Bug#815126: linux-image-4.4.0-1-amd64 hangs after 'Loading initial ramdisk ...'
Have same problem with desktop based on Gigabyte GA-970A-UD3. ThinkPad Edge E330 3354-AY5 have everything OK. signature.asc Description: This is a digitally signed message part.
Bug#815125: linux-image-4.4.0-1-amd64 fails to load initrd - no booting
On Fri, 19 Feb 2016 16:24:06 +0900 Norbert Preining wrote: > Package: src:linux > Version: 4.4.2-1 > Severity: critical > Justification: breaks the whole system > > Dear all, > > till now I was running > linux-image-4.4.0-trunk-amd64 (from experimental) > without any problem. Today I installed > linux-image-4.4.0-1-amd64 (version 4.4.2-1) > and tried to boot into it. Booting stopped at > Loading initrd > and remains there. > I'm experiencing this issue too, on a 2015 Lenovo ThinkPad X250, using UEFI boot. I've tried to boot a vanilla 4.4.2 kernel with custom configuration, which boots fine. I'm rebuilding a vanilla 4.4.2 kernel with the Debian configuration to check wether it boots fine or not. It might be related to the UEFI patches added on top of the 4.4.2 kernel, not sure when they appeared. Regards, -- Yves-Alexis signature.asc Description: This is a digitally signed message part
Bug#815126: linux-image-4.4.0-1-amd64 hangs after 'Loading initial ramdisk ...'
On Fri, Feb 19, 2016 at 10:50:34AM +0100, Vincent Bernat wrote: > ❦ 19 février 2016 07:34 GMT, Jim Barber > : > > > I upgraded from linux-image-4.3.0-1-amd64 (version 4.3.5-1) to > > linux-image-4.4.0-1-amd64. > > On rebooting the system I am presented with grub, and then start booting > > into Linux. > > I only get to see 2 lines with the cursor below them on the lefthand side. > > > > Loading Linux 4.4.0-1 ... > > Loading initial ramdisk ... > > _ > > > > The system freezes at this point and is unresponsive. > > I have to hold my power button down for approx 10s to power off the laptop. > > Booting back into linux-4.3.0-1-amd64 works fine. > > I am in the same situation. I am also on the same system (Thinkpad X1 > Carbon, but 2nd). I observe exactly the same behavior on my Toshiba Kira 10D. Best regards, Martin
linux_4.4.2-2_multi.changes ACCEPTED into unstable, unstable
Accepted: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Fri, 19 Feb 2016 14:48:52 + Source: linux Binary: linux-source-4.4 linux-support-4.4.0-1 linux-doc-4.4 linux-manual-4.4 linux-libc-dev linux-headers-4.4.0-1-all linux-headers-4.4.0-1-all-alpha kernel-image-4.4.0-1-alpha-generic-di nic-modules-4.4.0-1-alpha-generic-di nic-wireless-modules-4.4.0-1-alpha-generic-di nic-shared-modules-4.4.0-1-alpha-generic-di serial-modules-4.4.0-1-alpha-generic-di usb-serial-modules-4.4.0-1-alpha-generic-di ppp-modules-4.4.0-1-alpha-generic-di pata-modules-4.4.0-1-alpha-generic-di cdrom-core-modules-4.4.0-1-alpha-generic-di scsi-core-modules-4.4.0-1-alpha-generic-di scsi-modules-4.4.0-1-alpha-generic-di loop-modules-4.4.0-1-alpha-generic-di btrfs-modules-4.4.0-1-alpha-generic-di ext4-modules-4.4.0-1-alpha-generic-di isofs-modules-4.4.0-1-alpha-generic-di jfs-modules-4.4.0-1-alpha-generic-di xfs-modules-4.4.0-1-alpha-generic-di fat-modules-4.4.0-1-alpha-generic-di md-modules-4.4.0-1-alpha-generic-di multipath-modules-4.4.0-1-alpha-generic-di usb-modules-4.4.0-1-alpha-generic-di usb-storage-modules-4.4.0-1-alpha-generic-di fb-modules-4.4.0-1-alpha-generic-di input-modules-4.4.0-1-alpha-generic-di event-modules-4.4.0-1-alpha-generic-di mouse-modules-4.4.0-1-alpha-generic-di nic-pcmcia-modules-4.4.0-1-alpha-generic-di pcmcia-modules-4.4.0-1-alpha-generic-di nic-usb-modules-4.4.0-1-alpha-generic-di sata-modules-4.4.0-1-alpha-generic-di core-modules-4.4.0-1-alpha-generic-di crc-modules-4.4.0-1-alpha-generic-di crypto-modules-4.4.0-1-alpha-generic-di crypto-dm-modules-4.4.0-1-alpha-generic-di ata-modules-4.4.0-1-alpha-generic-di nbd-modules-4.4.0-1-alpha-generic-di squashfs-modules-4.4.0-1-alpha-generic-di virtio-modules-4.4.0-1-alpha-generic-di zlib-modules-4.4.0-1-alpha-generic-di fuse-modules-4.4.0-1-alpha-generic-di srm-modules-4.4.0-1-alpha-generic-di linux-headers-4.4.0-1-common linux-image-4.4.0-1-alpha-generic linux-headers-4.4.0-1-alpha-generic linux-image-4.4.0-1-alpha-smp linux-headers-4.4.0-1-alpha-smp linux-headers-4.4.0-1-all-amd64 kernel-image-4.4.0-1-amd64-di nic-modules-4.4.0-1-amd64-di nic-wireless-modules-4.4.0-1-amd64-di nic-shared-modules-4.4.0-1-amd64-di serial-modules-4.4.0-1-amd64-di usb-serial-modules-4.4.0-1-amd64-di ppp-modules-4.4.0-1-amd64-di pata-modules-4.4.0-1-amd64-di cdrom-core-modules-4.4.0-1-amd64-di firewire-core-modules-4.4.0-1-amd64-di scsi-core-modules-4.4.0-1-amd64-di scsi-modules-4.4.0-1-amd64-di loop-modules-4.4.0-1-amd64-di btrfs-modules-4.4.0-1-amd64-di ext4-modules-4.4.0-1-amd64-di isofs-modules-4.4.0-1-amd64-di jfs-modules-4.4.0-1-amd64-di ntfs-modules-4.4.0-1-amd64-di xfs-modules-4.4.0-1-amd64-di fat-modules-4.4.0-1-amd64-di md-modules-4.4.0-1-amd64-di multipath-modules-4.4.0-1-amd64-di usb-modules-4.4.0-1-amd64-di usb-storage-modules-4.4.0-1-amd64-di pcmcia-storage-modules-4.4.0-1-amd64-di fb-modules-4.4.0-1-amd64-di input-modules-4.4.0-1-amd64-di event-modules-4.4.0-1-amd64-di mouse-modules-4.4.0-1-amd64-di nic-pcmcia-modules-4.4.0-1-amd64-di pcmcia-modules-4.4.0-1-amd64-di nic-usb-modules-4.4.0-1-amd64-di sata-modules-4.4.0-1-amd64-di core-modules-4.4.0-1-amd64-di acpi-modules-4.4.0-1-amd64-di i2c-modules-4.4.0-1-amd64-di crc-modules-4.4.0-1-amd64-di crypto-modules-4.4.0-1-amd64-di crypto-dm-modules-4.4.0-1-amd64-di efi-modules-4.4.0-1-amd64-di ata-modules-4.4.0-1-amd64-di mmc-core-modules-4.4.0-1-amd64-di mmc-modules-4.4.0-1-amd64-di nbd-modules-4.4.0-1-amd64-di squashfs-modules-4.4.0-1-amd64-di speakup-modules-4.4.0-1-amd64-di virtio-modules-4.4.0-1-amd64-di uinput-modules-4.4.0-1-amd64-di sound-modules-4.4.0-1-amd64-di hyperv-modules-4.4.0-1-amd64-di udf-modules-4.4.0-1-amd64-di fuse-modules-4.4.0-1-amd64-di linux-image-4.4.0-1-amd64 linux-headers-4.4.0-1-amd64 linux-image-4.4.0-1-amd64-dbg xen-linux-system-4.4.0-1-amd64 linux-headers-4.4.0-1-common-rt linux-image-4.4.0-1-rt-amd64 linux-headers-4.4.0-1-rt-amd64 linux-image-4.4.0-1-rt-amd64-dbg linux-headers-4.4.0-1-all-arm64 kernel-image-4.4.0-1-arm64-di nic-modules-4.4.0-1-arm64-di nic-wireless-modules-4.4.0-1-arm64-di nic-shared-modules-4.4.0-1-arm64-di ppp-modules-4.4.0-1-arm64-di cdrom-core-modules-4.4.0-1-arm64-di scsi-core-modules-4.4.0-1-arm64-di scsi-modules-4.4.0-1-arm64-di loop-modules-4.4.0-1-arm64-di btrfs-modules-4.4.0-1-arm64-di ext4-modules-4.4.0-1-arm64-di isofs-modules-4.4.0-1-arm64-di jfs-modules-4.4.0-1-arm64-di xfs-modules-4.4.0-1-arm64-di fat-modules-4.4.0-1-arm64-di md-modules-4.4.0-1-arm64-di multipath-modules-4.4.0-1-arm64-di usb-modules-4.4.0-1-arm64-di usb-storage-modules-4.4.0-1-arm64-di input-modules-4.4.0-1-arm64-di event-modules-4.4.0-1-arm64-di nic-usb-modules-4.4.0-1-arm64-di sata-modules-4.4.0-1-arm64-di core-modules-4.4.0-1-arm64-di i2c-modules-4.4.0-1-arm64-di crc-modules-4.4.0-1-arm64-di crypto-modules-4.4.0-1-arm64-di crypto-dm-modules-4.4.0-1-arm64-di efi-modules-4.4.0-1-arm64-di ata-m
Bug#814681: marked as done (QNAP TS-219P II: Network transmit data corruption caused by mv643xx_eth TCP segmentation offload)
Your message dated Fri, 19 Feb 2016 18:00:26 + with message-id and subject line Bug#814681: fixed in linux 4.4.2-2 has caused the Debian Bug report #814681, regarding QNAP TS-219P II: Network transmit data corruption caused by mv643xx_eth TCP segmentation offload to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 814681: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=814681 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: linux-image-4.3.0-0.bpo.1-kirkwood Version: 4.3.3-7~bpo8+1 This one seems to be a repeat offender (see #764162): When running a samba server under Debian with the "sendfile = yes" option, I observe corruption during file transfers from the Debian server to a Windows 7 PC. Inspection of the corruption reveals that every now and then, a sequence of 4 bytes is replaced with the destination MAC address. Sample (Offset: Original Mismatch; M1 through M4 are the first four bytes of the MAC address of my Windows 7 PC): 0C402D48: 2F M1 0C402D49: C2 M2 0C402D4A: 18 M3 0C402D4B: 3C M4 107ABBDC: 9D M1 107ABBDD: A6 M2 107ABBDE: 97 M3 107ABBDF: 5B M4 1102D860: 7B M1 1102D861: DF M2 1102D862: 5A M3 1102D863: CE M4 17682D48: DA M1 17682D49: 9A M2 17682D4A: 44 M3 17682D4B: 7C M4 1B8AE3C8: 33 M1 1B8AE3C9: FF M2 1B8AE3CA: D2 M3 1B8AE3CB: 17 M4 1CAAD860: 18 M1 1CAAD861: 20 M2 1CAAD862: C7 M3 1CAAD863: 23 M4 1F76CCF8: 76 M1 1F76CCF9: 9E M2 1F76CCFA: 44 M3 1F76CCFB: 79 M4 20EEE3C8: AB M1 20EEE3C9: 40 M2 20EEE3CA: A4 M3 20EEE3CB: A2 M4 The offsets change each time the file is transferred, but the incorrect values remain the same, it's always the first 4 bytes of my Windows 7 PC MAC address. The command suggested in #764162: sudo ethtool -K eth0 tso off *fixes* the problem, and the command: sudo ethtool -K eth0 tso on makes it reappear most of the time, but sometimes not...?!? Driver information: ~$ sudo ethtool -i eth0 driver: mv643xx_eth version: 1.4 firmware-version: N/A bus-info: platform supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no Initial offload settings (with the problem observed): Features for eth0: rx-checksumming: on tx-checksumming: on tx-checksum-ipv4: on scatter-gather: on tx-scatter-gather: on tcp-segmentation-offload: on tx-tcp-segmentation: on generic-segmentation-offload: on generic-receive-offload: on tx-nocache-copy: off Best Regards, Robert Schlabbach --- End Message --- --- Begin Message --- Source: linux Source-Version: 4.4.2-2 We believe that the bug you reported is fixed in the latest version of linux, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 814...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Ben Hutchings (supplier of updated linux package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@ftp-master.debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Fri, 19 Feb 2016 14:48:52 + Source: linux Binary: linux-source-4.4 linux-support-4.4.0-1 linux-doc-4.4 linux-manual-4.4 linux-libc-dev linux-headers-4.4.0-1-all linux-headers-4.4.0-1-all-alpha kernel-image-4.4.0-1-alpha-generic-di nic-modules-4.4.0-1-alpha-generic-di nic-wireless-modules-4.4.0-1-alpha-generic-di nic-shared-modules-4.4.0-1-alpha-generic-di serial-modules-4.4.0-1-alpha-generic-di usb-serial-modules-4.4.0-1-alpha-generic-di ppp-modules-4.4.0-1-alpha-generic-di pata-modules-4.4.0-1-alpha-generic-di cdrom-core-modules-4.4.0-1-alpha-generic-di scsi-core-modules-4.4.0-1-alpha-generic-di scsi-modules-4.4.0-1-alpha-generic-di loop-modules-4.4.0-1-alpha-generic-di btrfs-modules-4.4.0-1-alpha-generic-di ext4-modules-4.4.0-1-alpha-generic-di isofs-modules-4.4.0-1-alpha-generic-di jfs-modules-4.4.0-1-alpha-generic-di xfs-modules-4.4.0-1-alpha-generic-di fat-modules-4.4.0-1-alpha-generic-di md-modules-4.4.0-1-alpha-generic-di multipath-modules-4.4.0-1-alpha-generic-di usb-modules-4.4.0-1-alpha-generic-di usb-storage-modules-4.4.0-1-alpha-generic-di fb-modules-4.4.0-1-alpha-generic-di input-modules-4.4.0-1-alpha-generic-di event-modules-4.4.0-1-alpha-generic-di mouse-modules-4.4.0-1-alpha-generic-di nic-pcmcia-modules-4.4.0-1-alpha-ge
linux-tools_4.4-2_source.changes ACCEPTED into unstable
Accepted: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Fri, 19 Feb 2016 17:11:29 + Source: linux-tools Binary: linux-kbuild-4.4 linux-perf-4.4 libusbip-dev usbip hyperv-daemons lockdep liblockdep4.4 liblockdep-dev Architecture: source Version: 4.4-2 Distribution: unstable Urgency: medium Maintainer: Debian Kernel Team Changed-By: Ben Hutchings Description: hyperv-daemons - Support daemons for Linux running on Hyper-V liblockdep-dev - Runtime locking correctness validator (development files) liblockdep4.4 - Runtime locking correctness validator (shared library) libusbip-dev - USB device sharing system over IP network (development files) linux-kbuild-4.4 - Kbuild infrastructure for Linux 4.4 linux-perf-4.4 - Performance analysis tools for Linux 4.4 lockdep- Runtime locking correctness validator usbip - USB device sharing system over IP network Closes: 813080 Changes: linux-tools (4.4-2) unstable; urgency=medium . * linux-perf: Include version number in strace groups installation directory (Closes: #813080) * [alpha,sh4] Attempt to fix build failures * Build fixdep under debian/build and clean it up properly Checksums-Sha1: 6bc13491f451cb6d79e55c6a122f2bd8d11149bb 2951 linux-tools_4.4-2.dsc d7e8d5f0220320cf2990cb65952157f7fb352c8f 33800 linux-tools_4.4-2.debian.tar.xz Checksums-Sha256: 244d96f71f91dbd0f3bd0edb71ad542b65acfa8f8dcde22928a9af7a115697b4 2951 linux-tools_4.4-2.dsc eeccec7a64cc9c14cc6804528beebb60f6e072c3b0cfbcf740a5794438123ae6 33800 linux-tools_4.4-2.debian.tar.xz Files: c94d2ab7f53884cc8347cd2b6f302cca 2951 kernel optional linux-tools_4.4-2.dsc bc541c4ad377334123bfe3f28e553a5d 33800 kernel optional linux-tools_4.4-2.debian.tar.xz -BEGIN PGP SIGNATURE- Version: GnuPG v1 iQIVAwUBVsdNHOe/yOyVhhEJAQoeGQ/+I3XEDOtL2kNGIRZL5jzKbwerlFTh25na oXfU1d+8JSvkNdGgbOx8U5ctvcCMBm3xwBZheACPbiT3iJ7shu8YaQL+Vn9RWkPr IUd4vf5dT0sLkGSG8g7qYZGiBGiO2SJnf8rEfyzLnvP+SZCNn+MwYph9+a/eIsdl dSDYbwrUhftUWqMbf7PsgxfeYA0BMN7XtvBRzX/HqcfgTNx3VXXeGISohlbcITNN hREOmkeYnJU7hZujvwEGLSh4BpK8Kn2ZMVirG+gDO34P5DgVGjlinAFy8uvjnsPZ v+xXoWa4Xlg8mZ+LYYUOOBJdy9/kP3lk+Mp3iGElaPWfnSw60hK/fphDRxx/EIjz f8QCsz5SZcxaKDa6RWf2AcQs0DQd4zquwjgVHb53KK+b/JPrn5AX1IAXAJXoXl9N 5/jeiUgPY3Jg2xsU5Pm+mkr2p5h6t2DBbeod0+6AlYZqYpVrAQYgF7xU6Kf2P6tJ X1dDOWDyleNmq6SafAvRHwE3PifF9GC1tpJcpw8SfJxOLMc7rIejY2vSY1NUUR5k SgSeh5vI5Q+e4zQVUEhlRys0cBUyd0TpM4xTRSAlczNqviOPKpmAaQMcjpa6R4P7 zZZvY8zRR7ep9lvorirm0ITghp59vu0Yab1ZB77Kh/zbCBHiJaJH4pK89BseXNPR rNK3RNQW2mg= =yg2U -END PGP SIGNATURE- Thank you for your contribution to Debian.
Processing of linux-tools_4.4-2_source.changes
linux-tools_4.4-2_source.changes uploaded successfully to localhost along with the files: linux-tools_4.4-2.dsc linux-tools_4.4-2.debian.tar.xz Greetings, Your Debian queue daemon (running on host franck.debian.org)
Bug#815173: kernel-image-4.4.0-1-amd64 does not boot on my Thinkpad X240
Package: linux-image-4.4.0-1-amd64 Version: 4.4.2-1 Severity: serious Hello, This kernel does not boot on my Thinkpad X240. grub loads the kernel and the initrd. Then die computer hangs. There is no additional output. I must switch the computer with the powerbutton. linux-image-4.4.0-trunk-amd64 works fine. Regards -- Wolfgang Walter Studentenwerk München Anstalt des öffentlichen Rechts
Bug#815102: marked as done (linux-perf-4.4 conflicts with linux-perf-4.3)
Your message dated Fri, 19 Feb 2016 17:21:14 + with message-id and subject line Bug#813080: fixed in linux-tools 4.4-2 has caused the Debian Bug report #813080, regarding linux-perf-4.4 conflicts with linux-perf-4.3 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 813080: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=813080 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: linux-perf-4.4 Version: 4.4-1 Severity: grave Justification: renders package unusable Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? apt-get dist-upgrade * What exactly did you do (or not do) that was effective (or ineffective)? tried a dist-upgrade and while unpacking linux-perf-4.4, dpkg complains that it can't overwrite /usr/share/perf-core/strace/groups/file which is also present on linux-perf-4.3 * What was the outcome of this action? linux-perf-4.4 can't be installed * What outcome did you expect instead? both linux-perf 4.3 and 4.4 should be able to be installed together on a system and they should be usable depending on which kernel is running. Here's relevant output from apt-get dist-upgrade: Unpacking linux-perf-4.4 (4.4-1) ... dpkg: error processing archive /var/cache/apt/archives/linux-perf-4.4_4.4-1_amd64.deb (--unpack): trying to overwrite '/usr/share/perf-core/strace/groups/file', which is also in package linux-perf-4.3 4.3.1-2 *** End of the template - remove these template lines *** -- System Information: Debian Release: stretch/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386, armhf Kernel: Linux 4.3.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) --- End Message --- --- Begin Message --- Source: linux-tools Source-Version: 4.4-2 We believe that the bug you reported is fixed in the latest version of linux-tools, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 813...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Ben Hutchings (supplier of updated linux-tools package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@ftp-master.debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Fri, 19 Feb 2016 17:11:29 + Source: linux-tools Binary: linux-kbuild-4.4 linux-perf-4.4 libusbip-dev usbip hyperv-daemons lockdep liblockdep4.4 liblockdep-dev Architecture: source Version: 4.4-2 Distribution: unstable Urgency: medium Maintainer: Debian Kernel Team Changed-By: Ben Hutchings Description: hyperv-daemons - Support daemons for Linux running on Hyper-V liblockdep-dev - Runtime locking correctness validator (development files) liblockdep4.4 - Runtime locking correctness validator (shared library) libusbip-dev - USB device sharing system over IP network (development files) linux-kbuild-4.4 - Kbuild infrastructure for Linux 4.4 linux-perf-4.4 - Performance analysis tools for Linux 4.4 lockdep- Runtime locking correctness validator usbip - USB device sharing system over IP network Closes: 813080 Changes: linux-tools (4.4-2) unstable; urgency=medium . * linux-perf: Include version number in strace groups installation directory (Closes: #813080) * [alpha,sh4] Attempt to fix build failures * Build fixdep under debian/build and clean it up properly Checksums-Sha1: 6bc13491f451cb6d79e55c6a122f2bd8d11149bb 2951 linux-tools_4.4-2.dsc d7e8d5f0220320cf2990cb65952157f7fb352c8f 33800 linux-tools_4.4-2.debian.tar.xz Checksums-Sha256: 244d96f71f91dbd0f3bd0edb71ad542b65acfa8f8dcde22928a9af7a115697b4 2951 linux-tools_4.4-2.dsc eeccec7a64cc9c14cc6804528beebb60f6e072c3b0cfbcf740a5794438123ae6 33800 linux-tools_4.4-2.debian.tar.xz Files: c94d2ab7f53884cc8347cd2b6f302cca 2951 kernel optional linux-tools_4.4-2.dsc bc541c4ad377334123bfe3f28e553a5d 33800 kernel optional linux-tools_4.4-2.debian.tar.xz -BEGIN PGP SIGNATURE- Version: GnuPG v1 iQIVAwUBVsdNHOe/yOyVhhEJAQoeGQ/+I3XEDOtL2kNGIRZL5jzKbwerlFTh25na oXfU1d+8JSvkNdGgbOx
Bug#813080: marked as done (linux-perf-4.4: fails to upgrade from 'sid' - trying to overwrite /usr/share/perf-core/strace/groups/file)
Your message dated Fri, 19 Feb 2016 17:21:14 + with message-id and subject line Bug#813080: fixed in linux-tools 4.4-2 has caused the Debian Bug report #813080, regarding linux-perf-4.4: fails to upgrade from 'sid' - trying to overwrite /usr/share/perf-core/strace/groups/file to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 813080: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=813080 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: linux-perf-4.4 Version: 4.4-1~exp2 Severity: serious User: debian...@lists.debian.org Usertags: piuparts Hi, during a test with piuparts I noticed your package fails to upgrade from 'sid' to 'experimental'. It installed fine in 'sid', then the upgrade to 'experimental' fails because it tries to overwrite other packages files without declaring a Breaks+Replaces relation. See policy 7.6 at https://www.debian.org/doc/debian-policy/ch-relationships.html#s-replaces >From the attached log (scroll to the bottom...): Selecting previously unselected package linux-perf-4.4. Preparing to unpack .../linux-perf-4.4_4.4-1~exp2_amd64.deb ... Unpacking linux-perf-4.4 (4.4-1~exp2) ... dpkg: error processing archive /var/cache/apt/archives/linux-perf-4.4_4.4-1~exp2_amd64.deb (--unpack): trying to overwrite '/usr/share/perf-core/strace/groups/file', which is also in package linux-perf-4.3 4.3.1-2 Errors were encountered while processing: /var/cache/apt/archives/linux-perf-4.4_4.4-1~exp2_amd64.deb cheers, Andreas --- End Message --- --- Begin Message --- Source: linux-tools Source-Version: 4.4-2 We believe that the bug you reported is fixed in the latest version of linux-tools, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 813...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Ben Hutchings (supplier of updated linux-tools package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@ftp-master.debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Fri, 19 Feb 2016 17:11:29 + Source: linux-tools Binary: linux-kbuild-4.4 linux-perf-4.4 libusbip-dev usbip hyperv-daemons lockdep liblockdep4.4 liblockdep-dev Architecture: source Version: 4.4-2 Distribution: unstable Urgency: medium Maintainer: Debian Kernel Team Changed-By: Ben Hutchings Description: hyperv-daemons - Support daemons for Linux running on Hyper-V liblockdep-dev - Runtime locking correctness validator (development files) liblockdep4.4 - Runtime locking correctness validator (shared library) libusbip-dev - USB device sharing system over IP network (development files) linux-kbuild-4.4 - Kbuild infrastructure for Linux 4.4 linux-perf-4.4 - Performance analysis tools for Linux 4.4 lockdep- Runtime locking correctness validator usbip - USB device sharing system over IP network Closes: 813080 Changes: linux-tools (4.4-2) unstable; urgency=medium . * linux-perf: Include version number in strace groups installation directory (Closes: #813080) * [alpha,sh4] Attempt to fix build failures * Build fixdep under debian/build and clean it up properly Checksums-Sha1: 6bc13491f451cb6d79e55c6a122f2bd8d11149bb 2951 linux-tools_4.4-2.dsc d7e8d5f0220320cf2990cb65952157f7fb352c8f 33800 linux-tools_4.4-2.debian.tar.xz Checksums-Sha256: 244d96f71f91dbd0f3bd0edb71ad542b65acfa8f8dcde22928a9af7a115697b4 2951 linux-tools_4.4-2.dsc eeccec7a64cc9c14cc6804528beebb60f6e072c3b0cfbcf740a5794438123ae6 33800 linux-tools_4.4-2.debian.tar.xz Files: c94d2ab7f53884cc8347cd2b6f302cca 2951 kernel optional linux-tools_4.4-2.dsc bc541c4ad377334123bfe3f28e553a5d 33800 kernel optional linux-tools_4.4-2.debian.tar.xz -BEGIN PGP SIGNATURE- Version: GnuPG v1 iQIVAwUBVsdNHOe/yOyVhhEJAQoeGQ/+I3XEDOtL2kNGIRZL5jzKbwerlFTh25na oXfU1d+8JSvkNdGgbOx8U5ctvcCMBm3xwBZheACPbiT3iJ7shu8YaQL+Vn9RWkPr IUd4vf5dT0sLkGSG8g7qYZGiBGiO2SJnf8rEfyzLnvP+SZCNn+MwYph9+a/eIsdl dSDYbwrUhftUWqMbf7PsgxfeYA0BMN7XtvBRzX/HqcfgTNx3VXXeGISohlbcITNN hREOmkeYnJU7hZujvwEGLSh4BpK8Kn2ZMVirG+gDO34P5DgVGjlinAFy8uvjnsPZ v+xXoWa4Xlg8mZ+LYYUOOBJdy9/kP3lk+Mp3iGElaPWfnSw60hK/fphDRxx/EIjz f8QCsz5SZcxaKDa6RWf2AcQs0DQd4zquwjgVHb53KK+b/JPrn5AX1IAXAJXoXl9N 5/jeiUgPY3Jg2xsU5Pm+mkr2p5h6t2DBbeod0+6AlYZq
linux_4.4.2-2_multi.changes is NEW
binary:i2c-modules-4.4.0-1-arm64-di is NEW. binary:i2c-modules-4.4.0-1-loongson-2f-di is NEW. Your package has been put into the NEW queue, which requires manual action from the ftpteam to process. The upload was otherwise valid (it had a good OpenPGP signature and file hashes are valid), so please be patient. Packages are routinely processed through to the archive, and do feel free to browse the NEW queue[1]. If there is an issue with the upload, you will receive an email from a member of the ftpteam. If you have any questions, you may reply to this email. [1]: https://ftp-master.debian.org/new.html
Re: [PATCH 1/1] Build tools from power/cpupower
On Fri, Feb 19, 2016 at 03:37:50PM +, Ben Hutchings wrote: > On Fri, 2016-02-19 at 07:27 -0800, Mattia Dongili wrote: > > On Fri, Feb 19, 2016 at 02:30:26PM +, Ben Hutchings wrote: > > > On Thu, 2016-02-18 at 23:29 -0800, malat...@gmail.com wrote: > > > > From: Mattia Dongili > > > > > > > > They'll eventually replace cpufrequtils and libcpufreq{0,-dev} so the > > > > structure of the packages is the same. > > > [...] > > > > > > This is not passing the proper build flags: > > > > > > W: libcpupower0: hardening-no-relro usr/lib/libcpupower.so.0.0.0 > > > W: linux-cpupower: hardening-no-relro usr/bin/cpupower > > > W: linux-cpupower: hardening-no-relro usr/sbin/cpufreq-bench > > > W: linux-cpupower-dbgsym: debug-file-with-no-debug-symbols > > > usr/lib/debug/.build-id/40/fd11393c987a84eaf7a98448d72ec8d8f87414.debug > > > W: libcpupower0-dbgsym: debug-file-with-no-debug-symbols > > > usr/lib/debug/.build-id/ed/bc6af9a235be2cc306d10b33632fa4dd071a3b.debug > > > > I didn't pay too much attention these warnings because linux-perf has > > similar ones. I should have mentioned that. > > > > E: linux-perf-4.5: binary-from-other-architecture > > usr/lib/perf_4.5-core/perf-read-vdsox32 > > This is expected but should probably be overridden. Ok. Override it is. > > W: linux-perf-4.5-dbgsym: debug-file-with-no-debug-symbols > > usr/lib/debug/.build-id/c5/55a9d59fa355fd0dddb74d5e6322020c51be07.debug > > W: linux-perf-4.5-dbgsym: debug-file-with-no-debug-symbols > > usr/lib/debug/.build-id/db/dc04fd210c88261daff32f95aadd09e70a7113.debug > > W: linux-perf-4.5: executable-not-elf-or-script > > usr/share/perf-core/strace/groups/file > > W: linux-perf-4.5: hardening-no-relro usr/lib/perf_4.5-core/perf-read-vdso32 > > W: linux-perf-4.5: hardening-no-relro > > usr/lib/perf_4.5-core/perf-read-vdsox32 > [...] > > Those two may be difficult to fix, since they aren't built with the > same flags as other executables. Ok, I haven't really looked at how linux-perf is built yet. Thanks for the note. > Is there any reason not to add cpupower on the sid branch rather than > master (which means it will stay in experimental for the next ~2 > months)? The sid branch is fine, I'll rebase on that for the next revision. -- mattia :wq! signature.asc Description: PGP signature
Processing of linux_4.4.2-2_multi.changes
linux_4.4.2-2_multi.changes uploaded successfully to localhost along with the files: linux_4.4.2-2.dsc linux_4.4.2-2.debian.tar.xz linux-doc-4.4_4.4.2-2_all.deb linux-manual-4.4_4.4.2-2_all.deb linux-source-4.4_4.4.2-2_all.deb linux-support-4.4.0-1_4.4.2-2_all.deb Greetings, Your Debian queue daemon (running on host franck.debian.org)
Re: [PATCH 1/1] Build tools from power/cpupower
On Fri, 2016-02-19 at 07:27 -0800, Mattia Dongili wrote: > On Fri, Feb 19, 2016 at 02:30:26PM +, Ben Hutchings wrote: > > On Thu, 2016-02-18 at 23:29 -0800, malat...@gmail.com wrote: > > > From: Mattia Dongili > > > > > > They'll eventually replace cpufrequtils and libcpufreq{0,-dev} so the > > > structure of the packages is the same. > > [...] > > > > This is not passing the proper build flags: > > > > W: libcpupower0: hardening-no-relro usr/lib/libcpupower.so.0.0.0 > > W: linux-cpupower: hardening-no-relro usr/bin/cpupower > > W: linux-cpupower: hardening-no-relro usr/sbin/cpufreq-bench > > W: linux-cpupower-dbgsym: debug-file-with-no-debug-symbols > > usr/lib/debug/.build-id/40/fd11393c987a84eaf7a98448d72ec8d8f87414.debug > > W: libcpupower0-dbgsym: debug-file-with-no-debug-symbols > > usr/lib/debug/.build-id/ed/bc6af9a235be2cc306d10b33632fa4dd071a3b.debug > > I didn't pay too much attention these warnings because linux-perf has > similar ones. I should have mentioned that. > > E: linux-perf-4.5: binary-from-other-architecture > usr/lib/perf_4.5-core/perf-read-vdsox32 This is expected but should probably be overridden. > W: linux-perf-4.5-dbgsym: debug-file-with-no-debug-symbols > usr/lib/debug/.build-id/c5/55a9d59fa355fd0dddb74d5e6322020c51be07.debug > W: linux-perf-4.5-dbgsym: debug-file-with-no-debug-symbols > usr/lib/debug/.build-id/db/dc04fd210c88261daff32f95aadd09e70a7113.debug > W: linux-perf-4.5: executable-not-elf-or-script > usr/share/perf-core/strace/groups/file > W: linux-perf-4.5: hardening-no-relro usr/lib/perf_4.5-core/perf-read-vdso32 > W: linux-perf-4.5: hardening-no-relro usr/lib/perf_4.5-core/perf-read-vdsox32 [...] Those two may be difficult to fix, since they aren't built with the same flags as other executables. Is there any reason not to add cpupower on the sid branch rather than master (which means it will stay in experimental for the next ~2 months)? Ben. -- Ben Hutchings Tomorrow will be cancelled due to lack of interest. signature.asc Description: This is a digitally signed message part
Re: [PATCH 1/1] Build tools from power/cpupower
On Fri, Feb 19, 2016 at 02:30:26PM +, Ben Hutchings wrote: > On Thu, 2016-02-18 at 23:29 -0800, malat...@gmail.com wrote: > > From: Mattia Dongili > > > > They'll eventually replace cpufrequtils and libcpufreq{0,-dev} so the > > structure of the packages is the same. > [...] > > This is not passing the proper build flags: > > W: libcpupower0: hardening-no-relro usr/lib/libcpupower.so.0.0.0 > W: linux-cpupower: hardening-no-relro usr/bin/cpupower > W: linux-cpupower: hardening-no-relro usr/sbin/cpufreq-bench > W: linux-cpupower-dbgsym: debug-file-with-no-debug-symbols > usr/lib/debug/.build-id/40/fd11393c987a84eaf7a98448d72ec8d8f87414.debug > W: libcpupower0-dbgsym: debug-file-with-no-debug-symbols > usr/lib/debug/.build-id/ed/bc6af9a235be2cc306d10b33632fa4dd071a3b.debug I didn't pay too much attention these warnings because linux-perf has similar ones. I should have mentioned that. E: linux-perf-4.5: binary-from-other-architecture usr/lib/perf_4.5-core/perf-read-vdsox32 W: linux-perf-4.5-dbgsym: debug-file-with-no-debug-symbols usr/lib/debug/.build-id/c5/55a9d59fa355fd0dddb74d5e6322020c51be07.debug W: linux-perf-4.5-dbgsym: debug-file-with-no-debug-symbols usr/lib/debug/.build-id/db/dc04fd210c88261daff32f95aadd09e70a7113.debug W: linux-perf-4.5: executable-not-elf-or-script usr/share/perf-core/strace/groups/file W: linux-perf-4.5: hardening-no-relro usr/lib/perf_4.5-core/perf-read-vdso32 W: linux-perf-4.5: hardening-no-relro usr/lib/perf_4.5-core/perf-read-vdsox32 W: linux-perf-4.5: manpage-has-errors-from-man usr/share/man/man1/perf_4.5-report.1.gz 683: warning [p 4, 4.7i]: can't break line debug-file-with-no-debug-symbols warnings are new to 4.5 both for perf and cpupower, I didn' see them a few days ago when playing around with 4.4. I'll see if I can fix all of them. > There are some other lintian warnings that should be easy to fix: > > W: linux-cpupower: script-with-language-extension > usr/bin/cpufreq-bench_plot.sh > W: linux-cpupower: manpage-has-bad-whatis-entry > usr/share/man/man1/cpupower-frequency-info.1.gz > W: linux-cpupower: manpage-has-bad-whatis-entry > usr/share/man/man1/cpupower-frequency-set.1.gz > W: linux-cpupower: manpage-has-bad-whatis-entry > usr/share/man/man1/cpupower-idle-info.1.gz > W: linux-cpupower: manpage-has-bad-whatis-entry ... use > --no-tag-display-limit to see all (or pipe to a file/program) I'll get these fixed too. Stay tuned. -- mattia :wq! signature.asc Description: PGP signature
Bug#815126: linux-image-4.4.0-1-amd64 hangs after 'Loading initial ramdisk ...'
On Fri, 19 Feb 2016 10:50:34 +0100 Vincent Bernat wrote: > ❦ 19 février 2016 07:34 GMT, Jim Barber  : > > Booting back into linux-4.3.0-1-amd64 works fine. > > I am in the same situation. I am also on the same system (Thinkpad X1 > Carbon, but 2nd). Same here on a Dell XPS 13 2015, but linux-image-4.4.0-trunk-amd64 works fine (which is version 4.4.1 vs. 4.4.2 for the 4.4.0-1 package). The Debian changelog for the current package contains this, which looks like the culprit, but I didn't test this: * [x86] Fix issues resulting in W+X pages: - [amd64] efi: Build our own page table structure Regards, -- ┊ Sebastian Fontius ┊ └───┬───┴─┐ │ ‘They that can give up essential liberty to obtain a little │ │ temporary safety deserve neither liberty nor safety.’ │ ┊ Attributed to Benjamin Franklin, 1759 ┊ signature.asc Description: This is a digitally signed message part
Re: [PATCH 1/1] Build tools from power/cpupower
On Thu, 2016-02-18 at 23:29 -0800, malat...@gmail.com wrote: > From: Mattia Dongili > > They'll eventually replace cpufrequtils and libcpufreq{0,-dev} so the > structure of the packages is the same. [...] This is not passing the proper build flags: W: libcpupower0: hardening-no-relro usr/lib/libcpupower.so.0.0.0 W: linux-cpupower: hardening-no-relro usr/bin/cpupower W: linux-cpupower: hardening-no-relro usr/sbin/cpufreq-bench W: linux-cpupower-dbgsym: debug-file-with-no-debug-symbols usr/lib/debug/.build-id/40/fd11393c987a84eaf7a98448d72ec8d8f87414.debug W: libcpupower0-dbgsym: debug-file-with-no-debug-symbols usr/lib/debug/.build-id/ed/bc6af9a235be2cc306d10b33632fa4dd071a3b.debug There are some other lintian warnings that should be easy to fix: W: linux-cpupower: script-with-language-extension usr/bin/cpufreq-bench_plot.sh W: linux-cpupower: manpage-has-bad-whatis-entry usr/share/man/man1/cpupower-frequency-info.1.gz W: linux-cpupower: manpage-has-bad-whatis-entry usr/share/man/man1/cpupower-frequency-set.1.gz W: linux-cpupower: manpage-has-bad-whatis-entry usr/share/man/man1/cpupower-idle-info.1.gz W: linux-cpupower: manpage-has-bad-whatis-entry ... use --no-tag-display-limit to see all (or pipe to a file/program) Ben. signature.asc Description: This is a digitally signed message part
Bug#815125: linux-image-4.4.0-1-amd64 fails to load initrd - no booting
Package: linux-image-4.4.0-1-amd64 Version: 4.4.2-1 Followup-For: Bug #815125 Same problem on a elitebook 8470 and Dell Latitude E7450 -- System Information: Debian Release: stretch/sid APT prefers stable-updates APT policy: (900, 'stable-updates'), (900, 'testing'), (800, 'stable'), (500, 'testing-proposed-updates'), (500, 'proposed-updates'), (300, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.4.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.58 ii initramfs-tools [linux-initramfs-tool] 0.120 ii kmod22-1 ii linux-base 4.0 Versions of packages linux-image-4.4.0-1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2 Versions of packages linux-image-4.4.0-1-amd64 suggests: pn debian-kernel-handbook ii extlinux3:6.03+dfsg-11 pn linux-doc-4.4 -- debconf information: linux-image-4.4.0-1-amd64/prerm/removing-running-kernel-4.4.0-1-amd64: true
Bug#815126: linux-image-4.4.0-1-amd64 hangs after 'Loading initial ramdisk ...'
❦ 19 février 2016 07:34 GMT, Jim Barber : > I upgraded from linux-image-4.3.0-1-amd64 (version 4.3.5-1) to > linux-image-4.4.0-1-amd64. > On rebooting the system I am presented with grub, and then start booting into > Linux. > I only get to see 2 lines with the cursor below them on the lefthand side. > > Loading Linux 4.4.0-1 ... > Loading initial ramdisk ... > _ > > The system freezes at this point and is unresponsive. > I have to hold my power button down for approx 10s to power off the laptop. > Booting back into linux-4.3.0-1-amd64 works fine. I am in the same situation. I am also on the same system (Thinkpad X1 Carbon, but 2nd). > Because the boot hangs so early I can't provide any useful diagnostic > information. Ditto. I tried modeset=0, without any change. -- Choose variable names that won't be confused. - The Elements of Programming Style (Kernighan & Plauger) signature.asc Description: PGP signature