Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Hello Damien, Thanks for looking into the problem: On Wed 09 Mar 2022 at 16:11:37 +0900 Damien Le Moal wrote: [...] > Could you try this patch: > > diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c [...] I am very sorry, but I am a simple user, not a developer. It would need a lot of tuition to make me accomplish that, and I'm not sure I'd have enough time at the moment. > Not sure if it will help, especially if you have a clean boot with 5.15 > ? If you do, could you also send me the full dmesg of a boot with 5.15 > kernel ? No video, dmesg output :) > > I suspect that my patch that increases the timeout for read log may be > the cause for the "hang", but the root cause is that the laptop drive > does not like read log commands (there are some drives like that). > Before the patch, the failure was faster and somehow ignored. I would > like to see if dmesg shows the failures with 5.15. Okay, that's easier: See attached dmesg-T41-k5.15.txt . HTH a little. Best regards, Petra [0.00] Linux version 5.15.0-3-686 (debian-kernel@lists.debian.org) (gcc-11 (Debian 11.2.0-14) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37.90.20220123) #1 SMP Debian 5.15.15-2 (2022-01-30) [0.00] x86/fpu: x87 FPU will use FXSAVE [0.00] signal: max sigframe size: 1440 [0.00] BIOS-provided physical RAM map: [0.00] BIOS-e820: [mem 0x-0x0009efff] usable [0.00] BIOS-e820: [mem 0x0009f000-0x0009] reserved [0.00] BIOS-e820: [mem 0x000d2000-0x000d3fff] reserved [0.00] BIOS-e820: [mem 0x000dc000-0x000f] reserved [0.00] BIOS-e820: [mem 0x0010-0x1ff5] usable [0.00] BIOS-e820: [mem 0x1ff6-0x1ff76fff] ACPI data [0.00] BIOS-e820: [mem 0x1ff77000-0x1ff78fff] ACPI NVS [0.00] BIOS-e820: [mem 0x1ff8-0x1fff] reserved [0.00] BIOS-e820: [mem 0xff80-0x] reserved [0.00] Notice: NX (Execute Disable) protection missing in CPU! [0.00] SMBIOS 2.3 present. [0.00] DMI: IBM 2374H12/2374H12, BIOS 1RETC6WW (3.05a) 05/14/2004 [0.00] tsc: Fast TSC calibration using PIT [0.00] tsc: Detected 1398.789 MHz processor [0.005574] e820: update [mem 0x-0x0fff] usable ==> reserved [0.005584] e820: remove [mem 0x000a-0x000f] usable [0.005599] last_pfn = 0x1ff60 max_arch_pfn = 0x10 [0.006397] x86/PAT: PAT not supported by the CPU. [0.007306] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [0.017285] initial memory mapped: [mem 0x-0x0eff] [0.017349] RAMDISK: [mem 0x1d5c9000-0x1ed2] [0.017361] ACPI: Early table checksum verification disabled [0.017371] ACPI: RSDP 0x000F6E00 24 (v02 IBM ) [0.017384] ACPI: XSDT 0x1FF6AF83 4C (v01 IBMTP-1R 3051 LTP ) [0.017400] ACPI: FACP 0x1FF6B000 F4 (v03 IBMTP-1R 3051 IBM 0001) [0.017415] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20210730/tbfadt-564) [0.017425] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x102C/0x0 (20210730/tbfadt-615) [0.017439] ACPI: DSDT 0x1FF6B1E7 00BC1F (v01 IBMTP-1R 3051 MSFT 010E) [0.017452] ACPI: FACS 0x1FF78000 40 [0.017461] ACPI: FACS 0x1FF78000 40 [0.017471] ACPI: SSDT 0x1FF6B1B4 33 (v01 IBMTP-1R 3051 MSFT 010E) [0.017484] ACPI: ECDT 0x1FF76E06 52 (v01 IBMTP-1R 3051 IBM 0001) [0.017496] ACPI: TCPA 0x1FF76E58 32 (v01 IBMTP-1R 3051 PTL 0001) [0.017507] ACPI: BOOT 0x1FF76FD8 28 (v01 IBMTP-1R 3051 LTP 0001) [0.017518] ACPI: Reserving FACP table memory at [mem 0x1ff6b000-0x1ff6b0f3] [0.017524] ACPI: Reserving DSDT table memory at [mem 0x1ff6b1e7-0x1ff76e05] [0.017529] ACPI: Reserving FACS table memory at [mem 0x1ff78000-0x1ff7803f] [0.017535] ACPI: Reserving FACS table memory at [mem 0x1ff78000-0x1ff7803f] [0.017540] ACPI: Reserving SSDT table memory at [mem 0x1ff6b1b4-0x1ff6b1e6] [0.017545] ACPI: Reserving ECDT table memory at [mem 0x1ff76e06-0x1ff76e57] [0.017551] ACPI: Reserving TCPA table memory at [mem 0x1ff76e58-0x1ff76e89] [0.017556] ACPI: Reserving BOOT table memory at [mem 0x1ff76fd8-0x1ff76fff] [0.017580] 0MB HIGHMEM available. [0.017584] 511MB LOWMEM available. [0.017587] mapped low ram: 0 - 1ff6 [0.017592] low ram: 0 - 1ff6 [0.017611] Zone ranges: [0.017614] DMA [mem 0x1000-0x00ff] [0.017622] Normal [mem 0x0100-0x1ff5] [0.017629] HighMem empty [
linux_5.16.12-1~bpo11+1_source.changes is NEW
binary:affs-modules-5.16.0-0.bpo.4-4kc-malta-di is NEW. binary:affs-modules-5.16.0-0.bpo.4-5kc-malta-di is NEW. binary:affs-modules-5.16.0-0.bpo.4-loongson-3-di is NEW. binary:affs-modules-5.16.0-0.bpo.4-mips32r2el-di is NEW. binary:affs-modules-5.16.0-0.bpo.4-mips64r2el-di is NEW. binary:affs-modules-5.16.0-0.bpo.4-octeon-di is NEW. binary:ata-modules-5.16.0-0.bpo.4-4kc-malta-di is NEW. binary:ata-modules-5.16.0-0.bpo.4-5kc-malta-di is NEW. binary:ata-modules-5.16.0-0.bpo.4-armmp-di is NEW. binary:ata-modules-5.16.0-0.bpo.4-loongson-3-di is NEW. binary:ata-modules-5.16.0-0.bpo.4-mips32r2el-di is NEW. binary:ata-modules-5.16.0-0.bpo.4-mips64r2el-di is NEW. binary:ata-modules-5.16.0-0.bpo.4-octeon-di is NEW. binary:ata-modules-5.16.0-0.bpo.4-powerpc64le-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.4-4kc-malta-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.4-5kc-malta-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.4-armmp-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.4-loongson-3-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.4-marvell-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.4-mips32r2el-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.4-mips64r2el-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.4-octeon-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.4-powerpc64le-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.4-s390x-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.4-4kc-malta-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.4-5kc-malta-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.4-armmp-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.4-loongson-3-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.4-marvell-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.4-mips32r2el-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.4-mips64r2el-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.4-octeon-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.4-powerpc64le-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.4-s390x-di is NEW. binary:crc-modules-5.16.0-0.bpo.4-4kc-malta-di is NEW. binary:crc-modules-5.16.0-0.bpo.4-5kc-malta-di is NEW. binary:crc-modules-5.16.0-0.bpo.4-armmp-di is NEW. binary:crc-modules-5.16.0-0.bpo.4-loongson-3-di is NEW. binary:crc-modules-5.16.0-0.bpo.4-marvell-di is NEW. binary:crc-modules-5.16.0-0.bpo.4-mips32r2el-di is NEW. binary:crc-modules-5.16.0-0.bpo.4-mips64r2el-di is NEW. binary:crc-modules-5.16.0-0.bpo.4-octeon-di is NEW. binary:crc-modules-5.16.0-0.bpo.4-powerpc64le-di is NEW. binary:crc-modules-5.16.0-0.bpo.4-s390x-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.4-4kc-malta-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.4-5kc-malta-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.4-armmp-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.4-loongson-3-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.4-marvell-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.4-mips32r2el-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.4-mips64r2el-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.4-octeon-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.4-powerpc64le-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.4-s390x-di is NEW. binary:crypto-modules-5.16.0-0.bpo.4-4kc-malta-di is NEW. binary:crypto-modules-5.16.0-0.bpo.4-5kc-malta-di is NEW. binary:crypto-modules-5.16.0-0.bpo.4-armmp-di is NEW. binary:crypto-modules-5.16.0-0.bpo.4-loongson-3-di is NEW. binary:crypto-modules-5.16.0-0.bpo.4-marvell-di is NEW. binary:crypto-modules-5.16.0-0.bpo.4-mips32r2el-di is NEW. binary:crypto-modules-5.16.0-0.bpo.4-mips64r2el-di is NEW. binary:crypto-modules-5.16.0-0.bpo.4-octeon-di is NEW. binary:crypto-modules-5.16.0-0.bpo.4-powerpc64le-di is NEW. binary:crypto-modules-5.16.0-0.bpo.4-s390x-di is NEW. binary:dasd-extra-modules-5.16.0-0.bpo.4-s390x-di is NEW. binary:dasd-modules-5.16.0-0.bpo.4-s390x-di is NEW. binary:efi-modules-5.16.0-0.bpo.4-armmp-di is NEW. binary:event-modules-5.16.0-0.bpo.4-4kc-malta-di is NEW. binary:event-modules-5.16.0-0.bpo.4-5kc-malta-di is NEW. binary:event-modules-5.16.0-0.bpo.4-armmp-di is NEW. binary:event-modules-5.16.0-0.bpo.4-loongson-3-di is NEW. binary:event-modules-5.16.0-0.bpo.4-marvell-di is NEW. binary:event-modules-5.16.0-0.bpo.4-mips32r2el-di is NEW. binary:event-modules-5.16.0-0.bpo.4-mips64r2el-di is NEW. binary:event-modules-5.16.0-0.bpo.4-octeon-di is NEW. binary:event-modules-5.16.0-0.bpo.4-powerpc64le-di is NEW. binary:ext4-modules-5.16.0-0.bpo.4-4kc-malta-di is NEW. binary:ext4-modules-5.16.0-0.bpo.4-5kc-malta-di is NEW. binary:ext4-modules-5.16.0-0.bpo.4-armmp-di is NEW. binary:ext4-modules-5.16.0-0.bpo.4-loongson-3-di is NEW. binary:ext4-modules-5.16.0-0.bpo.4-marvell-di is NEW. binary:ext4-modules-5.16.0-0.bpo.4-mips32r2el-di is NEW. binary:ext4-modules-5.16.0-0.bpo.4-mips64r2el-di is NEW. binary:ext4-modules-5.16.0-0.bpo.4-octeon-di is NEW. binary:ext4-modules-5.16.0-0.bpo.4-powerpc64le-di is NEW. binary:ext4-modules-5.16.0-0.bpo.4-s390x-di is NEW. binary:f2fs-modules-5.16.0-0.bpo.4-4kc-malta-di is NEW. binary:f2fs-modules-5.16.0-0.bpo.4-5kc-malta-di is NEW.
Processing of linux_5.16.12-1~bpo11+1_source.changes
linux_5.16.12-1~bpo11+1_source.changes uploaded successfully to localhost along with the files: linux_5.16.12-1~bpo11+1.dsc linux_5.16.12-1~bpo11+1.debian.tar.xz linux_5.16.12-1~bpo11+1_source.buildinfo Greetings, Your Debian queue daemon (running on host usper.debian.org)
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Hello, I am the "OP" with the T41 Thinkpads. On Tue 08 Mar 2022 at 05:58:53 +0900 Damien Le Moal wrote: > Could you try taking a video of the boot messages ? You can find my first attempt (only ≈12MB) here: https://prp.in-berlin.de/MAQ01257.MP4 I will leave it there for 2 weeks. Not sure if I got the loglevel right and whether the image is clear enough. BTW: This is really a T41 Thinkpad; I'm using it with an external monitor because its display is broken. Best regards, Petra
linux_5.10.103-1~bpo10+1_source.changes REJECTED
linux_5.10.103-1~bpo10+1.dsc: Refers to non-existing file 'linux_5.10.103.orig.tar.xz' Perhaps you need to include the file in your upload? If the orig tarball is missing, the -sa flag for dpkg-buildpackage will be your friend. === Please feel free to respond to this email if you don't understand why your files were rejected, or if you upload new files which address our concerns.
Processing of linux_5.10.103-1~bpo10+1_source.changes
linux_5.10.103-1~bpo10+1_source.changes uploaded successfully to localhost along with the files: linux_5.10.103-1~bpo10+1.dsc linux_5.10.103-1~bpo10+1.debian.tar.xz linux_5.10.103-1~bpo10+1_source.buildinfo Greetings, Your Debian queue daemon (running on host usper.debian.org)
linux-4.19_4.19.232-1~deb9u1_source.changes REJECTED
The suite "oldoldstable-proposed-updates" does not accept source uploads. Mapping oldoldstable-security to oldoldstable-proposed-updates. binary:linux-config-4.19 is NEW. binary:linux-doc-4.19 is NEW. binary:linux-headers-4.19.0-0.bpo.19-4kc-malta is NEW. binary:linux-headers-4.19.0-0.bpo.19-5kc-malta is NEW. binary:linux-headers-4.19.0-0.bpo.19-686 is NEW. binary:linux-headers-4.19.0-0.bpo.19-686-pae is NEW. binary:linux-headers-4.19.0-0.bpo.19-all is NEW. binary:linux-headers-4.19.0-0.bpo.19-all-amd64 is NEW. binary:linux-headers-4.19.0-0.bpo.19-all-arm64 is NEW. binary:linux-headers-4.19.0-0.bpo.19-all-armel is NEW. binary:linux-headers-4.19.0-0.bpo.19-all-armhf is NEW. binary:linux-headers-4.19.0-0.bpo.19-all-i386 is NEW. binary:linux-headers-4.19.0-0.bpo.19-all-mips is NEW. binary:linux-headers-4.19.0-0.bpo.19-all-mips64el is NEW. binary:linux-headers-4.19.0-0.bpo.19-all-mipsel is NEW. binary:linux-headers-4.19.0-0.bpo.19-all-ppc64el is NEW. binary:linux-headers-4.19.0-0.bpo.19-all-s390x is NEW. binary:linux-headers-4.19.0-0.bpo.19-amd64 is NEW. binary:linux-headers-4.19.0-0.bpo.19-arm64 is NEW. binary:linux-headers-4.19.0-0.bpo.19-armmp is NEW. binary:linux-headers-4.19.0-0.bpo.19-armmp-lpae is NEW. binary:linux-headers-4.19.0-0.bpo.19-cloud-amd64 is NEW. binary:linux-headers-4.19.0-0.bpo.19-common is NEW. binary:linux-headers-4.19.0-0.bpo.19-common-rt is NEW. binary:linux-headers-4.19.0-0.bpo.19-loongson-3 is NEW. binary:linux-headers-4.19.0-0.bpo.19-marvell is NEW. binary:linux-headers-4.19.0-0.bpo.19-octeon is NEW. binary:linux-headers-4.19.0-0.bpo.19-powerpc64le is NEW. binary:linux-headers-4.19.0-0.bpo.19-rpi is NEW. binary:linux-headers-4.19.0-0.bpo.19-rt-686-pae is NEW. binary:linux-headers-4.19.0-0.bpo.19-rt-amd64 is NEW. binary:linux-headers-4.19.0-0.bpo.19-rt-arm64 is NEW. binary:linux-headers-4.19.0-0.bpo.19-rt-armmp is NEW. binary:linux-headers-4.19.0-0.bpo.19-s390x is NEW. binary:linux-image-4.19.0-0.bpo.19-4kc-malta is NEW. binary:linux-image-4.19.0-0.bpo.19-4kc-malta-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-5kc-malta is NEW. binary:linux-image-4.19.0-0.bpo.19-5kc-malta-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-686 is NEW. binary:linux-image-4.19.0-0.bpo.19-686-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-686-pae is NEW. binary:linux-image-4.19.0-0.bpo.19-686-pae-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-amd64 is NEW. binary:linux-image-4.19.0-0.bpo.19-amd64-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-arm64 is NEW. binary:linux-image-4.19.0-0.bpo.19-arm64-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-armmp is NEW. binary:linux-image-4.19.0-0.bpo.19-armmp-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-armmp-lpae is NEW. binary:linux-image-4.19.0-0.bpo.19-armmp-lpae-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-cloud-amd64 is NEW. binary:linux-image-4.19.0-0.bpo.19-cloud-amd64-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-loongson-3 is NEW. binary:linux-image-4.19.0-0.bpo.19-loongson-3-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-marvell is NEW. binary:linux-image-4.19.0-0.bpo.19-marvell-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-octeon is NEW. binary:linux-image-4.19.0-0.bpo.19-octeon-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-powerpc64le is NEW. binary:linux-image-4.19.0-0.bpo.19-powerpc64le-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-rpi is NEW. binary:linux-image-4.19.0-0.bpo.19-rpi-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-rt-686-pae is NEW. binary:linux-image-4.19.0-0.bpo.19-rt-686-pae-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-rt-amd64 is NEW. binary:linux-image-4.19.0-0.bpo.19-rt-amd64-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-rt-arm64 is NEW. binary:linux-image-4.19.0-0.bpo.19-rt-arm64-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-rt-armmp is NEW. binary:linux-image-4.19.0-0.bpo.19-rt-armmp-dbg is NEW. binary:linux-image-4.19.0-0.bpo.19-s390x is NEW. binary:linux-image-4.19.0-0.bpo.19-s390x-dbg is NEW. binary:linux-kbuild-4.19 is NEW. binary:linux-perf-4.19 is NEW. binary:linux-source-4.19 is NEW. binary:linux-support-4.19.0-0.bpo.19 is NEW. source:linux-4.19 is NEW. === Please feel free to respond to this email if you don't understand why your files were rejected, or if you upload new files which address our concerns.
Re: Problem: USB Ethernet PCI-E card does not work with kernel 5.10.0-11-amd64
Yes, I also believe it's all caused by the xhci_hcd issue. I did open a proper kernel issue report: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1006477 You can see in that report that the card worked ok with the newest vanilla kernel. But I don't know what fixed it yet andI have not had time to do any furher investigation. FYI, I won't update this thread anymore, but if anyone is interested in contributing ideas, information, etc, please would you do it on the issue report itself? Thanks for all the help! On Tue, Mar 8, 2022, 4:59 AM Bjørn Mork wrote: > Flacusbigotis writes: > > > The kernel logs indicating issues in Bullseye include a warning of a > "host > > failure" by xhci_hcd, and several write/read errors by the ax88179 > ethernet > > driver/module for the card, as follows: > > > > Feb 22 17:22:53 server1 kernel: [1.380198] xhci_hcd :1c:00.0: > xHCI > > Host Controller > > Feb 22 17:22:53 server1 kernel: [1.380205] xhci_hcd :1c:00.0: new > > USB bus registered, assigned bus number 5 > > Feb 22 17:22:53 server1 kernel: [1.380209] xhci_hcd :1c:00.0: > Host > > supports USB 3.0 SuperSpeed > > Feb 22 17:22:53 server1 kernel: [1.380260] usb usb5: New USB device > > found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 > > Feb 22 17:22:53 server1 kernel: [1.380261] usb usb5: New USB device > > strings: Mfr=3, Product=2, SerialNumber=1 > > Feb 22 17:22:53 server1 kernel: [1.380263] usb usb5: Product: xHCI > Host > > Controller > > Feb 22 17:22:53 server1 kernel: [1.380264] usb usb5: Manufacturer: > > Linux 5.10.0-11-amd64 xhci-hcd > > Feb 22 17:22:53 server1 kernel: [1.380265] usb usb5: SerialNumber: > > :1c:00.0 > > Feb 22 17:22:53 server1 kernel: [1.380396] hub 5-0:1.0: USB hub found > > Feb 22 17:22:53 server1 kernel: [1.380411] hub 5-0:1.0: 4 ports > detected > > Feb 22 17:22:53 server1 kernel: [5.508457] ax88179_178a 5-1:1.0 eth0: > > register 'ax88179_178a' at usb-:1c:00.0-1, ASIX AX88179 USB 3.0 > Gigabit > > Ethernet, 00:11:22:33:44:55 > > Feb 22 17:23:25 server1 kernel: [ 39.576966] xhci_hcd :1c:00.0: > > WARNING: Host System Error > > Feb 22 17:26:00 server1 kernel: [ 194.596335] ax88179_178a 5-1:1.0 > > enx001122334455: Failed to read reg index 0x0002: -22 > > I am guessing that the random mac address is a symptom caused by a > failure to read the permanent mac from the USB ethernet > controller. Which again probably is caused by one or more of these read > errors. > > But I believe those are only symptoms, and that the real error is that > unspecified "Host System Error". > > I wonder is this could be related to some of the quirks that have been > added for this xhci controller since v4.19? There have been a few since > the VL805 is used in the RPi4. Some of these might very well be > misunderstood and RPI related only. There is also an odd code path in > drivers/usb/host/pci-quirks.c where we select a different path on RPi > than on other systems because "things are taken care of by the board's > co-processor". I find that very suspiscious. > > And I must admit that my interest in this bug is because I'm worried > that the quirk I recently pushed could have unexpected side effects... > I have no clue. > > but the most likely cause is some power managenment issue. Test > disabling ASPM e.g. by adding pcie_aspm=off to the kernel command line. > > Or disabling USB autosuspend, e.g by adding usbcore.autosuspend=-1 to the > kernel command line. > > I do NOT suggest that you run with those settings by default. Only > testing to try to narrow down the problem. > > It would also be intersting to know if removing the XHCI_LPM_SUPPORT > quirk would make a difference, since this was added to the VL805 between > v4.19 and v5.10 without anyone really knowing if it works.. But I can't > figure out how to disable a device specific quirk like that without > patching the kernel. Anyone? > > > > Bjørn >
linux_4.9.303-1_source.changes REJECTED
The suite "oldoldstable-proposed-updates" does not accept source uploads. Mapping oldoldstable-security to oldoldstable-proposed-updates. binary:acpi-modules-4.9.0-18-686-di is NEW. binary:acpi-modules-4.9.0-18-686-pae-di is NEW. binary:acpi-modules-4.9.0-18-amd64-di is NEW. binary:affs-modules-4.9.0-18-4kc-malta-di is NEW. binary:affs-modules-4.9.0-18-5kc-malta-di is NEW. binary:affs-modules-4.9.0-18-loongson-3-di is NEW. binary:affs-modules-4.9.0-18-octeon-di is NEW. binary:ata-modules-4.9.0-18-4kc-malta-di is NEW. binary:ata-modules-4.9.0-18-5kc-malta-di is NEW. binary:ata-modules-4.9.0-18-686-di is NEW. binary:ata-modules-4.9.0-18-686-pae-di is NEW. binary:ata-modules-4.9.0-18-amd64-di is NEW. binary:ata-modules-4.9.0-18-arm64-di is NEW. binary:ata-modules-4.9.0-18-armmp-di is NEW. binary:ata-modules-4.9.0-18-loongson-3-di is NEW. binary:ata-modules-4.9.0-18-powerpc64le-di is NEW. binary:btrfs-modules-4.9.0-18-4kc-malta-di is NEW. binary:btrfs-modules-4.9.0-18-5kc-malta-di is NEW. binary:btrfs-modules-4.9.0-18-686-di is NEW. binary:btrfs-modules-4.9.0-18-686-pae-di is NEW. binary:btrfs-modules-4.9.0-18-amd64-di is NEW. binary:btrfs-modules-4.9.0-18-arm64-di is NEW. binary:btrfs-modules-4.9.0-18-armmp-di is NEW. binary:btrfs-modules-4.9.0-18-loongson-3-di is NEW. binary:btrfs-modules-4.9.0-18-marvell-di is NEW. binary:btrfs-modules-4.9.0-18-octeon-di is NEW. binary:btrfs-modules-4.9.0-18-powerpc64le-di is NEW. binary:btrfs-modules-4.9.0-18-s390x-di is NEW. binary:cdrom-core-modules-4.9.0-18-4kc-malta-di is NEW. binary:cdrom-core-modules-4.9.0-18-5kc-malta-di is NEW. binary:cdrom-core-modules-4.9.0-18-686-di is NEW. binary:cdrom-core-modules-4.9.0-18-686-pae-di is NEW. binary:cdrom-core-modules-4.9.0-18-amd64-di is NEW. binary:cdrom-core-modules-4.9.0-18-arm64-di is NEW. binary:cdrom-core-modules-4.9.0-18-loongson-3-di is NEW. binary:cdrom-core-modules-4.9.0-18-marvell-di is NEW. binary:cdrom-core-modules-4.9.0-18-octeon-di is NEW. binary:cdrom-core-modules-4.9.0-18-powerpc64le-di is NEW. binary:crc-modules-4.9.0-18-4kc-malta-di is NEW. binary:crc-modules-4.9.0-18-5kc-malta-di is NEW. binary:crc-modules-4.9.0-18-686-di is NEW. binary:crc-modules-4.9.0-18-686-pae-di is NEW. binary:crc-modules-4.9.0-18-amd64-di is NEW. binary:crc-modules-4.9.0-18-arm64-di is NEW. binary:crc-modules-4.9.0-18-armmp-di is NEW. binary:crc-modules-4.9.0-18-loongson-3-di is NEW. binary:crc-modules-4.9.0-18-marvell-di is NEW. binary:crc-modules-4.9.0-18-octeon-di is NEW. binary:crc-modules-4.9.0-18-powerpc64le-di is NEW. binary:crc-modules-4.9.0-18-s390x-di is NEW. binary:crypto-dm-modules-4.9.0-18-4kc-malta-di is NEW. binary:crypto-dm-modules-4.9.0-18-5kc-malta-di is NEW. binary:crypto-dm-modules-4.9.0-18-686-di is NEW. binary:crypto-dm-modules-4.9.0-18-686-pae-di is NEW. binary:crypto-dm-modules-4.9.0-18-amd64-di is NEW. binary:crypto-dm-modules-4.9.0-18-arm64-di is NEW. binary:crypto-dm-modules-4.9.0-18-armmp-di is NEW. binary:crypto-dm-modules-4.9.0-18-loongson-3-di is NEW. binary:crypto-dm-modules-4.9.0-18-marvell-di is NEW. binary:crypto-dm-modules-4.9.0-18-octeon-di is NEW. binary:crypto-dm-modules-4.9.0-18-powerpc64le-di is NEW. binary:crypto-dm-modules-4.9.0-18-s390x-di is NEW. binary:crypto-modules-4.9.0-18-4kc-malta-di is NEW. binary:crypto-modules-4.9.0-18-5kc-malta-di is NEW. binary:crypto-modules-4.9.0-18-686-di is NEW. binary:crypto-modules-4.9.0-18-686-pae-di is NEW. binary:crypto-modules-4.9.0-18-amd64-di is NEW. binary:crypto-modules-4.9.0-18-arm64-di is NEW. binary:crypto-modules-4.9.0-18-armmp-di is NEW. binary:crypto-modules-4.9.0-18-loongson-3-di is NEW. binary:crypto-modules-4.9.0-18-marvell-di is NEW. binary:crypto-modules-4.9.0-18-octeon-di is NEW. binary:crypto-modules-4.9.0-18-powerpc64le-di is NEW. binary:crypto-modules-4.9.0-18-s390x-di is NEW. binary:dasd-extra-modules-4.9.0-18-s390x-di is NEW. binary:dasd-modules-4.9.0-18-s390x-di is NEW. binary:efi-modules-4.9.0-18-686-di is NEW. binary:efi-modules-4.9.0-18-686-pae-di is NEW. binary:efi-modules-4.9.0-18-amd64-di is NEW. binary:efi-modules-4.9.0-18-arm64-di is NEW. binary:efi-modules-4.9.0-18-armmp-di is NEW. binary:event-modules-4.9.0-18-4kc-malta-di is NEW. binary:event-modules-4.9.0-18-5kc-malta-di is NEW. binary:event-modules-4.9.0-18-686-di is NEW. binary:event-modules-4.9.0-18-686-pae-di is NEW. binary:event-modules-4.9.0-18-amd64-di is NEW. binary:event-modules-4.9.0-18-arm64-di is NEW. binary:event-modules-4.9.0-18-armmp-di is NEW. binary:event-modules-4.9.0-18-loongson-3-di is NEW. binary:event-modules-4.9.0-18-marvell-di is NEW. binary:event-modules-4.9.0-18-octeon-di is NEW. binary:event-modules-4.9.0-18-powerpc64le-di is NEW. binary:ext4-modules-4.9.0-18-4kc-malta-di is NEW. binary:ext4-modules-4.9.0-18-5kc-malta-di is NEW. binary:ext4-modules-4.9.0-18-686-di is NEW. binary:ext4-modules-4.9.0-18-686-pae-di is NEW. binary:ext4-modules-4.9.0-18-amd64-di is NEW. binary:ext4-modules-4.9.0-18-arm64-di is NEW.
linux_5.16.12-1_source.changes ACCEPTED into unstable, unstable
Accepted: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Tue, 08 Mar 2022 18:47:04 +0100 Source: linux Architecture: source Version: 5.16.12-1 Distribution: unstable Urgency: high Maintainer: Debian Kernel Team Changed-By: Salvatore Bonaccorso Closes: 1006490 Changes: linux (5.16.12-1) unstable; urgency=high . * New upstream stable update: https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.16.12 - mm/filemap: Fix handling of THPs in generic_file_buffered_read() - cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug - btrfs: tree-checker: check item_size for inode_item - btrfs: tree-checker: check item_size for dev_item - slab: remove __alloc_size attribute from __kmalloc_track_caller - io_uring: don't convert to jiffies for waiting on timeouts - io_uring: disallow modification of rsrc_data during quiesce - selinux: fix misuse of mutex_is_locked() - vhost/vsock: don't check owner in vhost_vsock_stop() while releasing - [x86] KVM: x86/mmu: make apf token non-zero to fix bug - [x86] KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled - drm/amd: Check if ASPM is enabled from PCIe subsystem - drm/amdgpu: disable MMHUB PG for Picasso - drm/amdgpu: do not enable asic reset for raven2 - [x86] drm/i915: Widen the QGV point mask - [x86] drm/i915: Disconnect PHYs left connected by BIOS on disabled ports - [x86] drm/i915: Correctly populate use_sagv_wm for all pipes - [x86] drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV - sr9700: sanity check for packet length - USB: zaurus: support another broken Zaurus - CDC-NCM: avoid overflow in sanity checking - ping: remove pr_err from ping_lookup - Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC" - [arm64,armhf] gpu: host1x: Always return syncpoint value when waiting - perf data: Fix double free in perf_session__delete() - mptcp: fix race in incoming ADD_ADDR option processing - mptcp: add mibs counter for ignored incoming options - bnx2x: fix driver load from initrd - bnxt_en: Fix devlink fw_activate - bnxt_en: Fix active FEC reporting to ethtool - bnxt_en: Fix offline ethtool selftest with RDMA enabled - bnxt_en: Fix occasional ethtool -t loopback test failures - bnxt_en: Fix incorrect multicast rx mask setting when not requested - bnxt_en: Restore the resets_reliable flag in bnxt_open() - hwmon: Handle failure to register sensor with thermal zone correctly - net/mlx5: Fix tc max supported prio for nic mode - ice: fix setting l4 port flag when adding filter - ice: fix concurrent reset and removal of VFs - ice: check the return of ice_ptp_gettimex64 - ice: initialize local variable 'tlv' - net/mlx5: Update the list of the PCI supported devices - bpf: Fix crash due to incorrect copy_map_value - bpf: Do not try bpf_msg_push_data with len 0 - bpf: Fix a bpf_timer initialization issue - bpf: Add schedule points in batch ops - io_uring: add a schedule point in io_add_buffers() - net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends - nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info - tipc: Fix end of loop tests for list_for_each_entry() - gso: do not skip outer ip header in case of ipip and net_failover - [armel,armhf] net: mv643xx_eth: process retval from of_get_mac_address - openvswitch: Fix setting ipv6 fields causing hw csum failure - drm/edid: Always set RGB444 - net/mlx5e: Fix wrong return value on ioctl EEPROM query failure - net/mlx5e: TC, Reject rules with forward and drop actions - net/mlx5e: TC, Reject rules with drop and modify hdr action - block: clear iocb->private in blkdev_bio_end_io_async() - [arm*] drm/vc4: crtc: Fix runtime_pm reference counting - [x86] drm/i915/dg2: Print PHY name properly on calibration error - drm/amd/display: For vblank_disable_immediate, check PSR is really used - net/sched: act_ct: Fix flow table lookup after ct clear or switching zones - net: Force inlining of checksum functions in net/checksum.h - netfilter: nf_tables: unregister flowtable hooks on netns exit - [arm64,armhf] net: dsa: avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held - nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() - netfilter: nf_tables: fix memory leak during stateful obj update - net/smc: Use a mutex for locking "struct smc_pnettable" - [x86] surface: surface3_power: Fix battery readings on batteries without a serial number - udp_tunnel: Fix end of loop test in udp_tunnel_nic_unregister() - net/mlx5: DR, Cache STE shadow memory - net/mlx5: DR, Don't allow match on IP
Bug#1006490: marked as done (linux-image-5.16.0-1-amd64: hid-playstation.ko is missing)
Your message dated Tue, 08 Mar 2022 19:00:08 + with message-id and subject line Bug#1006490: fixed in linux 5.16.12-1 has caused the Debian Bug report #1006490, regarding linux-image-5.16.0-1-amd64: hid-playstation.ko is missing to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 1006490: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1006490 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: src:linux Version: 5.16.7-2 Severity: normal X-Debbugs-Cc: a...@dwimlabs.net Dear Maintainer, On linux-image-5.15.0-3-amd64 there's a hid-playstation.ko module that supports DualSense (PS5) controller, but it's missing from linux-image-5.16.0-1-amd64: # dpkg -L linux-image-5.15.0-3-amd64 | fgrep hid-playstation /lib/modules/5.15.0-3-amd64/kernel/drivers/hid/hid-playstation.ko # dpkg -L linux-image-5.16.0-1-amd64 | fgrep hid-playstation (Also missing from linux-image-5.16.0-2-amd64.) Because of this, a different driver is used for the controller (I assume it's hid-generic), and so accelerometer/gyro and touchpad are not supported, and the buttons/axes are in a strange order. After looking at #1006275 and the patch that fixed it, I found that the older kernel config file also used to contain CONFIG_HID_PLAYSTATION=m and CONFIG_PLAYSTATION_FF=y. Please consider re-enabling these options too. -- Package-specific info: ** Version: Linux version 5.16.0-1-amd64 (debian-kernel@lists.debian.org) (gcc-11 (Debian 11.2.0-16) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37.90.20220130) #1 SMP PREEMPT Debian 5.16.7-2 (2022-02-09) ** Command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0-1-amd64 root=UUID=ca3e0e88-3073-4e58-9407-e5ae900dfa83 ro security=apparmor quiet ** Tainted: OE (12288) * externally-built ("out-of-tree") module was loaded * unsigned module was loaded ** Kernel log: [ 17.040596] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 17.050604] vboxdrv: Found 4 processor cores [ 17.077985] vboxdrv: TSC mode is Invariant, tentative frequency 238412 Hz [ 17.077990] vboxdrv: Successfully loaded version 6.1.32_Debian r149290 (interface 0x0032) [ 17.101018] VBoxNetFlt: Successfully started. [ 17.127304] VBoxNetAdp: Successfully started. [ 17.134334] tun: Universal TUN/TAP device driver, 1.6 [ 17.253155] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.253160] Bluetooth: BNEP filters: protocol multicast [ 17.253165] Bluetooth: BNEP socket layer initialized [ 17.272242] NET: Registered PF_ALG protocol family [ 17.322653] pcieport :00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 17.356449] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=600. Quota mode: none. [ 17.369267] EXT4-fs (dm-0): re-mounted. Opts: commit=600. Quota mode: none. [ 17.403017] r8169 :01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw [ 17.430599] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) [ 17.631941] r8169 :01:00.0 enp1s0: Link is Down [ 17.647885] Bluetooth: hci0: Failed to read codec capabilities (-56) [ 17.648881] Bluetooth: hci0: Failed to read codec capabilities (-56) [ 17.649882] Bluetooth: hci0: Failed to read codec capabilities (-56) [ 17.650887] Bluetooth: hci0: Failed to read codec capabilities (-56) [ 17.651882] Bluetooth: hci0: Failed to read codec capabilities (-56) [ 17.652928] Bluetooth: hci0: Failed to read codec capabilities (-56) [ 22.655952] fuse: init (API version 7.35) [ 24.640215] Bluetooth: RFCOMM TTY layer initialized [ 24.640224] Bluetooth: RFCOMM socket layer initialized [ 24.640233] Bluetooth: RFCOMM ver 1.11 [ 30.717021] wlp2s0: authenticate with 74:a7:8e:cd:c9:e4 [ 30.725610] wlp2s0: send auth to 74:a7:8e:cd:c9:e4 (try 1/3) [ 30.754475] wlp2s0: authenticated [ 30.758659] wlp2s0: associate with 74:a7:8e:cd:c9:e4 (try 1/3) [ 30.774574] wlp2s0: RX AssocResp from 74:a7:8e:cd:c9:e4 (capab=0x431 status=0 aid=1) [ 30.791376] wlp2s0: associated [ 30.899457] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 34.999034] [UFW BLOCK] IN=wlp2s0 OUT= MAC=d0:3c:1f:74:e3:2a:74:a7:8e:cd:c9:e4:08:00 SRC=185.52.2.217 DST=192.168.0.5 LEN=68 TOS=0x10 PREC=0x60 TTL=58 ID=15233 DF PROTO=UDP SPT=1194 DPT=59041 LEN=48 [ 78.233727] usb 1-2: new high-speed USB device number 4 using xhci_hcd [ 78.382675] usb 1-2: New USB device found, idVendor=054c, idProduct=0ce6, bcdDevice= 1.00 [ 78.382688] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [
linux_5.16.12-1_source.changes is NEW
binary:affs-modules-5.16.0-4-4kc-malta-di is NEW. binary:affs-modules-5.16.0-4-5kc-malta-di is NEW. binary:affs-modules-5.16.0-4-loongson-3-di is NEW. binary:affs-modules-5.16.0-4-mips32r2el-di is NEW. binary:affs-modules-5.16.0-4-mips64r2el-di is NEW. binary:affs-modules-5.16.0-4-octeon-di is NEW. binary:ata-modules-5.16.0-4-4kc-malta-di is NEW. binary:ata-modules-5.16.0-4-5kc-malta-di is NEW. binary:ata-modules-5.16.0-4-armmp-di is NEW. binary:ata-modules-5.16.0-4-loongson-3-di is NEW. binary:ata-modules-5.16.0-4-mips32r2el-di is NEW. binary:ata-modules-5.16.0-4-mips64r2el-di is NEW. binary:ata-modules-5.16.0-4-octeon-di is NEW. binary:ata-modules-5.16.0-4-powerpc64le-di is NEW. binary:btrfs-modules-5.16.0-4-4kc-malta-di is NEW. binary:btrfs-modules-5.16.0-4-5kc-malta-di is NEW. binary:btrfs-modules-5.16.0-4-armmp-di is NEW. binary:btrfs-modules-5.16.0-4-loongson-3-di is NEW. binary:btrfs-modules-5.16.0-4-marvell-di is NEW. binary:btrfs-modules-5.16.0-4-mips32r2el-di is NEW. binary:btrfs-modules-5.16.0-4-mips64r2el-di is NEW. binary:btrfs-modules-5.16.0-4-octeon-di is NEW. binary:btrfs-modules-5.16.0-4-powerpc64le-di is NEW. binary:btrfs-modules-5.16.0-4-s390x-di is NEW. binary:cdrom-core-modules-5.16.0-4-4kc-malta-di is NEW. binary:cdrom-core-modules-5.16.0-4-5kc-malta-di is NEW. binary:cdrom-core-modules-5.16.0-4-armmp-di is NEW. binary:cdrom-core-modules-5.16.0-4-loongson-3-di is NEW. binary:cdrom-core-modules-5.16.0-4-marvell-di is NEW. binary:cdrom-core-modules-5.16.0-4-mips32r2el-di is NEW. binary:cdrom-core-modules-5.16.0-4-mips64r2el-di is NEW. binary:cdrom-core-modules-5.16.0-4-octeon-di is NEW. binary:cdrom-core-modules-5.16.0-4-powerpc64le-di is NEW. binary:cdrom-core-modules-5.16.0-4-s390x-di is NEW. binary:crc-modules-5.16.0-4-4kc-malta-di is NEW. binary:crc-modules-5.16.0-4-5kc-malta-di is NEW. binary:crc-modules-5.16.0-4-armmp-di is NEW. binary:crc-modules-5.16.0-4-loongson-3-di is NEW. binary:crc-modules-5.16.0-4-marvell-di is NEW. binary:crc-modules-5.16.0-4-mips32r2el-di is NEW. binary:crc-modules-5.16.0-4-mips64r2el-di is NEW. binary:crc-modules-5.16.0-4-octeon-di is NEW. binary:crc-modules-5.16.0-4-powerpc64le-di is NEW. binary:crc-modules-5.16.0-4-s390x-di is NEW. binary:crypto-dm-modules-5.16.0-4-4kc-malta-di is NEW. binary:crypto-dm-modules-5.16.0-4-5kc-malta-di is NEW. binary:crypto-dm-modules-5.16.0-4-armmp-di is NEW. binary:crypto-dm-modules-5.16.0-4-loongson-3-di is NEW. binary:crypto-dm-modules-5.16.0-4-marvell-di is NEW. binary:crypto-dm-modules-5.16.0-4-mips32r2el-di is NEW. binary:crypto-dm-modules-5.16.0-4-mips64r2el-di is NEW. binary:crypto-dm-modules-5.16.0-4-octeon-di is NEW. binary:crypto-dm-modules-5.16.0-4-powerpc64le-di is NEW. binary:crypto-dm-modules-5.16.0-4-s390x-di is NEW. binary:crypto-modules-5.16.0-4-4kc-malta-di is NEW. binary:crypto-modules-5.16.0-4-5kc-malta-di is NEW. binary:crypto-modules-5.16.0-4-armmp-di is NEW. binary:crypto-modules-5.16.0-4-loongson-3-di is NEW. binary:crypto-modules-5.16.0-4-marvell-di is NEW. binary:crypto-modules-5.16.0-4-mips32r2el-di is NEW. binary:crypto-modules-5.16.0-4-mips64r2el-di is NEW. binary:crypto-modules-5.16.0-4-octeon-di is NEW. binary:crypto-modules-5.16.0-4-powerpc64le-di is NEW. binary:crypto-modules-5.16.0-4-s390x-di is NEW. binary:dasd-extra-modules-5.16.0-4-s390x-di is NEW. binary:dasd-modules-5.16.0-4-s390x-di is NEW. binary:efi-modules-5.16.0-4-armmp-di is NEW. binary:event-modules-5.16.0-4-4kc-malta-di is NEW. binary:event-modules-5.16.0-4-5kc-malta-di is NEW. binary:event-modules-5.16.0-4-armmp-di is NEW. binary:event-modules-5.16.0-4-loongson-3-di is NEW. binary:event-modules-5.16.0-4-marvell-di is NEW. binary:event-modules-5.16.0-4-mips32r2el-di is NEW. binary:event-modules-5.16.0-4-mips64r2el-di is NEW. binary:event-modules-5.16.0-4-octeon-di is NEW. binary:event-modules-5.16.0-4-powerpc64le-di is NEW. binary:ext4-modules-5.16.0-4-4kc-malta-di is NEW. binary:ext4-modules-5.16.0-4-5kc-malta-di is NEW. binary:ext4-modules-5.16.0-4-armmp-di is NEW. binary:ext4-modules-5.16.0-4-loongson-3-di is NEW. binary:ext4-modules-5.16.0-4-marvell-di is NEW. binary:ext4-modules-5.16.0-4-mips32r2el-di is NEW. binary:ext4-modules-5.16.0-4-mips64r2el-di is NEW. binary:ext4-modules-5.16.0-4-octeon-di is NEW. binary:ext4-modules-5.16.0-4-powerpc64le-di is NEW. binary:ext4-modules-5.16.0-4-s390x-di is NEW. binary:f2fs-modules-5.16.0-4-4kc-malta-di is NEW. binary:f2fs-modules-5.16.0-4-5kc-malta-di is NEW. binary:f2fs-modules-5.16.0-4-armmp-di is NEW. binary:f2fs-modules-5.16.0-4-loongson-3-di is NEW. binary:f2fs-modules-5.16.0-4-marvell-di is NEW. binary:f2fs-modules-5.16.0-4-mips32r2el-di is NEW. binary:f2fs-modules-5.16.0-4-mips64r2el-di is NEW. binary:f2fs-modules-5.16.0-4-octeon-di is NEW. binary:f2fs-modules-5.16.0-4-powerpc64le-di is NEW. binary:f2fs-modules-5.16.0-4-s390x-di is NEW. binary:fancontrol-modules-5.16.0-4-powerpc64le-di is NEW. binary:fat-modules-5.16.0-4-4kc-malta-di is NEW.
Processing of linux_5.16.12-1_source.changes
linux_5.16.12-1_source.changes uploaded successfully to localhost along with the files: linux_5.16.12-1.dsc linux_5.16.12.orig.tar.xz linux_5.16.12-1.debian.tar.xz linux_5.16.12-1_source.buildinfo Greetings, Your Debian queue daemon (running on host usper.debian.org)
linux-signed-i386_5.16.11+1~bpo11+1_source.changes is NEW
binary:acpi-modules-5.16.0-0.bpo.3-686-di is NEW. binary:acpi-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:ata-modules-5.16.0-0.bpo.3-686-di is NEW. binary:ata-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.3-686-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.3-686-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:crc-modules-5.16.0-0.bpo.3-686-di is NEW. binary:crc-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.3-686-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:crypto-modules-5.16.0-0.bpo.3-686-di is NEW. binary:crypto-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:efi-modules-5.16.0-0.bpo.3-686-di is NEW. binary:efi-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:event-modules-5.16.0-0.bpo.3-686-di is NEW. binary:event-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:ext4-modules-5.16.0-0.bpo.3-686-di is NEW. binary:ext4-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:f2fs-modules-5.16.0-0.bpo.3-686-di is NEW. binary:f2fs-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:fat-modules-5.16.0-0.bpo.3-686-di is NEW. binary:fat-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:fb-modules-5.16.0-0.bpo.3-686-di is NEW. binary:fb-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:firewire-core-modules-5.16.0-0.bpo.3-686-di is NEW. binary:firewire-core-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:fuse-modules-5.16.0-0.bpo.3-686-di is NEW. binary:fuse-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:i2c-modules-5.16.0-0.bpo.3-686-di is NEW. binary:i2c-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:input-modules-5.16.0-0.bpo.3-686-di is NEW. binary:input-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:isofs-modules-5.16.0-0.bpo.3-686-di is NEW. binary:isofs-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:jfs-modules-5.16.0-0.bpo.3-686-di is NEW. binary:jfs-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:kernel-image-5.16.0-0.bpo.3-686-di is NEW. binary:kernel-image-5.16.0-0.bpo.3-686-pae-di is NEW. binary:linux-image-5.16.0-0.bpo.3-686 is NEW. binary:linux-image-5.16.0-0.bpo.3-686-pae is NEW. binary:linux-image-5.16.0-0.bpo.3-rt-686-pae is NEW. binary:loop-modules-5.16.0-0.bpo.3-686-di is NEW. binary:loop-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:md-modules-5.16.0-0.bpo.3-686-di is NEW. binary:md-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:mmc-core-modules-5.16.0-0.bpo.3-686-di is NEW. binary:mmc-core-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:mmc-modules-5.16.0-0.bpo.3-686-di is NEW. binary:mmc-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:mouse-modules-5.16.0-0.bpo.3-686-di is NEW. binary:mouse-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:mtd-core-modules-5.16.0-0.bpo.3-686-di is NEW. binary:mtd-core-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:multipath-modules-5.16.0-0.bpo.3-686-di is NEW. binary:multipath-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:nbd-modules-5.16.0-0.bpo.3-686-di is NEW. binary:nbd-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:nic-modules-5.16.0-0.bpo.3-686-di is NEW. binary:nic-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:nic-pcmcia-modules-5.16.0-0.bpo.3-686-di is NEW. binary:nic-pcmcia-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:nic-shared-modules-5.16.0-0.bpo.3-686-di is NEW. binary:nic-shared-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:nic-usb-modules-5.16.0-0.bpo.3-686-di is NEW. binary:nic-usb-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:nic-wireless-modules-5.16.0-0.bpo.3-686-di is NEW. binary:nic-wireless-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:pata-modules-5.16.0-0.bpo.3-686-di is NEW. binary:pata-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:pcmcia-modules-5.16.0-0.bpo.3-686-di is NEW. binary:pcmcia-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:pcmcia-storage-modules-5.16.0-0.bpo.3-686-di is NEW. binary:pcmcia-storage-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:ppp-modules-5.16.0-0.bpo.3-686-di is NEW. binary:ppp-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:rfkill-modules-5.16.0-0.bpo.3-686-di is NEW. binary:rfkill-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:sata-modules-5.16.0-0.bpo.3-686-di is NEW. binary:sata-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:scsi-core-modules-5.16.0-0.bpo.3-686-di is NEW. binary:scsi-core-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:scsi-modules-5.16.0-0.bpo.3-686-di is NEW. binary:scsi-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:scsi-nic-modules-5.16.0-0.bpo.3-686-di is NEW. binary:scsi-nic-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:serial-modules-5.16.0-0.bpo.3-686-di is NEW. binary:serial-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:sound-modules-5.16.0-0.bpo.3-686-di is NEW. binary:sound-modules-5.16.0-0.bpo.3-686-pae-di is NEW. binary:speakup-modules-5.16.0-0.bpo.3-686-di is NEW. binary:speakup-modules-5.16.0-0.bpo.3-686-pae-di is NEW.
Processing of linux-signed-i386_5.16.11+1~bpo11+1_source.changes
linux-signed-i386_5.16.11+1~bpo11+1_source.changes uploaded successfully to localhost along with the files: linux-signed-i386_5.16.11+1~bpo11+1.dsc linux-signed-i386_5.16.11+1~bpo11+1.tar.xz Greetings, Your Debian queue daemon (running on host usper.debian.org)
linux-signed-arm64_5.16.11+1~bpo11+1_source.changes is NEW
binary:ata-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:crc-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:crypto-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:efi-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:event-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:ext4-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:f2fs-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:fat-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:fb-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:fuse-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:i2c-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:input-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:isofs-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:jfs-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:kernel-image-5.16.0-0.bpo.3-arm64-di is NEW. binary:leds-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:linux-image-5.16.0-0.bpo.3-arm64 is NEW. binary:linux-image-5.16.0-0.bpo.3-cloud-arm64 is NEW. binary:linux-image-5.16.0-0.bpo.3-rt-arm64 is NEW. binary:loop-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:md-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:mmc-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:mtd-core-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:multipath-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:nbd-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:nic-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:nic-shared-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:nic-usb-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:nic-wireless-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:ppp-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:sata-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:scsi-core-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:scsi-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:scsi-nic-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:squashfs-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:udf-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:uinput-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:usb-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:usb-serial-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:usb-storage-modules-5.16.0-0.bpo.3-arm64-di is NEW. binary:xfs-modules-5.16.0-0.bpo.3-arm64-di is NEW. Your package has been put into the NEW queue, which requires manual action from the ftpteam to process. The upload was otherwise valid (it had a good OpenPGP signature and file hashes are valid), so please be patient. Packages are routinely processed through to the archive, and do feel free to browse the NEW queue[1]. If there is an issue with the upload, you will receive an email from a member of the ftpteam. If you have any questions, you may reply to this email. [1]: https://ftp-master.debian.org/new.html or https://ftp-master.debian.org/backports-new.html for *-backports
Re: CVE-2022-0847 "Dirty pipe" kernel vulnerability mitigation in buster-backports?
On Tue, 2022-03-08 at 14:21 +0100, Mayeul Cantan wrote: > Hello, and thank you for your work on Debian and backports. > > I was checking if my buster install was vunerable to CVE-2022-0847 (aka > "Dirty pipe"). > > I use a kernel from buster-backports due to hardware constraints. The > latest available version is 5.10.92 [1]. The vulnerability was fixed in > 5.10.102 [2]. I am assuming the current kernel is vulnerable? [...] The fix was included in Debian version 5.10.92-2. I'll update the version in buster-backports shortly. Ben. -- Ben Hutchings - Debian developer, member of kernel, installer and LTS teams signature.asc Description: This is a digitally signed message part
Processing of linux-signed-arm64_5.16.11+1~bpo11+1_source.changes
linux-signed-arm64_5.16.11+1~bpo11+1_source.changes uploaded successfully to localhost along with the files: linux-signed-arm64_5.16.11+1~bpo11+1.dsc linux-signed-arm64_5.16.11+1~bpo11+1.tar.xz Greetings, Your Debian queue daemon (running on host usper.debian.org)
Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
Hi Damien, Damien Le Moal wrote: > > Damien Le Moal wrote: > >> In the bug report, I did not see a dmesg output for a failed boot. But I > >> guess it is because the user cannot capture it. > > > > Correct. > > Could you try taking a video of the boot messages ? Did that now. https://noone.org/debian/Bug-Reports/1006149/DSCN5255.MOV (82 MB, no debugging yet) Note that this is from an IBM ThinkPad A31 (https://www.thinkwiki.org/wiki/Category:A31), not from a ThinkPad T41 as with the original bug reporter, i.e. it's even a bit older. > However, since things are working with 5.15, I would like to > understand what is going on and which part of the device scan is > failing. For that, booting with logging_level=7 (debug) and having > the kernel messages would help. Ok, did another one, this time with "debug loglevel=7" added on the kernel commandline by editing it in GRUB: https://noone.org/debian/Bug-Reports/1006149/DSCN5259.MOV (94 MB, with debugging) HTH. (Sorry for all that zooming out at the beginning of the videos. For some reason my digital camera doesn't seem to use the same zoom setting or maybe resolution for videos as the one it uses for pictures (and hence also for the preview before starting the recording). Regards, Axel -- ,''`. | Axel Beckert , https://people.debian.org/~abe/ : :' : | Debian Developer, ftp.ch.debian.org Admin `. `' | 4096R: 2517 B724 C5F6 CA99 5329 6E61 2FF9 CD59 6126 16B5 `-| 1024D: F067 EA27 26B9 C3FC 1486 202E C09E 1D89 9593 0EDE
CVE-2022-0847 "Dirty pipe" kernel vulnerability mitigation in buster-backports?
Hello, and thank you for your work on Debian and backports. I was checking if my buster install was vunerable to CVE-2022-0847 (aka "Dirty pipe"). I use a kernel from buster-backports due to hardware constraints. The latest available version is 5.10.92 [1]. The vulnerability was fixed in 5.10.102 [2]. I am assuming the current kernel is vulnerable? I quickly checked various Debian mailing lists and bugtrackers, but couldn't find a trace of that issue. Some of my users have unprivileged shell access to that server. I would appreciate an updated kernel image, given the severity of the issue. For context, [3] is the initial public report of the vulnerability. Thank you in advance. Have a good day, Mayeul [1]: https://packages.debian.org/buster-backports/kernel-image-5.10.0-0.bpo.11-amd64-di [2]: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.102 commit b19ec7afa9297d862ed86443e0164643b97250ab [3]: https://dirtypipe.cm4all.com/
linux-signed-amd64_5.16.11+1~bpo11+1_source.changes is NEW
binary:acpi-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:ata-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:btrfs-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:cdrom-core-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:crc-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:crypto-dm-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:crypto-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:efi-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:event-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:ext4-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:f2fs-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:fat-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:fb-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:firewire-core-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:fuse-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:i2c-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:input-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:isofs-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:jfs-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:kernel-image-5.16.0-0.bpo.3-amd64-di is NEW. binary:linux-image-5.16.0-0.bpo.3-amd64 is NEW. binary:linux-image-5.16.0-0.bpo.3-cloud-amd64 is NEW. binary:linux-image-5.16.0-0.bpo.3-rt-amd64 is NEW. binary:loop-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:md-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:mmc-core-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:mmc-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:mouse-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:mtd-core-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:multipath-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:nbd-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:nic-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:nic-pcmcia-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:nic-shared-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:nic-usb-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:nic-wireless-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:pata-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:pcmcia-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:pcmcia-storage-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:ppp-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:rfkill-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:sata-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:scsi-core-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:scsi-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:scsi-nic-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:serial-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:sound-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:speakup-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:squashfs-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:udf-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:uinput-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:usb-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:usb-serial-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:usb-storage-modules-5.16.0-0.bpo.3-amd64-di is NEW. binary:xfs-modules-5.16.0-0.bpo.3-amd64-di is NEW. Your package has been put into the NEW queue, which requires manual action from the ftpteam to process. The upload was otherwise valid (it had a good OpenPGP signature and file hashes are valid), so please be patient. Packages are routinely processed through to the archive, and do feel free to browse the NEW queue[1]. If there is an issue with the upload, you will receive an email from a member of the ftpteam. If you have any questions, you may reply to this email. [1]: https://ftp-master.debian.org/new.html or https://ftp-master.debian.org/backports-new.html for *-backports
Processing of linux-signed-amd64_5.16.11+1~bpo11+1_source.changes
linux-signed-amd64_5.16.11+1~bpo11+1_source.changes uploaded successfully to localhost along with the files: linux-signed-amd64_5.16.11+1~bpo11+1.dsc linux-signed-amd64_5.16.11+1~bpo11+1.tar.xz Greetings, Your Debian queue daemon (running on host usper.debian.org)
Re: Problem: USB Ethernet PCI-E card does not work with kernel 5.10.0-11-amd64
Flacusbigotis writes: > The kernel logs indicating issues in Bullseye include a warning of a "host > failure" by xhci_hcd, and several write/read errors by the ax88179 ethernet > driver/module for the card, as follows: > > Feb 22 17:22:53 server1 kernel: [1.380198] xhci_hcd :1c:00.0: xHCI > Host Controller > Feb 22 17:22:53 server1 kernel: [1.380205] xhci_hcd :1c:00.0: new > USB bus registered, assigned bus number 5 > Feb 22 17:22:53 server1 kernel: [1.380209] xhci_hcd :1c:00.0: Host > supports USB 3.0 SuperSpeed > Feb 22 17:22:53 server1 kernel: [1.380260] usb usb5: New USB device > found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 > Feb 22 17:22:53 server1 kernel: [1.380261] usb usb5: New USB device > strings: Mfr=3, Product=2, SerialNumber=1 > Feb 22 17:22:53 server1 kernel: [1.380263] usb usb5: Product: xHCI Host > Controller > Feb 22 17:22:53 server1 kernel: [1.380264] usb usb5: Manufacturer: > Linux 5.10.0-11-amd64 xhci-hcd > Feb 22 17:22:53 server1 kernel: [1.380265] usb usb5: SerialNumber: > :1c:00.0 > Feb 22 17:22:53 server1 kernel: [1.380396] hub 5-0:1.0: USB hub found > Feb 22 17:22:53 server1 kernel: [1.380411] hub 5-0:1.0: 4 ports detected > Feb 22 17:22:53 server1 kernel: [5.508457] ax88179_178a 5-1:1.0 eth0: > register 'ax88179_178a' at usb-:1c:00.0-1, ASIX AX88179 USB 3.0 Gigabit > Ethernet, 00:11:22:33:44:55 > Feb 22 17:23:25 server1 kernel: [ 39.576966] xhci_hcd :1c:00.0: > WARNING: Host System Error > Feb 22 17:26:00 server1 kernel: [ 194.596335] ax88179_178a 5-1:1.0 > enx001122334455: Failed to read reg index 0x0002: -22 I am guessing that the random mac address is a symptom caused by a failure to read the permanent mac from the USB ethernet controller. Which again probably is caused by one or more of these read errors. But I believe those are only symptoms, and that the real error is that unspecified "Host System Error". I wonder is this could be related to some of the quirks that have been added for this xhci controller since v4.19? There have been a few since the VL805 is used in the RPi4. Some of these might very well be misunderstood and RPI related only. There is also an odd code path in drivers/usb/host/pci-quirks.c where we select a different path on RPi than on other systems because "things are taken care of by the board's co-processor". I find that very suspiscious. And I must admit that my interest in this bug is because I'm worried that the quirk I recently pushed could have unexpected side effects... I have no clue. but the most likely cause is some power managenment issue. Test disabling ASPM e.g. by adding pcie_aspm=off to the kernel command line. Or disabling USB autosuspend, e.g by adding usbcore.autosuspend=-1 to the kernel command line. I do NOT suggest that you run with those settings by default. Only testing to try to narrow down the problem. It would also be intersting to know if removing the XHCI_LPM_SUPPORT quirk would make a difference, since this was added to the VL805 between v4.19 and v5.10 without anyone really knowing if it works.. But I can't figure out how to disable a device specific quirk like that without patching the kernel. Anyone? Bjørn