Bug#308946: kernel-source-2.6.11: megaraid data corruption on amd64/em64t
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jurij Smakov wrote: Hi guys, Hi, Jurij, As the kernels against which this bug has been reported are not in the archive any more, we would appreciate if you could provide the updated information, testing whether the bug still exist in the latest kernels. Otherwise I'll close the bug a week from now (Sunday, April 2nd, 2006). My data integrity problem disappeared after the system provider replaced the zero-channel controller. Sorry for not informing you earlier. Later I upgraded the kernel and 2.6.15 is running just fine right now. It was not the kernel to blame. As of the ide-generic causing aacraid to hang, right now the machine loads generic after aacraid and I see no problems whatsoever. Can't try loading generic before aacraid, since the box is already in production. Thanks for cleaning BTS :) dam -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEJqfAHqjlqpcl9jsRAtIRAKCFWBocd7g6Y+vOofcO2o4dVP3t3gCgr2Hw sxnIWfVLFTuApUWlGOYWklk= =7Pwu -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#308946: kernel-source-2.6.11: megaraid data corruption on amd64/em64t
Damyan Ivanov wrote: My data integrity problem disappeared after the system provider replaced the zero-channel controller. Sorry for not informing you earlier. Later I upgraded the kernel and 2.6.15 is running just fine right now. It was not the kernel to blame. Oh, my conclusion was way too quick. Under load sha1sum still fails: $ for i in 1 2 3 ; do echo --; sha1sum credo.fbk.gz; sha1sum credo.fdb; done -- 2ab45a4359ae6a089daeca59dad4f36525a0d5c5 credo.fbk.gz ae59d94a346e186141372962525043f1a8b13866 credo.fdb -- 029320e50c982765f49812a372d07b6ea0b29996 credo.fbk.gz ae59d94a346e186141372962525043f1a8b13866 credo.fdb -- 2ab45a4359ae6a089daeca59dad4f36525a0d5c5 credo.fbk.gz ae59d94a346e186141372962525043f1a8b13866 credo.fdb $ for i in 1 2 3 ; do echo --; sha1sum credo.fbk.gz; sha1sum credo.fdb; done -- 2ab45a4359ae6a089daeca59dad4f36525a0d5c5 credo.fbk.gz ae59d94a346e186141372962525043f1a8b13866 credo.fdb -- 2ab45a4359ae6a089daeca59dad4f36525a0d5c5 credo.fbk.gz ae59d94a346e186141372962525043f1a8b13866 credo.fdb -- 2ab45a4359ae6a089daeca59dad4f36525a0d5c5 credo.fbk.gz cfd18225b91bcdcbc8e12a7737742949c8db679e credo.fdb $ uname -a Linux kovo 2.6.15-1-amd64-k8-smp #2 SMP Tue Mar 7 07:22:38 UTC 2006 x86_64 GNU/Linux $ lspci :00:01.0 PCI bridge: Advanced Micro Devices [AMD]: Unknown device 7458 (rev 11) :00:01.1 PIC: Advanced Micro Devices [AMD]: Unknown device 7459 (rev 11) :00:02.0 PCI bridge: Advanced Micro Devices [AMD]: Unknown device 7458 (rev 11) :00:02.1 PIC: Advanced Micro Devices [AMD]: Unknown device 7459 (rev 11) :00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) :00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) :00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) :00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) :00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) :00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge :00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge :00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge :00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge :00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge :00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge :00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge :00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge :01:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) :01:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) :01:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) :02:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) :02:03.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) :03:01.0 RAID bus controller: Adaptec AAC-RAID (rev 02) dmesg output attached gzipped. Thanks, dam dmesg.gz Description: GNU Zip compressed data signature.asc Description: OpenPGP digital signature
Bug#308946: kernel-source-2.6.11: megaraid data corruption on amd64/em64t
Hi guys, As the kernels against which this bug has been reported are not in the archive any more, we would appreciate if you could provide the updated information, testing whether the bug still exist in the latest kernels. Otherwise I'll close the bug a week from now (Sunday, April 2nd, 2006). Thanks and best regards, Jurij Smakov[EMAIL PROTECTED] Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#308946: kernel-source-2.6.11: megaraid data corruption on amd64/em64t
Hi all! Could one of you please retest with a current kernel (testing:2.6.12, unstable:2.6.14)? Additionally, please send in output for these commands: dmesg lspci lspci -n lsmod Thanks, David -- - hallo... wie gehts heute? - *hust* gut *rotz* *keuch* - gott sei dank kommunizieren wir über ein septisches medium ;) -- Matthias Leeb, Uni f. angewandte Kunst, 2005-02-15
Bug#308946: kernel-source-2.6.11: megaraid data corruption on amd64/em64t
Package: kernel-source-2.6.11 Version: 2.6.11-3 Severity: important When running an em64t kernel with either the megaraid driver or the newer megaraid_mbox driver, and the machine in question has 4GiB of memory, reads/writes past the 130GiB mark (approximately) of a partition on the logical scsi device presented by the raid card[0] were not consistent. In 32 bit mode (with or without PAE) and in 64 bit mode but with only 2GiB of memory installed, everything was fine. In problem mode, dd'ing data onto the device, dd'ing it straight back out, and comparing the md5sums showed the data to be different. [ I have the / and /usr from the amd64 debain install so I can still get at the kernel image, config and so forth but it is a live system so I can't really boot into the amd64 setup anymore. ] -- System Information Debian Release: 3.1 Kernel Version: Linux thebes 2.6.11-1-p4-ht-smp-pae #1 SMP Mon May 9 13:57:02 BST 2005 i686 GNU/Linux Versions of the packages kernel-source-2.6.11 depends on: ii binutils 2.15-5 The GNU assembler, linker and binary utiliti ii bzip2 1.0.2-6high-quality block-sorting file compressor - ii coreutils 5.2.1-2The GNU core utilities ii coreutils 5.2.1-2The GNU core utilities ^^^ (Provides virtual package fileutils) [0] RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) ===File /em64t/boot/config-2.6.11-p4-em64t-smp-02=== # # Automatically generated make config: don't edit # Linux kernel version: 2.6.11-p4-em64t-smp-02 # Mon May 9 14:47:43 2005 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_HPET_TIMER=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y # # General setup # CONFIG_LOCALVERSION= CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_LOG_BUF_SHIFT=15 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Processor type and features # # CONFIG_MK8 is not set CONFIG_MPSC=y # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_MICROCODE=m CONFIG_X86_MSR=m CONFIG_X86_CPUID=m CONFIG_X86_HT=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y CONFIG_SMP=y # CONFIG_PREEMPT is not set CONFIG_SCHED_SMT=y # CONFIG_K8_NUMA is not set # CONFIG_NUMA_EMU is not set # CONFIG_NUMA is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_NR_CPUS=8 CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y # # Power management options # # CONFIG_PM is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_UNORDERED_IO is not set # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PC-card bridges # # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_UID16=y # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m CONFIG_PARPORT_SERIAL=m CONFIG_PARPORT_PC_FIFO=y #