Bug#501921: eeepc-acpi-scripts: installation errors and failures
Package: eeepc-acpi-scripts Version: 1.0.8 Severity: normal -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 sudo apt-get install eeepc-acpi-scripts Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libsmbiosxml1 epiphany-data libmikmod2 libsdl-mixer1.2 libsmpeg0 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: acpi-support-base acpid Suggested packages: acpi-support aosd-cat gnome-osd The following NEW packages will be installed acpi-support-base acpid eeepc-acpi-scripts 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 64.1kB of archives. After this operation, 410kB of additional disk space will be used. Do you want to continue [Y/n]? Get: 1 http://ftp.nl.debian.org sid/main acpid 1.0.6-13 [31.9kB] Get: 2 http://ftp.nl.debian.org sid/main acpi-support-base 0.109-9 [22.3kB] Get: 3 http://ftp.nl.debian.org sid/main eeepc-acpi-scripts 1.0.8 [9854B] Fetched 64.1kB in 0s (119kB/s) Selecting previously deselected package acpid. (Reading database ... 76624 files and directories currently installed.) Unpacking acpid (from .../acpid_1.0.6-13_i386.deb) ... Selecting previously deselected package acpi-support-base. Unpacking acpi-support-base (from .../acpi-support-base_0.109-9_all.deb) ... Selecting previously deselected package eeepc-acpi-scripts. Unpacking eeepc-acpi-scripts (from .../eeepc-acpi-scripts_1.0.8_all.deb) ... Processing triggers for man-db ... Setting up acpid (1.0.6-13) ... Loading ACPI modules Starting ACPI services...acpid: can't open /proc/acpi/event: Device or resource busy invoke-rc.d: initscript acpid, action start failed. dpkg: error processing acpid (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of acpi-support-base: acpi-support-base depends on acpid (= 1.0.4); however: Package acpid is not configured yet. dpkg: error processing acpi-support-base (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of eeepc-acpi-scripts: eeepc-acpi-scripts depends on acpid (= 1.0.4); however: Package acpid is not configured yet. eeepc-acpi-scripts depends on acpi-support-base; however: Package acpi-support-base is not configured yet. dpkg: error processing eeepc-acpi-scripts (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: acpid acpi-support-base eeepc-acpi-scripts E: Sub-process /usr/bin/dpkg returned an error code (1) - -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages eeepc-acpi-scripts depends on: pn acpi-support-base none (no description available) pn acpid none (no description available) ii pm-utils 1.1.2.4-1 utilities and scripts for power ma Versions of packages eeepc-acpi-scripts recommends: ii alsa-utils1.0.16-2 ALSA utilities Versions of packages eeepc-acpi-scripts suggests: pn aosd-cat none (no description available) pn gnome-osd none (no description available) ii gsfonts-x11 0.21 Make Ghostscript fonts available t ii ttf-bitstream-vera1.10-7 The Bitstream Vera family of free ii ttf-dejavu2.25-3 Metapackage to pull in ttf-dejavu- ii ttf-liberation2-1The Red Hat Liberation family of f - -- no debconf information -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAkjw0UkACgkQ1WclBW9j5HmAnQP/d52TloG/cQC5ZBmSNSEQlFad UyIB8PIDarK5dQziN+GLfefANG8X5YOky06VaJYkdDPz59jMIlVSCFH1DdNzxggW DMTfgChm1PWgmvzkZU7igos0aj5Jofc41PtTNyyScP1W6KsZgeHh93FMXyCsk7iR JRETvL0DFu5GewKPHG0= =ZMN4 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500385: closed by maximilian attems [EMAIL PROTECTED] (Re: Bug#500385: linux-image-2.6.26-1-686: usbcore.ko to many enumeration errors during bootup and first time module load)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Thank you maximilian for responding to the bug report. snip just set an higher printk level. snip This is not really a solution that satisfy me. I would like to see a upstream solutions. It would not make me happy if I have to set a higher printk level on all individual clients. Is there a better solution, why do the messages appear in the first place? Best regards, Jelle -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iJwEAQECAAYFAkjfefEACgkQ1WclBW9j5HlSnwP9EgRezy2NSU5Mulv2RaB6KYeJ iQ0WSUdHtsX1PaexzVMeVglu2N6oXEanHf0KthW+OZkI2LdoIPItNYYUiphhpJTO zY+DvV47WtFkpTA8HJx6yQjKkUtkSFYGWVUx/7J9hjntcTt5CGqe+qcZ2m57iP91 MpzGSfrumY1sYYvyfIc= =H1X4 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500345: evince xfce gtk enviorment unable to open external links
Thank you Josselin for responding to the bug report. /usr/bin/gnome-open http://www.powercraft.nl/ Error showing url: There was an error launching the default action command associated with this location. Kind regards, Jelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500359: evince memory use is to big, keeps increasing until it fails
Thank you Sven for responding to the bug report, I did not directly connect the zoom level as the memory bug/feature. Any idea what the developers are planning to do about this? I only saw that the bug was changed as critical, bug no concrete plans? Kind regards, Jelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500359: evince memory use is to big, keeps increasing until it fails
Sven Arvidsson wrote: On Sun, 2008-09-28 at 21:18 +0200, Jelle de Jong wrote: I did not directly connect the zoom level as the memory bug/feature. Any idea what the developers are planning to do about this? I only saw that the bug was changed as critical, bug no concrete plans? Hi, It's on the roadmap for GNOME 2.26. http://live.gnome.org/Evince/Roadmap On the other hand, I think it was on the roadmap for 2.24 too initially, so I wouldn't hold my breath. I guess it's a lot of hard work. Thank you for responding so quickly, and with very helpful information. I will keep the progress in track? Is there an easy way to get this issue on an the agenda of a good developer. I am willing to donate € 15,- for a good upstream fix, since the problem prevents me to use evince in my working environment. (maybe a quick fix is a separate build that disables the pixbuf) Best regards, Jelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500339: totem-xine with dvb-t, audio channels, gui does not indicate buffering process correctly
Josselin Mouette wrote: I presume this is an issue with the backend, since it works fine for other kinds of streams. Just to confirm, could you check whether this happens with totem-gstreamer? Thank you Jossselin for responding to the bug reports, this is really appreciated! I tried installing totem-gstreamer and its plugins but I cant find the correct plugin/backend for the dvb streams. I attached a log file with more information, do you see what is missing? The reason why I used xine backend are the unwanted dependencies on totem-gstreamer. I must install all kind of packages that i really dont want like gksu synaptic, all kind of other gnome stuff. Is it possible to create a totem-gstreamer-minimal package? Should I create a separate bug report for this? Best regard, Jelle $ dpkg --list *gstreamer* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++--- pn gstreamer-tools none (no description available) ii gstreamer0.10-alsa 0.10.20-1GStreamer plugin for ALSA un gstreamer0.10-audiosink none (no description available) un gstreamer0.10-colorspace none (no description available) un gstreamer0.10-docnone (no description available) ii gstreamer0.10-ffmpeg 0.10.4-3 FFmpeg plugin for GStreamer un gstreamer0.10-fluendo-mp3none (no description available) pn gstreamer0.10-fluendo-mpegdemux none (no description available) ii gstreamer0.10-gnomevfs 0.10.20-1GStreamer plugin for GnomeVFS un gstreamer0.10-pluginsnone (no description available) ii gstreamer0.10-plugins-bad0.10.7-2 GStreamer plugins from the bad set un gstreamer0.10-plugins-bad-multiverse none (no description available) ii gstreamer0.10-plugins-base 0.10.20-1GStreamer plugins from the base set ii gstreamer0.10-plugins-good 0.10.8-4 GStreamer plugins from the good set un gstreamer0.10-plugins-good-doc none (no description available) un gstreamer0.10-plugins-really-bad none (no description available) ii gstreamer0.10-plugins-ugly 0.10.8-1 GStreamer plugins from the ugly set pn gstreamer0.10-tools none (no description available) un gstreamer0.10-videosink none (no description available) ii gstreamer0.10-x 0.10.20-1GStreamer plugins for X11 and Pango un gstreamer0.8-tools none (no description available) un kaffeine-gstreamer none (no description available) ii libgstreamer-plugins-base0.10-0 0.10.20-1GStreamer libraries from the base set pn libgstreamer-plugins-base0.10-devnone (no description available) ii libgstreamer0.10-0 0.10.20-1Core GStreamer libraries and elements pn libgstreamer0.10-dev none (no description available) ii totem-gstreamer 2.22.2-4 A simple media player for the GNOME desktop based on GStreamer $ totem-gstreamer dvb:// ** (totem-gstreamer:4680): WARNING **: Failed to create dbus proxy for org.gnome.SettingsDaemon: Could not get owner of name 'org.gnome.SettingsDaemon': no such name ** Message: Error: A DVB protocol source plugin is required to play this stream, but not installed. gstplaybasebin.c(1668):
Bug#500345: evince xfce gtk enviorment unable to open external links
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Josselin Mouette wrote: What is the output of gconftool -R /desktop/gnome/url-handlers/http? Is the corresponding command installed? Thank you Josselin for responding, $ gconftool -R /desktop/gnome/url-handlers/http needs_terminal = false command = gnome-www-browser %s enabled = true $ whereis gnome-www-browser gnome-www-browser: $ apt-cache search gnome-www-browser epiphany-gecko - Intuitive GNOME web browser - Gecko version epiphany-webkit - Intuitive GNOME web browser - webkit version galeon - GNOME web browser for advanced users icedove-gnome-support - Support for Gnome in Icedove iceweasel-gnome-support - Support for GNOME in Iceweasel $ sudo apt-get install icedove-gnome-support iceweasel-gnome-support 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. $ dpkg -S gnome-www-browser dpkg: *gnome-www-browser* not found. I have no gnome-www-browser on my system. I do have x-www-browser that opens iceweasel and can be set by the alternative system. whereis x-www-browser x-www-browser: /usr/bin/x-www-browser ... dpkg -S x-www-browser app-install-data: /usr/share/app-install/desktop/lxde-x-www-browser.desktop Is it possible to add some sort of fall-back function to use x-www-browser instead of gnome-www-browser? Kind regards, Jelle -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iJwEAQECAAYFAkjiBJwACgkQ1WclBW9j5HktTAP/RNIYXMalIN9iXaoq4YZPf/B3 U1wrK6jI4enbO3BbX2ctrpyItTs1lfpnRYxLFQv3tqwL2GA3GTK/AeN3pmHow0eT MqDXDkfLueoxElHBuWNLVzcuRH9yVQoi38m42RmoiDeZo0ZCQbxb36cgaJcsjPs1 SQTKew/FiXfez3Mz9MI= =mQZK -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500712: zd1211-firmware: 330% longer bootup time when zd1211rw device is attached
Package: zd1211-firmware Version: 2.21.0.0-0.1 Severity: normal -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 My boottime increased to an unworkable long boottime when the usb device is attached. I attached several bootcharts that can be viewed with the display file command of the imagemagick package. After the zd1211rw modprobe command it just waits there for a long while... Maybe the bugreport should also be linked to the linux-image-2.6.26-1-686? Thanks in advance, zd1211-firmware: /lib/firmware/zd1211 linux-image-2.6.26-1-686: /lib/modules/2.6.26-1-686/kernel/drivers/net/wireless/zd1211rw/zd1211rw.ko [ 315.952411] usb 5-3.4: new high speed USB device using ehci_hcd and address 6 [ 316.045067] usb 5-3.4: configuration #1 chosen from 1 choice [ 316.046585] usb 5-3.4: New USB device found, idVendor=0ace, idProduct=1215 [ 316.046597] usb 5-3.4: New USB device strings: Mfr=16, Product=32, SerialNumber=0 [ 316.046605] usb 5-3.4: Product: USB2.0 WLAN [ 316.046611] usb 5-3.4: Manufacturer: ZyDAS [ 316.396414] usb 5-3.4: reset high speed USB device using ehci_hcd and address 6 [ 316.489817] phy0: Selected rate control algorithm 'pid' [ 316.809741] zd1211rw 5-3.4:1.0: phy0 [ 316.809795] usbcore: registered new interface driver zd1211rw [ 316.855869] udev: renamed network interface wmaster0 to eth1 - -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash zd1211-firmware depends on no packages. zd1211-firmware recommends no packages. Versions of packages zd1211-firmware suggests: pn zd1211-module none (no description available) - -- no debconf information bootchart-zd1211rw.svgz Description: GNU Zip compressed data bootchart-normal.svgz Description: GNU Zip compressed data
Bug#500331: totem-xine with dvb-t jups unwanted automaticly to next channel
Package: totem-xine Version: 2.22.2-4 Severity: normal When watching a dvb-t channel, and the channel is paused and resumed, or it has a bid of a bad signal and is trying to buffer. It will just jump to the next channel, while you just want it to rebuffer the singal and start playing the channel. Pausing and later resuming a channel should just not make totem-xine jump to the next channel. It should resume the paused channel. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages totem-xine depends on: ii gnome-icon-theme 2.22.0-1 GNOME Desktop icon theme ii iso-codes 3.3-1 ISO language, territory, currency, ii libart-2.0-2 2.3.20-2 Library of functions for 2D graphi ii libatk1.0-01.22.0-1 The ATK accessibility toolkit ii libbonobo2-0 2.22.0-1 Bonobo CORBA interfaces library ii libbonoboui2-0 2.22.0-1 The Bonobo UI library ii libc6 2.7-13GNU C Library: Shared libraries ii libcairo2 1.6.4-6 The Cairo 2D vector graphics libra ii libdbus-1-31.2.1-3 simple interprocess messaging syst ii libdbus-glib-1-2 0.76-1simple interprocess messaging syst ii libfontconfig1 2.6.0-1 generic font configuration library ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libgcc11:4.3.2-1 GCC support library ii libgconf2-42.22.0-1 GNOME configuration database syste ii libglib2.0-0 2.16.5-1 The GLib library of C routines ii libgnome-keyring0 2.22.3-1 GNOME keyring services library ii libgnome2-02.20.1.1-1The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.20.1.1-1A powerful object-oriented display ii libgnomeui-0 2.20.1.1-2The GNOME 2 libraries (User Interf ii libgnomevfs2-0 1:2.22.0-5GNOME Virtual File System (runtime ii libgtk2.0-02.12.11-3 The GTK+ graphical user interface ii libice62:1.0.4-1 X11 Inter-Client Exchange library ii libnautilus-extension1 2.20.0-7 libraries for nautilus components ii liborbit2 1:2.14.13-0.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.20.5-2 Layout and rendering of internatio ii libpixman-1-0 0.10.0-2 pixel-manipulation library for X a ii libpng12-0 1.2.27-1 PNG library - runtime ii libpopt0 1.14-4lib for parsing cmdline parameters ii libsm6 2:1.0.3-2 X11 Session Management library ii libstartup-notificatio 0.9-1 library for program launch feedbac ii libstdc++6 4.3.2-1 The GNU Standard C++ Library v3 ii libtotem-plparser102.22.3-1 Totem Playlist Parser library - ru ii libx11-6 2:1.1.5-1 X11 client-side library ii libxcb-render-util00.2.1+git1-1 utility libraries for X C Binding ii libxcb-render0 1.1-1.1 X C Binding, render extension ii libxcb11.1-1.1 X C Binding ii libxine1 1.1.14-3 the xine video/media player librar ii libxrandr2 2:1.2.3-1 X11 RandR extension library ii libxrender11:0.9.4-2 X Rendering Extension client libra ii libxtst6 2:1.0.3-1 X11 Testing -- Resource extension ii libxxf86vm11:1.0.2-1 X11 XFree86 video mode extension l ii python 2.5.2-2 An interactive high-level object-o ii python2.5 2.5.2-11 An interactive high-level object-o ii totem-common 2.22.2-4 Data files for the Totem media pla ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages totem-xine recommends: ii libxine1-ffmpeg 1.1.14-3 MPEG-related plugins for libxine1 ii libxine1-gnome1.1.14-3 GNOME-related plugins for libxine1 ii totem-mozilla 2.22.2-4 Totem Mozilla plugin ii totem-plugins 2.22.2-4 Plugins for the Totem media player totem-xine suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500332: totem-xine lirc pluging --mute does not toggle like it should
Package: totem-xine Version: 2.22.2-4 Severity: normal When using LIRC system and the LIRC totem plugin with a keybinding on the mute event, totem-xine will mute, but when repressing the mute button the previous audio strenght is not restored. so mute/unmute does not work. It curently stays muted and will not unmute, when recieving the mute event. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages totem-xine depends on: ii gnome-icon-theme 2.22.0-1 GNOME Desktop icon theme ii iso-codes 3.3-1 ISO language, territory, currency, ii libart-2.0-2 2.3.20-2 Library of functions for 2D graphi ii libatk1.0-01.22.0-1 The ATK accessibility toolkit ii libbonobo2-0 2.22.0-1 Bonobo CORBA interfaces library ii libbonoboui2-0 2.22.0-1 The Bonobo UI library ii libc6 2.7-13GNU C Library: Shared libraries ii libcairo2 1.6.4-6 The Cairo 2D vector graphics libra ii libdbus-1-31.2.1-3 simple interprocess messaging syst ii libdbus-glib-1-2 0.76-1simple interprocess messaging syst ii libfontconfig1 2.6.0-1 generic font configuration library ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libgcc11:4.3.2-1 GCC support library ii libgconf2-42.22.0-1 GNOME configuration database syste ii libglib2.0-0 2.16.5-1 The GLib library of C routines ii libgnome-keyring0 2.22.3-1 GNOME keyring services library ii libgnome2-02.20.1.1-1The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.20.1.1-1A powerful object-oriented display ii libgnomeui-0 2.20.1.1-2The GNOME 2 libraries (User Interf ii libgnomevfs2-0 1:2.22.0-5GNOME Virtual File System (runtime ii libgtk2.0-02.12.11-3 The GTK+ graphical user interface ii libice62:1.0.4-1 X11 Inter-Client Exchange library ii libnautilus-extension1 2.20.0-7 libraries for nautilus components ii liborbit2 1:2.14.13-0.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.20.5-2 Layout and rendering of internatio ii libpixman-1-0 0.10.0-2 pixel-manipulation library for X a ii libpng12-0 1.2.27-1 PNG library - runtime ii libpopt0 1.14-4lib for parsing cmdline parameters ii libsm6 2:1.0.3-2 X11 Session Management library ii libstartup-notificatio 0.9-1 library for program launch feedbac ii libstdc++6 4.3.2-1 The GNU Standard C++ Library v3 ii libtotem-plparser102.22.3-1 Totem Playlist Parser library - ru ii libx11-6 2:1.1.5-1 X11 client-side library ii libxcb-render-util00.2.1+git1-1 utility libraries for X C Binding ii libxcb-render0 1.1-1.1 X C Binding, render extension ii libxcb11.1-1.1 X C Binding ii libxine1 1.1.14-3 the xine video/media player librar ii libxrandr2 2:1.2.3-1 X11 RandR extension library ii libxrender11:0.9.4-2 X Rendering Extension client libra ii libxtst6 2:1.0.3-1 X11 Testing -- Resource extension ii libxxf86vm11:1.0.2-1 X11 XFree86 video mode extension l ii python 2.5.2-2 An interactive high-level object-o ii python2.5 2.5.2-11 An interactive high-level object-o ii totem-common 2.22.2-4 Data files for the Totem media pla ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages totem-xine recommends: ii libxine1-ffmpeg 1.1.14-3 MPEG-related plugins for libxine1 ii libxine1-gnome1.1.14-3 GNOME-related plugins for libxine1 ii totem-mozilla 2.22.2-4 Totem Mozilla plugin ii totem-plugins 2.22.2-4 Plugins for the Totem media player totem-xine suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500333: totem-xine: currently not posslible to directly select an element out the playlist form cli or lirc
Package: totem-xine Version: 2.22.2-4 Severity: wishlist I would like to see the possiblilty to directly select an play an element out of the loaded playlist. So you can command totem to play element 4 out of the playlist. Or directly play element 1 out of the playlist. I would like to see this as a command options --select playlistitemX. Also make this function in the LIRC plugin. So with a remote you can press the number keys (0..9) to select the listitem to play so you can directly switch to channel 1 of a dvb-t playlist or directly go to channel 9. If possible also make pres 1 then quicky 5 to select item 15 ... -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages totem-xine depends on: ii gnome-icon-theme 2.22.0-1 GNOME Desktop icon theme ii iso-codes 3.3-1 ISO language, territory, currency, ii libart-2.0-2 2.3.20-2 Library of functions for 2D graphi ii libatk1.0-01.22.0-1 The ATK accessibility toolkit ii libbonobo2-0 2.22.0-1 Bonobo CORBA interfaces library ii libbonoboui2-0 2.22.0-1 The Bonobo UI library ii libc6 2.7-13GNU C Library: Shared libraries ii libcairo2 1.6.4-6 The Cairo 2D vector graphics libra ii libdbus-1-31.2.1-3 simple interprocess messaging syst ii libdbus-glib-1-2 0.76-1simple interprocess messaging syst ii libfontconfig1 2.6.0-1 generic font configuration library ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libgcc11:4.3.2-1 GCC support library ii libgconf2-42.22.0-1 GNOME configuration database syste ii libglib2.0-0 2.16.5-1 The GLib library of C routines ii libgnome-keyring0 2.22.3-1 GNOME keyring services library ii libgnome2-02.20.1.1-1The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.20.1.1-1A powerful object-oriented display ii libgnomeui-0 2.20.1.1-2The GNOME 2 libraries (User Interf ii libgnomevfs2-0 1:2.22.0-5GNOME Virtual File System (runtime ii libgtk2.0-02.12.11-3 The GTK+ graphical user interface ii libice62:1.0.4-1 X11 Inter-Client Exchange library ii libnautilus-extension1 2.20.0-7 libraries for nautilus components ii liborbit2 1:2.14.13-0.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.20.5-2 Layout and rendering of internatio ii libpixman-1-0 0.10.0-2 pixel-manipulation library for X a ii libpng12-0 1.2.27-1 PNG library - runtime ii libpopt0 1.14-4lib for parsing cmdline parameters ii libsm6 2:1.0.3-2 X11 Session Management library ii libstartup-notificatio 0.9-1 library for program launch feedbac ii libstdc++6 4.3.2-1 The GNU Standard C++ Library v3 ii libtotem-plparser102.22.3-1 Totem Playlist Parser library - ru ii libx11-6 2:1.1.5-1 X11 client-side library ii libxcb-render-util00.2.1+git1-1 utility libraries for X C Binding ii libxcb-render0 1.1-1.1 X C Binding, render extension ii libxcb11.1-1.1 X C Binding ii libxine1 1.1.14-3 the xine video/media player librar ii libxrandr2 2:1.2.3-1 X11 RandR extension library ii libxrender11:0.9.4-2 X Rendering Extension client libra ii libxtst6 2:1.0.3-1 X11 Testing -- Resource extension ii libxxf86vm11:1.0.2-1 X11 XFree86 video mode extension l ii python 2.5.2-2 An interactive high-level object-o ii python2.5 2.5.2-11 An interactive high-level object-o ii totem-common 2.22.2-4 Data files for the Totem media pla ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages totem-xine recommends: ii libxine1-ffmpeg 1.1.14-3 MPEG-related plugins for libxine1 ii libxine1-gnome1.1.14-3 GNOME-related plugins for libxine1 ii totem-mozilla 2.22.2-4 Totem Mozilla plugin ii totem-plugins 2.22.2-4 Plugins for the Totem media player totem-xine suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500334: totem-xine with dvb-t does not clear the screen when switching to audio only channel
Package: totem-xine Version: 2.22.2-4 Severity: normal When using totem-xine with dvb-t and you watch a video channel, and then switch to a radio channel, the video rendering keeps showing the previous image of the video channel. The rendering should be disabled when using an audio channel. This same issue happens when playing an dvb-t audio channel and using the menu. The video output is not synced or someting like that, please see the attached screenshot. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages totem-xine depends on: ii gnome-icon-theme 2.22.0-1 GNOME Desktop icon theme ii iso-codes 3.3-1 ISO language, territory, currency, ii libart-2.0-2 2.3.20-2 Library of functions for 2D graphi ii libatk1.0-01.22.0-1 The ATK accessibility toolkit ii libbonobo2-0 2.22.0-1 Bonobo CORBA interfaces library ii libbonoboui2-0 2.22.0-1 The Bonobo UI library ii libc6 2.7-13GNU C Library: Shared libraries ii libcairo2 1.6.4-6 The Cairo 2D vector graphics libra ii libdbus-1-31.2.1-3 simple interprocess messaging syst ii libdbus-glib-1-2 0.76-1simple interprocess messaging syst ii libfontconfig1 2.6.0-1 generic font configuration library ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libgcc11:4.3.2-1 GCC support library ii libgconf2-42.22.0-1 GNOME configuration database syste ii libglib2.0-0 2.16.5-1 The GLib library of C routines ii libgnome-keyring0 2.22.3-1 GNOME keyring services library ii libgnome2-02.20.1.1-1The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.20.1.1-1A powerful object-oriented display ii libgnomeui-0 2.20.1.1-2The GNOME 2 libraries (User Interf ii libgnomevfs2-0 1:2.22.0-5GNOME Virtual File System (runtime ii libgtk2.0-02.12.11-3 The GTK+ graphical user interface ii libice62:1.0.4-1 X11 Inter-Client Exchange library ii libnautilus-extension1 2.20.0-7 libraries for nautilus components ii liborbit2 1:2.14.13-0.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.20.5-2 Layout and rendering of internatio ii libpixman-1-0 0.10.0-2 pixel-manipulation library for X a ii libpng12-0 1.2.27-1 PNG library - runtime ii libpopt0 1.14-4lib for parsing cmdline parameters ii libsm6 2:1.0.3-2 X11 Session Management library ii libstartup-notificatio 0.9-1 library for program launch feedbac ii libstdc++6 4.3.2-1 The GNU Standard C++ Library v3 ii libtotem-plparser102.22.3-1 Totem Playlist Parser library - ru ii libx11-6 2:1.1.5-1 X11 client-side library ii libxcb-render-util00.2.1+git1-1 utility libraries for X C Binding ii libxcb-render0 1.1-1.1 X C Binding, render extension ii libxcb11.1-1.1 X C Binding ii libxine1 1.1.14-3 the xine video/media player librar ii libxrandr2 2:1.2.3-1 X11 RandR extension library ii libxrender11:0.9.4-2 X Rendering Extension client libra ii libxtst6 2:1.0.3-1 X11 Testing -- Resource extension ii libxxf86vm11:1.0.2-1 X11 XFree86 video mode extension l ii python 2.5.2-2 An interactive high-level object-o ii python2.5 2.5.2-11 An interactive high-level object-o ii totem-common 2.22.2-4 Data files for the Totem media pla ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages totem-xine recommends: ii libxine1-ffmpeg 1.1.14-3 MPEG-related plugins for libxine1 ii libxine1-gnome1.1.14-3 GNOME-related plugins for libxine1 ii totem-mozilla 2.22.2-4 Totem Mozilla plugin ii totem-plugins 2.22.2-4 Plugins for the Totem media player totem-xine suggests no packages. -- no debconf information attachment: 2008-09-27-131640_345x334_scrot.png
Bug#500345: evince xfce gtk enviorment unable to open external links
Package: evince Version: 2.22.2-3 Severity: normal There is a problem with evince in a gtk only (not gnome) enviorment that is will not open links in documents like pdf documents, it will generate an error like unable to open external links. Can this problem be fixed, without the need to change any configuration file. I just would like to see evice working directly on all my client systems. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages evince depends on: ii gconf2 2.22.0-1 GNOME configuration database syste ii gnome-icon-theme 2.22.0-1 GNOME Desktop icon theme ii libart-2.0-2 2.3.20-2 Library of functions for 2D graphi ii libatk1.0-01.22.0-1 The ATK accessibility toolkit ii libbonobo2-0 2.22.0-1 Bonobo CORBA interfaces library ii libbonoboui2-0 2.22.0-1 The Bonobo UI library ii libc6 2.7-13GNU C Library: Shared libraries ii libcairo2 1.6.4-6 The Cairo 2D vector graphics libra ii libdbus-1-31.2.1-3 simple interprocess messaging syst ii libdbus-glib-1-2 0.76-1simple interprocess messaging syst ii libdjvulibre21 3.5.21-1 Runtime support for the DjVu image ii libfontconfig1 2.6.0-1 generic font configuration library ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libgcc11:4.3.2-1 GCC support library ii libgconf2-42.22.0-1 GNOME configuration database syste ii libglade2-01:2.6.2-1 library to load .glade files at ru ii libglib2.0-0 2.16.5-1 The GLib library of C routines ii libgnome-keyring0 2.22.3-1 GNOME keyring services library ii libgnome2-02.20.1.1-1The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.20.1.1-1A powerful object-oriented display ii libgnomeui-0 2.20.1.1-2The GNOME 2 libraries (User Interf ii libgnomevfs2-0 1:2.22.0-5GNOME Virtual File System (runtime ii libgtk2.0-02.12.11-3 The GTK+ graphical user interface ii libice62:1.0.4-1 X11 Inter-Client Exchange library ii libkpathsea4 2007.dfsg.2-3 TeX Live: path search library for ii libnautilus-extension1 2.20.0-7 libraries for nautilus components ii liborbit2 1:2.14.13-0.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.20.5-2 Layout and rendering of internatio ii libpixman-1-0 0.10.0-2 pixel-manipulation library for X a ii libpng12-0 1.2.27-1 PNG library - runtime ii libpoppler-glib3 0.8.7-1 PDF rendering library (GLib-based ii libpopt0 1.14-4lib for parsing cmdline parameters ii libsm6 2:1.0.3-2 X11 Session Management library ii libspectre10.2.0.ds-1Library for rendering Postscript d ii libstdc++6 4.3.2-1 The GNU Standard C++ Library v3 ii libtiff4 3.8.2-11 Tag Image File Format (TIFF) libra ii libx11-6 2:1.1.5-1 X11 client-side library ii libxcb-render-util00.2.1+git1-1 utility libraries for X C Binding ii libxcb-render0 1.1-1.1 X C Binding, render extension ii libxcb11.1-1.1 X C Binding ii libxml22.6.32.dfsg-4 GNOME XML library ii libxrender11:0.9.4-2 X Rendering Extension client libra ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages evince recommends: ii dbus-x11 1.2.1-3simple interprocess messaging syst Versions of packages evince suggests: pn poppler-data none (no description available) ii unrar 1:3.8.2-1 Unarchiver for .rar files (non-fre -- no debconf information attachment: 2008-09-27-141600_391x180_scrot.png
Bug#500384: init script and lircd are to verbose in there output, make lsb compliant?
Package: lirc Version: 0.8.3-2 Severity: normal -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I checked some other bug reports before writing this one, I found somethings about the LSB headers that where added and some things about the output when pressing keys. I would like to report that the bootlog of the init script of lirc is strange and possible not compliant. It outputs a single dot, and the driver outputs its version and PID and thinks like userspace ready. These things should not show up during boot. Could there be a good check on all the outputs of the scripts and the lircd itself? I would like to have a clean correct bootlog that makes sence. Thanks in advance. - -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages lirc depends on: ii debconf [debconf-2.0]1.5.23 Debian configuration management sy ii libasound2 1.0.16-2ALSA library ii libc62.7-13 GNU C Library: Shared libraries ii liblircclient0 0.8.3-2 infra-red remote control support - ii libusb-0.1-4 2:0.1.12-13 userspace USB programming library lirc recommends no packages. Versions of packages lirc suggests: pn lirc-modules-source none (no description available) pn lirc-svga none (no description available) pn lirc-xnone (no description available) - -- debconf information excluded -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAkjeZysACgkQ1WclBW9j5HmX3gP/VjEnbP9HdyWRWktHzjkp+ZXy h5fvHGAwtsqYCoIU7J279ElMloSUK2i5VAZmdJ8J7I+ILQsKw/vHbcFrgFtI1alm EQ4vqAVpVMJDaeIq9vdkqgydNCXEBlC6j/2TwgNMrT5Khhcg+Rz1kaoBcMkI1the NQcO48TiXJs7eDmND4c= =yQJZ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500385: linux-image-2.6.26-1-686: usbcore.ko to many enumeration errors during bootup and first time module load
Package: linux-image-2.6.26-1-686 Version: 2.6.26-5 Severity: normal -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 During bootup evdev or the initramfs loads the usbcore.ko module to initialize usb devices, this should go fine without strange errors like enumeration problems or connecting problems. I almost always get errors like unable to enumerate usbdevice on port x This especialy happens with external usbdevices connected to the main hup or an external hup. I think these device just need some more time to enumerate and the usbcore is to quick with is justments? The device do all work, so its not that the devices are not working but its about the output that is showed to the users. I would like to keep the bootlogs as logical and correct as possible. Thanks in advance. - -- Package-specific info: ** Version: Linux version 2.6.26-1-686 (Debian 2.6.26-5) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 16:46:13 UTC 2008 ** Command line: root=/dev/sda1 ro quiet noresume pci=nommconf SELINUX_INIT=NO ** Tainted: P (1) ** Kernel log: [ 13.197510] ehci_hcd :00:1d.7: debug port 1 [ 13.197524] PCI: cache line size of 32 is not supported by device :00:1d.7 [ 13.197544] ehci_hcd :00:1d.7: irq 23, io mem 0xf7eb7c00 [ 13.244063] ehci_hcd :00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.244279] usb usb5: configuration #1 chosen from 1 choice [ 13.244358] hub 5-0:1.0: USB hub found [ 13.244379] hub 5-0:1.0: 8 ports detected [ 13.348349] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.348361] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.348369] usb usb5: Product: EHCI Host Controller [ 13.348375] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd [ 13.348381] usb usb5: SerialNumber: :00:1d.7 [ 13.349360] ACPI: PCI Interrupt :00:1f.3[B] - GSI 19 (level, low) - IRQ 19 [ 13.640068] usb 1-2: device not accepting address 2, error -71 [ 13.696117] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 14.064092] usb 5-2: new high speed USB device using ehci_hcd and address 2 [ 14.201633] usb 5-2: configuration #1 chosen from 1 choice [ 14.202194] usb 5-2: New USB device found, idVendor=2040, idProduct=6502 [ 14.202204] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 14.202212] usb 5-2: Product: WinTV HVR-900 [ 14.202217] usb 5-2: SerialNumber: 4030600678 [ 14.440108] usb 5-3: new high speed USB device using ehci_hcd and address 3 [ 14.573637] usb 5-3: configuration #1 chosen from 1 choice [ 14.573951] hub 5-3:1.0: USB hub found [ 14.574235] hub 5-3:1.0: 4 ports detected [ 14.680339] usb 5-3: New USB device found, idVendor=05e3, idProduct=0608 [ 14.680353] usb 5-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 14.680361] usb 5-3: Product: USB2.0 Hub [ 14.880378] usb 5-3.1: new low speed USB device using ehci_hcd and address 4 [ 14.996769] usb 5-3.1: configuration #1 chosen from 1 choice [ 14.998281] usb 5-3.1: New USB device found, idVendor=046d, idProduct=c30e [ 14.998290] usb 5-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.998301] usb 5-3.1: Product: HID compliant keyboard [ 14.998307] usb 5-3.1: Manufacturer: Logitech [ 15.196376] usb 5-3.2: new full speed USB device using ehci_hcd and address 5 [ 15.298286] usb 5-3.2: configuration #1 chosen from 1 choice [ 15.301387] usb 5-3.2: New USB device found, idVendor=04e6, idProduct=5115 [ 15.301399] usb 5-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 15.301407] usb 5-3.2: Product: SCR33x USB Smart Card Reader [ 15.301414] usb 5-3.2: Manufacturer: SCM Microsystems Inc. [ 15.301420] usb 5-3.2: SerialNumber: 21120618201041 [ 15.500372] usb 5-3.3: new low speed USB device using ehci_hcd and address 6 [ 15.598515] usb 5-3.3: configuration #1 chosen from 1 choice [ 15.599173] usb 5-3.3: New USB device found, idVendor=046d, idProduct=c043 [ 15.599182] usb 5-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 15.599190] usb 5-3.3: Product: USB-PS/2 Optical Mouse [ 15.599197] usb 5-3.3: Manufacturer: Logitech [ 16.251479] Linux video capture interface: v2.00 [ 16.323356] em28xx v4l2 driver version 0.0.1 loaded [ 16.323489] em28xx: new video device (2040:6502): interface 0, class 255 [ 16.323496] em28xx: device is attached to a USB 2.0 bus [ 16.323505] em28xx #0: Alternate settings: 8 [ 16.323511] em28xx #0: Alternate setting 0, max size= 0 [ 16.323517] em28xx #0: Alternate setting 1, max size= 0 [ 16.323523] em28xx #0: Alternate setting 2, max size= 1448 [ 16.323530] em28xx #0: Alternate setting 3, max size= 2048 [ 16.323536] em28xx #0: Alternate setting 4, max size= 2304 [ 16.323545] em28xx #0: Alternate setting 5, max size= 2580 [ 16.323551] em28xx #0: Alternate setting 6, max size= 2892 [ 16.323557] em28xx #0: Alternate setting
Bug#592312: feature request latest roundcube stable 0.4.2 debian release
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Vincent, I already read the intentions are there to make a new debian package. I really hope it will be out soon, I got users complaining my head of about anoyences in 0.3.1 and upstream would help me until I use the latest stable. I would also like to see an updated debian release and would use a version from experimental. (on a squeeze machine) However isn't this where the debian backports system is for? It also has a repository for debian squeeze/sid packages. http://www.backports.org/backports.org/dists/squeeze-backports/ http://roundcube.net/download https://bugs.launchpad.net/ubuntu/+source/roundcube/+bug/670246 With kind regards, Jelle de Jong -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) iJwEAQECAAYFAk0m6bMACgkQ1WclBW9j5HktBgP/Yf6YcZdY3Ha6L60Eu0m/vAfR yWLmjtvMPvGuQlzgVSYkCaV0YMo+zXIOlBHTs7pfV4/mKdfLTCKYZ9mHXGUMp98I u4zg1vz0yQ1nmNTv7PztTO2vp85Qh1mJfR9hnOhLHE0xrssbsUN23QRpbjgBxFba 4rcVj0J7hiC6eaJiNy8= =l/zi -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#577925: please release tgt-1.0.13
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Would it be possible (eta?) to make a debian release of tgt version 1.0.13[1] the 1.0.4 version in debian is a bit to old for production or getting community support. [1] http://stgt.sourceforge.net/releases/ Thanks in advance, With kind regards, Jelle de Jong -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) iJwEAQECAAYFAk1W8i4ACgkQ1WclBW9j5Hk4WQP/US4knXbMUSA+PXCMB/rV5M1p lF2SDAAENPqnADycRskndUnFEq/qoO3c3eJUTfsBGl7Js4FXr5fawi0/wNfq/5Of 0m/ReaUBmYUbwZRWSlHZ9TfSPBdLZVIsobAl9PohYbJg43/WFixRZLUzU1cV3Boo rxcOoRLDRvvGo6BzYCg= =jrSr -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#509825: xserver-xorg-video-intel: lockups on eeepc 901 Mobile 945GM, FatalError re-entered, aborting
Dear Cyril, On 23-02-11 01:55, Cyril Brulebois wrote: Jelle de Jong jelledej...@powercraft.nl (26/12/2008): Package: xserver-xorg-video-intel Version: 2:2.3.2-2+lenny5 Severity: normal I have been experiencing lockups of my xorg for a while now […] is is better with a squeeze or sid system? I have switched to an other laptop as my main system, and I can't do the testing any-more on the eeepc. The report was filled more then a year ago. With kind regards, Jelle de Jong -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#500345: evince xfce gtk enviorment unable to open external links
Sven Arvidsson wrote: Hi, iceweasel-gnome-support version 3.0.4-1 should now handle gnome-www-browser and fix this bug. Thank you, for providing the information. Would it also be possible to add x-www-browser to evince as failsafe because the iceweasel-gnome-support add a lot of gnome dependencies to the system witch are unwanted in a non gnome environment that just want to use the evince as pdf viewer. Thank in advance, Jelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500330: totem-xine: when totem plays video, the oowriter menu keeps comming down
Tim Connors wrote: On Mon, 29 Sep 2008, Josselin Mouette wrote: Le samedi 27 septembre 2008 � 12:59 +0200, Jelle de Jong a �crit : Ok this is a strange bug, and took me a lots of time to find the program causing it. When oowriter has the focus, and there is totem-xine process somehwere playing video not audio but only with video, the file menu of oowriter keeps coming down making it inpossible to work effectively. I made sure it is no external hardware event. by removing all other usb devcies on my eeepc 701 platform. The bug also happens when watching or listing to dvb-t tv or radio in totem-xine. It does not happen when using kaffeine or playing only audio with totem-xine. This looks like a driver issue. Does it still happen if you disable XVideo (forcing video.driver in ~/.gnome2/config). Does it happen with totem-gstreamer? Nope, it's the anti-screensaver measure - xine presses fake keypresses every 20-30 seconds. See also bugs 506001, 374644 and http://ubuntuforums.org/showthread.php?t=595976 Thank you for taking the time to answer. I highly appreciate this and keep up the good work. To bad this issue is still around it wasted a lot of my time. When can I expect this bug to be fixed and in what version of totem wil this be? Thank in advance, Jelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503391: geany kills documents and personal settings of user when running out of diskspace
Package: geany Version: 0.14-1 Severity: normal OK, this can of course be seen as user error or pebkac, however compared to editors like vim, the behavior is critical damaging. When working on an important document with geany and the user is unaware that his free diskspace is gone, and then just tries to save his document he will lose all his work without any warning, this can both very bad for the working file as for the personal health of the user Please please create some system that does not destroy the working document when running out of diskspace, make it at least possible to undo or redo so the original file can be saved elsewhere where there is enough disk space. Thank in advance, Jelle -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages geany depends on: ii libatk1.0-0 1.22.0-1 The ATK accessibility toolkit ii libc6 2.7-15 GNU C Library: Shared libraries ii libcairo2 1.6.4-6.1 The Cairo 2D vector graphics libra ii libgcc1 1:4.3.2-1 GCC support library ii libglib2.0-0 2.16.6-1 The GLib library of C routines ii libgtk2.0-0 2.12.11-4 The GTK+ graphical user interface ii libpango1.0-0 1.20.5-3 Layout and rendering of internatio ii libstdc++64.3.2-1The GNU Standard C++ Library v3 geany recommends no packages. Versions of packages geany suggests: pn doc-base none (no description available) ii libvte9 1:0.16.14-3 Terminal emulator widget for GTK+ -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500345: (no subject)
I wanted to add that I still have this issue, and also have it on debian lenny and sid. These are really clean fresh installations, but left clicking on weblinks in pdf document does not work. Can somebody please have a look at the issue, it is really annoying not to be able to open links some default webbrowser. Thanks in advance, Jelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500345: (no subject)
Sven Arvidsson wrote: On Sat, 2008-10-25 at 21:24 +0200, Jelle de Jong wrote: I wanted to add that I still have this issue, and also have it on debian lenny and sid. These are really clean fresh installations, but left clicking on weblinks in pdf document does not work. Can somebody please have a look at the issue, it is really annoying not to be able to open links some default webbrowser. Hi, Isn't this basically what bug 345438 was about? I don't now about that bug I read this bug mail [1] it is marked as done in 2006, and I still got the issue so I don't think its related or its an regression. I only now I need as solution... How can I get evince to work and open weblinks with for example firefox, iceweasel, icecat? [1] http://lists.alioth.debian.org/pipermail/pkg-gnome-maintainers/2006-January/021003.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500345: (no subject)
Sven Arvidsson wrote: On Sun, 2008-11-02 at 15:01 +0100, Jelle de Jong wrote: Isn't this basically what bug 345438 was about? I don't now about that bug I read this bug mail [1] it is marked as done in 2006, and I still got the issue so I don't think its related or its an regression. I only now I need as solution... How can I get evince to work and open weblinks with for example firefox, iceweasel, icecat? [1] http://lists.alioth.debian.org/pipermail/pkg-gnome-maintainers/2006-January/021003.html I should clarify, if my understanding of bug 345438 isn't wrong, sensible-browser should be used by default, instead of gnome-www-browser. sensible-browser checks for GNOME and runs gnome-www-browser, if not, x-www-browser is run. I could be entirely wrong of course, and there's a good reason gnome-www-browser is used. $ whereis gnome-www-browser gnome-www-browser: $ whereis x-www-browser x-www-browser: /usr/bin/x-www-browser /usr/share/man/man1/x-www-browser.1.gz $ x-www-browser ... iceweasel is started So how does it checks for gnome ... or how can i force it not to check for gnome...? I still got the issue. If you can get it fixed upstream i will sent you some dutch stroopwafels :-p -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#568922: mdadm: data-check of RAID array md0 results in soft lockup of CPU's
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: mdadm Version: 2.6.7.2-3 Severity: important *** Please type your report below this line *** Every time mdadm is executing its automatic data-check my system will receive multiple soft locks, creating a temporary dos on my server. Please see the attached file with the dump of the relevant syslog/kernlog. I don't think I did anything special on my system or used out of ordinary set-up. The soft lock happen on a production server that need to stay secure and running. Any idea's why this problem is occurring? Thanks in advance, - -- Package-specific info: - --- mount output /dev/mapper/lvm0--vol-root on / type ext3 (rw) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/mapper/lvm0--vol-home on /home type ext3 (rw) - --- mdadm.conf # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST system # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md0 level=raid1 num-devices=3 UUID=3947d6c9:0d213ff7:50d4015c:b695ae2a # This file was auto-generated on Sun, 06 Dec 2009 22:57:42 + # by mkconf $Id$ - --- /proc/mdstat: Personalities : [raid1] md0 : active raid1 sdb1[0] sdc1[2] sda1[1] 312560576 blocks [3/3] [UUU] unused devices: none - --- /proc/partitions: major minor #blocks name 80 312571224 sda 81 312560640 sda1 8 16 312571224 sdb 8 17 312560640 sdb1 8 32 312571224 sdc 8 33 312560640 sdc1 90 312560576 md0 2530 16777216 dm-0 2531 293601280 dm-1 2532 524288 dm-2 - --- initrd.img-2.6.30-2-amd64: 41993 blocks 374d80ee1e41d3577c14d9dd8ac0182b ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/raid10.ko f52bb54b1d0e312d66e7d2dcaacf6610 ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/raid1.ko b5ee43c2da900315a5f468a7fc7b8deb ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/dm-mirror.ko fe93816b5f15caa8969367202ad1b5f3 ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/md-mod.ko fc494462ecbb43bb600841f37ea3bd48 ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/raid6_pq.ko 9c0d90db91e81d95bf9eb477c68d2f25 ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/multipath.ko 8b77a349602de35d073b3d3583c45fb4 ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/raid0.ko c9b3dff6582f388dce219b2c067b33b7 ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/dm-mod.ko 9bf7021d452633c531c7baa7cb0a1241 ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/linear.ko 0f8e9ed3bf5348bebff4433a517340e4 ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/dm-region-hash.ko f838331e20c49fb3bf695a0cf35d6a91 ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/dm-snapshot.ko 1727cc7c84dd125b126314d5b980e992 ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/raid456.ko 50929b5f9e9d604bcd006c675de78cf6 ./lib/modules/2.6.30-2-amd64/kernel/drivers/md/dm-log.ko e1e2d0e985196fecaf41fb42e9968af2 ./scripts/local-top/mdadm ea9abd44166c288560f8c9789cb3949d ./sbin/mdadm 3ff085b6b9ff6c8c3d7a1d6c806820ce ./etc/mdadm/mdadm.conf - --- /proc/modules: dm_mirror 14616 0 - Live 0xa0194000 dm_region_hash 12704 1 dm_mirror, Live 0xa018e000 dm_log 9924 2 dm_mirror,dm_region_hash, Live 0xa0186000 dm_snapshot 22860 0 - Live 0xa017b000 dm_mod 59224 12 dm_mirror,dm_log,dm_snapshot, Live 0xa0167000 raid1 21104 1 - Live 0xa015c000 md_mod 86628 2 raid1, Live 0xa0141000 - --- /var/log/syslog: - --- volume detail: /dev/sda is not recognised by mdadm. /dev/sda1: Magic : a92b4efc Version : 00.90.00 UUID : 73bedc93:4672b810:9eb0d0b7:fd848b7d Creation Time : Mon Dec 7 13:32:04 2009 Raid Level : raid1 Used Dev Size : 312560576 (298.08 GiB 320.06 GB) Array Size : 312560576 (298.08 GiB 320.06 GB) Raid Devices : 3 Total Devices : 3 Preferred Minor : 0 Update Time : Mon Feb 8 21:35:53 2010 State : clean Active Devices : 3 Working Devices : 3 Failed Devices : 0 Spare Devices : 0 Checksum : a8c14ebb - correct Events : 8 Number Major Minor RaidDevice State this 1 811 active sync /dev/sda1 0 0 8 170 active sync /dev/sdb1 1 1 811 active sync /dev/sda1 2 2
Bug#566309: linux-image-2.6.30-2-686: aes.ko depends on device specific padlock-aes.ko
Package: linux-image-2.6.30-2-686 Version: 2.6.30-8squeeze1 Severity: normal Waiting for /dev to be fully populated...modprobe: WARNING: Error inserting padlock_aes (/lib/modules/2.6.30-2-686/kernel/drivers/crypto/padlock-aes.ko): No such device # uname -a Linux alix07 2.6.30-2-686 #1 SMP Fri Dec 4 00:53:20 UTC 2009 i586 GNU/Linux # modprobe --show-depends aes insmod /lib/modules/2.6.30-2-686/kernel/crypto/aes_generic.ko insmod /lib/modules/2.6.30-2-686/kernel/drivers/crypto/padlock-aes.ko insmod /lib/modules/2.6.30-2-686/kernel/crypto/aes_generic.ko insmod /lib/modules/2.6.30-2-686/kernel/arch/x86/crypto/aes-i586.ko insmod /lib/modules/2.6.30-2-686/kernel/crypto/aes_generic.ko -- Package-specific info: ** Version: Linux version 2.6.30-2-686 (Debian 2.6.30-8squeeze1) (da...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Fri Dec 4 00:53:20 UTC 2009 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-2-686 root=UUID=a8776f1f-9454-4b64-940d-9ac7a8cbe639 ro init=/sbin/bootchartd elevator=deadline acpi=off ipv6.disable=1 console=ttyS0,115200 quiet ** Not tainted ** Kernel log: [1.186897] Uniform Multi-Platform E-IDE driver [1.194461] amd74xx :00:0f.2: UDMA100 controller [1.194485] amd74xx :00:0f.2: IDE controller (0x1022:0x209a rev 0x01) [1.194548] amd74xx :00:0f.2: IDE port disabled [1.194607] amd74xx :00:0f.2: not 100% native mode: will probe irqs later [1.194637] ide0: BM-DMA at 0xff00-0xff07 [1.194660] Probing IDE interface ide0... [1.480086] hda: CF CARD 4GB, CFA DISK drive [2.152143] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO5 [2.152427] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33 [2.152446] hda: UDMA/33 mode selected [2.152736] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [2.581360] ide-gd driver 1.18 [2.581478] hda: max request size: 128KiB [2.581497] hda: 7847280 sectors (4017 MB) w/1KiB Cache, CHS=7785/16/63 [2.581678] hda: hda1 [3.704113] kjournald starting. Commit interval 5 seconds [3.704154] EXT3-fs: mounted filesystem with ordered data mode. [6.745041] udevd version 125 started [ 12.314647] AMD Geode RNG detected [ 12.523132] cs5535_gpio: base=0x6100 mask=0xb003c66 major=252 [ 12.697696] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 12.933276] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 12.933364] via-rhine :00:09.0: setting latency timer to 64 [ 12.940310] eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:b9:1b:55:c8, IRQ 10. [ 12.941049] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link . [ 12.941116] via-rhine :00:0a.0: setting latency timer to 64 [ 12.948038] eth1: VIA Rhine III (Management Adapter) at 0x11400, 00:0d:b9:1b:55:c9, IRQ 11. [ 12.948774] eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link . [ 13.762446] usbcore: registered new interface driver usbfs [ 13.762590] usbcore: registered new interface driver hub [ 13.779415] usbcore: registered new device driver usb [ 13.799088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.832070] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 14.675647] padlock: VIA PadLock not detected. [ 15.603453] geode-aes: GEODE AES engine enabled. [ 15.604749] ehci_hcd :00:0f.5: setting latency timer to 64 [ 15.604774] ehci_hcd :00:0f.5: EHCI Host Controller [ 15.604954] ehci_hcd :00:0f.5: new USB bus registered, assigned bus number 1 [ 15.627344] ehci_hcd :00:0f.5: irq 12, io mem 0xefffd000 [ 15.639256] ehci_hcd :00:0f.5: USB 2.0 started, EHCI 1.00 [ 15.639355] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 15.639377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.639398] usb usb1: Product: EHCI Host Controller [ 15.639415] usb usb1: Manufacturer: Linux 2.6.30-2-686 ehci_hcd [ 15.639432] usb usb1: SerialNumber: :00:0f.5 [ 15.639800] usb usb1: configuration #1 chosen from 1 choice [ 15.639988] hub 1-0:1.0: USB hub found [ 15.640031] hub 1-0:1.0: 4 ports detected [ 15.641939] ohci_hcd :00:0f.4: setting latency timer to 64 [ 15.641965] ohci_hcd :00:0f.4: OHCI Host Controller [ 15.642133] ohci_hcd :00:0f.4: new USB bus registered, assigned bus number 2 [ 15.642196] ohci_hcd :00:0f.4: irq 12, io mem 0xefffe000 [ 15.727115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.727140] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.727160] usb usb2: Product: OHCI Host Controller [ 15.727202] usb usb2: Manufacturer: Linux 2.6.30-2-686 ohci_hcd [ 15.727220] usb usb2: SerialNumber: :00:0f.4 [ 15.727602] usb usb2: configuration #1 chosen from 1 choice [ 15.727790] hub 2-0:1.0: USB hub found [ 15.727834] hub 2-0:1.0: 4 ports detected [ 16.255229] usb 2-2: new full speed USB device using
Bug#499946: request to package version 0.9
Hello everybody, I did some testing today with iceowl 0.8.6 and there were to much bugs to make it usable, so please update the package :-p https://bugzilla.mozilla.org/show_bug.cgi?id=462858 https://bugzilla.mozilla.org/show_bug.cgi?id=462859 https://bugzilla.mozilla.org/show_bug.cgi?id=348009 https://bugzilla.mozilla.org/show_bug.cgi?id=454664 Thanks in advance, Jelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#505143: zd1211-firmware: pluscom wu-zd1211b, firmware not working (RF MAXIM_NEW_RF 0x8 is not supported)
Package: zd1211-firmware Version: 2.21.0.0-0.1 Severity: normal I bought bunch of wireless dongles with a zd1211b chipset, but they don't work (yet). Who would be the best person to contact to get support for the device? I hope the debian maintainer can get this report to the right persons to show this. If there is more information needed then the below please tell me: Thanks in advance, Jelle [38534.984767] usb 5-3.1: new high speed USB device using ehci_hcd and address 36 [38535.083964] usb 5-3.1: configuration #1 chosen from 1 choice [38535.157063] usb 5-3.1: reset high speed USB device using ehci_hcd and address 36 [38535.257846] phy16: Selected rate control algorithm 'pid' [38535.261616] zd1211rw 5-3.1:1.0: phy16 [38535.261859] usb 5-3.1: New USB device found, idVendor=0ace, idProduct=1215 [38535.261869] usb 5-3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=0 [38535.261876] usb 5-3.1: Product: USB2.0 WLAN [38535.261881] usb 5-3.1: Manufacturer: ZyDAS [38535.262006] firmware: requesting zd1211/zd1211b_ub [38535.280859] firmware: requesting zd1211/zd1211b_uphr [38535.340746] zd1211rw 5-3.1:1.0: RF MAXIM_NEW_RF 0x8 is not supported [40703.347091] firmware: requesting zd1211/zd1211b_ub [40703.369536] firmware: requesting zd1211/zd1211b_uphr [40828.394683] firmware: requesting zd1211/zd1211b_ub [40828.410706] firmware: requesting zd1211/zd1211b_uphr [40829.472870] usb 5-3.1: USB control request for firmware upload failed. Error number -110 [40829.472888] usb 5-3.1: Could not upload firmware code uph. Error number -110 [40829.472969] zd1211rw 5-3.1:1.0: couldn't load firmware. Error number -110 -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash zd1211-firmware depends on no packages. zd1211-firmware recommends no packages. Versions of packages zd1211-firmware suggests: pn zd1211-module none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500712: problem is not reproducible anymore, fixed?
Hello everybody, I did some testing on bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=500712 And It seem I am unable to reproduce the delay, so I think the problem is fixed? Any ideas how? it appears to be the same kernel and firmware... Version: 2.21.0.0-0.1 Suggests: zd1211-module Filename: pool/non-free/z/zd1211-firmware/zd1211-firmware_2.21.0.0-0.1_all.deb uname -a Linux debian-eeepc 2.6.26-1-686 #1 SMP Sat Oct 18 16:22:25 UTC 2008 i686 GNU/Linux cat /proc/version Linux version 2.6.26-1-686 (Debian 2.6.26-9) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Oct 18 16:22:25 UTC 2008 btw i found this: E: Package zd1211-module has no installation candidate I still have a bunch of other non working zd1211b devices see: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=505143 Best regards, Jelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#513092: ITP: pct-support-scripts -- pct support scripts for irc chat, ssh and remote vnc support
Package: wnpp Severity: wishlist Owner: Jelle de Jong jelledej...@powercraft.nl I would like to get this program into the debian repository, I will package it and upload it to debian mentors, I will be looking for a sponser and mentor. This package is part of a larger group of packages that will form the pct-desktop-environment that I have been working on. Package name: pct-support-scripts Version : 0.1.1 Upstream Author : Jelle de Jong jelledej...@powercraft.nl URL : https://secure.powercraft.nl/svn/packages/trunk/deb/pct-support-scripts/ License : GPLv3+ Programming Lang: BASH Description : pct support scripts for irc chat, ssh and remote vnc support This is a collection of easy scripts developed to provide remote support for Ubuntu and Debian GNU/Linux users. The scripts defaults settings are to be used with the support systems of PowerCraft Technology, but it is easy to use the scripts options and configuration files to use other support systems. The scripts are designed to use ssh secure tunneling so aslong outside connections are allowed on port 22 the systems will work with a gateway server in between, this will make it possible to provide support to users behind nats and firewalls. The package is maintained by PowerCraft Technology. -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (990, 'unstable'), (50, 'experimental') Architecture: i386 (i686) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#513493: imagemagick: convert crashes when convering large jpg to pdf in screen -S environment, strace included
Bastien ROUCARIES wrote: I had some serious issues with my scanner systems, when using the command: pct-scanner-script --config lineart2 --clean form a xterm it all works perfect. But when using the commnad: screen -S scanner pct-scanner-script --config lineart2 --clean it did not work anymore, so i went debugging and found the cause to be convert haning on the creation of a jpg to pdf. I created a strace of convert showing some issues.. I hope this can be fixed convert is now not usable for me. Convert delegate the conversion to pdf to ghostscript. Could you run convert with -debug trace in order to know where it hang? And could you give us a test case, ie the input file and the convert command line used? Regards Bastien Hi Bastien, I have been testing and testing, driving myself crazy ;-( and I don't think convert is the main reason why it goes wrong I posted this mail to the sane-devel list: http://lists.alioth.debian.org/pipermail/sane-devel/2009-January/023779.html It would be really nice if you can see why it goes wrong with convert... I will run with -debug trace and sent it to the bug tracker. Best regards, Jelle -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#513493: imagemagick: convert crashes when convering large jpg to pdf in screen -S environment, strace included
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jelle de Jong wrote: Bastien ROUCARIES wrote: I had some serious issues with my scanner systems, when using the command: pct-scanner-script --config lineart2 --clean form a xterm it all works perfect. But when using the commnad: screen -S scanner pct-scanner-script --config lineart2 --clean it did not work anymore, so i went debugging and found the cause to be convert haning on the creation of a jpg to pdf. I created a strace of convert showing some issues.. I hope this can be fixed convert is now not usable for me. Convert delegate the conversion to pdf to ghostscript. Could you run convert with -debug trace in order to know where it hang? And could you give us a test case, ie the input file and the convert command line used? Regards Bastien Hi Bastien, I have been testing and testing, driving myself crazy ;-( and I don't think convert is the main reason why it goes wrong I posted this mail to the sane-devel list: http://lists.alioth.debian.org/pipermail/sane-devel/2009-January/023779.html It would be really nice if you can see why it goes wrong with convert... I will run with -debug trace and sent it to the bug tracker. Best regards, Jelle Hello everybody, as a follow up, I made an evil workaround for the issues, please see: http://lists.alioth.debian.org/pipermail/sane-devel/2009-January/023782.html I don't think convert was the problem it just received an unwanted SIGHUP (Hangup) when doing its work :-( Bastien thank you for the quick responses, this is really appreciated, keep up the good work. Best regards, Jelle de Jong -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAkmCTYQACgkQ1WclBW9j5HkLTAQAjt/4i57j06Y5T0R1DqEiFkK6 8HXcs/YVKNgi5gmnQNPrNB7g5yiDshXxK85RFBhCsgMpTfoXWzHf6U1pLZkL3Ckn VNOiaG2RVRkSd+tztkpmSS8XYSPMOtFjLUA6w969a2cbINtEgVSlyGr1yYTWtUfN ykl6ixZoHS3RsHQFMxQ= =ciO/ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#509607: request: bridge-utils package
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 request for emdebian package for bridge-utils apt-cache show bridge-utils Package: bridge-utils Priority: optional Section: net Installed-Size: 108 Maintainer: Santiago Garcia Mantinan ma...@debian.org Architecture: i386 Version: 1.4-5 Depends: libc6 (= 2.7-1) Recommends: ifupdown Conflicts: ifupdown ( 0.6.0) Filename: pool/main/b/bridge-utils/bridge-utils_1.4-5_i386.deb Size: 31176 MD5sum: c4ed0001a2e15cdd55f91886979cbba4 SHA1: fda51d199a353bdd540e9efb76d6782ba755af6f SHA256: fe02af0114aaf68af0a952d2817f49e7e2b1380b96299d75af81e9aa1c49c3fd Description: Utilities for configuring the Linux Ethernet bridge This package contains utilities for configuring the Linux Ethernet bridge in Linux 2.4 or later. The Linux Ethernet bridge can be used for connecting multiple Ethernet devices together. The connecting is fully transparent: hosts connected to one Ethernet device see hosts connected to the other Ethernet devices directly. Tag: interface::commandline, network::configuration, network::routing, protocol::ethernet, role::program, scope::utility, use::routing -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAkmKBoAACgkQ1WclBW9j5Hm6LQP/ci+Z/qDOul1LFxz47t7UKs32 OEpZnd+2IDl+/owl+bAZXtHl1F1j8Wf0ip5CAeVE+xE4DI+RQfA8/y3eF9mqebtf 5bYJxeshn1Q+kmRaGE00gv3q12saLBsFZtDZZRP1+vhrjNygrP4OqKDzE8MZvW47 N1sZ4Ab4Hxb+KI015vA= =IoMP -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#491210: closed by Bartosz Fenski fe...@debian.org (Bug#491210: fixed in sshfs-fuse 2.2-1)
Thanks :-) Was it my work or did I spent a day working on the debdiff for noting ;-( Best regards, Jelle -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#491210: closed by Bartosz Fenski fe...@debian.org (Bug#491210: fixed in sshfs-fuse 2.2-1)
Jelle de Jong wrote: Thanks :-) Was it my work or did I spent a day working on the debdiff for noting ;-( Best regards, Jelle I saw the changelog, thank you :-D * New upstream version. - allows mounting locations with , character (Closes: #502579) * changes by Jelle de Jong - thanks! (Closes: #491210) - Bumped Standards-Version to 3.8.0 - Bumped debhelper compat version - Provides sshfs-debug package * Mentions FUSE in description (Closes: #510369) Best regards, Jelle -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#389591: ITP: freeswitch
Is there any new news on this? What are the problems that prevent the packaging? Thanks in advance, Jelle -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#543138: iftop does not notice changes to ppp interfaces and stops refreshing its output
Package: iftop Version: 0.17-14 Severity: normal I run iftop with the following command /usr/sbin/iftop -i ppp0 -B -p inside a screen session to output information on a display 24/H to users. However the ppp0 interfaces sometimes goes down and automaticly up again. This is normal in since its a mobile interface depending on signal strength. However iftop does not check changes to the interfaces and will just hang and stop displaying any traffic. I can repeat this behavior very easily. Could this please be fixed so I can use iftop for 24/H displaying. (monitoring is done, with other tools) Thanks in advance, Jelle de Jong -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (100, 'testing'), (100, 'stable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.31-rc6-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages iftop depends on: ii libc6 2.9-25GNU C Library: Shared libraries ii libncurses55.7+20090803-1+b1 shared libraries for terminal hand ii libpcap0.8 1.0.0-2 system interface for user-level pa iftop recommends no packages. iftop suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#529621: udev changed groupid for usb scanner/printer causing saned setup to break
I did some more investigation because the errors I got in syslog did not explain any defects. So I seems an updated changed the udev device permissions to make the scanner have a lp instead of scanner groupid... # sudo -u saned scanimage --help # hp-check -r HP Device 0x5b11 at 001:005: Device URI: hp:/usb/Officejet_J5700_series?serial=CN7BOCF3HP04TC Device node: /dev/bus/usb/001/005 Mode: 0664 # ls -hal /dev/bus/usb/001/005 crw-rw-r-- 1 root lp 189, 4 2009-05-20 18:15 /dev/bus/usb/001/005 # groups saned saned scanner # adduser saned lp Adding user `saned' to group `lp' ... Adding user saned to group lp Done. # groups saned saned lp scanner Clients can scan again, bug can be closed, or check the udev packages to see if the lp vs saned group id is correct? Best regards, Jelle de Jong -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#529621: sane-utils: saned network scanner stoped working after updates
Package: sane-utils Version: sane-utils_1.0.19-23ubuntu7_amd64.deb Severity: normal May 20 17:12:39 ashley kernel: [775073.209229] usb 1-4: USB disconnect, address 4 May 20 17:13:04 ashley kernel: [775098.010033] usb 1-4: new high speed USB device using ehci_hcd and address 5 May 20 17:13:04 ashley kernel: [775098.161099] usb 1-4: configuration #1 chosen from 1 choice May 20 17:13:04 ashley kernel: [775098.165095] usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5B11 May 20 17:13:24 ashley saned[22701]: saned (AF-indep+IPv6) from sane-backends 1.0.19 starting up May 20 17:13:24 ashley saned[22701]: check_host: access by remote host: 192.168.1.239 May 20 17:13:24 ashley saned[22701]: init: access granted to je...@192.168.1.239 May 20 17:13:25 ashley saned[22701]: io/hpmud/musb.c 135: unable get_string_descriptor -1: Operation not permitted May 20 17:13:25 ashley saned[22701]: io/hpmud/musb.c 1995: invalid product id string ret=-1 May 20 17:13:25 ashley saned[22701]: io/hpmud/musb.c 135: unable get_string_descriptor -1: Operation not permitted May 20 17:13:25 ashley saned[22701]: io/hpmud/musb.c 2000: invalid serial id string ret=-1 May 20 17:13:25 ashley saned[22701]: saned exiting # cat /etc/xinetd.d/saned # default: off # description: The sane server accepts requests # for network access to a local scanner via the # network. service sane-port { port= 6566 socket_type = stream wait= no user= saned group = saned groups = yes server = /usr/sbin/saned } # dpkg -S /usr/sbin/saned sane-utils: /usr/sbin/saned # dpkg -l | grep sane-utils ii sane-utils 1.0.19-26 API library for scanners -- utilities Scanner is not found on clients see the above syslog errors, the device is found on the server. The device is also used in a cups print server and it works find on the clients. What is going on? Why does it not work anymore? # scanimage --help List of available devices: hpaio:/usb/Officejet_J5700_series?serial=CN7BOCF3HP04TC Best regards, Jelle de Jong -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (100, 'testing'), (100, 'stable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages sane-utils depends on: ii adduser 3.110 add and remove users and groups ii debconf [debconf-2.0]1.5.26 Debian configuration management sy ii libavahi-client3 0.6.25-1Avahi client library ii libavahi-common3 0.6.25-1Avahi common library ii libc62.9-12 GNU C Library: Shared libraries ii libieee1284-30.2.11-5cross-platform library for paralle ii libsane 1.0.20-4API library for scanners ii libusb-0.1-4 2:0.1.12-13 userspace USB programming library ii update-inetd 4.31inetd configuration file updater Versions of packages sane-utils recommends: pn avahi-daemon none (no description available) Versions of packages sane-utils suggests: pn unpaper none (no description available) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#529920: i have the same problem
Hello everybody, I can confirm this issue, http://debian.pastebin.com/d1df1f332 I have the same issue with all my subversion repositories. I am using an older Debian kernel because the latest one makes my system crash regularly... Linux debian-eeepc 2.6.26-2-686 #1 SMP Thu Mar 26 01:08:11 UTC 2009 i686 GNU/Linux Best regards, Jelle -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#513493: [debian][resend] Bug#513493: scanadf crash imagemagick maybe related
Bastien ROUCARIES wrote: [Prod you] [resend interesting part] I was perhaps not clear. Strace file are interesting I agree, but I need a convet -debug trace execution wihout strace. strace is pretty hard to read. Regards Bastien Hi Bastien, I can sent you a -debug trace if you really want it. But I found the issue and it is related how scanadf starts the processing scrip that just sent a SIGHUP to convert. I would be ok to close this bugs or sent it to scanadf tool. Btw are you at fosdem or could you not make it? Cheers, Jelle -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#512067: bug has been fixed/resolved
Hello everybody, With the last changes to emdebian debootstrap system the bug is resolved. I am closing the bug report. My latest debootstrap was successful. Best regards, Jelle de Jong -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#512066: bug has been fixed/resolved
Hello everybody, With the last changes to emdebian debootstrap system the bug is resolved. I am closing the bug report. Best regards, Jelle de Jong -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#509825: adding extra report of crashed intel xorg
apt-show-versions | grep xserver-xorg xserver-xorg/unstable uptodate 1:7.3+18 xserver-xorg-core/unstable uptodate 2:1.4.2-10 xserver-xorg-input-all/unstable uptodate 1:7.3+18 xserver-xorg-input-evdev/unstable uptodate 1:2.0.8-1 xserver-xorg-input-kbd/unstable uptodate 1:1.3.1-1 xserver-xorg-input-mouse/unstable uptodate 1:1.3.0-1 xserver-xorg-input-synaptics/unstable uptodate 0.14.7~git20070706-3 xserver-xorg-input-wacom/unstable uptodate 0.8.1.6-1 xserver-xorg-video-intel/unstable uptodate 2:2.3.2-2+lenny6 X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-10) Current Operating System: Linux debian-eeepc 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 Build Date: 09 January 2009 02:57:16AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Tue Feb 10 11:22:39 2009 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Configured Monitor (**) | |--Device Configured Video Device (**) Option BlankTime 0 (**) Option StandbyTime 0 (**) Option SuspendTime 0 (**) Option OffTime 0 (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to /etc/X11/rgb (==) ModulePath set to /usr/lib/xorg/modules (==) |--Input Device Configured Mouse (==) |--Input Device Generic Keyboard (==) The core pointer device wasn't specified explicitly in the layout. Using the first core pointer device. (==) The core keyboard device wasn't specified explicitly in the layout. Using the first keyboard device. (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x81e38c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: pcidata (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (--) using VT number 3 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,27ac card 1043,830f rev 03 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,27ae card 1043,830f rev 03 class 03,00,00 hdr 80 (II) PCI: 00:02:1: chip 8086,27a6 card 1043,830f rev 03 class 03,80,00 hdr 80 (II) PCI: 00:1b:0: chip 8086,27d8 card 1043,831a rev 02 class 04,03,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,27d0 card , rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:1: chip 8086,27d2 card , rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:2: chip 8086,27d4 card , rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:3: chip 8086,27d6 card , rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1d:0: chip 8086,27c8 card 1043,830f rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,27c9 card 1043,830f rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,27ca card 1043,830f rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,27cb card 1043,830f rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,27cc card 1043,830f rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card , rev e2 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,27b9 card 1043,830f rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:2: chip 8086,27c4 card 1043,830f rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:3: chip 8086,27da card 1043,830f rev 02 class 0c,05,00 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:28:0), (0,5,5), BCTRL: 0x0002 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 4: bridge is at (0:28:1), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:28:2), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:28:3), (0,1,2), BCTRL: 0x0002 (VGA_EN
Bug#510349: please add --grabkeyboard option for xtightvncviewer to make keyboard work for window managers like xfwm4
Package: xtightvncviewer Version: 1.3.9-4 Severity: wishlist I have been doing some experimentation with xtightvncviewer, it works great witout a window manager (so only plain xterm and X running), but I use the xfwm4 window manager on my normal working system and when I start xtightvncviewer with --fullscreen the keys of my keyboard are not going to the vnc session, they only appear on the terminal where xtightvncviewer was started. I use the following server: x11vnc -rfbauth ~/.vnc/passwd -ncache -shared -forever -localhost -noxrandr -display :0 I use the following client: xtightvncviewer -fullscreen -compresslevel 9 -quality 0 -bgr233 localhost:0 I would like to see a -grabkeyboard and --grabkeyboard option added if possible? I also tested xvnc4viewer and there the keyboard worked fine: xvnc4viewer -FullScreen -LowColourLevel -Shared localhost:0 Any ideas or comments? Best regards, Jelle de Jong -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable'), (100, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages xtightvncviewer depends on: ii libc6 2.7-16GNU C Library: Shared libraries ii libice62:1.0.4-1 X11 Inter-Client Exchange library ii libjpeg62 6b-14 The Independent JPEG Group's JPEG ii libsm6 2:1.1.0-1 X11 Session Management library ii libx11-6 2:1.1.5-2 X11 client-side library ii libxaw72:1.0.4-2 X11 Athena Widget library ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxmu62:1.0.4-1 X11 miscellaneous utility library ii libxpm41:3.5.7-1 X11 pixmap library ii libxt6 1:1.0.5-3 X11 toolkit intrinsics library ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages xtightvncviewer recommends: ii xfonts-base 1:1.0.0-5 standard fonts for X Versions of packages xtightvncviewer suggests: ii ssh 1:5.1p1-4 secure shell client and server (me pn tightvncservernone (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#510351: xfwm4 does fails to sent keyboard events to the xtightvncviewer vnc session
Package: xfwm4 Version: 4.4.2-5 Severity: normal xfwm4 does fails to sent keyboard events to the xtightvncviewer vnc session When starting xtightvncviewer with -fullscreen on a system that runs the xfwm4 window manager the keyevents fail to go to the svn session. I tested the matchbox-window-manager and it worked fine there it also works fine without a window manager, the openbox window manager had the same issue. I did not test metacity or any other window managers. See also: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=510349 X environment: (without x-session-manager or x-window-manager set) startx - xfwm4 --daemon - xfce4-terminal I use the following server: x11vnc -rfbauth ~/.vnc/passwd -ncache -shared -forever -localhost -noxrandr -display :0 I use the following client: xtightvncviewer -fullscreen -compresslevel 9 -quality 0 -bgr233 localhost:0 I would really like to see this issue go away. Any ideas and comments? Best regards, Jelle de Jong -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable'), (100, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages xfwm4 depends on: ii libatk1.0-01.24.0-1 The ATK accessibility toolkit ii libc6 2.7-16GNU C Library: Shared libraries ii libcairo2 1.6.4-7 The Cairo 2D vector graphics libra ii libfontconfig1 2.6.0-3 generic font configuration library ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libglib2.0-0 2.16.6-1 The GLib library of C routines ii libgtk2.0-02.12.11-4 The GTK+ graphical user interface ii libice62:1.0.4-1 X11 Inter-Client Exchange library ii libpango1.0-0 1.20.5-3 Layout and rendering of internatio ii libpixman-1-0 0.12.0-1 pixel-manipulation library for X a ii libpng12-0 1.2.33-1 PNG library - runtime ii libsm6 2:1.1.0-1 X11 Session Management library ii libstartup-notificatio 0.9-1 library for program launch feedbac ii libx11-6 2:1.1.5-2 X11 client-side library ii libxcomposite1 1:0.4.0-3 X11 Composite extension library ii libxdamage11:1.1.1-4 X11 damaged region extension libra ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxfce4mcs-client34.4.2-4 Client library for Xfce4 configure ii libxfce4mcs-manager3 4.4.2-4 Manager library for Xfce4 configur ii libxfce4util4 4.4.2-3 Utility functions library for Xfce ii libxfcegui4-4 4.4.2-4 Basic GUI C functions for Xfce4 ii libxfixes3 1:4.0.3-2 X11 miscellaneous 'fixes' extensio ii libxrandr2 2:1.2.3-1 X11 RandR extension library ii libxrender11:0.9.4-2 X Rendering Extension client libra ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages xfwm4 recommends: ii librsvg2-common 2.22.3-1 SAX-based renderer library for SVG pn xfce4-mcs-manager none (no description available) pn xfwm4-themes none (no description available) Versions of packages xfwm4 suggests: pn xfce4 none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#510349: please add --grabkeyboard option for xtightvncviewer to make keyboard work for window managers like xfwm4
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Ola, Thank you for your response, Hi Jelle Package: xtightvncviewer Version: 1.3.9-4 Severity: wishlist I have been doing some experimentation with xtightvncviewer, it works great witout a window manager (so only plain xterm and X running), but I use the xfwm4 window manager on my normal working system and when I start xtightvncviewer with --fullscreen the keys of my keyboard are not going to the vnc session, they only appear on the terminal where xtightvncviewer was started. Even if you use shared mode? The -shared option is enabled by default, but to be sure I run some tests but the keyevent are still not going to the vnc session. The command I used: (xtightvncviewer -shared -fullscreen -compresslevel 9 -quality 0 -bgr233 localhost:0) Just to clairify, when using the command without -fullscreen: (xtightvncviewer -compresslevel 9 -quality 0 -bgr233 localhost:0) then the keyevents are working, but when switching to fullscreen the keyevents are lost (F8 will then also not respond anymore) I use the following server: x11vnc -rfbauth ~/.vnc/passwd -ncache -shared -forever -localhost -noxrandr -display :0 I use the following client: xtightvncviewer -fullscreen -compresslevel 9 -quality 0 -bgr233 localhost:0 I would like to see a -grabkeyboard and --grabkeyboard option added if possible? I'm not really sure what this grapkeyboard option would do. Can you describe? There is some special options explaied in the man page of xtightvncviewer. It says something about X resources settings, I tried some things like export grabKeyboard but i have not yet get it to work. But I need an simple command switch because this is much easer to use and to explain to others that need to use the xtightvncviewer. Olmost all other options have command options the grabkeyboard does not yet that is why I am requesting the enhancement. - From the man page: (grabKeyboard, Grab keyboard in full-screen mode. This can help to solve problems with losing keyboard focus. Default false.) Any ideas or other thoughts? Please also see: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=510351 Best regards, Jelle I also tested xvnc4viewer and there the keyboard worked fine: xvnc4viewer -FullScreen -LowColourLevel -Shared localhost:0 Any ideas or comments? Best regards, Ola Best regards, Jelle de Jong -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iJwEAQECAAYFAklcw6EACgkQ1WclBW9j5HmKYgP/VlQppAnPq6pNWOsJpoo25Szg NksoYT8oZhvZ/Ef1OVRVFkgFcX+47ZqCMUDD50nXZzivXg7HqsUdtstVcHHAtLMJ 5GGUDIryolTutJAkZALOCbnVTTaQ3XsYEpC0z4YaR+xpEB11qhx/Jt7y4T+4QBjg uPIF5VN0D/0mLxyYnKQ= =VN+l -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#510351: [Pkg-xfce-devel] Bug#510351: xfwm4 fails to sent keyboard events to the xtightvncviewer vnc session
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Daniel, Thank your for your response, Package: xfwm4 Version: 4.4.2-5 Severity: normal xfwm4 fails to sent keyboard events to the xtightvncviewer vnc session When starting xtightvncviewer with -fullscreen on a system that runs the xfwm4 window manager the keyevents fail to go to the svn session. Do you do more than fullscreen? Does it do the same thing when you start not fullscreen and go fullscreen later. Do you have more than one monitor? I have done some more testing, and yes when I start not fullscreen the keyevent works fine, when going fullscreen the events are lost and I can't use the keyboard in the vnc session (F8 also does not work I use ^C to terminate the svn session) My test environment are two asus eee pc one eee pc 901 running x11vnc server with only vga output and 1440x900 visual buffer (xorg) and one eeepc 701 client lvds with 800x600 visual buffer running xtightvncviewer over several ssh gateways. But I don't think the the server side is to blame, xvnc4viewer did worked fine with both x11vnc and xfwm4. I think there is a issue with the keyboard grabbing with xfwm4 and xtightvncviewer I ask these questiong because I am another use who has tried xtightvncviewer while using xfwm4 and I didn't have the problem you described, except when I clicked on my second screen and then was unable to send keyboard events to xtightvncviewer, however I believe that to be a tightvnc problem not xfwm4 (it has also happened to other users). Are you sure it's the window manager? I cant be 100% sure that is is the window manager, but it is a combination of the window manager and the xtightvncviewer. That is why i also posted this bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=510349 I have read you have done your fair amount of remote windows systems to so you may have a better idea why it is not working as hoped. Any ideas or other thoughts, Best regards, Jelle -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iJwEAQECAAYFAklc2VsACgkQ1WclBW9j5HlvNQP/Suhg9WlWduAjXBiPzYZkCdf7 qnNrR7GG4WIJ0fUhLvJfzg3re7BaipID9wH5EO2iUAWU6nRzuhw33jT+0fJI3LOU AcEXUg/YbzK86tFDTok6xBICl/oVYmuzA75HG18jwgUaI0pmpognNbvNuDouBAGE nOqtVZ/Wqp3IgWJLNBg= =NL9y -END PGP SIGNATURE- je...@debian-eeepc:~$ x11vnc -rfbauth ~/.vnc/passwd -shared -forever -localhost -noxrandr -display :0 01/01/2009 13:23:40 passing arg to libvncserver: -rfbauth 01/01/2009 13:23:40 passing arg to libvncserver: /home/jelle/.vnc/passwd 01/01/2009 13:23:40 x11vnc version: 0.9.3 lastmod: 2007-09-30 01/01/2009 13:23:40 Using X display :0 01/01/2009 13:23:40 01/01/2009 13:23:40 -- USEFUL INFORMATION -- 01/01/2009 13:23:40 X DAMAGE available on display, using it for polling hints. 01/01/2009 13:23:40 To disable this behavior use: '-noxdamage' 01/01/2009 13:23:40 01/01/2009 13:23:40 Wireframing: -wireframe mode is in effect for window moves. 01/01/2009 13:23:40 If this yields undesired behavior (poor response, painting 01/01/2009 13:23:40 errors, etc) it may be disabled: 01/01/2009 13:23:40- use '-nowf' to disable wireframing completely. 01/01/2009 13:23:40- use '-nowcr' to disable the Copy Rectangle after the 01/01/2009 13:23:40 moved window is released in the new position. 01/01/2009 13:23:40 Also see the -help entry for tuning parameters. 01/01/2009 13:23:40 You can press 3 Alt_L's (Left Alt key) in a row to 01/01/2009 13:23:40 repaint the screen, also see the -fixscreen option for 01/01/2009 13:23:40 periodic repaints. 01/01/2009 13:23:40 01/01/2009 13:23:40 XFIXES available on display, resetting cursor mode 01/01/2009 13:23:40 to: '-cursor most'. 01/01/2009 13:23:40 to disable this behavior use: '-cursor arrow' 01/01/2009 13:23:40 or '-noxfixes'. 01/01/2009 13:23:40 using XFIXES for cursor drawing. 01/01/2009 13:23:40 GrabServer control via XTEST. 01/01/2009 13:23:40 01/01/2009 13:23:40 Scroll Detection: -scrollcopyrect mode is in effect to 01/01/2009 13:23:40 use RECORD extension to try to detect scrolling windows 01/01/2009 13:23:40 (induced by either user keystroke or mouse input). 01/01/2009 13:23:40 If this yields undesired behavior (poor response, painting 01/01/2009 13:23:40 errors, etc) it may be disabled via: '-noscr' 01/01/2009 13:23:40 Also see the -help entry for tuning parameters. 01/01/2009 13:23:40 You can press 3 Alt_L's (Left Alt key) in a row to 01/01/2009 13:23:40 repaint the screen, also see the -fixscreen option for 01/01/2009 13:23:40 periodic repaints. 01/01/2009 13:23:40 01/01/2009 13:23:40 XKEYBOARD: all 28 must have keysyms accounted for. 01/01/2009 13:23:40 Not automatically switching to -xkb mode. 01/01/2009 13:23:40 If some keys still cannot be typed, try using -xkb. 01/01/2009 13:23:40 Also, remember -remap DEAD for accenting characters. 01/01/2009 13:23:40 X FBPM
Bug#531309: evince: evice stops the save as process when closed after the save action preformed
Package: evince Version: 2.26.1-2 Severity: normal When telling evince to save as a document for example a 30 MB DjVu document and save it to a slower storage location say a sshfs mount. Evince will stop the save process when you close evice, evice should wait or indicate that it is still saving the document. I have corrupted many imported files this way ... because the save process was not complete Please try to fix this, Best regards, Jelle de Jong -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (100, 'testing'), (100, 'stable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.29-2-486 Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages evince depends on: ii gconf2 2.26.0-1 GNOME configuration database syste ii gnome-icon-theme 2.24.0-4 GNOME Desktop icon theme ii libatk1.0-01.26.0-1 The ATK accessibility toolkit ii libc6 2.9-12GNU C Library: Shared libraries ii libcairo2 1.8.6-2+b1The Cairo 2D vector graphics libra ii libdbus-1-31.2.14-2 simple interprocess messaging syst ii libdbus-glib-1-2 0.80-4simple interprocess messaging syst ii libdjvulibre21 3.5.21-3 Runtime support for the DjVu image ii libfontconfig1 2.6.0-3 generic font configuration library ii libfreetype6 2.3.9-4.1 FreeType 2 font engine, shared lib ii libgcc11:4.4.0-5 GCC support library ii libgconf2-42.26.0-1 GNOME configuration database syste ii libglib2.0-0 2.20.1-2 The GLib library of C routines ii libgnome-keyring0 2.26.1-1 GNOME keyring services library ii libgtk2.0-02.16.1-2 The GTK+ graphical user interface ii libice62:1.0.5-1 X11 Inter-Client Exchange library ii libkpathsea4 2007.dfsg.2-6 TeX Live: path search library for ii libnautilus-extension1 2.26.2-3 libraries for nautilus components ii libpango1.0-0 1.24.2-1 Layout and rendering of internatio ii libpoppler-glib4 0.10.6-1 PDF rendering library (GLib-based ii libsm6 2:1.1.0-2 X11 Session Management library ii libspectre10.2.2.ds-1+b1 Library for rendering Postscript d ii libstdc++6 4.4.0-5 The GNU Standard C++ Library v3 ii libt1-55.1.2-3 Type 1 font rasterizer library - r ii libtiff4 3.8.2-11 Tag Image File Format (TIFF) libra ii libx11-6 2:1.2.1-1 X11 client-side library ii libxml22.7.3.dfsg-1 GNOME XML library ii shared-mime-info 0.60-2FreeDesktop.org shared MIME databa ii zlib1g 1:1.2.3.3.dfsg-13 compression library - runtime Versions of packages evince recommends: ii dbus-x11 1.2.14-2 simple interprocess messaging syst ii gvfs 1.2.2-2userspace virtual filesystem - ser Versions of packages evince suggests: pn nautilus none (no description available) pn poppler-data none (no description available) ii unrar 1:3.8.5-2 Unarchiver for .rar files (non-fre -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#189866: awereness ping
Hello everybody, I have been hitting this issue for some years now, the original bugreport is from 2001. Would somebody be willing to do a little coding to enable comments in the preference file. The Explanation: things is not sufficant. I can donate some money or do see if something else can motivate a programmer? Best regards, Jelle de Jong -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#503391: geany should write to file when there is no diskspace
Enrico Tröger wrote: snip This should be enough to close this bug. Regards, Enrico Thank you very much for the work. I also noticed that my favorite undo and redo toolbar buttons are gone i can't find them anymore also not in the settings. What happened? I am using Debian version 0.17-1. Thanks in advance, Jelle -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#537128: dependency on moovida-plugins-bad is broken
Package: moovida Version: 1.0.1-1 Severity: normal Hi all, I am testing to see if I was able to get a Debian UPnP media system up and running but I am unable to get moovida working, the moovida-plugins-bad is missing witch contains the pigment plugin that is mandatory to run moovida. Would it be possible to fix the package and also remove the elisa 0.3.5 package witch is a two year old version that does not work, and is absolete by the new moovida package. I think this bug has a higher severity then normal since the package does not work in its current state. Thanks in advance, Jelle -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (100, 'testing'), (100, 'stable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.30-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages moovida depends on: pn moovida-plugins-bad none (no description available) ii moovida-plugins-good 1.0.1-1Moovida plugins from the good se ii python2.5.4-2An interactive high-level object-o ii python-moovida1.0.1-1Python library for the Moovida med Versions of packages moovida recommends: pn moovida-plugins-ugly none (no description available) moovida suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#535572: debdiff for murrine-themes making some updates and adding some new themes
Package: murrine-themes Version: 0.90.2 Severity: wishlist Hi Yves-Alexis, I updated your package with some new themes and a hole list of other things, would you be willing to upload this package a.s.a.p. So I can use it in my desktop environment for my customers. If i did something incorrect please mentor me :) Thanks in advance, Jelle de Jong -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (100, 'testing'), (100, 'stable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.30-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages murrine-themes depends on: ii gtk2-engines-murrine 0.90.3-1 cairo-based gtk+-2.0 theme engine murrine-themes recommends no packages. murrine-themes suggests no packages. -- no debconf information diff -Nru murrine-themes-0.90.2/debian/changelog murrine-themes-0.90.2+nmu1/debian/changelog --- murrine-themes-0.90.2/debian/changelog 2009-03-19 19:35:22.0 +0100 +++ murrine-themes-0.90.2+nmu1/debian/changelog 2009-07-03 12:03:06.0 +0200 @@ -1,3 +1,16 @@ +murrine-themes (0.90.2+nmu1) unstable; urgency=low + + * Non-maintainer upload + * Added and updated all themes from Andrea Cimitan + * debian/copyright: +- update copyrights +- update layout + * debian/control: +- add list of themes so they can be found with apt searches +- bumped up standards version to 3.8.2 + + -- Jelle de Jong jelledej...@powercraft.nl Fri, 03 Jul 2009 11:26:18 +0200 + murrine-themes (0.90.2) unstable; urgency=low * New upstream release. diff -Nru murrine-themes-0.90.2/debian/control murrine-themes-0.90.2+nmu1/debian/control --- murrine-themes-0.90.2/debian/control 2009-03-19 19:25:22.0 +0100 +++ murrine-themes-0.90.2+nmu1/debian/control 2009-07-03 11:54:53.0 +0200 @@ -3,15 +3,34 @@ Priority: optional Maintainer: Yves-Alexis Perez cor...@debian.org Build-Depends: debhelper (= 7) -Standards-Version: 3.8.1 +Standards-Version: 3.8.2 Package: murrine-themes Architecture: all Depends: gtk2-engines-murrine Description: themes for gtk2 murrine engine - Murrine is an Italian word meaning the glass artworks done by Venicians - glass blowers. The Engine is cairo-based, and it's very fast compared to - clearlooks-cairo and ubuntulooks. + Murrine is an Italian word meaning the glass artworks done by Venicians + glass blowers. The Engine is cairo-based, and it's very fast compared to + clearlooks-cairo and ubuntulooks. This package includes gtk themes for + the Murrine engine and themes for xfwm or metacity window managers. . - This package includes gtk themes for the Murrine engine and themes for xfwm or - metacity window managers. + Themes: + - MurrinaAquaIsh + - MurrinaAzul + - MurrinaBleu + - MurrinaBlue + - MurrinaCandido + - MurrinaCandy + - MurrinaCappuccino + - MurrinaChrome + - MurrinaCream + - MurrinaEalm + - MurrinaFancyCandy + - MurrinaGilouche + - MurrinaLoveGray + - MurrinaNeoGraphite + - MurrinaVerdeOlivo + - MurrineRounded + - MurrineRoundedIcon + - MurrineRoundedLessFramed + - MurrineRoundedLessFramedIcon diff -Nru murrine-themes-0.90.2/debian/copyright murrine-themes-0.90.2+nmu1/debian/copyright --- murrine-themes-0.90.2/debian/copyright 2009-03-19 19:24:24.0 +0100 +++ murrine-themes-0.90.2+nmu1/debian/copyright 2009-07-03 11:40:28.0 +0200 @@ -1,36 +1,63 @@ -This package was debianized by Yves-Alexis Perez cor...@debian.org on -Thu, 25 Jan 2007 18:36:55 +0100 +This package was debianized by: -The packaging is based on metacity-themes Mark Howard m...@tildemh.com +Yves-Alexis Perez cor...@debian.org on Thu, 25 Jan 2007 18:36:55 +0100 -Themes included in this package have been downloaded from -http://cimi.netsons.org/pages/murrine.php +It was downloaded from: -The packages includes themes from different authors: -MurrinaFancyCandy -MurrinaAquaIsh -MurrinaVerdeOlivo -MurrinaGilouche -MurrinaLoveGray --- © Andrea Cimitan andrea.cimi...@gmail.com - -MurrinaBleu -MurrinaBlue -MurrinaAzul --- © 2007-2009 Yves-Alexis Perez cor...@debian.org - - This package is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; version 2 dated June, 1991. - - This package is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this package; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA +http://cimi.netsons.org/pages/murrine.php +http://www.cimitan.com/murrine/themes/list?sort=ascorder
Bug#575109: openoffice.org-writer: unexpected error, oowriter crashed after copy pasting text from a document to an other document
Hi Rene, Rene Engelhard wrote, on 07-05-10 14:46: On Fri, Apr 23, 2010 at 08:18:07PM +0200, Rene Engelhard wrote: On Tue, Mar 23, 2010 at 04:38:48PM +0100, Jelle de Jong wrote: When I copy text from a table of one of my document and copy it to the table of an other document. OpenOffice.org will crash with an unexpected error. It will happen every time when I am working on a document. However it does not crashes immediately after every copy paste action. Upstream thinks this is fixed in the newest 3.2.1 snapshot (though that is a fix in a file for RTF and this isn't RTF, so I am a bit wary about that) Can you plase try the packages from http://people.debian.org/~rene/openoffice.org/3.2.1/? PING? I can of course upload 3.2.1~rc1-1 to experimental this weekend and just close this bug trusting on upstream, but... I can confirm the upload to experimental solved the problem, I can't reproduce the crashes any-more with crafted test document. I have tested 1:3.2.1~rc1-1 for more then a week with production work and so far it been more stable then the version in testing. Thank you for helping out. Kind regards, Jelle -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#568922: mdadm: data-check of RAID array md0 results in soft lockup of CPU's
Hi Tim, Tim Small wrote, on 03/04/10 17:01: What happens if you disable NCQ? Seen similar crap on another system with WD drives, and I suspect a firmware bug. That system was OK with a queue depth of 2 or less. You can confirm this with hdparm -t, I think. This problem should really be assigned to the kernel I suppose, as all that mdadm does is to tell the kernel to execute the check I attached the hdparm information. If I see the problem again I will try to disable the NCQ of the drives if activated. Thanks in advance, Best regards, Jelle # hdparm -t /dev/sda /dev/sdb /dev/sdc /dev/sda: Timing buffered disk reads: 308 MB in 3.05 seconds = 101.09 MB/sec /dev/sdb: Timing buffered disk reads: 310 MB in 3.01 seconds = 103.11 MB/sec /dev/sdc: Timing buffered disk reads: 312 MB in 3.02 seconds = 103.29 MB/sec # hdparm -i /dev/sda /dev/sdb /dev/sdc /dev/sda: Model=WDC WD3202ABYS-02B7A0 , FwRev=02.03B03, SerialNo= WD-WCAT1E314175 Config={ HardSect NotMFM HdSw15uSec SpinMotCtl Fixed DTR5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50 BuffType=unknown, BuffSize=16384kB, MaxMultSect=16, MultSect=?16? CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=625142448 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=no WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7 * signifies the current active mode /dev/sdb: Model=WDC WD3202ABYS-02B7A0 , FwRev=02.03B03, SerialNo= WD-WCAT1E298345 Config={ HardSect NotMFM HdSw15uSec SpinMotCtl Fixed DTR5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50 BuffType=unknown, BuffSize=16384kB, MaxMultSect=16, MultSect=?16? CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=625142448 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=no WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7 * signifies the current active mode /dev/sdc: Model=WDC WD3202ABYS-02B7A0 , FwRev=02.03B03, SerialNo= WD-WCAT1E296502 Config={ HardSect NotMFM HdSw15uSec SpinMotCtl Fixed DTR5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50 BuffType=unknown, BuffSize=16384kB, MaxMultSect=16, MultSect=?16? CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=625142448 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=no WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7 * signifies the current active mode
Bug#505143: zd1211-firmware: pluscom wu-zd1211b, firmware not working (RF MAXIM_NEW_RF 0x8 is not supported)
Hi Christian, Christian Kastner wrote, on 20-03-10 03:53: Geoff seems to have correctly identified the source of this problem. Would it be possible for you to test one of your dongles with a more recent kernel - eg from backports.org? I tested the device and it seems to be working. See the attached document for more information. Thank you, Kind regards, Jelle de Jong $ uname -a Linux mini01 2.6.30-2-686 #1 SMP Fri Dec 4 00:53:20 UTC 2009 i686 GNU/Linux $ cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-2.6.30-2-686 root=UUID=7234a43e-c3d9-41e3-8cc6-837d36da273e ro rootfstype=ext4 ipv6.disable=1 quiet $ cat /var/log/kern.log Mar 20 12:00:01 mini01 kernel: [ 6422.832151] usb 1-7: new high speed USB device using ehci_hcd and address 8 Mar 20 12:00:01 mini01 kernel: [ 6422.965893] usb 1-7: New USB device found, idVendor=0ace, idProduct=1215 Mar 20 12:00:01 mini01 kernel: [ 6422.965907] usb 1-7: New USB device strings: Mfr=16, Product=32, SerialNumber=0 Mar 20 12:00:01 mini01 kernel: [ 6422.965917] usb 1-7: Product: USB2.0 WLAN Mar 20 12:00:01 mini01 kernel: [ 6422.965924] usb 1-7: Manufacturer: ZyDAS Mar 20 12:00:01 mini01 kernel: [ 6422.966165] usb 1-7: configuration #1 chosen from 1 choice Mar 20 12:00:01 mini01 kernel: [ 6423.089165] cfg80211: Using static regulatory domain info Mar 20 12:00:01 mini01 kernel: [ 6423.089171] cfg80211: Regulatory domain: US Mar 20 12:00:01 mini01 kernel: [ 6423.089176] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Mar 20 12:00:01 mini01 kernel: [ 6423.089182] (2402000 KHz - 2472000 KHz @ 4 KHz), (600 mBi, 2700 mBm) Mar 20 12:00:01 mini01 kernel: [ 6423.089188] (517 KHz - 519 KHz @ 4 KHz), (600 mBi, 2300 mBm) Mar 20 12:00:01 mini01 kernel: [ 6423.089194] (519 KHz - 521 KHz @ 4 KHz), (600 mBi, 2300 mBm) Mar 20 12:00:01 mini01 kernel: [ 6423.089200] (521 KHz - 523 KHz @ 4 KHz), (600 mBi, 2300 mBm) Mar 20 12:00:01 mini01 kernel: [ 6423.089206] (523 KHz - 533 KHz @ 4 KHz), (600 mBi, 2300 mBm) Mar 20 12:00:01 mini01 kernel: [ 6423.089212] (5735000 KHz - 5835000 KHz @ 4 KHz), (600 mBi, 3000 mBm) Mar 20 12:00:01 mini01 kernel: [ 6423.089228] cfg80211: Calling CRDA for country: US Mar 20 12:00:01 mini01 kernel: [ 6423.245080] usb 1-7: reset high speed USB device using ehci_hcd and address 8 Mar 20 12:00:01 mini01 kernel: [ 6423.422783] phy0: Selected rate control algorithm 'minstrel' Mar 20 12:00:01 mini01 kernel: [ 6423.424221] zd1211rw 1-7:1.0: phy0 Mar 20 12:00:01 mini01 kernel: [ 6423.424316] usbcore: registered new interface driver zd1211rw Mar 20 12:00:01 mini01 kernel: [ 6423.587654] udev: renamed network interface wlan0 to wlan3 Mar 20 12:00:01 mini01 kernel: [ 6423.596453] usb 1-7: firmware: requesting zd1211/zd1211b_ub Mar 20 12:00:01 mini01 kernel: [ 6423.639832] usb 1-7: firmware: requesting zd1211/zd1211b_uphr Mar 20 12:00:02 mini01 kernel: [ 6423.866008] zd1211rw 1-7:1.0: firmware version 4725 Mar 20 12:00:02 mini01 kernel: [ 6423.910913] zd1211rw 1-7:1.0: zd1211b chip 0ace:1215 v4810 high 00-1a-ee MAXIM_NEW_RF pa0 -7--- Mar 20 12:00:02 mini01 kernel: [ 6423.913977] cfg80211: Calling CRDA for country: DE $ cat /var/log/kern.log Mar 20 12:13:38 mini01 kernel: [ 160.688095] usb 1-7: new high speed USB device using ehci_hcd and address 8 Mar 20 12:13:39 mini01 kernel: [ 160.821576] usb 1-7: New USB device found, idVendor=0ace, idProduct=1215 Mar 20 12:13:39 mini01 kernel: [ 160.821590] usb 1-7: New USB device strings: Mfr=16, Product=32, SerialNumber=0 Mar 20 12:13:39 mini01 kernel: [ 160.821600] usb 1-7: Product: USB2.0 WLAN Mar 20 12:13:39 mini01 kernel: [ 160.821607] usb 1-7: Manufacturer: ZyDAS Mar 20 12:13:39 mini01 kernel: [ 160.821908] usb 1-7: configuration #1 chosen from 1 choice Mar 20 12:13:39 mini01 kernel: [ 160.936073] usb 1-7: reset high speed USB device using ehci_hcd and address 8 Mar 20 12:13:39 mini01 kernel: [ 161.070804] phy1: Selected rate control algorithm 'minstrel' Mar 20 12:13:39 mini01 kernel: [ 161.072155] zd1211rw 1-7:1.0: phy1 Mar 20 12:13:39 mini01 kernel: [ 161.127201] udev: renamed network interface wlan0 to wlan3 Mar 20 12:13:39 mini01 kernel: [ 161.144202] usb 1-7: firmware: requesting zd1211/zd1211b_ub Mar 20 12:13:39 mini01 kernel: [ 161.182605] usb 1-7: firmware: requesting zd1211/zd1211b_uphr Mar 20 12:13:39 mini01 kernel: [ 161.338334] zd1211rw 1-7:1.0: firmware version 4725 Mar 20 12:13:39 mini01 kernel: [ 161.378365] zd1211rw 1-7:1.0: zd1211b chip 0ace:1215 v4810 high 00-1a-ee MAXIM_NEW_RF pa0 -7--- Mar 20 12:13:39 mini01 kernel: [ 161.381990] cfg80211: Calling CRDA for country: DE Mar 20 12:13:51 mini01 kernel: [ 173.315246] wlan3: authenticate with AP 00:90:4c:91:00:01 Mar 20 12:13:51 mini01 kernel: [ 173.316500] wlan3: authenticated Mar 20 12:13:51 mini01 kernel: [ 173.316511] wlan3: associate with AP 00:90:4c:91:00:01 Mar 20 12:13:51 mini01 kernel: [ 173.318087] wlan3: RX
Bug#500712: problem is not reproducible anymore, fixed?
Hi Christian, Christian Kastner wrote, on 20-03-10 03:44: have you encountered this issue again since your initial report, or is it still unreproducible? I tested the boot process with three different zd1211 devices and the boot process did not slow down as much as it did. See the attached document for more information. I believe the problem has been fixed somewhere. (any idea where?) Thanks in advance, Kind regards, Jelle de Jong $ uname -a Linux mini01 2.6.30-2-686 #1 SMP Fri Dec 4 00:53:20 UTC 2009 i686 GNU/Linux $ cat /proc/cmdline BOOT_IMAGE=/boot/vmlinuz-2.6.30-2-686 root=UUID=7234a43e-c3d9-41e3-8cc6-837d36da273e ro rootfstype=ext4 ipv6.disable=1 quiet # device01 $ tail -n 200 /var/log/kern.log Mar 20 12:19:04 mini01 kernel: [ 486.120097] usb 1-7: new high speed USB device using ehci_hcd and address 9 Mar 20 12:19:04 mini01 kernel: [ 486.253628] usb 1-7: New USB device found, idVendor=0586, idProduct=3410 Mar 20 12:19:04 mini01 kernel: [ 486.253641] usb 1-7: New USB device strings: Mfr=16, Product=32, SerialNumber=0 Mar 20 12:19:04 mini01 kernel: [ 486.253651] usb 1-7: Product: ZyXEL G-202 Mar 20 12:19:04 mini01 kernel: [ 486.253658] usb 1-7: Manufacturer: ZyDAS Mar 20 12:19:04 mini01 kernel: [ 486.253930] usb 1-7: configuration #1 chosen from 1 choice Mar 20 12:19:04 mini01 kernel: [ 486.372086] usb 1-7: reset high speed USB device using ehci_hcd and address 9 Mar 20 12:19:04 mini01 kernel: [ 486.507546] phy2: Selected rate control algorithm 'minstrel' Mar 20 12:19:04 mini01 kernel: [ 486.508798] zd1211rw 1-7:1.0: phy2 Mar 20 12:19:04 mini01 kernel: [ 486.546512] udev: renamed network interface wlan0 to wlan1 Mar 20 12:19:04 mini01 kernel: [ 486.568446] usb 1-7: firmware: requesting zd1211/zd1211b_ub Mar 20 12:19:04 mini01 kernel: [ 486.647126] usb 1-7: firmware: requesting zd1211/zd1211b_uphr Mar 20 12:19:04 mini01 kernel: [ 486.727988] zd1211rw 1-7:1.0: firmware version 4725 Mar 20 12:19:05 mini01 kernel: [ 486.770922] zd1211rw 1-7:1.0: zd1211b chip 0586:3410 v4810 high 00-19-cb AL2230_RF pa0 g--NS Mar 20 12:19:05 mini01 kernel: [ 486.773680] cfg80211: Calling CRDA for country: DE Mar 20 12:19:39 mini01 kernel: [ 521.026059] wlan1: authenticate with AP 00:90:4c:91:00:01 Mar 20 12:19:39 mini01 kernel: [ 521.028410] wlan1: authenticated Mar 20 12:19:39 mini01 kernel: [ 521.028423] wlan1: associate with AP 00:90:4c:91:00:01 Mar 20 12:19:39 mini01 kernel: [ 521.030265] wlan1: RX AssocResp from 00:90:4c:91:00:01 (capab=0x431 status=0 aid=2) Mar 20 12:19:39 mini01 kernel: [ 521.030275] wlan1: associated # device02 $ tail -n 200 /var/log/kern.log Mar 20 12:24:27 mini01 kernel: [ 84.460067] usb 1-7: new high speed USB device using ehci_hcd and address 9 Mar 20 12:24:27 mini01 kernel: [ 84.593534] usb 1-7: New USB device found, idVendor=0ace, idProduct=1215 Mar 20 12:24:27 mini01 kernel: [ 84.593547] usb 1-7: New USB device strings: Mfr=16, Product=32, SerialNumber=0 Mar 20 12:24:27 mini01 kernel: [ 84.593557] usb 1-7: Product: USB2.0 WLAN Mar 20 12:24:27 mini01 kernel: [ 84.593564] usb 1-7: Manufacturer: ZyDAS Mar 20 12:24:27 mini01 kernel: [ 84.593840] usb 1-7: configuration #1 chosen from 1 choice Mar 20 12:24:27 mini01 kernel: [ 84.712083] usb 1-7: reset high speed USB device using ehci_hcd and address 9 Mar 20 12:24:28 mini01 kernel: [ 84.847967] phy1: Selected rate control algorithm 'minstrel' Mar 20 12:24:28 mini01 kernel: [ 84.849392] zd1211rw 1-7:1.0: phy1 Mar 20 12:24:28 mini01 kernel: [ 84.966162] udev: renamed network interface wlan0 to wlan4 Mar 20 12:24:28 mini01 kernel: [ 84.978904] usb 1-7: firmware: requesting zd1211/zd1211b_ub Mar 20 12:24:28 mini01 kernel: [ 85.021982] usb 1-7: firmware: requesting zd1211/zd1211b_uphr Mar 20 12:24:28 mini01 kernel: [ 85.145409] zd1211rw 1-7:1.0: firmware version 4725 Mar 20 12:24:28 mini01 kernel: [ 85.185421] zd1211rw 1-7:1.0: zd1211b chip 0ace:1215 v4810 high 00-19-e0 UW2453_RF pa0 -7--- Mar 20 12:24:28 mini01 kernel: [ 85.188874] cfg80211: Calling CRDA for country: DE Mar 20 12:24:43 mini01 kernel: [ 100.106333] wlan4: authenticate with AP 00:90:4c:91:00:01 Mar 20 12:24:43 mini01 kernel: [ 100.113802] wlan4: authenticated Mar 20 12:24:43 mini01 kernel: [ 100.113812] wlan4: associate with AP 00:90:4c:91:00:01 Mar 20 12:24:43 mini01 kernel: [ 100.115540] wlan4: RX AssocResp from 00:90:4c:91:00:01 (capab=0x431 status=0 aid=3) Mar 20 12:24:43 mini01 kernel: [ 100.115550] wlan4: associated Mar 20 12:24:44 mini01 kernel: [ 101.135304] padlock: VIA PadLock not detected. # device03 Mar 20 12:32:10 mini01 kernel: [ 547.756081] usb 1-7: new high speed USB device using ehci_hcd and address 10 Mar 20 12:32:11 mini01 kernel: [ 547.889582] usb 1-7: New USB device found, idVendor=0ace, idProduct=1215 Mar 20 12:32:11 mini01 kernel: [ 547.889596] usb 1-7: New USB device strings: Mfr=16, Product=32, SerialNumber=0 Mar 20 12:32:11 mini01 kernel: [ 547.889606] usb 1
Bug#575063: please update duplicity to version 0.6.08b or higher to solve several cache bugs
Package: duplicity Version: 0.6.06-3 Severity: normal Please see the email thread in the duplicity-talk mailinglist: http://lists.gnu.org/archive/html/duplicity-talk/2010-03/msg00096.html Information about the caching bug: https://bugs.launchpad.net/duplicity/+bug/497243 Newer releases of duplicity: https://code.launchpad.net/duplicity/0.6-series/ -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (100, 'testing'), (100, 'stable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.30-2-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to nl_NL.UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages duplicity depends on: ii gnupg1.4.10-2GNU privacy guard - a free PGP rep ii libc62.10.2-6Embedded GNU C Library: Shared lib ii librsync10.9.7-7 rsync remote-delta algorithm libra ii python 2.5.4-9 An interactive high-level object-o ii python-central 0.6.14+nmu2 register and build utility for Pyt pi python-pexpect 2.3-1 Python module for automating inter duplicity recommends no packages. Versions of packages duplicity suggests: pn ncftp none (no description available) pn python-boto none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#575109: openoffice.org-writer: unexpected error, oowriter crashed after copy pasting text from a document to an other document
Package: openoffice.org-writer Version: 1:3.2.0-4 Severity: important Tags: sid Since around one month or so my oowriter has become unusable for my production purposes. When I copy text from a table of one of my document and copy it to the table of an other document. OpenOffice.org will crash with an unexpected error. It will happen every time when I am working on a document. However it does not crashes immediately after every copy paste action. It may be related to bug #555054 but I am not sure. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (100, 'testing'), (100, 'stable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.30-2-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to nl_NL.UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages openoffice.org-writer depends on: ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib ii libgcc1 1:4.4.3-3GCC support library ii libicu424.2.1-3 International Components for Unico ii libstdc++6 4.4.3-3 The GNU Standard C++ Library v3 ii libstlport4.6ldbl 4.6.2-7 STLport C++ class library ii libwpd8c2a 0.8.14-1 Library for handling WordPerfect d ii libwps-0.1-10.1.2-1 Works text file format import filt ii openoffice.org-base-cor 1:3.2.0-4full-featured office productivity ii openoffice.org-core 1:3.2.0-4full-featured office productivity ii ure 1.6.0+OOo3.2.0-4 OpenOffice.org UNO runtime environ ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime Versions of packages openoffice.org-writer recommends: ii default-jre [java5-runtime] 1.6-34 Standard Java or Java compatible R ii openjdk-6-jre [java5-runtime 6b18~pre2-1 OpenJDK Java runtime, using Hotspo pn openoffice.org-emailmergenone (no description available) pn openoffice.org-filter-binfil none (no description available) pn openoffice.org-java-common none (no description available) pn openoffice.org-math none (no description available) ii sun-java6-jre [java5-runtime 6.18-3 Sun Java(TM) Runtime Environment ( Versions of packages openoffice.org-writer suggests: pn openoffice.org-base none (no description available) pn openoffice.org-gcjnone (no description available) Versions of packages openoffice.org-core depends on: ii fontconfig 2.8.0-2 generic font configuration library ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib ii libcairo2 1.8.10-3 The Cairo 2D vector graphics libra ii libcurl37.20.0-2 Multi-protocol file transfer libra ii libdb4.84.8.26-1 Berkeley v4.8 Database Libraries [ ii libexpat1 2.0.1-7 XML parsing C library - runtime li ii libfreetype62.3.11-1 FreeType 2 font engine, shared lib ii libgcc1 1:4.4.3-3GCC support library ii libglib2.0-02.22.4-1 The GLib library of C routines ii libgraphite31:2.3.1-0.2 SILGraphite - a smart font rende ii libgstreamer-plugins-ba 0.10.28-1GStreamer libraries from the base ii libgstreamer0.10-0 0.10.28-1Core GStreamer libraries and eleme ii libgtk2.0-0 2.18.9-1 The GTK+ graphical user interface ii libhunspell-1.2-0 1.2.8-6 spell checker and morphological an ii libhyphen0 2.5-1ALTLinux hyphenation library - sha ii libice6 2:1.0.6-1X11 Inter-Client Exchange library ii libicu424.2.1-3 International Components for Unico ii libjpeg62 6b-16.1 The Independent JPEG Group's JPEG ii libneon27-gnutls0.29.3-2 An HTTP and WebDAV client library ii libnspr4-0d 4.8.4-1 NetScape Portable Runtime Library ii libnss3-1d 3.12.6-1 Network Security Service libraries ii libsm6 2:1.1.1-1X11 Session Management library ii libssl0.9.8 0.9.8m-2 SSL shared libraries ii libstdc++6 4.4.3-3 The GNU Standard C++ Library v3 ii libstlport4.6ldbl 4.6.2-7 STLport C++ class library ii libx11-62:1.3.3-2X11 client-side library ii libxaw7 2:1.0.7-1X11 Athena Widget library ii libxext62:1.1.1-3X11 miscellaneous extension librar ii libxinerama12:1.1-3 X11 Xinerama extension library ii libxml2 2.7.6.dfsg-2+b1 GNOME XML library ii libxrandr2 2:1.3.0-3X11 RandR extension library ii
Bug#575109: openoffice.org-writer: unexpected error, oowriter crashed after copy pasting text from a document to an other document (spell fix)
Hi René Rene Engelhard wrote, on 23-03-10 17:33: Only in sid? Packages from Debian stable work fine but from unstable do not work, since rmadison shows that unstable and testing are the same I did not try testing. Today I also tried the packages from download.openoffice.org and they have the same issue. I narrowed the issue down to the attached file. When I triple click the cell A1.2.4 (the one under Contactpersoon) and right click the mouse and left click copy and then move the mouse openoffice will crash. This happens every time even after I restart oowriter or the hole system. The bug may be related to the locale settings of the system. Not that it's related, but this is not sid. If you use Debian-packaged kernels, stay uptodate with *all* packages.. The newest kernel has a bug that breaks my hsdpa module so I have to use an older kernel version... else I can't use the system. Thank you, Best regards, Jelle de Jong oowriter-crash-test.odt Description: application/vnd.oasis.opendocument.text
Bug#575109: openoffice.org-writer: unexpected error, oowriter crashed after copy pasting text from a document to an other document
Hi René Rene Engelhard wrote, on 23-03-10 17:33: Only in sid? Packages from debian stable work fine but from unstable do not work, since rmadison shows that unstable and testing are the same I did not try testing. Today I also tried the packages from download.openoffice.org and they have the same issue. I nowored the issue down to the attached file. When I tripple click the cell A1.2.4 (the one under Contactpersoon) and rigth click the mouse and left click copy and then move the mouse openoffice will crash. This happens everytime even after I restart oowriter or the hole system. The bug may be releated to the locale settings of the system. Not that it's related, but this is not sid. If you use Debian-packaged kernels, stay uptodate with *all* packages.. The newest kernel has a bug that breaks my hsdpa module so I have to use an older kernel version... else I can't use the system. Thank you, Best regards, Jelle de Jong oowriter-crash-test.odt Description: application/vnd.oasis.opendocument.text
Bug#491723: request and intention to package statusnet distributed microblogging tool
Hello everybody, I read in the bugreport thread that Evan as one of the orignal developers intended to start packaging statusnet himself. I have been following the thread now for almost 10 months, and I am interested in how the process is going behind the scenes? Can we expect a Debian release of statusnet 0.8.x around February 2010 with the fosdem Europa in Brussels. I can buy you a few beers then if you would be there. (and findable) Thank in advance, Kind regards, Jelle -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#500330: closed by Josselin Mouette j...@debian.org (Bug#500330: fixed in totem 2.24.3-3)
Debian Bug Tracking System wrote: This is an automatic notification regarding your Bug report which was filed against the totem-xine package: #500330: totem-xine: when totem plays video, the oowriter menu keeps comming down It has been closed by Josselin Mouette j...@debian.org. I can confirm the bug has been fixed. Thank you for the good maintainership. Could you help me with this totem-xine bug: http://bugzilla.gnome.org/show_bug.cgi?id=554319 Best regards, Jelle de Jong -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#523622: to many dependencies on hal package
Package: hal Version: 0.5.12~git20090406.46dc48-1 Severity: normal consolekit hal hal-info libck-connector0 libpolkit-dbus2 libpolkit-grant2 libpolkit2 pm-utils policykit powermgmt-base Those are all dependencies that need to be installed for hal, I have no need for theme and the extra packages make my support systems break and create unwanted extra not needed daemons. I only need hal to make it possible for the user to mount usb disk devices. Would it be possible to make recommended packages or hal-extra or hal-consolekit hal-powermgmt Thanks in advance, Best regards, Jelle de Jong -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (100, 'testing'), (100, 'stable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.29-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages hal depends on: ii acl 2.2.47-2Access control list utilities ii adduser 3.110 add and remove users and groups ii consolekit 0.3.0-2 framework for defining and trackin ii dbus 1.2.12-1simple interprocess messaging syst ii hal-info 20090309-1 Hardware Abstraction Layer - fdi f ii libc62.9-6 GNU C Library: Shared libraries ii libdbus-1-3 1.2.12-1simple interprocess messaging syst ii libdbus-glib 0.80-3 simple interprocess messaging syst ii libexpat12.0.1-4 XML parsing C library - runtime li ii libgcc1 1:4.3.3-7 GCC support library ii libglib2.0-0 2.20.0-3The GLib library of C routines ii libhal-stora 0.5.12~git20090406.46dc48-1 Hardware Abstraction Layer - share ii libhal1 0.5.12~git20090406.46dc48-1 Hardware Abstraction Layer - share ii libpolkit2 0.9-3 library for accessing PolicyKit ii libsmbios2 2.0.3.dfsg-1Provide access to (SM)BIOS informa ii libstdc++6 4.3.3-7 The GNU Standard C++ Library v3 ii libusb-0.1-4 2:0.1.12-13 userspace USB programming library ii libvolume-id 0.140-2 libvolume_id shared library ii lsb-base 3.2-22 Linux Standard Base 3.2 init scrip ii mount2.13.1.1-1 Tools for mounting and manipulatin ii pciutils 1:3.1.2-3 Linux PCI Utilities ii pm-utils 1.2.4-2 utilities and scripts for power ma ii policykit0.9-3 framework for managing administrat ii udev 0.140-2 /dev/ and hotplug management daemo ii usbutils 0.73-10 Linux USB utilities Versions of packages hal recommends: ii eject 2.1.5+deb1+cvs20081104-5 ejects CDs and operates CD-Changer pn libsmbios-bin none (no description available) Versions of packages hal suggests: pn gnome-device-manager none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#595904: grub-pc: bpo request for grub2 with version from debian testing
Package: grub-pc Version: 1.97~beta3-1~bpo50+1 Severity: wishlist I would like to request a new bpo release for the grub2 packages since bpo is now on debian.org i am using the reportbug tool. I need the version from debian tesing when i want support for lvm with mdadm and ext4. The version from debian testing pulls in a lot of extra dependencies from testing, making it inpossible to maintain a clean debian stable system with grub2 from debian testing. The grub2 version in debian testing I too old to have lvm, mdamd and ext4 support. Could somebody helpout and create a new version of the bpo packages for grub2? -- Package-specific info: *** BEGIN /proc/mounts /dev/disk/by-uuid/81d33988-a77c-4596-8ea7-8b417785dabe / ext4 rw,noatime,barrier=1,data=ordered 0 0 *** END /proc/mounts *** BEGIN /boot/grub/device.map (hd0) /dev/sda (hd1) /dev/sdb *** END /boot/grub/device.map *** BEGIN /boot/grub/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### set default=0 serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1 if terminal_input serial ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_input terminal serial fi if terminal_output serial ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal serial fi set timeout=3 ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=cyan/blue set menu_color_highlight=white/blue ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry Debian GNU/Linux, Linux 2.6.32-bpo.5-686 { insmod ext2 set root=(hd0,1) search --no-floppy --fs-uuid --set 81d33988-a77c-4596-8ea7-8b417785dabe linux /boot/vmlinuz-2.6.32-bpo.5-686 root=UUID=81d33988-a77c-4596-8ea7-8b417785dabe ro rootfstype=ext4 elevator=deadline acpi=off ipv6.disable=1 console=ttyS0,115200 quiet initrd /boot/initrd.img-2.6.32-bpo.5-686 } menuentry Debian GNU/Linux, Linux 2.6.32-bpo.5-686 (recovery mode) { insmod ext2 set root=(hd0,1) search --no-floppy --fs-uuid --set 81d33988-a77c-4596-8ea7-8b417785dabe linux /boot/vmlinuz-2.6.32-bpo.5-686 root=UUID=81d33988-a77c-4596-8ea7-8b417785dabe ro single rootfstype=ext4 elevator=deadline acpi=off ipv6.disable=1 console=ttyS0,115200 initrd /boot/initrd.img-2.6.32-bpo.5-686 } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### *** END /boot/grub/grub.cfg -- System Information: Debian Release: 5.0.6 APT prefers stable APT policy: (990, 'stable') Architecture: i386 (i586) Kernel: Linux 2.6.32-bpo.5-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages grub-pc depends on: ii debconf [debconf-2. 1.5.24 Debian configuration management sy ii grub-common 1.97~beta3-1~bpo50+1 GRand Unified Bootloader, version ii libc6 2.7-18lenny4 GNU C Library: Shared libraries ii ucf 3.0016 Update Configuration File: preserv grub-pc recommends no packages. Versions of packages grub-pc suggests: pn desktop-base none (no description available) pn genisoimage none (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#596795: bluez: package upgrade disables bluetooth way to long
Package: bluez Version: 4.70-1 Severity: important Package upgrade of bluetooth disables the bluez daemon, causing keyboard, mouse and audio (all bluetooth) to stop working for as long as the complete upgrade process takes, this can easily take up to 20 minutes. Since the bluetooth devices are the only input devices on a lot of my desktop systems, the devices get useless. When doing an unattended update on the client systems this is a major issues, users believe there system broke and try to turn the system on and off. Bluetooth should not be disabled for longer then a few seconds during a package upgrade. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (100, 'testing'), (100, 'stable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.34-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=nl_NL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages bluez depends on: ii dbus 1.2.24-3 simple interprocess messaging syst ii libbluetooth3 4.70-1 Library to use the BlueZ Linux Blu ii libc6 2.11.2-5 Embedded GNU C Library: Shared lib ii libcap-ng00.6.4-1An alternate posix capabilities li ii libdbus-1-3 1.2.24-3 simple interprocess messaging syst ii libglib2.0-0 2.24.2-1 The GLib library of C routines ii libnl11.1-5 library for dealing with netlink s ii libusb-0.1-4 2:0.1.12-16userspace USB programming library ii lsb-base 3.2-23.1 Linux Standard Base 3.2 init scrip ii module-init-tools 3.12-1 tools for managing Linux kernel mo ii python-dbus 0.83.1-1 simple interprocess messaging syst ii python-gobject2.21.4+is.2.21.3-1 Python bindings for the GObject li ii udev 161-1 /dev/ and hotplug management daemo bluez recommends no packages. bluez suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#517086: [Pkg-xfce-devel] Bug#517086: Bug#517086: xfce4-clipman-plugin: regression, plugin does not work any more
Yves-Alexis Perez wrote: what the status for this on 1.0.0? Can you try and report back. I'm about to upload 1.0.1 so you'll be able to test it soon too. Hi Yves-Alexis, I am currently using xfce4-clipman-plugin version 2:1.0.0-1 and the behavior and looks of this plugin is complete different from version 2:0.9.0-1. In my opinion they are two different software products. When using 1.0.0 and having the add selections option checked. It is added immediately to the list this is kind of nice, however it is impossible to to select text and copy it over an other selection because the new selection will be directly copied to the buffer. I don't know if this is normal behavior and if KDE and GNOME clipboard managers do the same. But this features makes the add selection system not productive for me anymore. So I stopped using it because I could not use it to copy and replace text anymore... The behavior of the 0.9.0 version on this bug report is not reproducible anymore since 1.0.0 is complete different. I would also like the clipman to stay KISS (keep It Simple Stupid) I don't see added value for the complicated Action feature and the Image storage system or the enable/disable feature. Maybe somebody can explain it to me ;-) Some of my customers complained about the changes and I don't have any answers for them ... Thanks in advance, Jelle de Jong -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#529259: texlive-latex-extra: please ship moderncv 2008/06/17 v0.7 modern curriculum vitae document class and update to packages to newer release
Package: texlive-latex-extra Version: 2007.dfsg.17-2 Severity: wishlist I wanted to make a tex document with pdflatex and moderncv, however the provided examples do not work on debian because the packages are outdated. http://tug.ctan.org/tex-archive/macros/latex/contrib/moderncv/examples/ I ask on IRC #latex and they explained this, the example work with the newer version of the packages. The current debian moderncv version is 2006/09/09 v0.5 while there is a 2008 version.. The errors: ! Undefined control sequence. l.13 \moderncvtheme [blue, roman]{classic} % idem ? x I dont know why the packages are outdated but my request is to update the packages to the latest release. Thanks in advance, Jelle de Jong $ sudo apt-get install -t experimental texlive-latex-extra texlive-fonts-extra texlive-fonts-recommended texlive-latex-recommended lmodern Reading package lists... Done Building dependency tree Reading state information... Done texlive-latex-extra is already the newest version. texlive-fonts-extra is already the newest version. texlive-fonts-recommended is already the newest version. texlive-latex-recommended is already the newest version. lmodern is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 51 not upgraded. $ dpkg -l texlive-latex-extra texlive-fonts-extra texlive-fonts-recommended texlive-latex-recommended lmodern Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-==-==- ii lmodern1.010x-5 scalable PostScript and OpenType fonts based on Computer Modern ii texlive-fonts-extra2007.dfsg.17-2 TeX Live: Extra fonts ii texlive-fonts-recommended 2007.dfsg.2-4 TeX Live: Recommended fonts ii texlive-latex-extra2007.dfsg.17-2 TeX Live: LaTeX supplementary packages ii texlive-latex-recommended 2007.dfsg.2-4 TeX Live: LaTeX recommended packages -- Package-specific info: If you report an error when running one of the TeX-related binaries (latex, pdftex, metafont,...), or if the bug is related to bad or wrong output, please include a MINIMAL example input file that produces the error in your report. Don't forget to also include minimal examples of other files that are needed, e.g. bibtex databases. Often it also helps to include the logfile. Please, never send included pictures! If your example file isn't short or produces more than one page of output (except when multiple pages are needed to show the problem), you can probably minimize it further. Instructions on how to do that can be found at http://www.latex-einfuehrung.de/mini-en.html (english) or http://www.latex-einfuehrung.de/mini.html (german) ## minimal input file ## other files ## List of ls-R files -rw-r--r-- 1 root root 842 2009-05-18 10:52 /var/lib/texmf/ls-R -rw-rw-r-- 1 root staff 79 2009-05-18 10:37 /usr/local/share/texmf/ls-R lrwxrwxrwx 1 root root 29 2009-05-18 10:11 /usr/share/texmf/ls-R - /var/lib/texmf/ls-R-TEXMFMAIN lrwxrwxrwx 1 root root 27 2009-05-18 10:11 /usr/share/texmf-texlive/ls-R - /var/lib/texmf/ls-R-TEXLIVE lrwxrwxrwx 1 root root 27 2009-05-18 10:11 /usr/share/texmf-texlive/ls-R - /var/lib/texmf/ls-R-TEXLIVE ## Config files lrwxrwxrwx 1 root root 20 2009-05-18 10:11 /usr/share/texmf/web2c/texmf.cnf - /etc/texmf/texmf.cnf -rw-r--r-- 1 root root 3229 2009-05-18 10:52 /var/lib/texmf/web2c/fmtutil.cnf -rw-r--r-- 1 root root 8606 2009-05-18 10:52 /var/lib/texmf/web2c/updmap.cfg -rw-r--r-- 1 root root 4302 2009-05-18 10:52 /var/lib/texmf/tex/generic/config/language.dat ## Files in /etc/texmf/web2c/ total 4 -rw-r--r-- 1 root root 283 2008-04-16 22:01 mktex.cnf ## md5sums of texmf.d 42c20d7e8bd343542772b5a145bf8ad8 /etc/texmf/texmf.d/05TeXMF.cnf 5f7f6652cc8b8071c9e4ea6ba9e9f0a1 /etc/texmf/texmf.d/15Plain.cnf f68e5add6afd6585b982f2f78e2e6a92 /etc/texmf/texmf.d/45TeXinputs.cnf ea33127256c6a9f37145ae5b16fdb80c /etc/texmf/texmf.d/55Fonts.cnf afccf1d3f87057411166a77c58e00bd1 /etc/texmf/texmf.d/65BibTeX.cnf 9da7c1c7b1eaf06f941af91f48a23068 /etc/texmf/texmf.d/75DviPS.cnf 7ae52efac46feb97010986e57877d12e /etc/texmf/texmf.d/80DVIPDFMx.cnf 37329819f1109e8a457e64b8b58fecdb /etc/texmf/texmf.d
Bug#487842: please don't create ~/Desktop automaticly
I am experiencing the same issue: I can imagine the maintainers are very busy.. But I would suggest changing the default behavior to: not creating the default download directory if it does not exist, and come up with a save file dialog instead. Thanks in advance, Jelle -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#509825: xserver-xorg-video-intel: lockups on eeepc 901 Mobile 945GM, FatalError re-entered, aborting
Package: xserver-xorg-video-intel Version: 2:2.3.2-2+lenny5 Severity: normal I have been experiencing lockups of my xorg for a while now, it takes down my complete X and does not allow a restart of the Xserver untill the system is rebooted. The stability of the Intel driver is very important to me. I have no idea why the driver is crashing but i attached my Xorg log and will add one everytime it crashes again, it seems to be crashing more often when I have high cpu loads, like when moving files from usb ext2 disk to sshfs network mount. -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 2008-11-29 23:04 /etc/X11/X - /usr/bin/Xorg -rwxr-xr-x 1 root root 1718580 2008-11-15 17:57 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw--- 1 jelle jelle 1133 2008-11-29 23:35 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: Section Module Disable glx Disable dri EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option XkbRules xorg Option XkbModel pc105 Option XkbLayout us Option XkbOptionscompose:ralt EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer EndSection Section Device Identifier Configured Video Device EndSection Section Monitor Identifier Configured Monitor EndSection Section Screen Identifier Default Screen Monitor Configured Monitor Device Configured Video Device SubSection Display Virtual 1440 900 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen Default Screen Option BlankTime 0 Option StandbyTime 0 Option SuspendTime 0 Option OffTime 0 EndSection Xorg X server log files on system: -rw--- 1 root root 33134 2008-12-26 20:16 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable'), (100, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-video-intel depends on: ii libc6 2.7-16 GNU C Library: Shared libraries ii libdrm2 2.4.1+git+20081116+930c0e7-1 Userspace interface to kernel rend ii xserver-xor 2:1.4.2-9Xorg X server - core server xserver-xorg-video-intel recommends no packages. xserver-xorg-video-intel suggests no packages. -- no debconf information X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-9) Current Operating System: Linux debian-eeepc 2.6.26-1-686 #1 SMP Mon Dec 15 18:15:07 UTC 2008 i686 Build Date: 15 November 2008 05:39:59PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Fri Dec 26 19:47:06 2008 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Configured Monitor (**) | |--Device Configured Video Device (**) Option BlankTime 0 (**) Option StandbyTime 0 (**) Option SuspendTime 0 (**) Option OffTime 0 (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in /usr/share/fonts/X11/100dpi/. Entry deleted from font path. (Run 'mkfontdir' on /usr/share/fonts/X11/100dpi/). (WW) The directory /usr/share/fonts/X11/75dpi/ does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in /usr/share/fonts/X11/100dpi. Entry deleted from font path. (Run 'mkfontdir' on /usr/share/fonts/X11/100dpi). (WW) The directory /usr/share/fonts/X11/75dpi does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc,
Bug#507363: geda package should not depend on geda-doc please move geda-doc to suggested
Package: geda Version: 1:1.4.0.1 Severity: normal The geda package should not depend on the geda-doc package the geda package should be able to run fine with only the geda package, please move the geda-doc package to suggests or recommnds. Is it also possible to package the latest release :-p or provide an git package, this is because geda is in heavy development and with almost every report of an issue on the mailinglist the developers tell the user to manually build the latest git. Would be nice if a git package is provided during the heavy development cycles of the geda and pcb tools. Thank in advance, Jelle de Jong -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (100, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages geda depends on: ii geda-doc 1:1.4.0-1 Documentation for GPL EDA -- Elect ii geda-gnetlist 1:1.4.0-2 GPL EDA -- Electronics design soft ii geda-gschem 1:1.4.0-2 GPL EDA -- Electronics design soft Versions of packages geda recommends: ii extra-xdg-menus 1.0-4 Extra menu categories for applicat ii geda-gattrib 1:1.4.0-4 GPL EDA -- Electronics design soft ii geda-gsymcheck1:1.4.0-2 GPL EDA -- Electronics design soft Versions of packages geda suggests: ii geda-examples1:1.4.0-1 GPL EDA -- Electronics design soft ii geda-utils 1:1.4.0-2.1 GPL EDA -- Electronics design soft ii gerbv2.0.1-3 Gerber file viewer for PCB design ii pcb 20080202-2 printed circuit board (pcb) design -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#508011: udev and pcscd do not set scard group of device anymore, making device not accesable for user other then root
Package: pcscd Version: 1.4.102-1 Severity: normal ~$ ls -l /dev/bus/usb/002/004 crw-rw-r-- 1 root root 189, 131 2008-12-06 23:09 /dev/bus/usb/002/004 ~$ udevinfo info --attribute-walk --name=/dev/bus/usb/002/004 Udevinfo starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/class/usb_device/usbdev2.4': KERNEL==usbdev2.4 SUBSYSTEM==usb_device DRIVER== looking at parent device '/devices/pci:00/:00:1d.1/usb2/2-2': KERNELS==2-2 SUBSYSTEMS==usb DRIVERS==usb ATTRS{configuration}==CCID Class ATTRS{bNumInterfaces}== 1 ATTRS{bConfigurationValue}==1 ATTRS{bmAttributes}==a0 ATTRS{bMaxPower}==100mA ATTRS{urbnum}==202 ATTRS{idVendor}==04e6 ATTRS{idProduct}==5115 ATTRS{bcdDevice}==0518 ATTRS{bDeviceClass}==00 ATTRS{bDeviceSubClass}==00 ATTRS{bDeviceProtocol}==00 ATTRS{bNumConfigurations}==1 ATTRS{bMaxPacketSize0}==16 ATTRS{speed}==12 ATTRS{busnum}==2 ATTRS{devnum}==4 ATTRS{version}== 2.00 ATTRS{maxchild}==0 ATTRS{quirks}==0x0 ATTRS{authorized}==1 ATTRS{manufacturer}==SCM Microsystems Inc. ATTRS{product}==SCR33x USB Smart Card Reader ATTRS{serial}==21120618201041 looking at parent device '/devices/pci:00/:00:1d.1/usb2': KERNELS==usb2 SUBSYSTEMS==usb DRIVERS==usb ATTRS{configuration}== ATTRS{bNumInterfaces}== 1 ATTRS{bConfigurationValue}==1 ATTRS{bmAttributes}==e0 ATTRS{bMaxPower}== 0mA ATTRS{urbnum}==89 ATTRS{idVendor}==1d6b ATTRS{idProduct}==0001 ATTRS{bcdDevice}==0206 ATTRS{bDeviceClass}==09 ATTRS{bDeviceSubClass}==00 ATTRS{bDeviceProtocol}==00 ATTRS{bNumConfigurations}==1 ATTRS{bMaxPacketSize0}==64 ATTRS{speed}==12 ATTRS{busnum}==2 ATTRS{devnum}==1 ATTRS{version}== 1.10 ATTRS{maxchild}==2 ATTRS{quirks}==0x0 ATTRS{authorized}==1 ATTRS{manufacturer}==Linux 2.6.26-1-686 uhci_hcd ATTRS{product}==UHCI Host Controller ATTRS{serial}==:00:1d.1 ATTRS{authorized_default}==1 looking at parent device '/devices/pci:00/:00:1d.1': KERNELS==:00:1d.1 SUBSYSTEMS==pci DRIVERS==uhci_hcd ATTRS{vendor}==0x8086 ATTRS{device}==0x27c9 ATTRS{subsystem_vendor}==0x1043 ATTRS{subsystem_device}==0x830f ATTRS{class}==0x0c0300 ATTRS{irq}==19 ATTRS{local_cpus}==ff ATTRS{local_cpulist}==0-7 ATTRS{modalias}==pci:v8086d27C9sv1043sd830Fbc0Csc03i00 ATTRS{broken_parity_status}==0 ATTRS{msi_bus}== looking at parent device '/devices/pci:00': KERNELS==pci:00 SUBSYSTEMS== DRIVERS== ~$ gpg --card-status gpg: pcsc_establish_context failed: no service (0x8010001d) gpg: card reader not available gpg: OpenPGP card not available: general error ~$ groups user uesr ... scard ... # as root the device works fine -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable'), (100, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages pcscd depends on: ii hal 0.5.11-6 Hardware Abstraction Layer ii libc6 2.7-16 GNU C Library: Shared libraries ii libccid [pcsc-ifd-handler]1.3.8-1PC/SC driver for USB CCID smart ca ii libdbus-1-3 1.2.1-4simple interprocess messaging syst ii libhal1 0.5.11-6 Hardware Abstraction Layer - share ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip pcscd recommends no packages. pcscd suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#508011: starting the hal daemon makes the device accessible
some update, I remembert some thing I forgot to do: It seems I need HAL to be able to access the device as normal user, I still think this is a bug. Why do I need HAL for this? root can access the device fine without hal, and the device group seems not to be set to scard. Can the system be fixed so smartcard is usable without HAL? /etc/init.d/hal start /etc/init.d/pcscd start Thanks in advance. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#508051: udev: persistent-net-generator breaks working networking configurations, new default behaviour requested, please see the report
Package: udev Version: 0.125-7 Severity: normal user case (1): - one of my customers bought a Linux system that uses the /etc/network/interfaces file with wpa_supplicant and the wlan0 device to enable an configure his secure network now something happens with the network card, being in this case an usb wireless stick. And the user buys a new Linux compatible device from his favorite Linux shop. He plugs in the device reboots his computer and his network does not work! He gets frustrated blames Debian and Linux and the local person of the Linux shop. The Linux shop need to refund the device and possible guarantee clams that tolled him it will work directly. user case (2): - one of my customers is upgrading his system and after upgrading the network does not work anymore... problem (1): - udevs persistent-net-generator names new hardware in an incrementing way, for example I plug in wlandevice(0) and it becomes wlan0 then I remove the stick because it is broken, and add a new one the generator will name it as wlan1 and the network will not work because it is configured for wlan0. solution (1): - change the behavior of the persistent-net-generator. Only increment a device name when there is a device attached with the used name for example, I plug in wlandevice0 it will become wlan0 if I add an other wlandevice1 it will become wlan1, but if I removed wlandevice0 and then add wlandevice1 it should become wlan0 so the network settings do not break! Of course there are situations where wlan1, wlan2, wlan3 are wanted but this is more likely to be an advance user that and can setup his network on his own. But for non computer literate person the network should just keep working when configured. problem (2): - somehow a new version of udev and kernel detects the device differently and renames the devices as a new wlan1 device, breaking the previous working network configuration. solution (2): - make sure configuration file are backwards compatible and wont break excising network configuration. Also see solution (1). I have had several cases where the network configuration becomes broken after upgrading or plugging in new devices. The frustration for my customers are high, because they don't understand why it is so fragile and unreliable in there eyes. It gets me personally a bad name and I lose money because of this issues on guarantee claims. I am willing to help with a developer to provide a possible solution. I would very much like this issue to be discussed. Thanks in advance, Jelle de Jong -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable'), (100, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages udev depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii libc6 2.7-16 GNU C Library: Shared libraries ii libselinux1 2.0.65-5 SELinux shared libraries ii libvolume-id0 0.125-7libvolume_id shared library ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip udev recommends no packages. udev suggests no packages. -- debconf information excluded -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#508051: thank you for reponding
Thank you Marco for responding to the report, It is kind of hard to just say I am wrong, I now there must be some amount of truth in it. Where can I find the exciting discussion? Would you be willing to post some links... I saw the original report was not very readable because of the no newlines after 72 characters so below there is a more readable report: user case (1): - one of my customers bought a Linux system that uses the /etc/network/interfaces file with wpa_supplicant and the wlan0 device to enable an configure his secure network now something happens with the network card, being in this case an usb wireless stick. And the user buys a new Linux compatible device from his favorite Linux shop. He plugs in the device reboots his computer and his network does not work! He gets frustrated blames Debian and Linux and the local person of the Linux shop. The Linux shop need to refund the device and possible guarantee clams that tolled him it will work directly. user case (2): - one of my customers is upgrading his system and after upgrading the network does not work anymore... problem (1): - udevs persistent-net-generator names new hardware in an incrementing way, for example I plug in wlandevice(0) and it becomes wlan0 then I remove the stick because it is broken, and add a new one the generator will name it as wlan1 and the network will not work because it is configured for wlan0. solution (1): - change the behavior of the persistent-net-generator. Only increment a device name when there is a device attached with the used name for example, I plug in wlandevice0 it will become wlan0 if I add an other wlandevice1 it will become wlan1, but if I removed wlandevice0 and then add wlandevice1 it should become wlan0 so the network settings do not break! Of course there are situations where wlan1, wlan2, wlan3 are wanted but this is more likely to be an advance user that and can setup his network on his own. But for non computer literate person the network should just keep working when configured. problem (2): - somehow a new version of udev and kernel detects the device differently and renames the devices as a new wlan1 device, breaking the previous working network configuration. solution (2): - make sure configuration file are backwards compatible and wont break excising network configuration. Also see solution (1). I have had several cases where the network configuration becomes broken after upgrading or plugging in new devices. The frustration for my customers are high, because they don't understand why it is so fragile and unreliable in there eyes. It gets me personally a bad name and I lose money because of this issues on guarantee claims. I am willing to help with a developer to provide a possible solution. I would very much like this issue to be discussed. Thanks in advance, Jelle de Jong -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#508011: starting the hal daemon makes the device accessible
Ludovic Rousseau wrote: Jelle de Jong a écrit : some update, I remember some thing I forgot to do: It seems I need HAL to be able to access the device as normal user, I still think this is a bug. Why do I need HAL for this? root can access the device fine without hal, and the device group seems not to be set to scard. Can the system be fixed so smartcard is usable without HAL? pcscd uses HAL to detect reader insertion and removal (USB plug and play) /etc/init.d/hal start /etc/init.d/pcscd start I confirm that if hal or pcscd are not running you may have problems using GPG as a normal user. Maybe you should report the bug to gnupg. Bye So is it not a pcscd related issue, that the smartcard is perfectly accessible as root, but not as normal user when hal is not running? I am also kind of curious why the usb device permissions are not set with the group scard. I will try to figure out some more info how gpg uses the smartcard... Best regards, Jelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#508356: ITP: murrina-theme-stormcloud -- stormcloud theme for the murrine gtk2.x engine
Package: wnpp Severity: wishlist Owner: Jelle de Jong [EMAIL PROTECTED] * Package name: murrina-theme-stormcloud Version : 0.3.0 Upstream Author : Sven Hein * URL : http://xfce-look.org/content/show.php/MurrinaStormCloud?content=61418 * License : GPL Programming Lang: XML Description : stormcloud theme for the murrine gtk2.x engine Modification of MurrinaBlueGreyGlass to match the dark tint of the StormCloud* Metacity themes. Replaces MurrinaBlueGreyGlass. Needs Murrine Engine by Cimi. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#508368: openoffice.org: .desktop icons for openoffice application should be updated with the better tango style based icons
Package: openoffice.org Version: 1:3.0.0-5 Severity: wishlist Hello, I have seen the new icons for the .desktop files on Ubuntu 8.10 and I have not seen similair icons in debian for openoffice. Hereby my request to please update the icons to look nice, and fit in with the tango style. If there is some sort of hidden problem not to update the icons please explain. Thanks in advance, Jelle -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable'), (100, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages openoffice.org depends on: ii liblucene2-java 2.4.0+ds1-2 Full-text search engine library fo ii openoffice.org-base 1:3.0.0-5 OpenOffice.org office suite - data ii openoffice.org-calc 1:3.0.0-5 OpenOffice.org office suite - spre ii openoffice.org-core 1:3.0.0-5 OpenOffice.org office suite archit ii openoffice.org-draw 1:3.0.0-5 OpenOffice.org office suite - draw ii openoffice.org-filter-mobile 1:3.0.0-6 Mobile Devices Filters for OpenOff ii openoffice.org-impress 1:3.0.0-5 OpenOffice.org office suite - pres ii openoffice.org-java-common 1:3.0.0-6 OpenOffice.org office suite Java s ii openoffice.org-math 1:3.0.0-5 OpenOffice.org office suite - equa ii openoffice.org-officebean1:3.0.0-5 OpenOffice.org Office Bean ii openoffice.org-report-builde 1:3.0.0-5 OpenOffice.org Report Builder exte ii openoffice.org-writer1:3.0.0-5 OpenOffice.org office suite - word ii openoffice.org-writer2latex 0.5.0.2-1 Writer/Calc to LaTeX converter ext ii ttf-dejavu 2.27-1 Metapackage to pull in ttf-dejavu- ii ttf-liberation 2-1 The Red Hat Liberation family of f Versions of packages openoffice.org recommends: ii openoffice.org-filter-binfilt 1:3.0.0-5 Legacy filters (e.g. StarOffice 5. Versions of packages openoffice.org suggests: pn cups-bsd none(no description available) ii gstreamer0.10-ffmpeg 0.10.4-3 FFmpeg plugin for GStreamer ii gstreamer0.10-plugins- 0.10.7-2 GStreamer plugins from the bad s ii gstreamer0.10-plugins- 0.10.20-1 GStreamer plugins from the base ii gstreamer0.10-plugins- 0.10.8-4 GStreamer plugins from the good ii gstreamer0.10-plugins- 0.10.8-1 GStreamer plugins from the ugly pn hunspell-dictionarynone(no description available) ii icedove2.0.0.17-1free/unbranded thunderbird mail/ne ii iceweasel 3.0.4-1 lightweight web browser based on M ii imagemagick7:6.4.5.4.dfsg1-1 image manipulation programs ii java-gcj-compat1.0.78-2 Java runtime environment using GIJ ii libgl1-mesa-glx [libgl 7.2-1 A free implementation of the OpenG ii libpaper-utils 1.1.23+nmu1 library for handling paper charact ii libsane1.0.19-22 API library for scanners ii libxrender11:0.9.4-2 X Rendering Extension client libra ii menu 2.1.41generates programs menu for all me ii myspell-en-us [myspell 1:3.0.0-3 English_american dictionary for my ii myspell-nl [myspell-di 1:1.00-2 Dutch dictionary for myspell pn openclipart-openoffice none(no description available) pn openoffice.org-gnome | none(no description available) pn openoffice.org-help-3. none(no description available) pn openoffice.org-hyphena none(no description available) pn openoffice.org-l10n-3. none(no description available) pn openoffice.org2-thesau none(no description available) pn pstoedit none(no description available) pn unixodbc none(no description available) Versions of packages openoffice.org-core depends on: ii fontconfig 2.6.0-3 generic font configuration library ii libc6 2.7-16GNU C Library: Shared libraries ii libcairo2 1.6.4-7 The Cairo 2D vector graphics libra ii libcurl3 7.18.2-7 Multi-protocol file transfer libra ii libdb4.6 4.6.21-12 Berkeley v4.6 Database Libraries [ ii libexpat1 2.0.1-4 XML parsing C library - runtime li ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libgcc11:4.3.2-2~exp4GCC support library ii libglib2.0-0 2.16.6-1 The GLib library of C routines ii libgstreamer-plugins-b 0.10.20-1 GStreamer libraries from the base ii libgstreamer0.10-0 0.10.20-1 Core GStreamer libraries and eleme ii libgtk2.0-02.12.11-4
Bug#508368: openoffice.org: .desktop icons for openoffice application should be updated with the better tango style based icons
Rene Engelhard wrote: tag 508368 - moreinfo retitle 508368 replace .desktop file icons with the Human icons tag 508368 + wontfix thanks Chris Cheney wrote: Ubuntu uses a theme called Human by default at least in their Gnome version. The icons you see under Ubuntu that look different than Debian icons are these Human icon theme icons. If you switch to a different Which are in an other package (human-icon-theme) than openoffice.org-* as calc points out on IRC[1]. debian/* just installs and makes the .desktop file use the same icons as we do - which in turn are far better than was upstream ships So this is + wontfix. (And not a OOo bug anyway) Ren� [1] See http://packages.ubuntu.com/intrepid/all/human-icon-theme/filelist [...] /usr/share/icons/Human/22x22/apps/ooo-base.png /usr/share/icons/Human/22x22/apps/ooo-calc.png /usr/share/icons/Human/22x22/apps/ooo-draw.png /usr/share/icons/Human/22x22/apps/ooo-impress.png /usr/share/icons/Human/22x22/apps/ooo-template.png /usr/share/icons/Human/22x22/apps/ooo-writer.png [...] Agreed on the +wontfix, But the issue that the default icons are ugly still remains What should be the proper way to solve this? Should I create an Debian package (openoffice.org-human-style-icons) for the icons and place them in /usr/share/icons/ Or file an bug-report against gnome-icon-theme and add the icons in /usr/share/icons/gnome/scalable/apps/ Any other ideas? /usr/share/icons/Human/scalable/apps/ooo-base.svg /usr/share/icons/Human/scalable/apps/ooo-calc.svg /usr/share/icons/Human/scalable/apps/ooo-calc2.svg /usr/share/icons/Human/scalable/apps/ooo-draw.svg /usr/share/icons/Human/scalable/apps/ooo-impress.svg /usr/share/icons/Human/scalable/apps/ooo-template.svg /usr/share/icons/Human/scalable/apps/ooo-web.svg /usr/share/icons/Human/scalable/apps/ooo-writer.svg Best regards, Jelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#509825: adding extra report of xorg crash
adding extra report of crashed xorg X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-9) Current Operating System: Linux debian-eeepc 2.6.26-1-686 #1 SMP Mon Dec 15 18:15:07 UTC 2008 i686 Build Date: 15 November 2008 05:39:59PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Tue Jan 13 10:03:20 2009 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Configured Monitor (**) | |--Device Configured Video Device (**) Option BlankTime 0 (**) Option StandbyTime 0 (**) Option SuspendTime 0 (**) Option OffTime 0 (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in /usr/share/fonts/X11/100dpi/. Entry deleted from font path. (Run 'mkfontdir' on /usr/share/fonts/X11/100dpi/). (WW) The directory /usr/share/fonts/X11/75dpi/ does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in /usr/share/fonts/X11/100dpi. Entry deleted from font path. (Run 'mkfontdir' on /usr/share/fonts/X11/100dpi). (WW) The directory /usr/share/fonts/X11/75dpi does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to /etc/X11/rgb (==) ModulePath set to /usr/lib/xorg/modules (==) |--Input Device Configured Mouse (==) |--Input Device Generic Keyboard (==) The core pointer device wasn't specified explicitly in the layout. Using the first core pointer device. (==) The core keyboard device wasn't specified explicitly in the layout. Using the first keyboard device. (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x81e38a0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: pcidata (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (--) using VT number 3 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,27ac card 1043,830f rev 03 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,27ae card 1043,830f rev 03 class 03,00,00 hdr 80 (II) PCI: 00:02:1: chip 8086,27a6 card 1043,830f rev 03 class 03,80,00 hdr 80 (II) PCI: 00:1b:0: chip 8086,27d8 card 1043,831a rev 02 class 04,03,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,27d0 card , rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:1: chip 8086,27d2 card , rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:2: chip 8086,27d4 card , rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:3: chip 8086,27d6 card , rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1d:0: chip 8086,27c8 card 1043,830f rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,27c9 card 1043,830f rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,27ca card 1043,830f rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,27cb card 1043,830f rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,27cc card 1043,830f rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card , rev e2 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,27b9 card 1043,830f rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:2: chip 8086,27c4 card 1043,830f rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:3: chip 8086,27da card 1043,830f rev 02 class 0c,05,00 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:28:0), (0,5,5), BCTRL: 0x0002 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 4: bridge is at (0:28:1), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:28:2), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:28:3), (0,1,2), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 1 non-prefetchable memory
Bug#462516: adding extra issues
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I added an openldap addressbook to icedove (thunderbird) the binding has full write access. I was very disappointed to see that I could not use the ldap addressbook as a normal addressbook and create new contacts, move them, use them, list them etcetera. I would like to see the following features: - - use a RFC-compliant schema for contacts - - follow permissions of the ldap server - - allow full copying from and to local contacts and other ldap servers - - add some option to disable and remove all local contacts - - make it possible to list all contacts in the ldap addressbook - - use the ldap addressbook system to complete email fields In other words I would like these features to make it more enterprise ready. I am willing to donate money for this, how much would be needed to get all the features that I listed? icedove --version Mozilla-Thunderbird 2.0.0.19, Copyright (c) 1998-2008 mozilla.org dpkg -l icedove icedove 2.0.0.19-1 free/unbranded thunderbird mail/news/rss clone Best regards, Jelle de Jong -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iJwEAQECAAYFAkluCOgACgkQ1WclBW9j5HnobwQAlfrrUSGwrK1/fvwg8NqhGvWw z+wKVCmn2GP77Zo3tvkT9ZI5laIhQikNVHzz+g4cmLMEZc3dLEHJQiJCGD501z2/ gIUJUGCa7oUVrezi2CABNbGhnhqo/Rsdprqq1RWPh7KJs16Pf8YMi6IJHYIiKvrQ BPfGs4YLF/nnWoAITi4= =ppfo -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#511809: icedove: no RFC for email filters and MUAs, no way to sync mail filters with an open standard witth other clients
Package: icedove Version: 2.0.0.19-1 Severity: wishlist There is no RFC document for mail filters used in MUAs. There is currently no way to sync mail filters through an open standard with other mail clients and mobile devices. I would like to be able to have groups and user specified mail filter rules in a some sort of local or remote database that can be acceded trough an open standard, making it possible to synchronization, read, and write mail filter rules. I am willing to donate money for this, how much would it cost to develop this for icedove, thunderbird and gnome evolutions as prove of concept for this possible new standard? PS. I am not talking about server based filtering like sieve filters[1]. But if sieve filters can be used or enhanced then this can be an option to. [1] http://www.ietf.org/rfc/rfc3028.txt?number=3028 As a note to this problem, I currently have program lock-in with Thunderbird. I can not move to other mail clients without investigating large amounts of time to get my mail filters fully working, I tried to move to claws-mail and worked with the developer of the mail filter conversion scripts, but after months of emailing it was still not possible to convert my Thunderbird mail filters to claws-mail and have everything filtered the way it did with Thunderbird. Sad story, indicating only a small portion for the need to have a standard for mail filters and synchronization with other clients. -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (990, 'unstable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages icedove depends on: ii debianutils2.30 Miscellaneous utilities specific t ii fontconfig 2.6.0-3 generic font configuration library ii libatk1.0-01.24.0-1 The ATK accessibility toolkit ii libc6 2.7-18GNU C Library: Shared libraries ii libcairo2 1.6.4-7 The Cairo 2D vector graphics libra ii libfontconfig1 2.6.0-3 generic font configuration library ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libgcc11:4.3.2-2~exp5GCC support library ii libglib2.0-0 2.16.6-1 The GLib library of C routines ii libgtk2.0-02.12.11-4 The GTK+ graphical user interface ii libhunspell-1.2-0 1.2.8-1 spell checker and morphological an ii libjpeg62 6b-14 The Independent JPEG Group's JPEG ii libnspr4-0d4.7.1-4 NetScape Portable Runtime Library ii libnss3-1d 3.12.0-5 Network Security Service libraries ii libpango1.0-0 1.20.5-3 Layout and rendering of internatio ii libpng12-0 1.2.33-1 PNG library - runtime ii libstdc++6 4.3.2-2~exp5 The GNU Standard C++ Library v3 ii libx11-6 2:1.1.5-2 X11 client-side library ii libxft22.1.13-2 FreeType-based font drawing librar ii libxinerama1 2:1.0.3-2 X11 Xinerama extension library ii libxrender11:0.9.4-2 X Rendering Extension client libra ii libxt6 1:1.0.5-3 X11 toolkit intrinsics library ii psmisc 22.6-1Utilities that use the proc filesy ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime icedove recommends no packages. Versions of packages icedove suggests: pn icedove-gnome-support none (no description available) pn latex-xft-fonts none (no description available) ii libthai0 0.1.9-4Thai language support library -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#463561: adding additional issues with iceowl/sunbird calendar
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello everybody, I administrate several darwin ical calendar servers running on debian gnu/linux servers and i try to use the ical servers with iceowl and evolution clients, but I am having all kind of problems. This is making it very hard for me to use them in an enterprise environment. I have created several bug reports in the past about my ical issues but i would like to list them here to. I would like to see the following features added or fixed: - - allowing multiple calendars servers with different users and urls don't ask passwords for disabled calenders, and give a clear message about the user and url that is asking for a password. - - make sure events, tasks, notes also are usable in other applications, currently events added with iceowl, do not show up in gnome evolution, making it impossible to share a calendar with an evolution user. Events added with evolution do show up in iceowl. - - make it possible to use user, group, location, and resources based ical setups. - - I have to press the reload button to see events when iceowl is started - - don't lockup when moving event, or tasks - - make sure alarms go off on the right times - - free and busy indication support I am willing to donate money, how much money is needed to fix/add all the above points? iceowl --version Mozilla Iceowl 0.8, Copyright (c) 2004-2008 mozilla.org dpkg -l iceowl iceowl 0.8-6 Standalone Calendar Application Thanks in advance, Best regards, Jelle de Jong -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iJwEAQECAAYFAkluV/4ACgkQ1WclBW9j5HlblwQAhlmZLqYwrtsNPxTZCKVy5ZNW VDgsr0mHpGT0x2V96G+bgCffgrvbYB9KEckXxlMzByoSrHCcM3M5PojVpzW/YbnS nXsAgVm+Qt3zCPmsrAcld4UVsu2VYlc66I5XcsgOHiQjM9o5m/cnpnS4QLhd8Pj3 3eC+qlWWyC6SA/A/7Wk= =7Ad9 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#503391: extra info for geany bug report
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I just saw my bug report again, I would like to say I still have the issue. After reading your test case, it is different from mine. In my situation, the home directory where qeany stores its settings is completely full, when closing geany with a file I worked on, while the disk became full will make geany loose all its preference settings. I know users should not run out of diskspace on there home folder in the first place, but sometimes it happens even while giving them warnings that there diskspace is running lower then 100MB. Thanks in advance, and I love geany, it is one of my most use production tools! Best regards, Jelle de Jong geany --version geany 0.15 (built on Oct 26 2008 with GTK 2.12.11, GLib 2.16.6) dpkg -l geany geany 0.15-1 A fast and lightweight IDE -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAkluYxkACgkQ1WclBW9j5HknMwP/S+BAnni82Xamm/F1e77FAq1D OkMkcB5ds5cCUhrIDjddvMGH1SGdCSl2a1DkWMWhybkaUGImX1Dxc2Efs/HBZIXk nDTGBT2USF9Ea+QrZNTZZ9Bg/5hGPq8y2K2hjuoCGQ0wGB3MtTgKyLVme2vBo23d PHy4l7Sw7U30gddXsPs= =EWli -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#463561: adding additional issues with iceowl/sunbird calendar
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Sack wrote: On Wed, Jan 14, 2009 at 10:24:16PM +0100, Jelle de Jong wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello everybody, I administrate several darwin ical calendar servers running on debian gnu/linux servers and i try to use the ical servers with iceowl and evolution clients, but I am having all kind of problems. This is making it very hard for me to use them in an enterprise environment. I have created several bug reports in the past about my ical issues but i would like to list them here to. I would like to see the following features added or fixed: - - allowing multiple calendars servers with different users and urls don't ask passwords for disabled calenders, and give a clear message multiple calendars are not working? about the user and url that is asking for a password. - - make sure events, tasks, notes also are usable in other applications, currently events added with iceowl, do not show up in gnome evolution, making it impossible to share a calendar with an evolution user. Events added with evolution do show up in iceowl. this would be a wishlist bug to support for evolution data server backend ... upstream is aware of that, but doesnt seem to have to resources to do that (most likely because its not really cross-platform) - - make it possible to use user, group, location, and resources based ical setups. - - I have to press the reload button to see events when iceowl is started - - don't lockup when moving event, or tasks - - make sure alarms go off on the right times - - free and busy indication support Those are glitches and a bunch of improvements exist. Can you try latest iceowl 0.9 from experimental and see if there are improvements that help you to use calendaring more efficiently? - Alexander Thank you Alexander for responding, I don't have version 0.9 in my experimental repository are you sure its there? sudo apt-get update sudo apt-get install -t experimental iceowl rmadison iceowl iceowl | 0.8-6 | testing |source, alpha, amd64, hppa, i386, ia64, mips, mipsel, powerpc, s390, sparc iceowl | 0.8-6 | unstable |source, alpha, amd64, hppa, i386, ia64, mips, mipsel, powerpc, s390, sparc With 0.8-6 multiple calendars are indeed not working, I have a good testing setup, with user calendars, group shared calendars, resource and location calendars. They have all different passwords, iceowl is very confused ask passwords all the time, and does not show for what url and user it is asking the password, it also ask passwords for disabled calendars. Is it possible to demonstrate my issues to somebody at fosdem 2009? Thanks in advance, Jelle de Jong -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAklvBk0ACgkQ1WclBW9j5HnG+QP+Mi1rxFnGYOWus5h/3a4r8uJA hqSUJmxh8FicuY5dMhIH8JWXrTMSoU83vuth1syWBMpoJr0DyOP3SRTCLVo+RK3o ISuGsw6hnrwIyrGH9jpWokyonFgVARm/Tp/Dqs8Sjy6yiBIVg+GXWC4cdJIKutCB 0DdeXhhx4vwUsBw9wX0= =5jzC -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#511885: totem-xine does not play dvd menus anymore, it freezes with a pupup window, incl backtrace
Package: totem-xine Version: 2.24.3-1 Severity: important playback of dvd's does not work anymore on my system, when trying to play the dvd totem-xine freezes, tries do display a popup window but seems to fail, there is no text in the totem-xine windos to see. (grayed out) Thanks in advance, Jelle de Jong sudo apt-get update sudo apt-get install -t experimental totem-xine sudo apt-get install -t experimental gdb totem-dbg libxine1-dbg ffmpeg-dbg # note the totem-xine package should not depend or recommend any -dev packages $ sudo apt-get install -t experimental totem-xine Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: gtk2-engines-pixbuf iso-codes libglib2.0-0 libglib2.0-dev libgtk2.0-0 libgtk2.0-dev libmodplug0c2 libxcb-shape0 libxcb-shm0 libxcb-xv0 libxine1 libxine1-console libxine1-misc-plugins libxine1-plugins libxine1-x totem-common Suggested packages: isoquery libglib2.0-doc libgtk2.0-doc gxine xine-ui libxine1-doc libxine-doc libxine1-gnome Recommended packages: totem-mozilla totem-plugins The following NEW packages will be installed iso-codes libmodplug0c2 libxcb-shape0 libxcb-shm0 libxcb-xv0 libxine1 libxine1-console libxine1-misc-plugins libxine1-plugins libxine1-x totem-common totem-xine The following packages will be upgraded: gtk2-engines-pixbuf libglib2.0-0 libglib2.0-dev libgtk2.0-0 libgtk2.0-dev 5 upgraded, 12 newly installed, 0 to remove and 161 not upgraded. gdb totem-xine GNU gdb (GDB) 6.8.50.20081120-cvs-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as i486-linux-gnu. For bug reporting instructions, please see: http://www.gnu.org/software/gdb/bugs/... (gdb) set pagination 0 (gdb) thread apply all bt full (gdb) run /mnt/powercraft-server-jelle/root/home/jelle/download/usenet/series/LOST/LOST_S3/LOST_S3D1_MOUNT/ Starting program: /usr/bin/totem-xine /mnt/powercraft-server-jelle/root/home/jelle/download/usenet/series/LOST/LOST_S3/LOST_S3D1_MOUNT/ [Thread debugging using libthread_db enabled] [New Thread 0xb59f9b90 (LWP 3294)] [New Thread 0xb48cdb90 (LWP 3295)] [New Thread 0xb406eb90 (LWP 3296)] [New Thread 0xb366cb90 (LWP 3297)] [New Thread 0xb2e6bb90 (LWP 3298)] [Thread 0xb366cb90 (LWP 3297) exited] E: socket-client.c: socket(): Address family not supported by protocol [Thread 0xb2e6bb90 (LWP 3298) exited] [Thread 0xb406eb90 (LWP 3296) exited] [New Thread 0xb406eb90 (LWP 3301)] [New Thread 0xb2e6bb90 (LWP 3302)] [New Thread 0xb366cb90 (LWP 3303)] [New Thread 0xb20a1b90 (LWP 3304)] demux_wavpack: (open_wv_file:127) open_wv_file: non-seekable inputs aren't supported yet. bt full e^C Program received signal SIGINT, Interrupt. 0xb7fe3424 in __kernel_vsyscall () (gdb) backtrace full #0 0xb7fe3424 in __kernel_vsyscall () No symbol table info available. #1 0xb7a15c99 in __lll_lock_wait () from /lib/i686/cmov/libpthread.so.0 No symbol table info available. #2 0xb7a13735 in pthread_cond_broadcast@@GLIBC_2.3.2 () from /lib/i686/cmov/libpthread.so.0 No symbol table info available. #3 0xb7e58c0d in ?? () from /usr/lib/libX11.so.6 No symbol table info available. #4 0x080af960 in ?? () No symbol table info available. #5 0xb7f1ad04 in ?? () from /usr/lib/libX11.so.6 No symbol table info available. #6 0xbfffd328 in ?? () No symbol table info available. #7 0xb7e72ca5 in ?? () from /usr/lib/libX11.so.6 No symbol table info available. #8 0x080af960 in ?? () No symbol table info available. #9 0x in ?? () No symbol table info available. (gdb) info registers eax0xfe00 -512 ecx0x80 128 edx0x2 2 ebx0x80af960134936928 esp0xbfffd2cc 0xbfffd2cc ebp0xbfffd308 0xbfffd308 esi0x0 0 edi0x816a460135701600 eip0xb7fe3424 0xb7fe3424 __kernel_vsyscall+16 eflags 0x200286 [ PF SF IF ID ] cs 0x73 115 ss 0x7b 123 ds 0x7b 123 es 0x7b 123 fs 0x0 0 gs 0x33 51 (gdb) thread apply all backtrace Thread 10 (Thread 0xb20a1b90 (LWP 3304)): #0 0xb7fe3424 in __kernel_vsyscall () #1 0xb7a13025 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/i686/cmov/libpthread.so.0 #2 0xb7fa667e in listener_loop (queue_gen=0x895dab0) at events.c:56 #3 0xb7a0f4c0 in start_thread () from /lib/i686/cmov/libpthread.so.0 #4 0xb71ef6de in clone () from /lib
Bug#511670: totem-xine segfault when playing dvd with menu and using alsa bluetooth
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Josselin Mouette wrote: Hi, Le mardi 13 janvier 2009 � 11:25 +0100, Jelle de Jong a �crit : Package: totem-xine Version: 2.22.2-5 Severity: normal totem-xine[6333]: segfault at 8bdf000 ip b721dcac sp b424df3c error 4 in libc-2.7.so[b71a6000+155000] totem-xine segfaults about everytime I try using dvd's with menus together with my also configured bluetooth headset/speakers. It sometimes works but most time it just segfaults driving me nuts. Could you please install totem-dbg, libxine1-dbg and ffmpeg-dbg, then obtain a full backtrace with gdb? See http://wiki.debian.org/HowToGetABacktrace for more information. Thanks, Hi Josselin, I tried my very best to provide useful backtrace information. The segfaults only happens when using my bluetooth speakers or headsets. Please see the information below for the backtrace and some additional information. I also tried the experimental package of totem-xine and the gdb symbols but that version of totem-xine did not want to play the dvd at all, I made a separate bug report for it: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=511885 I put a lot of time in these reports please help, Thanks in advance, Jelle de Jong - sudo apt-get update sudo apt-get remove --purge -t experimental totem-xine sudo apt-get remove --purge -t experimental gdb totem-dbg libxine1-dbg ffmpeg-dbg sudo aptitude update sudo aptitude install -t unstable totem-xine gdb totem-dbg libxine1-dbg ffmpeg-dbg - totem-xine /mnt/powercraft-server-jelle/root/home/jelle/download/usenet/series/LOST/LOST_S3/LOST_S3D1_MOUNT/ gdb totem-xine (gdb) set pagination 0 (gdb) thread apply all bt full (gdb) run /mnt/powercraft-server-jelle/root/home/jelle/download/usenet/series/LOST/LOST_S3/LOST_S3D1_MOUNT/ (gdb) backtrace full (gdb) info registers (gdb) thread apply all backtrace (gdb) quit - http://debian.pastebin.com/d5090b1ab $ gdb totem-xine GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as i486-linux-gnu... (gdb) set pagination 0 (gdb) thread apply all bt full No registers. (gdb) run /mnt/powercraft-server-jelle/root/home/jelle/download/usenet/series/LOST/LOST_S3/LOST_S3D1_MOUNT/ Starting program: /usr/bin/totem-xine /mnt/powercraft-server-jelle/root/home/jelle/download/usenet/series/LOST/LOST_S3/LOST_S3D1_MOUNT/ [Thread debugging using libthread_db enabled] [New Thread 0xb67d09d0 (LWP 4205)] [New Thread 0xb59a9b90 (LWP 4209)] [New Thread 0xb487db90 (LWP 4210)] [New Thread 0xb401eb90 (LWP 4211)] [New Thread 0xb361cb90 (LWP 4212)] [New Thread 0xb2e1bb90 (LWP 4213)] [Thread 0xb361cb90 (LWP 4212) exited] E: socket-client.c: socket(): Address family not supported by protocol [Thread 0xb2e1bb90 (LWP 4213) exited] [Thread 0xb401eb90 (LWP 4211) exited] [New Thread 0xb401eb90 (LWP 4217)] [New Thread 0xb2e1bb90 (LWP 4218)] [New Thread 0xb361cb90 (LWP 4219)] [New Thread 0xb2051b90 (LWP 4220)] libdvdnav: Using dvdnav version 1.1.16.1 from http://xine.sf.net libdvdread: Using libdvdcss version 1.2.9 for DVD access libdvdread: Attempting to use device /dev/loop0 mounted on /mnt/powercraft-server-jelle/root/home/jelle/download/usenet/series/LOST/LOST_S3/LOST_S3D1_MOUNT for CSS authentication libdvdnav: Can't read name block. Probably not a DVD-ROM device. libdvdnav: Unable to find map file '/home/jelle/.dvdnav/.map' libdvdnav: DVD disk reports itself with Region mask 0x. Regions: 1 2 3 4 5 6 7 8 libdvdread: Attempting to retrieve all CSS keys libdvdread: This can take a _long_ time, please be patient libdvdread: Get key for /VIDEO_TS/VIDEO_TS.VOB at 0x0159 libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_01_0.VOB at 0x28c4 libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_01_1.VOB at 0x000309f0 libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_02_0.VOB at 0x000b1bb6 libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_02_1.VOB at 0x000b1bbe libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_03_0.VOB at 0x0012beee libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_03_1.VOB at 0x0012bef6 libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_04_0.VOB at 0x001ac49c libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_04_1.VOB at 0x001ac4a4 libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_05_0.VOB at 0x0022b528 libdvdread: Elapsed time 0 libdvdread: Get key for /VIDEO_TS/VTS_05_1.VOB at 0x0022b530
Bug#511898: xserver-xorg-video-intel: xorg experimental package does not startup my intel chipset see logs
Package: xserver-xorg-video-intel Version: 2:2.5.1-1 Severity: important I am typing this report from tty0 since my xorg is not working with my intel chipset on my eeepc 901. The screen startup in 800x600 and i cant move my mouse or use the keyboard I attached the xorg log file Thanks in advance, Jelle de Jong -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 2008-11-29 23:04 /etc/X11/X - /usr/bin/Xorg -rwxr-xr-x 1 root root 1623452 2008-11-11 23:26 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw--- 1 jelle jelle 1133 2008-11-29 23:35 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: Section Module Disable glx Disable dri EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option XkbRules xorg Option XkbModel pc105 Option XkbLayout us Option XkbOptionscompose:ralt EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer EndSection Section Device Identifier Configured Video Device EndSection Section Monitor Identifier Configured Monitor EndSection Section Screen Identifier Default Screen Monitor Configured Monitor Device Configured Video Device SubSection Display Virtual 1440 900 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen Default Screen Option BlankTime 0 Option StandbyTime 0 Option SuspendTime 0 Option OffTime 0 EndSection Xorg X server log files on system: -rw--- 1 root root 17159 2009-01-15 14:45 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (990, 'unstable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-video-intel depends on: ii libc6 2.7-18 GNU C Library: Shared libraries ii libdrm-inte 2.4.1+git+20081116+930c0e7-1 Userspace interface to Intel-speci ii libdrm2 2.4.3+git+20090105+a8c5480-1 Userspace interface to kernel rend ii libpciacces 0.10.5-1 Generic PCI access library for X ii xserver-xor 2:1.5.3-1Xorg X server - core server xserver-xorg-video-intel recommends no packages. xserver-xorg-video-intel suggests no packages. -- no debconf information X.Org X Server 1.5.3 Release Date: 5 November 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.26-1-686 i686 Debian Current Operating System: Linux debian-eeepc 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 Build Date: 11 November 2008 11:19:34PM xorg-server 2:1.5.3-1 (jcris...@debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Thu Jan 15 14:44:50 2009 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Configured Monitor (**) | |--Device Configured Video Device (**) Option BlankTime 0 (**) Option StandbyTime 0 (**) Option SuspendTime 0 (**) Option OffTime 0 (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in /usr/share/fonts/X11/100dpi/. Entry deleted from font path. (Run 'mkfontdir' on /usr/share/fonts/X11/100dpi/). (WW) The directory /usr/share/fonts/X11/75dpi/ does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in /usr/share/fonts/X11/100dpi. Entry deleted from font path. (Run 'mkfontdir' on /usr/share/fonts/X11/100dpi). (WW) The directory /usr/share/fonts/X11/75dpi does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, /var/lib/defoma/x-ttcidfont-conf.d/dirs
Bug#511898: output VGA using initial mode 640x480!
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 The fact that my keyboard and mouse where not working was my own mistake I forgot tho install the input drivers (pebkec). sudo aptitude install xserver-xorg-input-all However there is something broken: (II) intel(0): Output VGA connected (II) intel(0): Output LVDS connected (II) intel(0): Using fuzzy aspect match for initial modes (II) intel(0): Output VGA using initial mode 640x480 (II) intel(0): Output LVDS using initial mode 640x480 (II) intel(0): Monitoring connected displays enabled (II) intel(0): detected 256 kB GTT. (II) intel(0): detected 7932 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Intel XvMC decoder disabled (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled I don't know what the problem is but the screen resolutions is not set correctly. Best regards, Jelle de Jong -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAklvQ6kACgkQ1WclBW9j5HkHSAP8DstMOt/8RYSgOmFIfeH/5vX5 rpkgLiDzTCGmO69rTTNdarQNeBCmr3unntRgbxeVMvvnP0vuF6ALWYzaNGdh/UhE spdyhrFati5EsKLSYhS6YdMsh0ToZKZaYM1rVWib4Rq1X32eFhl4ozkElmQ7wyyg rMgz0QibVoEEYCBzkwU= =wbVZ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#511898: xserver-xorg-video-intel: xorg experimental package does not startup my intel chipset see logs
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Brice Goglin wrote: Jelle de Jong wrote: I am typing this report from tty0 since my xorg is not working with my intel chipset on my eeepc 901. The screen startup in 800x600 Do you actually have a VGA monitor plugged _and_ the internal panel enabled? Or are you only using the internal panel? By the way, I uploaded intel 2.6.0 to experimental today. Brice Hi Brice, I did some more testing, that took far more hours than I liked. I am now using 2:2.6.0-1 I cleaned up my Debian system and downgraded all my experimental packages back to unstable. After this I installed the xorg drivers from experimental and did some more testing. Yesterday I reported that the mouse and keyboard where not working, and that this was a pebkac, guess what, its not! The xserver-xorg-input-all had some issues... please see the attachments. The 800x600 resolution bug is also definitely there. I got a samsung syncmaster 940BW connected to my VGA port of my EeePC 901 laptop that also has LVDS. Normaly the VGA output gets initialized on the 1440x900 resolutions and I use a xrandr command to disable the LVDS output. Currently the vga output is 800x600 and the LVDS output is black but, not off! The backlight is still on. So neither the VGA or LVDS is correctly initialized with the new drivers. It gets more interesting: xrandr --output VGA --auto --output LVDS --off This works correctly and setup my 1440x900 vga only setup. xrandr --output LVDS --auto --output VGA --off This works correctly and setup my 1024x600 lvds only setup. xrandr --output VGA --mode 1280x768 --rate 60 --output LVDS --off This does not work anymore :-( I used this command to setup my beamer. The resolution is not in the xrandr -q output anymore. I can live with this issue, I will fix a workaround, hints are appreciated. Can you forwarding this report to somebody that can fix it? Thanks in advance, Best regards, Jelle de Jong -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAklwkcIACgkQ1WclBW9j5HkV1wP/aN652dmYh2WUzMeJ1bvqeh0V RKE+p6Z69kd7UP6vlwbbKFkTyd8lvdpJkLHkcAjtkDRroOclvNzB35i8Lh/m9Mhi Z6poeo2Cm8pmVsFQtiQQsRYglK8uBjgmfbdOtE40Yy+hkvFpKwNGslBW8veGLWw9 483nle9uQp1CFpvbJjY= =xQIm -END PGP SIGNATURE- sudo aptitude install -t experimental xserver-xorg-video-intel Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Writing extended state information... Done The following packages are BROKEN: xserver-xorg-input-all The following NEW packages will be installed: libdrm-intel1{a} libdrm2{a} x11-xkb-utils{a} xserver-common{a} xserver-xorg{a} xserver-xorg-core{a} xserver-xorg-video-intel The following packages will be REMOVED: iso-codes{u} libcamel1.2-11{u} libedataserver1.2-9{u} liblircclient0{u} libmodplug0c2{u} libopenal1{u} libtotem-plparser10{u} libxcb-shape0{u} libxcb-shm0{u} libxcb-xv0{u} libxine1-misc-plugins{u} libxine1-plugins{u} libxtrap6{u} libxxf86dga1{u} libxxf86misc1{u} libxxf86vm1{u} mplayer-skin-blue{u} totem-common{u} The following packages are RECOMMENDED but will NOT be installed: libgl1-mesa-dri 0 packages upgraded, 8 newly installed, 18 to remove and 208 not upgraded. Need to get 583kB/3534kB of archives. After unpacking 14.5MB will be freed. The following packages have unmet dependencies: xserver-xorg-input-all: Depends: xserver-xorg-input-evdev but it is not installable Depends: xserver-xorg-input-kbd but it is not installable Depends: xserver-xorg-input-mouse but it is not installable Depends: xserver-xorg-input-synaptics but it is not installable Depends: xserver-xorg-input-wacom but it is not installable The following actions will resolve these dependencies: Install the following packages: xserver-xorg-input-synaptics [0.15.0+git20080820-1 (experimental)] Keep the following packages at their current version: xserver-xorg-input-all [Not Installed] Score is 50 Accept this solution? [Y/n/q/?] rmadison xserver-xorg-video-intel rmadison x11-xserver-utils sudo aptitude install -t experimental xserver-xorg-video-intel sudo aptitude install -t experimental xfonts-cyrillic xfonts-scalable xfonts-100dpi xfonts-75dpi xfonts-base sudo aptitude install -t experimental xauth x11-xserver-utils sudo aptitude install -t experimental xserver-xorg-input-kbd xserver-xorg-input-mouse xserver-xorg-input-evdev xserver-xorg-input-synaptics apt-show-versions | fgrep /experimental libdrm-intel1/experimental uptodate 2.4.3+git+20090105+a8c5480-1 libdrm2/experimental uptodate 2.4.3+git+20090105+a8c5480-1
Bug#512066: problem identified
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I did some research and the problem is that there is no hostname. The below command fix this. up to the next issue. unset LANG echo emdebian | tee /etc/hostname echo 127.0.0.1emdebian localhost.localdomain localhost | tee /etc/hosts dpkg --configure -a Best regards, Jel -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAklw+DcACgkQ1WclBW9j5HnwmAP/U9rCUm0o6IyWf+n/ROtz7Ji6 pKaXGc2s59XFip8hKE3B1LNqnqmEzf+dcxL5IaEmvlvH4znWHu8imfyL3fD5c91c qKMN/nuZwrB2WIgYelXNW2VHaKsJiU9zv31xE6edkfC4TiI1i6LfxUK2/ofFMxRj f2lr1A5JHSd7dZo2GWo= =XkZg -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#512066: debootstrap: encountered while processing: ssmtp
Package: buildd.emdebian.org Severity: normal Testing the debootstrap again, and decided to report the failures. See the attachement for the complete log. Thanks for all the hard work, Jelle -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (990, 'unstable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash # mount /dev/sda1 /mnt/debinst # debootstrap --arch i386 sid /mnt/debinst/ http://buildd.emdebian.org/grip/ I: Retrieving Release I: Retrieving Packages I: Validating Packages I: Resolving dependencies of required packages... I: Resolving dependencies of base packages... I: Found additional required dependencies: adduser apt avahi-autoipd dash debconf debconf-i18n debian-archive-keyring dhcp3-client dhcp3-common gnupg gpgv ifupdown libbz2-1.0 libdaemon0 libdb4.6 libgcrypt11 libgnutls26 libgpg-error0 libiw29 libncursesw5 libnewt0.52 libpopt0 libreadline5 libssl0.9.8 libtasn1-3 libusb-0.1-4 lrzsz lzma module-init-tools nano net-tools netbase ntpdate readline-common ssmtp udev wget whiptail wireless-tools I: Found additional base dependencies: libept0 libsigc++-2.0-0c2a libxapian15 I: Checking component main on http://buildd.emdebian.org/grip... I: Retrieving adduser I: Validating adduser I: Retrieving apt I: Validating apt I: Retrieving apt-utils I: Validating apt-utils I: Retrieving aptitude I: Validating aptitude I: Retrieving at I: Validating at I: Retrieving avahi-autoipd I: Validating avahi-autoipd I: Retrieving balloon3-config I: Validating balloon3-config I: Retrieving base-files I: Validating base-files I: Retrieving base-passwd I: Validating base-passwd I: Retrieving bash I: Validating bash I: Retrieving bsdmainutils I: Validating bsdmainutils I: Retrieving bsdutils I: Validating bsdutils I: Retrieving coreutils I: Validating coreutils I: Retrieving cpio I: Validating cpio I: Retrieving cron I: Validating cron I: Retrieving dash I: Validating dash I: Retrieving debconf I: Validating debconf I: Retrieving debconf-i18n I: Validating debconf-i18n I: Retrieving debian-archive-keyring I: Validating debian-archive-keyring I: Retrieving debianutils I: Validating debianutils I: Retrieving dhcp3-client I: Validating dhcp3-client I: Retrieving dhcp3-common I: Validating dhcp3-common I: Retrieving diff I: Validating diff I: Retrieving dmidecode I: Validating dmidecode I: Retrieving dpkg I: Validating dpkg I: Retrieving e2fslibs I: Validating e2fslibs I: Retrieving e2fsprogs I: Validating e2fsprogs I: Retrieving ed I: Validating ed I: Retrieving findutils I: Validating findutils I: Retrieving gcc-4.3-base I: Validating gcc-4.3-base I: Retrieving gnupg I: Validating gnupg I: Retrieving gpgv I: Validating gpgv I: Retrieving grep I: Validating grep I: Retrieving grip-config I: Validating grip-config I: Retrieving groff-base I: Validating groff-base I: Retrieving gzip I: Validating gzip I: Retrieving hostname I: Validating hostname I: Retrieving ifupdown I: Validating ifupdown I: Retrieving initscripts I: Validating initscripts I: Retrieving iproute I: Validating iproute I: Retrieving iptables I: Validating iptables I: Retrieving iputils-ping I: Validating iputils-ping I: Retrieving libacl1 I: Validating libacl1 I: Retrieving libattr1 I: Validating libattr1 I: Retrieving libblkid1 I: Validating libblkid1 I: Retrieving libbz2-1.0 I: Validating libbz2-1.0 I: Retrieving libc6 I: Validating libc6 I: Retrieving libcap1 I: Validating libcap1 I: Retrieving libcomerr2 I: Validating libcomerr2 I: Retrieving libcwidget3 I: Validating libcwidget3 I: Retrieving libdaemon0 I: Validating libdaemon0 I: Retrieving libdb4.6 I: Validating libdb4.6 I: Retrieving libdevmapper1.02.1 I: Validating libdevmapper1.02.1 I: Retrieving libept0 I: Validating libept0 I: Retrieving libgcc1 I: Validating libgcc1 I: Retrieving libgcrypt11 I: Validating libgcrypt11 I: Retrieving libgdbm3 I: Validating libgdbm3 I: Retrieving libgnutls26 I: Validating libgnutls26 I: Retrieving libgpg-error0 I: Validating libgpg-error0 I: Retrieving libiw29 I: Validating libiw29 I: Retrieving liblocale-gettext-perl I: Validating liblocale-gettext-perl I: Retrieving liblzo2-2 I: Validating liblzo2-2 I: Retrieving libncurses5 I: Validating libncurses5 I: Retrieving libncursesw5 I: Validating libncursesw5 I: Retrieving libnewt0.52 I: Validating libnewt0.52 I: Retrieving libpam-modules I: Validating libpam-modules I: Retrieving libpam-runtime I: Validating libpam-runtime I: Retrieving libpam0g I: Validating libpam0g I: Retrieving libpcre3 I: Validating libpcre3 I: Retrieving libpopt0 I: Validating libpopt0 I: Retrieving libreadline5 I: Validating libreadline5 I: Retrieving libsasl2-2 I: Validating libsasl2-2 I: Retrieving libselinux1 I: Validating libselinux1 I: Retrieving libsepol1 I: Validating libsepol1 I: Retrieving libsigc++-2.0-0c2a I: Validating libsigc++-2.0-0c2a I: Retrieving
Bug#512067: debootstrap: sysvinit: init: timeout opening/writing control channel /dev/initctl
Package: buildd.emdebian.org Severity: normal Reporting an other issue when trying to debootstrap, workaround can be found below. Please see the attachment for more information. I: Unpacking the base system... W: Failure while installing base packages. This will be re-attempted up to five times. W: Failure while installing base packages. This will be re-attempted up to five times. W: Failure while installing base packages. This will be re-attempted up to five times. W: Failure while installing base packages. This will be re-attempted up to five times. init: timeout opening/writing control channel /dev/initctl Workaround: mount -o bind /dev /mnt/debinst/dev/ chroot /mnt/debinst/ unset LANG dpkg --configure -a dpkg-reconfigure sysvinit -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (990, 'unstable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash ~# debootstrap --arch i386 sid /mnt/debinst/ http://buildd.emdebian I: Retrieving Release I: Retrieving Packages I: Validating Packages I: Resolving dependencies of required packages... I: Resolving dependencies of base packages... I: Found additional required dependencies: adduser apt avahi-autoipd dash debconf debconf-i18n debian-archive-keyring dhcp3-client dhcp3-common gnupg gpgv ifupdown libbz2-1.0 libdaemon0 libdb4.6 libgcrypt11 libgnutls26 libgpg-error0 libiw29 libncursesw5 libnewt0.52 libpopt0 libreadline5 libssl0.9.8 libtasn1-3 libusb-0.1-4 lrzsz lzma module-init-tools nano net-tools netbase ntpdate readline-common ssmtp udev wget whiptail wireless-tools I: Found additional base dependencies: libept0 libsigc++-2.0-0c2a libxapian15 I: Checking component main on http://buildd.emdebian.org/grip... I: Retrieving adduser I: Validating adduser I: Retrieving apt I: Validating apt I: Retrieving apt-utils I: Validating apt-utils I: Retrieving aptitude I: Validating aptitude I: Retrieving at I: Validating at I: Retrieving avahi-autoipd I: Validating avahi-autoipd I: Retrieving balloon3-config I: Validating balloon3-config I: Retrieving base-files I: Validating base-files I: Retrieving base-passwd I: Validating base-passwd I: Retrieving bash I: Validating bash I: Retrieving bsdmainutils I: Validating bsdmainutils I: Retrieving bsdutils I: Validating bsdutils I: Retrieving coreutils I: Validating coreutils I: Retrieving cpio I: Validating cpio I: Retrieving cron I: Validating cron I: Retrieving dash I: Validating dash I: Retrieving debconf I: Validating debconf I: Retrieving debconf-i18n I: Validating debconf-i18n I: Retrieving debian-archive-keyring I: Validating debian-archive-keyring I: Retrieving debianutils I: Validating debianutils I: Retrieving dhcp3-client I: Validating dhcp3-client I: Retrieving dhcp3-common I: Validating dhcp3-common I: Retrieving diff I: Validating diff I: Retrieving dmidecode I: Validating dmidecode I: Retrieving dpkg I: Validating dpkg I: Retrieving e2fslibs I: Validating e2fslibs I: Retrieving e2fsprogs I: Validating e2fsprogs I: Retrieving ed I: Validating ed I: Retrieving findutils I: Validating findutils I: Retrieving gcc-4.3-base I: Validating gcc-4.3-base I: Retrieving gnupg I: Validating gnupg I: Retrieving gpgv I: Validating gpgv I: Retrieving grep I: Validating grep I: Retrieving grip-config I: Validating grip-config I: Retrieving groff-base I: Validating groff-base I: Retrieving gzip I: Validating gzip I: Retrieving hostname I: Validating hostname I: Retrieving ifupdown I: Validating ifupdown I: Retrieving initscripts I: Validating initscripts I: Retrieving iproute I: Validating iproute I: Retrieving iptables I: Validating iptables I: Retrieving iputils-ping I: Validating iputils-ping I: Retrieving libacl1 I: Validating libacl1 I: Retrieving libattr1 I: Validating libattr1 I: Retrieving libblkid1 I: Validating libblkid1 I: Retrieving libbz2-1.0 I: Validating libbz2-1.0 I: Retrieving libc6 I: Validating libc6 I: Retrieving libcap1 I: Validating libcap1 I: Retrieving libcomerr2 I: Validating libcomerr2 I: Retrieving libcwidget3 I: Validating libcwidget3 I: Retrieving libdaemon0 I: Validating libdaemon0 I: Retrieving libdb4.6 I: Validating libdb4.6 I: Retrieving libdevmapper1.02.1 I: Validating libdevmapper1.02.1 I: Retrieving libept0 I: Validating libept0 I: Retrieving libgcc1 I: Validating libgcc1 I: Retrieving libgcrypt11 I: Validating libgcrypt11 I: Retrieving libgdbm3 I: Validating libgdbm3 I: Retrieving libgnutls26 I: Validating libgnutls26 I: Retrieving libgpg-error0 I: Validating libgpg-error0 I: Retrieving libiw29 I: Validating libiw29 I: Retrieving liblocale-gettext-perl I: Validating liblocale-gettext-perl I: Retrieving liblzo2-2 I: Validating liblzo2-2 I: Retrieving libncurses5 I: Validating libncurses5 I: Retrieving libncursesw5 I: Validating libncursesw5 I: Retrieving libnewt0.52 I: Validating libnewt0.52 I: Retrieving
Bug#512067: hmm, the workaround did not fully work.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 It seems that the workaround i used does not really work, and i am stuck now. I cant get a successful debootstrap. When i chroot into the environment i dont get any errors or warining using dpkg .. but when running the debootstrap command I get the timeout errors and debootstrap fails, even with the dev system mounted! So i am stuck until this is fixed... mount -o bind /dev /mnt/debinst/dev/ chroot /mnt/debinst/ unset LANG dpkg --configure -a dpkg-reconfigure sysvinit dpkg --configure -a dpkg --configure -a debootstrap --arch i386 sid /mnt/debinst/ http://buildd.emdebian.org/grip/ I: Unpacking the base system... W: Failure while installing base packages. This will be re-attempted up to five times. W: Failure while installing base packages. This will be re-attempted up to five times. W: Failure while installing base packages. This will be re-attempted up to five times. W: Failure while installing base packages. This will be re-attempted up to five times. Best regards, Jelle de Jong -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAklxA+QACgkQ1WclBW9j5HnejQP/Xs0UXn7UbnjpOSMvvTTm796Y VXR8BWz0HXenNfXAp4rK5BOjqQxaOvVf2zTtEFFGKLs9TzhiPWc+qdTcpVsY8Cwy cXHg69tWUyvYUSjdrgOmpanq6vYMVap3g6kEPzUwEyOmMKiWQyeAB1U2M1sWhL5L gp5PAZk0s7TVYH2K66Q= =HY8y -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#512066: problem identified
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Neil Williams wrote: Package: buildd.emdebian.org tag 512066 + confirmed retitle 512066 debootstrap needs customised hostname handling severity 512066 important thanks On Fri, 16 Jan 2009 22:12:25 +0100 Jelle de Jong jelledej...@powercraft.nl wrote: I did some research and the problem is that there is no hostname. The below command fix this. up to the next issue. unset LANG echo emdebian | tee /etc/hostname echo 127.0.0.1emdebian localhost.localdomain localhost | tee /etc/hosts dpkg --configure -a Yes, this is an old (-ish) bug but it's difficult to see how to fix it without using Debian-Installer to set a user-specified hostname. Setting a default hostname is problematic. Copying the hostname of the host system is normal practice for a chroot because it's not expected to copy that debootstrap onto a completely different machine. Whatever scripts people use to copy the debootstrap onto the device need to make that decision and implement the appropriate fix. Ideas? I am wondering, when doing a normal debootstrap of sid or lenny, it just takes the hostname of the debootstraping system, this always worked fine... what is diffrent with emdebian that this does not work. Can't it just copy the /etc/hostname /etc/hosts /etc/resolv.conf and you got a working network directly after chrooting. This bug is no stopper, it just needs to be documentation correctly. It is just not so nice that debootstrap fails, it should run in one time 100% successful :-D Best regards, Jelle -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAklxBeUACgkQ1WclBW9j5HmmVQP/dp+xoKYqYbMTcD1CMADk+/8U ijvW3jlJPyAeCSkrtVdsACmX9CFDyqTXCByIIT6phlrpHuJy0drJiH6RVHd+irAt T4jIvmnHTWldE5rlm12CeZWrzKnO5P/z1xwWYeSktqC2pFc2iYAYfgROec8qeEHN qTXovSd04xBn9DNlSFM= =+xJi -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#503391: geany should write to file when there is no diskspace
Today I got an other disappointed experience with Geany. I was working on some large bash program while I run out of disk space due to some test converting script running in the background. I hit the save button of the script I was working on and the script was over written to a 0 (zero) size document losing the complete document. Geany should stop doing this, and should not write to the file when there is no space! I had to investigate my complete hard disk and memory to recover some parts of the program... Best regards, Jelle -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#503391: geany should write to file when there is no diskspace
Today I got an other disappointed experience with Geany. I was working on some large bash program while I run out of disk space due to some test converting script running in the background. I hit the save button of the script I was working on and the script was over written to a 0 (zero) size document losing the complete document. Geany should stop doing this, and should not write to the file when there is no space! The user should take care of his system and the disk space. Anyway, I definitely will fix the issue that configuration files will get lost when there is no disk space available sometime this week. And probably also for normal documents files (though I'm still not convinced of the need of this). I had to investigate my complete hard disk and memory to recover some You should investigate your shell script which ate all of your available disk space. This is the real bug, IMO. (SCNR) Regards, Enrico Hi Enrico, You are right the user should take care of his disk space. The script that run was not really to blame, it generated 2GB raw scanned images on a 4 GB disk, warning of no more disk space came up but was to late. But this is not the problem behind losing the working files that geany had opened. Geany should provide a fail to save error and catch the exception. It should then not renew the displayed contained of the file. But should let the user provide an other place to store the file. This way the current work will not be lost. Thanks in advance for any fixes, Are you goging to fosdem? Then I can buy you a beer for the great Geany tool. Best regards, Jelle de Jong -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#512341: xbindkeys scheme setup stops working, with the newer xserver-xorg-core 2:1.5.3-1
Package: xbindkeys Version: 1.8.2-1 Severity: important Hello everybody, I am testing the newer xorg packages and after this version upgrade my xbindkeys scheme configuration did not work anymore. I used a configration like this: (xbindkey '(XF86HomePage) /usr/bin/iceweasel) (xbindkey '(XF86Explorer) /usr/bin/thunar) But this does not work anymore and makes the complete keyboard break, you see the cursor point flashing but no text comes there when pressing keys. I had to swith back to all manual hardcoded scancodes to get my xbindkeys workign again. I think I swiched driver form xbd to evdev and evdev does not seem work correctly with xbindkeys ... See the attached xbindkeys scheme config that i need to use now the ; ... i want to use but do not work Thanks in advance, Jelle de Jong xbindkeys/unstable uptodate 1.8.2-1 xserver-common/experimental uptodate 2:1.5.3-1 xserver-xorg/experimental uptodate 1:7.4~4 xserver-xorg-core/experimental uptodate 2:1.5.3-1 xserver-xorg-input-evdev/experimental uptodate 1:2.1.0-1 xserver-xorg-input-kbd/experimental uptodate 1:1.3.1-2 xserver-xorg-input-mouse/experimental uptodate 1:1.3.0-2 xserver-xorg-input-synaptics/experimental uptodate 0.15.0+git20080820-1 xserver-xorg-video-intel/experimental uptodate 2:2.6.0-1 -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (990, 'unstable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages xbindkeys depends on: ii guile-1.6-libs 1.6.8-6.1Main Guile libraries ii libc6 2.7-18 GNU C Library: Shared libraries ii libguile-ltdl-1 1.6.8-6.1Guile's patched version of libtool ii libqthreads-12 1.6.8-6.1QuickThreads library for Guile ii libx11-62:1.1.99.2-1 X11 client-side library xbindkeys recommends no packages. Versions of packages xbindkeys suggests: ii tk8.4 [wish] 8.4.19-2 Tk toolkit for Tcl and X11, v8.4 - pn xbindkeys-config none (no description available) -- no debconf information ; back (xbindkey '(m:0x0 c:167) /bin/true) ;(xbindkey '(XF86Back) /bin/true) ; forward (xbindkey '(m:0x0 c:167) /bin/true) ;(xbindkey '(XF86Forward) /bin/true) ; stop (xbindkey '(m:0x0 c:136) /usr/bin/xterm -e /usr/bin/sudo /sbin/shutdown -h now) ;(xbindkey '(Cancel) /usr/bin/xterm -e /usr/bin/sudo /sbin/shutdown -h now) ; refresh (xbindkey '(m:0x0 c:181) /usr/bin/xterm -e /usr/bin/sudo /sbin/shutdown -r now) ;(xbindkey '(XF86Refresh) /usr/bin/xterm -e /usr/bin/sudo /sbin/shutdown -r now) ; home (xbindkey '(m:0x0 c:180) /usr/bin/iceweasel) ;(xbindkey '(XF86HomePage) /usr/bin/iceweasel) ; email (xbindkey '(m:0x0 c:163) /usr/bin/icedove) ;(xbindkey '(XF86Mail) /usr/bin/icedove) ; computer (xbindkey '(m:0x0 c:152) /usr/bin/thunar) ;(xbindkey '(XF86Explorer) /usr/bin/thunar) ; calculator (xbindkey '(m:0x0 c:148) /usr/bin/gcalctool) ;(xbindkey '(XF86Calculator) /usr/bin/gcalctool) ; mute (xbindkey '(m:0x0 c:121) /usr/bin/totem --fullscreen) ;(xbindkey '(XF86AudioMute) /usr/bin/totem --fullscreen) ; stop (xbindkey '(m:0x0 c:174) /usr/bin/screen -d -m -x radio-screen -X quit) ;(xbindkey '(XF86AudioStop) /usr/bin/screen -d -m -x radio-screen -X quit) ; previous (xbindkey '(m:0x0 c:173) /usr/bin/totem --previous) ;(xbindkey '(XF86AudioPrev) /usr/bin/totem --previous) ; next (xbindkey '(m:0x0 c:171) /usr/bin/totem --next) ;(xbindkey '(XF86AudioNext) /usr/bin/totem --next) ; play/pause (xbindkey '(m:0x0 c:172) /usr/bin/totem --play-pause) ;(xbindkey '(XF86AudioPlay) /usr/bin/totem --play-pause) ; music (xbindkey '(m:0x0 c:179) /usr/bin/xfce4-terminal --execute bash /usr/share/pct-thunar-scripts/scripts/play-internetradio $HOME/.shoutcastlive.pls) ;(xbindkey '(XF86Tools) /usr/bin/xfce4-terminal --execute bash /usr/share/pct-thunar-scripts/scripts/play-internetradio $HOME/.shoutcastlive.pls) ; volume down (xbindkey '(m:0x0 c:122) /usr/bin/amixer set 'Master' 5%- -q; /usr/bin/amixer set 'Headset' 5%- -q) ;(xbindkey '(XF86AudioLowerVolume) /usr/bin/amixer set 'Master' 5%- -q) ;(xbindkey '(XF86AudioLowerVolume) /usr/bin/amixer set 'Headset' 5%- -q) ; volume up (xbindkey '(m:0x0 c:123) /usr/bin/amixer set 'Master' 5%+ -q; /usr/bin/amixer set 'Headset' 5%+ -q) ;(xbindkey '(XF86AudioRaiseVolume) /usr/bin/amixer set 'Master' 5%+ -q) ;(xbindkey '(XF86AudioRaiseVolume) /usr/bin/amixer set 'Headset' 5%+ -q) ; print screen (xbindkey '(m:0x0 c:107) /usr/bin/scrot) ; (xbindkey '(Print) /usr/bin/scrot)
Bug#512067: debootstrap: sysvinit: init: timeout opening/writing control channel /dev/initctl
I: Unpacking the base system... W: Failure while installing base packages. This will be re-attempted up to five times. W: Failure while installing base packages. This will be re-attempted up to five times. W: Failure while installing base packages. This will be re-attempted up to five times. W: Failure while installing base packages. This will be re-attempted up to five times. init: timeout opening/writing control channel /dev/initctl That should not be the problem here, as the behaviour is correct. When installing into the chroot, the currently running init should not be restarted during configuration of the sysvinit package; the package knows to ignore this error. mount -o bind /dev /mnt/debinst/dev/ chroot /mnt/debinst/ unset LANG dpkg --configure -a dpkg-reconfigure sysvinit That's not a good idea; there is no guarantee that the outer system's init is compatible with the chroot's; also, there is no point in restarting the outer system's init process as it hasn't been changed. As an optimization, one might think about chroot detection in sysvinit's postinst so the restart isn't attempted. I'm not convinced this is the actual reason why configuration fails; rather, I think it might be some other package that is confused by not having a working /dev (such as a program in a postinst opening /dev/tty). Simon Ok that sounds logical, the binding of the /dev is indeed not a good idea. I tried it to see if I could get more info on the issue. I don't know what to do next... Any ideas how to proceed? Neil tolled me the issue does not come up on his system, so some info about my test system: I am using an debian sid updated installation on a usb stick with grub. I use an eeepc 701 that boots completely from the usb sticks and I try to debootstrap the installation on the ssd of the eeepc for testing. Best regards, Jelle btw why is sub...@bugs.debian.org in the cc field? -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#512522: ITP: pct-scanner-scripts -- easy scan and create merged djvu and pdf documents for archiving
Package: wnpp Severity: wishlist Owner: Jelle de Jong jelledej...@powercraft.nl Package is part of the possible upcomming pct-desktop-environment, I want to start getting my stable packages into the debian repository. Release often, release soon :-D. Request for sponsering will come to. Thanks in advance, Jelle de Jong Package name: pct-scanner-scripts Version : 0.0.2 Upstream Author : Jelle de Jong jelledej...@powercraft.nl URL : https://secure.powercraft.nl/svn/packages/trunk/deb/pct-scanner-scripts/ License : (GPLv3) Programming Lang: (BASH) Description : easy scan and create merged djvu and pdf documents for archiving This package contains a script and configuration system to easy scan documents and create a digital archiving. It can create djvu pdf and jpg outputs, in merged and single files. It also has a configuration file system where different configurations can be defined, this makes it easy to switching between configurations. The script is designed for productivity, and the package is maintained by PowerCraft Technology. Take a look at the --help argument for all the useful and simple options of this tool. This program is a helper script to easy scan and automated digital document archiving for normal and adf scanners. You can debug this script by running it as bash -x pct-scanner-script [options]. The script is just a nice wrapper for the scanadf, djvu and pdf tools -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (990, 'unstable'), (50, 'experimental') Architecture: i386 (i686) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org