Bug#509651: closed by Ari Pollak (Re: Bug#509651: Gimp (2.2): Script Causes Crash, Then Writes to Drive at ~1GB/min)
> This is an automatic notification regarding your Bug report > which was filed against the gimp package: > > #509651: Gimp (2.2): Script Causes Crash, Then Writes to Drive at ~1GB/min > > It has been closed by Ari Pollak . > > Their explanation is attached below along with your original report. If this explanation is unsatisfactory and you have not received a better one in a separate message then please contact Ari Pollak > by > replying to this email. > > > -- > 509651: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=509651 > Debian Bug Tracking System > Contact ow...@bugs.debian.org with problems > your response was: "Version: 2.4.0-1 There are multiple things going on here: - A misbehaving script interacting badly with gimp 2.2 - The gimp process wasn't exited cleanly, so it didn't clean up its temp files - Ext3 filesystems have space reserved for root by default" I'm not sure who responded to my original message, but this response is certainly not adequate. I'm sure you get false bug reports from noobs all the time, and maybe this is another one; however, I would like to point out that my time is at least as valuable as any member of the debian team. I spent many hours attempting to solve this bug and following the bug reporting instructions line-by-line, making a conscious effort to not waste someone else's time. Does the response I got mean that it has been decided that there is no bug. Does it mean that you don't care about bugs in gimp 2.2 because a newer version of gimp is available (I just checked again, and it says that my version of gimp, 2.2.13-1etch4, is the latest one for etch, which is the latest stable release)? Did anyone even run the script to duplicate the results? A program that allows a script to behave badly has a bug. I just checked the gimp documentation, and it didn't mention anything about the dangers of running new scripts on older versions (of course, it's the software's job to check). A program that doesn't clean-up it's temp files has a bug, especially when that program was restarted and closed "cleanly". Could you please tell me where these unclean temp files are? They aren't in my /tmp directory. Apparently, there is space reserved for root. I came across this explanation as a reason for a disk discrepancy. Silly me for dismissing it, thinking that it would be electronically insane to automatically reserve 10GB of space for root, bill gates would be proud. Because this is free software, I certainly don't expect anything; however, honesty is appreciated. If you don't care about this bug, please just be honest and say that you have no desire to create bug-free code. I can spend my valuable time figuring out a work around on my own. nate carr -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509633: pidgin crashes randomly
If you run gstreamer-properties and set the output plugin to ALSA, then set Pidgin back to Automatic sounds, I assume it works again? -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Processed: 507382
Processing commands for cont...@bugs.debian.org: > tag 507382 patch Bug#507382: gourmet: Crashes just after starting There were no tags set. Tags added: patch > thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#507382: gourmet: Crashes just after starting
I also see this behaviour, and it is because the intial data imported has the Spanish ~n character in it. A patch is attached that fixes this for my locales, en and en_GB, by replacing the character with a regular 'n'. -- Jonathan Wiltshire PGP/GPG: 0xDB800B52 / 4216 F01F DCA9 21AC F3D3 A903 CA6B EA3E DB80 0B52 Sending of encrypted mail is encouraged Index: gourmet-0.14.2/src/lib/defaults/defaults_en.py === --- gourmet-0.14.2.orig/src/lib/defaults/defaults_en.py 2008-12-25 01:28:56.0 + +++ gourmet-0.14.2/src/lib/defaults/defaults_en.py 2008-12-25 01:29:04.0 + @@ -186,7 +186,7 @@ ["green pepper","bell pepper, green","produce"], ["red bell pepper","bell pepper, red","produce"], ["chilli pepper","chilli pepper","produce"], - ["jalapeño pepper","pepper, jalapeño","produce"], + ["jalapeno pepper","pepper, jalapeno","produce"], ["habanero pepper","pepper, habanero","produce"], ["radicchio","radicchio","produce"], ["rapini","rapini","produce"], Index: gourmet-0.14.2/src/lib/defaults/defaults_en_GB.py === --- gourmet-0.14.2.orig/src/lib/defaults/defaults_en_GB.py 2008-12-25 01:29:11.0 + +++ gourmet-0.14.2/src/lib/defaults/defaults_en_GB.py 2008-12-25 01:29:20.0 + @@ -121,7 +121,7 @@ ["pepper","pepper","produce"], ["red bell pepper","red bell pepper","produce"], ["chilli pepper","chilli pepper","produce"], - ["jalapeño pepper","pepper, jalapeño","produce"], + ["jalapeno pepper","pepper, jalapeno","produce"], ["habanero pepper","pepper, habanero","produce"], ["radicchio","radicchio","produce"], ["rapini","rapini","produce"], signature.asc Description: Digital signature
Processed: severity of 509700 is normal
Processing commands for cont...@bugs.debian.org: > # Automatically generated email from bts, devscripts version 2.10.35lenny1 > severity 509700 normal Bug#509700: kernel: modules:padlock-aes.ko trying exception Severity set to `normal' from `critical' > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Processed: reassign 500926 to python-ctypes
Processing commands for cont...@bugs.debian.org: > reassign 500926 python-ctypes Bug#500926: python-ctypes: Depend or Recommend binutils Bug reassigned from package `python2.5' to `python-ctypes'. > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#500926: marked as done (python-ctypes: Depend or Recommend binutils)
Your message dated Thu, 25 Dec 2008 01:49:56 +0100
with message-id <8b2d7b4d0812241649k5d696c70kbb76270f43469...@mail.gmail.com>
and subject line Closed with 1.0.2-6 upload
has caused the Debian Bug report #500926,
regarding python-ctypes: Depend or Recommend binutils
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
500926: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=500926
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: python-ctypes
Version: 1.0.2-2
Severity: important
Hi,
if you install python-ctypes on a minimal debootstrap system and run
the code:
import ctypes
import ctypes.util
ctypes.util.find_library('c')
you will get an empty string from the find_library function, while the
expected value should be 'libc.so.6'.
To make it work you have to install the binutils package, which I'd
consider a dependency of python-ctypes.
I'm setting priority "important" because this bug makes some part of
python-ctypes unusable. It would be nice to fix this in Lenny as well.
Thanks,
Free Ekanayaka
--- End Message ---
--- Begin Message ---
Version: 1.0.2-6
With 1.0.2-6 this bug is fixed
--
Sandro Tosi (aka morph, Morpheus, matrixhasu)
My website: http://matrixhasu.altervista.org/
Me at Debian: http://wiki.debian.org/SandroTosi
--- End Message ---
Processed (with 1 errors): unmerging 500926, forcibly merging 509623 500926
Processing commands for cont...@bugs.debian.org: > unmerge 500926 Bug#500926: python-ctypes: Depend or Recommend binutils Bug#509697: python2.5 misses dependency on binutils Disconnected #500926 from all other report(s). > forcemerge 509623 500926 Bug#509623: python-ctypes misses dependency on binutils Bug#500926: python-ctypes: Depend or Recommend binutils Mismatch - only Bugs in the same package can be forcibly merged: Bug 500926 is not in the same package as 509623 > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509623: marked as done (python-ctypes misses dependency on binutils)
Your message dated Thu, 25 Dec 2008 00:32:03 +
with message-id
and subject line Bug#509623: fixed in ctypes 1.0.2-6
has caused the Debian Bug report #509623,
regarding python-ctypes misses dependency on binutils
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
509623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=509623
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: fretsonfire
Version: 1.2.512.dfsg-3
Severity: grave
I have just apt-get installed fretsonfire on an amd64 lenny system (with
nvidia proprietary OpenGl) and it refuses to start:
Traceback (most recent call last):
File "./FretsOnFire.py", line 36, in
from GameEngine import GameEngine
File "/usr/share/games/fretsonfire/game/GameEngine.py", line 23, in
from OpenGL.GL import *
File "/usr/lib/python2.5/site-packages/OpenGL/GL/__init__.py", line 2,
in
from OpenGL.raw.GL import *
File "/usr/lib/python2.5/site-packages/OpenGL/raw/GL/__init__.py",
line 6, in
from OpenGL.raw.GL.constants import *
File "/usr/lib/python2.5/site-packages/OpenGL/raw/GL/constants.py",
line 7, in
from OpenGL import platform, arrays
File "/usr/lib/python2.5/site-packages/OpenGL/platform/__init__.py",
line 36, in
_load()
File "/usr/lib/python2.5/site-packages/OpenGL/platform/__init__.py",
line 27, in _load
plugin_class = plugin.load()
File "/usr/lib/python2.5/site-packages/OpenGL/plugins.py", line 14, in
load
return importByName( self.import_path )
File "/usr/lib/python2.5/site-packages/OpenGL/plugins.py", line 28, in
importByName
module = __import__( ".".join(moduleName), {}, {}, moduleName)
File "/usr/lib/python2.5/site-packages/OpenGL/platform/glx.py", line
8, in
class GLXPlatform( baseplatform.BasePlatform ):
File "/usr/lib/python2.5/site-packages/OpenGL/platform/glx.py", line
16, in GLXPlatform
mode=ctypes.RTLD_GLOBAL
File
"/usr/lib/python2.5/site-packages/OpenGL/platform/ctypesloader.py", line
42, in loadLibrary
return dllType( name, mode )
File "/usr/lib/python2.5/ctypes/__init__.py", line 348, in __init__
self._handle = _dlopen(self._name, mode)
OSError: ('GL: cannot open shared object file: No such file or
directory', 'GL', None)
On another amd64 box (with ATI prop. OpengGl) it starts without any
problem. Not shure if this is a missing dependency or something special
in OpenGl.
Sincerely,
Joachim
--- End Message ---
--- Begin Message ---
Source: ctypes
Source-Version: 1.0.2-6
We believe that the bug you reported is fixed in the latest version of
ctypes, which is due to be installed in the Debian FTP archive:
ctypes_1.0.2-6.diff.gz
to pool/main/c/ctypes/ctypes_1.0.2-6.diff.gz
ctypes_1.0.2-6.dsc
to pool/main/c/ctypes/ctypes_1.0.2-6.dsc
python-ctypes_1.0.2-6_amd64.deb
to pool/main/c/ctypes/python-ctypes_1.0.2-6_amd64.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 509...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Debian Python Modules Team
(supplier of updated ctypes package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@debian.org)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Format: 1.8
Date: Thu, 25 Dec 2008 00:49:16 +0100
Source: ctypes
Binary: python-ctypes
Architecture: source amd64
Version: 1.0.2-6
Distribution: unstable
Urgency: medium
Maintainer: Ganesan Rajagopal
Changed-By: Debian Python Modules Team
Description:
python-ctypes - Python package to create and manipulate C data types
Closes: 509623
Changes:
ctypes (1.0.2-6) unstable; urgency=medium
.
[ Carlos Galisteo ]
* debian/control
- Added Homepage field.
.
[ Sandro Tosi ]
* debian/control
- switch Vcs-Browser field to viewsvn
- added 'binutils' to Depends; thanks to Andreas Henriksson and Evgeni
Golov
for the analysis and solution; Closes: #509623
Checksums-Sha1:
8d1940ee488da530851f8079a0b7561260cfd452 1347 ctypes_1.0.2-6.dsc
ba7bad28da4e024309cb0f6eff93877868b3c3ac 6399 ctypes_1.0.2-6.diff.gz
94897cd4a173f7f284f496ecdd761097891d25e2 162804 python-ctypes_1.0.2-6_amd64.deb
Checksums-Sha256:
eeb6c7d3c50e2f8d88c3d877857f69e14f21578acffe32e358e8965edd595aa3 1347
ctypes_1.0.2-6.dsc
b2492d38ef5cf8ad3957172484f604bdef2a9c19b5322b2217d393c4790b0b3f 6399
ctypes_1.0.2-6.
Processed (with 1 errors): reassign 509623 to python-ctypes, reassign 509697 to python2.5, forcibly merging 509623 500926
Processing commands for cont...@bugs.debian.org: > reassign 509623 python-ctypes Bug#509623: python-ctypes misses dependency on binutils Bug reassigned from package `python2.5' to `python-ctypes'. > reassign 509697 python2.5 Bug#509697: python2.5 misses dependency on binutils Bug#500926: python-ctypes: Depend or Recommend binutils Bug reassigned from package `python-ctypes' to `python2.5'. > forcemerge 509623 500926 Bug#509623: python-ctypes misses dependency on binutils Bug#500926: python-ctypes: Depend or Recommend binutils Mismatch - only Bugs in the same package can be forcibly merged: Bug 500926 is not in the same package as 509623 > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Processed: reassign 509623 to python2.5, reassign 509697 to python-ctypes, forcibly merging 509697 500926
Processing commands for cont...@bugs.debian.org: > reassign 509623 python2.5 Bug#509623: python-ctypes misses dependency on binutils Bug reassigned from package `python-ctypes' to `python2.5'. > reassign 509697 python-ctypes Bug#509697: python2.5 misses dependency on binutils Bug reassigned from package `python2.5' to `python-ctypes'. > forcemerge 509697 500926 Bug#509697: python2.5 misses dependency on binutils Bug#500926: python-ctypes: Depend or Recommend binutils Forcibly Merged 500926 509697. > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#374644: xine-ui: ctrl/shift key press emulation implementation broken
On Fri, 2008-12-12 at 17:26 +0100, Bas Zoetekouw wrote: > Hi Ben! > > You wrote: > > > I've made a few important fixes to avoid zombie processes (an existing > > bug) and file descriptor leakage. The new version of this patch is > > below. > > Unfortunately when I gave this code some serious testing I found a race > > condition in xdg-screensaver that can leave child processes hanging > > around if the user toggles between pause and play rapidly. There also > > seems to be a bug in xprop, which it relies on, that means the > > screensaver might not be resumed when we quit. So I can't recommend > > this fix at the moment. > > How severe are these bugs? Looking at #508125 (that is the > xdg-screensaver bug you mean, right?), it doesn't look too bad. > Also #508126 doesn't look like it should be holding back the release. > > Would it be ok to apply your patch and fix #508125 and #508126 post-lenny? I don't think my patch is an improvement to xine so long as those bugs are unfixed. However, I have found quite simple fixes for them now. Ben. -- Ben Hutchings The program is absolutely right; therefore, the computer must be wrong. signature.asc Description: This is a digitally signed message part
Bug#509700: kernel: modules:padlock-aes.ko trying exception
Package: kernel Severity: critical Justification: breaks unrelated software when i try to connect by nm-applet to a wpa-encrypted router i got following failure Dec 24 16:30:56 tlap modprobe: WARNING: Error inserting padlock_aes (/lib/modules/2.6.26-1-686/kernel/drivers/crypto/padlock-aes.ko): No such device hardware: 06:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) now i can just connect to my wlan-network with kernel: 2.6.18-6-686 -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (600, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.18-6-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Processed: your mail
Processing commands for cont...@bugs.debian.org: > tag 509623 + pending Bug#509623: python-ctypes misses dependency on binutils There were no tags set. Tags added: pending > thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Processed: found 509698 in 0.11.5-1
Processing commands for cont...@bugs.debian.org: > found 509698 0.11.5-1 Bug#509698: cherokee: ldap_init implicitly converted to pointer Bug marked as found in version 0.11.5-1. > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509698: cherokee: ldap_init implicitly converted to pointer
Package: cherokee Version: 0.11.3-2 Severity: serious Tags: patch Usertags: implicit-pointer-conversion Our automated buildd log filter[1] detected a problem that is likely to cause your package to segfault on architectures where the size of a pointer is greater than the size of an integer, such as ia64 and amd64. Function `ldap_init' implicitly converted to pointer at validator_ldap.c:161 This is often due to a missing function prototype definition. For more information, see [2]. The libldap API has been updated and many functions used by the ldap plugin are now deprecated. This package should either update to the new API or define LDAP_DEPRECATED to continue using the deprecated interfaces. This patch implements the lazy solution. Though it is guaranteed that this codepath will cause a segfault on certain architectures, it is not guaranteed that this codepath would ever be executed (e.g., if the returned pointer is never dereferenced). However, this bug does prevent the ia64 buildd from successfully building this package, resulting in a practical FTBFS issue and warranting the serious severity. (oh, and hi Gunnar!) [1] http://people.debian.org/~dannf/check-implicit-pointer-functions [2] http://wiki.debian.org/ImplicitPointerConversions -- dann frazier diff -urpN cherokee-0.11.5.orig/cherokee/validator_ldap.h cherokee-0.11.5/cherokee/validator_ldap.h --- cherokee-0.11.5.orig/cherokee/validator_ldap.h 2008-12-18 08:17:53.0 -0700 +++ cherokee-0.11.5/cherokee/validator_ldap.h 2008-12-24 15:44:56.0 -0700 @@ -27,6 +27,7 @@ #include "common.h" +#define LDAP_DEPRECATED 1 #include "ldap.h" #include "validator.h"
Bug#509623: it's a python-ctypes issue :(
reassign 509623 python-ctypes 1.0.2-5 retitle 509623 python-ctypes misses dependency on binutils clone 509623 -1 reassign -1 python2.5 2.5.2-14 retitle -1 python2.5 misses dependency on binutils python-ctypes/python2.5 uses objdump in ctypes/util.py but does not declare a dependency on binutils, which contains objdump. This leads to the fact, that one can't load libs when binutils are not installed (see #509623, #453287). Regards Evgeni pgpB0dHFIYugj.pgp Description: PGP signature
Processed (with 5 errors): it's a python-ctypes issue :(
Processing commands for cont...@bugs.debian.org: > reassign 509623 python-ctypes 1.0.2-5 Bug#509623: fretsonfire does not start Bug reassigned from package `fretsonfire' to `python-ctypes'. > retitle 509623 python-ctypes misses dependency on binutils Bug#509623: fretsonfire does not start Changed Bug title to `python-ctypes misses dependency on binutils' from `fretsonfire does not start'. > clone 509623 -1 Bug#509623: python-ctypes misses dependency on binutils Bug 509623 cloned as bug 509697. > reassign -1 python2.5 2.5.2-14 Bug#509697: python-ctypes misses dependency on binutils Bug reassigned from package `python-ctypes' to `python2.5'. > retitle -1 python2.5 misses dependency on binutils Bug#509697: python-ctypes misses dependency on binutils Changed Bug title to `python2.5 misses dependency on binutils' from `python-ctypes misses dependency on binutils'. > python-ctypes/python2.5 uses objdump in ctypes/util.py but does not Unknown command or malformed arguments to command. > declare a dependency on binutils, which contains objdump. Unknown command or malformed arguments to command. > This leads to the fact, that one can't load libs when binutils are not Unknown command or malformed arguments to command. > installed (see #509623, #453287). Unknown command or malformed arguments to command. > Regards Unknown command or malformed arguments to command. Too many unknown commands, stopping here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509623: fretsonfire does not start
On Wed, 24 Dec 2008 23:12:35 +0100 Evgeni Golov wrote: > Hey, > > On Tue, 23 Dec 2008 22:32:17 +0100 Joachim Zobel wrote: > > > I have just apt-get installed fretsonfire on an amd64 lenny system (with > > nvidia proprietary OpenGl) and it refuses to start: > > Can you install "libgl1-mesa-dev" and test if it works then? Mh, just tested in a VM, installing "binutils" should be enough. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#506353: lenny removal requests
Hi
"Gabor FUNK" writes:
>> mailscanner #506353
>> The maintainer Simon Walter writes:
>>In the current state the package should not be part of
>>the lenny release.
>>I'm in no position to fix all this. I'm not familiar enough with
>>the MailScanner sourcecode and I'm not able to test the changes I
>>would have to make, in particular to all the virusscanner scripts.
>> upstream apparently does not seem to, let's say, consider the tempfile
>> vulnerability a bug and does not seem to want to fix it.
>
> The mailscanner temp vulnerability seems to be fixed in upstream:
Yes, upstream has fixed the vulnerability, but not yet release a
stable (non-beta) version. Next stable release will be on 01.01.09 but
this release will also come with quite some features.
Noah Meyerhans from seacurity-team and I have been working on a
backport of the upstream fixes for mailscanner-4.68.8.
Current state of this work is: It works (MailScanner starts and scans
a simple textmail) but it's not well tested. There still need to be
done some testing with TNEF attachment, virus removal and some other
cases.
I currently don't Know when I will have the time to do this.
I have attached the diff against 4.68.8 debian package.
--
Regards
Simon Walter
diff -Naur mailscanner-4.68.8/debian/changelog mailscanner-4.68.8-1+lenny1-proposed/debian/changelog
--- mailscanner-4.68.8/debian/changelog 2008-12-24 23:29:01.0 +0100
+++ mailscanner-4.68.8-1+lenny1-proposed/debian/changelog 2008-12-24 23:27:44.0 +0100
@@ -1,3 +1,11 @@
+mailscanner (4.68.8-1+lenny1) testing-proposed-updates; urgency=high
+
+ * Security upload to fix CVE-2008-5140, CVE-2008-5312, CVE-2008-5312
+(insecure creation of files in /tmp)
+Thanks Raphael Geisser, Noah Meyerhans
+
+ -- Simon Walter Mon, 22 Dec 2008 19:43:05 +0100
+
mailscanner (4.68.8-1) unstable; urgency=low
* New upstream release
diff -Naur mailscanner-4.68.8/debian/mailscanner.install mailscanner-4.68.8-1+lenny1-proposed/debian/mailscanner.install
--- mailscanner-4.68.8/debian/mailscanner.install 2008-12-24 23:29:01.0 +0100
+++ mailscanner-4.68.8-1+lenny1-proposed/debian/mailscanner.install 2008-12-24 23:27:44.0 +0100
@@ -2,6 +2,7 @@
bin/df2mbox usr/sbin/
bin/upgrade_MailScanner_conf usr/sbin/
bin/MailScanner /usr/sbin
+bin/mailscanner_create_locks /usr/sbin
bin/update_virus_scanners /usr/sbin
bin/update_phishing_sites /usr/sbin
lib/MailScanner.pm usr/share/MailScanner/
diff -Naur mailscanner-4.68.8/debian/patches/00list mailscanner-4.68.8-1+lenny1-proposed/debian/patches/00list
--- mailscanner-4.68.8/debian/patches/00list 2008-12-24 23:29:01.0 +0100
+++ mailscanner-4.68.8-1+lenny1-proposed/debian/patches/00list 2008-12-24 23:27:43.0 +0100
@@ -10,3 +10,4 @@
update_virus_scanners.dpatch
upgrade-manpage.dpatch
use_spamassassinprefsconf.dpatch
+CVE-2008-5313.dpatch
diff -Naur mailscanner-4.68.8/debian/patches/CVE-2008-5313.dpatch mailscanner-4.68.8-1+lenny1-proposed/debian/patches/CVE-2008-5313.dpatch
--- mailscanner-4.68.8/debian/patches/CVE-2008-5313.dpatch 1970-01-01 01:00:00.0 +0100
+++ mailscanner-4.68.8-1+lenny1-proposed/debian/patches/CVE-2008-5313.dpatch 2008-12-24 23:27:43.0 +0100
@@ -0,0 +1,1335 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## CVE-2008-5313.dpatch by
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: No description.
+
+...@dpatch@
+diff -urNad mailscanner-4.68.8~/bin/MailScanner mailscanner-4.68.8/bin/MailScanner
+--- mailscanner-4.68.8~/bin/MailScanner 2008-12-22 22:48:13.0 +0100
mailscanner-4.68.8/bin/MailScanner 2008-12-22 22:48:14.0 +0100
+@@ -61,6 +61,7 @@
+ use FileHandle;
+ use File::Path;
+ use IO::Handle;
++use IO::File;
+ use Getopt::Long;
+ use Time::HiRes qw ( time );
+ use Filesys::Df;
+@@ -362,6 +363,18 @@
+ " checking configuration...\n";
+ MailScanner::Log::Configure($logbanner, 'stderr');
+
++ # Check -autoupdate lock files
++ my $lockdir = MailScanner::Config::QuickPeek($ConfFile, 'lockfiledir');
++ if ($lockdir eq "" || $lockdir =~ /tmp$/i) {
++print STDERR "Please move your \"Lockfile Dir\" setting in MailScanner.conf.\n";
++print STDERR "It should point outside /tmp, preferably /var/spool/MailScanner/incoming/Locks\n";
++ }
++ my $cluid = MailScanner::Config::QuickPeek($ConfFile, 'runasuser');
++ my $clgid = MailScanner::Config::QuickPeek($ConfFile, 'runasgroup');
++ my $clr = system("/usr/sbin/mailscanner_create_locks \"$lockdir\" \"$cluid\" \"$clgid\"");
++ print STDERR "Error: Attempt to create locks in $lockdir failed!\n"
++if ($clr>>8) != 0;
++
+ # Read the directory containing all the custom code
+ MailScanner::Config::initialise(MailScanner::Config::QuickPeek($ConfFile,
+ 'customfunctionsdir'));
+@@ -446,6 +459,12 @@
+}
+ }
+
++ # Check permissions on /tmp
++ if ($WantLintOnly) {
++my $handle = IO::
Bug#509633: pidgin crashes randomly
On Wed, 2008-12-24 at 17:33, Ari Pollak wrote: > What's the output of "gconftool -R /system/gstreamer/0.10/default"? gconftool -R /system/gstreamer/0.10/default videosink = autovideosink chataudiosink = pulsesink musicaudiosink_description = PulseAudio Sound Server audiosrc = pulsesrc videosrc = v4l2src audiosink = pulsesink musicaudiosink = pulsesink visualization = goom audiosink_description = PulseAudio Sound Server chataudiosink_description = PulseAudio Sound Server audiosrc_description = PulseAudio Sound Server > Also, could you try the version of pidgin from experimental? Sorry, I can't. I'm using workstation for everyday work and don't want to make it "too unstable" using packages from experimental/ > Milan P. Stanic wrote: > > On Wed, 2008-12-24 at 15:59, Ari Pollak wrote: > >> Do you have an plugins loaded? What happens if you disable sounds > >> completely? > > I tested it more and it seems that it works when the sounds is set to > > "No Sounds" or ALSA. It crashes or freezes when the sounds is set to > > Automatic. -- Kind regards, Milan -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509633: pidgin crashes randomly
What's the output of "gconftool -R /system/gstreamer/0.10/default"? Also, could you try the version of pidgin from experimental? Milan P. Stanic wrote: > On Wed, 2008-12-24 at 15:59, Ari Pollak wrote: >> Do you have an plugins loaded? What happens if you disable sounds >> completely? > > I tested it more and it seems that it works when the sounds is set to > "No Sounds" or ALSA. It crashes or freezes when the sounds is set to > Automatic. > -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509623: fretsonfire GL problems.
Hello! Do you have binutils installed? If not, could you please install it and see if it fixes the problem with frets on fire? https://bugs.launchpad.net/ubuntu/+source/keyjnote/+bug/211962 seems to suggest you need objdump for python-opengl to work. (Btw, there are more packages suffering from the same python-opengl problem, c.f. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=453287 ) -- Regards, Andreas Henriksson -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509623: fretsonfire does not start
Hey, On Tue, 23 Dec 2008 22:32:17 +0100 Joachim Zobel wrote: > I have just apt-get installed fretsonfire on an amd64 lenny system (with > nvidia proprietary OpenGl) and it refuses to start: Can you install "libgl1-mesa-dev" and test if it works then? Regards Evgeni pgpdLoPY3u4T4.pgp Description: PGP signature
Bug#509633: pidgin crashes randomly
On Wed, 2008-12-24 at 15:59, Ari Pollak wrote: > Do you have an plugins loaded? What happens if you disable sounds > completely? I tested it more and it seems that it works when the sounds is set to "No Sounds" or ALSA. It crashes or freezes when the sounds is set to Automatic. -- Kind regards, Milan -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509633: pidgin crashes randomly
On Wed, 2008-12-24 at 15:59, Ari Pollak wrote: > Do you have an plugins loaded? Yes. Album Conversation Colors Extended Preferences Gufications History Last Seen Message Notification Pidgin-Encryption Separate And Tab I disabled all for debuging now. > What happens if you disable sounds completely? I disabled sounds and it worked. When I set again sounds to automatic it freezes with next lines in gdb window: Starting program: /usr/bin/pidgin [Thread debugging using libthread_db enabled] [New Thread 0xb715f8c0 (LWP 1455)] [New Thread 0xb468fb90 (LWP 1483)] [New Thread 0xb3c71b90 (LWP 1484)] [New Thread 0xb3270b90 (LWP 1485)] [New Thread 0xb286fb90 (LWP 1486)] (pidgin:1455): GStreamer-CRITICAL **: Trying to dispose element play, but it is not in the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. (pidgin:1455): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:1455): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed (pidgin:1455): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:1455): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed (pidgin:1455): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:1455): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed [New Thread 0xb1e6eb90 (LWP 1487)] [New Thread 0xb146db90 (LWP 1488)] [New Thread 0xb0a6cb90 (LWP 1489)] (pidgin:1455): GStreamer-CRITICAL **: Trying to dispose element play, but it is not in the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. (pidgin:1455): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:1455): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed [Thread 0xb468fb90 (LWP 1483) exited] [New Thread 0xb468fb90 (LWP 1490)] [New Thread 0xb006bb90 (LWP 1491)] [New Thread 0xaf66ab90 (LWP 1492)] [New Thread 0xaec69b90 (LWP 1493)] [Thread 0xaec69b90 (LWP 1493) exited] [Thread 0xb468fb90 (LWP 1490) exited] [New Thread 0xb468fb90 (LWP 1494)] [New Thread 0xaec69b90 (LWP 1495)] [New Thread 0xae268b90 (LWP 1496)] [New Thread 0xad867b90 (LWP 1497)] (pidgin:1455): GStreamer-CRITICAL **: Trying to dispose element play, but it is not in the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. (pidgin:1455): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:1455): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed (pidgin:1455): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:1455): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed (pidgin:1455): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:1455): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed [Thread 0xb468fb90 (LWP 1494) exited] [New Thread 0xb468fb90 (LWP 1498)] [New Thread 0xace66b90 (LWP 1499)] [New Thread 0xac465b90 (LWP 1500)] [New Thread 0xaba64b90 (LWP 1501)] (pidgin:1455): GStreamer-CRITICAL **: Trying to dispose element fakesink, but it is not in the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. [Thread 0xb468fb90 (LWP 1498) exited] [Thread 0xaba64b90 (LWP 1501) exited] [New Thread 0xaba64b90 (LWP 1502)] [New Thread 0xb468fb90 (LWP 1503)] [New Thread 0xab063b90 (LWP 1504)] [New Thread 0xaa662b90 (LWP 1505)] (pidgin:1455): GStreamer-CRITICAL **: Trying to dispose element play, but it is not in the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. (pidgin:1455): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:1455): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed (pidgin:1455): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:1455): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed (pidgin:1455): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:1455): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed [Thread 0xaba64b90 (LWP 1502) exited] [New Thread 0xaba64
Bug#509691: Playing a game with compiz enabled, freezes Debian and needs a full restart!
Package: compiz Version: 0.7.6-7 Severity: grave Justification: renders package unusable I don't have this problem with Compiz when I am not running a game and I don't have this problem when Compiz is disabled and I am playing a game. However, when I turn on Compiz and then choose to play a game, at about 5 minutes into my gameplay, Debian freezes and am forced to reboot the computer manually. I use the ATI RADEON X600 PRO video/graphics card with the 'radeon' driver. If it matters, I play open source games such as Nexuiz, OpenArena, etc. Video card: de...@debian:~$ lspci | grep -i vga 01:00.0 VGA compatible controller: ATI Technologies Inc RV380 0x3e50 [Radeon X600] de...@debian:~$ Video card's driver: de...@debian:~$ grep drivers /var/log/Xorg.0.log (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so de...@debian:~$ -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages compiz depends on: ii compiz-core 0.7.6-7OpenGL window and compositing mana ii compiz-gnome 0.7.6-7OpenGL window and compositing mana ii compiz-gtk0.7.6-7OpenGL window and compositing mana ii compiz-plugins0.7.6-7OpenGL window and compositing mana compiz recommends no packages. Versions of packages compiz suggests: ii compizconfig-settings-manager 0.7.6-3Compizconfig Settings Manager -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509633: pidgin crashes randomly
Do you have an plugins loaded? What happens if you disable sounds completely? -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509633: pidgin crashes randomly
On Tue, 2008-12-23 at 17:32, Ari Pollak wrote: > You'll have to include some more information or this bug report is > useless. Can you get a backtrace of the crash as described here: > http://wiki.debian.org/HowToGetABacktrace (you can skip to the "Running > gdb" section after installing the pidgin-dbg package) > Also, do you have any plugins loaded? I did that, but now under gdb pidgin just freeze. Here are last lines from gdb: -- (pidgin:30791): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:30791): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed [Thread 0xa24d7b90 (LWP 30898) exited] [New Thread 0xa24d7b90 (LWP 30904)] [New Thread 0x8b2b2b90 (LWP 30905)] [New Thread 0x8a8b1b90 (LWP 30906)] [New Thread 0x89eb0b90 (LWP 30907)] (pidgin:30791): GStreamer-CRITICAL **: Trying to dispose element fakesink, but it is not in the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. [Thread 0x89eb0b90 (LWP 30907) exited] [Thread 0xa24d7b90 (LWP 30904) exited] [New Thread 0xa24d7b90 (LWP 30908)] [New Thread 0x89eb0b90 (LWP 30909)] [New Thread 0x894afb90 (LWP 30910)] [New Thread 0x88aaeb90 (LWP 30911)] (pidgin:30791): GStreamer-CRITICAL **: Trying to dispose element play, but it is not in the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. (pidgin:30791): GStreamer-CRITICAL **: gst_element_set_state: assertion `GST_IS_ELEMENT (element)' failed (pidgin:30791): GStreamer-CRITICAL **: gst_object_unref: assertion `((GObject *) object)->ref_count > 0' failed [Thread 0xa24d7b90 (LWP 30908) exited] -- -- Kind regards, Milan -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#507764: svn merge reverts previous merges
[Ben Hutchings] > It turned out to be fairly easy to backport the upstream changes. > Here's the patch: Thanks for tracking this down and backporting it, Ben. I hope I'll have time to make an upload in a couple of days. (Like much of the world, I'm out of town today and tomorrow.) > A couple of Java tests fail but this appears to be expected. Yeah, that's been true since the beginning of time. Maybe if I switch to openjdk (as Ubuntu did already) that'll help. -- Peter Samuelson | org-tld!p12n!peter | http://p12n.org/ -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#508680: Splashy missing default theme with desktop-base
Package: desktop-base Version: 5.0.3 Followup-For: Bug #508680 Splashy version: 0.3.10-2.1 I still have what I believe to be the same problem. If I reconfigure desktop-base I get: Splashy ERROR: Setting XML file to <> failed. XML File not found >Set theme as: moreblue-orbit [ FAIL ] In /etc/splashy/themes: $ ls crux debian4debian-moreblue kubuntusplashy debian3 debian-cubism debiansplashyubuntusplashy $ sudo dpkg-reconfigure splashy update-initramfs: Generating /boot/initrd.img-2.6.26-1-amd64 Splashy ERROR: Setting XML file to <> failed. XML File not found Splashy ERROR: Setting XML file to <> failed. XML File not found cp: cannot stat `/etc/splashy/themes/default': No such file or directory -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (900, 'testing'), (800, 'unstable'), (700, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages desktop-base depends on: ii librsvg2-common 2.22.2-2 SAX-based renderer library for SVG desktop-base recommends no packages. Versions of packages desktop-base suggests: ii kde 5:48 the K Desktop Environment official -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509686: [CVE-2008-5558] remote crash of asterisk with realtime IAX2 users/peers
Package: asterisk Version: 1:1.2.13~dfsg-2etch3 Severity: grave Tags: pending security etch There is a possibility to remotely crash an Asterisk server if the server is configured to use realtime IAX2 users. The issue occurs if either an unknown user attempts to authenticate or if a user that uses hostname matching attempts to authenticate. http://downloads.digium.com/pub/asa/AST-2008-012.html The advisory mentions that the issue is for versions 1.2.26 - 1.2.30.3 , however it was introduced in a previous bugfix that has already been included in Debian, specifically in AST-2007-027.dpatch that was added in 1:1.2.13~dfsg-2etch3 . I included this patch in http://svn.debian.org/viewsvn/pkg-voip?rev=6581&view=rev -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Processed: tagging 478717
Processing commands for cont...@bugs.debian.org: > # Automatically generated email from bts, devscripts version 2.9.26etch1 > tags 478717 + pending Bug#478717: ruby1.9: FTBFS on hppa: make[1]: *** [all] Segmentation fault Tags were: pending Bug#491930: ruby1.9: needs a removal-transition on hppa Tags added: pending > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509681: [mysql-server] install FAILED, using aptitude: w/ [ERROR] /usr/sbin/mysqld: unknown option '--skip-federated'
Package: mysql-server Version: 5.0.51a-19 Severity: serious --- Please enter the report below this line. --- I tried twice to install, no luck. ocelot:/home/john# aptitude -vVf install mysql-server Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Reading task descriptions... Done The following partially installed packages will be configured: mysql-server mysql-server-5.0 0 packages upgraded, 0 newly installed, 0 to remove and 51 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Writing extended state information... Done Setting up mysql-server-5.0 (5.0.51a-19) ... Stopping MySQL database server: mysqld. 081224 11:38:54 [ERROR] /usr/sbin/mysqld: unknown option '--skip-federated' Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed! invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up mysql-server-5.0 (5.0.51a-19) ... Stopping MySQL database server: mysqld. Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed! invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Reading task descriptions... Done Current status: 0 broken [+0], 51 updates [+0], 5268 new [+0]. ocelot:/home/john# ocelot:/home/john# uname -a Linux ocelot 2.6.27.7-hou2.2-02.jmc64 #1 SMP Tue Nov 25 09:21:12 CST 2008 x86_64 GNU/Linux ocelot:/home/john# Then I tried this: ocelot:/home/john# dpkg-reconfigure mysql-server-5.0 /usr/sbin/dpkg-reconfigure: mysql-server-5.0 is broken or not fully installed ocelot:/home/john# Thanks, John --- System information. --- Architecture: amd64 Kernel: Linux 2.6.27.7-hou2.2-02.jmc64 Debian Release: 5.0 990 testing www.debian-multimedia.org 990 testing security.debian.org 990 testing ftp.us.debian.org 500 unstableftp.us.debian.org 500 testing-proposed-updates ftp.us.debian.org 500 stable security.debian.org 500 stable http.us.debian.org 500 stable ftp.us.debian.org 500 proposed-updates http.us.debian.org --- Package information. --- Depends (Version) | Installed ===-+-=== mysql-server-5.0| 5.0.51a-19 -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Processed: tagging 478717
Processing commands for cont...@bugs.debian.org: > # Automatically generated email from bts, devscripts version 2.9.26etch1 > tags 478717 + pending Bug#478717: ruby1.9: FTBFS on hppa: make[1]: *** [all] Segmentation fault Tags were: pending Bug#491930: ruby1.9: needs a removal-transition on hppa Tags added: pending > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#503739: marked as done (wicd: Missing many dependencies)
Your message dated Wed, 24 Dec 2008 17:02:03 + with message-id and subject line Bug#503739: fixed in wicd 1.5.7-1 has caused the Debian Bug report #503739, regarding wicd: Missing many dependencies to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 503739: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=503739 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: wicd Version: 1.5.2-1 Severity: grave Justification: renders package unusable wicd needs dependencies on some of the external tools it uses. In particular, it should have a dependency on dhcpcd | dhcp3-client | pump, a dependency on net-tools | ethtool, and a dependency on net-tools | iproute. In theory, wicd could operate without a DHCP client if you used it with static address information only. Similarly, wicd could operate without a wired link detection mechanism. Thus, you could choose to make them Recommends. However, almost all users of wicd likely want this functionality; I'd personally argue for Depends. - Josh Triplett -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.27-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages wicd depends on: ii python2.5.2-2An interactive high-level object-o ii python-dbus 0.83.0-1 simple interprocess messaging syst ii python-glade2 2.12.1-6 GTK+ bindings: Glade support ii python-gtk2 2.12.1-6 Python bindings for the GTK+ widge ii python-support0.8.6 automated rebuilding support for P ii wireless-tools29-1.1 Tools for manipulating Linux Wirel ii wpasupplicant 0.6.4-2Client support for WPA and WPA2 (I wicd recommends no packages. wicd suggests no packages. -- no debconf information --- End Message --- --- Begin Message --- Source: wicd Source-Version: 1.5.7-1 We believe that the bug you reported is fixed in the latest version of wicd, which is due to be installed in the Debian FTP archive: wicd_1.5.7-1.diff.gz to pool/main/w/wicd/wicd_1.5.7-1.diff.gz wicd_1.5.7-1.dsc to pool/main/w/wicd/wicd_1.5.7-1.dsc wicd_1.5.7-1_all.deb to pool/main/w/wicd/wicd_1.5.7-1_all.deb wicd_1.5.7.orig.tar.gz to pool/main/w/wicd/wicd_1.5.7.orig.tar.gz A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 503...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. David Paleino (supplier of updated wicd package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Wed, 24 Dec 2008 17:37:13 +0100 Source: wicd Binary: wicd Architecture: source all Version: 1.5.7-1 Distribution: unstable Urgency: low Maintainer: Python Applications Packaging Team Changed-By: David Paleino Description: wicd - wired and wireless network manager Closes: 503737 503739 503747 503749 509051 Changes: wicd (1.5.7-1) unstable; urgency=low . * New upstream release (Closes: #503737) * debian/control: - added some runtime dependencies (not really, but used by most users) to wicd (Closes: #503739) - added Conflicts: network-manager (Closes: #509051) - added Suggests on pm-utils, since we now also have those functionalities - update Vcs-* and Maintainer fields to reflect injection into PAPT * debian/postrm added: - removes runtime-generated files (Closes: #503747) * debian/patches: - 02-fix_logfile_perms.patch added, sets permissions of /var/log/wicd/wicd.log to root:adm (Closes: #503749) - 03-fix_lintian_manpage_warning.patch added, gives a more meaningful whatis entry * debian/rules: - get-orig-source target to ease upstream tarball fetch - ensure right permissions are set in install target - using dh7-style rules * debian/README.source added * debian/docs removed * debian/copyright fixed: - added copyright year to in/man* - removed useless escaping of '=' in filenames - fixed pointer to GPL-2 Checksums-Sha1:
Bug#503747: marked as done (wicd: Leaves files behind when purged)
Your message dated Wed, 24 Dec 2008 17:02:03 + with message-id and subject line Bug#503747: fixed in wicd 1.5.7-1 has caused the Debian Bug report #503747, regarding wicd: Leaves files behind when purged to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 503747: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=503747 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: wicd Version: 1.5.2-1 Severity: serious Justification: Policy 10.8 and others I purged wicd, and it left behind various files: $ tree /etc/wicd /var/lib/wicd /var/log/wicd /etc/wicd |-- manager-settings.conf |-- wired-settings.conf `-- wireless-settings.conf /var/lib/wicd `-- configurations `-- [file named with my router's MAC address] /var/log/wicd `-- wicd.log 1 directory, 5 files - Josh Triplett -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.27-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages wicd depends on: ii python2.5.2-2An interactive high-level object-o ii python-dbus 0.83.0-1 simple interprocess messaging syst ii python-glade2 2.12.1-6 GTK+ bindings: Glade support ii python-gtk2 2.12.1-6 Python bindings for the GTK+ widge ii python-support0.8.6 automated rebuilding support for P ii wireless-tools29-1.1 Tools for manipulating Linux Wirel ii wpasupplicant 0.6.4-2Client support for WPA and WPA2 (I wicd recommends no packages. wicd suggests no packages. --- End Message --- --- Begin Message --- Source: wicd Source-Version: 1.5.7-1 We believe that the bug you reported is fixed in the latest version of wicd, which is due to be installed in the Debian FTP archive: wicd_1.5.7-1.diff.gz to pool/main/w/wicd/wicd_1.5.7-1.diff.gz wicd_1.5.7-1.dsc to pool/main/w/wicd/wicd_1.5.7-1.dsc wicd_1.5.7-1_all.deb to pool/main/w/wicd/wicd_1.5.7-1_all.deb wicd_1.5.7.orig.tar.gz to pool/main/w/wicd/wicd_1.5.7.orig.tar.gz A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 503...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. David Paleino (supplier of updated wicd package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Wed, 24 Dec 2008 17:37:13 +0100 Source: wicd Binary: wicd Architecture: source all Version: 1.5.7-1 Distribution: unstable Urgency: low Maintainer: Python Applications Packaging Team Changed-By: David Paleino Description: wicd - wired and wireless network manager Closes: 503737 503739 503747 503749 509051 Changes: wicd (1.5.7-1) unstable; urgency=low . * New upstream release (Closes: #503737) * debian/control: - added some runtime dependencies (not really, but used by most users) to wicd (Closes: #503739) - added Conflicts: network-manager (Closes: #509051) - added Suggests on pm-utils, since we now also have those functionalities - update Vcs-* and Maintainer fields to reflect injection into PAPT * debian/postrm added: - removes runtime-generated files (Closes: #503747) * debian/patches: - 02-fix_logfile_perms.patch added, sets permissions of /var/log/wicd/wicd.log to root:adm (Closes: #503749) - 03-fix_lintian_manpage_warning.patch added, gives a more meaningful whatis entry * debian/rules: - get-orig-source target to ease upstream tarball fetch - ensure right permissions are set in install target - using dh7-style rules * debian/README.source added * debian/docs removed * debian/copyright fixed: - added copyright year to in/man* - removed useless escaping of '=' in filenames - fixed pointer to GPL-2 Checksums-Sha1: c0ef1943a5ac770176bfa1175afdbbc0fec31fc4 1240 wicd_1.5.7-1.dsc 33d3bd2e1d61f6ded1aee6d167fe56df541ace29 238856 wicd_1.5.7.orig.tar.gz 22073803eb8e7d03cccad618cfe892400b04de48 7745 wicd_1.5.7-1.diff.gz 2c0857a7a1ae5c14aee5cb036b162a4f3eaa0c0a 233726
Bug#506353: lenny removal requests
I'm forwarding this I got from Julian (mailscanner upstream). G. - Original Message - From: "Julian Field" To: "Gabor FUNK" Sent: Wednesday, December 24, 2008 3:27 PM Subject: Re: Bug#506353: lenny removal requests The vulnerabilities in MailScanner have all been fixed. On 24/12/08 10:20, Gabor FUNK wrote: so here are three RC bugs with maintainers clearly indicating that they don't want the buggy packages to release and none look like they will be fixed. The package do not have reverse dependencies, so they seem to be good for removal. mailscanner #506353 The maintainer Simon Walter writes: In the current state the package should not be part of the lenny release. I'm in no position to fix all this. I'm not familiar enough with the MailScanner sourcecode and I'm not able to test the changes I would have to make, in particular to all the virusscanner scripts. upstream apparently does not seem to, let's say, consider the tempfile vulnerability a bug and does not seem to want to fix it. The mailscanner temp vulnerability seems to be fixed in upstream: --- http://www.mailscanner.info/ChangeLog 18/12/2008 New in Version 4.74.11-1 ... * Fixes * 2 Major work on removing symlink attack vulnerabilities affecting -autoupdate lock files. Note: This vulnerability only affected systems where normal interactive users could log in to the system, or create arbitrary symlinks in your filesystem. So the ISP-style setups were never vulnerable, as they didn't allow normal users to login or allow people to arbitrarily create symlinks in the filesystem. 2 Removed symlink attack vulnerabilities in SpamAssassin --- Or are there more? G. Jules -- Julian Field MEng CITP CEng www.MailScanner.info Buy the MailScanner book at www.MailScanner.info/store MailScanner customisation, or any advanced system administration help? Contact me at ju...@jules.fm PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654 PGP public key: http://www.jules.fm/julesfm.asc -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#506652: lenny removal requests
Thomas Viehmann writes: > xml2rfc #506652 > The maintainer Florian Weimer: > This means we shouldn't release the current xml2rfc version with > lenny. Removal hint added. Should a solution to this problem become available soonish, the package should get back into lenny. > mailscanner #506353 > The maintainer Simon Walter writes: > In the current state the package should not be part of > the lenny release. > I'm in no position to fix all this. I'm not familiar enough with > the MailScanner sourcecode and I'm not able to test the changes I > would have to make, in particular to all the virusscanner scripts. > upstream apparently does not seem to, let's say, consider the tempfile > vulnerability a bug and does not seem to want to fix it. Removal hint added. FWIW, software like mailscanner, having extensive contact with possible attackers, should be maintained by someone who's able to fix security issues in a timely manner. The fact that it isn't is grounds to remove it from lenny. > helpdeco #507021 > The maintainer Paul Wise writes: > Based on the issues I found and fixed in upstream SVN last year with > the zzuf input fuzzer, I don't think the current version should be > allowed into lenny on any architecture Remova hint added. Thanks for your work, Thomas. Happy holidays, Marc -- Fachbegriffe der Informatik - Einfach erklärt 84: Psychologe neurolinguistischer Programmierer (Oliver Bandel) pgpdMvh6zJua3.pgp Description: PGP signature
Bug#509651: marked as done (Gimp (2.2): Script Causes Crash, Then Writes to Drive at ~1GB/min)
Your message dated Wed, 24 Dec 2008 10:21:02 -0500 with message-id <4952535e.7000...@debian.org> and subject line Re: Bug#509651: Gimp (2.2): Script Causes Crash, Then Writes to Drive at ~1GB/min has caused the Debian Bug report #509651, regarding Gimp (2.2): Script Causes Crash, Then Writes to Drive at ~1GB/min to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 509651: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=509651 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- package: gimp version: 2.2.13-1etch4 Severity: grave Error Messages: 1) Reflection Message - Error while executing (script-fu-gimp-reflection 1 3 30 100 FALSE TRUE) ERROR: unbound variable (errobj gimp-image-get-layer-position) 2) GIMP Message - Not enough visible layers for a merge. There must be at least two. Reflection Message - Error while executing (script-fu-gimp-reflection 1 2 30 100 FALSE TRUE) ERROR: Procedural database execution failed: (gimp_image_merge_visible_layers 1 0) Procedure to Reveal Bug: 0) Place gimp-reflection.scm in the /usr/share/gimp/2.0/scripts directory 1) Open Gimp 2) Close "GIMP Tip of the Day" window 3) Open Recent Single Layer Image File (jpg or psd) 4) Click Layer > Duplicate Layer 5) Click Filters > Decor > Reflection 6) Leave Defaults and Click "OK" on new window 7) Click "OK" when error message (1) pops up 8) Click Edit > Undo History 9) Watch Hard Drive Space Impersonate Evidence for WMD's Description: When the program first froze, I initially minimized it to see if it would recover on it's own. I didn't realize other systems were being affected until I tried to save a file in gnumeric and was given an out of space error message. I proceded to terminate gimp with the 'xkill' command. After running 'ps -ax', I noticed additional references to gimp, so i used 'kill -9' to terminate those processes with gimp in the name. At least one would not die. I think it said '[gimp 2.2] '. I tried to logout then login. I tried to reboot. I tried to reboot and force an fsck (shutdown -F -r now). After running once, fsck reported some 'failure', automatically rebooted and checked the 200GB partition a second time. The second time it finished without errors and proceeded with the boot process. I was able to repeat this bug numerous times on my system. I have not been able to recover the hard drive space that disappears. I checked the usual suspects (/var, /tmp, and .profile directories). I'm running fluxbox, so I don't have a trash icon. I have not modified any partitions in years. I spent hours researching a possible cause/solution. The malfunctions I found that cause mildly similar symptoms are a decompression bomb, or disk blocks still in use by a deleted file. Trouble-shooting problems like this is well beyond my skill level. Just in case, here are the links: http://www.aerasec.de/security/advisories/decompression-bomb-vulnerability.html) http://forums.whirlpool.net.au/forum-replies-archive.cfm/699252.html Also of note is my system is now missing hard drive space (over 10GB). While running 'df', I noticed that 'used' + 'available' does not equal the total '1-k blocks'. I'm not positive that this discrepancy wasn't there before gimp crashed the first time, but I first noticed the discrepancy after the crash. I was not able to repeat a similar discrepancy in later crashes. Contents of ~/.gimp-2.2/gimprc: (swap-path "/tmp") (tile-cache-size 320M) (monitor-xresolution 100.00) (monitor-yresolution 100.00) (help-browser web-browser) Depends: wget, gimp-data (= 2.2.13-1etch4), libaa1 (>= 1.2), libart-2.0-2 (>= 2.3.16), libatk1.0-0 (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo2 (>= 1.2.4), libexif12, libexpat1 (>= 1.95.8), libfontconfig1 (>= 2.4.0), libfreetype6 (>= 2.2), libgimp2.0 (>= 2.2.0+rel), libglib2.0-0 (>= 2.12.0), libgtk2.0-0 (>= 2.8.0), libice6 (>= 1:1.0.0), libjpeg62, liblcms1 (>= 1.08-1), libmng1 (>= 1.0.3-1), libpango1.0-0 (>= 1.14.8), libpng12-0 (>= 1.2.13-4), libsm6, libtiff4, libwmf0.2-7 (>= 0.2.8.4), libx11-6, libxcursor1 (>> 1.1.2), libxext6, libxfixes3 (>= 1:4.0.1), libxi6, libxinerama1, libxmu6, libxpm4, libxrandr2, libxrender1, libxt6, zlib1g (>= 1:1.2.1) System Info: Kernel Version: 2.6.18-5-686 #1 SMP Wed Oct 3 00:12:50 UTC 2007 i686 GNU/Linux Shared C Library: /lib/libc.so.6 -> libc-2.3.6.so Debian Notes: I attempted to upgrade from Sarge. The upgrade wasn't completely clean and there were two files with dependency issues. Because of this, I haven't downloaded very many software updates in months. Processor Info: processor :
Bug#508510: marked as done (Can't parse packages.debian.org output anymore)
Your message dated Wed, 24 Dec 2008 15:02:03 + with message-id and subject line Bug#508510: fixed in debget 1.6+nmu1 has caused the Debian Bug report #508510, regarding Can't parse packages.debian.org output anymore to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 508510: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508510 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: debget Version: 1.6 Severity: grave $ debget debget debget: Debian::Debget::parse_pdo_source: parse_pdo_source(): failure parsing package web page for source debget: main parse failed at /usr/share/perl5/Debian/Debget.pm line 149. Seems that it can't handle the new packages.debian.org format. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing'), (100, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages debget depends on: ii libapt-pkg-perl 0.1.22+b1 Perl interface to libapt-pkg ii libproc-waitstat-perl 1.00-4 interpret and act on wait() status ii libwww-perl 5.813-1WWW client/server library for Perl ii perl 5.10.0-18 Larry Wall's Practical Extraction ii perl-modules [libnet-perl]5.10.0-18 Core Perl modules debget recommends no packages. Versions of packages debget suggests: ii devscripts2.10.35scripts to make the life of a Debi -- no debconf information --- End Message --- --- Begin Message --- Source: debget Source-Version: 1.6+nmu1 We believe that the bug you reported is fixed in the latest version of debget, which is due to be installed in the Debian FTP archive: debget_1.6+nmu1.dsc to pool/main/d/debget/debget_1.6+nmu1.dsc debget_1.6+nmu1.tar.gz to pool/main/d/debget/debget_1.6+nmu1.tar.gz debget_1.6+nmu1_all.deb to pool/main/d/debget/debget_1.6+nmu1_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 508...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. David Paleino (supplier of updated debget package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Sun, 21 Dec 2008 13:58:43 +0100 Source: debget Binary: debget Architecture: source all Version: 1.6+nmu1 Distribution: unstable Urgency: medium Maintainer: Roderick Schertler Changed-By: David Paleino Description: debget - download/compile source and binary Debian packages Closes: 508510 Changes: debget (1.6+nmu1) unstable; urgency=medium . * Non-maintainer upload. * Support new packages.debian.org (Closes: #508510) Checksums-Sha1: 4f383491345d5c0d21eab88a6df7f819ea2d413c 721 debget_1.6+nmu1.dsc 446f87de033bbbaf0fa8f21b8917a0a4eaa9d820 19834 debget_1.6+nmu1.tar.gz 8d5ec3b56eba941a2afb8722e3ef560cf34a5983 30848 debget_1.6+nmu1_all.deb Checksums-Sha256: d2ac904bdc74449c18fb51611151ad633521ab6f3c383bc9c6b91f4e723c4361 721 debget_1.6+nmu1.dsc e7a5ce3bf1dc0339f20f0286b226b50ddf980f8bfa9701b61a55a44e1067eed4 19834 debget_1.6+nmu1.tar.gz 29d8c631c052b313ac5c00892312a1867839dc9c8b818a0a838a70fdb26bb508 30848 debget_1.6+nmu1_all.deb Files: 7e3dfaa3bd6e77abf4c212eb6685f8ae 721 utils optional debget_1.6+nmu1.dsc fde0c55e89692036180fbff985eca9e0 19834 utils optional debget_1.6+nmu1.tar.gz 215a4ff1c99bfbe4f43742db229288b9 30848 utils optional debget_1.6+nmu1_all.deb -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iD8DBQFJTkpAriZpaaIa1PkRAmltAJ9rCrqme8JpMN8gb2b6ggc+YSZzeACgvJPl /+DLP/CeEnmtPZRQGdvRxME= =54Qd -END PGP SIGNATURE- --- End Message ---
Processed: tagging 509198
Processing commands for cont...@bugs.debian.org: > tags 509198 = fixed-upstream Bug#509198: rdiff-backup: 1.2.2 fails for listattr on symlinks, raises "Too many levels of symbolic links" exception Tags were: pending Tags set to: fixed-upstream > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509355: cpufreqd: segfault while reading acpi battery info
On Tue, Dec 23, 2008 at 07:57:00PM +0100, Stefan Bühler wrote: > The problem is that check_timeout is reset after the first battery got > updated, so the values for the second battery are never read. > > This results in status->value == NULL, and strncmp segfaults. > > The solution is to update check_timeout after all battery values are updated. excellent, thanks -- mattia :wq! signature.asc Description: Digital signature
Bug#509564: marked as done (/usr/bin/shares-admin: Crash:segmentation fault)
Your message dated Wed, 24 Dec 2008 11:17:04 + with message-id and subject line Bug#509564: fixed in liboobs 2.22.0-2 has caused the Debian Bug report #509564, regarding /usr/bin/shares-admin: Crash:segmentation fault to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 509564: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=509564 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: gnome-system-tools Version: 2.22.0-3 Severity: grave Justification: renders package unusable File: /usr/bin/shares-admin *** Please type your report below this line *** Hi, since some days ago, shares-admin chrashes everytime I try to start it and I find this error inside messages log: shares-admin[3592]: segfault at 0 ip b79e8d1a sp bf982520 error 4 in liboobs-1.so.4.0.0[b79d6000+23000]. When I start it from a terminal I get these two messages: Gtk-WARNING **: Unknown property: GtkComboBox.items after starting shares-admin, and Segmentation fault after its crash. I hope my quite bad english does not interfer with your work :) -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gnome-system-tools depends on: ii gconf22.22.0-1 GNOME configuration database syste ii gksu 2.0.0-6graphical frontend to su ii libatk1.0-0 1.22.0-1 The ATK accessibility toolkit ii libc6 2.7-16 GNU C Library: Shared libraries ii libcairo2 1.6.4-7The Cairo 2D vector graphics libra ii libdbus-1-3 1.2.1-4simple interprocess messaging syst ii libgconf2-4 2.22.0-1 GNOME configuration database syste ii libglib2.0-0 2.16.6-1 The GLib library of C routines ii libgnomevfs2-01:2.22.0-5 GNOME Virtual File System (runtime ii libgtk2.0-0 2.12.11-4 The GTK+ graphical user interface ii libnautilus-extension12.20.0-7 libraries for nautilus components ii liboobs-1-4 2.22.0-1 GObject based interface to system- ii libpango1.0-0 1.20.5-3 Layout and rendering of internatio ii perl 5.10.0-18 Larry Wall's Practical Extraction ii system-tools-backends 2.6.0-2System Tools to manage computer co Versions of packages gnome-system-tools recommends: ii gnome-control-center1:2.22.2.1-2 utilities to configure the GNOME d Versions of packages gnome-system-tools suggests: pn ntp(no description available) ii samba-common 2:3.2.5-1 Samba common files used by both th pn wvdial (no description available) -- no debconf information --- End Message --- --- Begin Message --- Source: liboobs Source-Version: 2.22.0-2 We believe that the bug you reported is fixed in the latest version of liboobs, which is due to be installed in the Debian FTP archive: liboobs-1-4-dbg_2.22.0-2_amd64.deb to pool/main/libo/liboobs/liboobs-1-4-dbg_2.22.0-2_amd64.deb liboobs-1-4_2.22.0-2_amd64.deb to pool/main/libo/liboobs/liboobs-1-4_2.22.0-2_amd64.deb liboobs-1-dev_2.22.0-2_amd64.deb to pool/main/libo/liboobs/liboobs-1-dev_2.22.0-2_amd64.deb liboobs_2.22.0-2.diff.gz to pool/main/libo/liboobs/liboobs_2.22.0-2.diff.gz liboobs_2.22.0-2.dsc to pool/main/libo/liboobs/liboobs_2.22.0-2.dsc A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 509...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Josselin Mouette (supplier of updated liboobs package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Wed, 24 Dec 2008 11:23:46 +0100 Source: liboobs Binary: liboobs-1-4 liboobs-1-dev liboobs-1-4-dbg Architecture: source amd64 Version: 2.22.0-2 Distribution: unstable Urgency: low Maintainer: Loic Minier Changed-By: Josselin Mouette Description: liboobs-1-4 - GObject based interface to system-tools-backends - shared library liboob
Bug#509658: marked as done (avfs needs to depend on fuse-utils)
Your message dated Wed, 24 Dec 2008 10:47:04 + with message-id and subject line Bug#509658: fixed in avfs 0.9.8-6 has caused the Debian Bug report #509658, regarding avfs needs to depend on fuse-utils to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 509658: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=509658 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: avfs Version: 0.9.8-5 Severity: grave Justification: renders package unusable Without fuse-utils avfs can only be used by root and there is no way to unmount the filesystem after itz has been mounted. Michael -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (101, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages avfs depends on: ii libc6 2.7-16 GNU C Library: Shared libraries ii libfuse2 2.7.4-1.1 Filesystem in USErspace library avfs recommends no packages. Versions of packages avfs suggests: pn arj(no description available) pn cdparanoia (no description available) pn lha(no description available) ii p7zip-full 4.58~dfsg.1-1 7z and 7za file archivers with hig ii rpm4.4.2.3-1 Red Hat package manager ii unzip 5.52-12 De-archiver for .zip files ii wget 1.11.4-2 retrieves files from the web ii zip2.32-1Archiver for .zip files ii zoo2.10-21 manipulate zoo archives -- no debconf information --- End Message --- --- Begin Message --- Source: avfs Source-Version: 0.9.8-6 We believe that the bug you reported is fixed in the latest version of avfs, which is due to be installed in the Debian FTP archive: avfs_0.9.8-6.diff.gz to pool/main/a/avfs/avfs_0.9.8-6.diff.gz avfs_0.9.8-6.dsc to pool/main/a/avfs/avfs_0.9.8-6.dsc avfs_0.9.8-6_i386.deb to pool/main/a/avfs/avfs_0.9.8-6_i386.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 509...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Michael Meskes (supplier of updated avfs package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Wed, 24 Dec 2008 11:08:52 +0100 Source: avfs Binary: avfs Architecture: source i386 Version: 0.9.8-6 Distribution: unstable Urgency: high Maintainer: Michael Meskes Changed-By: Michael Meskes Description: avfs - virtual filesystem to access archives, disk images, remote locati Closes: 509658 Changes: avfs (0.9.8-6) unstable; urgency=high . * Added dependency to fuse-utils, closes: #509658 Checksums-Sha1: 3586d6e9b9391ebb534f7a3a70505c77617fc109 962 avfs_0.9.8-6.dsc 259d9a29f33b2d343f0f0c5493b0bf640f66747a 6171 avfs_0.9.8-6.diff.gz 96d020f1ec5303ff3b30a1f72f3a08f30cb680f2 182826 avfs_0.9.8-6_i386.deb Checksums-Sha256: 7628810e37bc2b99e0b7a14e324385dbcc7ba281d79d233c92d5b0c440c33f83 962 avfs_0.9.8-6.dsc 3ecb62b619926170149eb65114978fc4a57ec55e276df8787ad4be3b60f46c1f 6171 avfs_0.9.8-6.diff.gz 9214d684c12fc602ffb13ea0ffe503d38354d8e0723836c70c9d985f6ae26221 182826 avfs_0.9.8-6_i386.deb Files: e9fd10d1a16a4f152d9be19f8d7e3b41 962 utils extra avfs_0.9.8-6.dsc b34e9bafeb445a634fd7debdaf542ab3 6171 utils extra avfs_0.9.8-6.diff.gz 973034f8b80dc24a0405d5f4ac644339 182826 utils extra avfs_0.9.8-6_i386.deb -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iD8DBQFJUg8eVkEm8inxm9ERAtwwAJ4iz9AEz7SDAAl5CZKbyPTqGxcUAACgg/VV pdAPxW2XgBUZT7Yn5Aa/8qs= =rL7r -END PGP SIGNATURE- --- End Message ---
Processed: bug 505938 is forwarded to http://bugs.mysql.com/bug.php?id=41728
Processing commands for cont...@bugs.debian.org: > # Automatically generated email from bts, devscripts version 2.9.26 > forwarded 505938 http://bugs.mysql.com/bug.php?id=41728 Bug#505938: libmyodbc: Client programs crash with linker error Noted your statement that Bug has been forwarded to http://bugs.mysql.com/bug.php?id=41728. > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#506353: lenny removal requests
so here are three RC bugs with maintainers clearly indicating that they don't want the buggy packages to release and none look like they will be fixed. The package do not have reverse dependencies, so they seem to be good for removal. mailscanner #506353 The maintainer Simon Walter writes: In the current state the package should not be part of the lenny release. I'm in no position to fix all this. I'm not familiar enough with the MailScanner sourcecode and I'm not able to test the changes I would have to make, in particular to all the virusscanner scripts. upstream apparently does not seem to, let's say, consider the tempfile vulnerability a bug and does not seem to want to fix it. The mailscanner temp vulnerability seems to be fixed in upstream: --- http://www.mailscanner.info/ChangeLog 18/12/2008 New in Version 4.74.11-1 ... * Fixes * 2 Major work on removing symlink attack vulnerabilities affecting -autoupdate lock files. Note: This vulnerability only affected systems where normal interactive users could log in to the system, or create arbitrary symlinks in your filesystem. So the ISP-style setups were never vulnerable, as they didn't allow normal users to login or allow people to arbitrarily create symlinks in the filesystem. 2 Removed symlink attack vulnerabilities in SpamAssassin --- Or are there more? G. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509658: avfs needs to depend on fuse-utils
Package: avfs Version: 0.9.8-5 Severity: grave Justification: renders package unusable Without fuse-utils avfs can only be used by root and there is no way to unmount the filesystem after itz has been mounted. Michael -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (101, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages avfs depends on: ii libc6 2.7-16 GNU C Library: Shared libraries ii libfuse2 2.7.4-1.1 Filesystem in USErspace library avfs recommends no packages. Versions of packages avfs suggests: pn arj(no description available) pn cdparanoia (no description available) pn lha(no description available) ii p7zip-full 4.58~dfsg.1-1 7z and 7za file archivers with hig ii rpm4.4.2.3-1 Red Hat package manager ii unzip 5.52-12 De-archiver for .zip files ii wget 1.11.4-2 retrieves files from the web ii zip2.32-1Archiver for .zip files ii zoo2.10-21 manipulate zoo archives -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Processed: bug 509564 is forwarded to http://bugzilla.gnome.org/show_bug.cgi?id=524792
Processing commands for cont...@bugs.debian.org: > # Automatically generated email from bts, devscripts version 2.9.26etch1 > forwarded 509564 http://bugzilla.gnome.org/show_bug.cgi?id=524792 Bug#509564: /usr/bin/shares-admin: Crash:segmentation fault Noted your statement that Bug has been forwarded to http://bugzilla.gnome.org/show_bug.cgi?id=524792. > End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509564: /usr/bin/shares-admin: Crash:segmentation fault
Ops, ok I'm stupid :( . however, this is what bt returns : #0 oobs_share_smb_new (path=0x0, name=0x891ff6c "Usbextreme Ps2 Hd Usb (Usbadvance)", comment=0x0, flags=0) at oobs-share-smb.c:339 #1 0xb79903e6 in oobs_smb_config_update (object=0x8906980) at oobs-smbconfig.c:250 #2 0xb7986603 in update_object_from_message (object=0x8906980, message=0x8a35470) at oobs-object.c:359 #3 0xb7986cbe in async_message_cb (pending_call=0x89b6218, data=0x89b0a30) at oobs-object.c:430 #4 0xb7373361 in ?? () from /usr/lib/libdbus-1.so.3 #5 0x089b6218 in ?? () #6 0x089b0a30 in ?? () #7 0xbf829e38 in ?? () #8 0xb738cff4 in ?? () from /usr/lib/libdbus-1.so.3 #9 0xb738cff4 in ?? () from /usr/lib/libdbus-1.so.3 #10 0x089b6218 in ?? () #11 0xbf829e38 in ?? () #12 0xb7362706 in ?? () from /usr/lib/libdbus-1.so.3 #13 0x089b6218 in ?? () #14 0x08a35470 in ?? () #15 0x in ?? () If you need something more, just tell me what it is :)
Bug#494408: exec-shield for recent kernels
Did you try the more recent versions of exec-shield from Fedora CVS? [1] RedHat continues to maintain the patch, I think it's standard in Fedora, along with SELinux. I didn't try to apply their latest patch for 2.6.26 (revision 1.93 or 1.94) to a Debian kernel source, but it might be a better starting point than the current version in Debian. [1] http://cvs.fedora.redhat.com/viewvc/devel/kernel/linux-2.6-execshield.patch?root=extras&view=log -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509558: dvdrip-queue is incompatible to dvdrip package
CCing the maintainer: * Debian [2008-12-23 11:10]: > Package: dvdrip-queue > Version: 0.1.3-0.0 > Severity: grave > Justification: renders package unusable > > *** Please type your report below this line *** > > Starting the program ends in a message: > "Sorry, you don't have a compatible version of DvdRip installed, try version > 0.98.6" > > But the actual version is 0.98.9 ! > > > -- System Information: > Debian Release: 5.0 > APT prefers testing > APT policy: (500, 'testing') > Architecture: amd64 (x86_64) > > Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) > Locale: lang=de...@euro, lc_ctype=de...@euro (charmap=ISO-8859-1) (ignored: > LC_ALL > set to de_DE) > Shell: /bin/sh linked to /bin/bash > > Versions of packages dvdrip-queue depends on: > ii dvdrip 1:0.98.9-0.0 perl front end for transcode and > f > ii python-glade2 2.12.1-6 GTK+ bindings: Glade support > ii python-support 0.8.4automated rebuilding support for > P > > dvdrip-queue recommends no packages. > > dvdrip-queue suggests no packages. > > -- no debconf information > > > -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#509558: marked as done (dvdrip-queue is incompatible to dvdrip package)
Your message dated Wed, 24 Dec 2008 09:13:26 +0100 with message-id <20081224081326.gg30...@deprecation.cyrius.com> and subject line Re: Bug#509558: dvdrip-queue is incompatible to dvdrip package has caused the Debian Bug report #509558, regarding dvdrip-queue is incompatible to dvdrip package to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 509558: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=509558 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: dvdrip-queue Version: 0.1.3-0.0 Severity: grave Justification: renders package unusable *** Please type your report below this line *** Starting the program ends in a message: "Sorry, you don't have a compatible version of DvdRip installed, try version 0.98.6" But the actual version is 0.98.9 ! -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: lang=de...@euro, lc_ctype=de...@euro (charmap=ISO-8859-1) (ignored: LC_ALL set to de_DE) Shell: /bin/sh linked to /bin/bash Versions of packages dvdrip-queue depends on: ii dvdrip 1:0.98.9-0.0 perl front end for transcode and f ii python-glade2 2.12.1-6 GTK+ bindings: Glade support ii python-support 0.8.4automated rebuilding support for P dvdrip-queue recommends no packages. dvdrip-queue suggests no packages. -- no debconf information --- End Message --- --- Begin Message --- * Debian [2008-12-23 11:10]: > Package: dvdrip-queue I'm closing this bug in the Debian BTS since the package is not in Debian. -- Martin Michlmayr http://www.cyrius.com/ --- End Message ---
