At 09:11 6/02/08, Mikko Rapeli wrote:
(cc'ing linux-ide)
On Mon, Feb 04, 2008 at 02:32:59AM +0100, Bart Champagne wrote:
Just found another type of Seagate drives that shows this behaviour :
ST310211A
Can this one be blacklisted as well ?
Yes, do you have a patch? And a dmesg dump of the drive in use with and
without a patch?
If you do, please send them to upstream [EMAIL PROTECTED] and hope
that the fix gets applied to Debian kernels too. Also, please test the
sata/pata driver with your drive and add a blacklist there too.
Hi,
Backporting the fix for 2.6.23 to the Debian 2.6.18 kernel hasn't
succeeded yet, my C has gone very rusty it seems.
In attachment a dmesg log for this drive. When/if I get a working
patch I'll let you know.
Regards,
Bart
Linux version 2.6.18-6-486 (Debian 2.6.18.dfsg.1-17etch1) ([EMAIL PROTECTED])
(gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Wed Jan 23
02:46:42 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: - 0009fc00 (usable)
BIOS-e820: 0009fc00 - 000a (reserved)
BIOS-e820: 000ea400 - 0010 (reserved)
BIOS-e820: 0010 - 0400 (usable)
BIOS-e820: fffea400 - 0001 (reserved)
64MB LOWMEM available.
DMI 2.1 present.
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 1000 (gap: 0400:fbfea400)
Detected 233.045 MHz processor.
Built 1 zonelists. Total pages: 16384
Kernel command line: BOOT_IMAGE=linux ro root=301 console=ttyS0,115200
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 57664k/65536k available (1499k kernel code, 7424k reserved, 599k data,
256k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 466.61 BogoMIPS (lpj=933239)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
Compat vDSO mapped to e000.
CPU: AMD-K6tm w/ multimedia extensions stepping 02
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 4239k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfda0a, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7960
PnPBIOS: PnP BIOS version 1.0, entry 0xf:0xab83, dseg 0xf
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX/ICH [8086/7000] at :00:07.0
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1202352982.376:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 256k freed
Loading, please wait...
input: AT Translated Set 2 keyboard as /class/input/input0
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
FATAL: Error inserting fan
(/lib/modules/2.6.18-6-486/kernel/drivers/acpi/fan.ko): No such device
FATAL: Error inserting thermal
(/lib
