe-edit-bootloader does not compatible with new /dev/sm
Package: xcp-xapi Version: 1.3.2-6 Severity: normal Tags: upstream /usr/lib/xcp/bin/xe-edit-bootloader failing with following message: /usr/lib/xcp/bin/xe-edit-bootloader -u 19f66083-e776-70d1-1808-3712688ad138 Creating dom0 VBD: 0fdb952e-92ff-4b53-dd49-8d54b2268787 Plugging VBD: Waiting for /dev/sm/backend/4c15ea03-5d70-938e-8265-d5424c0fda5e/963afb9a-9ceb-410f-8554-8be9fb70e7e0: . done Mounting filesystem: failed Partitions in the VDI are: brw--- 1 root root 252, 0 May 29 19:13 /dev/sm/backend/4c15ea03-5d70-938e-8265-d5424c0fda5e/963afb9a-9ceb-410f-8554-8be9fb70e7e0 You can use the -p option to specify a partition number to mount. Unplugging VBD: . done root@lab-xh3:~# /usr/lib/xcp/bin/xe-edit-bootloader -u 19f66083-e776-70d1-1808-3712688ad138 -p 1 Creating dom0 VBD: 445a1179-a947-b884-8cbe-06ea1515ee38 Plugging VBD: Waiting for /dev/sm/backend/4c15ea03-5d70-938e-8265-d5424c0fda5e/963afb9a-9ceb-410f-8554-8be9fb70e7e01: .Device /dev/sm/backend/4c15ea03-5d70-938e-8265-d5424c0fda5e/963afb9a-9ceb-410f-8554-8be9fb70e7e01 not found. Reason is that older model creates /dev/xvd* devices (see message history for bug http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=674088 ) and xe-edit-bootloader just add partition number to device (/dev/xvdb - /dev/xvdb1). With new sm model this is not true: script must call kpartx to probe partition table of attached VDI. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xcp-xapi depends on: ii hwdata 0.233-1 ii libc6 2.13-32 ii libpam0g 1.1.3-7.1 ii libuuid1 2.20.1-5 ii libvhd02.0.90-1 ii libxen-4.1 4.1.2-6 ii libxenstore3.0 4.1.2-6 ii lsb-base 4.1+Debian4 ii pciutils 1:3.1.9-3 ii python 2.7.2-10 ii python-xenapi 1.3.2-6 ii stunnel4 [stunnel] 3:4.52-1 ii xcp-eliloader 0.1-4 ii xcp-fe 0.5.2-3+b1 ii xcp-networkd 1.3.2-6 ii xcp-squeezed 1.3.2-6 ii xcp-storage-managers 0.1.1-2 ii xcp-v6d1.3.2-6 ii xcp-xe 1.3.2-6 ii xen-hypervisor-4.1-amd64 [xen-hypervisor-4.1] 4.1.2-6 ii xen-utils-4.1 4.1.2-6 ii zlib1g 1:1.2.7.dfsg-11 Versions of packages xcp-xapi recommends: ii cifs-utils 2:5.4-2 ii xcp-guest-templates 0.1-3 ii xcp-vncterm 0.1-2 xcp-xapi suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#675157: /etc/init.d/mdadm: 428: /lib/lsb/init-functions: FANCYTTY: parameter not set
Package: mdadm Version: 3.2.4-1 Severity: normal Got following during upgrade: Preparing to replace mdadm 3.2.4-1 (using .../mdadm_3.2.5-1_i386.deb) ... /etc/init.d/mdadm: 428: /lib/lsb/init-functions: FANCYTTY: parameter not set invoke-rc.d: initscript mdadm, action stop failed. dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... /etc/init.d/mdadm: 428: /lib/lsb/init-functions: FANCYTTY: parameter not set invoke-rc.d: initscript mdadm, action stop failed. -- Package-specific info: --- mdadm.conf DEVICE partitions CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST system MAILADDR root ARRAY /dev/md/101 metadata=1.2 UUID=2e027406:57ace60e:4aeb04e1:8fce72e0 name=lab-xh3:101 --- /etc/default/mdadm INITRDSTART='all' AUTOSTART=true AUTOCHECK=true START_DAEMON=true DAEMON_OPTIONS=--syslog VERBOSE=false --- /proc/mdstat: Personalities : [raid10] md101 : active (auto-read-only) raid10 sdb[0] sdc[1] 976761344 blocks super 1.2 2 near-copies [2/2] [UU] unused devices: none --- /proc/partitions: major minor #blocks name 8 32 976762584 sdc 8 16 976762584 sdb 80 976762584 sda 81 970692608 sda1 82 1 sda2 856067200 sda5 9 101 976761344 md101 25208388608 tda --- LVM physical volumes: --- mount output udev on /dev type devtmpfs (rw,relatime,size=430348k,nr_inodes=107587,mode=755) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=88688k,mode=755) /dev/disk/by-uuid/4bbe3509-887c-4f61-ba06-e357e0bfc8c3 on / type ext3 (rw,relatime,errors=remount-ro,barrier=1,data=ordered) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime,size=177376k) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,relatime,size=177376k) rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime) nfsd on /proc/fs/nfsd type nfsd (rw,relatime) xenfs on /proc/xen type xenfs (rw,relatime) 31.186.98.100:/mnt/4c15ea03-5d70-938e-8265-d5424c0fda5e on /run/sr-mount/4c15ea03-5d70-938e-8265-d5424c0fda5e type nfs4 (rw,relatime,sync,vers=4,rsize=131072,wsize=131072,namlen=255,acregmin=0,acregmax=0,acdirmin=0,acdirmax=0,soft,noac,proto=tcp,port=0,timeo=133,retrans=2147483647,sec=sys,clientaddr=31.186.98.100,minorversion=0,local_lock=none,addr=31.186.98.100) --- initrd.img-3.2.0-2-686-pae: 51527 blocks c88568471781f4400db5448321a78a28 ./sbin/mdadm 052c312261576cc3cd64f84fb3dc8cf6 ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/raid10.ko 1a1cdcc1bb7f02b0604014d5061251e5 ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/dm-region-hash.ko 5f4399c057201152b4a7331397c2408f ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/dm-mirror.ko f38c8d3ae566bcb5f805773662224818 ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/dm-snapshot.ko 94ec110b145106714fa944b5bb4e2af0 ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/linear.ko e0be1bb135dae82606e44962d54d9566 ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/multipath.ko eaf60b434276b32c5cf5689dd82fa7ec ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/dm-mod.ko b378c3ae3cad3763c0071d41c7511cb4 ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/raid0.ko b08537a674673ef7c9499f31bcb871ac ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/raid456.ko d1b762d41413a646eb49d1cd70ed6a74 ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/dm-log.ko 505e0ede5bfbd1971cbc35a8a356396c ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/md-mod.ko 97da324d9c36199206eedfca436812ca ./lib/modules/3.2.0-2-686-pae/kernel/drivers/md/raid1.ko f4fbd9099399ab08ba9b9f6c71d77595 ./scripts/local-top/mdadm 1cebd054281e57824a0f15d3abaf9ad9 ./etc/mdadm/mdadm.conf --- initrd's /conf/conf.d/md: MD_HOMEHOST='lab-xh3' MD_DEVPAIRS='/dev/md/101:raid10' MD_LEVELS='raid10' MD_DEVS=all MD_MODULES='raid10' --- /proc/modules: dm_mod 57278 0 - Live 0xf66a3000 raid10 30331 1 - Live 0xf66d1000 md_mod 85719 1 raid10, Live 0xf000 --- /var/log/syslog: --- volume detail: /dev/sda: MBR Magic : aa55 Partition[0] : 1941385216 sectors at 2048 (type 83) Partition[1] : 12134402 sectors at 1941389310 (type 05) -- /dev/sda1 is not recognised by mdadm. /dev/sda2: MBR Magic : aa55 Partition[0] : 12134400 sectors at2 (type 82) -- /dev/sda5 is not recognised by mdadm. /dev/sdb: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 2e027406:57ace60e:4aeb04e1:8fce72e0 Name : lab-xh3:101 (local to host lab-xh3) Creation Time : Mon Mar 19 13:44:16 2012 Raid Level : raid10 Raid Devices : 2 Avail Dev Size : 1953523120 (931.51 GiB 1000.20 GB) Array Size : 976761344 (931.51 GiB 1000.20 GB)
Bug#675050: Acknowledgement (xcp-xapi: /usr/lib/xcp/lib/bin/xe-edit-bootloader uses wrong path to the 'xe')
same for xe-xentrace - wrong xe path. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#675190: BUG: unable to handle kernel paging request at 27c97000 during reboot under xen
Package: linux-2.6 Version: 3.2.18-1 Severity: minor linux 3.22 Ñcrashing during reboot when ran under xcp-xapi toolstack. VM configuration is default, installation is default (netinst) too. -- Package-specific info: ** Version: Linux version 3.2.0-2-686-pae (Debian 3.2.18-1) (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP Mon May 21 18:24:12 UTC 2012 ** Command line: root=UUID=7f4ef707-a7d8-4c30-9932-421bc2ef6b54 ro console=hvc0 quiet -- quiet console=hvc0 ** Not tainted ** Kernel log: [0.038070] installing Xen timer for CPU 7 [0.004000] Initializing CPU#7 [0.038193] NMI watchdog disabled (cpu7): hardware events not enabled [0.038212] Brought up 8 CPUs [0.038322] devtmpfs: initialized [0.038322] Grant table initialized [0.038322] print_constraints: dummy: [0.038322] NET: Registered protocol family 16 [0.344043] SMP alternatives: switching to UP code [0.362591] PCI: setting up Xen PCI frontend stub [0.362594] PCI: pci_cache_line_size set to 64 bytes [0.363041] bio: create slab bio-0 at 0 [0.363092] ACPI: Interpreter disabled. [0.363109] xen/balloon: Initialising balloon driver. [0.377597] xen-balloon: Initialising balloon driver. [0.377597] vgaarb: loaded [0.377597] PCI: System does not support PCI [0.377597] PCI: System does not support PCI [0.377597] Switching to clocksource xen [0.377597] pnp: PnP ACPI: disabled [0.377597] PnPBIOS: Disabled [0.378807] PCI: max bus depth: 0 pci_try_num: 1 [0.378834] NET: Registered protocol family 2 [0.378876] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [0.379015] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [0.379244] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [0.379346] TCP: Hash tables configured (established 131072 bind 65536) [0.379348] TCP reno registered [0.379350] UDP hash table entries: 512 (order: 2, 16384 bytes) [0.379356] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [0.379414] NET: Registered protocol family 1 [0.379420] PCI: CLS 0 bytes, default 64 [0.379451] Unpacking initramfs... [0.425522] Freeing initrd memory: 23440k freed [0.428807] platform rtc_cmos: registered platform RTC device (no PNP device found) [0.428991] audit: initializing netlink socket (disabled) [0.429000] type=2000 audit(1338378007.137:1): initialized [0.449369] highmem bounce pool size: 64 pages [0.449374] HugeTLB registered 2 MB page size, pre-allocated 0 pages [0.449469] VFS: Disk quotas dquot_6.5.2 [0.449495] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [0.449551] msgmni has been set to 1296 [0.449671] alg: No test for stdrng (krng) [0.449689] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [0.449692] io scheduler noop registered [0.449693] io scheduler deadline registered [0.449699] io scheduler cfq registered (default) [0.449743] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [0.449764] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [0.449766] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [0.449856] isapnp: Scanning for PnP cards... [0.801949] isapnp: No Plug Play device found [0.802193] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [0.802432] Linux agpgart interface v0.103 [0.802539] i8042: PNP: No PS/2 controller found. Probing ports directly. [0.803350] i8042: No controller found [0.803404] mousedev: PS/2 mouse device common for all mice [0.843197] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [0.843230] rtc_cmos: probe of rtc_cmos failed with error -38 [0.843389] TCP cubic registered [0.843406] NET: Registered protocol family 10 [0.843758] Mobile IPv6 [0.843760] NET: Registered protocol family 17 [0.843764] Registering the dns_resolver key type [0.843776] Using IPI No-Shortcut mode [0.843853] PM: Hibernation image not present or could not be loaded. [0.843861] registered taskstats version 1 [0.843886] XENBUS: Device with no driver: device/vbd/51712 [0.843888] XENBUS: Device with no driver: device/vif/0 [0.843898] /build/buildd-linux-2.6_3.2.18-1-i386-rwdM7y/linux-2.6-3.2.18/debian/build/source_i386_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [0.843929] Initializing network drop monitor service [0.844180] Freeing unused kernel memory: 412k freed [0.844923] Write protecting the kernel text: 2844k [0.845190] Write protecting the kernel read-only data: 1112k [0.845192] NX-protecting the kernel data: 3300k [0.878430] udevd[88]: starting version 175 [0.903142] Initialising Xen virtual ethernet driver. [0.919416] blkfront: xvda: barrier or flush: disabled [0.920670] xvda: xvda1 xvda2 xvda5 [1.078589] PM: Starting manual resume from disk [
Bug#675190: BUG: unable to handle kernel paging request at 27c97000 during reboot under xen
On 30.05.2012 17:31, Ben Hutchings wrote: A log of the crash would be useful. oops, sorry, forgot to attach. Here: [ ok ] Deactivating swap...done. [info] Will now restart. [ 280.608079] WARNING: g.e. still in use! [ 280.608088] WARNING: g.e. still in use! [ 280.608104] sysfs: kobject eth0 without dirent [ 280.608220] sysfs: kobject eth0 without dirent [ 280.608316] sysfs: kobject eth0 without dirent [ 280.608438] BUG: unable to handle kernel paging request at 27c97000 [ 280.608448] IP: [c1229e86] linkwatch_do_dev+0x8e/0x94 [ 280.608460] *pdpt = 02a8a027 *pde = [ 280.608470] Oops: 0002 [#1] SMP [ 280.608476] Modules linked in: fuse btrfs crc32c libcrc32c zlib_deflate ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs reiserfs ext4 crc16 jbd2 ext2 dm_mod nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop evdev snd_pcm snd_page_alloc snd_timer snd soundcore pcspkr ext3 mbcache jbd xen_blkfront xen_netfront [ 280.608088] WARNING: g.e. still in use! [ 280.608104] sysfs: kobject eth0 without dirent [ 280.608220] sysfs: kobject eth0 without dirent [ 280.608316] sysfs: kobject eth0 without dirent [ 280.608438] BUG: unable to handle kernel paging request at 27c97000 [ 280.608448] IP: [c1229e86] linkwatch_do_dev+0x8e/0x94 [ 280.608460] *pdpt = 02a8a027 *pde = [ 280.608470] Oops: 0002 [#1] SMP [ 280.608476] Modules linked in: fuse btrfs crc32c libcrc32c zlib_deflate ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs reiserfs ext4 crc16 jbd2 ext2 dm_mod nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop evdev snd_pcm snd_page_alloc snd_timer snd soundcore pcspkr ext3 mbcache jbd xen_blkfront xen_netfront [ 280.608526] [ 280.608530] Pid: 60, comm: kworker/0:1 Tainted: GW 3.2.0-2-686-pae #1 [ 280.608538] EIP: 0061:[c1229e86] EFLAGS: 00010246 CPU: 0 [ 280.608544] EIP is at linkwatch_do_dev+0x8e/0x94 [ 280.608548] EAX: EBX: c2958000 ECX: c295826c EDX: e8d1 [ 280.608554] ESI: EDI: c2958000 EBP: e8d11f68 ESP: e8d11f5c [ 280.608559] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0069 [ 280.608565] Process kworker/0:1 (pid: 60, ti=e8d1 task=e8d05620 task.ti=e8d1) [ 280.608572] Stack: [ 280.608575] e8d11f02 c295826c c122a0c3 e8d11f68 e8d11f68 e8c9bdc0 c140ff8c e91165c0 [ 280.608587] e91166c0 c122a110 c1049aef e911b400 c122a0f8 e911b405 e8c9bdc0 [ 280.608598] e91165c0 e8c9bdd0 e8d05620 c104a7fa e8c9bdd0 e8c71f34 e8c9bdc0 c104a751 [ 280.608609] Call Trace: [ 280.608614] [c122a0c3] ? __linkwatch_run_queue+0xe2/0x117 [ 280.608621] [c122a110] ? linkwatch_event+0x18/0x1d [ 280.608628] [c1049aef] ? process_one_work+0x112/0x1fa [ 280.608634] [c122a0f8] ? __linkwatch_run_queue+0x117/0x117 [ 280.608641] [c104a7fa] ? worker_thread+0xa9/0x122 [ 280.608648] [c104a751] ? manage_workers.isra.23+0x13d/0x13d [ 280.608654] [c104d13b] ? kthread+0x63/0x68 [ 280.608660] [c104d0d8] ? kthread_worker_fn+0x101/0x101 [ 280.608667] [c12c5c7e] ? kernel_thread_helper+0x6/0x10 [ 280.608672] Code: f6 83 ec 00 00 00 01 74 1c 8b 43 44 a8 04 89 d8 75 07 e8 b5 7b 00 00 eb 05 e8 99 7d 00 00 89 d8 e8 24 47 ff ff 8b 83 58 02 00 00 64 ff 08 58 5b c3 56 31 d2 53 8b 48 44 80 e1 04 75 29 8b 98 04 [ 280.608729] EIP: [c1229e86] linkwatch_do_dev+0x8e/0x94 SS:ESP 0069:e8d11f5c [ 280.608737] CR2: 27c97000 [ 280.608747] ---[ end trace e490ba182b5fd8cc ]--- [ 280.608774] BUG: unable to handle kernel paging request at fffc [ 280.608781] IP: [c104d2da] kthread_data+0x6/0xa [ 280.608788] *pdpt = 02405027 *pde = [ 280.608796] Oops: [#2] SMP [ 280.608800] Modules linked in: fuse btrfs crc32c libcrc32c zlib_deflate ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs reiserfs ext4 crc16 jbd2 ext2 dm_mod nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop evdev snd_pcm snd_page_alloc snd_timer snd soundcore pcspkr ext3 mbcache jbd xen_blkfront xen_netfront [ 280.608848] [ 280.608852] Pid: 60, comm: kworker/0:1 Tainted: G D W 3.2.0-2-686-pae #1 [ 280.608861] EIP: 0061:[c104d2da] EFLAGS: 00010002 CPU: 0 [ 280.608867] EIP is at kthread_data+0x6/0xa [ 280.608871] EAX: EBX: e8d057d0 ECX: e911aa04 EDX: [ 280.608877] ESI: EDI: e8d05754 EBP: e8d05620 ESP: e8d11dac [ 280.608883] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0069 [ 280.608889] Process kworker/0:1 (pid: 60, ti=e8d1 task=e8d05620 task.ti=e8d1) [ 280.608896] Stack: [ 280.608899] c104aabb e8d057d0 e911a9c0 e8d05754 c12bfa76 e8d11def 000d c13762b7 [ 280.608910] 003c c14839c0 e8d057d0 c14839c0 0001baec e8ce7da4 c105d519 [ 280.608921] e8d60580 e8c00040 e8d60580 c107a6fd c107aee1 e8d05620 e8d05620 [ 280.608933] Call Trace: [ 280.608938] [c104aabb] ? wq_worker_sleeping+0xa/0x5d [ 280.608944] [c12bfa76] ? __schedule+0x101/0x55b [ 280.608950] [c105d519] ? arch_local_irq_disable+0x6/0x7 [ 280.608957]
Bug#677395: xcp-xapi: xe pif-configure-ip does not remove old ip from interface
Package: xcp-xapi Version: 1.3.2-6 Severity: minor Tags: upstream If xe pif-configure-ip called twice with different IP, it did not remove old IP from interface (but didn't store both addresses in database). (Checked for management interface) Steps to reproduce: xe pif-reconfigure-ip uuid=... ip=IP1 xe pif-reconfigure-ip uuid=(same) ip=IP2 ... 'ip addr show' shows both addresses, and after reboot only IP2 is used. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xcp-xapi depends on: ii hwdata 0.233-1 ii libc6 2.13-33 ii libpam0g 1.1.3-7.1 ii libuuid1 2.20.1-5 ii libvhd02.0.90-1 ii libxen-4.1 4.1.2-6 ii libxenstore3.0 4.1.2-6 ii lsb-base 4.1+Debian7 ii pciutils 1:3.1.9-3 ii python 2.7.3~rc2-1 ii python-xenapi 1.3.2-6 ii stunnel4 [stunnel] 3:4.53-1 ii xcp-eliloader 0.1-4 ii xcp-fe 0.5.2-3+b1 ii xcp-networkd 1.3.2-6 ii xcp-squeezed 1.3.2-6 ii xcp-storage-managers 0.1.1-2 ii xcp-v6d1.3.2-6 ii xcp-xe 1.3.2-6 ii xen-hypervisor-4.1-amd64 [xen-hypervisor-4.1] 4.1.2-6 ii xen-utils-4.1 4.1.2-6 ii zlib1g 1:1.2.7.dfsg-11 Versions of packages xcp-xapi recommends: ii cifs-utils 2:5.5-1 ii xcp-guest-templates 0.1-3 ii xcp-vncterm 0.1-2 xcp-xapi suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#677509: xcp-xapi: migration of PV linux does not produce grace ARP
Package: xcp-xapi Version: 1.3.2-6 Severity: important Configuration: Two xcp-xapi hosts (default sid/xcp-xapi installation) in single pool. Network backend is bridge. After migration of 'idle' (doning nothing) virtual machine it stops to reply to ping for long time. AFAIK that caused by mac-learning table on upper level (hardware) switch, which route all frames to wrong port (ignoring migration). Usually this solved by sending 'grace ARP', allowing switch to learn new port for same MAC address. I'm not sure if guest kernel or virtualization toolstack is response for this. Tested with template 'Debian Squeeze 32', upgraded to sid. Guest kernel: linux-image-3.2.0-2-686-pae -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xcp-xapi depends on: ii hwdata 0.233-1 ii libc6 2.13-33 ii libpam0g 1.1.3-7.1 ii libuuid1 2.20.1-5 ii libvhd02.0.90-1 ii libxen-4.1 4.1.2-6 ii libxenstore3.0 4.1.2-6 ii lsb-base 4.1+Debian7 ii pciutils 1:3.1.9-3 ii python 2.7.3~rc2-1 ii python-xenapi 1.3.2-6 ii stunnel4 [stunnel] 3:4.53-1 ii xcp-eliloader 0.1-4 ii xcp-fe 0.5.2-3+b1 ii xcp-networkd 1.3.2-6 ii xcp-squeezed 1.3.2-6 ii xcp-storage-managers 0.1.1-2 ii xcp-v6d1.3.2-6 ii xcp-xe 1.3.2-6 ii xen-hypervisor-4.1-amd64 [xen-hypervisor-4.1] 4.1.2-6 ii xen-utils-4.1 4.1.2-6 ii zlib1g 1:1.2.7.dfsg-11 Versions of packages xcp-xapi recommends: ii cifs-utils 2:5.5-1 ii xcp-guest-templates 0.1-3 ii xcp-vncterm 0.1-2 xcp-xapi suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#676873: nouveau: VM: trapped read at 0x0000000000 on ch 4 [0x0000a9ac] PGRAPH/VFETCH/00 reason: PT_NOT_PRESENT
В Вск, 10/06/2012 в 04:32 -0500, Jonathan Nieder пишет: George Shuklin wrote: Package: linux-2.6 Version: 3.0.0-6 Is this the same machine as bug#676704? (If so, I prefer to track all symptoms in one place.) Do the VM: trapped read errors happen in 3.0.y only? That kernel is not maintained in Debian --- supported versions are 2.6.32.y, 3.2.y, and 3.4.y at the moment. Symptoms are differ. That time (676704) it was clear kernel panic with blinking LEDs on PS/2 keyboard and trace. This but is differ: system continue to run (even mouse pointer is moving), just picture is completely frozen. I don't know is this same bug or different. And I was able to see it in 3.2.19-1 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#674088: xcp-xapi: vbd-plug to dom0 does not creates /dev/xvd* devices in dom0
Package: xcp-xapi
Version: 1.3.2-6
Severity: normal
Tags: upstream
Normally (in 'iso-based' XCP) is possible to attach VDI to dom0.
That operation usually looks like:
xe vbd-create vdi-uuid=... vm-uuid=(dom0 uuid) device=N
xe vbd-plug
I done those steps in xcp-xapi and got success (no error), but no xvd* device
found.
Here operations log:
# xe vbd-create vdi-uuid=c95af56f-799f-49ad-a64f-82eca3299b50
vm-uuid=d859ed1a-760f-9928-b5be-f0ab1790b15f type=Disk mode=RW device=2
b2e8f7b3-34c4-fe9a-486e-6551b8ba4165
# xe vbd-plug uuid=b2e8f7b3-34c4-fe9a-486e-6551b8ba4165
# ls /dev/xv*
ls: cannot access /dev/xv*: No such file or directory
Data from different logs:
SMlog:
[12866] 2012-05-23 04:23:29.119125 vdi_activate {'sr_uuid':
'42cbc4a3-dae2-e756-d122-01b87ed871c2', 'subtask_of':
'DummyRef:|af7c4611-4409-96e2-ec06-9f4c58a8ec47|VDI.activate', 'vdi_ref':
'OpaqueRef:772f7273-f1a2-c340-89ae-43c3af049f15', 'vdi_on_boot': 'persist',
'args': ['true'], 'vdi_location': 'c95af56f-799f-49ad-a64f-82eca3299b50',
'host_ref': 'OpaqueRef:5005b228-e50d-0d6b-e4f9-8d85794ba15c', 'session_ref':
'OpaqueRef:4a336c86-82a9-1e99-f066-41015d88fec4', 'device_config': {'SRmaster':
'true', 'location': '/mnt'}, 'command': 'vdi_activate', 'vdi_allow_caching':
'false', 'sr_ref': 'OpaqueRef:a979869b-1538-51ff-39ab-3ddafc767cd2',
'vdi_uuid': 'c95af56f-799f-49ad-a64f-82eca3299b50'}
[12866] 2012-05-23 04:23:29.119394 blktap2.activate
[12866] 2012-05-23 04:23:29.119488 lock: acquired
/var/lock/sm/c95af56f-799f-49ad-a64f-82eca3299b50/vdi
[12866] 2012-05-23 04:23:29.119581 Adding tag to:
c95af56f-799f-49ad-a64f-82eca3299b50
[12866] 2012-05-23 04:23:29.133845 Activate lock succeeded
[12866] 2012-05-23 04:23:29.166975 ['/usr/sbin/td-util', 'query', 'vhd',
'-vpf', '/mnt/c95af56f-799f-49ad-a64f-82eca3299b50.vhd']
[12866] 2012-05-23 04:23:29.173445 SUCCESS
[12866] 2012-05-23 04:23:29.206198
PhyLink(/dev/sm/phy/42cbc4a3-dae2-e756-d122-01b87ed871c2/c95af56f-799f-49ad-a64f-82eca3299b50)
- /mnt/c95af56f-799f-49ad-a64f-82eca3299b50.vhd
[12866] 2012-05-23 04:23:29.212017 ['/usr/sbin/tap-ctl', 'allocate']
[12866] 2012-05-23 04:23:29.217046 = 0
[12866] 2012-05-23 04:23:29.223407 ['/usr/sbin/tap-ctl', 'spawn']
[12866] 2012-05-23 04:23:29.231105 = 0
[12866] 2012-05-23 04:23:29.231306 ['/usr/sbin/tap-ctl', 'attach', '-p',
'12901', '-m', '1']
[12866] 2012-05-23 04:23:29.236629 = 0
[12866] 2012-05-23 04:23:29.236851 ['/usr/sbin/tap-ctl', 'open', '-p',
'12901', '-m', '1', '-a', 'vhd:/mnt/c95af56f-799f-49ad-a64f-82eca3299b50.vhd']
[12866] 2012-05-23 04:23:29.245060 = 0
[12866] 2012-05-23 04:23:29.252379 tap.activate: Launched
Tapdisk(vhd:/mnt/c95af56f-799f-49ad-a64f-82eca3299b50.vhd, pid=12901, minor=1,
state=R)
[12866] 2012-05-23 04:23:29.252704
DeviceNode(/dev/sm/backend/42cbc4a3-dae2-e756-d122-01b87ed871c2/c95af56f-799f-49ad-a64f-82eca3299b50)
- /dev/xen/blktap-2/tapdev1
[12866] 2012-05-23 04:23:29.253008 lock: released
/var/lock/sm/c95af56f-799f-49ad-a64f-82eca3299b50/vdi
[12866] 2012-05-23 04:23:29.253116 lock: closed
/var/lock/sm/c95af56f-799f-49ad-a64f-82eca3299b50/vdi
[12866] 2012-05-23 04:23:29.253281 lock: closed
/var/lock/sm/42cbc4a3-dae2-e756-d122-01b87ed871c2/sr
[12866] 2012-05-23 04:23:29.253809 lock: closed
/var/lock/sm/42cbc4a3-dae2-e756-d122-01b87ed871c2/sr
xcp-xapi.log (ex. xensource.log):
[20120523T00:23:28.848Z| info|lab-xh3|1045 UNIX /var/lib/xcp/xapi||cli] xe
vbd-plug uuid=b2e8f7b3-34c4-fe9a-486e-6551b8ba4165 username=root password=null
[20120523T00:23:28.849Z| info|lab-xh3|1045 UNIX
/var/lib/xcp/xapi|session.login_with_password D:5d579e77454e|xapi]
Session.create trackid=f0c22aa371e94e4f976de937c65c5b83 pool=false uname=root
is_local_superuser=true auth_user_sid=
parent=trackid=9834f5af41c964e225f24279aefe4e49
[20120523T00:23:28.850Z|debug|lab-xh3|1045 UNIX
/var/lib/xcp/xapi|session.login_with_password D:5d579e77454e|xapi] Attempting
to open /var/lib/xcp/xapi
[20120523T00:23:28.851Z|debug|lab-xh3|1046 UNIX
/var/lib/xcp/xapi||dummytaskhelper] task dispatch:session.get_uuid
D:62a39592557b created by task D:5d579e77454e
[20120523T00:23:28.857Z|debug|lab-xh3|1045 UNIX /var/lib/xcp/xapi|VBD.plug
R:4db77abb7c5d|audit] VBD.plug: VBD = 'b2e8f7b3-34c4-fe9a-486e-6551b8ba4165'
[20120523T00:23:28.859Z|debug|lab-xh3|1045 UNIX /var/lib/xcp/xapi|VBD.plug
R:4db77abb7c5d|locking_helpers] Acquired lock on VM
OpaqueRef:1f9bb0d8-00d9-7aae-0acd-3bd17952c965 with token 19
[20120523T00:23:28.859Z|debug|lab-xh3|1045 UNIX /var/lib/xcp/xapi|VBD.plug
R:4db77abb7c5d|xapi] vbd_plug: attempting to attach vbd
[20120523T00:23:28.859Z|debug|lab-xh3|1045 UNIX /var/lib/xcp/xapi|VBD.plug
R:4db77abb7c5d|xapi] Attempting to dynamically attach VBD to domid 0
[20120523T00:23:28.859Z|debug|lab-xh3|1045 UNIX /var/lib/xcp/xapi|VBD.plug
R:4db77abb7c5d|xapi] VBD device name 2 interpreted as Xen(2, 0) (hvm = false)
Bug#674161: xcp-xapi: 'the device disappeared from xenstore' message during vbd-plug (vm-start)
Package: xcp-xapi Version: 1.3.2-6 Severity: normal Tags: upstream vbd plug to PV domain cause following error: The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem. message: the device disappeared from xenstore (frontend (domid=4 | kind=vbd | devid=51760); backend (domid=0 | kind=vbd | devid=51760)) (same error occur during normal vm installation/running, but this is too long way and I cut some edges by creating a 'diskless' VM, wich just boot and stops inside in initramfs). Operation log: (preparation - not related to bug) # mkdir /boot/guest # cp /boot/vmlinuz-3.2.0-2-amd64 /boot/initrd.img-3.2.0-2-amd64 /boot/guest/ #(prepare external kernels) # xe vm-install template=Other\ install\ media new-name-label=raw 8a6f56a7-3511-650e-d14b-4dd2a3d9c75d # export vm=8a6f56a7-3511-650e-d14b-4dd2a3d9c75d # xe vm-param-set uuid=$vm HVM-boot-policy= #(disable HVM mode == switch to PV) # xe vm-param-set uuid=$vm PV-bootloader= #(disable eliloader/pygrub - use external kernel) # xe vm-param-set uuid=$vm PV-kernel=/boot/guest/vmlinuz-3.2.0-2-amd64 # xe vm-param-set uuid=$vm PV-ramdisk=/boot/guest/initrd.img-3.2.0-2-amd64 # xe vm-param-set uuid=$vm PV-args=root=/ #(kerel cmdline - to go to initrd) # xe vm-start uuid=$vm (now we got clean vm without network or block devices and we can easily repeat but conditions) # xe sr-create type=file name-label=fileSR device-config:location=/mnt 319f3eaa-d1ba-a81d-acb3-493ecbdaab17 #xe vdi-create type=user virtual-size=2GiB name-label=test sr-uuid=319f3eaa-d1ba-a81d-acb3-493ecbdaab17 8cc62479-e620-4561-a057-2eff0e0b8f8d here bug part starts: xe vbd-create vm-uuid=8a6f56a7-3511-650e-d14b-4dd2a3d9c75d vdi-uuid=8cc62479-e620-4561-a057-2eff0e0b8f8d device=0 716880c9-d6cb-44a8-e5cd-6a68f708c1f9 root@lab-xh3:~# xe vbd-plug uuid=716880c9-d6cb-44a8-e5cd-6a68f708c1f9 The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem. message: the device disappeared from xenstore (frontend (domid=2 | kind=vbd | devid=51712); backend (domid=0 | kind=vbd | devid=51712)) Log file content: [20120523T14:00:23.276Z| info|lab-xh3|74 UNIX /var/lib/xcp/xapi||cli] xe vbd-plug uuid=716880c9-d6cb-44a8-e5cd-6a68f708c1f9 username=root password=null [20120523T14:00:23.278Z| info|lab-xh3|74 UNIX /var/lib/xcp/xapi|session.login_with_password D:0661f1729b93|xapi] Session.create trackid=094bbc269cc3c3ff4fe8b0faadef2ef1 pool=false uname=root is_local_superuser=true auth_user_sid= parent=trackid=9834f5af41c964e225f24279aefe4e49 [20120523T14:00:23.278Z|debug|lab-xh3|74 UNIX /var/lib/xcp/xapi|session.login_with_password D:0661f1729b93|xapi] Attempting to open /var/lib/xcp/xapi [20120523T14:00:23.279Z|debug|lab-xh3|75 UNIX /var/lib/xcp/xapi||dummytaskhelper] task dispatch:session.get_uuid D:f3e45d1e1222 created by task D:0661f1729b93 [20120523T14:00:23.285Z|debug|lab-xh3|74 UNIX /var/lib/xcp/xapi|VBD.plug R:4b5db3df62d8|audit] VBD.plug: VBD = '716880c9-d6cb-44a8-e5cd-6a68f708c1f9' [20120523T14:00:23.289Z|debug|lab-xh3|74 UNIX /var/lib/xcp/xapi|VBD.plug R:4b5db3df62d8|locking_helpers] Acquired lock on VM OpaqueRef:714e30c2-f627-1df7-db85-f543eccca324 with token 3 [20120523T14:00:23.289Z|debug|lab-xh3|74 UNIX /var/lib/xcp/xapi|VBD.plug R:4b5db3df62d8|xapi] vbd_plug: attempting to attach vbd [20120523T14:00:23.289Z|debug|lab-xh3|74 UNIX /var/lib/xcp/xapi|VBD.plug R:4b5db3df62d8|xapi] Attempting to dynamically attach VBD to domid 2 [20120523T14:00:23.290Z|debug|lab-xh3|74 UNIX /var/lib/xcp/xapi|VBD.plug R:4b5db3df62d8|xapi] VBD device name 0 interpreted as Xen(0, 0) (hvm = false) [20120523T14:00:23.290Z|debug|lab-xh3|74 UNIX /var/lib/xcp/xapi|VBD.plug R:4b5db3df62d8|sm] SM file sr_content_type sr=OpaqueRef:90cbfca8-ffca-554a-4809-d85a71dd826c [20120523T14:00:23.292Z| info|lab-xh3|74 UNIX /var/lib/xcp/xapi|sm_exec D:e2722ffdc310|xapi] Session.create trackid=d1fe239f7a7942262e1e1b0d73c8f9dc pool=false uname= is_local_superuser=true auth_user_sid= parent=trackid=9834f5af41c964e225f24279aefe4e49 [20120523T14:00:23.293Z|debug|lab-xh3|74 UNIX /var/lib/xcp/xapi|sm_exec D:e2722ffdc310|xapi] Attempting to open /var/lib/xcp/xapi [20120523T14:00:23.293Z|debug|lab-xh3|76 UNIX /var/lib/xcp/xapi||dummytaskhelper] task dispatch:session.get_uuid D:ca1bcfee9e48 created by task D:e2722ffdc310 [20120523T14:00:23.374Z|debug|lab-xh3|77 UNIX /var/lib/xcp/xapi||dummytaskhelper] task dispatch:host.get_other_config D:f8b4e61f4b2d created by task R:4b5db3df62d8 [20120523T14:00:23.376Z|debug|lab-xh3|77 UNIX /var/lib/xcp/xapi||http_critical] Premature termination of connection! [20120523T14:00:23.382Z| info|lab-xh3|74 UNIX /var/lib/xcp/xapi|sm_exec D:e2722ffdc310|xapi] Session.destroy trackid=d1fe239f7a7942262e1e1b0d73c8f9dc [20120523T14:00:23.383Z| info|lab-xh3|74 UNIX /var/lib/xcp/xapi|VBD.plug R:4b5db3df62d8|storage_impl] VDI.attach
Bug#674161: Acknowledgement (xcp-xapi: 'the device disappeared from xenstore' message during vbd-plug (vm-start))
Found same problem with vif: xe vif-plug uuid=08e34a92-a973-e61d-1d41-2165a3d51073 The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem. message: the device disappeared from xenstore (frontend (domid=5 | kind=vif | devid=0); backend (domid=0 | kind=vif | devid=0)) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#674161: [Xen-API] Bug#674161: xcp-xapi: 'the device disappeared from xenstore' message during vbd-plug (vm-start)
Some more data: Done clean reinstall (now with i386 in dom0), got exactly same error. After some digging around got this (new uuids, same problem): Key logs entries: [20120523T17:50:08.602Z|debug|lab-xh3|249 UNIX /var/lib/xcp/xapi|VM.start R:1c6c2941c565|xenops] Device.Vbd.add (device_number=Xen(0, 0) | params=/dev/sm/backend/357e7a73-ec60-6ae6-fe0d-56ca87d228b2/741cb833-b2c3-4bf7-b724-1295e984f097 | phystype=vhd) [20120523T17:50:08.602Z|debug|lab-xh3|249 UNIX /var/lib/xcp/xapi|VM.start R:1c6c2941c565|xenops] adding device B0[/local/domain/0/backend/vbd/4/51712] F4[/local/domain/4/device/vbd/51712] H[/xapi/4/hotplug/vbd/51712] [20120523T17:50:08.603Z|debug|lab-xh3|249 UNIX /var/lib/xcp/xapi|VM.start R:1c6c2941c565|backtrace] Raised at device.ml:65.10-42 - xst.ml:52.18-23 - xst.ml:55.9-12 - device.ml:497.1-60 - vbdops.ml:102.37-229 - storage_access.ml:516.14-317 - xapi_xenops_errors.ml:79.4-8 [20120523T17:50:08.603Z|debug|lab-xh3|249 UNIX /var/lib/xcp/xapi|VM.start R:1c6c2941c565|xapi] Converting xenops exception (INTERNAL_ERROR: [ Device_common.Device_backend_vanished(_) ]) into nice API internal error I've checked - when I plug vbd to dom0 it works fine, but I can't do it with other domains. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#674161: [Pkg-xen-devel] Bug#674161: [Xen-API] Bug#674161: xcp-xapi: 'the device disappeared from xenstore' message during vbd-plug (vm-start)
On 23.05.2012 22:46, Mike McClurg wrote:
On Wed, May 23, 2012 at 7:10 PM, George Shuklin
george.shuk...@gmail.com wrote:
Some more data:
Done clean reinstall (now with i386 in dom0), got exactly same error.
What SR type are you using? If you are using something other than the
FileSr, can you also attach SMlog from the relevant time period?
Mike
SM is 'file'. SMLog seems be so clean I've thought it is not relevant.
But anyway here it is:
[11241] 2012-05-23 22:54:56.348313 SUCCESS
[11241] 2012-05-23 22:54:56.349302 vdi_attach {'sr_uuid':
'357e7a73-ec60-6ae6-fe0d-56ca87d228b2', 'subtask_of':
'DummyRef:|75bad4bb-a459-1750-e4df-bffd787db49a|VDI.attach', 'vdi_ref':
'OpaqueRef:e893c151-fca2-c408-81be-e0c06fef0139', 'vdi_on_boot':
'persist', 'args': ['true'], 'vdi_location':
'00048fc5-9764-408a-801d-9d9442974c9d', 'host_ref':
'OpaqueRef:2e64a8c9-81be-f152-503b-200861cff9e6', 'session_ref':
'OpaqueRef:546b5c70-209a-8a95-1bfe-b3d268256f8e', 'device_config':
{'SRmaster': 'true', 'location': '/mnt'}, 'command': 'vdi_attach',
'vdi_allow_caching': 'false', 'sr_ref':
'OpaqueRef:ee16513a-2dd5-0306-6ad6-73d9ef2a958d', 'vdi_uuid':
'00048fc5-9764-408a-801d-9d9442974c9d'}
[11241] 2012-05-23 22:54:56.349595 lock: creating lock file
/var/lock/sm/00048fc5-9764-408a-801d-9d9442974c9d/vdi
[11241] 2012-05-23 22:54:56.349816 lock: closed
/var/lock/sm/00048fc5-9764-408a-801d-9d9442974c9d/vdi
[11241] 2012-05-23 22:54:56.349934 lock: released
/var/lock/sm/357e7a73-ec60-6ae6-fe0d-56ca87d228b2/sr
[11241] 2012-05-23 22:54:56.350233 lock: closed
/var/lock/sm/357e7a73-ec60-6ae6-fe0d-56ca87d228b2/sr
[11247] 2012-05-23 22:54:56.439703 lock: acquired
/var/lock/sm/357e7a73-ec60-6ae6-fe0d-56ca87d228b2/sr
[11247] 2012-05-23 22:54:56.439853 ['/usr/sbin/td-util', 'query',
'vhd', '-vpf', '/mnt/00048fc5-9764-408a-801d-9d9442974c9d.vhd']
[11247] 2012-05-23 22:54:56.444958 SUCCESS
[11247] 2012-05-23 22:54:56.445908 lock: released
/var/lock/sm/357e7a73-ec60-6ae6-fe0d-56ca87d228b2/sr
[11247] 2012-05-23 22:54:56.446066 vdi_activate {'sr_uuid':
'357e7a73-ec60-6ae6-fe0d-56ca87d228b2', 'subtask_of':
'DummyRef:|722c4aac-53a1-f480-cb35-4278ae467486|VDI.activate',
'vdi_ref': 'OpaqueRef:e893c151-fca2-c408-81be-e0c06fef0139',
'vdi_on_boot': 'persist', 'args': ['true'], 'vdi_location':
'00048fc5-9764-408a-801d-9d9442974c9d', 'host_ref':
'OpaqueRef:2e64a8c9-81be-f152-503b-200861cff9e6', 'session_ref':
'OpaqueRef:87181fc8-c932-7929-240b-7a2595b8b11f', 'device_config':
{'SRmaster': 'true', 'location': '/mnt'}, 'command': 'vdi_activate',
'vdi_allow_caching': 'false', 'sr_ref':
'OpaqueRef:ee16513a-2dd5-0306-6ad6-73d9ef2a958d', 'vdi_uuid':
'00048fc5-9764-408a-801d-9d9442974c9d'}
[11247] 2012-05-23 22:54:56.446328 blktap2.activate
[11247] 2012-05-23 22:54:56.446418 lock: acquired
/var/lock/sm/00048fc5-9764-408a-801d-9d9442974c9d/vdi
[11247] 2012-05-23 22:54:56.446512 Adding tag to:
00048fc5-9764-408a-801d-9d9442974c9d
[11247] 2012-05-23 22:54:56.460867 Activate lock succeeded
[11247] 2012-05-23 22:54:56.494658 ['/usr/sbin/td-util', 'query',
'vhd', '-vpf', '/mnt/00048fc5-9764-408a-801d-9d9442974c9d.vhd']
[11247] 2012-05-23 22:54:56.499583 SUCCESS
[11247] 2012-05-23 22:54:56.532880
PhyLink(/dev/sm/phy/357e7a73-ec60-6ae6-fe0d-56ca87d228b2/00048fc5-9764-408a-801d-9d9442974c9d)
- /mnt/00048fc5-9764-408a-801d-9d9442974c9d.vhd
[11247] 2012-05-23 22:54:56.537025 ['/usr/sbin/tap-ctl', 'allocate']
[11247] 2012-05-23 22:54:56.540947 = 0
[11247] 2012-05-23 22:54:56.545753 ['/usr/sbin/tap-ctl', 'spawn']
[11247] 2012-05-23 22:54:56.551907 = 0
[11247] 2012-05-23 22:54:56.552088 ['/usr/sbin/tap-ctl', 'attach',
'-p', '11282', '-m', '0']
[11247] 2012-05-23 22:54:56.556115 = 0
[11247] 2012-05-23 22:54:56.556339 ['/usr/sbin/tap-ctl', 'open',
'-p', '11282', '-m', '0', '-a',
'vhd:/mnt/00048fc5-9764-408a-801d-9d9442974c9d.vhd']
[11247] 2012-05-23 22:54:56.577555 = 0
[11247] 2012-05-23 22:54:56.582410 tap.activate: Launched
Tapdisk(vhd:/mnt/00048fc5-9764-408a-801d-9d9442974c9d.vhd, pid=11282,
minor=0, state=R)
[11247] 2012-05-23 22:54:56.582743
DeviceNode(/dev/sm/backend/357e7a73-ec60-6ae6-fe0d-56ca87d228b2/00048fc5-9764-408a-801d-9d9442974c9d)
- /dev/xen/blktap-2/tapdev0
[11247] 2012-05-23 22:54:56.583023 lock: released
/var/lock/sm/00048fc5-9764-408a-801d-9d9442974c9d/vdi
[11247] 2012-05-23 22:54:56.583125 lock: closed
/var/lock/sm/00048fc5-9764-408a-801d-9d9442974c9d/vdi
[11247] 2012-05-23 22:54:56.583289 lock: closed
/var/lock/sm/357e7a73-ec60-6ae6-fe0d-56ca87d228b2/sr
[11247] 2012-05-23 22:54:56.583770 lock: closed
/var/lock/sm/357e7a73-ec60-6ae6-fe0d-56ca87d228b2/sr
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
