Bug#578007: marked as done (initramfs-tools: no lvm in initramfs with 0.94.4)
Your message dated Tue, 18 May 2010 09:14:16 +0200 with message-id 20100518071416.ga12...@torres.zugschlus.de and subject line Re: Bug#578007: initramfs-tools: no lvm in initramfs with 0.94.4 has caused the Debian Bug report #578007, regarding initramfs-tools: no lvm in initramfs with 0.94.4 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 578007: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=578007 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: initramfs-tools Version: 0.94.4 Severity: important Hi, when building my initramfs with initramfs-tools 0.94.4, I end up without scripts/local-top/lvm, hence an unbootable system. Downgrading initramfs-tools to 0.92o from stable fixes the issue. The following data was collected after the downgrade and might thus not exactly represent the state of the system at the time of the bug. Greetings Marc -- Package-specific info: -- /proc/cmdline BOOT_IMAGE=/vmlinuz-2.6.33.2-zgws1 root=/dev/mapper/root ro resume=/dev/mapper/swap0 quiet splash video=radeon:modeset=0 -- /proc/filesystems ext3 -- lsmod Module Size Used by tun 2 lib80211_crypt_ccmp 3719 2 ppdev 4294 0 lp 5768 0 rfcomm 25565 4 sco 6247 2 bnep7211 2 l2cap 25577 16 rfcomm,bnep crc16 1011 1 l2cap ipt_ULOG4461 1 vboxnetadp 5186 0 vboxnetflt 10586 0 vboxdrv 117006 2 vboxnetadp,vboxnetflt acpi_cpufreq5059 0 cpufreq_powersave606 0 cpufreq_userspace 1372 0 cpufreq_conservative 7036 0 cpufreq_ondemand6169 1 freq_table 1743 2 acpi_cpufreq,cpufreq_ondemand iptable_filter 1030 0 ipt_MASQUERADE 1130 10 iptable_nat 2798 1 nf_nat 10767 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 7663 3 iptable_nat,nf_nat nf_conntrack 39743 4 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 799 1 nf_conntrack_ipv4 ip_tables 7397 2 iptable_filter,iptable_nat x_tables9112 4 ipt_ULOG,ipt_MASQUERADE,iptable_nat,ip_tables binfmt_misc 4883 1 8021q 14027 0 bridge 35340 0 stp 1032 1 bridge llc 2613 2 bridge,stp ipv6 196115 38 snd_intel8x0 20043 3 snd_intel8x0m 8400 5 snd_ac97_codec 80233 2 snd_intel8x0,snd_intel8x0m ac97_bus 742 1 snd_ac97_codec snd_pcm_oss28573 0 snd_mixer_oss 11983 1 snd_pcm_oss snd_pcm48151 7 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss snd_seq_dummy959 0 snd_seq_oss21024 0 pcmcia 23354 0 snd_seq_midi3496 0 ipw2200 101601 0 snd_rawmidi13140 1 snd_seq_midi libipw 19140 1 ipw2200 snd_seq_midi_event 3968 2 snd_seq_oss,snd_seq_midi snd_seq35503 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event btusb 8416 2 yenta_socket8878 3 snd_timer 13290 3 snd_pcm,snd_seq cfg80211 92511 2 ipw2200,libipw rsrc_nonstatic 7483 1 yenta_socket snd_seq_device 3965 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq bluetooth 38935 9 rfcomm,sco,bnep,l2cap,btusb rfkill 11140 3 cfg80211,bluetooth pcmcia_core22364 3 pcmcia,yenta_socket,rsrc_nonstatic snd36436 23 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device lib802112938 3 lib80211_crypt_ccmp,ipw2200,libipw parport_pc 16931 1 i2c_i8015888 0 soundcore 4143 1 snd rtc_cmos6858 0 parport12962 3 ppdev,lp,parport_pc intel_agp 19857 1 rng_core2398 0 snd_page_alloc 5185 3 snd_intel8x0,snd_intel8x0m,snd_pcm video 15566 0 psmouse28445 0 rtc_core9649 1 rtc_cmos rtc_lib 1349 1 rtc_core output 1292 1 video pcspkr 1259 0 evdev 5985 15 ext3 87833 8 jbd
Processed: tagging 466977
Processing commands for cont...@bugs.debian.org: # Automatically generated email from bts, devscripts version 2.10.35lenny7 tags 466977 + pending Bug #466977 [linux-2.6] 2.6.24-1-sb1-bcm91250a mipsel hangs running init Bug #404951 [linux-2.6] linux-2.6: sb1-bcm91250a kernel does not boot Ignoring request to alter tags of bug #466977 to the same tags previously set Ignoring request to alter tags of bug #404951 to the same tags previously set End of message, stopping processing here. Please contact me if you need assistance. -- 466977: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=466977 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12741679544152.transcr...@bugs.debian.org
Processed: tagging 580602
Processing commands for cont...@bugs.debian.org: # Automatically generated email from bts, devscripts version 2.10.35lenny7 tags 580602 + pending Bug #580602 [src:linux-2.6] linux-2.6: mips FPU emulation broken Ignoring request to alter tags of bug #580602 to the same tags previously set End of message, stopping processing here. Please contact me if you need assistance. -- 580602: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580602 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12741679584222.transcr...@bugs.debian.org
Bug#567098: linux-image-2.6.26-2-ixp4xx: adm8511/pegasus usb ethernet device loses mac on nslu2 when cold-plugged
*ping* * Martin Michlmayr t...@cyrius.com [2010-04-25 22:23]: Devin, did you report this issue upstream? * Martin Michlmayr t...@cyrius.com [2010-02-22 21:49]: * Devin Carraway de...@debian.org [2010-01-27 02:19]: I've been experimenting with a Pegasus-chipset USB ethernet adapter on an NSLU2 unit. If the adapter is connected prior to system boot, although it will be recognized by the kernel and udev, it starts out with a MAC address of 00:00:00:00:00:00. I finally got around to testing my Pegasus USB Ethernet (a different one to yours) with my NSLU2 and I cannot reproduce this issue (see attached dmesg and udevadm). Can you please report this issue directly to Petko Manolov pet...@users.sourceforge.net, net...@vger.kernel.org (the maintainer of the Pegasus driver and the Linux networking list) and also CC: Krzysztof Halasa k...@pm.waw.pl (the maintainer of the IXP4xx platform) Thanks. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100518112120.ga10...@jirafa.cyrius.com
Re: Bug#581715: acpi-fakekey: kernel-provided name 'uinput' and NAME= 'input/uinput' disagree
reassign 581715 linux-2.6 thanks On May 15, Marco d'Itri m...@linux.it wrote: I'm not sure if this is a problem in acpi_fakekeyd or in udev; loading I'd say that the kernel should be fixed to hint input/uinput. Kay confirmed, the kernel should be changed to hint input!uinput instead of just uinput. -- ciao, Marco signature.asc Description: Digital signature
Processed: Re: Bug#581715: acpi-fakekey: kernel-provided name 'uinput' and NAME= 'input/uinput' disagree
Processing commands for cont...@bugs.debian.org: reassign 581715 linux-2.6 Bug #581715 [udev] acpi-fakekey: kernel-provided name 'uinput' and NAME= 'input/uinput' disagree Bug reassigned from package 'udev' to 'linux-2.6'. Bug No longer marked as found in versions udev/154-1. thanks Stopping processing here. Please contact me if you need assistance. -- 581715: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581715 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.127418302722632.transcr...@bugs.debian.org
Bug#582105: 855GM: hard hang when closing lid
Package: linux-image-2.6.33-2-686 Version: 2.6.33-1~experimental.5 A laptop with 855GM video chipset (Dell Latitude X300) hangs whenever I close the lid. Using kms. Julien is telling me that this is a known issue, but I cannot find a relevant bug report. This is the case with all kernels tried to date (32-3, 32-5, 32-trunk, 33-1), and appears not to be related to the X server (the crash happens when there is no X server). My current work around is don't do this, then, which is extremely annoying when you forget about it. --jch pgp35N24pUChl.pgp Description: PGP signature
Bug#582107: NFS mounts default to version 4, don't fall back automatically
Package: nfs-common Version: 1:1.2.2-1 Recent versions of mount.nfs default to NFS version 4. The result is that mounting ordinary version 3 filesystems fails with EPERM. The bug is not the new default, which is open to debate; the bug is that Sun RPC is supposed to allow negotiation of the protocol version, and that mount appears unable to fall back to version 3 if version 4 is not supported by the server. A workaround is to add vers=3 to the options column in /etc/fstab. --jch pgp00KQYmP05g.pgp Description: PGP signature
Bug#582105: 855GM: hard hang when closing lid
On Tue, May 18, 2010 at 14:10:14 +0200, Juliusz Chroboczek wrote: Package: linux-image-2.6.33-2-686 Version: 2.6.33-1~experimental.5 A laptop with 855GM video chipset (Dell Latitude X300) hangs whenever I close the lid. Using kms. Julien is telling me that this is a known issue, but I cannot find a relevant bug report. I was thinking of the bug fixed by: commit 7b9c5abee98c54f85bcc04bd4d7ec8d5094c73f4 Author: Jesse Barnes jbar...@virtuousgeek.org Date: Fri Feb 12 09:30:00 2010 -0800 drm/i915: give up on 8xx lid status These old machines more often than not lie about their lid state. So don't use it to detect LVDS presence, but leave the event handler to deal with lid open/close, when we might need to reset the mode. Fixes kernel bug #15248 Signed-off-by: Jesse Barnes jbar...@virtuousgeek.org Cc: sta...@kernel.org Signed-off-by: Eric Anholt e...@anholt.net but that's apparently a different issue (that seems to only affect initial detection). Can you try setting up netconsole to get some more info? The remaining 855GM issue I know of is https://bugs.freedesktop.org/show_bug.cgi?id=27187 Also, again, please use reportbug to file bugs… Cheers, Julien signature.asc Description: Digital signature
uploading 2.6.34
upload planed by tomorrow 12 UT. remaining issues, please speakup: * one last run through open config variables (will do later today) -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100518133055.gb2...@stro.at
linux-2.6_2.6.32-13_amd64.changes ACCEPTED
Accepted: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-libc-dev_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-libc-dev_2.6.32-13_amd64.deb linux-manual-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-manual-2.6.32_2.6.32-13_all.deb linux-patch-debian-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-13_all.deb linux-source-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-source-2.6.32_2.6.32-13_all.deb linux-support-2.6.32-5_2.6.32-13_all.deb to main/l/linux-2.6/linux-support-2.6.32-5_2.6.32-13_all.deb xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb Override entries for your package: firmware-linux-free_2.6.32-13_all.deb - optional kernel linux-2.6_2.6.32-13.dsc - source devel linux-base_2.6.32-13_all.deb - optional kernel linux-doc-2.6.32_2.6.32-13_all.deb - optional doc linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb - optional kernel linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb - optional kernel linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb - optional kernel linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb - optional kernel linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb - optional kernel linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb - optional kernel linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb - optional kernel linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb - optional kernel linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb - optional kernel linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb - optional kernel linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb - extra debug linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb - optional kernel linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb - extra debug linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb - optional kernel linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb - extra debug linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb - optional kernel linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb - extra debug linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb - optional kernel linux-libc-dev_2.6.32-13_amd64.deb - optional devel linux-manual-2.6.32_2.6.32-13_all.deb - optional doc
Bug#365349: marked as done (Add support for creating a debuginfo package)
Your message dated Tue, 18 May 2010 14:22:51 + with message-id e1oenh5-0002fd...@ries.debian.org and subject line Bug#365349: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #365349, regarding Add support for creating a debuginfo package to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 365349: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=365349 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: kernel-package Version: 10.036 Severity: wishlist As support for kexec/kdump support becomes more real, it will be very useful to be able to build kernels that have debugging information available, but not necessarily to install the debugging information on every single client system. Red Hat solves this problem by having a kernel debuginfo package, and building the kernel with the -g flag so the object files have debugging information. Unfortunately this makes the .ko object files gargantuan, so they are stripped of the debugging information before they are placed in the standard linux-image installation package. However, before that, a copy of the vmlinux and unstripped .ko files are saved in a debuginfo package. This means that if someone ends up with a crash dump, they can send it to a support engineer and only the support engineer needs to install the debuginfo package and use the crash utility to debug the crash dump. It's also useful for developers, since the debuginfo information can be stored somewhere outside of /lib --- Red Hat uses /usr/src/debug/package-version --- for storing its debug information, for example. This is useful for keeping the size of the root partition small, for those who keep / separate from /usr. It would be nice if Debian had similar capabilities, as it would be Extremely Useful for kernel developers, as well as people who want to be able to provide commercial support for Debian or Debian derivitives in the future. Thanks, - Ted -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (200, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16.1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages kernel-package depends on: ii dpkg 1.13.17 package maintenance system for Deb ii dpkg-dev 1.13.16 package building tools for Debian ii file 4.17-1 Determines file type using magic ii gcc [c-compiler] 4:4.0.2-2 The GNU C compiler ii gcc-3.4 [c-compiler] 3.4.6-1 The GNU C compiler ii gcc-4.0 [c-compiler] 4.0.3-1 The GNU C compiler ii gettext 0.14.5-2GNU Internationalization utilities ii make 3.80+3.81.rc1-1 The GNU version of the make util ii perl 5.8.7-10Larry Wall's Practical Extraction ii po-debconf 1.0 manage translated Debconf template Versions of packages kernel-package recommends: ii bzip2 1.0.3-2high-quality block-sorting file co ii libc6-dev [libc-dev] 2.3.6-4GNU C Library: Development Librari -- no debconf information ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb
Bug#500013: marked as done (linux-image-2.6-amd64: Please provide a debug package for the kernel)
Your message dated Tue, 18 May 2010 14:22:51 + with message-id e1oenh5-0002fd...@ries.debian.org and subject line Bug#365349: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #365349, regarding linux-image-2.6-amd64: Please provide a debug package for the kernel to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 365349: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=365349 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6-amd64 Version: 2.6.26+16 Severity: wishlist Hi, It will be great if a debug package is provided for the kernel. To use tools like oprofile, it will be helpful to have one. Other distros (sorry, name withheld!) provides such a package. Thanks for the good work! regards Ramakrishnan -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6-amd64 depends on: ii linux-image-2.6.26-1-amd642.6.26-4 Linux 2.6.26 image on AMD64 linux-image-2.6-amd64 recommends no packages. linux-image-2.6-amd64 suggests no packages. -- no debconf information ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-libc-dev_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-libc-dev_2.6.32-13_amd64.deb linux-manual-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-manual-2.6.32_2.6.32-13_all.deb linux-patch-debian-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-13_all.deb
Bug#492676: marked as done (linux-2.6: should be compatible with systemtap)
Your message dated Tue, 18 May 2010 14:22:51 + with message-id e1oenh5-0002fd...@ries.debian.org and subject line Bug#365349: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #365349, regarding linux-2.6: should be compatible with systemtap to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 365349: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=365349 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: systemtap Version: 0.0.20061028-2 Severity: grave Justification: renders package unusable This package needs CONFIG_KPROBES to be set on the kernel, but the option is unset on stock linux 2.6.18. This makes it impossible to execute even simple scripts such as: # stap -ve 'probe begin { log(hello world) exit () }' I'm not aware of other stock kernel version which may have CONFIG_KPROBES set. -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-6-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages systemtap depends on: ii libc6 2.3.6.ds1-13etch7 GNU C Library: Shared libraries ii libelf10.123-3 library to read and write ELF file ii libgcc11:4.1.1-21GCC support library ii libglib2.0-0 2.12.4-2 The GLib library of C routines ii libmysqlclient15off5.0.32-7etch6 mysql database client library ii libstdc++6 4.1.1-21 The GNU Standard C++ Library v3 ii sudo 1.6.8p12-4Provide limited super user privile systemtap recommends no packages. -- no debconf information ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb
Bug#488495: marked as done (Multicast broken in r8169 for one version of Thecus N2100)
Your message dated Tue, 18 May 2010 14:22:52 + with message-id e1oenh6-0002fi...@ries.debian.org and subject line Bug#407217: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #407217, regarding Multicast broken in r8169 for one version of Thecus N2100 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 407217: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=407217 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.25-2-iop32x Version: 2.6.25-5 Severity: normal I have a NAS (Thecus N2100, IOP32x based) connected to my network using the r8169 driver. When I start avahi-daemon on the NAS, the rest of the network sees the multicast zeroconf announce packets being sent. If I wait five minutes for the caches to expire in the clients and then ask another machine to resolve the names the NAS is announcing, the lookups fail. The same happens with UPnP, which also uses multicast UDP packets to work. My conclusion is that multicast packets being received by r8169 are not being correctly handled. I've also tried enabling ALLMULTI and PROMISC, which had no effect. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-libc-dev_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-libc-dev_2.6.32-13_amd64.deb linux-manual-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-manual-2.6.32_2.6.32-13_all.deb
Bug#486442: marked as done (Multicast broken in r8169 for one version of Thecus N2100)
Your message dated Tue, 18 May 2010 14:22:52 + with message-id e1oenh6-0002fi...@ries.debian.org and subject line Bug#407217: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #407217, regarding Multicast broken in r8169 for one version of Thecus N2100 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 407217: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=407217 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.25-1-iop32x Version: 2.6.25-1 Severity: normal Hardware: Thecus n2100, two gigabit ethernet hards RTL-8169 Both cards work strangely: they refuse to receive broadcast, multicast packets and ARP responses when not in promiscous mode, while they're able to respond to ARP requests, so I'm able to use the network when interfaces are statically configured. I suppose that network dump is useless in this case, as merely running tcpdump makes cards work fine, so I'm pretty out of ideas what should I add to the bug report :) -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: armel (armv5tel) Kernel: Linux 2.6.25-1-iop32x Locale: LANG=C, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.25-1-iop32x depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92b tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.25-1-iop32x recommends no packages. -- debconf information: linux-image-2.6.25-1-iop32x/preinst/failed-to-move-modules-2.6.25-1-iop32x: linux-image-2.6.25-1-iop32x/preinst/elilo-initrd-2.6.25-1-iop32x: true linux-image-2.6.25-1-iop32x/postinst/bootloader-test-error-2.6.25-1-iop32x: shared/kernel-image/really-run-bootloader: true linux-image-2.6.25-1-iop32x/postinst/kimage-is-a-directory: linux-image-2.6.25-1-iop32x/preinst/already-running-this-2.6.25-1-iop32x: linux-image-2.6.25-1-iop32x/postinst/depmod-error-initrd-2.6.25-1-iop32x: false linux-image-2.6.25-1-iop32x/preinst/bootloader-initrd-2.6.25-1-iop32x: true linux-image-2.6.25-1-iop32x/postinst/create-kimage-link-2.6.25-1-iop32x: true linux-image-2.6.25-1-iop32x/postinst/old-system-map-link-2.6.25-1-iop32x: true linux-image-2.6.25-1-iop32x/preinst/initrd-2.6.25-1-iop32x: linux-image-2.6.25-1-iop32x/postinst/depmod-error-2.6.25-1-iop32x: false linux-image-2.6.25-1-iop32x/postinst/old-dir-initrd-link-2.6.25-1-iop32x: true linux-image-2.6.25-1-iop32x/preinst/abort-overwrite-2.6.25-1-iop32x: linux-image-2.6.25-1-iop32x/preinst/lilo-initrd-2.6.25-1-iop32x: true linux-image-2.6.25-1-iop32x/postinst/old-initrd-link-2.6.25-1-iop32x: true linux-image-2.6.25-1-iop32x/preinst/overwriting-modules-2.6.25-1-iop32x: true linux-image-2.6.25-1-iop32x/preinst/abort-install-2.6.25-1-iop32x: linux-image-2.6.25-1-iop32x/prerm/removing-running-kernel-2.6.25-1-iop32x: true linux-image-2.6.25-1-iop32x/prerm/would-invalidate-boot-loader-2.6.25-1-iop32x: true linux-image-2.6.25-1-iop32x/postinst/bootloader-error-2.6.25-1-iop32x: linux-image-2.6.25-1-iop32x/preinst/lilo-has-ramdisk: -- ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb
Bug#494363: marked as done (Multicast broken in r8169 for one version of Thecus N2100)
Your message dated Tue, 18 May 2010 14:22:52 + with message-id e1oenh6-0002fi...@ries.debian.org and subject line Bug#407217: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #407217, regarding Multicast broken in r8169 for one version of Thecus N2100 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 407217: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=407217 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.25-2-iop32x Version: 2.6.25-7 Severity: normal Apparently the nic driver for my thecus n2100 has a problem with multicast packets. It ignores them unless put in promisc or allmulti mode. This means that IPV6 doesn't work right by default, since ipv6 relies on multicast traffic to do neighbor discovery. For example, I start tcpdump on the n2100, using -p to avoid putting it into promisc mode: r...@turtle:/home/joeytcpdump -p -n -i eth0 # Here I start ping6 from ::feb2:9663 (box next to the n2100) to # 2001:4830:1231::1 (the n2100). There are no responses. ^Z r...@turtle:/home/joeyifconfig eth0 allmulti; fg 14:20:01.038563 IP6 2001:4830:1231:0:20c:f1ff:feb2:9663 ff02::1:ff00:1: ICMP6, neighbor solicitation, who has 2001:4830:1231::1, length 32 14:20:01.038975 IP6 2001:4830:1231::1 2001:4830:1231:0:20c:f1ff:feb2:9663: ICMP6, neighbor advertisement, tgt is 2001:4830:1231::1, length 32 14:20:01.039295 IP6 2001:4830:1231:0:20c:f1ff:feb2:9663 2001:4830:1231::1: ICMP6, echo request, seq 28, length 64 14:20:01.039602 IP6 2001:4830:1231::1 2001:4830:1231:0:20c:f1ff:feb2:9663: ICMP6, echo reply, seq 28, length 64 14:20:02.038770 IP6 2001:4830:1231:0:20c:f1ff:feb2:9663 2001:4830:1231::1: ICMP6, echo request, seq 29, length 64 14:20:02.039015 IP6 2001:4830:1231::1 2001:4830:1231:0:20c:f1ff:feb2:9663: ICMP6, echo reply, seq 29, length 64 14:20:03.042996 IP6 2001:4830:1231:0:20c:f1ff:feb2:9663 2001:4830:1231::1: ICMP6, echo request, seq 30, length 64 14:20:03.043320 IP6 2001:4830:1231::1 2001:4830:1231:0:20c:f1ff:feb2:9663: ICMP6, echo reply, seq 30, length 64 # Now ping is working. ^C r...@turtle:/home/joeyifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:14:fd:30:14:ae inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: 2001:4830:1231::1/64 Scope:Global inet6 addr: fe80::214:fdff:fe30:14ae/64 Scope:Link UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:10624092 errors:0 dropped:0 overruns:0 frame:0 TX packets:12315556 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2505702674 (2.3 GiB) TX bytes:3802624039 (3.5 GiB) Interrupt:27 Base address:0xc200 j...@dodo:~ifconfig eth0 # machine I was pinging from eth0 Link encap:Ethernet HWaddr 00:0c:f1:b2:96:63 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: 2001:4830:1231:0:20c:f1ff:feb2:9663/64 Scope:Global inet6 addr: fe80::20c:f1ff:feb2:9663/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15302416 errors:0 dropped:0 overruns:0 frame:0 TX packets:14007641 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4180405781 (3.8 GiB) TX bytes:1835701985 (1.7 GiB) Pinging between other machines on the same network (including nslu2, various intel white boxes etc) works ok, so I don't think it's a problem with my switch or general network. Some more details about this problem here: https://www.sixxs.net/forum/?msg=setup-780039 -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: armel (armv5tel) Kernel: Linux 2.6.25-2-iop32x Locale: LANG=, LC_CTYPE= (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.25-2-iop32x depends on: ii debconf [debconf-2.0] 1.5.23 Debian configuration management sy ii initramfs-tools [linux-initra 0.92e tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.25-2-iop32x recommends no packages. Versions of packages linux-image-2.6.25-2-iop32x suggests: pn fdutils none (no description available) pn linux-doc-2.6.25 none (no description available) -- debconf information excluded -- see shy jo ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that
Bug#407217: marked as done (Multicast broken in r8169 for one version of Thecus N2100)
Your message dated Tue, 18 May 2010 14:22:52 + with message-id e1oenh6-0002fi...@ries.debian.org and subject line Bug#407217: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #407217, regarding Multicast broken in r8169 for one version of Thecus N2100 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 407217: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=407217 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: avahi-daemon Version: 0.6.15-2 Severity: important Hello, I use mt-daapd and thus avahi-daemon on a Thecus n2100 embedded ARM box. I routinely find that the shares do not appear on workstations on the same LAN after a period of inactivity. Restarting the daemons via /etc/init.d results in them re-appearing. Here's an example, with times: Tue Jan 16 19:32:10 GMT 2007 I am confident that mt-daapd and avahi-daemon were running on the n2100 when I last looked. However neither the n2100 as a Workstation or as an Itunes share are present in avahi-discover on my workstation, nor rhythmbox (my primary daapd client). Looking on the server, the mt-daapd and avahi-daemon processes are indeed present. I restart mt-daapd and it shows up in avahi-discover and rhythmbox on my client. Tue Jan 16 21:58:32 GMT 2007 I've been away from the computer for about 90 minutes, during which rhythmbox has been idle. On return, I see that the mt-daapd share is not visible in rhythmbox anymore and the workstation/itunes entries are missing from avahi-discover. Logging onto the server, the mt-daapd and avahi-daemon processes are present. Looking at the logs (mt-daapd.log, I've configured it to log outside of syslog), I can see that I last played a tune 100 minutes ago. There are also two further log messages: 2007-01-16 20:19:20 (00084005): Session 1: Streaming file '207-the_cure-airlock-the_soundtrack.mp3' to 192.168.123.110 (offset 0) 2007-01-16 20:50:24 (0008c005): Thread 30: Entering ws_returnerror (204: Logout Successful) 2007-01-16 21:20:24 (00088004): Thread 29: could not read: Timer expired There is nothing further from avahi-daemon or from mt-daapd in any other files (e.g. syslog). I can turn up debugging for mt-daapd, but I'm not sure how to do that for avahi-daemon, at least not cleanly: I may file a separate wishlist bug to ask for support for this in /etc/default/avahi-daemon or similar. For now I've hacked the --debug option directly into /etc/init.d/avahi-daemon. I'll report back to this bug if I get more info as a result of this hack. Because the workstation entries disappear from avahi-discover in addition to the itunes share, I think this might be an avahi-daemon bug, rather than one specific to mt-daapd. Restarting mt-daapd results in the itunes share returning, but not the workstation entry: restarting avahi-daemon results in the workstation entry returning, but not the itunes share. -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Versions of packages avahi-daemon depends on: ii adduser 3.100 Add and remove users and groups ii dbus 1.0.2-1 simple interprocess messaging syst ii libavahi-common3 0.6.15-2Avahi common library ii libavahi-core4 0.6.15-2Avahi's embeddable mDNS/DNS-SD lib ii libc62.3.6.ds1-8 GNU C Library: Shared libraries ii libcap1 1:1.10-14 support for getting/setting POSIX. ii libdaemon0 0.10-1 lightweight C library for daemons ii libdbus-1-3 1.0.2-1 simple interprocess messaging syst ii libexpat11.95.8-3.3 XML parsing C library - runtime li Versions of packages avahi-daemon recommends: ii libnss-mdns 0.8-4.1NSS module for Multicast DNS name -- no debconf information signature.asc Description: Digital signature ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to
Bug#466977: marked as done (2.6.24-1-sb1-bcm91250a mipsel hangs running init)
Your message dated Tue, 18 May 2010 14:22:54 + with message-id e1oenh8-0002fn...@ries.debian.org and subject line Bug#466977: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #466977, regarding 2.6.24-1-sb1-bcm91250a mipsel hangs running init to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 466977: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=466977 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.24-1-sb1-bcm91250a Version: 2.6.24-4 Arch: mipsel Hi, running on a Broadcom SB1 *little endian* the kernel hangs trying to run init. The old 2.6.17 works (linux-image-2.6.17-1-sb1 version 2.6.17-5): Set up command line arguments to: root=/dev/hda3 console=duart0 Setting up initial prom_init arguments Cleaning up state... Transferring control to the kernel. Kernel entry point is at 0x80404b00 Initializing cgroup subsys cpuset Linux version 2.6.24-1-sb1-bcm91250a (Debian 2.6.24-4) (wa...@debian.org) (gcc version 4.1.3 20071208 console [early0] enabled CPU revision is: 01040102 (SiByte SB1) FPU revision is: 000f0102 Broadcom SiByte BCM1250 B2 @ 800 MHz (SB1 rev 2) Board type: SiByte BCM91250A (SWARM) This kernel optimized for board runs with CFE Determined physical RAM map: memory: 0fe48e00 @ (usable) memory: 0e00 @ 8000 (usable) Initrd not found or empty - disabling initrd Zone PFN ranges: DMA32 0 - 1048576 Normal1048576 - 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0:0 -65096 0: 524288 - 589823 Detected 1 available secondary CPU(s) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 122568 Kernel command line: root=/dev/hda3 console=duart0 Primary instruction cache 32kB, VIVT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Synthesized TLB refill handler (45 instructions). Synthesized TLB load handler fastpath (59 instructions). Synthesized TLB store handler fastpath (54 instructions). Synthesized TLB modify handler fastpath (53 instructions). PID hash table entries: 2048 (order: 11, 16384 bytes) Console: colour dum7���ͽ���handover: boot [early0] - real [duart0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Memory: 483204k/522524k available (3114k kernel code, 38732k reserved, 930k data, 196k init, 0k high) Security Framework initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Checking for the multiply/shift bug... no. Checking for the daddi bug... no. Checking for the daddiu bug... no. CPU revision is: 03040102 (SiByte SB1) FPU revision is: 000f0102 Primary instruction cache 32kB, VIVT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Synthesized TLB refill handler (45 instructions). Brought up 2 CPUs net_namespace: 120 bytes NET: Registered protocol family 16 registering PCI controller with io_map_base unset NET: Registered protocol family 2 Time: bcm1250-counter-3 clocksource has been installed. IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered audit: initializing netlink socket (disabled) audit(1203668933.428:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 o...@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) duart0 at MMIO 0x10060100 (irq = 8) is a SB1250 DUART duart1 at MMIO 0x10060200 (irq = 9) is a SB1250 DUART RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SWARM IDE driver ide-swarm: IDE interface at GenBus slot 4 hda: MAXTOR 6L040J2, ATA DISK drive ide0 at 0x9000100b3e00-0x9000100b3e07,0x9000100b7ec0 on irq 36 hda: max request size: 128KiB hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM
Bug#548090: marked as done ([amd64-agp] BUG: unable to handle kernel NULL pointer dereference)
Your message dated Tue, 18 May 2010 14:22:55 + with message-id e1oenh9-0002ft...@ries.debian.org and subject line Bug#548090: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #548090, regarding [amd64-agp] BUG: unable to handle kernel NULL pointer dereference to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 548090: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=548090 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: x11-common Version: 1:7.4+4 Severity: grave Justification: renders package unusable With this last update of x11-common package and dependencies, I've got color problems and no keyboard in a x session. lspci |grep VGA 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter To resolve the problem, I had to add a lenny cdrom in my sources.list, delete x11-common and xserver-* and dependencies, and reinstall t$ But, I cannot make a normal dist-upgrade now. I have to create an apt preference file until a new update. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.30-1-686 (SMP w/1 CPU core) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages x11-common depends on: ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy ii debianutils 3.2.1 Miscellaneous utilities specific t ii lsb-base 3.2-23 Linux Standard Base 3.2 init scrip x11-common recommends no packages. x11-common suggests no packages. -- debconf information: x11-common/xwrapper/nice_value: 0 x11-common/xwrapper/allowed_users: Console Users Only x11-common/xwrapper/actual_allowed_users: console x11-common/xwrapper/nice_value/error: x11-common/x11r6_bin_not_empty: x11-common/upgrade_issues: ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb
Bug#404951: marked as done (linux-2.6: sb1-bcm91250a kernel does not boot)
Your message dated Tue, 18 May 2010 14:22:54 + with message-id e1oenh8-0002fn...@ries.debian.org and subject line Bug#466977: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #466977, regarding linux-2.6: sb1-bcm91250a kernel does not boot to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 466977: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=466977 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: installation-reports Severity: grave Boot method: netboot Image version: daily build 2006-12-27, http://people.debian.org/~ths/d-i/mips/images/daily/sb1-bcm91250a/netboot/ Date: 2006-12-29 Machine: Broadcom BCM91250a SWARM, mips/big-endian mode, 256MB RAM, serial console, IDE disk Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [E] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [ ] User/password setup:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: == Sibyl (the bootloader) starts, loads the kernel and the initrd, jumps into the kernel and the system freezes. Boot log: = CFE boot -tftp 192.168.2.14:/tftpboot/swarm-daily/sibyl Loader:raw Filesys:tftp Dev:eth0 File:192.168.2.14:/tftpboot/swarm-daily/sibyl Options:(null) Loading: ... 130116 bytes read Entry at 0x2000 Closing network. Starting program at 0x2000 SiByte Loader, version 2.4.2 Built on Oct 4 2005 Network device 'eth0' configured Getting configuration file tftp:192.168.2.14:/tftpboot/swarm-daily/sibyl.conf... Config file retrieved. Available configurations: install rescue Boot which configuration [install]: Loading kernel (ELF64): 4391...@0x8010 done Loading ramdisk at 0x8057e000...3622876 bytes loaded Set up command line arguments to: root=/dev/ram console=duart0 ramdisk_size=3576 rd_start=0x8057E000 rd_size=0x3747DC Setting up initial prom_init arguments Cleaning up state... Transferring control to the kernel. Kernel entry point is at 0x804f7000 Broadcom SiByte BCM1250 B2 @ 800 MHz (SB1 rev 2) Board type: SiByte BCM91250A (SWARM) Regards, Karsten -- #include standard_disclaimer Nach Paragraph 28 Abs. 3 Bundesdatenschutzgesetz widerspreche ich der Nutzung oder Uebermittlung meiner Daten fuer Werbezwecke oder fuer die Markt- oder Meinungsforschung. ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to
Bug#562486: marked as done (linux-2.6: please enable tomoyo)
Your message dated Tue, 18 May 2010 14:22:56 + with message-id e1oenha-0002fz...@ries.debian.org and subject line Bug#562486: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #562486, regarding linux-2.6: please enable tomoyo to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 562486: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=562486 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Severity: wishlist Hi, it would be nice to have tomoyo enabled, userspace tools are in the archive already. thanks, filippo -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.31-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-libc-dev_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-libc-dev_2.6.32-13_amd64.deb linux-manual-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-manual-2.6.32_2.6.32-13_all.deb linux-patch-debian-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-13_all.deb linux-source-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-source-2.6.32_2.6.32-13_all.deb linux-support-2.6.32-5_2.6.32-13_all.deb to main/l/linux-2.6/linux-support-2.6.32-5_2.6.32-13_all.deb xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb A summary of the changes between this version and the previous one is attached. Thank you for
Bug#566522: marked as done (linux-image-2.6.32-trunk-486: eth0 silently disapear after upgrading from 2.6.30 to 2.6.32-trunk (3c503))
Your message dated Tue, 18 May 2010 14:22:57 + with message-id e1oenhb-0002g5...@ries.debian.org and subject line Bug#566522: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #566522, regarding linux-image-2.6.32-trunk-486: eth0 silently disapear after upgrading from 2.6.30 to 2.6.32-trunk (3c503) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 566522: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=566522 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.32-5 Severity: important ifconfig don't see eth0, dhclient fail and internet connection disapear without any error for googling :( -- Package-specific info: ** Version: Linux version 2.6.32-trunk-486 (Debian 2.6.32-5) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 Sun Jan 10 05:53:18 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-486 root=UUID=27a15c89-8b23-4a95-a869-d86abaee49ef ro quiet ** Not tainted ** Kernel log: [2.104667] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [2.105029] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [2.106610] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [2.107346] 00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [2.108468] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 [2.108986] serio: i8042 KBD port at 0x60,0x64 irq 1 [2.109025] serio: i8042 AUX port at 0x60,0x64 irq 12 [2.109854] mice: PS/2 mouse device common for all mice [2.109977] Driver 'rtc_cmos' needs updating - please use bus_type methods [2.110543] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [2.110608] rtc0: alarms up to one day, 114 bytes nvram [2.110875] EISA: Probing bus 0 at eisa.0 [2.110928] Cannot allocate resource for EISA slot 5 [2.110959] EISA: Detected 0 cards. [2.110974] cpuidle: using governor ladder [2.110985] cpuidle: using governor menu [2.111011] No iBFT detected. [2.113173] TCP cubic registered [2.115119] NET: Registered protocol family 10 [2.117941] lo: Disabled Privacy Extensions [2.119567] Mobile IPv6 [2.119586] NET: Registered protocol family 17 [2.119646] Using IPI Shortcut mode [2.120531] registered taskstats version 1 [2.121046] rtc_cmos 00:03: setting system clock to 2010-01-23 17:18:48 UTC (1264267128) [2.121292] Freeing unused kernel memory: 436k freed [2.126361] Write protecting the kernel text: 2260k [2.126458] Write protecting the kernel read-only data: 848k [2.139997] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [3.797244] Linux agpgart interface v0.103 [3.876992] Uniform Multi-Platform E-IDE driver [3.920709] agpgart: Detected VIA Apollo MVP3 chipset [3.930178] FDC 0 is a post-1991 82077 [3.937462] agpgart-via :00:00.0: AGP aperture is 64M @ 0xe000 [3.938867] via82cxxx :00:07.1: VIA vt82c586b (rev 47) IDE UDMA33 [3.938895] via82cxxx :00:07.1: IDE controller (0x1106:0x0571 rev 0x06) [3.938951] via82cxxx :00:07.1: IDE port disabled [3.939027] via82cxxx :00:07.1: not 100% native mode: will probe irqs later [3.939054] ide0: BM-DMA at 0xe000-0xe007 [3.939106] Probing IDE interface ide0... [4.056912] usbcore: registered new interface driver usbfs [4.058193] usbcore: registered new interface driver hub [4.059578] usbcore: registered new device driver usb [4.096239] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [4.124042] uhci_hcd: USB Universal Host Controller Interface driver [4.272573] hda: SAMSUNG SV1021H, ATA DISK drive [4.776537] hdb: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive [4.776807] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [4.776905] hda: UDMA/33 mode selected [4.777000] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [4.777258] hdb: UDMA/33 mode selected [4.777589] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4.779054] uhci_hcd :00:07.2: UHCI Host Controller [4.779198] uhci_hcd :00:07.2: new USB bus registered, assigned bus number 1 [4.779283] uhci_hcd :00:07.2: irq 11, io base 0xe400 [4.779607] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [4.779624] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [4.779638] usb usb1: Product: UHCI Host Controller [4.779650] usb usb1: Manufacturer: Linux 2.6.32-trunk-486 uhci_hcd [4.779663] usb usb1: SerialNumber: :00:07.2 [4.781020] usb
Bug#572842: marked as done (linux-2.6: Clickpad style trackpads as the ones found in an HP Envy 15 are not supported)
Your message dated Tue, 18 May 2010 14:23:00 + with message-id e1oenhe-0002gf...@ries.debian.org and subject line Bug#572842: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #572842, regarding linux-2.6: Clickpad style trackpads as the ones found in an HP Envy 15 are not supported to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 572842: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=572842 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.33 Severity: wishlist Tags: patch Takeshi Iwai made a patch to improve support with these device (so they support left, right and middle buttons). The patch itself is located at http://patchwork.kernel.org/patch/67335/ It applies cleanly to 2.6.33. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (300, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.33-2-amd64 (SMP w/8 CPU cores) Locale: LANG=es_AR.UTF-8, LC_CTYPE=es_AR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 05689e7..b2db417 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -327,6 +327,45 @@ static void synaptics_pt_create(struct psmouse *psmouse) * Functions to interpret the absolute mode packets / +/* left and right clickpad button ranges; + * the gap between them is interpreted as a middle-button click + */ +#define CLICKPAD_LEFT_BTN_X \ + ((XMAX_NOMINAL - XMIN_NOMINAL) * 2 / 5 + XMIN_NOMINAL) +#define CLICKPAD_RIGHT_BTN_X \ + ((XMAX_NOMINAL - XMIN_NOMINAL) * 3 / 5 + XMIN_NOMINAL) + +/* handle clickpad events */ +static void clickpad_process_packet(struct synaptics_data *priv, +struct synaptics_hw_state *hw) +{ + /* clickpad mode reports Y range from 0 to YMAX_NOMINAL, + * where the area Y YMIN_NOMINAL is used as click buttons + */ + if (hw-y YMIN_NOMINAL) { + /* button area */ + hw-z = 0; /* don't move pointer */ + /* clickpad reports only the middle button, and we need + * to fake left/right buttons depending on the touch position + */ + if (hw-middle) { /* clicked? */ + hw-middle = 0; + if (hw-x CLICKPAD_LEFT_BTN_X) +hw-left = 1; + else if (hw-x CLICKPAD_RIGHT_BTN_X) +hw-right = 1; + else +hw-middle = 1; + } + } else if (hw-middle) { + /* dragging */ + hw-left = priv-prev_hw.left; + hw-right = priv-prev_hw.right; + hw-middle = priv-prev_hw.middle; + } + priv-prev_hw = *hw; +} + static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data *priv, struct synaptics_hw_state *hw) { memset(hw, 0, sizeof(struct synaptics_hw_state)); @@ -407,6 +446,9 @@ static void synaptics_process_packet(struct psmouse *psmouse) synaptics_parse_hw_state(psmouse-packet, priv, hw); + if (SYN_CAP_CLICKPAD(priv-ext_cap)) + clickpad_process_packet(priv, hw); + if (hw.scroll) { priv-scroll += hw.scroll; @@ -701,6 +743,12 @@ int synaptics_init(struct psmouse *psmouse) SYN_ID_MAJOR(priv-identity), SYN_ID_MINOR(priv-identity), priv-model_id, priv-capabilities, priv-ext_cap); + if (SYN_CAP_CLICKPAD(priv-ext_cap)) { + printk(KERN_INFO Synaptics: Clickpad mode enabled\n); + /* force to enable the middle button */ + priv-capabilities |= (1 18); + } + set_input_params(psmouse-dev, priv); /* diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 838e7f2..76df393 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -48,6 +48,8 @@ #define SYN_CAP_VALID(c) c) 0x00ff00) 8) == 0x47) #define SYN_EXT_CAP_REQUESTS(c) (((c) 0x70) 20) #define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) 0x00f000) 12) +#define SYN_CAP_PRODUCT_ID(ec) (((ec) 0xff) 16) +#define SYN_CAP_CLICKPAD(ec) (SYN_CAP_PRODUCT_ID(ec) == 0xe4) /* synaptics modes query bits */ #define SYN_MODE_ABSOLUTE(m) ((m) (1 7)) @@ -103,6 +105,7 @@ struct synaptics_data { unsigned char pkt_type; /* packet type - old, new, etc */ unsigned char mode; /* current mode byte */ int scroll; + struct synaptics_hw_state prev_hw; }; void synaptics_module_init(void); ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to
Bug#577227: marked as done (linux-2.6: [INTL:pt] Updated Portuguese translation for debconf messages)
Your message dated Tue, 18 May 2010 14:23:04 + with message-id e1oenhi-0002gl...@ries.debian.org and subject line Bug#577227: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #577227, regarding linux-2.6: [INTL:pt] Updated Portuguese translation for debconf messages to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 577227: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=577227 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.32-11 Tags: l10n, patch Severity: wishlist Updated Portuguese translation for linux-2.6's debconf messages. Translator: Américo Monteiro a_monte...@netcabo.pt Feel free to use it. For translation updates please contact 'Last Translator' or the Portuguese Translation Team traduz at debianpt.org. -- Best regards, Américo Monteiro Traduz - Portuguese Translation Team http://www.DebianPT.org # Translation of linux-2.6 debconf messages to Portuguese # Copyright (C) 2010 the linux-2.6's copyright holder # This file is distributed under the same license as the linux-2.6 package. # # Américo Monteiro a_monte...@netcabo.pt, 2010. msgid msgstr Project-Id-Version: linux-2.6 2.6.32-11\n Report-Msgid-Bugs-To: linux-...@packages.debian.org\n POT-Creation-Date: 2010-03-29 14:15+0100\n PO-Revision-Date: 2010-04-10 16:35+0100\n Last-Translator: Américo Monteiro a_monte...@netcabo.pt\n Language-Team: Portuguese tra...@debianpt.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Generator: Lokalize 1.0\n Plural-Forms: nplurals=2; plural=(n != 1);\n #. Type: boolean #. Description #: ../linux-base.templates:1001 msgid Update disk device ids in system configuration? msgstr Actualizar os ids dos dispositivos de disco na configuração do sistema? #. Type: boolean #. Description #: ../linux-base.templates:1001 msgid The new Linux kernel version provides different drivers for some PATA (IDE) controllers. The names of some hard disk, CD-ROM and tape devices may change. msgstr A nova versão de kernel Linux disponibiliza drivers diferentes para alguns controladores PATA (IDE). Os nomes de alguns discos rígidos, CD-ROM e dispositivos de fita magnética poderão mudar. #. Type: boolean #. Description #: ../linux-base.templates:1001 msgid You are recommended to identify disk devices in configuration files by label or UUID (unique identifier) rather than by device name, which will work with both old and new kernel versions. Your system configuration can be updated automatically in most cases. msgstr É-lhe recomendado identificar os dispositivos de discos nos ficheiros de configuração pela etiqueta ou UUID (identificador único) em vez do nome de dispositivo, o qual irá funcionar com ambas versões de kernel antiga e nova. Na maioria dos casos a configuração do seu sistema pode ser actualizada automaticamente. #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:2001 ../linux-base.templates:3001 msgid Apply these configuration changes to disk device ids? msgstr Aplicar estas alterações de configuração aos ids de dispositivos de discos? #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid These devices will be assigned UUIDs or labels: msgstr A estes dispositivos serão atribuídos UUIDs ou etiquetas: #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid ${relabel} msgstr ${relabel} #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:2001 ../linux-base.templates:3001 msgid These configuration files will be updated: msgstr Estes ficheiros de configuração irão ser actualizados: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:2001 ../linux-base.templates:3001 msgid ${files} msgstr ${files} #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:2001 ../linux-base.templates:3001 msgid The device ids will be changed as follows: msgstr Os ids de dispositivos irão ser alterados de acordo com o seguinte: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:2001 ../linux-base.templates:3001 msgid ${id_map} msgstr ${id_map} #. Type: note #. Description #: ../linux-base.templates:4001 msgid Please check these configuration files before rebooting msgstr Por favor verifique estes ficheiros de configuração antes de reiniciar o sistema #. Type: note #. Description #: ../linux-base.templates:4001 msgid These configuration files still use some device names that
Bug#578129: marked as done (please apply skip sense logging for some ATA PASS-THROUGH cdbs from 2.6.33)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002gq...@ries.debian.org and subject line Bug#578129: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #578129, regarding please apply skip sense logging for some ATA PASS-THROUGH cdbs from 2.6.33 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 578129: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=578129 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.32-11 Severity: normal Tags: patch hi, when SATA drives are attached to SAS controllers and used in ATA pass-through mode, many operations cause alarming but harmless messages (though it may not be immediately obvious to the user that they are harmless) to be written to the kernel log, e.g.: [1381579.095459] sd 8:0:23:0: [sdx] Sense Key : Recovered Error [current] [descriptor] [1381579.095518] Descriptor sense data with sense descriptors (in hex): [1381579.095549] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00 [1381579.095614] 00 4f 00 c2 00 50 [1381579.095654] sd 8:0:23:0: [sdx] Add. Sense: ATA pass through information available i see these types of messages at boot as well as periodically due to the use of smartmontools. if you have a lot of disks your kernel log will be spammed. can you apply commit e7efe5932b1d3916c79326a4221693ea90a900e2 from 2.6.33 to suppress these messages? thanks. -- Robert Edmonds edmo...@debian.org From e7efe5932b1d3916c79326a4221693ea90a900e2 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert dgilb...@interlog.com Date: Sun, 3 Jan 2010 13:51:15 -0500 Subject: [PATCH] [SCSI] skip sense logging for some ATA PASS-THROUGH cdbs Further to the lsml thread titled: does scsi_io_completion need to dump sense data for ata pass through (ck_cond = 1) ? This is a patch to skip logging when the sense data is associated with a SENSE_KEY of RECOVERED_ERROR and the additional sense code is ATA PASS-THROUGH INFORMATION AVAILABLE. This only occurs with the SAT ATA PASS-THROUGH commands when CK_COND=1 (in the cdb). It indicates that the sense data contains ATA registers. Smartmontools uses such commands on ATA disks connected via SAT. Periodic checks such as those done by smartd cause nuisance entries into logs that are: - neither errors nor warnings - pointless unless the cdb that caused them are also logged Signed-off-by: Douglas Gilbert dgilb...@interlog.com Signed-off-by: James Bottomley james.bottom...@suse.de --- drivers/scsi/scsi_lib.c | 10 -- 1 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index c664242..5697709 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -773,8 +773,14 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) * we already took a copy of the original into rq-errors which * is what gets returned to the user */ - if (sense_valid sshdr.sense_key == RECOVERED_ERROR) { - if (!(req-cmd_flags REQ_QUIET)) + if (sense_valid (sshdr.sense_key == RECOVERED_ERROR)) { + /* if ATA PASS-THROUGH INFORMATION AVAILABLE skip + * print since caller wants ATA registers. Only occurs on + * SCSI ATA PASS_THROUGH commands when CK_COND=1 + */ + if ((sshdr.asc == 0x0) (sshdr.ascq == 0x1d)) + ; + else if (!(req-cmd_flags REQ_QUIET)) scsi_print_sense(, cmd); result = 0; /* BLOCK_PC may have set error */ -- 1.7.0.4 signature.asc Description: Digital signature ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to
Bug#578349: marked as done (linux-2.6: [debconf_rewrite] Debconf templates and debian/control review)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002gv...@ries.debian.org and subject line Bug#578349: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #578349, regarding linux-2.6: [debconf_rewrite] Debconf templates and debian/control review to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 578349: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=578349 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: N/A Severity: normal Tags: patch Dear Debian maintainer, On Monday, April 19, 2010, I notified you of the beginning of a review process concerning debconf templates for linux-2.6. The debian-l10n-english contributors have now reviewed these templates, and the proposed changes are attached to this bug report. Please review the suggested changes, and if you have any objections, let me know in the next 3 days. However, please try to avoid uploading linux-2.6 with these changes right now. The second phase of this process will begin on Thursday, April 22, 2010, when I will coordinate updates to translations of debconf templates. The existing translators will be notified of the changes: they will receive an updated PO file for their language. Simultaneously, a general call for new translations will be sent to the debian-i18n mailing list. Both these calls for translations will request updates to be sent as individual bug reports. That will probably trigger a lot of bug reports against your package, but these should be easier to deal with. The call for translation updates and new translations will run until about Thursday, May 13, 2010. Please avoid uploading a package with fixed or changed debconf templates and/or translation updates in the meantime. Of course, other changes are safe. Please note that this is an approximative delay, which depends on my own availability to process this work and is influenced by the fact that I simultaneously work on many packages. Around Friday, May 14, 2010, I will contact you again and will send a final patch summarizing all the updates (changes to debconf templates, updates to debconf translations and new debconf translations). Again, thanks for your attention and cooperation. --- linux-2.6.old/debian/linux-base.templates 2010-03-31 07:33:05.952958142 +0200 +++ linux-2.6/debian/linux-base.templates 2010-04-19 07:12:17.707893653 +0200 @@ -1,20 +1,34 @@ +# These templates have been reviewed by the debian-l10n-english +# team +# +# If modifications/additions/rewording are needed, please ask +# debian-l10n-engl...@lists.debian.org for advice. +# +# Even minor modifications require translation updates and such +# changes should be coordinated with translators and reviewers. + Template: linux-base/disk-id-convert-auto Type: boolean Default: true -_Description: Update disk device ids in system configuration? - The new Linux kernel version provides different drivers for some - PATA (IDE) controllers. The names of some hard disk, CD-ROM and - tape devices may change. +_Description: Update disk device IDs in system configuration? + + The new Linux kernel version provides different drivers for some PATA + (IDE) controllers. The names of some hard disk, CD-ROM, and tape + devices may change. . - You are recommended to identify disk devices in configuration files + It is now recommended to identify disk devices in configuration files by label or UUID (unique identifier) rather than by device name, - which will work with both old and new kernel versions. Your system - configuration can be updated automatically in most cases. + which will work with both old and new kernel versions. + . + If you choose to not update the system configuration automatically, + you must update device IDs yourself before the next system reboot or + the system may become unbootable. Template: linux-base/disk-id-convert-plan Type: boolean Default: true -_Description: Apply these configuration changes to disk device ids? +#flag:translate!:3,5,7 +_Description: Apply configuration changes to disk device IDs? These devices will be assigned UUIDs or labels: . ${relabel} @@ -23,38 +37,41 @@ . ${files} . - The device ids will be changed as follows: + The device IDs will be changed as follows: . ${id_map} Template: linux-base/disk-id-convert-plan-no-relabel Type: boolean Default: true -_Description: Apply these configuration changes to disk device ids? +#flag:translate!:3,5 +_Description: Apply configuration changes to disk device IDs? These configuration files will be
Bug#578994: marked as done (linux-2.6: [INTL:ru] Russian debconf templates translation)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002h0...@ries.debian.org and subject line Bug#578994: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #578994, regarding linux-2.6: [INTL:ru] Russian debconf templates translation to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 578994: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=578994 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: new Severity: wishlist Tags: l10n patch Russian debconf templates translation is attached. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-3-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash # translation of ru.po to Russian # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # # Yuri Kozlov yu...@komyakino.ru, 2010. msgid msgstr Project-Id-Version: linux-2.6 new\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2010-04-23 22:14+0200\n PO-Revision-Date: 2010-04-24 10:31+0400\n Last-Translator: Yuri Kozlov yu...@komyakino.ru\n Language-Team: Russian debian-l10n-russ...@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Generator: KBabel 1.11.4\n Plural-Forms: nplurals=3; plural=(n%10==1 n%100!=11 ? 0 : n%10=2 n%10=4 (n%10010 || n%100=20) ? 1 : 2);\n #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid Update disk device IDs in system configuration? msgstr Обновить ID дисковых устройств в настройках системы? #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid The new Linux kernel version provides different drivers for some PATA (IDE) controllers. The names of some hard disk, CD-ROM, and tape devices may change. msgstr Новая версия ядра Linux предоставляет другие драйверы для некоторых контроллеров PATA (IDE), в следствие чего могут измениться имена некоторых жёстких дисков, CD-ROM и ленточных накопителей. #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid It is now recommended to identify disk devices in configuration files by label or UUID (unique identifier) rather than by device name, which will work with both old and new kernel versions. msgstr Теперь рекомендуется указывать дисковые устройства в файлах настроек в виде меток и UUID (уникальных идентификаторов), а не имён устройств. Это будет работать и в старых и в новых версиях ядер. #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid If you choose to not update the system configuration automatically, you must update device IDs yourself before the next system reboot or the system may become unbootable. msgstr Если вы не выберете автоматическое обновление системных настроек, то должны обновить ID устройств самостоятельно до следующей перезагрузки, иначе система не запустится. #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid Apply configuration changes to disk device IDs? msgstr Применить изменение настроек для ID дисковых устройств? #. Type: boolean #. Description #: ../linux-base.templates:3001 msgid These devices will be assigned UUIDs or labels: msgstr Следующим устройствам будут назначены UUID или метки: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid These configuration files will be updated: msgstr Следующие файлы настройки будут обновлены: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid The device IDs will be changed as follows: msgstr ID устройств будут изменены следующим образом: #. Type: error #. Description #: ../linux-base.templates:5001 msgid Configuration files still contain deprecated device names msgstr Файлы настройки всё ещё содержат устаревшие имена устройств #. Type: error #. Description #: ../linux-base.templates:5001 msgid The following configuration files still use some device names that may change when using the new kernel: msgstr В следующих файлах настройки всё ещё используются некоторые имена устройств, которые могут измениться при использовании нового ядра: #. Type: error #. Description #: ../linux-base.templates:6001 msgid Boot loader configuration check needed msgstr Требуется проверка
Bug#579019: marked as done (linux-2.6: Estonian translation for debconf)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002h5...@ries.debian.org and subject line Bug#579019: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #579019, regarding linux-2.6: Estonian translation for debconf to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 579019: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579019 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Severity: wishlist Tags: patch l10n -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I have translated debconf messages to Estonian. - -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.33.2-k7-ck (SMP w/1 CPU core; PREEMPT) Locale: LANG=et_EE.UTF-8, LC_CTYPE=et_EE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) iEYEARECAAYFAkvS12QACgkQ2jT3PWjFNx6DwgCeOzKDE+LcEbuw6AtUhYzAWR4G 8EsAmQFqGmkc7L6tNONfEL/XUzFyrwX8 =YTLn -END PGP SIGNATURE- # linux-2.6-debconf estonian translation # linux-2.6-debconf eesti keele tõlge # Copyright (C) 2010 Debian GNU/Linux # This file is distributed under the same license as the PACKAGE package. # # mihkel mihkel turakas com, 2010. # msgid msgstr Project-Id-Version: linux-2.6 2.6.32-11\n Report-Msgid-Bugs-To: linux-...@packages.debian.org\n POT-Creation-Date: 2010-04-23 22:14+0200\n PO-Revision-Date: 2010-04-24 14:20+0300\n Last-Translator: mihkel turakas gmail com\n Language-Team: Estonian e...@li.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Generator: Emacs\n Plural-Forms: nplurals=2; plural=(n != 1);\n #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid Update disk device IDs in system configuration? msgstr Värskenda süsteemi seadetes ketta seadmete ID-d? #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid The new Linux kernel version provides different drivers for some PATA (IDE) controllers. The names of some hard disk, CD-ROM, and tape devices may change. msgstr Uus Linuxi tuuma versioon pakub teistsuguseid nimesid mõnedele PATA (IDE) kontrolleritele. Osade kõvaketaste, CD-ROM-de ja lindiseadete nimed võivad muutuda. #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid It is now recommended to identify disk devices in configuration files by label or UUID (unique identifier) rather than by device name, which will work with both old and new kernel versions. msgstr Nüüdsest on soovituslik konfiguratsioonifailides identifitseerida kettaid siltide või UUID (unikaalne idendifikaator) järgi, mitte seadme nime järgi. Nii töötavad nad nii vanade kui ka uute tuumadega. #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid If you choose to not update the system configuration automatically, you must update device IDs yourself before the next system reboot or the system may become unbootable. msgstr Kui valid mitte automaatselt uuendada süsteemi konfiguratsiooni, siis pead ise käsitsi muutma seadmete ID-d enne järgmist taaskäivitust või süsteem ei käivitu enam. #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid Apply configuration changes to disk device IDs? msgstr Rakenda ketta seadmete ID-de konfiratsiooni muudatused? #. Type: boolean #. Description #: ../linux-base.templates:3001 msgid These devices will be assigned UUIDs or labels: msgstr Nendele seadmetele määratakse UUID-d või sildid: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid These configuration files will be updated: msgstr Need konfiguratsioonifailid uuendatakse: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid The device IDs will be changed as follows: msgstr Seadme ID-d muudetakse järgnevalt: #. Type: error #. Description #: ../linux-base.templates:5001 msgid Configuration files still contain deprecated device names msgstr Konfiguratsioonifailid sisaldavad ikka iganenud seadmete nimesid #. Type: error #. Description #: ../linux-base.templates:5001 msgid The following configuration files still use some device names that may change when using the new kernel: msgstr Järgnevad konfiguratsioonifailid sisaldavad ikka seadmete nimesid, mis võivad uue tuumaga muutuda: #. Type: error #. Description #:
Bug#579268: marked as done ([l10n:cs] Initial Czech translation of PO debconf template for package linux-2.6)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002hf...@ries.debian.org and subject line Bug#579268: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #579268, regarding [l10n:cs] Initial Czech translation of PO debconf template for package linux-2.6 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 579268: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579268 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: N/A Severity: wishlist Tags: l10n, patch In attachment there is initial Czech translation of PO debconf template (cs.po) for package linux-2.6, please include it. Best regards -- Michal Šimůnek # Czech PO debconf template translation of linux-2.6. # Copyright (C) 2010 Michal Simunek michal.simu...@gmail.com # This file is distributed under the same license as the linux-2.6 package. # Michal Simunek michal.simu...@gmail.com, 2010. # msgid msgstr Project-Id-Version: linux-2.6\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2010-04-23 16:36+0200\n PO-Revision-Date: 2010-04-26 18:02+0200\n Last-Translator: Michal Simunek michal.simu...@gmail.com\n Language-Team: Czech debian-l10n-cz...@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=utf-8\n Content-Transfer-Encoding: 8bit\n #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid Update disk device IDs in system configuration? msgstr Aktualizovat v nastavení systému ID diskových zařízení? #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:4001 ../linux-base.templates:5001 msgid Apply configuration changes to disk device IDs? msgstr Použít změny v nastavení ID diskových zařízení? #. Type: boolean #. Description #: ../linux-base.templates:4001 msgid These devices will be assigned UUIDs or labels: msgstr Těmto zařízením bude přiřazeno UUID či popisek: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:4001 ../linux-base.templates:5001 msgid These configuration files will be updated: msgstr Tyto konfigurační soubory budou aktualizovány: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:4001 ../linux-base.templates:5001 msgid The device IDs will be changed as follows: msgstr ID diskových zařízení se změní následovně: #. Type: error #. Description #: ../linux-base.templates:6001 msgid Configuration files still contain deprecated device names msgstr Konfigurační soubory stále obsahují zastaralé názvy zařízení #. Type: error #. Description #: ../linux-base.templates:6001 msgid The following configuration files still use some device names that may change when using the new kernel: msgstr Následující konfigurační soubory stále používají názvy zařízení, které je při používání nového jádra třeba změnit: #. Type: error #. Description #: ../linux-base.templates:7001 msgid Boot loader configuration check needed msgstr Je vyžadováno ověření nastavení zavaděče #. Type: error #. Description #: ../linux-base.templates:7001 msgid The boot loader configuration for this system was not recognized. These settings in the configuration may need to be updated: msgstr Nastavení zavaděče v tomto systému nebylo rozpoznáno. Tato nastavení může být nutné aktualizovat: #. Type: error #. Description #: ../linux-base.templates:7001 msgid * The root device ID passed as a kernel parameter;\n * The boot device ID used to install and update the boot loader. msgstr * ID kořenového zařízení předané jako parametr jádra;\n * ID zaváděcího zařízení k instalaci a aktualizaci zavaděče. #. Type: error #. Description #: ../linux-base.templates:7001 msgid You should generally identify these devices by UUID or label. However, on MIPS systems the root device must be identified by name. msgstr Tato zařízení bysta běžně měli označovat jejich UUID či popiskem. Na systémech MIPS však musí být kořenové zařízení označeno názvem. #. Type: boolean #. Description #: ../templates/temp.image.plain/templates:2001 msgid Abort installation after depmod error? msgstr Přerušit po chybě depmod instalaci? #. Type: boolean #. Description #: ../templates/temp.image.plain/templates:2001 msgid The 'depmod' command exited with the exit code ${exit_value} (${SIGNAL} ${CORE}). msgstr Příkaz 'depmod' skončil s chybou ${exit_value} (${SIGNAL}${CORE}). #. Type: boolean #. Description #: ../templates/temp.image.plain/templates:2001 msgid Since this image uses initrd, the ${modules_base}/=V/modules.dep file will not be deleted, even though it may be
Bug#579308: marked as done ([INTL:sv] Swedish strings for linux-2.6 debconf)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002hk...@ries.debian.org and subject line Bug#579308: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #579308, regarding [INTL:sv] Swedish strings for linux-2.6 debconf to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 579308: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579308 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- package: linux-2.6 severity: wishlist tags: patch l10n Please consider to add this file to translation of debconf. -- brother http://sis.bthstuden.se sv.po Description: Binary data ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-libc-dev_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-libc-dev_2.6.32-13_amd64.deb linux-manual-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-manual-2.6.32_2.6.32-13_all.deb linux-patch-debian-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-13_all.deb linux-source-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-source-2.6.32_2.6.32-13_all.deb linux-support-2.6.32-5_2.6.32-13_all.deb to main/l/linux-2.6/linux-support-2.6.32-5_2.6.32-13_all.deb xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 579...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. maximilian attems m...@debian.org
Bug#579763: marked as done (linux-2.6: [INTL:fr] French debconf templates translation)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002hp...@ries.debian.org and subject line Bug#579763: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #579763, regarding linux-2.6: [INTL:fr] French debconf templates translation to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 579763: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579763 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: N/A Severity: wishlist Tags: l10n patch Please find attached the French debconf templates translation, proofread by the debian-l10n-french mailing list contributors. This file should be put as debian/po/fr.po in your package build tree. Regards David fr.po.gz Description: GNU Zip compressed data signature.asc Description: OpenPGP digital signature ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-libc-dev_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-libc-dev_2.6.32-13_amd64.deb linux-manual-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-manual-2.6.32_2.6.32-13_all.deb linux-patch-debian-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-13_all.deb linux-source-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-source-2.6.32_2.6.32-13_all.deb linux-support-2.6.32-5_2.6.32-13_all.deb to main/l/linux-2.6/linux-support-2.6.32-5_2.6.32-13_all.deb xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you
Bug#579864: marked as done ([I18N, DE] linux-2.6: updated german debconf translation)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002hu...@ries.debian.org and subject line Bug#579864: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #579864, regarding [I18N, DE] linux-2.6: updated german debconf translation to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 579864: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579864 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Severity: wishlist, patch Attached you will find the updated german debconf translation for linux-2.6. Greetings Holger -- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Created with Sylpheed 2.5.0 under DEBIAN GNU/LINUX 5.0.0 - L e n n y Registered LinuxUser #311290 - http://counter.li.org/ = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = linux-2.6_de.po.gz Description: Binary data ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-libc-dev_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-libc-dev_2.6.32-13_amd64.deb linux-manual-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-manual-2.6.32_2.6.32-13_all.deb linux-patch-debian-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-13_all.deb linux-source-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-source-2.6.32_2.6.32-13_all.deb linux-support-2.6.32-5_2.6.32-13_all.deb to main/l/linux-2.6/linux-support-2.6.32-5_2.6.32-13_all.deb xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb A summary of the changes between this version and the previous one is attached.
Bug#580467: marked as done (linux-base linux-image-2.6.32-5-686 post-install: ... uninitialized value $label_len ...)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002hz...@ries.debian.org and subject line Bug#580467: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #580467, regarding linux-base linux-image-2.6.32-5-686 post-install: ... uninitialized value $label_len ... to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580467: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580467 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-base Version: 2.6.32-12 Severity: important Current version won't install here: % apt-get install linux-base Reading package lists... Done Building dependency tree Reading state information... Done linux-base is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 240 not upgraded. 3 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up linux-base (2.6.32-12) ... Use of uninitialized value $label_len in numeric gt () at /var/lib/dpkg/info/linux-base.postinst line 1338. Use of uninitialized value $label_len in subtraction (-) at /var/lib/dpkg/info/linux-base.postinst line 1339. Logical sector size (20487 bytes) is not a multiple of the physical sector size. dosfslabel failed: 256 at /var/lib/dpkg/info/linux-base.postinst line 1042, STDIN line 10. dpkg: error processing linux-base (--configure): subprocess installed post-installation script returned error exit status 9 dpkg: dependency problems prevent configuration of linux-image-2.6.32-5-686: linux-image-2.6.32-5-686 depends on linux-base (= 2.6.32-12); however: Package linux-base is not configured yet. dpkg: error processing linux-image-2.6.32-5-686 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-image-2.6-686: linux-image-2.6-686 depends on linux-image-2.6.32-5-686; however: Package linux-image-2.6.32-5-686 is not configured yet. dpkg: error processing linux-image-2.6-686 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: linux-base linux-image-2.6.32-5-686 linux-image-2.6-686 Thought it might be a 'bash'-ism problems, but switching shells from 'bash' to 'dash' and retrying made no apparent difference. I looked at '/var/lib/dpkg/info/linux-base.postinst' where '$label_len' is set: % grep -nA 19 'my %filesystem_types' /var/lib/dpkg/info/linux-base.postinst { ... not necessary to show this ... } And: % egrep -n 'label.*filesystem_types' /var/lib/dpkg/info/linux-base.postinst 1316: my $label_len = $filesystem_types{$type}-{len}; I noticed there's no failsafe value should the answer be none of the above. My in-use file systems are: % nocomment () { grep -v -e '^[[:space:]]*$\|^[[:space:]]*#.*$' $1 ; } % nocomment /etc/fstab | expand | tr -s ' ' | cut -d ' ' -f 3 | sort -u | tr '\n' ' '; echo auto ext3 iso9660 none proc reiserfs swap umsdos usbfs vfat That 'none' belongs to a 'bind' file system that lives on an 'ext3' partition: % grep mnt/arc /etc/fstab /dev/hdb5 /mnt/arc ext3 defaults,relatime,user,rw 0 0 /mnt/arc/tmp/tmp none bind Tried commenting out the latter line, and rebooting. Then tried installing again, and it still failed the same way. Drat. HTH... -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32-3-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash Versions of packages linux-base depends on: ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy ii libapt-pkg-perl 0.1.24 Perl interface to libapt-pkg ii libuuid-perl 0.02-3+b1 Perl extension for using UUID inte ii udev 153-2 /dev/ and hotplug management daemo ii util-linux2.16.2-0 Miscellaneous system utilities linux-base recommends no packages. linux-base suggests no packages. -- debconf information: linux-base/disk-id-manual-boot-loader: linux-base/disk-id-manual:
Bug#580453: marked as done (linux-base: Fail to upgrade to 2.6.32-12)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002hz...@ries.debian.org and subject line Bug#580467: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #580467, regarding linux-base: Fail to upgrade to 2.6.32-12 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580467: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580467 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-base Version: 2.6.32-12 Severity: grave Tags: sid Justification: renders package unusable Hi ! When i try to upgrade my kernel, the output of aptitude give me this (french locale) : Paramétrage de linux-base (2.6.32-12) ... Use of uninitialized value $label_len in numeric gt () at /var/lib/dpkg/info/linux-base.postinst line 1338. Use of uninitialized value $label_len in subtraction (-) at /var/lib/dpkg/info/linux-base.postinst line 1339. Cluster size is zero. dosfslabel failed: 256 at /var/lib/dpkg/info/linux-base.postinst line 1042, STDIN line 10. dpkg : erreur de traitement de linux-base (--configure) : le sous-processus script post-installation installé a retourné une erreur de sortie d'état 9 dpkg : des problèmes de dépendances empêchent la configuration de linux-image-2.6.32-5-amd64 : linux-image-2.6.32-5-amd64 dépend de linux-base (= 2.6.32-12) ; cependant : Le paquet linux-base n'est pas encore configuré. dpkg : erreur de traitement de linux-image-2.6.32-5-amd64 (--configure) : problèmes de dépendances - laissé non configuré dpkg : des problèmes de dépendances empêchent la configuration de linux-image-2.6-amd64 : linux-image-2.6-amd64 dépend de linux-image-2.6.32-5-amd64 ; cependant : Le paquet linux-image-2.6.32-5-amd64 n'est pas encore configuré. dpkg : erreur de traitement de linux-image-2.6-amd64 (--configure) : problèmes de dépendances - laissé non configuré Des erreurs ont été rencontrées pendant l'exécution : linux-base linux-image-2.6.32-5-amd64 linux-image-2.6-amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-3-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-base depends on: ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy ii libapt-pkg-perl 0.1.24 Perl interface to libapt-pkg ii libuuid-perl 0.02-3+b1 Perl extension for using UUID inte ii udev 153-2 /dev/ and hotplug management daemo ii util-linux2.16.2-0 Miscellaneous system utilities linux-base recommends no packages. linux-base suggests no packages. -- debconf information: linux-base/disk-id-manual: linux-base/disk-id-convert-plan-no-relabel: true linux-base/disk-id-manual-boot-loader: * linux-base/disk-id-convert-auto: true * linux-base/disk-id-convert-plan: true ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb
Bug#580538: marked as done ([INTL:es] Spanish debconf template translation)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002he...@ries.debian.org and subject line Bug#580538: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #580538, regarding [INTL:es] Spanish debconf template translation to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580538: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580538 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: n/a Severity: wishlist Tags: l10n patch Please find attached the Spanish translation for linux-2.6 pacakge. Best regards and thanks for your work, -- Omar Campagne Polaino # linux-2.6 po-debconf translation to Spanish # Copyright (C) 2010 Software in the Public Interest # This file is distributed under the same license as the linux-2.6 package. # # Changes: # - Initial translation # Omar Campagne ocampa...@gmail.com, 2010 # # - Updates # TRANSLATOR # # Traductores, si no conocen el formato PO, merece la pena leer la # documentación de gettext, especialmente las secciones dedicadas a este # formato, por ejemplo ejecutando: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Equipo de traducción al español, por favor lean antes de traducir # los siguientes documentos: # # - El proyecto de traducción de Debian al español # http://www.debian.org/intl/spanish/ # especialmente las notas y normas de traducción en # http://www.debian.org/intl/spanish/notas # # - La guía de traducción de po's de debconf: # /usr/share/doc/po-debconf/README-trans # o http://www.debian.org/intl/l10n/po-debconf/README-trans msgid msgstr Project-Id-Version: linux-image-2.6 2.6.32+5\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2010-04-23 22:14+0200\n PO-Revision-Date: 2010-05-06 19:05+0200\n Last-Translator: Omar Campagne \n Language-Team: Debian l10n Spanish debian-l10n-span...@lists.debian.org\n Language: es\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n Plural-Forms: nplurals=2; plural=(n != 1);\n X-Generator: Virtaal 0.6.0\n #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid Update disk device IDs in system configuration? msgstr ¿Desea actualizar los identificadores de los dispositivos de disco en la configuración del sistema? #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid The new Linux kernel version provides different drivers for some PATA (IDE) controllers. The names of some hard disk, CD-ROM, and tape devices may change. msgstr La nueva versión del núcleo Linux proporciona controladores diferentes para algunos controladores PATA (IDE). Puede que cambien los nombres de algunos dispositivos de disco duro, disco óptico y de cinta. #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid It is now recommended to identify disk devices in configuration files by label or UUID (unique identifier) rather than by device name, which will work with both old and new kernel versions. msgstr Se recomienda identificar los dispositivos de disco en los ficheros de configuración mediante la etiqueta o el UUID (identificador único), en lugar del nombre de dispositivo, lo cual funcionará con las versiones antiguas y recientes del núcleo. #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid If you choose to not update the system configuration automatically, you must update device IDs yourself before the next system reboot or the system may become unbootable. msgstr Si selecciona no actualizar la configuración del sistema automáticamente, tendrá que actualizar los identificadores de dispositivo manualmente antes del siguiente arranque del sistema, o puede que el sistema no pueda arrancar. #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid Apply configuration changes to disk device IDs? msgstr ¿Desea realizar estos cambios en la configuración de los identificadores de dispositivos de disco? #. Type: boolean #. Description #: ../linux-base.templates:3001 msgid These devices will be assigned UUIDs or labels: msgstr Se van a asignar etiquetas o UUID a los siguientes dispositivos: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid These configuration files will be updated: msgstr Se van a actualizar los siguientes ficheros de configuración: #. Type: boolean #. Description #. Type: boolean #. Description #:
Bug#580602: marked as done (linux-2.6: mips FPU emulation broken)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002hj...@ries.debian.org and subject line Bug#580602: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #580602, regarding linux-2.6: mips FPU emulation broken to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580602: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580602 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: src:linux-2.6 I only know this to be true of 2.6.34-rc2-dsa-octeon on gabrielli and presumably the same version on corelli. The patch in this thread allegedly allows eglibc to be built on an FPU-less (though single-cpu) system: http://www.linux-mips.org/archives/linux-mips/2010-05/msg5.html ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-libc-dev_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-libc-dev_2.6.32-13_amd64.deb linux-manual-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-manual-2.6.32_2.6.32-13_all.deb linux-patch-debian-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-13_all.deb linux-source-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-source-2.6.32_2.6.32-13_all.deb linux-support-2.6.32-5_2.6.32-13_all.deb to main/l/linux-2.6/linux-support-2.6.32-5_2.6.32-13_all.deb xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/xen-linux-system-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 580...@bugs.debian.org, and the maintainer will reopen the
Bug#580652: marked as done (linux-libc-dev 2.6.32-12 breaks KVM and QEMU)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002ho...@ries.debian.org and subject line Bug#580652: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #580652, regarding linux-libc-dev 2.6.32-12 breaks KVM and QEMU to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580652: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580652 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-libc-dev Version: 2.6.32-12 Severity: important linux-libc-dev version 2.6.32-12 has a backport of KVM: x86: Add KVM_GET/SET_VCPU_EVENTS, without the corresponding KVM: x86: Extend KVM_SET_VCPU_EVENTS with selective updates backport. This breaks KVM and KVM support in QEMU. It should either be reverted or the second should also be backported. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-2-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-libc-dev_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-libc-dev_2.6.32-13_amd64.deb linux-manual-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-manual-2.6.32_2.6.32-13_all.deb linux-patch-debian-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-13_all.deb linux-source-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-source-2.6.32_2.6.32-13_all.deb linux-support-2.6.32-5_2.6.32-13_all.deb to main/l/linux-2.6/linux-support-2.6.32-5_2.6.32-13_all.deb
Bug#580710: marked as done (linux-base: elilo needs simpler assignments)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002ht...@ries.debian.org and subject line Bug#580710: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #580710, regarding linux-base: elilo needs simpler assignments to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580710: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580710 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: linux-2.6 Version: 2.6.32-12 Severity: serious Tags: patch /usr/sbin/elilo didn't like the converted elilo.conf because it doesn't support quoted strings, or spaces around '='. Instead of: boot = /dev/disk/by-uuid/9C73-E0C3 it needs: boot=/dev/disk/by-uuid/9C73-E0C3 The following patch fixes it, but it is pretty ugly. I would've preferred to use the line that is commented out, but when I do I get an extraneous newline both before and after the newly inserted line. I assume this is due to how things are tokenized (I'm not enough of a perl guy to grok it). Also, it has a cosmetic issue where we lose the tab indention in stanzas. We go from this: image=/vmlinuz.old label=LinuxOLD root=/dev/sda2 read-only initrd=/initrd.img.old To this: image=/vmlinuz.old label=LinuxOLD # root=/dev/sda2 root=UUID=170d52c1-c568-4bad-aass-be4248ad1af4 read-only initrd=/initrd.img.old (Now to reboot, to make sure it actually works...) -- dann frazier Index: debian/linux-base.postinst === --- debian/linux-base.postinst (revision 15638) +++ debian/linux-base.postinst (working copy) @@ -499,8 +499,8 @@ return @bdevs; } -sub lilo_update { -my ($old, $new, $map) = @_; +sub do_lilo_update { +my ($old, $new, $map, $simple_assign) = @_; my @tokens = lilo_tokenize($old); my $i = 0; my $in_generic = 1; # global or image=/vmlinuz or image=/vmlinuz.old @@ -533,7 +533,12 @@ } if (defined($new_value)) { $new_value =~ s/\\//g; - $text = \n# $name = $value\n$name = \$new_value\\n; + if ($simple_assign) { + $text = \n# $name = $value\n$name = \$new_value\\n; + } else { +# $text = \n# $name=$value\n$name=$new_value\n; + $text = # $name=$value\n$name=$new_value; + } } else { $text .= $tokens[$i + 1][0] . $tokens[$i + 2][0]; } @@ -546,6 +551,13 @@ } } +sub lilo_update { +my ($old, $new, $map) = @_; +my $simple_assign = 1; + +do_lilo_update($old, $new, $map, $simple_assign); +} + sub lilo_post { _system('lilo'); } @@ -558,6 +570,13 @@ ### ELILO +sub elilo_update { +my ($old, $new, $map) = @_; +my $simple_assign = 0; + +do_lilo_update($old, $new, $map, $simple_assign); +} + sub elilo_post { _system('elilo'); } @@ -970,7 +989,7 @@ {packages = 'elilo', path = '/etc/elilo.conf', list = \lilo_list, - update = \lilo_update, + update = \elilo_update, post_update = \elilo_post, is_boot_loader = 1}, {packages = 'extlinux', ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to
Bug#580740: marked as done (linux-image-2.6.33-2-amd64: 0bda:8171 Realtek USB WiFi unsupported)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002hy...@ries.debian.org and subject line Bug#580740: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #580740, regarding linux-image-2.6.33-2-amd64: 0bda:8171 Realtek USB WiFi unsupported to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580740: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580740 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.33-1~experimental.4 Severity: normal As found on the web the device is supposedly supported by kernels 2.6.32 and later but no driver is loaded. http://blog.xff.lt/ -- Package-specific info: ** Version: Linux version 2.6.33-2-amd64 (Debian 2.6.33-1~experimental.4) (m...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Mar 17 18:41:49 UTC 2010 ** Command line: root=LABEL=placka- ro quiet ** Not tainted ** Kernel log: [600113.700016] usb 1-1: new high speed USB device using ehci_hcd and address 2 [600113.834407] usb 1-1: New USB device found, idVendor=0bda, idProduct=8171 [600113.834412] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [600113.834416] usb 1-1: Product: RTL8188S WLAN Adapter [600113.834419] usb 1-1: Manufacturer: Manufacturer Realtek ** Model information sys_vendor: product_name: product_version: chassis_vendor: chassis_version: bios_vendor: Intel Corp. bios_version: LY66210M.86A.0122.2007.0822.2001 board_vendor: Intel Corporation board_name: D201GLY board_version: AAE14305-401 ** Loaded modules: Module Size Used by ppdev 5565 0 lp 8201 0 bridge 39813 0 stp 1440 1 bridge xt_mark 917 1 xt_length 1164 2 xt_MARK 917 34 cls_fw 3545 5 sch_sfq 4718 5 sch_htb12006 1 iptable_mangle 2849 1 xt_tcpudp 2319 56 xt_conntrack2407 6 xt_state1303 4 xt_dscp 1611 0 xt_DSCP 1995 0 xt_CLASSIFY 925 0 ipt_LOG 4518 2 ipt_REJECT 1953 0 xt_owner1063 5 nf_nat_ftp 2063 0 nf_conntrack_ftp5569 1 nf_nat_ftp nf_nat_sip 4966 0 nf_conntrack_sip 13578 1 nf_nat_sip nf_nat_h323 5127 0 nf_conntrack_h323 37024 1 nf_nat_h323 nf_nat_pptp 2066 0 nf_conntrack_pptp 3865 1 nf_nat_pptp nf_conntrack_proto_gre 3491 1 nf_conntrack_pptp nf_nat_proto_gre1245 1 nf_nat_pptp nf_nat_irc 1398 0 nf_conntrack_irc3379 1 nf_nat_irc iptable_filter 2290 1 iptable_nat 4363 1 ipt_MASQUERADE 1554 1 nf_nat 13532 8 nf_nat_ftp,nf_nat_sip,nf_nat_h323,nf_nat_pptp,nf_nat_proto_gre,nf_nat_irc,iptable_nat,ipt_MASQUERADE xt_multiport2267 0 xt_iprange 1433 0 nf_conntrack_ipv4 9705 13 iptable_nat,nf_nat nf_conntrack 45895 17 xt_conntrack,xt_state,nf_nat_ftp,nf_conntrack_ftp,nf_nat_sip,nf_conntrack_sip,nf_nat_h323,nf_conntrack_h323,nf_nat_pptp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_nat_irc,nf_conntrack_irc,iptable_nat,ipt_MASQUERADE,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 ip_tables 14114 3 iptable_mangle,iptable_filter,iptable_nat x_tables 12957 17 xt_mark,xt_length,xt_MARK,xt_tcpudp,xt_conntrack,xt_state,xt_dscp,xt_DSCP,xt_CLASSIFY,ipt_LOG,ipt_REJECT,xt_owner,iptable_nat,ipt_MASQUERADE,xt_multiport,xt_iprange,ip_tables w83627ehf 20102 0 hwmon_vid 1828 1 w83627ehf loop 11902 0 button 4634 0 parport_pc 18855 1 processor 29489 0 parport27314 3 ppdev,lp,parport_pc evdev 7384 2 snd_intel8x0 24170 0 snd_ac97_codec 99282 1 snd_intel8x0 ac97_bus1086 1 snd_ac97_codec snd_pcm_oss32790 0 snd_mixer_oss 12654 1 snd_pcm_oss psmouse45587 0 tpm_tis 7336 0 tpm 9933 1 tpm_tis tpm_bios4521 1 tpm serio_raw 3960 0 snd_pcm61078 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss shpchp 26264 0 snd_timer 15749 1 snd_pcm pci_hotplug21251
Bug#580638: marked as done (realtek r8192s_usb new_id)
Your message dated Tue, 18 May 2010 14:23:05 + with message-id e1oenhj-0002hy...@ries.debian.org and subject line Bug#580740: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #580740, regarding realtek r8192s_usb new_id to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580740: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580740 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.33-1~experimental.5 X-debbugs-Cc: Ben Hutchings b...@decadent.org.uk, Stefan Lippers-Hollmann s@gmx.de, 579...@bugs.debian.org File: /lib/modules/2.6.33-2-686/kernel/drivers/staging/rtl8192su/r8192s_usb.ko In contrast with the steps noted at http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579694#47 I find I need to do the odd combination of # modprobe r8192s_usb # echo 0bda 8171 | /sys/bus/usb/drivers/rtl819xU/new_id as there is no other /sys/bus/usb/drivers/r* (not that I know what I'm talking about.) Nothing I put in /etc/udev/rules.d/70-persistent-net.rules helps. Please make it so that it works upon plugging it in. (The firmware is already in firmware-realtek.) Please also add it to /lib/modules/2.6.32 . ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-libc-dev_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-libc-dev_2.6.32-13_amd64.deb linux-manual-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-manual-2.6.32_2.6.32-13_all.deb linux-patch-debian-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-13_all.deb linux-source-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-source-2.6.32_2.6.32-13_all.deb linux-support-2.6.32-5_2.6.32-13_all.deb to
Bug#580799: marked as done (linux-image-2.6.32-5-sparc64: Should include pata_cmd64x driver instead of cmd64x)
Your message dated Tue, 18 May 2010 14:23:06 + with message-id e1oenhk-0002i3...@ries.debian.org and subject line Bug#580799: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #580799, regarding linux-image-2.6.32-5-sparc64: Should include pata_cmd64x driver instead of cmd64x to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580799: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580799 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.32-12 Severity: serious Because of the IDE - ATA transition for Squeeze the pata_cmd64x driver should be enabled instead of the (old) cmd64x driver. AFAIK the pata_cmd64x has been tested and is known to work correctly. My system failed to boot after updrading to 2.6.32-12 because I had updated my bootloader config and fstab as per the debconf dialogs, but was still getting the /dev/hdX devices from the old driver. -- Package-specific info: ** Version: Linux version 2.6.32-5-sparc64 (Debian 2.6.32-12) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-10) ) #1 Mon May 3 12:15:34 UTC 2010 ** Command line: root=/dev/hda2 ro ** Not tainted ** Kernel log: [ 34.412487] Unpacking initramfs... [ 36.425976] Freeing initrd memory: 8542k freed [ 36.428004] power: Control reg at 1fff1724000 [ 36.429219] audit: initializing netlink socket (disabled) [ 36.429481] type=2000 audit(2.160:1): initialized [ 36.430530] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 36.446641] VFS: Disk quotas dquot_6.5.2 [ 36.447294] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) [ 36.448042] msgmni has been set to 2016 [ 36.450085] alg: No test for stdrng (krng) [ 36.450673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 36.450782] io scheduler noop registered [ 36.450847] io scheduler anticipatory registered [ 36.450913] io scheduler deadline registered [ 36.451104] io scheduler cfq registered (default) [ 36.451824] atyfb: 3D RAGE II+ (Mach64 GT) [0x4754 rev 0x9a] [ 36.453534] atyfb: 2M SGRAM (1:1), 14.31818 MHz XTAL, 200 MHz PLL, 67 Mhz MCLK, 67 MHz XCLK [ 36.516048] Console: switching to colour frame buffer device 144x56 [ 36.541375] atyfb: fb0: ATY Mach64 frame buffer device on PCI [ 36.542671] /SUNW,f...@1e,0: FFB at 01fc, type 51, DAC pnum[236e] rev[10] manuf_rev[1] [ 36.556761] [drm] Initialized drm 1.1.0 20060810 [ 36.557763] /p...@1f,0/p...@1,1/e...@1/s...@14,3083f8: Keyboard port at 1fff13083f8, irq 6 [ 36.558491] /p...@1f,0/p...@1,1/e...@1/s...@14,3062f8: Mouse port at 1fff13062f8, irq 7 [ 36.559586] f0061c64: ttyS0 at MMIO 0x1fff140 (irq = 5) is a SAB82532 V3.2 [ 36.560168] f0061c64: ttyS1 at MMIO 0x1fff1400040 (irq = 5) is a SAB82532 V3.2 [ 36.893614] Floppy drive(s): fd0 is 1.44M [ 36.910680] FDC 0 is a National Semiconductor PC87306 [ 36.912772] Uniform Multi-Platform E-IDE driver [ 36.913344] ide-gd driver 1.18 [ 36.914572] mice: PS/2 mouse device common for all mice [ 36.916206] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0 [ 36.920416] TCP cubic registered [ 36.922175] NET: Registered protocol family 10 [ 36.927110] lo: Disabled Privacy Extensions [ 36.930640] Mobile IPv6 [ 36.930789] NET: Registered protocol family 17 [ 36.931687] registered taskstats version 1 [ 36.932518] rtc-m48t59 rtc-m48t59.0: setting system clock to 2010-05-08 17:43:06 UTC (1273340586) [ 36.932895] Initalizing network drop monitor service [ 37.102842] udev: starting version 153 [ 37.560607] PCI: Enabling device: (:01:01.1), cmd 2 [ 37.560667] sunhme.c:v3.10 August 26, 2008 David S. Miller (da...@davemloft.net) [ 37.567765] input: Sun Type 5 keyboard as /devices/root/f005f9c0/f00601b4/f0061504/f0063594/serio0/input/input0 [ 37.570655] input: Sun Mouse as /devices/root/f005f9c0/f00601b4/f0061504/f0064df4/serio1/input/input1 [ 37.580218] eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:9c:14:f5 [ 37.613386] cmd64x :01:03.0: IDE controller (0x1095:0x0646 rev 0x03) [ 37.627752] cmd64x :01:03.0: 100% native mode on irq 14 [ 37.634742] ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027 [ 37.641890] ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f [ 37.649158] Probing IDE interface ide0... [ 37.937464] hda: ST34342A, ATA DISK drive [ 38.613346] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 38.613792] hda: MWDMA2 mode selected [ 38.621602] Probing IDE interface ide1... [ 38.909368] hdc: Maxtor 6E040L0, ATA DISK drive [
Bug#580915: marked as done ([INTL:da] Danish translation of the debconf templates linux-2.6)
Your message dated Tue, 18 May 2010 14:23:06 + with message-id e1oenhk-0002id...@ries.debian.org and subject line Bug#580915: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #580915, regarding [INTL:da] Danish translation of the debconf templates linux-2.6 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580915: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580915 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Severity: wishlist Tags: l10n patch Please include the attached Danish debconf translation j...@joe-desktop:~/over/debian/linux26$ msgfmt --statistics -c -v -o /dev/null da.po 41 oversatte tekster. bye Joe # Danish translation linux-2.6. # Copyright (C) 2010 linux-2.6 Joe Hansen. # This file is distributed under the same license as the linux-2.6 package. # Joe Hansen joedalt...@yahoo.dk, 2010. # msgid msgstr Project-Id-Version: linux-2.6\n Report-Msgid-Bugs-To: linux-...@packages.debian.org\n POT-Creation-Date: 2010-03-29 14:15+0100\n PO-Revision-Date: 2010-05-09 17:30+01:00\n Last-Translator: Joe Hansen joedalt...@yahoo.dk\n Language-Team: Danish debian-l10n-dan...@lists.debian.org \n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: boolean #. Description #: ../linux-base.templates:1001 msgid Update disk device ids in system configuration? msgstr Opdater diskenheds-id'er i systemkonfigurationen? #. Type: boolean #. Description #: ../linux-base.templates:1001 msgid The new Linux kernel version provides different drivers for some PATA (IDE) controllers. The names of some hard disk, CD-ROM and tape devices may change. msgstr Den nye version af Linuxkernen har forskellige drivere for nogle PATA-kontrollere (IDE). Navnene på nogle harddiske, cd-rom og båndenheder kan skifte. #. Type: boolean #. Description #: ../linux-base.templates:1001 msgid You are recommended to identify disk devices in configuration files by label or UUID (unique identifier) rather than by device name, which will work with both old and new kernel versions. Your system configuration can be updated automatically in most cases. msgstr Det anbefales at du identificerer diskenheder i konfigurationsfiler med etiket eller UUID (unik identifikation) fremfor via enhedsnavn, som vil virke med både gamle og nye kerneversioner. Din systemkonfiguration kan i de fleste tilfælde automatisk opdateres. #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:2001 ../linux-base.templates:3001 msgid Apply these configuration changes to disk device ids? msgstr Anvend disse konfigurationsændringer til diskenheds-id'er? #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid These devices will be assigned UUIDs or labels: msgstr Disse enheder vil få tildelt UUID'er eller etiketter: #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid ${relabel} msgstr ${relabel} #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:2001 ../linux-base.templates:3001 msgid These configuration files will be updated: msgstr Disse konfigurationsfiler vil blive opdateret: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:2001 ../linux-base.templates:3001 msgid ${files} msgstr ${files} #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:2001 ../linux-base.templates:3001 msgid The device ids will be changed as follows: msgstr Enheds-id'erne vil blive ændret som vist i det følgende: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:2001 ../linux-base.templates:3001 msgid ${id_map} msgstr ${id_map} #. Type: note #. Description #: ../linux-base.templates:4001 msgid Please check these configuration files before rebooting msgstr Tjek venligst disse konfigurationsfiler før genstart #. Type: note #. Description #: ../linux-base.templates:4001 msgid These configuration files still use some device names that may change when using the new kernel: msgstr Disse konfigurationsfiler bruger stadig nogle enhedsnavne som måske vil ændre sig, når den nye kerne bruges: #. Type: note #. Description #: ../linux-base.templates:4001 msgid ${unconverted} msgstr ${unconverted} #. Type: note #. Description #: ../linux-base.templates:5001 msgid Check the boot loader configuration before rebooting msgstr Tjek opstartsindlæserens (boot loader) konfiguration før genstart #. Type: note #. Description #:
Bug#581392: marked as done (linux-image-2.6.26-2-amd64: A couple of RAID4/RAID6 fixes from upstream.)
Your message dated Tue, 18 May 2010 14:23:06 + with message-id e1oenhk-0002ii...@ries.debian.org and subject line Bug#581392: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #581392, regarding linux-image-2.6.26-2-amd64: A couple of RAID4/RAID6 fixes from upstream. to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 581392: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581392 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.26-21lenny4 Severity: normal Tags: patch -- Package-specific info: ** Version: Linux version 2.6.26-2-amd64 (Debian 2.6.26-21lenny4) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Tue Mar 9 22:29:32 UTC 2010 Here are a couple of md software RAID fixes from upstream: 1. Would attempt a RAID4 reshape on an array with insufficient devices - bit of a corner case as not many people use RAID4, but still. 2. Would fail to attempt to scrub an unreadable sector on a singly-degraded RAID6 (would drop to a doubly-degraded array instead). This is reasonably likely to be hit on large arrays, and leads to loss of redundancy (the larger the array, the more likely this is to result in end-user data-loss). Both are in Linus-git... Thanks, Tim. *** raid6-degraded-scrub-raid4-reshape-lenny.patch --- /e2/lenny-amd64/root/build/linux-2.6-2.6.26/drivers/md/raid5.c 2008-07-13 22:51:29.0 +0100 +++ drivers/md/raid5.c 2010-05-12 16:33:09.0 +0100 @@ -1163,7 +1163,7 @@ clear_bit(R5_UPTODATE, sh-dev[i].flags); atomic_inc(rdev-read_errors); - if (conf-mddev-degraded) + if (conf-mddev-degraded = conf-max_degraded) printk_rl(KERN_WARNING raid5:%s: read error not correctable (sector %llu on %s).\n, @@ -4202,7 +4202,7 @@ */ sector_t here_new, here_old; int old_disks; - int max_degraded = (mddev-level == 5 ? 1 : 2); + int max_degraded = (mddev-level == 6 ? 2 : 1); if (mddev-new_level != mddev-level || mddev-new_layout != mddev-layout || ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.32-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.32-13_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.32-13_all.deb linux-2.6_2.6.32-13.diff.gz to main/l/linux-2.6/linux-2.6_2.6.32-13.diff.gz linux-2.6_2.6.32-13.dsc to main/l/linux-2.6/linux-2.6_2.6.32-13.dsc linux-base_2.6.32-13_all.deb to main/l/linux-2.6/linux-base_2.6.32-13_all.deb linux-doc-2.6.32_2.6.32-13_all.deb to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-13_all.deb linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-all_2.6.32-13_amd64.deb linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-openvz_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-vserver_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common-xen_2.6.32-13_amd64.deb linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-13_amd64.deb linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-openvz-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-vserver-amd64_2.6.32-13_amd64.deb linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-headers-2.6.32-5-xen-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-13_amd64.deb linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-13_amd64.deb linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb to main/l/linux-2.6/linux-image-2.6.32-5-openvz-amd64-dbg_2.6.32-13_amd64.deb
Bug#581399: marked as done ([l10n:cs] Updated Czech translation of PO debconf template for package linux-2.6)
Your message dated Tue, 18 May 2010 14:23:06 + with message-id e1oenhk-0002in...@ries.debian.org and subject line Bug#581399: fixed in linux-2.6 2.6.32-13 has caused the Debian Bug report #581399, regarding [l10n:cs] Updated Czech translation of PO debconf template for package linux-2.6 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 581399: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581399 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: N/A Severity: wishlist Tags: l10n, patch In attachment there is updated Czech translation of PO debconf template (cs.po) for package linux-2.6, please include it. Best regards -- Michal Šimůnek # Czech PO debconf template translation of linux-2.6. # Copyright (C) 2010 Michal Simunek michal.simu...@gmail.com # This file is distributed under the same license as the linux-2.6 package. # Michal Simunek michal.simu...@gmail.com, 2010. # msgid msgstr Project-Id-Version: linux-2.6\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2010-04-23 22:14+0200\n PO-Revision-Date: 2010-05-12 18:02+0200\n Last-Translator: Michal Simunek michal.simu...@gmail.com\n Language-Team: Czech debian-l10n-cz...@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=utf-8\n Content-Transfer-Encoding: 8bit\n #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid Update disk device IDs in system configuration? msgstr Aktualizovat v nastavení systému ID diskových zařízení? #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid The new Linux kernel version provides different drivers for some PATA (IDE) controllers. The names of some hard disk, CD-ROM, and tape devices may change. msgstr Nová verze Linuxového jádra přináší pro některé PATA (IDE) řadiče jiné ovladače. Názvy u některých pevných disků, CD-ROM a páskových mechanik se mohly změnit. #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid It is now recommended to identify disk devices in configuration files by label or UUID (unique identifier) rather than by device name, which will work with both old and new kernel versions. msgstr Nyní je doporučeno v konfiguračních souborech označovat disková zařízení spíše než názvem zařízení raději popiskem či UUID (unikátním identifikátorem), což funguje jak se starou, tak i s novou verzí jádra. #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid If you choose to not update the system configuration automatically, you must update device IDs yourself before the next system reboot or the system may become unbootable. msgstr Pokud se rozhodnete, že nechcete aktualizovat nastavení systému automaticky, musíte před příštím restartem systému aktualizovat ID zařízení ručně, jinak se systém může stát nezaveditelným. #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid Apply configuration changes to disk device IDs? msgstr Použít změny v nastavení ID diskových zařízení? #. Type: boolean #. Description #: ../linux-base.templates:3001 msgid These devices will be assigned UUIDs or labels: msgstr Těmto zařízením bude přiřazeno UUID či popisek: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid These configuration files will be updated: msgstr Tyto konfigurační soubory budou aktualizovány: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid The device IDs will be changed as follows: msgstr ID diskových zařízení se změní následovně: #. Type: error #. Description #: ../linux-base.templates:5001 msgid Configuration files still contain deprecated device names msgstr Konfigurační soubory stále obsahují zastaralé názvy zařízení #. Type: error #. Description #: ../linux-base.templates:5001 msgid The following configuration files still use some device names that may change when using the new kernel: msgstr Následující konfigurační soubory stále používají názvy zařízení, které je při používání nového jádra třeba změnit: #. Type: error #. Description #: ../linux-base.templates:6001 msgid Boot loader configuration check needed msgstr Je vyžadováno ověření nastavení zavaděče #. Type: error #. Description #: ../linux-base.templates:6001 msgid The boot loader configuration for this system was not recognized. These settings in the configuration may need to be updated: msgstr Nastavení zavaděče v tomto systému nebylo rozpoznáno. Tato
Re: uploading 2.6.34
* maximilian attems m...@stro.at [2010-05-18 15:30]: upload planed by tomorrow 12 UT. I'm test-compiling ARM and MIPS now, so tomorrow is fine with me. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100518171354.ga4...@jirafa.cyrius.com
Bug#574657: Get the same issue
Hi, I have the similar issue. My iseweasel was started for many days and all works fine includes rdesktop. Then when I open and close rdesktop and try to alt-tab to iceweasel it's crushed. When I try to start it again I always get the same error hs:~# iceweasel Inconsistency detected by ld.so: ../sysdeps/x86_64/dl-machine.h: 460: elf_machine_rela_relative: Assertion `((reloc-r_info) 0x) == 8' failed! hs:~# date Wed May 19 00:02:14 UTC 2010 hs:~# uname -a Linux hs 2.6.32-3-amd64 #1 SMP Wed Feb 24 18:07:42 UTC 2010 x86_64 GNU/Linux I've not any updates or installation any programs in last days. So I have no idea why it happens. ~Nickolay -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4bf2c8b4.3060...@tomsksoft.com
Bug#574657: Get the same issue
hs:~# uname -a Linux hs 2.6.32-3-amd64 #1 SMP Wed Feb 24 18:07:42 UTC 2010 x86_64 GNU/Linux Can you reproduce with the latest sid kernel (install linux-image-2.6.32-5-amd64)? -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikerlmxmnsicsijcxpl5ecgznypwav3cgz5d...@mail.gmail.com
Processed: forcibly merging 580616 582152
Processing commands for cont...@bugs.debian.org: forcemerge 580616 582152 Bug#580616: debconf: Unknown template field '_description' Bug#582152: debconf: Unknown template field '_description' Bug#576758: Debconf: Unknown template field _description Forcibly Merged 576758 580616 582152. thanks Stopping processing here. Please contact me if you need assistance. -- 582152: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582152 576758: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=576758 580616: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580616 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.127420784928260.transcr...@bugs.debian.org
Bug#582152: debconf: Unknown template field '_description'
Package: linux-2.6 Version: 2.6.33-1~experimental.4 Severity: normal Preconfiguring packages ... debconf: Unknown template field '_description', in stanza #1 of /tmp/linux-image-2.6.33-2-amd64.template.87574 debconf: Unknown template field '_description', in stanza #2 of /tmp/linux-image-2.6.33-2-amd64.template.87574 debconf: Unknown template field '_description', in stanza #3 of /tmp/linux-image-2.6.33-2-amd64.template.87574 debconf: Unknown template field '_description', in stanza #4 of /tmp/linux-image-2.6.33-2-amd64.template.87574 debconf: Unknown template field '_description', in stanza #5 of /tmp/linux-image-2.6.33-2-amd64.template.87574 debconf: Unknown template field '_description', in stanza #6 of /tmp/linux-image-2.6.33-2-amd64.template.87574 debconf: Unknown template field '_description', in stanza #7 of /tmp/linux-image-2.6.33-2-amd64.template.87574 [...] Preparing to replace linux-image-2.6.33-2-amd64 2.6.33-1~experimental.4 (using .../linux-image-2.6.33-2-amd64_2.6.33-1~experimental.5_amd64.deb) ... debconf: Unknown template field '_description', in stanza #1 of /var/lib/dpkg/tmp.ci/templates debconf: Unknown template field '_description', in stanza #2 of /var/lib/dpkg/tmp.ci/templates debconf: Unknown template field '_description', in stanza #3 of /var/lib/dpkg/tmp.ci/templates debconf: Unknown template field '_description', in stanza #4 of /var/lib/dpkg/tmp.ci/templates debconf: Unknown template field '_description', in stanza #5 of /var/lib/dpkg/tmp.ci/templates debconf: Unknown template field '_description', in stanza #6 of /var/lib/dpkg/tmp.ci/templates debconf: Unknown template field '_description', in stanza #7 of /var/lib/dpkg/tmp.ci/templates [...] Setting up linux-image-2.6.33-2-amd64 (2.6.33-1~experimental.5) ... debconf: Unknown template field '_description', in stanza #1 of /var/lib/dpkg/info/linux-image-2.6.33-2-amd64.templates debconf: Unknown template field '_description', in stanza #2 of /var/lib/dpkg/info/linux-image-2.6.33-2-amd64.templates debconf: Unknown template field '_description', in stanza #3 of /var/lib/dpkg/info/linux-image-2.6.33-2-amd64.templates debconf: Unknown template field '_description', in stanza #4 of /var/lib/dpkg/info/linux-image-2.6.33-2-amd64.templates debconf: Unknown template field '_description', in stanza #5 of /var/lib/dpkg/info/linux-image-2.6.33-2-amd64.templates debconf: Unknown template field '_description', in stanza #6 of /var/lib/dpkg/info/linux-image-2.6.33-2-amd64.templates debconf: Unknown template field '_description', in stanza #7 of /var/lib/dpkg/info/linux-image-2.6.33-2-amd64.templates - Josh Triplett -- Package-specific info: [snipped] -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.33-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.33-2-amd64 depends on: ii debconf [debconf 1.5.32 Debian configuration management sy ii initramfs-tools 0.94.4 tools for generating an initramfs ii linux-base 2.6.33-1~experimental.5 Linux image base package ii module-init-tool 3.12~pre2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.33-2-amd64 recommends: pn firmware-linux-free none (no description available) Versions of packages linux-image-2.6.33-2-amd64 suggests: pn grub | lilo none (no description available) pn linux-doc-2.6.33 none (no description available) Versions of packages linux-image-2.6.33-2-amd64 is related to: pn firmware-bnx2 none (no description available) pn firmware-bnx2xnone (no description available) pn firmware-ipw2x00 none (no description available) pn firmware-ivtv none (no description available) pn firmware-iwlwifi none (no description available) pn firmware-linuxnone (no description available) pn firmware-linux-nonfreenone (no description available) pn firmware-qlogic none (no description available) pn firmware-ralink none (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.33-2-amd64/prerm/removing-running-kernel-2.6.33-2-amd64: true linux-image-2.6.33-2-amd64/postinst/bootloader-test-error-2.6.33-2-amd64: linux-image-2.6.33-2-amd64/postinst/depmod-error-initrd-2.6.33-2-amd64: false linux-image-2.6.33-2-amd64/postinst/bootloader-error-2.6.33-2-amd64: * linux-image-2.6.33-2-amd64/postinst/missing-firmware-2.6.33-2-amd64: linux-image-2.6.33-2-amd64/prerm/would-invalidate-boot-loader-2.6.33-2-amd64: true -- To UNSUBSCRIBE, email to
Processed: forcibly merging 576758 582152
Processing commands for cont...@bugs.debian.org: # Automatically generated email from bts, devscripts version 2.10.35lenny7 forcemerge 576758 582152 Bug#576758: Debconf: Unknown template field _description Bug#582152: debconf: Unknown template field '_description' Bug#580616: debconf: Unknown template field '_description' Forcibly Merged 576758 580616 582152. End of message, stopping processing here. Please contact me if you need assistance. -- 582152: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582152 576758: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=576758 580616: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580616 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12742089537464.transcr...@bugs.debian.org
Bug#580660: linux-image-2.6.32-5-amd64: LVM volumes fail to detect on newer kernels
Same problem on my system. +++-===-===-== ii cryptsetup 2:1.1.0-2.1 configures encrypted block devices ii lvm22.02.62-1 The Linux Logical Volume Manager See also bug 576488. Let me know if I can provide more info?
Bug#580660: linux-image-2.6.32-5-amd64: LVM volumes fail to detect on newer kernels
On Tue, May 18, 2010 at 09:41:03PM +0200, Frederik Vanrenterghem wrote: Same problem on my system. +++-===-===-== ii cryptsetup 2:1.1.0-2.1 configures encrypted block devices ii lvm22.02.62-1 The Linux Logical Volume Manager See also bug 576488. Let me know if I can provide more info? provide a new bugreport against initramfs-tools properly sent by reportbug. instead of following up to unrelated stuff, you seem to have cryptsetup installed, thanks. -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100518200728.gm13...@baikonur.stro.at
Bug#582177: initramfs-tools: fails to load ramdisk on boot; system with RAID CRYPTO; udev problems?
Package: initramfs-tools Version: 0.94.4 Severity: important Tags: squeeze Very recent changes to the initramfs-tools have caused my system to fail to load ramdisk at boot. I have to boot the system with the backup initrd image. I have checked with rootdelay=10--no change. The problem does not appear to be related to grub. When I boot the machine and watch the mass of kernel data fly by I get the impression that udev is not working or has somehow changed from mid-February till now (all of these problems first appeared in late Feb/early March of 2010). I am only using the squeeze dataset without items from experimental or other sources. My system is different from most in that my / partition is inside a luks crypto container which is then on a RAID 6 volume. The /boot is on an unencrypted RAID 1 volume. Each physical disk has a separate bios_grub partition (128k) and the partition tables are GPT. As I said before this above setup WORKS and I have a 6TB system where the boot disk can fail (I tested this) and the system comes back alive. For whatever reason, recent changes to initramfs-tools 1) make it not see the hard drives or any USB devices for that mater, 2) fails to start the RAID devices, and thus 3) the kernel panics at about 2secs into the boot sequence. Thank you for all your work. Squeeze really is shaping into a mighty force. C. Cropper -- Package-specific info: -- /proc/cmdline BOOT_IMAGE=/vmlinuz-2.6.32-3-amd64 root=/dev/mapper/md1_crypt ro rootdelay=2 -- /proc/filesystems xfs fuseblk -- lsmod Module Size Used by xt_multiport2267 1 nf_nat_ftp 2047 0 nf_conntrack_ftp5537 1 nf_nat_ftp nf_nat_irc 1366 0 nf_conntrack_irc3347 1 nf_nat_irc ipt_REJECT 1953 4 ipt_ULOG7129 17 xt_limit1782 18 xt_tcpudp 2319 54 xt_state1303 65 ipt_MASQUERADE 1554 1 iptable_nat 4299 1 nf_nat 13372 4 nf_nat_ftp,nf_nat_irc,ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 9833 68 iptable_nat,nf_nat nf_conntrack 46471 9 nf_nat_ftp,nf_conntrack_ftp,nf_nat_irc,nf_conntrack_irc,xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 iptable_filter 2258 1 ip_tables 13899 2 iptable_nat,iptable_filter x_tables 12813 9 xt_multiport,ipt_REJECT,ipt_ULOG,xt_limit,xt_tcpudp,xt_state,ipt_MASQUERADE,iptable_nat,ip_tables ppdev 5030 0 lp 7462 0 parport27938 2 ppdev,lp powernow_k810930 0 cpufreq_userspace 1992 0 cpufreq_conservative 5162 0 cpufreq_powersave902 0 cpufreq_stats 2659 0 binfmt_misc 6431 1 fuse 50110 1 loop 11783 0 snd_hda_codec_realtek 235378 1 snd_hda_intel 19619 2 snd_hda_codec 54212 2 snd_hda_codec_realtek,snd_hda_intel usblp 9571 0 snd_hwdep 5364 1 snd_hda_codec snd_pcm_oss32591 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm60615 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi4400 0 snd_rawmidi15483 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq42801 2 snd_seq_midi,snd_seq_midi_event snd_timer 15502 2 snd_pcm,snd_seq snd_seq_device 4477 3 snd_seq_midi,snd_rawmidi,snd_seq amd64_edac_mod 13630 0 snd46350 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device edac_core 29245 4 amd64_edac_mod soundcore 4598 1 snd psmouse49505 0 shpchp 26264 0 i2c_nforce2 5280 0 edac_mce_amd6353 1 amd64_edac_mod i2c_core 15584 1 i2c_nforce2 serio_raw 3752 0 pci_hotplug21171 1 shpchp pcspkr 1699 0 snd_page_alloc 6217 2 snd_hda_intel,snd_pcm container 2389 0 evdev 7336 11 processor 30215 2 powernow_k8 xfs 435388 3 exportfs3170 1 xfs sha256_generic 8692 16 cryptd 5366 0 aes_x86_64 7340 16 aes_generic25714 1 aes_x86_64 cbc 2539 8 dm_crypt 10507 8 dm_mod 53674 17 dm_crypt raid45644388 1 async_raid6_recov 5058 1 raid456 async_pq3479 2 raid456,async_raid6_recov raid6_pq 77179 2 async_raid6_recov,async_pq async_xor 2478 3 raid456,async_raid6_recov,async_pq xor 4380 1 async_xor async_memcpy
Bug#582177: initramfs-tools: fails to load ramdisk on boot; system with RAID CRYPTO; udev problems?
On Tue, May 18, 2010 at 05:29:17PM -0400, C. Cropper wrote: Package: initramfs-tools Version: 0.94.4 Severity: important Tags: squeeze Very recent changes to the initramfs-tools have caused my system to fail to load ramdisk at boot. I have to boot the system with the backup initrd image. I have checked with rootdelay=10--no change. The problem does not appear to be related to grub. When I boot the machine and watch the mass of kernel data fly by I get the impression that udev is not working or has somehow changed from mid-February till now (all of these problems first appeared in late Feb/early March of 2010). I am only using the squeeze dataset without items from experimental or other sources. My system is different from most in that my / partition is inside a luks crypto container which is then on a RAID 6 volume. The /boot is on an unencrypted RAID 1 volume. Each physical disk has a separate bios_grub partition (128k) and the partition tables are GPT. As I said before this above setup WORKS and I have a 6TB system where the boot disk can fail (I tested this) and the system comes back alive. For whatever reason, recent changes to initramfs-tools 1) make it not see the hard drives or any USB devices for that mater, 2) fails to start the RAID devices, and thus 3) the kernel panics at about 2secs into the boot sequence. Thank you for all your work. Squeeze really is shaping into a mighty force. C. Cropper thanks for your feedback, will need more data to see whats gone wrong. please post output of: sh -x mkinitramfs -v -o /tmp/foo dpkg -l cryptsetup and mount thank you and sorry. -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100518214643.gp13...@baikonur.stro.at
Processed: tagging 582177
Processing commands for cont...@bugs.debian.org: tags 582177 - squeeze Bug #582177 [initramfs-tools] initramfs-tools: fails to load ramdisk on boot; system with RAID CRYPTO; udev problems? Removed tag(s) squeeze. thanks Stopping processing here. Please contact me if you need assistance. -- 582177: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582177 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.127422139215849.transcr...@bugs.debian.org
Bug#582177: initramfs-tools: fails to load ramdisk on boot; more information
More information. In order to get my system to boot I have to go into the editor in GRUB at boot-time and change the initrd /initrd.img-2.6.32-3-amd64 to initrd /initrd.img-2.6.32-3-amd64.bak IF I copy the initrd.img-2.6.32-3-amd64.bak file to initrd.img-2.6.32-3-amd64 on /boot (and rerun update-grub) the computer will still NOT boot (i.e it still fails to load the ramdisk). Summary: I am wondering if this is a GRUB problem. I still believe it is a initramfs-tools problem because it only happened when the initramfs-tools package was changed. C. Cropper -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201005182055.03310.crop...@acm.org
Bug#582177: initramfs-tools: fails to load ramdisk on boot; DEBUG DATA ATTACHED
On Tue, May 18, 2010 at 08:39:02PM -0400, crop...@acm.org wrote: Data as requested. this looks good, please send me privately borked initramfs and working initramfs, so that I can compare. thanks. -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100519004835.gr13...@baikonur.stro.at
Bug#582107: NFS mounts default to version 4, don't fall back automatically
On Tue, 2010-05-18 at 14:23 +0200, Juliusz Chroboczek wrote: Package: nfs-common Version: 1:1.2.2-1 Recent versions of mount.nfs default to NFS version 4. My understanding is that mount.nfs does not even support version 4 and you have to explicitly use mount.nfs4 (i.e. specify filesystem type as 'nfs4'). The result is that mounting ordinary version 3 filesystems fails with EPERM. I can't reproduce this. The bug is not the new default, which is open to debate; the bug is that Sun RPC is supposed to allow negotiation of the protocol version, and that mount appears unable to fall back to version 3 if version 4 is not supported by the server. A workaround is to add vers=3 to the options column in /etc/fstab. Please provide the complete fstab line that fails for you. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse. signature.asc Description: This is a digitally signed message part
Processed: tagging 582107
Processing commands for cont...@bugs.debian.org: tags 582107 moreinfo unreproducible Bug #582107 [nfs-common] NFS mounts default to version 4, don't fall back automatically Added tag(s) unreproducible and moreinfo. thanks Stopping processing here. Please contact me if you need assistance. -- 582107: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582107 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.127423794417350.transcr...@bugs.debian.org
Processed: tagging 581715
Processing commands for cont...@bugs.debian.org: tags 581715 upstream Bug #581715 [linux-2.6] acpi-fakekey: kernel-provided name 'uinput' and NAME= 'input/uinput' disagree Added tag(s) upstream. thanks Stopping processing here. Please contact me if you need assistance. -- 581715: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581715 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.127423854020804.transcr...@bugs.debian.org
Bug#582003: nfs-common: nfs client ignores port=2049 option when mounting
On Mon, 2010-05-17 at 17:23 +0200, Paul Millar wrote: Package: nfs-common Version: 1:1.2.2-1 Severity: normal Tags: sid Hi, I'm trying to mount an NFS server that isn't registered in the portmapper. I believe this has worked in the past and something changed moderately recently (probably between 2009-11-19 and 2010-5-1) that broke this behaviour. The options supplied to mount (via -o) are: nfsvers=2,nolock,udp,noac,intr,rw,mountport=mount,port=2049 (where mount is the UDP port of the NFS mount daemon; the mount daemon isn't bound to some well-known port, but is discovered by a support script) An attempt to mount the NFS server using the above options fails. Watching the network traffic, I see the following SunRPC calls: 1. SunRPC NULL call to a MOUNT service (running on UDP port mount) ... this is successful 2. SunRPC MNT call to a MOUNT service (running on UDP port mount) ... this is successful 3. SunRPC GETPORT call to Portmap service .. this is unsuccessful (no registered program) The failing GETPORT call to portmapper is querying for program 1003 (NFS), version 2, proto UDP. The failure of this call is expected: the NFS server isn't registered in the portmapper service, so such a query should fail. However, what isn't clear is why the client is calling the Portmapper service since the port number has been supplied in the mount options (port=2049) [...] Right. For whatever reason, mount.nfs processes the options into a canonical form and at this point it will lose the port=2049 option. Please can you test the following patch: --- nfs-utils-1.2.2.orig/utils/mount/stropts.c +++ nfs-utils-1.2.2/utils/mount/stropts.c @@ -434,8 +434,8 @@ if (po_append(options, new_option) == PO_FAILED) return 0; - po_remove_all(options, port); - if (nfs_pmap-pm_port != NFS_PORT) { + if (po_remove_all(options, port) == PO_FOUND || + nfs_pmap-pm_port != NFS_PORT) { snprintf(new_option, sizeof(new_option) - 1, port=%lu, nfs_pmap-pm_port); if (po_append(options, new_option) == PO_FAILED) --- END --- You can find a version of the nfs-utils package including this patch under http://people.debian.org/~benh/. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse. signature.asc Description: This is a digitally signed message part
Processed: tagging 582003
Processing commands for cont...@bugs.debian.org: tags 582003 patch moreinfo Bug #582003 [nfs-common] nfs-common: nfs client ignores port=2049 option when mounting Added tag(s) moreinfo and patch. thanks Stopping processing here. Please contact me if you need assistance. -- 582003: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582003 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12742407132259.transcr...@bugs.debian.org
Bug#574657: Get the same issue
I suppose no because I can't reproduce it even in my current configuration. Some more info. This problem affect not only iceweasel. Icedove also down some time after and unable to start again. WinXP in VirtualBox OSE 3.1.6 go to reboot when I switch to desktop with it and XP can't start. Lxterminal works but when I close it and try open it wasn't start. I've reboot my PC and now all works well. XP also works but report that system was restore after serious problem or something like that. If this problem will occur again I'll try to not reboot PC and provide us much info as it possible. Thanks Alexandre Rossi wrote: hs:~# uname -a Linux hs 2.6.32-3-amd64 #1 SMP Wed Feb 24 18:07:42 UTC 2010 x86_64 GNU/Linux Can you reproduce with the latest sid kernel (install linux-image-2.6.32-5-amd64)? -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4bf3633c.7010...@tomsksoft.com
Bug#568755: please backport the macvtap driver
On Mon, 2010-05-17 at 13:55 +0200, Marco d'Itri wrote: On Feb 07, Marco d'Itri m...@linux.it wrote: (The patch is not yet upstream but it is expected to be merged as soon as the next merge window is opened. If you want to wait then the bug can serve as a reminder.) macvtap has been merged in 2.6.34: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=20d29d7a916a47bf533b5709437fe735b6b5b79e Done. Now you owe me a patch for the input/uinput naming thing. :-) Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse. signature.asc Description: This is a digitally signed message part
Processed: tagging 568755
Processing commands for cont...@bugs.debian.org: # Automatically generated email from bts, devscripts version 2.10.35lenny7 tags 568755 + pending Bug #568755 [linux-2.6] please backport the macvtap driver Added tag(s) pending. End of message, stopping processing here. Please contact me if you need assistance. -- 568755: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=568755 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.127424338120496.transcr...@bugs.debian.org