Bug#584744: linux-2.6: radeonfb builtin on sparc and powerpc
Package: linux-2.6 Version: 2.6.32-10 Severity: important Hi, the sid kernel has radeonfb builtin on some archs: debian/config/powerpc/config:CONFIG_FB_RADEON=y debian/config/sparc/config:CONFIG_FB_RADEON=y This is likely to conflict with the fb provided by the radeon drm driver with kms. Maybe they can be made =m instead? Cheers, Julien signature.asc Description: Digital signature
Bug#583949: 2.6.32-3-amd64 can't read DVDs/CDs (sometimes)
I am seeing this bug too on both AMD64 and Alpha architectures. Sometimes DVD plays up with error messages (similar to those given by original reporter; see below) and doesn't seem to recover until a reboot. When the errors start typically I can get the disc mounted (unlike the original reporter) but can't read much from it. My hardware is as follows: AMD64 machine running Debian testing: kernel: 2.6.32-3-amd64 (Debian kernel) SATA controller: 00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) (rev a2) DVD drive: Lite-On ATAPI iHAS120 6 7L0F I tried an old unstable installation (it hasn't been upgraded for 2 or 3 months) that is still hanging around on another partition. It has the 2.6.32-trunk-amd64 Debian kernel and it seemed to work okay, but I really need to test it further to be really sure as I have since discovered that the disc errors may take a few disc changes before they start to appear. Alpha running Debian unstable: kernel: 2.6.34 (compiled from www.kernel.org) SATA controller: 0001:03:09.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) DVD drive: Lite-On ATAPI DVD A DH20A3S 9P54 On the Alpha I took it back to a 2.6.32.7 kernel and still could get the disc errors to appear. To take the kernel back any earlier I will probably have to create a patched kernel (udev didn't create the necessary system disk device nodes when I tried an even earlier kernel -- missing system calls maybe?). This Alpha also has an old Compaq IDE CD-ROM drive which I use for booting. It has also taken to spitting out errors since about 2.6.32 kernel or maybe 2.6.31, but I have really never cared since I only use it for booting and that is working fine. Example of the DVD errors I am getting on the Alpha: [240094.915157] UDF-fs: Partition marked readonly; forcing readonly mount [240094.960079] UDF-fs INFO UDF: Mounting volume 'SPARTACUS', timestamp 2000/11/02 17:15 (1000) [240099.128045] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [240099.128045] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [240099.128045] sr 2:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication [240099.128045] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 26 f4 00 00 40 00 [240099.128045] end_request: I/O error, dev sr0, sector 39888 [240099.128045] quiet_error: 97 callbacks suppressed [240099.128045] Buffer I/O error on device sr0, logical block 9972 [240099.128045] Buffer I/O error on device sr0, logical block 9973 [240099.128045] Buffer I/O error on device sr0, logical block 9974 [240099.128045] Buffer I/O error on device sr0, logical block 9975 [240099.128045] Buffer I/O error on device sr0, logical block 9976 [240099.128045] Buffer I/O error on device sr0, logical block 9977 [240099.129022] Buffer I/O error on device sr0, logical block 9978 [240099.129022] Buffer I/O error on device sr0, logical block 9979 [240099.129022] Buffer I/O error on device sr0, logical block 9980 [240099.129022] Buffer I/O error on device sr0, logical block 9981 [240099.160272] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [240099.160272] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] [240099.160272] sr 2:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication [240099.160272] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 27 34 00 00 20 00 [240099.160272] end_request: I/O error, dev sr0, sector 40144 Cheers Michael. -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c0b7803.4040...@orcon.net.nz
Bug#584744: linux-2.6: radeonfb builtin on sparc and powerpc
On Sun, Jun 06, 2010 at 11:07:51AM +0200, Julien Cristau wrote: the sid kernel has radeonfb builtin on some archs: debian/config/powerpc/config:CONFIG_FB_RADEON=y debian/config/sparc/config:CONFIG_FB_RADEON=y This is likely to conflict with the fb provided by the radeon drm driver with kms. Maybe they can be made =m instead? That is a problem. Both powerpc and sparc have no text console. Bastian -- The face of war has never changed. Surely it is more logical to heal than to kill. -- Surak of Vulcan, The Savage Curtain, stardate 5906.5 -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100606123612.gb19...@wavehammer.waldi.eu.org
Bug#576635: Seems to be resolved already
I'm using now linux-image-2.6.32-5-amd64 (v2.6.32-15), and I do not experience this bug anymore -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c0b9e36.80...@held.org.il
Bug#534598: bisection
Dear Maximilian, the bisecting resulted in + c5a4bcd0cac546c5d776af881c5e913ba4a9922d is the first bad commit commit c5a4bcd0cac546c5d776af881c5e913ba4a9922d Author: Takashi Iwai ti...@suse.de Date: Fri Feb 6 17:22:05 2009 +0100 ALSA: hda - Use digital beep for AD codecs Use digital beep instead of analog pc-beep for AD codecs. Create the beep mixer controls dynamically on demand. Signed-off-by: Takashi Iwai ti...@suse.de :04 04 a8cd08b609a39ff23952d7f475a2a22100c91205 1f01f6ce27db017ed638c05ff2d806d1933babd3 M sound Regards, Martin -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/alpine.deb.2.00.1006061553510.8...@zertz.mathematik.uni-freiburg.de
Bug#584784: /boot/vmlinux-2.6.34-1-4kc-malta: no longer boots in qemu
Package: linux-2.6 Version: 2.6.34-1~experimental.1 Severity: grave File: /boot/vmlinux-2.6.34-1-4kc-malta This kernel no longer boots in qemu 0.12.4+dfsg-1 (boot messages attached). The last version that successfully booted is 2.6.32-9. I haven't yet tested the current unstable kernel. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information system type : MIPS Malta cpu model : MIPS 24Kc V0.0 FPU V0.0 ** PCI devices: 00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. GT-64120/64120A/64121A System Controller [11ab:4620] (rev 10) Subsystem: Qumranet, Inc. Device [1af4:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Interrupt: pin A routed to IRQ 0 Region 0: Memory at unassigned (32-bit, prefetchable) [disabled] Region 1: Memory at 0100 (32-bit, prefetchable) [disabled] [size=16M] Region 2: Memory at ignored (32-bit, non-prefetchable) [disabled] Region 3: Memory at ignored (32-bit, non-prefetchable) [disabled] Region 4: Memory at ignored (32-bit, non-prefetchable) [disabled] Region 5: I/O ports at ignored [disabled] 00:0a.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] Subsystem: Qumranet, Inc. Device [1af4:1100] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 00:0a.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (prog-if 80 [Master]) Subsystem: Qumranet, Inc. Device [1af4:1100] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 01f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 03f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 0170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 0370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at 1040 [size=16] Kernel driver in use: PIIX_IDE 00:0a.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI]) Subsystem: Qumranet, Inc. Device [1af4:1100] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at 1000 [size=32] Kernel driver in use: uhci_hcd 00:0a.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03) Subsystem: Qumranet, Inc. Qemu virtual machine [1af4:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Interrupt: pin A routed to IRQ 0 Kernel driver in use: piix4_smbus 00:0b.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 10) Subsystem: Qumranet, Inc. Device [1af4:1100] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 (1500ns min, 63750ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 1020 [size=32] Region 1: Memory at 12011000 (32-bit, non-prefetchable) [size=32] Kernel driver in use: pcnet32 00:12.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller]) Subsystem: Qumranet, Inc. Device [1af4:1100] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Region 0: Memory at 1000 (32-bit, prefetchable) [size=32M] Region 1: Memory at 1201 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 1200 [disabled] [size=64K] Kernel driver in use: cirrusfb ** USB devices: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental')
Bug#580538: UPDATED Spanish debconf template translation
You are using an old version of the debconf templates. Please use the attached files as a basis for these changes. Please find attached the right one. I don't know if the lang robot is just turning my crazy. -- Omar Campagne Polaino # linux-2.6 po-debconf translation to Spanish # This file is distributed under the same license as the linux-2.6 package. # # Changes: #- Initial translation #Omar Campagne ocampa...@gmail.com 2010 #- Updates # TRANSLATOR # # Traductores, si no conocen el formato PO, merece la pena leer la # documentación de gettext, especialmente las secciones dedicadas a este # formato, por ejemplo ejecutando: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Equipo de traducción al español, por favor lean antes de traducir # los siguientes documentos: # # - El proyecto de traducción de Debian al español # http://www.debian.org/intl/spanish/ # especialmente las notas y normas de traducción en # http://www.debian.org/intl/spanish/notas # # - La guía de traducción de po's de debconf: # /usr/share/doc/po-debconf/README-trans # o http://www.debian.org/intl/l10n/po-debconf/README-trans # msgid msgstr Project-Id-Version: linux-2.6 2.6.32+5\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2010-04-23 22:14+0200\n PO-Revision-Date: 2010-06-06 19:04+0200\n Last-Translator: Omar Campagne ocampa...@gmail.com\n Language-Team: Debian l10n Spanish debian-l10n-span...@lists.debian.org\n Language: es\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n Plural-Forms: nplurals=2; plural=(n != 1);\n X-Generator: Virtaal 0.6.1\n #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid Update disk device IDs in system configuration? msgstr ¿Desea actualizar los identificadores de los dispositivos de disco en la configuración del sistema? #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid The new Linux kernel version provides different drivers for some PATA (IDE) controllers. The names of some hard disk, CD-ROM, and tape devices may change. msgstr La nueva versión del núcleo Linux proporciona controladores diferentes para algunos controladores PATA (IDE). Puede que cambien los nombres de algunos dispositivos de disco duro, disco óptico y de cinta. #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid It is now recommended to identify disk devices in configuration files by label or UUID (unique identifier) rather than by device name, which will work with both old and new kernel versions. msgstr Se recomienda identificar los dispositivos de disco en los ficheros de configuración mediante la etiqueta o el UUID (identificador único), en lugar del nombre de dispositivo, lo cual funcionará con las versiones antiguas y recientes del núcleo. #. Type: boolean #. Description #: ../linux-base.templates:2001 msgid If you choose to not update the system configuration automatically, you must update device IDs yourself before the next system reboot or the system may become unbootable. msgstr Si selecciona no actualizar la configuración del sistema automáticamente, tendrá que actualizar los identificadores de dispositivo manualmente antes del siguiente arranque del sistema, o puede que el sistema no pueda arrancar. #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid Apply configuration changes to disk device IDs? msgstr ¿Desea realizar estos cambios en la configuración de los identificadores de dispositivos de disco? #. Type: boolean #. Description #: ../linux-base.templates:3001 msgid These devices will be assigned UUIDs or labels: msgstr Se van a asignar etiquetas o UUID a los siguientes dispositivos: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid These configuration files will be updated: msgstr Se van a actualizar los siguientes ficheros de configuración: #. Type: boolean #. Description #. Type: boolean #. Description #: ../linux-base.templates:3001 ../linux-base.templates:4001 msgid The device IDs will be changed as follows: msgstr Se van a modificar los identificadores de dispositivo de la siguiente forma: #. Type: error #. Description #: ../linux-base.templates:5001 msgid Configuration files still contain deprecated device names msgstr Los ficheros de configuración aún contienen nombres obsoletos de dispositivo #. Type: error #. Description #: ../linux-base.templates:5001 msgid The following configuration files still use some device names that may change when using the new kernel: msgstr Los siguientes ficheros de configuración aún usan algunos nombres de dispositivo que pueden cambiar al usar el núcleo nuevo: #. Type: error #. Description #: ../linux-base.templates:6001 msgid Boot loader configuration check needed msgstr Se necesita comprobar la
Processed: also applies to unstable
Processing commands for cont...@bugs.debian.org: found 584784 2.6.32-15 Bug #584784 [linux-2.6] /boot/vmlinux-2.6.34-1-4kc-malta: no longer boots in qemu There is no source info for the package 'linux-2.6' at version '2.6.32-15' with architecture '' Unable to make a source version for version '2.6.32-15' Bug Marked as found in versions 2.6.32-15. thanks Stopping processing here. Please contact me if you need assistance. -- 584784: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=584784 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12758459333174.transcr...@bugs.debian.org
Processed: tagging 392592
Processing commands for cont...@bugs.debian.org:
# Automatically generated email from bts, devscripts version 2.10.35lenny7
tags 392592 + pending
Bug #392592 {Done: Ben Hutchings b...@decadent.org.uk} [src:linux-2.6]
linux-headers-2.6.18-1-mckinley: ia64 misses some scripts when building
external modules
Added tag(s) pending.
End of message, stopping processing here.
Please contact me if you need assistance.
--
392592: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=392592
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/handler.s.c.12758467309634.transcr...@bugs.debian.org
Processed: tagging 582224
Processing commands for cont...@bugs.debian.org:
# Automatically generated email from bts, devscripts version 2.10.35lenny7
tags 582224 + pending
Bug #582224 {Done: Ben Hutchings b...@decadent.org.uk} [linux-2.6] linux-2.6:
[ia64] Please enable CONFIG_MSPEC
Added tag(s) pending.
End of message, stopping processing here.
Please contact me if you need assistance.
--
582224: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582224
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/handler.s.c.12758467339666.transcr...@bugs.debian.org
Processed: tagging 566208
Processing commands for cont...@bugs.debian.org:
# Automatically generated email from bts, devscripts version 2.10.35lenny7
tags 566208 + pending
Bug #566208 {Done: Ben Hutchings b...@decadent.org.uk}
[linux-image-2.6.26-2-486] linux-image-2.6.26-2-486: e_powersaver causes
constant lockups
Added tag(s) pending.
End of message, stopping processing here.
Please contact me if you need assistance.
--
566208: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=566208
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/handler.s.c.12758467439782.transcr...@bugs.debian.org
Processed: tagging 582810
Processing commands for cont...@bugs.debian.org:
# Automatically generated email from bts, devscripts version 2.10.35lenny7
tags 582810 + pending
Bug #582810 {Done: Ben Hutchings b...@decadent.org.uk} [linux-2.6] install
vmlinux into /usr/lib/debug/boot/
Added tag(s) pending.
End of message, stopping processing here.
Please contact me if you need assistance.
--
582810: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582810
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/handler.s.c.12758467469815.transcr...@bugs.debian.org
Processed: tagging 578262
Processing commands for cont...@bugs.debian.org:
# Automatically generated email from bts, devscripts version 2.10.35lenny7
tags 578262 + pending
Bug #578262 {Done: Ben Hutchings b...@decadent.org.uk} [linux-2.6] iwlwifi
compatibility problem with non-QoS APs
Bug #578263 {Done: Ben Hutchings b...@decadent.org.uk} [linux-2.6] iwlwifi
compatibility problem with non-QoS APs
Added tag(s) pending.
Added tag(s) pending.
End of message, stopping processing here.
Please contact me if you need assistance.
--
578262: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=578262
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/handler.s.c.12758467379714.transcr...@bugs.debian.org
Processed: tagging 508108
Processing commands for cont...@bugs.debian.org:
# Automatically generated email from bts, devscripts version 2.10.35lenny7
tags 508108 + pending
Bug #508108 {Done: maximilian attems m...@debian.org} [linux-2.6] Please
enable XVR-500 and XVR-2500 fb drivers for sparc
Bug #584429 {Done: maximilian attems m...@debian.org} [linux-2.6]
linux-image-2.6.32-3-sparc64-smp: XVR-500 and XVR-2500 drivers need to be
re-enabled per bug #508108
Ignoring request to alter tags of bug #508108 to the same tags previously set
Ignoring request to alter tags of bug #584429 to the same tags previously set
End of message, stopping processing here.
Please contact me if you need assistance.
--
508108: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508108
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/handler.s.c.12758467519858.transcr...@bugs.debian.org
Processed: tagging 559406
Processing commands for cont...@bugs.debian.org: # Automatically generated email from bts, devscripts version 2.10.35lenny7 tags 559406 + pending Bug #559406 [src:linux-2.6] Yorick doesn't catch SIGFPE on HPPA Ignoring request to alter tags of bug #559406 to the same tags previously set End of message, stopping processing here. Please contact me if you need assistance. -- 559406: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=559406 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12758467559903.transcr...@bugs.debian.org
Processed: tagging 536537
Processing commands for cont...@bugs.debian.org: # Automatically generated email from bts, devscripts version 2.10.35lenny7 tags 536537 + pending Bug #536537 [linux-2.6] linux-image-2.6.30-1-686: reboot fails with a Fit-PC2 Ignoring request to alter tags of bug #536537 to the same tags previously set End of message, stopping processing here. Please contact me if you need assistance. -- 536537: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=536537 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12758467599950.transcr...@bugs.debian.org
Bug#584784: also applies to unstable
found 584784 2.6.32-15 thanks Hi! Unfortunately, this bug also applies to unstable, only current testing kernel is unaffected. WM -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c0bdd20.5050...@wm1.at
Processed: tagging 580538
Processing commands for cont...@bugs.debian.org: # Automatically generated email from bts, devscripts version 2.10.35lenny7 tags 580538 + pending Bug #580538 [linux-2.6] UPDATED Spanish debconf template translation Ignoring request to alter tags of bug #580538 to the same tags previously set End of message, stopping processing here. Please contact me if you need assistance. -- 580538: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580538 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.127584822621739.transcr...@bugs.debian.org
Processed: reassign 584762 to linux-2.6
Processing commands for cont...@bugs.debian.org: reassign 584762 linux-2.6 Bug #584762 [hal] xfce4-power-manager: Not enough brightness levels Bug reassigned from package 'hal' to 'linux-2.6'. thanks Stopping processing here. Please contact me if you need assistance. -- 584762: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=584762 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.127584914527951.transcr...@bugs.debian.org
Processing of linux-2.6_2.6.34-1~experimental.2_all.changes
linux-2.6_2.6.34-1~experimental.2_all.changes uploaded successfully to localhost along with the files: linux-2.6_2.6.34-1~experimental.2.dsc linux-2.6_2.6.34-1~experimental.2.diff.gz linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb linux-source-2.6.34_2.6.34-1~experimental.2_all.deb linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb firmware-linux-free_2.6.34-1~experimental.2_all.deb linux-base_2.6.34-1~experimental.2_all.deb Greetings, Your Debian queue daemon (running on host ries.debian.org) -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/e1ollqj-0008u4...@ries.debian.org
Bug#583653: xserver-xorg-video-radeon: 15x-slower performance regression in KMS mode for 2D operations
On Mon, May 31, 2010 at 09:47:17AM +0200, Michel Dänzer wrote: On Mon, 2010-05-31 at 09:43 +0200, Michel Dänzer wrote: reassign 583653 linux-2.6 2.6.32-13 kthxbye On Sam, 2010-05-29 at 17:33 +0200, Sylvain Beucler wrote: On Sat, May 29, 2010 at 04:21:46PM +0200, Michel Dänzer wrote: On Sam, 2010-05-29 at 15:02 +0200, Sylvain Beucler wrote: On Sat, May 29, 2010 at 01:05:36PM +0200, Michel Dänzer wrote: On Sam, 2010-05-29 at 10:21 +0200, Sylvain Beucler wrote: The attached simple test runs at 17FPS in KMS mode on my computer, against 300FPS in non-KMS mode. Forgot to mention: sysprof or oprofile profiles of slow and fast runs might be interesting, at least if the CPU is pegged during the runs. Here are 2 sysprof runs: - UMS / fast: - kernel 11.25% - X 77.20% - KMS / slow: - kernel 90.28% - X 5.79% Unfortunately, there's no information about where in the kernel the cycles are burnt. This information should be available with sysprof 1.1.x and a kernel with the performance counter/event framework. Quite a nice tool: __libc_start_main 0,00% 93,67% _start 0,02% 87,66% In file /usr/bin/Xorg 0,13% 87,64% In file /usr/lib/xorg/modules/libexa.so 0,04% 86,60% In file /usr/lib/xorg/modules/drivers/radeon_drv.so0,08% 86,48% radeon_bo_open 0,00% 79,87% In file /usr/lib/libdrm_radeon.so.1.0.00,00% 79,87% drmCommandWriteRead 0,00% 79,86% __kernel_vsyscall 0,00% 79,86% - - kernel - - 0,00% 79,86% on_each_cpu 36,81% 36,81% __purge_vmap_area_lazy20,31% 20,31% flush_all_zero_pkmaps 7,84% 7,84% vm_unmap_aliases 1,65% 1,65% What do you think that means? I think it could confirm my suspicion below, reassigning to the kernel. Would be great if you could try if it's better with a 2.6.33 or 2.6.34 kernel. Anyway, this probably means it's an issue in the kernel, not the X driver. May be solved already in newer kernels, there have been some AGP performance improvements which I'm not sure have made it into Debian's 2.6.32 DRM backport. BTW, does booting the kernel with radeon.agpmode=-1 work around the problem? It'll make things slower in general but it looks like it should help for this problem, which would further confirm the above. The test runs at 65FPS with radeon.agpmode=-1 (~3-4x faster than without this option, but ~4-5x slower than without KMS). -- Sylvain -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100606203354.ga2...@perso.beuc.net
Processed: found 534598 in 2.6.30-1
Processing commands for cont...@bugs.debian.org: found 534598 2.6.30-1 Bug #534598 [linux-2.6] linux-image-2.6.30-1-686: console does not beep There is no source info for the package 'linux-2.6' at version '2.6.30-1' with architecture '' Unable to make a source version for version '2.6.30-1' Bug Marked as found in versions 2.6.30-1. thanks Stopping processing here. Please contact me if you need assistance. -- 534598: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=534598 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12758585702769.transcr...@bugs.debian.org
Processed: tagging 584724, bug 584724 is forwarded to https://bugzilla.kernel.org/show_bug.cgi?id=11663
Processing commands for cont...@bugs.debian.org: tags 584724 upstream Bug #584724 [linux-2.6] linux-image-2.6.32-5-amd64: NETDEV WATCHDOG: (via-rhine): transmit queue 0 timed out Added tag(s) upstream. forwarded 584724 https://bugzilla.kernel.org/show_bug.cgi?id=11663 Bug #584724 [linux-2.6] linux-image-2.6.32-5-amd64: NETDEV WATCHDOG: (via-rhine): transmit queue 0 timed out Set Bug forwarded-to-address to 'https://bugzilla.kernel.org/show_bug.cgi?id=11663'. thanks Stopping processing here. Please contact me if you need assistance. -- 584724: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=584724 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12758594659018.transcr...@bugs.debian.org
linux-2.6_2.6.34-1~experimental.2_all.changes ACCEPTED
Accepted: firmware-linux-free_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.34-1~experimental.2_all.deb linux-2.6_2.6.34-1~experimental.2.diff.gz to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.diff.gz linux-2.6_2.6.34-1~experimental.2.dsc to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.dsc linux-base_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-base_2.6.34-1~experimental.2_all.deb linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb linux-source-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-source-2.6.34_2.6.34-1~experimental.2_all.deb linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb Override entries for your package: firmware-linux-free_2.6.34-1~experimental.2_all.deb - optional kernel linux-2.6_2.6.34-1~experimental.2.dsc - source devel linux-base_2.6.34-1~experimental.2_all.deb - optional kernel linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb - optional doc linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb - optional doc linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb - optional kernel linux-source-2.6.34_2.6.34-1~experimental.2_all.deb - optional kernel linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb - optional devel Announcing to debian-devel-chan...@lists.debian.org Closing bugs: 392592 508108 536537 559406 566208 578262 580740 582224 582637 582808 582810 Thank you for your contribution to Debian. -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/e1olnzc-00020d...@ries.debian.org
Bug#508108: marked as done (Please enable XVR-500 and XVR-2500 fb drivers for sparc)
Your message dated Sun, 06 Jun 2010 21:39:38 +
with message-id e1olnzc-00020q...@ries.debian.org
and subject line Bug#508108: fixed in linux-2.6 2.6.34-1~experimental.2
has caused the Debian Bug report #508108,
regarding Please enable XVR-500 and XVR-2500 fb drivers for sparc
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
508108: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508108
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
---BeginMessage---
Package: linux-2.6
Version: 2.6.26-11
Severity: wishlist
We have recently found out that Debian installation UI looks much
better on various SunBlade systems if the framebuffer drivers for
XVR-500 and XVR-2500 cards (CONFIG_FB_XVR500, CONFIG_FB_XVR2500) are
enabled [0,1]. If there is going to be another kernel rebuild before
lenny, it would be great to enable these drivers. As cards are
sparc-specific, it is sufficient to enable them for sparc. Also, it
would be nice to apply the attached simple patch, which adds the PCI
ID of a card I have in my SunBlade 1000 [1], it appears that it's the
same chip (same device ID), but manufactured by a different company.
I've sent the patch to David Miller to be included upstream, however
haven't heard back yet [2].
[0] http://lists.debian.org/debian-boot/2008/12/msg00040.html
[1] http://lists.debian.org/debian-boot/2008/12/msg00042.html
[2] http://marc.info/?l=linux-sparcm=122816564110952w=2
--
Jurij Smakov ju...@wooyd.org
Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC
diff -aur a/drivers/video/sunxvr500.c b/drivers/video/sunxvr500.c
--- a/drivers/video/sunxvr500.c 2008-11-20 18:02:37.0 -0500
+++ b/drivers/video/sunxvr500.c 2008-12-01 15:43:04.0 -0500
@@ -396,6 +396,7 @@
static struct pci_device_id e3d_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a0), },
+ { PCI_DEVICE(PCI_VENDOR_ID_IGRAPH, 0x7a0), },
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a2), },
{ .vendor = PCI_VENDOR_ID_3DLABS,
.device = PCI_ANY_ID,
diff -aur a/include/linux/pci_ids.h b/include/linux/pci_ids.h
--- a/include/linux/pci_ids.h 2008-11-20 18:02:37.0 -0500
+++ b/include/linux/pci_ids.h 2008-12-01 15:43:04.0 -0500
@@ -930,6 +930,8 @@
#define PCI_DEVICE_ID_SUN_TOMATILLO 0xa801
#define PCI_DEVICE_ID_SUN_CASSINI 0xabba
+#define PCI_VENDOR_ID_IGRAPH 0x1091
+
#define PCI_VENDOR_ID_CMD 0x1095
#define PCI_DEVICE_ID_CMD_643 0x0643
#define PCI_DEVICE_ID_CMD_646 0x0646
---End Message---
---BeginMessage---
Source: linux-2.6
Source-Version: 2.6.34-1~experimental.2
We believe that the bug you reported is fixed in the latest version of
linux-2.6, which is due to be installed in the Debian FTP archive:
firmware-linux-free_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/firmware-linux-free_2.6.34-1~experimental.2_all.deb
linux-2.6_2.6.34-1~experimental.2.diff.gz
to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.diff.gz
linux-2.6_2.6.34-1~experimental.2.dsc
to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.dsc
linux-base_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-base_2.6.34-1~experimental.2_all.deb
linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb
linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb
linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb
linux-source-2.6.34_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-source-2.6.34_2.6.34-1~experimental.2_all.deb
linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 508...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Ben Hutchings b...@decadent.org.uk (supplier of updated linux-2.6 package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@debian.org)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Format: 1.8
Date: Sun, 06 Jun 2010 18:53:04 +0100
Source: linux-2.6
Binary: linux-source-2.6.34 linux-doc-2.6.34 linux-manual-2.6.34
Bug#584429: marked as done (linux-image-2.6.32-3-sparc64-smp: XVR-500 and XVR-2500 drivers need to be re-enabled per bug #508108)
Your message dated Sun, 06 Jun 2010 21:39:38 + with message-id e1olnzc-00020q...@ries.debian.org and subject line Bug#508108: fixed in linux-2.6 2.6.34-1~experimental.2 has caused the Debian Bug report #508108, regarding linux-image-2.6.32-3-sparc64-smp: XVR-500 and XVR-2500 drivers need to be re-enabled per bug #508108 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 508108: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508108 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.32-9 Severity: normal It appears the fix for bug #508108 has been regressed. It appears that CONFIG_FB_XVR500 and CONFIG_FB_XVR2500 are no longer set in newer kernels than the kernel shipped with Lenny (linux-image-2.6.26-2-sparc64-smp). This causes workstations to because unresponsive at the console when the kernel attempts to handoff the console output to the framebuffer in newer versions of the kernel (linux-image-2.6.32-3-sparc64-smp). In order to fix this problem, I had to use a serial console on the workstation and recompile the kernel with both options re-enabled and everything works fine. Please restore this functionality to future kernels. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information cpu : TI UltraSparc IIIi (Jalapeno) fpu : UltraSparc IIIi integrated FPU pmu : ultra3i prom: OBP 4.30.4.a 2010/01/06 14:46 type: sun4u ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 146.91.232.84 netmask 255.255.252.0 network 146.91.232.0 broadcast 146.91.235.255 gateway 146.91.232.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 146.91.232.76 dns-search ced.corp.cummins.com ** PCI devices: :00:03.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet [14e4:1647] Subsystem: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet [14e4:1647] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 6 Region 0: Memory at 0020 (64-bit, non-prefetchable) [size=2M] Region 2: [virtual] Memory at f831 (32-bit, non-prefetchable) [size=1] Region 3: [virtual] Memory at f831 (32-bit, non-prefetchable) [size=1] Region 4: [virtual] Memory at f831 (32-bit, non-prefetchable) [size=1] Region 5: [virtual] Memory at f831 (32-bit, non-prefetchable) [size=1] Expansion ROM at f831 [disabled] [size=1] Capabilities: access denied Kernel driver in use: tg3 0001:00:04.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1010 66MHz Ultra3 SCSI Adapter [1000:0021] (rev 01) Subsystem: LSI Logic / Symbios Logic LSI53C1000/1000R/1010R/1010-66 PCI to Ultra160 SCSI Controller [1000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 64 (4250ns min, 4500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 12 Region 0: I/O ports at 0300 [size=256] Region 1: Memory at 0010 (64-bit, non-prefetchable) [size=8K] Region 3: Memory at 00102000 (64-bit, non-prefetchable) [size=8K] Region 5: [virtual] Memory at f839 (32-bit, non-prefetchable) [size=1] [virtual] Expansion ROM at f839 [disabled] [size=1] Capabilities: access denied Kernel driver in use: sym53c8xx 0001:00:04.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1010 66MHz Ultra3 SCSI Adapter [1000:0021] (rev 01) Subsystem: LSI Logic / Symbios Logic LSI53C1000/1000R/1010R/1010-66 PCI to Ultra160 SCSI Controller [1000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+
Bug#392592: marked as done (linux-headers-2.6.18-1-mckinley: ia64 misses some scripts when building external modules)
Your message dated Sun, 06 Jun 2010 21:39:38 + with message-id e1olnzc-00020l...@ries.debian.org and subject line Bug#392592: fixed in linux-2.6 2.6.34-1~experimental.2 has caused the Debian Bug report #392592, regarding linux-headers-2.6.18-1-mckinley: ia64 misses some scripts when building external modules to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 392592: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=392592 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-headers-2.6.18-1-mckinley Version: 2.6.18-2 Severity: normal Hi, When trying to compile external modules on Debian's 2.6.18 kernel (and .17 too, and maybe others) on IA64/McKinley ItaniumII, the Makefile in arch/ia64/ misses some scripts: make -C /usr/src/linux-headers-2.6.18-1-mckinley/ M=$PWD /bin/sh: /usr/src/linux-headers-2.6.18-1-mckinley/arch/ia64/scripts/toolchain-flags: No such file or directory /bin/sh: /usr/src/linux-headers-2.6.18-1-mckinley/arch/ia64/scripts/check-gas: No such file or directory make[1]: Entering directory `/usr/src/linux-headers-2.6.18-1-mckinley' CC [M] /home/bgoglin/test/test.o [...] The script/ link in the 2.6.18-1-mckinley's headers looks fine: /usr/src/linux-headers-2.6.18-1-mckinley/arch/ia64/scripts - ../../../linux-headers-2.6.18-1/arch/ia64/scripts But the destination does not exists in /usr/src/linux-headers-2.6.18-1/arch/ia64/. toolchain-flags is used by arch/ia64/Makefile to define CPPFLAGS, which looks pretty important to me. check-gas checks whether gas is recent enough, which looks pretty important too. I tried to copy those missing scripts from the kernel source into linux-headers-2.6.18-1/arch/ia64/scripts, but I get some other warnings then: make -C /usr/src/linux-headers-2.6.18-1-mckinley/ M=$PWD gcc-4.1: /usr/src/linux-headers-2.6.18-1-mckinley/arch/ia64/scripts/check-segrel.S: No such file or directory objdump: '/tmp/out19575': No such file /usr/src/linux-headers-2.6.18-1-mckinley/arch/ia64/scripts/toolchain-flags: line 19: [: !=: unary operator expected gcc-4.1: /usr/src/linux-headers-2.6.18-1-mckinley/arch/ia64/scripts/check-text-align.S: No such file or directory gcc-4.1: no input files readelf: Error: '/tmp/out19575': No such file gcc-4.1: /usr/src/linux-headers-2.6.18-1-mckinley/arch/ia64/scripts/check-gas-asm.S: No such file or directorygcc-4.1: no input files objdump: '/tmp/out19593.o': No such file /usr/src/linux-headers-2.6.18-1-mckinley/arch/ia64/scripts/check-gas: line 10: [: !=: unary operator expected Copying the entire arch/ia64/scripts/ directory from a source tree seems to fix all the issues. So I guess one package should bring this directory, either linux-headers or the linux-kbuild. Thanks, Brice -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: ia64 Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-mckinley Locale: lang=fr...@euro, lc_ctype=fr...@euro (charmap=ISO-8859-15) Versions of packages linux-headers-2.6.18-1-mckinley depends on: ii gcc-4.1 4.1.1-13 The GNU C compiler ii linux-headers-2.6.18-12.6.18-2 Common header files for Linux 2.6. ii linux-kbuild-2.6.18 2.6.18-1 Kbuild infrastructure for Linux 2. linux-headers-2.6.18-1-mckinley recommends no packages. -- no debconf information ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.34-1~experimental.2 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.34-1~experimental.2_all.deb linux-2.6_2.6.34-1~experimental.2.diff.gz to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.diff.gz linux-2.6_2.6.34-1~experimental.2.dsc to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.dsc linux-base_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-base_2.6.34-1~experimental.2_all.deb linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb
Bug#536537: marked as done (linux-image-2.6.30-1-686: reboot fails with a Fit-PC2)
Your message dated Sun, 06 Jun 2010 21:39:38 + with message-id e1olnzc-00020w...@ries.debian.org and subject line Bug#536537: fixed in linux-2.6 2.6.34-1~experimental.2 has caused the Debian Bug report #536537, regarding linux-image-2.6.30-1-686: reboot fails with a Fit-PC2 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 536537: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=536537 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.30-1-686 Version: 2.6.30-2 Severity: minor *** Please type your report below this line *** fit-pc2 is a small Intel-Atomm-based computer. See: http://fit-pc2.com/wiki/index.php?title=Fit-PC2_Specifications The system hangs on reboot. A workaround is to use 'reboot=b' in the kernel command-line. Upstream suggests a patch to automate that: http://www.fit-pc2.com/forum/viewtopic.php?f=9t=301 Is such a patch (using CONFIG_X86_REBOOTFIXUPS=yes) acceptable? Any other specific information on the system that you need? -- Package-specific info: ** Version: Linux version 2.6.30-1-686 (Debian 2.6.30-2) (wa...@debian.org) (gcc version 4.3.3 (Debian 4.3.3-13) ) #1 SMP Wed Jul 8 14:39:46 UTC 2009 ** Command line: root=/dev/sda7 ro quiet reboot=b ** Not tainted ** Kernel log: [2.427526] usbhid: v2.6:USB HID core driver [2.436279] sda9 sda10 [2.472685] sd 0:0:0:0: [sda] Attached SCSI disk [3.443191] kjournald starting. Commit interval 5 seconds [3.443225] EXT3-fs: mounted filesystem with ordered data mode. [4.691051] udev: starting version 141 [4.896102] ACPI: AC Adapter [ADP1] (on-line) [4.916841] ACPI: SSDT 3f6b80ca 00245 (v02 PmRef Cpu0Ist 3000 INTL 20050624) [4.917623] ACPI: SSDT 3f6b7a06 0063F (v02 PmRef Cpu0Cst 3001 INTL 20050624) [4.919848] Monitor-Mwait will be used to enter C-1 state [4.920854] Monitor-Mwait will be used to enter C-2 state [4.936808] Monitor-Mwait will be used to enter C-3 state [4.937557] ACPI: Battery Slot [BAT0] (battery present) [4.937914] ACPI: Battery Slot [BAT1] (battery absent) [4.938122] ACPI: Battery Slot [BAT2] (battery absent) [4.956253] Monitor-Mwait will be used to enter C-3 state [4.956297] Marking TSC unstable due to TSC halts in idle [4.956529] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [4.956640] processor ACPI_CPU:00: registered as cooling_device1 [4.956662] ACPI: Processor [CPU0] (supports 8 throttling states) [4.956897] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [4.956916] ACPI: Power Button [PWRF] [4.956933] ACPI Error (evxfevnt-0193): Could not enable PowerButton event [20090320] [4.956948] ACPI Warning (evxface-0146): Could not enable fixed event 2 [20090320] [4.968288] button: probe of LNXPWRBN:00 failed with error -22 [4.968518] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [4.968681] ACPI: Lid Switch [LID0] [4.968909] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [4.968928] ACPI: Power Button [PWRB] [4.970859] ACPI: SSDT 3f6b830f 000D4 (v02 PmRef Cpu1Ist 3000 INTL 20050624) [4.971547] ACPI: SSDT 3f6b8045 00085 (v02 PmRef Cpu1Cst 3000 INTL 20050624) [4.977186] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [4.977303] processor ACPI_CPU:01: registered as cooling_device2 [4.977321] ACPI: Processor [CPU1] (supports 8 throttling states) [5.333088] input: PC Speaker as /devices/platform/pcspkr/input/input6 [5.486290] Error: Driver 'pcspkr' is already registered, aborting... [5.771124] HDA Intel :00:1b.0: PCI INT A - GSI 22 (level, low) - IRQ 22 [5.771208] HDA Intel :00:1b.0: setting latency timer to 64 [5.904005] input: HDA Digital PCBeep as /devices/pci:00/:00:1b.0/input/input7 [6.000229] Clocksource tsc unstable (delta = -75541890 ns) [7.099673] Adding 1984016k swap on /dev/sda2. Priority:-1 extents:1 across:1984016k [7.223134] EXT3 FS on sda7, internal journal [8.706792] kjournald starting. Commit interval 5 seconds [8.707542] EXT3 FS on sda5, internal journal [8.707568] EXT3-fs: mounted filesystem with ordered data mode. [ 113.083300] r8169: eth0: link up [ 113.083311] r8169: eth0: link up [ 123.288207] eth0: no IPv6 routers present [ 460.952311] usb 3-2: USB disconnect, address 2 [ 627.768272] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 627.936503] usb 3-2: New USB device found, idVendor=04d9, idProduct=1400 [
Bug#559406: marked as done (Yorick doesn't catch SIGFPE on HPPA)
Your message dated Sun, 06 Jun 2010 21:39:38 + with message-id e1olnzc-000211...@ries.debian.org and subject line Bug#559406: fixed in linux-2.6 2.6.34-1~experimental.2 has caused the Debian Bug report #559406, regarding Yorick doesn't catch SIGFPE on HPPA to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 559406: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=559406 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: yorick Version: 2.1.05+dfsg+cvs20091202-1 Severity: serious User: debian-h...@lists.debian.org Usertags: hppa yorick_2.1.05+dfsg+cvs20091202-1 reliably fails to build on hppa: https://buildd.debian.org/build.php?pkg=yorickver=2.1.05%2Bdfsg%2Bcvs20091202-1arch=hppafile=log From the most recent build attempt: [...] touch build-stamp /usr/bin/fakeroot debian/rules binary-arch dh_testdir relocate/bin/yorick -batch debian/check.i Begin Yorick parser test... Test 17x10x10 binary operators... Test unary operators... Test array manipulation functions... Test struct instancing and indexing... Test range functions... Test math functions... Test informational functions... Test func declarations... Test binary I/O functions... Test binary I/O to netCDF... Test ASCII I/O functions... Test string manipulation functions... Test list functions... Test catch function... make: *** [check] Floating point exception dpkg-buildpackage: error: /usr/bin/fakeroot debian/rules binary-arch gave error exit status 2 ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.34-1~experimental.2 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.34-1~experimental.2_all.deb linux-2.6_2.6.34-1~experimental.2.diff.gz to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.diff.gz linux-2.6_2.6.34-1~experimental.2.dsc to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.dsc linux-base_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-base_2.6.34-1~experimental.2_all.deb linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb linux-source-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-source-2.6.34_2.6.34-1~experimental.2_all.deb linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 559...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Ben Hutchings b...@decadent.org.uk (supplier of updated linux-2.6 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Sun, 06 Jun 2010 18:53:04 +0100 Source: linux-2.6 Binary: linux-source-2.6.34 linux-doc-2.6.34 linux-manual-2.6.34 linux-patch-debian-2.6.34 firmware-linux-free linux-support-2.6.34-1 linux-base linux-libc-dev linux-headers-2.6.34-1-all linux-headers-2.6.34-1-all-alpha linux-headers-2.6.34-1-common linux-image-2.6.34-1-alpha-generic linux-headers-2.6.34-1-alpha-generic linux-image-2.6.34-1-alpha-smp linux-headers-2.6.34-1-alpha-smp linux-image-2.6.34-1-alpha-legacy linux-headers-2.6.34-1-alpha-legacy linux-headers-2.6.34-1-all-amd64 linux-image-2.6.34-1-amd64 linux-headers-2.6.34-1-amd64 linux-image-2.6.34-1-amd64-dbg linux-headers-2.6.34-1-all-armel linux-image-2.6.34-1-iop32x linux-headers-2.6.34-1-iop32x linux-image-2.6.34-1-ixp4xx linux-headers-2.6.34-1-ixp4xx linux-image-2.6.34-1-kirkwood linux-headers-2.6.34-1-kirkwood linux-image-2.6.34-1-orion5x linux-headers-2.6.34-1-orion5x linux-image-2.6.34-1-versatile linux-headers-2.6.34-1-versatile linux-headers-2.6.34-1-all-hppa linux-image-2.6.34-1-parisc linux-headers-2.6.34-1-parisc linux-image-2.6.34-1-parisc-smp linux-headers-2.6.34-1-parisc-smp
Bug#580740: marked as done (linux-image-2.6.33-2-amd64: 0bda:8171 Realtek USB WiFi unsupported)
Your message dated Sun, 06 Jun 2010 21:39:38 + with message-id e1olnzc-00021k...@ries.debian.org and subject line Bug#580740: fixed in linux-2.6 2.6.34-1~experimental.2 has caused the Debian Bug report #580740, regarding linux-image-2.6.33-2-amd64: 0bda:8171 Realtek USB WiFi unsupported to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580740: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580740 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.33-1~experimental.4 Severity: normal As found on the web the device is supposedly supported by kernels 2.6.32 and later but no driver is loaded. http://blog.xff.lt/ -- Package-specific info: ** Version: Linux version 2.6.33-2-amd64 (Debian 2.6.33-1~experimental.4) (m...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Mar 17 18:41:49 UTC 2010 ** Command line: root=LABEL=placka- ro quiet ** Not tainted ** Kernel log: [600113.700016] usb 1-1: new high speed USB device using ehci_hcd and address 2 [600113.834407] usb 1-1: New USB device found, idVendor=0bda, idProduct=8171 [600113.834412] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [600113.834416] usb 1-1: Product: RTL8188S WLAN Adapter [600113.834419] usb 1-1: Manufacturer: Manufacturer Realtek ** Model information sys_vendor: product_name: product_version: chassis_vendor: chassis_version: bios_vendor: Intel Corp. bios_version: LY66210M.86A.0122.2007.0822.2001 board_vendor: Intel Corporation board_name: D201GLY board_version: AAE14305-401 ** Loaded modules: Module Size Used by ppdev 5565 0 lp 8201 0 bridge 39813 0 stp 1440 1 bridge xt_mark 917 1 xt_length 1164 2 xt_MARK 917 34 cls_fw 3545 5 sch_sfq 4718 5 sch_htb12006 1 iptable_mangle 2849 1 xt_tcpudp 2319 56 xt_conntrack2407 6 xt_state1303 4 xt_dscp 1611 0 xt_DSCP 1995 0 xt_CLASSIFY 925 0 ipt_LOG 4518 2 ipt_REJECT 1953 0 xt_owner1063 5 nf_nat_ftp 2063 0 nf_conntrack_ftp5569 1 nf_nat_ftp nf_nat_sip 4966 0 nf_conntrack_sip 13578 1 nf_nat_sip nf_nat_h323 5127 0 nf_conntrack_h323 37024 1 nf_nat_h323 nf_nat_pptp 2066 0 nf_conntrack_pptp 3865 1 nf_nat_pptp nf_conntrack_proto_gre 3491 1 nf_conntrack_pptp nf_nat_proto_gre1245 1 nf_nat_pptp nf_nat_irc 1398 0 nf_conntrack_irc3379 1 nf_nat_irc iptable_filter 2290 1 iptable_nat 4363 1 ipt_MASQUERADE 1554 1 nf_nat 13532 8 nf_nat_ftp,nf_nat_sip,nf_nat_h323,nf_nat_pptp,nf_nat_proto_gre,nf_nat_irc,iptable_nat,ipt_MASQUERADE xt_multiport2267 0 xt_iprange 1433 0 nf_conntrack_ipv4 9705 13 iptable_nat,nf_nat nf_conntrack 45895 17 xt_conntrack,xt_state,nf_nat_ftp,nf_conntrack_ftp,nf_nat_sip,nf_conntrack_sip,nf_nat_h323,nf_conntrack_h323,nf_nat_pptp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_nat_irc,nf_conntrack_irc,iptable_nat,ipt_MASQUERADE,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 ip_tables 14114 3 iptable_mangle,iptable_filter,iptable_nat x_tables 12957 17 xt_mark,xt_length,xt_MARK,xt_tcpudp,xt_conntrack,xt_state,xt_dscp,xt_DSCP,xt_CLASSIFY,ipt_LOG,ipt_REJECT,xt_owner,iptable_nat,ipt_MASQUERADE,xt_multiport,xt_iprange,ip_tables w83627ehf 20102 0 hwmon_vid 1828 1 w83627ehf loop 11902 0 button 4634 0 parport_pc 18855 1 processor 29489 0 parport27314 3 ppdev,lp,parport_pc evdev 7384 2 snd_intel8x0 24170 0 snd_ac97_codec 99282 1 snd_intel8x0 ac97_bus1086 1 snd_ac97_codec snd_pcm_oss32790 0 snd_mixer_oss 12654 1 snd_pcm_oss psmouse45587 0 tpm_tis 7336 0 tpm 9933 1 tpm_tis tpm_bios4521 1 tpm serio_raw 3960 0 snd_pcm61078 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss shpchp 26264 0 snd_timer 15749 1 snd_pcm pci_hotplug
Bug#580638: marked as done (realtek r8192s_usb new_id)
Your message dated Sun, 06 Jun 2010 21:39:38 + with message-id e1olnzc-00021k...@ries.debian.org and subject line Bug#580740: fixed in linux-2.6 2.6.34-1~experimental.2 has caused the Debian Bug report #580740, regarding realtek r8192s_usb new_id to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580740: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580740 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.33-1~experimental.5 X-debbugs-Cc: Ben Hutchings b...@decadent.org.uk, Stefan Lippers-Hollmann s@gmx.de, 579...@bugs.debian.org File: /lib/modules/2.6.33-2-686/kernel/drivers/staging/rtl8192su/r8192s_usb.ko In contrast with the steps noted at http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579694#47 I find I need to do the odd combination of # modprobe r8192s_usb # echo 0bda 8171 | /sys/bus/usb/drivers/rtl819xU/new_id as there is no other /sys/bus/usb/drivers/r* (not that I know what I'm talking about.) Nothing I put in /etc/udev/rules.d/70-persistent-net.rules helps. Please make it so that it works upon plugging it in. (The firmware is already in firmware-realtek.) Please also add it to /lib/modules/2.6.32 . ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.34-1~experimental.2 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.34-1~experimental.2_all.deb linux-2.6_2.6.34-1~experimental.2.diff.gz to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.diff.gz linux-2.6_2.6.34-1~experimental.2.dsc to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.dsc linux-base_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-base_2.6.34-1~experimental.2_all.deb linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb linux-source-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-source-2.6.34_2.6.34-1~experimental.2_all.deb linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 580...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Ben Hutchings b...@decadent.org.uk (supplier of updated linux-2.6 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Sun, 06 Jun 2010 18:53:04 +0100 Source: linux-2.6 Binary: linux-source-2.6.34 linux-doc-2.6.34 linux-manual-2.6.34 linux-patch-debian-2.6.34 firmware-linux-free linux-support-2.6.34-1 linux-base linux-libc-dev linux-headers-2.6.34-1-all linux-headers-2.6.34-1-all-alpha linux-headers-2.6.34-1-common linux-image-2.6.34-1-alpha-generic linux-headers-2.6.34-1-alpha-generic linux-image-2.6.34-1-alpha-smp linux-headers-2.6.34-1-alpha-smp linux-image-2.6.34-1-alpha-legacy linux-headers-2.6.34-1-alpha-legacy linux-headers-2.6.34-1-all-amd64 linux-image-2.6.34-1-amd64 linux-headers-2.6.34-1-amd64 linux-image-2.6.34-1-amd64-dbg linux-headers-2.6.34-1-all-armel linux-image-2.6.34-1-iop32x linux-headers-2.6.34-1-iop32x linux-image-2.6.34-1-ixp4xx linux-headers-2.6.34-1-ixp4xx linux-image-2.6.34-1-kirkwood linux-headers-2.6.34-1-kirkwood linux-image-2.6.34-1-orion5x linux-headers-2.6.34-1-orion5x linux-image-2.6.34-1-versatile linux-headers-2.6.34-1-versatile linux-headers-2.6.34-1-all-hppa linux-image-2.6.34-1-parisc linux-headers-2.6.34-1-parisc linux-image-2.6.34-1-parisc-smp linux-headers-2.6.34-1-parisc-smp linux-image-2.6.34-1-parisc64 linux-headers-2.6.34-1-parisc64 linux-image-2.6.34-1-parisc64-smp linux-headers-2.6.34-1-parisc64-smp linux-headers-2.6.34-1-all-i386 linux-image-2.6.34-1-486 linux-headers-2.6.34-1-486 linux-image-2.6.34-1-686 linux-headers-2.6.34-1-686
Bug#576723: marked as done (linux-2.6: [2.6.33] mising rt2860sta; rt2800 not suitable for replacement)
Your message dated Sun, 06 Jun 2010 21:39:38 + with message-id e1olnzc-00021k...@ries.debian.org and subject line Bug#580740: fixed in linux-2.6 2.6.34-1~experimental.2 has caused the Debian Bug report #580740, regarding linux-2.6: [2.6.33] mising rt2860sta; rt2800 not suitable for replacement to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 580740: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580740 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.33-1~experimental.2, 2.6.33-1~experimental.4 Severity: normal Tags: experimental user: debian-eeepc-de...@lists.alioth.debian.org usertag: features usertag: 901 Hi, The 2.6.33 linux-image in experimental removed the rt2860sta driver from staging and it seems to offer the rt2800 driver as a replacement. The later doesn't work for me, however. I can't associate with my access point using WPA2. Hardware is Asus EeePC 901 (details in the info below). Would it be possible to restore rt2860sta? -- Package-specific info: ** Version: Linux version 2.6.33-2-686 (Debian 2.6.33-1~experimental.4) (m...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Mar 18 07:30:30 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.33-2-686 root=UUID=4e436c23-73dc-44f1-85be-ffc868c92769 ro quiet i915.modeset=1 acpi_osi=Linux rfkill.default_state=1 ** Not tainted ** Kernel log: [3.497662] usb usb4: Product: UHCI Host Controller [3.497666] usb usb4: Manufacturer: Linux 2.6.33-2-686 uhci_hcd [3.497671] usb usb4: SerialNumber: :00:1d.2 [3.504715] hub 4-0:1.0: USB hub found [3.504729] hub 4-0:1.0: 2 ports detected [3.504849] uhci_hcd :00:1d.3: PCI INT D - GSI 16 (level, low) - IRQ 16 [3.504866] uhci_hcd :00:1d.3: setting latency timer to 64 [3.504873] uhci_hcd :00:1d.3: UHCI Host Controller [3.504893] uhci_hcd :00:1d.3: new USB bus registered, assigned bus number 5 [3.504951] uhci_hcd :00:1d.3: irq 16, io base 0xdc00 [3.505035] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [3.505042] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [3.505047] usb usb5: Product: UHCI Host Controller [3.505052] usb usb5: Manufacturer: Linux 2.6.33-2-686 uhci_hcd [3.505057] usb usb5: SerialNumber: :00:1d.3 [3.509041] hub 5-0:1.0: USB hub found [3.509054] hub 5-0:1.0: 2 ports detected [3.533294] eeepc_laptop: Eee PC Hotkey Driver [3.533313] eeepc_laptop: Hotkey init flags 0x41 [3.672083] usb 1-8: new high speed USB device using ehci_hcd and address 2 [3.820149] [drm] Initialized drm 1.1.0 20060810 [3.949161] i915 :00:02.0: PCI INT A - GSI 16 (level, low) - IRQ 16 [3.949171] i915 :00:02.0: setting latency timer to 64 [3.993935] [drm] set up 7M of stolen space [4.124233] rt2800pci :01:00.0: PCI INT A - GSI 19 (level, low) - IRQ 19 [4.124247] rt2800pci :01:00.0: setting latency timer to 64 [4.226869] phy0: Selected rate control algorithm 'minstrel' [4.228381] Registered led device: rt2800pci-phy0::radio [4.228478] Registered led device: rt2800pci-phy0::assoc [4.228574] Registered led device: rt2800pci-phy0::quality [4.233376] usb 1-8: New USB device found, idVendor=05e3, idProduct=0505 [4.233384] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [4.233390] usb 1-8: Product: USB 2.0 Camera [4.264156] elantech.c: assuming hardware version 2, firmware version 2.48 [4.367916] elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64. [4.372520] [drm] initialized overlay support [4.641088] Linux video capture interface: v2.00 [4.660808] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (05e3:0505) [4.829636] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 219 [4.829705] [drm:edid_is_valid] *ERROR* Raw EDID: [4.829765] 300 ff ff ff ff ff ff 00 06 af 20 10 00 00 00 00 .. . [4.829771] 301 12 01 03 80 13 0b 78 0a fa 56 92 56 54 98 24 ...x..V.VT.$ [4.829777] 31a 4f 54 00 00 00 01 01 01 01 01 01 01 01 01 01 .OT. [4.829783] 301 01 01 01 01 01 b0 13 00 40 41 58 19 20 18 88 .@ax. .. [4.829788] 303 01 c3 71 00 00 00 18 00 00 00 0f 00 00 00 00 ...q [4.829794] 300 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [4.829800] 300 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [4.829805] 300 00 00 00 00 00 00 00 00 00 00 00 df ff ff ff [
Bug#582637: marked as done ([linux-2.6] Please enable CONFIG_VGA_SWITCHEROO)
Your message dated Sun, 06 Jun 2010 21:39:38 + with message-id e1olnzc-00021u...@ries.debian.org and subject line Bug#582637: fixed in linux-2.6 2.6.34-1~experimental.2 has caused the Debian Bug report #582637, regarding [linux-2.6] Please enable CONFIG_VGA_SWITCHEROO to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 582637: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582637 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.34-1 Severity: wishlist --- Please enter the report below this line. --- Please enable CONFIG_VGA_SWITCHEROO kernel config option (available from 2.6.34) to enable support for video card switching on notebooks with both integrated and discrete video card (aka hybrid graphics). --- System information. --- Architecture: amd64 Kernel: Linux 2.6.34-1-amd64 Debian Release: squeeze/sid 500 unstablewww.debian-multimedia.org 500 unstablesidux.wuertz.org 500 unstableftp.debian.org 102 experimentalwww.debian-multimedia.org 102 experimentalftp.debian.org --- Package information. --- Package's Depends field is empty. Package's Recommends field is empty. Package's Suggests field is empty. ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.34-1~experimental.2 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.34-1~experimental.2_all.deb linux-2.6_2.6.34-1~experimental.2.diff.gz to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.diff.gz linux-2.6_2.6.34-1~experimental.2.dsc to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.dsc linux-base_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-base_2.6.34-1~experimental.2_all.deb linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb linux-source-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-source-2.6.34_2.6.34-1~experimental.2_all.deb linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 582...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Ben Hutchings b...@decadent.org.uk (supplier of updated linux-2.6 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Sun, 06 Jun 2010 18:53:04 +0100 Source: linux-2.6 Binary: linux-source-2.6.34 linux-doc-2.6.34 linux-manual-2.6.34 linux-patch-debian-2.6.34 firmware-linux-free linux-support-2.6.34-1 linux-base linux-libc-dev linux-headers-2.6.34-1-all linux-headers-2.6.34-1-all-alpha linux-headers-2.6.34-1-common linux-image-2.6.34-1-alpha-generic linux-headers-2.6.34-1-alpha-generic linux-image-2.6.34-1-alpha-smp linux-headers-2.6.34-1-alpha-smp linux-image-2.6.34-1-alpha-legacy linux-headers-2.6.34-1-alpha-legacy linux-headers-2.6.34-1-all-amd64 linux-image-2.6.34-1-amd64 linux-headers-2.6.34-1-amd64 linux-image-2.6.34-1-amd64-dbg linux-headers-2.6.34-1-all-armel linux-image-2.6.34-1-iop32x linux-headers-2.6.34-1-iop32x linux-image-2.6.34-1-ixp4xx linux-headers-2.6.34-1-ixp4xx linux-image-2.6.34-1-kirkwood linux-headers-2.6.34-1-kirkwood linux-image-2.6.34-1-orion5x linux-headers-2.6.34-1-orion5x linux-image-2.6.34-1-versatile linux-headers-2.6.34-1-versatile linux-headers-2.6.34-1-all-hppa linux-image-2.6.34-1-parisc linux-headers-2.6.34-1-parisc linux-image-2.6.34-1-parisc-smp linux-headers-2.6.34-1-parisc-smp linux-image-2.6.34-1-parisc64 linux-headers-2.6.34-1-parisc64 linux-image-2.6.34-1-parisc64-smp linux-headers-2.6.34-1-parisc64-smp linux-headers-2.6.34-1-all-i386 linux-image-2.6.34-1-486 linux-headers-2.6.34-1-486 linux-image-2.6.34-1-686
Bug#566208: marked as done (linux-image-2.6.26-2-486: e_powersaver causes constant lockups)
Your message dated Sun, 06 Jun 2010 21:39:38 + with message-id e1olnzc-000219...@ries.debian.org and subject line Bug#566208: fixed in linux-2.6 2.6.34-1~experimental.2 has caused the Debian Bug report #566208, regarding linux-image-2.6.26-2-486: e_powersaver causes constant lockups to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 566208: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=566208 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.26-2-486 Version: 2.6.26-19lenny2 Severity: critical Justification: breaks the whole system After upgrading linux-image-2.6.26-2-486 from 17lenny1 to 19lenny2, I started experiencing 100% reproducable system lockups on a VIA C7 system. No errors in the logs, no oops, no BUG, nothing - just a hard lock. No keyboard LED response and no sysrq functionality worked. Sometimes the system wouldn't complete the boot process without freezing. Sometimes it would last three minutes or so before freezing. I could reproduce the lockup with cat /dev/zero file. Every time, within 10 seconds, the system would freeze. After a lot of trial, error, and searching, I discovered that the e_powersaver module was being loaded and the lockups went away if I unloaded it. The kernel build help text indicates that the module shouldn't ever be used, and is highly dangerous: This adds the CPUFreq driver for VIA C7 processors. However, this driver does not have any safeguards to prevent operating the CPU out of spec and is thus considered dangerous. Please use the regular ACPI cpufreq driver, enabled by CONFIG_X86_ACPI_CPUFREQ. I have blacklisted this module and suspect that it should be blacklisted by default. It seems possible that Debian bug #563941 is related to this issue as well, but there's not enough info in the report for me to be sure. Thanks, Ross -- Package-specific info: ** Version: Linux version 2.6.26-2-486 (Debian 2.6.26-19lenny2) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Wed Nov 4 20:19:07 UTC 2009 ** Command line: root=LABEL=root ro ** Not tainted ** Kernel log: [ 13.058778] udevd version 125 started [ 13.061147] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 13.303392] usb 2-1: configuration #1 chosen from 1 choice [ 13.308441] usb 2-1: New USB device found, idVendor=051d, idProduct=0002 [ 13.308522] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 13.308596] usb 2-1: Product: Back-UPS XS 1300 LCD FW:836.H7 .D USB FW:H7 [ 13.308667] usb 2-1: Manufacturer: American Power Conversion [ 13.308736] usb 2-1: SerialNumber: 8B0749R09108 [ 17.063851] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 17.111770] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.171321] Linux agpgart interface v0.103 [ 17.321713] agpgart: Detected VIA P4M900 chipset [ 17.324789] agpgart: AGP aperture is 32M @ 0xfc00 [ 19.291607] Initializing USB Mass Storage driver... [ 19.400611] scsi4 : SCSI emulation for USB Mass Storage devices [ 19.401000] scsi5 : SCSI emulation for USB Mass Storage devices [ 19.401232] usbcore: registered new interface driver usb-storage [ 19.401305] USB Mass Storage support registered. [ 19.461227] usb-storage: device found at 4 [ 19.461238] usb-storage: waiting for device to settle before scanning [ 19.464808] usb-storage: device found at 2 [ 19.464815] usb-storage: waiting for device to settle before scanning [ 19.832163] input: Power Button (FF) as /class/input/input1 [ 19.863234] ACPI: Power Button (FF) [PWRF] [ 19.863598] input: Sleep Button (CM) as /class/input/input2 [ 19.888589] ACPI: Sleep Button (CM) [SLPB] [ 19.60] input: Power Button (CM) as /class/input/input3 [ 19.921730] ACPI: Power Button (CM) [PWRB] [ 22.914126] input: PC Speaker as /class/input/input4 [ 23.138478] Error: Driver 'pcspkr' is already registered, aborting... [ 23.248778] ACPI: PCI Interrupt :80:01.0[A] - GSI 17 (level, low) - IRQ 17 [ 23.248968] PCI: Setting latency timer of device :80:01.0 to 64 [ 24.460310] usb-storage: device scan complete [ 24.461172] scsi 5:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2 [ 24.475496] sd 5:0:0:0: [sde] 1978368 512-byte hardware sectors (1013 MB) [ 24.476243] sd 5:0:0:0: [sde] Write Protect is off [ 24.476321] sd 5:0:0:0: [sde] Mode Sense: 03 00 00 00 [ 24.476330] sd 5:0:0:0: [sde] Assuming drive cache: write through [ 24.479494] sd 5:0:0:0: [sde] 1978368 512-byte hardware
Bug#583532: marked as done (linux-image-2.6.34-1-amd64: Please, enable VGASWITCHEROO support)
Your message dated Sun, 06 Jun 2010 21:39:38 + with message-id e1olnzc-00021u...@ries.debian.org and subject line Bug#582637: fixed in linux-2.6 2.6.34-1~experimental.2 has caused the Debian Bug report #582637, regarding linux-image-2.6.34-1-amd64: Please, enable VGASWITCHEROO support to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 582637: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582637 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.34-1~experimental.1 Severity: wishlist Please, enable support for VGASWITCHEROO. It should not do any bad to people not using it and it is extremely useful for all the double-board laptops out there. Thanks, federico -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.33-2-amd64 (SMP w/2 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.34-1-amd64 depends on: ii debconf [debconf 1.5.32 Debian configuration management sy ii initramfs-tools 0.94.4 tools for generating an initramfs ii linux-base 2.6.34-1~experimental.1 Linux image base package ii module-init-tool 3.12~pre2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.34-1-amd64 recommends: ii firmware-linux-f 2.6.34-1~experimental.1 Binary firmware for various driver Versions of packages linux-image-2.6.34-1-amd64 suggests: pn grub | lilo none (no description available) pn linux-doc-2.6.34 none (no description available) Versions of packages linux-image-2.6.34-1-amd64 is related to: pn firmware-bnx2 none (no description available) pn firmware-bnx2xnone (no description available) pn firmware-ipw2x00 none (no description available) pn firmware-ivtv none (no description available) ii firmware-iwlwifi 0.24 Binary firmware for Intel Wireless ii firmware-linux0.24 Binary firmware for various driver ii firmware-linux-nonfree0.24 Binary firmware for various driver pn firmware-qlogic none (no description available) pn firmware-ralink none (no description available) pn xen-hypervisornone (no description available) -- debconf information excluded ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.34-1~experimental.2 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.34-1~experimental.2_all.deb linux-2.6_2.6.34-1~experimental.2.diff.gz to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.diff.gz linux-2.6_2.6.34-1~experimental.2.dsc to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.dsc linux-base_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-base_2.6.34-1~experimental.2_all.deb linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb linux-source-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-source-2.6.34_2.6.34-1~experimental.2_all.deb linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 582...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Ben Hutchings b...@decadent.org.uk (supplier of updated linux-2.6 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Sun, 06 Jun 2010
Bug#582810: marked as done (install vmlinux into /usr/lib/debug/boot/)
Your message dated Sun, 06 Jun 2010 21:39:38 +
with message-id e1olnzc-00021d...@ries.debian.org
and subject line Bug#582810: fixed in linux-2.6 2.6.34-1~experimental.2
has caused the Debian Bug report #582810,
regarding install vmlinux into /usr/lib/debug/boot/
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
582810: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582810
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
---BeginMessage---
Package: linux-2.6
Severity: normal
Hi,
The systemtap tool, when executed, searches for the vmlinux image in /boot/.
The currently shipped vmlinux image in Debian is with the -dbg package that
installs it into /usr/lib/debug.
Could you please handle a symlink to /boot for vmlinux ?
This is required for systemtap. I have manually verified it by creating
the symlink and it works.
Without it, following error is seen:
00:52:38 r...@champaran:/usr/share/doc/systemtap-doc/examples/process $
stap -v -e 'probe vfs.read {printf(read performed\n); exit()}'
Pass 1: parsed user script and 68 library script(s) using
49924virt/20852res/1740shr kb, in 130usr/10sys/135real ms.
semantic error: missing x86_64 kernel/module debuginfo under
'/lib/modules/2.6.34-1-amd64/build' while resolving probe point
kernel.function(vfs_read)
semantic error: no match while resolving probe point vfs.read
Pass 2: analyzed script: 0 probe(s), 0 function(s), 0 embed(s), 0
global(s) using 50532virt/21772res/2008shr kb, in 10usr/370sys/1771real
ms.
Pass 2: analysis failed. Try again with another '--vp 01' option.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (101, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.34-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
-- no debconf information
--
Ritesh Raj Sarraf | http://people.debian.org/~rrs
Necessity is the mother of invention.
signature.asc
Description: This is a digitally signed message part.
---End Message---
---BeginMessage---
Source: linux-2.6
Source-Version: 2.6.34-1~experimental.2
We believe that the bug you reported is fixed in the latest version of
linux-2.6, which is due to be installed in the Debian FTP archive:
firmware-linux-free_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/firmware-linux-free_2.6.34-1~experimental.2_all.deb
linux-2.6_2.6.34-1~experimental.2.diff.gz
to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.diff.gz
linux-2.6_2.6.34-1~experimental.2.dsc
to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.dsc
linux-base_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-base_2.6.34-1~experimental.2_all.deb
linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb
linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb
linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb
linux-source-2.6.34_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-source-2.6.34_2.6.34-1~experimental.2_all.deb
linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb
to main/l/linux-2.6/linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 582...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Ben Hutchings b...@decadent.org.uk (supplier of updated linux-2.6 package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@debian.org)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Format: 1.8
Date: Sun, 06 Jun 2010 18:53:04 +0100
Source: linux-2.6
Binary: linux-source-2.6.34 linux-doc-2.6.34 linux-manual-2.6.34
linux-patch-debian-2.6.34 firmware-linux-free linux-support-2.6.34-1 linux-base
Bug#582224: marked as done (linux-2.6: [ia64] Please enable CONFIG_MSPEC)
Your message dated Sun, 06 Jun 2010 21:39:38 + with message-id e1olnzc-00021o...@ries.debian.org and subject line Bug#582224: fixed in linux-2.6 2.6.34-1~experimental.2 has caused the Debian Bug report #582224, regarding linux-2.6: [ia64] Please enable CONFIG_MSPEC to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 582224: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582224 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Severity: wishlist We have some software running on our Altix 3700 that uses operations provided by the mspec kernel module. Please enable CONFIG_MSPEC in the Debian kernel configuration. -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (500, 'stable') Architecture: ia64 Kernel: Linux 2.6.32-bpo.4-mckinley (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.34-1~experimental.2 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: firmware-linux-free_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/firmware-linux-free_2.6.34-1~experimental.2_all.deb linux-2.6_2.6.34-1~experimental.2.diff.gz to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.diff.gz linux-2.6_2.6.34-1~experimental.2.dsc to main/l/linux-2.6/linux-2.6_2.6.34-1~experimental.2.dsc linux-base_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-base_2.6.34-1~experimental.2_all.deb linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-doc-2.6.34_2.6.34-1~experimental.2_all.deb linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-manual-2.6.34_2.6.34-1~experimental.2_all.deb linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-patch-debian-2.6.34_2.6.34-1~experimental.2_all.deb linux-source-2.6.34_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-source-2.6.34_2.6.34-1~experimental.2_all.deb linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb to main/l/linux-2.6/linux-support-2.6.34-1_2.6.34-1~experimental.2_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 582...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Ben Hutchings b...@decadent.org.uk (supplier of updated linux-2.6 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Sun, 06 Jun 2010 18:53:04 +0100 Source: linux-2.6 Binary: linux-source-2.6.34 linux-doc-2.6.34 linux-manual-2.6.34 linux-patch-debian-2.6.34 firmware-linux-free linux-support-2.6.34-1 linux-base linux-libc-dev linux-headers-2.6.34-1-all linux-headers-2.6.34-1-all-alpha linux-headers-2.6.34-1-common linux-image-2.6.34-1-alpha-generic linux-headers-2.6.34-1-alpha-generic linux-image-2.6.34-1-alpha-smp linux-headers-2.6.34-1-alpha-smp linux-image-2.6.34-1-alpha-legacy linux-headers-2.6.34-1-alpha-legacy linux-headers-2.6.34-1-all-amd64 linux-image-2.6.34-1-amd64 linux-headers-2.6.34-1-amd64 linux-image-2.6.34-1-amd64-dbg linux-headers-2.6.34-1-all-armel linux-image-2.6.34-1-iop32x linux-headers-2.6.34-1-iop32x linux-image-2.6.34-1-ixp4xx linux-headers-2.6.34-1-ixp4xx linux-image-2.6.34-1-kirkwood linux-headers-2.6.34-1-kirkwood linux-image-2.6.34-1-orion5x linux-headers-2.6.34-1-orion5x linux-image-2.6.34-1-versatile linux-headers-2.6.34-1-versatile linux-headers-2.6.34-1-all-hppa linux-image-2.6.34-1-parisc linux-headers-2.6.34-1-parisc linux-image-2.6.34-1-parisc-smp linux-headers-2.6.34-1-parisc-smp linux-image-2.6.34-1-parisc64 linux-headers-2.6.34-1-parisc64 linux-image-2.6.34-1-parisc64-smp linux-headers-2.6.34-1-parisc64-smp linux-headers-2.6.34-1-all-i386 linux-image-2.6.34-1-486 linux-headers-2.6.34-1-486 linux-image-2.6.34-1-686 linux-headers-2.6.34-1-686 linux-image-2.6.34-1-686-bigmem linux-headers-2.6.34-1-686-bigmem linux-image-2.6.34-1-686-bigmem-dbg linux-headers-2.6.34-1-all-ia64 linux-image-2.6.34-1-itanium linux-headers-2.6.34-1-itanium linux-image-2.6.34-1-mckinley linux-headers-2.6.34-1-mckinley
Bug#584830: linux-image-2.6.32-5-amd64: USB 3.0 / xhci prevents suspend
Package: linux-2.6 Version: 2.6.32-15 Severity: normal My motherboard includes a USB 3.0 controller, handled by the xhci module. When the xhci module is loaded, the system fails to suspend with the following log messages: [ 458.601622] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2 [ 458.601624] PM: Device usb2 failed to suspend: error -2 When I unload the xhci module, the system suspends just fine, without this message. Relevant `lsusb -v` and dmesg output parts follow: # lsusb -v [ ... ] Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice2.06 iManufacturer 3 Linux 2.6.32-5-amd64 xhci_hcd iProduct2 xHCI Host Controller iSerial 1 :04:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable0x00 PortPwrCtrlMask0xff Hub Port Status: Port 1: .0100 power Port 2: .0100 power Port 3: .0100 power Port 4: .0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled # pm-suspend # dmesg [ ... ] [ 457.630373] PM: Syncing filesystems ... done. [ 457.744997] PM: Preparing system for mem sleep [ 457.747218] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 457.747607] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 457.747642] PM: Entering mem sleep [ 457.747653] Suspending console(s) (use no_console_suspend to debug) [ 457.812103] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [ 457.812321] sd 3:0:0:0: [sdb] Stopping disk [ 458.225455] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 458.240627] sd 2:0:0:0: [sda] Stopping disk [ 458.601622] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2 [ 458.601624] PM: Device usb2 failed to suspend: error -2 [ 458.601626] PM: Some devices failed to suspend [ 458.822063] sd 2:0:0:0: [sda] Starting disk [ 460.874188] sd 3:0:0:0: [sdb] Starting disk [ 465.811159] PM: Finishing wakeup. [ 465.811160] Restarting tasks ... done. # modprobe -r xhci # pm-suspend -- Suspend then works without a problem. dmesg output is, as one would expect, full of what looks to me like routine device suspend, later resume, log messages. The USB 3.0 controller doesn't appear in the USB device list reportbug added below since the module has been unloaded. It appears in the PCI device list, though, in case that helps. -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=d6aacc5e-b385-440f-a972-523ec3e3945d ro quiet ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: [ removed, irrelevant. See above for relevant log parts. ] ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: GA-770TA-UD3 product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F2 board_vendor: Gigabyte Technology Co., Ltd. board_name: GA-770TA-UD3 board_version: x.x ** Loaded modules: Module Size Used by sco 7209 2 ppdev 5030 0 lp 7462 0 bridge 39598 0 stp 1440 1 bridge
Bug#584830: linux-image-2.6.32-5-amd64: USB 3.0 / xhci prevents suspend
On Mon, 2010-06-07 at 00:33 +0200, Thomas Jollans wrote: Package: linux-2.6 Version: 2.6.32-15 Severity: normal My motherboard includes a USB 3.0 controller, handled by the xhci module. When the xhci module is loaded, the system fails to suspend with the following log messages: [ 458.601622] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2 [ 458.601624] PM: Device usb2 failed to suspend: error -2 When I unload the xhci module, the system suspends just fine, without this message. Sarah, any idea what's going on here? Debian version 2.6.32-15 is closely based on stable version 2.6.32.14. I didn't see any later changes to xhci that look related to PM. Ben. Relevant `lsusb -v` and dmesg output parts follow: # lsusb -v [ ... ] Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice2.06 iManufacturer 3 Linux 2.6.32-5-amd64 xhci_hcd iProduct2 xHCI Host Controller iSerial 1 :04:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable0x00 PortPwrCtrlMask0xff Hub Port Status: Port 1: .0100 power Port 2: .0100 power Port 3: .0100 power Port 4: .0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled # pm-suspend # dmesg [ ... ] [ 457.630373] PM: Syncing filesystems ... done. [ 457.744997] PM: Preparing system for mem sleep [ 457.747218] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 457.747607] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 457.747642] PM: Entering mem sleep [ 457.747653] Suspending console(s) (use no_console_suspend to debug) [ 457.812103] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [ 457.812321] sd 3:0:0:0: [sdb] Stopping disk [ 458.225455] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 458.240627] sd 2:0:0:0: [sda] Stopping disk [ 458.601622] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2 [ 458.601624] PM: Device usb2 failed to suspend: error -2 [ 458.601626] PM: Some devices failed to suspend [ 458.822063] sd 2:0:0:0: [sda] Starting disk [ 460.874188] sd 3:0:0:0: [sdb] Starting disk [ 465.811159] PM: Finishing wakeup. [ 465.811160] Restarting tasks ... done. # modprobe -r xhci # pm-suspend -- Suspend then works without a problem. dmesg output is, as one would expect, full of what looks to me like routine device suspend, later resume, log messages. The USB 3.0 controller doesn't appear in the USB device list reportbug added below since the module has been unloaded. It appears in the PCI device list, though, in case that helps. -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=d6aacc5e-b385-440f-a972-523ec3e3945d ro quiet ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: [ removed, irrelevant. See above for relevant log parts. ] ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: GA-770TA-UD3 product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version:
Processed: tagging 584830, bug 584830 is forwarded to linux-...@vger.kernel.org
Processing commands for cont...@bugs.debian.org: tags 584830 upstream Bug #584830 [linux-2.6] linux-image-2.6.32-5-amd64: USB 3.0 / xhci prevents suspend Added tag(s) upstream. forwarded 584830 linux-...@vger.kernel.org Bug #584830 [linux-2.6] linux-image-2.6.32-5-amd64: USB 3.0 / xhci prevents suspend Set Bug forwarded-to-address to 'linux-...@vger.kernel.org'. thanks Stopping processing here. Please contact me if you need assistance. -- 584830: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=584830 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.127587353426676.transcr...@bugs.debian.org
Bug#584784: also applies to unstable
On Sun, 2010-06-06 at 23:18 +0200, Willi Mann wrote: Kernel panic - not syncing: To avoid data corruption io_map_base MUST be set with multiple PCI domains. has been applied on all PCI MIPS systems since Linux 2.6.24. Are you quite sure that this was introduced by the kernel upgrade and not a qemu upgrade. Yes, I didn't change the qemu version, it's really only the kernel that changed. Attached is the dmesg output of the working kernel, version 2.6.32-9. OK, it looks like this is due to an botched switch from IDE to libata drivers on MIPS. The qemu emulated HD controller is now being handled by the ide-generic driver whereas it should have been switched from piix to ata_piix, and ide-generic triggers this panic for reasons I don't fully understand. This will get fixed, but not immediately. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse. signature.asc Description: This is a digitally signed message part
Bug#584840: linux-2.6: FTBFS on powerpc: ipr uses undefined function writeq()
Package: linux-2.6 Version: 2.6.34-1~experimental.2 SCSI_IPR depends only on PCI SCSI ATA, but ipr.c now uses writeq() which is not defined for all architectures. This is a regression from Linux 2.6.33. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse. signature.asc Description: This is a digitally signed message part
Processed: tagging 584840, bug 584840 is forwarded to linux-s...@vger.kernel.org
Processing commands for cont...@bugs.debian.org: tags 584840 upstream Bug #584840 [linux-2.6] linux-2.6: FTBFS on powerpc: ipr uses undefined function writeq() Added tag(s) upstream. forwarded 584840 linux-s...@vger.kernel.org Bug #584840 [linux-2.6] linux-2.6: FTBFS on powerpc: ipr uses undefined function writeq() Set Bug forwarded-to-address to 'linux-s...@vger.kernel.org'. thanks Stopping processing here. Please contact me if you need assistance. -- 584840: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=584840 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12758762554617.transcr...@bugs.debian.org
Bug#584846: linux-2.6: Detects only 64MB and fails to boot on Intel Green City board if e820 hooked by GRUB2
Package: linux-2.6 Severity: normal In the course of other testing, I need to boot systems using GRUB2 from a USB drive. To support systems that can't find their boot drive if the drive numbering changes, I use GRUB2's drivemap command like this: set root=(hd1) drivemap (hd0) (hd1) chainloader +1 boot This results in GRUB2 hooking the e820 interrupt to reserve memory for its hook of the BIOS disk interrupt. However, note that this problem *also* occurs if GRUB2 hooks e820 and does not run drivemap (part of the testing involves allocating persistent memory for other purposes). This works fine with most OSes. It works with the Linux 2.6.26 kernel shipped in Lenny (specifically, linux-image-2.6.26-2-amd64 version 2.6.26-22lenny1). However, if I try it with 2.6.32, as shipped in unstable or backports, it fails to boot. From what I can see of the boot messages, and from the rare occasions when it manages to give me a shell in the initramfs with a working keyboard, it looks like Linux only detects 64MB of memory, goes nuts with the OOM killer on processes essential to booting (udev, for instance), and usually ends by panicing because it can't find something to kill. (Not surprising when booting a 16-way or 24-way SMP system with only 64MB of RAM.) I've manually verified the e820 map provided by the GRUB2-hooked interrupt (after booting a kernel that *does* boot), and it looks perfectly correct; thus, I don't think the problem lies in GRUB2, but in the kernel. Given the nature of the problem, it proves fairly difficult to extract the boot messages, but I can try to gather more information if you have a suggestion for what to look for. I may be able to bisect this in the future. - Josh Triplett -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-bpo.3-amd64 (SMP w/16 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100607031431.3006.88542.report...@scratch
