Bug#622842: firmware-brcm80211: not getting an associated point
Dear all, After installing CRDA I am not able to have regulatory domain = EU in brcm80211 .Consequently, I cannot connect to any 2.472 GHz wifi. The dmesg log is the following (from just before modprobe brcm80211 in a way that you can see the good regulatory domain for cfg80211 !!!; see specially [ 76.098256]): [ 57.916230] cfg80211: Calling CRDA to update world regulatory domain [ 58.003989] cfg80211: World regulatory domain updated: [ 58.003994] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 58.003998] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 58.004021] cfg80211: (2457000 KHz - 2482000 KHz @ 2 KHz), (300 mBi, 2000 mBm) [ 58.004025] cfg80211: (2474000 KHz - 2494000 KHz @ 2 KHz), (300 mBi, 2000 mBm) [ 58.004028] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 58.004031] cfg80211: (5735000 KHz - 5835000 KHz @ 4 KHz), (300 mBi, 2000 mBm) [ 58.004171] cfg80211: Calling CRDA for country: EU [ 58.009303] cfg80211: Regulatory domain changed to country: EU [ 58.009308] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 58.009312] cfg80211: (2402000 KHz - 2482000 KHz @ 4 KHz), (N/A, 2000 mBm) [ 58.009315] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (N/A, 2000 mBm) [ 58.009318] cfg80211: (525 KHz - 533 KHz @ 4 KHz), (N/A, 2000 mBm) [ 58.009321] cfg80211: (549 KHz - 571 KHz @ 4 KHz), (N/A, 2700 mBm) [ 75.961782] brcm80211: module is from the staging directory, the quality is unknown, you have been warned. [ 75.967427] brcm80211 :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 75.967435] brcm80211 :03:00.0: setting latency timer to 64 [ 76.012899] Found chip type AI (0x13814313) [ 76.016022] Changing max_res_mask to 0x [ 76.016024] Changing min_res_mask to 0x200d [ 76.022133] Applying 4313 WARs [ 76.023030] wlc_bmac_attach:: deviceid 0x4727 nbands 1 board 0x51a macaddr: 88:25:2c:4e:9e:34 [ 76.097426] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 76.098256] wl_set_hint: Sending country code US to MAC80211 [ 76.098263] wl0: Broadcom BCM43xx 802.11 MAC80211 Driver (1.82.8.0) (Compiled at 04:19:31 on Apr 7 2011) [ 76.098566] cfg80211: Calling CRDA for country: US [ 76.110176] cfg80211: Current regulatory domain intersected: [ 76.110180] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 76.110184] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (N/A, 2000 mBm) [ 76.110187] cfg80211: (517 KHz - 525 KHz @ 4 KHz), (N/A, 1700 mBm) [ 76.110191] cfg80211: (525 KHz - 533 KHz @ 4 KHz), (N/A, 2000 mBm) [ 76.110194] cfg80211: (549 KHz - 560 KHz @ 4 KHz), (N/A, 2000 mBm) [ 76.110197] cfg80211: (565 KHz - 571 KHz @ 4 KHz), (N/A, 2000 mBm) -- Thank you for your help. Wenceslao Wenceslao González-Viñas w...@fisica.unav.es ha escrito: Here it is: result from lspci -vv: - 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Broadcom Corporation Device 051a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d030 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME- Capabilities: [58] Vendor Specific Information: Len=78 ? Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: Data: Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 4us, L1 64us ClockPM+ Surprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
Bug#622842: firmware-brcm80211: not getting an associated point
On Fri, 2011-04-29 at 16:48 +0200, Wenceslao González-Viñas wrote: Dear all, After installing CRDA I am not able to have regulatory domain = EU in brcm80211 .Consequently, I cannot connect to any 2.472 GHz wifi. The dmesg log is the following (from just before modprobe brcm80211 in a way that you can see the good regulatory domain for cfg80211 !!!; see specially [ 76.098256]): [...] It looks like the device has a country code of US. It could be that the driver is not reading the country code correctly, though. Where did you buy this hardware? Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse. signature.asc Description: This is a digitally signed message part
Bug#622842: firmware-brcm80211: not getting an associated point
In Spain (PC - City company). It is a Dell Inspiron M101z (service tag CHL0SM1) . BTW, in Windows 7, it worked perfectly. But I removed it installing Debian Wheezy. Best and thanks, Wenceslao Ben Hutchings b...@decadent.org.uk ha escrito: On Fri, 2011-04-29 at 16:48 +0200, Wenceslao González-Viñas wrote: Dear all, After installing CRDA I am not able to have regulatory domain = EU in brcm80211 .Consequently, I cannot connect to any 2.472 GHz wifi. The dmesg log is the following (from just before modprobe brcm80211 in a way that you can see the good regulatory domain for cfg80211 !!!; see specially [ 76.098256]): [...] It looks like the device has a country code of US. It could be that the driver is not reading the country code correctly, though. Where did you buy this hardware? Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse. -- Wenceslao González-Viñas e-mail: w...@fisica.unav.es http://fisica.unav.es/~wens/ (personal) http://fisica.unav.es/gmm/ (group) FAX:+34 948.425.649 phn:+34 948.425.600 ext:6385 / 6603 Depto. Física y Matemática Aplicada Facultad de Ciencias Universidad de Navarra c/Irunlarrea s/n E-31080 Pamplona, Navarra, Spain Este mensaje ha sido enviado desde https://webmail.unav.es -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110429173944.10906p14p6bdi...@webmail.unav.es
Bug#622842: firmware-brcm80211: not getting an associated point
reassign 622842 linux-2.6 stop On Fri, Apr 15, 2011 at 09:07:30AM +0200, Wenceslao wrote: Package: firmware-brcm80211 Version: 0.29 Severity: important module brcm80211 is not getting the associated point of a wifi, although it is properly detected. With a usb wifi stick (a ralink one) is detecting and attaching properly. so you properly know the module and report against firmware, *woow*. attach relevant dmesg or lspci output unless proven as currently this can be close right away. kind regards -- maks -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110415081334.gd1...@vostochny.stro.at
Processed: Re: Bug#622842: firmware-brcm80211: not getting an associated point
Processing commands for cont...@bugs.debian.org: reassign 622842 linux-2.6 Bug #622842 [firmware-brcm80211] firmware-brcm80211: not getting an associated point Bug reassigned from package 'firmware-brcm80211' to 'linux-2.6'. Bug No longer marked as found in versions firmware-nonfree/0.29. stop Stopping processing here. Please contact me if you need assistance. -- 622842: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=622842 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.130285522031467.transcr...@bugs.debian.org
Bug#622842: firmware-brcm80211: not getting an associated point
Here it is: result from lspci -vv: - 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Broadcom Corporation Device 051a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d030 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME- Capabilities: [58] Vendor Specific Information: Len=78 ? Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: Data: Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 4us, L1 64us ClockPM+ Surprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [13c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb:Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0:Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb:Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 00-00-2c-ff-ff-4e-88-25 Capabilities: [16c v1] Power Budgeting ? --- and result from dmesg: [ 330.205983] brcm80211: module is from the staging directory, the quality is unknown, you have been warned. [ 330.212186] brcm80211 :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 330.212195] brcm80211 :03:00.0: setting latency timer to 64 [ 330.268237] Found chip type AI (0x13814313) [ 330.271328] Changing max_res_mask to 0x [ 330.271330] Changing min_res_mask to 0x200d [ 330.277446] Applying 4313 WARs [ 330.278330] wlc_bmac_attach:: deviceid 0x4727 nbands 1 board 0x51a macaddr: 88:25:2c:4e:9e:34 [ 330.283578] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 330.285363] wl_set_hint: Sending country code US to MAC80211 [ 330.285371] wl0: Broadcom BCM43xx 802.11 MAC80211 Driver (1.82.8.0) (Compiled at 04:19:31 on Apr 7 2011) [ 330.365121] ADDRCONF(NETDEV_UP): wlan0: link is not ready -- By the way, before I used 'modprobe cfg80211 ieee80211_regdom=EU' . Perhaps the problem comes from that and line (dmesg) 330.285363 ? I need channel 13 ... Best regards and thanks, Wenceslao maximilian attems m...@stro.at ha escrito: reassign 622842 linux-2.6 stop On Fri, Apr 15, 2011 at 09:07:30AM +0200, Wenceslao wrote: Package: firmware-brcm80211 Version: 0.29 Severity: important module brcm80211 is not getting the associated point of a wifi, although it is properly detected. With a usb wifi stick (a ralink one) is detecting and attaching properly. so you properly know the module and report against firmware, *woow*. attach relevant dmesg or lspci output unless proven as currently this can be close right away. kind regards -- maks Este mensaje ha sido enviado desde https://webmail.unav.es -- To UNSUBSCRIBE, email to
Bug#622842: firmware-brcm80211: not getting an associated point
Package: firmware-brcm80211 Version: 0.29 Severity: important module brcm80211 is not getting the associated point of a wifi, although it is properly detected. With a usb wifi stick (a ralink one) is detecting and attaching properly. Best regards and thank you, Wenceslao -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-2-amd64 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash firmware-brcm80211 depends on no packages. firmware-brcm80211 recommends no packages. Versions of packages firmware-brcm80211 suggests: ii initramfs-tools 0.98.8 tools for generating an initramfs ii linux-image-2.6.38-2-amd64 [l 2.6.38-3 Linux 2.6.38 for 64-bit PCs -- no debconf information -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110415070730.4178.6175.reportbug@calpurnia
