Bug#680209: fabric: using wrong ssh library python-paramiko 1.7.7.1
Package: fabric Version: 1.4.3-1 Followup-For: Bug #680209 Hello, I'm afraid, the bug cannot be closed until fabric dependencies are changed from python-paramiko (= 1.6) to python-paramiko (= 1.8), and until python-paramiko 1.8 is added to Debian repositories. Right now, with fabric 1.4.3 and paramiko 1.7.7, I still experience this kind of issue, receiving the tracebacks like AttributeError: 'module' object has no attribute 'AgentRequestHandler'. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'stable'), (480, 'stable'), (450, 'unstable'), (400, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.5-trunk-amd64 (SMP w/2 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages fabric depends on: ii python2.7.3~rc2-1 ii python-nose 1.1.2-3 ii python-paramiko 1.7.7.1-3 ii python-pkg-resources 0.6.24-1 ii python2.6 2.6.8-0.2 ii python2.7 2.7.3~rc2-2.1 fabric recommends no packages. Versions of packages fabric suggests: ii libjs-jquery 1.7.2+dfsg-1 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#566376: linux-image-2.6.32-trunk-amd64: X unconditionally hangs up on bootup
Package: linux-2.6 Version: 2.6.32-5 Severity: grave Justification: renders package unusable None of the linux-image-2.6.32-trunk-amd64 packages, since they reached unstable, ever booted successfully on my laptop. X system darkens the screen and hangs the computer completely (i.e. cannot even switch to the console via Ctrl-Alt-F1), as soon as the booting process reaches KDM; Alt-SysRq-B works though. Please tell me what logs should be included to debug this problem, I'll help as much as I can. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: LENOVO product_name: 7762WHW product_version: ThinkPad X61 Tablet chassis_vendor: LENOVO chassis_version: Not Available bios_vendor: LENOVO bios_version: 7SET34WW (1.20 ) board_vendor: LENOVO board_name: 7762WHW board_version: Not Available ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) Subsystem: Lenovo T61 [17aa:20b3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort+ SERR- PERR- INTx- Latency: 0 Capabilities: access denied Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Lenovo T61 [17aa:20b5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at f810 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at e000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Expansion ROM at unassigned [disabled] Capabilities: access denied 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c) Subsystem: Lenovo T61 [17aa:20b5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Region 0: Memory at f820 (64-bit, non-prefetchable) [size=1M] Capabilities: access denied 00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03) Subsystem: Lenovo Device [17aa:20de] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 26 Region 0: Memory at fe00 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at fe225000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 1840 [size=32] Capabilities: access denied Kernel driver in use: e1000e 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad T61 [17aa:20aa] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad T60 [17aa:20aa] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo ThinkPad T61 [17aa:20ab] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at fe226c00 (32-bit, non-prefetchable) [size=1K] Capabilities: access denied
Bug#434867: linux-image-2.6.18-4-686: 2.6.18.dfsg.1-12etch2 hangs on boot after USB disconnect
Package: linux-image-2.6.18-4-686 Severity: critical Justification: breaks the whole system After aptitude upgrade-ing the computer, which caused the 2.6.18.dfsg.1-12etch2 of linux-image-2.6.18-4-686 to be installed, the computer freezes on boot somewhere after initializing the USB. Previously working kernel was 2.6.18.dfsg.1-11. The system is unusable, and I don't have RS-232 cables to grab the complete bootup log, but below is the end of the log: Disabling IRQ #233 ACPI: PCI Interrupt :00:1d.7[A] - GSI 23 (level, low) - IRQ 225 ehci_hcd :00:1d.7: EHCI Host Controller ehci_hcd :00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd :00:1d.7: irq 225, io mem 0xfdffe000 ehci_hcd :00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected usb 1-2: USB disconnect, address 2 -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (500, 'testing'), (500, 'stable'), (480, 'stable'), (450, 'unstable'), (400, 'experimental'), (1, 'experimental') Architecture: i386 (i586) Kernel: Linux 2.6.18-4-486 Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#361308: Fails to install 2.6.15: dpkg: error processing linux-image-2.6.15-1-486 (--configure):
Package: linux-image-2.6.15-1-486 Version: 2.6.15-8 Severity: grave Justification: renders package unusable Hello, 2.6.15 kernel just fails to install (similarly to 2.6.16 from unstable): == [EMAIL PROTECTED]:/boot$ LANG=C sudo aptitude install linux-image-2.6.15-1-486 Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done The following packages have been kept back: apache2 apache2-common apache2-mpm-worker apache2-utils apcupsd asterisk asterisk-config binutils bittornado bsdutils cpio cpp-4.0 curl ethereal-common exim4 exim4-base exim4-config exim4-daemon-light g++-4.0 gcc-4.0 gcc-4.0-base gcc-4.0-doc gcc-4.0-locales gobjc-4.0 gzip klibc-utils libapr0 libasn1-6-heimdal libc6 libc6-dev libcrypt-cbc-perl libcupsys2-gnutls10 libcurl3 libgcc1 libgnutls11 libgpg-error0 libgssapi1-heimdal libgtk2.0-0 libgtk2.0-bin libgtk2.0-common libhtml-template-perl libice6 libidn11 libklibc libkrb5-17-heimdal libkrb53 libobjc1 libpcre3 libperl5.8 libpq4 libselinux1 libsensors3 libsepol1 libsm6 libsnmp-base libsnmp5 libssl0.9.7 libssl0.9.8 libstdc++6 libstdc++6-4.0-dev libusb-0.1-4 libx11-6 libxaw7 libxext6 libxft1 libxi6 libxmu6 libxmuu1 libxp6 libxpm4 libxrandr2 libxt6 libxtrap6 libxtst6 lm-sensors locales lsb-base mc mldonkey-server module-init-tools mount ntp ntp-doc ntp-server ntp-simple odbcinst1debian1 openssh-client openssh-server openssl perl perl-base perl-doc perl-modules proftpd proftpd-common python2.3 samba samba-common sensord smbclient smbfs squid squid-cgi squid-common ssh sudo tar tcpdump tethereal udev unixodbc unzip usbutils util-linux vim vim-common xfree86-common xlibs xlibs-data xterm xutils zlib1g zsh The following NEW packages will be installed: linux-image-2.6.15-1-486 0 packages upgraded, 1 newly installed, 0 to remove and 123 not upgraded. Need to get 0B/15.8MB of archives. After unpacking 45.9MB will be used. Writing extended state information... Done Preconfiguring packages ... Selecting previously deselected package linux-image-2.6.15-1-486. (Reading database ... 48604 files and directories currently installed.) Unpacking linux-image-2.6.15-1-486 (from .../linux-image-2.6.15-1-486_2.6.15-8_i386.deb) ... Done. Setting up linux-image-2.6.15-1-486 (2.6.15-8) ... Running depmod. Finding valid ramdisk creators. Using mkinitrd.yaird to build the ramdisk. Running postinst hook /sbin/update-grub. Searching for GRUB installation directory ... found: /boot/grub . dpkg: error processing linux-image-2.6.15-1-486 (--configure): subprocess post-installation script returned error exit status 128 Errors were encountered while processing: linux-image-2.6.15-1-486 E: Sub-process /usr/bin/dpkg returned an error code (1) Ack! Something bad happened while installing packages. Trying to recover: Setting up linux-image-2.6.15-1-486 (2.6.15-8) ... Running depmod. Finding valid ramdisk creators. Using mkinitrd.yaird to build the ramdisk. Not updating initrd symbolic links since we are being updated/reinstalled (2.6.15-8 was configured last, according to dpkg) Not updating image symbolic links since we are being updated/reinstalled (2.6.15-8 was configured last, according to dpkg) Running postinst hook /sbin/update-grub. Searching for GRUB installation directory ... found: /boot/grub . Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done = To note: currently I am running linux-image-2.6.14-2-386 version 2.6.14-6, and it did not have such problems. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i586) Kernel: Linux 2.6.14-2-386 Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Versions of packages linux-image-2.6.15-1-486 depends on: ii module-init-tools 3.2.2-1tools for managing Linux kernel mo ii yaird [linux-initramfs-tool] 0.0.12-9 Yet Another mkInitRD -- debconf information: linux-image-2.6.15-1-486/postinst/kimage-is-a-directory: linux-image-2.6.15-1-486/preinst/initrd-2.6.15-1-486: * linux-image-2.6.15-1-486/preinst/overwriting-modules-2.6.15-1-486: false linux-image-2.6.15-1-486/postinst/create-kimage-link-2.6.15-1-486: true linux-image-2.6.15-1-486/preinst/lilo-has-ramdisk: linux-image-2.6.15-1-486/preinst/lilo-initrd-2.6.15-1-486: true linux-image-2.6.15-1-486/postinst/bootloader-error-2.6.15-1-486: linux-image-2.6.15-1-486/prerm/removing-running-kernel-2.6.15-1-486: true linux-image-2.6.15-1-486/preinst/elilo-initrd-2.6.15-1-486: true linux-image-2.6.15-1-486/postinst/depmod-error-2.6.15-1-486: false
