Bug#990662: firmware-misc-nonfree: confirmation
Package: firmware-misc-nonfree Version: 20210315-3 Followup-For: Bug #990662 Hello, a confirmation of this bug # dmesg | grep -i nouv [2.688397] nouveau :01:00.0: vgaarb: deactivate vga console [2.690019] nouveau :01:00.0: NVIDIA G98 (298580a2) [2.725486] nouveau :01:00.0: bios: version 62.98.73.00.04 [2.745965] nouveau :01:00.0: fb: 256 MiB GDDR3 [2.825306] nouveau :01:00.0: DRM: VRAM: 256 MiB [2.825307] nouveau :01:00.0: DRM: GART: 1048576 MiB [2.825311] nouveau :01:00.0: DRM: TMDS table version 2.0 [2.825315] nouveau :01:00.0: DRM: DCB version 4.0 [2.825317] nouveau :01:00.0: DRM: DCB outp 00: 01000323 00010034 [2.825320] nouveau :01:00.0: DRM: DCB outp 01: 02011300 0028 [2.825324] nouveau :01:00.0: DRM: DCB outp 02: 02022386 0f200010 [2.825325] nouveau :01:00.0: DRM: DCB outp 03: 02022332 00020010 [2.825328] nouveau :01:00.0: DRM: DCB outp 04: 040333a6 0f200010 [2.825329] nouveau :01:00.0: DRM: DCB outp 05: 04033312 00020010 [2.825332] nouveau :01:00.0: DRM: DCB conn 00: 0040 [2.825334] nouveau :01:00.0: DRM: DCB conn 01: 0100 [2.825337] nouveau :01:00.0: DRM: DCB conn 02: 5246 [2.825338] nouveau :01:00.0: DRM: DCB conn 03: a346 [2.830444] nouveau :01:00.0: DRM: MM: using M2MF for buffer copies [2.921951] nouveau :01:00.0: DRM: allocated 1920x1200 fb: 0x5, bo 5b258a42 [2.922019] fbcon: nouveaudrmfb (fb0) is primary device [4.248388] nouveau :01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [4.268803] [drm] Initialized nouveau 1.3.1 20120801 for :01:00.0 on minor 0 [ 53.775327] nouveau :01:00.0: firmware: failed to load nouveau/nv98_fuc084 (-2) [ 53.775333] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 53.775345] nouveau :01:00.0: firmware: failed to load nouveau/nv98_fuc084d (-2) [ 53.775347] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 53.775349] nouveau :01:00.0: msvld: unable to load firmware data [ 53.775351] nouveau :01:00.0: msvld: init failed, -19 [ 72.661417] nouveau :01:00.0: firmware: failed to load nouveau/nv98_fuc084 (-2) [ 72.661425] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084 failed with error -2 [ 72.661436] nouveau :01:00.0: firmware: failed to load nouveau/nv98_fuc084d (-2) [ 72.661438] nouveau :01:00.0: Direct firmware load for nouveau/nv98_fuc084d failed with error -2 [ 72.661440] nouveau :01:00.0: msvld: unable to load firmware data [ 72.661443] nouveau :01:00.0: msvld: init failed, -19 [ 227.014093] nouveau :01:00.0: fifo: CACHE_ERROR - ch 3 [Xorg[692]] subc 0 mthd 0060 data beef0201 [ 366.102466] nouveau :01:00.0: fifo: CACHE_ERROR - ch 3 [Xorg[692]] subc 3 mthd 1b00 data # lshw -C Display *-display description: VGA compatible controller product: G98M [Quadro NVS 160M] vendor: NVIDIA Corporation physical id: 0 bus info: pci@:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:28 memory:f500-f5ff memory:e000-efff memory:f200-f3ff ioport:df00(size=128) memory:c-d hth, Wim -- System Information: Debian Release: 11.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-9-amd64 (SMP w/2 CPU threads) Locale: LANG=nl_BE.UTF-8, LC_CTYPE=nl_BE.UTF-8 (charmap=UTF-8), LANGUAGE=nl_BE:nl Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled firmware-misc-nonfree depends on no packages. firmware-misc-nonfree recommends no packages. Versions of packages firmware-misc-nonfree suggests: ii initramfs-tools 0.140 -- no debconf information
Bug#980315: linux-headers-5.9.0-0.bpo.5-amd64: BUILD_EXCLUSIVE directory not matching kernel/arch
Package: linux-headers-5.9.0-0.bpo.5-amd64 Version: 5.9.15-1~bpo10+1 Severity: normal Dear Maintainer, after running apt update and apt upgrade, new: linux-headers-5.9.0-0.bpo.5-amd64 linux-headers-5.9.0-0.bpo.5-common linux-image-5.9.0-0.bpo.5-amd64 upgraded: linux-headers-amd64 linux-image-amd64 i get the following error messages (dutch): " .. Instellen van linux-headers-5.9.0-0.bpo.5-amd64 (5.9.15-1~bpo10+1) ... /etc/kernel/header_postinst.d/dkms: Error! The dkms.conf for this module includes a BUILD_EXCLUSIVE directive which does not match this kernel/arch. This indicates that it should not be built. Instellen van linux-image-5.9.0-0.bpo.5-amd64 (5.9.15-1~bpo10+1) ... I: /vmlinuz.old is now a symlink to boot/vmlinuz-5.9.0-0.bpo.2-amd64 I: /initrd.img.old is now a symlink to boot/initrd.img-5.9.0-0.bpo.2-amd64 I: /vmlinuz is now a symlink to boot/vmlinuz-5.9.0-0.bpo.5-amd64 I: /initrd.img is now a symlink to boot/initrd.img-5.9.0-0.bpo.5-amd64 /etc/kernel/postinst.d/dkms: Error! The dkms.conf for this module includes a BUILD_EXCLUSIVE directive which does not match this kernel/arch. This indicates that it should not be built. /etc/kernel/postinst.d/initramfs-tools: update-initramfs: Generating /boot/initrd.img-5.9.0-0.bpo.5-amd64 .. " # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 158 model name : Intel(R) Core(TM) i9-9880H CPU @ 2.30GHz .. HTH, Wim -- System Information: Debian Release: 10.7 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 5.9.0-0.bpo.2-amd64 (SMP w/16 CPU cores) Locale: LANG=nl_BE.UTF-8, LC_CTYPE=nl_BE.UTF-8 (charmap=UTF-8), LANGUAGE=nl_BE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-headers-5.9.0-0.bpo.5-amd64 depends on: ii linux-compiler-gcc-8-x864.19.160-2 ii linux-headers-5.9.0-0.bpo.5-common 5.9.15-1~bpo10+1 ii linux-kbuild-5.95.9.15-1~bpo10+1 linux-headers-5.9.0-0.bpo.5-amd64 recommends no packages. linux-headers-5.9.0-0.bpo.5-amd64 suggests no packages. -- no debconf information
Bug#949369: src:linux: confirmation on hp zbook
Package: src:linux
Followup-For: Bug #949369
Dear Maintainer,
Confirmation of this bug,
it seems to happen at random,
i don't know if it a kernel issue or a nouveau issue
from $grep -n3 chip /var/log/messages
15416-Apr 14 09:15:30 /usr/lib/gdm3/gdm-x-session[3388]: (--) modeset(0): HDMI
max TMDS frequency 225000KHz
15417-Apr 14 09:15:38 kernel: [ 481.351289] i915 :00:02.0: Resetting rcs0
for hang on rcs0
15418-Apr 14 09:15:46 kernel: [ 489.351633] i915 :00:02.0: Resetting rcs0
for hang on rcs0
15419:Apr 14 09:15:46 kernel: [ 489.352390] i915 :00:02.0: Resetting chip
for hang on rcs0
15420-Apr 14 09:15:46 /usr/lib/gdm3/gdm-x-session[3388]: (II) modeset(0): EDID
vendor "DEL", prod id 16505
15421-Apr 14 09:15:46 /usr/lib/gdm3/gdm-x-session[3388]: (II) modeset(0):
Using hsync ranges from config file
15422-Apr 14 09:15:46 /usr/lib/gdm3/gdm-x-session[3388]: (II) modeset(0):
Using vrefresh ranges from config file
# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description:Debian GNU/Linux 10 (buster)
Release:10
Codename: buster
# uname -v
#1 SMP Debian 5.4.19-1~bpo10+1 (2020-03-09)
$ lspci | grep ' VGA ' | cut -d" " -f 1 | xargs -i lspci -v -s {}
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 630 (Mobile)
(rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company UHD Graphics 630 (Mobile)
Flags: bus master, fast devsel, latency 0, IRQ 154
Memory at e400 (64-bit, non-prefetchable) [size=16M]
Memory at a000 (64-bit, prefetchable) [size=256M]
I/O ports at 5000 [size=64]
[virtual] Expansion ROM at 000c [disabled] [size=128K]
Capabilities:
Kernel driver in use: i915
Kernel modules: i915
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1fb8 (rev a1)
(prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 860f
Flags: bus master, fast devsel, latency 0, IRQ 207
Memory at e500 (32-bit, non-prefetchable) [size=16M]
Memory at 8000 (64-bit, prefetchable) [size=256M]
Memory at 9000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Expansion ROM at e608 [disabled] [size=512K]
Capabilities:
Kernel driver in use: nouveau
Kernel modules: nouveau
$ optirun glxinfo|egrep "OpenGL vendor|OpenGL renderer"
[ 921.728466] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Unknown
chipset: NV167
[ 921.728481] [ERROR]Aborting because fallback start is disabled.
# lshw -C display
*-display
description: VGA compatible controller
product: NVIDIA Corporation
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
resources: irq:207 memory:e500-e5ff memory:8000-8fff
memory:9000-91ff ioport:4000(size=128) memory:e608-e60f
*-display
description: VGA compatible controller
product: Intel Corporation
vendor: Intel Corporation
physical id: 2
bus info: pci@:00:02.0
version: 02
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:154 memory:e400-e4ff memory:a000-afff
ioport:5000(size=64) memory:c-d
Might help some people:
https://gist.github.com/szpak/71081b40217fb27c7a565b8c7b972067
The same error happens with only the intel vga enabled in the bios,
so this is not bumblebee or alike related.
hth,
Wim
-- System Information:
Debian Release: 10.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.4.0-0.bpo.4-amd64 (SMP w/16 CPU cores)
Locale: LANG=nl_BE.UTF-8, LC_CTYPE=nl_BE.UTF-8 (charmap=UTF-8),
LANGUAGE=nl_BE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Bug#953802: linux-headers-5.4.0-0.bpo.3-common: confirmation
Package: linux-headers-5.4.0-0.bpo.3-common Followup-For: Bug #953802 Hello, I find the same error messages in my logs, random screen freezes seem to happen. the tty keeps working, it is only the X11 default session that freezes, after switching back and forward from a tty i can login again, but the screen then is the same as before, frozen, with only a mouse pointer to move. hth, Wim -- System Information: Debian Release: 10.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 5.4.0-0.bpo.3-amd64 (SMP w/8 CPU cores) Locale: LANG=nl_BE.UTF-8, LC_CTYPE=nl_BE.UTF-8 (charmap=UTF-8), LANGUAGE=nl_BE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled -- no debconf information
Bug#597820: [GIT PULL REQUEST] watchdog - v2.6.37-rc1
Hi Linus, Please pull from 'master' branch of git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git or if master.kernel.org hasn't synced up yet: master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git This will update the following files: drivers/watchdog/Kconfig | 23 +- drivers/watchdog/Makefile |1 drivers/watchdog/bcm63xx_wdt.c | 350 + drivers/watchdog/f71808e_wdt.c | 10 + drivers/watchdog/iTCO_wdt.c| 26 +-- drivers/watchdog/it8712f_wdt.c | 25 +- drivers/watchdog/it87_wdt.c| 96 +++ drivers/watchdog/machzwd.c |4 8 files changed, 479 insertions(+), 56 deletions(-) with these Changes: Author: Prarit Bhargava pra...@redhat.com Date: Wed Oct 27 09:50:22 2010 -0400 watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init code The iTCO_wdt driver erroneously releases the pci_dev, and causes PCI hotremove to fail because of an incorrect usage count. The probe for this driver does a for_each_pci_dev() which gets a reference for a pci_dev when iTCO_wdt_init() is successful. The for_each_pci_dev() loop puts a reference for a pci_dev when iTCO_wdt_init() fails, so the iTCO_wdt_init() does not need to do any pci_dev_put()'s. The only pci_dev_put() that is required is in the iTCO_wdt_cleanup() function. Signed-off-by: Prarit Bhargava pra...@redhat.com Signed-off-by: Wim Van Sebroeck w...@iguana.be Author: Florian Fainelli flor...@openwrt.org Date: Sat Aug 28 22:03:45 2010 +0200 watchdog: add support for Broadcom BCM63xx built-in watchdog This patch adds support for the Broadcom BCM63xx SoC built-in watchdog, it uses one of the BCM63xx hardware timer id. Signed-off-by: Miguel Gaio miguel.g...@efixo.com Signed-off-by: Florian Fainelli flor...@openwrt.org Signed-off-by: Wim Van Sebroeck w...@iguana.be Author: Giel van Schijndel m...@mortis.eu Date: Mon Oct 4 10:45:28 2010 +0200 watchdog: f71808e_wdt: add support for the F71889FG Signed-off-by: Giel van Schijndel m...@mortis.eu Signed-off-by: Wim Van Sebroeck w...@iguana.be Author: Nicolas Kaiser ni...@nikai.net Date: Sat Oct 9 14:19:46 2010 +0200 watchdog: MachZ: fix debug macro Fix debug macro line wrapping. Signed-off-by: Nicolas Kaiser ni...@nikai.net Signed-off-by: Wim Van Sebroeck w...@iguana.be Author: Timo Juhani Lindfors timo.lindf...@iki.fi Date: Thu Sep 30 17:08:04 2010 +0300 watchdog: it8712f_wdt: Add module parameter for alternative reset sources On iEi PCISA-9652-R10 (BIOS version 1.5) single board computer reads from the game port do not seem to reset the watchdog timer. This patch adds a module parameter wdt_config_reg to specify alternative reset sources. At least WDT_RESET_KBD has been tested, even just running while true; do setleds -L +scroll sleep 1 setleds -L -scroll sleep 1 done is enough to keep the watchdog happy. Signed-off-by: Timo Juhani Lindfors timo.lindf...@iki.fi Signed-off-by: Wim Van Sebroeck w...@iguana.be Author: Timo Juhani Lindfors timo.lindf...@iki.fi Date: Thu Sep 30 17:08:03 2010 +0300 watchdog: it8712f_wdt: Add comments for config/control register names Signed-off-by: Timo Juhani Lindfors timo.lindf...@iki.fi Signed-off-by: Wim Van Sebroeck w...@iguana.be Author: Ondrej Zajicek santi...@crfreenet.org Date: Tue Sep 14 02:54:16 2010 +0200 watchdog: it87_wdt: Add support for watchdogs with 8b timers This patch adds support for watchdogs with 8b timers, like ones in IT8702F and older revisions of IT8712F Super IO chip, to it87_wdt driver. This patch should be used after the patch 'it87_wdt: Add support for IT8720F watchdog'. Signed-off-by: Ondrej Zajicek santi...@crfreenet.org Signed-off-by: Wim Van Sebroeck w...@iguana.be Signed-off-by: Andrew Morton a...@linux-foundation.org Author: Ondrej Zajicek santi...@crfreenet.org Date: Tue Sep 14 02:47:28 2010 +0200 watchdog: it87_wdt: Add support for IT8720F watchdog This simple patch adds support for a watchdog in IT8720F Super IO chip to it87_wdt driver. Signed-off-by: Ondrej Zajicek santi...@crfreenet.org Signed-off-by: Wim Van Sebroeck w...@iguana.be Signed-off-by: Andrew Morton a...@linux-foundation.org Author: Joe Perches j...@perches.com Date: Mon Sep 13 21:23:59 2010 -0700 watchdog: Use static const char * const where possible Signed-off-by: Joe Perches j...@perches.com Signed-off-by: Wim Van Sebroeck w...@iguana.be Author: Prarit Bhargava pra...@redhat.com Date: Fri Aug 6 11:41:24 2010 -0400 watchdog: iTCO_wdt: Cleanup warning messages The current iTCO_wdt driver warnings are confusing. Currently when the device driver returns
Bug#267655: kernel-patch-debian-2.6.8: manually applying to 2.6.8.1 source causes -R warning on tg3.c
Package: kernel-patch-debian-2.6.8 Version: 2.6.8-2 Severity: minor Hi, I'm not sure if this is a bug but when I try to apply the patches to my pristine linux-2.6.8 or 2.6.8.1 (after applying 2.6.8-2.6.8.1 patch) sources gives the following error: The next patch would create the file drivers/net/tg3.c, which already exists! Assume -R? [n] greets, Wim -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.8-doogy Locale: LANG=nl_BE, LC_CTYPE=nl_BE Versions of packages kernel-patch-debian-2.6.8 depends on: ii bzip2 1.0.2-1A high-quality block-sorting file -- no debconf information
